GRANDE Series Thermoplastic Combination Unit

GRANDE Series Thermoplastic Combination Unit
Type:
Project/Location:
Contractor:
GRANDE™ Series
Prepared By:
Date:
Thermoplastic
Combination Unit
Model No.:
FEATURES
•One-pack combination of battery unit and Exit Sign, a compact and contemporary
design
•Durable injection-molded thermoplastic housing with push-to-snap design
•Available in single or double face configurations both with means for ceiling mounting
•Comes with the Lumacell® GrandeTM EZ2 canopy and field-selectable snap in/out
chevrons for quick and easy installation
•Exit Sign module illuminated by long-life ALINGAP red LEDs
•Two MR16 halogen lamps, shielded by a clear polycarbonate cover
•Optional MR16 LED lamps with life expectancy 50,000+ hours
•Sealed, maintenance-free, Lead-Calcium or Nickel-Metal-Hydride batteries
•Up to 100W capacity for emergency lights
•Dual voltage input: 120/347VAC or 120/277VAC
•Optional advanced diagnostic circuitry, flasher/buzzer, fire alarm activated flasher
•Optional vandal resistant shield with tamper proof screws
•Certified CSA C22.2 No141
•Certified CSA C860-01
WIRE GUARDS
TYPICAL SPECIFICATIONS
Supply and install the Lumacell® Grande™ Series combination of unit equipment and
Exit Sign. The standard equipment shall operate with a dual voltage input of 120/347VAC.
The unit shall be suitable for wall or ceiling mount. The unit frame and face plates shall
be made of injection-molded durable high-impact thermoplastic and come standard with
snap in/out chevrons. No screws are necessary to hold the faceplate or backplate to
the housing. The one piece thermoplastic frame is molded in white (optional black). The
faceplates shall feature a uniformly illuminated legend. The light source shall be light
emitting diodes (LED) and shall provide illumination in normal and emergency operation
and shall be mounted inside the combination housing. Red LED technology shall be
ALINGAP. An LED-sensitive diffuser shall be mounted behind the legend to provide the
6” high by 3/4” stroke letters with even illumination. The unit shall be equipped with two
emergency heads with tool-less adjustable swivels (lamps of 12W or less) and long-life
MR-16 halogen lamps of ___ V and ___ W. Each lamp shall be protected by a snap-on,
shock-absorbent, transparent polycarbonate cover.
The unit shall be equipped with a test switch and a green pilot light, located on the face
plate above the EXIT legend. The battery charger shall be driven by a micro-controller.
All electronic circuitry (charger, LED driver, LED’s) shall be installed on a single printed
circuit board PCB. The unit equipped with self-testing / self-diagnostic features shall
automatically self test for one minute every 30 days, 10 minutes in the 6th month and 30
minutes annually. When a fault is detected, the bi-color pilot-light shall turn from green
to red and shall flash, identifying the source of the failure: battery, charger circuitry, lamp
load, LED strip. The Exit Sign module shall be CSA-C860 approved.
The combo unit shall be Lumacell® Model:
.
POWER CONSUMPTION
460.0078-L
Wall Mount
DIMENSIONS
MODEL
AC SPECS
Exit Sign
module
Dimensions are approximate and subject to change.
47/8” [12.3 cm]
Less than 2W
2L
5L
120/347VAC
0.11/0.04 A
12H5
111/4” [28.7 cm]
123/8” [31.5 cm]
12L5
17” [43.2 cm]
0.22/0.08 A
12H10
WATTAGE CAPACITY
30MIN 1H 1H30 2H 4H
-
-
-
-
20
15
12
8
-
50
30
24
16
8
50
30
24
16
8
50
36
24
18
9
100
72
48
36
18
IN THE SAME FAMILY: THERMOPLASTIC
33/8” [8.6 cm]
- Grande™ Series Thermoplastic
Exit Unit
- Grande™ Series
Thermoplastic Battery Init
p. 52
p. 108-109
ORDERING INFORMATION
SERIES
FACES/
MOUNTING
# OF
HEADS
HEAD STYLE/
WATTAGE
2L= 6 V-20W LeadCalcium
5L= 6 V-50W LeadCalcium
12L5= 12V-50W
LeadCalcium
12H5= 12V-50W
NiMH
12H10= 12V-100W
NiMH
GRA1= single face
ceiling or wall
mount
GRA2= double face
ceiling mount
GRA1N= single face
wall mount
(less canopy)
GRAU= universal 2
faces backplate
and canopy
Blank= no
heads
2= two heads
LD1= MR16 LED,
6V-4W
LD7= MR16 LED,
12V-4W
LD9= M
R16 LED,
12V-5W
LD10= M
R16 LED,
12V-6W
M6= MR16, 6V-6W
M10= M
R16, 6V or
12V- 10W
M12= 12V-12W, MR16
M20= M
R16, 12V-20W
COLOUR
VOLTAGE
B= black
W= factory
white
2= 120/277VAC
3= 120/347VAC
LEGEND
COLOUR
Blank=red
legend
G= green
legend
OPTIONS
Blank= no options
AT= auto-test
ATN= auto-test (non-audible)
NEX= NEXUS® system interface*
NEXRF= wireless NEXUS® system interface*
BA= brushed aluminum exit stencil
TP= tamper proof screws**
T3= time delay (15 minutes)
VRTP1= polycarbonate shield with tamper
proof screws, single face**
VRTP2= polycarbonate shield with tamper
proof screws, double face**
* Not all options are available with NEXUS®
system. Please consult your sales representative
** 091957-L= t amper-proof bit (sold separately)
** VRTP1 & VRTP2 not available with GRAU
EXAMPLE: 2LGRA22M6W3
www.lumacell.com
59
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement