2013.2 - Release Notes
Vivado Design Suite
User Guide
Release Notes, Installation,
and Licensing
UG973 (v2013.2) June 19, 2013
Notice of Disclaimer
The information disclosed to you hereunder (the “Materials”) is provided solely for the selection and use of Xilinx products. To the maximum
extent permitted by applicable law: (1) Materials are made available "AS IS" and with all faults, Xilinx hereby DISCLAIMS ALL WARRANTIES
AND CONDITIONS, EXPRESS, IMPLIED, OR STATUTORY, INCLUDING BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY,
NON-INFRINGEMENT, OR FITNESS FOR ANY PARTICULAR PURPOSE; and (2) Xilinx shall not be liable (whether in contract or tort, including
negligence, or under any other theory of liability) for any loss or damage of any kind or nature related to, arising under, or in connection with,
the Materials (including your use of the Materials), including for any direct, indirect, special, incidental, or consequential loss or damage
(including loss of data, profits, goodwill, or any type of loss or damage suffered as a result of any action brought by a third party) even if such
damage or loss was reasonably foreseeable or Xilinx had been advised of the possibility of the same. Xilinx assumes no obligation to correct
any errors contained in the Materials or to notify you of updates to the Materials or to product specifications. You may not reproduce,
modify, distribute, or publicly display the Materials without prior written consent. Certain products are subject to the terms and conditions
of the Limited Warranties which can be viewed at http://www.xilinx.com/warranty.htm; IP cores may be subject to warranty and support
terms contained in a license issued to you by Xilinx. Xilinx products are not designed or intended to be fail-safe or for use in any application
requiring fail-safe performance; you assume sole risk and liability for use of Xilinx products in Critical Applications:
http://www.xilinx.com/warranty.htm#critapps.
© Copyright 2013 Xilinx, Inc. Xilinx, the Xilinx logo, Artix, ISE, Kintex, Spartan, Virtex, Vivado, Zynq, and other designated brands included
herein are trademarks of Xilinx in the United States and other countries. ARM® is a registered trademark of ARM in the EU and other
countries. CPRI is a trademark of Siemens AG. MATLAB and Simulink are registered trademarks of The MathWorks, Inc. PCI, PCIe and PCI
Express are trademarks of PCI-SIG and used under license. All other trademarks are the property of their respective owners.
Revision History
The following table shows the revision history for this document.
Date
Version
Revision
06/19/2013
2013.2
Added details to the Release Notes 2013.2 in Chapter 1, and Older Release Notes in
Chapter 6.
04/15/2013
2013.1
Added details to Vivado XDC Changes in Chapter 1, and noted the use of Vivado
synthesis for Xilinx IP in Compatible Third-Party Tools in Chapter 2.
03/20/2013
2013.1
Initial Xilinx release.
Vivado Design Suite 2013 Release Notes
UG973 (v2013.2) June 19, 2013
www.xilinx.com
2
Table of Contents
Revision History . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Chapter 1: Release Notes 2013.2
What’s New . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Important Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Known Issues . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Chapter 2: Architecture Support and Requirements
Operating Systems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Architectures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Compatible Third-Party Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
System Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
12
12
13
14
Chapter 3: Download and Installation
Downloading the Vivado Design Suite Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Installing the Vivado Design Suite Tools: Overview for All Platforms . . . . . . . . . . . . . . . . . . . . . . .
Platform-Specific Installation Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Installation Flow. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
USB FLEXid Dongle Driver Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Network Installations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Obtaining Quarterly Releases . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Uninstalling the Vivado Design Suite Tool . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
17
18
19
19
24
25
27
28
Chapter 4: WebTalk
WebTalk Participation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Setting WebTalk Install Preference . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Setting WebTalk User Preferences . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Checking WebTalk Install and User Preferences . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Types of Data Collected . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Transmission of Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
29
30
32
33
33
34
Chapter 5: Obtaining and Managing a License
Accessing the Product Licensing Site . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Vivado Design Suite 2013 Release Notes
UG973 (v2013.2) June 19, 2013
www.xilinx.com
3
Changing Xilinx User Account Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Product Licensing Accounts. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
User Types and Actions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Creating a License Key File . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Managing License Key Files . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Legacy Licensing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Understanding Your Tool and IP Orders. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Managing User Access to Product Licensing Account . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Installing Your License Key File . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
36
39
40
41
47
51
52
53
56
Appendix A: Additional Resources
Xilinx Resources . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Solution Centers. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Xilinx Documentation Navigator. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Licenses and End User License Agreements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
References . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Vivado Design Suite 2013 Release Notes
UG973 (v2013.2) June 19, 2013
www.xilinx.com
70
70
70
71
71
4
Chapter 1
Release Notes 2013.2
What’s New
Vivado® Design Suite 2013.2 accelerates both time to integration and system-level design.
System-level designers benefit from public access to the Vivado IP Integrator a device and
platform aware interactive, graphical environment that provides IP-aware automated IP
subsystem generation. Vivado High Level Synthesis and System Generator for DSP are now
also integrated into Vivado IP integrator providing a comprehensive development
environment for All Programmable FPGA and SoCs. Also, get through your integration work
faster with improved run-times and new end-to-end debug capabilities.
Device Support
The following devices are production ready:
•
Zynq®-7000 devices
°
•
Defense Grade Zynq-7000Q
°
•
VX690T and VX980T
Defense-Grade Artix-7Q
°
•
7Z010, 7Z020, and 7Z030
Defense-Grade Virtex®-7Q
°
•
7Z010, 7Z020, and 7Z100
A100T and A200T
XA Artix®-7
°
A100T
Vivado Design Suite 2013 Release Notes
UG973 (v2013.2) June 19, 2013
www.xilinx.com
5
What’s New
Vivado System Edition Products
Vivado High-Level Synthesis
•
•
Video libraries with OpenCV interfaces are enhanced with support for 12 additional
functions.
°
hls::CornerHarris, hls::EqualizeHist, hls::FASTX, hls::GaussianBlur, hls::Harris
°
hls::HoughLines2, hls::Integral, hls::InitUndistortRectifyMap, hls::PaintMask
°
hls::Remap, hls::Resize, hls::Sobel
Adders can now be targeted for implementation in a DSP48 directly from Vivado HLS.
°
•
Previously, the implementation of adders or subtractors in a DSP48 was left to RTL
Synthesis. With the new core AddSub_DSP users can now specify, inside Vivado HLS,
that the addition or subtraction be performed using a DSP48.
The Xilinx FFT core can now be instantiated directly into the C/C++ source code. This
feature is Beta. Contact your local Xilinx FAE for details on how to use this feature.
System Generator for DSP
•
Tools Integration
°
°
•
Introducing Vivado® IP Integrator support in System Generator for DSP.
-
Model packaged as an IP with support for gateway inputs and outputs to be
packaged as interfaces or raw ports.
-
Capability to specify AXI4-Stream interface in Gateway blocks and to infer
AXI4-Lite and AXI4-Stream interfaces from named Gateway blocks.
-
System Generator generates example RTL Vivado project and example IP
Integrator block diagram to enable easy evaluation of packaged IP.
-
New System Generator IP Integrator integration tutorial available with System
Generator tutorials.
Introducing support for MATLAB® and Simulink® release R2013a.
Blockset Enhancements
°
Support added for FIR Compiler v7.1 with introduction of area, speed and custom
optimization options.
°
Model upgrade flow now includes port and parameter checks to the HTML report.
°
Enhanced caching to speedup subsequent model compilation.
Vivado Design Suite 2013 Release Notes
UG973 (v2013.2) June 19, 2013
www.xilinx.com
6
What’s New
Vivado Design Edition Tools
Interactive Design Environment
•
•
View file compile order in the Sources Compile Order tab
°
Select between Synthesis, Implementation, and Simulation
°
Reflects file order from report_compile_order command
Manually reset message counts
Power
•
Support for Zynq-7000 - Includes the processor subsystem and the programmable
logic.
•
Modelling of the power down mode for XADC blocks in 7 series devices.
Vivado IP Integrator
•
Full production release. Now available with every seat of Vivado Design Suite
•
Automated IP upgrade flow for migrating a design to the latest IP version
•
Cross-probing is now enabled on IP integrator generated errors and warnings
•
Integration with System Generator generated IP
•
Synthesis run times for IP integrator generated designs are up to 4x faster
•
ECC (error-correcting code) is now supported in MicroBlaze™ within IP integrator
Vivado IP Catalog
•
Bottom-up synthesis enabled in project based designs to reduce synthesis run times
°
•
•
IP that have not changed will not be resynthesized
Significant enhancements to the “Manage IP” Flow
°
Creation and management of IP simplified. An IP project is automatically created to
manage the netlisting of IP.
°
Easy generation of a synthesized design checkpoint (DCP) for IP to enable IP use in
blackbox flows using third party synthesis tools
°
DCP for IP and the Verilog stub files are now co-located with the XCI File for the IP
°
Scripts are delivered for compiling IP simulation sources for behavioral simulation
using third party simulators
Improved handling of IP Constraints
Vivado Design Suite 2013 Release Notes
UG973 (v2013.2) June 19, 2013
www.xilinx.com
7
What’s New
°
IP DCP contains the netlist and constraints for the IP
°
Constraints are scoped automatically
Vivado Simulation
•
Run time improvement
°
•
Enabled user control to choose compilation rerun in Vivado simulator. See the
Vivado Design Suite User Guide: Logic Simulation (UG900).
Improved post processing automation for simulation
°
Post TCL hook capability added. See the Vivado Design Suite User Guide: Logic
Simulation (UG900).
Static Timing Analysis
•
Rename tool-generated clocks: create_generated_clock -name option
•
Create clock constraints interactively from clock network reports
°
New right-click menus
°
Create clocks and generated clocks
Vivado I/O Planner
•
Increased SSN analysis resolution
°
Enabled temperature grade based SSN analysis
Vivado Debug
•
•
•
Device support:
°
Added support for Zynq 7Z100
°
Added support for 7 Series XQ package & speed grade changes
°
Added support for Virtex®-7 HT General ES devices (7VHT580T and 7VHT870T)
Target Communication Framework (TCF) agent (hw_server):
°
Added Xilinx Platform Cable USB JTAG cable support
°
Auto start of TCF agent (hw_server)
°
Auto discovery of JTAG cables
Serial I/O Debug:
°
•
Vivado serial I/O analyzer support for IBERT 7 Series GTZ 3.0
Added support for debugging multiple FPGAs in the same JTAG chain
Vivado Design Suite 2013 Release Notes
UG973 (v2013.2) June 19, 2013
www.xilinx.com
8
What’s New
Tandem Configuration for Xilinx PCIe IP
Tandem Configuration can be used to meet the fast enumeration requirements for PCI™
Express. A two stage bitstream is delivered to the FPGA. The first stage configures the Xilinx
PCIe® IP and all design elements to allow this IP to independently function as quickly as
possible. Stage two completes the device configuration while the PCIe link remains
functional. Two variations are available: Tandem PROM loads both stages from the same
flash device, and Tandem PCIe loads stage two over the PCIe link. All PCIe configurations
are supported up to X8Gen3.
•
•
•
Tandem Configuration is now released with production status, for both Tandem PROM
and Tandem PCIe. Devices with this status include:
°
XC7K325T-FFG900
°
XC7VX485T-FFG1761 (PCIE X1Y0 location required)
°
XC7VX690T-FFG1761 (PCIE X0Y1 location required)
Tandem Configuration is available as beta for additional devices, for both Tandem
PROM and Tandem PCIe. Hardware testing for these devices has been limited.
°
XC7K160T-FFG676
°
XC7K410T-FFG676
°
XC7VX415T-FFG1158 (PCIE X0Y0 location recommended)
°
XC7VX550T-FFG1158 (PCIE X0Y1 location recommended)
For more information, see PG054 (version 2.1) for Gen2 PCIe IP, or PG023 (version 2.1)
for Gen3 PCIe IP.
Vivado Design Suite 2013 Release Notes
UG973 (v2013.2) June 19, 2013
www.xilinx.com
9
Important Information
Important Information
Migrating Vivado Designs from Vivado Design Suite 2013.1 to
2013.2
Table 1-1:
Specifics for Migrating Vivado Designs to Vivado Design Suite 2013.2
Change in 2013.2
Impact on Designs
Resolution
Xilinx 2013.1 IP: Constraints are
processed in a different order by
the 2013.2 tools.
• In 2013.2, by default, IP
constraints are processed
before user constraints,
instead of after as in 2013.1.
• In 2013.2, the _clocks.xdc file
no longer contains clock
definitions. Now it contains
clock-dependent constraints.
Also, the file is now processed
after the user constraints by
default, instead of before.
• Timing failures, critical
warnings, or other issues might
occur.
Regenerate Xilinx IP in 2013.2.
Managed IP flow now
automatically creates an IP
project.
• IP directories from 2013.1
sessions are not automatically
populated in the 2013.2 IP
project.
Must manually read the IP .xci
through read_ip command at the
Tcl Console of the IP Project
session.
Updates to Existing IP
•
AXI Ethernet
°
•
AXI Ethernet Lite
°
•
Zynq-7000 in production
10G Ethernet MAC, RXAUI, XAUI
°
•
Virtex-7, Artix-7, Zynq-7000 in production
GMII2RGMII
°
•
Virtex-7 in production
Tri-Mode Ethernet MAC
°
•
New IEEE 1588 hardware timestamping for 1-step and 2-step
Virtex-7, Zynq-7000 in production
PCI32 and PCI64
°
Artix-7 in production
Vivado Design Suite 2013 Release Notes
UG973 (v2013.2) June 19, 2013
www.xilinx.com
10
Known Issues
•
For a detailed list of Xilinx IP Cores, see the IP Release Notes Guide (XTP025) [Ref 2]
Known Issues
Vivado™ Design Suite Tools Known Issues can be found at Answer Record 55120
Vivado Design Suite 2013 Release Notes
UG973 (v2013.2) June 19, 2013
www.xilinx.com
11
Chapter 2
Architecture Support and Requirements
Operating Systems
Xilinx only supports the following operating systems on x86 and x86-64 processor
architectures.
Microsoft Windows Support
•
Windows XP Professional (32-bit and 64-bit), English/Japanese
•
Windows 7 Professional (32-bit and 64-bit), English/Japanese
•
Windows Server 2008 (64-bit)
Linux Support
•
Red Hat Enterprise Workstation 5 (32-bit and 64-bit)
•
Red Hat Enterprise Workstation 6 (32-bit and 64-bit)
•
SUSE Linux Enterprise 11 (32-bit and 64-bit)
Architectures
The following table lists architecture support for commercial products in the Vivado™
Design Suite WebPACK™ tool vs. all other Vivado Design Suite editions. For
non-commercial support:
•
All Xilinx® Automotive devices are supported in the Vivado Design Suite WebPACK
tool.
•
Xilinx Defense-Grade FPGA devices are supported where their equivalent commercial
part sizes are supported.
Vivado Design Suite 2013 Release Notes
UG973 (v2013.2) June 19, 2013
www.xilinx.com
12
Compatible Third-Party Tools
Table 2-1:
Architecture Support
Vivado Design Suite
(All Other Editions)
Vivado WebPACK Tool
Zynq™ Device
Zynq-7000 Device (Early Access)
• XC7Z010, XC7Z020, XC7Z030
Zynq-7000 Device (Early Access)
• All
Virtex® FPGA
Virtex-7 FPGA
• None
Virtex-7 FPGA
• All
Kintex™ FPGA
Kintex-7 FPGA
• XC7K70T, XC7K160T
Kintex-7 FPGA
• All
Artix™ FPGA
Artix-7 FPGA
• XC7A100T, XC7A200T
Artix-7 FPGA
• All
Compatible Third-Party Tools
Table 2-2:
Compatible Third-Party Tools
Red Hat
Linux
Red Hat
Linux-64
SUSE
Linux
Mentor Graphics
ModelSim SE/DE
(10.1b)
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Mentor Graphics
ModelSim PE (10.1b)
N/A
N/A
N/A
Yes
Yes
Yes
Yes
Mentor Graphics
Questa Advanced
Simulator(10.1b)
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Cadence Incisive
Enterprise Simulator
(IES) (12.2)
Yes
Yes
Yes
N/A
N/A
N/A
N/A
Synopsys VCS and
VCS MX (G-2012.09)
Yes
Yes
Yes
N/A
N/A
N/A
N/A
The MathWorks
MATLAB® and
Simulink® with
Fixed-Point Toolbox
(2011a, 2011b,
2012a, 2012b)
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Aldec Active-HDL
(9.2)a
N/A
N/A
N/A
Yes
Yes
Yes
Yes
Aldec Riviera-PRO
(2012.10)
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Third-Party Tool
Windows Windows Windows- WindowsXP 32-bit XP 64-bit 7 32-bit
7 64-bit
Simulation
Vivado Design Suite 2013 Release Notes
UG973 (v2013.2) June 19, 2013
www.xilinx.com
13
System Requirements
Table 2-2:
Compatible Third-Party Tools
Red Hat
Linux
Red Hat
Linux-64
SUSE
Linux
Synopsys
Synplify/Synplify
Pro (H-2013.03)c
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Mentor Graphics
Precision RTL/Plus
(2012c)
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
N/A
N/A
N/A
N/A
Third-Party Tool
Windows Windows Windows- WindowsXP 32-bit XP 64-bit 7 32-bit
7 64-bit
Synthesisb
Equivalence Checking
Cadence Encounter
Conformal (9.1)d
a. Note: Support for Aldec simulators is offered by Aldec.
b. Note: Most Vivado IPs can only be synthesized by Vivado synthesis, because the RTL
source may include encrypted files. To use these IPs in a third-party synthesis flow, the
synthesized netlist can be exported from the Vivado tool in a suitable format for use in the
third-party synthesis project.
c. Note: Contact Synopsys for availability of Synplify Overlay or Service Pack.
d. Note: Cadence Encounter Conformal Support is for RTL2Gate using Synopsys Synplify
only.
System Requirements
This section provides information on system memory requirements, cable installation, and
other requirements and recommendations.
System Memory Recommendations
For memory recommendations for the Vivado Design Suite tools, see:
http://www.xilinx.com/design-tools/vivado/memory.htm.
Operating Systems and Available Memory
The Microsoft Windows and Linux ® operating system (OS) architectures have limitations on
the maximum memory available to a Xilinx program. Users targeting the largest devices and
most complex designs may encounter this limitation. The Vivado Design Suite has
optimized memory and enabled support for applications to increase RAM memory
available to Xilinx tools.
Vivado Design Suite 2013 Release Notes
UG973 (v2013.2) June 19, 2013
www.xilinx.com
14
System Requirements
Windows XP Professional 32-bit
Xilinx applications are enabled to take advantage of the memory increase feature on
Windows 32-bit systems. You must then modify Windows setting to get access to this larger
memory.
The standard Windows OS architecture limits the maximum memory available to a Xilinx
process to 2 Gigabyte (GB). In Windows XP Professional, Microsoft created an option to
support the ability of an application to address 3 GB of RAM. Xilinx Vivado Design Suite
tools have built-in support for this option. To take advantage of this capability, you must
also modify your Windows XP OS to enable this feature, which requires that you modify
your boot.ini file by adding a “/3GB” entry to the end of the “startup” line.
Before enabling 3 GB support for Xilinx applications, read the Microsoft Knowledge Base
Article #328269. If you upgrade your computer to Windows XP Service Pack 1 (SP1) and you
are using the /3GB switch, Windows may not restart without a patch from Microsoft. See
Answer Record 17905 for more information.
Additionally, before making this change, read:
•
Microsoft Bulletin Q17193 which contains information on “Application Use of 4GT RAM
Tuning”
•
Microsoft Bulletin Q289022 which contains instructions for editing your boot.ini file
Linux
For 32-bit Red Hat Enterprise Linux systems, the operating system can use the hugemem
kernel to allocate 4 GB to each process. More information can be found on the Red Hat
support site at http://www.redhat.com/docs/manuals/enterprise/.
Cable Installation Requirements
Platform Cable USB II is a high-performance cable that enables Xilinx design tools to
program and configure target hardware.
Note: The Xilinx Parallel Cable IV is no longer supported for debugging or programming.
To install Platform Cable USB II, a system must have at least a USB 1.1 port. For maximum
performance, Xilinx recommends using Platform Cable USB II with a USB 2.0 port.
The cable is officially supported on the 32-bit and 64-bit versions of the following
operating systems: Windows XP Professional, Windows-7, Red Hat Linux Enterprise, and
SUSE Linux Enterprise 11. Additional platform specific notes are as follows:
•
Root privileges are required.
•
SUSE Linux Enterprise 11: The fxload software package is required to ensure correct
Platform Cable USB II operation. The fxload package is not automatically installed on
Vivado Design Suite 2013 Release Notes
UG973 (v2013.2) June 19, 2013
www.xilinx.com
15
System Requirements
SUSE Linux Enterprise 11 distributions, and must be installed by the user or System
Administrator.
•
Linux LibUSB support: Support for Platform Cable USB II based upon the LibUSB
package is now available from the Xilinx website, see Answer Record 29310.
For additional information regarding Xilinx cables, refer to the following documents:
•
USB Cable Installation Guide (UG344) [Ref 3]
•
Platform Cable USB II Data Sheet (DS593) [Ref 4]
•
Parallel Cable IV Data Sheet (DS097) [Ref 5]
Equipment and Permissions
The following table lists related equipment, permissions, and network connections.
Table 2-3:
Equipment and Permissions Requirements
Item
Requirement
Directory permissions
Write permissions must exist for all directories containing design files to be
edited.
Monitor
16-bit color VGA with a minimum recommended resolution of 1024 by 768
pixels.
Drive
You must have a DVD-ROM for Vivado Design Suite (if you have received a
DVD, rather than downloading from the web).
Ports
To program devices, you must have an available parallel, or USB port
appropriate for your Xilinx programming cable. Specifications for ports are
listed in the documentation for your cable.
Note: Installation of the cable driver software requires Windows XP Pro
SP1 (or later), or Windows-7. If you are not using one of these operating
systems, the cables may not work properly.
Note: X Servers/ Remote Desktop Servers, such as Exceed, ReflectionX, and XWin32, are not
supported.
Network Time Synchronization
When design files are located on a network machine, other than the machine with the
installed software, the clock settings of both machines must be set the same. These times
must be synchronized on a regular basis for continued proper functioning of the software.
Vivado Design Suite 2013 Release Notes
UG973 (v2013.2) June 19, 2013
www.xilinx.com
16
Chapter 3
Download and Installation
This guide explains how to download and install the Vivado™ Design Suite tools which
includes the Vivado Integrated Design Environment (IDE), High Level Synthesis tool, and
System Generator for DSP.
Downloading the Vivado Design Suite Tools
This section explains how to download the Vivado Design Suite tools.
The Vivado Design Suite tools are available as a standalone download. This results in a
smaller and faster download.
Note: Vivado Design Suite 2013.2 offers the following device programming capabilities:
-
Connect to JTAG cable and query the device chain
-
Directly program a Xilinx® 7 series FPGA device with a BIT file
-
Check the various status registers of Xilinx 7 series FPGA devices
For all other capabilities offered by Xilinx ISE Lab Tools and Xilinx ISE Design Suite, you will
need to install the standalone version of the Xilinx ISE Lab Tools.
To begin, open an internet browser and navigate to the Xilinx Download Center at
http://www.xilinx.com/support/download/index.htm.
Most files in the Xilinx Download Center are downloaded using the Akamai download
manager. For the optimum download experience:
•
Allow pop-ups from entitlenow.com
•
Set security settings to allow for secure and non-secure items to be displayed on the
same page
•
Allow the Akamai download manager to run Java processes
To download the Xilinx Design Tools:
1. Select the Design Tools tab in the web page.
2. Under the Version heading, click the version of the tools you want to download.
3. Click the link for the installer you want to download.
Vivado Design Suite 2013 Release Notes
UG973 (v2013.2) June 19, 2013
www.xilinx.com
17
Installing the Vivado Design Suite Tools: Overview for All Platforms
Note: The multiple file download option contains four smaller downloadable archives and is the
recommended option for customers who cannot reliably download the larger install files. This
option requires all four files listed in the section be downloaded prior to running the installer.
See Important Information area of the web page section for more details.
4. Enter your User ID and Password to log into your Xilinx account.
Note: If you do not have a Xilinx account, you must create one in order to download products.
An address verification screen appears.
5. Once the current address is correct, click Next.
6. The Akamai download manager launches in your browser to complete the download
process. If you have trouble using the Akamai download manager, look on the download
page under “Having Trouble Downloading?”. You can follow a link to a Xilinx Answer
Record which will allow you to obtain the tools without using the download manager.
Most files in the Xilinx Download Center are packaged using TAR methods. You will need
to use software from a third party provider to unpack them. Consult your IT department
for assistance. Commonly used tools for TAR files are 7-ZIP, GNU built-in tools, WinZIP,
and WinRar. These tools are licensed solely by each respective developer, and not by
Xilinx. Xilinx hereby disclaims any warranties, express or implied, including warranties of
merchantability, fitness for a particular purpose, or non infringement with respect to
these suggested software tools.
Installing the Vivado Design Suite Tools: Overview
for All Platforms
This section explains the installation process for all platforms for the Vivado Design Suite
tools. Before installation:
•
Disable anti-virus software to reduce installation time.
•
Make sure you have the necessary privileges for the system on which the design tools
will be installed. Some components, such as programming cable device drivers, require
administrator-level permissions.
•
Close all open programs before you begin installation.
•
Make sure your system meets the requirements described in Chapter 2, Architecture
Support and Requirements.
•
Check the links in Important Information in Chapter 1 for any installation issues
pertaining to your system or configuration.
•
The Vivado Design Suite installer does not set global environment variables, such as
XILINX, on Windows. To find out if this affects the way you run Xilinx design tools, see
“Platform-Specific Installation Instructions.”
Vivado Design Suite 2013 Release Notes
UG973 (v2013.2) June 19, 2013
www.xilinx.com
18
Platform-Specific Installation Instructions
•
When running xsetup.exe from a 32-bit machine onto the network location of a
64-bit machine, the tools will install the 32-bit executables onto that machine and not
the 64-bit executables.
Platform-Specific Installation Instructions
This section provides platform-specific instructions for installing the Vivado Design Suite
tools.
Microsoft Windows Installation
How you start installation depends on how you obtained the installation program. See
Downloading the Vivado Design Suite Tools for details on your options.
•
If you downloaded an installation file, decompress that file and run xsetup.exe.
•
If you downloaded the installation file in multiple parts, decompress the file with the.zip
extension and run xsetup.exe. You should not decompress any other files
•
If you received a Xilinx Design Tools DVD, load the DVD. If the auto-run feature of your
DVD drive is enabled, the setup program should start automatically. If it does not,
browse to the DVD in Windows Explorer and run xsetup.exe.
Linux Installation
The method of starting the installation depends on how you have obtained the installation
program. See Downloading the Vivado Design Suite Tools for details on your options.
•
If you have downloaded an installation file, decompress that file and run the xsetup
program contained therein.
•
If you downloaded the installation file in multiple parts, decompress the file with the.zip
extension and run xsetup. You should not decompress any other files.
•
If you have ordered and received a Xilinx Design Tools DVD, load the DVD. Click the
setup file in your file manager, or browse to the root of your DVD drive and type
./xsetup.
Installation Flow
The following section describes important screens you will encounter during the installation
process.
Vivado Design Suite 2013 Release Notes
UG973 (v2013.2) June 19, 2013
www.xilinx.com
19
Installation Flow
Note: For each of the following installation steps, click on the text of any item with a check box next
to it to obtain more information. Information is displayed in the “Description” area near the bottom
of the screen.
Select Download Location Directory
This step applies to users who downloaded the installation files in multiple archive files. If you
downloaded a single image, skip to Accepting Software Licenses.
This screen lists all the required additional installation files to complete the installation.
Users will need to point the tool to a location that contains these files. All the required files
should be in the same directory. Once the correct files have been identified, the installer
will check the integrity of these files to ensure archives are not corrupt. This process might
take a few minutes to complete.
X-Ref Target - Figure 3-1
Figure 3-1:
Vivado Design Suite Installation - Select Download Location Directory
Vivado Design Suite 2013 Release Notes
UG973 (v2013.2) June 19, 2013
www.xilinx.com
20
Installation Flow
Accepting Software Licenses
You must accept two software license agreements. On each Accept Software Agreement
screen:
1. Click I accept and agree to the terms and conditions above.
2. Click Next.
Select Xilinx Products to Install
Select the Xilinx products you want to install.
X-Ref Target - Figure 3-2
Figure 3-2:
Vivado Design Suite Installation - Select Products
Vivado Design Suite 2013 Release Notes
UG973 (v2013.2) June 19, 2013
www.xilinx.com
21
Installation Flow
Select Installation Options
There are several optional installation steps during installation. If selected, these options
install toward the end of the installation process, after the main installation has completed.
Select Xilinx Installation Options from the following screen.
X-Ref Target - Figure 3-3
.
Figure 3-3:
Vivado Design Suite Installation - Select Installation Options
Note: WebTalk is always enabled when using the WebPACK™ tool. If you install an Edition product,
the installer allows you to deselect Enable WebTalk. However, if a WebPACK tool license is used to
process the design, Enable WebTalk is ignored. Please click on the Enable WebTalk item, in the
installer, and read the description box for full details.
Select Destination Directory
In the Select Destination Directory screen, select the directory in which to install the design
tools. Enter a name for the Program Folders list. The installer displays a level of hierarchy
Vivado Design Suite 2013 Release Notes
UG973 (v2013.2) June 19, 2013
www.xilinx.com
22
Installation Flow
underneath the installation path you specify. The name of the directory varies depending
on the type of product you are installing.
X-Ref Target - Figure 3-4
Figure 3-4:
Xilinx Design Tools Installation - Select Destination Directory
Installation Options Summary
The Installation Options Summary screen summarizes the tools, products, and options to be
installed. To begin installation, click Install.
Near the end of the installation, the Xilinx License Configuration Manager opens by default.
Follow the instructions in the Manager to obtain or locate a license file.
Note: EDK tools require the Cygwin tools distributed by RedHat. A copy of these tools is distributed
with the EDK installation.
Vivado Design Suite 2013 Release Notes
UG973 (v2013.2) June 19, 2013
www.xilinx.com
23
USB FLEXid Dongle Driver Installation
Setting Environment Variables
Microsoft Windows Clients
When installation is complete, the installation program creates an environment variable
batch file. All appropriate Desktop and Program Group shortcuts call this file before
launching the target application.
To set environment variables in make or script files:
Add <XILINX installation directory>\settings32.bat or settings64.bat to
your script. The numbers 32 or 64 corresponds to the bit-width of the operating system
installed on the computer.
Linux Clients
When installation is complete, the installation program creates an environment variables
file.
1. Go to the XILINX installation directory.
2. Type either source settings32.(c)sh or source settings64.(c)sh, as
required for your shell.
To set your environment variables manually or from within your setup script, Xilinx
recommends you copy the settings from the appropriate file for your operating system, as
listed above. Xilinx environment variables settings are specific to each operating system
platform.
USB FLEXid Dongle Driver Installation
If you purchased a USB FLEXid Dongle for use with the Windows operating systems, you
must install the appropriate driver before creating a FLEXnet license for use with it.
1. Install the Xilinx Design Tools first. This installation contains the installer files for the
USB FLEXid dongle driver.
2. Run FLEXId_Dongle_Driver_Installer.exe from <Xilinx Installation
Directory>\Vivado\2013.2\lds_lite\ISE\bin\nt.
3. On the Select Options screen, be sure only FLEXid 9 Drivers is checked.
Vivado Design Suite 2013 Release Notes
UG973 (v2013.2) June 19, 2013
www.xilinx.com
24
Network Installations
X-Ref Target - Figure 3-5
Figure 3-5:
Select Options Screen
4. Click Next twice. The driver installs.
After installation, you will need to reboot to ensure the dongle operates correctly.
Network Installations
Installing to a network location provides a way for client machines to access the design
tools by pointing to it on the network drive. To run the design tools on the network, the
client machines must be set up correctly to ensure the environment variables, registry, and
program groups all point to the network. The following sections describe the procedure for
network setups.
Linux Clients
Each user must source settings32.(c)sh or settings64.(c)sh (whichever is
appropriate for your operating system) from the $XILINX area in which the design tools are
installed. This points the Xilinx environment variable, path, and LD_LIBRARY_PATH to the
installed location.
Vivado Design Suite 2013 Release Notes
UG973 (v2013.2) June 19, 2013
www.xilinx.com
25
Network Installations
To run the design tools from a remotely installed location, run an X Windows display
manager, and include a DISPLAY environment variable. Define DISPLAY as the name of your
display. DISPLAY is typically unix:0.0. For example, the following syntax allows you to run the
tools on the host named bigben and to display the graphics on the local monitor of the
machine called mynode:
setenv DISPLAY mynode:0.0
xhost = bigbenPC Clients
Microsoft Windows Clients
1. Install design tools to a PC network server. Make sure your users know the location of
the design tools and have access to the installation directory, and they have
Administrator privileges for the following steps.
2. From the local client machine, browse to the following directory:
network_install_location\Vivado\<version>\bin and run the program
shortcutSetup.bat.
3. Running this program sets up the Windows settings batch files and Program Group or
Desktop shortcuts to run the Xilinx tools from the remote location.
4. From the client machine, launch the Vivado Design Suite tools by clicking the Program
Group or Desktop shortcuts, or by running the applications on the network drive.
Installing to a Mounted Network Drive
Xilinx design tools are designed to be installed in a directory under ROOT (typically C:
\Xilinx). The installer normally presents this option when installing to a local driver. When
installing to a mounted network drive, if a subdirectory is not defined, it appears to the
Installer as if it is installing to a ROOT directory.
To work around this issue, define your target installation directory as "\Xilinx" under the
network mount point (For example: “N:\Xilinx”).
Windows 7 default security levels won’t allow you to select remote mapped drives as an
Administrator. In order to install Xilinx Design Tools on remote mapped drives, you need to
change your account control settings using the steps below:
1. Open the Windows Control Panel, from the Windows Start menu, and select ‘User
Accounts’. If your Control Panel Uses ‘Category View’, you will need to click ‘User
Accounts’ on two successive screens
2. Click on ‘Change User Account Control settings’ and allow the program to make
changes
3. Click and slider the slider-bar down to the second to lowest setting (as seen in the below
figure). Click OK.
Vivado Design Suite 2013 Release Notes
UG973 (v2013.2) June 19, 2013
www.xilinx.com
26
Obtaining Quarterly Releases
X-Ref Target - Figure 3-6
Figure 3-6:
User Account Control Settings
Xilinx recommends you revisit this procedure to restore your settings to their previous state
after installation.
Note: You will not be able to browse to remote mapped drives using the Xilinx installer. You will
need to manually type in your installation path which contains a mapped network drive.
Obtaining Quarterly Releases
Xilinx releases quarterly versions of the Vivado Design Suite tools throughout the year. Each
quarterly version contains device support updates, new features and bug fixes. The
following sections describe how to obtain updates through XilinxNotify and the Download
Center.
Vivado Design Suite 2013 Release Notes
UG973 (v2013.2) June 19, 2013
www.xilinx.com
27
Uninstalling the Vivado Design Suite Tool
XilinxNotify
The XilinxNotify tool is the preferred method of obtaining updates. It provides the following
features:
•
Compares the latest version of Xilinx design tools updates available on the Xilinx
Support website with what you have installed, and notifies you if a newer version is
available.
•
Provides a Download button allowing you to log in to the Xilinx Download Center. Once
you log in, the download of your selected product begins.
•
XilinxNotify will run automatic periodic checks at Vivado tools startup time.
Note: Select Edit > Preferences in the Vivado IDE to control the frequency of the automatic
periodic checks.
Download Center
Quarterly releases for all platforms are regularly made available on the Xilinx Download
Center [Ref 6].
Uninstalling the Vivado Design Suite Tool
Before uninstalling, make sure to have moved any project f iles you want to keep outside
your X ilinx installation director y structure, or they will be deleted.
Note: Xilinx Documentation Navigator will not be removed during uninstallation. It is intended to be
a standalone application common to multiple versions of Xilinx tools. You will need to uninstall it
separately if it is no longer required.
Uninstalling on Microsoft Windows
To uninstall any Xilinx product, select the Uninstall item from that product’s Start Menu
folder. For instance, to uninstall the Vivado WebPACK design tools or an Vivado Design
Suite: Edition, select Start > All Programs > Xilinx Design Tools > Vivado 2013.2 > Accessories >
Uninstall.
Uninstalling on Linux
To uninstall the Vivado Design Suite tool product, launch the uninstaller from the launcher
menu, Applications > Xilinx Design Tools > Vivado 2013.2 > Accessories > Uninstall.
Vivado Design Suite 2013 Release Notes
UG973 (v2013.2) June 19, 2013
www.xilinx.com
28
Chapter 4
WebTalk
The WebTalk feature helps Xilinx understand how you use Xilinx® FPGA devices, software,
and intellectual property (IP). The information collected and transmitted by WebTalk allows
Xilinx to improve the features most important to you as part of our ongoing effort to
provide products that meet your current and future needs. When enabled, WebTalk
provides information on your use of the Vivado™ Design Suite tools.
WebTalk Participation
Your participation in WebTalk is voluntary except in the following cases:
•
You are using a WebPack™ license.
•
You are using pre-release software or devices.
In these cases, WebTalk data collection and transmission always occurs, regardless of your
preference settings. For all other cases, data is not collected or transmitted if you disable
WebTalk.
The table below summarizes WebTalk behavior for data transmission to Xilinx from your
post-route design, based on your Xilinx license, WebTalk install preference, and user
preference settings.
Table 4-1:
WebTalk Behavior for Bitstream Generation or Route Design Flow
License
WebTalk Install
Preference
WebTalk User
Preference
WebTalk Data
Transmission to
Xilinx
Bitstream
Generation/ Route
Design
WebPACK
(or pre-release software)
Ignored
Ignored
Yes
(Send)
Bitstream
Generation/ Route
Design
Design Edition or
System Edition
Enabled
Enabled
Yes
(Send)
Design Flow
Vivado Design Suite 2013 Release Notes
UG973 (v2013.2) June 19, 2013
www.xilinx.com
29
Setting WebTalk Install Preference
Table 4-1:
WebTalk Behavior for Bitstream Generation or Route Design Flow
License
WebTalk Install
Preference
WebTalk User
Preference
WebTalk Data
Transmission to
Xilinx
Bitstream
Generation/ Route
Design
Design Edition or
System Edition
Enabled
Disabled
No
(Do Not Send)
Bitstream
Generation/ Route
Design
Design Edition or
System Edition
Disabled
Ignored
No
(Do Not Send)
Design Flow
Note: WebTalk currently transmits data after Route Design for all devices.
Setting WebTalk Install Preference
You can enable or disable WebTalk globally during or after installation as described below.
During installation you can enable or disable WebTalk installation options by checking or
unchecking the Enable WebTalk to send software, IP and device usage statistics to Xilinx
(Always enabled for WebPACK license) checkbox.
Vivado Design Suite 2013 Release Notes
UG973 (v2013.2) June 19, 2013
www.xilinx.com
30
Setting WebTalk Install Preference
X-Ref Target - Figure 4-1
Figure 4-1:
WebTalk Install Options
You can enable or disable WebTalk installation options using the Tcl command
config_webtalk:
config_webtalk -install on|off
on turns WebTalk on for the installation.
off turns WebTalk off for the installation.
Install settings are saved in the following location:
•
Windows 7: <install dir>/vivado/data/webtalk/webtalksettings
•
Linux: <install dir>/vivado/data/webtalk/webtalksettings
Note: You need administrator privileges to write to the install location.
Vivado Design Suite 2013 Release Notes
UG973 (v2013.2) June 19, 2013
www.xilinx.com
31
Setting WebTalk User Preferences
Setting WebTalk User Preferences
You can enable or disable WebTalk user options by selecting Tools > Options > General as
shown below.
X-Ref Target - Figure 4-2
Figure 4-2:
WebTalk User Preferences
After installation, you can enable or disable WebTalk user options using the
config_webtalk Tcl command:
config_webtalk -user on|off
on turns WebTalk on for the current user.
off turns WebTalk off for the current user.
User settings are saved in the following location:
•
Windows 7:
Vivado Design Suite 2013 Release Notes
UG973 (v2013.2) June 19, 2013
www.xilinx.com
32
Checking WebTalk Install and User Preferences
%APPDATA%\Xilinx\Common\<version>\webtalk
where:
%APPDATA% is:
C:\Users\<user>\AppData\Roaming
•
Linux:
%APPDATA%/.Xilinx/Common/<version>/webtalk
where:
%APPDATA% is:
/home/<user>
Checking WebTalk Install and User Preferences
You can also use the config_webtalk Tcl command to check the current status of
WebTalk settings. The command line option -info reports the values for the install setting
and the user setting:
config_webtalk -info
Types of Data Collected
WebTalk does not collect your design netlist or any other proprietary information that can
be used to reverse engineer your design. The data that Xilinx collects through WebTalk
includes:
•
Software version
•
Platform information (for example, operating system, speed and number of processors,
and main memory)
•
Unique project ID
•
Authorization code
•
Date of generation
•
Targeted device and family information
For more information on the type of data that is collected, see the Xilinx Design Tools
WebTalk page [Ref 7] available from the Xilinx website. To see the specific WebTalk data
Vivado Design Suite 2013 Release Notes
UG973 (v2013.2) June 19, 2013
www.xilinx.com
33
Transmission of Data
collected for your design, open the usage_statistics_webtalk.xml file in the project
directory. You can also open the usage_statistics_webtalk.xml file for easy viewing
of the data transmitted to Xilinx.
Transmission of Data
WebTalk is invoked after bitstream or route design compilation. WebTalk bundles the collected
data in an usage_statistics_webtalk.xml file and sends this file to Xilinx by https
(hypertext transfer protocol secure) post. Every new compilation for a given design overwrites the
previous usage_statistics_webtalk.xml file. WebTalk also writes an HTML file equivalent
usage_statistics_webtalk.html file for easy viewing of the data transmitted to Xilinx.
WebTalk also writes to the vivado.log (or runme.log) file that contains additional
information about whether the file was successfully transmitted to Xilinx.
Vivado Design Suite 2013 Release Notes
UG973 (v2013.2) June 19, 2013
www.xilinx.com
34
Chapter 5
Obtaining and Managing a License
The Xilinx® Product Licensing Site is an online service for licensing and administering
evaluation and full copies of Xilinx design tools and intellectual property (IP) products. This
chapter describes the FLEXnet license generation functionality of the Product Licensing
Site.
Accessing the Product Licensing Site
You can access the Xilinx Product Licensing Site in various ways depending upon the type of
license being generated.
•
If you purchased products, follow the link included in your order confirmation email. It
will provide direct access to an account containing your product entitlements.
•
To evaluate the Vivado™ Design Suite products, go to
http://www.xilinx.com/products/design_tools/vivado/vivado/vivado-webpack.htm.
•
To evaluate IP products, go to http://www.xilinx.com/ipcenter and follow the Evaluate
link on the IP product page of interest.
•
To access the Product Licensing Site directly, go to http://www.xilinx.com/getlicense.
You must first register or enter your registration information.
Vivado Design Suite 2013 Release Notes
UG973 (v2013.2) June 19, 2013
www.xilinx.com
35
Changing Xilinx User Account Information
X-Ref Target - Figure 5-1
Figure 5-1:
Xilinx Licensing Sign In Page
You must first sign in. If you already have a Xilinx user account, enter your user ID and
password, and then confirm your contact information is current. If you do not have an
account, click the Create Account button.
Changing Xilinx User Account Information
It is important to keep your Xilinx User Account up to date. As you change companies,
addresses or emails may change.
Modifying your Corporate Email Address
1. Go to www.xilinx.com.
X-Ref Target - Figure 5-2
Figure 5-2:
Xilinx Website
2. Click Sign In.
Vivado Design Suite 2013 Release Notes
UG973 (v2013.2) June 19, 2013
www.xilinx.com
36
Changing Xilinx User Account Information
X-Ref Target - Figure 5-3
Figure 5-3:
Personal Information
3. Expand Personal Information.
Vivado Design Suite 2013 Release Notes
UG973 (v2013.2) June 19, 2013
www.xilinx.com
37
Changing Xilinx User Account Information
X-Ref Target - Figure 5-4
Figure 5-4:
Enter New Corporate email Address
4. Enter your new corporate email address in the Enter new Corporate email address box.
5. Click Save Profile button for changes to take effect.
Vivado Design Suite 2013 Release Notes
UG973 (v2013.2) June 19, 2013
www.xilinx.com
38
Product Licensing Accounts
Product Licensing Accounts
When you purchase a design tool edition or IP product from Xilinx, you are purchasing a
license to use and receive updates for that product for one year. The license to use Xilinx
deign tools and IP products is managed through the use of product entitlements. A product
entitlement is the determination of:
•
Which product was purchased
•
The number of seats purchased
•
The license type (floating or node-locked)
•
The product subscription period (product updates are provided throughout the year)
In addition to managing the product entitlements for your purchased design tools and IP,
you can also access product entitlements for No Charge or Evaluation products. Full and No
Charge licenses have a subscription period of one year. Design tools evaluations are for 30
days, and IP evaluations are for 120 days.
Activating a product entitlement results in one or more license keys being generated by the
website. When installed, the license keys enable the use of the design tools and IP that were
purchased or are being evaluated. Your product entitlements and resulting license key files
are managed in a product licensing account on the Xilinx website.
Product licensing accounts are specific to the individual listed on the Xilinx Software
Purchase Order, who is either the end user or administrator of the design tools. All
purchases made can be managed in the same product licensing account if a single
administrator is named. A company site can have multiple accounts managed by different
administrators. The latter is helpful if a site has multiple design teams working on differing
projects with different budget pools.
Note: A license key can be generated for a product entitlement that has expired; however, it will only
enable product releases up to the subscription end date. Applying a product update made available
after the subscription end date of your license results in an error.
LogiCORE IP License Generation in the Xilinx Design Tools
Any LogiCORE™ IP and design tools entitlements you have purchased appear in your list of
entitled products when you log into the Product Licensing Site. Licenses for Evaluation and
No Charge IP are available on the site in a separate area. Licenses for all your design tools
and IP can now be generated in one pass. They are emailed to you in a single license file. IP
core FLEXnet licenses now feature more licensing options, such as single or
Triple-Redundant Floating Server support, and more host options for node-locked license
keys: Ethernet MAC address, Hard Drive Serial Number or USB Dongle ID.
Vivado Design Suite 2013 Release Notes
UG973 (v2013.2) June 19, 2013
www.xilinx.com
39
User Types and Actions
User Types and Actions
There are three user types for the Product Licensing Site: customer account administrator,
end user, and evaluation user.
Customer Account Administrator
An example of a typical customer account administrator is a CAD tools manager. Every
product licensing account must have at least one customer account administrator. A
customer account administrator can manage more than one product licensing account.
The responsibilities as the customer account administrator include:
•
Generating node-locked or floating licenses for Xilinx design tools and IP products.
•
Adding and removing users from the product licensing account.
•
Assigning administrative privileges to other users.
•
Ordering product DVDs (if desired).
The original customer account administrator is the Ship To contact identified during the
product ordering process. That person will receive an email with instructions on how to
download and license each purchased product. The customer account administrator must
follow the link in the email, to ensure access to the purchased products.
End User
Adding end users to a product licensing account allows an engineer or design team
member the flexibility to manage and generate license keys on their own. The end user may
generate license keys for node-locked products entitlements within the account as well as
evaluation and “no charge” license keys for design tools and IP products. A customer
account administrator can also configure the end user account to allow an end user to
generate floating licenses. An end user cannot:
•
View or generate floating license keys by default. This privilege may be assigned to
them by the customer account administrator.
•
View the license keys generated by other users.
•
Add or remove other users to or from the product licensing account.
Evaluation User
Evaluation users can:
Vivado Design Suite 2013 Release Notes
UG973 (v2013.2) June 19, 2013
www.xilinx.com
40
Creating a License Key File
•
Generate a 30-day free evaluation license key that will enable both ISE and Vivado
System Edition
•
Generate license keys for evaluation and no charge IP products
•
Generate a WebPACK™ tool license that will enable WebPACK features in both ISE and
Vivado
•
Request a Xilinx Design Tools DVD package with one of the following shipping options:
°
Free Shipping (2-4 Weeks)
°
Standard (2-3 Days)
°
Overnight
Note: A customer who is already licensed for a full version of a Xilinx Design Tools product edition
can evaluate other Xilinx Design Tools product editions or IP. These product entitlements are made
available in the same product licensing account.
All user types can download products electronically and request a Xilinx Design Tools DVD.
Creating a License Key File
The Create New Licenses tab on the Product Licensing Site is the starting point for license
key file generation. The design tools and IP product entitlements you have purchased or
wish to evaluate are shown in the product entitlement table.
Vivado Design Suite 2013 Release Notes
UG973 (v2013.2) June 19, 2013
www.xilinx.com
41
Creating a License Key File
X-Ref Target - Figure 5-5
Figure 5-5:
Create New License
Selecting Products
To begin the license generation process for products you have purchased or want to
evaluate:
1. Select a product licensing account from the Account drop-down list.
Note: This selection is not available if you are entitled to evaluation or free products only.
2. Enter product voucher codes for design tools or IP product licenses purchased with kits
or for tools purchased from the Xilinx online store (optional).
3. Add evaluation or no-charge IP product entitlements to the product entitlement table
(optional).
4. Make your product selections from the product entitlement table.
The type of product entitlements available are Full (purchased), No Charge, or Evaluation.
Full and No Charge licenses have a subscription period of one year. Design tools evaluation
is for 30 days. IP evaluations are for 120 days.
Floating and node-locked licenses cannot be combined in the same license key file.
Vivado Design Suite 2013 Release Notes
UG973 (v2013.2) June 19, 2013
www.xilinx.com
42
Creating a License Key File
Note: A floating license resides on a network server and enables applications to check out a license
when they are invoked. At any one time, the number of licenses for simultaneous users is restricted
to the number of license seats purchased. A node-locked license allows for the use of a single seat
of a product entitlement on a specific machine.
For design tools, available seats represents the number of seats available for licensing over
the total number of seats purchased. For IP, seats are managed according to the terms of the
site wide license agreement.
Products with a status of Current are within their warranty period. Products with a status of
Expired have a warranty period end date that has passed. If seats are available, licenses can
be generated for either Current or Expired product entitlements.
The Xilinx Design Tools: System Edition evaluation product entitlement provides access to
all the capabilities in the Xilinx Design Tools tool set. This product entitlement is
automatically included in your product licensing account.
Product vouchers for design tools and IP product licenses may be shipped with a Xilinx or
partner development board or design kit. If you have a product voucher card, you may enter
the voucher code on the card into the associated text field and click Redeem Now. This
places the corresponding design tools or IP product entitlement in the product entitlement
table which you can use to generate a license key.
To add Evaluation and No Charge IP to the list of product entitlements, click the Search Now
button in the Add Evaluation and No Charge IP Cores section of the page. This opens an IP
product finder tool.
X-Ref Target - Figure 5-6
Figure 5-6:
Vivado Design Suite 2013 Release Notes
UG973 (v2013.2) June 19, 2013
IP Product Selector
www.xilinx.com
43
Creating a License Key File
Note: IP products are typically sold as site licenses that gives the administrator the ability to
generate license keys for floating and node-locked license types. End users see only product
entitlements for node-locked products. The customer account administrator, or an End User who has
been granted Floating License generation status by the administrator, sees product entitlements for
both node-locked and floating products.
Generating a License
Click the Generate License button corresponding to the type of license key file you are
generating (floating or node-locked). The license generation form shown below appears.
X-Ref Target - Figure 5-7
Figure 5-7:
Generate Floating License
To generate floating licenses:
1. Select the number of seats required for each product license.
Vivado Design Suite 2013 Release Notes
UG973 (v2013.2) June 19, 2013
www.xilinx.com
44
Creating a License Key File
This is for floating licenses only. All node-locked licenses are for one seat. The number
of seats available for a product entitlement is automatically maintained by the system.
The Requested Seats field is populated, by default, with the full number of seats
remaining on the product entitlement. A product is removed from the product
entitlement table if all seats have been activated.
2. Enter system information.
System information is pre-populated in the option menu if you arrived at the Product
Licensing Site from a link within the Xilinx License Configuration Manager (XLCM).
A redundant server configuration provides a fail over for the license manager software.
As long as two of the three servers are running, the license manager can continue to run.
If you do not have pre-populated system information, or if you want to add a different
host, select the Add a host option.
X-Ref Target - Figure 5-8
Figure 5-8:
Add a Host
The host ID value uniquely identifies the machine to which your design tools or IP is
licensed. You may choose a host ID type to be a MAC address, a hard drive serial
number, a dongle ID, or a Solaris host ID.
Note: Not all host ID types are supported for all operating systems. The easiest way to obtain
your host ID is to run the XLCM on the machine that will serve as the license host.
3. Add a comment.
Adding a comment to the license key file makes it easier for an administrator to track
the allocation of design tools and IP product entitlements among users.
4. Click Next.
The Review License Request form opens.
Vivado Design Suite 2013 Release Notes
UG973 (v2013.2) June 19, 2013
www.xilinx.com
45
Creating a License Key File
X-Ref Target - Figure 5-9
Figure 5-9:
Review License Request
5. Review your selections.
6. If you are satisfied with your selections, click Next.
End User License Agreements
Xilinx Design Tools and No Charge IP product End User License Agreements (EULAs) are
agreed to during the product installation process. If you license IP products, you must
accept the terms of the associated IP product EULAs before the license file can be
generated.
Third-Party Licenses
A complete copy of the third-party licenses is located at:
<install_directory>/common/licenses/unified_3rd_party_eula.txt
License Generation Confirmation
When you finish generating the licenses, you will receive a confirmation message
summarizing your licensing activity.
Vivado Design Suite 2013 Release Notes
UG973 (v2013.2) June 19, 2013
www.xilinx.com
46
Managing License Key Files
X-Ref Target - Figure 5-10
Figure 5-10:
License Generation Confirmation
You will also receive a license generation confirmation email. This message contains the
generated license key file as an attachment. Add ‘[email protected]’ as a
trusted sender in your email address book.
If you do not receive your license by email, you can download it directly from the Xilinx Licensing
Site. See the Managing License Key Files section for details
Managing License Key Files
The Product Licensing Site tracks your license key files. Select the Manage Licenses tab to
see all license key files for your product licensing account.
Vivado Design Suite 2013 Release Notes
UG973 (v2013.2) June 19, 2013
www.xilinx.com
47
Managing License Key Files
X-Ref Target - Figure 5-11
Figure 5-11:
Manage Licenses
Use the Manage Licenses page, to perform the actions described below.
Exploring and Retrieving Your Existing License Key Files
Information regarding the license key files in your product licensing account are displayed
in a split-section view. Click a row in the master view in the top table, to see detailed
information about the license key file in the detail view in the bottom table. The detail view
table displays:
•
A list of product entitlements activated in the key file.
•
Comments associated with the key file.
The detail view table gives you the ability to:
•
Download - If your license file does not arrive via email you may download the license
file here.
•
Email - The license file may be emailed to you or another user.
•
View - Gives you the ability to view the actual license file.
Vivado Design Suite 2013 Release Notes
UG973 (v2013.2) June 19, 2013
www.xilinx.com
48
Managing License Key Files
•
Delete - Delete the license file. Once a file is deleted it will then become available on
the Create New License page and may be regenerated for another host ID.
•
View the end user license agreement (IP only).
Modifying a License Key File
To modify an existing license key file, select the license key file in
the master view. You can modify a license key file as follows:
Delete an entire license file and place entitlement back into your account
1. From the Manage Licenses Tab (see Figure 5-11), select the license file you wish to
delete.
2. Click the Trash Can icon located below and to the left of the license file details.
3. Click the Accept button to accept the Affidavit of Destruction.
Note: This will delete all license seats in the entire license key file and return the entitlements to
your account.
Rehost or change the license server host for a license key file
1. From the Manage Licenses Tab (see Figure 5-11), select the license file you wish to
rehost.
2. Click the Modify License button. The Modify License screen appears.
3. Go to System Information.
4. Change or add new Host ID and/or Host Name by using the drop-down list and text entry
boxes respectively.
5. Click the Next button twice and then click the Accept button to accept the Affidavit of
Destruction.
Activate or add additional seats to an existing licensed product entitlement
1. From the Manage Licenses Tab (see Figure 5-11), select the license file to which you
wish to add seats.
2. Click the Modify License button. The Modify License screen appears.
3. Go to Product Selection.
4. For floating licenses, you will be able to change the Requested Seats field and add seats up to
the total number of seats available in your entitlement.
5. Click Next twice. No Affidavit of Destruction is required for adding seats.
Vivado Design Suite 2013 Release Notes
UG973 (v2013.2) June 19, 2013
www.xilinx.com
49
Managing License Key Files
Deactivate or remove seats from an existing licensed product entitlement
1. From the Manage Licenses Tab (see Figure 5-11), select the license file from which you
wish to remove seats.
2. Click the Modify License button. The Modify License screen appears.
3. Go to Product Selection.
4. For floating licenses, you will be able to change the Requested Seats field and reduce the
number of seats that will be authorized by this license file.
5. Click the Next button twice and then click the Accept button to accept the Affidavit of
Destruction.
Activate or add additional product entitlements to a license key file
1. From the Manage Licenses Tab (see Figure 5-11), select the license file to which you
wish to add features/entitlements.
2. Click the Modify License button. The Modify License screen appears.
3. Go to Product Selection.
4. Check boxes of any new entitlements you wish to add to this license file.
5. Click Next twice. No Affidavit of Destruction is required for adding features.
Deactivate or delete product entitlements from a license key file
1. From the Manage Licenses Tab (see Figure 5-11), select the license file to which you
wish to add features/entitlements.
2. Click the Modify License button. The Modify License screen appears.
3. Go to Product Selection.
4. Check boxes of any entitlements you wish to remove from this license file.
5. Click the Next button twice and then click the Accept button to accept the Affidavit of
Destruction.
Modifying a key file uses the same input form as when the license key file was created,
except additional product entitlements of the same license type (floating or node-locked)
are made available for licensing.
If, during any of the modification steps, you receive a message that you have exceeded your
number of rehost attempts, email [email protected] to request additional rehost options.
Reclaiming Deactivated Product Entitlements
A product entitlement is deactivated when one of the following occurs:
Vivado Design Suite 2013 Release Notes
UG973 (v2013.2) June 19, 2013
www.xilinx.com
50
Legacy Licensing
•
Rehosting or changing the license server host for a license key file.
•
Deactivating or removing seats from an existing licensed product entitlement.
•
Deactivating or deleting product entitlements from a license key file.
The license generation facility allows the reallocation of the deactivated seats or product
entitlements by making the corresponding seats or product entitlements available for
activation in the product entitlements table on the Create License page.
Before the reallocation of entitlement occurs, you must first agree to an Affidavit of
Destruction. This legal agreement is required to ensure the deactivated product
entitlements are no longer being used.
The number of allocation operations is recorded for each user. Administrators are allowed
to reallocate product entitlements five times per major release. End users are allowed to
reallocate product entitlements three times per major release.
What Happens to Your License Key File
For each product entitlement activated, a FLEXnet increment line and corresponding
package line is added to the license key file. When a license key file is modified to activate
(add) seats for an existing or new product entitlement, additional increment or package
lines are added to the license key file.
When a license key file is rehosted or is modified to deactivate (delete) seats or product
entitlements, the corresponding increment lines are regenerated or removed from the
modified license key file.
Legacy Licensing
If you wish to obtain a license for Releases 10.1 or earlier, click the Legacy Licensing tab.
Vivado Design Suite 2013 Release Notes
UG973 (v2013.2) June 19, 2013
www.xilinx.com
51
Understanding Your Tool and IP Orders
X-Ref Target - Figure 5-12
Figure 5-12:
Legacy Licensing
Then complete the following steps for the respective versions:
10.1 and Prior Versions
1. Select the version you desire. You will be prompted to verify your contact information.
2. Fill out the requested form with the required information to receive your registration
IDs. Your registration ID will be displayed on the screen and emailed for your records.
3. Go to the Xilinx download center, click the Archive link under the Version column on
the left side of the page to select the product you desire.
4. During the download process you will be prompted to insert your registration ID to
complete the download process.
Understanding Your Tool and IP Orders
The Orders tab will display information regarding the purchasing orders that created the
entitlements you see in this account.
Vivado Design Suite 2013 Release Notes
UG973 (v2013.2) June 19, 2013
www.xilinx.com
52
Managing User Access to Product Licensing Account
X-Ref Target - Figure 5-13
Figure 5-13:
Order Information
•
Xilinx order numbers are listed on the left panel of the screen.
•
Order details populate on the right panel of the screen when you highlight specific
order.
•
You may only select one order at a time.
•
The order’s shipping address information is visible even when product is delivered
electronically.
Managing User Access to Product Licensing
Account
The responsibility of administering a product licensing account may be transferred or
shared with another user. The ability to add or remove users from a product licensing
account is managed under the Manage Users tab.
Vivado Design Suite 2013 Release Notes
UG973 (v2013.2) June 19, 2013
www.xilinx.com
53
Managing User Access to Product Licensing Account
X-Ref Target - Figure 5-14
Figure 5-14:
Manage Users
Adding Users
To add a user to your product licensing account:
•
Type in the corporate email address of the new user.
•
Check Add as a full administrator, to grant the new user customer account administrative
privileges. Check Allow Floating Licenses, to grant the new user the ability to generate
Floating Licenses, but not have full administrative privileges.
Note: The email address you provide must be the same email address the user supplied or supplies
when creating their Xilinx account. If not, the user may not be properly recognized when logging in.
If a user has already logged into the Product Licensing Site, their name appears in the user
list. If the user has never been to the site, the words Not Yet Registered appears in the space
for their name. Once the user has signed in, their name is filled in.
In some instances, a customer account administrator may wish to have design team
members administer license key files for their own use. By leaving both Add as full
administrator and Allow Floating Licenses check boxes unchecked, the user is granted the
following restricted privileges:
•
Can generate node-locked license keys only.
•
Can view and modify only those license key files they generated for themselves.
Vivado Design Suite 2013 Release Notes
UG973 (v2013.2) June 19, 2013
www.xilinx.com
54
Installing Your License Key File
•
Cannot manage users.
If you check Allow Floating Licenses only, the restriction on node-locked keys is lifted, but
the others remain. You cannot check both boxes since it is not allowed. Full administrators
already have floating license generation capability.
Removing Users
To remove administrative or floating license generation privileges from a user, uncheck the
Administrator or Floating check box for that user.
To remove a user from a product licensing account, click the Trash Can icon for that user.
Installing Your License Key File
The following subsections describe installing different types of licenses.
Node Lock License Installation
After generating a license file, you will receive an e-mail from
‘[email protected]’.
1. Save the license file attached to the e-mail to a temporary directory on your local
system.
2. Run the Xilinx License Configuration Manager:
°
For Windows: Select Start > All Programs > Xilinx Design Tools 14.4 >Accessories >
Manage Xilinx Licenses.
°
For Linux: Type xlcm in a command-line shell.
3. Click Copy License at the top of the Manage Xilinx Licenses tab.
4. Browse to your license file (Xilinx.lic) and click Open.
5. This copies the license file to the C:\.Xilinx (Windows) or <Home>/.Xilinx
directory of your computer where it will be automatically found by the Xilinx tools.
6. When the Copy License operation is complete, the table on the Manage Xilinx Licenses
tab is updated with licensing information from the license file.
7. Click Close to exit the Xilinx License Configuration Manager.
Vivado Design Suite 2013 Release Notes
UG973 (v2013.2) June 19, 2013
www.xilinx.com
55
Installing Your License Key File
Floating License Installation on Servers
For existing FLEXnet license servers, a common practice is to copy the contents of the
license file, mailed from ‘[email protected]’, into the existing license file
on your FLEXnet server.
Note: Restart the floating license server to enable the Xilinx licenses.
For New License Servers
1. Download the appropriate Xilinx FLEXnet license utilities for your server's operating
system from the Xilinx Download Center at http://www.xilinx.com/download/index.htm.
2. Unzip these utilities into a destination directory. Xilinx recommends you place this
directory into your application search path.
3. Once the FLEXnet utilities are installed, run the following commands to start the floating
license server:
°
°
Linux
-
<Server Tool directory>/bin/lin/lmgrd -c <path_to_license>/Xilinx.lic -l
<path_to_license>/log1.log
-
<Server Tool directory> bin/lin64/lmgrd -c <path_to_license>/Xilinx.lic -l
<path_to_license>/log1.log
Windows
-
< Server Tool directory>\bin\nt\lmgrd -c <path_to_license>\Xilinx.lic –l
<path_to_license>\log1.log
-
< Server Tool directory>\bin\nt64\lmgrd -c <path_to_license>\Xilinx.lic –l
<path_to_license>\log1.log
Client Machines Pointing to a Floating License
1. Run the Xilinx License Configuration Manager (XLCM).
2. Click the Manage Xilinx Licenses tab.
3. On the Manage Xilinx Licenses tab, enter the network path to the license server in the
[email protected] format into the XILINXD_LICENSE_FILE field. Click Set. The default Xilinx
port number is 2100.
4. For Linux operating systems, licensing environment variables cannot be set using the
Xilinx License Configuration Manager (XLCM). The environment variable fields are read
only, and they are grayed out and there are no Set buttons. The environment variable
must be set using the appropriate shell and commands.
Vivado Design Suite 2013 Release Notes
UG973 (v2013.2) June 19, 2013
www.xilinx.com
56
Chapter 6
Older Release Notes
Vivado 2013.1
What’s New
Vivado™ Design Suite 2013.1 introduces two major advances in productivity that will
accelerate both time to integration and system-level design. It features the early access of
the Vivado IP integrator which is the new Xilinx® intellectual property (IP) centric design
environment. It also includes a comprehensive set of libraries to accelerate C/C++
system-level design and high-level synthesis (HLS) in the Vivado HLS tool.
Device Support
•
•
Zynq™-7000 devices now supported
°
Requires Early Access to Vivado IP integrator
°
Zynq support includes 7Z100 device
The following devices are production ready
°
Virtex®-7
-
°
Zynq-7000
-
°
7K325T and 7K410T
Defense-Grade Virtex-7Q
-
•
7Z030 and 7Z045
Defense-Grade Kintex™-7Q
-
°
7VX690T, 7VX1140T, 7VX330T, 7VX415T, 7VX980T
7V585T and 7VX485T
The following devices are General ES ready
°
Virtex-7
-
7VH580T and 7VH870T
Vivado Design Suite 2013 Release Notes
UG973 (v2013.2) June 19, 2013
www.xilinx.com
57
Vivado 2013.1
New Vivado Installer
Vivado Design Suite is now available separately from ISE® Design Suite. Both Vivado Design Suite
and ISE Design Suite now have their own independent download and installation files.
Vivado System Edition Products
Vivado High-Level Synthesis
The Vivado HLS tool has enhanced libraries with support for industry standard floating point
math.h operations and real-time video processing functions. Users now have immediate access to
video processing functions integrated into an OpenCV environment for embedded vision running
on the dual-core ARM® processing system.
•
C libraries are enhanced with a new Video library providing support for 31 video and
OpenCV Input/Output (I/O) interface functions
°
OpenCV I/O functions: cvMat2hlsMat, IplImage2hlsMat, CvMat2hlsMat,
hlsMat2cvMat, hlsMat2IplImage, hlsMat2CvMat
°
Interfaces: hls::AXIvideo2Mat, hls::Mat2AXIvideo
°
•
Video functions: hls::Filter2D, hls::Erode, hls::Dilate, hls::Min,
hls::Max, hls::MinS, hls::MaxS, hls::Mul, hls::Zero, hls::Avg,
hls::AbsDiff, hls::CmpS, hls::Cmp, hls::And, hls::Not, hls::AddS,
hls::AddWeighted, hls::Mean, hls::SubRS, hls::SubS, hls::Sum,
hls::Reduce, hls::Scale
Integration of designs into a software controlled environment is greatly eased with the
auto-generation of standalone and Linux software driver files for packaged IP
°
Supported for IP packaged for the Vivado IP catalog and the Embedded
Development Kit (EDK) (pcore) environment
•
Support is provided for designs packaged for the Vivado IP catalog allowing them to
be used in IP integrator
•
A new design analysis perspective allows designs to be quickly and intuitively analyzed
°
°
Both performance and resource metrics can be reviewed in an inter-active graphical
environment
Cross-linked windows on register-transfer level (RTL) structure and scheduled
operations can be cross-referenced with the C source and HDL output allowing
hot-spots to be identified and optimized
•
The synthesis report has been enhanced to be more intuitive and provide more design
level details for latency and initiation inter val
•
Designs packaged as IP for System Generator for DSP will simulate faster
Vivado Design Suite 2013 Release Notes
UG973 (v2013.2) June 19, 2013
www.xilinx.com
58
Vivado 2013.1
°
A cycle accurate C model is now provided as part of the IP package and
automatically used for simulation in System Generator for DSP
•
Packaging IP now generates a project file which can be directly opened in the Vivado
Design Suite
•
Assertions on variable ranges in the C sourced code are now supported for C synthesis,
enabling more optimal hardware to be created
•
AXI4 Master, Lite and Stream interfaces are now supported on SystemC designs
•
Arrays in the top-level function argument list can now be synthesized with an ap_bus I/O
protocol allowing them to be implemented as an AXI4 Master interface
System Generator for DSP
•
Support is now provided for the auto-migration of versioned IP, allowing existing
designs to be quickly updated to the latest release
•
Faster compile and netlist generation times are realized by the auto-propagation of
device and interface parameters
•
Faster simulation times are optionally available for IP created by the Vivado HLS tool
°
The simulation can use the RTL model or optionally use a faster cycle-accurate C model
of the Vivado HLS IP
Vivado Design Edition Tools
Interactive Design Environment
•
Support for bottom-up synthesis
•
Basic support for module analysis flow
•
Enhanced run “hook” scripts
°
•
Find infrastructure now issues Tcl commands
°
•
Allows customization in run flows
Improves search – and learning how to use Tcl
Schematic Editor combines vector instances
°
Simplifies schematics for busses
•
Graphical User Interface (GUI) object references update to be consistent with Tcl
objects
•
Vivado device editor
°
Ability to start from either destination or source in manual routing mode
Vivado Design Suite 2013 Release Notes
UG973 (v2013.2) June 19, 2013
www.xilinx.com
59
Vivado 2013.1
•
Design Rule Checks (DRC)
°
•
•
Bitstream Generation
°
Ability to set bitstream and other device properties in all netlist views
°
Automatically sets default settings when added
°
Constraints can be saved to target Xilinx Design Constraints (XDC)
Language Templates
°
•
New RTL and netlist linting checks
SystemVerilog for Design constructs added
Enhanced BlockRAM inference templates
Power
•
Lower dynamic power consumption out-of-the-box with no performance impact
°
Power optimization enabled in opt_design lower Block RAM dynamic power by
~40% and Core dynamic power by ~7.5%
°
Power opt design will provide incremental power saving with additional BRAM and
sequential logic optimizations
Vivado IP Integrator
To accelerate the creation of highly integrated, complex designs in All Programmable FPGA
devices, Xilinx introduces the early access release of the Vivado IP integrator. Vivado’s IP
integrator builds on the foundation of Vivado’s extensible IP catalog and standards based
approach to packaging IP to deliver intelligent correct-by-construction assembly of designs
co-optimized with Xilinx All Programmable solutions. The Vivado IP integrator environment
is a licensed early access feature in the 2013.1 release. Contact your field applications
engineer to obtain a license.
Vivado Logic Simulation
•
New driver reporting capability added to Vivado simulator which enables users to trace
current driving values for a signal type HDL object
•
Aldec Active-HDL support enabled in compile_simlib
Xilinx Intellectual Property Simulation
Behavioral simulation of Xilinx IP is now supported in the following simulators:
•
Full support
°
Mentor-Graphics: ModelSim and Questa Advanced Simulator
Vivado Design Suite 2013 Release Notes
UG973 (v2013.2) June 19, 2013
www.xilinx.com
60
Vivado 2013.1
°
•
Xilinx: Vivado Simulator
Limited support
°
Aldec: Active-HDL, Riveria-Pro
°
Cadence: Incisive Enterprise Simulator
°
Synopsys: VCS and VCS MX
Note: The phrase "Limited support" means Xilinx has encrypted our IP with the IEEE P1735 V1 public
keys for the listed vendors, but testing has been limited to ensuring the listed simulators can decrypt
the IP. Testing for “limited support” vendors has not verified that all Xilinx IP cores will fully function
in each simulator. The phrase “Full support” means listed simulators have been tested both for
decryption and simulation functionality of Xilinx IP cores.
Vivado HDL Synthesis
•
Reduced LUT utilization (by 11%) by default with the ability to leverage both outputs of
the 7 series LUT (controllable via a new -no_lc option)
•
Synthesis Settings in the user interface now includes a runtime optimized strategy
preset
•
New -directive option to replace -effort_level for shorter runtimes
•
New Design Rule Checks (DRC) in elaborated design view
°
Missed RAM templates, clocking, and more
•
New resource sharing option for arithmetic operators (-resource_sharing) to
explore advanced area/performance tradeoffs
•
Control set optimization option (-control_set_opt_threshold) to eliminate low
fanout control signals (clock enables or synchronous set/reset) and possibly obtain higher
slice utilization after implementation
Vivado Implementation
•
New -directive option to replace -effort_level for shorter runtimes and greater
control.
•
New and improved implementation strategies offer a variety of implementation approaches.
Static Timing Analysis
•
Generate a report of timing exceptions using report exceptions
•
Spread spectrum support
•
Simplified source synchronous XDC templates
•
Rounding (1ps) user inputs to avoid unexpandable clocks
•
Accounting of setup/hold requirements consistent with industry standard tools
Vivado Design Suite 2013 Release Notes
UG973 (v2013.2) June 19, 2013
www.xilinx.com
61
Vivado 2013.1
•
Enabling clock properties at output ports to enable phase support for Simultaneous
Switching Noise (SSN)
•
Improved check_timing to filter out objects whose connections do not have timing
checks
Vivado I/O Planner
•
Added SSN phase support
°
Up to 20% more margin achieved with phase information
•
New device constraints view added to enable easy editing of DCI_CASCADE and
Intern_Vref constraint
•
Enhanced software check for board design
°
Tie off information will be provided based on CFGBVS settings
Messaging
•
Better message quality
•
Advanced control of messages in Vivado Integrated Design Environment (IDE)
°
Suppression - Hide specific messages, all messages with same ID or a particular
string
°
Severity adjustment - Upgrade or downgrade severity of messages as needed
Vivado Debug
•
Faster debug and programming
°
•
Flexibility and performance for programming cable via Target Communication
Framework (TCF)
Easier to use interface
°
Easily identify and probe debug nets in enhanced net-centric Debug Window
°
Compare simultaneous ILA waveforms
°
Cascade multiple ILA cores and trigger on external test equipment
°
Manual ICON instantiation no longer required – automatically infers
°
Cross-Trigger between Processing System (PS) and Programmable Logic (PL) for
Zynq-7000 devices
Vivado Design Suite 2013 Release Notes
UG973 (v2013.2) June 19, 2013
www.xilinx.com
62
Vivado 2013.1
Integrated Vivado Serial I/O Analyzer
•
Supports IBERT 7 series GTX, GTH, GTP in IP Catalog
Device Programming Capabilities
•
Connect to JTAG cable and query the device chain
•
Directly program a Xilinx 7 series FPGA device with a BIT file
•
Check the various status registers of Xilinx 7 series FPGA devices
Note: For all other capabilities offered by Xilinx ISE Lab Tools and Xilinx ISE Design Suite, you will
need to install the standalone version of the Xilinx ISE Lab Tools
Vivado Design Suite 2013 Release Notes
UG973 (v2013.2) June 19, 2013
www.xilinx.com
63
Important Information
Important Information
Migrating Vivado Designs to Vivado Design Suite 2013.1
Table 6-1:
Specifics for Migrating Vivado Designs to Vivado Design Suite 2013.1
Change in 2013.1
Impact on Designs
Resolution
ISE Design Suite and Vivado
Design Suite are now installed
individually. Unlike the previous
combined installer, the new
Vivado installer does not include
the iMPACT and ChipScope™ Pro
Analyzer tools.
The installation of the ISE and
Vivado Design Suites must now
be managed and accessed
individually. There should be no
impact on most existing designs.
The exceptions will be designs
using the legacy ChipScope
debug cores (ICONv1.06a, ILA
v1.05a, VIO v1.05a, ChipScope
AXI Monitor) including the
following V ivado IP cores and
V ivado IP example designs:
Vivado IP cores:
• Memory Interface Generator
(MIG) 7 Series
• Soft Error Mitigation (SEM) IP
core
Vivado IP example designs:
• Common Packet Radio
Interface (CPRI™) IP core
• JESD2024 IP core
The ISE Design Suite or the ISE
Lab Tools 14.5 must be installed
and accessible in order to use
ChipScope.
To address usability and intuitive
hierarchy, connectivity IP in
Vivado Design Suite is delivered
as a core block with encrypted
HDL and GT instance.
As the IP is updated to the 2013.1
version, interface port
mismatches may appear.
IPs affected:
• QSGMII
• JESD204
• 10G PCS/PMA
• 10G EMAC
• RXAUI
• XAUI
Top-level design changes are
required and interface ports
must be changed to match the
latest port names and widths.
For more information see:
• Answer Record 55077
To aid clock and reset sharing
among multiple IP instantiations,
Xilinx IP has been redesigned to
allow sharing of common clock
and resets among multiple IP
instances.
As the IP is updated to the 2013.1
version, interface port
mismatches may appear.
IP affected:
• RXAUI in 2013.1
The top-level design changes
may be required and interface
ports must be changed to match
the latest port names and
widths.
For more information see:
• Answer Record 55078
Vivado Design Suite 2013 Release Notes
UG973 (v2013.2) June 19, 2013
www.xilinx.com
64
Important Information
Table 6-1:
Specifics for Migrating Vivado Designs to Vivado Design Suite 2013.1
Change in 2013.1
Impact on Designs
Resolution
To aid IP debugging, X ilinx IP has
been redesigned to bring
transceiver debug ports to the
top level.
As the IP is updated to the 2013.1
version, interface port
mismatches may appear.
IP affected:
• RXAUI in 2013.1
The top-level design interface
ports must be changed to match
the latest port names and
widths. See Answer Record
55079
To drive consistency across Xilinx
IP, mixed case signal names have
been changed to use all lower
case for all VHDL and
Verilog-based Xilinx cores.
As the IP is updated to the 2013.1
version, interface port name
mismatches may appear. Below
are a few examples of IPs that will
be affected by this change.
However, this mismatch may
occur with any Xilinx IP in the
2013.1 version.
Sampling of IPs affected:
• Aurora 8B/10B
• Aurora 64B/66B
• AXI Perf. Monitor
• Clocking Wizard
• SelectIO™ Wizard
• XADC Wizard
• PCIe® Gen2/Gen3
The top-level design interface
ports must be changed to match
the latest port names.
For more information see:
• Aurora 8B/10B:
Answer Record 55006
• Aurora 64B/66B:
Answer Record 55005
• AXI Memory Mapped to PCIe:
Answer Record 55086
• Select IO Wizard:
Answer Record 55001
• XADC Wizard:
Answer Record 54997
• 7 Series PCIe:
Answer Record 55084
• Virtex-7 PCIe Gen3:
Answer Record 55085
Xilinx IP in Vivado Design Suite
will now have different version
numbers than their ISE Design
Suite counterparts. All Xilinx IP in
Vivado Design Suite has moved
to a new version for 2013.1.
All Xilinx IP in Vivado Design
Suite has moved to a new version
for 2013.1. Customers using older
versions of IP may choose to
remain with the older version or
upgrade to a new version of IP.
Upgrading to new IP version
requires changes to IP
instantiations in design.
To ensure the correct operation
of the Save Constraints
command, strict checking is now
applied to XDC files to look for
unsupported Tcl commands.
As a result of this change, XDC
files that worked in 2012.4 and
earlier releases may return a
critical warning message when
the XDC file is loaded.
The Vivado Design Suite now
offers the ability to add
“un-managed” Tcl files as design
sources in constraints sets. For
more information refer to
Vivado XDC Changes, page 72,
or to Answer Record 54842.
Vivado Synthesis and
Implementation -effort directives
have been replaced.
The corresponding replacement
directives will be mapped when
runs are launched.
Rerun with the latest directives
and strategies.
XST is no longer recommended
for new Vivado designs, and is
hidden by default. XST strategies
are no longer available in the
Synthesis Settings dialogue box,
but are still available through Tcl
commands.
None. Designs with existing XST
strategies assigned will continue
to run. Xilinx IP in the Vivado
Design Suite is created and
validated using Vivado synthesis.
Some IP with constraints may
issue errors or warnings.
Select a Vivado synthesis
strategy instead of XST.
Vivado Design Suite 2013 Release Notes
UG973 (v2013.2) June 19, 2013
www.xilinx.com
65
Important Information
Vivado XDC Changes
XDC constraint files are actively managed in the project by the Vivado Design Suite, which
writes constraints to the XDC files to capture user design changes from operations like
floorplanning, physical placement, and timing constraints edited in the Vivado IDE. When
you select the File > Save Constraints or File > Save Constraints As... command, the
Vivado tool saves constraints to the XDC file – replacing the original constraint for modified
constraints, or adding it to the end of the target constraints file for new constraints. The
commands that are supported in XDC files have always been a subset of all the Vivado
commands and the Tcl built-ins. XDC files do not support string list manipulation
commands, procedures, or elaborate looping and conditionals in XDC files because the
Vivado tool is operating on a fully-expanded “in-memory” view of these constraints applied
to the design, and the tool would not be able to robustly manage and save constraints
using these constructs. The list of commands which are allowed in standard XDC files is
documented in Answer Record 54842: http://www.xilinx.com/support/answers/54842.htm.
Starting in 2013.1, the Vivado Design Suite performs additional checks looking in the XDC
files for unsupported Tcl commands. When unsupported Tcl commands are found, the
Vivado tool returns a critical warning such as:
"CRITICAL WARNING: [Designutils 20-1307] Command 'lappend', 'lindex', 'lsort', or
'concat' is not supported in the xdc constraint file ...".
However, in 2013.1, to let you use some of the advanced features of Tcl, such as list
manipulation and looping, as design constraints in your project, the Vivado Design Suite
provides a new feature called an “un-managed” Tcl source file. This feature lets you specify
a Tcl command file as a source for design constraints in a constraint set. In addition, the
script-based project-less flow has always allowed sourcing Tcl command files as general Tcl
scripts at different design stages, for example after opening a post-synthesis linked design.
Un-managed Tcl allows elaborate Tcl scripts to apply design constraints, but does not
support the File > Save Constraints command to write design changes back to the source
files. In this case the Tcl source file is un-managed.
Vivado High-Level Synthesis
•
The term throughput has been changed to Initiation Interval or Interval throughout the
documentation
°
•
This has been done to avoid confusion with design throughput which is expressed
in terms of clock cycle per second
Floating-point designs verified by ModelSim in the RTL co-simulation flow must use
libraries
°
The libraries must be compiled by the users for the particular version of ModelSim
being used
Note: Details on how to perform this are provided in the documentation
Vivado Design Suite 2013 Release Notes
UG973 (v2013.2) June 19, 2013
www.xilinx.com
66
Important Information
•
There is no longer a requirement to differentiate SystemC design and C/C++ designs, the
–type option to the add_files command has been removed
Vivado IP Versioning Changes
•
The version format and strategy will be unified across all Xilinx IP
°
°
•
The format will be Major.Minor (Revision)
-
Major - major interface change and behavior changes
-
Minor – small behavior or interface changes (one or two ports change)
-
Revision – no behavior changes
All IP references will be based on the Major.Minor fields only
Only the latest version of a given IP can be generated from the IP catalog
°
Older versions will no longer be available
°
Existing output products from older versions, which already exist on disk can always
be re-used
°
Modifications or generation of a removed IP will require the IP to be upgraded first
Updates to Existing IP
•
•
•
Aurora 64B/66B (v8_0)
°
GTH support & hardware (HW) validation
°
Vivado only Core (Legacy Free)
°
Lower case to ports
°
Native Vivado simulator/MTI support
Aurora 8B/10B (v9_0)
°
GTP/GTH support & HW validation
°
Vivado only Core (Legacy Free)
°
Lower case to ports
°
Native Vivado simulator/MTI support
PCI Express® Gen3/Gen2
°
Updated GT wrappers
°
Inter-processor interrupt (
°
IPI) Level 0 support
°
Added Root Port support
Vivado Design Suite 2013 Release Notes
UG973 (v2013.2) June 19, 2013
www.xilinx.com
67
Important Information
•
Added support for Zynq 7030 and 7045 devices
•
10G Ethernet MAC
•
•
•
•
°
New hierarchy structure
°
Separate XDC files for core and example design
XAUI
°
New hierarchy structure
°
Separate XDC files for core and example design
°
Updated GTP and GTH transceiver files
RXAUI
°
New hierarchy structure and clocking and reset modules
°
Separate XDC files for core and example design
°
Updated GTP transceiver files
10G Ethernet PCS/PMA (10GBASE-R/10GBASE-KR)
°
New hierarchy structure and clocking and reset modules
°
Separate XDC files for core and example design
°
Updated GTX and GTH transceiver files
°
Tri-Mode Ethernet MAC
°
Kintex-7 production
1000BASE-X/SGMII
°
•
QSGMII
°
•
Virtex-7 production
PCI32 and PCI64
°
•
IP Integrator support for 7 series and Zynq-7000
SPI-4.2
°
•
Updated auto-negotiation logic
AXI Ethernet
°
•
Updated GTP transceiver files
GMII to RGMII
°
•
Updated GTP and GTH transceiver files
Kintex-7 production
For a detailed list of Xilinx IP Cores, see the IP Release Notes Guide (XTP025) [Ref 1]
Vivado Design Suite 2013 Release Notes
UG973 (v2013.2) June 19, 2013
www.xilinx.com
68
Known Issues
Known Issues
Vivado™ Design Suite Tools Known Issues can be found at Answer Record 5512
Vivado Design Suite 2013 Release Notes
UG973 (v2013.2) June 19, 2013
www.xilinx.com
69
Appendix A
Additional Resources
Xilinx Resources
For support resources such as Answers, Documentation, Downloads, and Forums, see the
Xilinx® Support website at:
www.xilinx.com/support.
For a glossary of technical terms used in Xilinx documentation, see:
www.xilinx.com/company/terms.htm.
Solution Centers
See the Xilinx Solution Centers for support on devices, software tools, and intellectual
property at all stages of the design cycle. Topics include design assistance, advisories, and
troubleshooting tips.
Xilinx Documentation Navigator
You can view Xilinx tool and hardware documentation in the Xilinx Documentation
Navigator or on the Xilinx website. The Documentation Navigator is integrated with the
Vivado™ Design Suite and it provides a catalog of Xilinx documentation and videos.
For more information about the Documentation Navigator, see the Vivado Design Suite User
Guide: Getting Started (UG910).
Vivado Design Suite 2013 Release Notes
UG973 (v2013.2) June 19, 2013
www.xilinx.com
70
Licenses and End User License Agreements
Licenses and End User License Agreements
The third-party licenses govern the use of certain third-party technology included in and/or
distributed in connection with the Xilinx design tools. Each license applies only to the
applicable technology expressly governed by such license and not to any other technology.
You must accept the terms of the End User License Agreements (EULAs) for Xilinx design
tools and third-party products before license files can be generated.
To view the third-party license details and EULA, see
http://www.xilinx.com/cgi-bin/docs/rdoc?v=2013.2;d=ug763_tplg.pdf.
To view the Xilinx design tools license details and EULA, see
http://www.xilinx.com/cgi-bin/docs/rdoc?v=2013.2;d=end-user-license-agreement.pdf.
References
1. Vivado Design Suite User Guide: Logic Simulation (UG900)
2. IP Release Notes Guide (XTP025)
3. USB Cable Installation Guide (UG344)
4. Platform Cable USB II Data Sheet (DS593)
5. Parallel Cable IV Data Sheet (DS097)
6. Xilinx Download Center (http://www.xilinx.com/support/download/index.htm)
7. Xilinx Design Tools WebTalk page (http://www.origin.xilinx.com/ise/webtalk/)
8. Vivado Design Suite Video Tutorials (http://www.xilinx.com/training/vivado/index.htm)
9. Vivado Design Suite Documentation
(www.xilinx.com/support/documentation/dt_vivado2013-1.htm)
Vivado Design Suite 2013 Release Notes
UG973 (v2013.2) June 19, 2013
www.xilinx.com
71
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement