DTS MOS Green Certificate of Conformance

DTS MOS Green Certificate of Conformance
AVS.4.12.14045CC-30
Issuing Center: ANTWERP
Page 1/2
VERITAS
CERTIFICATE OF CONFORMITY
To ICAO Annex 14 - Fifth Edition - Current edition
(Standards and recommended practices)
To ICAO Aerodrome Design Manual - Part 4
To IEC TS 61827
Products: AD Lights type DTS xxxxxxxxx for straight sections
Green LED according to Manual of Standards Part 139 Aerodromes - Australia
Manufactured by ADB
Applications: LED Taxiway Centre Line High Intensity BilUni-directionallnset
lights and Runway turn pad lights
- were found in conformity with:
• the catalogue sheet A.04.51 0
• the ICAO Annex 14 - Volume I - §5.3.16 & 5.3.18 for light output
• . IEC TS 61827 "Electrical installations for lighting and beaconing of
aerodromes- Characteristics of inset and elevated luminaires used on
aerodromes and heliports"
• Manual of Standards Part 139 - Aerodromes - Australia
- Date of inspection: November 12th, 2013.
- and have been, upon request of:
ADB
Leuvensesteenweg, 585
B -1930 ZAVENTEM - BELGIUM
- inspected in conformity with the applicable requirements of
• the catalogue sheets A. 04.510
• the ICAO Annex 14 - Volume I - §5.3.16 & 5.3.18 for light output
• IEC TS 61827
• Manual of Standards Part 139 - Aerodromes - Australia
4·1, ~
Issued at Antwerp, November 12th, 2013
Rudi Vandenbempt
Inspector Industry
BUREAU VERITAS ANTWERP
This certificate is only valid for a period of 5 years from the issuance date, as far as no changes of
production process, equipment characteristics nor of applicable requirements occurs during this
period of validity
AVS.4.12.14045CC-30
Issuing Center: ANTWERP
Page 2/2
VERITAS
Particulars of inspection: detailed hereafter
The following survey operations have been carried out without noticeable remark:
•
•
Attendance to tests at the Laboratory premises of the manufacturer:
o Examination of test equipment
o Checking of installation of units before testing
o Attendance to photometric tests per applicable procedures and method
o Attendance to the Colorimetric tests per applicable procedure & method
Test results are detailed in the attached test records.
CONCLUSION
Taking into account the satisfactory results of actual tests and exam inations we confirm
that the manufacturing and the test results for the above specified units are in
conformity with applicab le standards, specifications and data sheets.
(Details of standards and specifications are indicated on page 1 of this certificate and
data sheet as per catalogue).
ENCLOSURE
Test records of testing which have been attended, duly stamped for identification by
BUREAU VERITAS:
Test reports include:
• Results of intensity values inside the beam
• Isocandela curves
• Colorimetry
Rudi Vandenbempt
Inspector Ind ustry
BUREAU VERITAS ANTWERP
This certificate is only valid for a period of 5 years from the issuance date, as far as no changes of
production process, equipment characteristics nor of applicable requirements occurs during this
period of validity
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement