Bissell | 35F3 | User`s guide | Bissell 35F3 User`s guide

Bissell 35F3 User`s guide
SPOTlifter
®
POWERBRUSH
HAND HELD DEEP CLEANER
U S E R ’ S
G U I D E
1716 Series
Thanks / Consumer Services
2
Safety Instructions
3
Product View
5
Features / Assembly
Operation
6-7
Clean-Up/Storage 8-9
Troubleshooting
Replacement Parts
About Your Warranty
12
11
10
4
Thanks for buying a BISSELL SpotLifter® Powerbrush
We’re glad you purchased a BISSELL SpotLifter® PowerBrush Handheld
Deep Cleaner. Everything we know about floor care went into the design
and construction of this handy, home cleaning product.
Your BISSELL SpotLifter® PowerBrush is well made, and we back it with a
limited one-year warranty. We also stand behind it with a knowledgeable,
dedicated Consumer Services department, so, should you ever have a
problem, you’ll receive fast, considerate assistance.
My great-grandfather invented the floor sweeper in 1876. Today, BISSELL
is a global leader in the design, manufacture, and service of high quality
homecare products like your BISSELL SpotLifter® PowerBrush.
Thanks again, from all of us at BISSELL.
Mark J. Bissell
President and Chief Executive Officer
BISSELL Consumer Services
For information about repairs or replacement parts, or questions about your warranty, call:
BISSELL Consumer Services
1-800-237-7691
Monday - Friday
8 a.m. — 10 p.m. ET
Saturday
9 a.m. — 8 p.m. ET
Or write:
BISSELL Homecare, Inc.
PO Box 3606
Grand Rapids, MI 49501
ATTN: Consumer Services
Or visit the BISSELL website - www.bissell.com
When contacting BISSELL, have model number of unit available.
Please record your Model Number: ___________________
Please record your Purchase Date: ___________________
NOTE: Please keep your original sales receipt. It provides proof of date of purchase in
the event of a warranty claim. See "About Your Warranty" on page 12 for details.
2
IMPORTANT SAFETY INSTRUCTIONS
When using an electrical appliance,
basic precautions should be observed,
including the following:
Read all instructions before using your
SpotLifter® PowerBrush
WARNING:
To reduce the risk of fire, electric shock
or injury:
■ Do not use for any purpose other than
described in this User’s Guide.
■ Use only BISSELL cleaning products
intended for use in this appliance.
■ Use only manufacturer’s recommended
attachments.
■ Do not expose to rain, store indoors.
■ Do not handle plug or appliance with
wet hands.
■ Do not leave SpotLifter® PowerBrush
when it is plugged in.
■ Do not put any object into appliance
openings or use with blocked openings.
Keep free of dust, lint, hair, and anything
that may reduce air flow.
■ Do not expose hair, loose clothing, fingers
or body parts to openings or moving parts.
■ Be extra careful when cleaning stairs.
■ Do not allow to be used as a toy. Close attention
is necessary when used by or near children.
■ Do not pick up hot or burning objects.
■ Do not pick up flammable or combustible
materials (lighter fluid, gasoline, kerosene,
etc.) or use in the presence of explosive
liquids or vapor.
■ Do not pick up toxic material (chlorine bleach,
ammonia, drain cleaner, gasoline, etc.).
■ Do not use appliance in an enclosed space
filled with vapors given off by oil base paint,
paint thinner, some moth proofing substances,
flammable dust, or other explosive or toxic vapors.
■ Do not pull or carry by cord, use cord as a
handle, close door on cord, pull cord around
sharp corners or edges, run appliance over
cord, or expose cord to heated surfaces.
■ Do not use with damaged cord or plug.
■ Do not immerse. Use only on surface
moistened by cleaning process.
■ Do not use SpotLifter® PowerBrush if it
has been dropped, damaged, left outdoors
or dropped into water. Have it repaired at
an Authorized Service Center.
■ Turn off all controls before unplugging.
Unplug from outlet when not in use and before
conducting maintenance and troubleshooting.
■ Unplug by grasping the plug, not the cord. Do
not unplug by pulling on cord.
■ Always connect to a properly grounded outlet;
see grounding instructions.
■ Do not modify the 3-prong grounded plug.
WARNING: The Power Cord on this product
contains lead, a chemical known to the State of
California to cause birth defects or other reproductive harm.
WASH HANDS AFTER HANDLING.
■
SAVE THESE INSTRUCTIONS
GROUNDING INSTRUCTIONS
This appliance must be connected to a
grounded wiring system. If it should
malfunction or break down, grounding
provides a safe path of least resistance for
electrical current, reducing the risk of
electrical shock. The cord for this appliance
has an equipment-grounding conductor and
a grounding plug. It must only be plugged
into an outlet that is properly installed and
grounded in accordance with all local codes
and ordinances.
Grounded
Outlets
Grounding Pin
WARNING:
Improper connection
of the equipment-grounding conductor
can result in a risk of electrical shock.
Check with a qualified electrician or
service person if you aren’t sure if the outlet
is properly grounded. DO NOT MODIFY THE
PLUG. If it will not fit the outlet, have a
proper outlet installed by a qualified
electrician. This appliance is designed for
use on a nominal 120-volt circuit, and has a
grounding attachment plug that looks like
the plug in the drawing above. Make certain
that the appliance is connected to an outlet
having the same configuration as the plug.
No plug adapter should be used with
this appliance.
This model is for household use only.
3
Product View
2.
Clean/Solution Tank
3.
1.
Clean/Solution
Tank Tabs
Power Switch
5.
Manual Trigger Spray
6
Power Cord
4.
Dirty/Collection Tank
9.
Removable Brush
Cartridge with Dual
PowerBrushes
10.
Spray Nozzle
7.
8.
Belt Cover Door
Circuit Interrupting
Device (C.I.D.)
CAUTION:
Use only BISSELL
formula in your cleaner.
Little Green®
Use of cleaning formulas which contain
lemon or pine oil may damage this
appliance and void warranty. Do not
use chemical spot cleaners or
solvent-based soil removers. These
products may react with the plastic
materials used in your cleaner, causing
cracking or pitting.
4
SpotLifter® PowerBrush Product Features
1.
Power Switch (Black). Turns on the unit.
O = “OFF” position
I = “ON” position
2.
Clean/Solution Tank. Holds Little Green® Formula
and water.
3.
Clean/Solution Tank Tabs. Gently press into remove
the Clean/Solution Tank.
4.
Dirty/Collection Tank. Collects dirty water and
solution. You will need to remove the Clean/Solution Tank
before you can remove get to the Dirty/Collection Tank.
5.
6.
7.
8.
9.
10.
Manual Trigger Spray. Dispenses water and solution.
Power Cord.
Circuit Interrupting Device (C.I.D.). Because you will
be using this product in wet environments, such as bathrooms, we have equipped this unit with this added safety
feature. The C.I.D. shuts off the product in potentially hazardous situations. The C.I.D. has test (white) and reset
(red) buttons which should be operated each time the
product is plugged in.
WARNING:
Do not plug in your SpotLifter
PowerBrush until you have
completely reviewed the
following instructions and
have become familiar with
all instructions and
operating procedures.
Belt Cover Door.
Removable Brush Cartridge with Dual
Powerbrushes.
Spray Nozzle
Assembly
There are no steps required for assembly.
5
How To Use Your SpotLifter® PowerBrush
Filling Your Clean/Solution Tank
1.
2.
3.
1.
Remove the Clean Tank by gently pressing the Quick
Release tabs on the Clean Tank and sliding the tank off
of the unit.
Open the tank by unscrewing and removing the cap.
Add water and formula* to the indicated fill lines on the
Clean Tank.
*NOTE: Your SpotLifter PowerBrush includes an
8 oz. Trial size formula starter bottle.
2.
Replace the cap before placing the tank back on
the unit.
Pre-Treating
To aid in the removal of tough, stubborn stains, pre-treating the
stain may be necessary.
1.
2.
Hold the unit above the area to be cleaned. Using the
Manual Trigger Spray, apply a sufficient amount of water
and solution to the stain.
Wait 3-5 minutes before cleaning.
Cleaning
1.
2.
3.
6
2.
Plug in the unit.
While holding the SpotLifter PowerBrush above the area
to be cleaned, apply water and formula by depressing
the Manual Trigger Spray, dispensing fluid to the
soiled/stained area.
Turn the power switch to the “ON” position. ( I )
3.
Cleaning Continued
4.
Brushing and Suction can be done separately, based on
how you hold and use the unit.
To Use The Dual Powerbrushes Only:
Tilt the unit forward slightly, placing both brushes in contact with the carpet. The flat surface of the brush cartridge should be parallel to the surface being cleaned
For Suction Only:
Tilt the unit forward, pressing the front of the Spotlifter
Powerbrush firmly against the surface area to be
cleaned, lifting the brushes up off the surface. Pull
toward you to remove the soil and cleaning solution.
Note: Step #4 may be repeated until no more
dirty water is removed or until the area to be
cleaned meets your satisfaction.
5.
Check the Dirty/Collection tank and empty the tank if it is
full (See Clean Up/Storage, page 8).
6.
If the Spotlifter PowerBrush stops spraying, turn off the
unit and check the Cleaning Solution level in the
Clean/Solution Tank. Refill if needed. Never run dry.
Deep Cleaning Upholstery
1.
2.
3.
Check manufacturer’s tag before cleaning. “W” or “WS” on
the tag means you can use your SpotLifter PowerBrush. If
tag is coded with an “S” (with diagonal strike-through) or
states “Dry Clean Only”, do not proceed.
Tip:
You may also spray water
and formula, with the
Manual Trigger Spray, while
the unit is turned on and
you are using the Dual
PowerBrushes and Suction
to clean.
Tip:
Fast attention to a spill on
upholstery can prevent
permanent staining.
If manufacturer’s tag is missing or not coded, check with
your furniture dealer.
If possible, check upholstery stuffing. Colored stuffing
may bleed through fabric when wet.
Cleaning Spills From Hard Surfaces
1.
Turn the unit on to activate the suction.
2.
Press the front of SpotLifter PowerBrush firmly against
surface to vacuum the spill.
3.
Press the Manual Trigger Spray to apply the
cleaning solution.
4.
Press the front of the SpotLifter PowerBrush firmly
against the surface to vacuum the cleaning solution.
5.
Check the Dirty/Collection tank and empty the tank if it is
full (See Clean Up/ Storage, page 8).
6.
If the SpotLifter PowerBrush stops spraying, turn off the
unit and check the Cleaning Solution level in the
Clean/Solution Tank. Refill if needed. Never run dry.
Tip:
When cleaning a vertical
surface (ie chair back, auto
interior, etc.) begin with a
completely empty
Dirty/Collection Tank.
7
Clean-Up/Storage
1.
2.
3.
Turn the power switch to the “OFF” position. ( O )
Unplug the unit.
Carry the SpotLifter PowerBrush to the sink or drain.
To Empty the Dirty/Collection Tank
1.
2.
First you need to remove the Clean/Solution Tank. Gently
press the Quick Release tabs on the Clean/Solution Tank
and slide the tank off of the unit.
1.
Grab the Dirty/Collection Tank and pull to remove.
3.
While at the sink, remove the Tank Cap by turning
approximately 1/4 turn counterclockwise and lift
out the cap.
4.
Empty the tank. Rinse the Dirty/Collection tank with
warm water.
5.
Replace cap and turn approximately 1/4 turn clockwise,
until snug.
2.
3.
6.
Slide the Dirty/Collection Tank into the unit. Replace the
Clean/Solution Tank.
Note: If a significant amount of water and formula
remains in the Clean/Solution Tank, you may
leave it in the Clean/Solution Tank for your next
cleaning task.
To Clean the Dual Powerbrushes
1.
1.
2.
3.
8
NOTE: Make sure the Power Switch is in the
“OFF” position. ( O )
Firmly grasp the Brush Cartridge from the side of the
unit and pull out from the unit.
To remove any debris that may have collected around
the Dual Powerbrushes, rinse the Brush Cartridge under
warm water.
Replace the Brush Cartridge into the unit by gently
guiding the Cartridge in the unit. Once it is in place,
firmly “snap” the Brush Cartridge in place.
NOTE: Do not attempt to remove or insert the
Brush Cartridge while the unit is running. This
will damage your unit.
2.
Putting It Away
Store in a dry area, at room temperature to avoid freezing.
To Replace the PowerBrush Belt
1.
2.
3.
4.
If the belt should break, to replace:
Remove the screw in the belt cover using a Phillips
Screwdriver.
Tip:
If you do not have the Brush
Cartridge in all the way, the
Dual Powerbrushes will not
rotate. Firmly push the
cartridge in place, while
listening for the “snap” to
know it is in all the way
1.
Take the broken belt out.
Replace the new belt over the 2 belt gears.
Replace the belt cover door.
WARNING:
To reduce the risk of
fire, electric shock or
injury unplug from outlet
before servicing.
9
Troubleshooting
Cleaner won’t run.
Possible Causes
1
2
3
Power cord not plugged in
Blown fuse/tripped breaker
C.I.D. needs to be reset
Remedies
1
2
3
Check electrical plug
Replace household fuse or reset breaker
Reset C.I.D. (page 5)
Reduced spray or no spray.
Possible Causes
1
2
3
Spray Nozzle clogged
Clean/Solution Tank empty
Tank not in place properly
Remedies
1
2
3
Clean Spray Nozzle
Check/Refill Tank
Make sure tank is inserted properly.
Deep Cleaner Won’t pick up cleaning solution.
Possible Cause
1
2
Dirty/Collection Tank is full
Dirty/Collection Tank drain plug is loose
Remedies
1
2
Empty Dirty/Collection Tank
Check plug for snug fit
Dual PowerBrushes are not rotating.
Possible Causes
Remedies
1
Removable Cartridge not inserted properly/all the way
1
2
Broken Belt
2
Make sure to firmly “snap” the Brush Cartridge
in place
Replace Belt (page 9)
Water Coming Out Vents.
Possible Causes
1
2
10
Tank is past full line.
Unit is not in a horizontal position
with the surface being cleaned.
Remedies
1
2
Empty Tank
Empty Tank
WARNING:
Do not use an extension
WARNING:
To reduce the risk of
cord with this product. The
use of an extension cord
may result in a severe
electrical shock, particularly
if the extension cord does
not have an electrical rating
higher than that of the
product, OR if the extension
cord does not have a
three-prong grounding plug
and if the extension cord is
not plugged into a circuit
box with a ground fault
circuit interrupter. Safety
precautions such as
keeping all connections off
the ground and dry will not
eliminate the danger.
fire, electric shock or
injury unplug from outlet
before servicing.
Replacement Parts
Item
1
2
3
4
5
6
7
Part No.
203-2501
203-2502
203-2513
203-2504
203-2514
203-2517
203-2516
CLEANING FORMULAS
8
497
9
499
10
797
11
799
Part Name
Clean/Solution Tank w/Cap
Clean/Solution Tank Cap Only
Dirty/Collection Tank w/Plug
Dirty/Collection Tank Plug Only
Brush Cartridge
Belt Cover
Belt
64 oz. Little Green® Formula
32 oz. Little Green® Formula
64 oz Pet Odor & Stain Removal® Formula
32 oz Pet Odor & Stain Removal® Formula
1
2
3
4
5
6
7
8
9
10
11
11
About Your Warranty
This warranty gives you specific legal rights, and you may also have other rights which
may vary from state to state. If you need additional instruction regarding this warranty
or have questions regarding what it may cover, please contact BISSELL Consumer
Services by e -mail, telephone, or regular mail as described below.
Limited One Year Warranty
Subject to the *EXCEPTIONS AND EXCLUSIONS identified below, upon receipt of the
product BISSELL Homecare Inc. will repair or replace (with new or remanufactured
components or products), at BISSELL’s option, free of charge from the date of
purchase by the original purchaser, for one year any defective or malfunctioning part.
See information below on "If your BISSELL product should require service".
This warranty applies to product used for personal, and not commercial or rental
service. This warranty does not apply to fans or routine maintenance components such
as filters, belts, or brushes. Damage or malfunction caused by negligence, abuse, or
use not in accordance with the User's Guide is not covered.
If your BISSELL product should require service:
Call BISSELL Consumer Services at the number below or visit the BISSELL website www.bissell.com to locate a BISSELL Authorized Service Center in your area.
If you need information about repairs or replacement parts, or if you have questions
about your warranty, contact BISSELL Consumer Service
Website or E-mail:
www.bissell.com
Use the “Customer Services” tab.
Or Call:
BISSELL Consumer Services
1-800-237-7691
Monday - Friday 8 a.m. - 10 p.m. ET
Saturday 9 a.m. - 8 p.m. ET
Or write:
BISSELL HOMECARE, INC.
PO Box 3606
Grand Rapids MI 49501
ATTN: Consumer Services
BISSELL HOMECARE, INC. IS NOT LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES OF ANY NATURE
ASSOCIATED WITH THE USE OF THIS PRODUCT. BISSELL’S LIABILITY WILL NOT EXCEED THE PURCHASE
PRICE OF THE PRODUCT.
Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or
exclusion may not apply to you.
*EXCEPTIONS AND EXCLUSIONS FROM THE TERMS OF THE LIMITED WARRANTY
THIS WARRANTY IS EXCLUSIVE AND IN LIEU OF ANY OTHER WARRANTIES EITHER ORAL OR WRITTEN.
ANY IMPLIED WARRANTIES WHICH MAY ARISE BY OPERATION OF LAW, INCLUDING THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED TO
THE ONE YEAR DURATION FROM THE DATE OF PURCHASE AS DESCRIBED ABOVE.
©2003 BISSELL Homecare, Inc
Some states do not allow limitations on how long an implied warranty lasts, so the above limitation may
not apply to you.
12
Grand Rapids, Michigan
All rights reserved. Printed in China.
Part Number 603-2303
Rev 07/03
Visit our website at:
www.bissell.com
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising