Road Angel Plus USB Driver Installation Instructions
Click on the Start button, select Settings and then Control Panel
Double click on ‘System’
Select ‘Hardware’ and click on ‘Device Manager’
The following window will appear. You will see a USB Device entry with a yellow warning symbol either
listed under Universal Serial Bus controllers or, as in this case, under Other devices.
Double click on the USB Device entry.
The following window will appear. Click on ‘Reinstall Driver’
Click Next
Select ‘Install from a list….’ and then click ‘Next’
Select Search for a suitable driver for my device. Then click Next.
Ensure that the only option selected is ‘Specify a location’ click next
Then click Browse
Click on My Computer, and then click on Local Disk (C:)
then click on Program Files
Click on Blackspot Interactive
Click on RoadAngel Plus
Click on USB Drivers and then select RA_PLUS. Then click Open
Then click OK
The PC will then search for the driver and install it automatically.
When the installation is complete the following window will appear. Click ‘Finish’ to close the window.
You can now update your Road Angel Plus
Locate the Road Angel Plus icon on your main desktop.
Double click on the Road Angel Plus icon and the following window will appear. Ensure the
Road Angel is connected to the PC via the USB port and is switched on. The screen
will not be backlit and will say Connected to PC.
Establish an internet connection, click on ‘Synchronise’ and the software will start to update
the Road Angel Plus.
The blue bar will indicate the progress up the update.
Angel is up to date.
When it reaches 100% the Road
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF