General Manual 07/2013
P10M
TECHNICAL DATA SHEET FOR
P10M PROOFER/HOLDING CABINET
Half Size Manual / Electric
STANDARD FEATURES
• Dual function Proofer and Holding Cabinet
• Designed for individual use or system installed with
Turbofan E33D Convection Ovens
• 10 12” x 20” steam pan capacity
• 10 half size sheet pan capacity
•27/8”/ 74mm tray spacing
• Compact 24” / 610mm width
• 110-120V plug-in
• 15A NEMA 5-15P cordset fitted
• Full double skin construction
• Auto water fill system with optional integrated water filter kit
• Continuous door seal
• Off / Proof / Hold mode selection
• Low velocity circulation fan system
• Mechanical thermostat
• Humidity level control
• Dual halogen cabinet interior lamps
• Cabinet temperature display thermometer
• 4 dia. 3” / 76mm castors with 2 front castors dual wheel
and swivel lock, 2 rigid rear castors
• 100% recyclable packaging
ACCESSORIES
• Optional 3M Cuno water filter kit complete with cartridge
and connection fittings
P10M
Unit shall be a Moffat electrically heated Turbofan Proofer and Holding Cabinet ETL Listed and NSF-4 listed. The proofer and holding cabinet shall have double skin
construction with stainless steel interior and exterior sides, front and top. Unit shall have capacity for up to 10 half size sheet pans or 10 12” x 20” steam pans. A
single speed fan shall gently and evenly circulate air around the cabinet. Cabinet shall be controlled by a mechanical thermostat and humidity via a control of the water
tank. A thermometer shall indicate the cabinet temperature. Proofer and holding cabinet shall be mounted on castors, with two rigid castors at rear and two swivel
castors dual swivel and wheel lock and front. Proofer and Holding cabinet shall operate independently or in combination with Moffat Turbofan model E33D5 Convection
Oven. Proofer and Holding Cabinets shall be fitted with NEMA 5-15P cordsets. Unit shall be supplied in 100% recyclable shipping packaging.
P10M
P10M Half Size Manual / Electric
Proofer/Holding Cabinet
www.moffat.com
CONSTRUCTION
304 stainless steel interior cabinet
Stainless steel front, sides and top exterior
Stainless steel interior side racks
Stainless steel frame side hinged door
0.2” / 5mm thick door glass
Stainless steel control panel
Aluminized coated steel base and rear panels
U.S.A.
Moffat Inc
3765 Champion Boulevard
Winston-Salem
North Carolina 27105
CONTROLS
Off / Proof / Holding mode selector switch.
Mechanical thermostat 65-185°F / 20-85°C
Air heating ON control panel indicator
Humidity level control
Humidity tank ON control panel indicator
Cabinet temperature thermometer
Auto-fill water system standard
Ph Toll Free 1-800-551 8795
Ph 336-661 0257
Fax 336-661 9546
Email [email protected]
www.moffat.com
CLEANING
Stainless steel top and side exterior panels
Stainless steel interior chamber
Easy access to all interior surfaces
Fully removable stainless steel rack support
Removable humidity water tank (no tools)
SPECIFICATIONS
Electrical Requirements
110-120V, 50/60Hz, 1-phase, 1.45kW, 11.6A
NEMA 5-15P cordset fitted
Water Requirements (optional)
Cold water connection ¾” GHT male
80psi maximum inlet pressure / 20psi minimum inlet pressure
External Dimensions
Width 24” / 610mm
Height 40” / 1015mm including dia. 3” / 76mm castors
Depth263/4” / 680mm
Nett Weight
171 lbs / 77.5kg
Packing Data
210lbs / 95.3kg
22.6 ft³ / 0.64m³
Width 253/4” / 655mm
Height
46½” / 1180mm
Depth325/8” / 830mm
INSTALLATION CLEARANCES
Rear
1” / 25mm
LH Side
0” / 0mm
RH Side
0” / 0mm
Manufactured by:
Moffat Limited
16 Osborne Street PO Box 10-001
Christchurch 8081 New Zealand
CLEARANCE FROM SOURCES OF HEAT
A minimum distance of 12” / 300mm from the appliance sides
is required
610mm/ 24"
ISO9001
680mm/26 3/4"
Quality
Management
Standard
55mm/2 1/8"
Designed and manufactured by
WATERI NLET
910mm/ 35 7/8"
400mm/153/4 "
457mm /18"
ELECTRICAL
ENTRY
120mm/ 43/4"
1015mm /4 0"
40mm /1 5/8"
53mm /21/8"
ISO9001
All Turbofan products are designed and
manufactured by Moffat using the
internationally recognised ISO9001
quality management system, covering
design, manufacture and final inspection,
ensuring consistent high quality at all times.
In line with policy to continually develop
and improve its products, Moffat Limited
reserves the right to change specifications
and design without notice.
© Copyright Moffat Ltd
Moffat 1343 / 7.13
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement