null  User manual
Concealed shower mixer
Installation Instruction
Please read this instruction carefully to avoid any
difficulty during installation.
Components List
No.
Component
Quantity
1
Plastic sleeve
2
2
Cross-head screw
2
3
Main body
1
4
Red index
1
5
Cover
1
6
Plate
1
7
Sealing strip
1
8
Ceramic cartridge
1
9
Cartridge fastener
1
10
Cap
1
11
Plug
1
12
Female allen screw
1
13
Handle
1
14
Flat washer
1
15
Cross-head screw
1
16
Index
1
17
Safe cover
1
18
Blue index
1
Installation Step
Installation Fig
1
Flow rate Curves
L/min
35
Test pressure: 1.6MPa (16bar)
30
Flow pressure:
25
2
Min 0.05MPa
20
4
Max 1.60MPa
15
10
5
1
5
0
0.1 0.2 0.3 0.4 0.5 1
3
After installing the main body, read the index on cover , install the decorating tiles
and glue the plate (3).
2
Read the Installation Fig and confirm the installing position.
Test:
Open the supply pipes, close the ceramic cartridge and check the connections
for leakage; open the ceramic cartridge and check the smooth water flow. Decorate
the wall after checking and remove the safe cover. Install the escutcheon and handle.
Recommended pressure:
Bar
2
0.1MPa to 0.8MPa (1 to 8 bar)
3
Note
1.Ensure proper cleaning of the water supply pipe before
installation to avoid any jammed.
2.The cold-water supply must be connected on the right and
the hot-water supply must be connected to the left.
3.Check the installation dimensions according to the Figure and
ensure it is installed correctly.
o
4.Hot-water inlet temperature must not be over 80 C.
PZMF123700(2)
2009.05.14
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement