CCTV Fixed dome cameras: for discreet around-the

CCTV Fixed dome cameras: for discreet around-the
CCTV
Fixed dome cameras:
for discreet around-theclock surveillance
Answers for infrastructure.
The right model for every
situation: fixed dome cameras
by Siemens
This attractive range of aesthetically appealing dome cameras includes
6 different models for monitoring indoor and outdoor areas. The diverse
monofocal, varifocal and vandal-resistant models are intended for use
wherever discreet, unobtrusive surveillance is needed, such as in retail
stores, restaurants, foyers of hotels, warehouses, petrol stations and
other commercial premises.
Schools
2
True 24 hour monitoring
with excellent image quality
Day/night models with mechanical
IR cut filter for true 24 hour
monitoring
All day/night models boast a mechanical
infrared cut filter to ensure true colour
reproduction. They not only provide the
highest quality colour images by day, as
when using infrared lighting, they also
produce great monochrome pictures at
night.
Vandal-resistant, with an IP66 protection rating for outdoor use
The vandal-resistant models are enclosed
in a die-cast, heavy-duty aluminium
housing, with a high-impact polycarbonate bubble that can withstand an accidental or deliberate blow-up of up to
1000 kg. These models have an IP66
protection rating for outdoor use in
all weather conditions.
Greater viewing angle
All varifocal models are equipped with
auto-iris lens. These lenses have 76.9°
viewing angle. However, the vandal-resistant, varifocal model CVWC1325 also has
a 100.2° viewing angle, so that the dome
can be mounted in the corner of a room
and see everything.
Hotel foyers
All models IP enabled by combination with an IP base
Access to the cameras is possible from
any PC with an Ethernet connection and
a standard Web browser simply combining
the dome cameras with an IP base –
makes an attractive unit capable of integration with the full spectrum of IP solutions on an Ethernet network.
Highlights
Versatile configuration via remote
setup kit
All day/night and colour models can be
remotely programmed using the remote
setup kit.
Day/night models with mechanical
IR cut filter for true 24 hour
monitoring
Service monitor cable for in-situ
setup
The configuration, alignment and setting
of the camera view can be done directly
on location using a test monitor. This
facilitates operational setup of the camera, requires less effort and is therefore
quicker and easier to install.
Vandal-resistant models, with an IP66
protection rating for outdoor use
Full 360° setup for pan, tilt and
rotation
All models can be adjusted perfectly in
each installation, whether ceiling or
wall mounted, with 360° pan, tilt and
rotation.
Service monitor connector for
in-situ setup
All models IP enabled in combination with an IP base
Versatile configuration via remote
setup kit
Full 360° setup for pan, tilt and
rotation
Commercial premises
3
The right functionality for every situation
Monofocal, fixed dome camera
The Siemens fixed dome range includes
stylish internal monofocal model with
1/3’’ CCD and 3.7 lens, with standard
high-resolution colour imaging.
This is an attractive camera with clear or
tinted bubble and includes service monitor connector and cable for connection to
a portable monitor, ensuring a quick setup and easy installation. CFFC1317 model has an RS232 port to connect to PC, to
allow easy remote setup via the optional
remote setup kit.
Accessories include tinted bubbles, replacement clear bubbles, remote setup
kit, plus 2.9 mm, 6 mm and 12 mm lenses interchangeable with the original 3.7
mm lens supplied as standard.
Varifocal, fixed dome cameras
In addition to the monofocal domes, the
internal range also includes two simple,
stylish varifocal models all 1/3“ CCD with
a 3.7–12 mm, auto-iris lens. Variables include a choice of high-resolution colour
or day/night imaging, IR-sensitive operation (the CFVS1317 has a mechanical infrared cut filter which ensures perfect
colour reproduction performance during
the day and when used with an infrared
illuminator, as lighting levels fall – will
switch automatically to monochrome at
night to give crisp, sharp images 24
hours a day).
Both the colour and day/night models
can be connected to a PC via a remote
adapter, for remotely setting up various
parameters and downloading/uploading
these. Accessories include clear bubbles,
replacement tinted bubbles and remote
setup kit.
Vandal-resistant, varifocal, fixed
dome cameras IP66
To complete the range, allowing both
internal and external installations, are
three vandal-resistant varifocal models
all with an auto-iris lens and rated IP66 in
Monofocal, fixed dome cameras
Day/night models automatically change from colour pictures by day, to monochrome
pictures at night – true 24 hour surveillance!
These monofocal, fixed dome cameras
are best suited to smaller video surveillance installations in locations such as:
smaller shops, stores and offices
schools
hotels
restaurants
petrol stations
4
1000 kg high impact, polycarbonate bubble and heavy-duty, die-cast, aluminium
enclosure.
In monochrome mode the camera is IR
sensitive and delivers ideal images, also
with IR illumination.
The robust construction of this camera is
specifically designed to work faultlessly
even in vandalism encountered areas.
They are all attractive high-resolution
cameras with tinted bubbles which can
be ceiling-mounted or wall-mounted for
360° setup (pan, tilt and rotation) and
include service monitor connection and
cable for local, easy installation. Flexible
mounting options include flush ceiling
mount or the use of a wall mount bracket
to keep the dome horizontal.
Variables include a choice of colour or
day/night imaging, IR-sensitive operation
(the CVVS1317 has a mechanical infrared
cut filter which ensures perfect colour reproduction performance during the day
and when used with an infrared illuminator, as lighting levels fall – will switch automatically to monochrome at night to
give crisp, sharp images 24 hours a day).
The software allows easy programming,
then uploading of these settings to the
camera, or reading settings from the
camera and saving them to the PC.
All high-resolution colour and day/night
models (monofocal and varifocal, as well
as vandal-resistant) are certified according to the German BGV with “UVV Kassen“
and are therefore ideal for banking applications.
Also included as standard is an RS232
cable with remote setup software for use
with the colour and day/night models.
1000 kg impact-resistant and IP66
protection rating
Varifocal, fixed dome cameras
These varifocal, fixed dome cameras are
best suited to larger, indoor video surveillance installations in locations such as:
larger shops, stores and offices
flexible viewing installations
shopping centres
Vandal-resistant, varifocal,
fixed dome cameras
These rugged, vandal-resistant, varifocal,
fixed dome cameras are best suited to
indoor or outdoor video surveillance
installations – wherever the possibility of
wilful or malicious damage may occur –
such as:
railway, bus and coach stations
airports, docks
leisure centres, sports grounds and
concert venues
shopping centres and cinema car parks
banking halls and inside ATM kiosks
on the outside of offices, public
buildings
5
The entire range of fixed dome
cameras is IP enabled when using
the optional IP module, which
allows images to be transmitted
over an Ethernet network.
RJ45
–
GND ~
+
~
CVVA-IP +
vandal-resistant dome
camera
The SISTORE MX NVS software
allows up to 16 IP cameras to be
displayed and digitally recorded on
a PC. It is also possible to configure
cameras using the software.
DC12V
AC24V
SISTORE MX NVS
software
VIDEO
CCIS1337 is a true hybrid IP camera
from Siemens with both BNC and
Ethernet connections.
CFVA-IP +
fixed dome
CCIS1337
TCP/IP
network
Up to 32 IP cameras can be connected to the SISTORE MX system. Doing
so allows true digital the recording
of the cameras and displaying them
on a VGA monitor, and also provides
the full functionality of the digital
video recorder, such as motion and
sabotage detection or alarm generation.
Access to the IP cameras is possible
from any PC connected to an Ethernet network and equipped with a
standard Web browser.
SISTORE MX
Power
Error
Camera
Recording
Harddisk
SISTORE MX
Web browser
All fixed dome models IP enabled
by Hybrid Technology from Siemens
The complete range of fixed dome models are IP enabled due to Hybrid Technology from Siemens. This is truly the best
of both worlds, as a standard analogue
BNC connection is present for use in
traditional video surveillance systems.
However, with Hybrid Technology, the
cameras are future-proof, because
as the system is transferred to digital
(i.e. swapped from coaxial cable to
Ethernet transmission), the cameras
can be combined with an IP module
with an Ethernet connector, to allow
direct connection to the network.
Siemens IP cameras capture and send live
streaming video directly over an IP
network that enables users to view and
manage the camera using a standard
Web browser or SISTORE NVR (Network
Video Recorder) software on any local or
remote computer on a network. Therefore transmission distances are no longer
a problem.
6
Installation
An IP based Ethernet network infrastructure is often already in place, which
means the IP camera can easily be connected to the nearest network connection. Simply set the IP address and you’re
up and running! Adding more IP cameras
to the system is as easy as the first one.
SISTORE MX NVS – Network
Video Software
SISTORE MX NVS software allows all the
functionality of the highly successful
SISTORE MX digital recording system to
take place directly on a PC. This means it
is possible to record IP cameras on a PC,
via password access to restrict the viewing of the cameras and utilise the many
multi-screen viewing formats possible
(up to 32 IP cameras can be recorded and
viewed simultaneously). Of course, if
required, it is still possible to manage any
alarms connected, or make use of the
in-built motion detection and sabotage
detection alarms.
SISTORE MX NVR – unique, highly
available Network Video Recorder
The ultra-modern, industry-oriented
Network Video Recorder SISTORE MX NVR
supports recording and management of
up to 16 IP cameras, plus functionalities
like motion detection, sabotage protection and a self monitoring system.
Access to IP cameras via SISTORE MX NVS
software
Technical
overview
Monofocal
Varifocal
CFFC1317
CFVS1317
CFVC1317
Colour
Day/night
Colour
CCD size
1/
TV lines
540
540
540
Resolution
High
High
High
Manual iris
3.7 mm
Auto-iris
3.7 mm ~ 12 mm
Auto-iris
3.7 mm ~ 12 mm
70°
22.7° ~ 76.9°
22.7° ~ 76.9°
Lens type
Focal length
Horizontal angle of view
Minimum illumination (@ 50 IRE)
– Clear bubble
1/
3’’
0.29 Lux (colour)/
0.21 Lux (mono)
0.53 Lux (colour)/
0.43 Lux (mono)
0.13 Lux
0.26 Lux
– Tinted bubble
3’’
1/
3’’
0.24 Lux
0.46 Lux
Dual power 12 V DC / 24 V AC
TV standard
S/N ratio
PAL
PAL
PAL
> 50 dB
> 50 dB
> 50 dB
Back light compensation (BLC)
Colour/monochrome switchable
Infrared cut filter
Mechanical
Automatic gain control (AGC)
Auto /
1/50~1/100,000 s
Electronic shutter
Auto /
1/50~1/100,000 s
Auto /
1/50~1/100,000 s
Line lock synchronisation
Remote programming
RS232 interface
Local service monitor connector
Wall or ceiling mount
Vandal protection rating
Options
CFFA-TD
CFFA-CD
CFFA-IC29
CFFA-IC37
CFFA-IC60
CFFA-IC12
CFFA-RS
Tinted bubble
Clear bubble
2,9 mm lens
3,7 mm lens
6 mm lens
12 mm lens
Remote
setup kit
CFFC1317
CFVS1317
delivered
with product
CFVC1317
CVVS1317
delivered
with product
CVVC1317
delivered
with product
CVWC1325
7
Vandal-restistant, varifocal
CVVS1317
CVVC1317
CVWC1325
CVWC1325 dome offers greater viewing
angle.
Day/night
1/
Colour
1/
3’’
3’’
Colour
1/
3’’
100.2°
(CMOS, PIXIM)
540
540
500
High
High
High
Auto-iris
3.7 mm ~ 12 mm
Auto-iris
3.7 mm ~ 12 mm
Auto-iris
2.8 mm ~ 10 mm
22.7° ~ 76.9°
22.7° ~ 76.9°
27.4° ~ 100.2°
0.29 Lux (colour)/
0.21 Lux (mono)
0.53 Lux (colour)/
0.43 Lux (mono)
27.4°
0.24 Lux
0.6 Lux (F1.3)
0.46 Lux
PAL
PAL
PAL or NTSC
> 50 dB
> 50 dB
> 50 dB
Software allows programming of
six different modes of back light
compensation.
Mechanical
Auto /
1/50~1/100,000 s
Auto /
1/50~1/100,000 s
RS485
IP66, 1000 kg
IP66, 1000 kg
IP66, 1000 kg
Vandal-resistant models
mounting options
Ceiling mount
CVVA-FMIP
CVVA-CD
CVVA-WMIP
CFVA-BA
CFVA-IP
CVVA-IP
Wall mount
Flush mount kit
Clear bubble
Wall mount bracket Indoor dome base
(vandal-resistant)
IP module
(fixed dome
cameras)
IP module
(vandal-resistant
dome cameras)
Flush mount
kit
Wall mount
bracket
8
The latest vandal-resistant dome camera
from Siemens uses Pixim technology
The latest Siemens vandal-resistant dome
CVWC1325 uses Pixim®, Inc.’s advanced
“Digital Pixel System®” technology (DPS)
to offer outstanding performance under
extreme lighting conditions. This technology allows each pixel in the image to act
as an independent camera. Thereby en-
Overexposed image with view outside tunnel
not clearly visible.
9
suring that each pixel receives exactly the
right amount of light and enhancing the
total image to deliver optimum quality.
DPS technology also compensates for
overexposed and underexposed areas in
the image, making it possible for this
Optimised exposure per pixel using Pixim technology
even in areas of shadow or brightly lit zones.
camera to produce richly detailed images
with a resolution that was previously
unattainable. Difficult scenes containing
areas of shadow or brightly lit zones can
now be monitored with confidence.
Answers for infrastructure.
Megatrends driving the future
The megatrends – demographic change,
urbanization, climate change and globalization – are shaping the world today.
These have an unprecedented impact
on our lives and on vital sectors of our
economy.
Innovative technologies to answer
the toughest questions
Throughout a 160-year history of proven
research and engineering talent, with
more than 50,000 active patents, Siemens
has continuously provided its customers
with innovations in the areas of healthcare, energy, industry and infrastructure –
globally and locally.
Siemens Switzerland Ltd
Industry Sector
Building Technologies Division
International Headquarters
Gubelstrasse 22
6301 Zug
Switzerland
Tel +41 41 724 24 24
Siemens Ltd
Industry Sector
Building Technologies Division
885 Mountain Hwy
Bayswater, VIC, 3153
Australia
Tel +61 3 9721 2000
Increase productivity and efficiency
through complete building life cycle
management
Building Technologies offers intelligent
integrated solutions for industry,
commercial and residential buildings and
public infrastructure. Over the entire
facility’s life cycle, our comprehensive and
environmentally conscious portfolio of
products, systems, solutions and services
in the fields of electrical installation technology, building automation, fire safety
and electronic security, ensures the:
– optimum comfort and highest energy
efficiency in buildings,
– safety and security for people,
processes and assets,
– increased business productivity.
Siemens Ltd
Industry Sector
Building Technologies Division
Units 1006-10
10/F, China Resources Building
26 Harbour Road
Wanchai
Hong Kong
Tel +852 2870 7888
Siemens Pte Ltd
Industry Sector
Building Technologies Division
The Siemens Center
60 MacPherson Road
348615
Singapore
Tel +65 6490 6000
Pixim® and Digital Pixel System® are registered trademarks of Pixim, Inc.
The information in this document contains general descriptions of technical options available,
which do not always have to be present in individual cases. The required features should therefore
be specified in each individual case at the time of closing the contract.
Subject to change • Order no. A24205-A336-B561 •
© Siemens Switzerland Ltd • Printed in Switzerland • 20812 Ah
www.siemens.com /cctv
Siemens PLC
Industry Sector
Building Technologies Division
Brecon House
Llantarnam Park
Cwmbran
NP44 3AB
United Kingdom
Tel +44 871 386 0800
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement