Intrunet™ SPC Control Panel SPC6000

Intrunet™ SPC Control Panel SPC6000
ss
Intrunet™ SPC Control
Panel SPC6000
V2.1
Perfect building protection inside and outside
„
„
„
„
„
„
„
„
„
„
„
„
„
„
„
„
„
Cost effective integration of Intrusion and Access functionality
Investment protection with modular system design
Individual management of up to 512 users
‘True system partitioning’ of up to 60 areas
Reliable monitoring of up to 512 zones
Flexible control of up to 512 free programmable outputs
Powerful management of up to 64 doors (64 readers)
Large event log for up to 10’000 intrusion / 10’000 access events
Full connectivity with tri-path communications (PSTN, GSM, integral IP)
Instant control and safe operation over on-board Web Server
User friendly interfaces with innovative voice annunciation support
Intuitive configuration facilities
Cost saving automated remote servicing and site administration
Reliable high-speed expander bus (X-BUS) with loop topology
Customised processes with advanced functions set
Seamless integration of Intrunet wireless detectors
Certified according to EN50131 (Grade 3)
Answers for infrastructure.
Functionalities
„ Cost effective integration of
intrusion and access functionality
The SPC6000 combines intrusion and
access functionality in the same controller
for a cost effective solution of intrusion
protection and people management in a
commercial building. The powerful and
future oriented controller architecture
(ARM processor) also offers high
performance in connectivity, system
features and Expander bus (X-BUS).
„ Investment protection with modular
system design
The modular system design allows the use
of common SPC-series modules and
expanders across the whole system
family. This facilitates the planning efforts
for the various application sizes and
allows the system to grow with the
customer requirements.
„ ’True system partitioning’ of up to 60
areas with up to 512 users
The SPC panel with its 'true system
partitioning' of up to 60 areas enables
multi-area and multi-tenant applications.
Multi-tenant systems have the capability
to report several uniform resource names
(URN) to central stations (ARC) and enable
private notification (SMS) to specific
users. Up to 512 users can be individually
configured with user rights for access and
intrusion functionality.
„ Reliable monitoring and flexible
control of up to 512 zones and 512
outputs
A total of up to 512 zones and 512
outputs can be programmed as needed by
ticking specific attributes for the chosen
function. This allows individual detection,
control and event notification at
numerous points in a larger building. Up
to 10’000 intrusion events and 10’000
access events across all areas can be
stored in the controller log book.
„ Powerful management of up to 64
doors (64 readers) in 32 door groups
The connected card readers allow an easy
entry or exit with card and/or PIN through
up to 64 entry doors or 32 entry / exit
doors, combined with automatic setting
and unsetting of areas depending on the
individual user rights. The doors can be
enabled with a choice of access functions
such as anti-pass back, custodian or
escort.
„ Instant control and safe operation
over on-board Web Server
The on-board Web server enables users or
engineers to log on remotely from any PC
Web browser and check the system and
zones status, as well as logs and perform
certain programming operations, such as
area setting or unsetting.
2
„ User friendly interfaces with
innovative voice annunciation
support
The SPC keypads provide an easy interface
to locally control SPC systems. The 32character standard keypads with clear text
display provide a modern and functionally
advanced user interface for all type of
standard applications.
The comfort keypad with its large LCD
display and optional voice assistance
functionality is ideal to easy operate all
kind of applications, from simple single
area systems up to complex multi area
systems.
The indication expander offers a flexible
programmable user interface to indicate
any status information on LEDs (e.g. open
zones, area setting states) and to activate
processes (e.g. setting of area, open
garage door). It’s integrated card/tag
reader can be used to unlock indicators or
keys.
The key switch expander enables the
activation of user specific functions (e.g.
setting area, temporary zone bypass,
activate output) and indicates status
information on LEDs (e.g. area setting
state, key switch position, open zone).
Functionalities
„ Full connectivity with tri-path
communications (PSTN, GSM/GPRS,
integral IP)
Central station connectivity is a major part
of the security system. The SPC panels
support PSTN and GSM communication
with all the major communication formats
to standard alarm receivers and IP
communication (Ethernet with GPRS
backup) to SPC Com alarm receiving
software, prioritising of communication
channels based on a predefined strategy.
SPC supports also full connectivity for the
engineer / user with secure authentication
and rights management, via IP
broadband / local area network
(Ethernet), GSM or PSTN networks.
SMS text messaging via GSM module
enhances the ability to notify events or
alarms to the user. Moreover the user can
control the panel via SMS commands via
GSM.
„ Intuitive Configuration Facilities
The SPC panels provide easy and flexible
configuration facilities. Remote
configuration through any of the
communication channels by use of the
on-board Web Server or a PC with SPC Pro
Programming Software minimizes
expensive on-site engineering costs.
If off-site programming is not appropriate,
the PC web browser or SPC Pro can be
used with direct connection to the panel.
Engineer friendly menus with intuitive
interface along with system templates
make the SPC panel to one of the quickest
panels to program. In addition, the SPC
Fast Programmer can simply be plugged
on the SPC controller for setup using preprogrammed configurations.
„ Cost saving automated remote
servicing and site administration
The optional SPCS320 Remote
Maintenance Server ensures a high
service quality at reduced costs. Without
intervention of an engineer the SPC panel
periodically sends automated technical
system checks to a server. The data can be
auto-analysed and printed; an ideal
support for existing or new service
agreements with customers.
And the optional SPCS410 SPC Safe Server
reduces costs to administer a large
installed panel base. The central SPC Safe
server always contains up-to-date
configuration files and provides direct
access for engineers and panels to the
common database. Configuration files can
be easily imported or exported to the
engineers PC and any configuration
changes (e.g. changed PIN) are
automatically transmitted over IP
(Ethernet) to the server.
„ Reliable high-speed Expander Bus
(X-BUS) with loop topology
The high-speed Expander Bus (X-BUS with
307 kB/s) is a fast and reliable backbone
for all system installations with up to 400
m distance between each bus device. The
loop topology protects the system against
possible communication faults caused by
an interrupt or short circuit by isolating
the faulty branch in the loop.
3
„ Seamless integration of Intrunet
wireless detectors and remote
controls
Up to 120 Intrunet wireless detectors and
1 Intrunet remote control per user can be
addressed using the SiWay receivers as RF
access points throughout the system. The
wireless zones can be mixed and match
with wired zones for cost effective
installation with minimal wiring.
„ Certified according to EN50131
(Grade 2 and 3)
The SPC63xx is certified according to the
European standard EN50131, allowing
installations to fully comply with Grade 3.
„ Customized processes with advanced
functions set
With the advanced functions set the SPC
can be adapted to customer specific
processes. The 64 individual calendar
based time channels with multiple on/off
switching patterns allow individual time
control of users, areas, inputs or outputs.
And the Cause&Effects programming
allows activation of outputs based on
freely definable trigger conditions
(combination of status change of zones,
system or area outputs, user PIN, Keypad
Quick Keys, calendars).
The Intrunet SPC panel range is designed to cope with the various project
specific needs regarding intrusion and access functionality, connectivity,
application size or security grade. Thanks to the modular and future oriented
concept the system can grow with increasing customer needs supporting a
long product life cycle.
„ SPC6330.310-L1 Intrusion Control Panel, G3
The SPC6330.310 control panel combines in an optimal way intrusion and access
functionality in one system and can be expanded according to specific customers and
project needs up to 512 zones (8 on-board), 512 outputs (6 on-board), 32 system
keypads, 64 doors. Each zone can be configured for different zone monitoring
requirements with 4K7 resistors as standard, as well as support for a range of other
resistor values. The controller provides 2 X-BUS ports (2 stubs or 1 loop), 60 areas,
512 users with different access levels, memory for 10’000 intrusion and 10'000 access
events, X-10 home automation interface, integral Web Server, 2 terminals for the
pluggable PSTN and GSM communication options, on-board Ethernet interface.
The system is expandable with wireless modules and supports up to 120 Intrunet
wireless detectors (mixed with wired zones) and 1 remote control per user.
The panel complies with EN50131 Grade 3 standard and comes in a tamper protected
and hinged metal cabinet with space for optional 17 Ah battery and 4 additional
expanders.
4
X-BUS
The standard keypad is an iconic 32-character text keypad that is also modern,
aesthetically pleasing and functionally advanced. Support of proximity cards in
the various user interfaces rounds off perfectly the safe and easy operating
concept.
„ SPCK420.100 LCD-Keypad, 2x16 Characters
The SPCK420.100 wired standard LCD keypad provides the user with an iconic Interface
to control the security system. Its 32 character blue backlight display and keyboard
allows control under all lighting conditions.
Navigation of the intuitive menu system is achieved using the central Navigation key.
The keypad also has soft keys and alphanumeric keys that allow contextual key
operation and data input directly from the keypad.
„ SPCK421.100 LCD Keypad, 2x16 Characters, with Card Reader
The SPCK421.100 wired standard LCD keypad provides the user with an iconic Interface
to control the security system. Its 32 character blue backlight display and keyboard
allows control under all lighting conditions.
Navigation of the intuitive menu system is achieved using the central Navigation key.
The keypad also has soft keys and alphanumeric keys that allow contextual key
operation and data input directly from the keypad.
The integrated card reader enables quick setting / unsetting of areas by use of a
proximity card only or in combination with a valid user PIN.
„ Compatible cards and tags
These EM4102 compatible cards are compatible to the devices with integrated card
reader (Keypads SPCK421, SPCK623, SPCE120).
IB42-EM
IB44-EM
EM laminated card without print
Key Tag
5
X-BUS
The innovative comfort keypad with its large display is ideal to easily manage
multiple and single areas, and in addition, the integrated voice annunciation
helps to avoid errors in the day to day operation of the system. The indication
or key switch expander offer application specific status information in one
glance and direct.
„ SPCK620.100 Comfort Keypad
The SPCK620.100 comfort keypad is ideal to operate single area and multi area
applications in a user friendly way.
The 4 soft keys and the multi dimensional navigation key allow an easy operation with a
minimum of operation steps. Status information and possible next operation steps are
clearly represented on the large LCD. Display of customer logo, emergency or quick set
function is possible in idle state.
The functionality can be enhanced with the SPCE110 key switch expander or the
SPCE120 indication expander.
„ SPCK623.100 Comfort Keypad with Audio and Card Reader
The SPCK623.100 comfort keypad is ideal to operate single area and multi area
applications in a user friendly way.
The 4 soft keys and the multi dimensional navigation key allow an easy operation with a
minimum of operation steps. Status information and possible next operation steps are
clearly represented on the large LCD. Display of customer logo, emergency or quick set
function is possible in idle state.
The integrated card reader enables quick setting / unsetting of areas by use of a
proximity card only or in combination with a valid user PIN.
The keypad also supports voice annunciation for safe system operation. The user is
additionally assisted during set / unset procedure or in trouble conditions.
The functionality can be enhanced with the SPCE110 key switch expander or the
SPCE120 indication expander.
6
The indication or key switch expander offer application specific status
information in one glance and direct activation of functions in one operation
step.
„ SPCE110.100 Key switch Expander
The SPCE110.100 is a universal key switch expander with 2 tri-color LEDs, a 3-position
key switch and buzzer.
The freely programmable user interface indicates the configured status information with
LEDs (e.g. key switch position, area setting states) and enables activation of application
specific processes by changing the key switch position (e.g. unlock keypad or indication
expander, setting of an area, open or close a gate).
The expander also provides one freely programmable volt free relay output with either
NO or NC terminal.
„ SPCE120.100 Indication Expander with Card Reader
The SPCE120.100 is a universal display expander with 16 tri-color LEDs, 4 keys,
integrated card reader and buzzer.
In linked mode with a keypad the LEDs indicate the status of 4 areas in one glance and
the areas can be directly set or unset with the assigned function keys.
In flexible mode the freely programmable user interface indicates the configured status
information with LEDs (e.g. open zones, area setting states) and enables activation of
application specific processes by pressing the assigned function keys (e.g. setting of an
area, open or close a gate).
With the integrated card reader the indication or operation can be enabled for
authorised users only by presenting a valid proximity card.
The expander also provides one freely programmable zone which can be configured for
different zone monitoring requirements.
7
X-BUS
All the SPC panels can be expanded up to their maximum number of zones or
outputs using the common system expanders on the X-BUS (expansion bus).
The X-BUS bus supports a maximum distance of 400 meters between each
Expander. A complete range of Expanders covers all the security requirements.
„ SPCE650.100 Expander, 8 Inputs / 2 Outputs
The SPCE650.100 Expander extends the SPC system via X-BUS with 8 wired zones and 2
fully programmable relay outputs. The zones and outputs on the Expander function
exactly as the zones and outputs on the SPC panel.
Each zone can be configured for different zone monitoring requirements. The system
supports 4K7 resistors as standard for monitoring but does support other resistor values.
The outputs are volt free relays that provide both NO and NC terminals allowing the
greatest flexibility.
The Expander comes in a tamper protected housing and features also an X-BUS status
LED and on-board buzzer for easy device identification and extensive self-diagnostic
capabilities.
„ SPCE652.100 Expander, 8 Inputs / 2 Outputs, with Back Tamper
The SPCE652.100 Expander incorporates the same features as the SPCE650.100 but
with the additional benefit of back tamper protection.
„ SPCE450.100 Expander, 8 Relay-Outputs
The SPCE450.100 Expander extends the SPC system via X-BUS with 8 fully
programmable relay outputs.
The outputs are volt free relays that provide both NO and NC terminals allowing the
greatest flexibility.
The Expander comes in a tamper protected housing and features also an X-BUS status
LED and on-board buzzer for easy device identification and extensive self-diagnostic
capabilities.
„ SPCE452.100 Expander, 8 Relay Outputs, with Back Tamper
The SPCE452.100 Expander incorporates the same features as the SPCE450.100 but
with the additional benefit of back tamper protection.
8
Each Expander provides built-in dual-isolators, a signal equalizer and a signal
amplifier for highest X-BUS signal reliability. In loop topology the X-BUS is splitup into two independent spurs in case of a short circuit or interrupt, and no
X-BUS components are lost.
„ SPCP332.300 Smart PSU (7 Ah) with 8 Input / 2 Output Expander
The SPCP332.300 Smart PSU Expander extends the SPC system via X-BUS with a
monitored 12 V DC 2.6 A local power source for connected security devices (e.g.
Expanders on X-BUS) and battery management, 8 wired zones and 2 fully
programmable relay outputs with the same specification as for the SPCE650.100.
The SPCP332.300 comes in a tamper protected metal cabinet with space for an optional
7 Ah battery.
„ SPCP432.300 Smart PSU (7 Ah) with 2-Door Expander
The SPCP432.300 Smart PSU Expander extends the SPC system via X-BUS with a
monitored 12 V DC 2.6 A local power source for connected security devices (e.g.
Expanders on X-BUS) and battery management and advanced door control functionality
for 2 entry doors or 1 entry/exit door with the same specification as for the
SPCA210.100.
The SPCP432.300 comes in a tamper protected metal cabinet with space for an optional
7 Ah battery.
„ SPCP333.300 Smart PSU (17 Ah) with 8 Input / 2 Output Expander
The SPCP333.300 Smart PSU Expander extends the SPC system via X-BUS with a
monitored 12 V DC 2.6 A local power source for connected security devices (e.g.
Expanders on X-BUS) and battery management, 8 wired zones and 2 fully
programmable relay outputs with the same specification as for the SPCE650.100.
The SPCP333.300 comes in a tamper protected hinged metal cabinet with space for an
optional 17 Ah battery and 3 Expanders.
„ SPCP433.300 Smart PSU (17 Ah) with 2-Door Expander
The SPCP433.300 Smart PSU Expander extends the SPC system via X-BUS with a
monitored 12 V DC 2.6 A local power source for connected security devices (e.g.
Expanders on X-BUS) and battery management and advanced door control functionality
for 2 entry doors or 1 entry/exit door with the same specification as for the
SPCA210.100.
The SPCP433.300 comes in a tamper protected hinged metal cabinet with space for an
optional 17 Ah battery and 3 Expanders.
9
X-BUS
The system supports a comprehensive Siemens reader portfolio and different
card technologies for an easy access to areas through up to 64 doors
throughout a building. The door controller manages the door covering both,
intrusion and access requirements, with same infrastructure and configuration.
„ SPCA210.100 2-Door Expander
The SPCA210.100 2-Door Expander extends the SPC6000 with advanced door control
functionality for 2 entry doors or 1 entry/exit door.
The device features 2 Wiegand/Clock&Data interfaces, 4 LED control outputs (1 void / 1
valid per reader), 4 zones (1 position- and 1 opening switch per door), 2 relay outputs (1
lock per door) and an on-board buzzer to signal "door open too long" events. The zones
and outputs function exactly as for the SPC panel.
To allow greatest flexibility, the zones and outputs are freely programmable for other
purposes if not used for door control. Up to 512 priority card holders can be stored on
the expander for standalone operation in case of communication loss to the control
panel.
The Expander comes in a tamper protected housing and features also an X-BUS status
LED for easy device identification and extensive self-diagnostic capabilities.
Wiegand / Clock&Data
AR6181-RX & MX
AR6182-RX & MX
HD500-EM & Cotag
PP500-EM
ARS6311-RX
PR500-EM & Cotag
„ Compatible readers*
The Siemens readers below support the access functionality on the SPCA210.100 in an
optimal way:
− 125 kHz
AR6181-RX
Miro/Hitag serial reader
AR6182-RX
Miro/Hitag reader with keypad
ARS6311-RX
SiPass standalone reader
HD500-EM
Heavy-duty proximity reader
PP500-EM
Heavy duty reader with keypad
PR500-EM
Mullion proximity reader
− Cotag
HD500-Cotag
PR500-Cotag
HF500-Cotag
Heavy-duty proximity reader
Mullion proximity reader
Hands-free reader
− Smart Card
AR6181-MX
AR6182-MX
Multi-technology reader without keypad
Multi-technology reader with keypad
HF500-Cotag
*
Please refer to the corresponding data sheet of card readers for detailed information of technical details (e.g. supported card technologies, supply
voltage) and availability.
10
X-BUS
The signals of Intrunet wireless detectors and remote controls can be received
via any of the connected wireless receivers allowing optimal signal reception
and range extension within an application. And the rollout is done very quickly
via keypad, web browser or the SPC Pro programming tool.
„ SPCW110.000 SiWay RF-Kit for Panel
The SPCW110.000 SiWay RF-Kit for Panel extends the SPC control panel with a wireless
receiver for Intrunet wireless detectors and remote controls in reception range.
The wireless module plugs directly on the main PCB of compatible SPC panels. The kit
also includes a stub antenna to mount on metal cabinets.
„ SPCW130.100 SiWay RF-Expander
The SPCW130.100 SiWay RF-Expander is connected to the X-BUS and provides a range
extension for the Intrunet wireless detectors and remote controls linked to the system.
The Expander comes in a tamper protected housing and features also an X-BUS status
LED and on board buzzer for easy device identification and extensive self-diagnostic
capabilities.
„ SPCK422.100 wired standard LCD keypad with integrated SiWay wireless module
The SPCK422.100 wired standard LCD keypad with integrated SiWay wireless module
provides the user with an iconic Interface to control the security system. Its 32 character
blue backlight display and keyboards allows control under all lighting conditions.
Navigation of the intuitive menu system is achieved using the central Navigation key.
The keypad also has soft keys and alphanumeric keys that allow contextual key
operation and data input directly from the keypad.
The integrated wireless module provides a range extension for the Intrunet wireless
detectors and remote controls linked to the system.
IR60W6-10
IR160W6-10
IR65W6-10
ADM-I12W1
IGBW6-10
IOPW6-11
„ Compatible Intrunet wireless detectors and peripheral devices*
A comprehensive range of wireless SiWay peripherals is supported by the SPC-Series:
IR60W6-10
PIR detector 15 m wide angle
IR160W6-10
PIR detector 18 m, black triplex mirror
IR65W6-10
PIR detector, ceiling mount
ADM-I12W1
PIR wireless 868 MHz detector
IGBW6-10
Glass break detector
IOPW6-11
Smoke detector
IMKW6-10
Magnet contact
IWFW6-10
Flood detectors
IRCW6-11
Remote control
IKPW6-10
Wireless LED keypad
IMKW6-10 IWFW6-10 IRCW6-11 IKPW6-10
*
Please refer to the corresponding data sheet of Intrunet wireless detectors and peripheral devices for compatibility, technical details and availability for
the required country.
11
Alarm Receiving Center
PSTN
IP
Mobile phone
GSM
Service PC
The SPC panels offer multi-path communications via IP, GSM and PSTN. All the
modems modules are pluggable to allow any combination to be used. The
panel supports remote connectivity over all communication options, to provide
engineering functions including configuration or diagnostics, and to the user
the ability to remotely manage the premises.
„ SPCN110.000 PSTN Module, V90
The SPCN110.000 PSTN module (up to 56K) is compatible with the complete SPC panel
rang and plugs directly on the main PCB removing the need for any additional wiring.
The modem can take control of the line and communicates with a central station (ARC)
using common format protocols (SIA, Contact ID etc.). It also supports PPP connection to
SPC Pro Software for remote programming and configuration up-/download.
The PSTN modem can be used as the primary source of communication or as backup to
IP communication or GSM modem.
„ SPCN310.000 GSM Module incl. Antenna
The SPCN310.000 GSM module can be assigned to any mobile network by the insertion
of a standard SIM card. The modem is compatible with the complete range of SPC panels
and plugs directly on the main PCB removing the need for any additional wiring. The
unit comes with an external aerial that fits on the cabinet.
The modem communicates with a central station (ARC) using common format protocols
(SIA, Contact ID etc.) or IP over GPRS to SPC Com alarm receiver. It also supports PPP
connection to SPC Pro Software for remote programming and configuration up/download.
The SMS feature allows user / engineer to be sent a predefined text when selected
events occur in the system. It also allows receiving of predefined SMS commands for
security system control.
The GSM modem can be used as the primary source of communication or as backup to
the PSTN modem or IP communication.
„ SPCW101.000 External Aerial Kit
The SPCW101.000 External Antenna Kit (868 MHz) allows the connection of a GSM or
Wireless module in a cabinet to an externally mounted antenna for best reception level.
The kit comes with a stub antenna, 2 m cable with connectors and a mounting bracket.
The antenna connects to GSM-or Wireless modules with fitted SMA connector for
external antenna option.
12
Clever engineering tools support the fast and easy online or offline
configuration of the SPC control panels. The different methods allow the
engineer to choose the best fitting programming method to application size
and infrastructure.
„ SPCX410.000 SPC Fast Programmer
The SPCX410.000 Fast Programmer provides a simple method of transferring
configuration files from a PC (USB) to an SPC panel through the SPC Pro application and
backing up configuration files from an SPC Panel to the Fast Programmer without direct
PC connection.
This portable device has on-board 1MB flash memory, which typically can store in excess
of 100 configuration files or a new firmware release for on site controller firmware
update.
„ SPCS310.000 SPC Pro Programming Tool
The SPCS310.000 configuration software allows the panels to be easily configured via
PC in online or offline mode. In online mode the system can also be controlled (e.g.
set/unset of areas or inhibit of zones) and event log and system status can be viewed.
The software connects via RS232, USB or IP to the SPC Controller. The RS232 and IP
connection can either be a direct or a remote connection. The SPC Fast Programmer is
also supported.
13
Automated processes reduce costs to maintain and administer a larger amount
of installed SPC panel base. The remote maintenance server periodically sends
service reports of installed SPC panels to the installer. And the SPC Safe server
provides a common repository with always up-do-date site configurations of
installed base.
„ SPCS320.000 SPC Remote Maintenance Server Software
The SPCS320.000 Remote Maintenance Server ensures a high service quality at reduced
costs.The server periodically receives automated technical system checks from the SPC
panel via PSTN, GSM or IP, without involvement of an engineer..
The data on the server can be auto-analysed and printed, an ideal support for existing or
new service contracts with customers
The SPC Pro is used as user interface for server configuration and to schedule reports or
process available data for each installation.
Support of remote maintenance service depends on type and firmware release of
connected SPC control panel.
„ SPCS410.000 SPC Safe PC-Software
The SPCS410 SPC Safe reduces administration costs of a large installed SPC panel base
and is based on a client/server architecture.
The central SPC Safe server always contains up-to-date configuration files in a central
database. Configuration changes of an installation (e.g. changed PIN) are automatically
transmitted over IP (Ethernet) to the SPC Safe server. Alternatively, the configuration
files can be easily exported from SPC Safe database to the engineers PC for offline
configuration changes, or vice versa.
The SPC Safe clients can be installed on every engineers PC and connects to the SPC Safe
database over IP. The client allows changing, import or export of configuration files,
communication setup with registered panels or tracking of configuration history per
panel.
14
„ Technical fearures
SPC6330.310-L1
INTRUSION
Programmable areas
60
Number of on-board zones
8
Max. number of hardwired zones
Supervised input
EOL resistor
512
No EOL / Single EOL / Dual EOL / Tri EOL (Antimask PIR) / Inertia Sensors
4K7 (default), other resistor combinations configurable
Number of on-board outputs
6
Max. number of outputs
512
Max. number of user codes
512
Event memory
10’000 intrusion events
Calendar based time channels
64 (53-week calendar)
Cause & Effects
1024 triggers / 512 mapping gates
Language
Multi-language support
Voice assistance
Supported
Customer Logo
Supported
FIELD BUS
Bus connections
Number of field devices1)
X-BUS (2 spurs or 1 loop)
128 (32 Keypads, 32 Door-expanders, 64 Input/Output expanders)
CONNECTIVITY
Web Server
Pluggable Communication Interfaces
Standard Communication Protocol
HTTPS (embedded)
PSTN or GSM/GPRS modem (system supports 2 optional modems simultaneously)
SIA, Contact ID, Scancom Fast Format, SMS messaging
Fast Programmer Support
Firmware Upgrade
Yes
Local / Remote upgrade for Controller and Expanders
SMS event notification / Panel control
With GSM option
Local and Remote configuration (SPC Pro
support)
Automated Remote Maintenance (SPC RM
support)
Automated Site Administration (SPC Safe
support)
IP Alarm and Event transmission
(SPC Com support)
X-10
Via RS232, USB, PSTN, GSM,
IP over Ethernet
Via PSTN, GSM,
IP over Ethernet
Via IP over Ethernet
IP over Ethernet / GPRS
Support of X-10 Power Controller and X-10 commands
ACCESS
Event memory
10’000 access events
Max. number of doors (entry / entry-exit)
64 / 32
Max. number of door groups
32
Support of readers with card and/or PIN
Supported card technologies
Yes
EM4102 / SiPass, Wiegand 26-bits, HID Corporate 1000
Pass-back prevention (soft / hard)
Yes
Custodian for door groups
Yes
Escort through doors
Yes
WIRELESS
Max. number of wireless zones 2)
120
Max. number of wireless remote controls
512
Max. number of Intrunet wireless detectors
received by any wireless receiver
(recommended)
20
1)
2)
More I/O expanders can be addressed instead of a keypad or door expander, but number of programmable inputs / outputs cannot exceed specified system limits.
A wireless zone takes away a wired zone / optional RF receivers required.
15
„ Technical data
SPC6330.310-L1
Intrusion CP, G3
Controller and PSU
Number of on-board zones
8, freely programmable
EOL resistor
Dual 4K7 (default), other resistor combinations configurable
Max. number of hardwired zones
Max. number of wireless zones
1)
Number of on-board open coll.
Number of on-board relays
SPCP332.300/333.300 SPCP432.300/433.300
Smart PSU
Smart PSU with
with I/O-Expander
2-Door Expander
8, freely
4, for door control
programmable
Dual 4K7 (default), other resistor combinations
configurable
512
120
2, for internal / external bell (max. 400 mA each)
3, freely programmable
(max. 400 mA each, supplied via auxiliary output)
1, for strobe (single-pole changeover, 30 V / max. 1 A)
2, freely
programmable
2, for door control
(single-pole changeover, 30 V DC / max. 1 A)
Max. number of outputs
512
Programmable areas
60
Max. number of user codes
512
Intrusion Event Logs
10’000 log events shared across all areas
Access Event Logs
Field bus
10’000 log events
2)
Number of field devices
3)
Tamper contact
Interfaces
X-BUS on RS-485 (307 kb/s)
128 (32 Keypads, 32 Door-expanders,
64 Input/Output expanders)
On-board front cabinet spring tamper
+ 2 auxiliary tamper inputs (back tamper with SPCY130 option)
2 X-BUS (2 spurs or 1 loop)
2 RS232 (RJ45 ports, for X-10 or external communication)
1 USB (PC for browser programming / terminal program)
1 Fast Programmer
1 Ethernet (RJ45)
Power supply
Type A (per EN50131-1), Integrated on controller PCB
Input voltage
230 V AC, +10 to -15 %, 50 Hz at transformer
X-BUS on RS-485 (307 kb/s)
Front cabinet spring tamper /
back tamper (SPCP333/433)
2 card readers,
Wiegand 26 bits
(standard),
Clock&Data and
Wiegand 36 bit
(proprietary)
Type A (per EN50131-1)
Weight
7.30 kg
Colour
RAL 9003 (signal white)
230 V AC, +10 to -15 %, 50 Hz at transformer
Max. 95 mA
(all relays activated)
Min. 77 mA
Max. 2 x 750 mA (subject to size of battery fitted
& Security Grade required)
11-14 V DC in normal conditions
(mains powered and fully charged battery) 4)
Max. 7 Ah / 12 V (SPCP332/432)
Max. 17 Ah / 12 V (SPCP333/433)
Small metal enclosure (SPCP332/432)
Hinged metal enclosure (SPCP333/433)
1.4 mm mild steel
264 x 357 x 81 (SPCP332/432)
326 x 415 x 114 (SPCP333/433)
5.20 kg (SPCP332/432)
7.40 kg (SPCP333/433)
RAL 9003 (signal white)
-10 to +50 °C
-10 to +50 °C
Max. 90 % (non-condensing)
Certified according to
EN50131-1:2006 (Grade 3, Class II Indoor General),
TS50131-3:2003, EN50131-6:2008
Max. 90 % (non-condensing)
Operating current
Controller only max. 200 mA
Quiescent current
Controller only max. 170 mA
Max. 750 mA
(subject to size of battery fitted & Security Grade required)
11-14 V DC in normal conditions
(mains powered and fully charged battery) 4)
Auxiliary power (nominal)
Output voltage
Battery capacity (Recommended
YUASA battery, not included)
Housing
Max. 17 Ah / 12 V
Hinged metal enclosure
1.4 mm mild steel
Dimensions (W x H x D in mm)
Operating temperature
Relative humidity
Standards
1)
2)
3)
4)
326 x 415 x 114
A wireless zone takes away a wired zone / optional RF receivers required.
More I/O expanders can be addressed instead of a keypad or door expander, but number of programmable inputs / outputs cannot exceed specified system limits.
Max. 400 m between devices in chain configuration / cable types IYSTY 2 x 2 x Ø 0.6 mm (min.), UTP cat5 (solid core) or Belden 9829.
When the secondary device is powering the auxiliary output, voltages as low 9.5 V can be seen on this output before the system shuts down to deep discharge protection.
16
SPCE650.100/652.100
Expander,
8 Inp./2 Outp.
SPCE450.100/452.100
Expander,
8 Relay-Outputs
SPCA210.100
2-Door
Expander
4 outputs
(void/valid for
each reader)
SPCW130.100
SiWay RFExpander
9.5 – 14 V DC
X-BUS on RS-485
(307 kb/s)
On-board front spring
tamper,
back tamper
(SPCE652)
9.5 – 14 V DC
X-BUS on RS-485
(307 kb/s)
On-board front spring
tamper,
back tamper
(SPCE452)
9.5 – 14 V DC
X-BUS on RS485 (307 kb/s)
9.5 – 14 V DC
X-BUS on RS485 (307 kb/s)
On-board front
spring tamper
-10 °C to 50 °C
-10 °C to 50 °C
Max. 90 %
(non-condensing)
Max. 90 %
(non-condensing)
RAL 9003
(signal white)
RAL 9003
(signal white)
Plastic enclosure (ABS)
Plastic enclosure (ABS)
200 x 153 x 47
(Enclosure)
150 x 82 x 20 (PCB)
200 x 153 x 47
(Enclosure)
150 x 82 x 20 (PCB)
0.35 kg
Operating current
Quiescent current
Expanders
SPCE120.100
Indication
Expander
16 tri-color
LEDs, freely
programmable
4 function keys,
freely
programmable
9.5 – 14 V DC
X-BUS on RS485 (307 kb/s)
SPCE110.100
Key Switch
Expander
2 tri-color
LEDs, freely
programmable
On-board front
spring tamper
On-board front /
back tamper
switch
On-board front /
back tamper
switch
-10 °C to 50 °C
-10 °C to 50 °C
-10 °C to 50 °C
-10 °C to 50 °C
Max. 90 %
(noncondensing)
RAL 9003
(signal white)
Plastic enclosure
(ABS)
200 x 153 x 47
(Enclosure)
150 x 82 x 20
(PCB)
0.34 kg
Max. 90 %
(noncondensing)
RAL 9003
(signal white)
Plastic enclosure
(Polycarbonate)
Max. 90 %
(noncondensing)
RAL 9003
(signal white)
Plastic enclosure
(Polycarbonate)
112 x 92 x 28
112 x 92 x 38
0.40 kg
Max. 90 %
(noncondensing)
RAL 9003
(signal white)
Plastic enclosure
(ABS)
200 x 153 x 47
(Enclosure)
150 x 82 x 20
(PCB)
0.36 kg
0.19 kg
Max. 80 mA at
12 V DC (all relays
operated)
Max. 190 mA at 12 V
DC (all relays
operated)
Max. 80 mA
at 12 V DC (all
relays operated)
Max.60 mA at
12 V DC
Min. 40 mA at
12 V DC
Min. 40 mA at
12 V DC)
Min. 45 mA at
12 V DC
Min. 60 mA at
12 V DC
0.27 kg
Max. 50 mA at
12 V DC (relay
and LEDs
operated)
Min. 30 mA at
12 V DC
LED indicators
Special keys
Operating voltage
Field bus 1)
Tamper contact
Operating
temperature
Relative humidity
Color
Housing
Dimensions
(W x H x D in mm)
Weight
Card reader
EOL resistor
Number of on-board
relays
Min. 30 mA at
12 V DC
Integrated
125 kHz reader
(EM 4102)
Integrated
SiWay RF
receiver
(868 MHz)
Radio Module
Number of on-board
zones
Max. 70 mA at
12 V DC (all
LEDs operated)
8, freely
programmable
Dual 4K7 (default),
other resistor
combinations
configurable
2, freely
programmable (singlepole changeover,
30 V DC / max. 1 A)
8, freely
programmable (singlepole changeover,
30 V DC / max. 1 A)
4, for door
release switch
(DRS) and door
position switch
(DPS), or freely
programmable
Dual 4K7
(default), other
resistor
combinations
configurable
2, for door lock
or freely
programmable
(single-pole
changeover,
30 V DC / max.
1 A)
1, freely
programmable
Dual 4K7
(default), other
resistor
combinations
configurable
Number of card
readers
1)
1, freely
programmable
(single-pole
changeover,
30 V DC /
max. 1 A)
3 key positions
(2-0-1 in 90°
steps, cylinder
type
KABA1008C)
Programmable key
input
Card reader
protocols
9.5 – 14 V DC
X-BUS on RS485 (307 kb/s)
2
Wiegand 26 bits
(standard),
Clock&Data and
Wiegand 36-bit
(proprietary)
Max. 400 m between devices in chain configuration / cable types IYSTY 2 x 2 x Ø 0.6 mm (min.), UTP cat5 (solid core) or Belden 9829.
17
Keypads
LED indicators
Special keys
Operating voltage
Field bus 1)
Tamper contact
Operating temperature
Relative humidity
Color
Housing
Dimensions
(W x H x D in mm)
Weight
SPCK620.100
Comfort Keypad
SPCK623.100
Comfort Keypad w.
Audio/Card Reader
3 status LEDs
2 soft keys,
1 multi-dimensional
navigation key
9.5 – 14 V DC
X-BUS on RS-485
(307 kb/s)
On-board front /
back spring tamper
-10 °C to 50 °C
Max. 90 %
(non-condensing)
RAL 9003
(signal white)
Plastic enclosure
(ABS)
SPCK422.100
LCD-Keypad,
2x16 Characters,
SiWay RF
3 status LEDs
2 soft keys,
1 multi-dimensional
navigation key
9.5 – 14 V DC
X-BUS on RS-485
(307 kb/s)
On-board front /
back spring tamper
-10 °C to 50 °C
Max. 90 %
(non-condensing)
RAL 9003
(signal white)
Plastic enclosure
(ABS)
5 status LEDs
4 soft keys,
1 multi-dimensional
navigation key
9.5 – 14 V DC
X-BUS on RS-485
(307 kb/s)
On-board front /
back tamper switch
-10 °C to 50 °C
Max. 90 %
(non-condensing)
RAL 9003
(signal white)
Plastic enclosure
(Polycarbonate)
5 status LEDs
4 soft keys,
1 multi-dimensional
navigation key
9.5 – 14 V DC
X-BUS on RS-485
(307 kb/s)
On-board front /
back tamper switch
-10 °C to 50 °C
Max. 90 %
(non-condensing)
RAL 9003
(signal white)
Plastic enclosure
(Polycarbonate)
148 x 85 x 33
148 x 85 x 33
148 x 85 x 33
112 x 185 x 28
112 x 185 x 28
0.21 kg
0.21 kg
Max. 110 mA at
12 V DC
(backlight, LEDs,
sounder, reader
operated)
Min. 80 mA at
12 V DC
Integrated 125 kHz
reader (EM 4102)
0.21 kg
0.38 kg
Max. 95 mA at
12 V DC
(backlight, LEDs,
sounder operated
Max. 155 mA at
12 V DC (backlight,
LEDs, sounder
operated)
Min. 50 mA at
12 V DC
Min. 55 mA at
12 V DC
0.38 kg
Max. 230 mA at
12 V DC (backlight,
LEDs, voice
annunciation
operated)
Min. 110 mA at
12 V DC
Integrated 125 kHz
reader (EM 4102)
SPCK420.100
LCD-Keypad,
2x16 Characters
SPCK421.100
LCD-Keypad, 2x16
Char, Card Reader
3 status LEDs
2 soft keys,
1 multi-dimensional
navigation key
9.5 – 14 V DC
X-BUS on RS-485
(307 kb/s)
On-board front /
back spring tamper
-10 °C to 50 °C
Max. 90 %
(non-condensing)
RAL 9003
(signal white)
Plastic enclosure
(ABS)
Operating current
Max. 90 mA at
12 V DC
(backlight, LEDs,
sounder operated)
Quiescent current
Min. 45 mA at
12 V DC
Card reader
Integrated SiWay RF
receiver (868 MHz)
Radio Module
Voice annunciation
support
Audio
1)
Max. 400 m between devices in chain configuration / cable types IYSTY 2 x 2 x Ø 0.6 mm (min.), UTP cat5 (solid core) or Belden 9829.
Controller Plug on
Modules
Network connection
PSTN (analogue telephone network)
Operating current
Quiescent current
Operating temperature
Relative humidity
Max.35 mA (communication active)
Min. 25 mA
-10 °C to 50 °C
Max. 90 % (non-condensing)
SPCN310.000
GSM Module incl. Antenna
GSM / GPRS (dual band 900/1800
MHz)
Max.130 mA
Min. 130 mA
-10 °C to 50 °C
Max. 90 % (non-condensing)
Plug on module to SPC controller
Plug on module to SPC controller
90 x 38 x 25 (PCB)
90 x 38 x 25 (PCB)
55 x 22 x 20 (PCB)
0.03 kg
0.03 kg
0.05 kg
SiWay RF receiver (868 MHz)
Mounting
Dimensions
(W x H x D in mm)
Weight
Radio Module
SPCN110.000
PSTN Module, V90
18
SPCW110.000
SiWay RF-Kit for Panel
Max.10 mA
Min. 10 mA
-10 °C to 50 °C
Max. 90 % (non-condensing)
Plug on module to SPC controller,
antenna mounted on metal cabinet
Engineering and
Maintenance Tools
Interfaces
SPCX410.000
SPC Fast Programmer
1 x USB (to PC), 1 x 10-pin
connector (to SPC controller)
Communication protocol
System compatibility
Memory
1)
SPCS320.000
Remote Maintenance Server
SPCS410.000
SPC Safe
Proprietary (via RS232, USB,
TCP/IP on Ethernet, PSTN,
GSM, Data transfer from/to
SPC Fast Programmer)
Proprietary (via TCP/IP on
Ethernet, PSTN, GSM)
Proprietary (via TCP/IP on
Ethernet)
Single PC solution,
PC: Windows 2000, XP, Vista
Running on PC with XP/Vista,
SPC controller:
Support of
SPC4000/SPC5000/SPC6000
SPC4000/SPC5000/SPC600
1 MB
Database
Housing
SPCS310.000
SPC Pro Programming Tool
Single PC Solution1),
Running on PC with XP/Vista,
Supports
SPC42xx/SPC43xx/SPC52xx/
SPC53xx/SPC63xx
Min. 512 MB required
Min. 1 GB required
Local file storage in
compressed format.
Microsoft Access 2000,
Max. 250 site configurations
Client/Server Solution1),
Running on PC with XP/Vista,
Fully supports
SPC43xx/SPC53xx/SPC63xx
(communication via TCP/IP
on Ethernet)
Partially supports
SPC41xx/SPC52xx
Min. 1 GB required
SQL Server 2005 Express
Edition,
Max. 250 site configurations
(more on request)
Plastic enclosure (ABS)
It’s not recommended to use SPCS410 and SPCS320 in the same environment. Depending on setup and use case the site configuration files in SPCS320.000 Remote
Maintenance Server may be overwritten with configuration files of SPCS410.000.
19
„ Details for ordering
Type
Item No.
Designation
Dimensions
(W x H x D in mm)
Weight
SPC6330.310-L1
S54541-C105-B100
SPC6330.310-L1 Intrusion CP, G3
326 x 415 x 114
7.30 kg
SPCP332.300
S54545-C102-A100
SPCP332.300 Smart PSU (7 Ah) with I/O-Expander
264 x 357 x 81
5.20 kg
SPCP333.300
S54545-C101-A100
SPCP333.300 Smart PSU (17 Ah) with I/O-Expander
326 x 415 x 114
7.40 kg
SPCP432.300
S54545-C103-A100
SPCP432.300 Smart PSU (7 Ah) with 2-Door Expander
264 x 357 x 81
5.20 kg
SPCP433.300
S54545-C104-A100
SPCP433.300 Smart PSU (17 Ah) with 2-Door Expander
326 x 415 x 114
7.40 kg
SPCK420.100
S54543-F101-A100
SPCK420.100 LCD-Keyp., 2x16 Char.
148 x 85 x 33
0.21 kg
SPCK421.100
S54543-F102-A100
SPCK421.100 LCD-Keyp., 2x16 Char., Card Reader
148 x 85 x 33
0.21 kg
SPCK422.100
S54543-F103-A100
SPCK422.100 LCD-Keyp., 2x16 Char., Card Reader, SiWay RF 148 x 85 x 33
0.21 kg
SPCK620.100
S54543-F110-A100
SPCK620.100 Comfort Keypad
112 x 185 x 28
0.38 kg
SPCK623.100
S54543-F111-A100
SPCK623.100 Comfort Keypad w. Audio/Card Reader
112 x 185 x 28
0.38 kg
SPCE110.100
S54542-F104-A100
SPCE110.100 Key Switch Expander
112 x 92 x 38
0.27 kg
SPCE120.100
S54542-F105-A100
SPCE120.100 Indication Expander with Card Reader
112 x 92 x 28
0.19 kg
200 x153 x 47 (Enclosure)
150 x 82 x 20 (PCB)
200 x153 x 47 (Enclosure)
150 x 82 x 20 (PCB)
200 x153 x 47 (Enclosure)
150 x 82 x 20 (PCB)
200 x153 x 47 (Enclosure)
150 x 82 x 20 (PCB)
200 x153 x 47 (Enclosure)
150 x 82 x 20 (PCB)
200 x153 x 47 (Enclosure)
150 x 82 x 20 (PCB)
SPCE650.100
S54542-F101-A100
SPCE650.100 Expander, 8 Inp./2 Outp.
0.35 kg
SPCE652.100
S54542-F106-A100
SPCE652.100 Expander, 8 Inp./2 Outputs, back tamper
SPCE450.100
S54542-F103-A100
SPCE450.100 Expander, 8 Relay-Outputs
SPCE452.100
S54542-F107-A100
SPCE452.100 Expander, 8 Relay-Outputs, back tamper
SPCA210.100
S54547-A101-A100
SPCA210.100 2-Door Expander
SPCW130.100
S54554-F101-A100
SPCW130.100 SiWay RF-Expander
SPCW110.000
S54554-B101-A100
SPCW110.000 SiWay RF -Kit for Panel
50 x 22 x 20 (PCB)
0.05 kg
0.35 kg
0.40 kg
0.40 kg
0.36 kg
0.34 kg
SPCN110.000
S54550-B101-A100
SPCN110.000 PSTN Module, V90
90 x 38 x 25
(PCB)
0.03 kg
SPCN310.000
S54550-B102-A100
SPCN310.000 GSM Module incl. Antenna
90 x 38 x 25
(PCB)
0.03 kg
SPCW101.000
S54559-B101-A100
SPCW101.000 External Aerial Kit
200 (L)
0.09 kg
SPCX410.000
S54559-B102-A100
SPCX410.000 SPC Fast Programmer
91 x 32 x 17
0.04 kg
SPCS310.000
Supplied with panel
SPCS310.000 SPC Pro Programming Tool
n. a.
n. a.
SPCS320.000
S54549-F102-A100
SPCS320.000 SPC Remote Maintenance Server SW
n. a.
n. a.
SPCS410.000
S54549-F101-A100
SPCS410.000 SPC Safe PC-Software
n. a.
n. a.
IB42-EM
S24246-D4901-A1
EM laminated card without print
86 x 54 x 1
0.01 kg
IB44-EM
S24246-D4902-A1
Key tag
36 x 30 x 7
0.01 kg
SPCY130.000
S54559-B116-A100
SPCY130.000 Backtamper kit G3 cabinet
n. a.
0.06 kg
The information in this document contains general descriptions of technical options available,
which do not always have to be present in individual cases. The required features should therefore
be specified in each individual case at the time of closing the contract.
© Siemens AG • Document no. A6V10271202 • Edition: 11.06.2010 • Document version: 1.3
Siemens AG
Siemensallee 84
D-76187 Karlsruhe
Tel. +49 721 595 1
www.buildingtechnologies.siemens.com
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement