Manual

46ST – 46ST FS

Version 4.0

CONGRATULATIONS

You have purchased an ANDERSEN high quality winch. This product is a result of many years of development and experience in producing winches for sailboats. This winch gives you a high degree of functionality and many years of safe and easy sail handling.

TILLYKKE

De har købt et ANDERSEN spil af høj kvalitet. Dette produkt er et resultat af mange års udviklingsarbejde samt erfaring indenfor produktion af spil til sejlbåde.

Med dette spil får De funktionalisme på højt plan med henblik på at yde Dem en behagelig samt sikker sejlads.

Sehr geehrter ANDERSEN kunde, wir beglückwünschen Sie zu dem kauf einer ANDERSEN Winde, ein Produkt höchster Qualität, daß ein Resultat jahrelanger Entwicklungsarbeit und Erfahrung in der Produktion von Winden für

Segelboote ist. Die funktionalität dieser Winde ermöglicht Ihnen viele Jahre lang eine handliche und sichere Segelführung.

FÉLICITATIONS

Vous venez d`acheter un winch ANDERSEN de grande qualité. Ce produit est le résultat de longues années d’expérience et de développement dans la production des winches pour voilier.

Ce winch vous apportera de nombreuses années de fonctionnement sécurisant, pour une voile facile.

Frode Andersen

Managing Director

GENERAL INFORMATION

Due to the best choice of materials and high precision in manufacturing, we recommend, for normal use, only to dismantle, clean and lubricate the winch once every second year. Under extensive use, such as racing, charter or blue water sailing, we recommend to lubricate the winch once every year.

We strongly recommend always using ANDERSEN WINCH GREASE, when lubricating your winch. ANDERSEN WINCH GREASE is a high quality silicone/Teflon grease product.

Most other types of grease, including “marine grease” are not suitable for lubrication of winches.

Non-suitable grease products can cause malfunction, which could result in fatal injuries for the user and others.

Pawl arm springs should be replaced every second year. Spare arm springs and other parts that may be required are included in the ANDERSEN Service Kit. Please refer to the service instruction for the Service Kit suitable for the specific winch.

When the winch handle is not in use but the winch is under load, we recommend, from a safety point of view, to remove the winch handle from the winch.

To ensure correct function of the self-tailing unit, only use recommended line sizes. When using the winch with mooring lines DO NOT use the self-tailing function and be sure that the mooring line is not in contact with the self-tailing arm.

To ensure the best possible functioning of the winch, we recommend that the winch is placed in accordance with the line entry shown below.

Be also aware that self-tailing arm is positioned correctly. We recommend having the self-tailing arm positioned within the shaded area. On 12ST and 28ST the position of the self-tailing arm is fixed, making it very important to establish the proper location of the holes prior to drilling these in the deck. On all other models, the self-tailing arm can be placed in several different positions after having installed the winch.

INSTALLATION

46ST ver. 4.0 – 46ST FS ver. 4.0

Installing the winch is easy, if you follow these instructions. The numbers in ( ) refer to the position

2.

3.

4.

5. numbers in the parts list.

Tools required for the installation:

Allen key (4 mm).

Allen key (5 mm).

Allen key(6 mm).

Ø 8.5 mm. (11/32”) drill.

5 pcs. M8 (5/16”) bolts and nuts (length depending on deck thickness).

5 x large washers or backing plate.

Ring spanner to match nuts.

Bedding compound.

1. Drill bolt holes Ø8,5mm (11/32”) using the winch template. Be sure that no dust comes in

contact with the winch, while drilling.

Remove screws (1).

Remove self-tailing arm (2) and drum (4).

Apply a light coat of bedding compound, ensuring that each bolt hole is bedded. Keep drain grooves clear.

Fasten lower base (20) into place using 5 pcs. M8 (5/16”) bolts. Use large washers or a

6. Assemble in reverse order.

7. Check that the winch is functioning correctly:

The drum should operate smoothly, by turning the drum clockwise by hand.

The drum must not turn when trying to turn the drum anti clockwise.

While turning the winch handle clockwise the drum should turn slowly.

While turning the winch handle anti clockwise the drum should turn fast.

SERVICE INSTRUCTION

46ST ver. 4.0 – 46ST FS ver. 4.0

Tools required for service:

Allen key (4 mm.).

Allen key (5 mm.).

Screwdriver (small).

Winch handle.

ANDERSEN winch grease

1.

2.

3.

Remove screws (1).

Remove self-tailing arm (2) and drum (4).

Remove screws (15).

4.

5.

6.

Remove upper base (8), and place it in a safe and comfortable place before dismantling it !

Remove drive shaft (5). by using a finger or a winch handle.

To release the roller bearing (6), gently insert a small screwdriver between roller bearing and base plate (8). Remove roller bearing.

7.

8.

9.

Remove shafts (13.7, 14.7).

Remove and dismantle the two gear units.

Clean all parts in benzine. Remember to clean the gear teeth, roller bearing track and bushing inside the drum (4).

10. Assemble in reverse order. During assemble, by the use of a small soft brush lightly grease all gear teeth, drive shaft, roller bearing, shafts, pawls, springs and bushings. Pawls should only be lubricated with a very thin film of ANDERSEN WINCH GREASE. It is very important that pawls can move freely.

IMPORTANT: When assembling the winch, check the functioning of each pawl by pushing the pawl against the spring. The pawls should move smoothly and automatically return to their normal position, where the pawls engage with the teeth. If the pawls do not function correctly, clean and lubricate the pawls and gears. Check the function of the pawls again to make sure that it works correctly. If the pawls do not work correctly replace the springs and recheck the function.

Malfunctioning pawls may lead to unexpected failure of a loaded winch resulting in material damage or fatal personal injury.

Service Kit No. 19 (art. no. 710019) contains spare parts for this winch.

For current World Wide Distributor list please see: www.andersenwinches.com

NOTES:_____________________________________________

_____________________________________________________

_____________________________________________________

_____________________________________________________

_____________________________________________________

_____________________________________________________

_____________________________________________________

_____________________________________________________

_____________________________________________________

_____________________________________________________

_____________________________________________________

_____________________________________________________

_____________________________________________________

_____________________________________________________

_____________________________________________________

_____________________________________________________

_____________________________________________________

_____________________________________________________

_____________________________________________________

_____________________________________________________

_____________________________________________________

_____________________________________________________

_____________________________________________________

_____________________________________________________

_____________________________________________________

_____________________________________________________

_____________________________________________________

_____________________________________________________

_____________________________________________________

_____________________________________________________

_____________________________________________________

_____________________________________________________

_____________________________________________________

_____________________________________________________

_____________________________________________________

PARTS LIST

46ST ver. 4.0 – 46ST FS ver. 4.0

POS. QTY. DESCRIPTION

22.

3.

3.

3.2

3.3

1

1

1

1

Self-tailing top complete

Self-tailing top complete

Composite top

Top ring (only for 544530)

5 1 Drive shaft complete

5.1 1 O-ring

6. 1 Roller bearing complete

8.

11.

12.

13.

1

1

1

1

786810

735901

711210

RD100302

Base plate with bushings

Plug for deck plate

O-ring for plug

Small Ratchet gear complete

727400

Not removable 716503

775400

Not removable 734900

RD877000

783900

RD100342

775600

981410

524300

713200

713300

13.5 1

ISO7380-A4-M6

×12

734315

Model ST 544520

Model ST FS 544530

590300U

Model ST (only for 544520) 712200

595010

585100

13.7

14.

14.2

1

1

1

Ratchet gear wheel

Shaft for Small Ratchet gear

Ratchet gear complete

Pawl gear wheel

523000

523802

980300

775500

981410

523903

713300

713200

14.6

14.7

19.

19.

20.

20.

1

1

1

1

1

1

Ratchet gear wheel

Shaft for Ratchet gear

525500

525300

980410

DIN912-A4-M6X12

Model ST FS DIN912-A4-M6X8

Model ST DIN125-A4-M6

Base cover

Base cover

Model ST DIN6912-A4-M6X10

Model ST 735302

Model ST FS 735321

Deck plate for STE Below Deck motor and manual operated winch 746801

Deck plate STE Above Deck Compact motor 748102

713401

1

1

Sealing for Aluminium deck

Service kit No 19

Not included 775800)

710019

POS. 13

13.1

13.2

13.4

13.3

13.5

13.6

13.1

13.7

13

POS. 20

POS. 3

3.1

3.2

3.4

3.5

21

20

544520

775600

748102

EXPLODED VIEW

46ST ver. 4.0 – 46ST FS ver. 4.0

3

4

POS. 3

5.1

5

POS. 14

8

15

6

7

20

22

9

10

11 12

16 17 18

19

775500

14.1

14.2

14.3

14.4

14.5

14.6

14.1

544530

POS. 3

3.1

3.3

3.4

3.5

14.7

14

LIMITED WARRANTY

1.1 ANDERSEN issue a three-year warranty on all their products covering manufacturing and material defects on condition that the products are used in normal fashion. The warranty shall apply for three years from the moment ANDERSEN sell the product concerned (to the first buyer).

1.2 Within the period of the warranty, and in accordance with the terms of the warranty,

ANDERSEN undertake to replace or repair all defective components which have been used in normal fashion.

1.3 However, the warranty is subject to the limitations and exceptions outlined below.

2. Conditions and limitations:

2.1 ANDERSEN´s liability shall be limited to repair or replacement of components which are defective owing to manufacturing or material defects.

2.2 ANDERSEN assume no other liability than this, not even liability for indirect losses caused by defect concerned, including operating losses, loss of profits, or damage caused to real property or moveable property occurring while the product concerned is in the possession of the Buyer.

2.3 The Buyer alone shall bear the responsibility and risk involved as to whether the product is suitable for the application intended. ANDERSEN assumes no liability in this connection.

2.4 ANDERSEN assume no liability for defects which occur due to use of their products for purposes for which they are not intended, or for defects which occur owing to incorrect installation, corrosion, ultraviolet degradation, lack of maintenance, or any alteration or repair of the product carried out incorrectly by the Buyer. Finally, ANDERSEN assumes no liability for normal wear and tear, or for depreciation of value.

2.5 Nor do ANDERSEN assume any liability for service carried out by anyone other than authorised representatives of ANDERSEN, unless such service is carried out pursuant to guidelines laid down by ANDERSEN and in accordance with good craftsmanship.

2.6 The buyer shall inform ANDERSEN in writing of any defects with no undue delay once defects have been registered. Products being dealt with under the warranty shall be returned to ANDERSEN for repair unless any other agreement has been reached in writing.

2.7 ANDERSEN shall not cover costs incurred by the Buyer in connection with the transport or wages involved in a warranty case. Such costs shall be met by the Buyer in full.

3. Exceptions:

3.1 The warranty is only valid for one year in respect of components bought for the products concerned, such as electric motors, electric equipment, hydraulic pumps, motors and

valves.

3.2 ANDERSEN assume no liability for consequential damage of ships, equipment, property or people by defects in ANDERSEN’s products.

3.3 The company’s products are subject to continuous development, and consequently

ANDERSEN reserve the right to change designs and specifications without prior notice.