Tripp Lite 1111 West 35th Street Chicago, IL 60609 USA Telephone: +(773) 869 1234 E-mail: email@example.com Model #: SMART2200RMXL2U SmartPro Expandable Rack/Tower UPS System - Intelligent, line-interactive network power management system Highlights 2200VA / 2.2kVA line interactive, extended-run 2U rack / tower UPS Maintains sine-wave 100/110/120V nominal output over an input range of 83 to 145V Network communications supported via HID enabled USB port, DB9 serial port, SNMP/Web card slot and EPO interface Current monitoring and switched PDU control via 3 individually controllable load banks Input: NEMA 5-20P / Output: 4 NEMA 5-15/20R, 4 NEMA 5-15R (120V) 2 year product warranty / $250,000 Ultimate Lifetime Insurance (USA, Puerto Rico & Canada only) Description 2200VA line interactive UPS system for server, network and telecommunications equipment. 2U rackmount or tower form factor with an installed depth of only 19 inches. Expandable battery runtime with optional BP48V24-2U and BP48V60RT-3U external battery packs. Uninterruptible Power Supply (UPS) switches to battery-derived AC output during power failures and extreme voltage variations. Line interactive Automatic Voltage Regulation (AVR) offers two levels of voltage boost during brownouts and one level of voltage cut during overvoltages to maintain regulated 100, 110, 120v selectable output over an input range of 83-145V. Includes NEMA 5-20P input plug and both NEMA 5-15R and 5-15/20R output receptacles. Network-grade AC surge and noise suppression. Network management interfaces support simultaneous communications via USB port, DB9 serial port and SNMPWEBCARD slot. HID-compliant USB interface enables full integration with built-in power management and auto shutdown features of Windows and Mac OS X. Supports simultaneous detailed monitoring of equipment load levels, self-test data and utility power conditions via all 3 network interfaces. Includes PowerAlert monitoring software and complete cabling. Emergency Power Off (EPO) interface. Integrated 3-bank PDU switching supports load shedding and remote-reboot of connected equipment. 3-stage metered current monitoring and battery charge status LEDs. Utility power and voltage regulation LEDs. Audible alarm. Self-test. 4-post rackmount accessories included; 2-9USTAND tower kit and 2POSTRMKITWM two post rack & wallmount accessories available. Field-replaceable, hot-swappable internal batteries and external battery packs. Attractive all-black color scheme. 2-year warranty and $250,000 connected equipment insurance; extended warranty and service contracts available. Package Includes SMART2200RMXL2U UPS system PowerAlert software CD-ROM USB, serial and EPO cabling Owner's manual with warranty information Features SmartPro line interactive UPS system is ideal for voice, data, medical and industrial networking applications Line interactive Automatic Voltage Regulation (AVR) offers two levels of voltage boost during brownouts and one level of voltage cut during overvoltages Maintains continuous operation through blackouts, voltage fluctuations and surges Corrects line voltage conditions as low as 83V and as high as 145 back to selectable 100/110/120V nominal values Standard internal battery set offers 16 minutes at half load (800w) and 6 minutes at full load (1600w) Optional BP48V24-2U and BP48V60RT3U external rack/tower battery packs enable extended runtime operation Compact rackmount form factor installs using only 2 rack spaces (2U) with a maximum installed depth of only 19 inches Ships with all mounting accessories for 4 post rackmount installation Optional 2POSTRMKITWM enables 2 post rackmount or wallmount installation Optional 2-9USTAND accessory enables small-footprint upright tower placement Network interfaces support simultaneous communications via built-in USB, DB9 serial and SNMPWEBCARD slot HID compliant USB interface enables integration with built-in power management and auto shutdown features of Windows and Mac OS X Included PowerAlert UPS monitoring software supports safe unattended shutdown, monitoring and control via local connected servers, with the built-in ability to shutdown any number of additional servers over IP UPS interface supports on-battery, low-battery, power-restored, AC-voltage, DC-voltage, output current monitoring, battery charge current, battery capacity, AC line frequency, timed inverter sutoff, activate self-test, load bank output power control and remote reboot Built-in Emergency Power Off (EPO) interface with cable NEMA 5-20P input plug / NEMA 5-15R & NEMA 5-15/20R output receptacles Integrated 3 bank switched PDU enables remote outlet management for load shedding or remote reboot of individual load banks (Each bank controls 1 outlet per load bank) Front panel LEDs offer current monitoring and battery charge level information UPS ships fully assembled in full compliance with DOT regulations, no time consuming connection of internal batteries by user required 2 year manufacturer's product warranty, $250,000 ULtimate Lifetime Insurance Specifications OUTPUT Output Volt Amp Capacity (VA) 2200 Output kVA capacity (kVA) 2.2 Output Watt Capacity (watts) 1600 Output kW capacity 1.6 Output power factor 0.7 Nominal Output Voltage(s) Supported 100V; 110V; 120V Nominal Voltage details 120V default (voltage selection via back panel dipswitches) Frequency compatibility 50 / 60 Hz Output voltage regulation (line mode) -14%, +6% Output voltage regulation (Battery mode) +/- 5% Built-in UPS output receptacles 4 5-15R outlet(s); 4 5-15/20R outlet(s) Built-in controllable switched load banks Three switchable single-outlet 5-15R load banks Basic PDU options PDU1220 (1U / 13 5-15/20R outlets); PDUNV (1U / 2 C19, 12 C13 outlets); PDUV20 (0U / 12 5-15/20R outlets); PDU40TDUAL (0U / 40 5-15/20R outlets) Metered PDU options PDUMH20 (1U / 13 5-15/20R outlets); PDUMH20AT (1U / 16 5-15/20R outlets)*; PDUMV20 (0U / 16 5-15/20R outlets); PDUMV40 (0U / 32 5-15/20R outlets) Switched PDU options PDUMH20ATNET (1U / 16 5-15/20R outlets)*; PDUMV20NET (0U / 24 5-15/20R outlets) External PDU redundancy options *Auto Transfer Switch features utilizing the secondary PDU input cord are compatible with Smart Online UPS models only Output AC waveform (AC mode) Sine wave Output AC waveform (battery mode) Sine wave INPUT Rated input current (at maximum load) 13.3A (120V), 14.6A (110V), 16.0A (100V) Nominal Input Voltage(s) Supported 120V AC UPS input connection type 5-20P Input circuit breaker 20A UPS Input cord length (ft.) 10 UPS Input cord length (m) 3 Recommended Electrical Service 20A 120V BATTERY Full load runtime (minutes) 6 min. (1600w) Half load runtime (minutes) 16 min. (800w) Expandable battery runtime Extended runtime supported via optional external battery packs External battery pack compatibility BP48V24-2U (limit 1); BP48V60RT3U (multi-pack compatible) DC system voltage (VDC) 48 Battery recharge rate (included batteries) Less than 4.5 hours from 10% to 90% Replacement battery cartridge (internal UPS battery replacement) RBC94-2U Battery Access Front panel battery access door Battery replacement description Hot-swappable, user replaceable batteries VOLTAGE REGULATION Voltage regulation description Automatic voltage regulation (AVR) maintains line power operation with an input voltage range of 79 to 147 Overvoltage correction Voltage reduction of 12% applies when input is between 127 and 145 (120V), 116 and 133 (110V), 106 and 121 (100V) Undervoltage correction Voltage boost of 12% applies when input voltage is between 96 and 108 (120V), 87 and 99 (110V), 83 and 90 (100V) Severe undervoltage correction Voltage boost of 24% applies when input voltage is between 83 and 95 (120V only) LEDS ALARMS & SWITCHES LED Indicators 5 LEDs indicate line power, battery power, overload, voltage regulation and battery low/replace status Alarms Audible alarm indicates power-failure, overload and low-battery conditions Alarm cancel operation Power-fail alarm can be silenced using alarm-cancel switch; once silenced, alarm will re-sound to indicate low-battery status Switches 2 Switches control off/on power status and alarm-cancel/self-test operation; rear panel protected switches support nominal voltage selection SURGE / NOISE SUPPRESSION UPS AC suppression joule rating 570 UPS AC suppression response time Instantaneous EMI / RFI AC noise suppression Yes PHYSICAL Installation form factors supported with included accessories 4 post 19 inch rackmount (mounting rail kit included) Included mounting accessory description Adjustable mounting rail kit included Installation form factors supported with optional accessories 2 post rackmount (2POSTRMKITWM); Wallmount (2POSTRMKITWM); Tower (2-9USTAND) Primary form factor Rackmount UPS / Power Module dimensions in primary form factor (height x width x depth / inches) 3.5 x 17.5 x 19 UPS / Power Module dimensions in primary form factor (height x width x depth / cm) 8.9 x 44.4 x 48.3 Installed whole system total rack space height (rack spaces) 2U Secondary form factor Tower (requires 2-9USTAND) Installed whole system dimensions in secondary form factor (height x width x depth / inches) 17.5 x 3.5 x 19 UPS dimensions in secondary form factor (height x width x depth / cm) 44.4 x 8.9 x 48.3 UPS / Power Module weight (lbs) 64 UPS / Power Module weight (kg) 29.1 UPS Shipping dimensions (height x width x depth / inches) 9 x 23.5 x 20 UPS Shipping dimensions (height x width x depth / cm) 22.9 x 59.7 x 50.8 Shipping weight (lbs) 72 Shipping weight (kg) 32.7 UPS housing material Steel Cooling method Fan ENVIRONMENTAL Operating Temperature Range +32 to +104 degrees Fahrenheit / 0 to +40 degrees Celsius Storage Temperature Range +5 to +122 degrees Fahrenheit / -15 to +50 degrees Celsius Relative Humidity 0 to 95%, non-condensing AC mode BTU / hr. (full load) 168.2 Battery mode BTU / hr. (full load) 604.4 COMMUNICATIONS Communications interface USB (HID enabled); DB9 Serial; EPO (emergency power off); Slot for SNMP/Web interface Network monitoring port description Supports detailed monitoring of UPS and site power conditions PowerAlert software Included Communications cable USB and DB9 cabling included WatchDog compatibility Supports Watchdog application, OS and hard-reboot restart options for remote applications LINE / BATTERY TRANSFER Transfer time 2-4 milliseconds Low voltage transfer to battery power (setpoint) 83 (120V), 87 (110V), 83 (100V) High voltage transfer to battery power (setpoint) 145 (120V), 133 (110V), 121 (100V) SPECIAL FEATURES Grounding lug Back panel grounding lug Cold Start (startup in battery mode during a power failure) Cold-start operation supported High availability UPS features Hot swappable batteries Green & high efficiency features Greater than 95% efficiency - GREEN UPS; Individually controllable load banks CERTIFICATIONS UPS Certifications Tested to UL1778 (USA); Tested to CSA (Canada); Tested to NOM (Mexico); Meets FCC Part 15 Category A (EMI); ROHS (Reduction of Hazardous Substances) WARRANTY Product Warranty Period (U.S., Canada & Puerto Rico) 2 years Connected Equipment Insurance (U.S., Canada & Puerto Rico) $250,000 connected equipment insurance Related Items Optional Products Product Type Related Model Description Qty. Power Distribution PDU1220 Basic PDU / Power Distribution Unit - Safe, reliable power distribution for critical networking equipment - Power Distribution PS7224-20 Tripp Lite Power Strip - Multiple outlets wherever you need them - Tower Stands 2-9USTAND Enables Tower Placement of Rackmount UPS Systems - Rackmount/Wallmount Kits 2POSTRMKITWM Enables 2-Post Rackmount or Wallmount Installation of Select Rackmount UPS Systems - SNMP Accessories SNMPWEBCARD For remote monitoring and control via SNMP, Web, or Telnet. - SNMP Accessories ENVIROSENSE Monitors temperature, humidity and contact-closure inputs. (Requires SNMPWEBCARD or switched PDU.) - USB Hubs/Accessories U022-010 10-ft. USB2.0 A/B Gold Device Cable (A Male to B Male) - Software WATCHDOGSW WatchDog Service Monitoring / Reboot Software - Surge Protectors DTEL2 Network Surge Suppressor - Essential protection for data and communication lines - Surge Protectors DNET1 Network Surge Suppressor - Essential protection for data and communication lines - Extended Warranties WEXT3-2200-3000 3-Year Extended Warranty - For Smart Line-Interactive and Online Tower or Rack models, 2200-3000VA - Extended Warranties WEXT5-2200-3000 5-Year Extended Warranty - For Smart Line-Interactive and Online Tower or Rack models, 2200-3000VA or less - External Battery Packs BP48V60RT-3U External Battery Pack and Cable. 3U, Expandable, Blue 2-Point Connector - External Battery Packs BP48V24-2U BP48V242U - External Battery Pack for UPS System - UPS Accessories MODBUSCARD For remote monitoring and control via MODBUS protocol - More information, including related products, owner's manuals, and additional technical specifications, can be found online at www.tripplite.com/en/products/model.cfm?txtModelID=3264. Copyright © 2010 Tripp Lite. All rights reserved. All trademarks are the sole property of their respective owners. Tripp Lite has a policy of continuous improvement. Specifications are subject to change without notice. Photos may differ slightly from final products.
* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project