BV AVS.4.12.14045/CC-04 Issuing center: Antwerp Page 1/2 VERITAS Certificate of Conformity To ICAO Annex 14 - Fifth Edition - July 2009 (Standards and recommended practices) To FM Advisory Circular 150/5345-460 To Technical Specification IEC 61827 AENA specification PPT 013-01/07 The undersigned, Rudi Vandenbempt, acting within the scope of the General Conditions of BUREAU VERITAS, certifies herewith the supply of Product: FRC-2-090 Manufactured by ADB bvba in Belgium Application: Runway Centreline Inset Light Was found in conformity with: • The catalogue sheet A.03.252 • The ICAO - Annex 14 - Volume I - §5.3.12 and Appendix 2 Fig.2-7 for light output • The FAA AC 150/5345-46 requirements for L-850A • The IEC TS 61827 • The AENA Specification PPT 013-01/07 Date and place of inspection: 1ih July 2012 and has been, upon request of: ADB bvba. Leuvensesteenweg, 585 B -1930 ZAVENTEM/BELGIUM - inspected in conformity with the applicable requirements of • the catalogue sheets A.03.252 • the ICAO - Annex 14 - Volume I • the FAA AC 150/5345-46 requirements for L-850A • The AENA Specification PPT 013-01/07 & the IEC TS61827 Issued at Antwerp, July 1ih 2012 Rudi Vandenbempt 1 Inspector BUREAU VERITAS ANTWERP Partic· -..n,..<I\iA This certificate is only valid for a period of 3 years from the issuance date, as far as no changes of production process, equipment characteristics nor of applicable requirements occur during this period of validity. BV AVS.4.12.14045/CC-04 Issuing center: Antwerp Page 2/2 VERITAS The following survey operations have been carried out without noticeable remarks: • Attendance to tests at the Laboratory premises of the manufacturer: • Examination of test equipment • Checking of installation of units before testing • Attendance to photometric tests according to the applicable procedures and methods • Statistical test results per IEC 61827 • Test results are detailed in the attached test records, annexed herewith Review of Intertek ETL Certificate of Conformance dated February 17, 2009 and applicable test reports Intertek Reports No: Intertek 3164789CRT-001 CONCLUSION Taking into account the satisfactory results of actual tests and examinations we confirm that the manufacturing and the test results for the above specified units are in conformity with applicable standards, specifications and data sheets. (Details of standards and specifications are indicated on page 1 of this certificate and data sheet as per catalogue). ENCLOSURE Test records of tests which have been attended, duly stamped for identification by . BUREAU VERITAS: Photometric test reports: • Results of intensity values inside the beam • Isocandela curves Issued at Antwerp, July 1ih 2012 Rudi Vandenbempt Inspector BUREAU VERITAS ANTWERP This certificate is only valid for a period of 3 years from the issuance date, as far as no changes of production process, equipment characteristics nor of applicable requirements occur during this period of validity.
* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project