Datasheet_RFSC
Switching socket RFSC-11, RFSC-61
• The switched socket with 1 output channel is used to control fans, lamps, heaters and appliances, which are
connected by a power cord.
• They can be combined with either Control or System units iNELS RF Control.
• Thanks to the socket design, installation is simple by direct insertion into the existing socket.
• It enables connection of the switched load up to 16A (4.000 W).
• RFSC-11: single-function design - switch on / off.
• RFSC-61: multi-function design – button, impulse relay and time function of delayed ON or OFF with time
setting of 2s-60 min.
• The switched socket may be controlled by up to 32 channels (1 channel represents 1 button on the controller).
• The programming button on the socket is also used for manual control of the output.
• Range up to 200 m (in open space), if the signal is insufficient between the controller and unit, use the signal
repeater RFRP-20.
• Communication frequency with bidirectional protocol iNELS RF Control.
• Produced in 5 designs of sockets and plugs:
Technical parameters
Supply voltage:
Apparent power:
Dissipated power:
Supply voltage tolerance:
Output
Number of contacts:
Rated current:
Switching power:
Peak current:
Switching voltage:
Min. switching power DC:
Mechanical service life:
Electrical service life (AC1):
Control
RF command from the transmitter:
Manual control:
Range in open space:
Other data
Operating temperature:
Working position:
Mounting:
Protection:
Overvoltage category:
Contamination degree:
Dimensions:
Weight:
Related standards:
230 - 250V / 50-60Hz
120 V AC / 60Hz
6 VA
0.7 W
+10 %; -15 %
French
CZ, SK, PL, FR
1x switching (AgSnO2)
16 A / AC1
4000 VA / AC1, 384 W / DC
30 A / <3 s
250 V AC1 / 24 V DC
500 mW
3x107
0.7x105
868 MHz, 915 MHz, 916 MHz
button PROG (ON/OFF)
up to 200 m
Australian
AUS
Schuko
HU, DE, RU, AT, RO
British
GB
US
USA
Function
For more information, see p. 54.
-15 up to + 50 °C
any
plug into a socket
IP 30
III.
2
60 x 120 x 80 mm
195 g
EN 60669, EN 300 220, EN 301 489
R&TTE Directive, Order. No 426/2000 Coll. (Directive 1999/EC)
Device description
Device status
indication
Supply voltage
indication
Program button
29
Switches
Single function RFSA-11B, RFSC-11, RFUS-11
Function button ON/OFF
The output contact closes by pressing one button position, and opens by pressing the other button position.
Multi function RFSA-61B, RFSA-62B, RFSA-61M, RFSA-66M, RFSAI-61B, RFSC-61, RFUS-61
Function 1 - button
Function 2 - switch on
Function 3 - switch off
The output contact will be closed by pressing the button and
opened by releasing the button.
The output contact will be closed by pressing the button.
The output contact will be opened by pressing the button.
Function 4 - impulse relay
Funcion 5 - delayed off
Function 6 - delayed on
The output contact will be switched to the opposite position
by each press of the button. If the contact was closed, it will be
opened and vice versa.
The output contact will be closed by pressing the button and
opened after the set time interval has elapsed.
t = 2s...60min.
The output contact will be opened by pressing the button and
closed after the set time interval has elapsed.
t = 2s...60min.
Loadability products
RFJA-12B; RFSA-62B; RFSA-66M; RFSTI-11/G; RFGSM-220M
Load type
Contact material AgSnO2
Contact 8A
cos φ ≥ 0.95
M
AC1
AC2
250V / 8A
250V / 5A
AC13
AC14
x
cos φ ≥ 0.95
HAL.230V
AC3
AC5a without
compensation
AC5a with compensation
AC5b
AC6a
AC7b
AC12
250V / 4A
x
x
250W
250V / 4A
250V / 1A
250V / 1A
M
M
AC15
DC1
DC3
DC5
DC12
DC13
DC14
250V / 4A
250V / 3A
30V / 8A
24V /3A
30V / 2A
30V / 8A
30V / 2A
x
M
M
K
Load type
Contact material AgSnO2
Contact 8A
M
RFUS-11; RFUS-61
Load type
Contact material AgSnO2
Contact 14A
AC1
AC2
AC3
250V / 14A
250V / 5A
250V / 3A
230V / 3A (690VA)
K
Load type
Contact material AgSnO2
Contact 14A
HAL.230V
AC5a without
compensation
AC5a with compensation
230V / 3A (690VA)
up to max input C=14uF
AC5b
AC6a
AC7b
AC12
1000W
x
250V / 3A
x
M
M
AC13
AC14
AC15
DC1
DC3
DC5
DC12
DC13
DC14
x
250V / 6A
250V / 6A
24V / 10A
24V / 3A
24V / 2A
24V / 6A
24V / 2A
x
AC5b
AC6a
AC7b
AC12
1000W
x
250V / 3A
250V / 10A
RFSA-11B; RFSA-61B; RFSA-61M; RFSTI-11B; RFDAC-71B , RFSC-11, RFSC-61, RFSAI-61B
Load type
Contact material AgSnO2
Contact 16A
cos φ ≥ 0.95
M
54
HAL.230V
AC1
AC2
AC3
AC5a without
compensation
250V / 16A
250V / 5A
250V / 3A
230V / 3A (690VA)
AC5a with compensation
230V / 3A (690VA)
up to max input C=14uF
M
M
AC13
AC14
AC15
DC1
DC3
DC5
DC12
DC13
DC14
x
250V / 6A
250V / 6A
24V 10A
24V /3A
24V /2A
24V / 6A
24V / 2A
x
K
Load type
Contact material AgSnO2
Contact 16A
M
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement