High Temp Catalog 01282015

High Temp Catalog 01282015
HIGH TEMPERATURE
SOLUTIONS
www.avx.com
Tantalum Capacitors | Ceramic Capacitors
Glass Capacitors | EMI Filters
Circuit Protection | NTC Thermistors
Version 15.3
Table of Contents
Introduction
Product Line
2
3-6
TANTALUM CAPACITORS
THJ Series
THJ+ Series
TWC-Y Wet Tantalum Series
TWA-Y Wet Tantalum Series
THH Hermetic Series
-55°C to +175°C
-55°C to +200°C
-55°C to +200°C
-55°C to +200°C
-55°C to +230°C
8-11
12-14
15-16
17-20
21-24
-55°C to +250°C
-55°C to +150°C
-55°C to +150°C
-55°C to +150°C
-55°C to +150°C
26-30
31-33
34-37
38-41
42-47
CERAMIC CAPACITORS
AT Series
X8R/X8L MLCC
MLCC with Flexiterm®
MLCC Tin/Lead Termination “B”
Radial Leads/SkyCap® AR Series
SWITCHED MODE POWER SUPPLY (SMPS)
SMX
SXP
-55°C to +200°C
-55°C to +200°C
49-52
53-54
75°C to +200°C
56-61
-55°C to +175°C
-55°C to +175°C
63-66
67-70
GLASS DIELECTRIC
ET Series Glass Capacitors
RF/MICROWAVE MLCCs
AQ
SQCB
CIRCUIT PROTECTION & SIGNAL INTEGRITY
CANAT
VR15
-55°C to +150°C
-55°C to +150°C
72-75
76-77
-55°C to +150°C
-55°C to +150°C
-55°C to +150°C
-55°C to +150°C
-55°C to +150°C
79-80
81-82
83-84
88-92
93
-55°C to +200°C
95
NTC THERMISTORS
NB 12-20
NB 21-23
NC 12-20
ND/NE/NV
NJ/NI/NK
ADVANCED TECHNOLOGY FILTERS
WQ / XQ / YQ / ZQ
APPLICATION NOTES
Down-hole Applications Notes
97-99
www.avx.com | 1
INTRODUCTION
AVX is the world’s leading
manufacturer of passive electronic
components. The demands for
components used in extreme
environmental conditions continue
to grow considerably. The evolution
of temperature critical applications
are generating the need for
components capable of enduring
temperatures approaching or
exceeding 250°C. AVX provides an
array of components that fulfill these
stringent requirements. Specific
dielectric materials, construction
methods and testing procedures
are used to achieve exceptional high
temperature performance. Advanced
designs and testing capabilities at
AVX provide the necessary tools to
incorporate these components into
high temperature applications such
as down-hole oil exploration,
aerospace and military equipment.
For new designs
or applications
please contact AVX at:
[email protected]
A KYOCERA GROUP COMPANY
Product Line
TANTALUM CAPACITORS
THJ and THJ+ Series Capacitors
• 1st SMD +175°C tantalum capacitor on the market
• SMD = small size, fast pick & place ready
• Negative temperature operation
(unlike wet electrolytics)
• 3x reflow +260°C and RoHS compliant
• Gold plated termination for hybrid assembly
• 200°C option available as THJ+ Series
+175°C and +200°C
Operating Temp
-55ºC to +175ºC (THJ)
-55ºC to +200ºC (THJ+)
Case Size
1206 - 2917
Voltage
6.3V - 50V
Capacitance
0.1μF - 220μF
TWC-Y High Temperature Wet Tantalum Capacitors
• Hermetically Sealed Axial Leaded Tantalum Case
• Standard Case Sizes: T1-T4 per M39006
• Surge Resistant
• Meets Shock & Vibration per MIL-STD-202, Method
213 & 204
• Capable of Continuous Operation at 200°C with 60%
rated voltage for most values rated for 500 hours
+200°C
Operating Temp
Case
Voltage
Capacitance
TWA-Y High Temperature Wet Tantalum Capacitors
• Capable of withstanding life test up to 2000 hours
at 200°C on selected values
• Hermetically sealed to withstand hard shock
and vibration
• High capacitance cathode systems allows high level
of CV in standard case sizes
-55ºC to +200ºC
Axial T1 - T4
6V - 125V
22μF - 560μF
+200°C
Operating Temp
Case
Voltage
Capacitance
-55ºC to +200ºC
Axial T1 - T4
50V - 125V
22μF - 750μF
COMING SOON
THH Hermetic Series Capacitors
• World's first 230°C rated Tantalum capacitor
• Hermetically sealed SMD tantalum capacitors
• THH - Rated temperature up to 230°C
• Stability under humidity and ambient atmosphere
• Large case sizes including CTC-21D provide high
capacitance values
+230°C
Operating Temp
Case Size
Voltage
Capacitance
-55ºC to +230ºC
9 (CTC-21D), I
16V - 63V
3.3μF - 470μF
www.avx.com | 3
Product Line
MLCC CERAMIC CAPACITORS
AT Series
200ºC and 250ºC
• High temperature C0G and VHT dielectrics
• Tested to MIL-STD-202
• Ideally suited for high temperature applications up to
+250°C.
• Life tested to 1000hrs @ 200% rated voltage and
+250°C.
• High current handling, volumetric efficiency, and insulation resistance.
• Very low ESR/ESL.
• Pd / Ag and 100% Tin Plated (RoHS Compliant)
terminations available.
Operating Temp
Case Size
Voltage
Capacitance
X8R/X8L MLCC
+150°C
• Designed for use in applications up to 150ºC
• Excellent reliability compared to other capacitor
technologies
• Low ESR / ESL compared to other technologies
• Tin solder finish
• FLEXITERM® available
• Epoxy termination for hybrid available
• Qualified to the highest automotive AEC-Q200
standards
Operating Temp
Case Size
Voltage
Capacitance
MLCC with FLEXITERM®
• Flexible termination system able to withstand 5mm
bend test guaranteed.
• Available with X8R dielectric for high temperature
applications.
• Increased temperature cycling performance, 3000
cycles and beyond.
• Reduction in circuit board flex failures.
• Base metal electrode system.
• Automotive or commercial grade products available.
• MLCC with Tin/Lead Terminations
• Available with NP0 (C0G) and X8R dielectrics for
high temperature applications.
Operating Temp
Case Size
Voltage
Capacitance
-55ºC to +150ºC
0603 - 1206
25 - 50V
270pF - 0.47μF
+150°C
Operating Temp
Case Size
Voltage
Capacitance
Radial Leads/SkyCap® AR Series
• Conformally Coated Radial Leaded MLCC
• Available with C0G (NP0), X7R and X8R Dielectric
• Rated to 3000, 2000, 1000, 200, 100, 50 Volts
• Epoxy case material
• 100% Tin leads
• Qualified to AEC-Q200, PPAP Available
-55ºC to +150ºC
0603 - 1206
16 - 100V
330pF - 1μF
+150°C
MLCC with Tin/Lead Termination “B”
4 | www.avx.com
-55°C to +250°C
0805 - 2220
16 - 50V
100pF - 1μF
-55ºC to +150ºC
0402 - 2220
16 - 500V
0.5pF - 0.47μF
+150°C
Operating Temp
Lead Spacing
Voltage
Capacitance
-55ºC to +150ºC
0.20 - 0.40 inches
50 - 200V
1pF - 0.33μF
Product Line
SWITCHED MODE POWER SUPPLY (SMPS)
SMX Style Stacked MLC Capacitors
• Ideally suited for high temperature applications up
to 200ºC
• Very low ESR and ESL
• Excellent capacitance retention with frequency
•Excellent high frequency performance
• Low DC leakage current
• High current handling capabilities
• Custom configurations are available such as unique
geometries, lead configurations, packaging, and
stress relief mounting options.
+200°C
Operating Temp
Case Size
Voltage
Capacitance
SXP Style SMPS MLC Capacitors
• Low ESR, low ESL
• Low DC leakage
• Excellent high frequency performance
• Ideally suited for high temperature applications
up to 200ºC
• Excellent mechanical protection suitable for extreme
harsh environment
-55ºC to +200ºC
SMX 1 - 6
25 - 500V
0.0039 - 340μF
+200°C
Operating Temp
Case Size
Voltage
Capacitance
-55ºC to +200ºC
SXP 1 - 4
50 - 1000V
100pF - 10μF
GLASS DIELECTRIC
ET Series Glass Capacitors
• Glass dielectric
• Working temperature range -75°C to 200°C
• Simple, rugged design and construction
• Available in both axial and radial leaded
configurations
• Values from 0.5 pF to 2400 pF
+200°C
Operating Temp
Case Size
Voltage
Capacitance
-75ºC to +200ºC
ET06 - ET15
50V
0.5pF - 2400pF
RF/MICROWAVE MLCCs
AQ Series
+175°C
• High current carrying capabilities
• High quality factors
• Very low ESR
• Very high series resonance
• Excellent stability under stresses of changing voltage
Operating Temp
Case Size
Voltage
Capacitance
SQCB Series
-55ºC to +175ºC
0605 - 1210
50 - 500V
0.1pF - 5100pF
+175°C
• Low ESR
• High Q
• High Self Resonance
• Capacitance Range 0.1 pF to 5100 pF
• 175ºC Capability (+90 ± 30 PPM/ºC Dielectric)
Operating Temp
Case Size
Voltage
Capacitance
-55ºC to +175ºC
1210
50 - 500V
0.1pF - 5100pF
www.avx.com | 5
Product Line
CIRCUIT PROTECTION & SIGNAL INTEGRITY
High Temperature Automotive
• Rated at 150°C
• ESD rating up to 25kV contact
• Low capacitance for capacitance sensitive
applications - RF, antennas, data lines
• EMI/RFI attenuation in off state
• AEC Q200 qualified
+175°C
Operating Temp
-55ºC to +150ºC
Case Size
0603 to 0612
4x array
Voltage
18V - 32V
Capacitance
10 - 22pF
Radial Leaded High Temperature Automotive
• Rated at 150°C
• Epoxy encapsulated for harsh environment
• EMI/RFI attenuation in off state
• Excellent current and energy handling
• AEC Q200 qualified
+175°C
Operating Temp
Size
Voltage
Energy
Peak Current
-55ºC to +150ºC
VR15, VR20
14V - 48V
0.1 - 2.0J
30 - 120A
NTC THERMISTORS
SMT NTC Thermistors
• Rated to 150°C
• Wide resistance range
• Fast thermal response
• Ni Barrier/100% Sn and PdPtAg termination options
• AEC Q200 qualified, custom hi-rel testing
+150°C
Operating Temp
Case Size
Voltage
Capacitance
Leaded and Leadless NTC Thermistors
• Rated at 150°C
• Leaded disc or high accuracy bead NTC
• Various coating options and configurations
• Leadless options – metallized disc or high
accuracy chip
• Fast response, excellent reliability
• AEC-Q200 qualified, custom hi-rel testing
-55ºC to +150ºC
0603 - 1206
18Ω - 1MΩ
3250 - 4500K
+150°C
Operating Temp
Disc Size
Resistance
B value (25/85)
Tolerance
-55ºC to +150ºC
2.4mm - 9mm
68Ω - 1MΩ
3250 - 4840K
From ±1%
ADVANCED TEHCNOLOGY FILTERS
Hermertic High Temperature Solder-Ins
• Fully Hermetic design
• 400°C installation temperature
• -55°C to +200°C operating temperature
• Epoxy free construction
• MIL-PRF-31033 Discoidal Capacitor
• Custom designs available.
Contact AVX at [email protected]
6 | www.avx.com
+200°C
Operating Temp
Case Size
Voltage
Capacitance
-55ºC to +200ºC
WQ/XQ/YQ/ZQ
20 - 300V
10pF - 1.4mF
TANTALUM
CAPACITORS
AVX is a worldwide leading supplier
of tantalum capacitors. Tantalum
capacitors provide high capacitance,
high reliability, stable electrical
performance under high temperature
and and no piezo noise effect.
Some of the innovative solutions
include:
• THJ Series
High temperature tantalum chip
capacitors rated up to 175ºC.
Capacitance ranges from 0.1μF
to 220μF with voltage ratings
up to 50V.
• THJ Series with Extension
to 200ºC
An extension of the THJ series,
these SMD tantalum capacitors
are rated up to 200ºC with
capacitance ranging from 10μF
to 220μF.
• TWC-Y Wet Tantalum
The TWC-Y high temperature
series represents a COTS-Plus
version of conventional wet
electrolytic tantalum capacitors
that are designed for use at 200°C.
The components listed are now
capable of 500 hours of operation
at extreme temperature with the
applicable derated voltage.
• TWA-Y Wet Tantalum
Coming Soon
Wet electrolytic tantalum
capacitors with a hermetic
welded tantalum can and header
assembly and 200°C operating
temperature rating. Contact
factory for customized options.
• THH 230ºC Hermetic Series
High temperature SMD tantalum
capacitors with ceramic hermetic
seal. These components are
rated for up to 230ºC operating
temperature up to 1000 hours at
50% rated voltage, and 200°C
up to 10,000 hours at 50% rated
voltage on selected codes.
A KYOCERA GROUP COMPANY
High Temperature Tantalum Chip Capacitor
THJ Series
FEATURES
• Improved reliability – 2x standard
• 175°C @ 0.5VR continuous operation
• CV range: 0.10-220μF / 6.3-50V
• 5 case sizes available
• Low ESR options on approval
• High temperature automotive and industry applications
LEAD-FREE COMPATIBLE
COMPONENT
SnPb termination option is not
RoHS compliant.
APPLICATIONS
• Automotive ECU and ABS control electronics
• Geothermal instrumentation
CHECK FOR UP-TO-DATE DATASHEET AT
http://www.avx.com/docs/catalogs/thj.pdf
CASE DIMENSIONS: millimeters (inches)
EIA
Code
Code
EIA
Metric
L±0.20
(0.008)
W+0.20 (0.008)
-0.10 (0.004)
H+0.20 (0.008)
–0.10 (0.004)
W1 ±0.20
(0.008)
A+0.30 (0.012)
-0.20 (0.008)
S Min.
MARKING
A
1206 3216-18 3.20 (0.126)
1.60 (0.063)
1.60 (0.063)
1.20 (0.047)
0.80 (0.031)
1.10 (0.043)
B
1210 3528-21 3.50 (0.138)
2.80 (0.110)
1.90 (0.075)
2.20 (0.087)
0.80 (0.031)
1.40 (0.055)
A, B, C, D, E CASE
C
2312 6032-28 6.00 (0.236)
3.20 (0.126)
2.60 (0.102)
2.20 (0.087)
1.30 (0.051)
2.90 (0.114)
D
2917 7343-31 7.30 (0.287)
4.30 (0.169)
2.90 (0.114)
2.40 (0.094)
1.30 (0.051)
4.40 (0.173)
E
2917 7343-43 7.30 (0.287)
4.30 (0.169)
4.10 (0.162)
2.40 (0.094)
1.30 (0.051)
4.40 (0.173)
AVX LOGO
Polarity
Band
(Anode+)
Capacitance Value in pF
227 = 220μF
227 A
Rated Voltage Code
A = 10V
XXXXX
W1 dimension applies to the termination width for A dimensional area only.
ID Code
HOW TO ORDER
THJ
B
105
Type
Case Size
See table
above
Capacitance Code
pF code: 1st two
digits represent
significant figures
3rd digit represents
multiplier (number of
zeros to follow)
*
035
R
JN
—
Tolerance
K=±10%
M=±20%
Rated DC Voltage
006=6.3Vdc
010=10Vdc
016=16Vdc
020=20Vdc
025=25Vdc
035=35Vdc
050=50Vdc
Packaging
R = Pure Tin 7" Reel
S = Pure Tin 13" Reel
A = Gold Plating 7" Reel
B = Gold Plating 13" Reel
H = Tin Lead 7" Reel
Standard
Suffix
OR
Additional
characters may be
added for special
requirements
V = Dry pack Option
(selected codes only)
(Contact Manufacturer)
Low ESR
in mΩ
K = Tin Lead 13" Reel
(Contact Manufacturer)
0100
H, K = Non RoHS
TECHNICAL SPECIFICATIONS
Technical Data:
Capacitance Range:
Capacitance Tolerance:
Rated Voltage (VR)
Category Voltage (VC)
Category Voltage (VC)
Surge Voltage (Vs)
Surge Voltage (Vs)
Surge Voltage (Vs)
Temperature Range:
Reliability:
Termination Finish:
8 | www.avx.com
ⱕ +85°C:
ⱕ +125°C:
ⱕ +175°C:
ⱕ +85°C:
ⱕ +125°C:
ⱕ +175°C:
All technical data relate to an ambient temperature of +25°C
0.10 μF to 220 μF
±10%; ±20%
6.3
10
16
20
25
35
50
4
7
10
13
17
23
33
3
5
8
10
12
17
25
8
13
20
26
32
46
65
5
8
13
16
20
28
40
4
6
10
12
15
21
30
-55ºC to 175°C voltage derating.
0.5% per 1000 hours at 85°C, VR with 0.1Ω/V series impedance,
60% confidence level, 3.5 Fits at 40°C, 0.5VR
Sn Plating (standard), Gold Plating available on request
Meets requirements of AEC-Q200
High Temperature Tantalum Chip Capacitor
THJ Series
CAPACITANCE AND RATED VOLTAGE RANGE
(LETTER DENOTES CASE SIZE)
Capacitance
μF
Code
0.10
104
0.15
154
0.22
224
0.33
334
0.47
474
0.68
684
1.0
105
1.5
155
2.2
225
3.3
335
4.7
475
6.8
685
10
106
15
156
22
226
33
336
47
476
68
686
100
107
150
157
220
227
6.3V (J)
10V (A)
Rated voltage (VR ) to 85°C (Voltage Code)
16V (C)
20V (D)
25V (E)
A
A
A
A
A
A
A
B
B
B
C
C
D
D
A
A
A
A/B
B
B
C
C
D
D
A
A
A/B
A/B
B
B
C, C(500)
C
C/D
D
E
B, B(1500)
B
C
C
C
D
D
D
35V (V)
A
A
A
A
B
B
A/B
C
C
C
C
D
D
D
D, D(300)
E
50V (T)
D
D
D
D/E
E
Available Ratings, (ESR ratings in mOhms in brackets)
Engineering samples - please contact manufacturer
*Codes under development - subject to change
Note: Voltage ratings are minimum values. AVX reserves the right to supply
higher ratings in the same case size, to the same reliability standards.
www.avx.com | 9
High Temperature Tantalum Chip Capacitor
THJ Series
RATINGS & PART NUMBER REFERENCE
AVX
Part No.
Case Capacitance
Size
(μF)
Rated
Voltage
(V)
Rated
Category Category
Temperature Voltage Temperature
(ºC)
(V)
(ºC)
THJA475*006#JN
THJA685*006#JN
THJA106*006#JN
THJB156*006#JN
THJB226*006#JN
THJB336*006#JN
THJC476*006#JN
THJC686*006#JN
THJD107*006#JN
THJD157*006#JN
A
A
A
B
B
B
C
C
D
D
4.7
6.8
10
15
22
33
47
68
100
150
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
6.3
85
85
85
85
85
85
85
85
85
85
THJA335*010#JN
THJA475*010#JN
THJA685*010#JN
THJA106*010#JN
THJB106*010#JN
THJB156*010#JN
THJB226*010#JN
THJC336*010#JN
THJC476*010#JN
THJD686*010#JN
THJD107*010#JN
THJE227*010#JN
A
A
A
A
B
B
B
C
C
D
D
E
3.3
4.7
6.8
10
10
15
22
33
47
68
100
220
10
10
10
10
10
10
10
10
10
10
10
10
85
85
85
85
85
85
85
85
85
85
85
85
THJA225*016#JN
THJA335*016#JN
THJA475*016#JN
THJB475*016#JN
THJA685*016#JN
THJB685*016#JN
THJB106*016#JN
THJB156*016#JN
THJC226*016#JN
THJC226*016#0500
THJC336*016#JN
THJC476*016#JN
THJD476*016#JN
THJD686*016#JN
THJE107*016#JN
A
A
A
B
A
B
B
B
C
C
C
C
D
D
E
2.2
3.3
4.7
4.7
6.8
6.8
10
15
22
22
33
47
47
68
100
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
85
85
85
85
85
85
85
85
85
85
85
85
85
85
85
THJA155*020#JN
THJB335*020#JN
THJC156*020#JN
THJD336*020#JN
A
B
C
D
1.5
3.3
15
33
20
20
20
20
85
85
85
85
THJA474*025#JN
THJA684*025#JN
THJA105*025#JN
THJB225*025#JN
THJB225*025#1500
THJC685*025#JN
THJC106*025#JN
THJD226*025#JN
THJD336*025#JN
A
A
A
B
B
C
C
D
D
0.47
0.68
1.0
2.2
2.2
6.8
10
22
33
25
25
25
25
25
25
25
25
25
85
85
85
85
85
85
85
85
85
THJA104*035#JN
THJA154*035#JN
THJA224*035#JN
THJA334*035#JN
THJB474*035#JN
THJB684*035#JN
THJA105*035#JN
THJB105*035#JN
THJC155*035#JN
THJC225*035#JN
THJC335*035#JN
THJC475*035#JN
THJD685*035#JN
THJD106*035#JN
THJD156*035#JN
A
A
A
A
B
B
A
B
C
C
C
C
D
D
D
0.1
0.15
0.22
0.33
0.47
0.68
1.0
1.0
1.5
2.2
3.3
4.7
6.8
10
15
35
35
35
35
35
35
35
35
35
35
35
35
35
35
35
85
85
85
85
85
85
85
85
85
85
85
85
85
85
85
10 | www.avx.com
6.3 Volt @ 85°C
3
175
3
175
3
175
3
175
3
175
3
175
3
175
3
175
3
175
3
175
10 Volt @ 85°C
5
175
5
175
5
175
5
175
5
175
5
175
5
175
5
175
5
175
5
175
5
175
5
175
16 Volt @ 85°C
8
175
8
175
8
175
8
175
8
175
8
175
8
175
8
175
8
175
8
175
8
175
8
175
8
175
8
175
8
175
20 Volt @ 85°C
10
175
10
175
10
175
10
175
25 Volt @ 85°C
12
175
12
175
12
175
12
175
12
175
12
175
12
175
12
175
12
175
35 Volt @ 85°C
17
175
17
175
17
175
17
175
17
175
17
175
17
175
17
175
17
175
17
175
17
175
17
175
17
175
17
175
17
175
DCL
(μA)
Max.
DF
%
Max.
ESR
Max. (Ω)
@ 100kHz
MSL
100kHz RMS Current (mA)
0.5
0.5
0.6
0.9
1.4
1.9
3.0
4.3
6
9.5
6
4.5
4.5
6
6
6
6
6
4.5
6
6
2.6
2.2
2.5
2.5
2.2
1.6
1.5
0.4
0.9
0.5
0.5
0.7
1
1
1.5
2.2
3.3
4.7
6.8
10
22
6
4.5
4.5
6
4.5
4.5
6
6
4.5
4.5
6
10
0.5
0.5
0.8
0.8
1.1
1.1
1.6
2.4
3.5
3.5
5.3
7.5
7.5
10.9
16
25ºC
85ºC
125ºC
175ºC
1
1
1
1
1
1
1
1
1
1
112
170
185
184
184
197
262
271
612
408
101
153
166
166
166
177
236
244
551
367
45
68
74
74
74
79
105
108
245
163
22
34
37
37
37
39
52
54
122
82
5.5
2.9
2.6
2.7
1.8
1.5
2.4
1.6
0.5
0.4
0.9
0.5
1
1
1
1
1
1
1
1
1
1
1
11)
117
161
170
167
217
238
188
262
469
612
408
574
105
145
153
150
196
214
169
236
422
551
367
517
47
64
68
67
87
95
75
105
188
245
163
230
23
32
34
33
43
48
38
52
94
122
82
115
6
6
4.5
6
6
6
6
6
6
4.5
6
6
6
4.5
8
6.5
5
2.9
3.5
3.5
2.5
2.8
2
1.6
0.5
1.5
0.9
0.9
0.9
0.4
1
1
1
1
1
1
1
1
1
1
1
1
1
1
11)
107
122
161
156
146
184
174
206
262
469
271
371
408
408
642
97
110
145
140
132
166
157
186
236
422
244
334
367
367
578
43
49
64
62
59
74
70
82
105
188
108
148
163
163
257
21
24
32
31
29
37
35
41
52
94
54
74
82
82
128
0.5
0.7
3.0
6.6
6
6
6
6
6.5
3
1.7
0.9
1
1
1
1
107
168
254
408
97
151
229
367
43
67
102
163
21
34
51
82
0.5
0.5
0.5
0.6
0.6
1.7
2.5
5.5
8.3
4
4
3
6
6
6
6
6
6
14
10
5.2
4.5
1.5
2
1.8
0.9
0.9
1
1
1
1
1
1
1
1
1
73
87
120
137
238
235
247
408
408
66
78
108
124
214
211
222
367
367
29
35
48
55
95
94
99
163
163
15
17
24
27
48
47
49
82
82
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.8
1.2
1.6
2.4
3.5
5.3
4
4
4
4
4
4
4
4
6
6
6
6
6
6
6
24
21
18
15
10
8
7.5
6.5
4.5
3.5
2.5
2.2
1.3
1
0.9
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
56
60
65
71
92
103
100
114
156
177
210
224
340
387
408
50
54
58
64
83
93
90
103
141
160
189
201
306
349
367
22
24
26
28
37
41
40
46
63
71
84
89
136
155
163
11
12
13
14
18
21
20
23
31
35
42
45
68
77
82
High Temperature Tantalum Chip Capacitor
THJ Series
RATINGS & PART NUMBER REFERENCE
AVX
Part No.
Case Capacitance
Size
(μF)
Rated
Voltage
(V)
Rated
Category Category
Temperature Voltage Temperature
(ºC)
(V)
(ºC)
THJD226*035#JN
THJD226*035#0300
THJE336*035#JN
D
D
E
22
22
33
35
35
35
85
85
85
THJD335*050#JN
THJD475*050#JN
THJD685*050#JN
THJD106*050#JN
THJE106*050#JN
D
D
D
D
E
3.3
4.7
6.8
10
10
50
50
50
50
50
85
85
85
85
85
17
175
17
175
17
175
50 Volt @ 85°C
25
175
25
175
25
175
25
175
25
175
DCL
(μA)
Max.
DF
%
Max.
ESR
Max. (Ω)
@ 100kHz
MSL
100kHz RMS Current (mA)
7.7
7.7
11.6
6
6
6
0.6
0.3
0.5
1.7
2.4
3.4
5
5
6
6
6
6
6
1.1
0.9
0.7
0.7
0.7
25ºC
85ºC
125ºC
175ºC
1
1
11)
500
707
574
450
636
517
200
283
230
100
141
115
1
1
1
1
11)
369
463
408
463
486
332
417
367
417
437
148
185
163
185
194
74
93
82
93
97
11) Dry pack option (see How to order) recommended for reduction of stress during soldering. Dry pack parts should be treated as MSL 3.
Moisture Sensitivity Level (MSL) is defined according to J-STD-020
All technical data relates to an ambient temperature of +25°C. Capacitance and DF are measured at 120Hz, 0.5V RMS with a maximum DC bias of 2.2 volts.
DCL is measured at rated voltage after 5 minutes.
The EIA & CECC standards for low ESR Solid Tantalum Capacitors allow an ESR movement to 1.25 times catalogue limit post mounting.
NOTE: AVX reserves the right to supply a higher voltage rating or tighter tolerance part in the same case size, to the same reliability standards.
THJ 175°C Voltage vs Temperature Rating
120%
100%
100%
100%
100%
80%
80%
60%
Rated range
66%
50%
40%
20%
0%
-55°C
0°C
40°C
60°C
85°C
105°C
125°C
175°C
QUALIFICATION TABLE
TEST
Endurance
Storage Life
Biased
Humidity
Temperature
Stability
Surge
Voltage
THJ series (Temperature range -55ºC to +175ºC)
Characteristics
Visual examination
no visible damage
Determine after application of rated voltage for 2000
+48/-0 hours at 85±2ºC and then leaving 1-2 hours at
DCL
1.25 x initial limit
room temperature. Also determine of 175ºC temperaΔC/C
within
±10% of initial value
ture, category voltage for 2000 +48/-0 hours and
DF
initial limit
then leaving 1-2 hours at room temperature. Power
supply impedance to be ≤0.1Ω/V.
ESR
1.25 x initial limit
Visual examination
no visible damage
DCL
1.25 x initial limit
175ºC, 0V, 2000h
ΔC/C
within ±10% of initial value
DF
initial limit
ESR
1.25 x initial limit
Visual examination
no visible damage
DCL
2 x initial limit
Determine after leaving for 1000 hours at 85±2ºC,
85% relative humidity and rated voltage and then
ΔC/C
within ±10% of initial value
recovery 1-2 hours at room temperature.
DF
1.2 x initial limit
ESR
1.25 x initial limit
Condition
Step
1
2
3
4
5
6
Temperature°C
+20±2
-55+0/-3
+20±2
+85+3/-0
+175+3/-0
+20±2
Duration(min)
15
15
15
15
15
15
Test temperature: 175ºC+3/0ºC
Test voltage: 1.3 x category voltage at 175ºC
Series protection resistance 1000±100Ω
Discharge resistance: 1000Ω
Number of cycles: 1000x
Cycle duration: 6 min; 30 sec charge,
5 min 30 sec discharge
DCL
ΔC/C
DF
+20ºC -55ºC
IL*
n/a
n/a
+0/-10%
IL*
1.5 x IL*
+20ºC +125ºC +175ºC +20ºC
IL*
10 x IL* 12.5 x IL*
IL*
±5%
+10/-0% +18/-0% ±5%
IL*
1.5 x IL*
2 x IL*
IL*
ESR
1.25 x IL* 2.5 x IL*
1.25 x IL* 1.25 x IL* 1.25 x IL* 1.25 x IL*
Visual examination
no visible damage
DCL
initial limit
ΔC/C
within ±5% of initial value
DF
initial limit
ESR
1.25 x initial limit
*Initial Limit
www.avx.com | 11
High Temperature Tantalum Chip Capacitor
THJ Series with Extension to 200ºC
FEATURES
• SMD 200ºC tantalum capacitor
• 200°C @ 0.33VR 1000hrs continuous operation
• Leakage current after 200ºC 1000hrs less than 1mA
• 3x reflow 260°C
• Gold plated termination for hybrid assembly
• Oil drilling, aerospace, automotive applications
• CV range: 10-220μF / 10-16V
• 2 case sizes available
LEAD-FREE COMPATIBLE
COMPONENT
APPLICATIONS
• Downhole drilling
CHECK FOR UP-TO-DATE DATASHEET AT
http://www.avx.com/docs/catalogs/thj200c.pdf
MARKING
CASE DIMENSIONS: millimeters (inches)
B, E CASE
AVX LOGO
Polarity
Band
(Anode+)
Capacitance Value in pF
227 = 220μF
227 A
XXXXX
Rated Voltage Code
A = 10V
Code
EIA
Code
B
1210
E
2917
Case Size
See table
above
Capacitance Code
pF code: 1st two
digits represent
significant figures
3rd digit represents
multiplier (number of
zeros to follow)
H+0.20 (0.008)
–0.10 (0.004)
W1±0.20
(0.008)
A+0.30 (0.012)
–0.20 (0.008)
S Min.
3528-21 3.50 (0.138)
2.80 (0.110)
1.90 (0.075)
2.20 (0.087)
0.80 (0.031)
1.40 (0.055)
7343-43 7.30 (0.287)
4.30 (0.169)
4.10 (0.162)
2.40 (0.094)
1.30 (0.051)
4.40 (0.173)
L±0.20
(0.008)
W1 dimension applies to the termination width for A dimensional area only.
ID Code
HOW TO ORDER
THJ
E
107
Type
W+0.20 (0.008)
–0.10 (0.004)
EIA
Metric
*
016
A
JH
Tolerance
K=±10%
M=±20%
Rated DC Voltage
010=10Vdc
016=16Vdc
Packaging
A = Gold Plating 7" Reel
B = Gold Plating 13" Reel
Standard
Suffix
TECHNICAL SPECIFICATIONS
Technical Data:
Capacitance Range:
Capacitance Tolerance:
Leakage Current DCL @ VR 25ºC
Leakage Current DCL @ VC 200ºC, 1000 hrs
Rated Voltage (VR)
ⱕ +85°C:
Category Voltage (VC)
ⱕ +200°C:
Surge Voltage (Vs)
ⱕ +85°C:
Surge Voltage (Vs)
ⱕ +200°C:
Temperature Range:
Reliability:
Termination Finished:
12 | www.avx.com
All technical data relate to an ambient temperature of +25°C
10 μF to 220 μF
±10%; ±20%
0.01CV
1mA
10
16
3.3
5.3
13
20
4.3
6.5
-55ºC up 200ºC with voltage derating
0.5% per 1000 hours at 85ºC, VR with 0.1Ω/V series impedance,
1000 hrs at 200ºC, 0.33VR
Gold Plating
Meets requirements of AEC-Q200
High Temperature Tantalum Chip Capacitor
THJ Series with Extension to 200ºC
CAPACITANCE AND RATED VOLTAGE RANGE
(LETTER DENOTES CASE SIZE)
Capacitance
μF
Code
10
106
15
156
22
226
33
336
47
476
68
686
100
107
150
157
220
227
330
337
470
477
680
687
Rated voltage (VR ) to 85°C (Voltage Code)
10V (A)
16V (C)
B
E
E
Available Ratings
Engineering samples - please contact manufacturer
*Codes under development – subject to change
Note: Voltage ratings are minimum values. AVX reserves the right to supply higher ratings in the same case size, to the same reliability standards
RATINGS & PART NUMBER REFERENCE
AVX
Part No.
Case Capacitance
Size
(μF)
Rated
Voltage
(V)
DCL
DCL
Rated
Category Category
(μA)
(mA)
DF
ESR
Temperature Voltage Temperature
Max.
Max.
% Max. (Ω) MSL
(ºC)
(V)
(ºC)
@ VR 25ºC @ VC 200ºC Max. @ 100kHz
1000 hrs
THJE227*010#JH
E
220
10
85
THJB106*016#JH
THJE107*016#JH
B
E
10
100
16
16
85
85
10 Volt @ 85°C
200
22
16 Volt @ 85°C
5.3
200
1.6
5.3
200
16
3.3
100kHz RMS Current (mA)
25ºC
85ºC
175ºC
200ºC
1.0
10
0.25
1
812
731
162
81
1.0
1.0
6
8
2.8
0.25
1
1
174
812
157
731
35
162
17
81
Moisture Sensitivity Level (MSL) is defined according to J-STD-020.
All technical data relates to an ambient temperature of +25°C. Capacitance and DF are measured at 120Hz, 0.5V RMS with a maximum DC bias of 2.2 volts.
DCL is measured at rated voltage after 5 minutes.
NOTE: AVX reserves the right to supply a higher voltage rating or tighter tolerance part in the same case size, to the same reliability standards.
THJ 200°C Voltage vs Temperature Rating
120%
100%
100%
100%
100%
80%
80%
60%
Rated range
66%
50%
40%
33%
20%
0%
-55°C
0°C
40°C
60°C
85°C
105°C
125°C
175°C
200°C
www.avx.com | 13
High Temperature Tantalum Chip Capacitor
THJ Series with Extension to 200ºC
QUALIFICATION TABLE
TEST
Endurance
Storage Life
Biased
Humidity
Temperature
Stability
Surge
Voltage
THJ 200ºC series (Temperature range -55ºC to +200ºC)
Characteristics
Visual examination
no visible damage
Determine after application of rated voltage for 2000
+48/-0 hours at 85±2ºC and then leaving 1-2 hours at
DCL
1.25 x initial limit
room temperature. Also determine of 200ºC temperaΔC/C
within ±10% of initial value
ture, category voltage for 2000 +48/-0 hours and
DF
initial limit
then leaving 1-2 hours at room temperature. Power
supply impedance to be ≤0.1Ω/V.
ESR
1.25 x initial limit
Visual examination
no visible damage
DCL
1.25 x initial limit
200ºC, 0V, 2000h
ΔC/C
within ±10% of initial value
DF
initial limit
ESR
1.25 x initial limit
Visual examination
no visible damage
DCL
2 x initial limit
Determine after leaving for 1000 hours at 85±2ºC,
85% relative humidity and rated voltage and then
ΔC/C
within ±10% of initial value
recovery 1-2 hours at room temperature.
DF
1.2 x initial limit
ESR
1.25 x initial limit
Condition
Step
1
2
3
4
5
6
Temperature°C
+20±2
-55+0/-3
+20±2
+85+3/-0
+200+3/-0
+20±2
Duration(min)
15
15
15
15
15
15
Test temperature: 200ºC+3/0ºC
Test voltage: 1.3 x category voltage at 200ºC
Series protection resistance 1000±100Ω
Discharge resistance: 1000Ω
Number of cycles: 1000x
Cycle duration: 6 min; 30 sec charge,
5 min 30 sec discharge
*Initial Limit
14 | www.avx.com
DCL
ΔC/C
DF
+20ºC -55ºC
IL*
n/a
n/a
+0/-10%
IL*
1.5 x IL*
+20ºC +125ºC +200ºC +20ºC
IL*
10 x IL* 12.5 x IL*
IL*
±5%
+10/-0% +18/-0% ±5%
IL*
1.5 x IL*
2 x IL*
IL*
ESR
1.25 x IL* 2.5 x IL*
1.25 x IL* 1.25 x IL* 1.25 x IL* 1.25 x IL*
Visual examination
no visible damage
DCL
initial limit
ΔC/C
within ±5% of initial value
DF
initial limit
ESR
1.25 x initial limit
TWC-Y High Temperature Series
COTS-Plus 200ºC Wet Tantalum
The TWC-Y high temperature series represents a COTS-Plus version of
conventional wet electrolytic tantalum capacitors that are designed for use at
200°C. The components listed are now capable of 500 hours of operation at
extreme temperature with the applicable derated voltage.
This design includes a welded tantalum can and header assembly that provides a
hermetic seal to withstand harsh environments.
This is a new product line so please contact the factory for availability and
additional details.
CHECK FOR UP-TO-DATE DATASHEET AT
http://www.avx.com/docs/catalogs/twc200.pdf
CASE DIMENSIONS: millimeters (inches)
Standard
Case
Size
T1
T2
T3
T4
AVX
Case
Size
A
B
D
E
L
+0.79 (0.031)
-0.41 (0.016)
11.51 (0.453)
16.28 (0.641)
19.46 (0.766)
26.97 (1.062)
D
Basic Case
±0.41 (0.016)
4.78 (0.188)
7.14 (0.281)
9.52 (0.375)
9.52 (0.375)
D
Insulated Case
Max
5.56 (0.219)
7.92 (0.312)
10.31 (0.406)
10.31 (0.406)
E
±6.35 (0.250)
38.10 (1.500)
57.15 (2.250)
57.15 (2.250)
57.15 (2.250)
OUTLINE DIMENSIONS
E
L
W
E
F
D
Terminal welded
to case (T)
F 6.35 (0.250)
W 0.64 +0.05
(.025 +.002)
T 2.380 (.094)
200°C LIFE TEST:
These components are capable of 500 hours of operation at 200°C with
the applicable 60% derated voltage. Following the life test components
which are stabilized at 25°C ± 5°C shall exhibit:
-
Leakage less than 200% the original requirement or ± 10μA
(whichever is greater)
ESR not greater than 200% the original requirement
Capacitance increase less than 10% or decrease less than 20%
the initial measurement
+
Case
HOW TO ORDER
AVX PART NUMBER:
TWC
B
476
*
050
䊐
C
Y
Z
00
00
Type
Case
Size
Capacitance
Code
pF code:
1st two digits
represent
significant
figures 3rd digit
represents
multiplier
(number of
zeros to follow)
Capacitance
Tolerance
M = ±20%
K = ±10%
Voltage
Code
Insulation Sleeve
C = Without Sleeve
S = With Sleeve
ESR
C = Standard ESR
Qualification
Y = High Temp.
Reliability
Z = Non-ER
Termination
Finish
00 = Sn/Pb 60/40
07 = 100% Tin
Custom Test
Options
00 = Standard
LEAD-FREE COMPATIBLE
COMPONENT
For RoHS compliant products,
please select correct termination style.
TECHNICAL SPECIFICATIONS
Technical Data:
Capacitance Tolerance:
Rated Voltage (VR)
Category Voltage (VC)
High Temp, Voltage (VT)
Surge Voltage (VS)
Temperature Range:
ⱕ 85°C
125°C
200°C
ⱕ 85°C
Unless otherwise specified, all technical data relate
±10%; ±20%
6
8
10
15
25
30
4
5
7
10
15
20
3.6
4.8
6
9
12
18
6.9
9.2
11.5
17.3
28.8
34.5
-55°C to +200°C
to an ambient temperature of +25°C
50
30
30
57.5
60
40
36
69
75
50
45
86.3
100
65
60
115
125
85
75
144
www.avx.com | 15
TWC-Y High Temperature Series
COTS-Plus 200ºC Wet Tantalum
STANDARD RATINGS & PART NUMBER REFERENCE
AVX Part Number
Cap (μF)
+25ºC
at 120Hz
DC Rated
Voltage (V)
at +85ºC
TWCB147*006䊐CYZ0000
TWCD337*006䊐CYZ0000
TWCD567*006䊐CYZ0000
140
330
560
6
6
6
TWCB127*008䊐CYZ0000
TWCD297*008䊐CYZ0000
TWCD437*008䊐CYZ0000
120
290
430
8
8
8
TWCB107*010䊐CYZ0000
TWCD257*010䊐CYZ0000
TWCD397*010䊐CYZ0000
100
250
390
10
10
10
TWCB706*015䊐CYZ0000
TWCD177*015䊐CYZ0000
TWCD277*015䊐CYZ0000
70
170
270
15
15
15
TWCA686*025䊐CYZ0000
TWCB107*025䊐CYZ0000
TWCD127*025䊐CYZ0000
TWCD187*025䊐CYZ0000
TWCB277*025䊐CYZ0000
TWCD567*025䊐CYZ0000
68
100
120
180
270
560
25
25
25
25
25
25
TWCA566*030䊐CYZ0000
TWCB686*030䊐CYZ0000
TWCD107*030䊐CYZ0000
TWCD157*030䊐CYZ0000
TWCB227*030䊐CYZ0000
TWCE307*030䊐CYZ0000
TWCD397*030䊐CYZ0000
TWCD477*030䊐CYZ0000
TWCE567*030䊐CYZ0000
56
68
100
150
220
300
390
470
560
30
30
30
30
30
30
30
30
30
TWCA336*050䊐CYZ0000
TWCB476*050䊐CYZ0000
TWCD606*050䊐CYZ0000
TWCD826*050䊐CYZ0000
TWCB127*050䊐CYZ0000
TWCE167*050䊐CYZ0000
TWCD277*050䊐CYZ0000
TWCE337*050䊐CYZ0000
33
47
60
82
120
160
270
330
50
50
50
50
50
50
50
50
TWCA276*060䊐CYZ0000
TWCD506*060䊐CYZ0000
TWCD686*060䊐CYZ0000
TWCB107*060䊐CYZ0000
TWCE147*060䊐CYZ0000
TWCD227*060䊐CYZ0000
TWCE277*060䊐CYZ0000
27
50
68
100
140
220
270
60
60
60
60
60
60
60
TWCA226*075䊐CYZ0000
TWCD566*075䊐CYZ0000
TWCB826*075䊐CYZ0000
TWCE117*075䊐CYZ0000
TWCD187*075䊐CYZ0000
TWCE227*075䊐CYZ0000
22
56
82
110
180
220
75
75
75
75
75
75
TWCB226*100䊐CYZ0000
TWCE127*100䊐CYZ0000
22
120
100
100
TWCB276*125䊐CYZ0000
TWCE826*125䊐CYZ0000
27
82
125
125
DC Leakage (μA)
+85ºC
& +125ºC
+25ºC
DF
(max)
ESR Max
(Ohms)
at 120Hz
Maximum Capacitance
Change (%)
-55ºC
+85ºC
+125ºC
6 VDC at 85°C
4 VDC at 125°C
3.6 VDC at 200°C
1
3
21
1.99
-40
2
7.9
36
1.45
-44
2
13
55
1.30
-64
8 VDC at 85°C
5 VDC at 125°C
4.8 VDC at 200°C
1
2
20
2.21
-44
2
6
34
1.56
-64
2
14
46
1.42
-64
10 VDC at 85°C
7 VDC at 125°C
6 VDC at 200°C
1
4
15
1.99
-36
2
10
30
1.59
-40
2
16
44
1.50
-64
15 VDC at 85°C
10 VDC at 125°C
9 VDC at 200°C
1
4
13
2.46
-28
2
10
25
1.95
-32
2
16
32
1.57
-56
25 VDC at 85°C
15 VDC at 125°C
15 VDC at 200°C
2
9
22
4.29
-50
1
10
15
1.99
-28
2
6
21
2.32
-32
2
18
26
1.92
-48
3
16
55
2.70
-62
7
28
76
1.80
-77
30 VDC at 85°C
20 VDC at 125°C
18 VDC at 200°C
2
9
22
5.21
-48
1
8
13
2.54
-24
2
12
17
2.26
-28
2
18
23
2.03
-48
3
16
42
2.53
-60
8
32
31
1.37
-60
6
18
53
1.80
-65
8
32
64
1.81
-70
9
36
55
1.30
-65
50 VDC at 85°C
30 VDC at 125°C
30 VDC at 200°C
2
9
12.3
4.95
-39
1
9
11
3.11
-28
2
12
12
2.65
-16
2
16
15
2.43
-32
4
24
22.5
2.49
-42
8
32
17
1.41
-50
8
32
37
1.82
-51
9
36
38
1.53
-46
60V VDC at 85°C
40 VDC at 125°C
36 VDC at 200°C
3
12
10.2
5.01
-34
2
12
10
2.65
-16
2
16
13
2.54
-32
4
20
19
2.52
.36
8
32
16
1.52
-40
8
32
30
1.81
-45
9
36
27
1.33
-45
75V VDC at 85°C
50 VDC at 125°C
45 VDC at 200°C
3
12
8.5
5.13
-29
2
17
11
2.61
-28
4
24
15.2
2.46
-30
9
36
12
1.45
-35
9
36
24.4
2.23
-40
10
40
37
1.80
-40
100 VDC at 85°C
65 VDC at 125°C
60 VDC at 200°C
1
9
7.5
4.52
-16
12
48
25
2.76
-35
125 VDC at 85°C
85 VDC at 125°C
75 VDC at 200°C
5
24
7.2
3.54
-18
12
48
17.4
2.82
-30
Case Size
Standard
AVX
14
14
17.5
16
16
20
T2
T3
T3
B
D
D
17.5
17.5
17.5
20
20
20
T2
T3
T3
B
D
D
14
14
17.5
16
16
20
T2
T3
T3
B
D
D
14
14
17.6
16
16
20
T2
T3
T3
B
D
D
12
13
13
13
13
20
15
15
15
15
16
25
T1
T2
T3
T3
T2
T3
A
B
D
D
B
D
12
13
10.5
13
13
25
18
20
25
15
15
12
15
16
25
25
25
30
T1
T2
T3
T3
T2
T4
T3
T3
T4
A
B
D
D
B
E
D
D
E
10
13
10.5
13
12
25
20
25
12
15
12
15
15
25
25
30
T1
T2
T3
T3
T2
T4
T3
T4
A
B
D
D
B
E
D
E
10
10.5
10.5
12
20
16
20
12
12
12
15
20
20
25
T1
T3
T3
T2
T4
T3
T4
A
D
D
B
E
D
E
10
10.5
12
20
16
20
12
15
15
20
20
25
T1
T3
T2
T4
T3
T4
A
D
B
E
D
E
8
15
8
17
T2
T4
B
E
12
15
15
17
T2
T4
B
E
All technical data relates to an ambient temperature of +25ºC. Capacitance and DF are measured at 120Hz, 0.5RMS with DC bias of 2.2V. DCL is measured at rated voltage after 5 minutes.
Note: AVX reserves the right to supply higher voltage rating in the same case size to the same reliability standards.
16 | www.avx.com
TWA-Y Series 200ºC
Wet Electrolytic Tantalum Capacitor
PRELIMINARY VERSION SUBJECT TO CHANGE
COMING SOON
The TWA-Y series represents a high temperature version of conventional
wet electrolytic Tantalum capacitors that are designed for use at 200°C. A
high capacitance cathode system allows for high CV (capacitance/voltage)
in standard case sizes.
Selected TWA-Y series values are capable of up to 2000 hours of operation
at extreme temperatures with the applicable derated voltage.
Mechanical testing being conducted in accordance to MIL-STD-202:
• High Frequency Vibration - method 204, test condition “D.”
• Mechanical Shock Test - method 213, test condition “I.”
This design includes a welded tantalum can and header assembly that
provides a hermetic seal to withstand harsh shock and vibration
requirements.
Contact the factory for additional options for customized component design.
OUTLINE DIMENSIONS
E
L
W
E
F
D
-
Terminal welded
to case (T)
F 6.35 (0.250)
W 0.64 ±0.05
(.025) (.002)
T 2.380 (.094)
+
Case
CASE DIMENSIONS: millimeters (inches)
DSCC
Case
Size
AVX
Case
Size
T1
T2
T3
T4
A
B
D
E
L
+0.79 (0.031)
-0.41 (0.016)
11.51
16.28
19.46
26.97
(0.453)
(0.641)
(0.766)
(1.062)
D
Without Insulating
Sleeve
±0.41 (0.016)
4.78 (0.188)
7.14 (0.281)
9.52 (0.375)
9.52 (0.375)
D
With Insulatiing
Sleeve
Max
5.56 (0.219)
7.92 (0.312)
10.31 (0.406)
10.31 (0.406)
E
±6.35 (0.250)
38.10
57.15
57.15
57.15
(1.500)
(2.250)
(2.250)
(2.250)
VOLTAGE RATINGS (Operating Temperature -55ºC to 200ºC)
Voltage (DC)
Rated Voltage: (VR)
85ºC
Derated Voltage: (VC)
125ºC
High Temperature Voltage: (VT) 200ºC
25
15
12
30
20
18
50
30
30
60
40
36
75
50
45
100
65
60
125
85
75
www.avx.com | 17
TWA-Y Series 200ºC
Wet Electrolytic Tantalum Capacitor
PRELIMINARY VERSION SUBJECT TO CHANGE
COMING SOON
HOW TO ORDER
AVX PART NUMBER:
TWA
E
757
*
075
䊐
Type
Case
Size
Capacitance
Code
pF code:
1st two digits
represent
significant
figures 3rd digit
represents
multiplier
(number of
zeros to follow)
Capacitance
Tolerance
K = ±10%
M = ±20%
Voltage
Code
Insulation Sleeve
C = Without Sleeve
S = With Sleeve
Frequency of
Applied
Ripple Current
Ambient Still Air
Temperature (ºC)
% of
100%
85ºC
90%
Rated
80%
Peak
70%
Voltage 66-2/3%
Y
Z
Packaging
Inspecition Level
Reliability
B = Tray Pack Y = In accordance with Z = Non-ER
CECC testing,
designed for high
temp
0
^
00
Qualification
Level
0 = N/A
Termination Finish
0 = Sn/Pb 60/40
7 = Matte tin
Custom Test
Options
00 = Standard
LEAD-FREE COMPATIBLE
COMPONENT
For RoHS compliant products,
please select correct termination style.
RIPPLE CURRENT MULTIPLIERS
Frequency of
Applied
Ripple Current
Ambient Still Air
Temperature (ºC)
% of
100%
85ºC
90%
Rated
80%
Peak
70%
Voltage 66-2/3%
B
vs. Frequency, temperature and applied voltage1/ 2/
120Hz
800Hz
1kHz
≤55
85
105
125
≤55
85
105
125
≤55
85
105
125
0.60
0.60
0.60
0.60
0.60
0.39
0.46
0.52
0.58
0.60
–
–
0.35
0.44
0.46
–
–
–
–
0.27
0.71
0.71
0.71
0.71
0.71
0.43
0.55
0.62
0.69
0.71
–
–
0.42
0.52
0.55
–
_
–
–
0.32
0.72
0.72
0.72
0.72
0.72
0.45
0.55
0.62
0.70
0.72
–
–
0.42
0.52
0.55
–
–
–
–
0.32
10kHz
40kHz
100kHz
≤55
85
105
125
≤55
85
105
125
≤55
85
105
125
0.88
0.88
0.88
0.88
0.88
0.55
0.67
0.76
0.85
0.88
–
–
0.52
0.64
0.68
–
–
–
–
0.40
1.00
1.00
1.00
1.00
1.00
0.63
0.77
0.87
0.97
1.00
–
–
0.59
0.73
0.77
–
_
–
–
0.45
1.10
1.10
1.10
1.10
1.10
0.69
0.85
0.96
1.07
1.10
–
–
0.65
0.80
0.85
–
–
–
–
0.50
1/ At 125ºC the rated voltage of the capacitors decreases to 66 2/3 of the 85ºC rated voltage.
2/ The peak of the applied ac ripple voltage plus the applied dc voltage must not exceed the dc voltage rating of the capacitors.
18 | www.avx.com
TWA-Y Series 200ºC
Wet Electrolytic Tantalum Capacitor
PRELIMINARY VERSION SUBJECT TO CHANGE
COMING SOON
CAPACITANCE AND RATED VOLTAGE, VR (VOLTAGE CODE) RANGE
(LETTER DENOTES CASE SIZE)
Capacitance
μF
Code
15
156
22
226
33
336
47
476
68
686
100
107
120
127
150
157
220
227
330
337
400
407
470
477
560
567
680
687
750
757
1000
108
50V
Rated Voltage DC (VR ) to 85°C
60V
75V
100V
125V
A*
B*
B*
D
E*
E
E
E*
E*
E
Released codes
Engineering samples - please contact manufacturer
*Codes under development
www.avx.com | 19
TWA-Y Series 200ºC
Wet Electrolytic Tantalum Capacitor
PRELIMINARY VERSION SUBJECT TO CHANGE
COMING SOON
RATINGS & PART NUMBER REFERENCE
Cap (μF)
25ºC
at 120Hz
DC Rated
Votage (V)
at 85ºC
ESR Max
(ohms)
at 120Hz
TWAE337*050䊐BYZ0^00
330
50
0.8
TWAB106*060䊐BYZ0^00
100
60
2.5
TWAA226*075䊐BYZ0^00
TWAE757*075䊐BYZ0^00
22
750
75
75
2.5
0.7
TWAB686*100䊐BYZ0^00
TWAD157*100䊐BYZ0^00
TWAE337*100䊐BYZ0^00
TWAE407*100䊐BYZ0^00
68
150
330
400
100
100
100
100
2.5
1.6
0.8
0.8
TWAE157*125䊐BYZ0^00
TWAE227*125䊐BYZ0^00
150
220
125
125
1.6
1.4
AVX Part Number
DC Leakage max (μA)
+85 &
+25ºC
+125ºC
50 VDC at 85°C
2.5
25
60 VDC at 85°C
1.7
10
75 VDC at 85°C
1.0
5
12.0
120
100 VDC at 85°C
2.0
10
3.0
25
6.0
60
10.0
100
125 VDC at 85°C
5.0
50
10.0
50
Impedance Maximum Capacitance Change
AC Ripple
max (Ohms)
(%)
(mA rms)
-55ºC at 120Hz -55ºC
+85ºC
+125ºC 85ºC at 40kHZ
30 VDC at 125°C 30 VDC at 200°C
24
15
-50
8
15
1900
40 VDC at 125°C 36 VDC at 200°C
12
30
-40
8
15
1100
50 VDC at 125°C 45 VDC at 200°C
8
66
-25
5
9
1050
60
10
-40
20
30
3800
65 VDC at 125°C 60 VDC at 200°C
13
37
-30
4
12
1650
22
22
-35
6
12
2100
30
10
-45
7
20
3600
30
10
-50
10
35
4100
85 VDC at 125°C 75 VDC at 200°C
35
20
-35
6
16
2750
25
12
-40
8
15
3600
TANG ␦ Max
+25ºC (%)
All technical data relates to an ambient temperature of +25ºC. Capacitance and DF are measured at 120Hz, 0.5RMS with DC bias of 2.2V.
DCL is measured at rated voltage after 5 minutes.
NOTE: AVX reserves the rights to supply higher voltage rating in the same case size, to the same reliability standards.
20 | www.avx.com
Case Size
Lifetime at
200°C (hrs.)
AVX
DSCC
E
T4
1000
B
T2
1000
A
E
T1
T4
1000
500
B
D
E
E
T2
T3
T4
T4
1000
1000
1000
500
E
E
T4
T4
1000
1000
THH 230ºC Hermetic Series
SMD 230ºC High Temperature Tantalum Capacitor in Hermetic Package
FEATURES
•
•
•
•
•
•
High temperature applications
Operational temperature up to Ur to 230ºC for 1000hrs service life *
Ceramic case hermetic packaging
Stability under humidity and ambient atmosphere exposure
Large case sizes including CTC-21D provide high capacitance values
Manufacturing and screening utilizing AVX patented Q-Process to effectively remove components that may experience excessive parametric shifts or instability in operation life
*Endurance qualification 200°C/0.5UR/10.000hrs on selected codes
APPLICATIONS
• Oil drilling
• Extreme temperature applications
For additional information on Q-process please consult the AVX technical publication
“Reaching the Highest Reliability for Tantalum Capacitors”
(see the link: http://www.avx.com/docs/techinfo/Qprocess.pdf)
MARKING
9, I CASE
107V
XXXXX
Polarity
Band
(Anode+)
CASE DIMENSIONS: millimeters (inches)
Capacitance Value in pF
107 = 100μF
AVX LOGO
Rated Voltage Code
V = 35V
ID Code
Code
Type
L±0.20
(0.008)
W±0.20
(0.008)
H Max.
W1±0.20
(0.008)
A±0.20
(0.008)
S Min.
9 (CTC-21D)
J-lead
(L shape)
11.50 ± 0.50
(0.453 ± 0.020)
12.50 ± 0.50
(0.492 ± 0.020)
6.15
(0.242)
12.50 ± 0.50
(0.492 ± 0.020)
1.90 ± 0.50
(0.075 ± 0.020)
7.00
(0.276)
9 (CTC-21D)
J-lead
(flex)
12.10 ± 0.50
(0.476 ± 0.020)
12.50 ± 0.50
(0.492 ± 0.020)
6.50
(0.256)
12.00 ± 0.50
(0.472 ± 0.020)
2.00 ± 0.50
(0.079 ± 0.020)
7.20
(0.283)
9 (CTC-21D)
Undertab
11.00
(0.433)
12.50
(0.492)
5.95
(0.234)
10.50
(0.413)
1.50
(0.059)
7.80
(0.307)
I
J-lead
(L shape)
11.50 ± 0.50
(0.453 ± 0.020)
6.00 ± 0.50
(0.236 ± 0.020)
2.70
(0.106)
6.00 ± 0.50
(0.236 ± 0.020)
3.50 ± 0.50
(0.138 ± 0.020)
4.00
(0.157)
I
J-lead
(flex)
11.90 ± 0.50
(0.469 ± 0.020)
6.00 ± 0.50
(0.236 ± 0.020)
3.00
(0.118)
5.50 ± 0.50
(0.217 ± 0.020)
3.60 ± 0.50
(0.142 ± 0.020)
4.20
(0.165)
I
Undertab
11.00
(0.433)
6.00
(0.236)
2.50
(0.098)
4.00
(0.157)
3.20
(0.126)
4.40
(0.173)
‘J’ Lead Termination (J-Flex)
L
‘J’ Lead Termination (L-Shape)
W
L
H
A
S
H
W1
A
A
S
W
L
W1
A
W
L
H
A
S
A
Undertab Termination
W
H
W1
A
S
A
W1
www.avx.com | 21
THH 230ºC Hermetic Series
SMD 230ºC High Temperature Tantalum Capacitor in Hermetic Package
TECHNICAL SPECIFICATIONS
Technical Data:
Capacitance Range:
Capacitance Tolerance:
Leakage Current DCL:
Rated Voltage (VR)
Category Voltage (VC)
Category Voltage (VC)
Category Voltage (VC)
Temperature Range:
Reliability:
Termination Finish:
ⱕ
ⱕ
ⱕ
ⱕ
+175°C
+200°C
+215°C
+230°C
All technical data relate to an ambient temperature of +25°C
3.3 μF to 330 μF
±20%
0.01CV
16
20
25
35
50
63
13
16
20
28
40
50
10
13
16
23
33
41
8
10
12
17
25
31
-55°C to +230°C for case size “9”, -55ºC to +215ºC for case size “I”
1% per 1000 hours at 85ºC, Vr with 0.1Ω/V series impedance, 60% confidence level
Gold Plating (Undertab), Gold Plating (J-lead L shape), Nickel Plating (J-lead flex)
HOW TO ORDER
AVX PART NUMBER
THH
9
107
M
035
W
0250
J
Type
Case
Size
See
table
above
Capacitance
Code
pF code:
1st two digits
represent
significant
figures 3rd digit
represents
multiplier
(number of
zeros to follow)
Tolerance
M = ±20%
Rated DC
Voltage
016 = 16Vdc
020 = 20Vdc
025 = 25Vdc
035 = 35Vdc
050 = 50Vdc
063 = 63Vdc
Packaging
W = Waffle
B = Bulk
ESR in mΩ
Termination
J = ‘J’ lead L shape
U = Undertab
W = ‘J’ lead flex
LEAD-FREE COMPATIBLE
COMPONENT
For RoHS compliant products,
please select correct termination style.
CAPACITANCE AND VOLTAGE RANGE (CODE DENOTES THE CASE SIZE)
Capacitance
μF
Code
3.3
335
4.7
475
6.8
685
10
106
15
156
22
226
33
336
47
476
68
686
100
107
150
157
220
227
330
337
Rated Voltage DC (VR) at 85ºC
16V (C)
I
I*
I
9*
9*
20V (D)
I*
I*
I*
I*
9*
9*
Available ratings
Engineering samples - please contact manufacturer
*Codes under development – upon request, please contact manufacturer
22 | www.avx.com
25V (E)
I*
I*
I*
35V (V)
I
I
I*
I*
50V (T)
I*
I*
I*
9*
9*
9*
9*
9
9*
63V (J)
I*
I*
9*
9
THH 230ºC Hermetic Series
SMD 230ºC High Temperature Tantalum Capacitor in Hermetic Package
RATINGS & PART NUMBER REFERENCE
AVX
Part No.
Case Capacitance
Size
(μF)
Rated
Voltage
(V)
Rated
Category Category
DCL
Temperature Voltage Temperature (μA)
(ºC)
(V)
(ºC)
Max.
THHI226M016W0500#
THHI336M016W0500#
THHI476M016W0500#
THH9227M016W0250#
THH9337M016W0250#
I
I
I
9
9
22
33
47
220
330
16
16
16
16
16
175
175
175
175
175
10
10
10
8
8
THHI156M020W0500#
THHI226M020W0500#
THHI336M020W0500#
THHI476M020W0500#
THH9157M020W0250#
THH9227M020W0250#
I
I
I
I
9
9
15
22
33
47
150
220
20
20
20
20
20
20
175
175
175
175
175
175
13
13
13
13
10
10
THHI156M025W0500#
THHI226M025W0500#
THHI336M025W0500#
THH9107M025W0250#
THH9157M025W0250#
I
I
I
9
9
15
22
33
100
150
25
25
25
25
25
175
175
175
175
175
16
16
16
12
12
THHI685M035W0500#
THHI106M035W0500#
THHI156M035W0500#
THHI226M035W0500#
THH9107M035W0250#
THH9157M035W0250#
I
I
I
I
9
9
6.8
10
15
22
100
150
35
35
35
35
35
35
175
175
175
175
175
175
23
23
23
23
17
17
THHI335M050W0500#
THHI475M050W0500#
THHI685M050W0500#
THH9476M050W0250#
THH9686M050W0250#
I
I
I
9
9
3.3
4.7
6.8
47
68
50
50
50
50
50
175
175
175
175
175
33
33
33
25
25
THHI335M063W0500#
THHI475M063W0500#
THH9336M063W0250#
THH9476M063W0250#
I
I
9
9
3.3
4.7
33
47
63
63
63
63
175
175
175
175
41
41
31
31
16 Volt @ 175°C
215
215
215
230
230
20 Volt @ 175°C
215
215
215
215
230
230
25 Volt @ 175°C
215
215
215
230
230
35 Volt @ 175°C
215
215
215
215
230
230
50 Volt @ 175°C
215
215
215
230
230
63 Volt @ 175°C
215
215
230
230
DF
%
Max.
ESR
Max. (mΩ)
@ 100kHz
MSL
100kHz RMS Current (A)
3.6
5.3
7.5
35.2
52.8
8
8
8
8
8
500
500
500
250
250
3
4.4
6.6
9.4
30
44
8
8
8
8
8
8
3.8
5.5
8.3
25
37.5
25ºC
85ºC
230ºC
Product
Category
1
1
1
1
1
0.81
0.81
0.81
1.26
1.26
0.73
0.73
0.73
1.13
1.13
0.73
0.73
0.73
1.13
1.13
215
215
215
230
230
500
500
500
500
250
250
1
1
1
1
1
1
0.81
0.81
0.81
0.81
1.26
1.26
0.73
0.73
0.73
0.73
1.13
1.13
0.73
0.73
0.73
0.73
1.13
1.13
215
215
215
215
230
230
8
8
8
8
8
500
500
500
250
250
1
1
1
1
1
0.81
0.81
0.81
1.26
1.26
0.73
0.73
0.73
1.13
1.13
0.73
0.73
0.73
1.13
1.13
215
215
215
230
230
2.4
3.5
5.3
7.7
35
52.5
8
8
8
8
8
8
500
500
500
500
250
250
1
1
1
1
1
1
0.81
0.81
0.81
0.81
1.26
1.26
0.73
0.73
0.73
0.73
1.13
1.13
0.73
0.73
0.73
0.73
1.13
1.13
215
215
215
215
230
230
1.7
2.4
3.4
23.5
34
8
8
8
8
8
500
500
500
250
250
1
1
1
1
1
0.81
0.81
0.81
1.26
1.26
0.73
0.73
0.73
1.13
1.13
0.73
0.73
0.73
1.13
1.13
215
215
215
230
230
2.1
3
20.8
29.6
8
8
8
8
500
500
250
250
1
1
1
1
0.81
0.81
1.26
1.26
0.73
0.73
1.13
1.13
0.73
0.73
1.13
1.13
215
215
230
230
All technical data relates to an ambient temperature of +25°C. Capacitance and DF are measured at 120Hz, 0.5V RMS with a maximum DC bias of 2.2 volts.
DCL is measured at rated voltage after 5 minutes.
ESR change post 1000hrs allowed up to 3 times catalog limit.
Parts are aged at 230ºC.
Moisture Sensitivity Level (MSL) is defined according to J-STD-020.
TEMPERATURE VOLTAGE DERATING
THH 230°C Voltage vs Temperature Rating for 1000 hrs service life
120%
100%
100%
100%
100%
80%
80%
Rated Range
60%
66%
50%
40%
RATED VOLTAGE
RANGE
20%
0%
-55°C
0°C
40°C
60°C
85°C
105°C
CATEGORY VOLTAGE
RANGE
125°C
175°C
200°C
215°C
230°C
www.avx.com | 23
THH 230ºC Hermetic Series
SMD 230ºC High Temperature Tantalum Capacitor in Hermetic Package
QUALIFICATION TABLE
THH 230°C hermetic series (Temperature range -55ºC to +230ºC)
Condition
Characteristics
TEST
Endurance
Endurance**
Determine after application of rated voltage for 1000
+48/0 hours at 175±2ºC and then leaving min.
2 hours at room temperature. Also determine of 200ºC
temperature, category voltage for 2000+48/-0 hours
and then leaving min. 2 hours at room temperature.
Also determine after application of 230°C temperature, category voltage for 1000+48/-0 hours and then
leaving min. 2 hours at room temperature. Power supply impedance to be <3Ω.
Determine after application of rated voltage for 200°C
temperature, 0.5UR for 10000+48/-0 hours and then
leaving min. 2 hours at room temperature. Power
supply impedance to be <3Ω.
Storage Life
Biased
Humidity
Temperature
Stability
Surge
Voltage
230ºC, 0V, 1000h + 48/-0 hours
Determine after leaving for 1000 hours at 85±2ºC,
85% relative humidity and rated voltage and then
recovery min. 2 hours at room temperature.
Step
1
2
3
4
5
6
7
8
9
Temperature°C
+22
-55
+22
+85
+125
+175
+200
+230
+22
Duration (min)
15
15
15
15
15
15
15
15
15
Test temperature: 85ºC+3/0ºC
Surge voltage: 1.3 x rated voltage
Series protection resistance: 33Ω
Discharge resistance: 33Ω
Number of cycles: 1000x
Cycle duration: 5 min; 30 sec charge,
5 min 30 sec discharge
*Initial Limit
**Endurance qualification 200°C / 0.5UR / 10.000hrs on selected codes
24 | www.avx.com
Visual examination
no visible damage
DCL
1.25 x initial limit
ΔC/C
within ±20% of initial value
DF
1.5 x initial limit
ESR
Visual examination
DCL
ΔC/C
DF
ESR
Visual examination
DCL
ΔC/C
DF
ESR
Visual examination
DCL
ΔC/C
DF
ESR
3 x initial limit
no visible damage
1.25 x initial limit
within ±20% of initial value
1.5 x initial limit
3 x initial limit
no visible damage
initial limit
within ±5% of initial value
initial limit
1.25 x initial limit
no visible damage
initial limit
within ±10% of initial value
initial limit
1.25 x initial limit
+20ºC
-55ºC
+22ºC
DCL
IL*
n/a
IL*
ΔC/C
n/a
+0/-20%
±5%
DF
IL*
1.5 x IL*
IL*
ESR
+85ºC +125ºC +175ºC +200ºC +230ºC +22ºC
10 x IL* 12.5 x IL*
n/a
n/a
n/a
+20/-0% +30/-0% +30/-0% +30/-0% +30/-0%
1.5 x IL*
2 x IL*
2 x IL*
2 x IL*
2 x IL*
IL*
±5%
IL*
1.25 x IL* 1.25 x IL* 1.25 x IL* 1.25 x IL* 1.25 x IL* 1.25 x IL* 1.25 x IL* 1.25 x IL* 1.25 x IL*
Visual examination
no visible damage
DCL
initial limit
ΔC/C
within ±20% of initial value
DF
initial limit
ESR
1.25 x initial limit
CERAMIC
CAPACITORS
Ceramic capacitors are the basic
building block for every electronic
design. AVX has a long history in
manufacturing ceramic capacitors
which enables us to offer a wide
range of high temperature capacitors
for down hole and mission critical
applications.
• AT Series
Surface mount MLCCs with
extended temperature range up to
+200ºC and +250ºC, in C0G and
VHT dielectrics.
• X8R/X8L Dielectric
MLCC performance elevated to
accommodate high temperature
applications up to +150ºC.
• FLEXITERM® and FLEXISAFE®
Offer improved resistance against
failures caused by board flexing
and temperature shock.
• MLCC with Tin/Lead (Sn/Pb)
Terminations
Ceramic capacitors with Sn/Pb
terminations and X8R dielectric for
mission critical applications.
• Radial Leaded SkyCap®
AR Series
Ceramic technology in leaded,
epoxy encapsulated packaging for
harsh environment applications.
A KYOCERA GROUP COMPANY
AT Series
High Temperature MLCC – 200ºC & 250ºC Rated
Present military specifications, as well as a majority of commercial applications, require a maximum operating temperature of 125°C. However,
the emerging market for high temperature electronics demands capacitors operating reliably at temperatures beyond 125°C. AVX’s new high
temperature chip capacitor product line, with verified capability of longterm operation up to 250°C is a response to both military and commercial business needs. The new capacitors demonstrate high current handling capabilities, high volumetric efficiency, high insulation resistance
and low ESR/ESL. This product has been designed for the most
demanding applications, such as “down-hole” oil exploration and aerospace programs.
HOW TO ORDER
AT10
3
T
104
K
A
T
2
A
AVX
Style
AT05 = 0805
AT06 = 1206
AT10 = 1210
AT12 = 1812
AT14 = 2225
Voltage Temperature Capacitance Code Capacitance Test Level
Termination*
Packaging
Special
Code
Coefficient
(2 significant digits
Tolerance
A = Standard 1 = Pd/Ag
Code
2 = 7" Reel
16V = Y C0G 250ºC = A
+ no. of zeros)
J = ±5%
T = 100% Sn Plated 4 = 13" Reel A = Standard
(RoHS Compliant) 9 = Bulk
25V = 3 C0G 200ºC = 2
101 = 100pF
K = ±10%
50V = 5 VHT 250ºC = T
102 = 1nF
M = ±20%
VHT 200ºC = 4
103 = 10nF
(Class II)
104 = 100nF
105 = 1μF
*Voltage rated at 200ºC or 250ºC
ELECTRICAL SPECIFICATIONS
Temperature Coefficient
C0G: A 0±30 ppm/°C, -55°C to +250°C
VHT: T ±15%, -55°C to +150°C
See TCC Plot for +250°C
Insulation Resistance 125°C (MIL-STD-202, Method 302)
10GΩ or 100MΩ.μF (whichever is less)
Insulation Resistance 200°C (MIL-STD-202, Method 302)
1GΩ or 10MΩ.μF (whichever is less)
Capacitance Test (MIL-STD-202, Method 305)
25°C, 1.0 ± 0.2 Vrms (open circuit voltage) @ 1kHz
Dissipation factor 25°C
C0G: 0.15% Max at 1.0 ± 0.2 Vrms (open circuit voltage) @ 1kHz
VHT: 2.5% Max at 1.0 ± 0.2 Vrms (open circuit voltage) @ 1kHz
Insulation Resistance 250°C (MIL-STD-202, Method 302)
100MΩ or 1MΩ.μF (whichever is less)
Direct Withstanding Voltage 25°C (Flash Test)
250% rated voltage for 5 seconds with 50mA max charging current
(500 Volt units @ 750VDC)
Insulation Resistance 25°C (MIL-STD-202, Method 302)
100GΩ or 1000MΩ.μF (whichever is less)
DIMENSIONS
millimeters (inches)
W
L
T
t
26 | www.avx.com
Size
(L) Length
AT05 = 0806 AT06 = 1206
AT10 = 1210 AT12 = 1812
AT14 = 2225
2.01 ± 0.20
3.20 ± 0.20
3.20 ± 0.20
4.50 ± 0.30
5.72 ± 0.25
(0.079 ± 0.008) (0.126 ± 0.008) (0.126 ± 0.008) (0.177 ± 0.012) (0.225 ± 0.010)
(W) Width
1.25 ± 0.20
1.60 ± 0.20
2.50 ± 0.20
3.20 ± 0.20
6.35 ± 0.25
(0.049 ± 0.008) (0.063 ± 0.008) (0.098 ± 0.008) (0.126 ± 0.008) (0.250 ± 0.010)
(T) Thickness
1.30
1.52
1.70
2.54
2.54
Max.
(0.051)
(0.060)
(0.067)
(0.100)
(0.100)
(t) terminal min. 0.25 (0.010)
0.25 (0.010)
0.25 (0.010)
0.25 (0.010)
0.25 (0.010)
max. 0.75 (0.030)
0.75 (0.030)
0.75 (0.030)
1.02 (0.040)
1.02 (0.040)
AT Series
High Temperature MLCC – 200ºC & 250ºC Rated
PERFORMANCE CHARACTERISTICS
Typical Temperature Coefficient of Capacitance (C0G Dielectric)
Typical Temperature Coefficient of Capacitance (VHT Dielectric)
1
15
0.75
0.5
0.25
C (%)
C (%)
-13.75
-42.5
+30 ppm/°C TCC Limit
0
-0.25
-0.5
-71.25
-0.75
-30 ppm/°C TCC Limit
-1
-100
-50
-25
0
25
50
75
100
125
150
175
200
225
-50
250
-25
0
25
50
75
100
125
150
175
200
225
250
Temperature (°C)
Temperature (°C)
Typical Voltage Coefficient of Capacitance (C0G Dielectric)
Typical Voltage Coefficient of Capacitance (VHT Dielectric)
1
5
0.8
Legend:
Capacitor’s Rated
Voltage
-5
0.6
0.4
C (%)
C (%)
0
16VDC
25VDC
50VDC
100VDC
200VDC
-10
0.2
0
-0.2
-0.4
-15
-0.6
-0.8
-20
0
10
20
30
40
50
60
70
80
90
-1
100
0
10
20
30
Percentage of Rated Voltage
40
50
60
70
80
90
100
Percentage of Rated Voltage
RC vs Temperature (VHT Dielectric)
RC vs Temperature (C0G Dielectric)
10000
1000000
Typical [email protected]
Typical [email protected]
Typical RC @25VDC
Typical [email protected]
100000
*F)
100
RC (
RC (
*F)
1000
10000
1000
100
10
10
1
25
50
75
100
125
150
Temperature (°C)
175
200
225
250
1
25
50
75
100
125
150
175
200
225
250
Temperature (°C)
www.avx.com | 27
AT Series
High Temperature MLCC – 200ºC & 250ºC Rated
RELIABILITY
250°C Life Test @ 2x Rated Voltage (VHT Dielectric)
250°C Life Test @ 2x Rated Voltage (C0G Dielectric)
48000
AT05YT104
AT103T104
AT123T334
AT143T105
0.825
0.55
0.275
Capacitance (pF)
Capacitance ( F)
1.1
36000
AT143A473
AT123A123
24000
12000
0
0
0
250
500
750
0
1000
250
500
750
1000
Time (hrs)
Time (hrs)
VAT - Failure Rate @ 90% Confidence Level (%/1000 hours)
Temperature (°C)
50% Rated Voltage
100% Rated Voltage
200
0.002
0.017
250
0.026
0.210
*Typical 1210, 1812, 2225 Failure Rate Analysis based on 250°C testing and
voltage ratings specified on the following page.
C0G - Failure Rate @ 90% Confidence Level (%/1000 hours)
Temperature (°C)
50% Rated Voltage
100% Rated Voltage
200
0.006
0.047
250
0.074
0.590
*Typical 1812 and 2225 Failure Rate Analysis based on 250°C testing and
voltage ratings specified on the following page.
FREQUENCY RESPONSE
Impedance Frequency Response (VHT Dielectric)
ESR Frequency Response (VHT Dielectric)
1E+05
1E+03
AT05YT104
AT123T334
AT143T105
AT05YT104
AT123T334
AT143T105
1E+02
)
1E+03
1E+02
ESR (
Impedance (
)
1E+04
1E+01
1E+01
1E+00
1E+00
1E-01
1E-01
1E-02
1E+01
1E+02
1E+03
1E+04
1E+05
1E+06
1E+07
1E-02
1E+01
1E+08
1E+02
1E+03
Frequency (Hz)
Impedance Frequency Response (C0G Dielectric)
1E+07
1E+08
AT43A473
AT123A123
AT43A473
AT123A123
)
1E+02
ESR (
)
Impedance (
1E+06
1E+03
1E+05
1E+03
1E+05
ESR Frequency Response (C0G Dielectric)
1E+06
1E+04
1E+04
Frequency (Hz)
1E+02
1E+01
1E+01
1E+00
1E-01
1E+00
1E-02
1E-01
1E-02
1E+01
1E+02
1E+03
1E+04
1E+05
Frequency (Hz)
28 | www.avx.com
1E+06
1E+07
1E+08
1E-03
1E+01
1E+02
1E+03
1E+04
1E+05
Frequency (Hz)
1E+06
1E+07
1E+08
AT Series
High Temperature MLCC – 200ºC & 250ºC Rated
CAPACITANCE RANGE
PREFERRED SIZES ARE SHADED
VHT
Temp. Coefficient: 4
Case Size
Soldering
(L) Length
mm
(in.)
(W) Width
mm
(in.)
(T) Thickness mm
(in.)
(t) Terminal
min
max
Rated Temp. (ºC)
Temp. Coefficeint
Voltage (V)
Cap 1000 102
(pF) 1200 122
1500 152
1800 182
2200 222
2700 272
3300 332
3900 392
4700 472
5600 562
6800 682
8200 822
Cap 0.010 103
(μF) 0.012 123
0.015 153
0.018 183
0.022 223
0.027 273
0.033 333
0.039 393
0.047 473
0.056 563
0.068 683
0.082 823
0.100 104
0.120 124
0.150 154
0.180 184
0.220 224
0.270 274
0.330 334
0.390 394
0.470 474
0.560 564
0.680 684
0.820 824
1.000 105
Voltage (V)
Rated Temp. (ºC)
Case Size
VHT
200ºC Rated
AT05 = 0805 AT06 = 1206 AT10 = 1210 AT12 = 1812
AT14 = 2225
Case Size
Soldering
Reflow/Wave
Reflow/Wave
Reflow Only
Reflow Only
Reflow Only
2.01 ± 0.20
(0.079 ± 0.008)
1.25 ± 0.20
(0.049 ± 0.008)
1.30
(0.051)
0.25 (0.010)
0.75 (0.030)
200
4
50
3.20 ± 0.20
(0.126 ± 0.008)
1.60 ± 0.20
(0.063 ± 0.008)
1.52
(0.060)
0.25 (0.010)
0.75 (0.030)
200
4
50
3.20 ± 0.20
(0.126 ± 0.008)
2.50 ± 0.20
(0.098 ± 0.008)
1.70
(0.067)
0.25 (0.010)
0.75 (0.030)
200
4
50
4.50 ± 0.30
(0.177 ± 0.012)
3.20 ± 0.20
(0.126 ± 0.008)
2.54
(0.100)
0.25 (0.010)
1.02 (0.040)
200
4
50
2.75 ± 0.25
(0.225 ± 0.010)
6.35 ± 0.25
(0.250 ± 0.010)
2.54
(0.100)
0.25 (0.010)
1.02 (0.040)
200
4
50
50
200
50
200
50
200
50
200
50
200
AT05 = 0805 AT06 = 1206
Temp. Coefficient: T
AT10 = 1210 AT12 = 1812 AT14 = 2225
(L) Length
mm
(in.)
(W) Width
mm
(in.)
(T) Thickness mm
(in.)
(t) Terminal
min
max
Rated Temp. (ºC)
Temp. Coefficeint
Voltage (V)
Cap 1000 102
(pF) 1200 122
1500 152
1800 182
2200 222
2700 272
3300 332
3900 392
4700 472
5600 562
6800 682
8200 822
Cap 0.010 103
(μF) 0.012 123
0.015 153
0.018 183
0.022 223
0.027 273
0.033 333
0.039 393
0.047 473
0.056 563
0.068 683
0.082 823
0.100 104
0.120 124
0.150 154
0.180 184
0.220 224
0.270 274
0.330 334
0.390 394
0.470 474
0.560 564
0.680 684
0.820 824
1.000 105
Voltage (V)
Rated Temp. (ºC)
Case Size
250ºC Rated
AT05 = 0805 AT06 = 1206 AT10 = 1210 AT12 = 1812
AT14 = 2225
Reflow/Wave
Reflow/Wave
Reflow Only
Reflow Only
Reflow Only
2.01 ± 0.20
(0.079 ± 0.008)
1.25 ± 0.20
(0.049 ± 0.008)
1.30
(0.051)
0.25 (0.010)
0.75 (0.030)
250
T
25
3.20 ± 0.20
(0.126 ± 0.008)
1.60 ± 0.20
(0.063 ± 0.008)
1.52
(0.060)
0.25 (0.010)
0.75 (0.030)
250
T
25
3.20 ± 0.20
(0.126 ± 0.008)
2.50 ± 0.20
(0.098 ± 0.008)
1.70
(0.067)
0.25 (0.010)
0.75 (0.030)
250
T
25
4.50 ± 0.30
(0.177 ± 0.012)
3.20 ± 0.20
(0.126 ± 0.008)
2.54
(0.100)
0.25 (0.010)
1.02 (0.040)
250
T
25
2.75 ± 0.25
(0.225 ± 0.010)
6.35 ± 0.25
(0.250 ± 0.010)
2.54
(0.100)
0.25 (0.010)
1.02 (0.040)
250
T
25
25
250
25
250
25
250
25
250
25
250
AT05 = 0805 AT06 = 1206
AT10 = 1210 AT12 = 1812 AT14 = 2225
Voltage rating per table. Capacitance values specified at 25ºC, derate capacitance value based on TCC and VCC Plots on page 27.
NOTE: Contact factory for non-specified capacitance values.
www.avx.com | 29
AT Series
High Temperature MLCC – 200ºC & 250ºC Rated
CAPACITANCE RANGE
PREFERRED SIZES ARE SHADED
C0G
Temp. Coefficient: 2
Case Size
Soldering
(L) Length
mm
(in.)
(W) Width
mm
(in.)
(T) Thickness mm
(in.)
(t) Terminal
min
max
Rated Temp. (ºC)
Temp. Coefficeint
Voltage (V)
Cap
100 101
(pF)
120 121
150 151
180 181
220 221
270 271
330 331
390 391
470 471
560 561
680 681
820 821
1000 102
1200 122
1500 152
1800 182
2200 222
2700 272
3300 332
3900 392
4700 472
5600 562
6800 682
8200 822
Cap 0.010 103
(μF) 0.012 123
0.015 153
0.018 183
0.022 223
0.027 273
0.033 333
0.039 393
0.047 473
0.056 563
0.068 683
0.082 823
0.100 104
Voltage (V)
Rated Temp. (ºC)
Case Size
C0G
200ºC Rated
AT05 = 0805 AT06 = 1206 AT10 = 1210 AT12 = 1812
AT14 = 2225
Case Size
Soldering
Reflow/Wave
Reflow/Wave
Reflow Only
Reflow Only
Reflow Only
2.01 ± 0.20
(0.079 ± 0.008)
1.25 ± 0.20
(0.049 ± 0.008)
1.30
(0.051)
0.25 (0.010)
0.75 (0.030)
200
2
50
3.20 ± 0.20
(0.126 ± 0.008)
1.60 ± 0.20
(0.063 ± 0.008)
1.52
(0.060)
0.25 (0.010)
0.75 (0.030)
200
2
50
3.20 ± 0.20
(0.126 ± 0.008)
2.50 ± 0.20
(0.098 ± 0.008)
1.70
(0.067)
0.25 (0.010)
0.75 (0.030)
200
2
50
4.50 ± 0.30
(0.177 ± 0.012)
3.20 ± 0.20
(0.126 ± 0.008)
2.54
(0.100)
0.25 (0.010)
1.02 (0.040)
200
2
50
2.75 ± 0.25
(0.225 ± 0.010)
6.35 ± 0.25
(0.250 ± 0.010)
2.54
(0.100)
0.25 (0.010)
1.02 (0.040)
200
2
50
50
200
50
200
50
200
50
200
50
200
AT05 = 0805 AT06 = 1206
Temp. Coefficient: A
AT10 = 1210 AT12 = 1812 AT14 = 2225
(L) Length
mm
(in.)
(W) Width
mm
(in.)
(T) Thickness mm
(in.)
(t) Terminal
min
max
Rated Temp. (ºC)
Temp. Coefficeint
Voltage (V)
Cap
100 101
(pF)
120 121
150 151
180 181
220 221
270 271
330 331
390 391
470 471
560 561
680 681
820 821
1000 102
1200 122
1500 152
1800 182
2200 222
2700 272
3300 332
3900 392
4700 472
5600 562
6800 682
8200 822
Cap 0.010 103
(μF) 0.012 123
0.015 153
0.018 183
0.022 223
0.027 273
0.033 333
0.039 393
0.047 473
0.056 563
0.068 683
0.082 823
0.100 104
Voltage (V)
Rated Temp. (ºC)
Case Size
250ºC Rated
AT05 = 0805 AT06 = 1206 AT10 = 1210 AT12 = 1812
Reflow/Wave
Reflow Only
Reflow Only
Reflow Only
2.01 ± 0.20
(0.079 ± 0.008)
1.25 ± 0.20
(0.049 ± 0.008)
1.30
(0.051)
0.25 (0.010)
0.75 (0.030)
250
A
25
3.20 ± 0.20
(0.126 ± 0.008)
1.60 ± 0.20
(0.063 ± 0.008)
1.52
(0.060)
0.25 (0.010)
0.75 (0.030)
250
A
25
3.20 ± 0.20
(0.126 ± 0.008)
2.50 ± 0.20
(0.098 ± 0.008)
1.70
(0.067)
0.25 (0.010)
0.75 (0.030)
250
A
25
4.50 ± 0.30
(0.177 ± 0.012)
3.20 ± 0.20
(0.126 ± 0.008)
2.54
(0.100)
0.25 (0.010)
1.02 (0.040)
250
A
25
2.75 ± 0.25
(0.225 ± 0.010)
6.35 ± 0.25
(0.250 ± 0.010)
2.54
(0.100)
0.25 (0.010)
1.02 (0.040)
250
A
25
25
250
25
250
25
250
25
250
25
250
AT05 = 0805 AT06 = 1206
AT10 = 1210 AT12 = 1812 AT14 = 2225
Voltage rating per table. Capacitance values specified at 25ºC, derate capacitance value based on TCC and VCC Plots on page 27.
NOTE: Contact factory for non-specified capacitance values.
30 | www.avx.com
AT14 = 2225
Reflow/Wave
X8R/X8L Dielectric
General Specifications
AVX has developed a range of multilayer ceramic capacitors designed for use in applications up to 150ºC.
These capacitors are manufactured with an X8R and an X8L dielectric material. X8R material has
capacitance variation of ±15% between -55ºC and +150ºC. The X8L material has capacitance variation of
±15% between -55ºC to 125ºC and +15/-40% from +125ºC to +150ºC.
The need for X8R and X8L performance has been driven by customer requirements for parts that operate
at elevated temperatures. They provide a highly reliable capacitor with low loss and stable capacitance
over temperature.
They are ideal for automotive under the hood sensors, and various industrial applications. Typical industrial
application would be drilling monitoring system. They can also be used as bulk capacitors for high
temperature camera modules.
Both X8R and X8L dielectric capacitors are automotive AEC-Q200 qualified. Optional termination systems, tin,
FLEXITERM® and conductive epoxy for hybrid applications are available. Providing this series with our
FLEXITERM® termination system provides further advantage to customers by way of enhanced resistance to
both, temperature cycling and mechanical damage.
CHECK FOR UP-TO-DATE DATASHEET AT
http://www.avx.com/docs/catalogs/cauto.pdf
HOW TO ORDER
0805
5
F
104
K
4
T
Capacitance Capacitance
Failure
Terminations
Tolerance
Code (In pF)
Rate
T = Plated Ni
J = ± 5%
4 = Automotive
2 Sig. Digits +
and Sn
K = ±10%
A = Not
Number of
Z = FLEXITERM®
M = ± 20%
Applicable U = Conductive
Zeros
e.g. 10μF =
Epoxy for
106
Hybrid apps
NOTE: Contact factory for availability of Termination and Tolerance Options for Specific Part Numbers.
Size
0603
0805
1206
Voltage
16V = Y
25V = 3
50V = 5
100V = 1
Dielectric
X8R = F
X8L = L
X8R
SIZE
331
471
681
102
152
222
332
472
682
103
153
223
333
473
683
104
154
224
334
474
684
105
SIZE
Letter
Max.
Thickness
25V
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
0805
50V
G
G
G
G
G
G
G
G
G
G
G
G
G
G
25V
50V
0603
A
0.33
(0.013)
C
0.56
(0.022)
25V
J
J
J
J
J
J
J
J
J
J
J
J
J
J
N
N
N
N
25V
1206
50V
J
J
J
J
J
J
J
J
J
J
J
J
J
J
N
N
N
25V
50V
25V
G
0.90
(0.035)
SIZE
50V
J
J
J
J
J
J
J
J
J
J
J
M
M
M
M
M
M
0805
E
0.71
(0.028)
PAPER
A
Packaging
2 = 7" Reel
4 = 13" Reel
Special
Code
A = Std.
Product
X8L
0603
WVDC
Cap
330
(pF)
470
680
1000
1500
2200
3300
4700
6800
Cap 0.01
(μF) 0.015
0.022
0.033
0.047
0.068
0.1
0.15
0.22
0.33
0.47
0.68
1
WVDC
2
J
J
J
J
J
J
J
J
J
J
J
M
M
M
M
M
331
471
681
102
152
222
332
472
682
103
153
223
333
473
683
104
154
224
334
474
684
105
50V
1206
J
0.94
(0.037)
K
1.02
(0.040)
M
1.27
(0.050)
0603
WVDC
Cap
330
(pF)
470
680
1000
1500
2200
3300
4700
6800
Cap 0.01
(μF) 0.015
0.022
0.033
0.047
0.068
0.1
0.15
0.22
0.33
0.47
0.68
1
WVDC
25V
G
G
G
G
G
G
25V
50V
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
50V
SIZE
0603
N
1.40
(0.055)
P
Q
1.52
1.78
(0.060)
(0.070)
EMBOSSED
0805
100V
G
G
G
G
G
G
G
G
G
G
25V
J
J
J
J
J
J
J
N
N
N
100V
25V
1206
50V
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
N
N
100V
J
J
J
J
J
J
J
J
J
J
J
J
N
N
50V
100V
16V
J
J
J
M
M
M
16V
0805
X
2.29
(0.090)
25V
50V
100V
J
J
M
M
J
J
J
J
J
J
J
J
J
J
J
J
J
J
P
P
J
J
J
J
J
J
J
J
J
J
J
M
Q
Q
Q
25V
50V
100V
1206
Y
2.54
(0.100)
Z
2.79
(0.110)
= AEC-Q200
Qualified
www.avx.com | 31
X8R/X8L Dielectric
General Specifications
APPLICATIONS FOR X8R AND X8L CAPACITORS
•
•
•
•
All market sectors with a 150°C requirement
Automotive on engine applications
Oil exploration applications
Hybrid automotive applications
– Battery control
– Inverter / converter circuits
– Motor control applications
– Water pump
• Hybrid commercial applications
– Emergency circuits
– Sensors
– Temperature regulation
ADVANTAGES OF X8R AND X8L MLC
CAPACITORS
• Both ranges are qualified to the highest automotive
AEC-Q200 standards
• Excellent reliability compared to other capacitor
technologies
• RoHS compliant
• Low ESR / ESL compared to other technologies
• Tin solder finish
• FLEXITERM® available
• Epoxy termination for hybrid available
• 100V range available
ENGINEERING TOOLS FOR HIGH VOLTAGE MLC CAPACITORS
•
•
•
•
Samples
Technical Articles
Application Engineering
Application Support
X8R/X8L Dielectric
0805, 50V, X8R/X8L Typical Temperature Coefficient
10.00
X8R
Cap change %
0.00
-10.00
X8L
-20.00
-30.00
-40.00
-50.00
-55 -35 -15
0
20
25
35
45
65 85 105 125 130 135 140 150
Temperature (°C)
32 | www.avx.com
X8R/X8L Dielectric
General Specifications
Parameter/Test
Operating Temperature Range
Capacitance
Insulation Resistance
X8R/X8L Specification Limits
-55ºC to +150ºC
Within specified tolerance
≤ 2.5% for ≥ 50V DC rating
≤ 3.5% for 25V DC and 16V DC rating
100,000MΩ or 1000MΩ - μF,
whichever is less
Dielectric Strength
No breakdown or visual defects
Dissipation Factor
Resistance to
Flexure
Stresses
Appearance
Capacitance
Variation
Dissipation
Factor
Insulation
Resistance
Solderability
Resistance to
Solder Heat
Thermal
Shock
Load Life
Load
Humidity
Appearance
Capacitance
Variation
Dissipation
Factor
Insulation
Resistance
Dielectric
Strength
Appearance
Capacitance
Variation
Dissipation
Factor
Insulation
Resistance
Dielectric
Strength
Appearance
Capacitance
Variation
Dissipation
Factor
Insulation
Resistance
Dielectric
Strength
Appearance
Capacitance
Variation
Dissipation
Factor
Insulation
Resistance
Dielectric
Strength
No defects
≤ ±12%
Measuring Conditions
Temperature Cycle Chamber
Freq.: 1.0 kHz ± 10%
Voltage: 1.0Vrms ± .2V
Charge device with rated voltage for
120 ± 5 secs @ room temp/humidity
Charge device with 300% of rated voltage for
1-5 seconds, w/charge and discharge current
limited to 50 mA (max)
Note: Charge device with 150% of rated
voltage for 500V devices.
Deflection: 2mm
Test Time: 30 seconds
1mm/sec
Meets Initial Values (As Above)
≥ Initial Value x 0.3
≥ 95% of each terminal should be covered
with fresh solder
No defects, <25% leaching of either end terminal
90 mm
Dip device in eutectic solder at 230 ± 5ºC
for 5.0 ± 0.5 seconds
≤ ±7.5%
Meets Initial Values (As Above)
Dip device in eutectic solder at 260ºC for 60
seconds. Store at room temperature for 24 ± 2
hours before measuring electrical properties.
Meets Initial Values (As Above)
Meets Initial Values (As Above)
No visual defects
Step 1: -55ºC ± 2º
30 ± 3 minutes
≤ ±7.5%
Step 2: Room Temp
≤ 3 minutes
Meets Initial Values (As Above)
Step 3: +125ºC ± 2º
30 ± 3 minutes
Meets Initial Values (As Above)
Step 4: Room Temp
≤ 3 minutes
Meets Initial Values (As Above)
Repeat for 5 cycles and measure after
24 ± 2 hours at room temperature
No visual defects
≤ ±12.5%
≤ Initial Value x 2.0 (See Above)
≥ Initial Value x 0.3 (See Above)
Meets Initial Values (As Above)
No visual defects
≤ ±12.5%
Charge device with 1.5 rated voltage (≤ 10V) in
test chamber set at 150ºC ± 2ºC
for 1000 hours (+48, -0)
Remove from test chamber and stabilize
at room temperature for 24 ± 2 hours
before measuring.
Store in a test chamber set at 85ºC ± 2ºC/
85% ± 5% relative humidity for 1000 hours
(+48, -0) with rated voltage applied.
≤ Initial Value x 2.0 (See Above)
≥ Initial Value x 0.3 (See Above)
Remove from chamber and stabilize at
room temperature and humidity for
24 ± 2 hours before measuring.
Meets Initial Values (As Above)
www.avx.com | 33
MLCC with FLEXITERM®
GENERAL SPECIFICATIONS
With increased requirements from the automotive industry for additional
component robustness, AVX recognized the need to produce a MLCC with
enhanced mechanical strength. It was noted that many components may
be subject to severe flexing and vibration when used in various under the
hood automotive and other harsh environment applications.
To satisfy the requirement for enhanced mechanical strength, AVX had to
find a way of ensuring electrical integrity is maintained whilst external
forces are being applied to the component. It was found that the structure
of the termination needed to be flexible and after much research and
development, AVX launched FLEXITERM®. FLEXITERM® is designed to
enhance the mechanical flexure and temperature cycling performance of a
standard ceramic capacitor with an X7R dielectric. The industry
standard for flexure is 2mm minimum. Using FLEXITERM®, AVX
provides up to 5mm of flexure without internal cracks. Beyond
5mm, the capacitor will generally fail “open”.
As well as for automotive applications FLEXITERM® will provide Design
Engineers with a satisfactory solution when designing PCB’s which may be
subject to high levels of board flexure.
APPLICATIONS
High Flexure Stress Circuit Boards
• e.g. Depanelization: Components near
edges of board.
Variable Temperature Applications
• Soft termination offers improved reliability
performance in applications where there is
temperature variation.
• e.g. All kind of engine sensors: Direct
connection to battery rail.
Automotive Applications
• Improved reliability.
• Excellent mechanical performance and
thermo mechanical performance.
PRODUCT ADVANTAGES
• High mechanical performance able to withstand, 5mm bend test
guaranteed.
• Increased temperature cycling performance, 3000 cycles and beyond.
• Flexible termination system.
• Reduction in circuit board flex failures.
• Base metal electrode system.
• Automotive or commercial grade products available.
HOW TO ORDER
0805
5
F
104
K
Style
0603
0805
1206
Voltage
6 = 6.3V
Z = 10V
Y = 16V
3 = 25V
5 = 50V
1 = 100V
2 = 200V
Dielectric
F = X8R
Capacitance
Code (In pF)
2 Sig Digits +
Number of Zeros
e.g., 104 = 100nF
Capacitance
Tolerance
J = ±5%*
K = ±10%
M = ±20%
*≤1μF only
A
Z
Failure
Terminations
Rate
Z = FLEXITERM®
A=Commercial For FLEXITERM®
4 = Automotive with Tin/Lead
termination see
AVX LD Series
2
A
Packaging
2 = 7" reel
4 = 13" reel
Special Code
A = Std. Product
NOTE: Contact factory for availability of Tolerance Options for Specific Part Numbers.
LEAD-FREE COMPATIBLE
COMPONENT
For RoHS compliant products,
please select correct termination style.
34 | www.avx.com
MLCC with FLEXITERM®
Specifications and Test Methods
BOARD BEND TEST PROCEDURE
PERFORMANCE TESTING
According to AEC-Q200
AEC-Q200 Qualification:
• Created by the Automotive
Electronics Council
• Specification defining
stress test qualification for
passive components
Testing:
Key tests used to compare soft termination to
AEC-Q200 qualification:
• Bend Test
• Temperature Cycle Test
Test Procedure as per AEC-Q200:
Sample size:
20 components
Span: 90mm
Minimum deflection spec: 2 mm
LOADING
KNIFE
• Components soldered onto FR4 PCB (Figure 1)
MOUNTING
ASSEMBLY
• Board connected electrically to the test equipment
(Figure 2)
DIGITAL
CALIPER
BEND TESTPLATE
CONNECTOR
CONTROL
PANEL
CONTROL PANEL
Fig 1 - PCB layout with electrical connections
BOARD BEND TEST RESULTS
Fig 2 - Board Bend test
equipment
0603
Substrate Bend (mm)
NPO
X7R
X7R soft term
1206
12
10
8
6
4
2
0
NPO
X7R
0805
Substrate Bend (mm)
12
10
8
6
4
2
0
12
10
8
6
4
2
0
Substrate Bend (mm)
Substrate Bend (mm)
AEC-Q200 Vrs AVX FLEXITERM® Bend Test
12
10
8
6
4
2
0
NPO
X7R
AVX ENHANCED SOFT
TERMINATION BEND TEST
PROCEDURE
X7R soft term
1210
X7R soft term
NPO
X7R
Bend Test
The capacitor is soldered to the printed circuit
board as shown and is bent up to 10mm at
1mm per second:
Max. = 10mm
X7R soft term
TABLE SUMMARY
90mm
Typical bend test results are shown below:
Style
Conventional Termination
FLEXITERM®
0603
>2mm
>5mm
0805
>2mm
>5mm
1206
>2mm
>5mm
TEMPERATURE CYCLE TEST PROCEDURE
Test Procedure as per AEC-Q200:
The test is conducted to determine the resistance of the
component when it is exposed to extremes of alternating
high and low temperatures.
• Sample lot size quantity 77 pieces
• TC chamber cycle from -55ºC to +125ºC for 1000 cycles
• Interim electrical measurements at 250, 500, 1000 cycles
• Measure parameter capacitance dissipation factor,
insulation resistance
Test Temperature Profile (1 cycle)
+1250 C
+250 C
• The board is placed on 2 supports 90mm
apart (capacitor side down)
• The row of capacitors is aligned with the
load stressing knife
Max. = 10mm
• The load is applied and the deflection
where the part starts to crack is recorded
(Note: Equipment detects the start of the
crack using a highly sensitive current detection circuit)
• The maximum deflection capability is 10mm
-550 C
1 hour 12mins
www.avx.com | 35
MLCC with FLEXITERM®
Specifications and Test Methods
BEYOND 1000 CYCLES: TEMPERATURE CYCLE TEST RESULTS
0603
10
8
% Failure
% Failure
8
6
4
2
0
6
4
2
0
0
500 1000 1500 2000 2500 3000
0
1206
10
500 1000 1500 2000 2500 3000
1210
10
8
% Failure
8
% Failure
0805
10
6
4
2
0
6
4
2
0
0
500 1000 1500 2000 2500 3000
0
Soft Term - No Defects up to 3000 cycles
500 1000 1500 2000 2500 3000
AEC-Q200 specification states
1000 cycles compared to AVX
3000 temperature cycles.
FLEXITERM® TEST SUMMARY
• Qualified to AEC-Q200 test/specification with the exception of using AVX 3000 temperature cycles (up to +150°C
bend test guaranteed greater than 5mm).
• FLEXITERM® provides improved performance compared to
standard termination systems.
WITHOUT SOFT TERMINATION
Major fear is of latent board flex failures.
36 | www.avx.com
• Board bend test improvement by a factor of 2 to 4 times.
• Temperature Cycling:
– 0% Failure up to 3000 cycles
– No ESR change up to 3000 cycles
WITH SOFT TERMINATION
Far superior mechanical performance.
Generally open failure mode beyond
5mm flexure.
MLCC with FLEXITERM®
X8R Dielectric Capacitance Range
SIZE
271
331
471
681
102
152
182
222
272
332
392
472
562
682
822
103
123
153
183
223
273
333
393
473
563
683
823
104
124
154
184
224
274
334
394
474
684
824
105
Cap
(pF)
Cap
(μF)
0603
25V
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
WVDC
270
330
470
680
1000
1500
1800
2200
2700
3300
3900
4700
5600
6800
8200
0.01
0.012
0.015
0.018
0.022
0.027
0.033
0.039
0.047
0.056
0.068
0.082
0.1
0.12
0.15
0.18
0.22
0.27
0.33
0.39
0.47
0.68
0.82
1
WVDC
25V
SIZE
Letter
Max.
Thickness
A
0.33
(0.013)
0805
25V
50V
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
N
N
N
N
N
N
N
N
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
N
N
N
N
N
N
50V
25V
0603
C
0.56
(0.022)
E
0.71
(0.028)
PAPER
G
0.90
(0.035)
J
0.94
(0.037)
1206
50V
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
50V
25V
50V
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
M
M
M
M
M
M
M
M
M
M
M
M
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
M
M
M
M
M
M
M
M
M
M
25V
0805
K
1.02
(0.040)
M
1.27
(0.050)
N
1.40
(0.055)
50V
1206
P
Q
1.52
1.78
(0.060)
(0.070)
EMBOSSED
X
2.29
(0.090)
Y
2.54
(0.100)
Z
2.79
(0.110)
= AEC-Q200 Qualified
www.avx.com | 37
MLCC Tin/Lead Termination “B”
General Specification
AVX Corporation will support those customers for
commercial and military Multilayer Ceramic Capacitors with
a termination consisting of 5% minimum lead. This
termination is indicated by the use of a “B” in the 12th
position of the AVX Catalog Part Number. This fulfills AVX’s
commitment to providing a full range of products to our
customers. AVX has provided in the following pages a full
range of values that we are currently offering in this special
“B” termination. Please contact the factory if you require
additional information on our MLCC Tin/Lead Termination
“B” products.
Not RoHS Compliant
PART NUMBER
LD05
5
A
101
Size
LD02 - 0402
LD03 - 0603
LD04 - 0504*
LD05 - 0805
LD06 - 1206
LD10 - 1210
LD12 - 1812
LD13 - 1825
LD14 - 2225
LD20 - 2220
Voltage
6.3V = 6
10V = Z
16V = Y
25V = 3
35V = D
50V = 5
100V = 1
200V = 2
500V = 7
Dielectric
C0G (NP0) = A
X8R = F
Capacitance
Code (In pF)
2 Sig. Digits +
Number of
Zeros
J
B
C
D
F
G
J
K
M
A
B
2
Capacitance
Failure
Terminations
Packaging
Tolerance
Rate
2 = 7" Reel
B = 5% min lead
= ±.10 pF (<10pF) A = Not
4 = 13" Reel
= ±.25 pF (<10pF) Applicable
7 = Bulk Cass.
= ±.50 pF (<10pF)
9 = Bulk
= ±1% (≥ 10 pF)
= ±2% (≥ 10 pF)
Contact Factory
= ±5%
For
= ±10%
Multiples
= ±20%
*LD04 has the same CV ranges as LD03.
NOTE: Contact factory for availability of Tolerance Options for Specific Part Numbers.
Contact factory for non-specified capacitance values.
38 | www.avx.com
See FLEXITERM® section
for CV options
A
Special
Code
A = Std.
Product
MLCC Tin/Lead Termination “B”
NP0 Dielectric Capacitance Range
PREFERRED SIZES ARE SHADED
SIZE
LD02
LD03
LD05
LD06
Soldering
Packaging
Reflow/Wave
All Paper
Reflow/Wave
All Paper
Reflow/Wave
Paper/Embossed
Reflow/Wave
Paper/Embossed
1.00 ± 0.10
(0.040 ± 0.004)
0.50 ± 0.10
(0.020 ± 0.004)
0.25 ± 0.15
(0.010 ± 0.006)
16
25
50
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
1.60 ± 0.15
(0.063 ± 0.006)
0.81 ± 0.15
(0.032 ± 0.006)
0.35 ± 0.15
(0.014 ± 0.006)
25
50
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
Cap
(μF)
䉲
A
0.33
(0.013)
L
W
䉲
䉲
Letter
Max.
Thickness
䉲
SIZE
16
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
100
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
16
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
25
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
100
16
25
200
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
M
M
M
M
M
16
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
M
M
M
25
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
M
M
M
200
16
25
3.20 ± 0.20
(0.126 ± 0.008)
1.60 ± 0.20
(0.063 ± 0.008)
0.50 ± 0.25
(0.020 ± 0.010)
50
100
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
M
M
M
M
P
M
P
M
P
M
P
M
P
M
200
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
M
Q
Q
Q
500
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
M
M
M
M
M
M
P
200
500
䉲
Cap
(pF)
䉲
(t) Terminal
2.01 ± 0.20
(0.079 ± 0.008)
1.25 ± 0.20
(0.049 ± 0.008)
0.50 ± 0.25
(0.020 ± 0.010)
50
100
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
N
N
T
䉲
(W) Width
mm
(in.)
mm
(in.)
mm
(in.)
WVDC
0.5
1.0
1.2
1.5
1.8
2.2
2.7
3.3
3.9
4.7
5.6
6.8
8.2
10
12
15
18
22
27
33
39
47
56
68
82
100
120
150
180
220
270
330
390
470
560
680
820
1000
1200
1500
1800
2200
2700
3300
3900
4700
5600
6800
8200
0.010
0.012
0.015
0.018
0.022
0.027
0.033
0.039
0.047
0.068
0.082
0.1
WVDC
䉲
(L) Length
16
25
50
t
16
LD02
C
0.56
(0.022)
25
50
LD03
E
0.71
(0.028)
PAPER
G
0.90
(0.035)
J
0.94
(0.037)
50
100
LD05
K
1.02
(0.040)
M
1.27
(0.050)
N
1.40
(0.055)
50
100
LD06
P
Q
1.52
1.78
(0.060)
(0.070)
EMBOSSED
X
2.29
(0.090)
Y
2.54
(0.100)
Z
2.79
(0.110)
www.avx.com | 39
MLCC Tin/Lead Termination “B”
NP0 Dielectric Capacitance Range
PREFERRED SIZES ARE SHADED
LD10
LD12
LD13
LD14
Reflow Only
Paper/Embossed
Reflow Only
All Embossed
Reflow Only
All Embossed
Reflow Only
All Embossed
3.20 ± 0.20
(0.126 ± 0.008)
2.50 ± 0.20
(0.098 ± 0.008)
0.50 ± 0.25
(0.020 ± 0.010)
50
100
200
4.50 ± 0.30
(0.177 ± 0.012)
3.20 ± 0.20
(0.126 ± 0.008)
0.61 ± 0.36
(0.024 ± 0.014)
50
100
200
4.50 ± 0.30
(0.177 ± 0.012)
6.40 ± 0.40
(0.252 ± 0.016)
0.61 ± 0.36
(0.024 ± 0.014)
100
5.72 ± 0.25
(0.225 ± 0.010)
6.35 ± 0.25
(0.250 ± 0.010)
0.64 ± 0.39
(0.025 ± 0.015)
100
Cap
(pF)
25
50
200
50
䉲
L
䉲
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
25
50
J
J
J
J
J
J
J
J
J
J
M
M
J
J
J
J
M
M
M
Q
Q
100
200
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
M
M
M
M
M
M
M
M
500
K
K
K
K
K
K
K
K
K
K
K
K
K
K
M
M
M
M
M
M
M
M
M
K
K
K
K
K
K
K
K
K
K
K
M
M
M
M
M
M
M
M
M
M
M
M
25
50
LD10
A
0.33
(0.013)
500
200
W
䉲
SIZE
Letter
Max.
Thickness
500
䉲
Cap
(μF)
25
䉲
(t) Terminal
䉲
(W) Width
mm
(in.)
mm
(in.)
mm
(in.)
WVDC
0.5
1.0
1.2
1.5
1.8
2.2
2.7
3.3
3.9
4.7
5.6
6.8
8.2
10
12
15
18
22
27
33
39
47
56
68
82
100
120
150
180
220
270
330
390
470
560
680
820
1000
1200
1500
1800
2200
2700
3300
3900
4700
5600
6800
8200
0.010
0.012
0.015
0.018
0.022
0.027
0.033
0.039
0.047
0.068
0.082
0.1
WVDC
䉲
(L) Length
䉲
SIZE
Soldering
Packaging
C
0.56
(0.022)
40 | www.avx.com
E
0.71
(0.028)
PAPER
K
K
K
K
K
K
K
K
K
M
M
M
M
K
K
K
K
K
P
P
P
P
P
X
M
M
M
M
P
Q
Q
Q
Q
X
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
P
P
P
P
P
P
100
200
500
50
LD12
G
0.90
(0.035)
J
0.94
(0.037)
K
1.02
(0.040)
M
1.27
(0.050)
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
100
200
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
P
P
P
P
P
Q
Q
50
LD13
N
1.40
(0.055)
P
Q
1.52
1.78
(0.060)
(0.070)
EMBOSSED
t
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
Y
Y
P
P
P
P
P
P
P
P
P
P
P
P
P
P
Y
Y
Y
Y
100
200
LD14
X
2.29
(0.090)
Y
2.54
(0.100)
Z
2.79
(0.110)
T
MLCC Tin/Lead Termination “B”
X8R Dielectric Capacitance Range
SIZE
271
331
471
681
102
152
182
222
272
332
392
472
562
682
822
103
123
153
183
223
273
333
393
473
563
683
823
104
124
154
184
224
274
334
394
474
684
824
105
Cap
(pF)
Cap
(μF)
LD03
25V
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
WVDC
270
330
470
680
1000
1500
1800
2200
2700
3300
3900
4700
5600
6800
8200
0.01
0.012
0.015
0.018
0.022
0.027
0.033
0.039
0.047
0.056
0.068
0.082
0.1
0.12
0.15
0.18
0.22
0.27
0.33
0.39
0.47
0.68
0.82
1
WVDC
25V
SIZE
Letter
Max.
Thickness
A
0.33
(0.013)
LD05
25V
50V
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
N
N
N
N
N
N
N
N
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
N
N
N
N
N
N
50V
25V
LD03
C
0.56
(0.022)
E
0.71
(0.028)
PAPER
G
0.90
(0.035)
J
0.94
(0.037)
LD06
50V
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
G
50V
25V
50V
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
M
M
M
M
M
M
M
M
M
M
M
M
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
M
M
M
M
M
M
M
M
M
M
25V
LD05
K
1.02
(0.040)
M
1.27
(0.050)
N
1.40
(0.055)
P
Q
1.52
1.78
(0.060)
(0.070)
EMBOSSED
50V
LD06
X
2.29
(0.090)
Y
2.54
(0.100)
Z
2.79
(0.110)
www.avx.com | 41
Radial Leads/SkyCap®/AR Series
Automotive
AVX AR Series is a conformally coated radial leaded capacitor. We offer X8R dielectric,
standard, with a 50V rating.
Conformally Coated Radial Leaded MLC
Temperature Coefficients: C0G (NP0), X7R, X8R
3000, 2000, 1000, 200, 100, 50 Volts
Case Material: Epoxy
Lead Material: RoHS Compliant, 100% Tin
Qualified: to AEC-Q200, PPAP Available
Temperature Range: up to 150ºC
Dimensions: Millimeters (Inches)
W
Max.
W
Max.
H Max.
H Max.
LD
Nom.
T
Max.
1.0" Min.
1.52 (0.060)
Max.
L.S.
.762 (0.030)
LD
Nom.
Styles AR15, AR20,
AR30, AR40
T
Max.
1.0" Min.
L.S.
.762 (0.030)
See Note
Style AR21
Note: Coating clean .784 (0.031) min.
above seating plane
Drawings are for illustrative purposes only.
Actual lead form shape could vary within stated tolerances based on body size.
CHECK FOR UP-TO-DATE CATALOG AT
http://www.avx.com/docs/catalogs/skycap.pdf
HOW TO ORDER
AR21
AVX Style
5
F
Voltage Temperature
Coefficient
5 = 50V
1 = 100V
2 = 200V
A = 1000V
G = 2000V
H = 3000V
A = C0G (NP0)
C = X7R
F = X8R
104
M
4
Capacitance
Capacitance
Failure Rate
Leads
Packaging
4 = AEC-Q200
R = RoHS
Long Lead
1.0" minimum
Blank = Bulk Packaging
T = Trimmed Leads
.230"± .030"
Bulk packaging
TR1 = Tape and Reel
Packaging
AP1 = Ammopack
Packaging
First two digits are the
Tolerance
significant figures of
C0G (NP0):
X7R:
capacitance. Third digit
C = ±.25pF
J = ±5%
indicates the additional
D = ±.5pF
K = ±10%
number of zeros. For
F = ±1%
M = ±20%
example, order 100,000
(>50pF only)
pF as 104. (For values
G = ±2%
X8R:
below 10pF use “R” in
(>25pF only)
J = ±5%
place of decimal point,
J = ±5%
K = ±10%
e.g., 1R4 = 1.4pF.)
K = ±10%
M = ±20%
MARKING
FRONT
XXX
X X X
42 | www.avx.com
TR1
See packaging specification
page 46-47.
PACKAGING REQUIREMENTS
BACK
Capacitance Code
Tolerance Code
Voltage Code
Temp. Char. Code
R
XXX
A XX
3 Digit Date Code
Lot Code
AVX Logo
AR15, 20, 21, 30
AR40
Quantity per Bag
1000 Pieces
500 Pieces
Note: AR15, AR20, AR21, AR30, and AR40 available on tape and reel per EIA
specifications RS-468. See pages 42 and 43.
Radial Leads/SkyCap®/AR Series
C0G and X8R Dielectric – Size and Capacitance Specifications
C0G (NP0) DIELECTRIC
EIA Characteristic
Cap
in pF
1
10
15
22
33
39
47
68
100
150
220
330
390
470
680
1,000
1,500
2,200
3,900
4,700
6800
8200
X8R DIELECTRIC
Dimensions: Millimeters (Inches)
AVX Style
AR15
AR20
AR21
AVX “Insertable”
AR07
AR29
AR59
Width
3.81
5.08
5.08
(W)
(.150)
(.200)
(.200)
Height
3.81
5.08
5.08
(H)
(.150)
(.200)
(.200)
Thickness
2.54
3.175
3.175
(T)
(.100)
(.125)
(.125)
Lead Spacing
2.54
2.54
5.08
(L.S.)
(.100)
(.100)
(.200)
Lead Diameter
.508
.508
.508
(L.D.)
(.020)
(.020)
(.020)
Industry Preferred
WVDC
WVDC
WVDC
Values in Blue 200 100 50 200 100 50 200 100 50
AR-----A1R0D4R
AR-----A100K4R
AR-----A150K4R
AR-----A220K4R
AR-----A330K4R
AR-----A390K4R
AR-----A470K4R
AR-----A680K4R
AR-----A101K4R
AR-----A151K4R
AR-----A221K4R
AR-----A331K4R
AR-----A391K4R
AR-----A471K4R
AR-----A681K4R
AR-----A102K4R
AR-----A152K4R
AR-----A222K4R
AR-----A392K4R
AR-----A472K4R
AR-----A682K4R
AR-----A822K4R
EIA Characteristic
Dimensions: Millimeters (Inches)
AVX Style
Cap
in pF
1,000
10,000
100,000
330,000
AR20
AR21
AVX “Insertable”
AR29
Width
5.08
(W)
(.200)
Height
5.08
(H)
(.200)
Thickness
3.175
(T)
(.125)
Lead Spacing
2.54
(L.S.)
(.100)
Lead Diameter
.508
(L.D.)
(.020)
Industry Preferred
WVDC
Values in Blue 200 100 50
AR-----F102K4R
AR-----F103K4R
AR-----F104K4R
AR-----F334K4R
AR59
5.08
(.200)
5.08
(.200)
3.175
(.125)
5.08
(.200)
.508
(.020)
WVDC
200 100 50
Notes:
“Insertable” make reference to alternative AVX style using the same range of capacitance available on the matrix.
For others Styles, voltages, tolerance and lead lengths see Skycap catalog or contact factory.
Others capacitance values available upon special request.
Others styles available: AR12, AR14, AR62, AR89.
www.avx.com | 43
Radial Leads/SkyCap®
Configurations by Lead Spacing
LEAD SPACING
.100 ±.030
Dimensions: Inches (Millimeters)
AR07/SR07*
AR14/SR14
AR15/SR15*
AR20/SR20*
(T=.100)
(T=.100)
(T=.100)
(T=.125)
.200 (5.08) Max.
.150 (3.81) Max.
.250 (6.35)
Max.
.200 (5.08) Max.
.150 (3.81) Max.
.050 (1.27)
Clean Above
Seating Plane
Meniscus Free
.031 (.787) Above
Seating Plane
1.0 (25.4) Min.
.150 (3.81) Max.
.300 (7.62)
Max.
.060 (1.52)
Max.
.230 (5.84) ±.030
.100 (2.54) ±.030
.200 (5.08) Max.
1.0 (25.4) Min.
.100 (2.54) ±.030
1.0 (25.4) Min.
.060 (1.52)
Max.
.100 (2.54) ±.030
AR29/SR29*
AR62/SR62*
SR62-LP*
(T=.125)
(T=.125)
(T=.100)
.210 (5.33)
Max.
.170 (4.32)
Max.
.200 (5.08) Max.
0.04
(1.02)
.358 (9.09)
Max.
a
1.0 (25.4) Min.
0.008 ±0.002
(.203 ±.051)
1.0 (25.4) Min.
.100 (2.54) ±.030
0.100 ±.031
(2.54 ±.787)
.100 (2.54) ±.030
Leads = #22 AWG
LEAD SPACING
.271 (6.88)
Max.
0.040 (1.016)Min.
.250 (6.35) Max.
Meniscus Free
.031 (.787) Above
Seating Plane
.100 (2.54) ±.030
Leads = #22 AWG
.200 ±.030
Dimensions: Inches (Millimeters)
AR12/SR12*
SR13*
AR21/SR21*
SR21-85*
SR28*
(T=.100)
(T=.125)
(T=.125)
(T=.125)
(T=.125)
.200 (5.08) Max.
.200 (5.08) Max.
.150 (3.81) Max.
.150 (3.81)
Max.
.200 (5.08) Max.
.230 (5.84) Max.
1.0 (25.4) Min.
Meniscus Free
.031 (.787) Above
Seating Plane
.350 (8.89) Max.
.200 (5.08) ±.030
.031 (.787)
Clean
Above Seat
.200 (5.08) Max.
.300 (7.62) Max.
.300 (7.62) Max.
Meniscus Free
.031 (.787) Above
Seating Plane
1.0 (25.4) Min.
.200 (5.08) Max.
.250 (6.35) Max.
Meniscus Free
.031 (.787) Above
Seating Plane
1.0 (25.4) Min.
1.0 (25.4) Min.
1.0 (25.4) Min.
.200 (5.08) ±.030
.200 (5.08) ±.030
.200 (5.08) ±.030
.200 (5.08) ±.030
AR30/SR30*
SR30-LP*
AR32/SR32*
AR40/SR40*
AR59/SR59*
(T=.150)
(T=.150)
(T=.150)
(T=.150)
(T=.125)
.300 (7.62) Max.
.300
(7.62)
MAX.
.300 (7.62) Max.
.225
(5.71)
MAX.
.300 (7.62) Max.
1.0 (25.4) Min.
1.0
(25.4)
Min.
.059 (1.5)
Max.
.060 (1.52)
Max.
.400 (10.16) Max.
.390 (9.91) Max.
Meniscus Free
.031 (.787) Above
Seating Plane
.200 (5.08) Max.
.400 (10.16) Max.
.031 (.787)
Clean
Above Seat
.300 (7.62) Max.
1.0 (25.4) Min.
.200 (5.08) ±.030
.200 (5.08) ±.030
.200 (5.08) ±.030
1.0 (25.4) Min.
1.0 (25.4) Min.
.060 (1.52)
Max.
.200 (5.08) ±.030
.200 (5.08) ±.030
SR61
SR63*
SR64*
SR64-LP*
AR65/SR65*
(T=.150)
(T=.150)
(T=.150)
(T=.150)
(T=.150)
.300 (7.62) Max.
.300 (7.62) Max.
.500 (12.7) Max.
.500 (12.7) Max.
Meniscus Free
.031 (.787) Above
Seating Plane
.300 (7.62)
Max.
.500 (12.7)
Max.
0.040
(1.02)
Min.
a
.137/.196
(3.48/4.98)
1.0 (25.4) Min.
.200 (5.08) ±.030
.200 (5.08) ±.030
.200 (5.08) ±.031
a = .009 ±.002
(.229 ±.051)
Leads = #22 AWG
*SL style available in all SR configurations.
44 | www.avx.com
.330 (8.38)
Max.
0.04
(1.02)
.300 (7.62)
Max.
.400 (10.16) Max.
a
1.00 (25.4) Min.
.230 (5.84) ±.030
.300 (7.62)
Max.
.268 (6.81)
Max.
1.0 (25.4) Min.
1.0 (25.4) Min.
.200 (5.08) ±.030
.200 (5.08) ±.030
Leads = #22 AWG
Radial Leads/SkyCap®
Configurations by Lead Spacing
.200 ±.030 continued
LEAD SPACING
SR65-LP*
SR67
(T=.150)
AR75/SR75*
(T=.125)
.300
(7.62)
MAX.
Dimensions: Inches (Millimeters)
AR89/SR89*
(T=.150)
Leads = #22 AWG
.200 (5.08) Max.
(T=.125)
.400 (10.16) Max.
.300 (7.62)
Max. Seated
Height
.031 (.787)
Seated
Plane
.350
(8.89)
MAX.
COATING
LIMIT
.031 (.787)
Min. Clean
Lead Above
Seat
1.0 (25.4)
Min.
.215 (5.46)
Max.
0.040
(1.02)
Min.
.400 (10.16)
Max.
.230 (5.84) ±.030
.260 (6.60)
Max.
a
.480 (12.2)
Max.
1.00 (25.4) Min.
0.025 ±0.001
(.635 ±.025)
.200 (5.08) ±.031
.200 (5.08) ±.030
.200 (5.08) ±.030
Meniscus
Free .031
(7.87) Above
Seating Plane
LEAD SPACING .250 ±.030
AR22/SR22
(T=.125)
(T=.125)
Meniscus Free
.031 (.787)
Above
Seating Plane
.200 (5.08) ±.030
SR33
(T=.150)
.390 (9.91) Max.
.200 (5.08) Max.
.300 (7.62)
Max.
.400 (10.16)
Max.
.300 (7.62)
Max.
.230 (5.84)
±.030
Leads = #22 AWG
Dimensions: Inches (Millimeters)
SR16
.200 (5.08) Max.
a = .009 ±.002
(.229 ±.051)
1.0 (25.4) Min.
1.0 (25.4)
Min.
.250 (6.35)
±.030
.230 (5.84)
±.030
.250 (6.35)
±.030
LEAD SPACING
.250 (6.35) ±.030
.300 ±.030
SR27
SR34
(T=.150)
(T=.150)
.260 (6.60) Max.
.300 (7.62) Max.
Meniscus
Free .031
(.787)
Above
Seating
Plane
.250 (6.35)
Max.
1.0 (25.4)
Min.
Meniscus
Free .031
(.787)
Above
Seating
Plane
.350 (8.89)
Max.
1.0 (25.4)
Min.
.300 (7.62) ±.030
.300 (7.62) ±.030
.375 ±.030
LEAD SPACING
LEAD SPACING
.400 ±.030
AR38/SR38*
SR50*
SR76*
(T=.150)
(T=.200)
(T=.175)
.500 (12.7)
Max.
.500 (12.7) Max.
.300 (7.62) Max.
Meniscus Free
.031 (.787)
Above
Seating Plane
.500 (12.7)
Max.
.425 (10.8)
Max.
1.0 (25.4)
Min.
1.0 (25.4)
Min.
.060 (1.52)
Max.
.440 (11.2)
Max.
.031 (.787)
Min.
Clean Lead
Above Seat
.375 (9.53) ±.030
.480 (12.2)
Max.
Seating Plane
1.0 (25.4)
Min.
.025 (0.64)
±.004
.400 (10.16)
±.030
.400 (10.16) ±.030
Leads = #22 AWG
NOTES:
1. All leads are #24 AWG unless otherwise noted.
2. Available in tape and reel packaging(*).
3. Other styles are also available, contact factory.
4. (T = XXX) under type designation is maximum thickness in inches.
*SL style available in all SR configurations.
Drawings are for illustrative purposes only.
Actual lead form shape could vary within stated tolerances based on body size.
www.avx.com | 45
Radial Leads/SkyCap®
Packaging – Tape and Reel
GENERAL INFORMATION
THE INSERTABLES
1. Standard reel diameter is 355 millimeters (14 inches) maximum.
STANDARD 1
2. Reeling standard (#1 or #2) should be specified when ordering.
32 mm max.
HOW TO ORDER
16 ± 0.5 mm
To specify tape and reel packaging, add TR1, TR2 or TRX to the end
of the AVX 12 digit part number.
SR07
Examples:
SR29
SR59
SR65
SR75
STANDARD 2
SR215C104KARTR1
SR305E105MARTR2
SR215C103JARTRX
32 mm max.
19 mm min. to
base of unit
SR07
SR29
STANDARD 1
SR59
SR65
SR75
Dimensions in Millimeters
32 max.
32 max.
20 +1.5
-1.0
16±.5
SR28
SR29
SR12
SR21
SR13
SR32
16 min.
SR21
(TRX)
MR05
SR32
(TRX)
SR63
(TRX)
SR15
SR20
STANDARD 2
32 max.
MR06
SR30
SR40
Dimensions in Millimeters
32 max.
19 min.
19 min.
SR29
SR28
SR12
SR21
SR13
SR32
SR15
SR20
MR05
S
T
S
K
E
D
R
C
W
A
B
F
O
46 | www.avx.com
N
M
SR30
SR40
DESCRIPTION
DIMENSIONS (MM)
A. Feed Hole Pitch
B. Feed Hole Diameter
C. Feed Hole Location
12.70 ± .20
3.99 ± .20
9.02 ± .51
D. Component Lead Spacing
+.79
5.00+.79
-.20 or 2.54 -.20
E. Component Lead Location
3.81 ±.51 or 5.00 ±.51
for 2.54 lead spacing
2.00 maximum
F. Component Lead Protrusion
(edge of carrier to cut end of lead)
K. Component Body Location
Q
L
MR06
X
L. Carrier Tape Width
M. Carrier Tape Assembly Thickness
N. Carrier Tape Spliced Thickness
O. Carrier Tape Spliced Length
Q. Adhesive Tape Border
R. Component Bent Leads (either direction)
S. Component Misalignment
T. Component Pitch
W. Adhesive Tape Width
X. Carrier Tape Thickness
Y. Cumulative Pitch over 20 Pitches
6.35 ±.41
18.01 +1.02
-.51
.71 ± .20
1.42 maximum
50.80 - 88.90
3.00 maximum
.79 maximum
.99 maximum
12.70 ±.99
5.00 minimum
.51 ±.10
254 ±2.00
Radial Leads/SkyCap®
Packaging – Tape and Reel
REEL DIRECTION
QUANTITY PER REEL SR/AR
Leads on top of
carrier strip,
body away
Unreel from
LEFT to RIGHT
OVER TOP of reel
PART
PCS
SR15, 07, 12
3500
SR20, 21, 23, 28
13, 29, 59, 62, 89
3000
SR30, 32, 40, 63, 64
65, 75
2000
MR05, 06
2500
*SL style available in all SR configurations.
G
DESCRIPTION
A – Reel Diameter
B – Reel Outside Width
C – Reel Inside Width
D – Core Diameter (O.D.)
E – Hub Recess Diameter
F – Hub Recess Depth
G – Arbor Hole Diameter
A
F
DIMENSIONS (MM)
304.80 - 355
50.80 maximum
38.10 - 46.02
102.01 maximum
86.36 maximum
9.50 minimum
25.40 - 30.48
D
C
B
E
CONVERSION TABLE
MM
.10
.20
.38
.41
.51
.71
.79
.99
1.02
1.42
IN
.004
.007
.015
.016
.020
.028
.031
.039
.040
.056
MM
1.52
2.00
2.54
3.00
3.18
3.48
3.81
3.99
4.45
4.98
IN
MM
IN
MM
.060
.079
.100
.118
.125
.137
.150
.157
.175
.196
5.00
5.08
6.22
6.35
6.60
6.99
7.62
8.89
9.02
9.50
.197
.200
.245
.250
.260
.275
.300
.350
.355
.374
9.91
10.03
10.16
11.68
12.50
12.70
16.00
18.01
25.40
30.48
IN
.390
.395
.400
.460
.492
.500
.630
.709
1.000
1.200
MM
32.00
38.10
46.02
50.80
86.36
88.90
102.01
254.00
304.80
355.00
IN
1.260
1.500
1.812
2.000
3.400
3.500
4.016
10.000
12.000
14.000
www.avx.com | 47
SWITCHED MODE
POWER SUPPLY
(SMPS) CAPACITORS
AVX SMPS capacitors utilize
multilayer ceramic capacitor
technology to achieve higher
capacitance, voltage and
high resistance to harsh high
temperature environments.
Innovative solutions include:
• SMX SMPS Stacked MLCCs
AVX SMX capacitors are stacked
SMPS capacitors ideally suited
for high temperature applications
up to +200ºC. The wide product
offering provides designers with
solutions exhibiting high
capacitance and high voltage
ratings that are rated up to
+200ºC.
• SXP SMPS Molded Radial
MLCCs
AVX encapsulated radial leaded
MLCCs ideally suited for high
temperature applications up to
+200ºC. This product offers
mechanical protection to the
ceramic element ensuring reliable
operation in harsh environment
applications.
A KYOCERA GROUP COMPANY
SMPS Stacked MLC Capacitors
SMX Style for High Temperature Applications up to 200ºC
SMX-style, stacked Switch Mode Power Supply Capacitors (SMPS) utilizing Multilayer
Ceramic (MLCC) construction are ideally suited for high temperature applications up to
200ºC. This product is intended for downhole oil exploration, including logging while
drilling, geophysical probes, as well as space and aerospace electronics. The high
temperature solder utilized in the construction of SMX-style parts assures reliable operation
in harsh environments. The wide product offering provides designers a solution for high
capacitance value and high voltage capacitors rated at 200ºC. The SMX-style capacitors
are ideally suited for applications as DC filters in high power, high frequency motor drives,
high pulsed-current circuitry, as well as low power electronics.
SMX-style, SMPS capacitors are characterized with excellent performance in comparison
to wet tantalum products. The main benefits of SMX-product over wet tantalum capacitors
include:
•
•
•
•
•
Much lower ESR and lower losses
Excellent capacitance retention with frequency
Excellent high frequency performance
Low DC leakage current
Much higher current handling capabilities
CHECK FOR UP-TO-DATE DATASHEET AT
http://www.avx.com/docs/catalogs/smx.pdf
ELECTRICAL SPECIFICATIONS
Temperature Coefficient
C0G:
A Temperature Coefficient
X7R/X9U: C Temperature Coefficient
0 ±30 ppm/°C, -55° to +200°C
±15%, -55°C to +125°C
+15% - 56%, -55ºC to +200°C
Capacitance Test (MIL-STD-202 Method 305)
25°C, 1.0±0.2 Vrms (open circuit voltage) at 1KHz
Dissipation Factor 25°C
C0G:
0.15% Max @ 25°C, 1.0±0.2 Vrms (open circuit voltage) at 1KHz
X7R/X9U: 2.5% Max @ 25°C, 1.0±0.2 Vrms (open circuit voltage) at 1KHz
Dielectric Withstanding Voltage 25°C (Flash Test)
250% rated voltage for 5 seconds with 50 mA max
charging current. (500 Volt units @ 750 VDC)
Moisture Resistance (MIL-STD-202 Method 106)
Ten cycles with no voltage applied.
Thermal Shock (MIL-STD-202 Method 107, Condition A)
Immersion Cycling (MIL-STD-202 Method 104, Condition B)
Insulation Resistance 25°C (MIL-STD-202 Method 302)
100K MΩ or 1000 MΩ-μF, whichever is less.
Resistance To Solder Heat (MIL-STD-202, Method 210,
Condition B, for 20 seconds)
Insulation Resistance 125°C (MIL-STD-202 Method 302)
10K MΩ or 100 MΩ-μF, whichever is less.
HOW TO ORDER
Insulation Resistance 200°C (MIL-STD-202 Method 302)
100 MΩ or 1 MΩ -μF, whichever is less.
AVX Styles: SMX1, SMX2, SMX3, SMX4, SMX5, SMX6
SMX
1
7
C
106
M
A
N
650
AVX Style
SMX = Uncoated
Size
Voltage
3 = 25V
5 = 50V
1 = 100V
2 = 200V
7 = 500V
Temperature
Coefficient
C0G = A
X7R/X9U = C
Capacitance
Code
(2 significant digits
+ number of zeros)
10 pF = 100
100 pF = 101
1,000 pF = 102
22,000 pF = 223
220,000 pF = 224
1μF = 105
10 μF = 106
100 μF = 107
Capacitance
Tolerance
C0G:
J = ±5%
K = ±10%
M = ±20%
X7R:
K = ±10%
M = ±20%
Z = +80%, -20%
Test Level
A = Standard
Termination
N = Straight Lead
J = Leads formed in
L = Leads formed out
P = P Style Leads
Z = Z Style Leads
Height
Max
Dimension “A”
120 = 0.120"
240 = 0.240"
360 = 0.360"
480 = 0.480"
650 = 0.650"
Note: Capacitors with X7R/X9U dielectric is not intended for
applications across AC supply mains or AC line filtering
with polarity reversal. Contact plant for recommendations.
Not RoHS Compliant
www.avx.com | 49
SMPS Stacked MLC Capacitors
SMX Style for High Temperature Applications up to 200ºC
Typical Extended Temperature TCC
Characterization of C0G, SMPS Capacitors
Test conditions: 1 Vrms, 1 kHz, 0 VDC bias
Typical Extended Temperature TCC
Characterization of VHT, SMPS Capacitors
Test conditions: 1 Vrms, 1 kHz, 0 VDC bias
1.0
Percentage Capacitance
Change
20
0.8
Percentage Capacitance
Change
0.6
0.4
0.2
0.0
-0.2
0
-20
-40
-60
-80
-0.4
-100
-80
-0.6
-40
-20
0
20
40
60
80
100
120 140
160 180 200
Temperature (ºC)
-0.8
-1.0
-75
-50
-25
0
25
50
75
100
125
150
175
200
Temperature (ºC)
Typical Extended Temperature IR Characterization of
VHT, SMPS Capacitors
Typical Extended Temperature IR Characterization of
C0G, SMPS Capacitors
1000
RC Product (⍀*F)
RC Product (⍀*F)
10000
1000
100
100
10
10
120
130
140
150
160
170
Temperature (ºC)
50 | www.avx.com
180
190
200
150
160
170
180
Temperature (ºC)
190
200
SMPS Stacked MLC Capacitors
SMX Style for High Temperature Applications up to 200ºC
CHIP SEPARATION
0.254 (0.010) TYP.
D
CHIP SEPARATION
0.254 (0.010) TYP.
CAPACITOR
E
E
1.651 ± 0.254
(0.065 ± 0.010)
B
1.397 (0.055)
±0.254 (0.010)
A
R 0.508
(0.020)
3 PLACES
B
2.540 ± 0.254
(0.100 ± 0.010)
4.191 ± 0.254
(0.165 ± 0.010)
DETAIL A
6.350 (0.250) MIN
0.254
(0.010)
TYP.
0.508 (0.020) TYP.
2.54 (0.100) TYP.
C
2.54 (0.100) MAX.
0.635 (0.025) MIN.
C
0.254
(0.010)
TYP.
1.016 ± 0.254
(0.040 ± 0.010)
DETAIL A
“N” STYLE LEADS
“P” STYLE LEADS
CHIP SEPARATION
0.254 (0.010) TYP.
CHIP SEPARATION
0.254 (0.010) TYP.
D
E
E
0.254 (0.010)
RAD. (TYP.)
B
0.254 (0.010)
RAD. (TYP.)
1.397 (0.055)
±0.254 (0.010)
A
0.254 (0.010)
TYP.
1.905 (0.075)
±0.635 (0.025)
TYP.
1.778 (0.070)
0.508 (0.020) TYP.
2.54 (0.100) TYP.
±0.254 (0.010)
2.54 (0.100) MAX.
0.635 (0.025) MIN.
C
1.778 (0.070)
±0.254 (0.010)
“J” STYLE LEADS
C
“L” STYLE LEADS
1.397 (0.055)
±0.254 (0.010)
A
E
0.254 (0.010) TYP.
B
RAD.
0.254
(0.010)
(TYP)
1.270 ± 0.254
(0.050 ± 0.010)
CHIP SEPARATION
0.254 (0.010) TYP.
D
0.254 (0.010)
TYP.
1.905 (0.075)
±0.635 (0.025)
TYP.
2.794 ± 0.254
(0.110 ± 0.010)
6.35
(0.250)
MIN.
1.778 ±0.254
(0.070 ± 0.010)
C
0.508 (0.020) TYP.
2.54 (0.100) TYP.
3.048 ± 0.381
(0.120 ± 0.015)
DETAIL B
2.54 (0.100) MAX.
0.635 (0.025) MIN.
DETAIL B
“Z” STYLE LEADS
DIMENSIONS
Style
SMX1
SMX2
SMX3
SMX4
SMX5
SMX6
A (max.)
millimeters (inches)
B (max.)
For “N” Style Leads: “A” Dimension Plus 1.651 (0.065)
See page 52 for
For “J” & “L” Style Leads: “A” Dimension Plus 2.032 (0.080)
maximum “A”
For “P” Style Leads: “A” Dimension Plus 4.445 (0.175)
Dimension
For “Z” Style Leads: “A” Dimension Plus 3.048 (0.120)
C ±.635 (±0.025)
11.4
20.3
11.4
10.2
6.35
31.8
(0.450)
(0.800)
(0.450)
(0.400)
(0.250)
(1.250)
D ±.635 (±0.025)
52.1
38.4
26.7
10.2
6.35
52.1
(2.050)
(1.510)
(1.050)
(0.400)
(0.250)
(2.050)
E (max.)
12.7
22.1
12.7
11.2
7.62
34.3
(0.500)
(0.870)
(0.500)
(0.440)
(0.300)
(1.350)
No. of Leads
per side
20
15
10
4
3
20
www.avx.com | 51
SMPS Stacked MLC Capacitors
SMX Style for High Temperature Applications up to 200ºC
Max Capacitance (μF) Available Versus Style with Height (A) of 0.120" - 3.05mm
AVX
STYLE
C0G
VHT
SMX1 _ _ _ _ _ _ AN120
SMX2 _ _ _ _ _ _ AN120
25V 50V 100V 200V 500V 25V
1.0 .70 .40 .18 .068 1.2
–
18 10 3.9 1.8
–
SMX3 _ _ _ _ _ _ AN120
50V 100V 200V 500V 25V
1.0 .60 .26 .10 .50
27 15 5.6 2.7 12
SMX4 _ _ _ _ _ _ AN120
50V 100V 200V 500V 25V
.40 .20 .09 .033 .16
8.2 4.7 1.8 .82 3.9
SMX5 _ _ _ _ _ _ AN120
50V 100V 200V 500V 25V
.13 .07 .02 .01 .05
2.7 1.5 .56 .27 1.5
SMX6 _ _ _ _ _ _ AN120
50V 100V 200V 500V 25V 50V 100V 200V 500V
.04 .02 .01 .0039 3.2 2.4 1.3 .50 .20
1.0 .56 .22 .10
–
56 33 12 5.6
Max Capacitance (μF) Available Versus Style with Height (A) of 0.240" - 6.10mm
AVX
STYLE
C0G
VHT
SMX1 _ _ _ _ _ _ AN240
SMX2 _ _ _ _ _ _ AN240
SMX3 _ _ _ _ _ _ AN240
SMX4 _ _ _ _ _ _ AN240
SMX5 _ _ _ _ _ _ AN240
SMX6 _ _ _ _ _ _ AN240
25V 50V 100V 200V 500V 25V 50V 100V 200V 500V 25V 50V 100V 200V 500V 25V 50V 100V 200V 500V 25V 50V 100V 200V 500V 25V 50V 100V 200V 500V
2.0 1.4 .80 .36 .13 2.4 2.0 1.2 .52 .20 1.0 .80 .40 .18 .068 .33 .26 .14 .05 .02 .10 .08 .05 .02 .0078 6.4 4.8 2.6 1.0 .40
–
33
18 6.8 3.3
–
47 27
10 4.7 22 15 8.2 3.3 1.5 6.8 4.7 2.7 1.0 .47 2.7 1.8 1.0 .39 .18
– 100 56 22 10
Max Capacitance (μF) Available Versus Style with Height (A) of 0.360" - 9.14mm
AVX
STYLE
C0G
VHT
SMX1 _ _ _ _ _ _ AN360
SMX2 _ _ _ _ _ _ AN360
SMX3 _ _ _ _ _ _ AN360
SMX4 _ _ _ _ _ _ AN360
SMX5 _ _ _ _ _ _ AN360
SMX6 _ _ _ _ _ _ AN360
25V 50V 100V 200V 500V 25V 50V 100V 200V 500V 25V 50V 100V 200V 500V 25V 50V 100V 200V 500V 25V 50V 100V 200V 500V 25V 50V 100V 200V 500V
3.0 2.1 1.2 .54 .22 3.6 3.0 1.8 .78 .30 1.5 1.2 .60 .27 .10 .48 .39 .21 .07 .03 .15 .12 .07 .03 .011 10 7.2 3.9 1.5 .60
–
47
27
10 4.7
–
68 39
15 6.8 33 22
12 5.6 2.2 12
6.8 3.9 1.5 .68 3.9 2.7 1.5 .56 .27
– 150 82 33 15
Max Capacitance (μF) Available Versus Style with Height (A) of 0.480" - 12.2mm
AVX
STYLE
C0G
VHT
SMX1 _ _ _ _ _ _ AN480
SMX2 _ _ _ _ _ _ AN480
SMX3 _ _ _ _ _ _ AN480
SMX4 _ _ _ _ _ _ AN480
SMX5 _ _ _ _ _ _ AN480
SMX6 _ _ _ _ _ _ AN480
25V 50V 100V 200V 500V 25V 50V 100V 200V 500V 25V 50V 100V 200V 500V 25V 50V 100V 200V 500V 25V 50V 100V 200V 500V 25V 50V 100V 200V 500V
4.0 2.8 1.6 .72 .27 4.8 4.0 2.2 1.0 .40 2.0 1.6 .80 .36 .130 .64 .52 .28 .10 .04 .20 .16 .10 .04 .015 13 9.6 5.2 2.0 .80
–
68
39
15 6.8
– 100 56
22 10 47 33
18 6.8 3.3 15
10 5.6 2.2 1.0 5.6 3.9 2.2 .82 .39
– 220 120 47 22
Max Capacitance (μF) Available Versus Style with Height (A) of 0.650" - 16.5mm
AVX
STYLE
C0G
VHT
SMX1 _ _ _ _ _ _ AN650
SMX2 _ _ _ _ _ _ AN650
SMX3 _ _ _ _ _ _ AN650
SMX4 _ _ _ _ _ _ AN650
SMX5 _ _ _ _ _ _ AN650
SMX6 _ _ _ _ _ _ AN650
25V 50V 100V 200V 500V 25V 50V 100V 200V 500V 25V 50V 100V 200V 500V 25V 50V 100V 200V 500V 25V 50V 100V 200V 500V 25V 50V 100V 200V 500V
5.0 3.5 2.0 .90 .34 6.0 5.0 3.0 1.3 .50 2.5 2.0 1.0 .45 .160 .82 .65 .35 .12 .05 .25 .20 .12 .05 .019 16 12 6.5 2.5 1.0
–
82
47
18 8.2
– 120 68
27 12 56 39
22 8.2 3.9 18
12 6.8 2.7 1.2 6.8 4.7 2.7 1.0 .47
– 270 150 56 27
52 | www.avx.com
SMPS Molded Radial MLC Capacitors
SXP Style for High Temperature Applications up to 200ºC
SXP-style, encapsulated radial leaded MLC capacitors are ideally suited for high temperature applications up to 200ºC. This product is intended for downhole oil exploration, including logging while drilling, geophysical probes, as well as space, aerospace and hybrid automotive applications. This product supplements the SMX family of capacitors and offers
mechanical protection to the ceramic element in extreme harsh environment. The high temperature solder utilized in the construction of SXP-style parts assures reliable operation in
high temperature and rugged environments. The SXP-style capacitors are ideally suited for
applications as DC filters in high power, high frequency motor drives, high pulsed-current circuitry, as well as standard electronic equipment designed for high temperature applications.
SXP-style, switch mode power supply capacitors are characterized with excellent performance. The main benefits of SXP product include:
• Low ESR, low ESL
• Low DC leakage
• Excellent high frequency performance
CHECK FOR UP-TO-DATE DATASHEET AT
http://www.avx.com/docs/Catalogs/SXP.pdf
ELECTRICAL SPECIFICATIONS
Temperature Coefficient
C0G:
A Temperature Coefficient
VHT:
C Temperature Coefficient
0 ±30 ppm/°C, -55° to +200°C
±15%, -55°C to +125°C
+15% - 56%, -55ºC to +200°C
Capacitance Test (MIL-STD-202 Method 305)
25°C, 1.0±0.2 Vrms (open circuit voltage) at 1KHz
Insulation Resistance 25°C (MIL-STD-202 Method 302)
100K MΩ or 1000 MΩ-μF, whichever is less.
Insulation Resistance 125°C (MIL-STD-202 Method 302)
10K MΩ or 100 MΩ-μF, whichever is less.
Insulation Resistance 200°C (MIL-STD-202 Method 302)
1k MΩ or 10 MΩ -μF, whichever is less.
Dissipation Factor 25°C
C0G:
0.15% Max @ 25°C, 1.0±0.2 Vrms (open circuit voltage) at 1KHz
X7R/X9U: 2.5% Max @ 25°C, 1.0±0.2 Vrms (open circuit voltage) at 1KHz
Dielectric Withstanding Voltage 25°C (Flash Test)
250% rated voltage for 5 seconds with 50 mA max
charging current. (150% for 500 VDC and 120% for 1000 VDC
and higher voltage ratings)
HOW TO ORDER
SXP
3
1
C
104
AVX Style
Size
See
Dimensions
Chart
Voltage
5 = 50V
1 = 100V
2 = 200V
7 = 500V
A = 1000V
S = 1500V
G = 2000V
H = 3000V
Temperature
Coefficient
C0G = A
VHT = C
Capacitance
Code
(2 significant digits
+ number of zeros)
100 pF = 101
22,000 pF = 223
1μF = 105
M
A
A
Capacitance
Test Level
Leads
Tolerance
A = Standard A = Standard
C0G:
Sn/Pb
J = ±5%
(min. 5% Pb)
K = ±10%
M = ±20%
Not RoHS Compliant
X7R:
K = ±10%
M = ±20%
Z = +80%, -20%
Tighter tolerances
available upon
request
www.avx.com | 53
SMPS Molded Radial MLC Capacitors
SXP Style for High Temperature Applications up to 200ºC
STYLE
L
T
H
LL
LD
LS
DIMENSIONS
AVX Style
SXP1
SXP2
SXP3
SXP4
millimeters (inches)
Length (L)
±0.25 (±0.010)
8.9 (0.350)
11.4 (0.450)
12.7 (0.500)
22.4 (0.880)
Height (H)
±0.25 (±0.010)
8.9 (0.350)
11.4 (0.450
12.7 (0.500)
16.3 (0.640)
Thickness (T)
±0.25 (±0.010)
5.08 (0.200)
5.08 (0.200)
5.08 (0.200)
5.84 (0.230)
Lead Spacing
±0.76 (±0.030)
5.08 (0.200)
5.08 (0.200)
10.2 (0.400)
19.8 (0.780)
LD
±0.05 (±0.002)
0.51 (0.020)
0.51 (0.020)
0.64 (0.025)
0.81 (0.032)
CAPACITANCE RANGE
C0G
Style
SXP1 (MIN)
(MAX)
SXP2 (MIN)
(MAX)
SXP3 (MIN)
(MAX)
SXP4 (MIN)
(MAX)
50V
1000pF
.047μF
.01μF
.10μF
.01μF
.15μF
.01μF
.39μF
100V
1000pF
.027μF
1000pF
.056μF
1000pF
.068μF
.01μF
.22μF
200V
1000pF
8200pF
1000pF
.018μF
1000pF
.022μF
1000pF
.068μF
500V
100pF
4700pF
100pF
8200pF
1000pF
.012μF
1000pF
.033μF
1000V
100pF
2200pF
100pF
4700pF
1000pF
6800pF
1000pF
.018μF
1500V
100pF
1000pF
100pF
1800pF
100pF
2700pF
1000pF
8200pF
2000V
100pF
560pF
100pF
1200pF
100pF
1500pF
100pF
4700pF
3000V
100pF
270pF
100pF
560pF
100pF
1000pF
100pF
2700pF
50V
.1μF
1.5μF
.1μF
2.7μF
.01μF
3.9μF
1μF
12μF
100V
.01μF
1.0μF
.1μF
1.8μF
.1μF
2.7μF
.1μF
8.2μF
200V
.01μF
.33μF
.01μF
.68μF
.01μF
1.0μF
.1μF
2.7μF
500V
.01μF
.12μF
.01μF
.27μF
.01μF
.33μF
.01μF
1.0μF
1000V
.01μF
.056μF
.01μF
.10μF
.01μF
.15μF
.01μF
.47μF
1500V
.01μF
.022μF
.01μF
.056μF
.01μF
.082μF
.01μF
.22μF
2000V
1000pF
.012μF
.01μF
.022μF
.01μF
.033μF
.01μF
.10μF
3000V
1000pF
4700pF
1000pF
8200pF
.01μF
.015μF
.01μF
.039μF
VHT
Style
SXP1 (MIN)
(MAX)
SXP2 (MIN)
(MAX)
(MIN)
SXP3
(MAX)
SXP4 (MIN)
(MAX)
54 | www.avx.com
GLASS
DIELECTRIC
AVX glass capacitors offer optimum,
highly stable performance in harsh
environments, capacitance
retraceability, and a rugged, simple
construction to eliminate mechanical
problems.
A KYOCERA GROUP COMPANY
ET Series Glass Capacitors
Elevated Temperatures
HEAT
FEATURES
It’s the enemy of reliable, long-term circuit performance. In many applications, very high temperatures are not a
consideration in circuit design. But in a
few specialized areas, elevated temperatures create very real design problems.
That’s why AVX ET-Series capacitors
keep working at temperatures where
more ordinary capacitors usually
fail...up to 200°C.
And, of course, AVX ET-Series capacitors provide all the high performance,
high reliability characteristics you’ve
come to expect from all AVX glass
capacitors...excellent stability, outstanding capacitance retraceability,
rugged, simple construction to eliminate mechanical problems, and electrical performance specifications among
the best available at any price.
So when the heat’s on your next design
and you can’t alter the environment,
choose AVX ET-Series glass capacitors. That’ll be one less problem you’ll
have to solve.
• Available in both axial and radial
leaded configurations
• Values from 0.5 pF to 2400 pF
• Working temperature range -75°C
to 200°C
• “Burned In” versions available –
50 hours @ 1500 VDC, 25°C
• Simple, rugged design and
construction
• Short lead times for most values
STANDARD OPERATING CHARACTERISTICS OF AVX ET-SERIES
AXIAL AND RADIAL LEADED GLASS CAPACITORS
Working Temperature Range
Voltage Rating
Capacitance Range
Insulation Resistance
Dissipation Factor
Life
Short Time (1 Hour) Exposure to
Overtemperature (250°C)
Voltage Coefficient
-75°C to 200°C
50 VDC
0.5 pF to 2400 pF
@ 25°C > 100,000 Megohms
@ 200°C > 100 Megohms
@ 25°C < .1% at 1kHz
@ 200°C < 1% at 1kHz
(1000 hours at rated voltage at 200°C)
Post Test Delta C @ 25°C < 2%
DF @ 25°C < 2.5%
IR > 100 Megohms (axials)
IR > 10 Megohms (radials)
No degradation
0
TYPICAL APPLICATIONS
In general, AVX ET-Series glass
capacitors are ideally suited for any
environment where high temperature
could alter or destroy circuit performance. And since they are rated down
to -75°C, ET-Series capacitors are also
useful where cycling to colder temperatures may be a problem. Some
applications where AVX ET-Series
capacitors have already proven
themselves include:
56 | www.avx.com
• Oil, well logging and downhole
instrumentation, where frictional or
geothermal heat is a problem.
• Geophysical pressure probes.
• Missile or aerospace applications
where engine or environmental heat
needs to be monitored or may
cause circuit failure.
• Radar or other microwave applications.
• RF output circuitry where conduction or fan cooling cannot be entirely relied upon to remove all of the
heat.
• Space and satellite applications
where temperature changes are
extreme and “zero failures” are a
must.
• Industrial chemical process instrumentation where heat is a part of the
process.
• Instrumentation for monitoring atthe-tool performance in metal
cutting machinery.
• Fire-safe alarm or control circuitry.
ET Series Glass Capacitors
Elevated Temperatures
10'
+4
+2
0
-2
-4
1kHz
10kHz
100kHz
Quality Factor
10-2
10'
10-3
10'
Dissipation Factor
10K
1MHz
10
-3
10'
Dissipation
10K
100K
Frequency – mHz
10'
Se
Quality Factor
Dissipation Factor
10
1,000
10'
-2
Factor
1M
10M
100M
Quality Factor and Dissipation Factor vs. Frequency
Radial
% Capacitance Change vs. Frequency
Radial and Axial
Quality Factor
10M
Frequency in Hz
Frequency
10-1
1M
100K
Quality Factor
Dissipation Factor
% Capacitance Change
10-1
lf R
eso
na
100
nc
e
0.0
0.5 Total
1.0 lead
1.5 length
2.0 (inches)
10
100M
10
100
1,000
10,000
Capacitance – pF
Frequency in Hz
Resonant Frequency vs. Capacitance
Radial
Quality Factor and Dissipation Factor vs. Frequency
Axial
Frequency – mHz
1,000
100
0.5
10
1.0 Total
1.5 lead
2.0 length
2.5 (inches)
10
100
1,000
10,000
Capacitance – pF
Resonant Frequency vs. Capacitance
Axial
www.avx.com | 57
ET Series Glass Capacitors
Elevated Temperatures
ET10E
100
AVX ET-Series axial leaded glass capacitors* are available in
two standard case sizes and in a wide range of values and
tolerances. All feature extremely stable glass dielectric, fused
monolithic construction and true glass-to-metal hermetic
seals at the leads for moisture resistance. All case sizes conform to industry dimensional standards.
AVX
INTRODUCTION
ET15E
511J
AVX
ET10
ET15
PERFORMANCE CHARACTERISTICS
Leads on CL
within 0.79
(0.031)
W
28.58
(1.125)
Min.
L
T
DIMENSIONS:
Case
Size
ET10
ET15
millimeters (inches)
W
L
Lead Dia.
+0.1 (+0.004)
-0.03 (-0.001)
T
8.74 ± 1.19
4.37 ± 0.79
1.98 ± 0.79
(0.344 ± 0.047) (0.172 ± 0.031) (0.078 ± 0.031)
11.91 ± 1.19
6.76 ± 0.79
2.77 ± 1.19
(0.469 ± 0.047) (0.266 ± 0.031) (0.109 ± 0.047)
5.08
(0.200)
5.08
(0.200)
Weight
(grams)
.25 - .50
.75 - 1.25
Note: Standard leads are solder-coated Dumet.
MARKING
Additional performance details are given in the AVX
“Performance Characteristics of Multilayer Glass Dielectric
Capacitors” technical paper.
*Radiation Resistance to the same level as the
CY, CYR axial series.
Front
ET 10E
101J
ET
ETR
10
E
AVX
Tolerance: Available tolerances for each capacitance value
are shown in the ordering information table on following page.
Part marking codes are also provided.
Temperature Coefficient: Capacitance exhibits retraceability to within 10 ppm/°C over the temperature range -75°C to
+200°C. See graph on following page.
Voltage Coefficient: Zero
Losses: Extremely low over the entire specified operating
temperature range. Dissipation factor is 1% or less at 200°C
at 1kHz.
Life: Delta C is less than 2% after 1000 hours at rated voltage, 200°C.
Insulation Resistance: Greater than 100,000 megohms at
25°C; greater than 100 megohms at 200°C. More than 100
megohms after life-testing.
Voltage/Temperature Rating: All ET-Series capacitors are
rated at 50 VDC over their operating temperature range of
-75°C to 200°C. No derating is required.
High Voltage Stabilization Screening: A special version
of ET-Series axial leaded capacitors – designated ETR – is
available. These capacitors have been “burned in” at room
temperature for 50 hours at 1500 VDC.
Short Time Overtemperature Exposure: After exposure
to 250°C for one hour, ET-Series capacitors have continued
to perform to specification.
Moisture Resistance: Axial glass capacitors are hermetically sealed in glass, with a true metal-to-glass seal at the
leads. This construction provides practical immunity to environmental effects such as shock, moisture, salt spray and
solder heat.
= Glass Capacitor
= Glass Capacitor with “burn in”
= Case Size
= Operating Temperature Range
Back
1502
101
J
AVX
0705
= Capacitance, Coded in pF
= Tolerance
= AVX Corporation
= Date Code
HOW TO ORDER
ET
10
E
Style
Glass Capacitor
Case Size
10
15
Operating
Temperature Range
-75°C to +200°C
58 | www.avx.com
101
J
Capacitance Code
Capacitance Tolerance
C = ±.25 pF
D = ±.50 pF
F = ±1%
G = ±2%
J = ±5%
K = ±10%
M = ±20%
Capacitance Code is expressed in
picofarads (pF). The first two digits
represent significant figures and the
third digit specifies the number of
zeros to follow; i.e. 101 indicates 100
pF. For values below 10 pF, R = decimal point; i.e. 1R5 indicates 1.5 pF.
ET Series Glass Capacitors
Elevated Temperatures
RATINGS & PART NUMBER REFERENCE (Standard Values)
ET
Part No.
ETR
Part No.
Cap
(pF)
Tolerances
Available
Voltage
DC
Working
C
C, D
C, D
C, D
C, D
C, D
C, D
C, D
C, D
C, D
C, K
C, J, K
C, J, K
C, J, K
C, J, K
C, J, K
C, J, K
C, J, K
C, J, K, M
C, J, K, M
C, J, K, M
C, G, J, K, M
C, G, J, K, M
C, G, J, K, M
C, G, J, K, M
C, G, J, K, M
C, G, J, K, M
C, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
ET
Part No.
ETR
Part No.
ET10, ETR10
ET10E0R5 *
ET10E1R0
ET10E1R5
ET10E2R2
ET10E2R7
ET10E3R0
ET10E3R3
ET10E3R6
ET10E3R9
ET10E4R3
ET10E4R7
ET10E5R1
ET10E5R6
ET10E6R2
ET10E6R8
ET10E7R5
ET10E8R2
ET10E9R1
ET10E100
ET10E110
ET10E120
ET10E130
ET10E150
ET10E160
ET10E180
ET10E200
ET10E220
ET10E240
ET10E270
ET10E300
ET10E330
ET10E360
ET10E390
ET10E430
ET10E470
ET10E510
ET10E560
ET10E620
ET10E680
ET10E750
ETR10E0R5 **
ETR10E1R0
ETR10E1R5
ETR10E2R2
ETR10E2R7
ETR10E3R0
ETR10E3R3
ETR10E3R6
ETR10E3R9
ETR10E4R3
ETR10E4R7
ETR10E5R1
ETR10E5R6
ETR10E6R2
ETR10E6R8
ETR10E7R5
ETR10E8R2
ETR10E9R1
ETR10E100
ETR10E110
ETR10E120
ETR10E130
ETR10E150
ETR10E160
ETR10E180
ETR10E200
ETR10E220
ETR10E240
ETR10E270
ETR10E300
ETR10E330
ETR10E360
ETR10E390
ETR10E430
ETR10E470
ETR10E510
ETR10E560
ETR10E620
ETR10E680
ETR10E750
Add letter for
tolerance code
above lines.
0.5
1.0
1.5
2.2
2.7
3.0
3.3
3.6
3.9
4.3
4.7
5.1
5.6
6.2
6.8
7.5
8.2
9.1
10
11
12
13
15
16
18
20
22
24
27
30
33
36
39
43
47
51
56
62
68
75
Tolerances
Available
Voltage
DC
Working
ET10, ETR10 (cont’d)
ET10E820
ET10E910
ET10E101
ET10E111
ET10E121
ET10E131
ET10E151
ET10E161
ET10E181
ET10E201
ET10E221
ET10E241
ET10E271
ET10E301
ETR10E820
ETR10E910
ETR10E101
ETR10E111
ETR10E121
ETR10E131
ETR10E151
ETR10E161
ETR10E181
ETR10E201
ETR10E221
ETR10E241
ETR10E271
ETR10E301
82
91
100
110
120
130
150
160
180
200
220
240
270
300
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
50
50
50
50
50
50
50
50
50
50
50
50
50
50
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
ET15, ETR15
ET15E221
ET15E241
ET15E271
ET15E301
ET15E331
ET15E361
ET15E391
ET15E431
ET15E471
ET15E511
ET15E561
ET15E621
ET15E681
ET15E751
ET15E821
ET15E911
ET15E102
ET15E112
ET15E122
ETR15E221
ETR15E241
ETR15E271
ETR15E301
ETR15E331
ETR15E361
ETR15E391
ETR15E431
ETR15E471
ETR15E511
ETR15E561
ETR15E621
ETR15E681
ETR15E751
ETR15E821
ETR15E911
ETR15E102
ETR15E112
ETR15E122
220
240
270
300
330
360
390
430
470
510
560
620
680
750
820
910
1000
1100
1200
Add letter for
tolerance code
above lines.
These capacitors include a “burn in”, see page 58
High Voltage Stablization Screening.
These capacitors include a “burn in”, see page 58
High Voltage Stablization Screening.
Dissipation
Factor vs.
Temperature
% Capacitance
+4
Change vs.
Temperature
Axial
Axial
.01
+2
⌬ C in %
1 kHz Dissipation Factor
Cap
(pF)
0
-2
.001
-4
.0001
50
100
150
200
Temperature – ºC
250
0
25
50
75
100
125
150
175
200
Temperature – ºC
www.avx.com | 59
ET Series Glass Capacitors
Raidial Lead Elevated Temperatures
INTRODUCTION
ET06
AVX ET-Series radial leaded glass capacitors are available in
a broad range of tolerances and values in three case sizes.
The fused monolithic capacitive element is housed in a
miniature rectangular molded case for high packaging efficiency in circuit board applications. The gold-plated Dumet
leads can be soldered or welded.
ET07
ET06E
101J
AVX
ET08
ET07E
621J
ET08E
202J
AVX
AVX
L
T
PERFORMANCE CHARACTERISTICS
W
31.75
(1.250)
Min.
1.27 ±0.51
(.050 ±.020)
S
Leads on centerline
within ±0.51 (±.020)
DIMENSIONS:
millimeters (inches)
Case
Size
L
±0.13
(±0.005)
W
±0.25
(±0.010)
ET06
ET07
ET08
7.62 (0.300)
7.62 (0.300)
12.7 (0.500)
5.08 (0.200)
7.62 (0.300)
7.62 (0.300)
T
±0.13
(±0.005)
S
+0.51
(±0.020)
Weight
(grams)
2.92 (0.115)
2.92 (0.115)
2.92 (0.115)
5.08 (0.200)
5.08 (0.200)
10.16 (0.400)
.3 - .4
.4 - .5
.7 - .8
Note: All leads are 24 AWG, 0.51± 0.05 (0.020±0.002) diameter.
Leads are solderable and welded gold-plated Dumet.
MARKING
ET 06E
561J
1502
AVX
ET
ETR
06
E
561
J
1502
AVX
Tolerance: The ordering information table on the opposite
page gives the available tolerances and values. An explanation
of the part marking code is also provided.
Temperature Coefficient: Capacitance exhibits retraceability to within 10 ppm/°C over the temperature range -75°C to
200°C. See graph on following page.
Voltage Coefficient: Zero
Losses: Over the specified temperature range, losses are
very low. At 200°C, 1kHz, the dissipation factor is 1% or less.
Life: Delta C is less than 2% after 1000 hours at rated voltage, 200°C.
Insulation Resistance: 100,000 megohms or greater at
25°C; 100 megohms or greater at 200°C. More than 10
megohms after 1000 hour life-test.
Voltage/Temperature Rating: All ET-Series capacitors are
rated at 50 VDC over the operating temperature range of
-75°C to 200°C. Derating is not required.
High Voltage Stabilization Screening: A special version of
ET-Series radial leaded capacitors – designated ETR – is
available. These capacitors have been “burned in” at room
temperature for 50 hours at 1500 VDC.
Short Time Overtemperature Exposure: After exposure
to 250°C for one hour, ET-Series capacitors have continued
to perform to specification.
Additional performance details are given in the AVX
“Performance Characteristics of Multilayer Glass Dielectric
Capacitors” technical paper.
= AVX Corporation
= Glass Capacitor
= Glass Capacitor with “burn in”
= Case Size
= Operating Temperature Range
= Capacitance, Coded in pF
= Tolerance
= Date Code
HOW TO ORDER
ET
06
E
Style
Glass Capacitor
Case Size
06
07
08
Operating
Temperature Range
-75°C to +200°C
60 | www.avx.com
561
J
Capacitance Code
Capacitance Tolerance
Capacitance Code is expressed
in picofarads (pF). The first two
digits represent significant figures
and the third digit specifies the
number of zeros to follow; i.e.
561 indicates 560 pF. For values
below 10 pF, R = decimal point;
i.e. 1R5 indicates 1.5 pF.
C
D
F
G
J
K
M
=
=
=
=
=
=
=
±.25 pF
±.50 pF
±1%
±2%
±5%
±10%
±20%
ET Series Glass Capacitors
Raidial Lead Elevated Temperatures
RATINGS & PART NUMBER REFERENCE (Standard Values*)
ET
Part No.
ETR
Part No.
Cap
(pF)
ET06E8R2
ET06E9R1
ET06E100
ET06E110
ET06E120
ET06E130
ET06E150
ET06E160
ET06E180
ET06E200
ET06E220
ET06E240
ET06E270
ET06E300
ET06E330
ET06E360
ET06E390
ET06E430
ET06E470
ET06E510
ET06E560
ET06E620
ET06E680
ET06E750
ET06E820
ET06E910
ETR06E8R2
ETR06E9R1
ETR06E100
ETR06E110
ETR06E120
ETR06E130
ETR06E150
ETR06E160
ETR06E180
ETR06E200
ETR06E220
ETR06E240
ETR06E270
ETR06E300
ETR06E330
ETR06E360
ETR06E390
ETR06E430
ETR06E470
ETR06E510
ETR06E560
ETR06E620
ETR06E680
ETR06E750
ETR06E820
ETR06E910
Tolerances
Available
Voltage
DC
Working
ET
Part No.
ETR
Part No.
C, J, K
C, J, K
C, J, K, M
C, J, K, M
C, J, K, M
C, G, J, K, M
C, G, J, K, M
C, G, J, K, M
C, G, J, K, M
C, G, J, K, M
C, G, J, K, M
C, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
ET08E112 *
ET08E122
ET08E132
ET08E152
ET08E162
ET08E182
ET08E202
ET08E222
ET08E242
Cap
(pF)
ET06, ETR06
Add letter for
tolerance code
above lines.
8.2
9.1
10
11
12
13
15
16
18
20
22
24
27
30
33
36
39
43
47
51
56
62
68
75
82
91
DC
Working
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
50
50
50
50
50
50
50
50
50
ET08, ETR08
ETR08E112 **
ETR08E122
ETR08E132
ETR08E152
ETR08E162
ETR08E182
ETR08E202
ETR08E222
ETR08E242
Add letter for
tolerance code
above lines.
1100
1200
1300
1500
1600
1800
2000
2200
2400
These capacitors include a “burn in”, see page 60
High Voltage Stablization Screening.
*Other values may be available - contact AVX
These capacitors include a “burn in”, see page 60
High Voltage Stablization Screening.
Dissipation
Factor vs.
Temperature
% Capacitance
+4
Change vs.
Temperature
Radial
Radial
.01
+2
⌬ C in %
1 kHz Dissipation Factor
Tolerances
Available
Voltage
0
-2
.001
-4
.0001
50
100
150
200
Temperature – ºC
250
0
25
50
75
100
125
150
175
200
Temperature – ºC
www.avx.com | 61
RF/MICROWAVE
MLCCs
AVX offers RF/Microwave
capacitors suitable for high
temperature applications with
operating frequency range well
beyond 1GHz.
Solutions include:
• AQ Series
Porcelain and ceramic
dielectric MLCCs best suited
for applications from 10 MHz
to 4.2GHz. Components are
specified up to 175ºC operating
temperature.
• SQ Series
RF/microwave capacitors with
ultra low ESR suitable for RF
power amplifier applications.
Components are specified up
to 175ºC operating temperature.
A KYOCERA GROUP COMPANY
RF/Microwave MLCCs
AQ Series
These porcelain and ceramic dielectric multilayer capacitor
(MLC) chips are best suited for RF/ Microwave applications
typically ranging from 10 MHz to 4.2 GHz. Characteristic is a
fine grained, high density, high purity dielectric material impervious to moisture with heavy internal palladium electrodes.
These characteristics lend well to applications requiring:
1) high current carrying capabilities;
2) high quality factors;
3) very low equivalent series resistance;
4) very high series resonance;
5) excellent stability under stresses of changing voltage, frequency, time and temperature.
CHECK FOR UP-TO-DATE DATASHEET AT
http://www.avx.com/docs/catalogs/aq.pdf
MECHANICAL DIMENSIONS:
L
W
A 1J
10
T
Case
Length (L)
Width (W)
Thickness (T)
Band Width (bw)
AQ11
.055±.015
(1.40±.381)
.055 + .015 - .010
(1.40+ .381 - .254)
.110±.020
(2.79±.508)
.110 + .020 - .010
(2.79 +.889 -.254)
.055±.015
(1.40±.381)
.055±.015
(1.40±.381)
.110±.020
(2.79±.508)
.110±.010
(2.79±.508)
.020/.057
(.508/1.45)
.020/.057
(.508/1.45)
.030/.102
(.762/2.59)
.030/.102
(.762/2.59)
.010 + .010 -.005
(.254 +.254 -.127)
.010 + .010 -.005
(.254 +.254 -.127)
.015±.010
(.381±.254)
.015±.010
(.381±.254)
AQ12
AQ13
bw
inches (millimeters)
AQ14
HOW TO ORDER
AQ
11
E
M
AVX Style
AQ11
AQ12
AQ13
AQ14
Case
Size
(See
chart)
Voltage
Code
5 = 50V
1 = 100V
E = 150V
2 = 200V
9 = 300V
7 = 500V
Temperature
Coefficient
Code
M = +90±20ppm/°C
(AQ11/12/13/14)
A = 0±30ppm/°C
(AQ11/12/13/14)
C = 15%
(“J” Termination only)
(AQ12/14)
100
J
Capacitance
Capacitance
Tolerance
EIA Capacitance
Code
Code in pF.
B = ±.1 pF
First two digits =
C = ±.25 pF
significant figures or “R”
D = ±.5 pF
for decimal place.
F = ±1%
Third digit =
G = ±2%
number of zeros or after
J = ±5%
“R” significant figures.
K = ±10%
M = ±20%
N = ±30%
A
Failure Rate
Code
A = Not
Applicable
PACKAGING
Standard Packaging = Waffle Pack (maximum quantity is 80)
TAPE & REEL: All tape and reel specifications are in compliance with EIA RS481
(equivalent to IEC 286 part 3).
Sizes SQCA through SQCB, CDR11/12 through 13/14.
T
1A
Termination Style Packaging Code
Code
3A = 13" Reel
ME = 7" Reel
1 = Pd/Ag
(AQ11/13 only) RE = 13" Reel
WE = Waffle Pack
7 = Ag/Ni/Au
(AQ11/13 only)
J = Nickel Barrier
Sn/Pb (60/40)
(AQ12/14 only)
T = 100% Tin
(AQ12/14 only)
Not RoHS Compliant
LEAD-FREE COMPATIBLE
COMPONENT
For RoHS compliant products,
please select correct termination style.
—8mm carrier
—7" reel: ≤0.040" thickness = 2000 pcs
≤0.075" thickness = 2000 pcs
—13" reel: ≤0.075" thickness = 10,000 pcs
www.avx.com | 63
RF/Microwave MLCCs
AQ Series
ELECTRICAL SPECIFICATIONS
AQ11, AQ12, AQ13, AQ14
M&A
Temperature Coefficient (TCC)
Capacitance Range
Operating Temperature
Quality Factor (Q) M Dielectric A & B Case
A Dielectric B Case
A Dielectric A Case
Insulation Resistance (IR)
Working Voltage (WVDC)
Dielectric Withstanding Voltage (DWV)
Aging Effects
Piezoelectric Effects
Capacitance Drift
(M) +90 ± 20 PPM/ºC ( -55ºC to +125ºC)
(M) +90 ± 30 PPM/ºC ( +125ºC to +175ºC)
(A)
0 ± 30 PPM/ºC
(M) 0.1 pF to 1000 pF
(A) 0.1 pF to 5100 pF
0.1 pF to 330 pF: from -55ºC to +175ºC
360 pF to 5100 pF: from -55ºC to +125ºC
Greater than 10,000 at 1 MHz
Greater than 10,000 at 1 MHz
Greater than 2,000 at 1 MHz
Greater than 2,000 at 1 KHz
Greater than 10,000 at 1 MHz
Greater than 2,000 at 1 MHz
0.1 pF to 470 pF
106 Megohms min. @ 25ºC at rated WVDC
105 Megohms min. @ 125ºC at rated WVDC
510 pF to 5100 pF
105 Megohms min. @ 25ºC at rated WVDC
104 Megohms min. @ 125ºC at rated WVDC
See Capacitance Values table
250% of rated WVDC for 5 secs
(for 500V rated 150% of rated voltage)
None
None
± (0.02% or 0.02 pF), whichever is greater
C
±15% (-55ºC to 125ºC)
0.001μF to 0.1μF
-55°C to +125°C
2.5% @ 1kHz
0.1 - 200 pF
220 - 1000 pF
1100 - 5100 pF
0.1 - 100 pF
110 - 1000 pF
104 Megohms min. @ 25ºC at rated WVDC
103 Megohms min. @ 125ºC at rated WVDC
See Capacitance Values table
250% of rated WVDC for 5 secs
<3% per decade hour
None
Not Applicable
ENVIRONMENTAL CHARACTERISTICS
AVX SQLB will meet and exceed the requirements of EIA-198, MIL-PRF-55681 and MIL-PRF-123
Themal Shock
Moisture Resistance
Low Voltage Humidity
Life Test
Shock
Vibration
Immersion
Salt Spray
Solderability
Terminal Strength
Temperature Cycling
Barometric Pressure
Resistance to Solder Heat
64 | www.avx.com
Mil-STD-202, Method 107, Condition A
Mil-STD-202, Method 106
Mil-STD-202, Method 103, condition A, with 1.5 VDC
applied while subjected to an environment of 85ºC with
85% relative humidity for 240 hours
Mil-STD-202, Method 108, for 2000 hours at 125ºC
Mil-STD-202, Method 213, Condition J
Mil-STD-202, Method 204, Condition B
Mil-STD-202, Method 104, Condition B
Mil-STD-202, Method 101, Condition B
Mil-STD-202, Method 208
Mil-STD-202, Method 211
Mil-STD-202, Method 102, Condition C
Mil-STD-202, Method 105, Condition B
Mil-STD-202, Method 210, Condition C
RF/Microwave MLCCs
AQ Series
TABLE I: TC: M (+90±20PPM/°C)
CASE SIZE 11, 12, 13 & 14
DIMENSIONS: inches (millimeters)
Case
Length
Width
Thickness
Band Width
Avail. Term.
11
12
13
14
.055±.015 (1.40±.381)
.055±.025 (1.40±.635)
.110±.020 (2.79±.508)
.110 +0.035 -0.020 (2.79 +.889 -.508)
.055±.015 (1.40±.381)
.055±.015 (1.40±.381)
.110±.020 (2.79±.508)
.110±.020 (2.79±.508)
.020/.057 (.508/1.45)
.020/.057 (.508/1.45)
.030/.102 (.762/2.59)
.030/.102 (.762/2.59)
.010 +.010 -.005 (.254 +.254 -.127)
.010 +.010 -.005 (.254 +.254 -.127)
.015±.010 (.381±.254)
.015±.010 (.381±.254)
1& 7
J
1& 7
J
Case: AQ11, AQ12
Cap. pF
0.1
0.2
0.3
0.4
0.5
0.6
0.7
0.8
0.9
1.0
1.1
1.2
1.3
1.4
1.5
1.6
1.7
1.8
1.9
2.0
2.2
2.4
2.7
3.0
3.3
3.6
3.9
4.3
4.7
5.1
5.6
6.2
6.8
7.5
8.2
9.1
10
11
12
13
15
16
18
20
22
24
27
30
33
36
39
43
47
51
56
62
68
75
82
91
100
Cap. Tol.
B
B
B,C
B,C
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, J, K, M
B, C, J, K, M
B, C, J, K, M
B, C, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
WVDC
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
Case: AQ13, AQ14
Cap. pF
0.1
0.2
0.3
0.4
0.5
0.6
0.7
0.8
0.9
1.0
1.1
1.2
1.3
1.4
1.5
1.6
1.7
1.8
1.9
2.0
2.2
2.4
2.7
3.0
3.3
3.6
3.9
4.3
4.7
5.1
5.6
6.2
6.8
7.5
8.2
9.1
10
11
12
13
15
16
18
20
22
24
27
30
33
36
39
43
47
51
56
62
68
75
82
91
Cap. Tol.
B
B
B,C
B,C
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, J, K, M
B, C, J, K, M
B, C, J, K, M
B, C, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
WVDC
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
Cap. pF
100
110
120
130
150
160
180
200
220
240
270
300
330
360
390
430
470
510
560
620
680
750
820
910
1000
Cap. Tol.
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
WVDC
500
300
300
300
300
300
300
300
200
200
200
200
200
200
200
200
200
150
150
150
150
150
150
150
150
www.avx.com | 65
RF/Microwave MLCCs
AQ Series
TABLE II: TC: A (0±30PPM/°C)
CASE SIZE 11, 12, 13 & 14
DIMENSIONS: inches (millimeters)
Case
Length
Width
Thickness
Band Width
Avail. Term.
11
12
13
14
.055±.015 (1.40±.381)
.055±.025 (1.40±.635)
.110±.020 (2.79±.508)
.110 +0.035 -0.020 (2.79 +.889 -.508)
.055±.015 (1.40±.381)
.055±.015 (1.40±.381)
.110±.020 (2.79±.508)
.110±.020 (2.79±.508)
.020/.057 (.508/1.45)
.020/.057 (.508/1.45)
.030/.102 (.762/2.59)
.030/.102 (.762/2.59)
.010 +.010 -.005 (.254 +.254 -.127)
.010 +.010 -.005 (.254 +.254 -.127)
.015±.010 (.381±.254)
.015±.010 (.381±.254)
1& 7
J
1& 7
J
Case: AQ13, AQ14
Case: AQ11, AQ12
Cap. pF
Cap. Tol.
WVDC
0.1
0.2
0.3
0.4
0.5
0.6
0.7
0.8
0.9
1.0
1.1
1.2
1.3
1.4
1.5
1.6
1.7
1.8
1.9
2.0
2.2
2.4
2.7
3.0
3.3
3.6
3.9
4.3
4.7
5.1
5.6
6.2
6.8
7.5
8.2
9.1
10
11
12
13
15
16
18
20
22
B
B
B,C
B,C
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, J, K, M
B, C, J, K, M
B, C, J, K, M
B, C, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
Cap. pF
24
27
30
33
36
39
43
47
51
56
62
68
75
82
91
100
110
120
130
150
160
180
200
220
240
270
300
330
360
390
430
470
510
560
620
680
750
820
910
1000
Cap. Tol.
WVDC
Cap. pF
Cap. Tol.
WVDC
Cap. pF
Cap. Tol.
WVDC
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
0.1
0.2
0.3
0.4
0.5
0.6
0.7
0.8
0.9
1.0
1.1
1.2
1.3
1.4
1.5
1.6
1.7
1.8
1.9
2.0
2.2
2.4
2.7
3.0
3.3
3.6
3.9
4.3
4.7
5.1
5.6
6.2
6.8
7.5
8.2
9.1
10
11
12
13
15
16
18
20
22
24
27
30
33
36
39
43
47
B
B
B,C
B,C
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, J, K, M
B, C, J, K, M
B, C, J, K, M
B, C, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
51
56
62
68
75
82
91
100
110
120
130
150
160
180
200
220
240
270
300
330
360
390
430
470
510
560
620
680
750
820
910
1000
1100
1200
1300
1500
1600
1800
2000
2200
2400
2700
3000
3300
3600
3900
4300
4700
5000
5100
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
500
500
500
500
500
500
500
500
300
300
300
300
300
300
300
200
200
200
200
200
200
200
200
200
150
150
150
150
150
150
150
150
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
TABLE III: TC: C (±15%)
CASE SIZE 12 & 14
Case: AQ12
Cap. pF
1000
1200
1500
1800
2000
Cap. Tol.
K, M, N
K, M, N
K, M, N
K, M, N
K, M, N
WVDC
50
50
50
50
50
Cap. pF
2200
2700
3300
3900
4700
66 | www.avx.com
Cap. Tol.
K, M, N
K, M, N
K, M, N
K, M, N
K, M, N
WVDC
50
50
50
50
50
Case: AQ14
Cap. pF
5100
5600
6800
8200
10000
Cap. Tol.
K, M, N
K, M, N
K, M, N
K, M, N
K, M, N
WVDC
50
50
50
50
50
Cap. pF
5000
6800
8200
10000
12000
Cap. Tol.
K, M, N
K, M, N
K, M, N
K, M, N
K, M, N
WVDC
50
50
50
50
50
Cap. pF
15000
18000
27000
33000
39000
Cap. Tol.
K, M, N
K, M, N
K, M, N
K, M, N
K, M, N
WVDC
50
50
50
50
50
Cap. pF
47000
68000
82000
100000
Cap. Tol.
K, M, N
K, M, N
K, M, N
K, M, N
WVDC
50
50
50
50
RF/Microwave MLCCs
SQCB Ultra Low ESR MLCC
SQCB (1111) are AVX’s Ultra Low ESR microwave capacitors. Suitable
for RF Power Amplifiers, they come in non-mag termination for MRI
applications. They offer very High Q & resonant frequency and power
handling capability.
FEATURES:
APPLICATIONS:
• Low ESR
• RF Power Amplifiers
• High Q
• Low Noise Amplifiers
• High Self Resonance
• Filter Networks
• Capacitance Range
0.1 pF to 5100 pF
• MRI Systems
• 175ºC Capability SQCB
CHECK FOR UP-TO-DATE CATALOG AT
http://avx.com/docs/Catalogs/sqca-sqcb.pdf
HOW TO ORDER
SQ
CB
7
AVX
Style
SQ
Case Size
CB = *
Voltage
Code
5 = 50V
E = 150V
2 = 200V
V = 250V
9 = 300V
7 = 500V
*See
Mechanical
dimensions
below
M
100
J
Capacitance
Temperature
Capacitance
Tolerance
Coefficient
EIA Capacitance
Code
Code
Code in pF.
B = ±.1 pF
M = +90±20ppm/°C
First two digits =
C = ±.25 pF
significant figures or “R”
A = 0±30ppm/°C
D = ±.5 pF
for
decimal
place.
C = 15%
F = ±1%
(“J” Termination only)
Third digit =
G = ±2%
number of zeros or after J = ±5%
“R” significant figures.
K = ±10%
M = ±20%
N = ±30%
A
T
1A
Failure Rate
Code
A = Not
Applicable
Termination
Style Code
**1 = Pd/Ag
**7 = Ag/Ni/Au
J = Nickel Barrier
Tin/Lead
(60/40)
**T = 100% Tin
Packaging Code
1A = 7" Reel Unmarked
6A = Waffle Pack Unmarked
ME = 7" Reel Marked
WE = Waffle Pack Unmarked
*Vertical T&R available
*500 piece reels available
**RoHS compliant
Not RoHS Compliant
LEAD-FREE COMPATIBLE
COMPONENT
For RoHS compliant products,
please select correct termination style.
W
L
MECHANICAL DIMENSIONS:
T
inches (millimeters)
Case
Length (L)
Width (W)
Thickness (T)
Band Width (bw)
SQCB*
.110 + .020 - .010
(2.79 +.508 -.254)
.110±.010
(2.79±.254)
.030/.102
(.762/2.59)
.015±.010
(.381±.254)
bw
TAPE & REEL: All tape and reel specifications are in compliance with EIA RS481 (equivalent to IEC 286 part 3).
—8mm carrier
—7" reel: SQCB = 1000 pcs
WAFFLE PACK
SQCB 100 pcs
www.avx.com | 67
RF/Microwave MLCCs
SQCB Ultra Low ESR MLCC
ELECTRICAL SPECIFICATIONS
M&A
Temperature Coefficient (TCC)
Capacitance Range
Operating Temperature
Quality Factor (Q) M Dielectric B Case
A Dielectric B Case
Insulation Resistance (IR)
Working Voltage (WVDC)
Dielectric Withstanding Voltage (DWV)
Aging Effects
Piezoelectric Effects
Capacitance Drift
(M) +90 ± 20 PPM/ºC ( -55ºC to +125ºC)
(M) +90 ± 30 PPM/ºC ( +125ºC to +175ºC)*
(A)
0 ± 30 PPM/ºC
(M) 0.1 pF to 1000 pF
(A) 0.1 pF to 5100 pF
0.1 pF to 330 pF: from -55ºC to +175ºC*
360 pF to 5100 pF: from -55ºC to +125ºC
Greater than 10,000 at 1 MHz
Greater than 10,000 at 1 MHz
Greater than 2,000 at 1 MHz
Greater than 2,000 at 1 KHz
0.2 pF to 470 pF
106 Megohms min. @ 25ºC at rated WVDC
105 Megohms min. @ 125ºC at rated WVDC
510 pF to 5100 pF
105 Megohms min. @ 25ºC at rated WVDC
104 Megohms min. @ 125ºC at rated WVDC
See Capacitance Values table
250% of rated WVDC for 5 secs
(for 500V rated 150% of rated voltage)
None
None
± (0.02% or 0.02 pF), whichever is greater
C
±15% (-55ºC to 125ºC)
0.001μF to 0.1μF
-55°C to +125°C
2.5% @ 1kHz
0.1 - 200 pF
220 - 1000 pF
1100 - 5100 pF
104 Megohms min. @ 25ºC at rated WVDC
103 Megohms min. @ 125ºC at rated WVDC
See Capacitance Values table
250% of rated WVDC for 5 secs
<3% per decade hour
None
Not Applicable
* 175 SQCB & SQLB only
ENVIRONMENTAL CHARACTERISTICS
AVX SQ will meet and exceed the requirements of EIA-198, MIL-PRF-55681 and MIL-PRF-123
Themal Shock
Moisture Resistance
Low Voltage Humidity
Life Test
Shock
Vibration
Immersion
Salt Spray
Solderability
Terminal Strength
Temperature Cycling
Barometric Pressure
Resistance to Solder Heat
68 | www.avx.com
Mil-STD-202, Method 107, Condition A
Mil-STD-202, Method 106
Mil-STD-202, Method 103, condition A, with 1.5 VDC
applied while subjected to an environment of 85ºC with
85% relative humidity for 240 hours
Mil-STD-202, Method 108, for 2000 hours at 125ºC
Mil-STD-202, Method 213, Condition J
Mil-STD-202, Method 204, Condition B
Mil-STD-202, Method 104, Condition B
Mil-STD-202, Method 101, Condition B
Mil-STD-202, Method 208
Mil-STD-202, Method 211
Mil-STD-202, Method 102, Condition C
Mil-STD-202, Method 105, Condition B
Mil-STD-202, Method 210, Condition C
RF/Microwave MLCCs
SQCB Ultra Low ESR MLCC
AVAILABLE CAPACITANCE/SIZE/WVDC/T.C.
Case Size B
TABLE IV: TC: M (+90±20PPM/°C)
Cap. pF
0.1
0.2
0.3
0.4
0.5
0.6
0.7
0.8
0.9
1.0
1.1
1.2
1.3
1.4
1.5
1.6
1.7
1.8
1.9
2.0
2.2
2.4
Cap. Tol.
B
B
B,C
B,C
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
WVDC
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
Cap. pF
2.7
3.0
3.3
3.6
3.9
4.3
4.7
5.1
5.6
6.2
6.8
7.5
8.2
9.1
10
11
12
13
15
16
18
Cap. Tol.
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, J, K
B, C, J, K
B, C, J, K
B, C, J, K
F, G, J, K
F, G, J, K
F, G, J, K
F, G, J, K
F, G, J, K
F, G, J, K
F, G, J, K
WVDC
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
Cap. pF
20
22
24
27
30
33
36
39
43
47
51
56
62
68
75
82
91
100
110
120
130
Cap. Tol.
F, G, J, K
F, G, J, K
F, G, J, K
F, G, J, K
F, G, J, K
F, G, J, K
F, G, J, K
F, G, J, K
F, G, J, K
F, G, J, K
F, G, J, K
F, G, J, K
F, G, J, K
F, G, J, K
F, G, J, K
F, G, J, K
F, G, J, K
F, G, J, K
F, G, J, K
F, G, J, K
F, G, J, K
WVDC
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
300
300
300
Cap. pF
150
160
180
200
220
240
270
300
330
360
390
430
470
510
560
620
680
750
820
910
1000
Cap. Tol.
F, G, J, K
F, G, J, K
F, G, J, K
F, G, J, K
F, G, J, K
F, G, J, K
F, G, J, K
F, G, J, K
F, G, J, K
F, G, J, K
F, G, J, K
F, G, J, K
F, G, J, K
F, G, J, K
F, G, J, K
F, G, J, K
F, G, J, K
F, G, J, K
F, G, J, K
F, G, J, K
F, G, J, K
WVDC
300
300
300
300
200
200
200
200
200
200
200
200
200
150
150
150
150
150
150
150
150
WVDC
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
Cap. pF
47
51
56
62
68
75
82
91
100
110
120
130
150
160
180
200
220
240
270
300
330
360
390
430
470
510
Cap. Tol.
F, G, J, K
F, G, J, K
F, G, J, K
F, G, J, K
F, G, J, K
F, G, J, K
F, G, J, K
F, G, J, K
F, G, J, K
F, G, J, K
F, G, J, K
F, G, J, K
F, G, J, K
F, G, J, K
F, G, J, K
F, G, J, K
F, G, J, K
F, G, J, K
F, G, J, K
F, G, J, K
F, G, J, K
F, G, J, K
F, G, J, K
F, G, J, K
F, G, J, K
F, G, J, K
WVDC
500
500
500
500
500
500
500
500
500
300
300
300
300
300
300
300
200
200
200
200
200
200
200
200
200
150
Cap. pF
560
620
680
750
820
910
1000
1100
1200
1300
1500
1600
1800
2000
2200
2400
2700
3000
3300
3600
3900
4300
4700
5000
5100
Cap. Tol.
F, G, J, K
F, G, J, K
F, G, J, K
F, G, J, K
F, G, J, K
F, G, J, K
F, G, J, K
F, G, J, K
F, G, J, K
F, G, J, K
F, G, J, K
F, G, J, K
F, G, J, K
F, G, J, K
F, G, J, K
F, G, J, K
F, G, J, K
F, G, J, K
F, G, J, K
F, G, J, K
F, G, J, K
F, G, J, K
F, G, J, K
F, G, J, K
F, G, J, K
WVDC
150
150
150
150
150
150
150
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
TABLE V: TC: A (0±30PPM/°C)
Cap. pF
0.1
0.2
0.3
0.4
0.5
0.6
0.7
0.8
0.9
1.0
1.1
1.2
1.3
1.4
1.5
1.6
1.7
1.8
1.9
2.0
2.2
2.4
2.7
3.0
3.3
3.6
Cap. Tol.
B
B
B,C
B,C
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
WVDC
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
Cap. pF
3.9
4.3
4.7
5.1
5.6
6.2
6.8
7.5
8.2
9.1
10
11
12
13
15
16
18
20
22
24
27
30
33
36
39
43
Cap. Tol.
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, J, K
B, C, J, K
B, C, J, K
B, C, J, K
F, G, J, K
F, G, J, K
F, G, J, K
F, G, J, K
F, G, J, K
F, G, J, K
F, G, J, K
F, G, J, K
F, G, J, K
F, G, J, K
F, G, J, K
F, G, J, K
F, G, J, K
F, G, J, K
F, G, J, K
F, G, J, K
TABLE VI: TC: C (±15%)
Cap. pF
5000
6800
8200
10000
12000
Cap. Tol.
K, M, N
K, M, N
K, M, N
K, M, N
K, M, N
WVDC
50
50
50
50
50
Cap. pF
15000
18000
27000
33000
39000
Cap. Tol.
K, M, N
K, M, N
K, M, N
K, M, N
K, M, N
WVDC
50
50
50
50
50
Cap. pF
47000
68000
82000
100000
Cap. Tol.
K, M, N
K, M, N
K, M, N
K, M, N
WVDC
50
50
50
50
www.avx.com | 69
RF/Microwave MLCCs
SQCB Ultra Low ESR MLCC
Typical ESR SQCB
1
4.7pF
10pF
22pF
100pF
1000pF
ESR (ohms)
0.1
0.01
0.001
10
100
1000
Frequency (Mhz)
SQCB Max Current
Max Current (amps)
100
4.7pF
10pF
22pF
100pF
1000pF
10
1
0.1
10
100
1000
10000
Frequency (Mhz)
Series Resonant Frequency
10000
SRF (Mhz)
SQCB
1000
100
1
10
100
Capacitance (pF)
1000
B
DESIGN KITS
C
A
D
MOUNTING PAD DIMENSIONS:
inches (millimeters)
A min
0.131
(3.327)
B min
0.051
(1.295)
70 | www.avx.com
C min
0.074
(1.880)
D min
0.177
(4.496)
PN
Diel
Term
KITSQ800LF
KITSQ1100LF
KITSQ900LF
KITSQ1200LF
KITSQ1000LF
KITSQ1300LF
P90
C0G
P90
C0G
P90
C0G
KITSQ1400LF
C0G
100% Tin
RoHS
100% Tin
RoHS
100% Tin
RoHS
100% Tin
RoHS
Range
Different
Values
#
per value
1 to 10pF
16
15
10 to 100pF
16
15
100 to 1000pF
16
15
1000 to 5100 pF
11
15
CIRCUIT
PROTECTION &
SIGNAL INTEGRITY
AVX multi-layer varistors (MLVs)
help to protect sensitive electronic
systems against electrostatic
discharge (ESD) and other
transients while reducing EMI/RFI.
High temperature circuit protection
solutions include:
• High Temperature
CANBUS MLV
Multi-Layer varistors designed and
manufactured for protecting high
frequency CANBUS
communications lines in high
temperature applications.
Products have been tested,
qualified, and specified to 150ºC.
• High Temperature
Low Leakage MLV
Multi-Layer varistors designed and
manufactured for high
temperature applications requiring
low leakage circuit protection
components. Products have been
tested, qualified, and specified to
150ºC.
• Radial Leaded
High Temperature MLV
High Temperature Multi-Layer
Varistors designed for protection
and EMI/RFI filtering of sensitive
circuits in high temperature
applications. These varistors have
been built for durability in harsh
environments. Products have
been tested, qualified, and
specified to 150ºC.
A KYOCERA GROUP COMPANY
High Temperature Automotive
150ºC Rated Varistors
AVX High Temperature Multi-Layer Varistors are designed for underhood applications. Products have been tested, qualified, and specified to 150ºC. The MLV
advantage is EMI/RFI attenuation in the off state. This allows designers the ability
to combine the circuit protection and EMI/RFI attenuation function into a single
highly reliable device.
FEATURES
APPLICATIONS
• Operating Temperature:
-55ºC to +150ºC
• AEC Q200 qualified
• ESD rating to 25kV contact
• EMI/RFI attenuation in off state
• Excellent current and energy handling
•
•
•
•
•
•
•
Under hood
Down Hole Drilling
High temperature applications
Communication Bus
Sensors
RF Circuits
Capacitance sensitive applications and more
CAN SERIES
HOW TO ORDER
CAN
AT
01
R
P
Type
Series
Case Size
Packaging
Termination
Controlled Area
Network Varistor
Automotive
High Temperature
01 = 0603
02 = 0405 2-Element
04 = 0612 4-Element
D = 7” (1000 pcs)
R = 7” (4,000 pcs)
T = 13” (10,000pcs)
P = Ni Barrier/
100% Sn (matte)
AVX Part Number
VW (DC)
VW (AC)
VB
IL
ET
IP
Cap
Case Size
Elements
CANAT01-CANAT02-CANAT04--
≤ 18
≤ 18
≤ 18
≤ 14
≤ 14
≤ 14
120
70
100
10
10
10
0.015
0.015
0.015
4
4
4
22
22
22
0603
0405
0612
1
2
4
VW(DC)
VW(AC)
VB
VC
DC Working Voltage [V]
AC Working Voltage [V]
Breakdown Votage [V @ 1mADC]
Clamping Votage [V @ IVC]
IL
ET
IP
Cap
Maximum leakage current at the working voltage [µA]
Transient Energy Rating [J, 10x1000µS]
Peak Current Rating [A, 8x20µS]
Capacitance [pF] @ 1KHz specified and 0.5VRMS
ANTENNAGUARD SERIES
HOW TO ORDER
VCAT
06
AG
18
120
Y
A
T
1
A
Type
Case Size
Varistor Series
AntennaGuard
Non-Std.
Cap Tolerance
N/A
04 = 0402
06 = 0603
Working
Voltage
Cap
High Temperature
Varistor
Termination
Finish
Reel
Size
Reel
Quantity
P = Ni Barrier/
100% Sn
1 = 7"
3 = 13"
A = 4000 or
10,000
18 = 18Vdc
AVX Part Number
VW (DC)
VW (AC)
IL
Cap
VCAT06AG18120YAT--
≤ 18
≤ 14
10
12
VW(DC)
VW(AC)
DC Working Voltage [V]
AC Working Voltage [V]
72 | www.avx.com
IL
Cap
Cap Tolerance Case Size
+4, -2pF
0603
Maximum leakage current at the working voltage [µA]
Capacitance [pF] @ 1KHz specified and 0.5VRMS
High Temperature Automotive
150ºC Rated Varistors
PHYSICAL DIMENSIONS
W
W
T
P
P
W
T
T
BW
BL
BW
L
BL
0603 Discrete Dimensions
L
W
T
1.60±0.15
0.80±0.15
0.90 MAX
(0.063±0.006) (0.032±0.006)
(0.035 MAX)
BW
N/A
BL
0.35±0.15
(0.014±0.006)
P
mm (inches)
W
T
BW
BL
P
1.00±0.15
1.37±0.15
0.66 MAX
0.36±0.10
0.20±0.10
0.64 REF
(0.014±0.004) (0.008±0.004)
0612 4 Elements Array Dimensions
(0.025 REF)
mm (inches)
L
W
T
BW
BL
P
1.60±0.20
3.20±0.20
1.22 MAX
0.41±0.10
0.18 +0.25
-0.08
0.76 REF
(0.048 MAX)
(0.016±0.004)
(0.008 -.003 )
(0.030 REF)
(0.063±0.008) (0.126±0.008)
L
N/A
L
(0.026 MAX)
BL
mm (inches)
0405 2 Elements Array Dimensions
(0.039±0.006) (0.054±0.006)
L
+.010
www.avx.com | 73
High Temperature Low Leakage Automotive Varistors
150ºC Rated Low Leakage Automotive Varistors
GENERAL DESCRIPTION
AVX High Temperature Low Leakage Multi-Layer Varistors are designed for underhood and high temperature applications where low leakage component is required
Parts are tested, qualified and specified to 150ºC.
The MLV advantage is EMI/RFI attenuation in the off state. This allows designers the
ability to to combine the circuit protection and EMI/RFI attenuation function into a
single highly reliable device.
GENERAL
CHARACTERISTICS
• Operating Temperature:
-55ºC to 150ºC
FEATURES
APPLICATIONS
• Rated at 150°C
• AEC Q200 qualified
• ESD rating to 25kV
(HBM ESD Level 6)
• EMI/RFI attenuation in
off state
• Very Low Leakage
• Under hood
• High temperature
applications
• Bus Interface Protection
• CAN Bus
• BCM, TCU
• Capacitance sensitive
applications
and more
COMMUNICATION BUS - HIGH TEMPERATURE LOW LEAKAGE VARISTOR
HOW TO ORDER
CAN
ATL
07
Type
Series
Case Size
Packaging
Termination
Controlled Area
Network Varistor
Automotive
High Temperature
Low Leakage
07 = 0603
D = 7” (1000 pcs)
R = 7” (4,000 pcs)
T = 13” (10,000pcs)
P = Ni Barrier/100% Sn
PN
VW(DC) VW(AC)
CANATL07
VW(DC)
VW(AC)
VB
VC
IVC
IL1
32
25
R
P
VB
VC
IVC
IL1
IL2
ET
IP
61±15%
120
1
1
<1
0.05
5
DC Working Voltage [V]
AC Working Voltage [V]
Breakdown Votage [V @ 1mADC, 25ºC]
Clamping Votage [V @ IIVC]
Test Current for VC [A, 8x20μs]
Maximum leakage current at the working voltage, 25ºC [μA]
74 | www.avx.com
IL2
ET
IP
Cap
VJump
PDISS
Typ Cap Cap Tol
10
±50%
Freq
VJump
PDiss max
M
27
0.003
Typical leakage current at 28Vdc, 25°C [μA]
Transient Energy Rating [J, 10x1000μS]
Peak Current Rating [A, 8x20μS]
Capacitance [pF] @ 1KHz specified and 0.5VRMS
Jump Start [V, 5 min]
Max Power Dissipation [W]
High Temperature Low Leakage Automotive Varistors
150ºC Rated Low Leakage Automotive Varistors
S21 CHARACTERISTICS
5
Insertion Loss (dB)
0
-5
-10
-15
-20
-25
-30
0.1
1
10
100
1000
10000
Frequency (MHz)
CANATL07
PHYSICAL DIMENSIONS AND RECOMMENDED PAD LAYOUT
0603 Discrete Dimensions
T
D
mm (inches)
L
W
T
BL
1.60±0.15
0.80±0.15
0.90 MAX
0.35±0.15
(0.063±0.006)
(0.032±0.006)
(0.035 MAX)
(0.014±0.006)
W
A
C
BL
L
B
0603 Soldering Pad
mm (inches)
A
B
C
D
0.89
(0.035)
0.76
2.54
0.76
(0.030)
(0.100)
(0.030)
www.avx.com | 75
Radial Leaded High Temperature Automotive
150ºC Rated Radial Leaded TransGuard®
GENERAL DESCRIPTION
AVX High Temperature Multi-Layer Varistors are designed for underhood
applications. Products have been tested, qualified, and specified to 150ºC. The
Radial Leaded TransGuard is built for durability in harsh environments. The MLV
advantage is EMI/RFI attenuation in the off state. This allows designers to combine
the circuit protection and EMI/RFI attenuation function into a single highly reliable
device.
GENERAL
CHARACTERISTICS
• Operating Temperatures:
-55ºC to +150ºC
• Working Voltage:
14-48Vdc
FEATURES
APPLICATIONS
•
•
•
•
•
•
•
•
•
•
•
Rated at 150ºC
AEC Q200 qualified
ESD rated to 25kV (HBM ESD Level 6)
EMI/RFI attenuation in off state
Excellent current and energy handling
Under hood
Down Hole Drilling
DC Motors
Relays
Inductive Loads
High Temperature/Harsh environment
and more
HOW TO ORDER
VR15
AT
18
A
650
Clamping
Voltage
AVX Style
Series
Voltage
Energy
VR15
VR20
AT = 150ºC
Automotive
14 = 14V
18 = 18V
26 = 26V
48 = 48V
A = 0.1J
D = 0.4J
S = 2.0J
580 = 60V
650 = 67V
101 = 100V
151 = 150V
R
TR2
Leads
Packaging
R = RoHS
Compliant
Blank = Bulk
TR1 = T&R Standard 1
TR2 = T&R Standard 2
ELECTRICAL CHARACTERISTICS
AVX Part Number
VR15AT14A580
VR15AT18A650
VR20AT26D101
VR20AT48S151
VW(DC)
VW(AC)
VB
VC
IVC
IL
VW DC
14.0
18.0
26.0
48.0
VW AC
10.0
13.0
18.0
34.0
VB
34.5±10%
41.0±10%
62.0±10%
100.0±10%
VC
60
67
100
150
IVC
1
1
1
1
IL
10
10
10
10
Et
ELD
IP
Cap
VJump
PDISS
DC Working Voltage [V]
AC Working Voltage [V]
Typical Breakdown Votage [V @ 1mADC]
Clamping Voltage [V @ IIV]
Test Current for VC
Maximum leakage current at the working voltage [μA]
ET
0.1
0.1
0.4
2.0
ELD
0.15
0.15
1.5
3.5
IP
30
30
100
250
W
mm (inches)
.060 (1.52)
Max.
AVX Style
VR15
1.0 (25.4)
Min.
.100 (2.54)±.030
76 | www.avx.com
VR20
Width
(W
4.32 Max.
(0.170)
5.59 Max
(0.220)
Height
(H)
3.81 Max.
(0.150)
5.08 Max
(0.200)
Thickness
(T)
2.54 Max.
(0.100)
3.175 Max
(0.125)
Freq
K
M
K
K
VJUMP
27.5
29
48
48
PDISS
0.002
0.002
0.008
0.040
Transient Energy Rating [J, 10x1000μS]
Load Dump Energy (x10) [J]
Peak Current Rating [A, 8x20μS]
Typical capacitance [pF] @ frequency specified and 0.5VRMS
Jump Start (V)
Power Dissipation (W)
PHYSICAL DIMENSIONS
H
Cap
120
90
225
275
Lead
Spacing
2.54
(0.100)
2.54
(0.100)
Lead
Diameter
0.508
(0.020)
0.508)
(0.020
Radial Leaded High Temperature Automotive
150ºC Rated Radial Leaded TransGuard®
TYPICAL PERFORMANCE CURVES
Typical
Voltage
Current
Characteristics
Typical
Voltage Current
Characteristics
180
160
Voltage (V)
VR20AT48S151
140
VR20AT26D101
120
VR15AT18A650
VR15AT14A580
100
80
60
40
20
0
1.E-09
1.E-06
1.E-03
1.E+00
1.E+03
Current (A)
AEC-Q200-002 ESD Characteristics
ESD Wave Absorption Characteristics
10%
2500
5%
2000
VOLTAGE (V)
% V b Change
No Suppression 8kV 150 pF 330 Ohm
0%
-5%
-10%
6
12
16
25
VR20AT48S151
VR20AT26D101
VR15AT18A650
1500
VR15AT14A580
1000
500
0
kV Pulse
0
20
40
60
80
TIME (nsec)
100
120
140
8 kV ESD Vc
(150pF/330ohm IEC Network)
TAPE & REEL PACKAGING OPTIONS
TR1
Tape & Reel Standard 1
0.630 (16.0)
Min.
TR2
Tape & Reel Standard 2
0.748 (19.0)
Min.
www.avx.com | 77
NTC THERMISTORS
AVX NTC thermistors are high quality
devices that can be used for
temperature compensation,
temperature control and high in-rush
current protection of sensitive
circuitry.
NTC Thermistor Solutions Include:
• NTC SMD Thermistors
NTC thermistors especially
developed for surface mounting
applications, available in 0603,
0805 and 1206 case sizes.
Products are specified to +150ºC.
• NTC Leaded Disc Thermistors
Leaded thermistors designed and
built for harsh environment
applications. Products are
specified to +150ºC
A KYOCERA GROUP COMPANY
NTC SMD Thermistors
With Ni Barrier Termination NB 12 - NB 20
Chip thermistors are a high quality and low cost device especially developed for surface
mounting applications. They are widely used for temperature compensation but can also
achieve temperature control of printed circuits.
A nickel barrier metallization provides outstanding qualities of solderability and enables this
chip to meet the requirements of the most severe soldering processes.
APPLICATIONS
•
•
•
•
•
•
•
LCD compensation
CD players
Heating systems
Air-conditioning systems
Compensation of pressure sensors
Temperature control of Switch Mode Power Supplies
Protection of power transistors in various electronic circuits
CHECK FOR UP-TO-DATE DATASHEET AT
http://www.avx.com/docs/catalogs/nb12-20.pdf
NB 12
IEC SIZE : 0805
Types
NB 20
IEC SIZE : 1206
2 (.079) ± 0.3 (.012)
3.2 (.126) ± 0.4 (.016)
1.25 (.049)
± 0.2 (.008)
DIMENSIONS:
millimeters (inches)
1.6 (.063)
± 0.25 (.010)
0.5 (.020)
... 1.5 (.059)
0.5 (.020)
... 1.3 (.051)
0.2 (.008) min
0.2 (.008) min
Terminations
0.2 (.008) min
0.2 (.008) min
Nickel Barrier
Marking
On packaging only
Climatic category
40/125/56
Operating temperature
-55°C to +150°C
Tolerance on Rn (25°C)
±5%, ±10%, ±20%
Maximum dissipation at 25°C
Thermal dissipation factor
Thermal time constant
0.12 W
0.24 W
2 mW/°C
4 mW/°C
5s
7s
HOW TO ORDER
NB 12
K0
0103
M
Type
NB = Ni Barrier
NB12 = 0805
NB20 = 1206
NB21 = 0603
Material
Code
K
Resistance
10,000 Ω
Tolerance
M (±20%)
J (±5%)
K (±10%)
BA
Suffix: Packaging
– –: Bulk
0603, 0805
1206
BB: Cardboard tape (180mm diam. reel) BA: Plastic tape (180mm diam. reel)
BF: Cardboard tape (1/2 reel)
BE: Plastic tape (1/2 reel)
BD: Cardboard tape (330mm diam. reel) BC: Plastic tape (330mm diam. reel)
www.avx.com | 79
NTC SMD Thermistors
With Ni Barrier Termination NB 12 - NB 20
TABLE OF VALUES
NB 12
IEC SIZE : 0805
Types
Rn at 25°C
(Ω)
Material
Code
NB 20
IEC SIZE : 1206
B (K)
(⌬B/B
(1) ± 5%
(2) ± 3%
)
␣ at 25°C
(%/°C)
NB 12 KC 0 180
NB 12 KC 0 220
NB 12 KC 0 270
NB 12 KC 0 330
NB 12 KC 0 390
NB 12 KC 0 470
NB 12 KC 0 560
NB 12 KC 0 680
NB 12 KC 0 820
NB 12 KC 0 101
18
22
27
33
39
47
56
68
82
100
NB 12 MC 0 121
NB 12 MC 0 151
NB 12 MC 0 181
NB 12 MC 0 221
NB 12 MC 0 271
NB 12 MC 0 331
NB 12 MC 0 391
NB 12 MC 0 471
NB 12 MC 0 561
NB 12 MC 0 681
NB 12 MC 0 821
NB 12 MC 0 102
NB 12 MC 0 122
NB 12 MC 0 152
NB 12 MC 0 182
NB 12 MC 0 222
NB 12 MC 0 272
NB 12 MC 0 332
120
150
180
220
270
330
390
470
560
680
820
1,000
1,200
1,500
1,800
2,200
2,700
3,300
NB 12 J 0 0332
NB 12 J 0 0392
NB 12 J 0 0472
NB 12 J 0 0562
3,300
3,900
4,700
5,600
NB 12 K 0 0682
NB 12 K 0 0822
NB 12 K 0 0103
6,800
8,200
10,000
K
3630 ± 3%
– 4.0
NB 12 L 0 0123
NB 12 L 0 0153
12,000
15,000
L
3790 ± 3%
– 4.2
NB 12 M 0 0183
NB 12 M 0 0223
NB 12 M 0 0273
NB 12 M 0 0333
18,000
22,000
27,000
33,000
M
3950 ± 3%
– 4.4
NB 12 N 0 0393
NB 12 N 0 0473
NB 12 N 0 0563
39,000
47,000
56,000
N
4080 ± 3%
– 4.6
NB 12 L 2 0683
68,000
L2
3805 ± 3%
– 4.1
NB 12 N 5 0683
NB 12 N 5 0823
68,000
82,000
N5
4160 ± 3%
– 4.7
KC
MC
J
3470 ± 5%
3910 ± 3%
3480 ± 3%
– 3.9
– 4.4
– 3.9
NB 12 P 0 0104
100,000
P
4220 ± 3%
– 4.7
NB 12 SC 0104
100,000
SC
4500 ± 3%
– 4.8
NB 12 P 0 0124
NB 12 P 0 0154
NB 12 P 0 0184
120,000
150,000
180,000
P
4220 ± 3%
– 4.7
NB 12 Q 0 0224
NB 12 Q 0 0274
220,000
270,000
Q
4300 ± 3%
– 4.7
NB 12 R 0 0105
1,000,000
R
4400 ± 3%
– 4.8
80 | www.avx.com
Types
Rn at 25°C
(Ω)
Material
Code
B (K)
(⌬B/B
(1) ± 5%
(2) ± 3%
)
␣ at 25°C
(%/°C)
NB 20 MC 0 221
NB 20 MC 0 102
220
1,000
MC
MC
3910 ± 3%
3910 ± 3%
– 4.4
– 4.4
NB 20 J 0 0472
NB 20 J 0 0562
NB 20 J 0 0682
4,700
5,600
6,800
J
3480 ± 3%
– 3.9
NB 20 J 5 0822
8,200
J5
3480 ± 3%
– 3.9
NB 20 K 0 0103
NB 20 K 0 0123
10,000
12,000
K
3630 ± 3%
– 4.0
NB 20 L 0 0153
NB 20 L 0 0183
NB 20 L 0 0223
15,000
18,000
22,000
L
3790 ± 3%
– 4.2
NB 20 M 0 0273
NB 20 M 0 0333
NB 20 M 0 0393
NB 20 M 0 0473
27,000
33,000
39,000
47,000
M
3950 ± 3%
– 4.4
NB 20 N 0 0563
NB 20 N 0 0683
NB 20 N 0 0823
56,000
68,000
82,000
N
4080 ± 3%
– 4.6
NB 20 N 5 0104
100,000
N5
4160 ± 3%
– 4.7
NB 20 P 0 0124
NB 20 P 0 0154
NB 20 P 0 0184
NB 20 P 0 0224
120,000
150,000
180,000
220,000
P
4220 ± 3%
– 4.7
NB 20 Q 0 0274
NB 20 Q 0 0334
NB 20 Q 0 0394
NB 20 Q 0 0474
NB 20 Q 0 0564
270,000
330,000
390,000
470,000
560,000
Q
4300 ± 3%
– 4.7
NB 20 R 0 0684
NB 20 R 0 0824
NB 20 R 0 0105
680,000
820,000
1,000,000
R
4400 ± 3%
– 4.8
NTC SMD Thermistors
With Ni Barrier Termination NB 21
Chip thermistors are high quality and low cost devices especially developed for surface
mounting applications. They are widely used for temperature compensation but can also
achieve temperature control of printed circuits.
A nickel barrier metallization provides outstanding qualities of solderability and enables this
chip to meet the requirementsof the most severe soldering processes.
APPLICATIONS
•
•
•
•
•
•
•
•
•
LCD compensation
Battery packs
Mobile phones
CD players
Heating systems
Air-conditioning systems
Temperature control of Switch Mode Power Supplies
Compensation of pressure sensors
Protection of power transistors in various electronic circuits
CHECK FOR UP-TO-DATE DATASHEET AT
http://www.avx.com/docs/catalogs/nb21.pdf
NB 21
IEC SIZE : 0603
Types
1.6 (.063) 0.2 (.008)
0.8 (.031)
±0.2 (.008)
DIMENSIONS:
millimeters (inches)
0.8 (.031)
±0.2 (.008)
0.2 (.008) min
0.2 (.008) min
Terminations
Nickel Barrier
Marking
On packaging only
Climatic category
40/125/56
Operating temperature
-55°C to +150°C
Tolerance on Rn (25°C)
±5%, ±10%, ±20%
Maximum dissipation at 25°C
0.07 W
Thermal dissipation factor
1 mW/°C
Thermal time constant
4s
HOW TO ORDER
NB 21
K0
0103
M
BA
Type
Material
Code
K
Resistance
10,000 Ω
Tolerance
M (±20%)
J (±5%)
K (±10%)
Suffix: Packaging
– –: Bulk
BB: Cardboard tape (180mm diam. reel)
BF: Cardboard tape (1/2 reel)
BD: Cardboard tape (330mm diam. reel)
www.avx.com | 81
NTC SMD Thermistors
With Ni Barrier Termination NB 21
TABLE OF VALUES
NB 21
IEC SIZE : 0603
Types
Rn at 25°C Material
(Ω)
Code
B (K)
(⌬B/B
(1) ± 5%
(2) ± 3%
)
␣ at 25°C
(%/°C)
NB 21 KC 0 470
NB 21 KC 0 101
NB 21 KC 0 471
47
100
470
KC
3470 ± 5%
– 3.9
NB 21 MC 0 102
1,000
MC
3910 ± 3%
– 4.4
NB 21 J 0 0472
4,700
J
3480 ± 3%
– 3.9
NB 21 J 5 0682
NB 21 J 5 0103
6,800
10,000
J5
3480 ± 3%
3480 ± 3%
– 3.9
– 3.9
NB 21 K 0 0103
NB 21 K 0 0153
10,000
15,000
K
3630 ± 3%
– 4.0
NB 21 L 0 0223
22,000
L
3790 ± 3%
– 4.2
NB 21 M 0 0333
NB 21 M 0 0473
33,000
47,000
M
3950 ± 3%
– 4.4
NB 21 L 2 0683
68,000
L2
3805 ± 3%
– 4.1
NB 21 N 0 0683
68,000
N
4080 ± 3%
– 4.6
NB 21 N 5 0104
100,000
N5
4160 ± 3%
– 4.7
NB 21 P 0 0154
150,000
P
4220 ± 3%
– 4.7
NB 21 Q 0 0334
NB 21 Q 0 0474
330,000
470,000
Q
4300 ± 3%
– 4.7
82 | www.avx.com
NTC SMD Thermistors
With Ni Barrier Termination NC 12 - NC 20
Chip thermistors are a high quality and low cost device especially developed for
surface mounting applications. They are widely used for temperature compensation
but can also achieve temperature control of printed circuits. Its silver - palladium platinum metallization provides a high degree of resistance to dewetting of the
terminations during soldering (typically 260°C / 30 s).
APPLICATIONS
•
•
•
•
•
•
•
•
•
LCD compensation
Battery packs
Mobile phones
CD players
Heating systems
Air-conditioning systems
Temperature control of Switch Mode Power Supplies
Compensation of pressure sensors
Protection of power transistors in various electronic circuits
CHECK FOR UP-TO-DATE DATASHEET AT
http://www.avx.com/docs/catalogs/nc12-20.pdf
NB 12
IEC SIZE : 0805
Types
NB 20
IEC SIZE : 1206
2 (.079) ± 0.3 (.012)
3.2 (.126) ± 0.4 (.016)
1.25 (.049)
± 0.2 (.008)
DIMENSIONS:
millimeters (inches)
1.6 (.063)
± 0.25 (.010)
0.5 (.020)
... 1.5 (.059)
0.5 (.020)
... 1.3 (.051)
0.2 (.008) min
0.2 (.008) min
Terminations
0.2 (.008) min
0.2 (.008) min
Nickel Barrier
Marking
On packaging only
Climatic category
40/125/56
Operating temperature
-55°C to +150°C
Tolerance on Rn (25°C)
±5%, ±10%, ±20%
Maximum dissipation at 25°C
Thermal dissipation factor
Thermal time constant
0.12 W
0.24 W
2 mW/°C
4 mW/°C
5s
7s
HOW TO ORDER
NC 20
K0
0103
M
BA
Type
NC12 = 0805
NC20 = 1206
Material
Code
K
Resistance
10,000 Ω
Tolerance
M (±20%)
J (±5%)
K (±10%)
Suffix: Packaging
– –: Bulk
0603, 0805
BB: Cardboard tape (180mm diam. reel)
BF: Cardboard tape (1/2 reel)
BD: Cardboard tape (330mm diam. reel)
1206
BA: Plastic tape (180mm diam. reel)
BE: Plastic tape (1/2 reel)
BC: Plastic tape (330mm diam. reel)
www.avx.com | 83
NTC SMD Thermistors
With Ni Barrier Termination NC 12 - NC 20
TABLE OF VALUES
NC 20
IEC SIZE : 1206
NC 12
IEC SIZE : 0805
Types
Rn at 25°C
(Ω)
NC 12 KC 0 180
NC 12 KC 0 220
NC 12 KC 0 270
NC 12 KC 0 330
NC 12 KC 0 390
NC 12 KC 0 470
NC 12 KC 0 560
NC 12 KC 0 680
NC 12 KC 0 820
NC 12 KC 0 101
18
22
27
33
39
47
56
68
82
100
NC 12 MC 0 121
NC 12 MC 0 151
NC 12 MC 0 181
NC 12 MC 0 221
NC 12 MC 0 271
NC 12 MC 0 331
NC 12 MC 0 391
NC 12 MC 0 471
NC 12 MC 0 561
NC 12 MC 0 681
NC 12 MC 0 821
NC 12 MC 0 102
NC 12 MC 0 122
NC 12 MC 0 152
NC 12 MC 0 182
NC 12 MC 0 222
NC 12 MC 0 272
NC 12 MC 0 332
120
150
180
220
270
330
390
470
560
680
820
1,000
1,200
1,500
1,800
2,200
2,700
3,300
NC 12 J 0 0332
NC 12 J 0 0392
NC 12 J 0 0472
NC 12 J 0 0562
NC 12 K 0 0682
NC 12 K 0 0822
NC 12 K 0 0103
NC 12 K 0 0123
NC 12 L 0 0153
NC 12 L 0 0183
NC 12 M 0 0223
NC 12 M 0 0273
NC 12 M 0 0333
NC 12 M 0 0393
NC 12 N 0 0473
NC 12 N 0 0563
3,300
3,900
4,700
5,600
6,800
8,200
10,000
12,000
15,000
18,000
22,000
27,000
33,000
39,000
47,000
56,000
NC 12 L 2 0683
NC 12 N 0 0823
NC 12 P 0 0104
NC 12 P 0 0124
NC 12 P 0 0154
NC 12 P 0 0184
NC 12 Q 0 0224
68,000
82,000
100,000
120,000
150,000
180,000
220,000
84 | www.avx.com
Material
Code
B (K)
(
(1) ± 5%
⌬B/B (2) ± 3%
)
␣ at 25°C
(%/°C)
KC
3470 ± 5%
– 3.9
MC
3910 ± 3%
– 4.4
J
3480 ± 3%
– 3.9
K
3630 ± 3%
– 4.0
L
3790 ± 3%
– 4.2
M
3950 ± 3%
– 4.4
N
4080 ± 3%
– 4.6
L2
N
3805 ± 3%
4080 ± 3%
– 4.1
– 4.6
P
4220 ± 3%
– 4.7
Q
4300 ± 3%
-4.7
Types
Rn at 25°C
(Ω)
NC 20 KC 0 100
10
NC 20 KC 0 120
12
NC 20 KC 0 150
15
NC 20 KC 0 180
18
NC 20 KC 0 220
22
NC 20 KC 0 270
27
NC 20 KC 0 330
33
NC 20 KC 0 390
39
NC 20 KC 0 470
47
NC 20 KC 0 560
56
NC 20 KC 0 680
68
NC 20 KC 0 820
82
NC 20 KC 0 101
100
NC 20 MC 0 121
120
NC 20 MC 0 151
150
NC 20 MC 0 181
180
NC 20 MC 0 221
220
NC 20 MC 0 271
270
NC 20 MC 0 331
330
NC 20 MC 0 391
390
NC 20 MC 0 471
470
NC 20 MC 0 561
560
NC 20 MC 0 681
680
NC 20 MC 0 821
820
NC 20 MC 0 102
1,000
NC 20 MC 0 122
1,200
NC 20 MC 0 152
1,500
NC 20 I 0 0182
1,800
NC 20 I 0 0222
2,200
NC 20 I 0 0272
2,700
NC 20 I 0 0332
3,300
NC 20 J 0 0392
3,900
NC 20 J 0 0472
4,700
NC 20 J 0 0562
5,600
NC 20 J 0 0682
6,800
NC 20 K 0 0822
8,200
NC 20 K 0 0103
10,000
NC 20 K 0 0123
12,000
NC 20 K 0 0153
15,000
NC 20 L 0 0183
18,000
NC 20 L 0 0223
22,000
NC 20 M 0 0273
27,000
NC 20 M 0 0333
33,000
NC 20 M 0 0393
39,000
NC 20 M 0 0473
47,000
NC 20 N 0 0563
56,000
NC 20 N 0 0683
68,000
NC 20 N 0 0823
82,000
NC 20 N 0 0104
100,000
NC 20 P 0 0124
120,000
NC 20 P 0 0154
150,000
NC 20 P 0 0184
180,000
NC 20 P 0 0224
220,000
NC 20 Q 0 0274
270,000
NC 20 Q 0 0334
330,000
NC 20 Q 0 0394
390,000
NC 20 Q 0 0474
470,000
NC 20 R 0 0564
560,000
NC 20 R 0 0684
680,000
NC 20 R 0 0824
820,000
NC 20 R 0 0105 1,000,000
Material
Code
B (K)
(⌬B/B
(1) ± 5%
(2) ± 3%
)
␣ at 25°C
(%/°C)
KC
3470 ± 5%
– 3.9
MC
3910 ± 3%
– 4.4
I
3250 ± 5%
– 3.7
J
3480 ± 3%
– 3.9
K
3630 ± 3%
– 4.0
L
3790 ± 3%
– 4.2
M
3950 ± 3%
– 4.4
N
4080 ± 3%
– 4.6
P
4220 ± 3%
– 4.7
Q
4300 ± 3%
– 4.7
R
4400 ± 3%
– 4.8
NTC SMD Thermistors
Packaging for Automatic Insertion – NC/NB Series
PACKAGING FOR AUTOMATIC INSERTION
NTC CHIP THERMISTOR – NC/NB SERIES
5.5 (.217)
±0.2 (.008)
Max
3°
Super 8 Plastic Tape Packaging:
The mechanical and dimensional reel characteristics are in accordance with the IEC publication 286-3.
30μ ± 5μ
T
K
Designation
Tape width
Tape thickness
Pitch of the sprocket holes
Diameter of the sprocket holes
Symbol
W
T
P0
D0
Distance
Distance (center to center)
Distance (center to center)
Sizes of the
NC 12 (0805)
cavities
E
F
P2
A0
B0
K
Value
8
0.4 max.
4
1.5
-0
1.75
3.5
2
1.5
2.4
1.4 max.
NC 20 (1206)
A0
B0
K
1.95
3.55
1.5 max.
A1
B1
B0
F
R = 0.3 (.012) Max.
AUTOMATIC INSERTION
(.008)
Hole ⭋1 (.039) +0.2
-0
Cover Tape
Max
3°
D0
P2
W
E
P0
Max
3°
Max
3°
A0
Direction of
unreeling
Tolerance
±0.2
±0.1
±0.1
±0.1
±0.05
±0.1
±0.1
±0.1
K ±0.1
(size is adjustable)
(K = t1 +0.2)
±0.1
±0.1
K ±0.1
(size is adjustable)
(K = t1 +0.2)
+0
ø180 (7.09) - 2 (.079)
+ 0.15 (.006)
Reel
ø 62 (2.44)
± 1.5 (.059)
Direction of unreeling
ø 12.75 (.502) - 0
Reel
according to
ISO/DIS 3639-2
8.4 (.331)
14.4 (.567)
max.
+0.15 (.006)
Upper side
Bottom side
+ 0.5 (.020)
ø 20.5 (.087) - 0
QUANTITY PER REEL
Type
NC - NB 12
NC 20 - NB 20
Suffix
BA
BE
BA
BE
Qty Per Reel
4000
2000
3000
1500
www.avx.com | 85
NTC SMD Thermistors
Packaging for Automatic Insertion – NC/NB Series
PACKAGING FOR AUTOMATIC INSERTION
NTC CHIP THERMISTOR – NC/NB SERIES
D0
T
AUTOMATIC INSERTION
10 PITCHES CUMULATIVE
TOLERANCE ON TAPE
0.20mm (0.008)
P0
P2
E1
8mm Paper Tape Packaging:
BOTTOM
COVER
TAPE
The mechanical and dimensional reel
|characteristics are in accordance with
the IEC publication 286-3.
TOP
COVER
TAPE
F
G
T1
T1
Designation
Tape width
Tape thickness
Pitch of the sprocket holes
Diameter of the sprocket holes
Symbol
W
T
P0
Distance
Distance (center to center)
Distance (center to center)
Cover tape thickness
Distance
Distance
Component pitch
0805/0603
0402
CAVITY SIZE
SEE NOTE 1
A0
CENTER LINES
OF CAVITY
Value
8
1.1 max.
4
1.5
-0/+0.1
1.75
3.5
2
0.10 max.
6.25 min.
0.75 min.
4
2
D0
E1
F
P2
T1
E2
G
P1
P1
User Direction of Feed
Tolerance
-.0.1/+0.3
±0.1
±0.1
±0.1
±0.05
±0.05
±0.1
±0.1
+0
ø180 (7.09) - 2 (.079)
+ 0.15 (.006)
Reel
ø 62 (2.44)
± 1.5 (.059)
Direction of unreeling
ø 12.75 (.502) - 0
Reel
according to
ISO/DIS 3639-2
8.4 (.331)
14.4 (.567)
max.
+0.15 (.006)
+ 0.5 (.020)
ø 20.5 (.087) - 0
QUANTITY PER REEL
Type
NB - NC 12
NB 21
86 | www.avx.com
W
E2
B0
Suffix
BB
BF
Qty Per Reel
4000
2000
Upper side
Bottom side
NTC SMD Thermistors
Packaging for Automatic Insertion – NC/NB Series
SURFACE MOUNTING GUIDE CHIP THERMISTOR – APPLICATION NOTES
Wave
STORAGE
300
Good solderability is maintained for at least twelve months,
provided the components are stored in their “as received”
packaging at less than 40°C and 70% RH.
Preheat
Solder Temp.
SOLDERABILITY / LEACHING
Terminations to be well soldered after immersion in a 60/40
tin/lead solder bath at 235 ± 5°C for 2 ± 1 seconds.
Terminations will resist leaching for at least the immersion
times and conditions recommendations shown below.
P/N
Termination
Type
AgPdPt
Nickel Barrier
NC
NB
Solder
Tin/Lead
60/40
60/40
Solder
Temp ºC
260 ± 5
260 ± 5
T
200
230ºC
to
250ºC
150
100
50
0
Immersion
Time Seconds
15 max
30 ± 1
NB products are compatible with a wide range of soldering
conditions consistent with good manufacturing practice for
surface mount components. This includes Pb free reflow
processes with peak temperatures up to 270ºC.
Recommended profiles for reflow and wave soldering are
shown below for reference.
NC products are recommended for lead soldering application
or gluing techniques.
Natural
Cooling
250
1 to 2 min
3 sec. max
(Preheat chips before soldering)
T/maximum 150°C
a) The visual standards used for evaluation of solder joints
will need to be modified as lead free joints are not as bright
as with tin-lead pastes and the fillet may not be as large.
b) Resin color may darken slightly due to the increase in
temperature required for the new pastes.
c) Lead-free solder pastes do not allow the same self alignment as lead containing systems. Standard mounting
pads are acceptable, but machine set up may need to be
modified.
Reflow
300
D2
Natural
Cooling
Preheat
RECOMMENDED
SOLDERING PAD
LAYOUT
Solder Temp.
250
Dimensions in
mm (inches)
220ºC
to
250ºC
150
100
D5
REFLOW SOLDERING
0
1min
1min
Case
Size
P/N
0402
NB23
0603
NB21
0805
NB12
1206
NB20
10 sec. max
(Minimize soldering time)
Temperature °C
D3
D4
200
50
300
250
200
150
100
50
0
0
D1
D1
D2
D3
D4
D5
1.70
(.067)
2.30
(.091)
3.00
(.118)
4.00
(.157)
0.60
(.024)
0.80
(.031)
1.00
(.039)
1.00
(.039)
0.50
(.020)
0.70
(.028)
1.00
(.039)
2.00
(.079)
0.60
(.024)
0.80
(0.31)
1.00
(.039)
1.00
(.039)
0.50
(.020)
0.75
(.030)
1.25
(.049)
2.50
(.098)
WAVE SOLDERING
Case
Size
50
100
150
• Pre-heating: 150°C ±15°C / 60-90s
• Max. Peak Gradient: 2.5°C/s
• Peak Temperature: 245°C ±5°C
• Time at >230°C: 40s Max.
200
250
Time (s)
300
P/N
0603
NB21
0805
NB12
1206
NB20
D1
D2
D3
D4
D5
3.10
(.122)
4.00
(.157)
5.00
(.197)
1.20
(.047)
1.50
(.059)
1.50
(.059)
0.70
(.028)
1.00
(.039)
2.00
(.079)
1.20
(.047)
1.50
(.059)
1.50
(.059)
0.75
(.030)
1.25
(.049)
1.60
(.063)
www.avx.com | 87
NTC DISC Thermistors
ND 03/06/09 • NE 03/06/09 • NV 06/09
• ND: epoxy-phenolic resin coating
NE: epoxy resin coating
(recommended for severe mounting conditions)
NV: epoxy varnish coating
• Leads: Radial copper wire tinned
• Marking: on package only for ND03 & NE03
ND/NE 06/09: Nominal resistance and tolerance for ±5%, ±10%
NV06/09:
Nominal resistance and tolerance
• Delivery Mode: Bulk, reeled or ammopacked
Leaded Discs
N.03
N.06
N.09
APPLICATIONS
• Commodity Product: 2 families
•
•
•
•
ND or NE: general purpose
NV: professional
Alarm and temperature measurement application
Temperature regulation application
Level detection application
Compensation application
CHECK FOR UP-TO-DATE DATASHEET AT
http://avx.com/docs/Catalogs/nd-ne-nv.pdf
HOW TO ORDER
NC06
P0
0103
K
––
Type
Material
Code
P
Resistance
10KΩ
Tolerance
K (±10%)
Packaging
Bulk
LEAD-FREE COMPATIBLE
COMPONENT
PERFORMANCE CHARACTERISTICS
General purpose
Types
ND03 or NE03
Climatic category
Operating Temperature
Tolerance on Rn
(25°C)
Maximum dissipation
at 25°C
Thermal dissipation
factor
Thermal time constant
Response time
Professional
ND09 or NE09
NV06
NV09
–55 to +150°C
–55 to +150°C
55/125/56-434
–55 to +150°C
55/125/56-434
–55 to +150°C
±5%, ±10%, ±20%
±5%, ±10%, ±20%
±2%, ±5%, ±10%
±2%, ±5%, ±10%
0.25 W
0.71 W
0.9 W
0.69 W
0.85 W
5 mW/°C
7.1 mW/°C
9 mW/°C
6.9 mW/°C
8.5 mW/°C
10 s
< 3s
22 s
30 s
18 s
30 s
–55 to +150°C
330Ω to 1MΩ:
±5, 10, 20%
1500Ω to 150 kΩ:
±3%
ND06 or NE06
STANDARDIZATION
OPTIONS
NV range : approved by NFC 93271
Type: TN115 A for NV06
TN116 for NV09
List: GAM-T1
List: LNZ
Consult factory for availability of options:
• other nominal resistance values
• other tolerances
• alternative lead materials or lengths
• controlled dimensions
88 | www.avx.com
NTC DISC Thermistors
ND 03/06/09 • NE 03/06/09 • NV 06/09
TABLE OF VALUES
ND03/NE03 TYPE
ND03/NE03
3.5 (.138) max
35 (1.38) min
3 (.118) max
3 (.118) max
+10%
ø 0.5 (.020)-0.05
2.54 (0.1)
Part Number
Rn at 25°C (Ω)
Material Code
B (K)
(ΔB/B
)
(1) ± 5%
(2) ± 3%
␣ at 25°C (%/°C)
N_03I00331
N_03I00471
330
470
I
3250 (1)
– 3.7
N_03J00681
N_03J00102
680
1,000
J
3480 (2)
– 3.9
N_03K00152
N_03K00222
1,500
2,200
K
3630 (2)
– 4.0
N_03L00272
N_03L00332
2,700
3,300
L
3790 (2)
– 4.2
N_03M00472
N_03M00682
4,700
6,800
M
3950 (2)
– 4.4
N_03N00103
N_03N00153
10,000
15,000
N
4080 (2)
– 4.6
N_03P00223
N_03P00333
22,000
33,000
P
4220 (2)
– 4.7
N_03Q00473
N_03Q00683
47,000
68,000
Q
4300 (2)
– 4.7
N_03R00104
N_03R00154
100,000
150,000
R
4400 (2)
– 4.8
N_03S00224
220,000
S
4520 (2)
– 5.0
N_03T00334
N_03T00474
330,000
470,000
T
4630 (2)
– 5.1
N_03U00105
1,000,000
U
4840 (2)
– 5.3
www.avx.com | 89
NTC DISC Thermistors
ND 03/06/09 • NE 03/06/09 • NV 06/09
ND06/NE06
6.3 (.248) max
35 (1.38) min
3 (.118) max
6.3 (.248) max
35 (1.38) min
NV06
4 (.157) max
+10%
ø 0.6 (.024)-0.05
5.08 (0.2) 䉱
Part Number
Rn at 25°C (Ω)
Material Code
3.5 (.138) max
3 (.118) max
TABLE OF VALUES
ND06/NE06/NV06
+10%
ø 0.6 (.024)-0.05
5.08 (0.2) 䉱
B (K)
(ΔB/B
(1) ± 5%
(2) ± 3%
)
␣ at 25°C (%/°C)
N_06J00151
N_06J00221
150
220
J
3480 (2)
– 3.9
N_06K00331
N_06K00471
330
470
K
3630 (2)
– 4.0
N_06L00681
N_06L00102
680
1,000
L
3790 (2)
– 4.2
N_06M00152
1,500
M
3950 (2)
– 4.4
N_06N00222
N_06N00332
2,200
3,300
N
4080 (2)
– 4.6
N_06P00472
N_06P00682
N_06P00103
4,700
6,800
10,000
P
4220 (2)
– 4.7
N_06Q00153
N_06Q00223
15,000
22,000
Q
4300 (2)
– 4.7
N_06R00333
33,000
R
4400 (2)
– 4.8
N_06S00473
N_06S00683
47,000
68,000
S
4520 (2)
– 5.0
N_06T00104
100,000
T
4630 (2)
– 5.1
N_06U00154
N_06U00224
N_06U00334
150,000
220,000
330,000
U
4840 (2)
– 5.3
For other resistance values, please consult us.
90 | www.avx.com
NTC DISC Thermistors
ND 03/06/09 • NE 03/06/09 • NV 06/09
TABLE OF VALUES
ND09/NE09/NV09
ND09/NE09
9.5 (.374) max
35 (.138) min
+10%
ø 0.6 (.024) -0.05
+10%
ø 0.6 (.024) -0.05
5.08 (.02)
Part Number
Rn at 25°C (Ω)
Material Code
3.5 (.138) max
3 (.118) max
5 (.197) max
3 (.118) max
35 (.138) min
9.5 (.375) max
NV09
5.08 (.02)
B (K)
(ΔB/B
(1) ± 5%
(2) ± 3%
)
␣ at 25°C (%/°C)
N_09J00680
N_09J00101
68
100
J
3480 (2)
– 3.9
N_09K00151
N_09K00221
150
220
K
3630 (2)
– 4.0
N_09L00331
330
L
3790 (2)
– 4.2
N_09M00471
N_09M00681
470
680
M
3950 (2)
– 4.4
N_09N00102
N_09N00152
1,000
1,500
N
4080 (2)
– 4.6
N_09P00222
N_09P00332
2,200
3,300
P
4220 (2)
– 4.7
N_09Q00472
N_09Q00682
4,700
6,800
Q
4300 (2)
– 4.7
N_09R00103
N_09R00153
10,000
15,000
R
4400 (2)
– 4.8
N_09S00223
22,000
S
4520 (2)
– 5.0
N_09T00333
N_09T00473
33,000
47,000
T
4630 (2)
– 5.1
N_09U00683
N_09U00104
N_09U00154
68,000
100,000
150,000
U
4840 (2)
– 5.3
www.avx.com | 91
NTC DISC Thermistors
ND 03/06/09 • NE 03/06/09 • NV 06/09
TAPING CHARACTERISTICS
Missing components
A maximum of 3 consecutive components may be missing
from the bandolier, surrounded by at least 6 filled positions.
The number of missing components may not exceed 0.5%
of the total per packing module.
DIMENSIONS:
The beginning and the end of tape exhibit 8 or 9 blank
positions.
millimeters (inches)
REEL
AMMOPACK
30 (1.18)
Interlayer
Paper
H
⭋ 8 (.315)
L
42 (1.66)
Inside
I
L
330 (13.0)
h
⭋ 31 (1.22)
I
46 (1.81)
H
290 (11.4)
48(1.99)
Outside
⭋ 360 (14.2)
P
h
p
p
Marking on
this side
Reference plane
H1
P1
W2
H1
E
A
B
H
W0
H0 W1
W
Adhesive
tape
I2
d
D0
P0
Direction of unreeling
Cross section
t
A-B
E
Value
18
6
9
3 max.
Tolerance
+1 / -0.5
±0.3
+0.75 / -0.5
4
16/19.5
±0.2
±0.5
W
W0
W1
W2
D0
H0
H1
92 | www.avx.com
Dimensions Characteristics
Leading tape width
Adhesive tape width
Sprocket hole position
Distance between the top of the tape and
the adhesive
Diameter of sprocket hole
Distance between the tape axis and the
seating plane of the component
Distance between the tape axis and the top
of component body
Value
12.7
254
Tolerance
±0.2
±1
0.7
±0.2
+0.6
-0.1
2.54
5.08
5.08
P0
–
t
E
3.85
± 0.7
P1
12.7
0.5
0.6
0
0
±1.0
±5%
±1.3
±2
P
d
3P
3h
Dimensions Characteristics
Sprocket holes pitch
Distance between 21 consecutive holes
20 pitches
Total thickness of tape
Lead spacing
Distance between the sprocket hole axis
and the lead axis
Spacing of components
Lead diameter
Verticality of components
Alignment of components
NTC Accurate Thermistors
NJ 28 • NP 30 • NI 24 • NK 20
High precision resistance and an outstanding ability to reproduce the
sensibility index B, make these ranges of products the types of
thermistors ideal for temperature measurement applications.
Leaded or unleaded, these small size and rapid response time
thermistors are able to meet the most accurate requirements. Parts
are complying to AEC-Q200 requirements.
FEATURES
APPLICATIONS
• Small size
• Tight tollerance
• High precission
• Engine Control Systems
• Airbag Sensor & Control Systems
• ABS/ESP Systems and more
CHECK FOR UP-TO-DATE CATALOG AT
http://www.avx.com/docs/Catalogs/nj-ni-nk.pdf
NJ 28
NP 30
NI 24
NK 20
Finish
Coated chip with phenolic
resin + varnish
+ tinned copper wires
Coated chip with epoxy
AWG30 insulated leads
+ Silver plated nickel wires
Chip
Coated chip with epoxy
0.4 (.016) +10%
-15%
Marking
3 (.118) max
2.4 (.094) max
0.57 (.022) +7%
-7%
1.
± 75 (
0. .0
25 69
(0 )
.1
0)
%
0.4 (.016) +10
- 15%
2.4 (.094) max
35 (1.38) min
millimeters (inches)
35 (1.38) min
3 (.118) max
35 (1.38) min
DIMENSIONS:
3.0 (.118) max
3 (.118) max
3.0 (.118) max
2.8 (.110) max 2.8 (.110) max
0.75 (.030) ± 0.25 (.010)
Types
1.75 (.069) ± 0.25 (0.10)
On packaging only
Operating temperature
-55°C to +150°C
Tolerance on Rn (25°C)
±1%, ±2%, ±3%
Maximum dissipation at 25°C
0.16 W
Thermal dissipation factor*
3 mW/°C
3 mW/°C
2 mW/°C
8s
8s
6s
Thermal time constant
Response time
<2s
HOW TO ORDER
NJ28
MA
0502
F
––
Type
Material Code
MA
(See table below)
Resistance
5KΩ
Tolerance
F (±1%)
Packaging
Bulk
OPTIONS
TABLE OF VALUES
NJ28 • NP30 • NI24 • NK200
Types
Rn at 25°C
(Ω)
Material
Code
N_ _ _ KA 0202
N_ _ _ MA 0302
N_ _ _ MA 0502
N_ _ _ MA 0103
N_ _ _ NA 0103
N_ _ _ PA 0203
N_ _ _ QA 0503
N_ _ _ RA 0104
2,000
3,000
5,000
10,000
10,000
20,000
50,000
100,000
KA
MA
MA
MA
NA
PA
QA
RA
LEAD-FREE COMPATIBLE
COMPONENT
B (K)
(⌬B/B
)
(1) ± 5%
(2) ± 3%
3625 ± 1%
3960 ± 0.5%
3960 ± 0.5%
3960 ± 0.5%
4100 ± 1%
4235 ± 1%
4250 ± 1%
4380 ± 1%
␣ at 25°C
(%/°C)
– 4.1
– 4.5
– 4.5
– 4.5
– 4.6
– 4.8
– 4.8
– 4.9
Consult factory for availability of options:
• other nominal resistance values
• other tolerances
• alternative lead materials or lengths
• controlled dimensions
* – = Add type as outlined above (Example NJ 2 8).
www.avx.com | 93
ADVANCED
TECHNOLOGY
FILTERS
AVX advanced technology filters are
custom designed for a wide range of
high temperature and mission critical
applications.
Innovative solutions include:
• Hermetic High Temperature
Solder-Ins
High frequency, high reliability
filters designed for space savings
in harsh environment applications.
Components can withstand short
high temperature excursions as
high as 400ºC and have an
operating temperature range that
goes up to 200ºC.
Please email AVX at
[email protected] for any
inquiries.
A KYOCERA GROUP COMPANY
Advanced Technology Filters
Hermetic High Temperature Solder-Ins
These are high frequency filters in space saving solder-in designs
which will operate under harsh environments and meet the high
reliability requirements of MIL-F-28861 without outgassing. AVX Filters
Corporation has designed a filter which sets a new standard for the
industry. These feed-thru filters are constructed with hi-rel
semiconductor materials and rugged MLC discoidal capacitors. They
are also manufactured at high temperatures (>500°C) without fluxes,
epoxies or other polymers, thus eliminating failure mechanisms
associated with conventional solder-ins. These solder-ins withstand
short temperature excursions as high as 400°C, and can actually be
operated at temperatures to 200°C. Available either as discrete
packages in standard case sizes or as multiple filter brackets, all have
hermetic glass-to-metal seals on both ends.
FEATURES
•
•
•
•
•
Standard sizes
Epoxy free construction
Hermetic on both ends
MIL-PRF-31033 Discoidal Capacitor
400°C installation
AVX FILTERS
SOLDER-IN STYLE FILTER
STANDARD
CONSTRUCTION
HERMETIC
CONSTRUCTION
DISCOIDAL
CAPACITOR
EPOXY
HOUSING
HIGH TEMPERATURE
METALURGICAL BOND
CONDUCTIVE
POLYMER
EPOXY
ADHESIVE
HOUSING
SEALING GLASS
DISCOIDAL
CAPACITOR
GLASS SEAL
HIGH TEMPERATURE
METALURGICAL BOND
GLASS SEAL
LEAD
STYLE
SPECIFICATIONS
CHARACTERISTICS
• Discrete, hermetically sealed solder-in
filters
• Operating temperature range:
-55°C to 200°C
• Rugged monolithic ceramic capacitor
construction
AVX Filters Series*
• 400°C rated installation temperature
WQ:
XQ:
YQ:
ZQ:
.400" Case Diameter
.250" Case Diameter
.165" Case Diameter
.128" Case Diameter
• Voltage range: 50 to 300VDC
• Capacitance Range: 10 pF to 1.2 μF
• Capacitor attached with solderless,
fluxless, high temperature metallurgical
bond
• Hermeticity: 1 x 10-7 ATM cm3/sec
minimum
• Hermetic glass-to-metal seals on
both ends
• Custom design available
• Multiple filter arrays
-Custom bracket housing employing
discrete hermetic filters
- Custom rugged bracket housings with
inter-rated hermetic filtered feed-thrus
• Rated current: up to 15 amps
• Circuits: C
• Designed to meet or exceed
requirements of MIL-F-28861
• No epoxies, resins or polymers to
outgas or degrade in harsh
environments
www.avx.com | 95
DOWN-HOLE
APPLICATION NOTES
With extreme temperatures, high
pressure, and high mechanical
stress, down-hole applications
present some of the toughest
environments for passive
components. AVX understands
these challenges and is committed
to meeting the demands of downhole applications through innovative
passive component solutions
designed to maintain optimal
performance in extreme conditions.
A KYOCERA GROUP COMPANY
Down-Hole Application Notes
OVERVIEW
The global demand for oil and gas drives the development of
increasingly sophisticated equipment utilized in down-hole oil
exploration. Advanced down-hole electronics must provide
optimal performance while subject to extreme environmental
conditions below the earth’s surface. Drilling depths of more
than 7 miles result in internal module temperatures approaching
or surpassing the 200°C mark and they continue to escalate.
In down-hole oil exploration, electronic sensors are utilized to
relay information from the tool beneath the surface of the earth, to
the drilling engineers on the oil rig. This information is collected by
various sensors within the tool. Information logging consists of
sending, receiving, recording and analyzing of essential data
allowing engineers to make critical decisions on further drilling
operations based on the characteristics of the material
surrounding the well trajectory. In order to fulfill these demanding
requirements, AVX provides a wide range of products that are
capable of withstanding extreme temperatures. These
components are implemented into logging modules such as
sonic, gamma-ray, density, and resistivity logging tools.
AVX offers high temperature solutions through both ceramic and
tantalum capacitors, each of which provides distinct highly reliable
characteristics depending on what the application requires. AVX
capacitors offer variety to meet today’s size, voltage, temperature,
and value constraints of many applications.
Ceramic Capacitors
AVX offers multilayer ceramic capacitors for high temperature
applications. With manufacturing plants all over the world with
state of the art equipment, AVX ceramic capacitors exhibit
excellent reliability and performance. The construction of these
capacitors is the key advantage of AVX ceramic products.
Multilayer ceramic capacitors are constructed with alternating
layers of ceramic dielectric material, and layers of conductive
electrode material. This is done by utilizing tape casting
techniques or wet lay down techniques, depending on the type
of capacitor, and then screen-printing the electrode material on
top of the ceramic layer. As shown in Figure A, terminations are
then added to the ends of the capacitor which connect the
internal electrodes and allow for the capacitor to either be
soldered to the board (SMD) or to the leads.
End Terminations
Terminated
Edge
Electrodes
Terminated
Edge
Margin
Electrodes
Due to their construction and materials, there are certain
requirements necessary to consider when using multilayer
ceramic capacitors. While ceramic materials have exceptional
compressive strength, they can be susceptible to fractures due
to tensile stress. It is necessary to choose particular options
provided by AVX products to address this issue. Custom leads
are recommended for high vibration conditions as well as for
temperatures that may exceed the recommended operating
temperature. The custom leads and terminations absorb the
tensile stress and prevent cracking in the ceramic capacitor.
Thermal shock should also be considered to reduce the risk of
differential expansion caused by the increased temperatures.
AVX provides highly reliable ceramic capacitors that take
possible failure modes into consideration and provide a high
quality product with exceptional performance while performing
in harsh conditions.
Tantalum Capacitors
BACKGROUND
Ceramic
Layer
AVX ceramic capacitors can also be encapsulated in a casing
and fit with leads to further increase environmental durability.
The encapsulated capacitors are then epoxy filled with a
material that is CTE matched to the ceramic material.
Electrodes
Terminated
Edge
Figure A
Multilayer ceramic capacitors can be stacked to increase the
electrical capabilities of the capacitor (capacitance and voltage).
Since capacitance is additive when connected in parallel, the
stacked construction can create high capacitance values while
taking up the same footprint on the PCB.
AVX manufactures both dry tantalum and wet tantalum
capacitors for high temperature applications, each having its
own unique manufacturing process.
As shown in Figure B, tantalum chip capacitors incorporate a
porous tantalum metal pellet which forms the anode, while its
oxide layer makes up the dielectric. AVX tantalum technology
uses manganese dioxide as the counter electrode (cathode)
with self-healing properties for long life. This construction allows
for very high capacitance in a small package.
Figure B
Wet tantalum capacitors are constructed inside of a cylindrical
tantalum can, containing the tantalum anode along with an
electrolytic solution. A proprietary cathode is incorporated and
allows for less wasted space which makes the wet tantalums
an ideal candidate for high capacitance in a small size
component.
The wet tantalums and tantalum chips are available with
maximum operating temperatures from 175°C to 200°C. The
leads on these products also absorb mechanical shock from
vibration in down-hole applications.
For applications with temperatures above 200°C, AVX has
developed a new construction technology (THH series) that
uses a ceramic casing around the tantalum chip. THH series
can operate at temperatures up to 230°C. These are
hermetically sealed parts, capable of reliable operation in harsh
environments.
AVX provides products that exhibit optimal performance
characteristics in down-hole environments. Whether ceramic or
tantalum, AVX has a solution for the needs of the high
temperature applications market.
www.avx.com | 97
Down-Hole Application Notes
SONIC LOGGING TOOL
Sonic logging is implemented in down-hole applications to
determine the porosity of the materials surrounding the well
hole. Facilitating sonic logging, the acoustic module consists of
various piezoelectric sensors driven by voltage regulators,
amplifiers, filters, and shaping networks that send and receive
the acoustic signal the engineer uses to help determine the
depth and direction of the down-hole tool. Due to the extreme
conditions inside the well, the electronic module’s components
must be able to withstand vibrations and high temperatures
during normal operating life conditions.
Sonic sensors used for porosity measurements in down-hole
applications typically operate at lower frequencies in order to
penetrate the dense surrounding materials. Tantalum capacitors
perform exceptionally well at these low operating frequencies.
AVX offers high temperature wet tantalum capacitors as well as
high temperature tantalum chips. These tantalum products
have operating temperatures up to 230°C with capacitance
values ranging from 0.1μF-680μF and rated voltages from
3.6VDC-125VDC.
Sonic Tool Voltage Multiplier Diagram:
Surface Level Equipment
Down-Hole Level Equipment
Transmitter
Voltage
Multiplier
Voltage
Multiplier
Transducer
Receivers
Data
Recording
Voltage
Multiplier
EMI Filter
Capacitor
Transducer
EMI Filter
Capacitor
5 Stage Voltage Multiplier
+
OUT
-
The sonic module consists of a transmitter and a receiver. The
transmitter directs a low frequency acoustic signal around the
borehole, part of which bounces back to the receiver. To filter
the noise out of the signal, a high temperature tantalum
capacitor is utilized, like AVX’s THH. Ta capacitors exhibit high
capacitance per volume due to the characteristics of the
tantalum pentoxide dielectric layer. The dielectric layer is a thin
film with a high dielectric constant and has a high surface area
98 | www.avx.com
GAMMA-RAY LOGGING TOOL
The Gamma-Ray Log helps measure the amount of shale in a
formation by measuring the naturally occurring radiation from
various isotopes of the elements potassium, thorium, and
uranium. Although the gamma-ray log cannot measure porosity
like the sonic log, it is an excellent indicator of shale. Noting the
differences in the Gamma-Ray Log and the porosity log (sonic
log), engineers are able to estimate the volume of shale within a
formation.
Gamma-Ray sensors are subject to extremely harsh conditions.
Being implemented into the tool, these sensors operate deep
below the surface where temperatures can exceed 200°C.
Along with drastic temperature increases, the vibration in the
tool is severe. It is necessary for the components in these
sensors to have high temperature capabilities as well as
optimum mechanical shock and vibration characteristics.
Transducer
EMI Filter
Capacitor
Data
Recording
The HV multiplier commonly utilizes SMT miniature HV MLCCs
ranging in size from 0805 to 2225. AVX offers high voltage MLC
chip and radial leaded options. C0G, N1500 and X7R dielectric
materials are available in high voltage applications up to 5kV.
Special design criteria in the HV radial series and AVX high
voltage MLC chips allow for low leakage, capacitance values up
to 15μF and tolerances as tight as 5%.
Gamma-Ray logs consist of gamma ray sensors that convert
the detected radiation to a corresponding electrical signal. High
voltage regulators, amplifiers, and decoupling ceramic
capacitors used in and in-between stages, are used to transmit
the signal from the gamma-ray sensor up to the surface for log
evaluation. The low voltage signals are sometimes converted to
higher voltages to improve signal to noise ratios of systems.
Power
Supply
Shaping
Network
due to the micro-porosity of the tantalum anode. Because
capacitance is directly related to the dielectric constant and
surface area, and inversely related to the thickness of the
dielectric material, this technology provides very high volumetric
efficiency.
AVX offers high temperature ceramic capacitors designed
specifically for these conditions. AVX high temperature ceramic
stacked capacitors have exceptional 200°C performance with
capacitance values up to 340μF. When using gamma radiation,
the components must also be suitable at very high frequencies.
Class I (C0G/NP0) ceramic capacitors are capable of
withstanding the high frequency requirements in Gamma-Ray
detection sensors as well as voltages up to 500V. Stacked
ceramic capacitors are offered in various sizes, custom shapes,
many lead styles including soft custom leads, and can even be
encapsulated. These options allow the components to endure
extreme mechanical shock and vibration conditions that
Gamma-Ray sensors will encounter in the well.
DENSITY LOGGING TOOL
The density tool is used to measure the bulk density, and
ultimately porosity, of formations around well holes using
gamma-rays. The density tool consists of a gamma-ray
emitter (nuclear source), driven by a high voltage supply, and
two or more gamma-ray detectors (receivers).
AVX ceramic capacitors are used in density sensor
applications. As seen in the circuit, density sensors
incorporate multiple filtering and decoupling capacitors.
These capacitors need to be capable of high voltages and
Down-Hole Application Notes
Radiation Tool High Voltage Supply Diagram:
High Rel / High
Frequency NPO
IN
Filter Cap
Bias
Cap
Digital
Signal
Decoupling
Cap
Digital
Signal
HV
Decoupling
Cap
High
Voltage
Filter Cap
+
downhole environments, it is recommended that a high
temperature capacitor with and NP0 dielectric be
implemented to reduce the effects of capacitance drift with
temperature. The NP0 dielectric material has the lowest
capacitance change vs. temperature, making them an
optimum candidate for filtering. See plot below.
Δ Capacitance vs. Temperature
Percentage Capacitance Change
high frequencies. Due to its excellent performance in harsh
environments, high reliability NP0 ceramic capacitors are
chosen for these applications. As previously mentioned, AVX
ceramic stacked capacitors have capacitance values up to
340μF and can withstand voltages up to 500V with no
derating necessary. The effects of non-ideal parasitics in a
capacitor become critical when using the capacitor for
filtering to improve voltage quality with low ESR and low ESL
being the most important factors. Superior ESR and ESL
characteristics, along with advantageous volumetric
capabilities, are the main qualities that make stacked MLCC
capacitors ideal for these applications.
0
-20
-40
X7R
NPO
-60
-75
-50
-25
OUT
0
25
50
75
100
125
150
175
200
Temperature (ºC)
-
RESISTIVITY LOGGING TOOL
To reduce noise at low frequencies, a large enough
capacitor must be used with low leakage current, along with
a bypass capacitor for higher frequencies connected from
V+ to ground. Tantalum capacitors offer large capacitance
values in a small package, performing well at low
frequencies; while ceramic capacitors offer great decoupling
capability at higher frequencies.
Resistivity logs are used to indirectly measure the resistance
of the various formations around a borehole.
Temperature VFC Tool Diagram:
High Rel / High
Frequency NPO
High Voltage
Ceramic Capacitor
The resistivity tool works by probing the various formations
with magnetic fields that induce a current in the formation.
Since current will flow through low resistance material, and
fail to flow through high resistance material (like
hydrocarbons), the resistivity tool helps to determine
possible locations of oil deep inside the earth’s crust.
Several tools are used to measure resistivity including: the
electric tool, induction tool, and focused electric tool. The
three different tools conduct three different resistivity
measurements on the formation surrounding the borehole:
As with all electronic devices, power must be supplied for
the device to become operational. Because high
temperatures can vary the output of the resistivity tool’s
power supply, and damage the resistivity tool’s components,
temperature compensation is used to control the output so
that it does not become unstable. The temperature
compensation network consists of a temperature-current
transducer, like a thermistor, and a voltage to frequency
converter used as feedback to control the output of the
power supply.
The temperature compensation of network’s voltage to
frequency converter uses the thermistor’s current to output
a signal that can control the power supply’s operation, while
a timing capacitor is used to set the frequency of the VFC.
For the voltage-to-frequency operation to be a success it is
crucial that the RC network have the correct time constant,
specified by the VFC device. Since the input to the capacitor
can change polarity, and temperatures can vary greatly in
Ceramic Capacitor decouples
at high frequencies
Tantalum Capacitor decouples
at low frequencies
V+
+
C = 0.1μF
C = 6.8μF
-
NTC
Thermistor
Voltage-toFrequency
Converter
PCB Ground
Vout
C1 = 0.01μF
NP0/C0G
Timing Capacitor sets
the VFC’s frequency
SUMMARY
Downhole oil exploration and other high temperature
applications require that every component exposed to high
temperature meet the high standards of that industry. AVX
components provide solutions to a wide variety of these
applications. High reliability and ideal performance under
these harsh environmental conditions is the advantage AVX
offers over competitive products. Many options and
customizable designs are available for AVX components in
order to suit the needs of all application requirements.
www.avx.com | 99
AMERICAS
EUROPE
ASIA-PACIFIC
ASIA-KED
(KYOCERA Electronic Devices)
AVX Greenville, SC
AVX Limited, England
Tel: 864-967-2150
Tel: +44-1276-697000
AVX Northwest, WA
AVX S.A.S., France
Tel: 360-699-8746
Tel: +33-1-69-18-46-00
AVX/Kyocera, Asia, Ltd.,
Hong Kong
AVX Midwest, IN
AVX GmbH, Germany
Tel: +852-2363-3303
Tel: 317-861-9184
Tel: +49-0811-95949-0
AVX/Kyocera (S) Pte Ltd.,
Singapore
KED Hong Kong Ltd.
Tel: +852-2305-1080/1223
Tel: +65-6286-7555
AVX Mid/Pacific, CA
AVX SRL, Italy
AVX/Kyocera Yuhan Hoesa,
South Korea
Tel: 408-988-4900
Tel: +39-02-614-571
Tel: +82-2785-6504
AVX Northeast, MA
AVX Czech Republic
Tel: 617-479-0345
Tel: +420-57-57-57-521
AVX/Kyocera HK Ltd.,
Taiwan
KED Hong Kong Ltd.
Shenzen
Tel: +86-755-3398-9600
KED Company Ltd.
Shanghai
Tel: +86-21-3255-1833
KED Hong Kong Ltd.
Beijing
Tel: +86-10-5869-4655
Tel: +886-2-2656-0258
AVX Southwest, CA
AVX/ELCO UK
Tel: 949-859-9509
Tel: +44-1638-675000
AVX/Kyocera (M) Sdn Bhd,
Malaysia
AVX Canada
ELCO Europe GmbH
Tel: +60-4228-1190
Tel: 905-238-3151
Tel: +49-2741-299-0
AVX South America
AVX S.A., Spain
AVX/Kyocera International
Trading Co. Ltd.,
Shanghai
Tel: +55-11-4688-1960
Tel: +34-91-63-97-197
Tel: +86-21-3255 1933
AVX Benelux
AVX/Kyocera Asia Ltd.,
Shenzen
Tel: +65-6509-0328
Tel: +86-755-3336-0615
Kyocera Corporation
Japan
AVX/Kyocera International
Trading Co. Ltd.,
Beijing
Tel: +81-75-604-3449
Tel: +31-187-489-337
KED Taiwan Ltd.
Tel: +886-2-2950-0268
KED Korea Yuhan Hoesa,
South Korea
Tel: +82-2-783-3604/6126
KED (S) Pte Ltd.
Singapore
Tel: +86-10-6588-3528
AVX/Kyocera India
Liaison Office
Tel: +91-80-6450-0715
Contact:
A KYOCERA GROUP COMPANY
http://www.avx.com
S-HTG0M315-N
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement