Xvision VIS450R Start Manual
Xvision VIS450R is a high-quality camera with a stylish design that is suitable for both indoor and outdoor use. The device uses a 1/3" Super HAD CCD image sensor and Xvision IXC1DN Digital Signal Processing (DSP). Due to these components, the camera can produce 480TVL resolution images with 0.1 lux low light sensitivity. The camera also features long-life infrared LEDs that turn on automatically when the camera switches to black and white mode, providing night vision up to 50 meters. The light emitted from the infrared LEDs is not visible to the human eye, but the camera can clearly see it. The VIS450R has a durable, corrosion-proof metal casing and is designed for external use and wall mounting. It comes with an integrated sun/rain shield for added protection from the elements.
Advertisement
Advertisement
CCTV
TECHNICAL SUPPORT:
For Technical Support for any Xvision product please contact your local distributor.
LIMITED WARRANTY:
This product is supplied with a 2 Year warranty. The Warranty excludes products that have been misused, (including accidental damage) and damage caused by normal wear and tear. In the unlikely event that you encounter a problem with this product, it should be returned to the place of purchase.
Manufactured exclusively for:
Xvision (Europe) Group,
Head Office: London, U.K.
Email: [email protected]
Web: www.x-vision.co.uk
CCTV
Model:
VIS430R
Colour 30 metre IR Long
Range Camera
Model:
VIS450R
Colour 50 metre IR Long
Range Camera
Before you begin
•
Please unpack the box carefully and identify that all the parts are present.
The camera is suitable for indoor or outdoor use. Please bear in mind the following points when choosing a mounting position.
•
The camera must be positioned so that it will not point directly into the sun (sunrise and sunset) or any bright light, as this may cause damage to the camera.
•
Avoid viewing areas where half the area is in bright sunlight and the other half is dark, such as in the shadow of a building. All types of cameras have difficulty in ‘seeing’ with such a large lux level variation.
•
Do not cut the camera cables, this will void the warranty.
•
Make sure you use only the recommended power supply. Damage caused to the camera by incorrect voltage or wiring is not covered by the warranty.
Model:
VIS430R/450R
Colour 30/50 metre IR Long
Range Cameras
1. Contents
2 3
4
1
5
A B C
A
B
4
5
C
ITEM
1
2
3
NAME OF PART
Instruction Manual
Long Range IR Camera
Camera Bracket 1
Camera Bracket 2
Accessories Bag containing A, B, C
In the mounting bracket box contained within the main camera box you will find the following items:
QTY
1
1
1
Fixing screws for Bracket 1 & Camera Body 4
Hex head bolt for fixing Bracket 1 & 2 1
L-wrench
1
1
1
7
F
E
D
6
ITEM
6
7
D
E
F
NAME OF PART
Wall Mount Bracket
Accessories Bag containing D, E, F
Fixing screws
Wall Plugs
Mounting Bolts
QTY
1
1
4
4
2
Specification
Model:
Picture Type:
VIS430R/VIS450R
Day/Night (B/W & Colour)
Image Sensor:
DSP:
Resolution:
Lens Viewing Angle:
Sony 1/3” Super HAD CCD
Xvision IXC1DN
480TVL
43° (VIS430R)
35° (VIS450R)
Infra Red Nightvision: 30 metres (VIS430R)
50 metres (VIS450R)
0.1 Lux Minimum Illumination:
Audio:
Operating Voltage:
No
12V DC 1500mA
Suggested Power Supply: 12V DC 3500mA Regulated
Mounting:
Weatherproofing:
Dimensions:
Wall
Yes
Ø 104.7x182.5mm
STEP 4: The horizontal and vertical angles can be adjusted by loosening
(as shown in Figure 4).
Figure 4
2. Product Description
The VIS430R/VIS450R Colour Long Range IR cameras are designed for medium to high risk applications. Their traditional styling makes them ideal for use in situations where an instant deterrent or heavy duty camera is required and they offer high resolution 480 TVL images from their Sony 1/3" Super HAD CCD sensors and will provide images in complete darkness up to 30 to 50 metres (depending on model) and beyond 30 to 50 metres in light levels above 0.1 lux. The cameras can be used externally and can be wall mounted, they also feature an integrated sun/rain shield.
3. Features
Dual mode Very High Resolution CCD sensor provides very good quality
Colour images in low light conditions of 0.1 lux or above and B/W images in low light conditions below 0.1 lux and in complete darkness
Integrated Long Life Infra Red LEDs turn on automatically when the camera switches to B/W mode and provides 30 to 50 metres night vision
Light emitted from the Infra Red LEDS is not visible to the human eye, however to the camera the light is clearly visible
Traditional styling makes them ideal for use in situations where an instant deterrent or heavy duty camera is required
Sony 1/3" Super HAD CCD image sensor for 480 TVL resolution images and 0.1 lux low light sensitivity
Xvision IXC1DN Digital Signal Processing (DSP) chip which has been optimised for internal or external viewing and features Auto Gain
Control, Auto Electronic Iris, Auto White Balance, Back Light
Compensation, Low Smear, Edge Enhancement, Zero Colour Rolling and
Day/Night
The VIS430R features a 6.0mm focus free lens for a 43° viewing angle and up to 30 metres night vision and the VIS450R features an 8.0mm
lens for a 35° viewing angle and up to 50 metres night vision
Durable Corrosion Proof Metal Casing
Designed for External use and Wall mounting with the bracket supplied
Integrated sun/rain shield
4. Installation & Operation
STEP 1: Place Bracket 2 onto the desired ceiling or wall and fix using four screws (as shown in Figure 1).
4
Figure 1
STEP 2: Alternatively you can attach Bracket 2 to the Mounting Bracket supplied (as shown in Figure 2).
F
Figure 2
STEP 3: Secure Bracket 1 and the camera onto Bracket 2 using the screws
(as shown in Figure 3).
4
A
3
B
3
3
A
2
Figure 3
4
A
3
B

Public link updated
The public link to your chat has been updated.
Advertisement