Zipato RGBWE27ZW.US RGBW Light Bulb Quick Installation Guide ()

HOW TO INSTALL
STEP 1
RGBW LIGHT BULB SPEAKS
RGBW
LIGHT BULB
Screw the RGBW bulb in
standard E27 socket
QUICK INSTALLATION GUIDE
v1.0
AVAILABLE FOR
TRADEMARKS
STEP 2
Zipato and the Zipato logo are registered Trademarks. All other
product names mentioned herein may be trademarks or registered
trademarks of their respective companies.
IMPORTANT NOTICE
Although Zipato has attempted to ensure the accuracy of the content
of this manual, it is possible that this document may contain technical
inaccuracies, typographical, or other errors. Zipato assumes no
liability for any error in this publication, and for damages, whether
direct, indirect, incidental, and consequential or otherwise, that may
result from such error, including, but not limited to loss of data or
profit. Zipato provides this publication “as is” without warranty of
any kind, either express or implied, including, but not limited to
implied warranties of merchantability for a particular purpose. The
published information in the manual is subject to change without
notice. Zipato reserves the right to make changes in the product
design, layout, and driver revisions without notify cation to its
users. This version of the Installation guide supersedes all previous
versions.
6.7W 60W
24/7
ELECTROMAGNETIC COMPATIBILITY
WIRELESS LIGHTING
BULB
TAKE CARE OF YOUR SAFETY
Display extreme caution when using ladders or steps, please follow
manufacturer’s instructions. Be careful when using hand and power
tools and follow the manufacturer’s guidelines when using them.
Take care that the correct tools are used. Wear goggles or protective
clothing where required.
STEP 4
CONNECT WHENEVER YOU LIKE VIA
DANGER
RISK OF ELECTROCUTION
All work on the device should only be carried out by trained
and skilled electricians. Observe the country-specific regulations.
COMPUTER
SMARTPHONE
TABLET
CAUTION
DANGER
RISK OF FATAL INJURY FROM ELECTRIC CURRENT.
The device has no basic insulation and must therefore be installed in
a way that protects against accidental contact.
DANGER
RISK OF FATAL INJURY FROM ELECTRIC CURRENT.
When installing a wall plate, the distance between the cover’s
fixing brackets or screws and the connections of the flush mounted MicroModule Switch Single must be at least 4 mm once
installed. If the distance is less than 4 mm, a deeper installation
box must be used. The fixing brackets or screws of the cover must
not press against the housing. Only insulated tools may be used for
operation on the device, e.g. an insulated phase tester.
make your home smart
STEP 3
Activate inclusion mode on
your Z-wave controller
SMART HOME
SERVERS
In proper state and when operated properly, the product
complies with all the requirements in respect of interference
radiation according to EN 301 489-17, EN 301 489-1 and EN 300
328. The connections conducting HF signals must neither be
manipulated nor damaged.
The connected devices and the fl ush-mounted receiver can become
damaged if devices are operated that do not correspond to the
technical specifi cations (see technical data).
Turn ON
your wall switch
ZIPATO RGBW LIGHT BULB IS HIGHLY ENERGY EFFICIENT
INTRODUCTION
SPECIFICATION
THANK YOU
FOR BUYING ZIPATO RGBW LIGHT BULB.
This one will bring more fun in your home environment.
Zipato RGBW BULB has 5 color channels available for you to adjust:
RED, GREEN, BLUE, WARM WHITE and COLD WHITE. Zipato RGBW
BULB can be used to add color to your home or just to lighten it up in
any white color tone you desire. By using Zipabox home controller,
you can control the bulb from anywhere in the world, by using any
smartphone (iOS or Android). Also, you can automatically set colors
of your RGBW BULB to indicate certain events using the Zipato rule
creator. The Zipato RGBW bulb in combination with our Zipabox
home controller grants you unlimited possibilities.
www.zipato.com
PHYSICAL
POWER SUPPLY INPUT
STANDBY POWER
WIRELESS FREQUENCY
E27 standard
100-240VAC, 50/60Hz
0.45W
rgbwe27zw.eu - 868.42 MHz (EU)
rgbwe27zw.us - 908.42MHz (US)
rgbwe27zw.ru - 869.02MHz (RU)
rgbwe27zw.is - 916.02MHz (IS)
rgbwe27zw.au - 921.42MHz (AU)
rgbwe27zw.in - 865.20MHz (IN)
WIRELESS COMMUNICATION PROTOCOL
Z-wave REGULATORY COMPLIANCE (PENDING)
make your home smart
Activate inclusion mode
of the RGBW bulb by
GENTLY TAPPING the bulb
TEMPERATURE RANGE
OPERATING
STORAGE
HUMIDITY
0°C TO 40°C (32°F TO 104°F)
-25°C TO 70°C (-13°F TO 158°F)
5% TO 95% NON-CONDENSING
TECHNICAL SUPPORT
Having trouble installing your new product?
Zipato’s website contains the latest user documentation and
software updates for Zipato products and services.
www.zipato.com
CALL SUPPORT
CONTACT LINE
+385 (0)1 4004 404
(Mon-Fri) 9.00am-05.00pm (CET)
www.zipato.com
LIMITED PRODUCT WARRANTY
GENERAL TERMS
RGBW
LIGHT BULB
QUICK INSTALLATION GUIDE
v1.0
Z-WAVE SPECIFIC
This product can be included and operated in any Z-Wave network with
other Z-Wave certified devices from other manufacturers and/or other
applications. All non-battery operated nodes within the network will act
as repeaters regardless of vendor to increase reliability of the network .
DEVICE SPECIFICATION:
DEVICE TYPE
ROLE TYPE
LIGHT DIMMER SWITCH
ALWAYS ON SLAVE
SUPPORTED COMMAND CLASSES
Z-WAVE+ INFO
VERSION
MANUFACTURER SPECIFIC
DEVICE RESET LOCALLY
ASSOCIATION
ASSOCIATION GROUP INFO
POWER LEVEL
FIRMWARE UPDATE MD
COLOR CONTROL
SWITCH MULTILEVEL
CONFIGURATION
DOCUMENTATION FOR ASSOCIATION
COMMAND CLASS:
his association group is only used for Z-Wave plus Lifeline
T
communications.
NUMBER OF ASSOCIATION GROUPS
-1
MAXIMUM SUPPORTED NODES FOR
ASSOCIATION GROUP1
DOCUMENTATION FOR CONFIGURATION
COMMAND CLASS:
onfiguration option 1 is used to adjust color temperature. Values
C
range from 1 to 100 where 1 means full cold white and 100 means
full warm white.
CONFIGURATION NUMBER
-1
SIZE
-1
VALID VALUES RANGE
- 1:100
DEFAULT VALUE
- 50
onfiguration option 2 is used to adjust shock sensor sensitivity.
C
Values range from 0 to 31 where 0 means minimum sensitivity and
31 means maximum sensitivity.
CONFIGURATION NUMBER
2
SIZE
1
VALID VALUES RANGE
0-31
DEFAULT VALUE
16
FACTORY RESET PROCEDURE
A factory default reset is performed when the bulb is excluded
from the Z-wave network.
HOW TO ACTIVATE INCLUSION OR EXCLUSION MODE
Inclusion and exclusion modes are activated by gently tapping the
light bulb. The light bulb will shine green to indicate a successful
activation of inclusion or exclusion mode.
make your home smart
Nothing in this Limited Product Warranty affects your statutory
rights as a consumer.
The Limited Product Warranty set forth below is given by Tri plus
grupa d.o.o. (Europe) (herein referred to as “ZIPATO”). This Limited
Product Warranty is only effective upon presentation of the proof
of purchase. Upon further request by ZIPATO, this warranty card
has to be presented, too.
EXCEPT AS EXPRESSLY SET FORTH IN THIS LIMITED WARRANTY,
ZIPATO MAKES NO OTHER WARRANTIES, EXPRESS OR IMPLIED,
INCLUDING ANY IMPLIED WARRANTIES OF MERCHANTABILITY
AND FITNESS FOR A PARTICULAR PURPOSE. ZIPATO EXPRESSLY
DISCLAIMS ALL WARRANTIES NOT STATED IN THIS LIMITED
WARRANTY. ANY IMPLIED WARRANTIES THAT MAY BE IMPOSED
BY LAW ARE LIMITED IN DURATION TO THE LIMITED WARRANTY
PERIOD. TO THE EXTENT ALLOWED BY LOCAL LAW, THE
REMEDIES IN THIS WARRANTY STATEMENT ARE CUSTOMER’S
SOLE AND EXCLUSIVE REMEDIES AGAINST ZIPATO. THEY DO
NOT, HOWEVER, AFFECT OR RESTRICT THE RIGHTS YOU HAVE
AGAINST THE BUSINESS YOU BOUGHT A ZIPATO PRODUCT FROM.
IN NO EVENT WILL ZIPATO BE LIABLE FOR LOSS OF DATA OR FOR
INDIRECT, SPECIAL, INCIDENTAL, CONSEQUENTIAL (INCLUDING
LOST PROFIT OR DATA), OR OTHER DAMAGE, WHETHER BASED IN
CONTRACT, TORT, OR OTHERWISE. HOWEVER, NOTHING IN THIS
AGREEMENT LIMITS ZIPATO’S LIABILITY TO YOU (I) IN THE EVENT
OF DEATH OR PERSONAL INJURY TO THE EXTENT RESULTING
FROM ZIPATO’S NEGLIGENCE, OR (II) TO THE EXTENT RESULTING
FROM ANY FRAUDULENT MISREPRESENTATION ON THE PART
OF ZIPATO, OR (III) TO THE EXTENT ARISING UNDER PART 1
OF THE CONSUMER PROTECTION ACT 1987 OF THE UNITED
KINGDOM. SOME STATES OR COUNTRIES DO NOT ALLOW: (1) A
DISCLAIMER OF IMPLIED WARRANTIES; (2) A LIMITATION ON HOW
LONG AN IMPLIED WARRANTY LASTS OR THE EXCLUSION; OR
(3) LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES
FOR CONSUMER PRODUCTS. IN SUCH STATES OR COUNTRIES,
SOME EXCLUSIONS OR LIMITATIONS OF THIS LIMITED WARRANTY
MAY NOT APPLY TO YOU. THIS LIMITED WARRANTY GIVES YOU
SPECIFIC LEGAL RIGHTS. YOU MAY ALSO HAVE OTHER RIGHTS
THAT MAY VARY FROM STATE TO STATE OR FROM COUNTRY TO
COUNTRY. YOU ARE ADVISED TO CONSULT APPLICABLE STATE OR
COUNTRY LAWS FOR A FULL DETERMINATION OF YOUR RIGHTS.
This Limited Product Warranty applies to ZIPATO branded hardware
products (collectively referred to as “ZIPATO Hardware Products”)
sold by ZIPATO (Europe), its European subsidiaries, affiliates,
authorized resellers, or country distributors (collectively referred
to as “ZIPATO Resellers”) with this Limited Product Warranty.
The term “ZIPATO Hardware Product” is limited to the hardware
components and all its internal components including firmware. The
term “ZIPATO Hardware Product” DOES NOT include any software
applications or programs.
EOGRAPHICAL SCOPE OF THE LIMITED
G
PRODUCT WARRANTY
This Limited Product Warranty is applicable to Hardware Products
sold by Zipato Resellers in all countries listed at the beginning of
this document under the heading “Countries in which this ZIPATO
Limited Product Warranty applies”.
The Limited Product Warranty will be honored in any country where
ZIPATO or its authorized service providers offer warranty service
subject to the terms and conditions set forth in this Limited Product
Warranty. However, warranty service availability and response
times may vary from country to country and may also be subject to
registration requirements.
LIMITATION OF PRODUCT WARRANTY
ZIPATO warrants that the products described below under
normal use are free from material defects in materials and
workmanship during the Limited Product Warranty Period set
www.zipato.com
forth below (“Limited Product Warranty Period”), if the product is
used and serviced in accordance with the user manual and other
documentation provided to the purchaser at the time of purchase
(or as amended from time to time).
ZIPATO does not warrant that the products will operate
uninterrupted or error-free or that all deficiencies, errors, defects
or non-conformities will be corrected.
This warranty shall not apply to problems resulting from: (a)
unauthorized alterations or attachments; (b) negligence, abuse
or misuse, including failure to operate the product in accordance
with specifications or interface requirements; (c) improper
handling; (d) failure of goods or services not obtained from ZIPATO
or not subject to a then-effective ZIPATO warranty or maintenance
agreement; (e) improper use or storage; or (f) fire, water, acts of
God or other catastrophic events. This warranty shall also not
apply to any particular product if any ZIPATO serial number has
been removed or defaced in any way.
ZIPATO IS NOT RESPONSIBLE FOR DAMAGE THAT OCCURS AS A
RESULT OF YOUR FAILURE TO FOLLOW THE INSTRUCTIONS FOR
THE ZIPATO HARDWARE PRODUCT.
LIMITED PRODUCT WARRANTY PERIOD
The Limited Product Warranty Period starts on the date of
purchase from ZIPATO. Your dated sales or delivery receipt,
showing the date of purchase of the product, is your proof of the
purchase date. You may be required to provide proof of purchase
as a condition of receiving warranty service. You are entitled to
warranty service according to the terms and conditions of this
document if a repair to your ZIPATO branded hardware is required
within the Limited Product Warranty Period.
[Other than in respect of products for domestic use (in particular
those listed in the first and last boxes in the table below), this
Limited Product Warranty extends only to the original end user
purchaser of this ZIPATO Hardware Product and is not transferable
to anyone who obtains ownership of the ZIPATO Hardware Product
from the original end-user purchaser.
PRODUCT WARRANTY PERIOD TABLE
PRODUCT TYPE
RGBW Light Bulb
PRODUCT WARRANTY
PERIOD
One (1) year
IMPORTANT
The content of “Product Type” listed above is subject to change;
please refer to the www.zipato.com for latest update.
ERFORMANCE OF THE LIMITED
P
PRODUCT WARRANTY
If a product defect occurs, ZIPATO’s sole obligation shall be to
repair or replace any defective Zipato Hardware Product free of
charge provided it is returned to an Authorized ZIPATO Service
Centre during the Limited Warranty Period. Such repair or
replacement will be rendered by ZIPATO at an Authorized ZIPATO
Service Centre. All component parts or hardware products that
are replaced under this Limited Product Warranty become the
property of ZIPATO. The replacement part or product takes on the
remaining Limited Warranty Period of the replaced part or product.
The replacement product need not be new or of an identical make,
model or part; ZIPATO may in its discretion replace the defective
product (or any part thereof) with any reconditioned equivalent (or
superior) product in all material respects to the defective product.
WARRANTOR
Tri plus grupa d.o.o.
Banjavciceva 11
10 000 Zagreb
CROATIA
TEL +385 (0)1 4004 404
FAX +385 (0)1 4004 405
make your home smart
DECLARATION OF CONFORMITY
The Manufacturer Tri plus grupa d.o.o. hereby declares that the
product:
RGBW LIGHT BULB
In accordance with the following Directive(s): 2006/95/EC The Low
Voltage Directive, 89/336/EEC The Electromagnetic Compatibility
Directive and 1999/5/EC R&TT EC Directive is in conformity with the e
applicable requirements of the following documents:
EN 61326
EN 61000-3-3 EN 61000-4-4 EN 61000-4-11
IEC/EN 55011 EN 61000-6-2 EN 61000-4-5 EN 301 489-1-3
EN 300 220-2 EN 61000-4-2 EN 61000-4-6 AS/NZS/IEC 60335-2-97
EN 61000-3-2 EN 61000-4-3 EN 61000-4-8 EN 60335-1
I hereby declare that the equipment named above has been
designed to comply with the relevant sections of the above
referenced specifications. The unit complies with all applicable
Essential Requirements of the Directives.
Person responsible for this declaration:
Dean Janacek, Certification Manager
01.09.2012
Changes or modifications not expressly approved Tri plus grupa
d.o.o. for compliance could void the user’s authority to operate the
equipment.
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES.
Operation is subject to the following two conditions:
1 | this device may not cause harmful interference, and
2 | this device must accept any interference received, including
interference that may cause undesired operation.
Le présent appareil est conforme aux CNR d’Industrie Canada
applicables aux appareils radio exempts de licence. L’exploitation
est autorisée aux deux conditions suivantes :
1 | l’appareil ne doit pas produire de brouillage, et
2 | l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement.
NOTE: Changes or modifications not expressly approved by Zipato
for compliance could void the user’s authority to operate the
equipment. This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
COPYRIGHT
© 2014 Tri plus grupa d.o.o. All Rights Reserved.
No part of this manual may be reproduced or transmitted in any form
without the expressed, written permission of Tri plus grupa d.o.o.
www.zipato.com