DLI | 9200 | Product manual | DLI 9200 Product manual

Product Manual
Rev. 3
Disclaimer
Data Ltd., Inc. (DLI) reserves the right to make changes in specifications and other information
contained in this document without prior notice, and the reader should in all cases consult DLI
to determine whether any such changes have been made. The information in this publication
does not represent a commitment on the part of DLI.
DLI shall not be liable for technical or editorial errors or omissions contained herein: nor for
incidental or consequential damages resulting from the furnishing performance, or use of
this material.
This document contains proprietary information that is protected by copyright. All rights are
reserved. No part of this document may be photocopied, reproduced, or translated into another
language without the prior written consent of DLI.
© 2011 Data Ltd., Inc. All rights reserved.
Web Address: www.dataltd.com
Trademarks
DLI 9200 is a trademark or registered trademark of Data Ltd., Inc.
Windows and Windows logos are trademarks or registered trademarks of Microsoft Corporation.
The Bluetooth trademarks are owned by Bluetooth SIG, Inc., USA and licensed to DLI
The PenMount trademarks are owned by PenMount International Corp. and licensed to DLI
RAM Mount is a trademark of National Products Inc. in the United States and or other
countries.
Other product names mentioned in this manual may be trademarks or registered trademarks of
their respective companies and are hereby acknowledged.
DLI 9200 PRODUCT MANUAL
PAGE 2/39
Rev. 3
Table of Contents
Table of Contents…………………………………………………………………………………………………..03
Thank You!………………………………………………………….………………………………….................04
DLI 9200 Peripherals and Accessories…………………………………………………………………………..04
Hardware Overview……………………………………………………………………………………………...…05
Setting Up the DLI 9200 Terminal………………………………………………………………………………...09
Unpack the Carton and Verify its Contents………………………………………………………………………09
Battery Status LED…………………………………………………………………………………………………09
Charging the Battery in the DLI 9200…………………………………………………………………………….10
Power Management Utility………………………………………………………………………………………...11
Optional Auto Power On & Off Setup…………………………………………………………………………….11
Adjusting the Backlight……………………………………………………………………………………………..11
Using the Stylus…………………………………………………………………………………………………….13
Using the Programmable Keys……………………………………………………………………………………16
Using the Wi-Fi Radio……………………………………………………………………………………………...19
Using the Bluetooth Radio…………………………………………………………………………………………22
SIM Card Insertion………………………………………………………………………………………………….26
Using the RS-232 DB9M…………………………………………………………………………………………..26
Using the GPS………………………………………………………………………………………………………27
Installation Clearance & Airflow…………………………………………………………………………………...29
Technical Assistance……………………………………………………………………………………………….30
Product Service and Repair……………………………………………………………………………………….30
Shipping Your DLI Device…………………………………………………………………………………………31
Limited Warranty……………………………………………………………………………………………………33
FCC Compliance……………………………………………………………………………………………………36
DLI 9200 Product Manual
Rev. 3
Thank You!
Data Ltd Inc. would like to thank you for selecting the DLI 9200. The DLI 9200 was designed as
a forward thinking product that is modular in design and upgradeable. We thank you, the
customer, for giving us the inspiration for the following features:
•
•
•
•
•
•
Impact Resistant Case
Integrated Backup Battery with 10~60V DC/DC Converter
Integrated four radio technology (WiFi, Bluetooth, GPS, and Cellular)
12” or 15” Industrial-rated touchscreen
Dual external WiFi antennas and external Bluetooth antenna
Boot media via SSD (Solid State Drive)
DLI 9200 Peripherals and Accessories
5421112020900P
AC Adapter with Line Cord (not included)
6708260000000P
Cigarette Lighter Adapter for charging the unit in a vehicle
3431182037500P
Power cable, 3 prong locking connector with 5 AMP (bare leads)
5400020
46011140010010
DLI 9200 PRODUCT MANUAL
DLI Surge Suppressor
WiFi Antenna
PAGE 4/39
Rev. 3
Hardware Overview
Battery LED
Front Panel
WiFi LED
Bluetooth LED
Power LED
Impact Resistant
Metal Case
DLI 9200 PRODUCT MANUAL
Programmable Keyboard
PAGE 5/39
LCD with Touch
Panel
Rev. 3
Front Panel Status Indicator Lights
The front panel includes status indicator lights for the following:
 Power On / Off
 Bluetooth
 WiFi
 Battery
Indicator Light
Power
Status
Solid Green
Description
Powered On
Bluetooth
Blinking Blue
No Light
Enabled
Disabled or Not Available
WiFi
Green Light
No Light
Connected
No Connection
Refer to Battery Status LED
section. Page 9
Battery Status
Top Panel
WiFi Antenna
Connector
(RPTNC)
WiFi Antenna
Connector
(RPTNC)
Bottom Panel
Master Reset
Ethernet
Port
Bluetooth
Antenna
Connector
AC Power
Bottom Panel Features
DLI 9200 PRODUCT MANUAL
Locking
USB
Ports
Serial
Port
Speaker
Port
Microphone
Port
FME
SMA
Connector
Connector
PAGE 6/39
VGA Port
Rev. 3








Master Reset button. This forces a hard reset.
Standard Ethernet Port (RJ-45)
Standard Serial Port (RS-232 DB9) See Page 26.
Standard Audio Ports (Speaker and Microphone Port)
VGA Port (Video Out)
Optional SMA Connector for External GPS
Optional External FME Antenna Connector
Standard locking USB, industrial grade connectors. Only DLI authorized peripherals
should be attached to these USB ports. The USB port power is rated to 1A.
USB Port
Pin #
Description
1
2
(+5V)
Data +
3
Data -
4
GND
1 2 3 4
Side Panel
On/Off
Button
DLI 9200 PRODUCT MANUAL
PAGE 7/39
Rev. 3
Back Panel
SIM Slot Door
Mount
Screw
Posts
Speaker
Speaker
Setting Up the DLI 9200 Terminal
1.
3.
4.
5.
Unpack the carton and verify its contents. – Page 9
Charge the main battery for 2hrs.
Power on the terminal via the power button on the left side of the terminal.
Let the device load and end on the Desktop screen.
Default BIOS password is qwerty
DLI 9200 PRODUCT MANUAL
PAGE 8/39
Rev. 3
Unpack the Carton and Verify its Contents
Verify that the carton contains the following items:
•
•
DLI 9200 Industrial Tablet Computer (terminal)
DLI 9200 Quick Reference Start Guide
If you ordered peripherals and/or accessories, verify that they are also included
with the order.
Be sure to keep the original packaging in case the DLI 9200 needs to be returned for
service– See page 31.
Battery Status LED’s
On Power Source (Charger)
Battery Indicator Light
Power
Battery
Solid Green
Status
Description
Powered On
Solid Green
Blinking Green
Blinking Yellow
Blinking red
Capacity level = 100%
Capacity level > 70%
Capacity level > 20% - < 70%
Capacity level < 20%
Off Power Source (No Charger)
Battery Indicator Light
Power
Battery
Solid Green
Status
Description
Powered On
Solid Green
Solid Yellow
Solid Red
Blinking red
Capacity level > 70%
Capacity level < 70% - > 20%
Capacity level < 20% - > 10%
Capacity level < 10%
For charging, use only Data Ltd. Inc., DLI 9200 peripherals and the power
cables. Use of peripherals or cables not sold/manufactured by Data Ltd will
void the warranty and may damage the terminal.
Charging the Battery in the DLI 9200
1. Connect the DLI 9200 to the power supply provided by Data Ltd.
2. The battery will begin charging immediately
3. Charge the battery for two hours, then power on the terminal.
Due to the nature of Lithium Ion, be sure to periodically charge your
batteries, as months of inactivity can have a long-term negative effect on
the life of the battery.
The battery will charge even if the terminal is in use as long as AC is applied to
the terminal.
DLI 9200 PRODUCT MANUAL
PAGE 9/39
Rev. 3
Checking the Battery Power
The main way to check the battery power on the DLI 9200 is to use the battery icon. It provides
a graphical representation of the remaining battery power.

Tap on the battery icon in the system task bar.

Tapping the battery icon once will show the battery life percentage and default /
premade Power Plans.
DLI 9200 PRODUCT MANUAL
PAGE 10/39
Rev. 3
Power Management Utility
The DLI 9200 includes a comprehensive suite of power management functions. The power
management is based upon the ACPI Standard (Advanced Configuration and Power
Interface Specification) and is operated within the Embedded Controller (EC) at low level
management. A graphical interface is supplied so that customer specific power plans can be
controlled. The Power Management Utility is accessible from the DLI Control Center
application as well as from the control panel within Windows.
Optional Auto Power On & Off Setup
Your device can be set to power on when external power is detected via the BIOS and powered
off at a certain battery percentage via the Operating System.
To enable the Auto Power On feature please contact DLI Technical Support, 800.526.1299 x774.
To enable the Auto Power Off feature based on battery percentage:
Tap Start>Control Panel>Power Options.
Select Change Plan Settings under the current Power Plan. This will bring up the Sleep and
Display settings (shown above on the left). Now select Change Advanced Power Settings
(shown above on the right).
(Continued on page 12.)
DLI 9200 PRODUCT MANUAL
PAGE 11/39
Rev. 3
Select Battery to expand the options (shown below).
Select Low battery level and give the On battery a percentage. 50% is what is shown; this
number can be changed to better fit the needed requirements.
After selecting a low battery level, now select a Low battery action. Select Shut down for On
Battery. Select Apply and OK.
Once external power is removed (i.e. a forklift or a vehicle is turned off) the device will run off the
internal battery until it reaches the Low battery level set above and perform the set action.
Adjusting the Backlight
Brightness levels of the liquid crystal display (LCD) are adjustable based on the
lighting conditions. By default the level is set to 7. (0 being the lowest and 7 being
the highest level) To adjust the level of backlight:
Start>Control Panel. Choose the DLI Brightness icon.
Tap “–“ or “+” to adjust the brightness. The settings are auto saved after adjustment.
Tap Options>Place in system tray for quick access to this utility.
DLI 9200 PRODUCT MANUAL
PAGE 12/39
Rev. 3
Using the Stylus
Calibrating and Using the Stylus
Calibration ensures the accuracy of the stylus and adjusts the input angle for each person who
uses it. The terminal stores calibration data and settings on a per-user basis.
The stylus functions as a mouse; generally, a tap is the same as a mouse click.
Tap:
Drag:
Right Mouse Click:
Tap the touch screen once to open menu items and select options.
Hold the stylus on the screen and drag across the screen to select text
and images. Drag in a list to select multiple items.
Holding down the stylus for 3 seconds will activate the right mouse click.
Calibration:
1. Right tap on the PenMount icon in the system stray.
2. Select the PenMount Control Panel.
3. Chose the PenMount 6000 USB icon and tap the Configure button.
DLI 9200 PRODUCT MANUAL
PAGE 13/39
Rev. 3
4. Tapping on the Calibration button will prompt the user to tap multiple points on the screen.
5. Hold the stylus naturally as if you were writing with a ball point pen, holding the stylus
down on each red point as they appear. During calibration, position the terminal as close
to the way you would use it.
DLI 9200 PRODUCT MANUAL
PAGE 14/39
Rev. 3
6. After completion the screen returns to the Standard Calibration window. Selecting OK
will save the settings. Tapping Standard Calibration will start the process again.
7. The calibration is now complete and the PenMount Control Panel window is displayed.
Select OK to close the application down. The PM icon will still be present in the system
tray for quick configuration should your touch screen need recalibration.
Do not write on the terminal display with ink pens or use other sharp
objects that may damage the display.
DLI 9200 PRODUCT MANUAL
PAGE 15/39
Rev. 3
Using the Programmable Keys
The DLI 9200 has 6 integrated function keys. Each of the keys is user configurable via the DLI
KeyMon Utility. The keys can be assigned to perform executable applications or to Data Ltd.
predefined functions. The predefined functions are as follows: F1 assigned to DLI On-Screen
Keyboard and F2 assigned to DLI Camera.
The DLI KeyMon utility can be launched from the system tray or from the
Start>Programs>DLI>DLI KeyMon. The procedure below will assist you in defining the keys.
1. Double tap on the DLI KeyMon icon in the system tray
2. The DLI KeyMon screen is presented. Choose a key that requires a definition by
tapping on the orange keys or by highlighting the key in the button assignment area
and then double tapping.
3. There are 5 options for key assignment. Choose an assignment type that is required
for the key. Unassigned, Keyboard(OSK), Command, Scanner, External Program.
4. To assign an application choose External program and tap on the browser icon.
(See page. 17)
DLI 9200 PRODUCT MANUAL
PAGE 16/39
Rev. 3
Browser Icon
5. The user is returned to the assign menu once the selection has been chosen from
the browser icon. Selecting the apply button saves the change to the key. The path
to the application will appear in blue below the Current Assignment:
DLI 9200 PRODUCT MANUAL
PAGE 17/39
Rev. 3
6. To select a predefined action or keystroke choose Command and tap the down arrow
to display a drop menu.
7. The drop menu has a list of various actions and keystrokes to choose from. Once you
have selected the command, tap the apply button to save.
8. To Close the DLI KeyMon tap on the “X” on the top right of the Main Window.
DLI 9200 PRODUCT MANUAL
PAGE 18/39
Rev. 3
Using the WiFi Radio
The DLI 9200 has a PCIe 802.11a/b/g/n integrated radio. In Windows 7 the radio is configured
using the Windows Network and Sharing Center. With older versions of Windows the radio is
configured by Intel PROSet. Please contact Technical Support (See page 30) if you have any
questions configuring your radio. Windows provides the following features to Administrators and
end-users:






Connect or disconnect.
View Available Networks and network mapping.
Setup a new connection or network- Wireless, Wired, VPN connection or set up a
router or access point.
Connect and set up to a domain or workgroup.
View Signal Quality and Speed.
Troubleshoot problems – Diagnose and repair network programs, or get
troubleshooting information.
Intel PCIe Integrated Radio

The Network icon can be found in the task tray. It provides a graphical representation of
your connection or signal quality.

Tap the network icon on the taskbar to see all your wireless and wired options—Wi‑Fi,
mobile broadband, dial-up, or corporate VPN. One more tap, and you're connected.
DLI 9200 PRODUCT MANUAL
PAGE 19/39
Rev. 3

Selecting Open Network and Sharing Center will bring you to the window below. Here
you can view your Network Map, your Active Networks, your Connection types and info.
You can also set up new connections or networks. Enter a domain or workgroup and
edit sharing options.

Selecting Set Up a Connection or Network brings up an easy to use wizard that helps
create a connection to your network and or the Internet. Choose the option that fits what
you need to do.
DLI 9200 PRODUCT MANUAL
PAGE 20/39
Rev. 3

If the SSID is not broadcasted you will need to select ‘Manually connect to a wireless
network’. This option will allow to you create a profile to add the SSID, Security type,
and Encryption type. Select Next to connect.
DLI 9200 PRODUCT MANUAL
PAGE 21/39
Rev. 3
Using the Bluetooth Radio
The internal Bluetooth Class II wireless radio in the DLI 9200 is enabled by default. Microsoft™
Bluetooth software comes pre-installed on your terminal.
Pairing an Accessory to the DLI 9200
To pair a Bluetooth device to the DLI 9200 the icon in the system tray offers shortcuts to the
Bluetooth Settings window; the Bluetooth File Transfer Wizard and the Add New Connection
Wizard. Press and hold the stylus on the Bluetooth icon to open the Bluetooth device menu.
The following process is generally common for connecting most Bluetooth devices (keyboard,
mouse, printer, cellular phone, PDA, Tablet PC, notebook PC, etc.). The actual steps may be
slightly different for every type and brand of Bluetooth device. Read and follow the installation
instructions included with your specific device. These are the four generic steps for connecting to a
Bluetooth device.
1.
2.
3.
4.
Discover
Search
Pair
Connect
Discover
Making a Bluetooth device discoverable makes it visible to other Bluetooth devices. Each
Bluetooth device uses a different method (pressing a button or key combination) to make it
discoverable. This is generally described in the device’s documentation. When you activate
Bluetooth on your Tablet PC it is the signal for the Tablet PC to look for, or discover any Bluetooth
devices within range.
Search
This process will find every Bluetooth device that is discoverable and available for connection
within 33 feet (10 meters).
Pair
Using a passkey creates a secure connection (pairing) between the Tablet PC and
Bluetooth device. This passkey helps prevent data from being intercepted and interpreted by
another device.
Though the passkey exchange helps to secure your data, Bluetooth wireless
technology should not be considered completely secure.
Connect
The first time a Bluetooth device is connected to the terminal the drivers are loaded for that
device. After this initial connection, some Bluetooth devices may disconnect when they go into
power-saving mode. Most will automatically reconnect when they become active again.
DLI 9200 PRODUCT MANUAL
PAGE 22/39
Rev. 3
Using the Bluetooth Application
1. Make sure that either the Bluetooth indicator light is flashing or that there is a
checkmark beside Enable Internal Bluetooth Wireless Radio (both indicate that
Bluetooth is running)
2. Using your stylus, Right mouse click the Bluetooth Devices icon in the system tray.
3. Tap Add a Bluetooth Device to launch the Bluetooth Add Bluetooth Device
Wizard.
4. Place the Bluetooth device (headset, keyboard, printer, etc.) in discoverable mode.
Each Bluetooth device may have a different way to make it discoverable. Some have a
small button on the headset or keyboard; others may require that you press a key
sequence to invoke discovery. Look at the documentation that came with the Bluetooth
device or visit the manufacturer’s website for information.
5. After you make the Bluetooth device discoverable, it will show up in the wizard. Select
the Bluetooth device and select Next.
The Add Bluetooth Device Wizard will search for the Bluetooth device.
DLI 9200 PRODUCT MANUAL
PAGE 23/39
Rev. 3
6. Select the pairing option that best works for you Bluetooth device. This option will vary
per device. You have a limited time after selecting Enter the device’s pairing code to
input the code. Select Next.
If a pairing code is required, please read documentation that came with your Bluetooth
device or contact the manufacturer.
DLI 9200 PRODUCT MANUAL
PAGE 24/39
Rev. 3
7. When the device has been successfully paired and added the wizard is complete and
the device is ready to use. Select Close to finish
DLI 9200 PRODUCT MANUAL
PAGE 25/39
Rev. 3
SIM Card Insertion
The SIM Card Slot is located in the back of the unit under a user accessible case cover. To
access, remove back case cover (two phillip screws) then remove the plate cover (two phillip
screws). The SIM Card Slot is intended for use of the MC8790 (GPRS Wireless Radio) ONLY.
If you are unaware of what type of WWAN Radio you have please contact DLI Technical Support;
(800) 526-1299 x774 or support@dataltd.com.
The unit must be power down prior to inserting the SIM card. Failure to do so
may result in harm to the unit and the SIM.
SIM Slot Door
Back Panel
Using the RS-232 DB9M
The integrated RS-232 Port can be configured to work with many peripherals including Barcode
Scanners, Printers, ODBII (Vehicle Interface), and Remote Monitoring apparatuses. To configure
the RS-232 port so that the data is sent to the keyboard buffer the following procedure is required.
This procedure is typically used when using an external barcode scanner on the device.
All DLI Devices have power to Pin 9.
DO NOT plug-in or unplug any serial devices while the DLI Device is powered on!
Bottom Panel
1 2 3 4 5
6 7 8 9
Serial
Port
DLI 9200 PRODUCT MANUAL
PAGE 26/39
Pin
1
2
3
4
5
6
7
8
9
Description
DCD
TXD
RXD
DSR
GND
DTR
CTS
RTS
+5V
Rev. 3
Using the GPS
The optional GPS module with active antenna provides the SiRFstar III chip set and TTFF (Time
to First Fix) technology which speeds the time to lock to a satellite. The Geohelix active antenna
provides 25db gain. Along with each of these features Data Ltd’s patent pending RF antenna
switching technology provides you with the functionality of switching between external and
internal antennas without software requirements.
Data Ltd has included in the DLI 9200 a GPS software tool to verify that all functions of the GPS
module are working properly.
1. To launch the application tap on the GPS icon on the DLI 9200 desktop.
Connectec GPS Monitor can also be found under C:\Program Files\DLI
2. Set the COM Port to COM 3. This is the COM port that your GPS module is using. Set the
Baud Rate to 9600. Next, tap the Connect button.
DLI 9200 PRODUCT MANUAL
PAGE 27/39
Rev. 3
3. Once connected you can verify the Signal Quality, Satellite Location, Latitude, Longitude
and Altitude. You can also view the Streaming NMEA data. You must be outside a
building as GPS antennas do not work inside buildings.
The green bars indicate a lock to a satellite.
DLI 9200 PRODUCT MANUAL
PAGE 28/39
Rev. 3
Installing Clearance & Airflow
Mounted to the back panel is a RAM-202U ball. Optional RAM mounting arms are available for a
variety of secure options. Ask your Salesperson for more information on RAM Mounts. When selecting a
location to mount the device, keep in mind that the power supply, RF connectors, and I/O are
located on the bottom panel.
Please ensure that you give a minimum of 2.75 inches of clearance from the
base of the unit. Proper cable routing and clearance will help with less strain on
cables and connectors, while also allowing for better access to the ports.
Please ensure the device is mounted at all times and not laid down on the back
panel. Make sure the device is given a minimum of 1.5 inches of clearance to
allow for proper airflow.
Vehicle Installation
IMPORTANT!
Vehicle Power Connection



DLI devices must be installed pre-ignition (directly to battery terminals) with a 5 AMP
in-line fuse.
Failure to connect to battery terminals could damage the power conversion
circuitry.
For 24 volt to 48 volt systems, the DLI Surge Suppressor p/n: 5400020 is required.
DC Converter: 10~60V Input
Red
Positive
Black
Tie
Ground
Yellow together
Please consult your fork truck manufacturer for proper installation instructions.
DO NOT connect power to the hydraulics!
We recommend installation by trained service personnel only. The fuse should
be installed in the positive lead within 5 inches of the battery positive (+)
terminal.
DLI 9200 PRODUCT MANUAL
PAGE 29/39
Rev. 3
Technical Assistance
If you need assistance installing or troubleshooting, please call your Distributor or the Data
Ltd. Inc. Technical Support Office.
North America/Canada:
Telephone:
(800) 526-1299, Ext 774 (8 AM to 4 PM EST)
E- mail:
support@dataltd.com
Website:
http://www.dataltd.com/html/support-ticket.html
Product Service and Repair
Data Ltd. Inc. provides service for all its products through service centers throughout North
America. To obtain warranty or non-warranty service, return the unit to Data Ltd. Inc. (postage
paid) with a copy of the dated purchase record attached. Contact the appropriate location below
to obtain a Return Material Authorization number (RMA #) before returning the product.
Telephone:
(800) 526-1299 ext 766
Fax number:
(239) 491-2554
E-mail:
RMA@dataltd.com
Website:
http://www.dataltd.com/html/request-rma.html
DLI 9200 PRODUCT MANUAL
PAGE 30/39
Rev. 3
Shipping your DLI Device
Proper way to pack your DLI device
DO NOT ship any DLI Device without a proper UPS or FedEx container. The DLI
Container is not meant for stand-alone shipping.


Place device in foam cover as shown.
Place the wrapped DLI device in the correct position in the spacer inside the DLI
Container.
DLI 9200 PRODUCT MANUAL
PAGE 31/39
Rev. 3

Using a proper UPS or FedEx container, line the bottom
with Bubble Wrap, Air Pillows, Packing Foam, etc.

Place the closed DLI container inside the lined Shipping
Container.

Seal the Shipping Container and ship to:
DLI
5570 Lee Street, Suite 12
Lehigh Acres, FL. 33971
The dimensions of the box shown are 27x17x10.

Fill the rest of the Shipping Container with packing
material.
DLI 9200 PRODUCT MANUAL
PAGE 32/39
Rev. 3
Limited Warranty
Data Ltd. Inc. warrants its products to be free from defects in materials and workmanship and to
conform to Data Ltd. Inc. published specifications applicable to the products purchased at the time
of shipment. This warranty does not cover any product which is (i) improperly installed or used; (ii)
damaged by accident or negligence, including failure to follow the proper maintenance, service,
and cleaning schedule; or (iii) damaged as a result of (A) modification or alteration by the
purchaser or other party, (B) excessive voltage or current supplied to or drawn from the interface
connections, (C) static electricity or electro-static discharge, (D) operation under conditions
beyond the specified operating parameters, or (E) repair or service of the product by anyone
other than Data Ltd. Inc. or its authorized representatives.
This warranty shall extend from the time of shipment for the duration published by Data Ltd. Inc.
for the product at the time of purchase ("Warranty Period"). Any defective product must be
returned (at purchaser’s expense) during the Warranty Period to Data Ltd. Inc.’s factory or
authorized service center for inspection. No product will be accepted by Data Ltd. Inc. without a
Return Materials Authorization, which may be obtained by contacting Data Ltd. Inc. In the event
that the product is returned to Data Ltd. Inc. or its authorized service center within the Warranty
Period and Data Ltd. Inc. determines to its satisfaction that the product is defective due to defects
in materials or workmanship, Data Ltd. Inc., at its sole option, will either repair or replace the
product without charge, except for return shipping to Data Ltd. Inc..
EXCEPT AS MAY BE OTHERWISE PROVIDED BY APPLICABLE LAW, THE FOREGOING
WARRANTY IS IN LIEU OF ALL OTHER COVENANTS OR WARRANTIES, EITHER
EXPRESSED OR IMPLIED, ORAL OR WRITTEN, INCLUDING, WITHOUT LIMITATION, ANY
IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE.
DATA LTD. INC’S RESPONSIBILITY AND PURCHASER’S EXCLUSIVE REMEDY UNDER THIS
WARRANTY IS LIMITED TO THE REPAIR OR REPLACEMENT OF THE DEFECTIVE
PRODUCT.
IN NO EVENT SHALL DATA LTD. INC. BE LIABLE FOR INDIRECT, INCIDENTAL, OR
CONSEQUENTIAL DAMAGES, AND, IN NO EVENT, SHALL ANY LIABILITY OF DATA LTD.
INC’S ARISING IN CONNECTION WITH ANY PRODUCT SOLD HEREUNDER (WHETHER
SUCH LIABILITY ARISES FROM A CLAIM BASED ON CONTRACT, WARRANTY, TORT, OR
OTHERWISE) EXCEED THE ACTUAL AMOUNT PAID TO DATA LTD. INC. FOR THE
PRODUCT. THESE LIMITATIONS ON LIABILITY SHALL REMAIN IN FULL FORCE AND
EFFECT EVEN WHEN DATA LTD. INC. MAY HAVE BEEN ADVISED OF THE POSSIBILITY OF
SUCH INJURIES, LOSSES, OR DAMAGES. SOME STATES, PROVINCES, OR COUNTRIES
DO NOT ALLOW THE EXCLUSION OR LIMITATIONS OF INCIDENTAL OR CONSEQUENTIAL
DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU.
All provisions of this Limited Warranty are separate and severable, which means that if any
provision is held invalid and unenforceable, such determination shall not affect the validity of
enforceability of the other provisions hereof.
DLI 9200 PRODUCT MANUAL
PAGE 33/39
Rev. 3
Data Ltd. Inc., Inc. extends these warranties only to the first end users of the products. These
warranties are non-transferable.
The limited duration of the warranty for the DLI 9200 is as follows:

DLI 9200 terminal with the integrated modules are covered by a one-year
limited warranty.

Touch screens are covered by a one-year limited warranty.

The limited duration of the warranty for batteries is one year. Use of any battery
not sold/ manufactured by Data Ltd. Inc. may damage the terminal and/or the
battery and will void the warranty. Batteries returned to Data Ltd. Inc. in a
reduced state may or may not be replaced under this warranty. Battery life will
be greatly increased when following the battery instructions in the DLI 9200
User’s Guide.

Use of any peripheral not manufactured/sold by Data Ltd. Inc. will void the
warranty. This includes but is not limited to: cables, power supplies.
Regulatory and Safety Approvals for the DLI 9200
DLI 9200 terminal meets or exceeds the requirements of all applicable standards organizations
for safe operation. However, as with any electrical equipment, the best way to ensure safe
operation is to operate them according to the agency guidelines that follow. Please read these
guidelines carefully before using your DLI 9200 terminal.
Embedded Safety Information Text
The DLI 9200 has the following safety information on the back label of the terminal
DLI 9200 RF terminal is designed to comply with the most current applicable standards on safe
levels of RF energy developed by the Institute of Electrical and Electronics Engineers (IEEE) and
the American National Standards Institute (ANSI) and has been recommended for adoption by
the Federal Communications Commission (FCC).
DLI 9200 PRODUCT MANUAL
PAGE 34/39
Rev. 3
The compliance labels are located on the back of the unit:
DLI9200
FCC ID: CB10006161
DLI 9200 WPAN (Bluetooth)
Bluetooth
FCC ID: RUJ-QB7M400
Model: QB7M400
DLI 9200 WWAN (CDMA Sierra Wireless Radio) Verizon®
Sierra Wireless
FCC ID: N7NMC5725
DLI 9200 802.11 A/B/G/N Radio
Model: 512AH_MMW
FCC ID: PD9512ANMU
Model: 62205ANHMW
FCC ID: PD962205ANH
DLI 9200 GPRS
GPRS
FCC ID: N7NMC8790
DLI 9200 PRODUCT MANUAL
PAGE 35/39
Rev. 3
The CE Mark on the product indicates that the system has been tested to and
conforms to the provisions noted within the 89/336/EEC Electromagnetic Compatibility Directive
and the 73/23/EEC and 93/68/EEC Low Voltage Directive.
FCC Compliance
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:




Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
Consult the dealer or an experienced radio/TV technician for help.
If necessary, the user should consult the dealer or an experienced radio/television technician for
additional suggestions. The user may find the following booklet helpful: “Something About
Interference.” This is available at FCC local regional offices. Our company is not responsible for
any radio or television interference caused by unauthorized modifications of this equipment or the
substitution or attachment of connecting cables and equipment other than those specified by our
company.
The correction is the responsibility of the user. Use only shielded data cables with this system. In
accordance with FCC 15.21, changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the equipment.
This device and its antenna must not be co-located or operating in
conjunction with any other antenna or transmitter. To maintain compliance
with FCC RF exposure guidelines for body-worn operation, do not use
accessories that contain metallic components.
When using accessories where the terminal is worn on the body, the terminal’s touch screen
must face away from the body.
CAUTION!
Any changes or modifications not expressly approved by the grantee of this
device could void the user's authority to operate the equipment.
DLI 9200 PRODUCT MANUAL
PAGE 36/39
Rev. 3
Canadian Compliance
This Class B digital apparatus complies with Canadian ICES-003. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired
operation.
To prevent radio interference to the licensed service, this device is intended to be operated
indoors and away from windows to provide maximum shielding. Equipment (or its transmit
antenna) installed outdoors is subject to licensing.
Cet appareil numérique de la Classe B est conforme à la norme NMB-003 du Canada.
For European Community Users
Data Ltd. Inc. complies with Directive 2002/69/EC OF THE EUROPEAN PARLIAMENT AND OF
THE COUNCIL of 27 January 2003 on waste electrical and electronic equipment (WEEE).
Waste Electrical and Electronic Equipment Information
This product has required the extraction and use of natural resources for its production. It
may contain hazardous substances that could impact health and the environment, if not
properly disposed.
In order to avoid the dissemination of those substances in our environment and to diminish the
pressure on the natural resources, we encourage you to use the appropriate take-back
systems for product disposal. Those systems will reuse or recycle most of the materials of the
product you are disposing in a sound way.
The crossed out wheeled bin symbol informs you that the product should not be
disposed of along with municipal waste and invites you to use the appropriate
separate take-back systems for product disposal.
If you need more information on the collection, reuses, and recycling systems, please contact
your local or regional waste administration.
You may also contact your supplier for more information on the environmental performances
of this product.
For further information, please contact:
DLI
5570 Lee Street, Suite 12
Lehigh Acres, FL. 33971 USA
(800) 526-1299
Data Ltd. Inc. shall not be liable for use of our product with equipment (i.e., power supplies,
personal computers, etc.) that is not CE marked and does not comply with the Low Voltage
Directive
DLI 9200 PRODUCT MANUAL
PAGE 37/39
Rev. 3
DLI 9200 PRODUCT MANUAL
PAGE 38/39
Rev. 3
Download PDF