x Permacron Dura Plus 8580

x Permacron Dura Plus 8580
8580
14 V.1
Technical Data Sheet
Permacron® Dura Plus 8580
®
Permacron Dura Plus 8580 is a special reducer containing a drying accelerator for all 2K acrylic products and
1K primer surfacers.
®
®
®
Permacron Dura Plus 8580 shortens the drying times of Permacron and Permasolid Top Coats and Primer
Surfacers.
This produces economies in both working hours and energy cost.
This product is for professional painting of vehicles only.
Technical Data Sheet No. 990.1. Mar. 2014
 2014 Axalta Coating Systems, LLC and all affiliates. All rights reserved.
8580
14 V.1
Used with:
®
®
Permacron and Permasolid Primers and Surfacers
®
®
Permacron and Permasolid 2K Clear Coats 5.
Mixing ratio:
See relevant Technical Data Sheet for product concerned.
®
®
®
Add 5 - 10% Permacron Dura Plus 8580 to Permacron and Permasolid 2K
Clear Coats.
®
®
For Permacron and Permasolid 1K and 2K Primers and Primer Surfacers, see
the appropriate Technical Data Sheet for the quantity of reducer to be added.
Special tips:
®
®
1. The addition of Permacron Dura Plus 8580 shortens the drying time required by Permacron and
®
Permasolid 2K Clear Coats and Surfacers. As an alternative, the drying temperature can be lowered
by 18°F/10°C to 122°F/50°C metal temperature while maintaining the original drying time.
®
®
®
2. With Permacron and Permasolid 2K Clear Coats, the quantity of Permacron Dura Plus 8580
should not exceed 10%. Check Spies Hecker VOC Compliant Product Chart for allowable
amount.
3. Use in low to normal temperatures or any temperature with high humidity (>50%)
®
®
4. Permacron Dura Plus 8580 enhances the through cure when using Permasolid Elastic Additive 9050.
Important Regulatory Information
VOC Category
VOC (ap/le)
Clear Coat Additive
879 g/l, 879 g/l


Gallon
Weight
7.34 lbs/gal
Wt% Volatiles, Water &
Exempts
99.9%, 0.0%, & 0.0%
Vol% Solids
0.0%
For industrial use only by professional, trained painters. Not for sale to or use by the general
public. Before using, read and follow all label and MSDS precautions. If mixed with other
components, mixture will have hazards of all components. Ready to use paint materials
containing isocyanates can cause irritation of the respiratory organs and hypersensitive
reactions. Asthma sufferers, those with allergies and anyone with a history of respiratory
complaints must not be asked to work with products containing isocyanates. Do not sand,
flame cut, braze or weld dry coating without a NIOSH approved air purifying respirator with
particulate filters or appropriate ventilation, and gloves.
Any analytical results set forth herein do not constitute a warranty of specific product features or of the
product’s suitability for a specific purpose. All products are sold pursuant to our general conditions of
sale. We hereby disclaim all warranties and representations, express or implied, with respect to this
product, including any warranty of merchantability or fitness for a particular purpose. This product is
protected by patent law, trademark law, copyright law, international treaties and/or other applicable law.
All rights reserved. Unauthorized sale, manufacturing or use may result in civil and criminal penalties.
SPIES HECKER, INC.
47818 West Anchor Court
Plymouth, MI 48170
Tel. 800-447-7437 (800-44-SPIES)
Fax 734-354-3405
www.SpiesHeckerUSA.com
 2014 Axalta Coating Systems, LLC and all affiliates. All rights reserved.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement