Plus | U5-532 | User`s manual | Plus U5-532 User`s manual

SO
UR
CE
AU
TO
STA
ND
BY
ST
AN
DB
Y
ST
AT
US
CE
AU
TO
STA
ND
BY
DBY
ST
AN
US
AT
O
V
E
L
O
V
1
TE
U
M
Q
K
IC
U
Q
TO
U
A
U
N
E
M
B
G
R
R
E
S
LA
O
E
ID
V
Y
B
D
N
TA
S
(U5-632)
R
TE
N
E
FR
EE
ZE
/
K
L
LIC E
-C C
R AN
C
R
E
TIM
3
2
M
O
ZO
4
Y
B
D
N
TA
S
R
G
B
V
ID
E
O
C
A
N
C
F
E
L
R
E
R
E
E
M
E
N
T
N
U
Z
E
1
M
U
T
E
Q
U
2
L
E
IC
K
Q
C
O
K
S
T
3
N
A
U
T
O
Z
O
A
4
S
O
P
M
E
C
T
T
IM
E
R
ST
(U5-532/U5-512)
UR
User’s Manual
SO
U5-632
U5-532/U5-512
U5-632
U5-532 / U5-512
DATA PROJECTOR
IMPORTANT
* DLP™ (Digital Light Processing) and DMD (Digital Micromirror Device) are registered trademarks of Texas Instruments Incorporated (U.S.A.).
* DMD is an ultra-precise part developed by Texas Instruments (U.S.A.) which takes the place of liquid crystal (in the
projector).
* VGA and XGA are trademarks or registered trademarks of International Business Machines Corporation (U.S.A.).
* S-VGA is a registered trademark of Video Electronics Standards Association.
* Microsoft, Windows, and PowerPoint are registered trademarks of Microsoft Corporation (U.S.A. and other countries).
* Macintosh is a trademark of Apple Computer Inc. (U.S.A.).
Note that even in the absence of explanatory notes, serious attention is paid to the trademarks of the various companies
and to the product trademarks.
IMPORTANT SAFETY INFORMATION
Precautions
Please read this manual carefully before using your PLUS Data Projector and keep the manual handy for future
reference.
This User’s Manual applies to the U5-632, U5-532 and U5-512 Data Projectors.
The resolution differs from model to model, and not all models have the high brightness black/white mode or the PC
mouse function. This User’s Manual describes the U5-632 (the full-function model).
Also note that the included remote control unit differs from model to model.
Please check the resolution, functions and type of remote control unit on the table below.
Model
Resolution (Full Functions)
Black/White
mode
U5-632
1024⳯768 (XGA)
嘷
U5-532
U5-512
1024⳯768 (XGA)
800⳯600 (S-VGA)
ⳮ
ⳮ
Type of included remote control unit
Wireless remote control unit with laser pointer (w/ PC
mouse function)
Wireless remote control unit (w/o laser pointer or PC
mouse function)
嘷: Function included ⳮ: Function not included
Applicable projectors will be indicated by Applicable Projector: U5-XXX placed at the description location.
CAUTION
TO PREVENT SHOCK, DO NOT OPEN THE CABINET. NO USER-SERVICEABLE PARTS INSIDE. REFER
SERVICING TO QUALIFIED PLUS SERVICE PERSONNEL.
This symbol warns the user that uninsulated voltage within the unit may have sufficient magnitude
to cause electric shock. Therefore, it is dangerous to make any kind of contact with any part inside
of this unit.
This symbol alerts the user that important literature concerning the operation and maintenance of
this unit has been included. Therefore, it should be read carefully in order to avoid any problems.
The above cautions are given on the bottom of the product.
WARNING
TO PREVENT FIRE OR SHOCK, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. DO NOT USE
THIS UNIT’S GROUNDED PLUG WITH AN EXTENSION CORD OR IN AN OUTLET UNLESS ALL THREE
PRONGS CAN BE FULLY INSERTED. DO NOT OPEN THE CABINET. THERE ARE HIGH-VOLTAGE COMPONENTS INSIDE. ALL SERVICING MUST BE DONE BY QUALIFIED PLUS SERVICE PERSONNEL.
Applicable Projector: U5-632
CAUTION
Do not look at the laser pointer’s light source.
Be sure to heed the following. Pointing the laser beam at
the eyes could lead to reduced vision or vision impairment.
• Never look at the laser pointer’s light source.
• Do not point the laser beam at people.
• Do not let children use the laser pointer.
This label is located on the side of the remote control.
Hg: Lamp in This Product Contains Mercury. Dispose of Lamp According to Local, State or Federal Law.
E-2
IMPORTANT SAFETY INFORMATION
WARNING
This is a class A product. In a domestic environment this product may cause radio interference in which case
the user may be required to take adequate measures.
RF Interference
WARNING
The Federal Communications Commission does not allow any modifications or changes to the unit EXCEPT
those specified by PLUS Vision in this manual. Failure to comply with this government regulation could void
your right to operate this equipment.
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may
cause harmful interference to radio communications. Operation of this equipment in a residential area is likely
to cause harmful interference in which case the user will be required to correct the interference at his own
expense.
DOC Compliance Notice
This Class A digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations.
E-2-1
IMPORTANT SAFETY INFORMATION
Important Safeguards
These safety instructions are to ensure the long life of the unit and to prevent fire and shock. Please read them
carefully and heed all warnings.
Installation
•
•
•
•
•
•
For best results, use the unit in a darkened room.
Place the unit on a flat, level surface in a dry area away from dust and moisture.
Do not place the unit in direct sunlight, near heaters or heat radiating appliances.
Exposure to direct sunlight, smoke or steam can harm internal components.
Handle the unit carefully. Dropping or jarring can damage internal components.
Do not place heavy objects on top of the unit.
Power Supply
• The unit is designed to operate on a power supply of 100 – 120/220 – 240 V 50/60 Hz AC. Ensure that your
power supply fits these requirements before attempting to use the unit.
• Handle the power cable carefully and avoid excessive bending. A damaged cord can cause electric shock or
fire.
• Disconnect the power cable (mains lead) from the power outlet after using the unit.
Before disconnecting the power cable, make sure that the STANDBY indicator lights in amber (not blinking or
in green).
Cleaning
• Disconnect the power cable (mains lead) from the unit.
• Clean the cabinet of the unit periodically with a damp cloth. If heavily soiled, use a mild detergent. Never use
strong detergents or solvents such as alcohol or thinner.
• Use a blower or lens paper to clean the lens, and be careful not to scratch or mar the lens.
• Clean the ventilation slots and speaker grills on the unit periodically using a vacuum cleaner. If accumulated
dust blocks the ventilation slots, the unit will overheat, which may cause the unit to malfunction.
Use a soft brush attachment when using the vacuum cleaner. Do not use a hard attachment, such as a crevice
tool, to prevent the damage to the unit.
Lamp Replacement
• Be sure to replace the lamp when the Status indicator comes on. If you continue to use the lamp after 2000
hours of usage, the lamp will turn off.
Fire and Shock Precautions
• Ensure that there is sufficient ventilation and that vents are unobstructed to prevent the buildup of heat inside
the unit. Allow at least 10 cm (3 inches) of space between the unit and walls.
• Prevent foreign objects such as paper clips and bits of paper from falling into the unit. Do not attempt to retrieve
any objects that fell into the unit. Do not insert any metal objects such as a wire or screwdriver into the unit. If
something should fall into the unit, immediately disconnect the power cable from the unit and have the object
removed by a qualified PLUS service person.
• Do not place any liquids on top of the unit.
Cautions on Handling the Storage Case
• Do not put anything other than the unit or its accessories in the storage case. Paper clips, staples or other metal
or foreign objects getting inside could cause fire or electric shock.
• Do not swing the storage case around when the unit is inside. Also do not force objects that are too large to fit
into the storage case. Doing so could scratch or damage the unit.
When Moving the Unit
• When moving the unit to a different place, put it in the included storage case and place the storage case in an
insulating package to protect against falls and shocks.
• If there are paper clips, staples or other metal or foreign objects inside the storage case, the objects could get
inside the unit while the unit is being moved, causing fire or electric shock when the power is turned on.
CAUTION – HOT!
The area around the exhaust vents is hot during and immediately after image projection.
To avoid burns, keep your hands away from this area.
Wait until the exhaust vents area cools off before touching it.
Do not look into the lens while the unit is on. Serious damage to your eyes could result.
E-3
Major Features
䡵 Lightweight high-intensity projector
The synergy of the DLP™ (Digital Light Processing) display system and our own optical design serve to improve the optical
utilization efficiency. The three primary colors (RGB) required in color expression are reproduced with one DMD (Digital
Micromirror Device of high precision). These factors have enabled a design that offers both high intensity and small size/
lightweight features.
䡵 Sharp, clear picture
The DLP™ display system affords RGB color fidelity and inconspicuous gaps between the individual dots, thereby permitting
the display of small characters and diagrams with distinct clarity.
䡵 Industry’s first B/W mode for switching from the color mode to an image with a stronger brightness
Applicable Projector: U5-632
When projecting documents, spreadsheets or other mostly black and white data, the image can be projected with stronger
brightness than in the color mode by switching to the “Color B/W Switching” in the menu settings. This function is a first for a
projector, and takes advantage of the features of high contrast rate DLP projectors.
䡵 Powerful functions for presentations
A wide variety of easy-to-set functions have been built into the projector, from a digital keystone correction function (used
when making settings) that corrects picture distortion, to an auto adjustment function that automatically identifies the PC
signal.
A presentation timer that supports presentations and a security lock function protecting against unauthorized projection have
also been added.
䡵 High contrast ration of 2000:1
Use of a new generation of DMD devices has given birth to an amazing 2000:1 high contrast ratio.
By widening the difference of brightness between black and white, you can see a degree of sharpness that is greater than just
the brightness based on specifications.
䡵 Beautiful reproduction of high-quality images from DVD
Faithful reproduction of color tones gives rise to the display of natural images. High-quality images such as those from DVD
and digital high-definition television broadcasts bring out the display capabilities that are an essential strength of the DLP™
display system projector.
䡵 Econo-mode switch function for the lamp output
Using the lamp Econo-mode will extend the life of the lamp and lower the power consumption.
By switching the lamp mode to suit your operating environment, you will save on lamp cost as well as contribute to energy
conservation and ecology.
E-4
Table of Contents
IMPORTANT SAFETY INFORMATION ................................................................................... E-2
Major Features ....................................................................................................................... E-4
Table of Contents ................................................................................................................... E-5
Checking the Supplied Accessories .................................................................................... E-7
Names of the Main Unit Parts ............................................................................................... E-9
Names of the Remote Control Parts/Preparing the Remote Control .............................. E-11
Names of Parts/Preparing the Remote Control Unit
Included with the U5-632 ........................................................................................... E-11
Names of Parts/Preparing the Remote Control Unit
Included with the U5-532 and U5-512 ....................................................................... E-12
Remote Control Range ............................................................................................. E-13
The Procedure Up to Projecting to the Screen ................................................................. E-14
Placement Guide .................................................................................................................. E-15
U5-632 Screen Size and Projection Distance ........................................................... E-15
U5-532/U5-512 Screen Size and Projection Distance .............................................. E-16
Connecting Personal Computers and Video Equipment .................................................. E-17
Connections with Personal Computer ....................................................................... E-17
Connect the projector’s RGB connector using the included RGB signal cable. .. E-17
To Output the External Output Signal of a Notebook Computer ......................... E-18
Connections with Composite Signals ........................................................................ E-19
Video Equipment with VIDEO Connectors .......................................................... E-19
Video Equipment with S-VIDEO Connectors ...................................................... E-19
Connections with Component Signals ....................................................................... E-20
When the Video Equipment Has a YCbCr Connector or YPbPr Connector ........ E-20
Connections with the AUDIO Jack ............................................................................ E-21
Connections with the RGB OUT Connector .............................................................. E-22
Power Cable Connections and Switching the Power On/Off ........................................... E-23
Operating ................................................................................................................... E-23
Finishing .................................................................................................................... E-25
Adjustment of the Projection Screen ................................................................................. E-26
Adjustment of the Projection Screen ......................................................................... E-26
Making Adjustments with the Adjusters .............................................................. E-27
General Operation ................................................................................................................ E-28
Input Selection .......................................................................................................... E-28
Automatic Adjustment ............................................................................................... E-28
Selection of Aspect Ratio .......................................................................................... E-29
Freezing a Moving Picture ......................................................................................... E-30
Cancelling Video and Audio Temporarily ................................................................... E-30
Lamp Mode ............................................................................................................... E-30
Keystone .................................................................................................................... E-31
Adjustment of the Volume .......................................................................................... E-31
Enlargement of the Image and Video Movement ...................................................... E-32
Using the Presentation Timer .................................................................................... E-33
Using the Laser Pointer ............................................................................................. E-34
Performing Mouse Operations on the Computer
with the Remote Control Unit .................................................................................... E-35
Controlling the Projector from a Computer ................................................................ E-36
Use as a High-Brightness Monochrome Projector .................................................... E-36
Protecting the Projector with the Security Lock ......................................................... E-37
Using the Quick Menu ............................................................................................... E-39
Menu Operation Method ...................................................................................................... E-40
Performing Menu Operations .................................................................................... E-42
List of Item Names Offering Input Selection and Adjustments/Settings .................... E-45
Image ..................................................................................................................................... E-47
Brightness / Contrast / Color / Tint / Sharpness ........................................................ E-47
Picture Adj. / Fine Picture / H Position / V Position .................................................... E-47
Reset ......................................................................................................................... E-48
E-5
Table of Contents
Color ......................................................................................................................................
Quick Color Adj. ........................................................................................................
Gamma .....................................................................................................................
Color Temp. ...............................................................................................................
White .........................................................................................................................
Color Space ..............................................................................................................
White Balance ...........................................................................................................
View .......................................................................................................................................
Aspect .......................................................................................................................
Filter ..........................................................................................................................
Vertical Flip ................................................................................................................
Keystone ....................................................................................................................
Keystone Save ..........................................................................................................
Setup .....................................................................................................................................
Color B/W Switching .................................................................................................
Auto Source ...............................................................................................................
Auto Power Off ..........................................................................................................
Menu Position ............................................................................................................
Lamp Mode ...............................................................................................................
Input Format ..............................................................................................................
Presentation Timer ....................................................................................................
Option ...................................................................................................................................
Language ..................................................................................................................
On Screen .................................................................................................................
Background ...............................................................................................................
Startup Screen ..........................................................................................................
Security Lock .............................................................................................................
Info. ........................................................................................................................................
Status ........................................................................................................................
Factory Default ..........................................................................................................
Lamp Timer Reset .....................................................................................................
Resolution / Frequency .............................................................................................
Lamp Timer ...............................................................................................................
When an Indicator is Lit or Flashing ..................................................................................
Troubleshooting ...................................................................................................................
Cleaning ................................................................................................................................
Replacing the Lamp Cartridge ............................................................................................
Specifications .......................................................................................................................
Table of Supported Frequency ...........................................................................................
Cabinet Dimensions ............................................................................................................
E-6
E-49
E-49
E-49
E-50
E-50
E-50
E-51
E-52
E-52
E-52
E-53
E-53
E-53
E-54
E-54
E-54
E-54
E-55
E-55
E-56
E-56
E-57
E-57
E-57
E-57
E-58
E-58
E-59
E-59
E-59
E-59
E-60
E-60
E-61
E-62
E-63
E-64
E-67
E-69
E-70
Checking the Supplied Accessories
Remove the main unit and the accessories from the box and check that the following items are included.
S-Video cable (Mini DIN 4-pin plug, 2 m / 6.6 feet) [1]
This cable is used in the connection of video equipment that
has an S-video connector. Connections are described on Page
E-19.
No. 777704000
O
V
U
O
N
E
S
TA
N
D
B
Y
R
G
B
M
V
E
ID
LA
S
E
R
A
U
TO
Q
U
IC
E
K
N
TE
Q
R
ZE
EE
FR
M
U
TE
/
K
L
LIC E
-C C
R AN
C
TI
1
M
E
L
R
3
2
ZO
M
O
4
Wireless remote control unit with laser pointer [1] /
Size AAA batteries [2]
Applicable Projector: U5-632
This controls the projector. (See Page E-11.)
* The wireless remote control is sold separately for the U5532 and U5-512.
VR-100 remote mouse set (sold separately)
(Ordering code: 28-052)
Video cable (RCA pin plug, 2 m / 6.6 feet) [1]
This cable is used in the connection of video equipment that
has a video connector. Connections are described on Page
E-19.
No. 777703000
L
O
V
Y
B
D
N
TA
S
B
G
R
O
E
ID
V
F
1
E
Z
E
E
R
L
E
C
N
A
C
R
E
T
N
E
U
N
E
M
T
U
M
E
2
K
IC
U
Q
Q
O
C
E
K
3
N
T
S
O
T
U
A
Z
4
M
O
O
T
C
E
P
S
A
R
E
IM
T
Wireless remote control unit
(includes one button battery) [1]
Applicable Projector: U5-532/U5-512
This controls the projector. Please remove the transportation
insulation sheet at time of purchase. (See Page E-12.)
RGB signal cable
(Mini D-sub 15-pin, 2 m / 6.6 feet) [1]
This is used in making connections with a personal computer.
See Page E-17 about connections.
No. 777709000
Audio cable (Mini plug, 2 m / 6.6 feet) [1]
This cable is used with equipment that has phono type audio
jacks. Connections are described on Page E-21.
No. 777705000
Power cable (1.8 m / 5.9 feet) [1]
This power cable supplies power to the unit. See Page E-23
about connections.
Audio conversion adapter (Mini-jack/ RCA pin plug, 15 cm
/ 0.5 feet) [1]
This cable is used with equipment whose audio connector is
of the phono pin type. Connections are described on Page
E-21.
No. 777706000
E-7
Checking the Supplied Accessories
USB cable (type A, 2 m / 6.6 feet) [1]
Applicable Projector: U5-632
Used to perform mouse operations on a computer using the
projector’s remote control unit. Connections are described on
Page E-35.
No. 777707000
* The wireless remote control is sold separately for the U5532 and U5-512.
VR-100 remote mouse set (sold separately)
(Ordering code: 28-052)
Storage case (for projector and accessories) [1]
This case is designed to hold the projector itself and its
accessories.
Use it when storing the projector.
HOW TO PUT THE PROJECTOR INTO THE STORAGE CASE
Close the lens shutter or lens cap before putting the projector in its case, then fasten the projector in place with the
Velcro belt. Place the accessories in the storage pocket.
Velcro strap
Pocket
Cable storage pouch [1]
User’s Manual (CD-ROM edition) [1]
User’s Manual (Simplified Edition) [1]
E-8
Names of the Main Unit Parts
TA
TU
S
N
TA
S
D
Y
B
S
TA
N
D
B
Y
A
U
TO
S
O
U
R
C
E
Applicable Projector: U5-632
S
Zoom ring [E-26]
Focus ring [E-27]
Exhaust vents
Ventilation slots
Remote control
sensor [E-13]
Adjuster button [E-27]
(Also on opposite side)
B
D
N
TA
S
Lens
TA
TU
S
S
TA
N
D
B
Y
Applicable Projector: U5-532/U5-512
S
Zoom ring [E-26]
Lens cap
Remove before use. Attach
the lens cap after use to
protect the lens.
Exhaust
vents
Focus ring [E-27]
Lens
Lens cap
Ventilation slots
Lamp cover [E-65]
Adjusters [E-27]
E-9
Names of the Main Unit Parts
STATUS indicator [E-23, 61]
STATUS
STANDBY indicator [E-23, 61]
STANDBY
STANDBY button [E-23]
STANDBY
AUTO button [E-28]
AUTO
SOURCE button [E-28]
SOURCE
Remote control sensor [E-13]
S
TU
TA
S
Y
B
D
N
TA
S
Y
B
D
N
TA
S
TO
U
A
O
S
E
C
B
R
G
U
R
S
E
ID
V
O
AC IN connector [E-23]
O
E
ID
V
IO
D
U
A
E
S
U
O
M
PC
CO
NT
RO
L
Speaker
Built-in security slot
(See description below.)
Ventilation slots
Applicable Projector: U5-632/U5-532
MOUSE connector [E-35]
AUDIO connector [E-21]
PC CONTROL
RGB
S VIDEO
VIDEO
AUDIO
PC CONTROL connector (D-Sub 9-pin)
[E-36]
MOUSE
VIDEO connector [E-19]
Applicable Projector: U5-512
S-VIDEO connector [E-19]
RGB connector [E-17, 20]
RGB OUT
RGB OUT connector (Mini D-sub 15-pin)
[E-22]
Built-in Security Slot
This security slot supports the MicroSaver Security System manufactured by
Kensington Microware Inc.
E-10
Names of the Remote Control Parts/Preparing the Remote Control
There are two types of remote control units included with the U5 series of projectors. Both types are described below.
Refer to the description (and diagram) for the remote control unit included with your projector.
Names of Parts/Preparing the Remote Control Unit
Included with the U5-632
Applicable Projector: U5-632
Names of the Remote Control Parts
Infrared transmitter [E-13]
Laser transmitter [E-34]
L-CLICK button [E-35]
STANDBY button [E-23, 25]
This button is used to switch ON
the power aand set the unit to the
STANDBY mode.
LASER button [E-34]
(Turns the laser point on and off)
STANDBY
LASER
VIDEO
RGB
Buttons used for input selection
[E-28]
RGB button and VIDEO button
(VIDEO / S-VIDEO)
Buttons used for menu operations
[E-40]
The , ,
and
buttons are
the select (왖, 왔, 왗 and 왘) buttons.
AUTO button [E-28]
(Automatic adjustment of the RGB
moving image)
AUTO
MENU
QUICK
QUICK button [E-39]
(Displays a simplified menu)
Q
Buttons used for the PC mouse
function [E-35]
(JOG button and R-CLICK button)
R-CLICK/
CANCEL
ENTER
FREEZE
TIMER button [E-33]
(Presentation timer time setting
display)
TIMER
MUTE
FREEZE button [E-30]
(Freezes moving pictures)
VOL button [E-31]
(Volume adjustment)
1
2
VOL
ZOOM
3
4
MUTE button [E-30]
(Temporarily cancels the video and
audio)
ZOOM button [E-32]
(Digital zoom adjustment)
Note:
If a button on the remote control unit is held in continuously for approximately 30 seconds, signal
transfer will be suspended. To resume transferring
signals, press the button again.
Also, to use the jog button after signal transfer has
been suspended, first press any other button, then
press the jog button.
Number buttons [E-37]
(Used for the security lock.)
Inserting the Batteries
When using the remote control for the first time, install the batteries that were supplied.
the battery compartment
Insert the batteries to match
(A) Leaving a little space in the front, close
1 Slide
cover (located on the bottom 2 the "+" and "–" as indicated in- 3 the lid, (B) then with the back pressed tightly,
of the remote control) and pull
off.
side the compartment.
(C) press the lid towards the front.
(A)
CAUTION
When replacing batteries, purchase two of the same type of AAA battery.
Heed the regulations in effect in your region on the disposal of spent batteries.
E-11
(C)
(B)
Names of the Remote Control Parts/Preparing the Remote Control
Names of Parts/Preparing the Remote Control
Unit Included with the U5-532 and U5-512
Applicable Projector: U5-532/U5-512
Names of the Remote Control Parts
Infrared transmitter [E-13]
STANDBY button [E-23, 25]
This button is used to switch ON
the power aand set the unit to the
STANDBY mode.
Buttons used for menu operations
[E-40]
The , ,
and
buttons are
the select (왖, 왔, 왗 and 왘) buttons.
Buttons used for input selection
[E-28]
RGB button and VIDEO button
(VIDEO / S-VIDEO)
STANDBY
MENU
VIDEO
MUTE button [E-30]
(Temporarily cancels the video and
audio)
QUICK button [E-39]
(Displays a simplified menu)
ENTER
RGB
CANCEL
QUICK
ECO button [E-30]
(Selection of lamp mode)
Q
Number buttons [E-37]
(Used for the security lock.)
FREEZE
MUTE
ECO
1
2
3
AUTO button [E-28]
(Automatic adjustment of the RGB
moving image)
AUTO
4
ASPECT
FREEZE button [E-30]
(Freezes moving pictures)
VOL
KSTN
ZOOM
ASPECT button [E-29]
(Selects the vertical and horizontal
ratio of the screen)
TIMER
VOL button [E-31]
(Volume adjustment)
TIMER button [E-33]
(Presentation timer time setting
display)
KSTN button [E-31]
(Keystone correction adjustment)
ZOOM button [E-32]
(Digital zoom adjustment)
Button Battery Replacement
Using the remote control for the first time
The battery compartment is fitted with a transportation insulation sheet at the time of shipping. Pull
out the sheet and remove it. The remote control is now ready for use.
Replacement Method
With the knob pressed to
the old battery and inthe battery holder into the re1 (A)
2 Remove
3 Insert
the right side, (B) draw out the
stall a new button battery with (+)
mote control and push in until the
side facing upward in the battery
holder.
battery holder closes with a “click”
sound.
5
C
R
2
0
2
C
CR2
025
R
2
0
2
5
battery case.
(B)
(A)
Purchase a CR2025 type battery for replacement.
CAUTION
Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type (CR2025) recommended by the manufacturer.
Dispose of used batteries according to your local regulations.
E-12
Names of the Remote Control Parts/Preparing the Remote Control
Remote Control Range
Point the infrared transmitter of the remote control toward the remote control sensor located at the front or rear of the main unit
and operate.
Reception of the remote control signal should generally be possible within the range illustrated below.
Applicable Projector: U5-632
6m/19.7feet
Side View
Top View
et
Remote control infrared transmitter
.8
fe
/9
3m
30°
30°
5°
Remote control inRemote con- frared transmitter
trol sensor
5°
20°
20°
5m/16.4feet
Remote control sensor
5m/16.4feet
Applicable Projector: U5-532/U5-512
6m/19.7feet
Side View
5°
Top View
et
Remote control infrared transmitter
.8
fe
/9
3m
Remote control inRemote con- frared transmitter
trol sensor
5°
Remote control sensor
Note
* Exposure of the main unit's remote control sensor or the remote control infrared transmitter to bright light or the obstruction of the signal
by an obstacle located in the pathway may prevent operation.
* The remote control will not function when the battery is exhausted.
Precautions
Handling of the Remote Control
* Do not drop the remote control or handle it inappropriately.
* Do not expose the remote control to water or other liquids. Should the remote control become wet, wipe it dry
immediately.
* Try to avoid use in hot and/or humid locations.
* Please keep button batteries out of the reach of children. If a battery is swallowed, promptly obtain the medical care
of a doctor.
* Remove the batteries from the remote control when it is not going to be used for a long period.
* Some operations (such as menu operations) are available only through the use of the remote control and attention
should be given to its careful handling.
E-13
The Procedure Up to Projecting to the Screen
Perform setup adjustments in the following order.
1 Position the projector
Determine the locations to set up the screen and the projector.
See “Placement Guide” on Page E-15.
2 Connect the video equipment and personal computer
Connect your equipment to the projector.
When making connections with the personal computer’s RGB connector, see “Connections with
Personal Computer” on Page E-17.
When making connections with the video equipment’s video connector or an S-video connector,
see “Connections with Composite Signals” on Page E-19.
When making connections with the video equipment’s YCbCr connector or YPbPr connector,
see “Connections with Component Signals” on Page E-20.
When playing the audio through the built-in speaker of the projector, see “Connections with the
AUDIO Jack” on Page E-21.
Monitoring the analog RGB input signal, see “Connections with the RGB OUT Connector” on
Page E-22.
Applicable Projector: U5-512
3 Opening the lens cap
4 Connecting the power cable and switching on the power
See “Operating” on Page E-23.
See “Finishing” on Page E-25.
5 When selecting the language of menu displays, etc.
(Only when the power is first switched on following purchase)
See “When [Menu Language Select] Is Displayed Upon Switching On the Power” on Page E-24.
6 Switching on the power of the personal computer and video equipment
7 Properly adjust the projection image to the screen
See “Adjustment of the Projection Screen” on Page E-26.
8 Selecting input equipment
See “Input Selection” on Page E-28.
9 Adjust the screen or video image
Adjust the image to the optimum condition as required.
See the Table of Contents for the adjustment items.
About DLP projectors
Though careful attention is paid to providing optimum quality, please note that with DLP type projectors, in rare cases there may
be black spots or bright spots among the picture elements.
Note:
* Please purchase a screen.
* A component cable (order code 28-690), which is available separately, is required to connect a DVD player or other equipment with YCbCr
connectors.
* A component cable (order code 28-690), which is available separately, is required to connect high definition (HD) video equipment or other
equipment with YPbPr connectors.
E-14
Placement Guide
• Use this information as a guide to find out about the screen size when the projector is placed at a certain location, or
to find out the approximate size of a screen that will be required.
• Refer to the projection distance table for your projector model.
• When suspending the projector from the ceiling, change the projection method. See “Vertical Flip” on E-53.
U5-632 Screen Size and Projection Distance
• The projection distance over which focussing is adjustable is 1.20 m (3.94 feet) to 9.59 m (31.46 feet). The projector
should be placed within this range.
Screen Size Designation (Inches)
300
"
Height from center of
lens to top edge of
the projection
250
"
200
"
180
"
h1
150
Height from center of
lens to bottom edge
of the projection
"
120
"
100
"
h2
80"
60"
Unit: m (feet)
"
1
(3 .20
.9
4)
1.5
7–
1.9
0(5
2.
10
.15
–2
–6
.23
.5
)
4
2.
(6
64
.8
9–
–3
8.
.1
33
8(
3.
8.
)
17
66
–3
–1
.8
0.
1(
43
10
)
.4
0–
3.
97
12
–4
.5
0)
.7
8(
13
.0
2–
4.
15
77
.6
–5
8)
.7
3(
15
5.
.
65
30
–1
–6
8.
.3
80
8(
17
)
.3
9–
20
.9
6.
3)
64
–7
.9
8(
21
.7
8–
26
.1
7.
8)
97
–9
.5
9(
26
.1
5–
31
.4
6)
38.4
Width
Lens surface of
the main unit
Screen size (Diagonal)
Screen Size
Designation (Inches)
Screen Size Width x Height
(m)
(feet)
Projection Distance
(m)
(feet)
Wide – Tele
Height h1
(m)
(feet)
Height h2
(m)
(feet)
Wide – Tele
2.26 0.10
0.33
38.4"
0.78⳯0.59
— – 1.20
— – 3.94 0.69
2.56 ⳯ 1.92
3.54 0.16
0.52
60"
1.22⳯0.91
1.57 – 1.90
5.15 – 6.23 1.08
4.00 ⳯ 3.00
4.69 0.22
0.72
80"
1.63⳯1.22
2.10 – 2.54
6.89 – 8.33 1.43
5.33 ⳯ 4.00
5.87 0.27
0.89
100"
2.03⳯1.52
2.64 – 3.18
8.66 – 10.43 1.79
6.67 ⳯ 5.00
7.05 0.32
1.05
120"
2.44⳯1.83
3.17 – 3.81 10.40 – 12.50 2.15
8.00 ⳯ 6.00
8.83 0.40
1.31
150"
3.05⳯2.29
3.97 – 4.78 13.02 – 15.68 2.69
10.00 ⳯ 7.50
1.61
180"
3.66⳯2.74
4.77 – 5.73 15.65 – 18.80 3.23 10.60 0.49
12.00 ⳯ 9.00
1.77
200"
4.06⳯3.05
5.30 – 6.38 17.39 – 20.93 3.59 11.78 0.54
13.33 ⳯10.00
2.20
250"
5.08⳯3.81
6.64 – 7.98 21.78 – 26.18 4.48 14.70 0.67
16.67 ⳯12.50
2.66
300"
6.10⳯4.57
7.97 – 9.59 26.15 – 31.46 5.38 17.65 0.81
20.00 ⳯15.00
* There is a tolerance of ±5% due to design values.
* This table uses the lens apex and lens center as references and requires that the projector be in a horizontal condition
(with front and rear adjusters fully withdrawn).
E-15
Height
Placement Guide
U5-532/U5-512 Screen Size and Projection Distance
• The projection distance over which focussing is adjustable is 1.20 m (3.94 feet) to 13.36 m (43.83 feet). The projector
should be placed within this range.
Screen Size Designation (Inches)
30
0"
Height from center of
lens to top edge of
the projection
25
0"
20
0"
h1
18
0"
Height from center of
lens to bottom edge
of the projection
15
0"
12
h2
0"
10
0"
80
"
60
.3
2–
13
6.
.1
11
56
–3
1.
(3
1.
20
62
–1
9.
8–
2
.2
7.
40
–8
.9
0(
0(
21
24
.8
9.
)
25
6.
8–
2
8)
.8
.0
18
–2
1
8.
(1
67
67
–8
4.
4–
1
54
–6
.
Width
5.
6.
)
53
)
.0
12
.3
43
–5
Lens surface of
the main unit
Screen Size
Designation (Inches)
Unit: m (feet)
4.
3.
67
–4
.4
3(
3(
12
.6
.0
5–
1
4–
1
1.
4.
61
53
)
9)
.6
(9
54
94
–3
.
2.
2.
20
–2
.6
6–
1
5(
.75
7.
(4.
22
–8
79
–5
.74
)
1
(3 .2
.9 0
4)
1.4
6(
)
52
40"
)
6"
13
27.
36
.4
8–
4
3.
83
)
"
Screen size (Diagonal)
Screen Size Width x Height
(m)
(feet)
Projection Distance
(m)
(feet)
Wide – Tele Wide – Tele
Height h1
(m)
(feet)
Height h2
(m)
(feet)
1.38
0.23
27.6"
0.56⳯0.42
— – 1.20
0.07
— – 3.94 0.42
1.84 ⳯ 1.38
2.36
0.36
40"
0.81⳯0.61
1.46 – 1.75 4.79 – 5.74 0.72
0.11
2.67 ⳯ 2.00
3.51
0.52
60"
1.22⳯0.91
2.20 – 2.65 7.22 – 8.69 1.07
0.16
4.00 ⳯ 3.00
4.69
0.69
80"
1.63⳯1.22
2.94 – 3.54 9.65 – 11.61 1.43
0.21
5.33 ⳯ 4.00
5.87
0.89
100"
2.03⳯1.52
3.67 – 4.43 12.04 – 14.53 1.79
0.27
6.67 ⳯ 5.00
7.05
1.05
120"
2.44⳯1.83
4.43 – 5.33 14.53 – 17.49 2.15
0.32
8.00 ⳯ 6.00
8.83
1.31
150"
3.05⳯2.29
5.54 – 6.67 18.18 – 21.88 2.69
0.40
10.00 ⳯ 7.50
1.57
180"
3.66⳯2.74
6.67 – 8.00 21.88 – 26.25 3.22 10.56 0.48
12.00 ⳯ 9.00
1.77
200"
4.06⳯3.05
7.40 – 8.90 24.28 – 29.20 3.59 11.78 0.54
13.33 ⳯10.00
2.20
250"
5.08⳯3.81
9.62 – 11.13 31.56 – 36.52 4.48 14.70 0.67
16.67 ⳯12.50
2.66
300"
6.10⳯4.57
20.00 ⳯15.00 11.12 – 13.36 36.48 – 43.83 5.38 17.65 0.81
* There is a tolerance of ±5% due to design values.
* This table uses the lens apex and lens center as references and requires that the projector be in a horizontal condition
(with front and rear adjusters fully withdrawn).
E-16
Height
Connecting Personal Computers and Video Equipment
Connecting this unit with a personal computer permits presentation data to be projected as a large screen display at
conferences, lectures, and on other occasions. Furthermore, connecting this unit to a DVD player or other video equipment source in combination with an audio/video amplifier and speaker system will allow you to enjoy convincing home
theater.
Connections with Personal Computer
Please check the following before making connections with the personal computer.
• A suitable resolution for the U5-512 is 800 ⳯ 600 dots (S-VGA) and the maximum displayable resolution is XGA (1024 ⳯ 768
dots).
• A suitable resolution for the U5-632/U5-532 is 1024 ⳯ 768 dots (XGA) and the maximum displayable resolution is S-XGA
(1280 ⳯ 1024 dots).
Make changes to a displayable resolution at the personal computer side. Please check with “Table of Supported Frequency” on
Page E-69.
• The setting method for the personal computer will differ depending on the specific model. Please read the personal computer
instruction manual or the on-line help information, or contact the manufacturer of your personal computer.
Connect the projector’s RGB connector using the included RGB signal cable.
•
•
•
When making connections with the RGB connector of the projector, please make the connection via the supplied RGB signal
cable.
The projector has been set to “Auto” at the factory; however, if it does not project, please change the input setting to “RGB”
using the menu sequence of [Setup] → [Input Format] → [RGB].
See “Input Format” on Page E-56.
If the USB cable is connected to the projector’s MOUSE connector, mouse operations can be performed on the computer from
the projector’s remote control unit. Applicable Projector: U5-632
See “Performing Mouse Operations on the Computer with the Remote Control Unit” on Page E-35.
MONITOR OUT
Personal
computer
RGB signal cable (Supplied item)
Note:
* Before making connections, check the power of the projector and the equipment to be connected is switched off.
* When projection will be with a notebook computer connected, knowledge will be required for the cable connection and notebook computer
startup procedure as well as the operation that follows startup. Please consult the instruction manual of your notebook computer or the online help.
E-17
Connecting Personal Computers and Video Equipment
To Output the External Output Signal of a Notebook Computer
When projection will be with a notebook computer connected, knowledge will be required for the cable connection and notebook
computer startup procedure as well as the operation that follows notebook startup. Please consult the instruction manual of your
notebook computer or the on-line help while performing the following procedure.
whether a signal is being sent from the notebook computer to the projector.
1 Check
An indication appearing on the liquid crystal display of the notebook computer does not necessarily mean that an external
output signal is being output.
REFERENCE: When “Resolution” or “Frequency” is not displayed under “Info.” on the menu of the projector, this means that
the external output signal is not being output from the personal computer. See “Resolution/Frequency” on Page E-60.
a sign not be output from the notebook computer, please try the operation described below.
2 Should
For an IBM PC/AT compatible computer, press the [Fn] key plus any one of the [F1] to [F10] keys. (See the table below.)
Manufacturer
Model
Key
DELL
All computers
Fn + F8
EPSON
All computers
Fn + F8
FUJITSU
All computers
Fn + F10
iiyama
All computers
Fn + F3
IBM
All computers
Fn + F7
NEC
All computers
Fn + F3
Panasonic
All computers
Fn + F3
SHARP
All computers
Fn + F5
SONY
All computers
Fn + F7
SOTEC
All computers
Fn + F3–F5
TOSHIBA
All computers
Fn + F5
Victor
All computers
Fn + F10
Note: Table information is current to December 2003.
Note:
When the liquid crystal display of the notebook computer and the projector are displayed at the same time, the projected image might not be
correct even though the liquid crystal display shows a correct indication. Should this occur, stop the simultaneous display of the notebook
computer and try the mode with external output only. Try an operation such as that described in aforementioned Step 2 and try closing the
liquid crystal panel which might result in external output only.
E-18
Connecting Personal Computers and Video Equipment
Connections with Composite Signals
Video Equipment with VIDEO Connectors
• The input setting of the VIDEO connector has been set to “Auto” at the factory; however, if the projector does not project, please
change the input setting to “Your Country’s Television Broadcast System” using the menu sequence of [Setup] → [Input Format]
→ [Video].
See “Input Format” on Page E-56.
Video Equipment with S-VIDEO Connectors
• Make the connection to the S-VIDEO connector of the projector using the supplied S-video cable.
• The input setting of the S-VIDEO connector has been set to “Auto” at the factory; however, if the projector does not project,
please change the input setting to “Your Country’s Television Broadcast System” using the menu sequence of [Setup] → [Input
format] → [S-Video].
See “Input Format” on Page E-56.
Video deck, DVD player, document
camera, etc.
VIDEO
Video cable (Supplied item)
S-Video cable (Suppled item)
E-19
S-VIDEO
Connecting Personal Computers and Video Equipment
Connections with Component Signals
When the Video Equipment Has a YCbCr Connector or YPbPr Connector
• The projector has been set to “Auto” at the factory; however, if it does not project, please change the input setting to “Component” using the menu sequence of [Setup] → [Input Format] → [RGB].
See “Input Format” on Page E-56.
• When projecting the YCbCr signal or YPbPr signal, if the color of the overall image strongly leans toward being greenish or
another color, change the setting under the menu of [Color] → [Color Space].
See “Color Space” on Page E-50.
Component cable (Available as an option)
Order code: 28-690
Green
Blue
Red
Y
Cb
Cr
COMPONENT
COMPONENT
Y
Pb
Pr
Green
Blue
Red
Component cable (Available as an option)
Order code: 28-690
E-20
Connecting Personal Computers and Video Equipment
Connections with the AUDIO Jack
* Make the connection to the projector’s AUDIO jack using the supplied audio cable. When the audio jack of the equipment that
is to be connected is of the RCA phono type, make connection via the supplied audio conversion adapter.
* The built-in speaker of the projector provides monaural audio. To enjoy convincing audio reproduction, please connect the
audio output of the video equipment to your audio system.
* The built-in speaker outputs the audio of the equipment connected to the AUDIO jack.
White
Audio cable (Supplied item)
AUDIO OUT
L
Audio conversion adapter
(Supplied item)
Audio cable (Supplied item)
E-21
R
Red
Connecting Personal Computers and Video Equipment
Connections with the RGB OUT Connector
•
•
•
•
Applicable Projector: U5-512
The image from the computer connected to the RGB connector is output.
The image of the connector selected with the input selection function is output.
If an input other than RGB is selected with the input selection function, the output does not switch.
While controlling the personal computer in front of you, the same screen can be projected with the projector. This allows
personal computer control even from a position at which the projector image cannot be viewed.
Image projected to the screen
RGB connector of
the monitor
(Mini D-Sub 15-pin)
E-22
Power Cable Connections and Switching the Power On/Off
There is an order in which the power cable is connected and the power is switched on/off.
Operating
1 Connect the AC IN connector of the projector and the power outlet using the supplied power cable.
The STANDBY indicator will light in amber, and the unit will enter the standby mode.
STATUS
US
AT
ST
STA
BY
ND
AN
ST
DB
Y
AU
To wall outlet
TO
UR
CE
P
C
C
O
N
TR
O
L
SO
STANDBY
S
V
ID
E
O
V
ID
E
O
A
U
D
IO
M
O
U
S
E
Lit amber
R
G
B
Firmly plug in all the way.
2 Switch on the projector power
This indicator is also lit green in Eco-mode.
Press the STANDBY button.
STANDBY
(button on main unit)
The first time the power is switched on after purchase, [Menu
Language Select] will be displayed. See Page E-24 for information about language selection.
• When the power is turned on, the STANDBY indicator starts
flashing green, then stops flashing after about 60 seconds. If
the STATUS indicator lights green at this time, the lamp mode
is set to “Eco”. See E-30 and 55 for instructions on selecting.
• If the power does not come on, see “When the STATUS Indicator is Lit or Flashing” on Page E-61.
If the “Password” input window is displayed: See E-38.
A password is set for this projector.
The projector cannot be used unless the correct password is input.
To turn off the power: See E-25.
The projector is now capable of regular projection.
STATUS
STATUS
STATUS
STANDBY
STANDBY
STANDBY
Flashing green
(Approximately 60
seconds)
Lit amber
Lit green
Power is on
STANDBY
STANDBY
MENU
LASER
ENTER
RGB
RGB
VIDEO
AUTO
VIDEO
MENU
CANCEL
QUICK
Q
QUICK
Q
FREEZE
MUTE
ECO
1
2
3
AUTO
4
ASPECT
3 Switch on the power of the connected equipment
Note:
• When the power plug will be unplugged from the power outlet, please place the projector near the power outlet so that it may be reached
easily.
• Press the STANDBY button after the STANDBY indicator is lit in amber.
• The included power cable is exclusively for use with the U5-632/U5-532/U5-512. Never use it with other products.
E-23
Power Cable Connections and Switching the Power On/Off
When [Menu Language Select] is Displayed Upon Switching On the Power
The first time the power is switched on after purchase, [Menu Language Select] will be displayed. Follow the procedure described below and select the display language of the projector.
If the image is blurred, turn the focus ring counterclockwise or clockwise to focus it. See Page E-27.
Cursor
1 Press the SELECT (왖왔) buttons of the Remote control and align the deep blue cursor with [English].
STANDBY
MENU
STANDBY
VIDEO
RGB
VIDEO
LASER
ENTER
RGB
CANCEL
AUTO
QUICK
Q
MENU
QUICK
Q
FREEZE
MUTE
ECO
1
2
3
AUTO
4
ASPECT
R-CLICK/
CANCEL
ENTER
VOL
KSTN
ZOOM
TIMER
FREEZE
TIMER
MUTE
1
2
VOL
ZOOM
3
4
2 Press the ENTER button to set.
This will set the language and [Menu Language Select] will close.
STANDBY
MENU
R-CLICK/
CANCEL
ENTER
ENTER
RGB
VIDEO
CANCEL
QUICK
FREEZE
TIMER
MUTE
Q
1
2
FREEZE
MUTE
ECO
AUTO
VOL
ZOOM
1
2
3
4
3
4
ASPECT
VOL
KSTN
ZOOM
TIMER
This completes the selection of the display language.
Caution:
[Menu Language Select] will not appear the next time the power is switched on.
Should a change of language become necessary, see “Language” on Page E-57.
E-24
Power Cable Connections and Switching the Power On/Off
Finishing
1 Switch off the power of the connected equipment
2 Switch off the power of the projector
Press the STANDBY button.
STANDBY
STANDBY
MENU
LASER
ENTER
RGB
RGB
VIDEO
AUTO
VIDEO
MENU
STANDBY
(button on main unit)
CANCEL
QUICK
Q
QUICK
Q
FREEZE
MUTE
ECO
1
2
3
AUTO
4
ASPECT
The [Power Off] display appears.
When the level gauge reaches maximum, the projection screen
will go off (in about 5 seconds) and the projector will enter the
power-off operation.
Note
* The operation can be cancelled by pressing a button other than
the STANDBY button.
* One more press of the STANDBY button will switch off the power.
Power Off
OK ?
The STANDBY indicator changes to flashing amber and lights a
steady amber after about 90 seconds (when the unit enters the
standby mode).
STATUS
STATUS
STATUS
STANDBY
STANDBY
STANDBY
Lit green
Flashing amber
(Approximately 90
seconds)
Lit amber
Standby mode
3 Unplug the power cable
Check that the STANDBY indicator is lit in amber and then
unplug the power cable.
The STANDBY indicator will go off when the power cable is unplugged.
Warrning
Do not unplug the power cable while the STANDBY indicator is flashing amber. Doing so may shorten the life of the lamp
or damage the projector.
E-25
Adjustment of the Projection Screen
Switch on the power of the connected equipment and make the adjustments with the video signal being input to the
projector.
Adjustment of the Projection Screen
1 Turn the zoom ring to adjust the screen size of the projection image.
Adjust the image to match the desired screen size. When outside of the adjustment range, move the projector to the rear or
forward.
Zoom ring
2 Adjust the projection image to the screen.
Check that the screen is set level and vertically.
(1) If the image is shifted to the left or right, move the main unit horizontally. (Align the center of the screen and the center of
the projector lens.)
(2) If the image is shifted vertically, move the image up or down with the adjuster. See “Making Adjustments with the Adjusters” on Page E-27.
(3) If the image is slanted, adjust by turning the right or left adjuster. See “Making Adjustments with the Adjusters” on Page E27.
(4) A projection image such as that illustrated in the diagram is the result of the projector not being perpendicular to the
screen. Set the projector so that it is pointing straight toward the screen.
(5) If the image shows keystone distortion, adjust using remote control or menu operations. See “Keystone” on Page E-31, 53.
(2)
(1)
(3)
(4)
(3)
(5)
E-26
(4)
Adjustment of the Projection Screen
3 Turn the focus ring and adjust the focus of the screen
Focus ring
Making Adjustments with the Adjusters
S
S
TA
N
D
B
Y
S
TA
N
D
B
Y
A
U
TO
S
O
U
R
C
E
(1)
S
TA
TU
Raising the projection image
While viewing the projection image, (1) press and hold
the front adjuster buttons located at the left and right and,
(2) raise the projector to align the image with the screen,
then release your fingers.
Turn the left and right front adjusters for fine adjustment.
Adjust so that there is no shaking of the projector.
(1)
(2)
Adjuster button
Lowering the projection image
Lower the front adjusters using the operation described
above.
To lower the projection screen further, raise the rear adjuster. Fine adjustments are made by turning the left and
right front adjusters. Make adjustments so that there is
no rattling.
ST
AT
US
AN
ST
DB
Y
AN
ST
DB
Y
AU
TO
UR
CE
R
G
B
S
V
ID
E
O
V
ID
E
O
A
U
D
IO
M
O
U
S
E
P
C
C
O
N
TR
O
L
SO
Note:
When the projector has a suspended or rear installation is used, the orientation of the projection will need to be changed.
Please see “Vertical Flip” on Page E-53.
E-27
General Operation
This section describes the use of direct operation with the main unit or remote control buttons.
For information about operation using the menu, see “Menu Operation Method” on Page E-40 and the various items on
Pages E-47 to E-60.
Input Selection
This operation selects the input signal to be projected.
STANDBY
Main unit operation: Press the SOURCE button.
(It will not function while the menu or the quick menu is displayed.)
AUTO
When Auto Source is On
Whenever the SOURCE button is pressed, the projector automatically selects
another source that has the next input signal.
SOURCE
When Auto Source is Off
The input selection condition used last time will be set.
Each press of the button moves the selection one step in the sequence of RGB →
VIDEO → S-VIDEO. Note that the various input signals will become the signal
type set with [Input Format] See“Input Format” on page E-56.
Remote control operation: Press the desired input selection button.
RGB button ........ Switches the RGB input.
VIDEO button ..... The input switches between VIDEO and S-VIDEO each time the button is
pressed.
STANDBY
STANDBY
ENTER
RGB
VIDEO
RGB
AUTO
VIDEO
MENU
CANCEL
QUICK
Q
QUICK
Q
When Auto Source is On
When an input signal is not present at the selected source, the projector automatically selects the next source that has an input signal.
FREEZE
MUTE
ECO
1
2
3
AUTO
4
ASPECT
R-CLICK/
CANCEL
ENTER
VOL
When Auto Source is Off
The projector switches to the selected source regardless of whether an input signal is present.
MENU
LASER
FREEZE
KSTN
ZOOM
TIMER
TIMER
MUTE
1
2
VOL
ZOOM
3
4
Note:
* When you do not operate source selection, the projector will assume the input selection condition that was previously used.
* See “Auto Source” on Page E-54 for information about the Auto Source on and off
conditions.
Automatic Adjustment
This function automatically adjusts the position shift, screen size, vertical stripes,
and color infidelity of the projected analog RGB input signal.
Normally automatic adjustment is performed at the time of signal selection.
STANDBY
AUTO
Main unit operation/Remote control operation: Press the AUTO button.
(This will not function while the menu or the quick menu is displayed.)
A press of the AUTO button starts the automatic adjustment.
Note:
* If the display position is shifted, vertical lines appear on the picture, or the projection
is not good even after using automatic adjustment, please perform image adjustment
manually. See “Picture Adj. / Fine Picture / H Position / V Position” on Page E-47.
* When the image extends beyond the boundaries of the screen or is smaller than the
screen, set Aspect to “Auto”. See “Selection of Aspect Ratio” on Page E-29 and “Aspect” on Page E-52.
SOURCE
STANDBY
STANDBY
MENU
LASER
ENTER
RGB
RGB
VIDEO
AUTO
VIDEO
MENU
CANCEL
QUICK
Q
QUICK
Q
FREEZE
MUTE
ECO
1
2
3
AUTO
4
ASPECT
R-CLICK/
CANCEL
ENTER
VOL
FREEZE
E-28
MUTE
TIMER
KSTN
ZOOM
TIMER
General Operation
Selection of Aspect Ratio
Applicable Projector: U5-532/U5-112
This function selects horizontal and vertical picture proportions of the input
signal.
Press the ASPECT button while viewing the projected image and select the
aspect ratio.
Personal Computer Signal
Each press of the ASPECT button advances the selection one step in the sequence of Auto → Direct → Real, and then repeats.
For the U5-632
projector, these
operations are
possible using the
menus. The
operations are the
same. See E-52
[Aspect].
STANDBY
MENU
ENTER
RGB
VIDEO
CANCEL
QUICK
Q
FREEZE
MUTE
ECO
1
2
3
AUTO
4
ASPECT
VOL
KSTN
ZOOM
TIMER
Auto ............ Automatically enlarges or reduces the image to project a full screen in a ratio
of 4:3
Direct .......... Maintains the aspect ratio and projects a picture of the maximum displayable
size
Real ............ Projects the input signal without pixel conversion.
Input Signal
Auto
Direct
Real
The setting is higher
than the display resolution of the projector.
The setting is lower
than the display resolution of the projector.
Video Signals / Component Signals
Each press of the ASPECT button advances the selection one step in the sequence of Auto → Wide → Zoom, and then repeats.
Auto ............ While maintaining the aspect ratio, projects a full screen so that no portions extend beyond the boundaries of the screen. The top
and bottom of the 16:9 image becomes black.
Wide ........... Projects to fill the full width with the entire image at 16:9.
(This feature is used to project a squeezed image in a proper aspect ratio.)
Zoom .......... Projects only the 4:3 portion within 16:9 image to fill the screen.
(Portion that extend off screen is cut.)
Aspect ratio selection
Auto
Wide
Zoom
4:3 screen
16:9 screen
Note:
When selection has been made for the “Real” setting of the personal computer signal (i.e., when the input signal and the projector display
resolution are high) and the “Zoom” setting of the video signal, pressing the SELECT (왖왔왗왘) buttons on the remote control will permit
movement of the display position. Note that there will not be any movement when the menu or the quick menu is displayed.
E-29
General Operation
Freezing a Moving Picture
This function is used to stop and view a moving picture. Note that the input
image continues to advance even though the picture there is a still picture
condition.
STANDBY
STANDBY
ENTER
RGB
VIDEO
RGB
AUTO
VIDEO
A press of the FREEZE button changes the screen to a still picture. A
further press returns the screen to a moving picture.
MENU
LASER
MENU
CANCEL
QUICK
Q
QUICK
Q
FREEZE
MUTE
ECO
1
2
3
AUTO
4
ASPECT
R-CLICK/
CANCEL
ENTER
VOL
FREEZE
KSTN
ZOOM
TIMER
TIMER
MUTE
1
2
VOL
ZOOM
3
4
Cancelling Video and Audio Temporarily
This function is used to cancel the video and audio at the same time.
STANDBY
STANDBY
A press of the MUTE button will blank the picture and the sound, and
the screen will take on the background color that has been set.
Another press will cause a return to the original conditions.
MENU
LASER
ENTER
RGB
VIDEO
RGB
AUTO
VIDEO
MENU
CANCEL
QUICK
Q
QUICK
Q
FREEZE
MUTE
ECO
1
2
3
AUTO
4
ASPECT
R-CLICK/
CANCEL
ENTER
VOL
FREEZE
Lamp Mode
KSTN
ZOOM
TIMER
TIMER
MUTE
1
2
VOL
ZOOM
3
4
Applicable Projector: U5-532/U5-512
Use this if the picture is projected on a small screen and the picture
is too bright or when projecting images in dark rooms.
STATUS indicator
Pressing the ECO button will set the lamp mode.
STATUS
Eco (STATUS indicator is lit green)
Lamp brightness is set to 80% and the lamp life is extended.
STANDBY
Normal (STATUS indicator is off)
Lamp brightness is set to 100% and the screen is bright.
For the U5-632
projector, these
operations are
possible using the
menus. The
operations are the
same. See E-55
[Lamp Mode].
Note:
Frequent switching this mode can degrade the lamp.
STANDBY
VIDEO
CANCEL
QUICK
Q
FREEZE
MUTE
ECO
1
2
3
AUTO
4
ASPECT
VOL
E-30
MENU
ENTER
RGB
KSTN
ZOOM
TIMER
General Operation
Keystone
Applicable Projector: U5-532/U5-512
Use this to adjust for trapezoidal (keystone) distortion of the projected image.
STANDBY
MENU
ENTER
RGB
Adjustment Method
(1) Press the 왖 or 왔 KSTN button to make the left and right sides
parallel.
The keystone adjustment display appears when one of the buttons is
pressed.
VIDEO
QUICK
CANCEL
Q
(2)
FREEZE
MUTE
ECO
1
2
3
AUTO
4
ASPECT
VOL
KSTN
ZOOM
TIMER
(1)
Press the 왔 button.
For the U5-632 projector,
these operations are
possible using the menu.
The operations are the
same. See E-39, 53.
Press the 왖 button.
(2) Press the CANCEL button to immediately close the display.
The display will close when there has not been an operation in about
10 seconds.
Note:
* Keystone adjustment values can be saved. See “Keystone Save” on Page
E-53.
* Screen examples have been drawn in an exaggerated style for the purpose
of description.
* Please note that depending on the projected picture and the projection conditions, it may not be possible to eliminate keystone distortion completely.
Adjustment of the Volume
This function adjusts the volume of the built-in speaker.
STANDBY
STANDBY
(1) Press the 왖 or 왔 VOL button to adjust the volume.
The volume adjustment display appears when one of the buttons is
pressed.
MENU
LASER
ENTER
RGB
VIDEO
RGB
AUTO
VIDEO
MENU
QUICK
CANCEL
Q
QUICK
Q
(2)
FREEZE
MUTE
ECO
AUTO
1
2
3
4
VOL
KSTN
ZOOM
ASPECT
R-CLICK/
CANCEL
ENTER
The 왖 button increases the volume and the 왔 button decreases the
volume.
(2) Press the CANCEL button to immediately close the display.
The display will close when there has not been an operation in about
10 seconds.
Note:
* Adjustment of the volume will not produce any sound unless an image is
being projected.
* Please make connections to the AUDIO connectors of the projector with the
supplied audio cable.
E-31
(2)
FREEZE
TIMER
MUTE
1
2
VOL
ZOOM
3
4
(1)
(1)
TIMER
General Operation
Enlargement of the Image and Video Movement
This function digitally enlarges the personal computer image and video
image.
STANDBY
VIDEO
RGB
(1) Press the ZOOM button to enlarge the image.
The zoom display appears when the ZOOM button is pressed.
LASER
AUTO
MENU
QUICK
Q
(2)
R-CLICK/
CANCEL
ENTER
Each press of the 왖 button enlarges the image and each press of the
왔 button makes the image smaller (returning it to 1:1).
Zoom
0
(No enlargement)
Zoom
FREEZE
1
2
VOL
ZOOM
3
4
(Approximately 2 times enlargement)
STANDBY
VIDEO
(2) Pressing the SELECT (왖왔왗왘) buttons on the remote control at
the time of the zoom operation will cause the display position to
move.
(There will not be any movement when zoom is at 0.)
21
(Approximately 2 times enlargement)
Zoom
(1)
21
MENU
ENTER
RGB
Zoom
(3)
TIMER
MUTE
CANCEL
QUICK
(2)
Q
(3)
FREEZE
MUTE
ECO
AUTO
1
2
3
4
VOL
KSTN
ZOOM
ASPECT
TIMER
(1)
21
(Movement)
(3) Press the CANCEL button to immediately close the display.
The display will close when there has not been an operation in about
10 seconds.
Note:
After magnifying the image, be sure to use the ZOOM button to bring the gauge
value back to “0”.
The image can also be moved in the following circumstances.
•
•
When “Aspect” is set to “Real” by the signal of the personal computer, and the input resolution is higher than the display
resolution of the projector.
When “Aspect” is set to “Zoom” by the video signal.
Note:
* Zoom and image movement functions are cancelled when the input is switched.
* The greater the zoom enlargement, the less distinct the image will appear. The reason for this is that the dots are being digitally corrected
so that they are not conspicuous.
* Movement of the screen will not be possible when the menu screen is being displayed.
E-32
General Operation
Using the Presentation Timer
The presentation is given while checking the timer displayed
on the screen.
The gauge display allows the remaining time to be known at
a glance.
STANDBY
LASER
VIDEO
RGB
AUTO
MENU
(1) Press the TIMER button to show the settings display.
The display will close when an operation has not been made
for about 10 seconds.
QUICK
Q
(2)
R-CLICK/
CANCEL
ENTER
CANCEL button
(3)
FREEZE
TIMER
MUTE
(1)
[Timer settings display]
1
2
VOL
ZOOM
3
4
Press the CANCEL button to close the display immediately.
(2) Use the 왗 and 왘 SELECT buttons to set the time.
The setting contents are “Off” and from 10 to 60 minutes (in
10-minute intervals)
Settings can also be made with the SELECT (왗왘) buttons.
STANDBY
(2)
CANCEL button
(3)
(3) Press the ENTER button and start the timer.
• The display of the timer setting will close, the display of the
timer will appear and simultaneously the timer will start.
MENU
ENTER
RGB
VIDEO
CANCEL
QUICK
Q
FREEZE
MUTE
ECO
1
2
3
AUTO
4
ASPECT
VOL
KSTN
ZOOM
TIMER
(1)
Gauge (Blue)
[Timer Display]
The blue gauge indicates the remaining time. When the
gauge disappears,the time is up.
The gauge continues to be displayed when the timer is
stopped.
When the remaining time is
“0” (Gray)
• Press the ENTER button to restart the timer. The timer will
start with the same time setting.
• Press the CANCEL button to close the timer display. The
timer setting will return to “Off”.
Moving the Position of the Timer Display
The SELECT (왖왔왗왘) buttons on the remote control permit movement within the movable range of the timer display.
Movable Range of the Timer Display
Note:
* The timer display will be closed while the menu or the quick menu is displayed, and while a message is displayed; however, the timer will
still be operating at such times. Also, the timer will not be displayed unless a signal is being input.
* While the presentation timer is being displayed, screen movement will not be possible in the zoom mode.
E-33
General Operation
Using the Laser Pointer
Applicable Projector: U5-632
The remote control unit’s laser pointer can be used to point to the section currently being explained, making presentations more effective.
CAUTION
Do not look at the laser pointer’s light source.
Be sure to heed the following. Pointing the laser beam at
the eyes could lead to reduced vision or vision impairment.
• Never look at the laser pointer’s light source.
• Do not point the laser beam at people.
• Do not let children use the laser pointer.
This label is located on the side of the remote control.
Operation
The red laser beam is emitted from the tip of the remote control
unit while the LASER button is pressed in. Point the remote control unit’s transmitter in the direction you want to indicate.
The laser beam turns off when you release your finger from the
LASER button.
S
TA
N
D
B
Y
R
G
B
LA
E
O
S
U
E
N
ID
E
V
M
R
A
U
TO
Q
U
K
N
Q
IC
E
TE
R
FR
EE
ZE
/
K
L
LIC E
-C C
R AN
C
M
U
TE
TIM
1
E
R
V
O
L
2
3
ZO
O
M
4
LASER
E-34
General Operation
Performing Mouse Operations on the Computer
with the Remote Control Unit
Applicable Projector: U5-632
When a computer and the projector are connected, mouse operations can be performed on the computer using the
projector’s remote control unit. When projecting images from the computer, the projector can be operated and mouse
operations on the computer performed with the same remote control unit, making for efficient presentations.
Connecting the computer and projector
Use the USB cable included with the projector to connect the computer’s USB (type A) connector to the projector’s MOUSE
connector.
Note:
* Be sure to plug the cable in securely.
* Depending on the type of connection, the computer’s operating system, etc., it may be necessary to change settings or restart the computer after making the connections.
USB connector
USB cable (mini B to A type) (Supplied item)
Functions of the mouse function buttons
When operating, point the remote control unit’s transmitter towards the remote control sensor on the projector.
L-CLICK button (on back)
Press this to perform the left-click operation.
STANDBY
LASER
VIDEO
RGB
AUTO
MENU
QUICK
JOG buttons
These move the computer’s pointer in the corresponding direction.
Q
R-CLICK button
Press this to perform the right-click operation.
R-CLICK/
CANCEL
ENTER
FREEZE
TIMER
MUTE
1
2
VOL
ZOOM
3
4
INFORMATION
The R-CLICK/CANCEL button is used for both the projector and mouse function. When the R-CLICK/CANCEL button is pressed while a menu is open, the
menu is closed.
Note:
Connections with USB Cables
* For PC/AT compatible computers, this function cannot be used with operating systems other than Windows 98SE, Me, 2000 and XP. For
Macintosh computers, this function cannot be used with operating systems other than OS 9 and later.
* When the cable is disconnected and then reconnected to the USB port of the personal computer or the MOUSE connector of the projector,
allow at least 5 seconds before reconnecting. Do not repeatedly disconnect and reconnect the cable in a momentary fashion. The personal
computer may not be able to correctly identify the projector as a result.
* The supplied USB cable is a dedicated cable for this projector. There is no guaranty that it will work in connections with other USB
equipment.
* This function may not work with some computers.
E-35
General Operation
Controlling the Projector from a Computer
Applicable Projector: U5-632/U5-532
Use the control connector if the projector cannot be operated with the remote control unit, for example when it is
suspended from the ceiling.
Connecting the computer and projector
Use a commercially available serial cable (D-Sub 9-pin, straight) to connect the computer’s RS-232C connector to the projector’s
control connector (PC CONTROL).
RS-232C
connector
Serial cable (D-Sub 9-pin, straight) (commercially available)
Note:
* This function may not work with some computers.
* Specialized knowledge is required to use the control connector. Consult a specialist, such as the person suspending the projector from the
ceiling.
Use as a High-Brightness Monochrome Projector
Applicable Projector: U5-632
Data comprising a lot of black-and-white content such as documents and spreadsheets can be projected as a
highbrightness black-and-white image. While being projected, the image can be switched between black-and-white and
color.
Switching between color and black-and-white is done using the menus. For instructions on operating the menus, see “Menu
Operation Method” on E-40.
Select “Color B/W Switching” in the “Setup” menu, then
press one of the 왗 or 왘 SELECT buttons on the remote
control unit to select “B/W”.
When selected, the image switches to a high brightness blackand-white image.
Select “Color” to switch back to a color image.
Press the CANCEL button on the remote control unit to close
the menu display.
E-36
General Operation
Protecting the Projector with the Security Lock
A password can be registered and the security lock set in order to protect the projector from unauthorized use.
Registering the password
The password is registered using the menus. For instructions on operating the menus, see “Menu Operations” on E-40.
(1) Select “Security Lock” in the “Option” menu and set it to “Enable”.
The menu closes and the password registration display appears.
(2) Use the number buttons (1 to 4) to register the password.
Be sure to input a 4-digit number.
Example: Registering the password “2441”
(1) Press number button “2”. An “ ” (asterisk) appears at the first place.
Next press number buttons “4”, “4” and “1” in that order. Asterisks appear
in all four places.
*
STANDBY
STANDBY
MENU
LASER
ENTER
RGB
VIDEO
RGB
AUTO
VIDEO
MENU
QUICK
CANCEL
Q
QUICK
Q
FREEZE
MUTE
ECO
1
2
3
AUTO
4
ASPECT
R-CLICK/
CANCEL
ENTER
VOL
FREEZE
(2) Input the password again. An “ ” appears when the input number
matches. If there is a mistake, the asterisks turn off. Start over from step
(1) above.
If the password matches, the password registration display closes.
*
Note:
To cancel the number you have input, press the CANCEL button.
The asterisks disappear and the display returns to the input standby mode at the first
place.
To cancel the password registration mode, press the CANCEL button again. The “Password” display turns off.
This completes password registration.
The “Password” input display appears the next time the power is turned
on.
Note:
The numbers you have input are not displayed. Be sure to write down the password
and store it in a safe place.
E-37
TIMER
MUTE
1
2
VOL
ZOOM
3
4
KSTN
ZOOM
TIMER
General Operation
If the password input display appears when the power is turned on
When a password has been registered, the “Password” input window appears on the projected image when the power is turned
on. The projector continues projecting this image until the correct password is input. At this time, only the STANDBY button (power
off) works. Use the procedure described below to input the registered password. For instructions on registering the password, see
E-37.
Input the password using the number buttons (1 to 4).
Be sure to input the registered 4-digit number.
Example: To input the password “2441”
Press number button “2”. An “ ” (asterisk) appears at the first place.
*
Next press number buttons “4”, “4” and “1” in that order. Asterisks appear in all
four places.
If the password matches, the window turns off and the projector can be used
normally.
[Password input window]
Canceling the password/Changing the password
The password is canceled and changed using the menus. For instructions on operating the menus, see “Menu Operations” on
E-40.
Canceling the password
Select “Security Lock” in the “Option” menu and set it to “Disable”.
This clears the password and disables the security lock.
The password input display no longer appears when the power is turned on.
Changing the password
After setting “Security Lock” to “Disable” as described above, set it back to “Enable”. The menu closes and the password registration display appears.
Register the new password. See “Registering the password” on E-37.
E-38
General Operation
Using the Quick Menu
This function permits frequently used adjustments to be performed quickly.
Note that the Quick Menu will not be displayed unless the signal of the
connected equipment is input. Please select the input that you wish to
adjust.
STANDBY
LASER
VIDEO
RGB
AUTO
MENU
QUICK
(1)
Q
(1) A press of the QUICK MENU button brings up the quick adjustment display.
Further presses cause the adjustment display to change in sequence.
The adjustment display can be selected with use of either the SELECT
왖 or 왔 button.
(2)
R-CLICK/
CANCEL
ENTER
(3)
FREEZE
(2) Press the cursor 왗 or 왘 button to make the adjustment.
TIMER
MUTE
1
2
VOL
ZOOM
3
4
(3) To close the display immediately, press the CANCEL button.
In the absence of operations for a period of about 10 seconds, the
display will close automatically.
STANDBY
MENU
ENTER
RGB
VIDEO
CANCEL
QUICK
Q
FREEZE
MUTE
ECO
1
2
3
AUTO
4
ASPECT
VOL
KSTN
ZOOM
Content of Adjustments and Settings
Example: Brightness adjustment display
Display Item
Adjustment/Setting
Brightness
Adjusts the brightness of the image. See page E-47.
Contrast
Adjusts the contrast of the image. See page E-47.
Keystone
Corrects (vertical) keystone distortion of the screen. See page E-31.
Volume
This function adjusts the volume of the built-in speaker. See page E-31.
Presentation timer
Sets the time of the presentation timer. See page E-33.
Quick Color Adj.
Select the preset color mode. See page E-49
E-39
TIMER
(2)
(1)
(3)
Menu Operation Method
• This section describes only the menu operation method. Please see this item should you need information while
performing menu operations.
• For information about a menu function, adjustment, or setting, please see one of the pages containing such descriptions.
• Adjustments and settings are made by projecting an image and adjusting to an optimum condition.
• The remote control should be pointed toward the remote control sensor of the projector and operated.
• To return the various items that have been changed via the menu to their standard values (i.e., default values at time
of shipping from the factory), see “Factory Default” on Page E-59. (Some items will not return to their initial values.)
• The adjustment/setting items and contents will differ depending on the input selection and the adjustment/setting
items that can be used with the input signal are displayed on the menu.
Names and functions of remote control unit buttons used for menu operations
STANDBY
VIDEO
RGB
MENU button
Used for menu display and menu closure.
LASER
AUTO
QUICK
MENU
Q
R-CLICK/
CANCEL
ENTER
FREEZE
CANCEL button
Used to return to menu name selection as well as to close
the menu (and the sub menu display).
TIMER
MUTE
1
2
VOL
ZOOM
3
4
STANDBY
ENTER button
Used to set the verification display.
MENU
MENU button
Used for menu display and menu closure.
ENTER
RGB
VIDEO
SELECT (왖왔왗왘) buttons
Used in the selection of menu names and item names as
well as in setting and adjusting the item contents.
QUICK
CANCEL
Q
FREEZE
MUTE
ECO
1
2
3
AUTO
4
ASPECT
VOL
KSTN
ZOOM
SELECT (왖왔왗왘) buttons
Used in the selection of menu names and item names as
well as in setting and adjusting the item contents.
ENTER button
Used to set the verification display.
TIMER
CANCEL button
Used to return to menu name selection as well as to close
the menu (and the sub menu display).
E-40
Menu Operation Method
Menu Screen Names and Functions
Menu Name
This is the title of the menu.
There is a change to the title screen
when the menu is selected.
The cursor moves to the selected
menu name.
Cursor (Deep Blue)
This permits setting/adjustment of the item
located at the cursor position.
Applicable Projector: U5-632
Not selectable for other models.
Item Name
This is the name of
the adjustment or
setting.
Icon: Pressing the ENTER
button displays the sub menu
or setting contents.
Adjustment Bar and Settings Contents
Adjustment Bar: The increases and decreases in bar length
express the adjustment condition.
Setting Contents: Displays the contents that have been set.
Sub menu
Adjustment Bar
Item Name
E-41
Settings Contents
Menu Operation Method
Performing Menu Operations
• Only “Setup”, “Options” and “Info.” can be selected when no signal is being input.
• The menu display will close if, after pressing a button, the next button operation is not made within 30 seconds.
• The adjustment and the setting values are stored even when the power is switched off or the plug is disconnected
from the power outlet.
(Note that some items are not stored.)
Preparation
Switch on the power of the connected equipment, start the play operation or another operation, and input
the signal to the projector.
Select the input that you wish to adjust.
The menu display of the description diagram depicts an example in which the “Keystone” item name is selected.
Menu Display
1
Press the MENU button to display the menu
STANDBY
STANDBY
MENU
LASER
ENTER
RGB
RGB
VIDEO
AUTO
VIDEO
CANCEL
QUICK
Q
QUICK
MENU
Q
FREEZE
MUTE
ECO
1
2
3
AUTO
4
ASPECT
R-CLICK/
CANCEL
ENTER
VOL
FREEZE
MUTE
KSTN
ZOOM
TIMER
TIMER
The menu name that existed when the menu was closed previously will be displayed.
Selection of the Menu Name
2
Press the SELECT (왗왘) button to select the menu name
STANDBY
STANDBY
MENU
LASER
ENTER
RGB
RGB
VIDEO
AUTO
VIDEO
MENU
CANCEL
QUICK
Q
QUICK
Q
FREEZE
MUTE
ECO
1
2
3
AUTO
4
ASPECT
R-CLICK/
CANCEL
ENTER
VOL
FREEZE
MUTE
KSTN
ZOOM
TIMER
TIMER
Each press of the SELECT 왘 button advances the selection one step in the sequence of “Color” → “View” → “Setup” →
“Option” → “Info.” → “Image”. Each press of the SELECT 왗 button causes a return of one step.
The cursor moves to the selected menu name.
Note:
Please check that the cursor of the item name has disappeared at the time of menu name selection.
Press the CANCEL button to make the cursor disappear.
E-42
Menu Operation Method
Displaying the Cursor
3
Press the 왔 SELECT button to display the item name selection cursor.
STANDBY
STANDBY
MENU
LASER
ENTER
RGB
VIDEO
RGB
AUTO
CANCEL
VIDEO
MENU
QUICK
Q
QUICK
Q
FREEZE
MUTE
ECO
1
2
3
AUTO
4
ASPECT
R-CLICK/
CANCEL
ENTER
VOL
FREEZE
KSTN
ZOOM
TIMER
This condition allows selection of the
item name.
TIMER
MUTE
Selection of the Item Name
4
Press the SELECT (왖왔) button to align the cursor with the item name
STANDBY
STANDBY
MENU
LASER
ENTER
RGB
VIDEO
RGB
AUTO
CANCEL
VIDEO
MENU
QUICK
Q
QUICK
Q
FREEZE
MUTE
ECO
1
2
3
AUTO
4
ASPECT
R-CLICK/
CANCEL
ENTER
VOL
FREEZE
KSTN
ZOOM
TIMER
TIMER
MUTE
Items for which the Icon Is Displayed
Press the ENTER button to display the submenu.
Press the SELECT (왖왔) button and align the cursor with the desired item name.
There are also some items for which the setting display or the verification display will appear. Please see the various item
descriptions.
R-CLICK/
CANCEL
ENTER
STANDBY
FREEZE
Sub menu
MENU
TIMER
MUTE
ENTER
RGB
VIDEO
1
2
VOL
ZOOM
3
4
CANCEL
QUICK
Q
FREEZE
MUTE
ECO
1
2
3
AUTO
4
ASPECT
VOL
KSTN
ZOOM
TIMER
Making Adjustments/Settings
5
Press the SELECT (왗왘) button and make the adjustment (or setting) while viewing the image
When a button is pressed, the image will also change.
STANDBY
STANDBY
MENU
LASER
ENTER
RGB
RGB
VIDEO
AUTO
VIDEO
MENU
CANCEL
QUICK
Q
QUICK
Q
FREEZE
MUTE
ECO
1
2
3
AUTO
4
ASPECT
R-CLICK/
CANCEL
ENTER
VOL
FREEZE
MUTE
KSTN
ZOOM
TIMER
TIMER
Adjustment display: Each press of the button results in a change of 1 point and continued presses cause changes to
proceed in order.
Setting display: The setting contents display changes with each press of the button.
E-43
Menu Operation Method
Closing the Menu
6
Press the MENU button and close the menu display
STANDBY
STANDBY
MENU
LASER
ENTER
RGB
RGB
VIDEO
AUTO
VIDEO
CANCEL
QUICK
Q
QUICK
MENU
Q
FREEZE
MUTE
ECO
1
2
3
AUTO
4
ASPECT
R-CLICK/
CANCEL
ENTER
VOL
FREEZE
MUTE
KSTN
ZOOM
TIMER
TIMER
Selecting Another Menu Name with Remote Control Operation
When a sub menu is displayed, press the CANCEL button and close the sub menu.
Press the CANCEL button again to turn off the item name
cursor.
STANDBY
STANDBY
MENU
LASER
ENTER
RGB
RGB
VIDEO
AUTO
VIDEO
MENU
CANCEL
QUICK
Q
QUICK
Q
FREEZE
MUTE
ECO
1
2
3
AUTO
4
ASPECT
R-CLICK/
CANCEL
ENTER
VOL
FREEZE
MUTE
KSTN
ZOOM
TIMER
TIMER
Press the SELECT (왗왘) button and select the menu
name.
(Menu names cannot be selected when the item name
cursor is displayed.)
STANDBY
STANDBY
MENU
LASER
ENTER
RGB
RGB
VIDEO
AUTO
VIDEO
MENU
CANCEL
QUICK
Q
QUICK
Q
FREEZE
MUTE
ECO
1
2
3
AUTO
4
ASPECT
R-CLICK/
CANCEL
ENTER
VOL
FREEZE
MUTE
KSTN
ZOOM
TIMER
TIMER
Note:
A press of the QUICK button while the menu is displayed will close the menu and display the quick menu. A press of the MENU button while
the quick menu is displayed will close the quick menu and display the menu.
E-44
Menu Operation Method
List of Item Names Offering Input Selection and Adjustments/Settings
The item names that can be adjusted/set will differ depending on the input signal.
u
om t Si
gn
R pon al
G
B en
t
VI
D
E
S- O
VI
D
EO
[Example of Menu Display Items at the Time of Input Signal RGB Selection]
p
Sub Menu
Item Name
Item Name
Image
Brightness
嘷
嘷
嘷
嘷
E-47
Contrast
嘷
嘷
嘷
嘷
E-47
嘷
嘷
E-47
嘷
嘷
E-47
嘷
嘷
E-47
In
Menu name
C
Reference
Page
Color
嘷
Tint
Sharpness
Picture Adj.
嘷
E-47
Fine Picture
嘷
E-48
H Position
嘷
E-48
V Position
嘷
嘷
Reset
Color
E-48
嘷
嘷
嘷
Quick Color Adj.
E-48
E-49
Gamma
嘷
嘷
嘷
嘷
E-49
Color Temp.
嘷
嘷
嘷
嘷
E-50
White
嘷
嘷
嘷
嘷
E-50
Color Space
嘷
E-50
嘷
White Balance
View
嘷
E-51
Aspect
嘷
嘷
嘷
嘷
E-52
Filter
嘷
嘷
嘷
嘷
E-52
Vertical Flip
嘷
嘷
嘷
嘷
E-53
Horizontal Flip
嘷
嘷
嘷
嘷
E-53
Keystone
嘷
嘷
嘷
嘷
E-53
Keystone Save
嘷
嘷
嘷
嘷
E-53
“Tint” can be adjusted only at the time of NTSC composite/S signal input.
E-45
Color B/W Switching
Info.
Reference
Page
嘷
嘷
嘷
嘷
E-54
Auto Source
嘷
嘷
嘷
嘷
E-54
Auto Power Off
嘷
嘷
嘷
嘷
E-54
Memu Position
嘷
嘷
嘷
嘷
E-55
Lamp Mode
嘷
嘷
嘷
嘷
E-55
RGB
嘷
嘷
嘷
嘷
E-56
Video
嘷
嘷
嘷
嘷
E-56
S-Video
嘷
嘷
嘷
嘷
E-56
Presentation Timer
嘷
嘷
嘷
嘷
E-56
Language
嘷
嘷
嘷
嘷
E-57
On Screen
嘷
嘷
嘷
嘷
E-57
Background
嘷
嘷
嘷
嘷
E-57
Startup Screen
嘷
嘷
嘷
嘷
E-58
Security Lock
嘷
嘷
嘷
嘷
E-58
Status
嘷
嘷
嘷
嘷
E-59
Factory Default
嘷
嘷
嘷
嘷
E-59
Lamp Timer Reset
嘷
嘷
嘷
嘷
E-59
Resolution
嘷
嘷
嘷
嘷
E-60
Frequency
嘷
嘷
嘷
嘷
E-60
Lamp Timer
嘷
嘷
嘷
嘷
E-60
Input Format
Option
p
Setup
Sub Menu
Item Name
In
Item Name
C
Menu name
u
om t Si
gn
R pon al
G
B en
t
VI
D
EO
SVI
D
EO
Menu Operation Method
Applicable Projector: U5-632
E-46
Image
• Perform this operation while projecting the picture for which the adjustment/setting will be made.
• Select the menu name “Image”.
See “Menu Operation Method” on Page E-40 for information about performing menu operations. The item name display will
differ depending on the input signal. See “List of Item Names Offering Input Selection and Adjustments/Settings” on Page E-45.
Brightness / Contrast / Color / Tint / Sharpness
Picture qualities such as brightness and contrast will change depending on the whether the room is bright or dark. Please adjust to suit your
preference.
Select the desired item name and then adjust with the SELECT (왗왘) buttons.
Item Name
Brightness
Contrast
Color
Tint
Sharpness
SELECT 䊴 Button
Darker
Less contrast
Less dense color
More red
Softer image
SELECT 䊳 Button
Brighter
More contrast
Denser color
More green
Sharper image
Note:
* The adjustment values of the adjustable items are stored according to input source.
* “Tint” can only be adjusted when inputting NTSC composite/S-Video signals or
component signals.
Picture Adj. / Fine Picture / H Position / V Position
Usually, automatic adjustment is performed at the time of signal selection, but when automatic adjustment is not effective, these adjustments
can be performed.
Note:
When the image extends beyond the boundaries of the screen or is smaller than the
screen, check that the “View” → “Aspect” setting is set to “Auto”. See “Aspect” on
Page E-52.
Picture Adj. (Picture Adjustment)
Adjust this when bright and dark vertical bands appear on the screen.
Select the “Picture Adj.” item name and adjust with the SELECT (왗왘) buttons
so that the vertical bands disappear and brightness becomes uniform across
the screen.
E-47
Image
Fine Picture
Adjust this when the picture shows a lack of color fidelity or flickering.
Select the “Fine Picture” item name and adjust with the SELECT (왗왘) buttons so that the lack of color fidelity or the flickering disappears.
H Position
Adjust this when the picture is shifted to the left or right.
Select the “H Position” item name and adjust with the SELECT (왗왘) buttons.
V Position
Adjust this when the picture is shifted up or down.
Select the “V Position” item name and adjust with the SELECT (왗왘) buttons.
Reset
This function resets (i.e., returns to the standard settings) the adjustment/setting value of the “Image” menu name.
A press of the ENTER button forces the reset.
Note:
* The item name “Fine Picture” at the time of RGB input will not be reset.
* “Reset” of the menu name “Image” can be reset for each input source.
* To reset the adjustments/settings of all the menu items (while noting that there are some items that cannot be reset), see “Factory Default”
on Page E-59.
E-48
Color
• Do the following operation while displaying the image you want to adjust or set.
• Select the menu name “Color”.
See “Menu Operation Method” on Page E-40 for information about performing menu operations. The item name display will
differ depending on the input signal. See “List of Item Names Offering Input Selection and Adjustments/Settings” on Pages
E-45.
Quick Color Adj.
Select the preset color mode.
Select the “Quick Color Adj.” item name and select the setting contents with
the SELECT (왗왘) buttons.
Picture ........ Select this to prioritize color.
Standard ..... This is the standard selection. (Default setting)
Dynamic ..... Select this for prioritizing brightness.
* When “Picture”, “Standard” or “Dynamic” is selected, the “Gamma”, “Color Temp.” and “White”
adjustment items are displayed in gray and cannot be selected or adjusted.
Custom ....... “Gamma”, “Color Temp.” and “White” adjustment items can be selected
and adjusted
* The selected values for the different adjustment items are stored in the memory so the desired
color adjustments can be set.
Gamma
Gamma corrects the proportion of change of the dark portions from the
bright portions of the input signal.
Set this to reproduce natural color tone or to distinctly project a personal computer picture in a bright conference room.
Select the “Gamma” item name and select the setting contents with the SELECT
(왗왘) buttons.
Normal ....... Correction with standard settings
Natural ........ Corrects for natural color tones
Real ............ Corrects with emphasis on brightness
Note:
When “Picture”, “Standard” or “Dynamic” is selected for “Quick Color Adj.”, the
“Gamma” adjustment item is displayed in gray and cannot be selected or adjusted.
E-49
Color
Color Temp.
The screen color is affected by the color of the illumination and other
extraneous light.
This function adjusts the white, which is the reference color for video
equipment, and improves the quality of color reproduction. Adjustment
can also be used to enhance skin colors.
Select the item name “Color Temp.” and select the setting contents with the
SELECT (왗왘) buttons.
Low ............
Medium ......
Normal .......
High ............
Produces warm whites (reddish)
Produces warm whites (yellowish)
Produces the white of sunlight
Produces cool whites (bluish)
Note:
When “Picture”, “Standard” or “Dynamic” is selected for “Quick Color Adj.”, the
“Color Temp.” adjustment item is displayed in gray and cannot be selected or adjusted. See “Quick Color Adj.” on E-49.
White
When projecting, this function is used to emphasize the whites of text or
diagrams on the personal computer.
Select the item name “White” and use the SELECT (왗왘) buttons to select the
setting contents.
Select the desired degree of white from among “Low”, “Medium”, and “High”.
Note:
When “Picture”, “Standard” or “Dynamic” is selected for “Quick Color Adj.”, the
“White” adjustment item is displayed in gray and cannot be selected or adjusted.
See “Quick Color Adj.” on E-49.
Color Space
Set this function when a component signal (YPbPr) is projected and the
image is extremely red or extremely green.
Select the item name “Color Space” and use the SELECT (왗왘) buttons to
select a color space setting that provides a normal image.
Selection contents at the time of YPbPr input
BT.709, SMPTE240
Note:
* When the component signal undergoes conversion processing to red, green,
and blue which express the image of the projector, the correct color cannot be
reproduced unless a system compliant with the color difference conversion system of the input signal is used. Color Space serves to make this selection.
* The color space can only be adjusted with high definition TVs.
E-50
Color
White Balance
This function automatically adjusts the black level and the white level of
the analog RGB input signal to suit the personal computer.
1
Select the item name [White Balance] and press the ENTER button.
The display will change to [Input Black Signal].
2
The screen background color of the connected personal computer
will be set to black.
3. Press the ENTER button. The display will change to [Adjusting Black]
and the black level will be adjusted.
4
The adjustment of the black level is completed and the display
changes to [Input White Signal].
5
The screen background color of the connected personal computer
will be set to white.
6
Press the ENTER button. The display will change to [Adjusting White]
and the white level will be adjusted.
[White balance complete] is displayed for a while and the adjustment is
completed.
E-51
View
• Perform this operation while projecting the picture for which the adjustment/setting will be made.
• Select the menu name “View”.
See “Menu Operation Method” on Page E-40 for information about performing menu operations. The item name display will
differ depending on the input signal. See “List of Item Names Offering Input Selection and Adjustments/Settings” on Page E-45.
Aspect
This function sets the horizontal and vertical picture proportions of the
input signal.
Select the item name “Aspect” and select the setting contents with the SELECT
(왗왘) buttons.
Personal Computer Signal
Auto ............ Automatically enlarges or reduces the image to project a full screen in a
ratio of 4:3
Direct .......... Maintains the aspect ratio and projects a picture of the maximum
displayable size
Real ............ Projects the input signal without pixel conversion
Video Signals
Auto ............ While maintaining the aspect ratio, projects a full screen so that no portions extend beyond the boundaries of the screen. The top and bottom of
the 16:9 image becomes black.
Wide ........... Projects to fill the full width with the entire image at 16:9.
(This feature is used to project a squeezed image in a proper aspect ratio.)
Zoom .......... Projects only the 4:3 portion within 16:9 image to fill the screen.
(Portion that extend off screen is cut.)
See “Selection of Aspect Ratio” on Page E-29 for diagrams of projection screen
images that correspond to the input signals.
Note:
Please note that using this monitor for the purpose of commercial gain or the attraction of public attention in a venue such as a coffee shop or hotel and projecting
a 4:3 screen in wide mode or leaving a squeezed screen as a compressed image
raises concern about the infringement of the copyright holder’s rights which are
protected by copyright law.
Filter
This function sets the sharpness when the input signal is adjusted to
the resolution of the projector and enlarged or reduced.
Select the item name “Filter” and select the setting contents with the SELECT
(왗왘) buttons.
Smaller numerical values result in a sharper picture and larger values result in
a softer picture. Please select your desired setting value.
E-52
View
Vertical Flip
In selecting the method of projecting to the screen, these functions are
set when the projector is in a suspended or a rear screen installation.
Select the item name “Vertical Flip” or “Horizontal Flip” and select the setting
contents with the SELECT (왗왘) buttons.
“Vertical Flip” Off
“Horizontal Flip” Off
“Vertical Flip” Off
“Horizontal Flip” On
“Vertical Flip” On
“Horizontal Flip” On
Keystone
Keystone distortion will occur when the projector and screen are on an
angle (in the vertical orientation). This function is used to correct this
distortion.
Select the item name “Keystone” and correct the keystone distortion using the
SELECT (왗왘) buttons.
Press the 왗 button.
Press the 왘 button.
Note:
* The menus and other on-screen displays cannot be adjusted.
* Please note that depending on the projected picture and the projection conditions, it may not be possible to eliminate keystone distortion completely.
Keystone Save
This function is used to save the keystone adjustment values.
Setting Keystone Save to on will set the previous keystone adjustment values
when projecting after the power cable has been disconnected and then reconnected.
Select the item name “Keystone Save” and set with the SELECT (왗왘) buttons.
Off .............. The keystone adjustment values return to the initial values when the power
cable is unplugged.
On ............... The keystone adjustment values are retained in storage even when the
power cable has been unplugged.
Note:
Regardless of whether Keystone Save is set to “On” or “Off”, when projection is
from the standby condition, the picture is projected using the previous keystone
adjustment values.
E-53
“Vertical Flip” On
“Horizontal Flip” Off
Setup
• Select menu name “Setup”.
See “Menu Operation Method” on Page E-40 for information about performing menu operations. The item name display will
differ depending on the input signal. See “List of Item Names Offering Input Selection and Adjustments/Settings” on Page E-45.
Color B/W Switching
Applicable Projector: U5-632
Documents, spreadsheets or other mostly black and white data can be
projected with stronger brightness.
It is possible to switch between the black/white and color mode while an
image is being projected.
Select the “Color B/W Switching” item name, then use the 왗 and 왘 SELECT
buttons to select the desired setting.
Color ........... The color image projection mode is set.
B/W ............ The high brightness black/white image projection mode is set.
Auto Source
The Auto Source function automatically detects the input signal when
the power supply is switched on and when the input is switched.
Select the item name “Auto Source” and select the setting contents with the
SELECT (왗왘) buttons.
On ............... Switches on the automatic detection function
Off .............. Switches off the automatic detection function
Signal Detection Order When On
The sequence of RGB → VIDEO → S-VIDEO is searched repeatedly.
When a signal is detected, the search is stopped and the image is projected.
Auto Power Off
This function switches off the projector power automatically when the
input of the projector enters a no-signal condition.
Select item name “Auto Power Off” and select the setting contents with the
SELECT (왗왘) buttons.
On ............... The power is switched off when there is no signal.
Off .............. The power is not switch off even when there is no signal.
Operation when Function is On
• The “No Signal Power Off” display appears when a no-signal condition continues for approximately 10 seconds. The power is switched off about 5
minutes after this.
• If a signal is input during the appearance of the display and an operation
button other than the STANDBY button is pressed, the display is closed and
the function is cancelled.
Note:
Some video decks and other equipment output a blue background or other video when playback ends. When this happens, a signal is being
input to the projector and Auto Power Off is not activated.
E-54
Setup
Menu Position
This function sets the display position of the menu.
Select item name “Menu Position” and select the setting contents with the
SELECT (왗왘) buttons.
............. Displays on the left side
............. Displays on the right side
Lamp Mode
Use this if the picture is projected on a small screen and the picture is
too bright or when projecting images in dark rooms.
Select the item name “Lamp Mode” and select the setting contents with the
SELECT (왗왘) buttons.
Eco ............. The lamp brightness is set to 80% and the lamp life is extended.
(STATUS indicator is green)
Normal ....... The lamp brightness is set to 100% and the screen is bright.
(STATUS indicator is off)
Note:
Frequent switching this mode can degrade the lamp.
STATUS Indicator
STATUS
STANDBY
E-55
Setup
Input Format
This function is used in setting the input signals of the input connectors.
Normally, this should be set to Auto. When identification is not possible
with Auto, make the setting.
Select the item name “Input Format”, press the ENTER button, and the sub
menu will open.
Select the connector that is to be changed, and select the setting contents
with the SELECT (왗왘) buttons.
[RGB]
This is the signal setting for the RGB connector.
Auto ............ Automatically identifies the signal.
RGB ............ Analog RGB signal is set.
Component . Component signal is set.
[Video] and [S-Video]
[Video] is the color system setting for the VIDEO connector and [S-Video] is
the color system setting for the S-VIDEO connector.
Auto ............
NTSC ..........
NTSC 4.43 ..
PAL .............
PAL M .........
PAL N .........
PAL 60 ........
SECAM .......
Automatic identification.
Fixed to the NTSC system.
Fixed to the NTSC 4.43 system.
Fixed to the PAL system.
Fixed to the PAL M system.
Fixed to the PAL N system.
Fixed to the PAL 60 system.
Fixed to the SECAM system.
Presentation Timer
The presentation is given while checking the timer displayed on the
screen.
The gauge display allows the remaining time to be known at a glance.
Select the item name “Presentation Timer” and select the setting contents
with the SELECT (왗왘) buttons.
Setting contents: Off, 10 min., 20 min., 30 min., 40 min., 50 min., 60 min.
To start the timer...
Press the MENU button and open the menu.
The timer display will appear at the lower right and the timer will start.
See “Using the Presentation Timer” on Page E-33 for details.
E-56
Option
• Select menu name “Option”.
See “Menu Operation Method” on Page E-40 for information about performing menu operations. The item name display will
differ depending on the input signal. See “List of Item Names Offering Input Selection and Adjustments/Settings” on Page E-45.
Language
This function sets the language that is displayed on screen in
the messages and menu displays.
Select item name “Language” and press the ENTER button to open
the Language sub menu.
Select the language with the SELECT (왖왔) buttons.
On Screen
This function switches on/off the messages displayed with a black
frame such as the input signal information and the aspect ratio.
Select item name “On Screen” and select the setting contents with the
SELECT (왗왘) buttons.
On ............... The message is displayed.
Off .............. The message is not displayed.
Note:
Even when set to off, messages that are not in a black frame will be displayed.
Freeze
Example of a display when the
FREEZE button is pressed
Background
This function sets the screen color when the input source is nosignal.
Select item name “Background” and select the setting contents with
the SELECT (왗왘) buttons.
Blue ............ Sets a blue screen when there is no signal
Black ........... Sets a black screen when there is no signal
E-57
Option
Startup Screen
This is the selection of whether or not to display the logo screen
at startup time.
Select item name “On Screen” and select the setting contents with the
SELECT (왗왘) buttons.
Logo ........... Displays the logo.
Blank .......... Does not display the logo.
Note:
When “Logo” is selected at the startup screen, the “PLUS” logo is displayed.
Security Lock
A password can be registered and the security lock set in order
to prevent unauthorized use of the projector.
For instructions on using the security function, see “Protecting the
Projector with the Security Lock” on E-37.
Select item name “Security Lock” and select the setting contents with
the SELECT (왗왘) buttons.
Disable ....... The security lock is disabled.
The projector can be operated without inputting the password.
Enable ......... The security lock is enabled.
The security lock is activated when the power is turned on, and
the password must be input in order to operate the projector.
E-58
Info.
• Select menu name “Info.”.
See “Menu Operation Method” on Page E-40 for information about performing menu operations. The item name display will
differ depending on the input signal. See “List of Item Names Offering Input Selection and Adjustments/Settings” on Page E-45.
Status
This displays information about the equipment.
Select item name “Status” and press the ENTER button.
There is a change to the status display.
Press the CANCEL button to return to the menu.
Display Contents:
Projector model, firmware version, and the internet home page address of PLUS Vision Corp.
Factory Default
This function returns the adjustments and settings of all the input sources to the standard factory default values.
Select item name “Factory Default” and press the ENTER button.
There is a change to the display [Press “ENTER” to Factory Default
Set].
Press the ENTER button to initialize.
To cancel, press the CANCEL button and there will be a return to the
menu.
Items that are not set to the factory default:
Projection method, Language and Lamp Timer and Security.
Lamp Timer Reset
This function resets the lamp timer. Be sure to perform the reset
operation when the lamp cartridge has been replaced.
Select item name “Lamp Timer Reset” and press the ENTER button.
There is a change to the display “Press “ENTER” to Lamp Timer Reset”.
Press the ENTER button to initialize.
To cancel, press the CANCEL button and there will be a return to the
menu.
E-59
Info.
Resolution / Frequency
This function displays the resolution and frequency of the detected input signal.
Lamp Timer
This displays the lamp timer.
This projector has an Eco mode function. The lamp life will differ between
Normal mode and Eco mode.
Lamp Life
Use only in Normal mode: approx.2000 hours
Use only in Eco mode: approx.3000 hours
* Lamp life will differ when there has been switching between the modes.
• When Lamp Life Has Been Reached
“Replace the Lamp Cartridge” is displayed on the screen for 10 seconds in
a 1-minute interval.
Please replace the lamp with a new one.
See “Replacing the Lamp Cartridge” on Page E-64 for information about
lamp cartridge replacement.
• When Over 100 Hours Have Elapsed Since Reaching Lamp Life
(Including Eco Mode)
[Warning!! System Shutdown] is displayed for 10 seconds and the power is
switched off. Pressing the STANDBY button under this condition will not
switch on the power. Please replace the lamp cartridge.
E-60
When an Indicator is Lit or Flashing
The indicators on the projector’s control panel light or flash to
notify of problems, as described below.
An indicator is also used to notify you of the currently set power
mode (under normal circumstances). See “Power Cable Connections and Switching the Power On/Off” on page E-23.
STATUS indicator
US
AT
ST
Y
DB
AN
ST
Y
DB
STANDBY indicator
AN
ST
TO
AU
Indicator status
STATUS
STANDBY
STATUS
STANDBY
STATUS
STANDBY
Flashing amber for 60 seconds, then lit amber
The lamp has reached the end of its service life. The power
will no longer turn on.
The projector can be used for 100 hours after the lamp has
reached the end of its service life.
Replace with a new lamp cartridge.
Flashing red
(lit for 1 seconds/off for 1 seconds)
The lamp cover is open.
The lamp cover is not properly mounted. Mount it properly.
Lit red
Lit red
Flashing red
(lit for 0.5 seconds/off for 0.5 seconds)
STANDBY
Lit red
STANDBY
STATUS
STANDBY
It is time to replace the lamp.
Replace with a new lamp cartridge.
When the power is on (Lit green)
Standby (Lit amber)
STATUS
STATUS
What you should do
Lit red
Flashing red
(lit for 0.5 seconds/off for 0.5 seconds)
The temperature is abnormally high.
• The temperature protector has been activated. If the room
temperature is high, move the projector to a cool place. If
the projector’s internal temperature is high, check the cooling fan’s ventilation slots and clean them if they are clogged.
• When the temperature protector is activated, the power turns
off and in some cases will not turn back on immediately. In
this case wait about 90 seconds, then try again.
The fan has stopped.
Unplug the power cable and contact a store that sells the U5632/U5-532/U5-512 for repairs.
Lit amber
Flashing red
(lit for 1 seconds/off for 1 seconds)
When the lamp has burned out during use
Flashing amber for 90 seconds, then lit amber
When the lamp does not come on from the start
Lit amber
The lamp will not light.
Wait at least 90 seconds, then turn the power back on. If the
problem persists, unplug the power cord and contact a store
that sells the U5-632/U5-532/U5-512 for repairs.
Should an indicator be in a condition other than normal or flash at a rate other than the aforementioned, disconnect the power
cable and contact your store of purchase.
Thermal Protector
When the temperature inside the projector becomes abnormally high, the STATUS indicator flashes red (0.5 seconds on/0.5
seconds off), the STANDBY indicator is a steady red, and at the same time the temperature protector operates and switches off
the power of the projector.
Should this happen, please take the following actions.
1. Switch off the power and disconnect the power plug from the wall outlet.
2. Check the following matters and take the required measures.
When the projector is being used in a location that has a high ambient temperature, set it up again in a cool location. Check the
outflow and intake holes and clean them if they are obstructed.
3. Wait about 60 minutes until the temperature of the projector drops.
If after having performed the above matters, the problem still has not been solved, please contact your store of purchase.
E-61
Troubleshooting
Check the following matters before requesting servicing.
Problem
Power does not turn on
Reference
Page
Check
• Is the power cord plugged into a power outlet?
• Is the lamp cover properly mounted?
• Is the projector’s temperature high? To protect the projector, the power cannot be turned on when the projector’s temperature is abnormally high.
• Has the lamp reached the end of its service life?
E-61
Is a connected input selected?
Is the cable properly connected to the input terminal?
When a computer is connected, are signals being output from the computer?
Does the signal being input have a frequency usable with this projector?
Are the brightness and contrast adjusted to the minimum?
Is the STATUS indicator lit a steady red or flashing red?
When the component signal of the DVD player is connected with the RGB
connector and the image is not output, is [Input Settings] of the RGB connector properly selected?
• For a RGB input, has the picture been properly adjusted?
E-28
E-18 –20
E-60
E-69
E-47
E-61
E-56
Image is distorted
• Is the projector properly installed?
• For trapezoidal (keystone) distortion, perform keystone adjustment.
Please note that depending on the projected picture and the projection conditions, it may not be possible to eliminate keystone distortion completely.
E-26
E-31, 53
Image is out of focus
•
•
•
•
E-27
E-15 , 16
E-15 , 16
—
Image is not in proper
position and is not
displayed properly
• For a computer input, are the horizontal and vertical positions properly adjusted?
• Does the input signal have a compatible resolution and frequency? Check
the computer’s resolution.
E-48
Video image is crushed
• If the image is crushed in the horizontal or vertical direction or if it is not
displayed over the entire screen, select a different aspect ratio.
E-29
Colors of the overall image
are strange
• When inputting component signals, is “Color Space” setting correct?
• For a composite input, is “Tint” properly adjusted?
E-50
E-47
No image is produced
•
•
•
•
•
•
•
E-23
E-66
E-61
Is the lens properly focused?
Are the screen and projector installed at the proper distance?
Does the projection distance exceed the focusing range?
Is there condensation on the lens, etc.?
If the projector is moved from a cool storage area to a warm place and the
power is turned on, condensation may form on the lens or internal optical
parts. If this happens, wait until the condensation has evaporated before
using the projector.
Characters flicker or colors • From the menu, select “Image” and adjust the “Picture Adj.” and “Fine Picture”.
are offset for RGB inputs
E-47, 48
E-69
E-47, 48
Cannot select the menu
name
• Other than [Settings], [Option] and [Information], selection will not be possible unless a signal is being input to the projector and the image/picture is
projected.
—
Remote control unit does
not operate
• Are the remote control unit’s batteries worn? Replace with new batteries.
• Is there an obstacle between the remote control unit and the projector’s
remote control signal sensor?
• Is the remote control unit outside of range?
• Are you pointing the remote control unit’s transmitter towards the projector’s
remote control signal sensor?
E-11, 12
E-13
STATUS indicator is lit red
or flashing red
• See “When an indicator is lit or flashing”.
E-62
E-13
E-13
E-61
Cleaning
• Be certain to disconnect the power plug from the power outlet before cleaning.
• Do not spray or otherwise expose the projector, lens, or screen to volatile substances such as insecticides. Do not leave rubber
or vinyl products in contact with the projector for long periods. Doing so could cause them to undergo qualitative changes or the
coatings may peel, etc.
Cleaning a Soiled Projector Main Unit
• Wipe with a lint-free, soft, dry cloth.
When very dirty, wipe with a cloth that has been moistened with a diluted neutral detergent, then finish with a dry cloth. If a
chemically-treated cloth is going to be used, please follow any written warnings.
• Do not wipe with thinner, benzene, or other solvents. Doing so could cause them to undergo qualitative changes or the coatings
may peel, etc.
• When removing the dust of the outflow and intake holes, use the brush attachment on a vacuum cleaner to clean out the dust.
Avoid using the vacuum directly without attaching the adapter as well as the use of a nozzle adapter.
• Do not scratch or otherwise hit the projector body with your nails or other hard object, since this will cause scratches.
Dirty Lens
• Clean using the same method you would use to clean a camera lens: Use a commercial blower for camera use or cleaning
paper for eye glasses. Be careful not to scratch the lens at this time.
Dust of the Intake and Outflow Holes
Dust that collects in the intake and outflow holes will obstruct the ventilation and cause the internal temperature to rise which
could cause damage. Clean this area carefully. As a guideline, clean at least every 100 hours of usage.
• Switch off the power, check that the STANDBY indicator has changed to a steadily lit amber, then
unplug the power cable.
• Clean out the holes from the outside using a
vacuum cleaner. Use the brush adapter of the
vacuum cleaner to do this. Avoid using the vacuum
directly without attaching the adapter as well as the
use of a nozzle adapter.
ST
AT
US
AN
ST
DB
Y
Y
DB
AN
ST
TO
AU
CE
R
G
B
S
V
ID
E
O
V
ID
E
O
A
U
D
IO
M
O
U
S
E
P
C
C
O
N
TR
O
L
UR
SO
Cleaning the Inside of the Projector
Cleaning of the inside of the projector is required about once a year. Failure to clean over a long period while dust has collected
inside the projector could cause a fire or breakdown. Do not clean the inside of the projector by yourself. Please be sure to contact
your dealer.
E-63
Replacing the Lamp Cartridge
• The lamp that is used as a light source in the projector has a limited service life. The rated service life of the lamp is
about 2000 hours (when used in normal mode only). This could be shortened depending on conditions of use and
other factors.
Note that lamp life will be extended when the projector is often used in Eco mode. (The rated service life of the lamp
means the average value of lamp life for lamps that have been manufactured over a long period, and it is derived from
test conditions at this company.)
• When the life of the lamp is exceeded, the STATUS indicator lights a steady red and the message [Replace the Lamp
Cartridge] is displayed on the screen. When this occurs, it is time to replace the lamp cartridge. Please make the
replacement following the procedure below.
• If the projector is used another 100 hours after the lamp’s service life is reached, the power is set to the standby mode
and no longer turns on.
• Contact a store that sells the U5-632/U5-532/U5-512 for a replacement lamp. Indicate you need a U5-200 replacement
lamp for the U5-632/U5-532/U5-512 (order code 28-050).
CAUTION
• Replacement of the lamp cartridge is performed after switching off the power, waiting for the cooling fan to stop,
disconnecting the power plug from the power outlet, and then leaving the projector for about 60 minutes before
replacement is started. Replacement of the lamp cartridge during operation or immediately after operation stops will
cause burns because of the high temperature.
• Do not remove any screws other than those specified.
• Do not touch the lamp with bare hands. Doing so could shorten the life of the lamp.
• If lamp has reached the end of its usable life, the lamp bulb may shatter. When this happens, an explosive sound can
be heard and pieces of glass may be scattered in the lamp cartridge. Do not touch them as the pieces of glass may
cause injury. If this happens, contact your dealer or the store the projector was purchased.
E-64
Replacing the Lamp Cartridge
Preparations: Turning the projector upside-down on top of a soft cloth, etc., so that it does not get scratched makes it easier to
replace the lamp cartridge. Turn the projector right-side up after replacing the lamp cartridge.
1 Unplug the power cord.
2 Turn the projector upside-down.
3 Remove the lamp cover.
(1) Turn the lamp cover’s set screw counterclockwise and
loosen until the screw turns freely. (The screw does
not come off.)
(2) Open the lamp cover a little, then pull it in the direction of the arrow and remove it.
4 Remove the lamp cartridge.
(1) Turn the lamp cartridge’s screw counterclockwise and
loosen them until the screw turn freely. (The screw
do not come off.)
(2) Grasp the lamp cartridge’s handle and pull upward
to remove the lamp cartridge.
E-65
Replacing the Lamp Cartridge
5 Mount the new lamp cartridge.
(1) Push the lamp cartridge in slowly.
(Line it up with the screw holes in the projector.)
(2) Turn the lamp cartridge screw clockwise to tighten
them.
6 Mount the lamp cover.
(1) Set the tip of the lamp cover in place, then close the
lamp cover.
(2) Turn the lamp cover’s screw clockwise to tighten it.
7 Reset the Lamp Timer.
Connect the power cable, switch on the power, and then reset.
Select [Info.] → [Lamp Timer Reset] on the menu and press the ENTER button. There is a change to the initialization
verification display. Press the ENTER button again. See “Lamp Timer Reset” on Page E-59.
Note:
After reaching the lamp service life, if the lamp is used for more than another 100 hours, it will not be possible to switch on the power. Should
this happen, while the projector is in the standby mode, simultaneously holding down the projector’s SOURCE button and AUTO button for
more than 5 seconds will clear the lamp timer. Checking that the STATUS indicator is out will show that the lamp timer has been cleared.
Contact a store that sells the U5-632/U5-532/U5-512 for a replacement lamp. Indicate you need a U5-200 replacement lamp for the U5-632/
U5-532/U5-512 (order code 28-050).
E-66
Specifications
Model
U5-632
Optical
Method of projection :
DMD
Lamp
Projection lens :
Image size
Light Output
Contrast Ratio
DLP™ (single chip DMD)
0.7 inches 1024⳯768 dots
200 W high pressure mercury lamp
Manual zoom (⳯1.2), Manual focus F = 2.6 – 2.9, f = 18.4 – 22.1 mm (f = 0.72 – 0.87 inch)
Minimum: 38.4 inch (at projection distance of 1.2m(3.9 feet) telephoto)
Maximum: 300 inch (at projection distance of 8.0m(26.2 feet) wide)
Standard mode: 2200 lumens (in the “Dynamic” mode)
B/W mode: 3000 lumens (in the “Dynamic” mode)
2000:1 (Full on/off)
Electrical
Inputs
Color Reproduction
Resolution
Input Current
Power Requirement
Power Consumption
Video (NTSC3.58/NTSC4.43/PAL/PAL-N/PAL-M/PAL60/SECAM/YCbCr(NTSC, PAL)/
YPbPr(480p, 576p, 1080i, 720p)): (automatic or manual switching)
RGB (Horizontal :15 to 80 kHz, Vertical 50 to 85 Hz)
Full color (16,770,000 colors)
VGA (640⳯480) expansion/true, S-VGA (800⳯600) expansion/true
XGA (1024⳯768) true, S-XGA (1280⳯1024) compression
2.8/1.4 A
100 – 120/220 – 240 V AC, 50/60 Hz
280 watts (250 watts in eco mode)
Mechanical
Dimensions Excluding Stand
Weight
Operational Temperatures
216 mm (W)⳯60 mm (H)⳯252 mm (D) (not including protrusion)
8.5 in.(W)⳯2.4 in.(H)⳯10.3 in.(D) (not including protrusion)
Approximately 2.0 kg / 4.4 lbs
Data projector: 5° to 35°C (41° to 95°F), 30 to 85% humidity
• Specifications and design are subject to change without notice.
E-67
Specifications
Model
U5-532/U5-512
Optical
Method of projection :
DMD
Lamp
Projection lens :
Image size
Light Output
Contrast Ratio
DLP™ (single chip DMD)
0.55 inches 800⳯600 dots
200 W high pressure mercury lamp
Manual zoom (⳯1.2), Manual focus F = 2.6 – 2.9, f = 20.0 – 24.0 mm (f = 0.79 – 0.94 inch)
Minimum: 27.6 inch (at projection distance of 1.2m(3.9 feet) telephoto)
Maximum: 300 inch (at projection distance of 11.1m(36.4 feet) wide)
Standard mode: 1800 lumens (in the “Dynamic” mode)
2000:1 (Full on/off)
Electrical
Inputs
Color Reproduction
Resolution
Input Current
Power Requirement
Power Consumption
Video (NTSC3.58/NTSC4.43/PAL/PAL-N/PAL-M/PAL60/SECAM/YCbCr(NTSC, PAL)/
YPbPr(480p, 576p, 1080i, 720p)): (automatic or manual switching)
RGB (Horizontal :15 to 80 kHz, Vertical 50 to 85 Hz)
Full color (16,770,000 colors)
U5-532
VGA (640⳯480) expansion/true, S-VGA (800⳯600) expansion/true
XGA (1024⳯768) true, S-XGA (1280⳯1024) compression
U5-512
VGA (640⳯480) expansion/true, S-VGA (800⳯600) true
XGA (1024⳯768) compression
2.8/1.4 A
100 – 120/220 – 240 V AC, 50/60 Hz
280 watts (250 watts in eco mode)
Mechanical
Dimensions Excluding Stand
Weight
Operational Temperatures
216 mm (W)⳯60 mm (H)⳯240 mm (D) (not including protrusion)
8.5 in.(W)⳯2.4 in.(H)⳯10.3 in.(D) (not including protrusion)
Approximately 1.9 kg / 4.2 lbs
Data projector: 5° to 35°C (41° to 95°F), 30 to 85% humidity
• Specifications and design are subject to change without notice.
E-68
Table of Supported Frequency
The projector automatically identifies the signal input from the computer and selects the optimum resolution as shown on the table
below.
Manual adjustments may be required for some input signals. See “Picture Adj. / Fine Picture / H Position / V Position” on page
E-47, 48.
Signal
VIDEO(NTSC)
VIDEO(PAL/SECAM)
VESA
Apple Macintosh
HDTV (1080i)
SDTV
(720p)
(576p)
(480p)
Resolution
ⳮ
ⳮ
640
640
720
640
640
720
720
640
640
640
640
800
800
800
800
800
1024
1024
1024
1024
1280
640
823
1024
1152
1920
1920
1280
720
720
⳯ 350
⳯ 350
⳯ 350
⳯ 400
⳯ 400
⳯ 400
⳯ 400
⳯ 480
⳯ 480
⳯ 480
⳯ 480
⳯ 600
⳯ 600
⳯ 600
⳯ 600
⳯ 600
⳯ 763
⳯ 763
⳯ 763
⳯ 763
⳯ 1024
⳯ 480
⳯ 624
⳯ 768
⳯ 870
⳯ 1080
⳯ 1080
⳯ 720
⳯ 576
⳯ 480
Frequency
Horizonral (kHz)
15.734
15.625
31.5
37.9
31.5
31.5
37.9
31.5
37.9
31.5
37.9
37.5
43.3
35.2
37.9
46.9
48.1
53.7
48.4
56.5
60.0
68.7
64.0
35.0
49.7
60.2
68.7
33.8
28.1
45.0
31.3
31.5
Vertical (Hz)
60.0
50.0
70.1
85.1
70.0
70.1
85.1
70.0
85.0
60.0
72.8
75.0
85.0
56.3
60.3
75.0
72.2
85.1
60.0
70.1
75.0
85.0
60.0
66.7
74.5
74.9
75.1
60.0
50.0
60.0
50.0
60.0
* The model name for XGA is U5-632/U5-532 and SVGA U5-512.
* The projector does not support the ADC connector on Apple Macintosh.
Video
嘷
嘷
ⳮ
ⳮ
ⳮ
ⳮ
ⳮ
ⳮ
ⳮ
ⳮ
ⳮ
ⳮ
ⳮ
ⳮ
ⳮ
ⳮ
ⳮ
ⳮ
ⳮ
ⳮ
ⳮ
ⳮ
ⳮ
ⳮ
ⳮ
ⳮ
ⳮ
嘷
嘷
嘷
嘷
嘷
嘷
ⳮ
RGB
XGA
SVGA
ⳮ
ⳮ
嘷
嘷
嘷
嘷
嘷
嘷
嘷
嘷
嘷
嘷
嘷
嘷
嘷
嘷
嘷
嘷
嘷
嘷
嘷
嘷
ⳮ
嘷
嘷
嘷
嘷
ⳮ
ⳮ
ⳮ
ⳮ
ⳮ
ⳮ
ⳮ
嘷
嘷
嘷
嘷
嘷
嘷
嘷
嘷
嘷
嘷
嘷
嘷
嘷
嘷
嘷
嘷
嘷
嘷
嘷
嘷
ⳮ
嘷
嘷
嘷
嘷
ⳮ
ⳮ
ⳮ
ⳮ
ⳮ
: Supported frequency
: Not supported frequency
U5-632/U5-532
The display resolution is 1024⳯768 dots. When displaying a signal with resolutions other than 1024⳯768 dots such as 1280⳯1024,
sizes of characters or lines may be uneven.
U5-512
The display resolution is 800⳯600 dots. When displaying a signal with resolutions other than 800⳯600 dots such as 1024⳯768,
sizes of characters or lines may be uneven.
E-69
Cabinet Dimensions
Unit: mm (inch)
Applicable Projector:
U5-632
SOURCE
AUTO
STANDBY
252 (9.9)
STANDBY
STATUS
60 (2.4)
216 (8.5)
Applicable Projector:
U5-532/U5-512
SOURCE
AUTO
240 (9.5)
STANDBY
STANDBY
STATUS
60 (2.4)
216 (8.5)
E-70
2005
Download PDF