Central Pneumatic | 99959 | Specifications | Central Pneumatic 99959 Specifications

Central Pneumatic 99959 Specifications
2014
HVAC & BUILDING MAINTENANCE
RAM-PRO-XL
™
The new revolutionary chiller tube cleaner
with TubeGuard™ technology
WWW.GOODWAYBENELUX.NL │+31 (0) 485 - 31 64 40
02
COIL CLEANERS &
ACCESSORIES
06
COOLING TOWER
CLEANERS
09 - 13
14 - 20
21 - 22
25 - 26
09
TUBE CLEANERS, FLEXIBLE
SHAFTS & ACCESSORIES
Chemical Descaling Machines....................................................................................... 23
ScaleBreak®, ScaleBreak-SS & ScaleBreak-PT Descaling Solutions............................ 24
23
CHEMICAL DESCALERS
28
FIRETUBE BOILER
CLEANERS
34
SURFACE CONDENSER
CLEANERS
41
HYDRAULIC HOSE
CLEANERS
44
TEST & INSPECTION
EQUIPMENT
47
DUCT CLEANERS
60
VACUUMS &
ACCESSORIES
54
PRESSURE WASHERS
52
MOLD REMEDIATION
COIL CLEANERS
Wet Coil Cleaners.................................................................................................... 02 - 03
Dry Coil HEPA Vacuum................................................................................................... 03
Coil Cleaner Accessories and Chemicals............................................................... 04 - 05
COOLING TOWER CLEANERS
Cooling Tower Cleaning Systems........................................................................... 06 - 08
TUBE CLEANERS, FLEXIBLE SHAFTS AND ACCESSORIES
Chiller/Condenser Tube Cleaners for Tubes 6.35 mm - 25.4 mm I.D.....................
Flexible Shafts and Accessories.............................................................................
Accessories for Tube Cleaning 25.4 mm I.D. and Up.............................................
Small I.D. Tube Cleaner...........................................................................................
CHEMICAL DESCALERS
FIRETUBE BOILER CLEANERS
Boiler Tube Cleaners & Vacuums............................................................................ 28 - 33
SURFACE CONDENSER CLEANERS
Tube Cleaning Guns and Systems.......................................................................... 34 - 36
Tube Scrubbers, Brushes and Scrapers................................................................. 37 - 40
HYDRAULIC HOSE CLEANERS
Pneumatic Cleaning Guns............................................................................................... 41
Nozzles and Foam Projectiles................................................................................. 42 - 43
TEST AND INSPECTION EQUIPMENT
Video Scopes.................................................................................................................. 44
Tube Leak Detector......................................................................................................... 45
Stack Efficiency Tester.................................................................................................... 46
DUCT CLEANERS
Rotary Duct Cleaner & Negative Air Machines........................................................ 47 - 49
Duct Cleaner Accessories....................................................................................... 50 - 51
VACUUMS AND ACCESSORIES
Vacuum Comparison Grid....................................................................................... 52 - 53
Vacuums......................................................................................................................... 54
PRESSURE WASHERS
Pressure Washer............................................................................................................ 55
MOLD REMEDIATION
Mold Remediation Chemicals and Sprayer............................................................. 56 - 57
TubeGuard™-XL
A custom formulated tablet for corrosion
inhibition of copper and ferrous metal
tubes. Safe to handle, completely
biodegradable and designed with
environmentally friendly chemicals.
Page 10
WWW.GOODWAY.COM
1
INNOVATIVE MAINTENANCE SOLUTIONS
GOODWAY’S GLOBAL MARKET
As the world has become smaller and smaller, Goodway’s business presence in it has become larger and larger. Today, Goodway products are in use in almost every
country in the world, and on all seven continents, including Antarctica!
To better serve our customers, Goodway has expanded its operation to include sales and service arms throughout North, Central and South America, Europe, the
Middle and Far East, Asia, Africa and Australia. Beyond maintaining a successful presence in these markets, Goodway catalogs are now available on-line in a variety
of languages. This is a direct result of Goodway’s continued success in the world maintenance market. As Goodway continues its worldwide expansion, Goodway’s
world will always revolve around you...our customer.
GLOBAL SALES AND DISTRIBUTION CENTERS
Goodway has sales and distribution centers located in the following countries: Argentina, Australia, Bolivia, Brazil, Chile, China, Colombia, Costa Rica, Ecuador,
Egypt, El Salvador, England, Finland, France, Germany, Greece, Guatemala, Honduras, Ireland, Italy, Japan, Korea, Libya, Malaysia, Mexico, Netherlands, New
Zealand, Nicaragua, Nigeria, Norway, Pakistan, Peru, Philippines, Rumania, Russia, Saudi Arabia, Singapore, South Africa, Spain, Switzerland, Taiwan, Thailand,
Trinidad, Turkey, United Arab Emirates, Venezuela and Vietnam.
AQ-RV450
Duct Cleaner,
Page 49
RAM-PRO-XL
™
Tube Cleaner,
Page 11
TubeGuard™ BLRX
Boiler Tube Corrosion Inhibitor,
Page 32
GPW-1300
New For 2014!
Pressure Washer,
Page 55
JetLaunch® -XL
Large Hose & Pipe Cleaner,
Page 41
SAM-JR
Boiler Tube Cleaner,
Page 30
Soot-Vac® JR
Boiler Tube Cleaner Vacuum
Page 31
ScaleBreak-PT
Potable Water Descaler,
Page 24
GUARANTEE Every Goodway product is backed by over 40 years of experience. We PROVEN RESULTS Our reputation has allowed us to keep the same customers
for years. Ask around and you’ll find that we are known for reliability and customer
guarantee satisfaction with everything we sell.
support. It’s the reason why we’ve been growing and expanding for over 40 years.
CUSTOMER SERVICE Our dedicated and knowledgeable distributors and customer
service staff are on call to answer any product questions you may have. If they can’t STAY GREEN We’ve always been green! While the rest of the world is just
catching on, Goodway has always been committed to greater energy efficiency since
answer your question, they will find someone who can.
we started. Our products will help keep your mechanical equipment running at peak
efficiency, saving energy and money, and producing less pollutants.
© Copyright 2014 Goodway Technologies Corporation, Stamford, Connecticut, USA. Goodway is a Trademark of Crossford International LLC.
CoilPro® High Flow Coil Cleaner
IDEA
L FO
MICR R CLEAN
IN
OCHA
NNEL G
S
FEATURES
> 28 BAR at 11,4 LPM
> Siphon tube to inject chemicals
at 10:1 ratio
> 3,7 m hose (additional 3,7 m extension
hoses available)
> 915 mm sectional 9,5 mm diameter
stainless steel condenser wand
> 460 mm wand with two nozzles
(soap and flat spray)
> Wide variety of custom attachments
Specifications
CC-400HF
Motor Power:
Input Power:
0.75 kW
15 Amps, 115 V, 50/60 Hz AC
Optional: 15 Amps, 230V, 50/60 Hz AC
Power Supply Cord:
7,6 m, 14-3
Water Requirements:
Minimum 1,4 BAR at 13,2 LPM
Output Water Pressure:
28 BAR
Output Water Flow:
11.4 LPM
Pump:
Axial
Dimensions:
330mm High x 760 mm Wide x 300 mm Deep
Weight:
20 kg, Net Dry
Optional:
RCC-13 Extension hose, 3,7 m
QDN-LP25 Replacement Foaming Nozzle
QDN-1512Y Replacement Flat Spray Nozzle
RCC-10-SK Water Seal Kit
COILSHINE Coil cleaning solution, case of four
3,8 liter bottles
2
FEATURES
> Deep cycle 12 V rechargeable battery
(CC-JR, CC-100 and CC-140)
> Integrated water tank
(CC-JR, CC-100, CC-140 and CC-600)
> Integrated chemical tank
(CC-JR, CC-100 CC-140 and CC-600)
> Control valve to inject chemicals
> Wand and custom nozzles
> Wide variety of custom attachments
Coil Cleaner
PATENT PENDING
High Flow
Coil Cleaner
BackPack
Coil Cleaner
High Flow
Coil Cleaner
Compact
Coil Cleaner
Specifications
CC-JR
CC-100
Specific Models Only
CC-140
CC-600
COIL MAINTENANCE
CoilPro® Coil Cleaners
CC-400HF
Motor Power:
Input Power:
0,15 kW
0,07 kW
0,15 kW
1 kW
0.75 kW
12 Amps, 12 V, DC Rechargeable VRLA Battery 4 Amps, 12 V, DC Rechargeable VRLA Battery 3 Amps, 115 V, 50/60 Hz AC or 12 Amps, 12 V,
13 Amps, 115 V, 60 Hz AC
15 Amps, 115 V, 60 Hz AC
•
•
DC Rechargeable VRLA Battery
Optional: 6,5 Amp, 230 V, 50 Hz AC
Optional: 15 Amps, 230 V, 50/60 Hz AC
•
•
Optional: 1,5 Amp, 230 V, 50/60 Hz AC
•
•
Recharge Power:
0,3 Amp, 115 V, 50/60 Hz AC
0,3 Amp, 115 V, 50/60 Hz AC
1 Amp, 115 V, 50/60 Hz AC
•
•
Optional: 0,2 Amp, 230 V, 50/60 Hz AC
Optional: 0,15 Amp, 230 V, 50/60 Hz AC
Optional: 0,5 Amp, 230 V, 50/60 Hz AC
•
•
Power Supply Cord:
•
•
11,3 m, 14-3 GFCI
11,3 m, 14-3 GFCI
7,6 m, 14-3 GFCI
Water Requirements:
On-Board
On-Board
On-Board or Minimum 1,4 BAR at 5,7 LPM On-Board or Minimum 1,4 BAR at 7,9 LPM
Minimum 1,4 BAR at 13,2 LPM
Output Water Pressure:
8,6 BAR
2,8 to 6,9 BAR
2,8 to 9,7 BAR
41 BAR
28 BAR
Output Water Flow:
1 to 2,3 LPM
1 to 1,9 LPM
1 to 3,8 LPM
6 LPM
11,4 LPM
Pump:
Positive Displacement Diaphragm
Positive Displacement Diaphragm
Positive Displacement Diaphragm
Positive Displacement Piston
Axial
Hose:
3 m, Reinforced, Self Coiling
3 m, Reinforced, Self Coiling
7,6 m, Reinforced
7,6 m, Reinforced
3,7 m, Reinforced
Wand(s):
915 mm, Stainless Steel (9.5 mm Diameter)
460 mm, Plated Steel
460 mm, Plated Steel
460 mm, Plated Steel
915 mm, Stainless Steel (9,5 mm Diameter)
•
•
•
•
and 460 mm, Plated Steel
Nozzle:
Two Quick Connect
Three Quick Connect
Four Quick Connect
Three Quick Connect
Two Quick Connect
Water Tank:
12,5 Liter, Internal
19 Liter, Internal
19 Liter, Internal
19 Liter, Internal
•
Chemical Injector:
Upstream, Adjustable at 30:1 to 6:1 Ratio
Upstream at 6:1 Ratio
Upstream at 6:1 Ratio
Upstream at 6:1 Ratio
Upstream at 10:1 Ratio
Chemical Tank:
1,7 Liter, Internal
2,8 Liter, Internal
19 Liter, Internal
19 Liter, Internal
•
Dimensions:
480 mm High x 460 mm Wide x 250 mm Deep 610 mm High x 480 mm Wide x 350 mm Deep 1.120 mm High x 660 mm Wide x 460 mm Deep 1.120 mm High x 660 mm Wide x 460 mm Deep 330 mm High x 760 mm Wide x 300 mm Deep
Weight:
9 kg, Net Dry
11 kg, Net Dry
34 kg, Net Dry
39 kg, Net Dry
20 kg, Net Dry
CoilVac® Dry HEPA Vacuum
FEATURES
> Large HEPA filter – 99.97% efficient
at 0.3 microns
> 1,9 liter paper filter collection bag
> Matching intake and exhaust couplings
allows for use as a vacuum or a blower
> Two speed settings to match application
> Steel tank and chromed end caps
> Carrying handle and shoulder strap
> Custom accessories specifically
designed for coil cleaning applications
Specifications
CVC-100
Motor Power:
Input Power:
3 kW
12 Amps, 115 V, 50/60 Hz AC
Optional: 6 Amps, 230 V, 50/60 Hz AC
7,6 m, 18-3
1,8 m (low Speed) to 2,3 m (High Speed)
102 m3/h (low Speed) to 119 m3/h (High Speed)
5 Microns Paper Bag, 15 Microns Cloth, Foam and 0.3 Micron HEPA
1,9 Liters
58 dBA (low Speed) to 68 dBA (High Speed)
Vacuum or Blower
460mm Long x 170 mm Diameter
4,1 kg
Power Supply Cord:
Static Water Lift:
Air Displacement:
Filtration:
Dry Capacity:
Noise Level:
Special Features:
Dimensions:
Weight:
3
Coil Cleaner Accessories
WONDER WAND
SHOWN AT
ACTUAL SIZE
OF 9,5 mm
DIAMETER
The ultra thin Wonder Wand is designed to slip between the fan guard grating of
condenser units, allowing you to thoroughly clean the coils from the inside, without
having to remove the top of the unit. Spraying the coils in this direction, opposite to
normal air flow, provides for a more thorough cleaning of the unit.
8945 Wonder Wand, 90° Spray Wand, 910 mm (for CC-JR, CC-100, CC-140 and CC-600)
8945-48 Wonder Wand, 90° Spray Wand, 1.220 mm (for CC-JR, CC-100, CC-140 and CC-600)
NOZZLES, EXTENSION WANDS AND ADAPTERS
8945-FLEX-24 Flexible Extension Wand, 610 mm (for CC-JR, CC-100 and CC-140)
9618 Rollover Nozzle Assembly
9650 Flexible Extension Wand, 250 mm
9654 Pinpoint Foaming Nozzle
9655 Extension Wand, 460 mm
9656 Extension Wand, 610 mm
9657 Extension Wand, 910 mm
9658 Extension Wand, 1.220 mm
9659 Extension Wand, 1.520 mm
QDN Quick Connect Nozzles
Note: When placing order, specify nozzle spray pattern and machine (i.e. 25° cleaning nozzle for CC-140).
QDN-45 Adapter, 45°
QDN-90 Adapter, 90°
WHEEL AND DOLLY KIT
This kit allows you to attach wheels and a dolly handle to the CC-100 Backpack
CoilPro for easy mobility.
9683 Wheel and Dolly Kit
COILVAC® DOLLY MOUNTING KIT
This kit allows you to attach the CoilVac to either a CC-140 or CC-600 CoilPro to create
a complete coil cleaning system. The kit’s brackets and accessory bin attach to the
CoilPro’s dolly with no modifications needed. All fastening hardware is included, just
bolt on the two support brackets and the accessory bin. The CoilVac can be used
while mounted to the dolly, and the bin holds all the tools and extra collection bags
you may need in a compact and efficient package.
CVC-CC-BRACKET CoilVac Dolly Mounting Kit to attach the CoilVac to a
CC-140 or CC-600 CoilPro Coil Cleaner
4
COIL MAINTENANCE
Coil Cleaner Chemicals
COILSHINE ®
CoilShine is an environmentally friendly, biodegradable, expanding foam detergent
specifically formulated for use with the CoilPro. This unique solution penetrates deep
into coil beds for thorough cleaning. It is user friendly, non-acidic, and non-fuming,
allowing it to be used in occupied areas and safely washed down drains.
COILSHINE Coil Cleaning Solution, one case (four 3,8 liter bottles)
COILSHINE-5 Coil Cleaning Solution, 19 liter bucket
COILSHINE-55 Coil Cleaning Solution, 208 liter drum (not shown)
COILSHN-XC-4X1 Coil Cleaning Solution Concentrate, 1 gallon bottle, 5 gallon
bucket, (30 gallon drum, 55 gallon drum, 275 and 330 gallon tote, not shown)
>
COILSHINE-BC
Coil before cleaning
with CoilShine.
>
Coil after cleaning
with CoilShine.
CoilShine-BC (Bio-Clean) is EPA registered for application to all components of HVAC
systems. It is an environmentally friendly, commercial grade, biodegradable, readyto-use Bacteriostat, Fungistat and Mildewstat. It is formulated to be applied with the
CoilPro in air handlers, air ducts, drain pans and other HVAC components to help
prevent the growth of odor, stain and damage causing organisms including bacteria,
fungi, mold and mildew.
COILSHINE-BC Bacteria, Fungi, Mold and Mildew Inhibitor Solution, one case
(four 3,8 liter bottles)
DRAIN PAN BIOCIDE TABLETS
Got condensate drain pans? Then you’ve got trouble! HVAC condensate drain pans are
breeding grounds for slime, sludge and toxic bacteria like Legionella Pheumophila
(Legionnaire’s Disease). Not only can this build up of debris cause clogging of the drain
lines resulting in water overflow and damage to the building, but the bacteria can become
airborne resulting in “sick building syndrome” and health problems for the building’s
occupants. How can you fight this harmful build-up of debris in your drain pans? Use
PanCare from Goodway on a regular basis! PanCare is an EPA registered biocide. It is
formulated to help prevent the build-up of slime and bacteria in HVAC condensate drain
pans. It kills 99% of Legionella Pheumophila and Salmonella Typhii Bacteria. It also
contains a rust inhibitor. Each tablet is weighted to prevent floating and will work for up
to 3 months, on a on a 2,7 to 4,5-metric ton on or a 40-metric ton system (depending on
tablet) providing a constant release of biocide into the water.
PANCARE-24 Pancare Tablets for a 2,7 to 4,5-metric ton system, one case (24 tablets)
PANCARE-45-6 Pancare Tablets for a 40-metric ton system, one case (6 tablets)
5
TowerWash Cooling Tower Fill Cleaner
FEATURES
FEATURES
>Integrated continuous duty air compressor for enhanced foam
production
>Custom wand extensions and nozzles
>Heavy-duty, chemical resistant components and dolly
>Platform to hold one standard 19 liter chemical container
>Water hose connection to dilute cleaning solution or provide a
clean water rinse
>Hose, wand and tool holders
> Heavy-duty construction
>7.62 m steel reinforced hose
>914 mm stainless steel wand
>Variable pressure nozzle
>Can use hot water
>Locking casters
>Pressure Regulator
>Pulse Control
Specifications
TFC-100
Specifications
GPW-1400
Compressor Output:
Input Power:
4,1 BAR at 28 LPM
5 Amps, 115 V, 60 Hz AC
Optional: 5 Amps, 115 V, 50 Hz; 2,5 Amps, 230 V, 60 Hz;
or 2,5 Amps, 230 V, 50 Hz
76 LPM
Same as Supplied
6 LPM
Positive Displacement Diaphragm
1.220 mm High x 480 mm Wide x 660 mm Deep
39 kg, Net Dry
Motor Power:
Input Power:
1.12 kW
Standard: 15 Amps, 115 V, 60 Hz AC
Optional: 15 Amps, 115 V, 50 Hz; 7.5 Amps, 230 V, 60 Hz;
or 7.5 Amps, 230 V, 50 Hz
11 m, 14-3 GFCI
Minimum 1,7 BAR at 8.3 LPM
Adjustable, 7-97 BAR
6.4 LPM
1016 mm (H) x 356 (W) x 533 (D)
43 kg, Net Dry
Output Foaming Volume:
Output Water Pressure:
Output Water Flow:
Pump:
Dimensions:
Weight:
Power Supply Cord:
Water Requirements:
Output Water Pressure:
Output Water Flow:
Dimensions:
Weight:
TOWERSHINE
TowerShine is an environmentally friendly, biodegradable, expanding foam detergent specifically formulated for
use with the TowerWash.
TOWERSHINE-5 Cooling Tower Fill Cleaning Solution, 19 liter bucket
6
FEATURES
>Stainless steel construction
>Heavy-duty motor removes up to 189 liters
of water and debris per minute
>Semi-automatic pump primer
>Adjustable flow control
>In-line sediment filter
>Quick connect hoses and tools
>Easy storage of accessories
Specific Models Only
PATENTED
Specifications
CTV-1501
Motor Power:
Input Power:
1 kW
15 Amps, 115 V, 60 Hz AC
Optional: 15 Amps, 115 V, 50 Hz; 6,2 amps, 230 V, 60 Hz;
or 6,2 amps, 230 V, 50 Hz
6,4 m, 14-3 GFCI
7,6 m
Variable, 0-189 LPM
5 mm Sediment Capture
Centrifugal
890 mm High x 560 mm Wide x 530 mm Deep
57 kg, Net Dry
Power Supply Cord:
Static Water Lift:
Water Displacement:
Filtration:
Pump:
Dimensions:
Weight:
COOLING TOWER MAINTENANCE
TowerVac™ Cooling Tower Vacuum
CTV-KIT-1501 Cooling Tower Vacuum
Accessory Kit 40 mm: 7,6 m vinyl
crush proof extension hose, 910 mm
extension tube, 510 mm floor brush,
300 mm paddle tool, 460 mm bulk
pickup tool, and 150 mm utility brush
Note: Call for additional accessories.
7
TowerVac™ Filtration System
FEATURES
> Reusable filters
> Quick lock lids
> Quick connect hoses and tools
Specifications
CTV-F2
Input Water Pressure:
Filters:
Maximum 2,1 BAR at 189 LPM
Two reusable synthetic,
3,7 square meter, 5 micron media
970 mm High x 510 mm Wide x
510 mm Deep
32 kg, Net Dry
Dimensions:
Weight:
Replacement Filters:
9703 Replacement Filter
9703-6 Replacement
filters (package of six)
8
RAM-PRO™ Rotary Tube Cleaner
TUBE CLEANERS
Rugged and Dependable
The powerful RAM-PRO handles the demanding
environment of commercial contracting work like no
other tube cleaner.
Designed for contractors: Sturdy roll cage protects
the RAM-PRO at the job site and in the back of a
crowded work truck.
Saves time: Quick Connect shaft attaches with a
simple push – and quickly disassembles for transport.
Peak on-site performance: No more slipped belts
or equipment down time. Chain drive system replaces
traditional rubber belt for smooth performance in
challenging situations.
Handles rough environments: Motor assembly is
connected with vibration isolators to help tolerate
bumps and jolts.
Compact and lightweight: Easy to carry and less
than 1/2 the weight of other tube cleaners.
FEATURES
> Heavy-duty roll cage construction
> Ultra compact design
> Quick connect threadless shaft manifold
> Interchangeable flexible shafts
> Interchangeable cleaning brushes and tools
> “Sweet Spot” 862.5 RPM
> Simultaneous water flush
> Forward and reverse foot switch activation
PATENT PENDING
Specifications
RAM-PRO
Application:
Tube Size Range:
Motor Power:
Smooth Bore and Enhanced Tubes
6,4 to 25,4 mm I.D.
0,19 kW (115 V Model)
0,37 kW (230 V Model)
5,5 Amps, 115 V, 60 Hz AC
Optional 5,5 Amps, 115 V, 50 Hz;
4,5 Amps, 230 V, 60 Hz; or 4,5 Amps, 230 V, 50 Hz
3 m, 18-3 GFCI
862,5 RPM
Manual
Maximum 22,9 m
Minimum 2,1 BAR at 7,6 LPM
Roll Cage
Quick Connect Threadless Shaft Manifold
Reversible Shaft Rotation
Water Flush
405 mm High x 230 mm Wide x 510 mm Deep
15 kg Net Dry
Input Power:
Power Supply Cord:
Shaft Speed:
Shaft Feed Method:
Shaft Length:
Water Requirements:
Special Features:
Dimensions:
Weight:
9
TubeGuard-XL™ Corrosion Inhibitor
1
CLEAN
> Variable shaft speed
> Reversible shaft rotation
> Simultaneous flush of
TubeGuard-XL chemical
2
DISINFECT
> TubeGuard-XL tablet
eliminates biofilm
3
PROTECT
> TubeGuard-XL tablet
prevents corrosion
TubeGuard™-XL – It’s Revolutionary!
A custom formulated tablet design is the best available
technology for corrosion inhibition of copper and ferrous metal
tubes. The TubeGuard-XL tablet is safe to handle, completely
biodegradable and designed with environmentally friendly
chemicals. Specifically designed to work with the all new RAM-PRO-XL,
this revolutionary tube cleaning process will forever change
the ease and effectiveness of both eliminating bio-film and
preventing corrosion. No measuring or dosing of chemicals is
required. The TubeGuard-XL tablet simply dissolves in the RAM-PRO-XL’s
on-board reservoir during tube cleaning; flushing the tubes in
FDA certified bio-film removal compounds.
TUBEGUARD-XL
Package of four tube cleaning tablets (for 3 average sized chiller cleanings). For use with the
RAM-PRO-XL
10
RAM-PRO-XL™ Rotary Tube Cleaner
TUBE CLEANERS
RAM-PRO-XL – It’s A Game Changer!
The RAM-PRO-XL is an innovative new tube cleaner that utilizes
TubeGuard technology with a custom formulated tablet designed
specifically for chiller tubes. The XL version is the more powerful big
brother to the popular RAM-PRO introduced 2 years ago. The TubeGuard
tablet dispenser along with variable shaft speed control and reversible
shaft rotation makes it the most advanced portable tube cleaner
available today.
RAM-PRO-XL
Tube cleaner w/ quick connect manifold, integrated roll cage/dolly, two direction foot
switch (115V, 50/60 Hz)
RAM-PRO-XL-A (230V, 50/60 Hz)
FEATURES
> On-board TubeGuard dispensing system
> Heavy-duty roll cage construction with integrated dolly
> 0.372 kW motor
> Direct Drive
> Quick connect threadless shaft manifold
> Interchangeable cleaning tools
> Variable shaft speed
> Reversible shaft rotation
> Simultaneous water flush
> Power cord and foot pedal storage
Specifications
RAM-PRO-XL
Standard: .372kW
Standard: 5.5 amps, 115 V, 50/60 Hz AC
Optional: 3 amps, 230 V, 50/60 Hz AC
6.4 m, 14-3 GFCI
Power Supply Cord:
Variable 0-900 rpm
Flexible Shaft Speed:
2.068 BAR at 7.57 LPM
Water Requirements:
508 mm High x 406 mm Wide x 660 mm Deep
Dimensions:
24.94 kg, Net Dry
Weight:
Motor Power:
Input Power:
11
Rotary Tube Cleaners
*Manual or Mechanical
Shaft Feed
Tube Size
Range:
RAM-PRO
Wet, Smooth Bore and
Enhanced tubes
RAM-PRO XL
Wet, Smooth Bore and
Enhanced tubes
RAM-4
Wet, Smooth Bore and
Enhanced tubes
RAM-5SFVS
Wet and Smooth Bore tubes
(with manual or mechanical feed)
6,35 mm - 25,4 mm I.D.
6,35 mm - 25,4 mm I.D.
6,35 mm - 25,4 mm I.D.
6,35 mm - 25,4 mm I.D. (manual)
.375 kW
.375 kW
.559 kW
1.112 kW
Standard: 5.5 amps,
115 V, 60 Hz AC
Standard: 10 amps, 110 V,
50/60 Hz AC
Standard: 9 amps, 115 V,
60 Hz AC
Standard: 12 amps, 115 V,
60 Hz AC
Standard: 15 amps, 115 V,
60 Hz AC
Optional: 5.5 amps, 115 V, 50 Hz;
Optional: 10 amps, 230 V,
50/60 Hz AC
Optional: 9 amps, 115 V, 50 Hz;
Optional: 12 amps, 115 V, 50 Hz;
Optional: 15 amps, 115 V, 50 Hz;
4.5 amps, 230 V,
60 Hz; or
6 amps, 230 V,
60 Hz; or
7.5 amps, 230 V,
60 Hz; or
4.5 amps, 230 V,
50 Hz
6 amps, 230 V,
50 Hz
7.5 amps, 230 V,
50 Hz
6,40 m, 14-3 GFCI
6,40 m, 14-3 GFCI
6,40 m, 14-3 GFCI
6,40 m, 14-3 GFCI
•
•
4.5 amps, 230 V,
60 Hz; or
4.5 amps, 230 V,
50 Hz
Power
Supply Cord:
6,35 mm - 25,4 mm I.D.
11,09 mm - 25,4 mm I.D. (mechanical)
Motor Power: .186 kW (115 V)
.375 kW (230 V)
Input Power:
RAM-6
Wet, Smooth Bore and Enhanced
tubes (with 500 PSI water flush)
3,65 m, 18-3 GFCI
•
Air
Requirements:
•
•
Shaft Speed:
862.5 rpm
Adjustable,
0-900 rpm
862.5 rpm
Adjustable,
200-862.5 rpm
Adjustable,
200-800 rpm
Shaft Length:
Standard up to 22,86 m
Standard up to 22,86 m
Standard up to 22,86 m
Standard up to 22,86 m
Standard up to 22,86 m
Special
Features:
Reversible shaft rotation
Direct Drive
Reversible shaft rotation
Variable speed
Water flush
Roll cage with integrated wheels
and handle
Reversible shaft rotation
(optional)
Water flush
Water flush
Reversible shaft rotation
Chain Drive
Chemical injection
Quick connect shaft manifold
Up to 500 PSI water flush
Mechanical feed
up to 3’ per second
Quick connect shaft manifold
Chain Drive
Quick connect shaft manifold
On-board chemical applicator
Quick connect shaft manifold
Roll cage
Mechanical feed force at 50 lbs
ROTATING
BRUSH
FEATURES
>Heavy-duty construction
>Quick connect threadless shaft manifold
>Interchangeable wet, dry and high temperature flexible shafts
>Interchangeable cleaning brushes and tools
>Simultaneous water flush or vacuum (depending on model)
>Foot switch or gun activation (depending on model)
Specific Models Only
12
Specific Models Only
LARGE DIAMETER OF BRUSH
CLEANS GROOVES
WATER
FLUSH
TUBE
SHAFT
CASING
SHAFT CORE
TUBE CLEANERS
IRAM
Wet or Dry Smooth Bore
Tubes/Pipes/Hoses
RAM-4X
Wet or Dry Smooth Bore
Tubes/Pipes/Hoses
RAM-4X2A & RAM-4X
Wet or Dry Smooth Bore
Tubes/Pipes/Hoses
AWT-100
Wet or Dry Smooth Bore
Tubes/Pipes/Hoses
6,4 to 25,4 mm I.D.
25,4 mm I.D. and up
25,4 mm” I.D. and up
6,35 mm I.D. and up
6,35 mm I.D. and up
Motor Power:
0.4 kW
.735 kW
1.47 kW
1.1 kW
Up to 2.9 kW
Input Power:
Standard: 4,5 amps,
230 V, 60 Hz AC
Standard: 13 amps,
115 V, 60 Hz AC
Standard: 11.5 amps, 230 V,
60 Hz AC
Optional: 4,5 amps,
230 V, 50 Hz;
Optional: 13 amps,
115 V, 50 Hz;
Optional: 11.5 amps,
230 V, 50 Hz;
Tube Size
Range:
AWT-100X
Wet or Dry Smooth Bore
Tubes/Pipes/Hoses
•
•
•
•
6.5 amps, 230 V,
60 Hz; or
6.5 amps, 230 V,
50 Hz
Power
Supply Cord:
6,5 m, 14-3 GFCI
•
Air
Requirements:
6,4 m, 14-3 GFCI
6,4 m, 14-3 GFCI
•
•
Minimum 60 PSI at 15 CFM,
Maximum 100 PSI at 70 CFM
Minimum 60 PSI at 85 CFM,
Maximum 100 PSI at 130 CFM
Shaft Speed:
Standard: 860 rpm
Standard: 1,725 rpm
Optional: 862.5 rpm
Standard: 1,725 rpm
Optional: 862.5 rpm
Adjustable, 500-3,000 rpm
Adjustable,
500-3000 rpm
Shaft Length:
Standard 22,9 m
Standard up to 22,9 m
Standard up to 22,9 m
Standard up to 22,9 m
Standard up to 22,9 m
HandCarried
Reversible shaft rotation
Water flush
Air powered
Air powered
Water flush
Water flush
Optional dry vacuum attachment
Variable speed
Variable speed
Quick connect shaft manifold
Quick connect shaft manifold
Water flush
Water flush
Quick connect shaft manifold
Quick connect shaft manifold
Optional dry vacuum attachment
Optional dry vacuum attachment
Special
Features:
Optional dry vacuum attachment
Optional for RAM-4:
834R Two-Direction Foot Switch for cleaning internally enhanced tubes
Optional for RAM-5SF:
834R-SF Two-Direction Foot Switch for cleaning internally enhanced tubes
SFG-702 Speed-Feed Gears for GTC-702 Shaft
SFG-703 Speed-Feed Gears for GTC-703 Shaft
SFG-704 Speed-Feed Gears for GTC-704 Shaft
Optional for RAM-6:
R6-CLEANER
Tube Cleaning Solution, 3,8 liter bottle
13
Flexible Shafts
PATENTED
GTC-701/GTC-702/GTC-703/GTC-704/GTC-720
WET / DRY APPLICATIONS
Flexible Shafts (Nylon Casing) for Tubes 6,4 to 9,5 mm I.D.
GTC-701-12 Flexible Shaft, 3,7 m
GTC-701-25 Flexible Shaft, 7,6 m
GALVANIZED
SPRING STEEL
SHAFT STOP
INTERNALLY
LUBRICATED
SHAFT
QUICK CONNECT
TOOL COUPLING
QUICK CONNECT
SHAFT COUPLING
THREADED
TOOL COUPLING
FEATURES
> Abrasion Resistant Blue Nylon Casing provides high visibility for safety
and a toughest exterior to withstand harsh industrial environments
> Internally Lubricated Shaft Insert molded out of a self lubricating material
reduces friction and increases shaft life
> Metal Nut provides a secure connection to the drive unit without any
concern for breakage
> Strain Relief System custom molded with a variable thickness allows
for a gradual radial bend that is far superior to a spring or coiled wire
> Shaft Stop which can be positioned anywhere along the shaft lets you
know when the end of the tube has been reached
> Quick Connect Couplings allow you to change shafs, brushes and cleaning
tools up to 30 times faster than on shafts with threaded connections
> Galvanized Spring Steel comprised of multiple counter rotated windings
provides unmatched performance and long durability
Flexible Shaft Dimensions
Shaft No. Casing O.D.
Tool End Thread
Shaft No. Casing O.D.
Tool End Thread
701
6,4 mm
8-32 female
720
19,1 mm
1⁄2-12 female
702
9,5 mm
1⁄4-28 female
721
22,2 mm
1⁄2-12 female
703
12,7 mm
1⁄4-28 female
721G
22,2 mm
1⁄2-12 female
704
14,3 mm
1⁄4-28 female
821
22,2 mm
1⁄2-12 female
Quick Connect Fittings
Patented
Note: Look for
this symbol for
Quick Connect Shaft
and Brush Fittings.
14
Flexible Shafts (Nylon Casing) for Tubes 11,1 to 12,7 mm I.D.
GTC-702Q-12 Flexible Shaft, 3,7 m
GTC-702Q-17 Flexible Shaft, 5,2 m
GTC-702Q-25 Flexible Shaft, 7,6 m
GTC-702Q-35 Flexible Shaft, 10,7 m
GTC-702Q-45 Flexible Shaft, 13,7 m
Flexible Shafts (Nylon Casing) for Tubes 14.3 to 25.4 mm I.D.
GTC-703Q-12 Flexible Shaft, 3,7 m
GTC-703Q-17 Flexible Shaft, 5,2 m
GTC-703Q-25 Flexible Shaft, 7,6 m
GTC-703Q-35 Flexible Shaft, 10,7 m
GTC-703Q-45 Flexible Shaft, 13,7 m
GTC-703Q-60 Flexible Shaft, 18,3 m
GTC-703Q-75 Flexible Shaft, 22,9 m
Flexible Shafts (Nylon Casing) for Tubes 17,5 to 25,4 mm I.D.
GTC-704Q-12 Flexible Shaft, 3,7 m
GTC-704Q-17 Flexible Shaft, 5,2 m
GTC-704Q-25 Flexible Shaft, 7,6 m
GTC-704Q-35 Flexible Shaft, 10,7 m
GTC-704Q-45 Flexible Shaft, 13,7 m
GTC-704Q-60 Flexible Shaft, 18,3 m
GTC-704Q-75 Flexible Shaft, 22,9 m
Note: GTC-702Q, GTC-703Q and GTC-704Q Flexible Shafts are available with standard
threaded tool couplings. To order leave off the “Q” in the part number.
Note: GTC-703, GTC-703Q, GTC-704 and GTC-704Q Flexible Shafts for use with a RAM-5SF
Speed-Feed Tube Cleaner require a special shaft stop. To order, add the suffix R5 to the part
number.
Flexible Shafts (Nylon Casing) for Tubes 25,4 mm I.D. and Up
GTC-720-15 Flexible Shaft, 4,6 m
GTC-720-25 Flexible Shaft, 7,6 m
GTC-720-35 Flexible Shaft, 10,7 m
GTC-720-50 Flexible Shaft, 15,2 m
DRY APPLICATIONS
Flexible Shafts (Covered Steel Casing) for Tubes 25,4 mm I.D. and Up
GTC-721-15 Flexible Shaft, 4,6 m
GTC-721-25 Flexible Shaft, 7,6 m
GTC-721-35 Flexible Shaft, 10,7 m
GTC-721-50 Flexible Shaft, 15,2 m
Flexible Shafts (Heat Resistant 149°C Rigid Covered Steel Casing)
for Tubes 25,4 mm I.D. and Up
GTC-721G-15 Flexible Shaft, 4,6 m
GTC-721G-25 Flexible Shaft, 7,6 m
GTC-721G-35 Flexible Shaft, 10,7 m
GTC-721G-50 Flexible Shaft, 15,2 m
Flexible Shafts (High Temperature Tolerant 232°C
Stainless Steel Casing) for Tubes 25,4 mm I.D. and Up
GTC-821-15 Flexible Shaft, 4,6 m
GTC-821-25 Flexible Shaft, 7,6 m
GTC-821-35 Flexible Shaft, 10,7 m
GTC-821-50 Flexible Shaft, 15,2 m
Shaft Cutting and Crimping Press
The Shaft Cutting and Crimping Press is specifically designed for use with Goodway
GTC-701, GTC-702 and GTC-703 Flexible Shafts. This unique tool will allow the user to quickly
cut and repair flexible shafts in the field without the use of any other tools.
PCC-BASE Shaft Cutting and Crimping Press with cutting dies
FLEXIBLE SHAFTS
CRIMPING TOOLS FOR FLEXIBLE SHAFT REPAIR
SHAFT CUTTING AND
CRIMPING PRESS
Note: Crimping dies not included.
Crimping Dies
DIE-SET-701/702/703 Dies for GTC-701/702/703 Flexible Shafts (specify shaft)
Crimping Block
Goodway’s Crimping Block provides the user with quick, convenient methods for performing repairs of
flexible shafts in the field. Used properly, each will permanently attach repair couplings, extending the life
of the flexible shaft while reducing downtime when a repair is needed.
GTC-CT5 Crimping Block with punch
GTC-CTP Replacement Punch
CRIMPING
BLOCK
FLEXIBLE SHAFT REPAIR COUPLINGS AND KITS
Flexible shaft repair kits include four drive end repair couplings, four thrust washers, four tool
end repair couplings, four O-rings, one crimping tool with punch, one flexible shaft lubricator with
quick disconnect, and two 0,5 liter bottles of lubricant for flexible shaft lubricator.
Standard Thread Tool End
Repair Couplings
717-1/2/3/6 Coupling for GTC-701/702/
703/704 Flexible Shafts (specify shaft)
717-4 Coupling for GTC-720/721/721G/821
Flexible Shafts
Quick Connect Tool End
Repair Couplings
717-2Q/3Q/6Q Coupling for GTC-702Q/
703Q/704Q Flexible Shafts with quick
connect fittings (specify shaft)
Flexible Shaft Drive End
Repair Couplings
713-1/2/3/5 Coupling for GTC-701/702/
703/704 Flexible Shafts (specify shaft)
713-6 Coupling for GTC-720/721/
721G/821 Flexible Shafts
Flexible Shaft Repair Kits
REP-701/702/703/704-KIT Repair Kit
for GTC-701/702/703/704 Flexible Shafts
(specify shaft)
REP-702Q/703Q/704Q-KIT Repair Kit
for GTC-702Q/703Q/704Q Flexible Shafts
(specify shaft)
REP-720-KIT Repair Kit for GTC-720
Flexible Shafts
THREADED TOOL END
REPAIR COUPLING
FLEXIBLE SHAFT
REPAIR KIT
QUICK CONNECT TOOL END
REPAIR COUPLING
DRIVE END REPAIR COUPLING
FLEXIBLE SHAFT LUBRICATOR
The Goodway Flexible Shaft Lubricator allows for fast, easy protection of flexible shafts in
between uses. Simply fill the lubricator with water-soluble lubricant, connect the flexible shaft
and attach a compressed air line [maximum 10,3 BAR – quick connect fits Goodway air line
#ASH-B50-A – see page 18]. The flow of air and lubricant displaces water and coats the
shaft core to protect it from harmful rust and corrosion. Lubricant flushes out with water when
shaft is used again.
GSL-705 Flexible Shaft Lubricator with quick connect
GSL-LU1 Lubricant for flexible shaft lubricator, 0,5 liter bottle
FLEXIBLE
SHAFT
LUBRICATOR
LUBRICANT
15
Tube Cleaner Accessories
CHILLER BIB®
The Goodway Chiller Bib captures dirty water and debris during tube cleaning operations, saving time and money on post-job cleanup. The unit consists
of a 610 mm wide x 300 mm deep reusable aluminum frame and a disposable poly bag. It features two oversized soft nylon brushes, which slide into the
chiller’s tubes, to securely fasten the Chiller Bib to the tube sheet. These brushes also slide in channels on the frame, allowing it to move across the tube
sheet for optimum positioning. A double edge combination of an EPDM gasket with a strip of underlying nylon bristles provides for a snug fit against an
irregular tube sheet. The poly bag is equipped with a 7,6 m integrated hose to funnel the water and debris to the nearest drain.
9401-3 Chiller Bib Bag (package of three)
BIB-KIT-3 Chiller Bib Frame with three Chiller Bib Bags
BAG-KIT-10 Chiller Bib Bag (package of ten)
1
2
3
PATENTED
DRY PICKUP ATTACHMENT
The GTC-DPA can be used with the RAM-4X, RAM-4X2A, AWT-100 and AWT-100X
Tube Cleaners for the recovery of dry deposits. After connecting the vacuum the
operator simply inserts a special dry application flexible shaft (GTC-721, GTC-721G or
GTC-821) through the Dry Pickup Attachment and into the tube. While the operator feeds the
rotating shaft through the tube, the cleaning tool breaks up deposits which are immediately
pulled into the vacuum drum.
CLEANING TOOL
CHILLER BIB BAG
WITH FRAME
FLEXIBLE SHAFT
BFN-152 STRAIGHT
BAYONET NOZZLE
GTC-DPA DRY PICKUP
ATTACHMENT
Note: To order flexible shafts, cleaning tools and vacuum, see pages 29, 32-33.
GTC-DPA Dry Pickup Attachment, including 51 mm x 3,7 m hose with quick connect fitting (order nozzle below)
BFN-152S Straight Bayonet Nozzle, 460 mm long for tubes 35, 41, 51, 64, 76 or 89 mm O.D.
BFN-152SA Straight Bayonet Nozzle, 460 mm long for tubes 102 mm O.D.
HOSE TO VACUUM
TUBE SHEET REFACING KIT
The Goodway Tube Sheet Re-Facing Kit contains all the materials you need to recondition up to 3,7 sq m of tube sheet. After thoroughly cleaning the surface
of the tube sheet, simply mix the two part epoxy and apply to the tube sheet with a roller or brush. Once mixed, you will have approximately 45 minutes
to apply the epoxy to the tube sheet. The epoxy is a 100% solids coating and will provide superior protection to the tube sheet.
TSRK Tube Sheet Re-Facing Kit including 2 liters of base epoxy and 1 liter of hardener to recondition up to a 3,7 sq m area, mixing bucket
with stick, scraper, steel brush, cup brush (for use with a drill – not included), two mini rollers with frame, 75 mm bristled brush, detail brush,
coverall suit, nitrile gloves and a plastic tarp all in a 19 liter bucket
16
Got a leaky tube? Plug it with the original solution that always works, a one piece tapered
brass tube plug. When installed properly tapered brass tube plugs can stay in place for years.
Precision engineered, Goodway Brass Tube Plugs are ideal for a wide range of tube applications,
and should be driven into the tube with a hammer just far enough to form a seal. They are
manufactured in sizes to cover chiller and heat exchanger tubes 15,9 mm, 19,1 mm, 22,2 mm
or 25,4 mm O.D. with BWG ranges 15 to 22.
TP-062S Brass Tube Plug for tubes 15,9 mm O.D. with BWG ranges 15 to 22
TP-075S Brass Tube Plug for tubes 19,1 mm O.D. with BWG ranges 15 to 22
TP-087S Brass Tube Plug for tubes 22,2 mm O.D. with BWG ranges 15 to 22
TP-100S Brass Tube Plug for tubes 25,4 mm O.D. with BWG ranges 15 to 22
ADJUSTABLE SILICONE TUBE PLUGS
Designed to conform to almost any inside tube surface, including coated tubes, and designed to not
damage tube walls, these adjustable tube plugs provide a versatile option when it becomes
necessary to plug tubes. Brass or stainless steel nuts and bolts, vulcanized silicone rubber and high
performance plastic make materials compatibility a non issue. Available in single seal configurations
for lower pressure applications (less than 4,1 BAR) or double seal configuration for higher pressure
applications (up to 10 BAR), these plugs are designed for long life at high temperatures, in fresh or
salt water.Installation and removal is easy. Pre-set torque wrenches make proper instillation
fool-proof.They are manufactured in sizes to cover chiller and heat exchanger tubes 15,9 mm,
19,1 mm, 22,2 mm, 25,4 mm, 29 mm or 32 mm O.D. with BWG ranges 18 to 25.
TP-ADJ-B Adjustable Silicone Tube Plug with brass nuts and bolt
TP-ADJ-S Adjustable Silicone Tube Plug with stainless steel nuts and bolt
TP-ADJ-TW-SM T-Handle Torque Wrench for 15,9 mm to 19,1 mm O.D. plugs, preset to 17 in. lbs.
TP-ADJ-TW-LG T-Handle Torque Wrench for 22,2 mm to 32 mm O.D plugs, preset to 33 in. lbs.
TUBE CLEANER ACCESSORIES
BRASS TUBE PLUGS
Note: Additional style and size Tube Plugs available.
TUBEGUARD® TUBE FILTERS
Asian clams, Zebra mussels, pipe scale, sticks, rocks, leaves, water line slag and other debris
can restrict water flow and reduce heat exchanger efficiency. Goodway TubeGuard tube filters
help maintain heat exchanger efficiency by preventing much of these materials from entering
the tubes. These durable polypropylene filters feature several large openings, designed to help
prevent macro fouling by capturing only the debris that would clog the tubes, allowing the
smaller debris to harmlessly pass through the tubes. They have a short profile which provides
for less buildup of debris on the tube sheet and easier cleaning.
FEATURES
> Polypropylene construction
> Large openings to keep out larger,
tube clogging debris and to allow
the passage of water
> Short profile for less debris buildup on
the tube sheet providing for easier cleaning
Call for prices and quantity discounts
Tube Guards
Part
Number
TG-087-18
TG-087-20
TG-100-18
TG-100-20
TG-112-18
TG-112-20
TG-112-22
Tube
O.D.
22,2 mm
22,2 mm
25,4 mm
25,4 mm
28,6 mm
28,6 mm
28,6 mm
Gage
18
20
18
20
18
20
22
Tube
I.D.
19,7 mm
20,4 mm
22,9 mm
23,6 mm
26,1 mm
26,8 mm
27,2 mm
FLEXIBLE FIBERGLASS ROD
Each Flexible Fiberglass Rod is equipped with a brass tip and is ideal for removing foreign
material stuck inside tubes. Custom lengths are available.
QS-ROD-45 Flexible Fiberglass Rod, 13,7 m
QS-ROD-65 Flexible Fiberglass Rod, 19,8 m
Note: Custom lengths available.
17
Tube Cleaner Accessories Continued
OIL FEED
SIGHT GLASS
OIL FEED
ADJUSTMENT KNOB
AIR
PRESSURE
GAUGE
5µm
REPLACEABLE
FILTER
PUSH BUTTON DRAINS
QUICK
RELEASE
FOR BOWLS
AIR LUBRICATOR, FILTER AND REGULATOR
Air-operated equipment will last longer and run more efficiently with proper treatment
of the air supply.
Note: All modules have 1⁄2" npt ports. Maximum pressure 10,3 BAR. Maximum temperature 60°C.
Air displacement 238 m3/h.
GTC-705-4 Combination Air Lubricator, Filter and Regulator
15 ml
CAPACITY
AIR SUPPLY HOSES
Made from 13 mm I.D. x 15,2 m abrasion resistant black rubber, Goodway Air Supply
Hoses provide high CFM airflow to pneumatic machinery for maximum power. They
can be used for a variety of industrial applications.
AIR SUPPLY
HOSE
Note: Maximum pressure 13,8 BAR.
ASH-B50-A Air Supply Hose for AWT-100 and GSL-705
ASH-B50-G Air Supply Hose for AWT-100X, JCL JetLaunch®,
JL JetLoad®, LD-2X2 and QS-300 Quick Shot
ASH-B50-P Air Supply Extension Hose for PSM-500
ASH-B50-E Air Supply Extension Hose for all hoses listed above
WATER SUPPLY HOSE
Made from 16 mm I.D. x 15,2 m abrasion resistant red rubber, the Goodway Water
Supply Hose provides higher GPM waterflow than conventional 13 mm I.D. garden
hoses. High flow is important for adequate flushing of tubes and for providing
sufficient volume to all Goodway equipment. Use with water up to 28°C. Stays
flexible to -32°C. It is ideal for any application requiring a high flow, high quality
hose.
WATER SUPPLY
HOSE
Note: Maximum pressure 10,3 BAR.
WSH-R50 Red Rubber Water Supply Hose
CARRYING
BAG
CARRYING BAG
This heavy-duty 660 mm diameter carrying bag will fit all size flexible shafts as well
as some basic accessories.
SB-26 Carrying Bag
HEAVY-DUTY CONTRACTOR DOLLY
STORAGE
RACK
SHAFT
CLIP
ACCESSORY
BIN
STAIR
GLIDES
LARGE
PNEUMATIC
TIRES
18
The Goodway Heavy-Duty Contractor Dolly is designed for use with all RAM-4,
RAM-4X, RAM-5SF, RAM-6, AWT-100X and AQ-R1500 Machines. It features an
increased height, large pneumatic tires and bumpers for easier maneuverability and
stair climbing ability, a storage rack for flexible shafts and water hoses, and a large
storage bin with drainage for brushes and other accessories.
RAM-DOLLY-C Heavy-Duty Contractor Dolly
BRUSHES FOR INTERNALLY ENHANCED TUBES
LARGE DIAMETER OF BRUSH CLEANS GROOVES
SMALL DIAMETER OF BRUSH CLEANS LANDS
TURBO TIP
HELPS DISLODGE
DEPOSITS
BRUSHES AND TOOLS
Brushes and Tools 6,4 mm to 25,4 mm
ENN-062-Q The “Patriot” Dual Diameter
Nylon Brush for tubes 15,9 mm I.D.
ENN-090-Q The “Patriot” Dual Diameter
Nylon Brush for tubes 23,8 mm I.D.
The”Patriot®” Dual Diameter Nylon Brush:
The”Patriot” Dual Diameter Nylon Brush is recommended for removing soft deposits
(mud, algae, etc.) in straight, ferrous and nonferrous internally enhanced tubes. The
large diameter end of this brush cleans into the grooves while its small diameter end cleans the
lands of the tube’s rifling.
Available in Bags of 25
ESGB-Q-050 Dual Diameter Spin-Grit Brush
for tubes 12,7 mm I.D.
ESGB-Q-062 Dual Diameter Spin-Grit Brush
for tubes 15,9 mm I.D.
ESGB-Q-075 Dual Diameter Spin-Grit Brush
for tubes 19,1 mm I.D.
ESGB-Q-100 Dual Diameter Spin-Grit Brush
for tubes 25,4 mm I.D.
Dual Diameter Spin-Grit Brushes:
The Dual Diameter Spin-Grit Brushes is recommended for removing soft and light scale deposits
in straight, ferrous and nonferrous internally enhanced tubes. The small diameter end of this
brush cleans into the grooves while the large diameter end cleans the lands of the tube’s rifling.
Available in Bags of 15
BRUSHES FOR SMOOTH BORE TUBES
4,8 to 25,4 mm Only
GTC-211Q Blue Nylon Brushes, 6,4 to
25,4 mm (in 1,6 mm increments)
SGB-050 Spin-Grit Brush for tubes
6,4 to 9,5 mm I.D.
SGB-Q-075 Spin-Grit Brush for tubes
11,1 to 15,9 mm I.D.
SGB-Q-100 Spin-Grit Brush for tubes
17,5 to 19,1 mm I.D.
SGB-Q-125 Spin-Grit Brush for tubes
20,6 to 25,4 mm I.D.
Blue Nylon Brushes:
Blue Nylon Brushes are recommended for removing soft deposits (mud, algae, etc.) in straight,
ferrous and nonferrous tubes. Brush should be equal to or 1,6 mm smaller than tube I.D.
Available in Bags of 15 or 25 – Depending on Size
4,8 to 25,4 mm Only
Spin-Grit Brushes:
Spin-Grit Brushes are recommended for removing soft and light scale deposits in straight, ferrous
and nonferrous internally enhanced tubes.
Available in Bags of 15
ENB-5/8 Bi-fill Brush, 15,9 mm
Note: 6,4 mm and 7,9 mm threaded brushes require a #C-1
Coupling, and 9,5 mm threaded brushes require a #C-2 Coupling
to connect to GTC-701 Flexible Shafts. (Couplings supplied with
GTC-701 Flexible Shaft order.)
Note: All Goodway brushes and buffing tools are available with
standard threaded tool couplings. To order leave off the “Q” in the
part number.
15,9 mm Only
Bi-Fill Brushes:
Bi-Fill Brushes are recommended for removing soft and light scale deposits in straight, ferrous
and nonferrous tubes. The dual nylon and brass filaments help extend the life of the brush. Brush
should be equal to or 1,6 mm smaller than tube I.D.
Available in Bags of 25
19
Brushes and Tools 6,4 mm to 25,4 mm Continued
BRUSHES FOR SMOOTH BORE TUBES CONTINUED
4,8 to 25,4 mm Only
Brass Brushes:
Brass Brushes are recommended for removing soft and light scale deposits in straight, ferrous and
nonferrous tubes. Brush should be equal to or 1,6 mm smaller than tube I.D.
GTC-200BQ Brass Brushes,
Available in Bags of 15
6,4 to 25,4 mm (in 1,6 mm increments)
4,8 to 25,4 mm Only
Stainless Steel Brushes:
Stainless Steel Brushes are recommended for removing soft and light scale deposits
in straight, ferrous tubes. Brush should be equal to or 1,6 mm smaller than tube I.D.
GTC-210Q Stainless Steel Brushes,
Available in Bags of 15
6,4 to 25,4 mm (in 1,6 mm increments)
BUFFING TOOLS
9,5 to 25,4 mm Only
Stainless Steel Wire Buffing Tools are used for removing light to medium scale deposits or for
finishing tubes previously “roughed out” with other cleaning tools. They can be used in straight,
ferrous and nonferrous tubes. Buffing tools can only be used in a clockwise (forward) direction
and cannot be used in internally enhanced tubes. They are adjustable to a 6,4 mm range.
GTC-203 Buffing Tool for tubes 7,9 to 9,5 mm I.D. GTC-203DT Same as GTC-203 with drill tip
GTC-204Q Buffing Tool for tubes 9,5 to 12,7 mm I.D. GTC-204QDT Same as GTC-204Q with drill tip
Accessory
Application
Adjustable Triangular Scraping Tools Removing heavy scale deposits in straight, ferrous tubes. They
can only be used in a clockwise (forward) direction and cannot
be used in internally enhanced tubes. They are adjustable to a
6,4 mm range.
Part No.
TST-500
TST-750
Sizes
Triangular Scraper Tool for tubes 12,7 to 19,1 mm I.D.
Triangular Scraper Tool for tubes 19,1 to 25,4 mm I.D.
Carbide Drills
Carbide Drills are recommended for cleaning straight, ferrous tubes
plugged solidly with deposit.
PTB-025/037/043/050/
056/062/068
6,4 mm, 9,5 mm, 11,1 mm, 12,7 mm,
14,3 mm, 15,9 mm or 17,5 mm (specify size)
Flex-Hone Abrasive Tools
Flex-Hone Abrasive Tools are light pressure, soft application
honing devices for cleaning straight, ferrous tubes. They consist of
180 grit silicon carbide abrasive globules (stones) bonded to high
density nylon filaments. Order tool to correspond to tube I.D.
FHT-025/031/037/043/
050/056/062/068/075/
087/100
6,4 mm, 7,9 mm, 9,5 mm, 11,1 mm, 12,7 mm, 14,3 mm, 15,9
mm, 17,5 mm, 19,1 mm, 22,2 mm or 25,4 mm (specify size)
Flex Hub Tools
Flex Hub Tools incorporate centrifugally activated blades for
removing hard and heavy deposits in straight, ferrous tubes.
GTC-225
GTC-225A
U-Tube Tools
Consisting of brushes or grinding tips permanently mounted on
460mm sections of flexible shafts, U-Tube Tools are designed to
snake partially through each side of a U-bend, to thoroughly clean
from both sides.
CBT-075B
CBT-075S
WBT-075B/100B
WBT-075S/100S
GTT-050
GTT-625
Note: 6,4 mm and 7,9 mm threaded brushes require a #C-1 Coupling, and 9,5 mm threaded brushes require a #C-2 Coupling to
connect to GTC-701 Flexible Shafts. (Couplings supplied with GTC-701 Flexible Shaft order.)
20
GTC-205Q Buffing Tool for tubes 12,7 to
14,3 mm I.D.
GTC-205QDT Same as GTC-205Q with drill tip
GTC-206Q Buffing Tool for tubes 15,9 to
25,4 mm I.D.
GTC-206QDT Same as GTC-206Q with drill tip
GTC-207 Replacement Metal Blades
for GTC-203 and GTC-204
GTC-208A Replacement Metal Blades
for GTC-205
GTC-208B Replacement Metal Blades
for GTC-206
Note: Flex-Hone Abrasive Tools are normally used with a water
flush for maximum life.
Flex Hub for straight tubes 12,7 to 25,4 mm I.D.
Replacement Metal Blades for GTC-225 (set of three)
Brass Cup Brush Tool for tubes 12,7 to 19,1 mm I.D.
Stainless Steel Cup Brush Tool for tubes 12,7 to 19,1 mm I.D.
Brass Wheel Brush, 19,1 mm or 25,4 mm (specify size)
Stainless Steel Wheel Brush, 19,1 mm or 25,4 mm (specify size)
Grinding Tip Tool, 12,7 mm
Grinding Tip Tool, 15,9 mm
Note: All Goodway brushes and buffing tools are available with
standard threaded tool couplings. To order leave off the “Q” in
the part number.
Accessory
Application
Part No.
Sizes
Nylon Brushes
Removing soft deposits (mud, algae, etc.) in straight, ferrous and
nonferrous tubes. Order brush to correspond to tube I.D.
TCB-N
32 mm, 38 mm, 44 mm, 51 mm, 57 mm, 64 mm, 70 mm,
76 mm, 83 mm, 89 mm, 95 mm or 102 mm
Brass Brushes
Removing soft and light scale deposits in straight, ferrous and
nonferrous tubes. Order brush to correspond to tube I.D.
TCB-B
32 mm, 38 mm, 44 mm, 51 mm, 57 mm, 64 mm, 70 mm,
76 mm, 83 mm, 89 mm, 95 mm or 102 mm
Stainless Steel Brushes
Removing soft and light scale deposits in straight, ferrous tubes.
Order brush to correspond to tube I.D.
TCB-S
32 mm, 38 mm, 44 mm, 51 mm, 57 mm, 64 mm, 70 mm,
76 mm, 83 mm, 89 mm, 95 mm, 102 mm, 108 mm,
114 mm, 121 mm or 127 mm
Dual Diameter Spin Grit Brushes
Removing soft and light scale deposits in straight, ferrous and
nonferrous internally enhanced tubes. The small diameter end of
this brush cleans into the grooves while the large diameter end
cleans the lands of the tube’s rifling. Order brush to correspond
to tube I.D.
ESGB-Q-100
ESGB-Q-125
Carbon Steel
Brushes
Removing soft and light scale deposits in straight, ferrous tubes.
Order brush to correspond to tube I.D. (Not recommended for
stainless steel tubes.)
TCB-C
127 mm, 152 mm, 178 mm, 203 mm, 229 mm, 254 mm,
279 mm, 305 mm, 330 mm or 356 mm
Plastic
Brushes
Removing soft deposits in straight, ferrous and nonferrous tubes.
Order brush to correspond to tube I.D.
TCB-P
102 mm, 127 mm, 152 mm, 178 mm, 203 mm, 229 mm,
254 mm, 279 mm, 305 mm, 330 mm or 356 mm
Removing light to medium scale deposits or for finishing tubes
previously “roughed out” with other cleaning tools. They can be
used in straight, ferrous and nonferrous tubes.
GTC-223
GTC-203DT
GTC-224
Adjustable Buffing Tool
25,4 mm
32 mm
Buffing Tool for tubes 25,4 to 76 mm I.D.
Same as GTC-223 with drill tip
Replacement Metal Blades for GTC-223
Adjustable Triangular Scraping Tools Removing heavy scale deposits in straight, ferrous tubes.
TST-1000
TST-1500
TST-2000
TST-2500
Triangular Scraper Tool for tubes 25,4 to 38 mm I.D.
Triangular Scraper Tool for tubes 38 to 51 mm I.D.
Triangular Scraper Tool for tubes 51 to 64 mm I.D.
Triangular Scraper Tool for tubes 64 to 76 mm I.D.
Carbide
Drills
GTC-231D
GTC-229
PTB-100
19,1 mm
22,2 mm
25,4 mm
Carbide Drills are recommended for cleaning straight, ferrous tubes
plugged solidly with deposit.
WHEEL BRUSH ASSEMBLIES
To order Wheel Brush Assemblies refer to the table (right) listing the type of tubes to be cleaned – straight or curved.
Straight Tube Wheel Brush Assemblies
Recommended for removing soft and light scale deposits in straight, ferrous tubes. Each assembly consists of four stainless
steel wire wheel brushes attached to a universal joint. Brushes should be 3,2 to 6,4 mm smaller than tube I.D.
Curved Tube Wheel Brush Assemblies
Recommended for removing soft and light scale deposits in curved, ferrous tubes. Each assembly consists of a single
stainless steel wire wheel brush attached to each end of a universal joint. Brushes should be 6,4 to 9,5 mm smaller than
tube I.D.
* Note: GTC-706 Coupling required to connect to GTC-720, GTC-721, GTC-721G and GTC-821 Flexible Shafts.
Straight Tube Wheel Brush Assemblies
Straight
Tube I.D.
29 to 32 mm
35 to 38 mm
41 to 44 mm
48 to 51 mm
54 to 57 mm
60 to 64 mm
67 to 70 mm
73 to 76 mm
79 to 83 mm
Wheel Brush
Assembly
WBS-100
WBS-125
WBS-150
WBS-175
WBS-200
WBS-225
WBS-250
WBS-275
WBS-300
Actual
Brush O.D.
25,4 mm
32 mm
38 mm
44 mm
51 mm
57 mm
64 mm
70 mm
76 mm
Replacement
Brushes
WBR-100
WBR-125
WBR-150
WBR-175
WBR-200
WBR-225
WBR-250
WBR-275
WBR-300
BRUSHES AND TOOLS
Brushes and Tools 25,4 mm and Up
STRAIGHT TUBE
WHEEL BRUSH
ASSEMBLY
CURVED TUBE
WHEEL BRUSH
ASSEMBLY
Curved Tube Wheel Brush Assemblies
Curved
Tube I.D.
32 to 35 mm
38 to 41 mm
44 to 48 mm
51 to 54 mm
57 to 60 mm
64 to 67 mm
70 to 73 mm
76 to 79 mm
83 to 89 mm
Wheel Brush
Assembly
WBC-100*
WBC-125*
WBC-150*
WBC-175
WBC-200
WBC-225
WBC-250
WBC-275
WBC-300
Actual
Brush O.D.
25,4 mm
32 mm
38 mm
44 mm
51 mm
57 mm
64 mm
70 mm
76 mm
Replacement
Brushes
WBR-100
WBR-125
WBR-150
WBR-175
WBR-200
WBR-225
WBR-250
WBR-275
WBR-300
21
Brushes and Tools 25,4 mm and Up Continued
CONE CUTTER ASSEMBLIES
SINGLE CONE ASSEMBLY
Cone Cutter Assemblies are designed for removing scale deposits from straight and curved, ferrous tubes. Assemblies
should be slightly smaller than tube I.D. The innovative design of the cones ensures a thorough cleaning. In watertube
boilers, cone cutters are the most effective cleaning tools for all conditions.
Single and Double Cone Assemblies
Assemblies consisting of one or two cone elements are used for cleaning straight tubes 29 to 59 mm I.D. and curved tubes
32 to 60 mm I.D.
Disc Cone Assemblies
Assemblies consisting of three cone elements are used for cleaning straight tubes 60 to 95 mm I.D. and curved tubes
64 to 102 mm I.D.
DOUBLE CONE
ASSEMBLY
DISC CONE
ASSEMBLY
Single and Double Cone Assemblies
Straight
Tube I.D.
Curved
Tube I.D.
29 to 32 mm
33 to 35 mm
37 to 38 mm
40 to 44 mm
46 to 51 mm
52 to 59 mm
32 to 35 mm
38 to 41 mm
44 to 48 mm
51 to 54 mm
57 to 60 mm
•
Single
Cone
Assembly
SCA-100
SCA-112
SCA-125
SCA-150
SCA-175
SCA-200
Double Replacement
Cone
Cones
Assembly
DCA-100 RCO-100
DCA-112 RCO-112
DCA-125 RCO-125
DCA-150 RCO-150
DCA-175 RCO-175
DCA-200 RCO-200
Disc Cone Assemblies
Straight
Tube I.D.
60 to 71 mm
73 to 84 mm
86 to 95 mm
Accessory
Application
Part No.
Drill Cone Assemblies
Cleaning straight, ferrous tubes plugged solidly with deposits. Order
assembly to correspond to tube I.D.
DDC-100
DDC-112
DDC-125
DDC-150
DDC-175
Flex-Hone Abrasive Tools are light pressure, soft application
honing devices for cleaning straight, ferrous tubes. They consist of
180 grit silicon carbide abrasive globules (stones) bonded to high
density nylon filaments. Order tool to correspond to tube I.D.
FHT-125/150/175/200
225/250/275/300
Flex Hub Tools incorporate centrifugally activated blades for
removing hard and heavy deposits in straight or curved, ferrous
tubes. A drill can be attached to the front of the GTC-227 or
GTC-231 Flex Hub to clean severely clogged tubes.
GTC-226
Flex-Hone
Abrasive Tools
Flex Hub Tools
Curved
Tube I.D.
51 to 78 mm
79 to 92 mm
94 to 102 mm
Disc Cone Replacement
Assembly
Cones
CDC-101
RCO-100
CDC-102
RCO-100
CDC-103
RCO-112
Sizes
25,4 mm
29 mm
32 to 35 mm
38 to 41 mm
44 to 48 mm
32 mm, 38 mm, 44 mm, 51 mm, 57 mm, 64 mm,
70 mm or 76 mm (specify size)
Note: Flex-Hone Abrasive Tools are normally used with a water
flush for maximum life.
GTC-231
GTC-227
GTC-226A
GTC-231A
GTC-227A
GTC-229
GTC-231D
CUJ-002
Flex Hub for straight tubes 22,2 to 38 mm I.D.
or curved tubes 25,4 to 44 mm I.D.
Flex Hub for straight tubes 38 to 51 mm I.D.
or curved tubes 44 to 64 mm I.D.
Flex Hub for straight tubes 44 to 102 mm I.D.
or curved tubes 64 to 102 mm I.D.
Replacement Metal Blades for GTC-226 (set of three)
Replacement Metal Blades for GTC-231 (set of three)
Replacement Metal Blades for GTC-227 (set of three)
Drill to be attached to GTC-227 Flex Hub
Drill to be attached to GTC-231 Flex Hub
Universal Joint for use with Flex Hubs when minimum tube
bend radius is less than 5 x I.D. of the tube (consult factory)
Rigid Arm Flare Cone Tool
Rigid Arm Flare Cone Tools incorporate centrifugally activated,
serrated cones for removing light to heavy scale deposits in
straight, ferrous tubes. Use in horizontal or vertical tubes.
FCT-300
FCT-301
RCO-100
CRB-001
Flare Cone Tool for tubes 44 to 102 mm I.D.
Flare Cone Tool for tubes 102 to 165 mm I.D.
Replacement Cone
Replacement Cone Retainer Bolt
Flexible Arm Flare Cone Tool
The Flexible Arm Flare Cone Tool incorporates centrifugally
activated serrated cones for removing light to heavy scale deposits
in straight or curved, ferrous tubes. Most effective results are
obtained if tube is in vertical position when cleaning.
FCT-600
RCO-100
CRB-001
Flare Cone Tool for tubes 102 to 305 mm I.D.
Replacement Cone
Replacement Cone Retainer Bolt
Flare Brushes
Flare Brushes incorporate centrifugally activated wire cables with
cobalt tips for light descaling and finishing of straight or curved,
ferrous and nonferrous tubes.
FBT-301
FBT-501
FBT-502
Three Strand Flare Brush for tubes 25,4 to 51 mm I.D.
Five Strand Flare Brush for tubes 51 to 102 mm I.D.
Five Strand Flare Brush for tubes 102 to 203 mm I.D.
Universal Nylon Rod (Flare) Tool
The Universal Nylon Rod (Flare) Tool incorporates centrifugally
activated nylon rods for removing light deposits in straight or
curved, ferrous and nonferrous tubes.
UFT-005-8
22
Universal Nylon Rod (Flare) Tool for tubes 51 to 381 mm I.D.
FEATURES
Hands Free
Scale Removal
System
Reverse Flow
Scale Removal
System
Reverse Flow
Scale Removal
System
Specifications
GDS-15-PH
GDS-C40
GDS-C92
Motor Power:
Input Power:
0,6 kW
11 Amps, 115 V, 50/60 Hz AC
Optional 5,5 Amps, 230 V, 50/60 Hz
6,4 m, 14-3
114 LPM
Noryl Centrifugal Main and
Positive Displacement Diaphragm Chemical
57 liters
Two 4,6 m Circulation Hoses
Hands Free Automatic Chemical Pump
Venting Drum for Closed Systems
Valves for Immersion Tank Re-circulating
pH probe with 0,5 liters storage solution
Five pH 7,01 Calibration Packets
Five pH 4,01 Calibration Packets
1.220 mm High x 660 mm Wide x
840 mm Deep
57 kg Net Dry
0,4 kW
7,6 Amps, 115 V, 50/60 Hz AC
Optional 3,8 Amps, 230 V, 50/60 Hz
5,5 m, 18-3
57 LPM
Centrifugal
•
38 liters
Two 3 m Circulation Hoses
Run Dry Ciculation Pump
Venting Cap for Closed Systems
Flow Reversal Valve
•
•
•
685 mm High x 380 mm Wide x
430 mm Deep
17 kg Net Dry
0,6 kW
8,6 Amps, 115 V, 50/60 Hz AC
Optional 4,3 Amps, 230 V, 50/60 Hz
5,5 m, 16-3
79 LPM
Centrifugal
•
57 liters
Two 3 m Circulation Hoses
Run Dry Ciculation Pump
Venting Cap for Closed Systems
Flow Reversal Valve
•
•
•
890 mm High x 380 mm Wide x
585 mm Deep
23 kg Net Dry
> Acid proof pump and fittings
> High flow pump re-circulates
quickly
> Portable design maximizes
flexibility
> Two circulation hoses
> Venting drum or cap for closed
systems
Power Supply Cord:
Output Water Flow:
Pump(s):
Tank Capacity:
Hoses:
Special Features:
Dimensions:
Weight:
CHEMICAL DESCALING SYSTEMS
Scale Removal Equipment
23
Scale Removal Chemicals
> DISSOLVES CALCIUM,
LIME , RUST AND
LITHIUM CARBONATE
ON CONTACT
> LOW FOAMING
> LESS CORROSIVE
> ECONOMICAL
> BIODEGRADABLE
SCALEBREAK®
Goodway’s ScaleBreak safely dissolves mineral
deposits faster then other liquid descalers on the
market. This biodegradable cleaner will quickly
dissolve calcium, lime, rust, lithium carbonate
and other types of deposits from water passages
in water cooled or heated equipment. It is safe
for use on steel, iron, brass, copper, plastic and
rubber. When used as directed, it will help to
improve the operating efficiency and extend the
life of your equipment. Fortified with powerful
low foaming, wetting and penetrating agents,
and superior corrosion inhibitors, it is ideal for
use on boilers, chillers, condensers, heat
exchangers, oil coolers, cooling towers, furnaces
and water piping systems.
SCALEBREAK-5 Descaling Solution,
19 liter bottle
SCALEBREAK-30 Descaling Solution,
114 liter drum
SCALEBREAK-55 Descaling Solution,
208 liter drum
SCALEBREAK-275 Descaling Solution,
1,041 liter tote
SCALEBREAK-330 Descaling Solution,
1,249 liter tote
SCALEBREAK-SS
Do you have a scaling problem with stainless
steel surfaces? Stainless steel calls for a special
kind of Scalebreak solution. ScaleBreak-SS
contains no HCL and therefore is safe for
prolonged exposure to stainless steel. Descaling
chemicals using even small amounts of
hydrochloric acid will destroy the passivity of
stainless steel and could over time lead to stress
cracks. Scalebreak-SS is your best and safest bet
for all stainless steel applications.
SCALEBRK-SS-5 Stainless Steel
Descaling Solution, 19 liter bottle
SCALEBRK-SS-30 Stainless Steel
Descaling Solution, 114 liter drum
SCALEBRK-SS-55 Stainless Steel
Descaling Solution, 208 liter drum
SCALEBRK-SS-275 Stainless Steel
Descaling Solution, 275 gallon tote
SCALEBRK-SS-330 Stainless Steel
Descaling Solution, 1,249 liter tote
>
>
Stainless steel heat exchanger before
using ScaleBreak-SS.
Stainless steel heat exchanger after
using ScaleBreak-SS.
SCALEBREAK-PT
Certified by NSF to NSF/ANSI Standard 60 for
potable water applications. This is a phosphoric
acid based de-scaler, similar to ScaleBreak-SS.
Great for marine equipment on all types of
vessels.
24
SCALEBRK-PT-5 Potable Applications
Descaling Solution, 19 liter bottle
SCALEBRK-PT-30 Potable Applications
Descaling Solution, 114 liter drum
SCALEBRK-PT-55 Potable Applications
Descaling Solution, 208 liter drum
SCALEBRK-PT-275 Potable Applications
Descaling Solution, 1,249 liter tote
HEAT EXCHANGER MAINTENANCE
Tube Cleaning Drill
FEATURES
> Compact, rugged construction
> Independent air motor and water flow controls
to reduce water consumption
> Push button trigger to reduce fatigue
Specifications
PSM-500
Drill Speed:
Motor Power:
950 rpm (Free Speed)
Up to 0,5 kW Depending on
Air Pressure and Volume
Air Requirements:
Minimum 3,4 BAR at 18 m3/h
Maximum 6,2 BAR at 32 m3/h
Water Requirements:
Minimum 2,1 BAR at 7,6 LPM,
Maximum 6,9 BAR7,6 LPM
Hoses:
4,6 m Air Hose and 4,6 m Water Hose
Dimensions:
290 mm Long
Weight:
2,5 kg
Optional Carrying Case:
360 mm High x 1.360 mm Wide x
120 mm Deep
PSM-500
WATER
AIR
Recommended:
For better air regulation and quality,
plus longer motor life, we recommend
the combination air lubricator, filter
and regulator unit (GTC-705-4).
GTC-705-4 Combination
Air Lubricator, Filter and
Regulator (see page 16)
Optional:
3012-500 Carrying Case,
with room for up to eight
1,2 m long hollow drills
GTC-705-4
CARRYING
CASE
See pages 26 for optional
equipment and accessories.
Call for assistance.
25
Tube Cleaning Drill Accessories
Accessory
Blue Nylon Brushes
Application
Part No.
Removing soft deposits in straight, ferrous and
nonferrous tubes. Brush should be equal to or
1,6 mm smaller than tube I.D.
GTC-211
6,4 to 25,4 mm (in 1,6 mm increments)
Brass Brushes
Removing soft and light scale deposits in straight,
ferrous and nonferrous tubes. Brush should be
equal to or 1,6 mm smaller than tube I.D.
GTC-200B
6,4 to 25,4 mm (in 1,6 mm increments)
Stainless Steel Brushes
Removing soft and light scale deposits in straight,
ferrous . Brush should be equal to or 1,6 mm
smaller than tube I.D.
GTC-210
6,4 to 25,4 mm (in 1,6 mm increments)
Adjustable Buffing Tool
Removing light to medium scale deposits or for
finishing tubes previously “roughed out” with
other cleaning tools. They can be used in straight,
ferrous and nonferrous tubes. Buffing tools can
only be used in a clockwise (forward) direction
and cannot be used in internally enhanced tubes.
They are adjustable to a 6,4 mm range.
GTC-203P
GTC-203PDT
GTC-205
GTC-205DT
GTC-206
GTC-206DT
GTC-207/208A/208B
Adjustable Triangular Scraping Tool Removing heavy scale deposits in straight,
ferrous tubes. They can only be used in a
clockwise (forward) direction and cannot be
used in internally enhanced tubes. They are
adjustable to a 6,4 mm range.
TST-500
TST-750
Buffing Tool for tubes 7,9 to 12,7 mm I.D.
Same as GTC-203PDT with drill tip
Buffing Tool for tubes 12,7 to 14,3 mm I.D.
Same as GTC-205DT with drill tip
Buffing Tool for tubes 15,9 to 25,4 mm I.D.
Same as GTC-206DT with drill tip
Replacement Blades for GTC-203P, GTC-205 and GTC-206
(specify Buffing Tool)
Triangular Scraper Tool for tubes 12,7 to 19,1 mm I.D.
Triangular Scraper Tool for tubes 19,1 to 25,4 mm I.D.
Starter Drills
Making pilot holes in deposits of completely
clogged tubes.
GTC-975A
GTC-975B
Starter Drill, 4,8 or 6,4 mm
Starter Drill, 9,5 mm and up
Hollow Drills
Cleaning severely or completely clogged tubes.
(Effective length 840 mm for 0,9 m drills and
1.140 mm for 1,2 m drills.)
GTC-960-3
GTC-961-3
Hollow Drill, 4,8 mm x 0,9 m
Hollow Drill, 6,4 mm x 0,9 m
Adapt brushes, buffing tools, hollow carbide drills
and twist drills to PSM-500.
GTC-964-3
Hollow Shafts
Note: Hollow drills are available in diameters from 3,2 to 19,1 mm up to 1,8 m long.
GTC-965-KIT
GTC-989-KIT
Hollow Drill Tips
Hollow Drill Tips attach to Hollow Shafts and
are used to clean severely or completely
clogged tubes.
Twist Drills
Twist Drills attach to Hollow Shafts and are
used to clean severely or completely
clogged tubes.
Hollow Shaft, 0,9 m long with coupling for 6,4 mm brushes
Note: GTC-964 Hollow Shaft is available up to 1,8 m long. To order,
change suffix on GTC-964 to length specifications (in feet) beyond 3' (0.9 m) standard
(e.g. GTC-964-6 is a 1,8 m Hollow Shaft.)
GTC-965-3
26
Sizes
GTC-998
GTC-RWB-031
GTC-RWB-037
GTC-RWB-042
GTC-RWB-050
GTC-RWB-056
GTC-RWB-062
GTC-RWB-075
GTC-RWB-100
GTC-TD-031
GTC-TD-037
GTC-TD-042
GTC-TD-050
GTC-TD-056
GTC-TD-062
GTC-TD-075
GTC-TD-100
Hollow Shaft, 0,9 m long with coupling for 7,9 mm brushes, coupling
for 9,5 mm brushes, and coupling for 11,1 to 25.4 mm brushes and
all buffing tools for 7,9 to 25,4 mm I.D. tubes
Hollow Shaft Kit for tubes 7,9 to 12,7 mm I.D. including three
990 mm long hollow extension shafts with couplings to form a
3 m shaft, a 305 mm short hollow extension shaft, coupling to
connect shaft to PSM-500 and couplings to connect brushes,
buffing tools, hollow carbide drills and twist drills to shaft
Hollow Shaft Kit for tubes 14,3 to 25,4 mm I.D. including three
GTC-998 Hollow Extension Shafts with couplings to form a 3 m long
shaft, a 0,3 m shaft, coupling to connect shaft to PSM-500, coupling
to connect brushes, buffing tools, hollow carbide drills and twist drills
to shaft, and assembly tools
Hollow Extension Shaft, 990 mm long for GTC-989-KIT
Hollow Drill Tip, 7,9 mm
Hollow Drill Tip, 9,5 mm
Hollow Drill Tip, 11,1 mm
Hollow Drill Tip, 12,7 mm
Hollow Drill Tip, 14,3 mm
Hollow Drill Tip, 15,9 mm
Hollow Drill Tip, 19,1 mm
Hollow Drill Tip, 25,4 mm
Twist Drill, 7,9 mm
Twist Drill, 9,5 mm
Twist Drill, 11,1 mm
Twist Drill, 12,7 mm
Twist Drill, 14,3 mm
Twist Drill, 15,9 mm
Twist Drill, 19,1 mm
Twist Drill, 25,4 mm
Professional Lights And Accessories
ACCESSORIES
4.5” Pocket Light
This weatherproof Top® pocket light
is powered by three AAA batteries. It
features 12 energy saving LED bulbs,
a shock resistant metal casing, push
button sealed rubber switch and
carrying strap.
PI-LEDLIGHT
Versatile Task Light
The 6” Streamlight LED flashlight
offers superior brightness and a
smooth beam made possible by a
unique reflective optic inside the
lens. There is a high and low setting
along with an emergency strobe
function that can run for up to 48
hours continuously on just two AA
batteries! Its machined aluminum
housing features an unbreakable lens
and is corrosion and water resistant.
GoodLight
The cordless, rechargeable GoodLight
converts from a work light to a
flashlight at the flip of a switch. The
low voltage LED lights are cool to
the touch, and at full charge will run
for up to 30 hours. It features both a
magnetic holder and revolving hook
for easy placement.
GL-30
Mega Light
This powerful spot light features
a 130 watt halogen bulb for extreme
illumination. It is powered by a
rechargeable 12 V sealed lead acid
battery and comes with a swivel stand,
removable strap, and 115 V AC to DC
charger and 12 V DC car plug charger.
PI-MEGA
PI-TITANIUM
Stainless Steel Travel Mug
This insulated stainless steel mug
features a twist-on cap with a sliding
sip cover to prevent spills. It will keep
coffee hot and drinks cold for the
maintenance technician on the go.
PI-GMUG
Flex Light
This versatile Streamlight® pocket
light has a flexible, insulated cable,
allowing up to 14” of reach. Its
unbreakable 100,000 hour LED never
needs to be replaced. It features
a momentary “blink” or constant
“on” switch, is waterproof, and
comes with a lifetime warranty.
6.5” Pocket Light
Head Lamp
PI-6.5-LIGHT
PI-LAMP
This handy Streamlight pocket light
is powered by two AA batteries
and will run for over 1 hour. It
features a 50,000 hour LED lamp,
push button tail cap switch, pocket
clip and case.
This unique Streamlight work light
comes with both elastic and rubber
head straps. It runs on three AAA
batteries and features 100,000 hour
LEDs with three brightness levels. It
will run for 150 hours on a single LED.
PI-FLEXLIGHT
27
The World’s Most Popular Firetube Boiler Cleaner
SAM-3 – Easy Operation
You might as well be burning money if you’re allowing soot to collect in your boiler
firetubes. At five times the insulating value of asbestos, just a small amount of soot can
cause dramatic heat loss and substantially increase fuel consumption. Now in its 3rd
generation, the SAM-3 Firetube Boiler Cleaner removes soot and scale in almost no time,
enabling your system to run at optimal efficiency. A cleaning tool mounted to a 7,9 m spring
steel tape does the dirty work of loosening soot buildup while an in-line vacuum attachment
handles clean-up duties. All you have to do is flip the switch. It’s that easy. And yes, it’s
that efficient.
Boiler Cleaning Systems
(with Vacuums):
SAM-3-20-KIT
Boiler Firetube
Punching Machine,
including a 50,8 mm x 3,66 m
hose, 457,2 mm straight
bayonet nozzle (specify
diameter), brush and
GTC-540-20SS SootVac®
Vacuum
FEATURES
> Spring steel tape
> Auto feed trigger switch
> Brush travel indicator
> Interchangeable cleaning tools
> Simultaneous vacuum to remove deposits
> Carrying handle and stand
Specifications
SAM-3
.4 kW
Standard: 7 amps, 115 V, 50/60 Hz AC
Optional: 3.5 amps, 230 V, 50/60 Hz
7,9 m
Tape Length
7,2 m, 18-3
Power Supply Cord:
51 mm diameter x 3,7 m long
Vacuum Hose:
546 mm long (without nozzle)
Dimensions:
17.2 kg
Weight:
Optional Carrying Case: 610 mm (H) x 711 mm (W) x 229 mm (D)
Motor Power:
Input Power:
Deposits and Boiler Performance
28
Soot in
Boiler Tubes
Heat
Loss
Increased Fuel
Consumption
.8 mm
1.5 mm
3.3 mm
12%
24%
47%
21/2%
41/2%
81/2%
SAM-3-15-KIT
Boiler Firetube
Punching Machine,
including a 50,8 mm x 3,66 m
hose, 457,2 mm straight
bayonet nozzle (specify
diameter), brush and
GTC-540-15SS SootVac
Vacuum
SAM-3-30-KIT
Boiler Firetube Punching Machine,
including a 50,8 mm x 3,66 m hose,
457,2 mm straight bayonet nozzle
(specify diameter), brush
and GTC-540-30DD
SootVac Vacuum
SAM-3-55-KIT
Boiler Firetube Punching Machine,
including a 50,8 mm x 3,66 m hose,
457,2 mm straight bayonet nozzle
(specify diameter), brush and
GTC-540-55DD SootVac Vacuum
Note: See Tube Sizes Chart on page 29 for nozzle
and brush sizes.
BOILER MAINTENANCE
HOSE TO
VACUUM
Steel Brushes:
Steel brushes are recommended for removing soot and
light scale deposits.
GTC-151 Steel Brushes for tubes 35.1 mm, 41.4 mm, 50.8
mm, 63.5 mm”, 76.2 mm, 88.9 mm or 101.6 mm O.D.
FTS Scraper Tools:
FTS Scraper Tools are medium action, spring loaded tools.
They are used for removing light scale deposits in boiler
firetubes when steel brushes do not remove all deposits.
Ferrule extension required.
FTS-200 Scraper Tool for tubes 50.8 mm O.D.
Ferrule Extensions:
Scraper tools require ferrule extensions. Select the ferrule
extension to match the bayonet nozzle in use.
FE-375 Ferrule Extension for scraper tools when using
BFN-152 Short Bayonet Nozzles
FE-2100 Ferrule Extension for scraper tools when using
BFN-152S or BFN-152SA Straight Bayonet Nozzles
Note: Scraper tools cannot be used with BFN-152X or
BFN-152XA Offset Bayonet Nozzles.
Standard Bayonet Nozzles:
FTS-250 Scraper Tool for tubes 63.5 mm O.D.
BFN-152 Short Bayonet Nozzle, 88.9 mm long for tubes
35.1 mm, 41.4 mm, 50.8 mm, 63.5 mm, 76.2 mm or 88.9
mm O.D.
FTS-300 Scraper Tool for tubes 76.2 mm O.D.
BFN-152S Straight Bayonet Nozzle, 457,2 mm long for
tubes 35.1 mm, 41.4 mm, 50.8 mm, 63.5 mm”, 76.2 mm or
88.9 mm O.D.
BFN-152SA Straight Bayonet Nozzle, 457,2 mm long
with ferrule extension for tubes 4” O.D.
GTC-151
BFN-152X Offset Bayonet Nozzle, 457,2 mm long for
tubes 35.1 mm, 41.4 mm, 50.8 mm, 63.5 mm”, 76.2 mm or
88.9 mm O.D.
BFN-152XA Offset Bayonet Nozzle, 457,2 mm long
with ferrule extension for tubes 101.6 mm O.D.
Note: Contact factory if longer Straight or Offset Bayonet
Nozzlesare needed for your application.
Note: When ordering bayonet nozzles or brushes, specify part
number and size according to the table (order by tube O.D.).
Bayonet nozzle and brush diameters will fit tube I.D.
FTS
SCRAPER TOOL
Carrying Case:
SC-682 Carrying Case for SAM-3 Boiler Firetube Punching
Machine and accessories
BFN-152
BFN-152S
BFN-152X
SC-682
Carrying
Case
Tube Sizes
Standard Boiler
O.D. Size
Approximate Boiler
I.D. Size
35.1 mm
41.4 mm
50.8 mm
63.5 mm
76.2 mm
88.9 mm
101.6 mm
32 mm
38 mm
44 to 48 mm
57 to 60 mm
70 to 73 mm
83 mm
95 mm
29
Package Boilers Cruiserweight Champion
SAM-JR
FEATURES
> Preset brush travel
> Dual distance indicators
> Rear-mounted power switch
> Slip clutch
> Quick change tape system for easy maintenance
of unit
> Light weight
> Cleans up to 4.9 m long by 50.8 mm – 63.5 mm OD
tubes
> Collapsing Brush
Weighing in at over 9 kg lighter than the SAM-3, the SAM-JR is the cleaning
system you need for small gas fired boilers, package boilers or any smaller fire tube
boiler with light to moderate soot deposits. SAM-JR’s smaller size and weight
makes cleaning fire tube boilers in close quarters simple. Plus SAM-JR features a
“dial in” tube length and dual distance indicators making tube punching fire tube
boilers even easier!
SAM-JR
Firetube Boiler Punching system, including 120 V 50/60 Hz Tube Punching machine, 459.2 mm Straight
nozzle and brush (specify tube O.D. of 50.8 mm or 63.5 mm)
SAM-JR-A
Firetube Boiler Punching system, including 230 V 50/60 Hz Tube Punching machine, 459.2 mm Straight
nozzle and brush (specify tube O.D. of 50.8 mm or 63.5 mm)
Accessories:
S4-BRUSH-200 Brass Brush for 50.8 mm O.D. tube
S4-BRUSH-250 Brass Brush for 63.5 mm O.D. tube
S4-NOZ-200 459.2 mm Straight Nozzle for 50.8 mm O.D. tube
S4-NOZ-250 459.2 mm Straight Nozzle for 63.5 mm O.D. tube
GTC-170S-QD Hose, 50.8 mm x 3.7 m with sleeve, quick connect and washer for attaching to
vacuum cleaner
Specifications
SAM-JR
Motor Power:
Input Power:
.4 kW
Standard: 8 amps, 120 V, 50/60 Hz AC
Optional: 4 amps, 230 V, 50/60 Hz
4,9 m
3,7 m, 18-3
459.2 mm (H) x 203 mm (W) x 584.2 mm (D)
9 kg
Tape Length
Power Supply Cord:
Dimensions:
Weight:
30
BOILER MAINTENANCE
SOOTVAC®-JR
In SAM-JR’s corner collecting all that soot is SootVac-JR. Mounted on a
sturdy dolly and weighing only 9 kg, lifting and portability is a breeze. Handling
fine soot dust is no problem with a washable high efficiency cartridge filter
protected by a 10 micron filter bag ensuring soot stays in the collection tank.
Designed for gas fired or light deposits, an inner plastic bag makes collection,
sealing and disposal simple. Included accessories make the SootVac-JR a
perfect solution for cleanup around the boiler room.
SootVac-JR
Vacuum Cleaner 115 V 50/60 Hz, on 26.5 L stainless steel tank and dolly with 2.4 m hose for
connection to the SAM-JR with crevice tool, floor tool, round brush
SootVac-JR -A
Vacuum Cleaner 230 V 50/60 Hz, on 26.5 L stainless steel tank and dolly with 2.4 m hose for
connection to the SAM-JR with crevice tool, floor tool, round brush
Accessories:
8052 10 micron filter protector
BV-5-18 Washable high efficiency (to 0.3 micron) cartridge filter
POLY-H-JR-10 Plastic Collection bags, pack of 10.
FEATURES
> 2.4 m collapsible hose
> Disposable plastic collection bag
> 10 micron filter protector
> Washable high efficiency 0.3 micron cartridge filter
> Stainless steel tank and carry handle
>Dolly
Specifications
SootVac-JR
Motor Power:
Input Power:
.7 kW
Standard: 6.7 amps, 115 V, 50/60 Hz AC
Optional: 4 amps, 230 V, 50/60 Hz
1,8 m, 18-3
1524 mm
100 CFM
10 micron filter protector high efficiency
(to 0.3 micron) cartridge filter
26.5 L
15.14 L
89 dBA
508 mm diameter tank x 609.6 mm high
9 kg
Power Supply Cord:
Static Water Lift:
Air Displacement:
Filtration:
Tank:
Dry Capacity:
Noise Level:
Dimensions:
Weight:
31
Rotary Firetube Boiler Cleaners
TubeGuard™ BLRX:
While performing routine
maintenance or emergency
stoppage work, the waterside
of fire tubes boiler systems
generally remain exposed to
standing water, causing
corrosion to form quickly on
tube walls. This quickly
reduces heat transfer
efficiency and overall system
performance. TubeGuardBLRX sticks offer immediate
treatment of water to protect
tubes against corrosion.
Simple and effective. Apply 4 sticks per
111.855 kW of boiler capacity.
TUBEGUARD BLRX Solid chemical form, multifunctional corrosion inhibitor/lay-up treatment. One
resealable tube, package of four chemical sticks.
Flexible Shafts (Covered Steel Casing)
for Tubes 25,4 mm I.D. and Up
GTC-721-15 Flexible Shaft, 4,6 m
GTC-721-25 Flexible Shaft, 7,6 m
GTC-721-35 Flexible Shaft, 10,7 m
GTC-721-50 Flexible Shaft, 15,2 m
Flexible Shafts (Heat Resistant 149°C
Rigid Covered Steel Casing) for Tubes
25,4 mm I.D. and Up
GTC-721G-15 Flexible Shaft, 4,6 m
GTC-721G-25 Flexible Shaft, 7,6 m
GTC-721G-35 Flexible Shaft, 10,7 m
GTC-721G-50 Flexible Shaft, 15,2 m
Flexible Shafts (High Temperature
Tolerant 232°C Stainless Steel Casing)
for Tubes 25,4 mm I.D. and Up
GTC-821-15 Flexible Shaft, 4,6 m
GTC-821-25 Flexible Shaft, 7,6 m
GTC-821-35 Flexible Shaft, 10,7 m
GTC-821-50 Flexible Shaft, 15,2 m
Spring Filled Brushes:
Spring Filled Brushes are recommended
for removing heavy scale deposits.
The spring bristles dig into the scale,
breaking it free from the tube wall.
SFB-200 Spring Filled Brushes for tubes
35, 41, 51, 64 or 76 mm O.D.
SFB-300 Spring Filled Brushes for tubes
51 or 76 mm I.D.
32
Specific Models Only
Heavy-Duty
RAM
Tube Cleaner
Heavy-Duty
RAM
Tube Cleaner
Specific Models Only
FEATURES
> Stainless steel
construction
> Quick connect threadless
shaft manifold
> Interchangeable cleaning
tools
> Integrated dolly
> Simultaneous vacuum
> Foot switch activation
Specifications
RAM-4X
RAM-4X2A
Application:
Tube Size Range:
Motor Power:
Input Power:
Smooth Bore Tubes/Pipes/Hoses
25,4 mm I.D. and Up
0,7 kW
13 Amps, 115 V, 60 Hz AC
Optional 13 Amps, 115 V, 50 Hz;
6,5 Amps, 230 V, 60 Hz;
or 6,5 Amps, 230 V, 50 Hz
6,5 m, 14-3 GFCI
1.725 RPM (Optional: 862,5)
Manual
Maximum 22,9 m
Minimum 2,1 BAR at 11,4 LPM
Optional Vacuum Attachment
940 mm High x 510 mm Wide x
430 mm Deep
27 kg
Smooth Bore Tubes/Pipes/Hoses
25,4 mm I.D. and Up
1,5 kW
11,5 Amps, 230 V, 60 Hz AC
Optional 11,5 Amps, 230 V, 50 Hz
•
•
6,5 m, 14-3 GFCI
1.725 RPM (Optional: 862,5)
Manual
Maximum 22,9 m
Minimum 2,1 BAR at 11,4 LPM
Optional Vacuum Attachment
940 mm High x 510 mm Wide x
430 mm Deep
35 kg
Power Supply Cord:
Shaft Speed:
Shaft Feed Method:
Shaft Length:
Water Requirements:
Special Features:
Dimensions:
Weight:
Dry Pickup Attachment:
GTC-DPA Dry Pickup Attachment,
including 51 mm x 3,7 m hose
with quick connect fitting
(order nozzle below)
Bayonet Nozzles:
BFN-152S Straight Bayonet Nozzle,
460 mm long for tubes 35, 41, 51, 64,
76 or 89 mm O.D.
BFN-152SA Straight Bayonet Nozzle,
460 mm long for tubes 102 mm O.D.
BOILER MAINTENANCE
SootVac® Soot Recovery Vacuum
FEATURES
Specific Models Only
Specific Models Only
TANGENTIAL
INTAKE
> Two heavy-duty motors
> Exhaust muffler (only 82 dBA)
> Reusable filters
> Four tank sizes
> 40 mm or 50 mm hoses
DUAL FILTER
ASSEMBLY
DISPOSABLE
POLYETHYLENE
BAG
SUCTION
EQUALIZER
HOLES
STAINLESS
STEEL
76 LITER
DRUM
Specifications
GTC-540-20
Motor Power:
Input Power:
1,7 kW
14 Amps, 115 V, 50/60 Hz AC
Optional: 7 Amps, 230 V, 50/60 Hz AC
11,3 m, 14-3
1,3 m
459 m3/h
15 Microns Polypropylene/Dacron
76 Liters Stainless Steel
76 Liters
78 dBA
Polyethylene Tank Liner
Disposable Collection Bag
430 mm Diameter Tank x 1,2 m High
32 kg
Power Supply Cord:
Static Water Lift:
Air Displacement:
Filtration:
Tank:
Dry Capacity:
Noise Level:
Special Features:
Dimensions:
Weight:
Attachments:
VAC-049QD Steel Crevice Tool with quick connect
GTC-167 Cleanup Tool with quick connect
GTC-167R Replacement Bristle for GTC-167 Cleanup Tool
GTC-168 Flat Surface Paw Scraper Tool with quick connect
GTC-170 Replacement Hose, 50 mm x 3,7 m for Soot-A-Matic
GTC-170SQD Hose, 50 mm x 3,7 m with sleeve, quick connect and washer
Replacement Filters, Drum Liner and Bags:
GTC-175 Polypropylene Filter
GTC-176 Dacron Filter
PDL-30 High Density Polyethylene Liner for 76 or 114 liter drum
POLY-20-25 Disposable Polyethylene Bag (package of 25) for 76 liter drum
POLY-30-25 Disposable Polyethylene Bag (package of 25) for 114 liter drum
GTC-170SQD
VAC-049QD
GTC-167
GTC-168
POLY-30-25
PDL-30
GTC-175
GTC-176
33
QuickShot® Surface Condenser Tube Cleaner
FEATURES
> Compact
> Power assisted trigger
> Automatic pressure relief system
> Rugged construction
Specifications
QS-300
Application:
Tube Size Range:
Air Requirements:
Water Requirements:
Special Features:
Smooth Bore Tubes
15,9 mm to 38 mm O.D.
3,4 to 10,3 BAR at 85 m3/h
Maximum 10,3 BAR at 19 LPM
Air Powered
Water Flush
3 m Air and 3 m Water
230 mm Long
1,4 kg, Net Dry
Hoses:
Dimensions:
Weight:
Optional:
QA-1051 Replacement Nozzle
QA-1051-12 Extension Nozzle,
305 mm long
QSP-1212 Mesh Tarp,
3,7 m high x 3,7 m wide
TH Tarp Holder, 15,9 mm, 19,1 mm,
22,2mm or 25,4 mm, 16 to 18 or 19 to
22 gage (specify size)
WATER
34
AIR
FEATURES
> One- or two-handed use
> Rugged ABS outer shell
> Air-assisted trigger
> Removable aluminum
shoulder
stock
> Compact, ergonomic design
> Easily interchangeable nozzles
> Clear, removable splash shield
> Reliable cleared tube indicator
> Flow rate up to 190 LPM
> Internal vacuum break
Specifications
BSL-50
Application:
Tube Size Range:
Air Requirements:
Water Requirements:
Special Features:
Smooth Bore Tubes
15,9 mm to 38 mm O.D.
6,2 to 10,3 BAR at 1,7 m3/h
Maximum 41 BAR at 189 LPM
Air Powered
Water Flush
Quick Connect Hose Fittings
3 m Air and 3 m Water
300 mm Long
(560 mm Long with Shoulder Stock)
1,8 kg, Net Dry
(2,3 kg with Shoulder Stock)
Hoses:
Dimensions:
Weight:
CONDENSER MAINTENANCE
BigShot® Surface Condenser Tube Cleaner Gun
Optional:
BSL-NOZZLE Replacement Nozzle
BSL-OFFNOZ 45° Nozzle
QA-1383 Replacement Shield
QSP-1212 Mesh Tarp,
3,7 m high x 3,7 m wide
TH Tarp Holder, 15,9 mm, 19,1 mm,
22,2mm or 25,4 mm, 16 to 18 or 19 to
22 gage (specify size)
35
BigShot® Surface Condenser Tube Cleaner
FEATURES
> Two gun pump
> Comfort grip guns
> Rugged construction
> Up to 28 BAR
Specifications
BFP-3510
Application:
Tube Size Range:
Motor Power:
Input Power:
Smooth Bore Tubes
15,9 mm to 38 mm O.D.
7,5 kW
26 Amps, 230 V, 50/60 Hz AC, Three Phase
Optional 13 Amps, 460 V, 50/60 Hz, Three Phase;
or 12 Amps, 380 V, 50/60 Hz, Three Phase
Power Supply Cord:
7,6 m, 12-4
Water Requirements:
1,4 to 4,8 BAR at 132 LPM
Output Water Pressure:
19 to 28 BAR at 132 LPM
Hoses:
50 mm x 15,2 m Inlet and 20 mm x 15,2 m Outlet
Pump:
Triplex Plunger in Oil Bath
Dimensions:
1.016 mm High x 800 mm Wide x 1.520 mm Deep
Weight:
272 kg, Net Dry
Optional:
QSP-1212 Mesh Tarp,
3,7 m high x 3,7 m wide
TH Tarp Holder, 15,9 mm, 19,1 mm,
22,2mm or 25,4 mm, 16 to 18 or
19 to 22 gage (specify size)
36
TUBE SCRUBBERS
Goodway Tube Scrubbers are the ultimate design
in tube cleaning devices. They are available in
sizes to fit tubes 15,9 to 32 mm O.D. When shot
with a QS-300 Quick Shot Tube Cleaning Gun
they provide the fastest method for removing soft
deposits from tubes.
FEATURES
> Seven scraping disks to prevent streaks
> Buoyant for easy cleaning and retrieval
> Color-coded for easy identification
> Reusable
CONDENSER MAINTENANCE
Tube Cleaning Projectiles
TUBE SCRUBBERS
Part
Number
Color
Type
Tube I.D.
Range (mm)
TS-560-S
TS-560
TS-630-S
TS-630
TS-695-S
TS-695
TS-750-S
TS-750
TS-825-S
TS-825
TS-870-S
TS-870
TS-960-S
TS-960-M
TS-960
Yellow
Yellow
Brown
Brown
Red
Red
Purple
Purple
White
White
Green
Green
Blue
Blue
Blue
Soft
Hard
Soft
Hard
Soft
Hard
Soft
Hard
Soft
Hard
Soft
Hard
Soft
Medium
Hard
12,57 to 13,74
13,39 to 14,10
14,50 to 15,75
15,00 to 16,00
15,75 to 17,15
16,56 to 17,63
16,76 to 18,54
18,03 to 19,05
18,54 to 20,32
19,74 to 20,80
19,81 to 21,59
20,96 to 22,10
22,10 to 23,98
22,50 to 24,13
22,91 to 24,28
TS-1100-S
TS-1100
Black
Black
Soft
Hard
25,40 to 27,56
26,09 to 28,09
TS-1250-S
TS-1250
Gray
Gray
Soft
Hard
27,94 to 30,23
30,23 to 31,75
All Tube Scrubbers are available in either
soft or hard material to cover the complete
range of tube sizes and most tube cleaning
conditions. In most cases hard Tube
Scrubbers are recommended. On the lower
end of the hard Tube Scrubber size range, in
extreme conditions, the user may have to
use soft Tube Scrubbers.
Bi-DIRECTIONAL
STAINLESS STEEL
TUBE BRUSHES
Goodway Bi-Directional Stainless Steel Tube
Brushes provide a unique combination of
aggressive brushing and wiping action. They are
color coded for easy identification, feature
stainless steel bristles set in a coil, and capped at
both ends by three wiping blades. They are ideal
for removing medium to hard deposits from
condenser and component heat exchanger tubes.
FEATURES
> Bi-directional for easy loading
> Hybrid Design for maximum cleaning power
> Color-coded for easy identification
> Reusable
BI-DIRECTIONAL STAINLESS STEEL TUBE BRUSHES
Part Number
CBS-075-18
CBS-075-20
CBS-075-22
CBS-087-18
CBS-087-20
CBS-087-22
CBS-100-16
CBS-100-18
CBS-100-20
CBS-100-22
CBS-112-18
CBS-112-20
CBS-112-22
CBS-125-18
CBS-125-20
CBS-125-22
Piston Color
Black
Red
Blue
White
Red
Blue
Yellow
White
Red
Blue
Black
Red
Blue
Black
Red
Blue
Tube 0.D.
19.05 mm
19.05 mm
19.05 mm
22,2 mm
22,2 mm
22,2 mm
25,4 mm
25,4 mm
25,4 mm
25,4 mm
28.57 mm
28.57 mm
28.57 mm
31.75 mm
31.75 mm
31.75 mm
Gage
18
20
22
18
20
22
16
18
20
22
18
20
22
18
20
22
Tube I.D.
16.56 mm
17.27 mm
17.63 mm
19,74 mm
20,45 mm
20,80 mm
22,10 mm
22,91 mm
23,62 mm
23,98 mm
26,08 mm
26,79 mm
27,15 mm
29,26 mm
29,97 mm
30,32 mm
Bi-directional Stainless Steel Tube Brushes
are available for tubes 22,2 to 25,4 mm
O.D.with BWG ranges 16-22.
37
NYLON COILED BRUSHES
Goodway Nylon Coiled Tube Brushes incorporate a revolutionary piston design. They feature durable nylon bristles set in a coil, wrapped
around a wear resistant polymer core. Superior to wooden dowel cores, Goodway’s piston design allows the brushes to be quickly inserted
into the tubes and helps maximize the cleaning effectiveness of the bristles. They are ideal for removing soft to medium deposits from
condenser and component heat exchanger tubes.
FEATURES
COILED BRUSHES
Part
Number
Piston
Color
Tube 0.D.
Gage
Tube I.D.
CB-062-18
CB-075-18
CB-075-20
CB-075-22
CB-087-18
CB-087-20
CB-087-22
CB-100-16
CB-100-18
CB-100-20
CB-100-22
White
White
Red
Blue
White
Red
Blue
Yellow
White
Red
Blue
15,9 mm
19,1 mm
19,1 mm
19,1 mm
22,2 mm
22,2 mm
22,2 mm
25,4 mm
25,4 mm
25,4 mm
25,4 mm
18
18
20
22
18
20
22
16
18
20
22
13,39 mm
16,56 mm
17,27 mm
17,63 mm
19,74 mm
20,45 mm
20,80 mm
22,10 mm
22,91 mm
23,62 mm
23,98 mm
> Piston design for maximum speed
> Color-coded for easy identification
> Reusable
Nylon Coiled Tube Brushes are
available for tubes 15,9 to 32 mm
O.D. with BWG ranges 16 to 22.
BI-DIRECTIONAL COILED BRUSHES
Goodway Bi-Directional Coiled Tube Brushes can be shot from
either end. They are color coded for easy identification and
feature durable nylon bristles set in a coil, wrapped around
a wear resistant 75 mm polymer core. This design allows the
brushes to be quickly inserted into the tubes, with out regard to
direction, and helps maximize the cleaning effectiveness and the life
of the bristles. They are ideal for removing soft to medium deposits
from condenser and component heat exchanger tubes.
FEATURES
BI-DIRECTIONAL COILED BRUSHES
38
Part
Number
Piston
Color
Tube 0.D.
Gage
Tube I.D.
CB3-087-18
CB3-087-20
CB3-087-22
CB3-100-16
CB3-100-18
CB3-100-20
CB3-100-22
CB3-112-16
CB3-112-18
CB3-112-20
CB3-112-22
CB3-125-16
CB3-125-18
CB3-125-20
CB3-125-22
CB3-137-16
CB3-137-18
CB3-137-20
CB3-137-22
CB3-150-16
CB3-150-18
CB3-150-20
CB3-150-22
White
Red
Blue
Yellow
White
Red
Blue
Yellow
White
Red
Blue
Yellow
White
Red
Blue
Yellow
White
Red
Blue
Yellow
White
Red
Blue
22,2 mm
22,2 mm
22,2 mm
25,4 mm
25,4 mm
25,4 mm
25,4 mm
29 mm
29 mm
29 mm
29 mm
32 mm
32 mm
32 mm
32 mm
35 mm
35 mm
35 mm
35 mm
38 mm
38 mm
38 mm
38 mm
18
20
22
16
18
20
22
16
18
20
22
16
18
20
22
16
18
20
22
16
18
20
22
19,74 mm
20,45 mm
20,80 mm
22,10 mm
22,91 mm
23,62 mm
23,98 mm
25,27 mm
26,09 mm
26,80 mm
27,15 mm
28,45 mm
29,26 mm
29,97 mm
30,33 mm
31,62 mm
32,44 mm
33,15 mm
33,50 mm
34,80 mm
35,61 mm
36,32 mm
36,68 mm
> Bi-directional for easy loading
> 75 mm long for larger cleaning surface
> Piston design for maximum speed
> Color-coded for easy identification
> Reusable
Bi-directional 75 mm Coiled Tube Brushes
are available for tubes 22,2 to 38 mm O.D.
with BWG ranges 16 to 22.
POLYMER
SUPER SCRUBBERS
Goodway Polymer Super Scrubbers clean without
scratching. These scrubbers come equipped with
wear resistant polymer blades and resilient
nitrile bushings. Each reusable projectile is colorcoded to size and features a patented force
adjustment, preset by the factory, to match both
the type of deposit and the tube material. They
are designed for use with the BFP-3510 Big Shot
Tube Cleaning System.
FEATURES
> Polymer blades
> Nitrile bushings
> Color-coded for easy identification
> Reusable
Polymer Super Scrubbers are available for tubes
22,2 mm to 25,4 mm O.D. with BWG ranges
16 to 25.
CONDENSER MAINTENANCE
Tube Cleaning Projectiles Continued
POLYMER
SUPER SCRUBBERS
Goodway Carbon Steel Super Scrubbers are
the most advanced tube cleaning projectiles
available. They come equipped with either high
tensile carbon steel blades and resilient nitrile
bushings. Each reusable projectile is color-coded
to size and features a patented force adjustment,
preset by the factory, to match both the type of
deposit and the tube material. When shot with
a BFP-3510 Big Shot Tube Cleaning System they
provide the best method for removing hard
deposits from power plant condenser tubes.
FEATURES
> Carbon steel blades
> Nitrile bushings
> Color-coded for easy identification
> Reusable
Carbon Steel Super Scrubbers are available for
tubes 15,9 mm to 32 mm O.D. with BWG ranges
16 to 25.
39
SUPER SCRAPERS
Goodway Super Scrapers are virtually
indestructible. They will not rust or crush under
normal working conditions. They feature
stainless steel blades which are precision
engineered to match the internal diameter of the
tube to be cleaned. This precise sizing of the
blades to the tube specifications allows the
scrapers to remove even the most stubborn
deposits. They are ideal for hard scale, calcium,
manganese and tough biological growth like
zebra muscles.
FEATURES
> Stainless steel blades
> Modular design
> Color-coded for easy identification
> Reusable
Super Scrapers are available for tubes 15,9 to
32 mm O.D. with BWG ranges 18 to 22.
40
Specifications
JetLoad®
JetLaunch®
JetLaunch®-XL
Air Requirements:
Minimum 4,1 BAR
Maximum 6,9 BAR
203 to 254 mm long (depending on nozzle)
.8 kg
410 mm (H) x 460 mm (W) x 530 mm (D)
Minimum 6,2 BAR
Maximum 8,3 BAR
75 to 130 mm long (depending on nozzle)
0,7 kg
410 mm (H) x 460 mm (W) x 530 mm (D)
Minimum 6,2 BAR
Maximum 10,3 BAR
304 to 279 mm long (depending on nozzle)
3,2 kg
381 mm (H) x 508 mm (W) x 139 mm (D)
Dimensions:
Weight:
Optional Carrying Case:
Speed Load
Pneumatic
Hose/Tube
Cleaning Gun
Pneumatic
Hose/Tube
Cleaning Gun
HYDRAULIC HOSE MAINTENANCE
Pneumatic Hose / Tube Cleaning Guns
PATENTED
JETLOAD®
JETLAUNCH®
JL-5010 JetLoad Pneumatic Cleaning Gun Only
JCL-2010 JetLaunch Pneumatic Cleaning Gun Only
JCL-3000 Adapter Ring for nozzles 4.7625 mm - 31.75 mm
JCL-3000 Adapter Ring for nozzles 4.7625 mm - 31.75 mm
JL-5030 JetLoad Pneumatic Hose Cleaning Gun,
including 9 standard hose nozzles and carrying case
JCL-2030 JetLaunch Pneumatic Hose Cleaning Gun,
including 9 standard hose nozzles and carrying case
JCL-5030 JetLoad Pneumatic Hose Assembly Cleaning
Gun, including 9 standard coupling nozzles and carrying case
JIL-2030 JetLaunch Pneumatic Hose Assembly Cleaning Gun, including 9 standard coupling nozzles and
carrying case
JLT-5030 JetLoad Pneumatic Tube Cleaning Gun,
including 9 standard tube nozzles and carrying case
FEATURES
> Hinged faceplate for easy loading of projectiles
> Pressure relief valve to eliminate back pressure
> Trigger guard
> Quick connect fittings
JETLAUNCH®-XL
JetLaunch-XL JetLaunch Pneumatic Cleaning
Gun, nizzle and carrying case
JCL-2060 JetLaunch Pneumatic Tube Cleaning Gun,
including 9 standard tube nozzles and carrying case
FEATURES
> Trap door for quick loading of projectiles
> Pressure relief valve to eliminate back pressure
> Trigger guard
> Quick connect fittings
Pneumatic Hose/Tube
Cleaning Gun for tubes
50 to 114 mm
41
Pneumatic Hose / Tube Cleaning Nozzles
NOZZLES FOR JETLOAD®, JETLAUNCH® AND JETLAUNCH® XL
Nozzles:
Nozzles are available for cleaning any tube, pipe or hose 4.76 - 50 mm I.D. Hose nozzles are tapered
to fit inside the ends of hoses. Tube nozzles are designed to butt up against the ends of tubes and
pipes for complete end to end cleaning. JIC nozzles are available for thorough cleaning of hoses with
attached couplings.
Note: Custom nozzles available.
Part Number
JCN-2100
JCN-2120
JCN-2130
JCN-2140
JCN-2150
JCN-2160
JCN-2170
JCN-2180
JCN-2190
42
For Hose I.D.
6.3 mm
9.4 mm 12.7 mm
15.7 mm 19.05 mm 24.4 mm
31.75 mm
38.1 mm
50.8 mm
Qty
Part Number For Tube/Pipe O.D.
6.3 mm
JCN-02505
9.4 mm
JCN-03705
12.7 mm
JCN-05010
15.7 mm
JCN-06207
19.05 mm
JCN-07508
JCN-10012
24.4 mm
JCN-12512
31.75 mm
JCN-15012
38.1 mm
JCN-20012
50.8 mm
Qty
Part Number For Coupling Sizes
6.3 mm
JIC-2100
9.4 mm
JIC-2120
12.7
mm JIC-2130
15.7 mm
JIC-2140
19.05 mm
JIC-2150
JIC-2160
24.4 mm
JIC-2170
31.75 mm
JIC-2180
38.1 mm
JIC-2190
50.8 mm
Qty
PROJECTILES FOR JETLOAD®, JETLAUNCH® AND JETLAUNCH® XL
Standard Projectiles:
Goodway’s Standard Projectiles are specially formulated for use with any pneumatic gun. As a projectile is shot, it
is compressed, loosening and propelling dirt and deposits through the hose, tube or pipe. Projectiles are oversized
to ensure proper compression for maximum cleaning action.
Note: Abrasive projectiles and custom sizes available.
Part Number
JR-07
JR-09
JR-10
JR-12
JR-14
JR-16
JR-18
JR-20
JR-22
JR-26
JR-28
JR-30
JR-33
JR-36
JR-38
JR-40
For I.D. QuantityPrice
4.8 mm100 $22.00
6.3 mm100 $25.00
6.3 mm100 $25.00
7.9 mm100 $28.00
9.4 mm 100
$29.00
11.2 mm100 $32.00
12.7 mm 100
$34.00
14.22 mm100 $38.00
15.7 mm100 $44.00
19.05 mm50 $25.00
20.62 mm
50
$30.00
22.22 mm50 $34.00
25.4 mm
50
$38.00
28.57 mm
50
$50.00
28.57 mm
50
$58.00
31.75 mm
50
$62.00
Part Number
JR-45
JR-50
JR-55
JR-60
JR-65
JR-70
JR-75
JR-80
JR-85
JR-90
JR-95
JR-100
JR-106
JR-110
JR-115
JR-120
For I.D. QuantityPrice
34.92 mm
25
$34.00
38.1 mm
25
$40.00
44.45 mm
25
$45.00
50.8 mm
25
$52.00
55.55 mm
25
$72.00
60.32 mm
25
$86.00
63.50 mm
25
$98.00
69.85 mm
25
$106.00
76.20 mm
25
$118.00
82.55 mm
25
$134.00
88.90 mm
25
$165.00
95.25 mm
25
$170.00
101.6 mm
25
$180.00
106.36 mm 25
$186.00
107.95 mm 25
$198.00
114.3 mm
25
$210.00
MANTENIMIENTO DE SERPENTINES
Pneumatic Hose / Tube Projectiles
PROJECTILE SHOT THROUGH HYDRAULIC HOSE
Coupling Projectiles:
Goodway’s Coupling Projectiles are made from a soft, dense packed foam, designed to allow the projectile to be
shot through a hose, tube or pipe with couplings.
Note: Abrasive projectiles and custom sizes available.
Part Number
JC-07
JC-09
JC-10
JC-12
JC-14
JC-16
JC-18
JC-20
JC-22
JC-26
JC-30
JC-33
JC-40
JC-50
For I.D. Quantity
Price
4.8 mm100 $23.00
6.3 mm100 $26.00
7.9 mm100 $26.00
7.9 mm100 $28.00
9.4 mm100 $30.00
11.2 mm100 $33.00
12.7 mm100 $35.00
14.22 mm100 $40.00
15.7 mm100 $46.00
19.05 mm50 $28.00
22.22 mm 50
$36.00
25.4 mm
31.75 mm
38.1 mm
50
50
25
$40.00
$64.00
$42.00
Part Number
JC-55
JC-60
JC-65
JC-70
JC-75
JC-80
JC-85
JC-90
JC-95
JC-100
JC-106
JC-110
JC-115
JC-120
For I.D. QuantityPrice
44.45 mm
25
$48.00
50.8 mm
25
$62.00
55.55 mm 25
$80.00
60.32 mm
25
$95.00
63.50 mm 25
$110.00
69.85 mm
25
$118.00
76.20 mm
25
$130.00
82.55 mm
25
$148.00
88.90 mm
25
$180.00
95.25 mm
25
$195.00
101.6 mm
25
$215.00
106.36 mm 25
$230.00
114.3 mm
25
$245.00
114.3 mm
25
$250.00
PROJECTILE SHOT THROUGH HYDRAULIC HOSE
WITH COUPLINGS
43
Video Inspection Scopes
> FLEXIBLE PROBE
LESS THAN
10,2 mm
DIAMETER
VS-W-30
VS-S-10
Specifications
Power:
Running Time:
Illumination:
Focal Length:
Field of View:
Viewing Direction:
Minimum Radius:
Image Transfer:
Resolution:
Interface:
Still Image Recording Format:
Video Recording Format:
Operating Temperature:
Dimensions:
Weight:
44
VS-S-10
VS-W-30
3,7 V, rechargeable li-polymer battery
3,7 V, rechargeable li-polymer battery
4 hours
4 hours
6 LED’s
6 LED’s
10 mm – 50 mm
10 mm – 50 mm
53°
53°
0° or 90°
0° or 90°
51 mm
51 mm
RCA cable
RCA cable
307.200 pixels
307.200 pixels
Mini USB 1.1
Mini USB 1.1
JPEG, 640 x 480 pixels
JPEG, 640 x 480 pixels
ASF, 320 x 240 pixels
ASF, 320 x 240 pixels
0°–50°C
0°–50°C
Probe: < 10,2 mm diameter x 3 m or 9,1 m long Probe: < 10,2 mm diameter x 3 m or 9,1 m long
(depending on model)
(depending on model)
Screen: 90 mm diagonal
Screen: 90 mm diagonal
Monitor with 3 m Probe: 0,91 kg
Monitor: 0,36 kg
Monitor with 9,1 m Probe: 2,5 kg
3 m Probe: 0,45 kg
•
9,1 m Probe: 2,2 kg
•
Transmitter: 0,09 kg
FEATURES
> 307.200 pixels CMOS
image sensor
> 6.35 or 8.9 cm LCD color
monitor (depending on model)
> 6 high intensity white LED’s
> Flexible image probe
> 53° field of view
> 90° right angle mirror adapter
> Waterproof probe
> Shock resistant optics
> Compatible with SD Card
FEATURES
> Visible pressure gauges
> Rugged construction
> Multiple seal sizes
> Quick connect fittings
> Compact
Specifications
LD-2X2
Tube Size Range:
Air Requirements:
Dimensions:
Weight:
19,1 to 25,4 mm I.D.
Maximum 6,9 BAR at 25 m3/h
230 mm High x 265 mm Wide x 70 mm Deep
0,9 kg (Per Gun)
TESTING EQUIPMENT
Tube Leak Detector
Seal Kits:
LDW-075 Seal Kit with two seals for tubes
19,1 mm O.D., 16 to 18 gauge and two seals
for tubes 19,1 mm O.D., 19 to 22 gauge
LDW-078 Seal Kit with two seals for tubes
22,2 mm O.D., 16 to 18 gauge and two seals
for tubes 22,2 mm O.D., 19 to 22 gauge
LDW-100 Seal Kit with two seals for tubes
25,4 mm O.D., 16 to 18 gauge and two seals
for tubes 25,4 mm O.D., 19 to 22 gauge
Optional:
LDA-058A Adapter Assemblies (two) for tubes
15,9 mm O.D., 16 to 18 gauge (one for each gun)
LDA-058B Adapter Assemblies (two) for tubes
15,9 mm O.D., 19 to 22 gauge (one for each gun)
45
Stack Efficiency Tester
> NOx TESTER AVAILABLE
FEATURES
> Automatic calibration
> Real time display of measurements and calculations
> Optional printer
SET-200 Stack Efficiency Tester, including protective
rubber boot, testing probe and carrying case
SET-200P Same as SET-200 except with printer
Specifications
SET-200
Flue Temperature Measurement:
Resolution 0,6°C,
Accuracy ± 2,8°C
Range 0° to 600°C
Resolution 0,1%,
Accuracy ± 0,2%,
Range 0 to 21%
Resolution 1ppm,
Accuracy ± 10ppm
< 100ppm ± 0,5%
Range 0 to 4.000ppm
Resolution 0,1%,
Accuracy ± 0,3%,
Range 0 to 30%
Resolution 0,1%,
Accuracy ± 1%,
Range 0 to 99,9%
Resolution 0,1%,
Accuracy ±0,2%,
Range 0 to 250%
Natural Gas, Light Oil,
Heavy Oil and Propane
510 Long, with 1,8 m Hose
60 mm High x 100 mm Wide x
220 mm Deep
1 kg
O2 Gas Measurement:
CO Gas Measurement:
Calculated CO2 :
Calculated Efficiency :
Calculated Excess Air :
Preprogrammed Fuels:
Probe Dimensions:
Handset Dimensions:
Weight:
46
HVAC MAINTENANCE
Rotary Duct Cleaner
FEATURES
> Stainless steel construction
> Speed control to set shaft rotation to
optimum speed for each application
> Reversible shaft rotation
> Interchangeable cleaning tools
> Integrated dolly
> Simultaneous vacuum
> Belt switch activation
Specifications
AQR-1500
Motor Power:
Input Power:
0,7 kW
6 Amps, 115 V, 60 Hz AC
Optional 6 Amps, 115 V, 50 Hz;
3 Amps, 230 V, 60 Hz;
or 3 Amps, 230 V, 50 Hz
6,5 m, 14-3 GFCI
•
Variable/Reversible 1.500 RPM
Manual
Maximum 18,3 m
Reversible Shaft Rotation
940 mm High x 510 mm Wide x
430 mm Deep
22 kg Net Dry
Power Supply Cord:
Air Requirements:
Shaft Speed:
Shaft Feed Method:
Shaft Length:
Special Features:
Dimensions:
Weight:
SPIN DOOR ACCESS
FLEXIBLE
SHAFT
DUCT
FAN
BRUSH
BLADDER
HOSE TO
VACUUM
Did you know...?
90% of all ventilation system component
failures are caused by debris in ducts.
Note: See page 50-51 for shafts, brushes and accessories.
Note: A dust mask and safety goggles must be worn when operating this equipment – see page 51.
47
Duct Vacuum
FEATURES
> Two speed motor
> Large HEPA filter
> Pressure gauge to monitor HEPA filter
> Large wheels
> 300 mm hose
Note: A dust mask and safety goggles must be worn when operating
this equipment – see page 43.
Replacement Filters
AQ-F0009 Disposable Pleated Filter
AQ-F0044 Electrostatic Filter
AQ-F0046 HEPA Filter
AQ-F0009
AQ-F0044
AQ-F0046
Specifications
AQ-V2M
Motors:
Motor Power:
Input Power:
Twin
2,2 kW (Total)
15 Amps, 115 V, 60 Hz AC
Optional: 15 Amps, 115 V, 50 Hz;
7,5 Amps, 230 V, 60 Hz
Two 7,6 m, 12-3 (On Two Seperate Circuts)
130 mm
1.359 m3/h (One Motor)
2.718 m3/h (Two Motors)
Disposable Pleated,
Electrostatic and
0,3 Microns HEPA
64 Liters
86 dBA
HEPA Filter
1.400 mm High x 580 mm Wide x 610 mm Deep
66 kg
Power Supply Cord:
Static Water Lift:
Air Displacement
Filtration:
Dry Capacity:
Noise Level:
Special Features:
Dimensions:
Weight:
Note: The AQ-V2M allows the operator to select an airflow of either 1.359 or 2.718 m3/h, depending on the size
of the duct.
48
HVAC MAINTENANCE
Duct Vacuum
AQ-RV450 Powerful two stage vacuum, remote control, twin
HEPA cartridge filters and clever modular design make this versatile
air vent cleaning system a no-brainer for any job. The AQ-RV450 can
be used as a roll anywhere self contained air vent cleaning system or
the light weight modular power pack can be detached from the carrier
and placed right next to the job. The two directional rotating brush
safely removes debris while the dual vacuum motors pull up to 201
CFM back through the hose into the module’s disposable vacuum bag.
Clean HEPA filtered air is then exhausted from the bottom of the unit.
AQ-RV450-60
Dual 9.5 and 13 amp, 115 V, 60 Hz. Combination brushing and HEPA filtered vacuum cleaner
machine with 38.1 mm x 10,67 m hose assembly and three duct cleaning brushes
AQ-RV450A-50
11 amp, 230 V, 50/60 Hz. Combination brushing and HEPA filtered vacuum cleaner machine
with 38.1 mm x 10,76 m hose assembly and three duct cleaning brushes
Accessories:
AQ-RV-SHFT15-35 10,67 m x 38.1 mm
Complete hose assembly, blue
AQ-RV-BRSH-08S 203.2 mm Brush, soft
Replacement Filters:
AQ-RV-BRSH-04S 101.6 mm Brush, soft
AQ-RV-BRSH-10S 254 mm Brush, soft
AQ-RV-BRSH-12S 304.8 mm Brush, soft
4212-10 Pre-Filtered Bags, set of 10
4213 HEPA Filter
AQ-RV-BRSH-12X 304.8 mm Brush, stiff
AT-A-GLANCE
> Modular design, use with or without carrier
> Remote vacuum and brush direction control
> Independently controlled twin vacuum motors
> Dual HEPA cartridge filters
> Disposable filter debris bag
> Large diameter rear wheels and lockable casters
> Hose and brush stored on carrier
Specifications
AQ-RV450
Motor Power:
Input Power:
1.8 kW
9.5 and 13 amps
Optional: 11 amps
Two 7,6 m, 14-3
1524 mm - 508 mm (motors high-low)
201 CFM - 89 CFM (at manifold, motors high-low),
111 CFM - 58 CFM (at hose, motors high-low)
450 RPM
Centrifugal
10.67 m x 38.1 mm
Power Supply Cord:
Lift:
Air Flow:
Brush Speed:
Pump:
Hose:
49
Flexible Shafts, Brushes and Accessories
Flexible Shafts (Nylon Casing):
For removing light to medium deposits in horizontal ducts
up to 457.2 mm I.D.
GTC-704-12-C Flexible Shaft, 3.65 m
GTC-704-17-C Flexible Shaft, 5.18 m
GTC-704-C
FAN
BRUSH
Fan Brush:
The fan brush is recommended for
removing debris in round, rectangular
and square ducts. It both loosens and
propels deposits down the duct towards
the vacuum
FDB-212 Fan Brush, 203.2 mm - 457.2 mm
GTC-704-25-C Flexible Shaft, 7.62 m
GTC-704-35-C Flexible Shaft, 10.67m
GTC-704-45-C Flexible Shaft, 13.71 m
GTC-704-60-C Flexible Shaft, 18.29 m
Flexible Shafts (Heat Resistant):
Heat resistant up to 300°F with rigid covered steel casing
for removing light to medium deposits in horizontal ducts
up to 457.2 mm I.D.
GTC-704G-12-C Flexible Shaft, 3.65 m
GTC-704G-17-C Flexible Shaft, 5.18 m
GTC-704G-C
GTC-704G-25-C Flexible Shaft, 7.62 m
GTC-704G-35-C Flexible Shaft, 10.67m
GTC-704G-45-C Flexible Shaft, 13.71 m
GTC-704G-60-C Flexible Shaft, 18.29 m
DUCT
BRUSH
Duct Brush:
Soft nylon duct brushes are recommended
for removing debris in round ducts.
DUCT-04 Duct Brush, 101.6 mm
DUCT-06 Duct Brush, 152.4 mm
DUCT-08 Duct Brush, 203.2 mm
DUCT-10 Duct Brush, 254.0 mm
DUCT-12 Duct Brush, 304.8 mm
DUCT-14 Duct Brush, 355.6 mm
DUCT-16 Duct Brush, 406.4 mm
DUCT-18 Duct Brush, 457.2 mm
Flexible Shafts (Covered Steel Casing):
For removing heavy deposits in horizontal ducts up to
457.2 mm I.D. and in all vertical ducts
GTC-721-15-C Flexible Shaft, 4.57 m
GTC-721-25-C Flexible Shaft, 7.62 m
GTC-721-35-C Flexible Shaft, 10.67m
GTC-721-C
GTC-721-50-C Flexible Shaft, 15.24 m
Note: To order flexible shaft(s) determine duct configuration(s)
and length of longest section(s) to be cleaned. Order flexible
shaft(s) to correspond with configuration(s) and lengths. (Consult
factory for longer flexible shafts if required.)
50
Flare Brush:
FLARE
BRUSH
The flare brush is recommended for removing debris in
round ducts
FBT-502 Flare Brush for ducts 101.6 mm - 203.2 mm I.D.
HVAC MAINTENANCE
Flexible Shafts, Brushes and Accessories
FOGGER
Hole Cutter:
Fogger:
AQ-HC100R Replacement Bit
Note: 230 V unit available – call for price.
Spin Doors:
FreshDuct:
This accessory is designed for use with any standard
power drill to cut a circular hole in a duct.
AQ-HC100 Hole Cutter
These insulated doors quickly mount to holes made in
ducts. Three latches hold each door securely closed. Select
sizes to match the appropriate vacuum hose diameter.
AQ-SD10 Spin Door, 254 mm
AQ-SD12 Spin Door, 304.8 mm
Bladders:
The fogger atomizes the Oxine and FreshDuct solutions for
thorough distribution throughout a duct.
AQ-FG Fogger, 115 V, 50/60 Hz AC
Air ducts are often sources of odors caused by smoke,
pets, cooking, spoilage and other agents. FreshDuct is
specially formulated to control odors gently but effectively.
Its non-toxic, biodegradable formula encapsulates and
destroys odor causing molecules on contact while time
releasing a fresh fragrance, freshening and deodorizing
the interiors of both lined and unlined ducts.
FRESHDUCT-SPRAY FreshDuct, 397 gram ready-to-use
aerosol can
Bladders block portions of a duct system preventing
recontamination of previously cleaned ducts and to isolate
cleaning areas.
AQ-BL06 Bladder, up to 152.4 mm
FRSHDCT-15OZ FreshDuct, 425 gram concentrate bottle
AQ-BL10 Bladder, 152.4 - 254 mm
Safety Equipment:
AQ-BL16 Bladder, 355.6 - 406.4 mm
AQ-BL20 Bladder, 406.4 - 508 mm
PP-101 Gloves
Portable Inflator:
PP-102-12 Dust Mask (package of twelve)
This device will inflate even the largest bladder
in only seconds.
AQ-ID Portable Inflater, 115 V, 50/60 Hz AC
OXINE
PORTABLE
INFLATOR
FRSHDCT-05 FreshDuct, 19 liter concentrate bottle
Safety goggles, gloves and a dust mask must be worn
during duct cleaning operations. A safety mask must be
worn during the application of Oxine.
PP-100 Safety Goggles
AQ-BL14 Bladder, 254 - 355.6 mm
FRESHDUCT
BLADDER
PP-103 Safety Mask, for use with Oxine
Note: 230 V unit available – call for price.
Oxine®:
GOGGLES
SAFETY MASK
This EPA registered chemical, sprayed into a duct using
the AQ-FG Fogger, kills any residual mold, bacteria,
mildew, viruses, fungi, algae and any other “living”matter.
It is recommended for its low toxicity and safety, and
does not leave an active chemical residue. (A 1 pint bottle
will sanitize a 5-ton system four times.)
AQ-OX-Q Oxine, 1 pint bottle
SPIN DOOR
HOLE CUTTER
DUST MASK
GLOVES
51
Commercial Vacuum Cleaners
DV-SV
Stationary Dry
Continuous Duty Vacuum
DV-CD
Industrial Dry
Continuous Duty Vacuum
VAC-2-HEPA
Industrial Wet/Dry
HEPA Vacuum
DV-E3
Triple Motor
Wet/Dry Vacuum
VAC-CRV
Clean Room Dry
ULPA Vacuum
Single
Single
Twin
Triple
Single
Motor Power:
1.7 kW
2.6 kW
2 kW (Total)
3.4 kW (total)
.7 kW HP
Input Power:
Standard: 8 amps, 230 V,
50/60 Hz AC, three phase
Standard: 10 amps, 230 V,
50/60 Hz AC, three phase
Standard: 13 amps, 115 V,
50/60 Hz AC
Standard: 13 amps, 230 V,
50/60 Hz AC
Standard: 8 amps, 115 V,
50/60 Hz AC
Optional: 4 amps, 460 V,
50/60 Hz, three phase
Optional: 5 amps, 460 V,
50/60 Hz AC, three phase
Optional: 6.5 amps, 230 V,
50/60 Hz
Optional: 22.5 amps, 115 V,
50/60 Hz
Optional: 4 amps, 230 V,
50/60 Hz
4.9 m, 14-4
9.1 m, 14-4
11.3 m, 14-3
9.1 m, 14-3
10.7 m, 14-3
Motor(s):
Power Supply Cord:
•
Air Requirements:
•
•
Air Line:
•
•
•
•
•
•
•
Static Water Lift:
2743.1 mm
2997.2 mm
1676.4 mm
2286 mm
2108.2 mm
Air Displacement:
118 CFM
176 CFM
150 CFM
353 CFM
100 CFM
Filtration:
3 microns polyester pocket
Standard: 3 microns polyester pocket
Optional: 1 micron anti-static pocket
and 0.3 microns HEPA
5 microns paper, 5 microns
paper and 0.3 microns HEPA
Standard: 3 microns polyester pocket
Optional: 1 micron anti-static pocket
and 0.3 microns HEPA
5 microns paper, 2 microns paper
and 0.12 microns ULPA
Tank:
22.7 liter stainless steel
34.1 liter bonderized steel
75.7 liter stainless steel
102.2 liter bonderized steel
19.8 liter stainless steel
22.7 liter
34.1 liter
18.9 liter
102.2 liter
18.9 liter
45.4 liter
98.4 liter
Dry Capacity:
•
Wet Capacity:
•
•
Noise Level:
76 dBA
70 dBA
74 dBA
78 dBA
81 dBA
Special Features:
Continuous duty blower motor
Continuous duty blower motor
HEPA filter
External filter shaker
ULPA filter
External filter shaker
External filter shaker
Disposable collection bag
Roll-out tank
Disposable collection bag
Stationary
Roll-out tank
Dimensions:
584 mm (H) x 355 mm (W) x 711 mm (D)
1143 mm (H) x 483 mm (W) x 914 mm (D) 381 mm diameter tank x 1016 mm (H)
521 mm diameter tank x 1524 mm (H)
1041 mm (H) x 508 mm (W) x 813 mm (D)
Weight:
33 kg
84 kg
82 kg
19.5 kg
52
Stainless steel tool bin
29 kg
Commercial Vacuum Cleaners
VACUUM CLEANERS
DV-EX115H & DV-AV9-EX
Explosion Proof HEPA
Vacuum
DV-AV-EP
Explosion Proof Vacuum
DV-CM
ChipMaster® Vacuum
with Pump-Out
AV-1200-15SS
Air Powered Wet/Dry
Vacuum
GTC-540-20SS
Heavy-Duty Soot/Powder
Vacuum
•
•
Triple
•
Twin
Motor Power:
1.27 kW
•
3.4 kW (total)
•
1.7 kW (Total)
Input Power:
Standard: 11 amps, 115 V,
60 Hz AC
•
Standard: 13 amps, 230 V,
50/60 Hz AC
Optional: 22.5 amps, 115 V,
50/60 Hz
•
Standard: 14 amps, 115 V,
50/60 Hz AC
9.1 m, 14-3
•
Motor(s):
9.1 m
Power Supply Cord:
•
Air Requirements:
•
Minimum 3.4 bar at 35 CFM,
Maximum 6.2 bar at 50 CFM
Air Line:
•
12.7 mm I.D. or larger
Static Water Lift:
1625 mm at 6.2 bar
Air Displacement:
100 CFM at 6.2 bar
Filtration:
Pump Flow:
Tank:
Dry Capacity:
Optional: 7 amps, 230 V,
50/60 Hz
•
Minimum 3.4 bar at 35 CFM,
Maximum 6.2 bar at 50 CFM
•
12.7 mm I.D. or larger
11.3 m, 14-3
•
•
4064 mm at 6.2 bar
2286 mm
4318 mm at 6.2 bar
1270 mm
125 CFM at 6.2 bar
353 CFM
125 CFM at 6.2 bar
270 CFM
1.27 mm metal chip basket and
300 microns polypropylene
15 microns polypropylene and
15 microns dacron
15 microns polypropylene and
15 microns dacron
0.3 micron HEPA and 1 micron
cartridge pre-filter
•
1 micron anti-static pocket
19 liters stainless steel
56.8 liters stainless steel
250 liters bonderized steel
57 liter stainless steel
76 liters stainless steel
19 liters
56.8 liters
83 liter
53 liter
76 liters
•
•
•
•
151 LPM
•
250 liter
38 liter
Noise Level:
70 dBA
74 dBA
78 dBA
84 dBA
78 dBA
Special Features:
Air powered
Air powered
Vertical intake
Air Powered
Polyethylene tank liner
External filter shaker
External filter shaker
Chip collection basket
Roll-out tank
Roll-out tank
External pump
Wet Capacity:
Dimensions:
1016 mm (H) x 483 mm (W) x 533 mm (D) 520 mm diameter tank x 1626 mm (H)
Weight:
32 kg
60 kg
1168 (H) x 559 mm (W) x 1118 mm (D) 381 mm diameter tank x 914 mm (H)
26 kg
100 kg
•
Disposable collection bag
381 mm diameter tank x 1219 (H)
32 kg
53
Triple Motors For High Lift And High Flow
VAC-3A
Do you have a heavy duty mess that other vacuums aren’t quite up to? Three motors in
the VAC-3A generate 1676 mm of static water lift while moving 245 CFM of air. That
translates into high velocity cleaning of large volumes of dirt, debris and liquids pulled
from your shop floor in seconds. You also get a choice of 56.8, 113.5 or 208.2 liter tank
capacity for carting off the really tough jobs. Choose from a wide variety of available
vacuum kits and tools to create the ultimate industrial wet-dry vacuum.
VAC-3A-15SS
Industrial Wet-Dry Vacuum,
including filters, 56.8 liter
stainless steel tank, handles,
wheels and casters
VAC-3A-30*
Industrial Wet-Dry Vacuum,
including filters and 457.2
- 508 mm diameter drum
adapter ring (no drum)
VAC-3A-15SS
Accessories:
VAC-3A-30-DD
Same as VAC-3A-30, plus
113.5 liter bonderized steel
drum, dolly and tool storage
box
VAC-3A-55*
Industrial Wet-Dry Vacuum,
including filters and 558.8
- 609.6 mm diameter drum
adapter ring (no drum)
FEATURES
> Three heavy-duty motors
> Exhaust muffler
> Three tank sizes
> Liquid shut-off
> Metal deflector
> Reusable filters
> 38.1 mm or 50.8 mm hoses
VAC-3A-30-DD
VAC-KIT-9 38.1 mm Industrial Vacuum
Accessory Kit: 305 m Neoprene Wire
Reinforced Hose, 1371.6 mm Double Bend
Wand, 1371.6 mm Extension Tube, 1.5 m
Extension Tube, 355.6 mm Nylon Floor Brush,
355.6 mm Squeegee Floor Tool, 355.6 mm
Rough Surface Fiber Shod Floor Tool, 203.2
mm Wall and Overhead Brush, and 685.8 mm
Steel Crevice Tool
Dump Valve (Factory Installed):
DDV-100M Full Flow Ball Valve, 25.4 mm
VAC-3A-55-DD
Same as VAC-3A-30, plus
208.2 liter bonderized steel
drum, dolly and tool storage
box
DDV-E90 Elbow, 90°
DDV-675 Garden Hose Connector
VAC-3A-55-DD
Specifications
VAC-3A
Motor Power:
Input Power:
Power Supply Cord:
Static Water Lift:
Air Displacement:
Filtration:
Tank/Drum:
Dry Capacity:
Wet Capacity:
Noise Level:
Dimensions:
Weight:
Triple
3 kW (total)
13,5 amps, 230 V, 50/60 Hz AC
2,1 m
459 m3/h
15 micron polypropylene and 15 microns dacron
57 liters
53 liters
38 liters
78 dBA
tank: 380 mm (D) x 910 mm (H)
32 kg
54
VAC-KIT-9
*Note: Fits any standard drum
113.5 liter or 208.2 liter depending on model.
Note: Vacuums do not include accessories.
Order VAC-KIT-9 or individual accessories
Storage Pouch:
VAC-TOOL-TOTE Durabond Tool Storage Pouch
Replacement Filters:
GTC-175 Polypropylene Filter, 15 microns
GTC-176 Dacron Filter, 15 microns
VAC-P-51 Water Guard Filter
PRESSURE WASHER
GPW-1300
This GPW-1300 heavy-duty pressure washer delivers tons of features to make you more
productive. One look at this rugged pressure washer and you can see that it’s been
engineered to please even in tough environments. Five spray nozzles with rack storage,
7.62 meter of flexible spray hose neatly wrapped around its on-board hose reel, a
rugged dolly and 1,300-PSI of pressure allow you to tackle a variety of cleaning tasks.
GPW-1300-60
Heavy-Duty pressure washer including 7.62 m high pressure hose, hose reel, two
piece 914.4 mm wand, spray gun, 5 quick connect spray nozzles, nozzle rack and
2-wheel dolly
Recommended:
APC-100 All Purpose Cleaner, case of four 3.8 liter bottles
FEATURES
> Five Color-coded quick connect nozzles
> On-board nozzle rack and hose reel
> 7.62 m high pressure hose
> Mobile 2-wheel dolly
> Auto shut off for extended pump life
Specifications
GPW-1300
Motor Power:
Input Power:
Power Supply Cord:
Water Requirements:
Output Water Pressure:
Output Water Flow:
Pump:
Dimensions:
Weight:
1.38 kW
115 V, 60 amps and 230 V, 50 amps
14-3 GCFI
minimum 1.7 BAR
89 BAR
6.13 LPM
Triplex Piston
91.4 cm (H) x 43.7 cm (W) x 40.6 cm (D)
32.6 kg
55
Mold Remediation
Mold
RemediationEquipment
Equipment
MP-50
The MP-50 MoldPro™ Sprayer provides an easy, convenient method for
applying MoldTek chemicals. The unit features a 12 V DC rechargeable
battery and large 19 liter spray tank for remote operations.
Specifications
MP-50
Input Power:
Recharge Power:
7 Amps, 12 V, DC Rechargeable Battery
0,1 Amps, 115 V, 60 Hz AC
Optional: 0,05 Amps, 230 V, 50 Hz
19 Liters
6,6 BAR
1,9 LPM
Intermittent Duty Cycle
660 mm High x 480 mm Wide x
200 mm Deep
12 kg
Chemical Tank:
Output Water Pressure:
Output Water Flow:
Pump:
Dimensions:
Weight:
56
MOLD REMEDIATION
Mold Remediation Chemicals
MOLDTEK™, MOLDTEK-XC AND MOLDTEK-MT
Mold and mildew are not only unsightly and unpleasant to smell. They are also a serious health concern for you, your staff and your tenants.
Remove and prevent mold and mildew with these proven and effective MoldTek formulations. MoldTek is fast – it's pre-mixed and ready to
use. MoldTek-XC is a concentrate – perfect for big jobs or where storage is at a premium. MoldTek-MT inhibits future mold growth. Just one
application extends the effectiveness of your cleaning and helps prevent mold's return.
MoldTek Mold and Mildew Remover:
MoldTek combines the germ killing ability
of a disinfectant with a cleaning agent to
remove harmful mold and mildew. It disinfects,
cleans and deodorizes hard, non-porous,
inanimate environmental surfaces, such as walls
and floors, where microbial contamination may
accumulate. It is mild, without any damaging
side effects to equipment and surfaces. Its
light citrus scent dissipates rapidly making it
a pleasure to use. It will not stain or blemish
most fabrics.
MOLDTEK-01 MoldTek ready-to-use
mold and mildew remover, 3,8 liter bottle
MOLDTEK-4X1 MoldTek ready-to-use
mold and mildew remover, case of four
3,8 liter bottles
MOLDTEK-32OZ MoldTek ready-to-use
mold and mildew remover, 946 ml
spray bottle
MOLDTEK-32OZ-CS MoldTek ready-to-use
mold and mildew remover, case of twelve
946 ml spray bottles
Note: 19 liter bottles and 208 liter drums available.
D
L
O
M T
FAC
MoldTek-XC Mold and Mildew Remover:
MoldTek-XC is a concentrated one step
disinfectant that is effective against a broad
spectrum of bacteria and kills mold and mildew
on contact. This is a no rinse solution that
disinfects, cleans and deodorizes in
one labor saving step. It’s concentrated formula
delivers superior performance at a lower end-use
cost. 1 gallon of concentrate will produce
64 gallons of finished product. Moisture from
floods, broken pipes, or even uncontrolled
humidity can result in mold contaminated indoor
spaces. MoldTek-XC can be used to disinfect
surfaces encountered in every phase of mold
remediation. The concentrated formula means
you pay only for the powerful cleaning agents,
not the water required for the final solution.
The finished product can be wiped, mopped
or sprayed onto the surface to be cleaned.
MOLDTEK-XC-01 MoldTek-XC concentrate
mold and mildew remover, 3,8 liter bottle
MOLDTEK-XC-4X1 MoldTek-XC concentrate
mold and mildew remover, case of four
3,8 liter bottles
MoldTek-MT Mold and Mildew Inhibiter:
MoldTek-MT is an antimicrobial treatment
that controls and inhibits the growth of
microorganisms, such bacteria, and fungi and
mold, on floors and walls. Damp musty odors
caused by microbial contamination from
excessive moisture, high levels of humidity,
and flood and water damage is a serious
problem in many living and working
environments. Unsightly black mold
streaks on walls and floors are all too often
en-countered in all types of buildings today.
Microorganisms are everywhere causing
odors, damaging surfaces and secreting
toxic byproducts to living and working areas.
MoldTek-MT is specially formulated not only
to control the growth of microorganisms on
floors and walls, but its residual effect inhibits
the re-growth of microbes for months.
MOLDTEK-MT-01 MoldTek-MT ready-to-use
mold and mildew inhibiter, 3,8 liter bottle
MOLDTEK-MT-5 MoldTek-MT ready-to-use
mold and mildew inhibiter, 19 liter bottle
MOLDTEK-MT-4X1 MoldTek-MT ready-to-use
mold and mildew inhibiter, case of four
3,8 liter bottles
Many molds are capable of producing compounds which are toxic to other organisms,
including people. More than 200 mycotoxins have been identified from common mold.
One of these, Aflatoxin B1 is one of the most potent carcinogens known. It has been
positively linked to liver cancer and is a suspected cause of lung cancer.
57
®
What’s Inside...
METRIC TO U.S. CONVERSION FORMULAS
Coil Cleaners
2 to 5
Cooling Towner Cleaners
6 to 8
To Convert:
Tube Cleaners
9 to 26
Chemical Descalers
23 to 24
Firetube Boiler Cleaners
28 to 33
Surface Condenser Cleaners
34 to 40
Hydraulic Hose Cleaners
441 to 43
Test And Inspection Equipment
44 to 46
Duct Cleaners
47 to 51
Vacuums And Accessories
52 to 54
Pressure Washers
55
Mold Remediation
56 to 57
Multiply by:
Linear Measures
Millimeter(mm) to Inch (in)
Centimeter (cm) to Inch (in)
Meter (m) to Foot (ft)
0,039
0,394
3,281
Square Measures
Square Centimeter (cm2) to Square Inch (sq in)
Square Meter (m2) to Square Foot (sq ft)
0,155
10,764
Measures of Volume
Cubic Centimeter (cm3) to Cubic Inch (cu in)
Cubic Meter (m3) to Cubic Foot (sq ft)
Liter (l) to U.S. Gallon (g)
0,061
35,315
0,264
Weight
Kilogram (kg) to Pound (lb)
2,205
Pressure
BAR a PSI
14,504
Power
Kilowatt (kW) to Horsepower (HP)
Temperature
Celsius (°C) to Fahrenheit (°F)
DISTRIBUTED FOR:
www.goodwaybenelux.nl
Weldaad 9A
5431 SM Cuijk
NETHERLANDS
Tel: (+31) (0) 485 - 316 440
Fax: (+31) (0) 485 - 330 403
info@goodwaybenelux.nl
1.341
Multiply by: Then Add:
1,8
32
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising