Digitus DA-70455 USB 3.0 to VGA Graphic Adapter Quick Start Guide

Quick Installation Guide
DA-70455
DONGLE SERIES
USB 3.0 TO VGA
ADAPTER
Please kindly reboot your computer
Afterwards, this USB 3.0 to VGA
Adapter is Plug and Play.
Double click it to start the
installation till it’s finished.
 Step 2: Click it and you will see a
file called
 Step 1: Plug USB 3.0 to VGA
adapter to your computer and
you will see the following on
your computer:
How to install USB 3.0 to
VGA?
USB 3.0  up to 1080p
▲ VGA Resolution:
Connected to USB 3.0 port only
*CPU: Intel core i3 / AMD Bulldozer, Bobcat
or above
▲ Hardware Requirement:
Now, VGA Adapter is able to be use.
 Step 2: Connect the USB port of
this VGA Adapter to your
computer. (Notebook or Tablets)
 Step 1: Connect a VGA cable to
a Monitor ( TV or Projector) and
this adapter.
How to connect a VGA
Adapter?

Choose “ Screen resolution”.
You can adjust the function
which you wish to use.
 Adjust functions: Put your mouse
cursor on the desktop of your
computer and click right button
on your mouse. The following
will be shown on the display.
How to use a VGA Adapter?
 Multiple displays:
1. Duplicate these displays
2. Extend these displays 
Extend your desktop across
multiple displays.
3. Show desktop only on 1
4. Show desktop only on 2
4.
1.
2.
3.
 Display
 Resolution
 Orientation:
Landscape  Normal Status
Portrait  Right vertical
Landscape (Flipped) 
Upside down
Portrait (Flipped) 
Left vertical
Functions:
2. No Display:
If there is no display to a connected
monitor / projector / TV, you could
adjust your computer’s monitor to a
suitable resolution of a connected
monitor.
*Notice of VGA
1. Flicker:
You might see flickers on your
monitor. Do not worry about it! This
is because of the bandwidth issue.
You could adjust your computer’s
monitor to a suitable resolution and
make the flickers disappeared.