Extron electronics | FOXBOX 4G Rx DVI | FOXBOX 4G DVI - Extron Electronics

FOXBOX 4G DVI - Extron Electronics
fiber optics
FOXBOX 4G DVI
Fiber Optic Extender for DVI, Audio,
and RS-232
n Extends DVI, stereo audio, and
RS-232 control signals long distances
over a single fiber
n All digital, zero compression
technology for high performance
signal transmission
n Pixel-for-pixel image quality, up
to 1600x1200, including HDTV
1080p/60
n Daisy-chain capability
n Available as 850 nm multimode and
1310 nm singlemode models
n Real-time status LED indicators for
troubleshooting and monitoring
n Alarm notification for fiber link loss
n Auto Input Memory
n Low profile, mountable enclosures
FOXBOX 4G Tx DVI
FOXBOX 4G Rx DVI
The Extron FOXBOX 4G DVI Fiber Optic Extender is a transmitter and receiver
set for long haul transmission of DVI, audio, and RS-232 control signals over
a single fiber. Engineered for reliability and exceptional high resolution image
performance, it uses Extron’s exclusive all digital, zero compression technology,
and also includes a host of features for enhancing A/V system integration.
DESCRIPTION
Features
The Extron FOXBOX 4G DVI Fiber Optic Extender is a transmitter and receiver
nExtends single link DVI-D, stereo audio, and RS-232 control signals very
set for long haul transmission of DVI, audio, and RS-232 control signals
over a single fiber. Engineered for reliability and exceptional high resolution
image performance, it uses Extron’s exclusive all digital, zero compression
technology, to deliver perfect pixel-for-pixel transmission of computer-video
images up to UXGA (1600x1200) resolution, including HDTV 1080p/60.
Designed specifically for A/V systems, the FOXBOX 4G DVI also includes a
host of integrator-friendly features such as an EDID emulation mode, auto
input memory, RS-232 control from multiple locations, internal test patterns,
and real-time system monitoring. Compact, low profile enclosures allow for
discreet installation behind a flat-panel display, and multiple receivers can be
daisy-chained.
The FOXBOX 4G DVI is ideal for a wide range of applications requiring long
distance transmission of high resolution content with the highest quality.
Because transmission of content is inherently secure and immune to outside
interference, fiber applications are favored in government, military, and
medical environments. The FOXBOX 4G DVI transmitter and receiver feature
industry standard LC-type connectivity.
The FOXBOX 4G DVI MM supports multimode fiber at 850 nm, which is
typically used within buildings or facilities with moderate-range transmission
distances up to 150 meters (492 feet). The FOXBOX 4G DVI SM supports
singlemode as well as multimode fiber at 1310 nm. Singlemode fiber offers
long distances over a single fiber
nAll digital, zero compression technology provides pixel-for-pixel
performance with signals up to 1600x1200, including HDTV 1080p/60
nDaisy-chain capability – Several FOXBOX 4G DVI receivers can be daisychained so that displays in multiple locations can be served from a single
transmitter.
nAvailable as an 850 nm multimode model for moderate-range
transmissions, and a 1310 nm singlemode model for extreme distances
up to 30 km (18.75 miles)
nReal-time status LED indicators for troubleshooting and monitoring –
LEDs on the transmitter and receiver front panels verify the presence of DVI
and audio signals at the transmitter as well as active fiber links between the
units. Requires second fiber link.
nAlarm notification for fiber link loss – The FOXBOX 4G DVI can be set
up to trigger an external control system for immediate notification when a
fiber link has been lost. Requires second fiber link.
nAuto Input Memory – When activated, the FOXBOX 4G DVI receiver
automatically stores position and detail information based on the incoming
signal. When the same signal is detected again, these image settings are
automatically recalled from memory.
nEDID emulation mode – The FOXBOX 4G DVI transmitter provides a
(18.75 miles). It is used in very large facilities such as airports and stadiums, as
means for specifying the rate of the incoming DVI signal through the
RS-232 serial port. EDID emulation mode allows proper communication
with the DVI source.
well as connecting over very long distances between facilities such as university
nIndustry standard LC connectors provide reliable physical connectivity
long-range transmission capability over extreme distances of up to 30 km
campuses.
The FOXBOX 4G DVI transmitter accepts and digitizes unbalanced stereo
audio and RS-232 control signals, and transmits them along with the DVI-D
signals. An EDID emulation mode ensures that the transmitter properly
communicates with the DVI source. Several FOXBOX 4G DVI receivers may be
daisy-chained to support applications with displays in multiple locations.
At the FOXBOX 4G DVI transmitter, both transmitter and receiver can be
controlled and configured through RS-232. With a second fiber link installed,
functions for both units can be controlled at either location. Since the units
are typically situated far apart, this capability adds considerable versatility,
enabling adjustment and calibration of audio at the receiver. It also allows for
verification of fiber link status between the units as well as the presence of
DVI-D and audio input signals at the transmitter.
DVI-to-Analog RGB and Analog RGB-to-DVI Conversion
The FOXBOX 4G DVI transmitter and receiver are available separately. Either
device can be paired with the FOXBOX 4G VGA transmitter or receiver to
provide ultra-long distance transmission and conversion of DVI-D signals to
analog RGB and vice versa.
The FOXBOX 4G DVI receiver is also compatible with the FOX 500 and the
FOX 500 DA6 Six Output Fiber Optic Transmitter, which enables transmission
of analog RGB over up to six fiber links for distribution to multiple DVIequipped displays.
and precise fiber core alignment
n 30 user memory presets – In addition to Auto Memory, 30 user memory
presets on the FOXBOX 4G DVI receiver are available for saving and recall
of position and detail information for multiple incoming sources. The ability
to save and recall presets is useful in switcher-based environments.
nAudio gain & attenuation adjustment and muting capability
nRS-232 serial control at transmitter and receiver – The FOXBOX 4G
DVI transmitter and receiver feature RS-232 serial ports for control and
configuration.
nInternal test patterns for calibration and setup – Three test patterns are
available, including grayscale, color bars, and alternating pixels.
nCompatible with FOXBOX 4G VGA and FOX 500 transmitter and
receiver, and FOX 500 DA6 transmitter/distribution amplifier – Enables
ultra-long distance DVI-to-analog RGB and analog RGB-to-DVI conversion
without the need for extra signal conversion devices.
n1" (2.5 cm) high, quarter rack width metal enclosures – With a low
profile enclosure, both devices can be discreetly installed, such as behind a
plasma or LCD flat-panel display.
nExternal universal power supply included – Provides worldwide power
compatibility
specifications
NOTE: These transceivers are class 1 laser products. They meet the safety regulations
of IEC-60825, FDA 21 CFR 1040.10, and FDA 21 CFR 1040.11.
Optical fiber interconnection between transmitter and receiver
Number/type.................................... .1 or 2 fiber optic
Connectors........................................ .2 LC connectors
Operating distance
Singlemode..................................... .30 km (18.75 miles) with singlemode (SM)
cables with a FOXBOX 4G SM
Multimode...................................... .300 m (985') with 62.5 µm multimode (MM)
cables with a FOXBOX 4G MM
1 km (3280') with 50 µm multimode (MM)
cables with a FOXBOX 4G MM
2 km (6561') with 50 µm 2000 MHz
bandwidth laser optimized multimode cable
with a FOXBOX 4G MM
NOTE: Operating distance is approximate. These are typical maximum distances
that may vary depending on factors such as fiber type, fiber bandwidth, connector
splicing, losses, modal or chromatic dispersion, environmental factors, and kinks.
Nominal peak wavelength................ .850 nm for FOXBOX 4G MM, 1310 nm for
FOXBOX 4G SM
Data rate............................................ .4.25 Gbps
Transmission power
Singlemode..................................... .-5 dBm, typical
Multimode...................................... .-5 dBm, typical
Maximum receiver sensitivity
Singlemode..................................... .-18 dBm, typical
Multimode...................................... .-12 dBm, typical
Optical loss budget
Singlemode..................................... .13 dB, maximum
Multimode...................................... .7 dB, maximum
Video — FOXBOX 4G Tx/Rx DVI
NOTE: *Appropriate DVI-D to HDMI cables or adapters are required for HDMI signal
input/output.
NOTE: The FOXBOX 4G DVI Series can be used to distribute HDMI signals if you
use a DVI-to-HDMI adapter. However, when using HDMI signals, these units do not
transmit audio and CEC signals.
Resolution range............................... .Up to 1600x1200 or 1080p @ 60 Hz pixel for
pixel; higher resolutions up to 1920x1200 @
60 Hz, undersampled
Formats.............................................. .RGB and YCbCr digital video
Standards.......................................... .DVI 1.0, HDMI 1.2
Video input — FOXBOX 4G Tx DVI
Number/signal type.......................... .1 single link DVI-D (or HDMI*)
Connectors........................................ .1 female DVI-I
Video output — FOXBOX 4G Rx DVI
Number/signal type.......................... .1 single link DVI-D (or HDMI*)
Connectors........................................ .1 female DVI-I
Nominal level.................................... .0.8 Vp-p
Video delay........................................ .1-2 frames
Audio
Gain
Range.............................................. .Adjustable, -18 dB to +10 dB
Default............................................ .Unbalanced output: 0 dB
Frequency response.......................... .20 Hz to 20 kHz, ±0.5 dB
THD + Noise...................................... .0.10% @ 1 kHz at nominal level
S/N.................................................... .>80 dB at maximum output (unweighted)
CMRR................................................. .65 dB @ 20 Hz to 20 kHz
Audio bits per sample....................... .18 bits per channel, 2 channels (L, R)
Sampling rate.................................... .48 kHz
Audio input — transmitter
Number/signal type.......................... .1 unbalanced stereo or 2 unbalanced mono
Connectors........................................ .(1) 3.5 mm mini stereo jack
Impedance......................................... .18k ohms unbalanced, DC coupled
Nominal level.................................... .-10 dBV (316 mVrms)
Maximum level.................................. .+8.9 dBV, (unbalanced) at 1% THD+N
NOTE: 0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV ≈ 2 dBu
Audio output — receiver
Number/signal type.......................... .1 unbalanced stereo or 2 unbalanced mono
Connectors........................................ .(1) 3.5 mm mini stereo jack
Impedance......................................... .50 ohms unbalanced
Nominal level.................................... .-10 dBV (316 mVrms)
Maximum level (Hi-Z)....................... .+7.6 dBu, unbalanced at 1% THD+N
Maximum level (600 ohm)................ .>+6.3 dBu, unbalanced at 1% THD+N
Audio delay....................................... .1.5 frames
Control/remote
Serial control ports on each unit (transmitter and receiver)
Control............................................ .1 RS-232, 2.5 mm mini stereo jack (front
panel)
Pass-through................................... .1 RS-232, 3.5 mm captive screw connector,
5 pole (3 pins are used) (rear panel)
Baud rate and protocol
Control............................................ .9600 baud, 8 data bits, 1 stop bit, no parity
Pass-through................................... .9600 to 115,200 baud
Program control................................ .Extron’s control/configuration program for
Windows®
Extron's Simple Instruction Set (SIS™)
General
External power supply...................... .100 VAC to 240 VAC, 50-60 Hz, external; to
12 VDC, 1 A, regulated
Power input requirements................ .12 VDC, 0.6 A
Cooling.............................................. .Convection, vents on top and side panels
Mounting
Rack mount..................................... .Yes, with optional rack shelf
Furniture mount.............................. .Yes, with optional under desk mounting kit
Enclosure type................................... .Metal
Enclosure dimensions........................ .1.0" H x 4.3" W x 6.0" D (quarter rack wide)
(2.5 cm H x 10.9 cm W x 15.2 cm D)
(Depth excludes connectors.)
Product weight.................................. .0.7 lbs (0.3 kg) per unit, 1.4 lbs (0.6 kg) per
pair
Shipping weight................................ .3 lbs (2 kg) per unit, 6 lbs (3 kg) per pair
Vibration............................................ .ISTA 1A in carton (International Safe Transit
Association)
Regulatory compliance
Safety.............................................. .CE, CUL, FDA Class 1, UL
EMI/EMC......................................... .CE, C-tick, FCC Class A, ICES, VCCI
MTBF................................................. .30,000 hours
Warranty............................................ .3 years parts and labor
NOTE: All nominal levels are at ±10%.
NOTE: Specifications are subject to change without notice.
Model
FOXBOX 4G Tx DVI MM
FOXBOX 4G Rx DVI MM
FOXBOX 4G Tx DVI SM
FOXBOX 4G Rx DVI SM
Version Description
Part number
Multimode - Transmitter......................60-935-11
Multimode - Receiver..........................60-935-21
Singlemode - Transmitter.....................60-935-12
Singlemode - Receiver.........................60-935-22
Specifications are subject to change without notice.
aPPLICatION DIaGraM
Up to 30 km (18.75 miles)
singlemode fiber
SM Model
RS-232
FOXBOX
Control
Optional Second
Link for
Box to Box
Communications
M
AR
AL
DIO
AU
T
-D
DVI
PU
IN
OX
4G
Tx
I
DV
1
Tx
2
Rx
XB
FO
WER
PO
V
12 MAX
A
1.0
Extron
FOXBOX 4G Tx DVI
RS-232
Projector
Control
Fiber Optic Transmitter
Extron
SI 26X
Two-way Ceiling
Speakers
Extron
MPA 122
PC with DVI Output
Mini Power
Amplifier
M
AR
AL
DIO
AU
TP
-D
DVI
DE
Extron
FOXBOX 4G Rx DVI
WER
PO
V
12 MAX
A
1.0
MO
OU
1
Tx
UT
OX
4G
Rx
Audio
Output
RS-232
2
Rx
I
DV
XB
FO
Fiber Optic Receiver
Projector
PaNeL DraWINGs
Rx
FOXBOX 4G Tx DVI
AUDIO
Tx Rx
1
www.extron.com
LINK
DVI
LINK
OPTICAL
MODE
DVI-D OUTPUT
AUDIO
FOXBOX 4G Rx DVI
RS-232
OVER FIBER ALARM
Tx Rx
1
2
FOXBOX 4G Rx DVI - Back
Extron USA - West
+1.714.491.1500
+1.714.491.1517 FAX
POWER
12V
1.0A MAX
2
FOXBOX 4G Tx DVI - Back
Inside USA / Canada Only
AUDIO
FOXBOX 4G Rx DVI
RS-232
OVER FIBER ALARM
FOXBOX 4G Tx DVI
+800.633.9876
Rx
FOXBOX 4G Rx DVI - Front
DVI-D INPUT
Headquarters
CONFIG
OPTICAL
FOXBOX 4G Tx DVI - Front
POWER
12V
1.0A MAX
OVER
TEMP
CONFIG
LINK
Tx
LINK
DVI
AUDIO
OVER
TEMP
Tx
Extron USA - East
Extron Europe
Extron Middle East
Extron Asia
Extron Japan
Extron China
+800.633.9876
+800.3987.6673
+971.4.2991800
+971.4.2991880 FAX
+800.7339.8766
+81.3.3511.7655
+81.3.3511.7656 FAX
+400.883.1568
Inside USA / Canada Only
Inside Europe Only
+1.919.863.1794
+1.919.863.1797 FAX
+31.33.453.4040
+31.33.453.4050 FAX
Inside Asia Only
+65.6383.4400
+65.6383.4664 FAX
© 2009 Extron Electronics. All rights reserved. All trademarks mentioned are the property of their respective owners.
Inside China Only
+86.21.3760.1568
+86.21.3760.1566 FAX
08-06
68-1586-01
REV. A
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising