BlueTrek | ORANGE Y2-2 | User manual | BlueTrek ORANGE Y2-2 User manual

BlueTrek ORANGE Y2-2 User manual
O2 blue
Bluetooth wireless headset
User manual
Freephone Customer Contact Details:
Phone Numbers:
United Kingdom
International
Email Address:
support.uk@jabra.com
0800 0327026
00800 722 52272
English
1. Thank you . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
2. About your O2 blue. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
3. What your new headset can do. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
4. Getting started. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
5. Charge your headset. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
6. Instructions for your AC power supply. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
7. Turning your headset on and off. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
8. Pairing it with your phone. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
9. Wear it how you like it. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
10. How to…. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
11. What the lights mean . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
12. Troubleshooting & FAQ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
13. Need more help?. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
14. Taking care of your headset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
15. Protect your hearing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
16. Warranty. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
17. Certification and safety approvals. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
18. Glossary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
1. Thank you
Thank you for purchasing your O2 blue Bluetooth® headset. We hope you
enjoy it! This instruction manual will get you started and ready to make the
most of your headset.
2. About your O2 blue
1 Volume up 4 Charging socket
2 Volume down
5 Optional earhook
3 Light indicater (LED)
Answer/end button
Off/on button
3. What your new headset can do
Your O2 blue lets you do all this:
• Answer calls
• End calls
• Adjust volume level
• Reject calls*
• Voice dialing*
• Last number redialing*
• Call waiting*
• Place call on hold*
* Phone dependent
Specifications
• Talk time up to 8 hrs / standby time up to 300 hrs
• Rechargeable battery with charging option from AC power supply,
USB cable or car charger (USB cable and car charger not included)
• Weight 11 grams
• Operating range up to 10 meters (appr. 33 feet)
• Headset and hands-free Bluetooth profiles (see glossary)
• Bluetooth version 2.0, EDR + eSCO
4. Getting started
You should follow three steps before using your headset
• Charge your headset
• Activate Bluetooth on your mobile phone (refer to the manual for your
Mobile phone)
• Pair your headset to your mobile phone
Your O2 blue is easy to operate. The answer/end button on the headset
performs different functions depending on how long you press it.
Instruction:
Tap
Press
Press and hold
Duration of press
Press briefly
Approx: 1 second
Approx: 5 seconds
5. Charge your headset
Make sure that your headset is fully charged for 2 hours before you start
using it. Use the AC power supply to charge from a power socket. When the
light indicator (LED) has a solid LED light, your headset is charging. When
the solid LED light turns off, it is fully charged. (See fig 2)
fig 2
Use only the charger provided in the box – do not use chargers from any
other devices as this may damage your headset.
Please note: The lifetime of the battery will be significantly reduced
if your device is left uncharged for a long period. We therefore
recommend that you recharge your device at least once a month.
6. Instructions for your AC power supply
Headset can be charged directly from a PC using the USB cable
Socket adapter
Flat charger
USB cable
Unfold socket
adapter
Slide socket
adapter
on to flat
charger
Insert USB cable
7. Turning your headset on and off
• Press the answer/end button until you see a burst of flashes on the
indicator light (LED) to turn on your headset.
• Press and hold the answer/end button until you see a burst of flashes
on the indicator light (LED) to turn the headset off.
Please note that the LED indicator light turns off after 1 minute to save
battery power. The headset is still active, and a light will flash again after you
tap on the Answer/End button or if there is any call activity. To check if the
headset is on, tap the answer/end button once – the LED indicator light will
flash, if the headset is on.
8. Pairing it with your phone
Headsets are connected to phones using a procedure called ‘pairing’. By
following a few simple steps, a phone can be paired with a headset in a
matter of minutes. ( See fig 3)
1. Put the headset in pairing mode
• When you turn on your O2 blue for the first time, the headset will
automatically start up in pairing mode. When the headset is in pairing
mode the LED is constantly lit.
2. Set your Bluetooth phone to ‘discover’ your O2 blue
• Follow your phone’s instruction guide. First make sure Bluetooth is
activated on your mobile phone. Then set your phone to discover the
headset. This usually involves going to a ‘setup,’ ‘connect’ or ‘Bluetooth’
menu on your phone and selecting the option to ‘discover’ or ‘add’ a
Bluetooth device.*
3. Your phone will find your O2 blue
• Your phone will find the headset under name “o2 blue”. Your phone then
asks if you want to pair with the headset. Accept by pressing ‘Yes’ or ‘OK’
on the phone and confirm with the passkey or PIN = 0000 (4 zeros).
Your phone will confirm when pairing is complete.
O2 blue
fig 3
In case of unsuccessful pairing, put your O2 blue into pairing mode
manually. Make sure the headset is off. Press and hold the answer/end
button for approximately 5 seconds until the LED has a constant light.The
LED will flash before the light is constant – keep holding down the button
until the light is constant. (See fig 4)
fig 4
9. Wear it how you like it
Your O2 blue is ready to wear without an earhook – simply insert it in your
right or left ear. If you prefer to use the earhook, attach it as shown on the
illustration. (See fig 5)
fig 5
For optimal performance, wear your O2 blue
and your mobile phone on the same side of
your body or within line of sight. In general,
you will get better performance when there
are no obstructions between your headset
and your mobile phone. (See fig 6)
fig 6
10. How to...
Answer a call
• Tap the answer/end button on your headset to answer a call.
End a call
• Tap the answer/end button to end an active call.
Make a call
• When you make a call from your mobile phone, the call will (subject to
phone settings) automatically transfer to your headset. If your phone
does not support this function, tap the answer/end button on your O2
blue to receive the call through the headset.
Reject a call*
• Press the answer/end button when the phone rings to reject an incoming call. Depending on your phone settings, the person who called
you will either be forwarded to your voice mail or hear a busy signal.
Activate voice dialing*
• Press the answer/end button. For best results, record the voice-dialling
tag through your headset if your phone allows you to do so. Please
consult your phone’s user manual for more information about using
this feature.
Redial last number*
• Double tap the answer/end button.
Adjust sound and volume
• Press the volume up or down (+ or -) to adjust the volume.
Mute/Unmute
• Press the volume up and down (+ or -) at the same time to mute the call
(the caller will not hear your voice. To unmute, press either the volume
up or volume down button.
Call waiting and placing a call on hold*
This lets you put a call on hold during a conversation and answer
a waiting call.
• Press the answer/end button once to put the active call on hold and
answer the waiting call.
• Press the answer/end button to switch between the two calls.
• Tap the answer/end button to end the active conversation.
* Functions marked with * are dependent on your phone supporting these
features. Check your phone’s user manual for further information.
11. What the lights mean
What you see
What is the mean about your headset
Solid light: Slow single flash: Slow double flash: Quick single flash: Quick double flash: Triple flash:
In pairing mode – see Pairing section
Connected to phone and in standby mode*
Not connected to phone and in standby mode
Active on call
Incoming/Outgoing call
Battery low
* O2 blue is equipped with Jabra Discreet Light feature, meaning that
light indicator (LED) turns off after 1 min of non-activity. Headset is still
active, and light will flash again after a tap on the answer/end button
or any call activity.
12. Troubleshooting & FAQ
I hear crackling noises
• For the best audio quality, always wear your headset on the same side
of the body as your mobile phone.
I cannot hear anything in my headset
• Increase the volume on the headset.
• Ensure that the headset is paired with the phone.
• Make sure that the phone is connected to the headset – if it does not
connect either from the phone’s Bluetooth menu or by tapping the
answer/end button, follow the pairing procedure (refer to pairing
section in this user manual).
• You can determine whether your headset is connected to a device by
looking at the flashes on the headset after tapping the answer/end
button when the headset is on: single slow flashes means that the
headset is connected to a device, double slow flashes means that the
headset is currently not connected.
I have connection problems
• You may have deleted your headset connection in your mobile phone.
Follow the pairing instructions; refer to section 8 on page 2 of this
user manual.
• You can determine whether your headset is connected to a device by
looking at the flashes on the headset after tapping the answer/end
button when the headset is on: single slow flashes means that the
headset is connected to a device, double slow flashes means that the
headset is currently not connected.
Will your O2 blue work with other Bluetooth equipment?
• Your O2 blue is designed to work with Bluetooth mobile phones. It
can also work with other Bluetooth devices that are compliant with
Bluetooth version 1.1, 1.2 or 2.0 and support a headset and/or handsfree Bluetooth profile.
I cannot use Reject call, Call on hold, Redial or Voice dialling
• These functions are dependent on your phone supporting them.
Please check your phone’s manual for further details.
13. Need more help?
For Customer Support for your O2 blue call the Jabra support helplines
detailed on the inside front cover.
14. Taking care of your headset
Always store your O2 blue with the power off and safely protected. Avoid
storage at extreme temperatures (above 45°C/113°F – including
direct sunlight – or below -10°C/14°F). This can shorten battery life and
may affect operation.
High temperatures may also degrade performance. If exposed to water or
other liquids, the device should be wiped clean from any traces of water.
15. Protect your hearing
Warnings
Headsets are capable of delivering sounds at loud volumes and high pitched
tones. Exposure to such sounds can result in permanent hearing loss
damage. The volume level may vary based on conditions such as the phone
you are using, its reception and volume settings, and the environment.
Please read the safety guidelines below prior to using this headset.
Safety guidelines
1. Prior to using this product follow these steps:
• before putting on the headset, turn the volume control to its lowest
level,
• put the headset on, and then
• slowly adjust the volume control to a comfortable level.
2. During the use of this product
• Keep the volume at the lowest level possible and avoid using the
headset in noisy environments where you may be inclined to turn up
the volume;
• If increased volume is necessary, adjust the volume control slowly
• If you experience discomfort or ringing in your ears, immediately
discontinue using the headset and consult a physician.
With continued use at high volume, your ears may become accustomed to
the sound level, which may result in permanent damage to your hearing
without any noticeable discomfort.
Using the headset while operating a motor vehicle, motorcycle, watercraft
or bicycle may be dangerous, and is illegal in some jurisdictions. Check your
local laws. Use caution while using your headset when you are engaging
in any activity that requires your full attention. While engaging in any such
activity, removing the headset from your ear or turning off your headset will
keep you from being distracted, so as to avoid accident or injury.
3. Keep out of reach of children:
The plastic bags the product and its parts are wrapped in are not toys for
children. The bags themselves or the many small parts they contain may
cause choking if ingested. Never try to dismantle the product yourself.
None of the internal components can be replaced or repaired by users.
Only authorised dealers or service centres may open the product. If any parts
of your product require replacement for any reason, including normal wear
and tear or breakage, contact your local O2 store.
Avoid exposing the product to rain or other liquids.
Dispose of the product according to local standards and regulations.
www.gnnetcom.com/weee
4. ACA TS028 – Ignition of flammable atmospheres
Do not use the Headset in environments where there is a danger of ignition
of flammable gases.
16. Warranty
Service and Warranty Information
Limited Two (2) - Year Warranty
Warranty is covered by the manufacturer, GN. GN warrants this product to
be free from defects in materials and workmanship (subject to the terms
set forth below) for a period of two (2) years from the date of purchase
(“Warranty Period”). During the Warranty Period, your local O2 store will
liaise directly with GN to repair or replace (at GN’s discretion) this product
or any defective parts (“Warranty Service”). Repair or replacement under
the terms of this warranty does not give right to any extension or a new
beginning of the period of warranty.
10
Claims under the Warranty
To obtain Warranty Service, please contact the local O2 store from which
you purchased this product or visit the manufacturer’s website,
www.jabra.com for further information about customer support. You will
need to return this Product to the O2 store in its original packaging along
with following in order to obtain Warranty Service: (a) the product, and (b)
proof of purchase, which clearly indicates the O2 store name and address,
the date of purchase and the product type, which is evidence that this
product is within the Warranty Period. You will be asked to also include
(c) your return address. (d) daytime telephone number, and (e) reason for
return.
Limitation of Warranty
This warranty is only valid for the original purchaser and will automatically
terminate prior to expiration if this product is sold or otherwise transferred
to another party. The warranty provided by GN in this statement applies
only to products purchased for use, and not for resale. It does not apply
to open box purchases, which are sold “as is” and without any warranty.
Specifically exempt from warranty are limited-life consumable components
subject to normal wear and tear, such as microphone windscreens, ear
cushions, modular plugs, ear tips, decorative finishes, batteries, and other
accessories. This warranty is invalid if the factory-applied serial number, date
code label, or product label has been altered or removed from this product.
This Warranty does not cover cosmetic damage or damage due to misuse,
abuse, negligence, Acts of Nature, accident, disassembling or modification
of, or to any part of, the product. This Warranty does not cover damage due
to improper operation, maintenance or installation, or attempted repair
by anyone other than the manufacturer or a recommended seller who is
authorized to do GN warranty work. Any unauthorized repairs will void this
warranty.
REPAIRS OR REPLACEMENTS AS PROVIDED UNDER THIS WARRANTY ARE
THE EXCLUSIVE REMEDY OF THE CONSUMER. GN SHALL NOT BE LIABLE FOR
ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR BREACH OF ANY
EXPRESS OR IMPLIED WARRANTY ON THIS PRODUCT. EXCEPT TO THE EXTENT
PROHIBITED BY LAW, THIS WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL
OTHER EXPRESS AND IMPLIED WARRANTIES WHAT SO EVER, INCLUDING BUT
NOT LIMITED TO THE WARRANTY OF MERCHANT ABILITY AND FITNESS FOR
A PRACTICAL PURPOSE.
NOTE! This warranty gives you specific legal rights. You may have other rights
which vary from location to location. Some jurisdictions do not allow the
exclusion or limitation of incidental or consequential damages or implied
warranties, so the above exclusions may not apply to you. This warranty
does not affect your legal (statutory) rights under your applicable national
or local laws.
11
17. Certification and safety approvals
CE
This product is CE marked according to the provisions of the R & TTE
Directive (99/5/EC). Hereby, the manufacturer, GN, declares that this
product is in compliance with the essential requirements and other relevant
provisions of Directive 1999/5/EC.
For further information please consult http://www.jabra.com
Within the EU this device is intended to be used in Austria, Belgium, Cyprus,
Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece,
Hungary, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Poland,
Portugal, Slovakia, Slovenia, Spain, Sweden, The Netherlands, United
Kingdom, and within EFTA in Iceland, Norway and Switzerland.
Bluetooth
The Bluetooth® word mark and logos are owned by the Bluetooth SIG, Inc.
and any use of such marks by GN is under license. Other trademarks and
trade names are those of their respective owners.
Type: OTE1
FCC ID: BCE-OTE1
IC: 2386C-OTE1
Guidelines for safe use
Read these guidelines before using your headset.
• Do not drop or try to alter the shape of your headset.
• Do not expose your headset to liquid or moisture.
• Do not expose your headset to extreme temperatures.
Temperature range : 0-40C.
• Do not expose your headset to fire or open flames.
• Do not try to disassemble your headset. Service and Maintenance can
only be performed by authorised dealers.
• Keep your headset away from dust and dirt.
• Do not let children play with your headset, since it contains small parts
that could become detached and create a choking hazard.
• Check the regulation in your area if you plan to use your headset while
driving.
• Turn off your headset before boarding an aeroplane.
Please consider the environment and remember to unplug your flat
charger when you are not charging your headset
12
18. Glossary
Bluetooth is a radio technology that connects devices, such as mobile
phones and headsets, without wires or cords over a short distance (approx.
33 feet).
Bluetooth is safe to use. It is secure too, so once a connection has been
made no-one can listen in and there is no interference from other Bluetooth
devices either. Get more information at www.bluetooth.com
Bluetooth profiles are the different ways that Bluetooth devices
communicate with other devices. Bluetooth phones support the headset
profile, the hands-free profile or both. In order to support a certain profile, a
phone manufacturer must implement certain mandatory features within the
phone’s software.
Pairing creates a unique and encrypted link between two Bluetooth devices
and lets them communicate with each other. Bluetooth devices will not work
if the devices have not been paired.
Passkey or PIN is a code that you enter on your Bluetooth enabled device
(e.g. a mobile phone) to pair it with your O2 blue. This makes your device
and your O2 blue recognize each other and automatically work together.
Standby mode is when your O2 blue is passively waiting for a call. When
you ‘end’ a call on your mobile phone, the headset goes into standby mode.
Dispose of the product according to local standards and regulations.
www.jabra.com/weee
AE0083UX
13
Dispose of the product
according to local
standards and regulations.
www.jabra.com/weee
www.o2blueheadset.com
QD ID B012667
AE0083UX
14
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising