Bosch | LTC 8850 Series | LTC 8x00/90 Integrated Series Allegiant Matrix/Control Systems

Video | LTC 8x00/90 Integrated Series Allegiant Matrix/Control Systems
LTC 8x00/90 Integrated Series Allegiant
Matrix/Control Systems
www.boschsecurity.com
The LTC 8100 Series, LTC 8200 Series, and LTC 8300
Series Allegiant® video switcher/control systems
combine both switching and computer technology to
provide powerful performance and unique system
features for the security user. Offering full matrix
switching capability, these systems can be
programmed to display the video from any camera on
any monitor, either manually or via independent
automatic switching sequences.
These systems provide from 8 camera inputs, 2
monitor outputs to 32 camera inputs, 6 monitor
outputs, 2 to 4 keyboards, 8 to 32 direct connect
alarm input points, an integral signal distribution unit,
and a computer interface port. A logging printer port is
available in the LTC 8300 Series systems.
These systems can be programmed with up to 60
sequences which can be run independently of each
other in either a forward or reverse direction.
Any of the sequences can utilize the SalvoSwitching
capability where any number of system monitors may
be selected to switch as a group. Using the optional
LTC 8059/00 Master Control Software package or the
LTC 8850/00 Graphical User Interface software
package, sequences can be made to activate and
deactivate automatically based upon the time of day
and the day of week.
u
Models from 8 cameras by 2 monitors to 32 cameras
by 6 monitors
u
Compact single bay construction
u
Integral alarm interface and signal distribution
u
Powerful alarm handling features
u
SalvoSwitching® and SatelliteSwitch® capability
Utilizing the unit’s integral signal distribution ports,
connections to on-site receiver/drivers are easily
made. On-site receiver/drivers provide operator
control of pan, tilt, zoom; multiple pre-positions; four
auxiliaries; auto-pan, and random scan. These systems
also support variable speed operation and full
programming functions of AutoDome® Series dome
cameras.
When combined with an LTC 8016 Allegiant Bilinx™
Data Interface unit, these switcher/controllers support
operations using Bilinx communication. With Bilinx,
PTZ control is accomplished using a bidirectional
communication protocol embedded in the video signal
of Bosch Dinion™ and AutoDome® CCTV cameras. In
addition, Bilinx uses the standard video cable to
transmit alarm and status messages from the cameras,
providing superior performance without the need for
separate data transmission cables.
With their built-in alarm interface capability, an
external contact closure or logic level can be used to
automatically activate any camera to be displayed. Any
monitor or group of monitors can be set to display
cameras under alarm conditions. The base system
contains three built in alarm response modes: basic,
auto-build, and sequence & display. In addition to
these three modes, the PC-based software packages
2 | LTC 8x00/90 Integrated Series Allegiant Matrix/Control Systems
offer the ability to combine any or all of the three
standard modes within the same system. Alarm video
may be selected to reset either manually or
automatically. In addition, a 16‑character alarm title
can be selected to appear instead of the camera title
during alarm conditions.
System operation and programming is accomplished
using a full-function, ergonomically designed keyboard
(sold separately). Built-in operator priority levels and
the ability to restrict certain operators from controlling
designated functions provide maximum flexibility.
These systems include a black outlined 48-character
on-screen display for time-date, camera number,
camera ID (16-characters), an icon to identify
controllable cameras, and monitor (12-characters) or
status information. Over 235 characters are available
when programming camera ID and monitor titles.
Utilizing a Windows®-based PC and the optional
LTC 8059/00 Master Control Software package or
LTC 8850/00 GUI software, enhanced programming
and switching features can be obtained. A userfriendly spreadsheet format provides the ability to
enter camera and monitor titles, program of operator
names and priorities, 64 timed event actions, change
system parameters, program camera sequences, install
lockouts, and access the advanced alarm handling
screens with speed and efficiency. The programmed
information may then be transferred into the Allegiant
system, stored on disk, or printed out directly from a
printer connected to the PC.
The LTC 8850/00 Bosch GUI software is designed
around an intuitive graphic-based interface. The GUI
provides high performance programming, control and
monitoring of all system functions by using on-screen
icons to reflect real time status of the devices
controlled by the system. The LTC 8850/00 GUI
software also provides the ability to monitor system
status events. System alarms, switching functions,
sequence events, keyboard actions, and video loss
information can be viewed in real time on the PC
screen and, if desired, logged to the PC hard drive.
The software also provides the ability to enable an onscreen indicator for easy identification of controllable
cameras.
The LTC 8300 Series contain a logging printer output
port which accepts a standard RS 232 serial printer.
This provides a permanent record of system status
showing time and date for changes such as: incoming
alarms, acknowledgment of alarms, sequence loading,
user log-on to keyboard, transfer of system tables and
sequences, video loss messages, and a power up reset
message. In addition, the printer can be used to obtain
a hard copy of the system's configuration tables and
sequences.
These systems provide powerful macro capabilities.
The macros can be activated using Allegiant Series
keyboards, system time event functions, alarm
activations, and via special function icons in the
LTC 8850/00 GUI software.
These systems can serve as the master switcher in a
SatelliteSwitch® configuration. This innovative
SatelliteSwitch feature enables a single system to
communicate with remotely located "Satellite"
systems. Any Allegiant model can serve as a master or
remote Satellite switcher. This powerful feature
permits the design of a distributed matrix video
switching system with control at one central location
and individual control at the local sites. The main
control site can view/control local cameras plus
cameras located at any of the remotely distributed
Satellite sites. The Satellite sites can view/control only
cameras associated with their own site. When used in
this type of configuration, the main system can access
up to 256 cameras located anywhere in the system.
Windows is a registered trademark of Microsoft Corp.
Certifications and Approvals
Electromagnetic
Compatibility (EMC)
Complies with FCC Part 15, ICES-003, and CE
regulations
Product Safety
Complies with CE regulations, UL, CSA, EN,
and IEC Standards
Installation/Configuration Notes
LTC 8300 Series
Main CPU Bay
1
2
3
4
5
6
BOSCH
Prod
BOSCH
Mon
Prod
Shot
Clr
Mon
Shot
Clr
1
2
3
1
2
3
4
5
6
4
5
6
7
8
9
7
8
9
0
0
Typical LTC 8300 Series Configuration Diagram
1
Additional System Cameras
2
Up to 32 Video Inputs Maximum
3
3 m (10 ft) Interconnect Cable Supplied with Keyboard
4
Video Coax
5
Up to six (6) Monitor Outputs
6
Maximum of four (4) Allegiant Series Full Function Keyboards up to
1.5 km (5000 ft) Away Using Optional Remote Hookup Kit
7
LTC 8300 Series Main CPU Bay
3 | LTC 8x00/90 Integrated Series Allegiant Matrix/Control Systems
BOS CH
BOS CH
BOS CH
BOS CH
Prod
Mon
Shot
Clr
1
2
3
4
5
6
7
8
9
0
LTC 8300 Series Full Capacity Configuration Diagram
(32 Cameras by 6 Monitors)
Typical Main Allegiant Control Center
1
Typical System Monitors
(Local and/or Remote Video)
Video Coax
2
Video
3
Twisted-Pair Typical
3
Typical Fixed Cameras
4
32 Separate Alarm Inputs
4
Typical Alarm Input Contact to Activate Local or Satellite Cameras
5
Contact Closure or Active Low Logic Level
5
Typical Controllable Camera
6
Six (6) Pairs of Relay Outputs
6
Typical LTC 8100, LTC 8200, or LTC 8300 Allegiant System
7
Pan and Tilt
7
Bi-Phase Data Lines to All Local PTZ Camera Sites
8
Receiver/Driver
8
Typical IntuiKey Keyboard
9
Up to 32 Receiver/Driver Units
9
Bi-Phase Control and Satellite Switching Data
1
0
Up to 1.5 km (5000 ft) Using 18 AWG Shielded Twisted Pair
Cable (Belden 8786 or Equivalent)
1
0
One (1) Bi-Phase Data Line to Each Remote Satellite Site
1
1
Optional LTC 8059/00 MCS or LTC 8850/00 GUI Software
Package can be Run on a Windows® based PC
1
1
Incoming Video TRUNK Lines From All Satellite Sites
1
2
Additional System Cameras
1
2
Typical Allegiant Satellite Site
1
3
3 m (10 ft) RS-232 Interface Cable provided with Optional
Software Package
1
3
Typical Local Monitors (Local Video Only)
1
4
LTC 8300 Series Main CPU Bay
1
4
Typical Fixed Cameras
1
5
Serial RS-232 Logging Printer Capability
1
5
Typical Alarm Input Contact (For Local Alarms Only)
1
6
3 m (10 ft) Interconnect Cable Supplied with Keyboard
1
6
Bi-Phase Data
1
7
Up to six (6) Monitor Outputs
1
7
IntuiKey Keyboard (PTZ Control of Local Cameras Only)
1
8
Maximum of 4 Allegiant Series Full-Function Keyboards up to
1.5 km (5000 ft) Using Optional Remote Hookup Kit
1
8
LTC 8780 Data Converter
1
9
LTC 8569 Code Merger
2
0
Bi-Phase Control + Satellite Data
1
Typical AutoDome Camera
2
4 | LTC 8x00/90 Integrated Series Allegiant Matrix/Control Systems
Technical Specifications
Switching
Crosspoint matrix
System
DC Output
0V
Capacities
1 Meets EIA/TIA - 250C Medium Haul Standard.
2 One camera to one monitor.
Model No.
LTC 8100
LTC 8200
LTC 8300
Video Inputs (Standard)
8
16
32
Video Inputs (Looping)
8
16
32
Operating Temperature
4°C to 55°C (40°F to 131°F)
Video Inputs (Satellite)
256
256
256
Storage Temperature
–40°C to 60°C (–40°F to 140°F)
Video Outputs
2
5
6
Altitude
4500 m (15,000 ft)
Alarm Inputs
8
16
32
Humidity
0% to 95% relative, non-condensing
Alarm Outputs
2
5
6
LTC 8100, LTC 8200, LTC 8300 Series Bay
Bi-Phase Outputs
8
12
16
Electrical
Keyboards
2
4
4
Model No.
Voltage Range
Nominal Power2
RS-232 Ports (Console)
1
1
1
LTC 8100/90
108 to 253 VAC, 50/60 Hz
15 W
RS-232 Ports (Printer)
0
0
1
LTC 8200/90
108 to 253 VAC, 50/60 Hz
17 W
Receiver/Drivers
(Standard)
8
16
32
LTC 8300/90
108 to 253 VAC, 50/60 Hz
18 W
Receiver/Drivers
(Satellite)
256
Environmental
2 Power at rated voltage fully loaded.
256
256
Connectors
Video Inputs and Monitor Outputs
Electrical
Input Voltage Level
0.5 Vp-p to 2 Vp-p
(Composite Negative Sync)
Gain
Unity ± 2% (75 Ohm terminated)
Pulse/Bar Ratio
Looping Video Connections
LTC 8100 Series
8 BNC
LTC 8200 Series
One 34-pin ribbon connector
used with the LTC 8808/00 video
interconnect panel (not included)
LTC 8300 Series
Two 34-pin ribbon connectors
used with the LTC 8808/00 video
interconnect panel (not included)
94% to 106%
1
2T Pulse K Factor1
2.5% maximum
Bar Amplitude
96% to 106%
Field Time Waveform
Distortion1
2% maximum
Line Time Waveform Distortion1
1% maximum
Short Time Waveform
Distortion1
2% maximum
Video Bandwidth (-3 dB) 2
22 MHz
Frequency Response 2
± 1.0 dB to 10.5 MHz
Signal-to-Noise1
1
BNC
External Accessory Interfaces
CONSOLE
RS-232 port for external PC or control
interface (default = 19,200 baud) 9-pin Dtype connector
ALARMS
Inputs use removable screw terminal
connectors. Relay outputs provide alarm
output connections.
(Contact rating = 1.5 A at 30 VDC)
60 dB at 3.58 MHz unweighted
minimum
(Typical at 3.58 MHz)
PRINTER
(LTC 8300 Series
only)
RS-232 port for system logging printer
(Default = 19,200 baud) 9-pin D-type
connector
Crosstalk (Adjacent Channel)
-52 dB at 3.58 MHz
BIPHASE OUT
Differential Gain1
2% maximum
Multiple ports provide receiver/driver
connections when used in a daisy chain
configuration. Removable screw terminal
connector blocks.
KEYBOARDS
6-pin RS-485 ports for Allegiant keyboard
use
Differential Phase1
1.3° maximum
Chrominance Luminance Gain
96% to 104%
Chrominance Nonlinear Phase1
2° maximum
Luminance Nonlinearity1
4% maximum
1
5 | LTC 8x00/90 Integrated Series Allegiant Matrix/Control Systems
Mechanical
SFT‑INTSRV Integration Server Software
Construction
Steel chassis with sheet metal cover
and plastic bezel
Allegiant integration software package
Finish
Charcoal
Dimensions
LTC 8100, LTC 8200 Series
(H x D x H)
440 x 305 x 40 mm
(17.3 x 12 x 1.7 in.)
LTC 8300 Series
(H x D x H)
440 x 305 x 89 mm
(17.3 x 12 x 3.5 in.)
Weight
• LTC 8100, LTC 8200
Series
4 kg (8.8 lb)
• LTC 8300 Series
4.8 kg (10.7 lb)
Rack Mount (Integral)
Brackets for mounting one unit in a
48 cm (19 in.) EIA rack
• LTC 8100, LTC 8200
Series
One (1) standard rack unit high
• LTC 8300 Series
Two (2) standard rack units high
Accessories
The Allegiant accessory products provide many optional features to the
base Allegiant switching systems. Accessory products include
keyboards, keyboard extension kits, Allegiant Bilinx Data Interface unit,
receiver/driver units, switcher/followers, and code merger units. All
accessory products are designed to be installer-friendly and compatible
throughout the Allegiant series systems. See the Allegiant Accessories
datasheet.
Ordering Information
LTC 8100/90 Allegiant Matrix Switcher
8 camera inputs/2 monitor outputs, incl. Biphase
outputs and alarm contacts, 108 to 253 VAC, 50/60 Hz
Order number LTC 8100/90
LTC 8200/90 Allegiant Matrix Switcher
16 camera inputs/5 monitor outputs, incl. Biphase
outputs and alarm contacts, 108 to 253 VAC, 50/60 Hz
Order number LTC 8200/90
LTC 8300/90 Allegiant Matrix Switcher
32 camera inputs/6 monitor outputs, incl. Biphase
outputs and alarm contacts,108 to 253 VAC, 50/60 Hz
Order number LTC 8300/90
Software Options
SFT-VASA Hybrid IP - Analog/Matrix Video over IP Integration Software
Order number SFT-VASA
LTC 8850/00 GUI Allegiant Single User Software Package
Order number LTC 8850/00
LTC 8059/00 Allegiant Master Control Software
Order number LTC 8059/00
Order number SFT-INTSRV
6 | LTC 8x00/90 Integrated Series Allegiant Matrix/Control Systems
Represented by:
Americas:
Bosch Security Systems, Inc.
130 Perinton Parkway
Fairport, New York, 14450, USA
Phone: +1 800 289 0096
Fax: +1 585 223 9180
security.sales@us.bosch.com
www.boschsecurity.us
Europe, Middle East, Africa:
Bosch Security Systems B.V.
P.O. Box 80002
5617 BA Eindhoven, The Netherlands
Phone: + 31 40 2577 284
Fax: +31 40 2577 330
emea.securitysystems@bosch.com
www.boschsecurity.com
© Bosch Security Systems 2012 | Data subject to change without notice
2363167755 | en, V1, 11. Jun 2012
Asia-Pacific:
Robert Bosch (SEA) Pte Ltd, Security
Systems
11 Bishan Street 21
Singapore 573943
Phone: +65 6571 2808
Fax: +65 6571 2699
apr.securitysystems@bosch.com
www.boschsecurity.asia
China:
America Latina:
Bosch (Shanghai) Security Systems Ltd. Robert Bosch Ltda Security Systems Division
201 Building, No. 333 Fuquan Road
Via Anhanguera, Km 98
North IBP
CEP 13065-900
Changning District, Shanghai
Campinas, Sao Paulo, Brazil
200335 China
Phone: +55 19 2103 2860
Phone +86 21 22181111
Fax: +55 19 2103 2862
Fax: +86 21 22182398
al.securitysystems@bosch.com
www.boschsecurity.com.cn
www.boschsecurity.com
Download PDF