CLAWS Brochure

CLAWS Brochure
access control
Flush Mount,
Independent Drive
Surface Mount,
Independent Drive
Give your traffic barrier CLAWS - an effective deterrent for
high-volume access control. Designed to provide a compelling
reason for would-be criminals to reconsider their approach;
CLAWS are constructed to take a beating but never miss a
beat of their own.
CLAWS are available in four different configurations.
These can be generally divided into two types of categories:
Flush Mount models for installations that are flush with the
roadway surface; and Surface Mount models for installations
that are mounted above the roadway surface.
The Flush Mount models are ideal for installations that
require seamless access control for smooth-flowing traffic,
whereas the Surface Mount models are mounted above the
general surface of the roadway and create a traffic calming
bump, slowing traffic for a safer access control point.
Both the Flush Mount and Surface Mount models are
available in either Direct Drive which utilises the SECTOR
barrier’s drive mechanism, or Independent Drive models
which have their own drive mechanisms and controllers.
Features and benefits
 Standard modular system ensures good stock
 Modular construction allows
for components to be
transported and
installed with ease
 Adds high security to
traffic barrier access
controlled entrances and exits
 Robust construction built to withstand impacts from vehicles
 High-torque DC motor for greater reliability and responsive
 Selectable High-Security or Safety Modes
 Reliable battery backup ensuring continued service even
when the lights go out
 Easy to maintain saving you time and money
 Traffic Yellow coloured spikes for high visibility and
increased safety
 Four different configurations to ensure a model for just
about any application
 All moving parts are removable for easy maintenance
 External limit switches provide for failsafe operation
 Indirect drive models can operate independently of traffic
barrier units
 All-weather construction
 Easy to change orientation depending on traffic flow
 Supports output for robot interface
 Variable modes and adjustable speed of operation to suit
the requirements of just about any installation
 Can be mounted in any position, even away from the traffic
 CLAWS’ spikes can move independently of the SECTOR -
such as lower before the barrier raises, and raise only once
the barrier has lowered
 Uses standard SECTOR controller and gearbox allowing for
reduced spares inventory
Applies to Independent Drive Model only
Technical specifications
Direct Drive
Indirect Drive
Input voltage
Motor voltage
Motor power supply
12V DC
12V DC
Battery driven
- 2A charger
Spikes modules available lengths
Spikes raise/lower time
Daily operations - max
Daily operations - mains
specification Main chassis
Spike material
1 metre and 1.5 metre
As per co-installed
50% of co-installed
SECTOR original
50% of co-installed
SECTOR original
As per co-installed
Hot dip galvanised Mild Steel
85mm Mild Steel, electroplated and powder-coated
Trench cover load
bearing capacity
Onboard receiver
1.2 sec
As per co-installed
Two tons per wheel
CentSys code-hopping,
multichannel, 433MHz
with 500 remote control
button storage capacity
Requires external battery, charger and weatherproof controller housing if unit
is installed as a standalone device
7Ah battery (can be upgraded for longer power failure autonomy)
E&OE Centurion Systems (Pty) Ltd reserves the right to change any product without prior notice
Centurion Systems (Pty) Ltd • South Africa
Contact number: +27 11 699 2400
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF