CTE | VL3 FM | Catalog - CTE Digital Broadcast

Catalog - CTE Digital Broadcast
MORE THAN 60 YEARS EXPERIENCE
CTE DIGITAL BROADCAST, with premises in Milan, Reggio Emilia and Bologna, controlled by its share
holding partner MetaSystem was established in 2002. In the March 2008 the following Broadcast
Transmitters companies have been integrated:
ELIT, established in Milano in 1946 and leading the start-up of Television in Italy, in tight cooperation
with the Public corporation RAI (Radiotelevisione Italiana)
TEKO TELECOM, estabilished in 1972 and mainly committed to TV repeaters and TELECOM equipment
CTE BROADCAST, estabilished in 1973 soon becoming an important leader for Radio and TV
Transmitters
The main focus of CTE Digital Broadcast is to emerge
as a major participant in the worldwide radio and
television transition from analogue to digital by
deploying diverse expertise to provide state-of-the
art solutions. Designing and producing our solutions,
“Zero Defect” is the constant goal to set our excellent
quality-price ratio.
By means of significant investments in research and
development CTE Digital Broadcast is able to secure customer satisfaction throughout the Products
entire life. Performance and reliability are kept as main focus of the whole production process,
offering a real value-for-money option to the market. By the effective reorganization of its Product
Area, CTE Digital Broadcast is able to grant total control of purchasing, logistics, production and
testing, thus ensuring a product that meets all aspects of technical specification and fulfils the need
of customers. The Corporate Headquarters is composed by two buildings of 2.800 square meters
placed in Milan-Malpensa Airport area.
The premises in Milan, Reggio Emilia and Bologna include:
More than 8.000 square of factory floor for production and supporting structures
Ultra-modern instrumentation for testing, research and development
Modern and automated machinery for packing and dispatch
Anechoic chambers up to 18GHz
Platforms for vibration test
Equipment for thermal, humidity and fog controls
Equipment for thermal shock testing -40°C+220°C
Products range
New 5:1 DVB/T Dual Cast Agile Digital Transposer and transmitter
FM Transmitters up to 10kW
Antennas, filters, combiners, passive components
Redundant System 1+1 and N+1
HEADQUARTERS
BRANCH OFFICE IN REGGIO EMILIA
C/O CTE INTERNATIONAL SRL
Via R.Sevardi 7
42010 Reggio Emilia
Tel. +39 0522509452
Fax +39 0522509448
info@ctedb.it
www.ctedb.it
MILANO - VARESE
CTE DIGITAL BROADCAST SRL
Via Per Cantalupo 5
21040 Origgio (Va)- Italy
North Milan Malpensa Airport Area
Tel. +39 0296738811
Fax +39 0296738868
info@ctedb.it
www.ctedb.it
MALPENSA AIRPORT
MILANO - COMO - CHIASSO
A8
A9
ORIGGIO
A4
A8
MILANO - TORINO
MILANO - VENEZIA
A4
MILANO
A7
MILANO - GENOVA
A1
MILANO - BOLOGNA
BRANCH OFFICE IN BOLOGNA
C/O TEKO TELECOM
Via Meucci 24/a
40024 Castel San Pietro Terme (Bo)
Tel. +39 0516946853
Fax. +39 051948473
info@ctedb.it
www.ctedb.it
SISTER COMPANIES
ALAN COMMUNICATION JSC
Fortunatoskaya Str. 31A/2
Moscow 105187 Russia
Tel. +7 495 918 0352
Fax. +7 495 918 0832
www.midland.ru
ALAN TELEKOMUNIKACJA Sp.zo.o.
Jawczyce, ul Poznanska 64
05-850 Oiarow Maz Poland
Tel. +22 7223500
Fax. +22 7222995
info@alan.pl
TV EQUIPMENT
Pag. 1 di 7
5 in 1 DVB-T Transmitter & Dual Cast Agile Digital Transposer
The VHF/UHF Dual cast Digital Transposers/
Digital Transmitters set new standards for ATV
and DVB-T transposer and transmitter technology by combining top performance with an
extensive number of features second to none.
The equipment is characterized by the use of
an internal advanced FPGA digital board able
to satisfy all functionalities related to DVBT/H
network. A single equipment can be software configured as a Transmitter, as a regenerative transposer, as a
dual cast (analogue and digital) transposer or as a gap filler with digital echo canceller.
Size and weight have been reduced to obtain a compact unit. The improved performance has been achieved by
means of an advanced approach in the design, focusing on low power consumption and on excellent linearity
over the entire operational band. High reliability is mainly guaranteed by using a limited number of transistors
to achieve a given power target and by using over dimensioned cooling devices: broadcasters can thus reduce
their long term system costs.
The Transmitter performs all the signal processing, from the MPEG-2 TS input to the RF output, completely
meeting the ETSI EN 300 744 and EN 302 304 Standards.
The equipment is used for the radioelectric coverage of small and medium areas. It can be adopted both in
MFN (Multi Frequency Network) or SFN (Single Frequency Network) mode, in DVB-H networks, in hierarchical
or non hierarchical mode with 5/6/7/8 MHz bandwidth.
The Regenerative Transposer is a Dual Cast series CTE DB repeater fitted with the ‘Regenerative’ option. Thanks
to this option the equipment performs a full ‘regeneration’ of the MPEG-2 TS signal, which is completely
demodulated from the input RF signal, processed using the built-in error correction function, and finally
re-transmitted adopting a COFDM spectrum in compliance with the DVB-T standards.
Moreover, the Regenerative Transposer, connected to an external multiplexer equipment, allows drop-insert
operations on the re-transmitted TS signal.
Because of its features, the Regenerative Transposer can be used only with digital signals.
When configured as gap filler, the digital echo canceller function increases the potential output power by
automatically suppressing feedbacks from the transmitting to the receiving antenna.
The echo canceller is furthermore capable of cleaning up the primary input affected by multi path echoes.
The primary benefit of using the echo canceller on a repeater site is, that the system will become stable even
with a positive gain margin (echo level higher than input signal level) allowing more power to be transmitted
from the site. The echo canceller will operate under steady state lab condition with a positive gain margin
approaching 25 dB. The actual improvement of the gain margin for a given site will depend on several site
related condition, but typically an improvement in gain margin in the order of 10-12 dB will be achieved.
Factory & Engineering - Via Per Cantalupo, 5 - 21040 Origgio (VA) - ITALY
Tel. +39 02 96738811 - Fax +39 02 96738868 - info@ctedb.it - www.ctedb.it
5 in 1 DVB-T/H Transmitter & Dual Cast Agile Digital Transposer | TV EQUIPMENT
By using the web-interface management system all the functions can be set and monitored. The RF Signal,
coming from the digital board, is boosted by an internal solid state design power amplifier for optimal
performance in both digital and analogue broadcast applications. The equipment are able to operate in the
frequency band VHF band III and UHF band IV & V.
TV EQUIPMENT
Pag. 2 di 7
5 in 1 DVB-T Transmitter & Dual Cast Agile Digital Transposer
Technical data
RF INPUT
N
Connection
Input impedance
50 ohm
Return Loss
>16dB
Frequency range
30 MHz-1000MHz
Input Level
-60 dBm to -7 dBm
Selectivity
<8dB@max gain (Typ.6.5 dB)
<65dB attenuation outside ±4.2 MHz relative to centre frequency,
depending on selectivity-filter choice
RF OUTPUT
Frequency range
Impedance
VHF Band III and UHF IV&V
50 ohm
AB
Class
Output Power
Spurious emission
Protections
See below specification chart
<-60 dBc with ext. output filter
Overpower, VSWR, Over voltage, Over current, Over Temperature
SMA Female connector RF for forward and reflected power
Probe
Modulation
Load Mismatch
DVB-T/H (transmitters, repeaters & regenerative)
Analogue TV (only repeaters)
1.8:1 typical
For GAP_FILLER Effective output power will depend from antenna separation condition
Factory & Engineering - Via Per Cantalupo, 5 - 21040 Origgio (VA) - ITALY
Tel. +39 02 96738811 - Fax +39 02 96738868 - info@ctedb.it - www.ctedb.it
5 in 1 DVB-T/H Transmitter & Dual Cast Agile Digital Transposer | TV EQUIPMENT
Input noise figure
TV EQUIPMENT
Pag. 3 di 7
5 in 1 DVB-T Transmitter & Dual Cast Agile Digital Transposer
DIGITAL SPECIFICATION
Internal GPS (output with 1PPS and 10MHz input 1PPS and 10 MHz)
Digital with three level selectivity
IF Filter
8, 7, 6, 5 MHz
Band
Precorrection
Digital non-linear precorrection by software :curve Vo/Vi e S21, 256 point,
gain correction up to +12dB, phase correction -6° +30°
Digital linear precorrection by software: amplitude ±10 dB with 0.01 dB step;
group delay ±1000ns step, 21 point 1/20BW resolution
Echo canceller
The size of the “cancelling window” can be configured to 7 μSec for an 8
MHz system bandwidth
E25/100
DRU/DRV
E50/200
DRU/DRV
E10/50
DRU/DRV
E5/20
DRU/DRV
RF output power rms
40W
50W
12.5W
5W
RF output power peak sync
160W
200W
50W
20W
Nf
Nf
Nf
Nf
2U
485x88x500
2U
485x88x500
2U
485x88x500
2U
485x88x500
16
18
16
16
350VA
400VA
200VA
100VA
1
1
1
1
230 Vac± 10%
230 Vac± 10%
230 Vac± 10%
230 Vac± 10%
2
2
2
2
SPECIFICATION
Output Connector
Dimension (WxHxD) mm
Weight
Power consumption @ DVB-T/H
Nr. of power supply boards
DC Power Supply
Number of fans
RTTE STANDARD COMPLIANCE
Frequency Spectrum
EMC
Safety
EN 302 296 – EN302 297
EN 300-489-1 EN 301 489-14
EN 60950 – EN 60215
TEMPERATURE
Operating range
Storage range
Maximum relative Humidity
Max Operating Altitude
-5° to 45°C (Meets ETS 300 019 requirements)
-10° to 80° C
90% non condensing
2500 m.a.s.l.
Factory & Engineering - Via Per Cantalupo, 5 - 21040 Origgio (VA) - ITALY
Tel. +39 02 96738811 - Fax +39 02 96738868 - info@ctedb.it - www.ctedb.it
5 in 1 DVB-T/H Transmitter & Dual Cast Agile Digital Transposer | TV EQUIPMENT
Synchronism Type
TV EQUIPMENT
Pag. 4 di 7
5 in 1 DVB-T Transmitter & Dual Cast Agile Digital Transposer
REMOTE CONTROL
Ethernet WEB Server
LAN RJ45, TCP/IP protocol
SNMP Agent
Version 2
RS232/RS485
DB9 male connector
DB25 female connector
5 in 1 DVB-T/H Transmitter & Dual Cast Agile Digital Transposer | TV EQUIPMENT
Parallel TS & TC
Factory & Engineering - Via Per Cantalupo, 5 - 21040 Origgio (VA) - ITALY
Tel. +39 02 96738811 - Fax +39 02 96738868 - info@ctedb.it - www.ctedb.it
TV EQUIPMENT
Pag. 5 di 7
5 in 1 DVB-T Transmitter & Dual Cast Agile Digital Transposer
Front panel Transmitter
1
2
7
3
4
5
6
8
11
9
10
12
1
2
3
7
4
1. Monitor signals
2. RF Out N Connector
3. Control Panel
4. LAN- Input for LAN connection (Ethernet
standard)
5. Power Line Switch – AC Power switch.
Allows the whole equipment to be switched
on/off
6. RS232
5
6
7. Loc/Rem – For control equipment
modality
8. Input RF signal
9. GPS Antenna input
10. Input 10 MHz and 1ppm reference
signals
11. AUX IF IN
12. IF Out monitor signal
Factory & Engineering - Via Per Cantalupo, 5 - 21040 Origgio (VA) - ITALY
Tel. +39 02 96738811 - Fax +39 02 96738868 - info@ctedb.it - www.ctedb.it
5 in 1 DVB-T/H Transmitter & Dual Cast Agile Digital Transposer | TV EQUIPMENT
Front panel Transposer
TV EQUIPMENT
Pag. 6 di 7
5 in 1 DVB-T Transmitter & Dual Cast Agile Digital Transposer
Rear Panel Transmitter
1
2
3
4
6
5
8
7
9
10
Rear Panel Transposer
1
2
6
3
1. AC Input
2. DC Fuse
3. DC Input
4. Cooling fans
5. GPS Antenna input
8
9
7
6. I/O port for access and remote control
7. RS232/485 for access remote control
8. RS485
9. Interlock
10. ASI signals and reference signals
Factory & Engineering - Via Per Cantalupo, 5 - 21040 Origgio (VA) - ITALY
Tel. +39 02 96738811 - Fax +39 02 96738868 - info@ctedb.it - www.ctedb.it
TV EQUIPMENT | 5 in 1 DVB-T/H Transmitter & Dual Cast Agile Digital Transposer
4
TV EQUIPMENT
Pag. 7 di 7
5 in 1 DVB-T Transmitter & Dual Cast Agile Digital Transposer
TRANSMITTERS
CODE
MODEL
DESCRIPTION
6003545034
E5-DTU
5W UHF DIGITAL AGILE TRANSMITTER
6003545035
E10-DTU
12.5W UHF DIGITAL AGILE TRANSMITTER
6003545036
E25-DTU
40W UHF DIGITAL AGILE TRANSMITTER
6003545044
E50-DTU
50W UHF DIGITAL AGILE TRANSMITTER
6003545039
E5-DTV
5W VHF DIGITAL AGILE TRANSMITTER
6003545040
E10-DTV
12.5W VHF DIGITAL AGILE TRANSMITTER
6003545045
E25-DTV
40W VHF DIGITAL AGILE TRANSMITTER
6003545041
E50-DTV
50W VHF DIGITAL AGILE TRANSMITTER
CODE
MODEL
DESCRIPTION
6002545538
E5/20-DRU
5W/20W UHF DIGITAL AGILE TRANSPOSER
6002545539
E10/50-DRU
12.5W/50W UHF DIGITAL AGILE TRANSPOSER
6002545548
E25/100-DRU
40W/160W UHF DIGITAL AGILE TRANSPOSER
6002545540
E50/200-DRU
50W/200W UHF DIGITAL AGILE TRANSPOSER
6002545543
E5/20-DRV
5W/20W VHF DIGITAL AGILE TRANSPOSER
6002545544
E10/50-DRV
12.5W/50W VHF DIGITAL AGILE TRANSPOSER
6002545549
E25/100-DRV
40W/160W VHF DIGITAL AGILE TRANSPOSER
6002545545
E50/200-DRV
50W/200W VHF DIGITAL AGILE TRANSPOSER
Factory & Engineering - Via Per Cantalupo, 5 - 21040 Origgio (VA) - ITALY
Tel. +39 02 96738811 - Fax +39 02 96738868 - info@ctedb.it - www.ctedb.it
5 in 1 DVB-T/H Transmitter & Dual Cast Agile Digital Transposer | TV EQUIPMENT
REPEATERS
Pag. 1 di 2
DTA 125-250/500 Power Amplifier
TV EQUIPMENT
The DTA 125/500 is an UHF or VHF TV amplifier
designed for dual cast analogue TV / DVB-T operation. The maximum output power is 125Wrms
in DVB-T and 500W ps in Analogue TV .
The DTA 250/500 is the 250Wrms/500Wps
version based on 50V technology. The
maximium output power in digital operation is up to 320Wrms.
The nominal gain is 21 ±0.5 dB (DTA 125/500) and
24 ±0.5 dB (DTA 250/500) for all channels and for the whole temperature range (-5° to +45° C) thanks to the internal compensation circuitry. The nominal driving input level is 1Wrms and 4W ps for both models.
Both
models
are
composed
by
3
blocks
of
pallets,
one
LDMOS
driver
amplifier
and
2
combined
LDMOS
Final
Amplifiers.
The driver amplifier is connected to the inputs of the 2 LD-MOS Final Amplifiers through one, “2 Ways splitter”.
The 2 final amplifier outputs are combined with one combiner. The output of the
hybrid, through a Directional Coupler is connected to the RF output connector.
The Power supply for the amplifiers is a AC/DC Converter single phase. A 5V service power supply is present for control unit. Two blowers cool the amplifiers heatsink while an additional blower cools the power supply. Blowers speed is
contolled by temperature.
Both Amplifier models are allocated into a 4 S.U and 500mm depth cabinet.
Front panel
2
3
4
5
6
7
8
1. Power Line Switch – AC Power switch. Allows
the whole equipment to be switched on/off
2. RF IN
3. Out monitor direct signal
4. Out monitor reflected signal
5. Control Panel
6. Status Led
7. Loc/Rem – For control
equipment modality
8. RS232
Factory & Engineering - Via Per Cantalupo, 5 - 21040 Origgio (VA) - ITALY
Tel. +39 02 96738811 - Fax +39 02 96738868 - info@ctedb.it - www.ctedb.it
DTA 125-250/500 Power Amplifier | TV EQUIPMENT
1
Pag. 2 di 2
DTA 125-250/500 Power Amplifier
TV EQUIPMENT
Rear panel
1
3
4
3. RF Amplifier FAN
4. Power supply FAN
5
6
5. AC input
6. Ground screw
SPECIFICATION
DTA 125-500
DTA 250-500
Band of operation
VHF 174÷230 MHz
UHF 470÷860 MHz
UHF 470÷860 MHz
RF Power Output
500W ps /125 W rms DVB-T
600W ps /320W rms DVB-T
N
Input Connector
Output Connector
7/16
Impedance (OUT)
50Ω
VHF 21dB
UHF 21dB
UHF 21dB
VHF about 1W rms /4W ps
UHF about 1W rms/4W ps
UHF about 1W rms/4W ps
Typical Gain
Input Typical Power
[-5 ÷45]°C
Temperature range of operation
Max Relative humidity
90% non condensing
Dimension
4 S.U.x 485x500mm
Weight
About 26Kg
Supply
230Vac 50 Hz single Phase
1700 VA (black level)
2300 VA
Cooling type
-
Forced air circulation
Remote Control
RS232/485, Parallel, Web Server, SNMP
Max power consumption
CODE
MODEL
DESCRIPTION
6000545051
DTA125-S
125W rms 500W ps UHF Amplifier
6000545052
DTA125-S
125W rms 500W ps VHF Amplifier
6000545053
DTA250-S
320W rms 600W ps UHF Amplifier
Factory & Engineering - Via Per Cantalupo, 5 - 21040 Origgio (VA) - ITALY
Tel. +39 02 96738811 - Fax +39 02 96738868 - info@ctedb.it - www.ctedb.it
DTA 125-250/500 Power Amplifier | TV EQUIPMENT
1. RF Out
2. Data line
2
Pag. 1 di 3
ACU 1+1
TV EQUIPMENT
The ACU models are universal and flexible automatic change-over units designed for controlling FM
radio and television repeaters and transmitters.
ACU 1+1 R includes two RF internal switches in 3 + 4
ports configuration for redundant repeater systems.
ACU 1+1 T includes a 4 ports RF internal switch for
redundant transmitter systems. It can also control
an external high power coaxial relay. Baseband audio and video full passive routing inputs are as well available. In case of breakdown of the main RF signal, the
equipment operates the subsequent switch-over to the auxiliary source, thus ensuring continuity of service.
The internal 4 ports coaxial relay allows switch-over of RF signals up to 750W rms power and frequency up to 1
GHz. By means of the dedicated dB-25 connector located in the rear panel of the unit, it can be matched with
any type of external coaxial relay to control any high-power installations. The unit, which is 100% microprocessor-controlled, allows the software-operated configuration of all operating parameters, such as a low
power threshold, waiting and switching time. The graphic display makes it possible to check the parameter
setting and the operational status of the system. Automatic operating can be deactivated from the front panel
in order to allow the manual control of switching. All base-band routing is made by means of fully passive bistable circuitry in order to grant the signal continuity even in case the changeover unit gets damaged. The unit
features a dual independent mains power system and, as a standard, it is equipped with low voltage DC input
for battery supplied systems.
ACU 1+1 T
ACU 1+1 R
ACU 1+1 U
Video A, Video B
-
-
BNC, 75 Ohm fully
passive routing
Audio stereo
-
-
Left A (main), Left B
(aux), Right A (main),
Right B (aux)
Audio Connector
-
-
standard XLR fully
passive routing
Output connector
N Type Female 50 Ohm
N Type Female 50 Ohm
N Type Female 50 Ohm
Parallel port
Max output power
Serial RS232/RS485
Ethernet TCP/IP
25 pin sub-D connector
750W rms (4 ports switch)
9 pin sub-D connector (selectable by user)
RJ45
Temperature operating range
-5° to 45° C
Maximum relative Humidity
90% non condensing
Dimension (WxHxD) mm
Weight
Power consumption
power supply
DC Power Supply
350W (3 ports switch)
485 x 88 x 490
max 10 kg
50VA
2 power supplies 230 VCA – 50 Hz (6 KV insulation)
24V
Factory & Engineering - Via Per Cantalupo, 5 - 21040 Origgio (VA) - ITALY
Tel. +39 02 96738811 - Fax +39 02 96738868 - info@ctedb.it - www.ctedb.it
ACU 1+1 | TV EQUIPMENT
THECNICAL DATA
Pag. 2 di 3
ACU 1+1
TV EQUIPMENT
Front panel ACU R
1
2
4
3
7
6
9
10
8
Front panel ACU T
6
5
9
10
8
6. Control panel
7. Status LEDs
8. RS232
9. Manual changeover control area
10. RF signals monitoring area (OPTIONAL)
ACU 1+1 | TV EQUIPMENT
1. 3-ports input relay assembly
2. Way A status information
3. Way B status information
4. 4-ports output relay assembly
5. Dummy link N connector
7
Factory & Engineering - Via Per Cantalupo, 5 - 21040 Origgio (VA) - ITALY
Tel. +39 02 96738811 - Fax +39 02 96738868 - info@ctedb.it - www.ctedb.it
Pag. 3 di 3
ACU 1+1
TV EQUIPMENT
Rear Panel ACU
11
11. TX/RTX A e B (DB25 female connector)
12. COAX
13. REMOTE (DB25 female connector)
14. DC Input
14
13
16
15
17
15. DUMMY LOAD (N connector)
16. RS232/485 (DB9 male connector)
17. LAN (RJ45 connector)
MODEL
DESCRIPTION
6001050637
ACU 1+1 T
Automatic changeover FOR TV & FM with 4 ports
switch 750W
6001050638
ACU 1+1 R
Automatic changeover FOR TV & FM with input 3
ports switch and output 4 port switch 750W
6001050640
ACU 1+1 U
Automatic changeover FOR FM & TV with A/V input
and 3 ports switch 350W
6001050641
ACU 1+1 U EXT
Automatic changeover FOR FM & TV with A/V input
(external switch)
6001050642
ACU 1+1 DD
Automatic changeover FOR FM & TV (external switch)
ACU 1+1 | TV EQUIPMENT
CODE
12
Factory & Engineering - Via Per Cantalupo, 5 - 21040 Origgio (VA) - ITALY
Tel. +39 02 96738811 - Fax +39 02 96738868 - info@ctedb.it - www.ctedb.it
Trasmettitori Ripetitori e Gap Filler dual mode TV e DVB-T/H VHF/UHF
La serie
apparati trasmettitori,
ripetitori
e BLD
Transposers
andoutput
GapBLD TVdiTransmitters,
Transposers and
Gap-Fillers
rangeTV
of Transmitters,
equipment, having
1 or 2.5W RF
gap-filler BLD, con potenza di uscita RF 1 o Fillers range of equipment, having 1 or 2.5W
power, has been designed to offer complete DVB-T, DVB-H and DAB B.III signals compatibility.
2,5W, nasce per la piena compatibilità ai se- RF output power, has been designed to offer
gnali digitali DVB-T e DVB-H, nonché DAB complete DVB-T, DVB-H and DAB B.III sigThe equipment is made up of 8 plug-in modules housed
in a 19" - 3U standard rack; each module
BIII.
nals compatibility.
can be replaced by a spare one without changing the overall technical features.
La serie dei ripetitori è completamente dual The equipment is made up of 8 plug-in modmode, vale a dire che può funzionare corret- ules housed in a 19" - 3U standard rack;
All RF circuits are wide band. Easily adjustable 2 and 3 cell filters determine the operating channel.
tamente sia con segnale digitale DVB-T o each module can be replaced by a spare one
Reception
andsegnale
transmission
oscillators
synthesized
and the
L.O. frequencies
can be
programmed
DVB-H
che con
analogico
ATVare
senza
without
changing
the overall
technical
feafrom
the
front
panel.
necessità di alcun intervento da parte tures.
dell‘operatore.
All RF circuits are wide band. Easily adjust-
Two A.G.C.'s are available on the equipment: one controls the receiver and the other one the RF
L’apparato è suddiviso in 8 moduli estraibili e able 2 and 3 cell filters determine the operoutput power.
contenuti
in un rack da 3U 19” standard; ating channel. Reception and transmission
ogni modulo è sostituibile con un altro ugua- oscillators are synthesized and the L.O. freThe test
instrument
for some
parameters and
the signal
LED's
the equipment
le senza
alcuna
modifica
dellebasic
caratteristiche
quencies
can
be make
programmed
from operation
the front
controlglobali.
easier, even during operation.
tecniche
panel.
Tutti i circuiti RF sono a larga banda e filtri a Two A.G.C.'s are available on the equipment:
remote signals
and controls
are available
on multiple
connectorsand
located
on its rear
2 eThe
a 3equipment
celle facilmente
sintonizzabili
deterone controls
the receiver
the other
one
panel.il canale di funzionamento. Gli oscil- the RF output power.
minano
latori di ricezione e trasmissione sono sinte- The test instrument for some basic parametizzati e le frequenze di O.L. sono program- ters and the signal LED's make the equipmabili
dal pannello
La serie
di apparatifrontale.
trasmettitori, ripetitori e gap-filler
BLD,
con potenza
di uscita
RF 1 oeven
2,5W,during
nasce
ment
operation
control
easier,
per la pienasono
compatibilità
segnali
digitali
DVB-H, nonché DAB BIII.
Sull'apparato
previstiaidue
CAG,
uno DVB-T
che eoperation.
controlla il ricevitore e l'altro la potenza RF The equipment remote signals and controls
d'uscita.
La serie dei ripetitori è completamente dual mode,
può on
funzionare
sia con
areovvero
available
multiplecorrettamente
connectors located
digitale
o DVB-H
che con gransegnale analogico
ATV
senza necessità di alcun intervento
Lo segnale
strumento
perDVB-T
la misura
di alcune
on its rear
panel.
da parte
dell`operatore.
dezze
significative
ed i LED di segnalazione
facilitano il controllo del funzionamento
dell'apparato
in esercizio.
L'apparato èanche
suddiviso
in 8 moduli estraibili e contenuti in un rack da 3U 19” standard; ogni modulo
è sostituibile
un altro uguale
alcunaa modifica delle caratteristiche tecniche globali. Tutti i
I telesegnali
e con
telecomandi
per ilsenza
controllo
circuiti RF
sono a larga banda
filtri a 2 e a 3sucelle facilmente sintonizzabili determinano il canale di
distanza
dell'apparato
sono edisponibili
connettori
multipliGliposti
sul pannello
postefunzionamento.
oscillatori
di ricezione
e trasmissione sono sintetizzati e le frequenze di O.L. sono
riore.
programmabili dal pannello frontale.
Sull'apparato sono previsti due CAG, uno che controlla il ricevitore e l'altro la potenza RF d'uscita.
Lo strumento per la misura di alcune grandezze significative ed i LED di segnalazione facilitano il
controllo del funzionamento dell'apparato anche in esercizio. I telesegnali e telecomandi per il
controllo a distanza dell'apparato sono disponibili su connettori multipli posti sul pannello
posteriore.
Dual Mode Transmitters – Translators - Gap Filler
Dual mode ATV and DVB-T/H VHF/UHF Transmitters, Translators and Gap-fillers
ATV DVB-T DVB-H
1
ATV DVB-T DVB-H
Emetteurs, Reemetteurs et gap-filler dual mode ATV et DVB-T DVB-H VHF/UHF
La série BLD d'émetteurs, réémetteurs TV et Gap-Filler, avec puissance de sortie RF de 1 ou 2,5W, a
été projeté pour offrir la complète compatibilité DVB-T / DVB-H et DAB B.III.
La série BLD d'émetteurs, réémetteurs TV et vent être programmées directement sur le
Gap-Filler, avec puissance de sortie RF de 1 ou panneau frontal de l'équipement.
est pour
composé
de la8 modules
logés dans un rack 19 "-3U standard; chaque
2,5W, L'équipement
a été projeté
offrir
complèteplugin,
Deux sans
CAG aucun
sont changement
disponibles des
surcaractéristiques
l'équipement.
module
peut
être
remplacé
avec
un
autre
de
rechange
compatibilité DVB-T / DVB-H et DAB B.III.
L’un qui contrôle le récepteur et l'autre qui
contrôle la puissance de sortie RF.
L'instrument
mesure
les paramètres
et
des filtres àde
2-et
3-cellespour
facilement
réglables
de base et les LED de signalisation d’alarme,
rendent le contrôle de l'équipement plus facile,
même pendant son service. Les télésignaux et
Lescircuits
oscillateurs
et de transmission
synthétisés et les fréquences
L.O. peuvent
Tous les
de de
RFréception
sont à large
bande et sont
les télécommandes
de l'équipement
sont être
disprogrammées
directement
sur
le
panneau
frontal
de
l'équipement.
Deux
CAG
sont
disponibles
sur
des filtres à 2-et 3-celles facilement réglables ponibles sur des connecteurs multiples placés
l'équipement.
déterminent
le canal de fonctionnement. Les sur son panneau arrière.
oscillateurs de réception et de transmission
L'un qui contrôle
récepteur etL.O.
l'autre
qui contrôle la puissance de sortie RF. L'instrument de
sont synthétisés
et lesle fréquences
peu-
mesure pour les paramètres de base et les LED de signalisation d'alarme, rendent le contrôle de
l'équipement plus facile, même pendant son service. Les télésignaux et les télécommandes de
l'équipement sont disponibles sur des connecteurs multiples placés sur son panneau arrière.
Caption of the BLD equipment codes
1
BLD
2
3
4
Where:
1
= input band: (FI = IF ; 3 = band III VHF; 4 = band UHF)
2
= output band: (3 = band III VHF; 4 = band UHF)
3
= U for 1Hz step synthetizer – G for Gap-Filler version
4
Dual Mode Transmitters - Translators - Gap Filler
techniques générales.
L’equipement est composé de 8 modules plugin, logés dans un rack 19 "-3U standard; chaTous les
circuits
de RF sontavec
à large
bande
que module
peut
être remplacé
un autre
déterminent
le
canal
de
fonctionnement.
de rechange sans aucun changement des caractéristiques techniques générales.
= output power: 1 = 1W ; 3 = 2.5W (digital power) - 1=2W; 3= 10W (analog power)
Options:
RX/TX offset
Internal stability
external reference
U
1 Hz
± 0.1ppm/y
10 MHz
G
Input / output same
frequency (only one OL)
± 1ppm/y
5 MHz
ATV DVB-T DVB-H
2
ATV DVB-T DVB-H
BLD ATV Technical characteristics
Basic TV transmitter (common amplification) IF input version
Intermediate frequency input band (standard B/G CCIR).
IF standard Pv 38,9 MHz / Pa 33,4 MHz(NICAM compatible)
Input impedance
50 ohm
Input connector
SMA (f)
Input return loss
³20 dB
Output operating bands TX (on request 47¸88 MHz)
47÷68MHz (VHF B.I) 470÷860MHz (UHF)
174÷230MHz (VHF B.III)
BLD ATV Technical characteristics
CH input version
VHF
UHF
RX operating bands
174÷230MHz (VHF B.III)
470÷860MHz (UHF)
Input impedance
50 Ohm
Input connector
N (f)
Input return loss
³20dB
Noise figure
£6dB
Intermediate frequency input band (standard B/G CCIR)
Other CCIR standard on request M/N D/K I
IF standard Pv 38,9 MHz / Pa 33,4 MHz(NICAM
compatible)
BLD Intermodulation characteristics
VHF
UHF
Intermodulation attenuation with double audio
(Vc -5dB, Sc1 -13dB, Sc2 -20dB, Cc -17 dB referred to Vc
at sync peak)
2W
10W
2W
without linearity precorrector
-54dBc
-53dBc
with internal linearity precorrector
-60dBc
-60dBc-60dBc-60dBc
-60dBc
Out of band intermodulation products
(Vc = nom.; Sc = Vc -10dB reference to Vc -5.5 MHz and
Vc +11MHz)
-60dBc
-60dBc
-54dBc
-54dBc
-60dBc
5W
10W
-56dBc-50dBc
-60dBc
Dual Mode Transmitters - Translators - Gap Filler
Other CCIR standard on request M/N D/K I
ATV DVB-T DVB-H
3
ATV DVB-T DVB-H
BLD ATV Output characteristics
2W
UHF
10W
Output operating bands TX (on request 47÷88 MHz)
174÷230MHz (VHF B.III)
Output impedance
50 ohm
Output connector
N (f)
Output power
0.5 to 2W
A.G.C. efficiency: IF input signal from -20 to +5dBm
(0dBm standard) with video and IF squelch
nom. ±0.5dB
Amplitude frequency response input-output
(from Vc -0.75 MHz to Sc +0.25 MHz)
Group delay (from Vc -0.75 MHz to Sc +0.25 MHz)
<± 1dB
S/N video unweighted (10KHz to 5 MHz)
≥58dB
Audio carrier S/N ratio (dev. ±50 KHz at 400 Hz
40Hz÷15KHz frequency) unweighted
≥60dB
Out of band spurious signals
(except Vc -5.5 and +11MHz refered to Vc at sync peak)
≤-60dBc
Signal to hum (peak value) ratio (f≤10KHc)
≥50dB
Transmitted carrier harmonics (referred to Vc at
synch.peak)
Sync. pulse compression
≤-70dBc
Differential gain (CCIR signal)
≤2%
Differential phase
≤2°
5W
10W
470÷860MHz (UHF)
0.5 to 2W
2.5 to 10W
±30 nS
≤3%
BLDFI3U1
BLDFI3U3
DVB-T/H TRANSMITTER
2.5 to
10W
2W
Dual Mode Transmitters - Translators - Gap Filler
VHF
BLDFI4U1
BLDFI4U3
INPUT/OUTPUT CHARACTERISTICS
Input intermediate center frequency
36MHz ± 2MHz
TX operating band
VHF 170-230MHz
Input impedance
50Ohm
Input connector
SMA
Input return loss
≥ 20dB
Input signal level
-6dBm ±3dB
Output impedance
50Ohm
Output connector
N(f)
Output return loss
≥ 20dB
Shoulder attenuation (with precorrection)
≥ 38dB
M.E.R. (with precorrection)
≥ 35dB
UHF 470860MHz
TRANSMITTER LOCAL OSCILLATOR CHARACTERISTICS
1Hz
TX frequency resolution
1Hz
Phase noise local oscillator
-85dBc/Hz at 100Hz;
-85dBc/Hz at 1KHz (-90dBc/Hz typical);
-95dBc/Hz at10KHz (-100dBc/Hz typical);
Reference oscillator internal:
frequency
stability
frequency adjustment
external input reference
OCXO 10MHz
± 0.1ppm
± 10Hz
10 MHz
ATV, DVB-T/H TRANSMITTER OUTPUT POWER, POWER SUPPLY
AND DIMENSIONS
BLD...1
BLD...3
Output power
Up to 1W DVB, to 2W TV
Up to 2.5W DVB, to 10W
TV
Power supply from MAINS
176 to 264Vca / 48 to 62Hz
Power consumption from MAINS (PF 0.8)
≤ 60VA
Power consumption from MAINS in stand-by mode
≤ 25VA
≤ 145VA
Power supply from BATTERY
± 36 to 63 Vdc
Power consumption from BATTERY
≤ 43W
Power consumption from BATTERY in stand-by mode
≤ 15W
Operating environmental temperature
-5°C to +45°C (or –10°C to +50°C extended range,
with small reversible performances degradation)
Operating environmental RU
Up to 95%
Dimensions
19” 3U rack
Depth
400mm
Weight
about Kg.14
≤ 105W
about Kg.15
ATV DVB-T DVB-H
4
ATV DVB-T DVB-H
DVB-T/H TRANSLATOR “DUAL CAST”
BLD33U1
BLD33U3
BLD33C1
BLD33C3
BLD44U1
BLD44U3
BLD44C1
BLD44C3
INPUT/OUTPUT CHARACTERISTICS (the translator can be equipped with 8 MHz or 7 MHz SAW FILTER)
VHF 170-230MHz
Input impedance
50Ohm
Input connector
N (f)
Input return loss
≥ 20dB
UHF 470-860MHz
Input level range
40 – 77dBµV
Selectivity: QEF reception (BER 2E-4) obtained with
–47dBm input signal level (BW = 8MHz)
-40dB (C/I with CW at -10.75MHz from the center)
-20dB (C/I with CW at -5.448MHz from the center)
-20dB (C/I with CW at +5.25MHz from the center)
3-cell input filter selectivity (reference to the center
frequency of the received channel)
± 8MHz
± 16MHz
>5dB
>20dB
Noise figure (input signal -47dBm)
≤6dB
Input intermediate center frequency
36MHz (BW=8MHz), 36.3MHz (BW=7MHz)
TX operating band
VHF 170-230MHz
Total group delay
≤5µS
Output impedance
50Ohm
Output connector
N(f)
Output return loss
≥ 20dB
Shoulder attenuation (with precorrection)
≥ 38dB
Amplitude frequency response
≤±0.5dB
UHF 470-860MHz
TRANSPOSER LOCAL OSCILLATOR CHARACTERISTICS
RX / TX frequency resolution
1 Hz
Phase noise local oscillator
-85dBc/Hz at 100Hz;
-85dBc/Hz at 1KHz (-90dBc/Hz typical);
-95dBc/Hz at 10KHz (-100dBc/Hz typical);
Reference oscillator internal :
frequency
stability
frequency adjustament
external input reference
1 Hz
500 KHz
OCXO 10MHz
± 0.1ppm
± 10Hz
10 MHz
DVB-T/H TRANSLATOR OUTPUT POWER,
POWER SUPPLY AND DIMENSIONS
BLD...1
BLD...3
Output power
Up to 1W
Up to 2.5W
Power supply from MAINS
176 to 264Vca / 48 to 62Hz
Power consumption from MAINS (PF 0.8)
≤ 60VA
Power consumption from MAINS in stand-by mode
≤ 25VA
Power supply from BATTERY
± 36 to 63 Vdc
≤ 145VA
Power consumption from BATTERY
≤ 43W
Power consumption from BATTERY in stand-by mode
≤ 15W
Operating environmental temperature
-5°C to +45°C (or –10°C to +50°C extended range,
with small reversible performances degradation)
Operating environmental RU
Up to 95%
Dimensions
19” 3U rack
Depth
400mm
Weight
about Kg.15
≤ 105W
about Kg.16
500 KHz
Dual Mode Transmitters - Translators - Gap Filler
RX operating band
ATV DVB-T DVB-H
5
DVB-T/H DAB BIII Gap-Filler (*)
BLD33G1 BLD33G3
BLD44G1 BLD44G3
RX operating band
VHF 170-230MHz
UHF 470-860MHz
Input impedance
50ohm
Input connector
N(f)
Input return loss
>=20dB
Input level range
40-77dBuV
3-cell input filter selectivity (reference to the center
frequency of the received channel)
± 8MHz
± 16MHz
>5dB
>20dB
Noise figure (input signal -47dBm)
<=6dB
IF frequency
36.3MHz (BW=7MHz)
36MHz (BW=8MHz)
Total group delay
≤5µS
≤5µS
TX operating band
VHF 170-230MHz
UHF 470-860MHz
Output impedance
50ohm
Output Connector
N(f)
Output return loss
>=20dB
Shoulder attenuation (with prec..)
>=38dB
Amplitude frequency response
<=+/-0.5dB
LOCAL OSCILLATOR CHARACTERISTICS
RX / TX frequency resolution (at same frequency)
10kHz
Phaise noise noise oscillator
-85dBc/Hz @1kHz
Reference oscillator internal
frequency
stability
frequency adjustament
TCXO 5MHz
± 1ppm
± 15Hz
(*) E’ necessario garantire un isolamento tra l’antenna ricevente e trasmittente di 10dB
superiore al guadagno operativo del gap-filler
(*) The necessary isolation between the RX and TX antenna shall be 10dB higher the
Gap-Filler operative gain.
DVB-T/H Gap-Filler OUTPUT POWER, POWER SUPPLY
AND DIMENSIONS
BLD...1
BLD...3
Output power
Up to 1W
Up to 2.5W
Power supply from MAINS
176 to 264Vca / 48 to 62Hz
Power consumption from MAINS (PF 0.8)
≤ 60VA
Power consumption from MAINS in stand-by mode
≤ 25VA
Power supply from BATTERY
± 36 to 63 Vdc
Power consumption from BATTERY
≤ 43W
Power consumption from BATTERY in stand-by mode
≤ 15W
Operating environmental temperature
-5°C to +45°C (or –10°C to +50°C extended range,
with small reversible performances degradation)
Operating environmental RU
Up to 95%
Dimensions
19” 3U rack
Depth
400mm
Weight
about Kg.15
Teko Telecom SpA
Via dell’industria 5—40068
Tel +39 051 625 61 48 Fax
www.tekotelecom.it
Email info@tekotelecom.it
≤ 145VA
Dual Mode Transmitters - Translators - Gap Filler
ATV DVB-T DVB-H
≤ 105W
about Kg.16
CTE Digital
Broadcast
Srl Bologna Italy
San
Lazzaro
di Savena
+39
051
625 76570
Via Per
Cantalupo
- 21040 Origgio, Varese Italy
Tel +39 051 02 96738811 Fax +39 02 96738868
Web site: www.ctedb.it Email info@ctedb.it
e le caratteristiche
contenuti
questo
catalogo
potranno
connesse
all'evoluzione
prodotti.
Gli apparati
e i esistemi
I datiIedati
le caratteristiche
contenuti in questo catalogo
potrannoinsubire
variazioni
connesse all'evoluzione
dei subire
prodotti. Glivariazioni
apparati e i sistemi
Teko Telecom
sono utilizzabili solodei
in conformità
alle normative,
omologazioni
concessionidescritti
in vigore sono utilizzabili solo in conformità alle
normative,
in informazioni
vigore nei
paesiradioelettrica
di utilizzo.
Su richiesta del cliente la CTE db fornirà informazioni sulla compatibilità radioelettrica e normativa.
nei vari
paesi di utilizzo.omologazioni
Su richiesta del clienteelaconcessioni
Teko Telecom fornirà
sullavari
compatibilità
e normativa.
Characteristics
andindata
contained
in this
datasheet
can the
beproducts
changed
by Teko
theTelecom
manufacturer
products
evolution.
equipment
can only operate in compliance
Characteristics
and data contained
this datasheet
can be changed
by Teko
Telecom following
evolution.
equipment and following
systems can onlythe
operate
in compliance
with the laws,The
certifications
and licencesand
in forcesystems
in
withinthe
licenses
in Teko
force
in the
country
in which
they are intended
be used.
On Customer demand, CTE db will provide information on the electromagnetic
the country
whichlaws,
they arecertifications
intended to be used.and
On Customer
demand,
Telecom
will provide
information
on the electromagnetic
compliancy andtoprovisions
of the law.
compliancy and provisions of the law.
6
DUAL MODE TRANSMITTERS TRANSLATORS GAP FILLER
Ed.05/07
Ripetitore DVB-T DVB-H AGILE
Il ripetitore è un dispositivo che può trovare vaste
applicazioni nella pianificazione e nella realizzazione
di reti di copertura DVB-T/H. Il ripetitore Teko Telecom risponde in modo efficace alle rinnovate esigenze del gestore della rete. La sua caratteristica
principale è l’agilità in frequenza: grazie alla filosofia dei circuiti di conversione down e up e all’assenza di filtri di ingresso e di uscita, il ripetitore può
essere facilmente configurato su altri canali. Grazie
ad un innovativo sistema di rilevazione del tipo di
modulazione, il ripetitore della serie Agile è in grado
di configurarsi automaticamente come ripetitore
analogico o digitale, a seconda del tipo di segnale in
transito. Questa funzionalità permette di gestire al
meglio la fase di transizione dalla diffusione della
TV analogica al digitale terrestre (swichover), nonchè la fase sperimentale. Lo stadio di ingresso opera su tutta la banda 50–860MHz con una dinamica
estesa e una elevata linearità. Le prestazioni ottenute tramite l’implementazione di un filtro IF digitale (Domanda di brevetto BO2004A 000487) consente all’operatore di affrontare in modo efficiente e
dinamico le più severe esigenze di radiocopertura. Il
suo utilizzo riduce il tempo di transito e permette
una precisa ed efficiente regolazione della selettività, mentre l’equalizzatore del ritardo di gruppo e di
ampiezza consente la compensazione delle distorsioni introdotte da filtri di uscita di potenza. Con
potenza di uscita fino a 0,1W (operante su tutta la
banda 50 – 860MHz) e 1W (operante in banda VHF
o UHF) può essere utilizzato per la copertura di
piccole aree o come pilota di amplificatori di potenza. Tutte le sue versioni sono fornite in rack 19 2U,
e il ripetitore è stato progettato in maniera tale da
funzionare in dual mode, con una commutazione tra
il funzionamento DVB-T/H e la TV analogica a mezzo comando locale o remoto. L’apparato, totalmente
gestito con logica a microcontrollore, permette all’utilizzatore un efficiente controllo locale e remoto
dei parametri di funzionamento, tanto da semplificare le attività di installazione e manutenzione. Il
display e la tastiera locale rendono possibile la navigazione nei diversi menù, consentendo il controllo
totale dell’apparato e l’accesso ad un capiente storico degli allarmi. L’accesso remoto è disponibile tramite le interfacce di comunicazione RS485, RS232 e
Ethernet ( WEB server e agente SNMP) per una
semplice integrazione in una moderna rete di supervisione.
The translator is a device that can have wide applications in the design and implementation of DVB-T/
DVB-H coverage networks. Teko Telecom Translator
provides effective solutions to meet the network
operator renewed requirements. Its main feature is
the frequency agility: the Up and Down conversion
circuits philosophy and the input and output filters
absence make the equipment able to be quickly
configured to different channels. Thanks to an innovative system of detection of standard modulation,
the repeater of the Agile series is able to automatically set itself as analogical or digital repeater, according to the type of incoming signal. This functionality allows to easily manage the transitino from
the analogical TV to the digital broadcasting
(swichover), as well as the experimental phases. Its
input stage (covering the whole 50-860 MHz frequency band) with extended dynamic range and
high linearity, combined with the digital IF filter
(Pat.Pend. BO2004A 000487), allows the operator
to efficiently and dynamically handle the most demanding radio coverage requirements. The use of
the digital IF filter reduces the time delay and allows a precise and efficient selectivity adjustment,
while the group and amplitude delay equalizer allows to compensate the distortions introduced by
output power filters. With output power up to 0.1W
(operating on the whole 50-860MHz frequency
band) and 1W (operating in VHF or UHF band), it
can be used for covering small areas or as a driver
for power amplifiers. All configurations are supplied
in a compact 2U 19" rack, and the translator is designed to operate in dual mode, switching on site or
by remote control, between analog TV and DVB-T/H
operating modes. The equipment, fully managed
with micro-controller logic, allows the user an efficient operating parameters local and remote control
and this makes both the installation and maintenance activities simplified. The local display and
keyboard allow the user to navigate all operation
menus with total control over the translator and
access to generously dimensioned alarm history
files. The RS485, RS232 and Ethernet (WEB server
and SNMP agent) remote interfaces make its integration in a modern supervisory network easy.
DVB-T DVB-H Translator
DVB-T DVB-H AGILE Translator
•
•
•
•
•
•
•
•
•
•
•
•
DVB-T DVB-H
Agilità in frequenza
Elevata dinamica di ingresso
Basso ritardo di gruppo
Totalmente supervisionato
Semplicità di installazione
Funzionamento dual mode
(analogico e digitale)
Frequency agility
High performance front-end
Reduced time delay
Fully managed
Easy to install
Dual mode operation (analog
Tv and DVB-T/H)
DVB-T/H TRANSLATOR CHARACTERISTICS (also used for DAB B.III application)
Input connector
N (f) 50 Ohm
Input operating frequency
50 to 860 MHz
≥18dB
Input return loss
Minimum input signal level
-80 dBm
Maximum input signal level
-20 dBm
Input to output delay
2µs approx
Clock reference input connector / frequency / level BNC 50 Ohm / 10 MHz / 0 ÷ –12dBm
Output connector
N (f) 50 Ohm
RF Output power
0.1 Wrms to 1 Wrms (according to version)
≤±0.5dB
Output power stability
≥18dB
Output return loss
Output operating frequencies
50 to 860 MHz (0.1Wrms output power);
VHF band III (1Wrms output power);
UHF (1Wrms output power)
Frequency stability (internal reference)
Channel bandwidth
Noise figure
Amplitude pre-equalization range
Group delay pre-equalization range
M.E.R. with precorrector
Shoulder attenuation with precorrector
Spectral purity @ 10 Hz
Spectral purity @ 100 Hz
Spectral purity @ 1000 Hz
Spectral purity @ 10 kHz
Operating temperature
Operating environment relative humidity
Supply voltage range (nominal)
Power consumption
Cooling system
Dimensions
Weight
Remote Interface
Teko Telecom SpA
Via dell’industria 5—40068
Tel +39 051 625 61 48 Fax
www.tekotelecom.it
Email info@tekotelecom.it
≤0.1 ppm/Year
6, 7, 8 MHz (other BW on request)
≤5 dB
±3 dB
±500 ns
≥35 dB (input MER >40dB)
≥38 dB (input shoulder attenuation ≥48 dB)
≤-65 dBc
≤-85 dBc
≤-85 dBc
≤-95 dBc
-5° C to +45 °C
up to 95%
100 to 240 Vac 50 to 60 Hz
≤125 VA, PF> 0.9
natural ventilation
19" - 2U rack, depth: 475 mm(0.1Wrms) – 534mm (1Wrms)
8kg approx
TC / TS contacts, RS485 – RS232 (web server or SNMP on
request)
DVB-T DVB-H Translator
DVB-T DVB-H
CTE Digital
Broadcast
Srl Bologna Italy
San
Lazzaro
di Savena
+39
051
625 76570
Via Per
Cantalupo
- 21040 Origgio, Varese Italy
Tel +39 051 02 96738811 Fax +39 02 96738868
Web site: www.ctedb.it Email info@ctedb.it
e le caratteristiche contenuti in questo catalogo potranno subire variazioni connesse all'evoluzione dei prodotti. Gli apparati e i sistemi descritti sono utilizzabili solo in conformità alle
I datiI edati
le caratteristiche
contenuti in questo catalogo potranno subire variazioni connesse all'evoluzione dei prodotti. Gli apparati e i sistemi Teko Telecom sono utilizzabili solo in conformità alle normative,
normative, omologazioni e concessioni in vigore nei vari paesi di utilizzo. Su richiesta del cliente la CTE db fornirà informazioni sulla compatibilità radioelettrica e normativa.
omologazioni
e concessioni in vigore nei vari paesi di utilizzo. Su richiesta del cliente la Teko Telecom fornirà informazioni sulla compatibilità radioelettrica e normativa.
Characteristics and data contained in this datasheet can be changed by the manufacturer following the products evolution. The equipment and systems can only operate in compliance
Characteristics
data contained
in this datasheet
can be changed
by Teko
Telecom
followinginthewhich
productsthey
evolution.
Teko Telecomtoequipment
and On
systems
can only operate
in compliance
theprovide
laws, information on the electromagnetic
with theandlaws,
certifications
and licenses
in force
in the
country
are intended
be used.
Customer
demand,
CTE dbwith
will
certifications
and licences
force in the country
in which
compliancy
andinprovisions
of the
law.they are intended to be used. On Customer demand, Teko Telecom will provide information on the electromagnetic compliancy and provisions of the law.
Pag. 1 di 5
TV POWER DIVIDERS
TV ACCESSORIES
All power dividers are characterized by wide
operating frequency ranges in VHF or UHF band,
available for different output powers. They can
be available for different output powers. They
can be supplied with any connector or flange,
according to users requirements and for every
need regarding the number of output. They are
made in aluminum treated under the worst
weather conditions.
2-WAY POWER DIVIDER VHF (175-230 Mhz)
CODE
MODEL
INPUT CONNECTOR
OUTPUT CONNECTOR
MAX INPUT POWER
(dB)
N
400
0000170502
PDV2-S/N 2 ways
0000170528
PDV2-S/N 2 ways
0000170501
PDV2-S/S 2 ways
0000170500
PDV2-F/S 2 ways
7/8
7/16
2000
0000170529
PDV2-Y/F 2 ways
1-5/8
7/8
4000
0000170530
PDV2-Z/Y 2 ways
3-1/8
1-5/8
8000
7/16
N
800
7/16
1000
3-WAY POWER DIVIDER VHF (175-230 Mhz)
MODEL
INPUT CONNECTOR
OUTPUT CONNECTOR
MAX INPUT POWER
(dB)
0000170531
PDV3-S/N 3 ways
7/16
N
1000
0000170532
PDV3-S/S 3 ways
0000170533
PDV3-F/S 3 ways
7/8
7/16
2500
0000170534
PDV3-Y/F 3 ways
1-5/8
7/8
5000
7/16
1000
Factory & Engineering - Via Per Cantalupo, 5 - 21040 Origgio (VA) - ITALY
Tel. +39 02 96738811 - Fax +39 02 96738868 - info@ctedb.it - www.ctedb.it
TV POWER DIVIDERS | TV ACCESSORIES
CODE
Pag. 2 di 5
TV POWER DIVIDERS
TV ACCESSORIES
4-WAY POWER DIVIDER VHF (175-230 Mhz)
MODEL
INPUT CONNECTOR
OUTPUT CONNECTOR
MAX INPUT POWER
(dB)
0000170498
PDV4-S/N 4 ways
7/16
N
1000
0000170526
PDV4-F/S 4 ways
7/8
N
1600
0000170497
PDV4-S/S 4 ways
0000170491
PDV4-F/S 4 ways
0000170519
PDV4-F/F 4 ways
0000170492
PDV4-Y/F 4ways
1-5/8
7/8
5000
0000170520
PDV4-Z/F 4ways
3-1/8
7/8
10000
OUTPUT CONNECTOR
MAX INPUT POWER
(dB)
CODE
7/16
7/8
1000
7/16
2500
7/8
2500
2-WAY POWER DIVIDER UHF (470-860 Mhz)
MODEL
INPUT CONNECTOR
N
400
0000170505
PDU2-N/N 2 ways
0000170535
PDU2-S/N 2 ways
0000170503
PDU2-S/S 2 ways
0000170536
PDU2-F/S 2 ways
0000170504
PDU2-F/F 2 ways
0000170334
PDU2-Y/F 2 ways
1-5/8
7/8
5000
0000170537
PDU2-Z/Y 2 ways
3-1/8
7/8
10000
7/16
N
1000
7/16
7/8
1600
7/16
2500
7/8
2500
3-WAY POWER DIVIDER UHF (470-860 Mhz)
MODEL
INPUT CONNECTOR
OUTPUT CONNECTOR
MAX INPUT POWER
(dB)
0000170506
PDU3-S/N 3 ways
7/16
N
1000
0000170538
PDU3-S/S 3 ways
0000170507
PDU3-F/S 3 ways
7/8
7/16
2500
0000170539
PDU3-Y/F 3 ways
1-5/8
7/8
5000
0000170540
PDU3-Z/Y 3 ways
3-1/8
1-5/8
10000
CODE
7/16
1000
Factory & Engineering - Via Per Cantalupo, 5 - 21040 Origgio (VA) - ITALY
Tel. +39 02 96738811 - Fax +39 02 96738868 - info@ctedb.it - www.ctedb.it
TV POWER DIVIDERS | TV ACCESSORIES
CODE
Pag. 3 di 5
TV POWER DIVIDERS
TV ACCESSORIES
4-WAY POWER DIVIDER UHF (470-860 Mhz)
MODEL
INPUT CONNECTOR
OUTPUT CONNECTOR
MAX INPUT POWER
(dB)
0000170521
PDU4-S/N 4 ways
7/16
N
1000
0000170539
PDU4-S/S 4 ways
0000170389
PDU4-F/S 4 ways
0000170523
PDU4-F/F 4 ways
0002460005
PDU4-Y/F 4ways
1-5/8
7/8
5000
0000170524
PDU4-Z/F 4ways
3-1/8
7/8
10000
0000170525
PDU4-Z/Y 4ways
3-1/8
7/8
10000
7/16
7/8
1000
7/16
2500
7/8
2500
TV POWER DIVIDERS | TV ACCESSORIES
CODE
Factory & Engineering - Via Per Cantalupo, 5 - 21040 Origgio (VA) - ITALY
Tel. +39 02 96738811 - Fax +39 02 96738868 - info@ctedb.it - www.ctedb.it
Pag. 4 di 5
UHF PANEL ANTENNA
TV ACCESSORIES
The UHF directional wide-band antenna PTU is
designed for horizontal or vertical polarization
transmitting TV systems. The antenna is composed of eight half-wave dipoles antenna with
panel reflector and protection radome. The PTU
antenna is suitable for UHF low, medium, and
high power stacked-array systems for directional, semidirectional and omnidirectional patterns. On a back side there is a coaxial antenna
connector 7/16 (N female or EIA 7/8 upon request) . The PTU antenna is supplied with a standard mounting system; a professional mounting
kit is available as an option.
THECNICAL DATA
RF Input power
300-1000-2000 W
Input Connector
N-7/16-7/8
Polarization
Horizontal
Weight
14Kg
Gain (Referred to Half-Wave Dipole)
11dB
H Plane – V Plane
60°-25°
Max Wind Velocity
225 Km/h
Wind Load (with speed at 150Km/h)
89Kg
Frequency Range
470÷860 MHz
Input Impedance
50Ohm
VSWR
≤1.13:1
Internal parts
Silvered-plated trated copper and brass
External parts
Hot galvanize steel
From 60 to 120 mm diam.
Mounting
450x1000x250
Dimension (WxHxD)
MODEL
DESCRIPTION
0000170494
PTU/N
UHF Panel with 8 dipole half wave, N type connector
0000170388
PTU/16
UHF Panel with 8 dipole half wave, 7/16 type connector
on request
PTU/F
UHF Panel with 8 dipole half wave, 7/8 type connector
CODE
Factory & Engineering - Via Per Cantalupo, 5 - 21040 Origgio (VA) - ITALY
Tel. +39 02 96738811 - Fax +39 02 96738868 - info@ctedb.it - www.ctedb.it
UHF PANEL ANTENNA | TV ACCESSORIES
0,65 SQM
Wind Surface
Pag. 5 di 5
VHF III PANEL ANTENNA
TV ACCESSORIES
These VHF directional wide-band aerials, PTV model, are designed for horizontal or vertical polarization in the transmission for
TV and DAB systems. The antenna is composed by two stainless
steel dipoles and a reflecting grid realized with hot dip galvanized steel. The PTV model is suitable for the VHF band and can
operate in low, medium and high power stacked-array systems,
especially for square and round transmitting towers. The PTV
antenna can be disassembled to reduce freighting costs.
RADIATION PATTERN
Frequency: 200 MHz
THECNICAL DATA
RF Input power
1500W
Input Connector
7/16
Vertical (or Horizontal)
Polarization
Weight
25Kg
Gain (Referred to Half-Wave Dipole)
7,5dB
H Plane – V Plane
57°-73°
Max Wind Velocity
225 Km/h
Wind Load (with speed at 150Km/h)
140 Kg
Frequency Range
174÷225 MHz
Input Impedance
50Ohm
VSWR
≤1.4:1
Internal parts
Silvered-plated trated copper and brass
External parts
Stainless steel
From 60 to 120 mm diam.
Mounting
1250x850x400
Dimension (WxHxD)
CODE
MODEL
DESCRIPTION
0000170499
PTV/16
VHF Panel with 2 galvanized steel dipoles, 7/16 type connector
Factory & Engineering - Via Per Cantalupo, 5 - 21040 Origgio (VA) - ITALY
Tel. +39 02 96738811 - Fax +39 02 96738868 - info@ctedb.it - www.ctedb.it
VHF III PANEL ANTENNA | TV ACCESSORIES
0,65 SQM
Wind Surface
SYSTEMS
Pag. 1 di 5
TV SYSTEM AND FM SYSTEM
The Redundant systems are designed to comply with strict requests for a reliable and continuous transmission.
Any of our redundant systems is managed by a change over unit that can be friendly set at any time to match
the specific characteristics of any transmission system. the change over unit is suitable for different matching
and it can be adapted to all our range of products.
TV SYSTEM
CTE Digital Broadcast systems can be set in cabinets of 19” and 600mm deep, the cooling system is frontal air
taking, the equipments stand on guide to permit the autonomous extractability.
Repeater system
The repeater system is managed by the change over unit ACU 1+1 R that allows
the effectively management of the transition from analogue TV to digital DVB-T/H
standard (thanks to the ability to detect the type of input signal in transit to the
repeater and to the configuration versatility of the switching logic).
We can have two type of configurations: pre switch-off and post switch-off.
Pre switch-off:
In the system one transposer works with DVB-T/H signal, the other works with
analogue signal. The system is able to detect the mode of signal received from the
input antenna and consequently it sets the corresponding transposer. The system
can be configured with every type of channel in/out combination and it’s possible
to receive and transmit either to different or to the same channel. During operation, only one transposer will have the useful TV signal, so it will force the change
over unit to commutate its output to the antenna. In pre switch-off configuration
the change-over unit [ACU 1+1 R] works only with the transmission four ports
relay while the input three ports relay (normally used in the 1+1 configuration) is
replaced by a 3 dB hybrid splitter, in this way it is possible to set available simultaneously the input signal to both transposers.
The system is configured in 1+1 redundant mode , both transposers work in DVBT/H mode and one is the reserve for the other. In this mode the redundancy management of transposer is automatic. In this configuration the change-over ACU
1+1 R is configured to work both with transmission four ports coaxial relay and
with input three ports relay.
Factory & Engineering - Via Per Cantalupo, 5 - 21040 Origgio (VA) - ITALY
Tel. +39 02 96738811 - Fax +39 02 96738868 - info@ctedb.it - www.ctedb.it
TV SYSTEM AND FM SYSTEM | SYSTEMS
Post switch-off:
Pag. 2 di 5
TV SYSTEM AND FM SYSTEM
SYSTEMS
Example of Dual Cast 1+1 Repeater System
A-B
E25/100- DRU RTX dual-cast
25Wrms/100Wps UHF regenerative
ACU 1+1 R exchange logic 1+1 repeater
D
Out filter CL6X30B with directional coupler
TV2/MUXA
F
In filter CL6X30B TV2/MUXA
K
Cabinet fan EMB with scoop for TLS and led
power
L
Energy panel 230 Vac (lines A-B), wiring to
equipment and fan
M
GPS 1+1 mod. GPS170-HQ 1+1 16 OUT
N
Monitory panel ASI
P
Rack 19”-44U deep max 700mm
TV SYSTEM AND FM SYSTEM | SYSTEMS
C
Factory & Engineering - Via Per Cantalupo, 5 - 21040 Origgio (VA) - ITALY
Tel. +39 02 96738811 - Fax +39 02 96738868 - info@ctedb.it - www.ctedb.it
Pag. 3 di 5
TV SYSTEM AND FM SYSTEM
SYSTEMS
Transmitter system
The system is composed by two transmitters in 1+1 configuration and one change over unit and works in DVBT/H mode. The output power can be reduced depending on the network need both locally from LCD or by
remote system (web or SNMP). The transmitters are agile in frequency (no manual tuning is needed except
external antenna filters). The transmitter can work in MFN or SFN, in hierarchical and non hierarchical mode.
The logic (change over unit ACU 1+1) permits the commutation of the main transmitter from the antenna to
the dummy load and vice versa, both in automatic and manual mode. The logic detects the transmitter state by
means of the telesignals (parallel port) and controls the RF on/off state of transmitters.
Example digital Transmitter 1+1
E5/10- DRU TX 5Wrms/10Wps UHF
C
ACU 1+1 T exchange logic 1+1 transmitter
with unbalanced 75W load
H
output filter
O
DTA 125U 125Wrms UHF Amplifier
I
Relay panel 7/16
J
Switch ethernet
K
Kit fan EMB with scoop for TLS and led
power
L
Energy panel 230 Vac (lines A-B), wiring to
equipment and fan
M
GPS 1+1 mod. GPS170-HQ 1+1 16 OUT
N
Monitory panel ASI
P
Rack 19”-44U deep max 700mm
Factory & Engineering - Via Per Cantalupo, 5 - 21040 Origgio (VA) - ITALY
Tel. +39 02 96738811 - Fax +39 02 96738868 - info@ctedb.it - www.ctedb.it
TV SYSTEM AND FM SYSTEM | SYSTEMS
A-B
Pag. 4 di 5
TV SYSTEM AND FM SYSTEM
SYSTEMS
FM SYSTEM
The ACS N+1 is a control unit dedicated to transmission equipment and transponder FM / TV. Its main purpose
is to automatically replace the faulty equipment with another equipment with the same features and setting.
This changeover is implemented through the coaxial relays. In systems where the receiver is not provided, the
receivers coaxial relays are replaced with an Audio Matrix to exchange the baseband. the coaxial relay dedicated to the receivers is not terminated with a standard 50 Ohm load, but with an attenuator connected to the
TX1 RF probe that can be used for a testing purposes. This connection does not affect in any way the normal
state of the system because it operates only when the reserve system is on standby.
The advantage of this solution are
1. TX reserve can be test on power even when connected to the dummy load, even remotely.
2. test the RX reserve with a confirm of the TS field even remotely
3. In case of switchover , the faulty receiver on the load can be tested in after setting the correct frequency.
Reset the frequency after the test. The connection is not mandatory and can be removed at any time.
Example System N+1 TRANSPOSER 4+1
The system’s picture used as an example consists of:
1. Input Filter and Splitter: The first block of the system consists of a
compact Splitter Star-point that use a triple cavity filters. This block
are responsible for filtering and splitting the RF Field signal coming
from one or more antennas.
3. Transposer composed by separate Transmitter and Receiver. All
transmitters and receivers used in the system are identical and can
be exchanged between them. This is made possible by the Frequency
Control function available on the TX and RX. Nine Frequency / Power
can be memorized on the TX and restored through a contact closure.
Nine Frequency can be memorized on the RX and restored through a
contact closure. On both TX and RX when no PIN is closed is automatically set the profile “zero”. The Frequency Control function is avaiable
whet the transmitter is set in Remote mode.
4. Logic ACS N+ 1 :The ACS N+1 is the control unit that supervise the
logic states through the TX /RX parallel port and impose all the necessary commands needed for the switchover.
5. Output Combiners : The Output Combiner filters may vary according system configuration. Filters are composed of double, triple or
even quadruple cavity when the channel spacing is 500kHz.
6. AC Mains Line Distribution: The AC Mains Line Distribution is contained in a standard 19” 3U and closed with cover protection. In the
standard configurations, is usually installed at the base of the cabinet
and can be composed until the configuration 6+1. Different models
are provided for systems 30W, 300W and 1000W.
3
3
4
3
3
3
3
1
2
5
6
7. Monitors & RF DIR REF: The RF monitor is usually installed at the
top of the rack with test point for the directional coupler of the Antenna and Dummy Load .
Factory & Engineering - Via Per Cantalupo, 5 - 21040 Origgio (VA) - ITALY
Tel. +39 02 96738811 - Fax +39 02 96738868 - info@ctedb.it - www.ctedb.it
TV SYSTEM AND FM SYSTEM | SYSTEMS
2. Coaxial Relays used for both TX and RX up top 300W are the 4-port
ralay.
Pag. 5 di 5
TV SYSTEM AND FM SYSTEM
SYSTEMS
The Transposer used in this systems consists of a separate transmitter, which varies according the power class,
and a separate FM receiver that remains the same for any system. This approach has the advantage of being
able to migrate from Transposer system to Transmitter system simply removing the Receiver. The connection
between the two devices is mainly of two types, the audio connection and the parallel interface connection.
When the units are inside the rack this connection is made through the card interface. FM receiver is a agile
compact receiver for FM broadcasting band (from 87,5 to 108 MHz) mounted in a 19” standard rack 1U. The
FM system in the Application TRANSPOSER N +1 is connected by an Interface board which acts as an hub for
all the signals coming from the parallel port of the equipment. Thus links together the ACS N +1, equipment
and coaxial relays. It also makes available the TS and TC for the user. All cables used on the rack are PIN to PIN.
GENERAL DESCRIPTION ACS N+1
This NEW Change-Over unit is designed for management
of systems in configurations up to 6+1. By means of
a parallel interface, the Change-Over unit constantly
monitors different receiving/transmitting parameters
of the system, along with the position feedback of the
coaxial switches. The definition of the program to be
used for the reserve equipment, is implicitly set by the
position of the base-band relay switches, and/or by the
received RF figure. To provide both local and remote users with accurate information about the operational
figures of the monitored units, an Ethernet connection is available at the radio reception end in the system.
The local interface is based on graphical touch-screen display, where a clear synoptic view of the monitored
system is available. To deploy the remote control function, RS232, parallel interface, SNMP and WEB server are
available.
SPECIFICATION
Approx less then 50VA
Dimension (WxHxD) mm
485x88x500
Weight
Approx 9.5kg
Nr. of power supply
2
Number of fans
0
Remote control
RS485/Parallel/SNMP/HTTP
Standard compliance
EMC: EN 300-489-1 EN 301-489-14
SAFETY: EN 60950 EN 60215
Operating range
-5/+45°C
Storage range
-10/80°C
Maximum relative humidity
Max operating altitude
90% non condencing
2500m a.s.l.
Factory & Engineering - Via Per Cantalupo, 5 - 21040 Origgio (VA) - ITALY
Tel. +39 02 96738811 - Fax +39 02 96738868 - info@ctedb.it - www.ctedb.it
TV SYSTEM AND FM SYSTEM | SYSTEMS
Power Consumption
Pag. 1 di 2
RX18
FM EQUIPMENT
RX18 is a complete and compact Agile Receiver,
synthesized in FM broadcasting band (from 87,5
to 108 MHz), of new generation, housed in a
standard 19” 1U rack.
The main features are:
No need of calibration – the internal RF auto-accordant circuits of the receiver allow high performances in
the whole band from 87,5 to 108 MHz, with no need of realignment.
Excellent RF characteristics – the high sensitivity and selectivity, the low noise figure and desensitization, as
well as the high rejection of intermodulation, make it ideal for areas with high radio frequency levels.
Easy to use and fast installation – thanks to the innovative control panel, equipped with a large LCD display
and several intuitive menus, the setting can be easily done. Few turns and clicks by the multifunction knob
located on the front panel, and you are ready to operate.
Possibility of local and remote control through the parallel interface.
Easy monitoring of the signals and of the internal voltages. The great number of front and rear connectors
allow collecting signals for a wide variety of applications and measures. Furthermore, the LCD display makes
visible the figure of the internal power supplies voltages and other parameters, for a quick assistance or control
of the operating status.
MPX and MONO output – Suitable both as receiver and receiving section of an FM radio repeater.
Optional Decoder Stereo Board. Possibility to install internally a Stereo Decoder board with “laboratory”
features, capable to make available the left and right channels of the stereo signal to the external, without any
detectable degradation of the characteristics for monitor use or for the local process.
RF Section
From 87,5 to 108 MHz
Frequency
Syntesis step
10KHz
Noise figure
≤ 1≤ 0
Modulation
± 75kHz
N type (50 Ohm)
Antenna connector
Dynamic selectivity (typ)
(Ext. filter recomended)
Δf=300KHz
+10dB
Δf=400KHz
+35dB
Δf=500 KHz
+45dB
Δf=1MHz
+50dB
>45dB
AM suppression
RF Input Level
Sensibility (S/N=60dB)
IF output
From -80dBm to -30dBm (from 10μV to 700mV)
Mono
-87dBm (10 μV)
Stereo
-67dBm (100μV)
dBm
Factory & Engineering - Via Per Cantalupo, 5 - 21040 Origgio (VA) - ITALY
Tel. +39 02 96738811 - Fax +39 02 96738868 - info@ctedb.it - www.ctedb.it
RX18 | FM EQUIPMENT
≥60 (typ 70)
Image frequency suppression
Pag. 2 di 2
RX18
FM EQUIPMENT
MP X/B.F
Audio/MPX out
From -1,5 to +12 with steps of 0,5dB
Audio response
From 20 to 15.000 ±0,1dB
MPX frequency response
From 15 to 15.000 ± 0,1 dB
MPX frequency response
From 20 to 15.000 ±0,1 dB
MPX frequency response
From 15 to 67.000 + 0.1/-0.5dB
Signal to noise ratio
(30÷20000Hz RMS)
Modulation distortion
(@ 1KHz 100% modulation)
Mono
≥77dB (typ 82)
Stereo
≥73dB (typ 75)
Mono
≤0,1 % (typ 82)
Stereo (1 can.)
≤0,30 (Typ 0,20)
Crosstalk stereo
(from 100 to 12000Hz)
-45 dB (typ -50)
Deepmphasis constants
0/25/50/75 μs ±2%
MECHANICAL AND ELECTRICAL SPECIFICATIONS
From 90 to 260 VAC
Supply
Racomanded
From 0 to 35 °C
Max
From 0 to +45 °C
RX18 | FM EQUIPMENT
Operating temperature
From 50 to 60 Hz
Factory & Engineering - Via Per Cantalupo, 5 - 21040 Origgio (VA) - ITALY
Tel. +39 02 96738811 - Fax +39 02 96738868 - info@ctedb.it - www.ctedb.it
Pag. 1 di 5
TX30 & TX300
FM EQUIPMENT
TX30 and TX 300 are new FM driver/transmitters featuring high reliability, ultimate design
solution, friendly use and maintenance, costeffectiveness. Full normal power is guaranteed
in any condition and thanks to the switch mode
ac mains power supply (90 to 260 VAC) these
transmitters can be installed in any country. The
units can be programmed by remote software
(web or GSM modem) or used in a N+1 system
also by means of a new audio interface with automatic input selection and digital AES/EBU.
FREQUENCY
Range
87,5÷108MHz
Setting
10KHz steps ( by KEY BORAD; GSM; WEB)
Setting Accuracy
+/- 50Hz (internal trimmer)
Generation
PLL synthesizer Microprocessor Controlled
Reference
VCTCX0 12.8 MHz
Ref. Stability Vs Temp.
Aging VCTCX0
Frequency Stability
Stability Frequency Deviation
+/- 200Hz @ (-10+50°C); +/- 300Hz @ (-20+70°C)
1ppm @ year
Better than +/- 300Hz over 3 month
± 2,5% over 6 months
RF OUTPUT SPECIFICATION
Harmonics suppression
< -75dBc
Spurious Emission
< -90 dBc
Off lock Attenuation
> 60 dBc
THD
VSWR
Impedance RF
Test Point
< 73 dB (according Limit ETSI EN 302 018)
0,10%
Less than 1,5:1
50 Ohm
a) BNC connector RF -40dBc
b) BNC connector LF (internal MPX)
Factory & Engineering - Via Per Cantalupo, 5 - 21040 Origgio (VA) - ITALY
Tel. +39 02 96738811 - Fax +39 02 96738868 - info@ctedb.it - www.ctedb.it
TX30 & TX300 | FM EQUIPMENT
S/N RATIO
Pag. 2 di 5
TX30 & TX300
FM EQUIPMENT
MONO/MPX SPECIFICATION
Mono/MPX Impedance
600 Ohm / 10 K Ohm
Mono Connector
XLR Balanced
MPX Connector
BNC UN-Balanced
MPX Level
From -6 to +12 dBm ( rear panel ext. trimmer)
Mono Level
0 dBm; +6dBm; adj.(-6 to +12 dBm, rear panel)
Audio Filter Response
THD
>30 dB (from 19KHz to 100 KHz)
<0,2% from 40Hz to 15KHz
>46 dB
Suppression of 19 KHz
RDS Impedance
10 K Ohm unbalance ., BNC Connector (with 30 HZ to 100 KHz Filter)
STEREO SPECIFICATION
Left and right impedance
Left, right level
Crosstalk
THD on Encoded channels
600 ohm/10 KOhm. XLRf Connector
0 dBm; +6dBm;
adj.(-6 to +12 dBm, rear panel)
>50 dB (@ 19KHz)
<0,3% from 0,4 Hz to 15 KHz
>50 dB
Suppression of 38KHz
Spurious suppression outside
band
According to Limit ETSI EN 302 018
Internal cristal
Sub Carrier Generation
19KHz ±1Hz
Pilot Frequency
DESIGN DATA
Pre-emphasis
Audio Frequency Response
Unbalance rejection
Solid state direct FM frequency
Flat or 75 or 50μs
± 0,2 dB (from 40Hz to 10KHz) (stereo)
±0,3 dB (from 40 Hz to 100 KHz) (MPX)
>40 dB
Modulation
Type: Direct VCO frequency modulation F3E/F8E
Capability: Meets or exceeds all CE99/05 R&TTE Requirements
Digital Input
AES/EBU
Factory & Engineering - Via Per Cantalupo, 5 - 21040 Origgio (VA) - ITALY
Tel. +39 02 96738811 - Fax +39 02 96738868 - info@ctedb.it - www.ctedb.it
TX30 & TX300 | FM EQUIPMENT
Type
Pag. 3 di 5
TX30 & TX300
FM EQUIPMENT
SPECIFICATION
TX30
TX300
RF output power
From 0 to 30W
From 300W
Output Connector
N type female
N type female
2U
482x88x410
2U
482x88x480
7 Kg
10 Kg
<100 W
<550 W
0.70
0.99
Power supply req.
From 80 to 265 Vac. Single phase
From 80 to 265 Vac. Single phase
Type of ventilation
1 blower 28 VDC
2 blowers 28 VDC
Dimension
(WxHxD) mm
Weight
Power Consumption
Power Factor
TEMPERATURE
0° to 45°C
Operating range
Storage range
Maximum relative Humidity
Max Operating Altitude
-40° to 60° C
90% non condensing
2500 mt.a.s.l.
STANDARD COMPLIANCE
Conformity
Directive 99/5/CE
Radio Spectrum
ETS 302 018-2 V1.2.1
EMC
ETS 301 489-11 V1.3.1
Safety
EN 60215:1989; EN 60215/A1:1992-07; EN 60215/A2:1994-09;
LAN
Web Browser by TCP/IP
SNMP Protocol (RJ45)
RS232
Software Remote Controller by GSM Modem (DB9f)
RS485
Internal BUS connection for system connectivity
(DB9 in&out)
Parallel TS & TC
Parallel Frequency Set
2 x DB15 A I/O
9 preset frequency activate by TC (DB15 Connector)
Factory & Engineering - Via Per Cantalupo, 5 - 21040 Origgio (VA) - ITALY
Tel. +39 02 96738811 - Fax +39 02 96738868 - info@ctedb.it - www.ctedb.it
TX30 & TX300 | FM EQUIPMENT
REMOTE CONTROL
Pag. 4 di 5
TX30 & TX300
FM EQUIPMENT
FRONT PANEL
1
2
3
4
1. RS232 - Usable for software update
2. Status Leds
3. Control Panel
5
4. LF Monitor
5. FWD Monitor
REAR PANEL 30W
11
7
8
9
6
10
13
14
12
16
15
6. MPX – input 1 for external RDS/SCA signal
7. SCA- input 1 for external mpx signal
8. Remote control
9. LAN – Ethernet standard
10. FREQUENCY CONTROL
11. RS485
12. External Input
13. Antenna N female output connector
14. Cooling
15. Power line plug-in FUSE
16. Power line Switch
Factory & Engineering - Via Per Cantalupo, 5 - 21040 Origgio (VA) - ITALY
Tel. +39 02 96738811 - Fax +39 02 96738868 - info@ctedb.it - www.ctedb.it
TX30 & TX300 | FM EQUIPMENT
REAR PANEL 300W
Pag. 5 di 5
TX30 & TX300
FM EQUIPMENT
MODEL
DESCRIPTION
OPTIONS
6003545048
TX30
30W Stereo, Mono MPX FM Transmitter
Option A
6003545049
TX30
30W Stereo, Mono MPX FM Transmitter
Option A+B
6003545050
TX30
30W Stereo, Mono MPX FM Transmitter
Option A+C
6003545051
TX30
30W Stereo, Mono MPX FM Transmitter
Option A+B+C
6003545052
TX300
300W Stereo, Mono MPX FM Transmitter
Option A
6003545053
TX300
300W Stereo, Mono MPX FM Transmitter
Option A+B
6003545054
TX300
300W Stereo, Mono MPX FM Transmitter
Option A+C
6003545055
TX300
300W Stereo, Mono MPX FM Transmitter
Option A+B+C
OPTION A:
OPTION B:
OPTION C:
Remote Control (TCP/IP; SNMP; RS232)
Built in Digital AES/EBU Decoder
DB25 Parallel port expansion for 1+1, N+1 system, ext C.U.
TX30 & TX300 | FM EQUIPMENT
CODE
Factory & Engineering - Via Per Cantalupo, 5 - 21040 Origgio (VA) - ITALY
Tel. +39 02 96738811 - Fax +39 02 96738868 - info@ctedb.it - www.ctedb.it
Pag. 1 di 5
TX1 - TX05 & VL1 - VL05
FM EQUIPMENT
The TX 1 and TX 5 are really innovative FM
Transmitters with 1000W and 500W output power respectively. Thanks to the new solutions
that our engineers have implemented in the
circuitry and to the compact design, for these
transmitters we have estimated a 20% longer
MTBF with respect to the average similar models available in the market. The TX 1 and TX 5
are equipped with a microprocessor board that
allows the programming locally or remotely by
web (SNMP protocol). Thanks to the ultimate
electronic components that have been largely
implemented in the design, the overall specifications now achieved, set TX1 and TX 05 as “top
class equipment”.
FREQUENCY
Range
87,5÷108MHz
Setting
10KHz steps ( by KEY BORAD; GSM; WEB)
Setting Accuracy
+/- 50Hz (internal trimmer)
Generation
PLL synthesizer Microprocessor Controlled
Reference
VCTCX0 12.8 MHz
Ref. Stability Vs Temp.
Aging VCTCX0
Frequency Stability
Stability Frequency Deviation
+/- 200Hz @ (-10+50°C); +/- 300Hz @ (-20+70°C)
1ppm @ year
Better than +/- 300Hz over 3 month
± 2,5% over 6 months
Harmonics suppression
< -75dBc
Spurious Emission
< -90 dBc
Off lock Attenuation
> 60 dBc
S/N RATIO
THD
VSWR
Impedance RF
Test Point
< 73 dB (according Limit ETSI EN 302 018)
0,10%
Less than 1,5:1
50 Ohm
a) BNC connector RF -40dBc
b) BNC connector LF (internal MPX)
Factory & Engineering - Via Per Cantalupo, 5 - 21040 Origgio (VA) - ITALY
Tel. +39 02 96738811 - Fax +39 02 96738868 - info@ctedb.it - www.ctedb.it
TX1 - TX05 & VL1 - VL05 | FM EQUIPMENT
RF OUTPUT SPECIFICATION
Pag. 2 di 5
TX1 - TX05 & VL1 - VL05
FM EQUIPMENT
MONO/MPX SPECIFICATION
Mono/MPX Impedance
600 Ohm / 10 K Ohm
Mono Connector
XLR Balanced
MPX Connector
BNC UN-Balanced
MPX Level
From -6 to +12 dBm ( rear panel ext. trimmer)
Mono Level
0 dBm; +6dBm; adj.(-6 to +12 dBm, rear panel)
Audio Filter Response
THD
>30 dB (from 19KHz to 100 KHz)
<0,2% from 40Hz to 15KHz
>46 dB
Suppression of 19 KHz
RDS Impedance
10 K Ohm unbalance ., BNC Connector (with 30 HZ to 100 KHz Filter
STEREO SPECIFICATION
Left, right level
Crosstalk
THD on Encoded channels
600 ohm/10 KOhm. XLRf Connector
0 dBm; +6dBm;
adj.(-6 to +12 dBm, rear panel)
>50 dB (@ 19KHz)
<0,3% from 0,4 Hz to 15 KHz
>50 dB
Suppression of 38KHz
Spurious suppression outside
band
According to Limit ETSI EN 302 018)
Internal cristal
Sub Carrier Generation
19KHz ±1Hz
Pilot Frequency
DESIGN DATA
Type
Pre-emphasis
Audio Frequency Response
Unbalance rejection
Solid state direct FM frequency
Flat or 75 or 50μs
± 0,2 dB (from 40Hz to 10KHz) (stereo)
±0,3 dB (from 40 Hz to 100 KHz) (MPX)
>40 dB
Modulation
Type: Direct VCO frequency modulation F3E/F8E
Capability: Meets or exceeds all CE99/05 R&TTE Requirements
Digital Input
AES/EBU
Factory & Engineering - Via Per Cantalupo, 5 - 21040 Origgio (VA) - ITALY
Tel. +39 02 96738811 - Fax +39 02 96738868 - info@ctedb.it - www.ctedb.it
TX1 - TX05 & VL1 - VL05 | FM EQUIPMENT
Left and right impedance
Pag. 3 di 5
TX1 - TX05 & VL1 - VL05
FM EQUIPMENT
SPECIFICATION
TX1/ VL1
TX 05/VL 05
RF output power
From 100 to 1000W
From 50 to 500W
Output Connector
7/16 type female
7/16 type female
3U
482x132x700
3U
482x132x700
Weight
22/21 Kg
21/20 Kg
Power Consumption
1700 W
900 W
0.97
0.99
230 Vac. ± 15% Single phase
230 Vac. ± 15% Single phase
2 blower 26V DC
2 blowers 26V DC
Dimension
(WxHxD) mm
Power Factor
Nr. of power supply boards
Type of ventilation
TEMPERATURE
0° to 45°C
Operating range
Storage range
Maximum relative Humidity
Max Operating Altitude
-40° to 60° C
90% non condensing
2500 mt.a.s.l.
STANDARD COMPLIANCE
Directive 99/5/CE
Radio Spectrum
ETS 302 018-2 V1.2.1
EMC
ETS 301 489-11 V1.3.1
Safety
EN 60215:1989; EN 60215/A1:1992-07; EN 60215/A2:1994-09;
REMOTE CONTROL
LAN
Web Browser by TCP/IP
SNMP Protocol (RJ45)
RS232
Software Remote Controller by GSM Modem (DB9f)
RS485
Internal BUS connection for system connectivity
(DB9 in&out)
Parallel TS & TC
Parallel Frequency Set
2 x DB15 A I/O
9 preset frequency activate by TC (DB15 Connector)
Factory & Engineering - Via Per Cantalupo, 5 - 21040 Origgio (VA) - ITALY
Tel. +39 02 96738811 - Fax +39 02 96738868 - info@ctedb.it - www.ctedb.it
TX1 - TX05 & VL1 - VL05 | FM EQUIPMENT
Conformity
Pag. 4 di 5
TX1 - TX05 & VL1 - VL05
FM EQUIPMENT
FRONT PANEL TX1 - TX05
1
2
3
4
1. RS 232 PC Connection
2. Status Led
3. Control Panel
4. FWD Monitor
REAR PANEL TX1 - TX05
7
8
9
6
10
11
12
13
9
5. RS485 Serial port
6. Modulation connection area
7. Remote control DB15 Female
8. input for LAN connection
9. Cooling fans
10. Power line plug in with fuse
11. Auxiliary AC output power
12. AC power switch
13. RF output 1000W
Factory & Engineering - Via Per Cantalupo, 5 - 21040 Origgio (VA) - ITALY
Tel. +39 02 96738811 - Fax +39 02 96738868 - info@ctedb.it - www.ctedb.it
TX1 - TX05 & VL1 - VL05 | FM EQUIPMENT
5
Pag. 5 di 5
TX1 - TX05 & VL1 - VL05
FM EQUIPMENT
MODEL
DESCRIPTION
6003545060
TX05 Option A
500W Stereo,Mono, MPX FM Transmitter
6003545061
TX05 Option A+B
500W Stereo,Mono, MPX FM Transmitter
6003545062
TX05 Option A+C
500W Stereo,Mono, MPX FM Transmitter
6003545063
TX05 Option A+B+C
500W Stereo,Mono, MPX FM Transmitter
6003545056
TX1 Option A
1000W Stereo,Mono, MPX FM Transmitter
6003545057
TX1 Option A+B
1000W Stereo,Mono, MPX FM Transmitter
6003545058
TX1 Option A+C
1000W Stereo,Mono, MPX FM Transmitter
6003545059
TX1 Option A+B+C
1000W Stereo,Mono, MPX FM Transmitter
6000545055
VL 05 Option A
500W Power Amplifier 87.5-108MHz
6000545054
VL 1 Option A
1KW Power Amplifier 87.5-108MHz
OPTION A:
OPTION B:
OPTION C:
Remote Control (TCP/IP; SNMP, RS232)
Built in Digital AES/EBU Decoder
DB25 paralel port expansion for 1+1, N+1 system, ext C.U
TX1 - TX05 & VL1 - VL05 | FM EQUIPMENT
CODE
Factory & Engineering - Via Per Cantalupo, 5 - 21040 Origgio (VA) - ITALY
Tel. +39 02 96738811 - Fax +39 02 96738868 - info@ctedb.it - www.ctedb.it
Pag. 1 di 3
VL3 - VL5 - VL10
FM EQUIPMENT
This innovative and compact amplifier is able to satisfy the
strictest request of all end-users who are looking for high reliable and top quality equipment at competitive prices. All the
declared operational parameters are assured in the entire
frequency range and for extreme environmental conditions.
By means of the advance approach in the design focused on
low power consumption and linearity over the entire operative band, we estimate a 20% longer MTBF with respect to the
average standard equipment available in the market.
VL3
VL5-VL10
87,5÷108 MHz
Range
Better than 58%
Overall efficiency
50ohm input and output
Impedance RF connector
Output power stability
±3%
Harmonics suppression
≥-80 dBc (typically better than 90 dBc)
Spurious emission
< according Limit ETSI EN 302 018
Residual Asynchrony AM
-74 dB Weighed
Residual Synchrony AM
-58 dB Weighed
BNC connector RF -60 dBc
Probe
Protections
Programmable logic protection
Logic protections reset
Controls
Alarm
POWER SUPPLY
Type
Settings
RF amplifier module
over-temperature 70°
Excessive reflected power
Permissible VSWR≤ 1.5
Overeating 45°C
Over charge / Short circuit
Excessive VSWR
Stopping of unit after 8 alarms
Stopping of the unit after 16 alams
-
Manual, remote or automatically
every 24 hours
-
Mains-dB 15 Connector
(Stand-by and Reset command)
-
Excessive output SWR (red led) 50W
adj. – Alarm (red led)- Stand-by (yellow led)- Mains- DCout -ALC
-
VL3
VL5-VL10
Switch mode (double conversion voltage direct mains)
Single phase;
Mono Phase by internal jumper
-
Factory & Engineering - Via Per Cantalupo, 5 - 21040 Origgio (VA) - ITALY
Tel. +39 02 96738811 - Fax +39 02 96738868 - info@ctedb.it - www.ctedb.it
VL3 - VL5 - VL10 | FM EQUIPMENT
RF OUTPUT SPECIFICATION
Pag. 2 di 3
VL3 - VL5 - VL10
FM EQUIPMENT
SPECIFICATION
VL3
VL5
VL10
RF output power
2500W
5KW
10KW
Nr. Of transistor
8 MOS-FET SD 2942
16 MOS-FET SD 2942
32 MOS-FET SD 2942
40W - 60W
80W - 120W
250W - 300W
RF Input (Nominal Level)
Output Connector
Dimension (WxHxD) mm
Weight
Power consumption
Power supply req.
Nr. of power supply boards
7/8 EIA
5U+2U
482x220x700
482x88x700
30U/44U
540X1380X1000
44U
540X2000X1000
54 Kg
255 Kg
500 Kg
4300 W
8100 W
17900 W
Three-phase 380
Vac±15% / 230 Vac
mono-phase
Three-phase 380 Vac±15%
3
6
12
2 blowers for each PA & PS module
Number of fans
Nominal air volume
1-5/8 EIA
740 m3/min
1440 m3/min
2920 m3/min
TEMPERATURE
Storage range
Maximum relative Humidity
Max Operating Altitude
0° to 45°C
-40° to 70° C
90% @26°C non condensing
2500 mt.a.s.l.
STANDARD COMPLIANCE
Conformity
Directive 99/5/CE
Radio Spectrum
ETS 302 018-2 V1.2.1
EMC
ETS 301 489-11 V1.3.1
Safety
EN 60215:1989; EN 60215/A1:1992-07; EN 60215/A2:1994-09;
Factory & Engineering - Via Per Cantalupo, 5 - 21040 Origgio (VA) - ITALY
Tel. +39 02 96738811 - Fax +39 02 96738868 - info@ctedb.it - www.ctedb.it
VL3 - VL5 - VL10 | FM EQUIPMENT
Operating range
Pag. 3 di 3
VL3 - VL5 - VL10
FM EQUIPMENT
REMOTE CONTROL
Web Browser by TCP/IP
SNMP Protocol (RJ45)
LAN
RS232
Software Remote Controller by GSM Modem (DB9f)
RS485
Internal BUS connection for system connectivity
(DB9 in&out)
2 x DB15 A I/O
Parallel TS & TC
MODEL
DESCRIPTION
OPTIONS
6000545058
VL3
2,5 Kw Power Amplifier 87.5-108 MHz
-
8001400001
VL5
5Kw Power Amplifier 87.5-108 MHz
30U cabinet Included
8001400002
VL5
5 Kw Power Amplifier 87.5-108Mhz
42U Cabinet Included
8001400003
VL5
5Kw Powre Amplifier 87.5-108MHz
42U Cabinet Included
+ Fan
8001400004
VL10
10Kw Power Amplifier 87.5-108 MHz
42U cabinet Included
+ Fan
VL3 - VL5 - VL10 | FM EQUIPMENT
CODE
Factory & Engineering - Via Per Cantalupo, 5 - 21040 Origgio (VA) - ITALY
Tel. +39 02 96738811 - Fax +39 02 96738868 - info@ctedb.it - www.ctedb.it
FM EQUIPMENT
Pag. 1 di 3
FM ANALOGUE LINKS & TRANSPOSER
The general purpose of this FM radio transposer
TRC series, is rebroadcast the signals in the same
FM band granting an effective coverage for all
those areas where RF signal is too weak.
This equipment can be provides at three output
power figures and broadcast quality. A complete
electrical shield separates the transmitting and
receiving sections, thus avoiding undesired mutual interactions. All the circuitres have been designed according to “modularity concept”, to grant
easy quick mainteniance this concept also allows using the equipments as single receiver or single transmitter,
since the connection between these two sections is externally placed and accessible by BNC connectors. Both
sections can be remotely controlled via RS232 port. In the design of the TRC series transposer, a special attentionhas been devoted to the consumption aspect: AC-DC switch-mode power supplies have been therefore
implemented, with PFC (Power Factor Connector) to drastically reduce the absorption of reactive power.
FREQUENCY
Modulation
Range setting
Fine frequency Adjustment
Solid state direct FM frequency synthesized crystal ref. thermal compensated
87,5-108 MHz
Directly digitally programmable on the front panle in 10kHz steps
Internal trimmer
Harmonic suppression
< -65 dBc
Spurious Emission
< -80 dBc
Residual Asynchrony AM
> 60 dB Weighed
Residual Synchrony AM
> 60 dB Weighed
S/N RATIO (weighted)
> 70 dB (referred to ± 75kHz)
Distortion
0.1% for 75kHz FM deviation
Probe
BNC RF test
Factory & Engineering - Via Per Cantalupo, 5 - 21040 Origgio (VA) - ITALY
Tel. +39 02 96738811 - Fax +39 02 96738868 - info@ctedb.it - www.ctedb.it
FM ANALOGUE LINKS & TRANSPOSER | FM EQUIPMENT
RF OUTPUT SPECIFICATION VIDEO PERFORMANCE
FM EQUIPMENT
Pag. 2 di 3
FM ANALOGUE LINKS & TRANSPOSER
AUDIO SPECIFICATION
BNC 2k Ohm
Mono/MPX
3 x BNC f
SCA
Mono/MPX SCA Level
From 0 to + 12 dBm
Stereo separation
> 55dB@1Khz dBm
RECEIVER SPECIFICATION
Selectivity Static
3dB@ ± 150kHz;
70 dB @ ± 600KHz
Selectivity Dynamic
± 300 KHz @ + 5 dB
± 400 KHz @ + 25 dB
± 500 KHz @ + 30 dB
Sensitivity Mono
(deviation ± 75 KHz)
15 mV (S/N = 60 dB with bandwidth = 30 ÷ 15 KHz decoded, de-emphasis)
Setting
Frequency from front panel display, 10 kz step.
Input filter by standard procedure
Displayer Meter
Frequency, power output, voltage, lock, input level meter, input level set,
carrier enable, temperature alarm set, -3dB power down alarm set
Protections
Alarm frequency programming error, Local oscillator locked in- heat sink
temperature exceeds that set- RF output power below2,5W (TX version)
– RF output power below squelch threshold (RX version) – Power supply
voltage of a module outside the permitted range
REMOTE CONTROL
Output connector
DB9 connectors
RX: RS232 signal; TX: RS232 signal
Factory & Engineering - Via Per Cantalupo, 5 - 21040 Origgio (VA) - ITALY
Tel. +39 02 96738811 - Fax +39 02 96738868 - info@ctedb.it - www.ctedb.it
FM ANALOGUE LINKS & TRANSPOSER | FM EQUIPMENT
DESIGNED DATA
Pag. 3 di 3
FM ANALOGUE LINKS & TRANSPOSER
FM EQUIPMENT
STANDARDS COMPLIANCE
Radio Spectrum EMC
Safety R&TTE
ETSI 300-384
ETSI 449, ETS-339, ETS-384, CCIR-450, CCIR-412, CCIR-559, CCIR-468
EN 60950 – EN 60215
Declaration of Conformity with regards to the Directive 199/5/EC
TEMPERATURE
Nominal range
0° to 45° (Meets ETS 300 019 requirements)
Storage range
-30° to 50°
90% non condensing
Maximum relative Humidity
2500mt a.s.l.
Max Operating Altitude
TRC-5530
TRC-55100
TRC-55250
RF output power
30W
100W
250W
Output Connector
N type female 50 Ohm
N type female
N type female 50 Ohm
482 x 132 x 380
Dimension (WxHxD) mm
3,5Kg
Weight
Power consumption
Approx. <120 VA
Approx. <160VA
Approx.< 260VA
100÷240 Vac : 47 ÷ 63 Hz
Power supply Req.
Forced Air
Cooling
CODE
MODEL
DESCRIPTION
0005320003
TRC-5530
30W FM Transposer
0005320004
TRC-55100
100W FM Transposer
0005320005
TRC-55250
250W FM Transposer
Factory & Engineering - Via Per Cantalupo, 5 - 21040 Origgio (VA) - ITALY
Tel. +39 02 96738811 - Fax +39 02 96738868 - info@ctedb.it - www.ctedb.it
FM ANALOGUE LINKS & TRANSPOSER | FM EQUIPMENT
SPECIFICATION
Pag. 1 di 2
ACS N+1
TV AND FM EQUIPMENT
This NEW Change-Over unit is designed for
management of systems in configurations up to
6+1. By means of a parallel interface, the ChangeOver unit constantly monitors different receiving/
transmitting parameters of the system, along with
the position feedback of the coaxial switches. The
definition of the program to be used for the reserve
equipment, is implicitly set by the position of the
base-band relay switches, and/or by the received
RF figure. To provide both local and remote users
with accurate information about the operational figures of the monitored units, an Ethernet connection
is available at the radio reception end in the system. The local interface is based on graphical touch-screen
display, where a clear synoptic view of the monitored system is available. To deploy the remote control
function, RS232, parallel interface, SNMP and WEB server are available
SPECIFICATION
Power Consumption
Approx less then 50VA
Dimension (WxHxD) mm
485x88x500
Weight
Approx 9.5kg
Nr. of power supply
2
Number of fans
0
Remote control
RS485/Parallel/SNMP/HTTP
Standard compliance
EMC: EN 300-489-1 EN 301-489-14
SAFETY: EN 60950 EN 60215
Operating range
-5/+45°C
Storage range
-10/80°C
Max operating altitude
90% non condencing
2500m a.s.l.
ACS N+1 | TV AND FM EQUIPMENT
Maximum relative humidity
Factory & Engineering - Via Per Cantalupo, 5 - 21040 Origgio (VA) - ITALY
Tel. +39 02 96738811 - Fax +39 02 96738868 - info@ctedb.it - www.ctedb.it
TV AND FM EQUIPMENT
Pag. 2 di 2
ACS N+1
HTML Interface
ACS N+1 | TV AND FM EQUIPMENT
The Web Interface uses the same synoptic view of the touch screen display
Factory & Engineering - Via Per Cantalupo, 5 - 21040 Origgio (VA) - ITALY
Tel. +39 02 96738811 - Fax +39 02 96738868 - info@ctedb.it - www.ctedb.it
Pag. 1 di 14
CAVITY FILTERS
FM ACCESSORIES
The DCF are one-quarter wavelength coaxial
cavities, designed and manufactured according
to high quality standards conceived for 87,5
÷108 MHz band. Using a bandpass double cavity installed between transmitter and antenna
they drastically reduce spurious signals, besides
other intermodulation products. DCF’s and TCF’s
double and triple cavity filters respectively,
are provided with rotating knobs to allow easy
tuning of the circuit for different sideband
attenuation and with a variable coupling.
DCF500 DCF1000 DCF2000 DCF3000 DCF5000 DCF10000 TCF3000
RF Input Power
800
Input Connector
N
7/16
Output Connector
N
7/16
Weight
Bandwidth (-3dB)
Typical insertion loss
1000
10Kg
2000
11Kg
18Kg
3000
5000
10000
3000
7/8
1+5/8
7/8
7/8
1+5/8
7/8
40Kg
27Kg
19Kg
800KHz
<0,4dB
29Kg
600KHz
<0,3dB
Frequency range
87,5÷108 MHz
Input Impedance
50 Ohm
VSWR
≤1.15:1
<0,2 dB
Internal parts
Silver-plated brass and PTFE
External parts
Aluminuim
500KHz
From 0,3
to 0,8 dB
Black
Colour
From -10°C to +50°C
Temperature operating range
double
Type
triple
CODE
MODEL
DESCRIPTION
0000170411
DCF 500
800w Power rate per channel IN/OUT N
0000170601
DCF 1000
1000w Power rate per channel IN/OUT N
0000170019
DCF 2000
2Kw Power rate per channel IN/OUT 7/16”
0000170602
DCF 3000
3Kw Power rate per channel IN/OUT N
0000170412
DCF 5000
5Kw Power rate per channel IN/OUT 7/8”
0000170603
DCF 10000
10Kw Power rate per channel IN/OUT N
0000170488
TCF 3000
3Kw Power rate per channel IN/OUT 7/8”
Factory & Engineering - Via Per Cantalupo, 5 - 21040 Origgio (VA) - ITALY
Tel. +39 02 96738811 - Fax +39 02 96738868 - info@ctedb.it - www.ctedb.it
CAVITY FILTERS | FM ACCESSORIES
SPECIFICATIONS
Pag. 2 di 14
STARTPOINT
FM ACCESSORIES
The startpoint combining filters are pre-set
in our labs, at the frequency required by the
customers. Even at 100% modulation, they assure a good separation for adjacent frequencies
up to 2MHz. They are composed of two or more
coaxial cavity filters connected to rigid lines all
of them equipped with arrow band input lines.
Combining systems for low figures of frequency
channels separation and high RF power, will
be designed on request by our technical department.
SPECIFICATIONS
DSX
1000
DSX
1000H
TTX
500
RF Input Power
800
1000
500
2000
Input Connector
N
7/16
N
7/16
Output Connector
7/16
Weight
23Kg
DSX
2000
TTX
2000
7/8
28Kg
40Kg
DSX
5000
TTX
5000
QPX
1000
500
1000
1-5/8
N
7/8
3-1/8
7/8
1-5/8
120Kg
47Kg
80Kg
5000
7/8
1-15/8
42Kg
QPX
500
60Kg
80Kg
Minimun Frequancy Spacing
2,5MHz
2,2 MHz
Isolation Between Channels
>30dB
>35dB
Typical insertion loss
<0,6dB
<0,5dB
<0,4 dB
Frequency range
87,5÷108 MHz
Input Impedance
50 Ohm
VSWR
≤1.2:1
Internal parts
Silver-plated brass and PTFE
External parts
Aluminuim
Temperature operating range
Black
From -10°C to +50°C
STARTPOINT | FM ACCESSORIES
Colour
Factory & Engineering - Via Per Cantalupo, 5 - 21040 Origgio (VA) - ITALY
Tel. +39 02 96738811 - Fax +39 02 96738868 - info@ctedb.it - www.ctedb.it
Pag. 3 di 14
STARTPOINT
FM ACCESSORIES
CODE
MODEL
DESCRIPTION
0000170421
DSX 1000
Diplexer 800 W power rate per channel IN N, OUT 7/16”
0000170422
DSX 2000
Diplexer 2KW power rate per channel IN 7/16”, OUT 7/8”
0000170423
DSX 5000
Diplexer 4KW power rate per channel IN 7/8” OUT 1-5/8”
0000170509
DPX 2000T
Diplexer 2KW power rate per channel with triple cavity IN 7/16”, OUT 7/8”
0000170424
TTX 500
Triplexer 800W power rate per channel, IN N, OUT 7/8”
0000170425
TTX 2000
Triplexer 2KW power rate per channel, IN 7/8”, OUT 1-5/8”
0000170386
TTX 5000
Triplexer 4KW power rate per channel, IN 1-5/8”, OUT 7/8”
0000170480
QPX 500
Quadriplexer 500 W power rate per channel IN N, OUT 7/8”
0000170483
QPX 1000
Quadriplexer 500 W power rate per channel IN 7/8”, OUT 1-5/8”
STARTPOINT | FM ACCESSORIES
ON REQUEST, WE HAVE SPECIAL VERSION FOR LOW CHANNEL SPACING (UP TO 1,5MhZ)
Factory & Engineering - Via Per Cantalupo, 5 - 21040 Origgio (VA) - ITALY
Tel. +39 02 96738811 - Fax +39 02 96738868 - info@ctedb.it - www.ctedb.it
Pag. 4 di 14
DIPLEXER DOUBLE BRIDGE
FM ACCESSORIES
The “double bridge” combining filters allow
easy changes to new figures of the operating
frequencies. With 100% modulation, they can
satisfactory separate two adjacent frequencies
up to 2MHz. They are composed of two different
double cavity filters and two hybrid couplers,
including narrow band and wide band input
lines. Low figures of frequency channels separation and high RF power, will be designed on
request by our technical department.
SPECIFICATIONS
DPX 1000
DPX 2000
DPX 4000
RF Input Power
800
2000
4000
Input Connector
N
7/16
Output Connector
7/16
Weight
28Kg
DPX3-5000
5000
7/8
7/8
58Kg
60Kg
2,2MHz
Minimun Frequency Spacing
Isolation Between Channels
>30dB
Typical insertion loss
<0,6dB
TLX 5000
1-5/8
1-5/8
3-1/8
107Kg
230Kg
1,5 MHz
2,2MHz
>35dB
<0,5dB
Frequency range
87,5÷108 MHz
Input Impedance
50 Ohm
<0,4dB
≤1.2:1
VSWR
Internal parts
Silver-plated brass and PTFE
External parts
Aluminuim
From -10°C to +50°C
Temperature operating range
Double
Cavity Type
Triple
CODE
MODEL
DESCRIPTION
0000170421
DPX1000
Diplexer Double Bridge 800W Power rate per channel, IN N, OUT 7/16”
0000170422
DPX2000
Diplexer Double Bridge 2KW Power rate per channel, IN 7/16”, OUT 7/8”
0000170423
DPX4000
Diplexer Double Bridge 4KW Power rate per channel, IN 7/8”,
OUT 1+5/8”
0000170509
DPX3-5000
Diplexer Double Bridge 5KW Power rate per channel with triple cavity,
IN 7/8”, OUT 1+5/8”
Factory & Engineering - Via Per Cantalupo, 5 - 21040 Origgio (VA) - ITALY
Tel. +39 02 96738811 - Fax +39 02 96738868 - info@ctedb.it - www.ctedb.it
DIPLEXER DOUBLE BRIDGE | FM ACCESSORIES
Black
Colour
Pag. 5 di 14
FM POWER DIVIDER
FM ACCESSORIES
These power dividers are available for any
RF output power with 50ohm impedance (or
75ohm request). They can be supplied with any
connector or flange, according to user requirements and for every need regarding the number
of outputs. Our power dividers are broadband
from 87,5 to 108 MHz and 22 MHz bandwidth.
The typical insertion loss is from 0,2 to 0,5 dB
with alodyne with insulator in PTFE and o-ring
type washers; the body of the device is treated
and covered by a special paint for life duration in
any climate conditions. Power dividers for other
frequency ranges are available upon request.
2-WAY POWER DIVIDER VHF II
CODE
MODEL
OUTPUT CONNECTOR
INPUT CONNECTOR
MAX INPUT POWER
(W)
0000170004
PD2-N/N
(one single step)
0000170352
PD2-S/N
(one single step)
0000170054
PD2-S/S 2
(one single step)
0000170460
PD2-F/N
7/8
N
1600
0000170458
PD2-F/S
7/8
7/16
4000
0000170459
PD2-F/F
0000170406
PD2-Y/S
1+5/8
7/16
4000
0000170416
PD2-Y/F
1+5/8
7/8
10000
0000170407
PD2-Z/Y
3+1/8
1+5/8
20000
INPUT CONNECTOR
OUTPUT CONNECTOR
MAX INPUT POWER
(dB)
N
7/16
800
N
1600
7/16
2000
7/8
5000
CODE
MODEL
0000170446
PD3-N/N
(one single step)
0000170451
PD3-S/N
(one single step)
7/16
N
2000
0000170452
PD3-F/N
(one single step)
7/8
N
2400
0000170453
PD3-F/S
7/8
7/16
5000
0000170454
PD3-F/F
0000170455
PD3-Y/S
1+5/8
7/16
6000
0000170408
PD3-Y/F
1+5/8
7/8
10000
N
800
7/8
5000
Factory & Engineering - Via Per Cantalupo, 5 - 21040 Origgio (VA) - ITALY
Tel. +39 02 96738811 - Fax +39 02 96738868 - info@ctedb.it - www.ctedb.it
FM POWER DIVIDER | FM ACCESSORIES
3-WAY POWER DIVIDER VHF II
Pag. 6 di 14
FM POWER DIVIDER
FM ACCESSORIES
4-WAY POWER DIVIDER VHF II
CODE
MODEL
INPUT CONNECTOR
OUTPUT CONNECTOR
MAX INPUT
POWER (dB)
0000170005
PD4-N/N
(one single step)
0000170024
PD4-S/N
0000170403
PD4-S/S
(one single step)
0000170450
PD4-F/N
7/8
N
3200
0000170055
PD4-F/S
7/8
7/16
5000
0000170460
PD4-F/F
0000170017
PD4-Y/S
1+5/8
7/16
8000
0000170408
PD4-Y/F
1+5/8
7/8
10000
N
1000
7/16
N
2000
7/16
2000
7/8
5000
6-WAY POWER DIVIDER VHF II
CODE
MODEL
INPUT CONNECTOR
OUTPUT CONNECTOR
MAX INPUT POWER
(dB)
0000170022
PD6-S/N
7/16
N
2000
0000170409
PD6-F/N
7/8
N
4800
0000170018
PD6-F/S
7/8
7/16
5000
0000170410
PD6-F/F
0000170437
PD6-Y/S
1+5/8
7/16
10000
0000170460
PD6-Y/F
1+5/8
7/8
10000
5000
FM POWER DIVIDER | FM ACCESSORIES
7/8
Factory & Engineering - Via Per Cantalupo, 5 - 21040 Origgio (VA) - ITALY
Tel. +39 02 96738811 - Fax +39 02 96738868 - info@ctedb.it - www.ctedb.it
Pag. 7 di 14
FM DIPOLE ANTENNAS
FM ACCESSORIES
PLS1
DIP11
DIP15
DIP13
These dipole antennas are rugged broadband
aerials especially designed for arrays composed
of several elements. The dipole is made of hot
galvanized steel to provide high corrosion resistance, for a lifetime duration and operation in
any climate conditions. A thick internal ground
connection across the feeding line assures heavy
duty service and protection in case of lightning.
The design of the internal lines and PTFE insulator provide reliability and long lasting operation
for power ratings up to 1500W on the DIP11
model, and up to 5000W on the DIP15 model.
The aluminium dipole PLS1 model is a smart, effective and budget solution. An accurate testing
process is carried out at factory on each of these
dipoles to control the compliance to all the stated figures.
SPECIFICATIONS
PLS1
DIP11
DIP13
DIP15
RF Input Power
500W
800-2kW-3kW
800-2kW
5kW
Input Connector
N
N-7/16-7/8
N-7/16
7/8
4Kg
16Kg
10Kgs
25Kgs
Vertical
Polarization
4Kg
7Kg
Gain (Referred to half-wave
Dipole)
2dB
H Plane-V Plane
180°-78°
Max Wind Velocity
150Km/h
Wind load (with speed at
150Km/h)
10Kgs
18Kgs
0,11SQM
Wind surface
0,18SQM
Frequency range
87,5 ÷108 MHz
Input impedance
50Ohm
VSWR
≤1,4:1
Silver-plated brass and PTFE
Internal parts
External parts
Mounting
Dimension
Aluminium
Hot Galvanized
steel
Aluminium
Hot galvanized
steel
From 60 to 120mm diam.
60x1400x850
100x1340x910
Factory & Engineering - Via Per Cantalupo, 5 - 21040 Origgio (VA) - ITALY
Tel. +39 02 96738811 - Fax +39 02 96738868 - info@ctedb.it - www.ctedb.it
FM DIPOLE ANTENNAS | FM ACCESSORIES
Weight
Pag. 8 di 14
FM DIPOLE ANTENNAS
FM ACCESSORIES
N°BAYES dB GAIN
ANTENNA
POWER
APERTURE
GAIN
(MT)
WEIGHT (Kg)
WIND LOAD (v=150m/h)
PLS1
DIP11
DIP15
PLS1
DIP11
DIP15
1
2
1.58
1.4
4
7
16
10
18
25
2
5
3.16
4.1
8
14
32
20
36
50
4
8
6.3
9.5
16
28
64
40
72
100
6
9.8
9.5
14.9
24
42
96
60
108
150
8
11
12.6
20.3
32
56
128
80
144
200
MODEL
DESCRIPTION
0000170003
PLS1
Aluminium Dipole, 600W N Connector
upon request
PLS16
Aluminium Dipole, 1500W 7/16 Connector
0000170013
DIP11/N
Galvanized steel dipole, 600W N connector
0000170014
DIP11/16
Galvanized steel dipole 1.5Kw 7/16 connector
0000170015
DIP11/F
Galvanized steel dipole, 1,5 kW 7/8 flange
0000170011
DIP15/F
Galvanized steel dipole, 5kW 7/8 flange
0000170597
DIP13/N
Aluminuim dipole, 500W de mountable N connector
0000170596
DIP13/H/N
Aluminuim dipole, 800W, de mountable N connector
0000170484
DIP13/16
Aluminium dipole, 1500W de mountable 7/16 connector
FM DIPOLE ANTENNAS | FM ACCESSORIES
CODE
Factory & Engineering - Via Per Cantalupo, 5 - 21040 Origgio (VA) - ITALY
Tel. +39 02 96738811 - Fax +39 02 96738868 - info@ctedb.it - www.ctedb.it
Pag. 9 di 14
PANEL DIPOLES
FM ACCESSORIES
These advanced and hot galvanized steel panel
antennas are successfully used in high power antenna system arrays. The standard application of
the panel antenna is to be mounted on one side
of the transmitting tower for radiating systems
with directional coverage. Whenever a circular
pattern on a large area should be achieved, four
antennas can be mounted in correspondence of
the four sides of the transmitting tower. An accurate testing processed is carried out at factory
on each antenna to control the compliance to all
the stated figures.
APL1
APL5
APL1
APL5
RF Input Power
600-1500W
200-5000W
Input Connector
N-7/16-7/8
7/16-7/8
Veritcal or Horizontal
Polarization
Weight
23Kg
45Kg
Gain (Referred to half-wave
Dipole)
6dB
7,5dB
130°-73° (78°-160°)
57°-73°
H Plane-V Plane
225Km/h
Max Wind Velocity
Wind load (with speed at
150Km/h)
Wind surface
110Kgs
140Kgs
0,46 SQM
0,65 SQM
Frequency range
87,5÷108 MHz
Input impedance
50Ohm
VSWR
≤1.4:1
Internal parts
Silver-plated brass and PTFE
External parts
Hot galvanized steel
Mounting
From 60 to 120mm diam.
Dimension
2000x1280x850
Factory & Engineering - Via Per Cantalupo, 5 - 21040 Origgio (VA) - ITALY
Tel. +39 02 96738811 - Fax +39 02 96738868 - info@ctedb.it - www.ctedb.it
FM ACCESSORIES | PANEL DIPOLES
SPECIFICATIONS
Pag. 10 di 14
PANEL DIPOLES
FM ACCESSORIES
N°
BAYES
dB GAIN
POWER GAIN
ANTENNA
APERTURE (mt)
WIND LOAD
(v=150m/h)
WEIGHT (kg)
APL1
APL5
APL1
APL5
APL1
APL5
APL1
APL5
APL1
APL5
1
6
7,5
4
5,6
2
2,5
27
45
110
140
2
9
10,5
8
11,2
4,7
5,2
54
90
220
280
4
12
13,5
16
22,4
10,1
10,6
108
180
440
560
6
13,8
15,3
24
33,6
15,5
16
162
270
660
840
8
15,1
16,5
32
44,8
20,9
21,4
216
360
880
1120
MODEL
DESCRIPTION
0000170439
APL1/16
Dipole panel galvanized steel ,7/16 Connector
0000170440
APL1/F
Dipole panel galvanized steel 7/8 flange
0000170441
APL1/N
Dipole panel galvanized steel N connector
0000170012
APL5/16
Double dipole panel galvanized steel, 2kW 7/16 connector
0000170404
APL5/F
Double dipole panel galvanized steel, 5kW 7/8 Flange
FM DIPOLE ANTENNAS | FM ACCESSORIES
CODE
Factory & Engineering - Via Per Cantalupo, 5 - 21040 Origgio (VA) - ITALY
Tel. +39 02 96738811 - Fax +39 02 96738868 - info@ctedb.it - www.ctedb.it
Pag. 11 di 14
CIRCULARLY POLARIZED DIPOLES
FM ACCESSORIES
These antennas have been designed to obtain
circularly polarized radiant patterns, for low and
medium output power FM radio transmitters.
For easy and low cost transportation, the PLC4
models are disassembled and packed. The PLC5
model is factory tuned onto any channels within
87.5-108 MHz according to the customer’s requests. Standard PLC4 are realized in stainless.
Due to their higher dimensions and to reduce
excessive weight of antenna system, PLC4-H
(high power antennas) are realized in aluminuim
covered by a special paint treatment, for heavy
duty service and long term duration.
PLC4
PLC 4H
PLC 4R
PLC 5
RF Input Power
600-1500-3000W
5000W
600-1500-3000W
500W
Input Connector
N-7/16-7/8
7/8
N-7/16-7/8
N
Circular
Polarization
Weight
12Kg
Gain (Referred to half-wave
Dipole)
H Plane-V Plane
14Kg
-1,5dB
0dB
-1,5dB
Onmidirectional
Directional
270°-330°
150Km/h
Max Wind Velocity
Wind load (with speed at
150Km/h)
Wind surface
4Kg
45Kgs
80Kgs
75Kgs
25Kgs
0,1SQM
0,16SQM
0,15SQM
0,09SQM
Frequency range
87,5 ÷108 MHz
Input impedance
50Ohm
VSWR
≤1,4:1
Internal parts
Silver-plated
brass and PTFE
Aluminium
treatment
Silver-plated brass and PTFE
External parts
Stainless steel
Alodyne
Stainless steel
Mounting
Dimension
From 60 to 120mm diam.
1240x1520x1150
580x850x350
Factory & Engineering - Via Per Cantalupo, 5 - 21040 Origgio (VA) - ITALY
Tel. +39 02 96738811 - Fax +39 02 96738868 - info@ctedb.it - www.ctedb.it
CIRCULARLY POLARIZED DIPOLES | FM ACCESSORIES
SPECIFICATIONS
FM ACCESSORIES
MODEL
DESCRIPTION
0000170044
PLC4/N
Double-crossed dipole Stainless steel ,800W N Connector
0000170043
PLC4/16
Double-crossed dipole Stainless steel ,2KW 7/16 Connector
0000170436
PLC4/F
Double-crossed dipole Stainless steel ,3KW 7/8 Flange
0000170448
PLC4/H/F
Double-crossed dipole Aluminium ,5KW 7/8 Flange
0000170467
PLC5/N
Tuned dipole narrow band stainless steel, 600W N Connector
0000170489
RPLC4
Reflector for double-cross dipole model PLC4
0000170490
RPLC4/H
Reflector for double-cross dipole model PLC4/H
CIRCULARLY POLARIZED DIPOLES | FM ACCESSORIES
CODE
Pag. 12 di 14
CIRCULARLY POLARIZED DIPOLES
Factory & Engineering - Via Per Cantalupo, 5 - 21040 Origgio (VA) - ITALY
Tel. +39 02 96738811 - Fax +39 02 96738868 - info@ctedb.it - www.ctedb.it
Pag. 13 di 14
OMNIDIRECTIONAL ANTENNAS
FM ACCESSORIES
These wideband directional antennas are
available in two versions with 3 or 5 elements.
They are made of hot galvanized steel and
are especially designed for medium and high
output power transmitters. The robust design
of these antennas make them suitable for any
climate conditions and lifetime duration, high
quality and selected materials have been used
in any details: all insulator are made of PTFE and
screw are stainless steel. The metallic parts are
electrically grounded. The ADR3 model is also
available for 140-174 MHz band and 174-215
Mhz, these aerials can be disassembled in two
parts, thus allowing lower freighting costs.
ADR3
ADR5
RF Input Power
ADR3
ADR5
LOG5
LOG8
800-2Kw-3Kw
800-2Kw-4Kw
500W
2Kw
N
7/16
N-7/16-7/8
Input Connector
Vertical
Polarization
H/V
Weight
10Kg
17Kg
4,5Kg
15,5Kg
Gain (Referred to half-wave
Dipole)
5dB
6,5dB
6dB
7,9dB
Directional
270°-330°
H Plane-V Plane
Onmidirectional
200Km/h
Max Wind Velocity
Wind load (with speed at
150Km/h)
Wind surface
21,5Kgs
32Kgs
0,19 SQM
0,30SQM
Frequency range
87,5 ÷108 MHz
Input impedance
50Ohm
VSWR
≤1,4:1
Internal parts
Silver-plated brass and PTFE
External parts
Hot galvanized steel
From 60 to 120mm diam.
Mounting
Dimension
1250x1800x70
1850x1800x70
Factory & Engineering - Via Per Cantalupo, 5 - 21040 Origgio (VA) - ITALY
Tel. +39 02 96738811 - Fax +39 02 96738868 - info@ctedb.it - www.ctedb.it
OMNIDIRECTIONAL ANTENNAS | FM ACCESSORIES
SPECIFICATIONS
FM ACCESSORIES
MODEL
DESCRIPTION
0000170001
ADR3/N
Double-crossed dipole Stainless steel ,800W N Connector
0000170002
ADR3/16
Double-crossed dipole Stainless steel ,2KW 7/16 Connector
0000170400
ADR3/F
Double-crossed dipole Stainless steel ,3KW 7/8 Flange
0000170385
ADR5/N
Double-crossed dipole Aluminium ,5KW 7/8 Flange
0000170401
ADR5/16
Tuned dipole narrow band stainless steel, 600W N Connector
0000170402
ADR5/F
Reflector for double-cross dipole model PLC4
upon request
LOG5
Reflector for double-cross dipole model PLC4/H
upon request
LOG8
FM Log Periodic 8-Elements Aluminium 500W Demontable 7/16
OMNIDIRECTIONAL ANTENNAS | FM ACCESSORIES
CODE
Pag. 14 di 14
OMNIDIRECTIONAL ANTENNAS
Factory & Engineering - Via Per Cantalupo, 5 - 21040 Origgio (VA) - ITALY
Tel. +39 02 96738811 - Fax +39 02 96738868 - info@ctedb.it - www.ctedb.it
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising