CH-1106TX & RX - CIE
CH-1106TX & RX
HDMI v1.3 to CAT6
Transmitter & Receiver
with IR return control
Operation Manual
CH-1106TX & RX
Disclaimers
The information in this manual has been carefully checked and
is believed to be accurate. Cypress Technology assumes no
responsibility for any infringements of patents or other rights of third
parties which may result from its use.
Cypress Technology assumes no responsibility for any inaccuracies
that may be contained in this document. Cypress also makes
no commitment to update or to keep current the information
contained in this document.
Cypress Technology reserves the right to make improvements to this
document and/or product at any time and without notice.
Copyright Notice
No part of this document may be reproduced, transmitted,
transcribed, stored in a retrieval system, or any of its part translated
into any language or computer file, in any form or by any means
- electronic, mechanical, magnetic, optical, chemical, manual,
or otherwise - without express written permission and consent from
Cypress Technology.
© Copyright 2009 by Cypress Technology.
All Rights Reserved.
Version 1.0 October 2009
Trademark Acknowledgments
All products or service names mentioned in this document may be
trademarks of the companies with which they are associated.
Safety Precautions
Please read all instructions before attempting to unpack or install or
operate this equipment, and before connecting the power supply.
Please keep the following in mind as you unpack and install this
equipment:







Always follow basic safety precautions to reduce the risk of
fire, electrical shock and injury to persons.
To prevent fire or shock hazard, do not expose the unit to rain,
moisture or install this product near water.
Never spill liquid of any kind on or into this product.
Never push an object of any kind into this product through
module openings or empty slots, as you may damage parts.
Do not attach the power supply cabling to building surfaces.
Do not allow anything to rest on the power cabling or allow it to
be abused by persons walking on it.
To protect the equipment from overheating, do not block the
slots and openings in the module housing that provide
ventilation.
Revision History
Version No
V1
Date
20091020
Summary of Change
Preliminary Release
Table of Contents
1.
Introduction ……………………..……………………...…........….…….
1
2.
Applications …………………..………………….……...................…..
1
3.
Package Contents ………………………...........……….................…
1
4.
System Requirements ……………..……….........………............…….
1
5.
Features …………………………………………......……........…...……
2
6.
Specifications ………………………………...……..........………....….
3
7.
Operation Controls and Functions ……………...……..............……
7.1 Front Panel ..............................................................................
4
7.2
Rear Panel .…………………………………..…….......…...….…
5
Pin Assignment .............................……………..........…......…....…...
6
8.1
IR Cable Pin Assignment .......................................................
6
8.2
RJ-45 Pin Definitions ................................................................
6
10.
Connection and Installation ….………………….........…..…..…......
7
11.
Acronyms …......................................................................................
9
8.
4
1. Introduction
The HDMI 1.3 transmitter and receiver over CAT6 is an extension tool for your
long distance HDMI display needs. Instead of using expensive HDMI cables,
your existing CAT6 cables/sockets can replace HDMI cables while performing
the same functions like transfer Deep Color (12 bits/color) video and new
lossless compressed (Dolby TrueHD, Dolby Digital Plus and DTS-HD Master
Audio) Digital audio, at a bandwidth of up to 225MHz. Moreover, user can
use the existing remote control to control the source and cascade with multi
sets of this device to reach a extrem of the distance. This HDMI 1.3 Transmitter
and receiver is your ideal choice when looking for a HDMI extender.
2. Applications
 Showroom display & control
 Window display & control
 Home or individual display & control
 Hyper market display & control
 Lecture room display & control
3. Package Contents
 HDMI 1.3 Transmitter x 1
 HDMI 1.3 Receiver x 1
 IR Eye Receiver cable x 1
 IR Eye Blaster cable x 1
 5V DC power supply adaptor x 2
 Operation Manual x 1
4. System Requirements
HDMI input source equipment, output HDMI displayer, two CAT6 cables and
source equipment’s remote control.
1
5. Features
 Compliant with HDMI 1.3, HDCP 1.1 and DVI1.1 standards
 Supports digital video formats in Deep Color Mode at up to 36 bits (12bits/








color) and new lossless compressed (Dolby TrueHD, Dolby Digital Plus
and DTS-HD Master Audio) Digital audio
Supports CAT-6 cables for data/DDC transmission
Supports equalize and recover incoming TMDS data before
re-transmitting them with optimal quality regardless of the incoming
signal quality
Supports high definition resolution, the HDMI cable distance test with
1080p/8bits & 12bits resolution the Input/Output can reach up to
15/15 meters. With CAT6 cable, distance test with 1080p/8bits & 12bits
resolution the Input/Output source can run up to 45/20 meters
Note:
A. Cable tested with CAT-6E / 23AWG / Solid and therefore, cable with
different specification may result in different distance.
B. Cable distance tested with equipment PS3 40G, 37" Philips 8 bit LCD
TV and 37" SamSung 12 bit LCD TV.
C. Figures provided in this manual are reference figures only, actual
figures may depend on source and display use with cable
specification.
Supports CEC bypass
Supports xvYCC
Supports IR Receiver and IR Blaster
Supports full range of IR frequency from 20~60KHz
Supports multi cascade for extending the signal distance to extreme
2
6. Specifications
Transmitter
1 x HDMI
1 x IR Blaster
1 x CAT-6 Output Video
1 x CAT-6 Output DDC
Receiver
1 x HDMI
1 x Receiver
1 x CAT-6 Input for Video,
1 x CAT-6 Input for DDC
HDMI Input Cable
1080p 8-bit (15M), 12-bit (15M)
HDMI Output Cable
1080p 8-bit (15M), 12-bit (15M)
CAT6 Cable
1080p 8-bit (45M), 12-bit (20M)
Power Supply
5V/1A (US/EU standards, CE/FCC/UL certified)
(US/EU standards, CE/FCC/UL certified)
ESD Protection
Human body model: ± 8kV (air-gap discharge)
± 4kV (contact discharge)
Dimensions (mm)
78.5(W) x 117(D) x 30(H) / Transmitter
78.5(W) x 72(D) x 30(H) / Receiver
Weight(g)
200 / Transmitter
90 / Receiver
Chassis Material
Aluminum
Silkscreen Color
Silver
Operating Temperature
0˚C ~ 40˚C / 32˚F ~ 104˚F
Storage Temperature
-20˚C ~ 60˚C / -4˚F ~ 140˚F
Power Consumption
3.6W/TX, 3.6W/RX
Relative Humidity
20 ~ 90% RH (non-condensing)
3
7. Operation Controls and Functions
7.1 Front Panel
CH-1106TX
CH-1106RX
POWER 5V
IR
POWER 5V
HDMI INPUT
Receiver
Transmitter
①
IR
HDMI OUTPUT
②
③
④
⑤
① IR Transmitter: This slot is where you connect the IR blaster cable and
place the IR eye in front of the source equipment(s) for sending the IR
signal to the source equipment(s), The IR blaster accepts the frequency
range from 20KHz to 60KHz.
② HDMI INPUT: This slot is where you connect to the HDMI or DVI output port
of your source equipments such as DVD player or set-top-box with HDMI
cable or cascade from the receiver unit or splitter of the same family
device for extending signal distance.
Example:
CLUX-22HC
HDMI
Cable
or
CAT6
VIDEO
HDMI
HDMI
CH-1106RX
HDMI
DVD
Player
CAT6
VIDEO
HDMI
CH-1106TX
HDMI
Cable
DDC
CAT6
HDMI
HDMI
HDMI
Cable
CLUX-1H4CAT
DDC
CAT6
CLUX-1H8CAT
HDMI LCD TV
CAT6
VIDEO
CH-1106RX
HDMI
Cable
DDC
CAT6
HDMI
HDMI
CH-1106TX
HDMI LCD TV
③ Power: This slot is where you plug the 5V DC power supply into the unit
and connect the adaptor to an AC wall outlet.
④ HDMI OUTPUT: This slot is where you connect the HDMI or DVI input port of
your displayer such as HD TV or HD monitor or cascade to another
transmitter unit or splitter of the same family device to extend signal
distance.
4
Example:
CH-1106TX
CH-1106RX
HDMI
Cable
HDMI
HDMI
CAT6
VIDEO
HDMI
HDMI
HDMI
Cable
DDC
CAT6
DVD
Player
CAT6
VIDEO
CH-1106RX
HDMI
Cable
HDMI
HDMI
CH-1106TX
DDC
CAT6
HDMI LCD TV
⑤ IR Receiver: This slot is where you connect the IR receiver cable and
place the IR eye in front of the display then use the existing remote
controls to control input source equipment(s). The IR receiver accepts the
frequency range from 20KHz to 60KHz.
7.2 Rear Panel
CH-1106TX
DDC
①
CAT6 OUTPUT
CH-1106RX
VIDEO
VIDEO
②
②
CAT6 INPUT
DDC
①
① DDC input/output: Connect the DDC output of transmitter to the DDC
input of the receiver unit using CAT-6 cable.
② Video input/output: Connect the video output of transmitter to the video
input of the receiver unit using CAT-6 cable.
5
8. Pin Assignment
8.1 IR Cable Pin Assignment
IR Blaster
IR Receiver
① Power 5V
② NC
③ IR blaster signal
① IR signal
② Power 5V
③ Grounding
① ②③
① ②③
8.2 RJ-45 Pin Definition
Pin
Video
DDC
1
TMDS2+
SCL
2
TMDS2-
N/A
3
TMDS1+
SDA
4
TMDS1-
Power 5V
5
TMDS0+
GND
6
TMDS0-
IR
7
TMDSC+
HPD
8
TMDSC-
CEC
6
DVD
7
DDC
AorBorC
CAT6
OUTPUT
IR Blaster
DVD
IR Blaster
IN
IR Receiver
HDMI
HDMI
Cable
HDMI
HD TV
VIDEO
DDC
x3
CAT6 OUTPUT
AorBorC
OUT
CLUX-1H4CAT
CLUX-1H8CAT
HDMI
DVD
HDMI
Cable
DDC
AorBorC
CAT6
OUTPUT
HDMI
VIDEO
HD TV
CAT6 IN
CH-106TX
CH-1106TX
CLUX-1H4CAT
CLUX-1H8CAT
CMLUX-4H4CAT
CLUX-22HC
CLUX-22HC
HDMI IN
HDMI
HDMI
HDMI IN
HDMI
CH-106TX
CH-1106TX
VIDEO
10. Connection and Installation
7M
VIDEO
3M
DDC
30°
HDMI
30°
HDMI
3M
HDMI
HDMI
30°
3M
7M
IR Receiver
HD TV
30°
3M
HDMI
HDMI
Cable
VIDEO
AorBorC
CAT6
OUTPUT
DDC
HDMI
Cable
B
HDMI
3M
30°
HD TV
30°
3M
7M
IR Receiver
CLUX-1CAT4H / CLUX-1CAT8H
VIDEO
AorBorC
CAT6
OUTPUT
HDMI
HD TV
HDMI
Cable
C
CLUX-22HC
DDC
A
HDMI
CH-106RX / CH-1106RX
HDMI
8
A
Acronyms
Acronym
Complete Term
CAT6
Catergory 6 cable
DVI
Digital Visual Interface
ESD
Electrostatic Discharge
GND
Ground
HDCP
High-Bandwidth Digital Content Protection
HDMI
High-Definition Multimedia Interface
IR
Infrared
9
10
CYPRESS TECHNOLOGY CO., LTD.
Home page: http://www.cypress.com.tw
20091105 MPM-CH1106TXRX
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement