Compaq | Dl180 - G6 E5504 2X2gb 4Lff Svr | QuickSpecs | Compaq Dl180 - G6 E5504 2X2gb 4Lff Svr QuickSpecs

QuickSpecs
HP ProLiant DL180 Generation 6 (G6)
Overview
Front View:
1. Access panel
2. Front LED Indicators
3. Power on/off
4. Optional DVD-RW or DVD-ROM drive
5. Front USB Ports (2)
6. Non-Hot Plug Non Redundant fans (4 fans)
7. Air Baffle
8. PCI Cage
9. System Board
Rear View:
1.
Redundant Power Supply Bay (Optional)
2.
Power Supply Cable Socket
3.
Low Profile Card Slot
4.
PCI Expansion Card Slot
5.
PCI Expansion Card Slot
6.
UID LED Button
7.
(Optional) LO100i 10/100 Mbps LAN port for IPMI
management (RJ-45)
8.
LAN Port
9.
LAN Port
10. 2 Rear USB 2.0 Ports
11. VGA Port
12. Serial Port
What's New
Support for NC375T PCI Express Quad Port Gigabit Server Adapter
At A Glance
The HP ProLiant DL180 G6 is a low cost high capacity storage optimized 2-way server that delivers on a history of design excellence
and 2U density for a variety of rack deployments and applications.
Processors:
Processors
Supports up to two Quad-Core Intel® Xeon® processors: 5500 sequence with 8MB Level 3 cache
Intel® 5520 Chipset
Memory:
Memory
Up to 12 DIMM slots
Up to 192GB, using 16GB Quad-Rank PC3-8500R-7 DDR3 Registered (RDIMM) memory, operating at 800MHz when
fully populated at 2 DIMMs per Channel in 12 slots
Up to 96GB, using PC3-10600R DDR3Registered (RDIMM) memory, operating at 1066MHz when fully populated at 2
DIMMs per Channel in 12 slots.
Up to 24GB, using PC3-10600E DDR3 Unbuffered (UDIMM) memory, operating at 1066MHz when fully
DA - 13248
North America — Version 12 — November 25, 2009
Page 1
QuickSpecs
HP ProLiant DL180 Generation 6 (G6)
Overview
populated at 2 DIMMs per Channel in 12 slots
NOTE: Half DIMM slots are available when one processor is installed.
Internal Drive Support:
Support
Support for up to twenty-five (25) SFF with a Smart Array controller.
Support for up to fourteen (14) LFF with a Smart Array controller:
Hot Plug Serial ATA (SATA) Models: Up to 14.0TB (14 x 1TB Hot Plug 3.5" hard drives)
Hot Plug Serial Attached SCSI (SAS) Models: SAS Model: Up to 14.0TB (14 x 1TB Hot Plug 3.5" hard drives)
NOTE: Four (4), eight (8) and twelve (12) hard drives models are supported standard via BTO. Eight (8) and
twelve (12) hard drive model support requires the addition of a Smart Array or HBA controller. Hot Plug and SAS
functionality require the addition of a Smart Array or HBA controller.
Network Controller:
Controller
HP NC362i Integrated Dual Port Gigabit Server Adapter
HP NC375T PCI Express Quad Port Gigabit Server Adapter
Storage Controllers:
Controllers
4 HDD BTO Models: HP Embedded SATA RAID Controller RAID 0,1,10
NOTE: Embedded SATA controller support transfer rate up to 1.5Gb/s SATA
NOTE: To enable RAID on Embedded SATA, use the HP Smart Array B110i SATA Raid controller, To enable use of the
B110i, enter the ROM based setup utility(RBSU). The option for enabling RAID can be found in the Advanced section of
the RBSU
8 HDD BTO Models: HP Smart Array P410 /256MB Controller (RAID 0/1/1+0/5/5+0
12 HDD BTO Models: HP Smart Array P212 /256MB Controller(RAID 0/1/1+0/5/5+0)
NOTE: A minimum of 256 MB cache, battery kit, and Smart Array Advanced Pack License Key upgrade is required to
enable RAID 6, 6+0
Internal Drive Support:
Support
Standard model drive bays:
Four (4) 3.5"Large Form Factor (LFF) hot-plug drive bays supporting up to 6Gb/s SAS or 3Gb/s SATA transfer
rate. NOTE: Embedded SATA controller support transfer rate up to 1.5Gb/s SATA. HP Smart Array P212 or
P410 controller is required to achieve 6Gb/s SAS or 3Gb/s SATA transfer rate
Eight (8) 3.5" Large Form Factor (LFF) hot-plug drive bays supporting up to 6Gb/s SAS or 3Gb/s SATA transfer
rate.
Twelve (12) 3.5" Large Form Factor (LFF) hot-plug drive bays supporting up to 3Gb/s SAS or 3Gb/s SATA
transfer rate.
Optional drive bays:
Twenty Five (25) 2.5" Small Form Factor (SFF) hot-plug drive bays supporting up to 6Gb/s SAS or 3Gb/s SATA
transfer rate.
Eight (8) 2.5" Small Form Factor (SFF) hot-plug drive bays supporting up to 6Gb/s SAS or 3Gb/s SATA transfer
rate.
Rear Two (2) 3.5" Large Form Factor (LFF) hot-plug drive bays to use with 12LFF bays supporting up to 3Gb/s
SAS or 3Gb/s SATA transfer rate. NOTE: Full Height/ Full Length Riser Option is not available when the Rear
2LFF drive bays is selected for the system.
NOTE: All Hard drive bay options except 4LFF require HP Smart Array P410 or P212 controller. NOTE: To
achieve highest possible stated transfer rate please make sure the firmware on the drive bays (backplanes) and
HP Smart Array controller up to date. Latest firmware are available to download from HP support web site.
Hard disk drives support:
Up to 14.0TB (14 x 1TB Hot Plug Serial-attached SCSI (SAS) or Serial ATA (SATA) drives 3.5" hard drives)
Up to 12.5 TB (25 x 500GB Hot Plug Serial-attached SCSI (SAS) or Serial ATA (SATA) drives 2.5" hard drives)
Expansion Slots:
Slots
Up to Four (4) available PCI-Express Slots via the Three (3) PCI-E Slot Riser
One available Low Profile x16 PCI-Express slot using a Low profile Riser
Two Full Height/ Full Length Riser options:
Option1: 2 PCIe2x8 full-length/full-height PCI-Express slots (Standard)
Option2: 2 PCI-X, full-length/full-height riser Slots(Optional)
DA - 13248
North America — Version 12 — November 25, 2009
Page 2
QuickSpecs
HP ProLiant DL180 Generation 6 (G6)
Overview
Option 3: 1 PCIe2x16 full-length / full-height slot (Optional)
Option 4: 2 PCIe2x8 and 1 PCIex8(4) full-length/full-height slots (Optional)
NOTE: Full Height/ Full Length Riser Option are not available when the Rear 2LFF drive bay is selected for the
system.
Redundancy:
Redundancy
Fully redundant non-hot plug fans (Optional)
Hot plug power supply with optional redundancy
Power Sources:
Sources
Dual Common Slot Bay for Right Sized, Hot plug and Redundant Power
HP 750W CS HE Gold Power Supply (Standard on some models)
HP 460W CS HE Gold Power Supply (Standard on some models)
Infrastructure Management:
Management
With G6, ProLiant 100-series server administrators are able to deploy and monitor their servers using methods similar
to 300 series servers and above. Agents and the Easy Set-up CD are available that provide a user experiences
consistent with 300 series and above.
With Easy Set-up CD, customers get SmartStart "like" deployment tools that reduce the time required for server
setup and updates. Easy Set-up CDs and their ISO images are provided with each ProLiant G6 100-series server
and are used to perform assisted installations for one or two servers. Users performing multi-server installations
involving large numbers of servers may require the following deployment tools:
SmartStart Scripting Toolkit - Automated scalable deployment utility
Smart Components - a self-executable software consisting of driver and firmware
With agents and providers, ProLiant 100 series servers get environmental monitoring that is similar and consistent
to that of ProLiant 300 series servers and above. This server now offers the HP Insight Management Agents and
HP Insight Management WBEM Providers, two well established sets of management and Internet standards
technologies that provide capabilities which provide integration to HP Systems Insight Manager (SIM).
HP Insight Control for Linux, a product option, delivers essential infrastructure management that can help save time and
money by making it easy to deploy, migrate, monitor, control and optimize your IT infrastructure through a single,
simple management console. Insight Control for Linux supports Linux-based central management servers.
Ports:
Ports
Five USB ports (two front, two rear , one optional internal)
NOTE: In order to utilize the internal USB port the USB cable (P/N: 536769-B21) must be connected to the internal
USB header
Optical Drive:
Drive
Support for one (optional): DVD-ROM, DVD/CD RW
NOTE: In the12LFF or 25SFF drives bay model Optical drives are required to be installed with rear option kit (P/N
515826-B21)
Form Factor:
Factor
2U rack models
Operating Systems and Virtualization Software:
Supports Windows, RHEL, SLES, Solaris, VMware, and Citrix Essentials for XenServer (Retail)
Deployment/Serviceability:
Deployment/Serviceability
HP ProLiant DL180 G6 models have fixed rails which provide support for racks with round mounting holes and tool-free
support for racks with square mounting holes (including Compaq/HP 7000, 9000, 10000 and HP series), with an
adjustment range of 26" - 36"
Tool-less access to all system components for easy in rack serviceability
Customer Self Repair (CSR): HP products are designed with many CSR parts to minimize repair time and allow for
greater flexibility in performing defective parts replacement
Warranty:
Warranty
This product is covered by a global limited warranty and supported by HP Services and a worldwide network of HP
Authorized Channel Partners. Hardware diagnostic support and parts replacement is available for three years from date
of purchase. Support for software and initial setup is available for 90 days from date of purchase. Enhancements to
warranty services are available through HP Care Pack services or customized service agreements. Hard drives have
DA - 13248
North America — Version 12 — November 25, 2009
Page 3
QuickSpecs
HP ProLiant DL180 Generation 6 (G6)
Overview
either a one year or three year warranty; refer to the specific hard drive QuickSpecs for details.
NOTE: Server Warranty includes 3-Years Next Business Day Parts replacement, 0-Years Labor, 0-Years Onsite support.
Additional information regarding worldwide limited warranty and technical support is available at:
http://h18004.www1.hp.com/products/servers/platforms/warranty/index.html
DA - 13248
North America — Version 12 — November 25, 2009
Page 4
QuickSpecs
HP ProLiant DL180 Generation 6 (G6)
Standard Features
NOTE: For the Standard Features shipped in the Factory Integrated Models, please see the "Configuration Information - Factory
Integrated Models" section.
Processor
Quad-Core Processors
One of the following
Intel® Xeon® Processor E5540 (2.53 GHz, 8MB L3 Cache, 80W, DDR3-1066, HT, Turbo 1/1/2/2)
depending on Model
Intel® Xeon® Processor E5520 (2.26 GHz, 8MB L3 Cache, 80W, DDR3-1066, HT, Turbo 1/1/2/2)
Intel® Xeon® Processor L5520 (2.26 GHz, 8MB L3 Cache, 60W, DDR3-1066, HT, Turbo 1/1/2/2)
Intel® Xeon® Processor E5504 (2.00 GHz, 4MB L3 Cache, 80W, DDR3-800)
NOTE: HT indicates that the processor model supports Intel® Hyper-Threading Technology.
NOTE: Turbo indicates the maximum potential frequency increment when using Intel® Turbo Boost
Technology, with 4, 3, 2, and 1 cores active.
NOTE: DDR3 speed is the maximum memory speed of the processor. Actual memory speed may
depend on the quantity and type of DIMMs installed.
NOTE: For the Intel 5500 Series, the letter preceding the model number indicates the
performance/wattage of the processor. "X" denotes High Performance/Wattage; "E" denotes Enterprise
Performance/Wattage (Mainstream); and "L" denotes Lower Wattage.
Upgradeability
Upgradeable to two processors
Chipset
Intel® 5520 Chipset
NOTE: For more information regarding Intel chipsets, please see the following URL:
http://www.intel.com/products/server/chipsets/.
Cache Memory
4 MB Level 3 cache (E5504)
8 MB Level 3 cache (L5520, E5520, E5540)
Memory Protection
Advanced memory protection
Memory
Type
Standard
DDR3 Registered (RDIMM) or Unbuffered (UDIMM)
4 GB
(2 x 2 GB)
6 GB
(3 x 2 GB)
12 GB
(6 x 2 GB)
Maximum (RDIMM)
192 GB
(12 x 16 GB)
Maximum (UDIMM)
24 GB
(12 x2 GB)
NOTE: Depending on the memory configuration and processor model, the memory speed may run at
1333MHz, 1066MHz, or 800MHz. Please see the Online Memory Configuration Tool at:
www.hp.com/go/ddr3memory-configurator.
DDR3 memory options part number decoder
DA - 13248
North America — Version 12 — November 25, 2009
Page 5
QuickSpecs
HP ProLiant DL180 Generation 6 (G6)
Standard Features
Network Controller
Expansion Slots
HP NC362i Integrated Dual Port Gigabit Server Adapter
Slot Number
Bus Speed
Bus Number*
Number
6
5
Device
Number**
Number
0
0
Hot Plug
(Y/N)
N
N
1
2
x16 PCI-Express
x8 PCI-Express
2
x8 PCI-Express
4
0
N
3
x4 PCI-Express
3
0
N
3
PCI-X***
Dynamic
1
N
3
PCI-X***
Dynamic
2
N
Notes
Low Profile
Full Length
Full Height
Full Length
Full Height
Full Length
Full Height
Full Length
Full Height
Full Length
Full Height
NOTE: All slots can accept universal keyed PCI cards.
* Default bus assignment. Inserting cards with PCI bridges may alter the actual bus assignment number.
** Slots are enumerated differently based on OS. MS OS's enumerate from lowest to highest Device ID
by bus (starting with the lowest bus).
*** PCI-X bus speed will be 100MHz in maximum and support two PCI-X/100MHz cards.
**** Slot 2 contains bus 4 and bus 5 because BIOS configures this x16 PCI-express.
NOTE: Slot to two x8 PCI-express slot for production riser, this is valid only on Option1: 2 PCIe2x8 fulllength/full-height PCI-Express slots (Standard) or Option 4: 2 PCIe2x8 and 1 PCIex8 (4) full-length/fullheight slots (Optional).
DA - 13248
North America — Version 12 — November 25, 2009
Page 6
QuickSpecs
HP ProLiant DL180 Generation 6 (G6)
Standard Features
Storage Controller
4HDD Models
8HDD Models
12HDD Models
HP Embedded SATA RAID Controller (integrated into the south-bridge)
supporting SW RAID 0,1,10
NOTE: Transfer rate up to 3.0 Gb/s SATA.
HP Smart Array B110i SATA RAID
NOTE: To enable RAID on Embedded SATA, use the HP Smart Array B110i
SATA Raid controller, To enable use of the B110i, enter the ROM based
setup utility(RBSU). The option for enabling RAID can be found in the
Advanced section of the RBSU.
HP Smart Array P410/256MB Controller (RAID 0/1/1+0/5/5+0)
HP Smart Array P212/256MB Controller (RAID 0/1/1+0/5/5+0)
NOTE: Available upgrades: 256MB with BBWC, 512MB with BBWC, Battery
kit upgrade (for the 256MB cache), and Smart Array Advanced Pack (SAAP).
NOTE: A diskette drive or virtual FDD using LO100 Advanced Pack is needed to install storage
controller drivers during a Windows operating system installation from a CD.
NOTE: A minimum of 256 MB cache, battery kit, and Smart Array Advanced Pack License Key upgrade
(P/N: 516471-B21) is required to enable RAID 6, 6+0
Storage
Maximum Internal
Storage
Diskette Drives
Optical Drives
Drive Bays
Via USB only
Optional HP Slim SATA DVD-ROM Optical Drive
Optional HP Slim SATA DVD RW Optical Drive
NOTE: Support in 4, 8, and 12 drive models. Optical drives can only be
installed in 12 drive model and 25SFF drive bay system with rear option kit
(P/N 515826-B21).
Up to 14 Hot Plug SAS/SATA 3.5" drives
Up to 25 Hot Plug SAS/SATA 2.5" drives
NOTE: 4 Drive Models are Non-Hot Pluggable. Smart Array Controller must
be added for Hot Plug drive capability. 4 Drive Models can be upgraded
with the addition of a Smart Array Controller and a SAS/SATA Multi-lane
cable (496013-B21).
NOTE: The addition of a Smart Array Controller requires the addition of a
SAS/SATA Multi-lane cable (P/N 496013-B21).
Hot Plug 3.5" SATA
Hot Plug 3.5" SAS
Hot Plug 2.5" SATA
Hot Plug 2.5" SAS
14.0TB
14.0TB
12.5TB
12.5TB
DA - 13248
14 x 1TB
14 x 1TB
25 x 500GB
25 x 500GB
North America — Version 12 — November 25, 2009
Page 7
QuickSpecs
HP ProLiant DL180 Generation 6 (G6)
Standard Features
Interfaces
Network RJ-45 (Ethernet)
Serial
Graphics
USB
2 10/100/1000 NIC ports (plus 1 dedicated for the HP ProLiant Lights Out
100i Remote Management)
1
1
5 total ports: (2) front, (2) rear, (1) optional internal
NOTE: In order to connect a USB device internally, the internal USB Cable
G6 Kit must be used (P/N 536769-B21).
NOTE: Please see the following URL for additional information regarding
USB support:
http://h18004.www1.hp.com/products/servers/platforms/usb-support.html.
Graphics
32MB* shared supporting all display resolutions up to 1600x1200 16bpp@75Hz
NOTE: 8MB is dedicated to video memory.
Form Factor
Rack (2U), (3.5 in/8.89 cm)
Embedded Manageability HP ProLiant Onboard
Administrator and
LO100i Advanced
HP ProLiant Onboard Administrator Powered by Lights-Out 100i, simplifies
server setup, control, and lights-out remote administration of ProLiant 100
Series servers and functions without additional software. It can be accessed
from any location via LAN or Internet and works hand-in-hand with HP
Systems Insight Manager (SIM), helping customers unlock the value of the
ProLiant platform and deliver the highest possible quality of IT service to the
business. Advanced Licenses are required for Virtual KVM and Virtual Media
feature activation.
Key features of LO100i are:
IPMI 2.0 & SMASH CLP support
ROM Setup Utility
Improvements to virtual media with the addition of USB 2.0 drives and
protocol support for much faster transfer speeds and DVD-ROM
support plus simplified virtual media (floppy and CD with no FTTP
server requirements)
Enhanced browser interface and embedded KVM over IP provides OSindependent remote graphical console
24x7 Technical Support and Update (TSU) 1 year support and license
upgrades included in Advanced license
HP Insight Control
management software
HP Insight Control for
Linux
NOTE: For more information, see: http://www.hp.com/go/lo100
HP Insight Control for Linux, as a product option, delivers essential
infrastructure management that can help save time and money by making it
easy to deploy, monitor, remote control, and optimize your IT infrastructure
through a single, simple management console. The Insight Control for Linux
suite installs and license software modules that are integrated into HP System
Insight Manager.
The HP Insight Control suite for Linux (IC-Linux) serves environments
requiring a Linux-based management consoles. See www.hp.com/go/ic-linux
DA - 13248
North America — Version 12 — November 25, 2009
Page 8
QuickSpecs
HP ProLiant DL180 Generation 6 (G6)
Standard Features
Insight Control server
deployment
HP Insight Control suites include one year of 24 x 7 HP Software Technical
Support and Update Service ensuring rapid access to HP support staff and
proactive delivery of software updates. For more information about this
service, please visit: http://www.hp.com/services/insight
HP Insight Control server deployment is a deployment solution for HP
ProLiant and Integrity servers hosted on a Windows CMS. It automates the
process of deploying and provisioning server software, enabling companies
to quickly and easily adapt to changing business demands. Insight Control
server deployment includes software optimizations for HP servers, including
the HP scripting toolkits, configuration jobs for leading industry-standard
operating systems, sample unattended files, and HP server support packs that
include software drivers, management agents, and important documentation.
Deploying servers can be accomplished either through imaging or through
scripting.
Insight Control server deployment is hosted on a Windows server and is
intended for heterogeneous environments deploying Windows, Linux,
VMware ESX and Microsoft Hyper-V systems.
Insight Control server deployment includes one year of 24 x 7 HP Software
Technical Support and Update Service ensuring rapid access to HP support
staff and proactive delivery of software updates. For more information about
this service, please visit: http://www.hp.com/services/insight.
Core Server Management ProLiant 100 Series G6
Core Management
Software
HP provides management solutions that are designed to simplify a server's
installation, configuration, and maintenance throughout the entire server
lifecycle. This provides the customers with higher levels of operational
efficiency and highly reliable systems.
While ProLiant 100 series G6 servers do not support the Insight Foundation
Suite for ProLiant, they support a key subset of this important suite software
tools and utilities which are very suitable for this class of server: SIM, SMH,
agents, providers, and a SmartStart 'like' deployment CD called Easy Set-up
which greatly simplifies server set-up. Additionally the DL100 and SL100 G6
models support the SmartStart Scripting Toolkit (SSSTK), an automated
scalable deployment utility.
Information on core management supported on ProLiant 100 series G6
servers can be found at these URLS:
Core Management: www.hp.com/go/coremanagement
HP Systems Insight
Manager
Insight Management
Agents
DA - 13248
HP ProLiant 100 series Easy Set-up CDs: www.hp.com/servers/easysetup
HP Systems Insight Manager (HP SIM) provides a unified, secure and
extensible standards-based environment to centrally manage servers, storage
and other infrastructure devices, (both HP and non-HP) across multiple
operating system platforms.
HP Insight Management Agents and Insight Management Providers
are available for HP Systems Insight Manager (SIM) Integration.
North America — Version 12 — November 25, 2009
Page 9
QuickSpecs
HP ProLiant DL180 Generation 6 (G6)
Standard Features
ProLiant 100-series G6 servers can use the same SNMP based Insight
Management Agents supported by other ProLiant servers. As a result,
administrators can use HP Systems Insight Manager (SIM) 5.3 and
greater to manage ProLiant 100-series G6 servers. Administrators can
also use any other SNMP- based management tool. These agents are
obtained as part of the ProLiant 100-series model-specific "Easy Setup" CDs, or through: www.hp.com/servers/easysetup
The following capabilities are enabled on the 100-series G6 servers
by the SNMP agents:
Health monitoring capabilities, including monitoring for drives, fans,
network, power supplies, and temperature
Alerting capabilities, including basic alert notification for Smart Array
drive pre-failure only
Performance monitoring capabilities providing information on
processor, memory, disk free space, network utilization
Easy Set-up CD
NOTE: For additional information, please see:
http://www.hp.com/go/insight
Easy Set-up CDs are available on all 100-series G6 servers and are also
available as an ISO image web download. HP ProLiant Easy Set-up CDs
provide easy, step-by-step, single and multi-server server utilities for the
ProLiant 100-series G6 servers to streamline server setup for 100-series G6
servers. The user experience is consistent with SmartStart and offers the
following capabilities:
Boot environment and GUI
Assisted Installation: Windows 2003 Server and Windows 2008 Server
drivers
Manual installation: Windows 2003 Server, Windows 2008 Server,
and Linux drivers (specific OS support varies by server. Refer to each
server's QuickSpecs for supported versions)
HP Insight Diagnostics
AutoRun
Array Configuration Utility (ACU) has been combined with Array
Diagnostics Utility (ADU) to offer both configuration of array
controllers and storage devices and testing of array controller
hardware
SmartStart Scripting Toolkit (SSSTK) and Smart Components for
software and drivers for DL100 and SL100 servers
SmartStart Scripting
Toolkit (SSSTK)
DA - 13248
NOTE: OS and SW available for Manual Installation are listed on each
servers' QuickSpecs.
The SmartStart Scripting Toolkit is a server deployment product that delivers
an unattended automated installation for high-volume server deployments.
The SmartStart Scripting Toolkit includes a set of utilities for configuring and
deploying servers in a customized, predictable, and unattended manner.
These utilities enable you to duplicate the configuration of a source server on
target servers with minimum user interaction.
North America — Version 12 — November 25, 2009
Page 10
QuickSpecs
HP ProLiant DL180 Generation 6 (G6)
Standard Features
The Toolkit is designed for IT experts with experience in scripting operating
system installations and configuring ProLiant server hardware.
Subscriber's Choice
ROMPaq, software and
latest drivers
NOTE: For additional information, please see:
http://h18004.www1.hp.com/products/servers/management/toolkit/
index.html
Subscriber's Choice Driver and Support Alerts/Notifications is a web-based
email subscription service that provides software and driver change
notifications for ProLiant products. Sign up at:
http://www.hp.com/go/subscriberschoice
and customize your profile to receive various new alerts as they become
available, on a weekly or monthly basis.
The latest software, drivers, and firmware fully optimized and tested for your
ProLiant server and options; downloaded from Software and Drivers
download pages website at: http://www.hp.com/go/support and from
www.hp.com/servers/easysetup. Contains the following:
HP Insight Management Agents for Systems Insight Manager (SIM)
Integration
HP Systems Management Homepage
Array Configuration Utility (ACU)
Array Diagnostics Utility (ADU)
HP Insight Diagnostics
Industry Standard
Compliance
ACPI V2.0 Compliant
PCI 2.2 Compliant
PXE Support
WOL Support
Microsoft® Logo certifications
IPMI 2.0 Compliant
Security
Power-on password
Setup password
Diskette boot control
Secure Sockets Layer (SSL)
Secure Shell (SSH)
DA - 13248
North America — Version 12 — November 25, 2009
Page 11
QuickSpecs
HP ProLiant DL180 Generation 6 (G6)
Standard Features
Security - Trusted Platform The TPM (Trusted Platform Module) is a microcontroller chip that can securely store artifacts used to
Module
authenticate the server platform. These artifacts can include passwords, certificates and encryption keys.
Windows® BitLocker™ Drive Encryption (BitLocker) is a data protection feature available in Windows
Server® 2008. BitLocker leverages the enhanced security capabilities of a Trusted Platform Module
(TPM) version 1.2. The TPM works with BitLocker to help protect user data and to ensure that a server
running Windows Server 2008 has not been tampered with while the system was offline.
NOTE: For more information about TPM, including a white paper, go to www.hp.com/go/TPM
NOTE: ProLiant OS pre-installed units will come with the partition required for TPM deployment.
NOTE: The TPM key is unique to every TPM deployed server and must be retained. Misplacing or losing
the key could result in data loss.
Server Power Cords
One 6' Highline (IEC-IEC) power cord ships standard
NOTE: HP ProLiant DL servers no longer ship standard with NEMA power cords (P/N 163719-002) that
allow connection to 110V US wall outlets in a home or office. ProLiant DL servers are primarily
connected to PDU's in data center racks so they now ship standard with only a PDU power cord
(416151-B21). If a user wishes to power a ProLiant DL server using a 110V receptacle (NEMA-15), the
NEMA power cord (P/N 227099-001) must be ordered separately.
If customers require a power cord, they can check the power cord matrix for the appropriate cord. Please
see the following power cord matrix: http://www.hp.com/go/powercordmatrix
NOTE: Rack models ship standard with an IEC cable.
UPS and PDU Power
Cord Matrix
Please see the UPS and PDU cable matrix's on the HP Power Protection and Management page. Under
Power Cords, click on the "HP Power Cord Matrix" link. That link will list cable descriptions, requirements,
and specifications for UPS and PDU units. Please see the following link:
www.hp.com/products/powercords.
Power Supply
HP has a new design for ProLiant power. The new Common Slot Power Supply bay. This design provides
the customer with commonality in power supplies across multiple platforms to save on the cost of spares
and allows HP to offer multiple power solutions to fit the customers' needs. Many HP ProLiant Servers
come with Common Slot, High Efficiency and Right-Size Power Supplies. Common Slot (CS) designates
commonality of the power supply across multiple ProLiant servers. HP's new Common Slot power
supplies are designed for highest efficiency to provide power efficiency without degrading performance
of the ProLiant. Power Supplies will have efficiency ratings up to 92%. There are three Right Size power
options available, depending on the configuration of your server. To make sure you select the correct
power supply to meet your configuration, we suggest that you use the HP Power Advisor to decide the
"Right-Size" for your configuration. All HP Common Slot power sources are UL, CE Mark Compliant, Hot
Plug and Redundant.
DA - 13248
North America — Version 12 — November 25, 2009
Page 12
QuickSpecs
HP ProLiant DL180 Generation 6 (G6)
Standard Features
Common Slot ProLiant
It is highly recommended that you use the HP Power Advisor in defining the "Right-Size" power supply for
your needs. HP offers Power Supply Options:
460Watts, Common Slot,92% Efficiency
750Watts, Common Slot, 92% Efficiency
HP's ProLiant Common Slot Power supplies (460W & 750W) meet multiple Energy Efficiency Initiatives.
Climate Savers Computing Initiative GOLD, ECOS Consulting 80PLUS GOLD and plans on offering
models that meet the Energy Star for Server requirements when they are published.
HP's ProLiant Common Slot Power supplies (1200W) meet multiple Energy Efficiency Initiatives. Climate
Savers Computing Initiative Bronze, ECOS Consulting 80PLUS Bronze Power Supply requirements.
Redundant Power: Optional (1+ 1 or n+n redundant) power supplies can be purchased through power
supply option kits.
System Fans
4 system fans ship standard; Non-hot plug, Non-redundant
NOTE: Redundant fan kit (P/N 516009-B21) available for purchase.
Operating Systems and
Virtualization Software
Support for ProLiant
Servers
Microsoft Windows Server
Microsoft Windows Server Hyper-V
Red Hat Enterprise Linux (RHEL)
SUSE Linux Enterprise Server (SLES)
Oracle Enterprise Linux (OEL)
Solaris 10 for x86/x64 based Systems
VMware ESX Server
Citrix Essentials for XenServer (Retail)
NOTE: For more information on HP's Certified and Supported ProLiant Servers for OS and Virtualization
Software and latest listing of software drivers available for your server, please visit our Support Matrix at:
http://www.hp.com/go/supportos and our driver download page
http://www.hp.com/support/DL180G6
DA - 13248
North America — Version 12 — November 25, 2009
Page 13
QuickSpecs
HP ProLiant DL180 Generation 6 (G6)
Standard Features
Rack Airflow
Requirements
Rack 10000 G2 series Cabinets
The increasing power of new high-performance processor technology requires increased cooling
efficiency for rack-mounted servers. The 10000 G2 Series Racks provide enhanced airflow for maximum
cooling, allowing these racks to be fully loaded with servers using the latest processors.
CAUTION: If a third-party rack is used, observe the following additional requirements to ensure
adequate airflow and to prevent damage to the equipment:
Front and rear doors: If your 42U server rack includes closing front and rear doors, you must allow 830
square inches (5,350 sq cm) of hole evenly distributed from top to bottom to permit adequate airflow
(equivalent to the required 64 percent open area for ventilation).
Side: The clearance between the installed rack component and the side panels of the rack must be a
minimum of 2.75 inches (7 cm).
CAUTION: Always use blanking panels to fill all remaining empty front panel U-spaces in the rack. This
arrangement ensures proper airflow. Using a rack without blanking panels results in improper cooling
that can lead to thermal damage.
Rack Kit
HP ProLiant DL180 rack models have fixed rails which provide support for racks with round mounting
holes and tool-free support for racks with square mounting holes (including Compaq/HP 7000, 9000,
10000 and HP series), with an adjustment range of 26" - 36".
Telco Rack Support
Support for all 2 and 4 post Telco racks and threaded hole racks requires an additional option kit from
Rack Solutions. The Rack Solutions brackets can be purchased at: www.hp.com/go/rackandpower.
Factory Express Portfolio
for Servers and Storage
HP Factory Express offers configuration, customization, integration and deployment services for HP
servers and storage products. Customers can choose how their factory solutions are built, tested,
integrated, shipped and deployed.
Factory Express offers service packages for simple configuration, racking, installation, complex
configuration and design services as well as individual factory services, such as image loading, asset
tagging, and custom packaging. HP products supported through Factory Express include a wide array of
servers and storage: HP Integrity, HP ProLiant, HP ProLiant Server Blades, HP BladeSystem, HP 9000
servers as well as the MSAxxxx, VA7xxx, EVA, XP, rackable tape libraries and configurable network
switches.
For more information on Factory Express services for your specific server model please contact your sales
representative or go to: http://www.hp.com/go/factory-express.
HP Enterprise
Configurator
The HP eConfigure Enterprise Configurator now provides factory default racking for our HP hardware
portfolio. This approach is aligned with our strategic direction to meet the needs and expectations of our
valued customers. If you require "custom" rack configuration, please contact HP's Customer Business
Center or an Authorized Partner for assistance.
DA - 13248
North America — Version 12 — November 25, 2009
Page 14
QuickSpecs
HP ProLiant DL180 Generation 6 (G6)
Standard Features
Service and Support
HP services provide total care and support expertise with committed response designed to meet your IT
and business needs.
HP Care Pack services include coverage for the HP branded hardware options qualified for the server,
purchased at the same time or afterward, internal to the enclosure, as well as 22" and smaller external
monitors and tower UPS options up to 3kVA; these items will be covered at the same service level and
for the same coverage period as the server. Coverage of UPS Battery is not included, standard warranty
terms & conditions apply. For servers or storage systems installed within a rack, service also covers all HP
qualified rack options installed within the same rack.
To fully capitalize on your HP ProLiant servers' capabilities requires a service partner who thoroughly
understands your server technology and systems environment. HP Services, an industry leader in
provision of multi vender support solutions provides a range of support services designed to meet the
varying needs of business. Whether an SMB or large global corporation HP has a ProLiant server support
offer to help you speedily deploy and maximize system uptime.
Recommended Service - Simplify ProLiant solution implementation, maintenance and management.
Support Service - 3-Year 24x7 4 hr Response service support coverage
Deployment Service - Hardware Installation
Enhanced Service - Optimize service level to increase IT performance and availability
Support Service - 3-Year 24x7 24 hr Call to repair service support coverage
SupportSupport - 3-Year 24x7 6 hr Call to repair service support coverage
Support Plus - 24x7 4 hr Response service support including OS coverage
Installation of a ProLiant server and Microsoft or Linux O/S per the Customer Description and/or Data
Sheet. To be delivered on a scheduled basis 8am-5pm, M-F, excl. HP holidays.
For a complete listing of service offerings and information visit:
http://www.hp.com/services/proliantservices
http://h20219.www2.hp.com/services/us/en/warranty/carepack-servers-proliant.html
DA - 13248
North America — Version 12 — November 25, 2009
Page 15
QuickSpecs
HP ProLiant DL180 Generation 6 (G6)
HPC Interconnects
NOTE: High Performance Computing (HPC) interconnect technologies are available for the DL180 G6 under the Cluster Platform
product portfolio. These high-speed interconnects are fully supported by HP when they are part of these configure to order clusters.
Solutions can be defined with a lot of flexibility with the help of configuration tools. Please visit the following URL to configure HPC
Clusters with InfiniBand, Gigabit Ethernet: http://www.hp.com/techservers/clusters/ucp/index.html
HPC Interconnects
InfiniBand
Gigabit Ethernet
DA - 13248
PCI-Express adapters
Use embedded ports or optional 10GbE NICs
North America — Version 12 — November 25, 2009
Page 16
QuickSpecs
HP ProLiant DL180 Generation 6 (G6)
Models
Four Drive Serial ATA (SATA) Models
NOTE: Upgrading from 4 Non-Hot Plug SATA hard drives to 4 Hot Plug SATA/SAS hard drives requires the addition of a storage
controller and one Internal mini-SAS cable (P/N 496013-B21).
NOTE: Upgrading to 8 Hot Plug SATA/SAS hard drives requires the addition of a HP 2U G6 8HDD LFF DL18X KIT (P/N 506924B21), storage controller (Smart Array P410/256MB recommended), and two Internal SATA/SAS cables (mini-SAS cable (P/N
496013-B21).
Intel® Xeon® Processor E5504 (2.00 GHz, 4MB L3 Cache, 80W, DDR3HP DL180G6 E5504
Processor
2x2GB 4LFF
One of the following
800)
487502-001
depending on model
Intel® Xeon® Processor L5520 (2.26 GHz, 8MB L3 Cache, 60W, DDR31066, HT, Turbo 1/1/2/2)
HP DL180G6 L5520
4MB shared L3 cache (E5504)
Cache Memory
2x2GB 4LFF
One of the following
8MB shared L3 cache (L5520)
487506-001
depending on model
4GB (2 x 2GB) PC3-10600E (UDIMM)
Memory
HP NC362i Integrated Dual Port Gigabit Server Adapter
Network Controller
Embedded SATA Raid Standard RAID 0,1,10
Storage Controller
1x 160GB Hot Plug SATA
Hard Drive
NOTE: Hot-plug functionality requires the addition of a Smart Array
controller.
4.0TB (4 x 1TB Hot Plug 3.5" SATA hard drives), Maximum
Internal Storage
4.0TB (4 x 1TB Hot Plug 3.5" SAS hard drives), Maximum
None ship standard
Optical Drive
460W common slot, high efficiency power supply
Power Supply
Rack (2U)
Form Factor
Eight Drive Serial ATA (SATA) Models
NOTE: Supports up to 8 Hot Plug SATA or SAS Hard Drives.
Processor
Intel® Xeon® Processor E5520 (2.26 GHz, 8MB L3 Cache, 80W, DDR3HP DL180G6 E5520
3x2GB 8LFF
1066, HT, Turbo 1/1/2/2)
487503-001
8MB shared L3 cache
Cache Memory
6GB (3 x 2GB) PC3-10600E (UDIMM)
Memory
HP NC362i Integrated Dual Port Gigabit Server Adapter
Network Controller
HP Smart Array P410 /256MB Controller (RAID 0/1/1+0/5/5+0)
Storage Controller
NOTE: A minimum of 256 MB cache, battery kit, and Smart Array Advanced
Pack License Key upgrade (P/N 516471-B21) is required to enable RAID 6,
6+0
None ship standard
Hard Drive
8.0TB (8 x 1TB Hot Plug 3.5" SATA hard drives), Maximum
Internal Storage
8.0TB (8 x 1TB Hot Plug 3.5" SAS hard drives), Maximum
None ship standard
Optical Drive
460W common slot, high efficiency power supply
Power Supply
Rack (2U)
Form Factor
DA - 13248
North America — Version 12 — November 25, 2009
Page 17
QuickSpecs
HP ProLiant DL180 Generation 6 (G6)
Models
Twelve Drive Serial ATA (SATA) Models
NOTE: Internal Storage expandable to 14 SAS/SATA drives with 2 Rear Drive Option Kit (P/N 488234-B21)
Processor
(2) Intel® Xeon® Processor E5540 (2.53 GHz, 8MB L3 Cache, 80W,
HP DL180G6 E5540
6x2GB 12LFF US
One of the following
DDR3-1066, HT, Turbo 1/1/2/2)
487507-001
depending on model
Intel® Xeon® Processor E5520 (2.26 GHz, 8MB L3 Cache, 80W, DDR31066, HT, Turbo 1/1/2/2)
HP DL180G6 E5520
8MB shared L3 cache
Cache Memory
3x2GB 12LFF
E5540: 12GB (6 x 2GB) PC3-10600R (RDIMM)
Memory
487508-001
One of the following
E5520: 6GB (3 x 2GB) PC3-10600E (UDIMM)
depending on model
HP NC362i Integrated Dual Port Gigabit Server Adapter
Network Controller
HP Smart Array P212 /256MB Controller (RAID 0/1/1+0/5/5+0)
Storage Controller
NOTE: The minimum of 256 MB cache, battery kit, and Smart Array
Advanced Pack License Key upgrade (P/N 516471-B21) is required to
enable RAID 6, 6+0
None ship standard (up to 12 Hot Plug SATA or SAS drives supported)
Hard Drive
12.0TB (12 x 1TB Hot Plug 3.5" SATA hard drives), Maximum
Internal Storage
12.0TB (12 x 1TB Hot Plug 3.5" SAS hard drives), Maximum
NOTE: Internal Storage expandable to 14 SAS/SATA drives with 2 Rear
Drive Option Kit (P/N 488234-B21)
None ship standard
Optical Drive
750W common slot, high efficiency power supply
Power Supply
Rack (2U)
Form Factor
DA - 13248
North America — Version 12 — November 25, 2009
Page 18
QuickSpecs
HP ProLiant DL180 Generation 6 (G6)
Smart Buys
The ProLiant Smart Buy program offers a collection of promotional server and option products that are configured with SMB in mind,
offered at discounted prices, and positioned for quick delivery. Smart Buy server offers are available for a limited time only.
(1) Intel® Xeon® processor E5504 (2.00GHz, 80W, DDR3-800)
S-BUY DL180G6 E5504 Processor(s)
2GB 8LFF
4MB Level 3 cache
Cache Memory
532074-005
HP 2GB UDIMM (1x2GB) 2Rx8 PC3-10600E-9 Kit
Memory
HP NC362i Integrated Dual Port Gigabit Server Adapter
Network Controller
HP Smart Array P410/256MB Controller (RAID 0/1/1+0/5/5+0)
Storage Controller
None included, supports up to 8LFF
Hard Drive
14.0TB (14 x 1TB Hot Plug 3.5" SATA hard drives), Maximum
Internal Storage
14.0TB (14 x 1TB Hot Plug 3.5" SAS hard drives), Maximum
Optical Drive
Power Supply
Form Factor
S-BUY DL180G6 E5520 Processor(s)
4GB 8LFF
Cache Memory
532075-005
Memory
Network Controller
Storage Controller
Hard Drive
Internal Storage
Optical Drive
Power Supply
Form Factor
S-BUY DL180G6 E5520 Processor(s)
4GB 12LFF
Cache Memory
532072-005
Memory
Network Controller
Storage Controller
Hard Drive
Internal Storage
Optical Drive
Power Supply
Form Factor
DA - 13248
HP Slim SATA DVD RW Drive
HP 750W CS HE Gold Power Supply
Rack (2U), (3.5 in./8.89cm)
(1) Intel® Xeon® processor E5520 (2.26GHz, 80W, DDR3-1066)
8MB Level 3 cache
4GB UDIMM (2x2) (2x HP 2GB 2Rx8 PC3-10600E-9 Kit)
HP NC362i Integrated Dual Port Gigabit Server Adapter
HP Smart Array P410/256MB Controller (RAID 0/1/1+0/5/5+0)
None included, supports up to 8LFF
14.0TB (14 x 1TB Hot Plug 3.5" SATA hard drives), Maximum
14.0TB (14 x 1TB Hot Plug 3.5" SAS hard drives), Maximum
HP Slim SATA DVD RW Drive
HP 750W CS HE Gold Power Supply
Rack (2U), (3.5 in./8.89cm)
(2) Intel® Xeon® processor E5520 (2.26GHz, 80W, DDR3-1066)
8MB Level 3 cache
4GB RDIMM (2x2)(2x HP 2GB 2Rx8 PC3-10600R-9 Kit)
HP NC362i Integrated Dual Port Gigabit Server Adapter
HP Smart Array P410/256MB Controller (RAID 0/1/1+0/5/5+0)
None included, supports up to 12LFF
14.0TB (14 x 1TB Hot Plug 3.5" SATA hard drives), Maximum
14.0TB (14 x 1TB Hot Plug 3.5" SAS hard drives), Maximum
HP Slim SATA DVD RW Drive
(2) HP 750W CS HE Gold Power Supply
Rack (2U), (3.5 in./8.89cm)
North America — Version 12 — November 25, 2009
Page 19
QuickSpecs
HP ProLiant DL180 Generation 6 (G6)
Smart Buys
S-BUY DL180G6 E5540 Processor(s)
8GB 8LFF
Cache Memory
532078-005
Memory
Network Controller
Storage Controller
Hard Drive
Internal Storage
Optical Drive
Power Supply
Form Factor
DA - 13248
(2) Intel® Xeon® processor E5540 (2.53GHz, 80W, DDR3-1066)
8MB Level 3 cache
8GB RDIMM (4x2) (2x HP 4GB 2Rx4 PC3-10600R-9)
HP NC362i Integrated Dual Port Gigabit Server Adapter
HP Smart Array P410/256MB Controller (RAID 0/1/1+0/5/5+0)
None included, supports up to 8LFF
14.0TB (14 x 1TB Hot Plug 3.5" SATA hard drives), Maximum
14.0TB (14 x 1TB Hot Plug 3.5" SAS hard drives), Maximum
HP Slim SATA DVD RW Drive
2x HP 750W CS HE Gold Power Supply
Rack (2U), (3.5 in./8.89cm)
North America — Version 12 — November 25, 2009
Page 20
QuickSpecs
HP ProLiant DL180 Generation 6 (G6)
Configuration Information - Factory Integrated Models
NOTE: This section lists some of the steps required to configure a Factory Integrated Model. To ensure only valid configurations are
ordered, HP recommends the use of an HP approved configurator. Contact your local sales representative for information on CTO
product offerings and requirements.
NOTE: HP does not allow factory integration of options into standard models listed above.
Configure-to-order servers must start with a CTO Chassis.
NOTE: FIO indicates that this option is a Factory Installable Option.
Step 1: Base Configuration (choose one of the following configurable models)
Hot Plug Models
HP ProLiant DL180 G6 Hot Plug SAS/SATA Rack CTO Chassis
Factory Integrated Model ships with:
HP NC362i Integrated Dual Port Gigabit Server Adapter
Three available PCI-Express slots:
Slot 1: x16 low-profile/half-height slot
Optional Slots 2, 3, & 4: 2x8 full-height/full length, 1x4 full-height/full length
(Recommended)
NOTE: Optional PCI-X option kit includes: Slot 1 and 2: full-length/full-height PCI-X
100. PCI-X slots are 64 bits; 133 MHz capable if only one PCI-X card is installed in
the server.
NOTE: Optional FL/FH option kit includes: Slot 1: full length/full height slot.
One HP SATA Embedded Cable Kit
One Highline IEC Power Cord
4 Non-Hot Plug Fans
Rack (2U), (3.5 in/8.89 cm)
Tool-less Fixed Rails
507168-B21
Step 2: Choose Required Options (only one of the following from each list unless otherwise
noted)
Processors
Quad-Core Processors
Intel® Xeon® processor L5520 (2.26 GHz, 8MB L3 Cache, 60W, DDR3-1066, HT,
Turbo 1/1/2/2), FIO Base
NOTE: If 2 processors are desired, select one 508344-L21 and one 508344-B21.
Intel® Xeon® processor E5540 (2.53 GHz, 8MB L3 Cache, 80W, DDR3-1066, HT,
Turbo 1/1/2/2), FIO Base
NOTE: If 2 processors are desired, select one 508343-L21 and one 508343-B21.
Intel® Xeon® processor E5520 (2.26 GHz, 8MB L3 Cache, 80W, DDR3-1066, HT,
Turbo 1/1/2/2), FIO Base
NOTE: If 2 processors are desired, select one 508342-L21 and one 508342-B21.
Intel® Xeon® processor E5504 (2.00 GHz, 4MB L3 Cache, 80W, DDR3-800), FIO
Base
NOTE: If 2 processors are desired, select one 508341-L21 and one 508341-B21.
DA - 13248
North America — Version 12 — November 25, 2009
508344-L21
508343-L21
508342-L21
508341-L21
Page 21
QuickSpecs
HP ProLiant DL180 Generation 6 (G6)
Configuration Information - Factory Integrated Models
Memory
Registered RDIMMs
HP 2GB 2Rx8 PC3-10600R-9 Kit
HP 4GB 2Rx4 PC3-10600R-9 Kit
HP 4GB 4Rx8 PC3-8500R-7 LP Kit
HP 8GB 2Rx4 PC3-8500R-7 Kit
HP 16GB 4Rx4 PC3-8500R-7 Kit
Unregistered with ECC UDIMMs
HP 1GB 1Rx8 PC3-10600E-9 Kit
HP 2GB 2Rx8 PC3-10600E-9 Kit
NOTE: All DDR3 memory option kits consist of one DIMM per kit. For detailed
memory configuration rules and guidelines, please use the Online DDR3 Memory
Configuration Tool: www.hp.com/go/ddr3memory-configurator.
NOTE: Kits described as LP include Low Power DIMMs. For more information on
ProLiant Energy Efficient Features, see:
http://h18004.www1.hp.com/products/servers/platforms/energyefficient/
NOTE: There is a maximum support limitation of 8 ranks per memory channel
(maximum of 2 quad rank DIMMs per channel)
500656-B21
500658-B21
500660-B21
516423-B21
500666-B21
500668-B21
500670-B21
Hard Drive Cage
HP 2U G6 4HDD CAGE Kit, FIO
HP 2U G6 8HDD CAGE Kit, FIO
HP 2U G6 12HDD CAGE Kit, FIO
HP 2U 8SFF HDD CAGE & BKPLN G6 FIO
HP 2U G6 25 SFF CAGE FIO Kit
HP 2U Rear 2-Bay LFF Hard Drive Kit
506926-B21
506927-B21
506928-B21
534958-B21
516011-B21
488234-B21
Power Supply
NOTE: Many HP ProLiant Servers now offer new power options, including Common
Slot Power Supplies. These power supplies come in multiple power ratings and higher
efficiency levels to offer the Right Size solution to fit your configuration. This provides
improved power delivery and the advantage of reclaiming lost power. Prior to making
a power supply selection it is "highly recommended" that the "HP Power Advisor" is run
to determine the right size power supply for your server configuration. The HP Power
Advisor is located at: www.hp.com/go/proliant-energy-efficient
HP 460W CS HE Power Supply Kit
HP 750W CS HE Power Supply Kit
CAUTION: Optional Power Supplies used for Redundancy "MUST" match the original
supplied power supply. Upgrades for more power headroom, when replacing the
original power supplies must match if purchased for redundancy. Option Kits contain
optional power supply, an IEC power cable and PDU IEC cables. In ProLiant Servers
that have more than one power slot (bay), same size power supplies are
recommended. If non-matched power supplies are inserted you will get errors and
operation will fail.
503296-B21
512327-B21
DA - 13248
North America — Version 12 — November 25, 2009
Page 22
QuickSpecs
HP ProLiant DL180 Generation 6 (G6)
Configuration Information - Factory Integrated Models
Step 3: Choose Additional Factory Integratable Options (only one from each list unless
otherwise noted)
Rear DVD Kit
Storage Controller
Power Supplies
HP DL180G6 Rear DVD Cage Kit
NOTE: The x16 low profile slot is not available when this option is configured.
HP P410/ZM FIO Smart Array Controller
HP Smart Array P411/256 MB w/ Battery FIO
HP Smart Array P410/256 MB w/ Battery FIO
HP Smart Array P212/256 MB w/ Battery FIO
HP 460W CS HE Power Supply Kit
HP 750W CS HE Power Supply Kit
515826-B21
462860-B21
491193-B21
491195-B21
491191-B21
503296-B21
512327-B21
CAUTION: Optional Power Supplies used for Redundancy "MUST" match the original
supplied power supply. Upgrades for more power headroom, when replacing the
original power supplies must match if purchased for redundancy. Option Kits contain
optional power supply, an IEC power cable and PDU IEC cables. In ProLiant Servers
that have more than one power slot (bay), same size power supplies are
recommended. If non-matched power supplies are inserted you will get errors and
operation will fail.
Step 4: Choose Additional Options for Factory Integration
NOTE: For additional options, please refer to the "Core Options" and "Additional Options" sections below.
DA - 13248
North America — Version 12 — November 25, 2009
Page 23
QuickSpecs
HP ProLiant DL180 Generation 6 (G6)
Core Options
NOTE: Some options may not be available for factory integration. Please contact an HP sales representative for additional
information.
HP DL180G6 Redundant Fan Kit
516009-B21
Unique Options
HP Dedicated Management Port Kit
516006-B21
HP Internal USB Cable G6 Kit
536769-B21
NOTE: This option required to connect a USB device internally.
HP DL180 G6 3PCI-E x8, Full Height Kit
577668-B21
NOTE: This option provides two x8 full-length/full-height slots as well as an additional
x8 (x4 electrically) slot. This allows the DL180G6 to have a maximum of four (4) slots.
HP PCI-X Full Riser DL180 G6 Kit
488230-B21
NOTE: This option kit replaces the three internal expansion slots listed in step 1 base
configuration.
NOTE: Optional PCI-X option kit includes: Slot 1: full-length/full-height PCI-X 100;
Slot 2: Full length/Full-height PCI-X 100. PCI-X slots are 64 bits; 133 MHz capable if
only one PCI-X card is installed in the server.
HP 2U G6 8HDD LFF DL18X KIT
506924-B21
NOTE: Upgrading to 8 Hot Plug SATA/SAS hard drives requires the addition of a
storage controller (Smart Array P410/256MB recommended), two Internal ATA/SAS
cables, (mini-SAS cable (496013-B21).
HP DL180G6 Rear 2LFF Kit
488234-B21
NOTE: Supports 12 hard drive server models only. Hard Drives not included.
NOTE: This option replaces the 2 Full Length, Full Height x8 PCIe slots.
HP KIT 2PCI-E x8, FH, DL180G6
497145-B21
NOTE: This option provides 2 Full Length, Full Height x8 PCIe slots.
HP KIT PCI-E x16, DL180G6
497143-B21
NOTE: This option replaces the 2 Full Length, Full Height x8 PCIe slots.
Processor
Quad-Core Processors
Intel® Xeon® Processor L5520 (2.26 GHz, 8MB L3 Cache, 60W, DDR3-1066, HT,
Turbo 1/1/2/2)
Intel® Xeon® Processor E5540 (2.53 GHz, 8MB L3 Cache, 80W, DDR3-1066, HT,
Turbo 1/1/2/2)
Intel® Xeon® Processor E5520 (2.26 GHz, 8MB L3 Cache, 80W, DDR3-1066, HT,
Turbo 1/1/2/2)
Intel® Xeon® Processor E5504 (2.00 GHz, 4MB L3 Cache, 80W, DDR3-800)
NOTE: HT indicates that the processor model supports Intel® Hyper-Threading
Technology.
NOTE: Turbo indicates the maximum potential frequency increment when using
Intel® Turbo Boost Technology, with 4, 3, 2, and 1 cores active.
NOTE: DDR3 speed is the maximum memory speed of the processor. Actual memory
speed may depend on the quantity and type of DIMMs installed.
NOTE: For the Intel 5500 Series, the letter preceding the model number indicates the
performance/wattage of the processor. "X" denotes High Performance/Wattage; "E"
denotes Enterprise Performance/Wattage (Mainstream); and "L" denotes Lower
Wattage.
DA - 13248
North America — Version 12 — November 25, 2009
508344-B21
508343-B21
508342-B21
508341-B21
Page 24
QuickSpecs
HP ProLiant DL180 Generation 6 (G6)
Core Options
Memory
Registered RDIMMs
HP 2GB 2Rx8 PC3-10600R-9 Kit
HP 4GB 2Rx4 PC3-10600R-9 Kit
HP 4GB 4Rx8 PC3-8500R-7 LP Kit
HP 8GB 2Rx4 PC3-8500R-7 Kit
HP 16GB 4Rx4 PC3-8500R-7 Kit
Unregistered with ECC UDIMMs
HP 1GB 1Rx8 PC3-10600E-9 Kit
HP 2GB 2Rx8 PC3-10600E-9 Kit
500656-B21
500658-B21
500660-B21
516423-B21
500666-B21
500668-B21
500670-B21
NOTE: All DDR3 memory option kits consist of one DIMM per kit. For detailed
memory configuration rules and guidelines, please use the Online DDR3 Memory
Configuration Tool: www.hp.com/go/ddr3memory-configurator
NOTE: Kits described as LP include Low Power DIMMs. For more information on
ProLiant Energy Efficient Features, see:
http://h18004.www1.hp.com/products/servers/platforms/energyefficient/
Optical Drives
HP Slim SATA DVD-ROM Optical Drive
HP Slim SATA DVDRW Optical Drive
NOTE: Optical drives can be installed in front, on 4 & 8 bay hard drive models.
NOTE: Optical drives can be installed in 12 and 25 drive model with the addition of
rear option kit (P/N 515826-B21).
Hard Drives
NOTE: The components of a storage subsystem (e.g. the drive, the HBA/controller,
and the server backplane) should operate at the same data transfer rate or the system
bandwidth will be negotiated down to an acceptable level for all components.
NOTE: Hard drives have either a one year or three year warranty; refer to the specific
hard drive QuickSpecs for details.
SAS Hot Plug SFF Enterprise (ENT) Drives
HP 300GB 6G SAS 10K SFF DP ENT HDD
HP 300GB 3G SAS 10K SFF DP ENT HDD
HP 146GB 6G SAS 15K SFF DP ENT HDD
HP 146GB 3G SAS 15K SFF DP ENT HDD
HP 146GB 6G SAS 10K SFF DP ENT HDD
HP 146GB 3G SAS 10K SFF DP ENT HDD
HP 72GB 6G SAS 15K SFF DP ENT HDD
HP 72GB 3G SAS 15K SFF DP ENT HDD
SAS Hot Plug 3.5" Enterprise (ENT) Drives
NOTE: 3G Hard Drives will operate at up to 3.0 Gb/s in 4 drive models that use the
embedded controller.
HP 600GB 6G SAS 15K 3.5" DP ENT HDD
HP 450GB 6G SAS 15K 3.5" DP ENT HDD
HP 450GB 3G 15K SAS 3.5" DP ENT HDD
DA - 13248
North America — Version 12 — November 25, 2009
481041-B21
481043-B21
507127-B21
492620-B21
512547-B21
504062-B21
507125-B21
418367-B21
512545-B21
418371-B21
516828-B21
516816-B21
454232-B21
Page 25
QuickSpecs
HP ProLiant DL180 Generation 6 (G6)
Core Options
HP 300GB 6G SAS 15K 3.5" DP ENT HDD
HP 300GB 3G SAS 15K 3.5" DP ENT HDD
HP 146GB 3G SAS 15K 3.5" DP ENT HDD
NOTE: Please see the QuickSpecs for Technical Specifications and additional
information:
http://h18000.www1.hp.com/products/quickspecs/12244_na/12244_na.html
NOTE: If selecting more than 4 hard drives or if using SAS hard drives, a Smart Array
controller and two SAS/SATA cables (P/N 464830-B21) are required.
SAS Hot Plug SFF Midline (MDL) Drives
HP 500GB 6G SAS 7.2K SFF DP MDL HDD
SAS Hot Plug 3.5" Midline (MDL) Drives
NOTE: 3G Hard Drives will operate at up to 3.0 Gb/s in 4 drive models that use the
embedded controller.
HP 1TB 3G SAS 7.2K 3.5" DP MDL HDD
HP 750GB 3G SAS 7.2K 3.5" DP MDL HDD
SATA Hot Plug SFF Midline (MDL) Drives
HP 500GB 3G SATA 7.2K 2.5in MDL HDD
HP 160GB 3G SATA 7.2K 2.5in MDL HDD
SATA Hot Plug 3.5" Midline (MDL) Drives
HP 1TB 3G SATA 7.2K 3.5" MDL HDD
HP 750GB 3G SATA 7.2K 3.5" MDL HDD
HP 500GB 3G SATA 7.2K 3.5" MDL HDD
HP 250GB 3G SATA 7.2K 3.5" MDL HDD
SATA Hot Plug 3.5" Entry (ETY) Drives
HP 160GB 3G SATA 7.2K 3.5" ETY HDD
NOTE: Please see the QuickSpecs for Technical Specifications and additional
specifications:
http://h18000.www1.hp.com/products/quickspecs/13021_na/13021_na.html
SATA Hot Plug Midline (MDL) Solid State Drives
HP 60GB 3G SATA 2.5in MDL 1y Wty SSD
HP 120GB 3G SATA 2.5in MDL 1y Wty SSD
SATA Hot Plug 3.5" Midline (MDL) Solid State Drives
HP 60GB 3G SATA 3.5in MDL 1y Wty SSD
HP 120GB 3G SATA 3.5in MDL 1y Wty SSD
NOTE: Please see the QuickSpecs for Technical Specifications and additional
information:
http://h18000.www1.hp.com/products/quickspecs/13415_na/13415_na.html
DA - 13248
North America — Version 12 — November 25, 2009
516814-B21
416127-B21
384854-B21
507610-B21
461137-B21
461135-B21
507750-B21
530888-B21
454146-B21
458930-B21
458928-B21
458926-B21
458945-B21
572071-B21
572073-B21
570761-B21
570763-B21
Page 26
QuickSpecs
HP ProLiant DL180 Generation 6 (G6)
Core Options
Communications
HP NC112T PCIe Gigabit Server Adapter
HP NC360T PCI Express Dual Port Gigabit Server Adapter
HP NC364T PCI Express Quad Port Gigabit Server Adapter
NOTE: Does not support Windows 2000.
HP NC373F PCI Express Multifunction Gigabit Server Adapter
HP NC373T PCI Express Multifunction Gigabit Server Adapter
HP NC375T PCI Express Quad Port Gigabit Server Adapter
HP NC382T PCI Express Dual Port Multifunction Gigabit Server Adapter
HP NC522SFP Dual Port 10GbE Server Adapter
NOTE: A minimum of two Gigabytes (2 GB) of server memory is required per each
NC522SFP adapter.
NOTE: Direct Attach Cable (DAC) for copper environments or fiber transceivers and
cables for fiber-optic environments must be purchased separately.
NOTE: Please see the QuickSpecs for Technical Specifications and additional
information: www.hp.com/go/ProLiantNICs.
DA - 13248
North America — Version 12 — November 25, 2009
503746-B21
412648-B21
435508-B21
394793-B21
394791-B21
538696-B21
458492-B21
468332-B21
Page 27
QuickSpecs
HP ProLiant DL180 Generation 6 (G6)
Additional Options
Remote Management
HP LO100i Advanced Pack, No Media 1-Server License including 1 year of 24x7
Technical Support and Updates
NOTE: For additional License Kits please see the Lights-Out 100i QuickSpecs at:
www.hp.com/go/lo100.
HP Insight Software
HP Insight Control for Linux
HP Insight Control for Linux, 1-server license, including one year of 24x7 Technical
Support and Updates, Electronic
HP Insight Control for Linux, No Media, 1-Server license, including one year of 24x7
Technical Support and Updates
HP Graphic Card Power
Adapter Kit
530521-B21
T9084BAE
464423-B22
HP Insight Control for Linux, Media pack (DVD) - No licenses included
NOTE: Media pack DVD contains HP Insight Control for Linux, HP Systems Insight
Manager, HP Insight Control power management, HP Insight Control virtual machine
management, and an integrated installer. Licenses must be acquired separately.
NOTE: Licenses ship without media. The Media Kit for Insight Control for Linux can be
ordered separately, or can be downloaded at: http://www.hp.com/go/ic-linux (click
on Download button).
NOTE: Electronic licenses can be used to purchase multiple licenses with a single
activation key, and are available in all countries except China and Japan. Customers
in China and Japan should order the physical equivalent.
NOTE: Customer will receive a license entitlement certificate, which must be
redeemed online or via fax in order to obtain the license activation key(s). Includes
one year of 24 x 7 HP Software Technical Support Service.
NOTE: For additional License Kits, including electronic licensing options, please see
the QuickSpecs at:
http://h18000.www1.hp.com/products/quickspecs/13019_na/13019_na.html
HP Insight Control server deployment
HP Insight Control server deployment Electronic License including 1 year 24x7
Technical Support and Updates
HP Insight Control server deployment 1-Server License including 1 year 24x7
Technical Support and Updates
NOTE: Licenses ship without media. The Insight Control Media Kit can be ordered
separately, or can be downloaded at: http://www.hp.com/go/insightupdates.
NOTE: Electronic licenses can be used to purchase multiple licenses with a single
activation key, and is available in all countries except China and Japan. Customers in
China and Japan should order the physical equivalent.
NOTE: Customer will receive a license entitlement certificate, which must be
redeemed online or via fax in order to obtain the license activation key(s). Includes
one year of 24 x 7 HP Software Technical Support Service.
NOTE: For additional license kits please see the Insight Control QuickSpecs at:
http://h18004.www1.hp.com/products/quickspecs/12631_na/12631_na.html
464422-B22
HP Graphic Card Power Adapter Kit
NOTE: The kit is applicable for 4LFF,8LFF and 8SFF cages . The Graphic Power
Adapter Kit can support up to 150 Watts.
533955-B21
DA - 13248
North America — Version 12 — November 25, 2009
T9082AAE
452151-B21
Page 28
QuickSpecs
HP ProLiant DL180 Generation 6 (G6)
Additional Options
Security
HP Trusted Platform Module Option Kit
Storage Controllers
SAS Controllers
HP Smart Array P800
HP Smart Array P800/512 BBWC Controller
HP Smart Array P212 Controller
HP P212/Zero Memory Smart Array Controller
HP P212/256MB Smart Array Controller
HP Smart Array P410 Controller
HP Smart Array P410/256MB Controller
HP Smart Array P410/512MB BBWC Controller
HP Smart Array P411 Controller
HP Smart Array P411/256MB Controller
HP Smart Array P411/512MB BBWC
Optional Upgrades
HP Int SAS/SATA Multi-Lane Cable Kit
HP Mini SAS to Mini SAS 28in Cable Assy
NOTE: Supports internal drives on the DL180 G6 with the Smart Array P800
Controller.
256 MB Cache Module
NOTE: Supported on HP Smart Array P212 Controller only.
512MB BBWC
NOTE: Supported on HP Smart Array P410 Controller and HP Smart Array P411
Controller only.
Battery Kit upgrade
NOTE: To enable BBWC on the 256MB cache.
NOTE: Supported on HP Smart Array P212 Controller, HP Smart Array P410
Controller, and HP Smart Array P411 Controller only.
HP Smart Array Advanced Pack No Media 1-Server license including 1yr 24x7
Technical Support
NOTE: This part number can be used to purchase a single license or to order multiple
licenses with a single activation key. Customers will receive a license entitlement
certificate via e-mail. The license entitlement certificate must be redeemed online or
via fax in order to obtain the license activation key(s). Include one year of 24x7 HP
Software Technical Support Services.
NOTE: Please see the QuickSpecs for Technical Specifications and additional
information:
http://h18000.www1.hp.com/products/quickspecs/12616_na/12616_na.html
(Smart Array P800 Controller)
http://h18000.www1.hp.com/products/quickspecs/13203_na/13203_na.html
(Smart Array P212 Controller)
http://h18000.www1.hp.com/products/quickspecs/13201_na/13201_na.html
(Smart Array P410 Controller)
http://h18000.www1.hp.com/products/quickspecs/13202_na/13202_na.html
(Smart Array P411 Controller)
DA - 13248
North America — Version 12 — November 25, 2009
488069-B21
381513-B21
462828-B21
462834-B21
462862-B21
462864-B21
462830-B21
462832-B21
464830-B21
496013-B21
462968-B21
462967-B21
462969-B21
516471-B21
Page 29
QuickSpecs
HP ProLiant DL180 Generation 6 (G6)
Additional Options
SAS HBA
HP SC08Ge Host Bus Adapter
NOTE: Please see the QuickSpecs for Technical Specifications and additional
information:
http://h18000.www1.hp.com/products/quickspecs/13082_na/13082_na.html
(SC08Ge HBA)
SCSI HBA
HP SC11Xe Host Bus Adapter
NOTE: Recommended HBA for SCSI tape drive connect.
NOTE: Please see the QuickSpecs for Technical Specifications and additional
information:
http://h18000.www1.hp.com/products/quickspecs/12566_na/12566_na.html
(SCSI HBA)
HPC Specific Options
HP IB 4X DDR Conn-X PCI-e G2 Dual Port HCA
HP IB 4X DDR PCI-e DUAL PORT HCA
HP IB 4X QDR PCI-e G2 Dual Port HCA
QLogic IB 4X QDR PCI-e G2 Dual-port HC
HP IB 4X QDR CX-2 PCI-e G2 Dual Port HCA
HP IB 4X DDR CX-2 PCI-e G2 Dual Port HCA
NOTE: Please see the QuickSpecs for additional information:
http://h18000.www1.hp.com/products/quickspecs/13078_na/13078_na.html
Tape Storage
NOTE: For the complete listing of Tape Drive offerings, please see:
http://www.hp.com/products1/storage/compatibility/tapebackup/ISS/index.html
Tape Drives
USB Rack-Mount Tape Solutions
HP StorageWorks 1U USB Rack-Mount Kit with one DAT 160 USB Tape Drive
NOTE: Pre-configured with one DAT 160 USB tape drive.
SAS Rack-Mount Tape Solutions
NOTE: HP recommends purchasing the HP Smart Array P212 (P/N 462828-B21) for
a dedicated SAS HBA for tape.
HP StorageWorks LTO-3 Ultrium 920 SAS Internal Tape Drive
NOTE: Mounts inside the 1U SAS Rack-Mount Kit (AE459A).
HP StorageWorks 1U SAS Rack-Mount Kit
NOTE: Supports up to (2) half-height SAS tape drives.
HP StorageWorks LTO-2 Ultrium 448 SAS Internal Tape Drive
NOTE: Mounts inside the 1U SAS Rack-Mount Kit (AE459A).
HP StorageWorks LTO-3 Ultrium 920 SAS Internal Tape Drive
NOTE: Mounts inside the 1U SAS Rack-Mount Kit (AE459A).
NOTE: Please see the QuickSpecs for Technical Specifications and additional
information:
http://h18000.www1.hp.com/products/quickspecs/10854_na/10854_na.html
(Worldwide)
DA - 13248
North America — Version 12 — November 25, 2009
488765-B21
412911-B21
483514-B21
448397-B21
517721-B21
583211-B21
592520-B21
592521-B21
AG703A
EH847A
AE459A
DW085A
EH847A
Page 30
QuickSpecs
HP ProLiant DL180 Generation 6 (G6)
Additional Options
For an up-to-date listing of the latest O/S and software support details for HP Ultrium
tape drives, please visit: http://www.hp.com/go/connect.
Tape Autoloaders
HP StorageWorks 1/8 G2 Tape Autoloader
HP StorageWorks 1/8 G2 LTO-4 Ultrium 1760 SAS Tape Autoloader
HP StorageWorks 1/8 G2 LTO-3 Ultrium 920 SAS Autoloader
NOTE: Requires the HP StorageWorks 1/8 G2 Tape Autoloader Rack Kit (AE166A).
HP StorageWorks 1/8 G2 Tape Autoloader Rack Kit
NOTE: Required to install the 1/8 G2 Autoloaders in a standard 19-inch rack;
includes rails and rackmount instructions.
NOTE: Please see the QuickSpecs for Technical Specifications and additional
information: http://www.hp.com/go/automation needed to create a complete
solution; reference current compatibility information at: http://www.hp.com/go/ebs.
Tape Libraries
HP StorageWorks MSL2024 Tape Library
HP StorageWorks MSL2024 1 LTO-4 Ultrium 1760 SAS Drive Library
HP StorageWorks MSL2024 1 LTO-3 Ultrium 920 SAS Drive Library
HP StorageWorks MSL4048 Tape Library
HP StorageWorks MSL4048 2 LTO-4 Ultrium 1760 SAS Drive Library
HP StorageWorks MSL4048 1 LTO-3 Ultrium 920 SAS Drive Library
NOTE: Please see the QuickSpecs for Technical Specifications and additional
information: http://www.hp.com/go/automation needed to create a complete
solution; reference current compatibility information at: http://www.hp.com/go/ebs.
Disk-Based Backup
RDX Removable Disk Backup
HP StorageWorks RDX500 External Removable Disk Backup System
NOTE: 500GB of Disk Storage.
NOTE: Please see the QuickSpecs for Technical Specifications and additional
information:
http://h18000.www1.hp.com/products/quickspecs/13036_na/13036_na.html
HP D2D Backup System
HP StorageWorks D2D2502i Backup System
NOTE: 2 TB raw capacity/1.5 TB useable capacity.
HP StorageWorks D2D2504i Backup System
NOTE: 4 TB raw capacity/3 TB useable capacity.
NOTE: Please see the QuickSpecs for Technical Specifications and additional
information: http://www.hp.com/go/d2d.
DA - 13248
North America — Version 12 — November 25, 2009
AK377A
AH558A
AK378A
AH559A
AK380A
AH560A
AJ935A
EJ001A
EJ002A
Page 31
QuickSpecs
HP ProLiant DL180 Generation 6 (G6)
Additional Options
StorageWorks Options
StorageWorks Fibre Channel HBA
NOTE: The following is a list of all Fibre Channel Host Bus Adapters for Windows and
Linux. For detailed compatibility information please see:
http://h18006.www1.hp.com/storage/saninfrastructure/hba.html.
Brocade Fibre Channel HBAs
HP 81B PCIe 8Gb FC Single Port HBA
HP 82B PCIe 8Gb FC Dual Port HBA
HP 41B PCIe 4Gb FC Single Port HBA
HP 42B PCIe 4Gb FC Dual Port HBA
Emulex Fibre Channel HBAs
HP StorageWorks 81E 8Gb SP PCI-e FC HBA
HP 82E 8Gb Dual-port PCI-e FC HBA
HP StorageWorks FC2142SR 4Gb PCI-e HBA
HP StorageWorks FC2242SR Dual Channel 4Gb PCI-e FC HBA
QLogic Fibre Channel HBAs
HP StorageWorks 81Q PCI-e FC HBA
HP 82Q 8Gb Dual Port PCI-e FC HBA
HP StorageWorks FC1142SR 4Gb PCI-e HBA
HP StorageWorks FC1242SR Dual Channel 4 Gb PCI-e HBA
StorageWorks SCSI HBA
HP U320e SCSI Host Bus Adapter
NOTE: Recommended for MSL SCSI Tape Library connect.
HP StorageWorks
Modular Smart Array
MSA SAN Storage Arrays
HP StorageWorks 50 Modular Smart Array
NOTE: Please see the QuickSpecs for Technical Specifications and additional
information:
http://h18000.www1.hp.com/products/quickspecs/12245_na/12245_na.html
HP StorageWorks MSA60 Array
NOTE: Please see the QuickSpecs for additional options and configuration
information at:
http://h18000.www1.hp.com/products/quickspecs/12627_na/12627_na.html
HP StorageWorks MSA70 Array
NOTE: Please see the QuickSpecs for additional options and configuration
information at:
http://h18000.www1.hp.com/products/quickspecs/12652_na/12652_na.html
DA - 13248
North America — Version 12 — November 25, 2009
AP769A
AP770A
AP767A
AP768A
AJ762A
AJ763A
A8002A
A8003A
AK344A
AJ764A
AE311A
AE312A
AH627A
364430-B21
418408-B21
418800-B21
Page 32
QuickSpecs
HP ProLiant DL180 Generation 6 (G6)
Additional Options
Uninterruptible Power
Systems
HP Rack Series
HP Rack Options
HP Tower UPS
HP Rack-mountable UPS
HP R1.5 VA 1U UPS
NOTE: Please see the QuickSpecs for Technical Specifications and additional
information:
http://h18000.www1.hp.com/products/quickspecs/12507_na/12507_na.html
NOTE: For additional information on sizing your server, please reference:
http://www.upssizer.com
NOTE: For additional information on HP Uninterruptible Power Systems please go to:
http://www.hp.com/servers/rackups
HP Rack 10000 G2 Series (Carbon/Graphite Metallic)
10642 G2 (42U) Rack Cabinet 1200mm Deep - Shock Pallet
10642 G2 (42U) Rack Cabinet 1200mm Deep - Pallet
10647 G2 (47U) Rack Cabinet 1200mm Deep - Shock Pallet
10647 G2 (47U) Rack Cabinet 1200mm Deep - Pallet
NOTE: It is mandatory to use a shock pallet when shipping racks with equipment
installed.
NOTE: Please see the Rack 10000 G2 QuickSpecs for Technical Specifications such
as height, width, depth, weight, and color:
http://h18000.www1.hp.com/products/quickspecs/12402_na/12402_na.html
NOTE: For additional information regarding Rack Cabinets, please see the following
URL: http://www.hp.com/go/rackandpower.
HP KVM Switch Options
2x1x16 IP Console Switch with Virtual Media
4x1x16 IP Console Switch with Virtual Media
2x16 Server Console Switch with Virtual Media
PS/2 Virtual Media Interface Adapter, 1 pack
NOTE: Requires PS/2 and one USB port on server.
PS/2 Interface Adapter, 1 pack
PS/2 Interface Adapter, 8 pack
HP 1x4 Console Switch
HP PS2 Server Console Cable, 6 foot, 2-Pack
HP USB Server Console Cable, 6 foot, 2-Pack
NOTE: required for supporting USB peripherals.
NOTE: Cat5e cables are required to connect Interface Adapters to Console Switches.
Cat5e cables can be found at the following URL: http://www.hp.com/go/kvm.
HP Serial Console Server Options
HP 16 Port Serial Console Server
HP 48 Port Serial Console Server
0x2x16 KVM Server Console G2 Switch with Virtual Media and CAC
0x2x32 KVM Server Console G2 Switch with Virtual Media and CAC
DA - 13248
North America — Version 12 — November 25, 2009
AF419A
AF034A
AF038A
AF044A
AF045A
AF601A
AF602A
AF600A
AF604A
262588-B21
262587-B21
AF611A
AF612A
AF613A
AF101A
AF102A
AF618A
AF619A
Page 33
QuickSpecs
HP ProLiant DL180 Generation 6 (G6)
Additional Options
1x1Ex8 KVM IP Console Switch G2 with Virtual Media and CAC
2x1Ex16 KVM IP Console Switch G2 with Virtual Media and CAC
4x1Ex32 KVM IP Console Switch G2 with Virtual Media and CAC
Serial Adapter, RJ45-DB9 DCE Female, 1 Pack
Serial Adapter, RJ45-DB9 DCE Female, 8 Pack
NOTE: Cat5e cables are required to connect Serial Adapters to Serial Console
Servers. Additional Serial Adapters and Cat5e cables can be found at the following
URL: http://www.hp.com/go/kvm.
NOTE: For additional information regarding KVM switches, Serial Console servers,
rack mount monitors, keyboards and all related options please see the following URL:
http://www.hp.com/go/kvm.
Rack Kits
HP Rack Cable Management Velcro Clips
USB Options
HP External USB CD/DVD R/RW Optical Drive
USB 1.44-MB External Diskette Drive
USB Floppy Drive
HP USB-PS/2 Mouse
HP Keyboard (USB) standard 2004
Service and Support
Offerings (HP Care Pack
Services)
Hardware Services 4-Hour On-site Service
13-Hour x 5-Day Coverage, 3 Years, Electronic
24-Hour x 7-Day Coverage, 3 Years, Electronic
Hardware Services Next Business Day On-Site Service
9-Hour x 5-Day Coverage, 3 Years, Electronic
Hardware Services 6-Hour Call to Repair On-Site Service
6-Hour Call to Repair, On-site Service, 7-Day x 24-Hour Coverage, 3 Years,
Electronic
Hardware Installation, Electronic
NOTE: For more information, customer/resellers can contact:
http://www.hp.com/services/carepack.
DA - 13248
North America — Version 12 — November 25, 2009
AF620A
AF621A
AF622A
AF103A
AF110A
379820-B21
FS943AA
DC141B
DC361B
DC369A
DT528A#ABA
UH271E
UH272E
UH270E
UH273E
UH301E
Page 34
QuickSpecs
HP ProLiant DL180 Generation 6 (G6)
Memory
NOTE: Memory configurations listed do not apply to "Factory Integrated Models".
HP ProLiant DL180 G6
Standard Memory (depending on model)
4 GB (2 x 2 GB) PC3-10600E Unbuffered memory, with Advanced ECC Capabilities Memory installed.
6 GB (3 x 2 GB) PC3-10600E Unbuffered memory, with Advanced ECC Capabilities Memory installed.
12 GB (6 x 2 GB) PC3-10600R Registered memory, with Advanced ECC Capabilities Memory installed.
Maximum Memory
Up to 192 GB memory is available with the optional installation of PC3-8500R Registered DIMM memory kits.
NOTE: Charts do not represent all possible memory configurations.
DDR3 memory population guidelines
For detailed memory configuration rules and guidelines, please use the Online DDR3 Memory Configuration Tool:
www.hp.com/go/ddr3memory-configurator
Some DIMM installation guidelines are summarized below:
For servers with twelve (12) memory slots
There are three (3) channels per processor; six (6) channels per server
There are two (2) DIMM slots for each memory channel; twelve (12) total slots
Memory channel 1 consists of the two (2) DIMMs that are closest to the processor
Memory channel 3 consists of the two (2) DIMMs that are furthest from the processor
DIMM slots that are white should be populated first
Do not mix Unbuffered memory (UDIMMs) with Registered memory (RDIMMs)
Do not install DIMMs if the corresponding processor is not installed
If only one processor is installed in a 2CPU system, only half of the DIMM slots are available
To maximize performance, balance the total memory capacity between all installed processors
It is not required, but it is recommended to load the channels similarly if possible
You can only have up to eight (8) ranks installed per channel
You can only install two quad-rank DIMMs per channel
You can install two UDIMMs per channel; if available, the third slot in the channel must remain empty
Populate DIMMs from heaviest load (quad-rank) to lightest load (single-rank) within a channel
Heaviest load (DIMM with most ranks) within a channel goes furthest from the chipset
No mixing DIMM voltage; all DIMMs must be the same voltage
DA - 13248
North America — Version 12 — November 25, 2009
Page 35
QuickSpecs
HP ProLiant DL180 Generation 6 (G6)
Memory
DIMM Type ->
Registered DIMMS (RDIMMs)
DIMM Rank ->
Dual Rank (2R)
Quad Rank (4R)
16 GB
4GB
Unbuffered with ECC
DIMMs (UDIMMs)
Single Rank Dual Rank
(1R)
(2R)
2GB
4GB
8GB
8GB
1GB
DIMM Capacity ->
DIMM Native Speed (MHz) ->
1333
1333
1066
1333
1066
1066
1333
SLOTS THAT CAN BE POPULATED
12 slot servers
12
12
12
12
12
12
12
MAXIMUM CAPACITY (GB)
12 slot servers
24
48
96
96
48
192
12
POPULATED DIMM SPEED (MHz)
1 DIMM Per Channel
1333
1333
1066
1333
1066
1066
1333
2 DIMM Per Channel
1066
1066
1066
1333*
800
800
1066
NOTE: *Supported with BIOS update via ROM Based Setup Utility (RBSU). UDIMM support is on 12-slot server.
NOTES:
2GB
1333
12
24
1333
1066
Mixing DIMM speeds is allowed, but the system processor speed rules always override the DIMM capabilities.
If you do mix DIMM speeds, the memory bus will default to the minimum clock rate of all DIMMs in the system - even if the
slower DIMM is on the other processor.
If you install 1x 1066MHz DIMM in channel 1 and 1x 1333MHz DIMM in channel 2, you still run at 1066MHz.
If you install 1x 1066MHz DIMM in channel 1 and 5x 1333MHz DIMMs with 1 DIMM Per Channel (DPC) in each of the other
channels, you run at 1066MHz.
If you install 3DPC in one channel (if applicable) and 1DPC in all other channels, you run at 800MHz.
95 Watt CPU's are required for 1333MHz DIMM speeds. All other CPU's are capable of up to 1066MHz.
References to the above MHz speeds are for the various speeds of DDR3 DIMMs; 1333 refers to DDR3-1333, etc.
DIMM slot and configuration diagrams
Basic memory slot & population diagram
Population order; start with "A" first, "B" second, "C" third, etc.
12 DIMM SLOTS (6 per CPU node)
Chnl 1
slot #
1
2
CPU1
population order
D
A
slot #
1
2
CPU2
population order
D
A
Chnl 1
Chnl 2
3
4
E
B
3
4
E
B
Chnl 2
Chnl 3
5
6
F
C
5
6
F
C
Chnl 3
Standard memory configuration (1 CPU model)
6GB, consisting of three (3) 2GB dual-rank PC3-10600 RDIMMs
DA - 13248
North America — Version 12 — November 25, 2009
Page 36
QuickSpecs
HP ProLiant DL180 Generation 6 (G6)
Memory
Chnl 1
slot #
1
2
CPU1
population order
D: empty
A: 2GB DIMM
slot #
1
2
CPU2
population order
D: empty
A: empty
Chnl 1
Chnl 2
3
4
E: empty
B: 2GB DIMM
3
4
E: empty
B: empty
Chnl 2
Chnl 3
5
6
F: empty
C: 2GB DIMM
5
6
F: empty
C: empty
Chnl 3
Standard memory plus optional memory (1 CPU model)
30GB, consisting of three (3) 2GB RDIMMs plus three (3) 8GB RDIMMs
3x 2GB dual-rank PC3-10600 RDIMMs
3x 8GB dual-rank PC3-8500 RDIMMs
Chnl 1
slot #
1
2
CPU1
population order
D: 8GB DIMM
A: 2GB DIMM
slot #
1
2
CPU2
population order
D: empty
A: empty
Chnl 1
Chnl 2
3
4
E: 8GB DIMM
B: 2GB DIMM
3
4
E: empty
B: empty
Chnl 2
Chnl 3
5
6
F: 8GB DIMM
C: 2GB DIMM
5
6
F: empty
C: empty
Chnl 3
Standard memory replaced with optional memory (1 CPU model)
RDIMM maximum configuration
96GB, consisting of six (6) 16GB quad-rank PC3-8500 RDIMMs
Chnl 1
slot #
1
2
CPU1
population order
D: 16GB DIMM
A: 16GB DIMM
slot #
1
2
CPU2
population order
D: empty
A: empty
Chnl 1
Chnl 2
3
4
E: 16GB DIMM
B: 16GB DIMM
3
4
E: empty
B: empty
Chnl 2
Chnl 3
5
6
I: 16GB DIMM
C: 16GB DIMM
5
6
I: empty
C: empty
Chnl 3
UDIMM maximum configuration (1 CPU model)
12GB, consisting of six (6) 2GB dual-rank PC3-10600 UDIMMs
DA - 13248
North America — Version 12 — November 25, 2009
Page 37
QuickSpecs
HP ProLiant DL180 Generation 6 (G6)
Memory
Chnl 1
slot #
1
2
CPU1
population order
D: 2GB DIMM
A: 2GB DIMM
slot #
1
2
CPU2
population order
D: empty
A: empty
Chnl 1
Chnl 2
3
4
E: 2GB DIMM
B: 2GB DIMM
3
4
E: empty
B: empty
Chnl 2
Chnl 3
5
6
F: 2GB DIMM
C: 2GB DIMM
5
6
F: empty
C: empty
Chnl 3
Standard memory replaced with optional memory (2 CPU model)
RDIMM maximum configuration
192GB, consisting of twelve (12) 16GB quad-rank PC3-8500 RDIMMs
Chnl 1
slot #
1
2
CPU1
population order
D: 16GB DIMM
A: 16GB DIMM
slot #
1
2
CPU2
population order
D: 16GB DIMM
A: 16GB DIMM
Chnl 1
Chnl 2
3
4
E: 16GB DIMM
B: 16GB DIMM
3
4
E: 16GB DIMM
B: 16GB DIMM
Chnl 2
Chnl 3
5
6
F: 16GB DIMM
C: 16GB DIMM
5
6
F: 16GB DIMM
C: 16GB DIMM
Chnl 3
UDIMM maximum configuration (2 CPU model)
24GB, consisting of twelve (12) 2GB dual-rank PC3-10600 UDIMMs
Chnl 1
slot #
1
2
CPU1
population order
D: 2GB DIMM
A: 2GB DIMM
slot #
1
2
CPU2
population order
D: 2GB DIMM
A: 2GB DIMM
Chnl 1
Chnl 2
3
4
E: 2GB DIMM
B: 2GB DIMM
3
4
E: 2GB DIMM
B: 2GB DIMM
Chnl 2
Chnl 3
5
6
F: 2GB DIMM
C: 2GB DIMM
5
6
F: 2GB DIMM
C: 2GB DIMM
Chnl 3
NOTE: Capacity references are rounded to the common Gigabyte values.
1GB = 1024MB
2GB = 2048MB
4GB = 4096MB
8GB = 8192MB
DA - 13248
North America — Version 12 — November 25, 2009
Page 38
QuickSpecs
HP ProLiant DL180 Generation 6 (G6)
Memory
16GB = 16384MB
For detailed memory configuration rules and guidelines, please use the Online DDR3 Memory Configuration Tool:
www.hp.com/go/ddr3memory-configurator
Memory
Registered RDIMMs
HP 2GB 2Rx8 PC3-10600R-9 Kit
HP 4GB 2Rx4 PC3-10600R-9 Kit
HP 4GB 4Rx8 PC3-8500R-7 LP Kit
HP 8GB 2Rx4 PC3-8500R-7 Kit
HP 16GB 4Rx4 PC3-8500R-7 Kit
Unregistered with ECC UDIMMs
HP 1GB 1Rx8 PC3-10600E-9 Kit
HP 2GB 2Rx8 PC3-10600E-9 Kit
NOTE: All DDR3 memory option kits consist of one DIMM per kit. For detailed
memory configuration rules and guidelines, please use the Online DDR3 Memory
Configuration Tool: www.hp.com/go/ddr3memory-configurator.
NOTE: Kits described as LP include Low Power DIMMs. For more information on
ProLiant Energy Efficient Features, see:
http://h18004.www1.hp.com/products/servers/platforms/energyefficient/
DA - 13248
North America — Version 12 — November 25, 2009
500656-B21
500658-B21
500660-B21
516423-B21
500666-B21
500668-B21
500670-B21
Page 39
QuickSpecs
HP ProLiant DL180 Generation 6 (G6)
Storage
8 Drive Cage with DVD-Drive bay
1-8
9
Eight 3.5" Hot Plug SAS/SATA Hard Drive Bays
DVD-ROM, DVD RW
12 Drive Cage
1-12 Twelve 3.5" Hot Plug SAS/SATA Hard Drive Bays
13-14 Two Rear 3.5" Hot Plus SAS/SATA Hard Drive Bays
Not
Shown
Drive Support
Removable Media
DVD-ROM
DVD RW
Quantity
Supported
Up to 1
Up to 1
Position
Supported
9
9
Controller
Integrated IDE (ATAPI) (optional)
Integrated IDE (ATAPI) (optional)
Hard Drives
NOTE: The components of a storage subsystem (e.g. the drive, the HBA/controller, and the server backplane) should operate at the
same data transfer rate or the system bandwidth will be negotiated down to an acceptable level for all components.
NOTE: Hard drives have either a one year or three year warranty; refer to the specific hard drive QuickSpecs for details.
SATA Hot Plug SFF Midline (MDL) Drives
Quantity
Position
Supported
Supported
Controller
500GB 3G SATA 7.2K
Up to 8 with 8
1-8
HP Smart Array P800/512 BBWC Controller
160GB 3G SATA 7.2K
drive cage
HP Smart Array P410/256 MB Controller
HP Smart Array P410/512 MB BBWC Controller
Up to 25 with 25
1-25
HP Smart Array P212/Zero Memory Controller
drive cage
HP Smart Array P212/256 MB Controller
NOTE: Smart Array P212 Controllers recommended.
HP Smart Array P410/256 MB Controller
HP Smart Array P410/512 MB BBWC Controller
SATA Hot Plug 3.5" Midline (MDL) Drives
Quantity
Position
Supported
Supported
Controller
1TB 3G SATA 7.2K
Up to 8 with 8
1-8
HP Smart Array P410/256 MB Controller
DA - 13248
North America — Version 12 — November 25, 2009
Page 40
QuickSpecs
HP ProLiant DL180 Generation 6 (G6)
Storage
750GB 3G SATA 7.2K
500GB 3G SATA 7.2K
250GB 3G SATA 7.2K
drive cage
Up to 14 with 12
drive cage +
Rear Drive Cage
SATA Hot Plug 3.5" Entry (ETY) Drives
Quantity
Supported
160GB 3G SATA 7.2K
Up to 8 with 8
drive cage
Up to 14 with 12
drive cage +
Rear Drive Cage
SATA Hot Plug SFF Midline (MDL) Drives
Quantity
Supported
60GB 3.0G SATA SSD
Up to 8 with 8
120GB 3.0G SATA SSD
drive cage
Up to 25 with 25
drive cage
1-14
Position
Supported
1-8
1-14
Position
Supported
1-8
1-25
SATA Hot Plug 3.5" Midline (MDL) Solid State Drives
Quantity
Position
Supported
Supported
60GB 3.0G SATA SSD
Up to 8 with 8
1-8
120GB 3.0G SATA SSD
drive cage
SAS Hot Plug SFF Midline (MDL) Drives
Quantity
Supported
500GB 6G SAS 7.2K
Up to 8 with 8
drive cage
Up to 25 with 25
drive cage
SAS Hot Plug 3.5" Midline (MDL) Drives
Quantity
Supported
1TB 3G SAS 7.2K
Up to 8 with 8
750GB 3G SAS 7.2K
drive cage
DA - 13248
Position
Supported
1-8
1-25
Position
Supported
1-8
HP Smart Array P410/512 MB BBWC Controller
HP Smart Array P212/Zero Memory Controller
HP Smart Array P212/256 MB Controller
NOTE: Smart Array P212 Controllers recommended.
HP Smart Array P410/256 MB Controller
HP Smart Array P410/512 MB BBWC Controller
Controller
HP Smart Array P410/256 MB Controller
HP Smart Array P410/512 MB BBWC Controller
HP Smart Array P212/Zero Memory Controller
HP Smart Array P212/256 MB Controller
HP Smart Array P410/256 MB Controller
HP Smart Array P410/512 MB BBWC Controller
Controller
HP Smart Array P410/256 MB Controller
HP Smart Array P410/512 MB BBWC Controller
HP Smart Array P212/Zero Memory Controller
HP Smart Array P212/256 MB Controller
HP Smart Array P410/256 MB Controller
HP Smart Array P410/512 MB BBWC Controller
Controller
HP Smart Array P410/256 MB Controller
HP Smart Array P410/512 MB BBWC Controller
HP Smart Array P212/Zero Memory Controller
HP Smart Array P212/256 MB Controller
Controller
HP Smart Array P410/256 MB Controller
HP Smart Array P410/512 MB BBWC Controller
HP Smart Array P212/Zero Memory Controller
HP Smart Array P212/256 MB Controller
HP Smart Array P410/256 MB Controller
HP Smart Array P410/512 MB BBWC Controller
Controller
HP Smart Array P410/256 MB Controller
HP Smart Array P410/512 MB BBWC Controller
North America — Version 12 — November 25, 2009
Page 41
QuickSpecs
HP ProLiant DL180 Generation 6 (G6)
Storage
Up to 14 with 12
drive cage +
Rear Drive Cage
SAS Hot Plug SFF Enterprise (ENT) Drives
Quantity
Supported
600GB 6G 15K
Up to 8 with 8
450GB 6G 15K
drive cage
450GB 3G SAS 15K
30GB 6G 15K
Up to 25 with 25
300GB 3G SAS 15K
drive cage
146GB 6G 15K
146GB 3G SAS 15K
72GB 6G 15K
72GB 3G SAS 15K
SAS Hot Plug 3.5" Enterprise (ENT) Drives
Quantity
Supported
600GB 6G SAS 15K DP
Up to 8 with 8
450GB 6G SAS 15K DP
drive cage
450GB 3G SAS 15K
Up to 14 with 12
300GB 3G SAS 15K
drive cage +
146GB 3G SAS 15K
Rear Drive Cage
72GB 3G SAS 15K
1-14
Position
Supported
1-8
1-25
Position
Supported
1-8
1-14
HP Smart Array P212/Zero Memory Controller
HP Smart Array P212/256 MB Controller
HP Smart Array P410/256 MB Controller
HP Smart Array P410/512 MB BBWC Controller
Controller
HP Smart Array P410/256 MB Controller
HP Smart Array P410/512 MB BBWC Controller
HP Smart Array P212/Zero Memory Controller
HP Smart Array P212/256 MB Controller
HP Smart Array P410/256 MB Controller
HP Smart Array P410/512 MB BBWC Controller
Controller
HP Smart Array P410/256 MB Controller
HP Smart Array P410/512 MB BBWC Controller
HP Smart Array P212/Zero Memory Controller
HP Smart Array P212/256 MB Controller
HP Smart Array P410/256 MB Controller
HP Smart Array P410/512 MB BBWC Controller
External Storage
50 Modular Smart Array
60 Modular Smart Array
70 Modular Smart Array
Quantity
Supported
Up to 4
Up to 4
Position
Supported
External
External
Up to 8
External
Up to 2
External
Up to 4
External
Controller
HP Smart Array P800/512 BBWC Controller
HP Smart Array P212/Zero Memory Controller
HP Smart Array P212/256 MB Controller
HP Smart Array P800/512 BBWC Controller
HP Smart Array P411/256 MB Controller
HP Smart Array P411/512 BBWC Controller
HP Smart Array P212 Zero Memory Controller
HP Smart Array P212/256 MB Controller
HP Smart Array P800/512 BBWC Controller
HP Smart Array P411/256 MB Controller
HP Smart Array P411/512 MB BBWC Controller
Tape and Disk-Based Backup
NOTE: For a complete listing of compatible tape and disk-based backup offerings, please visit: www.hp.com/go/connect.
Position
Supported
DA - 13248
Controller
North America — Version 12 — November 25, 2009
Controller Part
Number
Page 42
QuickSpecs
HP ProLiant DL180 Generation 6 (G6)
Storage
Tape Drives, Internal SCSI
LTO-1 Ultrium 232
LTO-2 Ultrium 448
LTO-3 Ultrium 920
LTO-3 Ultrium 960
LTO4 Ultrium 1760
LTO-4 Ultrium 1840
DAT 40
DAT 72
DAT 160
1U Rack-Mount Kit
3U Rack-Mount Kit
Rack Mount
HP SC11Xe Host Bus Adapter
Tape Drives, Internal USB
DAT 40 USB
DAT 72 USB
DAT 160 USB
DAT 320 USB
1U USB Rack-Mount Kit
Rack Mount
USB 2.0 Port
Tape Drives, Internal SAS
DAT 320 SAS
DAT 160 SAS
LTO-2 Ultrium 448 SAS
LTO-3 Ultrium 920 SAS
LT0-4 Ultrium 1760 SAS
LTO-4 Ultrium 1840 SAS
1U Rack-Mount Kit
3U Rack-Mount Kit
Rack Mount
HP Smart Array P212/Zero Memory Controller
462828-B21
Tape Automation,
External
SCSI
DAT 72x10 Autoloader
1/8 G2 Tape Autoloader
MSL2024
MSL4048
MSL 8096
Rack Mount
HP SC11Xe Host Bus Adapter
412911-B21
Tape Automation, Internal
SAS
1/8 G2 Autoloader
MSL2024
MSL4048
MSL 8096
Rack Mount
HP U320e SCSI Host Bus Adapter
NOTE: Recommended for MSL tape libraries.
DA - 13248
HP Smart Array P212/Zero Memory Controller
North America — Version 12 — November 25, 2009
412911-B21
N/A
AH627A
462828-B21
Page 43
QuickSpecs
HP ProLiant DL180 Generation 6 (G6)
Storage
Tape Automation Internal
Fibre Channel
MSL2024
MSL4048
Rack Mount
Please consult the EBS connectivity matrix at:
http://www.hp.com/go/ebs for detailed connectivity information.
N/A
RDX Removable Disk
Backup System, Internal
USB
RDX160
RDX320
RDX500
Rack Mount
USB 2.0 Port
N/A
D2D Backup Systems
network attach, iSCSI
D2D2500i
D2D4000i
Rack mount
Embedded Network Controller
N/A
DA - 13248
North America — Version 12 — November 25, 2009
Page 44
QuickSpecs
HP ProLiant DL180 Generation 6 (G6)
Power Specifications
HP 460W Power Supply
Part Number - AC 460W PSU
503296-B21
Input Voltage Range (Vrms)
100 to 240
Frequency Range (Nominal) (Hz) 50/60
Nominal Input Voltage (Vrms)
100
Maximum Rated Output Wattage
460
Nominal Input Current (A rms)
5.5
Max Rated Input Wattage Rating
526
(Watts)
Max. Rated VA (Volt-Amp)
548
Efficiency (%) at Max. Rated Output
87.5
Wattage
Power Factor
0.97
Leakage Current (mA)
0.42
Max. Inrush Current (A peak)
30
Max. Inrush Current duration (mS)
20
Maximum British Thermal Unit
1794
Rating (BTU-Hr)
HP 750W Power Supply
Part Number - AC 750W PSU
512327-B21
Input Voltage Range (Vrms)
100 to 240
Frequency Range (Nominal) (Hz) 50/60
Nominal Input Voltage (Vrms)
100
Maximum Rated Output Wattage
750
Nominal Input Current (A rms)
8.9
Max Rated Input Wattage Rating
857
(Watts)
Max. Rated VA (Volt-Amp)
894
Efficiency (%) at Max. Rated Output
87.5
Wattage
Power Factor
0.97
Leakage Current (mA)
0.42
Max. Inrush Current (A peak)
30
Max. Inrush Current duration (mS)
20
Maximum British Thermal Unit
2925
Rating (BTU-Hr)
120
460
4.5
520
208
460
2.6
505
200
460
2.5
505
220
460
2.4
503
230
460
2.3
503
240
460
2.2
503
542
88.5
527
91
527
91
524
91.5
524
91.5
524
91.5
0.97
0.50
30
20
1773
0.97
0.83
30
20
1725
0.97
0.87
30
20
1725
0.97
0.92
30
20
1715
0.97
0.96
30
20
1715
0.97
1.00
30
20
1715
120
750
7.4
847
208
750
4.3
824
200
750
4.1
825
220
750
3.9
820
230
750
3.7
820
240
750
3.6
820
884
88.5
859
91
859
91
854
91.5
854
91.5
854
91.5
0.97
0.50
30
20
2892
0.97
0.83
30
20
2812
0.97
0.87
30
20
2812
0.97
0.92
30
20
2797
0.97
0.96
30
20
2797
0.97
1.00
30
20
2797
Optional Power Cords and Jumper Cords
HP 2m 15A C20 C13 Universal Jumper Cord
DA - 13248
North America — Version 12 — November 25, 2009
AF590A
Page 45
QuickSpecs
HP ProLiant DL180 Generation 6 (G6)
Technical Specifications
System Unit
Dimensions (H x W x D)
(with bezel)
Weight
(approximate)
Input Requirements
(per power supply)
3.45" x 17.64" x 28.23" in (8.76 x 44.80 x 71.71 cm)
Maximum
(all hard drives, power
supplies, and processors
installed)
Minimum
(one hard drive, power
supply, and processor
installed)
Rated Line Voltage
Rated Input Current
45.0 lb (16.80 kg)
32.0 lb (11.94 kg)
90 -- 132 VAC,
180 - 264 V
460 Watt
750 Watt
7.1 A (at 120 VAC)
3.5 A (at 240 VAC)
7.4 A (at 120 VAC)
3.6 A (at 240 VAC)
Rated Input Frequency
Rated Input Power
Maximum
BTU Rating
Power Specifications
50 to 60 Hz
460 & 750 watt - 852 W
460 Watt
1773 BTU/hr (at 120
VAC)
1715 BTU/hr (at 240
VAC)
750 Watts
2892 BTU/hr (at 120
VAC)
2797 BTU/hr (at 240
VAC
To review typical system power ratings use the Power Advisor which is
available via the online tool located at URL: www.hp.com/go/proliantenergy-efficient
Click on the system of interest. Example: DL180 G6
Follow the instructions of the next screens.
Power Supply Output
Rated Steady-State Power 460 W (at 100 VAC)
(per power supply)
750 W (at 100 VAC)
460 W (at 200 VAC)
750 W (at 200 VAC)
460 W (at 100 VAC)
Maximum Peak Power
750 W (at 100 VAC)
460 W (at 200 VAC)
750 W (at 200 VAC)
System Inlet Temperature Operating
10° to 35°C (50° to 95°F) at sea level with an
altitude derating of 1.0°C per every 305 m
(1.8°F per every 1000 ft) above sea level to a
maximum of 3050 m (10,000 ft), no direct
sustained sunlight. Maximum rate of change is
10°C/hr (18°F/hr). The upper limit may be
limited by the type and number of options
DA - 13248
North America — Version 12 — November 25, 2009
Page 46
QuickSpecs
HP ProLiant DL180 Generation 6 (G6)
Technical Specifications
installed.
System performance may be reduced if operating
with a fan fault or above 30°C (86°F).
Non-operating
-30° to 60°C (-22° to 140°F). Maximum rate of
change is 20°C/hr (36°F/hr).
Operating
10 to 90% relative humidity (Rh), 28°C (82.4°F)
maximum wet bulb temperature, noncondensing.
Non-operating
5 to 95% relative humidity (Rh), 38.7°C
(101.7°F) maximum wet bulb temperature, noncondensing.
Operating
3050 m (10,000 ft). This value may be limited by
the type and number of options installed.
Maximum allowable altitude change rate is 457
m/min (1500 ft/min).
Non-operating
9144 m (30,000 ft). Maximum allowable
altitude change rate is 457 m/min (1500 ft/min).
Listed are the declared A-Weighted sound power levels (LWAd) and declared
average bystander position A-Weighted sound pressure levels (LpAm) when
the product is operating in a 23°C ambient environment. Noise emissions
were measured in accordance with ISO 7779 (ECMA 74) and declared in
accordance with ISO 9296 (ECMA 109).
Idle
LWAd
5.3 B
LpAm
38 dBA
Operating
LWAd
5.3 B
LpAm
38 dBA
Relative Humidity
(non-condensing)
Altitude
Acoustic Noise
NC362i Integrated Dual
Port Gigabit Server
Adapter
Network Interface
Data Transfer Method
Network Transfer Rate
Connector
Cable Support
DA - 13248
Integrated 10/100/1000BASE-T Transceiver
Combines a triple-speed IEEE 802.3TM - Compliant Media Access
Controller (MAC) with a triple-speed Ethernet transceiver.
Compliant to x1 PCIe Specification
10Base-T (Half-Duplex)
10 Mb/s
10Base-T (Full-Duplex)
20 Mb/s
100Base-TX (Half-Duplex) 100 Mb/s
100Base-TX (Full-Duplex) 200 Mb/s
1000Base-TX (Half and
2000 Mb/s
Full-Duplex)
RJ-45
Performs all the physical layer functions for 10BASE-T, 100BASE-T, and
1000BASE-T Ethernet on standard Category 5 UT
North America — Version 12 — November 25, 2009
Page 47
QuickSpecs
HP ProLiant DL180 Generation 6 (G6)
Technical Specifications
HP 160GB 3G SATA
7.2K 3.5" ETY HDD
458945-B21
160GB 7,200 rpm
Capacity
Height
Width
Depth
Interface
Transfer Rate (Maximum)
Native Command
Queuing
Seek Time
(typical reads, including
settling)
Physical Configuration
Operating Temperature
Smart Array P212
Controller
160,041MB
1.04 in (26.4 mm)
4.36 in (110.7 mm)
7.25 in (184.2 mm)
Serial ATA
3Gb/s
Supported
Single Track
Average
Full-Stroke
2.0 ms
<11 ms
23.0 ms
Rotational Speed
7,200 rpm
Bytes/Sector
512
Logical Blocks
312,581,808
41° to 131° F (5° to 55° C)
Disk Drive and Enclosure 3G SAS (Serial Attached SCSI)
Interface
1.5G SATA (Serial ATA)
1 internal/1 external (Mini-SAS) x8 wide port connectors
SAS Connectors
DDR-2/533 MHz with 40 or 72-bit wide bus provides up to 4.2 GB/s
Cache Memory Speed
maximum bandwidth.
x8 2.5G PCIe 2.0 provides 2GB/s maximum bandwidth.
Server Interface
x8 3G SAS provides 2.4GB/s maximum bandwidth.
SAS Speed
40-bit 256MB ECC protected cache; transportable with battery-backed
Cache Memory
upgrade.
NOTE: The 256MB cache is not battery-backed or transportable.
Logical Drives Supported Up to 32 logical volumes
Host Memory Addressing 64-bit, supporting greater than 4GB server memory space
RAID 6, 6+0 (Advanced Data Guarding)
RAID Support
NOTE: A minimum of 256 MB cache, battery kit, and Smart Array Advanced
Pack License Key upgrade is required to enable RAID 6, 6+0
RAID 5, 5+0 (Distributed Data Guarding)
NOTE: The 256 MB & Battery Kit upgrade is required to enable RAID 5,
5+0 support
RAID 1, 1+0 (Striping & Mirroring)
RAID 0 (Striping)
DA - 13248
North America — Version 12 — November 25, 2009
Page 48
QuickSpecs
HP ProLiant DL180 Generation 6 (G6)
Technical Specifications
Smart Array P410/410i
Controller
Environment-friendly
Products and Approach
Disk Drive and Enclosure 6Gb/s SAS (Serial Attached SCSI)
Interface
3Gb/s SATA (Serial ATA)
2 internal (Mini-SAS) x8 wide port connectors
SAS Connectors
DDR2-533MHz with 40 or 72-bit wide bus provides up to 4.2 GB/s
Cache Memory Speed
maximum bandwidth.
x8 2.5G PCIe 2.0 provides 2GB/s maximum bandwidth
Server Interface
x8 6Gb/s SAS provides 24.8GB/s maximum bandwidth
SAS Speed
40-bit 256MB ECC protected cache (72-bit 512MB BBWC module
Cache Memory
upgrades available); transportable with battery-backed upgrade
Logical Drives Supported Up to 64 logical drives
Host Memory Addressing 64-bit, supporting greater than 4GB server memory space
RAID Support
RAID 6, 6+0 (Advanced Data Guarding)
NOTE: The minimum of 256 MB cache, battery kit, and Smart Array
Advanced Pack License Key upgrade is required to enable RAID 6, 6+0
RAID 5, 5+0 (Distributed Data Guarding)
NOTE: The 256 MB is required to enable RAID 5, 5+0 support of the Smart
Array P410i
RAID 1+0 (Striping & Mirroring)
RAID 0 (Striping)
End-of-life Management
and Recycling
Hewlett-Packard offers end-of-life HP product return, trade-in, and recycling
programs in many geographic areas. For trade-in information, please go to:
http://www.hp.com/go/green. To recycle your product, please go to:
http://www.hp.com/go/green or contact your nearest HP sales office.
Products returned to HP will be recycled, recovered or disposed of in a
responsible manner.
The EU WEEE directive (2002/95/EC) requires manufacturers to provide
treatment information for each product type for use by treatment facilities.
This information (product disassembly instructions) is posted on the Hewlett
Packard web site at: http://www.hp.com/go/green. These instructions may
be used by recyclers and other WEEE treatment facilities as well as HP OEM
customers who integrate and re-sell HP equipment.
© Copyright 2009 Hewlett-Packard Development Company, L.P.
The information contained herein is subject to change without notice.
Microsoft and Windows NT are US registered trademarks of Microsoft Corporation.
Intel, the Intel logo, Xeon and Xeon Inside are trademarks of Intel Corporation in the U.S. and other countries.
The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and
services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial
errors or omissions contained herein.
For hard drives, 1GB = 1 billion bytes. Actual formatted capacity is less.
DA - 13248
North America — Version 12 — November 25, 2009
Page 49
Download PDF

advertising