Miller Electric | 456 CV | PDF – Miller XMT Series Welder

XMT Series
Issued June 2004 • Index No. DC/18.8
®
Quick
Specs
Multiprocess Welding
Power Source
Heavy Industrial Applications
Processes
Construction
Shipbuilding
Railroad
Truck/Trailer Manufacturing
Fabrication
Repair Shops
Rental Fleets
MIG (GMAW)/Pulsed MIG (GMAW-P)*
Stick (SMAW)
TIG (GTAW)/Pulsed TIG (GTAW-P)*
Flux Cored (FCAW)
Air Carbon Arc Cutting and Gouging
(CAC-A)
Input Power
304/350: Requires 3- or 1-Phase Power
456: Requires 3-Phase Power
Output Power
304: 10 – 35 V, 5 – 400 A
350: 10 – 38 V, 5 – 425 A
456: 10 – 38 V, 5 – 600 A
Weight
*With optional controls only —
not available with XMT 350 VS model.
304: Net: 79.5 lb (36.1 kg) Ship: 88.6 lb (40.2 kg)
350: Net: 80 lb (36.3 kg) Ship: 89.1 lb (40.4 kg)
456: Net: 118 lb (53.5 kg) Ship: 129 lb (58.5 kg)
The Power of Blue .
®
XMT 456 CC/CV
with Manual Link
XMT 304
CC/CV with
Auto-Link®
XMT 350 CC/CV with
Wind Tunnel Technology™ protects electrical
components and PC boards from contamination.
Fan-On-Demand™ cooling system operates only
when needed, reducing noise, energy use and the
amount of contaminants pulled through machine.
Lift-Arc™ allows TIG starting without the use of
high-frequency. Starts the arc without contaminating
the weld with tungsten.
Adaptive Hot Start™ increases the output amperage
at the start of a weld if necessary, eliminating
electrode sticking.
Lightweight, aerospace-grade aluminum case
offers protection with the benefit of reduced weight.
Inverter arc control technology provides greater
puddle control for superior 6010 Stick electrode
performance.
NEW! XMT 350 provides more welding
output with superior electrical efficiency
and an amazing .95 power factor!
See page 3 for details and additional
features of the XMT 350.
Please see:
page 2 for additional XMT 304 features.
page 4 for additional XMT 456 features.
115 VAC auxiliary power provides 10 amps of
circuit-breaker-protected power for water
circulators, etc. Standard on XMT 456, optional on
XMT 304 and XMT 350 CC/CV models only.
Line voltage compensation keeps power constant
even if power input varies by ±10%.
Process selector switch reduces the number of
control setup combinations without reducing
any features.
Large, dual digital meters are easy to view and are
presettable to ease setting weld output.
Pulsed MIG capabilities with optional Optima
control reduces spatter and distortion, allows better
out-of-position puddle control, and provides
potential reduction of fume particle emission.
Power source is warranted for 3 years, parts and labor.
Original main power rectified parts are warranted for 5 years.
Miller Electric Mfg. Co.
International Headquarters
Web Site
An Illinois Tool Works Company
1635 West Spencer Street
Appleton, WI 54914 USA
Phone: 920-735-4505
USA FAX: 920-735-4134
Canadian FAX: 920-735-4169
International FAX: 920-735-4125
www.MillerWelds.com
XMT 304 CC/CV Specifications
®
(Subject to change without notice.)
Input
Power
Rated Output
at 60%
Duty Cycle
Voltage
Range in
CV Mode
Amperage
Range in
CC Mode
Max. OpenCircuit
Voltage
Amps Input at Rated Load Output, 60 Hz,
208 V 230 V 400 V 460 V 575 V KVA KW
ThreePhase
300 A at
32 VDC
10 – 35 V
5 – 400 A
90 VDC
33.7
30.5
17
18.9
15.2
12.2 11.6
SinglePhase
225 A at
29 VDC
10 – 35 V
5 – 400 A
90 VDC
52.4
47.4
—
24.5
—
11.3 7.6
Dimensions
Weight
H: 17 in
(432 mm)
W: 12-1/2 in
(318 mm)
D: 24 in
(610 mm)
79.5 lb
(36.1 kg)
Certified to both the Canadian and U.S. Standards for welding equipment.
XMT 304 CC/CV Control Panel
®
5
1
6
2
Additional Features
Auto-Link® circuit automatically links the
power source to primary voltage being
applied (230/460 or 460/575 VAC, single- or
three-phase).
3
7
4
Ultra-tough, polycarbonate-blended cover
for control panel protects front controls
from damage.
1. Voltmeter
2. Power On/Off Switch
3. Inductance/Dig Control
4. Process Selector Switch (Rotary Switch)
5. Ammeter
6. Voltage/Amperage Adjustment Control
7. Voltage/Amperage Control Switch
International-style weld disconnects
provide high-quality weld cable connections.
(Two connectors supplied with each unit.)
XMT 304 CC/CV Performance Data
®
CC VOLT/AMP CURVE
DUTY CYCLE CHART
500
CV VOLT/AMP CURVE
100
100
250
225
200
SMAW-MAX
230 VAC 1-PHASE OPERATION
150
100
GTAW-MAX
40
GTAW-MIN
SMAW-MIN
0%
20
10
15
20
25 30
40
DUTY CYCLE
2
60
50 60 70 80 90 100
VOLTS
300
80
80
3-PHASE AND
460 VAC 1-PHASE OPERATION
VOLTS
WELDING AMPERES
400
0
0
100
25%
60
MAX
40
20
50%
75%
200
100%
300
AMPS
400
500
0
MIN
0
100
200
300
AMPS
400
500
XMT 350 Specifications
®
(Subject to change without notice.)
Input
Power
Rated Output
at 60%
Duty Cycle
Voltage
Range in
CV Mode
Amperage
Range in
CC Mode
Max. OpenCircuit
Voltage
Amps Input at Rated Load Output, 60 Hz,
208 V 230 V 400 V 460 V 575 V KVA KW
ThreePhase
350 A at
34 VDC
10 – 38 V
5 – 425 A
75 VDC
40.4
36.1
20.6
17.8
14.1
14.2 13.6
SinglePhase
300 A at
32 VDC
10 – 38 V
5 – 425 A
75 VDC
60.8
54.6
29.7
24.5
19.9
11.7 11.2
Dimensions
Weight
H: 17 in (432 mm)
W: 12-1/2 in (318 mm)
D: 24 in (610 mm)
CC/CV Model
80 lb (36.3 kg)
VS Model
80 lb (36.3 kg)
Certified to both the Canadian and U.S. Standards for welding equipment.
XMT 350 CC/CV and VS Control Panels
®
XMT 350 CC/CV Model
Additional Features
4
Manufactured Under the
Following US Patents:
5,601,741 5,642,260 5,902,150
6,002,103 6,115,273 6,193,548
6,239,407 6,266,257 6,625,046
6,611,189 6,426,888
Other Patents Pending
Available in CC/CV and VS
models. Both models feature
true CC/CV welding
processes, but VS model
does not include remote
control receptacle.
1
Power factor of .95 enables
smaller fuses/breakers and
primary wiring. Primary
amperage draw at rated
output is 25% less than the
competition.
5
NOTE:
CC/CV model
is equipped
with Dinsestyle output
connector.
Auto Remote Sense enables
unit to automatically use
remote control if connected
to remote control receptacle
(CC/CV models only).
Low OCV Stick — A built-in,
selectable feature, that
reduces the Stick mode
open-circuit voltage (OCV)
to nearly 15 volts when the
welding power source is not
™
Auto-Line Power Management
in use. Eliminates the need
Technology allows for any input
for add-on voltage reducers.
voltage hook-up (208 – 575 V)
with no manual linking required, Ultra-tough, polycarbonateproviding convenience in any blended cover for control
job setting. Ideal solution for panel protects front controls
dirty or unreliable input power. from damage.
CC
6
2
3
XMT 350 VS Model
4
Manufactured Under the
Following US Patents:
5,601,741 5,642,260 5,902,150
6,002,103 6,115,273 6,193,548
6,239,407 6,266,257 6,625,046
6,611,189 6,426,888
Other Patents Pending
1
5
3
6
NOTE:
VS model
is equipped
with Twecostyle output
connector.
Exceptional electrical
efficiency. At 400 A,
efficiency is 87.24%!
International-style weld
disconnects provide
high-quality weld cable
connections. (Two
350 A of welding output at
connectors supplied with
60% duty cycle with superior
CC/CV unit.)
low-end performance.
Optional gas solenoid for
TIG welding.
1. Voltmeter
2. Remote Control Receptacle
(CC/CV model only)
3. Process Selector Switch
(Rotary Switch)
4. Ammeter
5. Voltage/Amperage
Adjustment Control
6. Arc Control
XMT 350 Performance Data
®
6 AWG POWER CORD
200
8 AWG POWER CORD
150
100
100
90
90
80
80
70
70
60
50
40
30
20
GTAW
MIN
10
100
10
15
20
25 30
40
DUTY CYCLE
50 60 70 80 90 100
0
GTAW
MAX
SMAW
MAX
SMAW
80A
0%
25%
ARC
CONTROL
50
40
MAX
20
200
MIN
10
75%
100%
100
60
30
50%
0
VOLTAGE
250
1-PHASE OPERATION
VOLTAGE
WELDING AMPERES
3-PHASE OPERATION
300
CV VOLT/AMP CURVE
CC VOLT/AMP CURVE
DUTY CYCLE CHART
500
425
400
350
300
AMPS
400
500
0
0
100
200
300
400
500
AMPS
3
XMT 456 CC/CV Specifications
®
Input
Power
Rated Output
ThreePhase
450 A at 38 VDC,
100% Duty Cycle
(Subject to change without notice.)
Voltage
Range in
CV Mode
Amperage
Range in
CC Mode
Max. OpenCircuit
Voltage
Amps Input at Rated Load Output, 60 Hz
230 V 400 V 460 V 575 V KVA KW
10 – 38 V
5 – 600 A
95 VDC
50.8
31
27.8
24.4
21.2 19.2
565 A at 43 VDC,
60% Duty Cycle
Dimensions
Weight
H: 17 in (432 mm)
W: 14-1/2 in (368 mm)
D: 26 in (660 mm)
118 lb
(53.5 kg)
Certified to both the Canadian and U.S. Standards for welding equipment.
XMT 456 CC/CV Control Panel
®
Additional Features
1
Primary voltage display shows what primary
voltage the power source is linked for without
removing the side panels. Saves time and
assures you that the power source has been
correctly linked for available input voltage.
2
4
5
6
3
Unique case design helps protect internal
components from dirt and dust. To connect
input power cord and/or set unit up for correct
input power, remove the easy-to-handle panel
(1/3 case). The remaining two-thirds of the
case never needs to be removed!
7
Note: XMT 456 is equipped with Stud for ring-lug output connections.
1. Voltmeter
2. Power On/Off Switch
3. Arc Control
4. Ammeter
5. Voltage/Amperage Adjustment Control
6. Voltage/Amperage Control Switch
7. Process Selector Switch (Rotary Switch)
Optional remote on/off provides ability to turn
power source on or off when it is located away
from your work.
XMT 456 CC/CV Performance Data
®
DUTY CYCLE CHART
600
500
WELD AMPS
300
80
VOLTAGE
3-PHASE
OPERATION
400
CV VOLT/AMP CURVES
100
60
40
MAX.
200
20
MIN.
150
0
100
0
10
0
100
200
300
400
15
20
25
30
40
50
60
70 80 90 100
% DUTY CYCLE
600
700
600
700
CC VOLT/AMP CURVES
100
SMAW-MAX
Volt/amp curves show
minimum and maximum
voltage and amperage
output capabilities of unit.
Curves of other settings fall
between curves shown.
VOLTAGE
80
60
GTAW-MAX
40
SMAW
GTAW 0%
25%
MIN
50%
20
0
0
100
75%
200
100%
300
400
AMPERAGE
4
500
AMPERAGE
500
XMT MIGRunner Components
®
™
XMT ® 304 MIGRunner™ #907 061
XMT ® 350 CC/CV MIGRunner™ #907 233
Comes Complete With:
XMT 304 or 350 CC/CV power source
22A wire feeder
Roughneck™ C-4015 gun
Consumables
.035 and .045 in drive roll kit
Regulator/flow gauge with gas hose
MIGRunner Cart with cylinder rack
Bottom tray will hold optional Coolmate 3
(sold separately)
XMT 350 Python MIGRunner Components
®
®
™
XMT ® 350 CC/CV Python® MIGRunner™ #907 235
Comes Complete With:
XMT 350 CC/CV power source
XR Control
25 ft (7.6 m) Python® gun (air-cooled)
Consumables (.035 and 3/64 in contact tips)
Regulator/flow gauge with gas hose
MIGRunner Cart with cylinder rack
Bottom tray will hold optional Coolmate 3
(sold separately)
Python® is a registered trademark of MK Products, Irvine, CA USA
XMT 350 XR -Edge MIGRunner Components
®
™
™
XMT® 350 CC/CV XR™-Edge MIGRunner™
#907 234
XMT® 350 CC/CV XR™-Edge
PULSERunner™ #951 033
Comes Complete With:
XMT 350 CC/CV power source
XR-Control
30 ft (9 m) XR-A Edge gun (air-cooled)
Consumables
.035 and .047 in drive roll kit
Regulator/flow gauge with gas hose
MIGRunner Cart with cylinder rack
Bottom tray will hold optional Coolmate 3
(sold separately)
Optima Pulse control
(PULSERunner #951 033 only)
Optima™ Pulse Control
(comes with
PULSERunner #951 033)
5
Genuine Miller Accessories
Optima™ #043 389
A multipurpose,
microprocessor-based
pulse control for both
synergic MIG (wire welding
or GMAW) or manual MIG
pulsing. Use this control
with the XMT 304/350
CC/CV power sources and
any Miller wire feeder, including automatic
feeders and spool guns. Includes a 25 ft
(7.6 m) cord with 14-pin plug.
Extension Cords for Optima
#043 725 25 ft (7.6 m)
#043 726 50 ft (15.2 m)
#043 727 75 ft (22.9 m)
WC-24 Weld Control
#137 549
Designed for use with
Miller CV power sources
supplying 24 VAC and
14-pin receptacles. For
use with Spoolmatic
30A spool gun.
WC-115A Weld Control
#137 546-01-1
Operates on 115 VAC
and is designed for
power sources without
a 14-pin receptacle. For
use with Spoolmatic 30A spool gun. Includes
10 ft (3 m) wall-type plug and power cord.
PC-300 Pulsed TIG
(DC GTAW) Control
#042 297
For use with both inverter
and non-inverter type
power sources. Includes 8 ft (2.4 m) interconnecting cord and 115 VAC power cord.
HF-251D-1
High-Frequency Arc
Starter and Stabilizer
#042 388
Portable 250 amp, 60%
duty cycle unit adds
high frequency to the
welding circuit to help start the arc when
using the DC TIG (GTAW) process.
Operates on 115 VAC, 50/50 Hz. See Lit.
Index No. AY/5.1.
Process Selector Control #042 872
Designed for use with dual wire feeders,
applications where electrical isolation and/or
polarity reversing of weld current is required,
and for welding process changes. Includes
115 VAC/2 amp receptacle, two 14-pin
receptacles and a 10 ft (3 m) 14-pin cord.
RFCS-14 Foot Control
#043 554
Heavy-duty foot current
and contactor control.
Includes 20 ft (6 m)
cord and 14-pin plug.
RHC-14 Hand Control
#129 340
Miniature hand control
for remote current and
contactor control.
Dimensions: 4 x 4 x
3-1/4 in (102 x 102 x 82 mm). Includes
20 ft (6 m) cord and 14-pin plug.
RMLS-14
#129 337
14-pin plug
Momentary- and maintained-contact rocker
switch for contactor control. Push forward for
maintained contact and back for momentary
contact. Includes 20 ft (6 m) cord.
RCC-14 Remote
Contactor and
Current Control
#151 086
14-pin plug
Rotary-motion fingertip control fastens to
TIG torch using two Velcro® straps.
Includes 28 ft (8.5 m) control cord.
RCCS-14 Remote
Contactor and
Current Control
#043 688
Up-and-down rotary-motion fingertip
control. Great for applications that require
a finer amperage control. Includes 28 ft
(8.5 m) control cord.
Extension Cords for Remote Controls
and 24 VAC Wire Feeders
#122 973 25 ft (7.6 m)
#122 974 50 ft (15.2 m)
#122 975 75 ft (22.8 m)
14-pin plug to 14-pin socket.
Note: Not for use with Optima or 60M Series.
6
Inverter Racks
Four or Six-Arc Welding System
The Inverter Rack
conveniently houses
multiple XMT power
sources for multiple
welders. Both 4-pack
and 6-pack models
are available.
Features include:
Provision to parallel power sources or
common work connections
Two lifting eyes for transportation
Rugged skids for dragging or pushing
Customer can install up to a maximum
of 4 XMT 456 power sources
For detailed information on customized
Inverter Rack systems see Lit. Index No.
DC/18.81.
Running Gear
304/350
Cart
XL Cart
MIGRunner™ Cart
#195 445 (For 304/350 models only)
MIGRunner™ XL Cart
#195 246 (For all models)
Small footprint and easily maneuverable,
with cylinder rack low enough that you do
not have to lift bottles.
XMT Cylinder Cart
#042 537
Carries two 160 lb
(72.6 kg) gas cylinders,
or one gas cylinder and
one coolant system for
TIG (GTAW) welding.
Feeder mounts to tray above power source.
Universal Carrying Cart
and Cylinder Rack
#042 934 (For 304/350
models only)
Holds power source,
and gas cylinder up to
56 in (142.2 cm) high measuring 6 to 9 in
(15.2 to 22.8 cm) in diameter.
Genuine Miller Accessories
Protective Cover
#195 478
Mildew and water
resistant, odor-free cover
protects your machine’s
finish. For 300/350 A
inverters: XMT,
Maxstar and Dynasty.
Wire Feeders/Guns
SuitCase™ 8VS #194 890
SuitCase™ 12VS #194 941
Lightweight, portable wire feeder for a
variety of wires up to .062 in. Holds up to
an 8 in (8VS) or 12in (12VS) spool of wire .
Operates on open-circuit voltage eliminating
the need for a control/power cord. See Lit.
Index No. M/6.4.
SuitCase™ 8RC #194 938
SuitCase™ 12RC #194 940
Lightweight, portable wire feeder for a
variety of wires up to .062 in. Holds up to
an 8 in (8RC) or 12in (12RC) spool of wire.
Operates using 14-pin control receptacle.
See Lit. Index No. M/6.5.
(continued)
60M Series
S-60M #131 794
D-60M #131 796
Semiautomatic
pulsed-MIG and
standard CV-MIG
feeder equipped
with eight synergic pulse programs. Handles
.023 to 1/8 in wires and up to 60 lb spool.
Optional data cards for program storage
and transfer. Pulse arc characteristics are
fully customizable. See Lit. Index No. M/2.4.
Spoolmatic®
30A #130 831
A 1-lb, aircooled spool
gun that extends
the weld process
range by adding a handy portable system
for small wire MIG. Rated 200 A at 100%
duty cycle. Includes 30 ft (9.1 m) cable
assembly. (WC-24 #137 549 for 14 pin.)
Roughneck® C-Series MIG Guns
See Lit. Index No. AY/17.0.
Ironmate™ Flux Cored Guns
See Lit. Index No. AY/16.0.
FC-1260
#195 732 10 ft (3 m)
#195 729 15 ft (4.6 m)
FC-1260LM
#194 912 10 ft (3 m)
#194 911 15 ft (4.6 m)
FC-1150
#194 864 10 ft (3 m)
#194 863 15 ft (4.6 m)
Water Coolant Systems
For more information, see the Miller Coolant
Systems literature sheet, Index No. AY/7.2.
XR Control #181 538
Push-pull wire feed
system offers unparalleled
performance for aluminum
MIG welding. See Lit.
Index No. M/1.7.
S-74 DX #195 059
Wire feeder features
process and weld
control and handles
a variety of wires up
to 1/8 in. See Lit.
Index No. M/3.0.
Coolmate™ 3
#043 007 115 VAC
#043 008 230 VAC
For use with water-cooled torches rated up
to 600 amps. Unique paddle-wheel
indicator, external filter and easy-fill spout.
Coolmate™ V3 #043 009 115 VAC
For use with water-cooled torches rated up
to 500 amps. Vertical design conveniently
mounts to Miller cylinder rack in place of
one cylinder.
Coolmate™ 4 #042 288 115 VAC
For use with water-cooled torches rated up
to 600 amps. Tough molded polyethylene
case with carrying handle.
Coolant #043 810
Sold in cases of four 1-gallon recyclable
plastic bottles. Miller coolants contain a
base of ethylene glycol and deionized water
to protect against freezing to -37˚F (-38˚C)
or boiling to 227˚F (108˚C). Also contains a
compound that resists algae growth.
International-Style Connectors
Note: XMT 304/350 power sources are equipped with
International-style connectors for secondary
connections. (Power source is shipped with two
50-mm male International-style plugs for use with
#1 or #2 AWG size cable.)
International/Tweco®
Adapter #042 465
International/Cam-Lok
Adapter #042 466
One-piece adapter with International-style
male plug (to power source) on one end and
female receptacle (Tweco or Cam-Lok for
weld cable connection) on other end.
International-Style Connector Kit
#042 418 50 mm
Accepts #1 or #2 AWG cable size. Required if
male plugs shipped with power source must
be replaced, or if additional plugs are needed.
#042 533 70 mm
Accepts #1/0 or #2/0 AWG cable size.
Required if #1/0 or #2/0 AWG size cable is
to be used.
Kit includes one International-style male
plug which attaches to the work and/or weld
cables and plugs into the International-style
receptacles on the power source.
Extension Kit for International-Style
Cable Connectors
#042 419 50 mm
Accepts #1 or #2 AWG size cable.
#042 534 70 mm
Accepts #1/0 or #2/0 AWG size cable.
Used to adapt or extend weld and/or work
cables. Kit includes one male Internationalstyle plug and one in-line female
International-style receptacle.
7
Ordering Information
Power Source and Options
Stock No.
Description
Qty.
XMT® 304 CC/CV
#903 471
#903 471-01-1
#903 473
#903 472
#903 522
208-230/460 VAC with Auto-Link®
208-230/460 VAC with Auto-Link® and Auxiliary Power
460/575 VAC with Auto-Link®
400 VAC, 50/60 Hz with Auxiliary Power and CE
400 VAC, 50/60 Hz
XMT® 350 CC/CV
#907 161
#907 161-01-1
#907 161-01-2
208 – 575 VAC with Auto-Line™
208 – 575 VAC with Auto-Line™ and Auxiliary Power
230 – 400 VAC with Auto-Line™ and Auxiliary Power and CE
XMT® 350 VS
#907 224
208 – 575 VAC with Auto-Line™ (without 14-pin connector)
XMT® 456 CC/CV
#907 010
#907 010-01-1
#907 011
#907 012
230/460 VAC
230/460 VAC with Remote On/Off
575 VAC
400 VAC with CE
MIGRunner™ Packages
See page 5 for different packages and components
PULSERunner Packages
See page 5 for different packages and components
Inverter Racks (full or empty)
See Lit. Index No. DC/18.81
™
Accessories
Optima™ MIG Pulse Control
Optima™ Extension Cords
WC-24
WC-115A
PC-300 Pulsed DC TIG Control
Process Selector Control
Gas Solenoid Kit
HF-251D-1 HF Starter/Stabilizer
RFCS-14
RHC-14
RMLS-14
RCC-14
#137 549
#137 546-01-1
#042 297
#042 872
#195 286
#042 388
#043 554
#129 340
#129 337
#151 086
RCCS-14
#043 688
#043 389
Extension Cords (For 24 VAC wire
feeders and remote controls)
For CC/CV models only
See page 6
For use with Spoolmatic 30A and power sources with 14-pin
For use with Spoolmatic 30A and power sources without 14-pin
For XMT 350 models only
See Lit. Index No. AY/5.1
Foot control
Hand control
Rocker switch
Fingertip control
Fingertip control
See page 6. Not to be used with Optima, 60M or XR-M
Running Gear
MIGRunner™ Cart
#195 445
For XMT 304/350 models only
MIGRunner XL Cart
#195 246
For all models
XMT Cylinder Cart
#042 537
For all models
Universal Carrying Cart and Cylinder Rack
#042 934
For XMT 304/350 models only
Protective Cover
#195 478
™
Wire Feeders/Guns
SuitCase™ 8VS / 12VS
SuitCase™ 8RC / 12RC
XR Control
S-74 DX
60M Series
Spoolmatic® 30A Spool Gun
Roughneck® C-Series MIG Guns
Ironmate™ Flux Cored Guns
#194 890 / #194 941
#194 938 / #194 940
#181 538
#195 059
#131 794 / #131 796
#130 831
See Lit. Index No. M/6.4
See Lit. Index No. M/6.5
See Lit. Index No. M/1.7
See Lit. Index No. M/3.0
S-60M / D-60M. See Lit. Index No. M/2.4
Includes 30 ft (9.1 m) cable assembly
See Lit. Index No. AY/17.0
See Lit. Index No. AY/16.0
Water Coolant Systems
See page 7. See Lit. Index No. AY/7.2
International-Style Connectors
See page 7
Date:
Total Quoted Price:
Distributed by:
Litho in USA
Price
Download PDF