EM POE151Sv3.0
1. Package Content
Thank you for purchasing PLANET IEEE 802.3af Power
over Ethernet Splitter, POE-151S. Terms of “802.3af PoE
Splitter” in following section of this User’s Manual means
the POE-151S.
Upon open the box of the IEEE 802.3af Power over Ethernet
Splitter and carefully unpack it. The box should contain the
following items:
●
●
●
●
The Power over Ethernet Splitter x 1
User’s Manual x 1
15cm UTP straight network cable x 1
DC Plug cable x 2
If any of these are missing or damaged, please contact your
dealer immediately, if possible, retain the carton including
the original packing material, and use them against to
repack the product in case there is a need to return it to us
for repair.
2. Product Features
□ Complies with IEEE 802.3af, Power over Ethernet, IEEE
802.3/802.3u 10/100Base-TX Ethernet standard
□ Splits the 48V DC power over RJ-45 Ethernet cable into
different DC output
□ LED indicators power input indication
□ Distance up to 100 meters
□ Adjustable two different output voltage options (5V/2A,
12V/1A) to fit various devices
□ Auto-detect of POE IEEE 802.3af equipment, protect
devices from being damaged by incorrect installation
□ Works with EIA568, category 5, 4-pair cables for 10Base-T
or 100Base-TX
3. Product Specification
Model
POE-151S
Standard
IEEE 802.3af, IEEE 802.3, IEEE
802.3u, 10/100Base-TX
Ethernet Connector
2 x RJ-45
(1 for Data + DC in, 1 for Data out)
Data Rate
10/100Mbps
(vary on Ethernet device attached)
DIP Switch
5V DC / 12V DC output voltage
Number of Device can be
powered
1
Ethernet Cable
TIA/EIA-568, Category 5/5e cable
LED Indicator
1 x PoE ready/in-use
Operating Environment
0~50 Degree C, 5%~90%RH
Storage Environment
-10~70 Degree C, 5%~90%RH
Dimension (W x D x H)
73 x 55 x 24 mm
Weight
50g
Emission
FCC Class B, CE mark
–1–
–2–
4. Product Outlook
5. Installation
Figure 1 shows a front panel of 802.3af PoE Splitter.
If your network environment is very difficult to find a
power socket for your AC-DC Adapter of networked device,
the POE-151S provide DC power for this Ethernet Device
conveniently and easily.
The POE-151S separates the power out and provide two
kind of DC power output through its DIP switch and its
voltage and current shown as below:
- 5V DC / 2A
- 12V DC / 1A
Figure 1: POE-151S Outlook
LED Indicators
LED
Color
Function
PoE ready
/ in-use
Green
Lights to indicate the port is providing
48VDC in-line power.
The default value will be set on 5V.
Hint
Please check the power requirement of the
device that is going to get the power from
POE-151S. If the power requirement is higher
than POE-151S can supply, current overload
will shutdown the POE-151S itself. Thus, it will
shutdown your device as well.
POE-151 and POE-151S can be installed in pair. However,
use of third-party device is allowed if the device complied
with IEEE 802.3af standard.
–3–
–4–
Hardware Installation
Connect with 802.3af devices
1.Connect network cable from “Ethernet+DC” of POE-151
to “Ethernet+DC” of POE-151S. The POE LED of POE151S/POE-151 will start to flash continuously.
The POE-151S also provide the alternative to make the
non IEEE 802.3af devices the possibility to connect with an
IEEE 802.3af in-line power device like Power over Ethernet
Switch, the figure is as below.
100 meters
100 meters
802.3af in-line power Switch
Switch
Data
Power
Data
Power
Data
PoE
DC
POE-151
POE-151S
Power
Data
Power
Data
PoE
DC
Wireless AP
DC
Power
POE-151S
Wireless AP
100Base-TX UTP
100Base-TX UTP
Warning
DC
Power Line (DC)
PoE
100Base-TX UTP with PoE
The POE-151S only accept IEEE 802.3af
equipment, other in-line power device may
cause the POE-151S malfunction.
2.Connect the UTP cable from “Ethernet” of POE-151S to
the RJ-45 port of remote device.
3.Connect proper DC plug from “DC OUT” of POE-151S to
remote device.
Caution
Please ensure the output voltage is correct for
remote device. Otherwise, it will damage your
remote device.
Hint
DC
Power Line (DC)
PoE
100Base-TX UTP with PoE
With IEEE 802.3af standard; the POE-151S also
can co-work with IEEE 802.3af end-span switch
that feeding power over pin 1, 2, and 3, 6.
Customer Support
Thank you for purchase PLANET products. You can browse
PLANET Web site FAQ resource to check if it could solve you
issue. If not, please contact PLANET switch support team.
PLANET online FAQ :
http://www.planet.com.tw/en/support/faq.php?type=2
Switch support team mail address :
[email protected]
4.Power on the remote device and the LED indicator on
POE-151S will remains on.
Copyright © PLANET Technology Corp. 2009.
Contents subject to revision without prior notice.
PLANET is a registered trademark of PLANET Technology Corp. All other
trademarks belong to their respective owners.
–5–
–6–
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement