Volvo 2015 Early, V40, 2014 Early Owner's manual

Volvo 2015 Early, V40, 2014 Early Owner's manual
V40
Owners Manual
L:7:9>I>DC
DEAR VOLVO OWNER
THANK YOU FOR CHOOSING VOLVO
We hope you will enjoy many years of driving pleasure in your Volvo.
The car has been designed for the safety and comfort of you and your
passengers. Volvo is one of the safest cars in the world. Your Volvo
has also been designed to satisfy all current safety and environmental
requirements.
In order to increase your enjoyment of the car, we recommend that
you familiarise yourself with the equipment, instructions and maintenance information contained in this owner's manual.
Table of contents
00 01 02
2
00 Introduction
01 Safety
Important information................................. 6
Volvo and the environment....................... 10
Seatbelts ..................................................
Airbags......................................................
Activating/deactivating the airbag*...........
Side airbags (SIPS bags) .........................
Inflatable Curtain (IC) ...............................
WHIPS ......................................................
When the systems deploy ........................
Safety mode..............................................
Pedestrian airbag (Pedestrian Airbag)......
Child safety...............................................
* Option/accessory, for more information, see Introduction.
02 Locks and alarm
14
17
20
22
24
25
27
28
29
31
Remote control key/key blade..................
Battery replacement, remote control key/
PCC*.........................................................
Keyless*....................................................
Locking/unlocking.....................................
Child safety locks......................................
Alarm*.......................................................
42
48
50
54
60
61
Table of contents
03 04 05
03 Your driving environment
04 Driver support
05 Comfort and driving pleasure
Instruments and controls.......................... 66
Volvo Sensus ........................................... 77
Key positions............................................ 79
Seats......................................................... 81
Steering wheel.......................................... 86
Lighting..................................................... 87
Wipers and washing.................................. 99
Windows, rearview and door mirrors...... 102
Compass*............................................... 107
Alcolock*................................................. 108
Starting the engine.................................. 112
Starting the engine – external battery..... 114
Gearboxes............................................... 115
Eco Guide & Power*................................ 121
Start/Stop *............................................. 123
Foot brake............................................... 129
Parking brake.......................................... 131
DSTC – Stability and traction control system.......................................................... 138
Road sign information - RSI*.................. 141
Speed limiter*.......................................... 143
Cruise control*........................................ 145
Adaptive cruise control*.......................... 147
Distance Warning*.................................. 158
City Safety™........................................... 161
Collision Warning with Auto Brake &
Pedestrian Detection*............................. 167
Driver Alert System*................................ 175
Driver Alert System - DAC*..................... 176
Driver Alert System - Lane Keeping Aid* 180
Park assist syst*...................................... 184
Park assist camera*................................ 187
Park Assist Pilot - PAP*.......................... 190
BLIS and CTA*........................................ 194
Menus and messages.............................
Menu source MY CAR............................
Climate control........................................
Fuel-driven engine block heater and passenger compartment heater*..................
Additional heater*....................................
Trip computer.........................................
Adapting driving characteristics.............
Comfort inside the passenger compartment........................................................
200
203
212
223
227
229
233
234
HomeLinkŸ *............................................ 132
* Option/accessory, for more information, see Introduction.
3
Table of contents
06 07 08
06 Infotainment system
General information on infotainment......
Radio.......................................................
Media player...........................................
External audio source via AUX/USB*
input........................................................
07 During your journey
240
250
257
261
Media BluetoothŸ* ................................. 264
BluetoothŸ handsfree*............................
Voice recognition* mobile phone............
TV*...........................................................
Remote control* .....................................
4
267
275
279
282
Recommendations during driving...........
Refuelling................................................
Fuel.........................................................
Loading...................................................
Cargo area..............................................
Driving with a trailer................................
Towing and recovery..............................
* Option/accessory, for more information, see Introduction.
08 Wheels and tyres
286
289
291
294
297
299
305
General ...................................................
Changing wheels ...................................
Tyre pressure .........................................
Warning triangle and first-aid kit*............
Emergency puncture repair (TMK)* ........
310
314
318
319
320
Table of contents
09 10 11
09 Maintenance and service
Engine compartment...............................
Lamps.....................................................
Wiper blades and washer fluid................
Battery.....................................................
Fuses......................................................
Car care..................................................
10 Specifications
328
335
341
344
348
357
Type designations...................................
Dimensions and weights.........................
Engine specifications..............................
Engine oil................................................
Fluids and lubricants...............................
Fuel.........................................................
Wheel and tyres, dimensions and pressure ........................................................
Electrical system.....................................
Type approval.........................................
Symbols in the display............................
11 Alphabetical Index
366
368
371
372
374
376
Alphabetical Index.................................. 396
378
379
380
392
5
Introduction
Important information
Reading the Owner's Manual
Introduction
A good way of getting to know your new car is
to read the owner's manual, ideally before your
first journey. This will give you the opportunity
to familiarise yourself with new functions, to
see how best to handle the car in different situations, and to make the best use of all the
car's features. Please pay attention to the
safety instructions contained in the manual.
The specifications, design features and illustrations in this owner's manual are not binding.
We reserve the right to make modifications
without prior notice.
©
In the event of uncertainty over what is standard or an option/accessory, contact a Volvo
dealer.
Special texts
WARNING
Warning texts appear if there is a risk of
injury.
IMPORTANT
"Important" texts appear if there is a risk of
damage.
All types of option/accessory are marked with
an asterisk*.
In addition to standard equipment, this manual
also describes options (factory fitted equipment) and certain accessories (retrofitted extra
equipment).
The equipment described in the owner's manual is not available in all cars - they have different equipment depending on adaptations
for the needs of different markets and national
or local laws and regulations.
Warning for personal injury
NOTE texts give advice or tips that facilitate
the use of features and functions for example.
Footnote
There is footnote information in the owner's
manual that is located at the bottom of the
page. This information is an addition to the text
that it refers to via a number. If the footnote
refers to text in a table then letters are used
instead of numbers for referral.
Message texts
There are displays in the car that show text
messages. These text messages are high-
6
Decals
The car contains different types of decal which
are designed to convey important information
in a simple and clear manner. The decals in the
car have the following descending degree of
importance for the warning/information.
NOTE
Volvo Car Corporation
Option
lighted in the owner's manual by means of the
text being slightly larger and printed in grey.
Examples of this are in menu texts and message texts on the information display (e.g.
Audio settings).
* Option/accessory, for more information, see Introduction.
G031590
Black ISO symbols on yellow warning field,
white text/image on black message field. Used
to indicate the presence of danger which, if the
Introduction
Important information
warning is ignored, may result in serious personal injury or fatality.
Information
Procedure lists
Procedures where action must be taken in a
certain sequence are numbered in the owner's
manual.
Risk of property damage
When there is a series of illustrations for
step-by-step instructions each step is
numbered in the same way as the corresponding illustration.
G031592
G031593
There are numbered lists with letters adjacent to the series of illustrations where the
order of the instructions is not significant.
White ISO symbols and white text/image on
black or blue warning field and message field.
Used to indicate the presence of danger which,
if the warning is ignored, may result in damage
to property.
White ISO symbols and white text/image on
black message field.
NOTE
It is not intended that the decals illustrated
in the owner's manual should be exact replicas of those in the car. They are included
to show their approximate appearance and
location in the car. The information that
applies to your particular car is available on
the respective decals for your car.
Arrows appear numbered and unnumbered and are used to illustrate a movement.
Arrows with letters are used to clarify a
movement when the reciprocal order is of
no relevance.
If there is no series of illustrations for step-bystep instructions then the different steps are
numbered with normal numbers.
Position lists
Red circles containing a number are used
in overview images where different components are pointed out. The number
recurs in the position list featured in connection with the illustration that describes
the item.
7
Introduction
Important information
Bulleted lists
A bulleted list is used when there is a list of
points in the owner's manual.
Example:
• Coolant
• Engine oil
To be continued
`` This symbol is located furthest down to the
right when a section continues on the following
page.
Recording data
Your vehicle contains a number of computers
whose function is to continuously check and
monitor the vehicle's operation and functionality. Some of the computers can record information during normal driving if they detect an
error. In addition, information is recorded in the
event of a collision or incident. Parts of the
recorded information are required so that technicians can diagnose and rectify faults in the
vehicle during servicing and maintenance and
so that Volvo can fulfil legal requirements and
other regulations. In addition to this, the information is used for research purposes by Volvo
in order to continually develop quality and
safety, as the information can contribute to a
better understanding of the factors that cause
accidents and injuries. The information
8
includes details of the status and functionality
of various systems and modules in the vehicle
with regard to engine, throttle, steering and
brake systems, amongst other things. This
information may include details regarding the
way the driver drives the vehicle, such as vehicle speed, brake and accelerator pedal use,
steering wheel movement and whether or not
the driver and passengers have used their
seatbelts. For the reasons given this information may be stored in the vehicle's computers
for a certain length of time, but also as a result
of a collision or incident. This information may
be stored by Volvo as long as it can help to
further develop and further enhance safety and
quality and as long as there are legal requirements and other regulations that Volvo needs
to consider.
Volvo will not contribute to the above-described information being disclosed to third parties
without the vehicle owner's consent. However,
due to national legislation and regulations
Volvo may be required to disclose such information to authorities such as police authorities,
or others who may assert a legal right to have
access to it.
To be able to read and interpret the information
recorded by the computers in the vehicle
requires special technical equipment that
Volvo, and workshops that have entered into
agreements with Volvo, have access to. Volvo
* Option/accessory, for more information, see Introduction.
is responsible that the information, which is
transferred to Volvo during servicing and maintenance, is stored and handled in a secure
manner and that the handling complies with
applicable legal requirements. For further information - contact a Volvo dealer.
Accessories and extra equipment
The incorrect connection and installation of
accessories can negatively affect the car's
electrical system. Certain accessories only
function when their associated software is
installed in the car's computer system. Volvo
therefore recommends that you always contact an authorised Volvo workshop before
installing accessories which are connected to
or affect the electrical system.
Change of ownership for cars with
Volvo On Call*
Volvo On Call is a supplemental service that
consists of safety, security and comfort services. If the car has Volvo On Call and there is a
change of owner, it is very important that these
services are discontinued so that the former
owner cannot access the services in the car.
Contact the call centre by pressing the ON
CALL button in the car or contact an authorised Volvo workshop. See also "Changing the
security code" in the owner's manual for Volvo
On Call.
Introduction
Important information
Information on the Internet
At www.volvocars.com there is further information concerning your car.
To be able to read the QR code, you need a QR
code reader, which is available as an add-on
for a number of mobile phones. A QR code
reader can be downloaded from the App Store
or Android Market.
QR code
9
Introduction
Volvo and the environment
G000000
Volvo Cars' environmental philosophy
Environmental care is one of Volvo Car Corporation's core values which influence all operations. We also believe that our customers share
our consideration for the environment.
Your Volvo complies with strict international
environmental standards and is also manufactured in one of the cleanest and most resourceefficient plants in the world. Volvo Car Corporation has global ISO certification, which
includes the environmental standard ISO
14001 covering all factories and several of our
other units. We also set requirements for our
partners so that they work systematically with
environmental issues.
10
Fuel consumption
Volvo cars have competitive fuel consumption
in each of their respective classes. Lower fuel
consumption generally results in lower emission of the greenhouse gas, carbon dioxide.
It is possible for the driver to influence fuel consumption. For more information read under the
heading, Reducing environmental impact.
Efficient emission control
Your Volvo is manufactured following the concept "Clean inside and out" – a concept that
encompasses a clean interior environment as
well as highly efficient emission control. In
* Option/accessory, for more information, see Introduction.
many cases the exhaust emissions are well
below the applicable standards.
Clean air in the passenger compartment
A passenger compartment filter prevents dust
and pollen from entering the passenger compartment via the air intake.
A sophisticated air quality system, IAQS* (Interior Air Quality System) ensures that the incoming air is cleaner than the air in the traffic outside.
The system consists of an electronic sensor
and a carbon filter. The incoming air is monitored continuously and if there is an increase in
Introduction
Volvo and the environment
the level of certain unhealthy gases such as
carbon monoxide then the air intake is closed.
Such a situation may arise in heavy traffic,
queues and tunnels for example.
The entry of nitrous oxides, ground-level ozone
and hydrocarbons is prevented by the carbon
filter.
Interior
The interior of a Volvo is designed to be pleasant and comfortable, even for people with
contact allergies and for asthma sufferers.
Extreme attention has been given to choosing
environmentally-compatible materials.
Volvo workshops and the environment
Regular maintenance creates the conditions
for a long service life and low fuel consumption
for your car. In this way you contribute to a
cleaner environment. When Volvo's workshops
are entrusted with the service and maintenance of your car it becomes part of our system. Volvo makes clear demands regarding the
way in which our workshops are designed in
order to prevent spills and discharges into the
environment. Our workshop staff have the
knowledge and the tools required to guarantee
good environmental care.
Reducing environmental impact
You can easily help reduce environmental
impact - here are a few tips:
• Avoid letting the engine idle - switch off the
engine when stationary for longer periods.
Pay attention to local regulations.
• Drive economically - think ahead.
• Perform service and maintenance in
accordance with the owner's manual's
instructions - follow the Service and Warranty Booklet's recommended intervals.
Recycling
As a part of Volvo's environmental work, it is
important that the car is recycled in an environmentally sound manner. Almost all of the
car can be recycled. The last owner of the car
is therefore requested to contact a dealer for
referral to a certified/approved recycling
facility.
• If the car is equipped with an engine block
heater*, use it before starting from cold - it
improves starting capacity and reduces
wear in cold weather and the engine reaches normal operating temperature more
quickly, which lowers consumption and
reduces emissions.
• High speed increases consumption con-
The owner's manual and the
environment
The Forest Stewardship CouncilŸ symbol
shows that the paper pulp in this publication
comes from FSCŸ certified forests or other
controlled sources.
siderably due to increased wind resistance
- a doubling of speed increases wind resistance 4 times.
• Always dispose of environmentally hazardous waste, such as batteries and oils, in
an environmentally safe manner. Consult a
workshop in the event of uncertainty about
how this type of waste should be discarded
- an authorised Volvo workshop is recommended.
Following this advice can save money, the
planet's resources are saved, and the car's
durability is extended. For more information
and further advice, see the pages 286 and
376.
* Option/accessory, for more information, see Introduction.
11
Seatbelts ................................................................................................
Airbags....................................................................................................
Activating/deactivating the airbag*.........................................................
Side airbags (SIPS bags) .......................................................................
Inflatable Curtain (IC) .............................................................................
WHIPS ....................................................................................................
When the systems deploy ......................................................................
Safety mode............................................................................................
Pedestrian airbag (Pedestrian Airbag)....................................................
Child safety.............................................................................................
12
* Option/accessory, for more information, see Introduction.
14
17
20
22
24
25
27
28
29
31
SAFETY
01 Safety
01
Seatbelts
General information
Correctly fitted seatbelt.
Heavy braking can have serious consequences
if the seatbelts are not used. Ensure that all
passengers use their seatbelts.
The locking tab at the centre rear seat only fits
into the intended seatbelt buckle.
It is important that the seatbelt lies against the
body so it can provide maximum protection.
Do not lean the backrest too far back. The
seatbelt is designed to protect in a normal
seating position.
Releasing the seatbelt
Press the red button on the seatbelt buckle and
then let the belt retract. If the seatbelt does not
retract fully, feed it in by hand so that it does
not hang loose.
Putting on a seatbelt
Pull the belt out slowly and secure it by pressing its locking tab into the seatbelt buckle. A
loud "click" indicates that the belt has locked.
14
Seatbelt height adjustment. Press the button and
move the belt vertically. Position the belt as high
as possible without it chafing against your throat.
The seatbelt locks and cannot be withdrawn:
Incorrectly fitted seatbelt. The belt must rest on
the shoulder.
• if it is pulled out too quickly
• during braking and acceleration
• if the car leans heavily.
01 Safety
Seatbelts
Make sure that you:
• do not use clips or anything else that can
prevent the seatbelt from fitting properly
• ensure that the seatbelt is not twisted or
caught on anything
• the hip strap must be positioned low down
(not over the abdomen)
• tension the hip strap over the lap by pulling
the diagonal shoulder belt up towards the
shoulder.
WARNING
The seatbelts and airbags interact. If a seatbelt is not used or is used incorrectly, this
may diminish the protection provided by the
airbag in the event of a collision.
WARNING
Never modify or repair the seatbelts yourself. Volvo recommends that you contact an
authorised Volvo workshop.
If the seatbelt has been subjected to a major
load, such as in conjunction with a collision,
the entire seatbelt must be replaced. Some
of the seatbelt's protective properties may
have been lost even if the seatbelt does not
appear damaged. The seatbelt must also be
replaced if it shows signs of wear or damage. The new seatbelt must be typeapproved and designed for installation at
the same location as the replaced seatbelt.
Seatbelts and pregnancy
WARNING
01
correct way. The diagonal section should wrap
over the shoulder then be routed between the
breasts and to the side of the abdomen.
The lap section should lay flat over the thighs
and as low as possible under the abdomen. –
It must never be allowed to ride upward.
Remove the slack from the seatbelt and ensure
that it fits as close to the body as possible. In
addition, check that there are no twists in the
seatbelt.
As the pregnancy progresses, pregnant drivers
should adjust their seats and steering wheel
such that they can easily maintain control of the
vehicle as they drive (which means that they
must be able to easily operate the foot pedals
and steering wheel). The aim should be to position the seat with as large a distance as possible between abdomen and steering wheel.
G020998
Each seatbelt is designed for only one person.
The seatbelt should always be worn during
pregnancy. But it is crucial that it be worn in the
15
01 Safety
01
Seatbelts
Seatbelt reminder
Rear seat
Seatbelt tensioner
The seatbelt reminder in the rear seat has two
subfunctions:
The seatbelts on the driver’s side, the passenger side and at the outer rear seats are fitted
with seatbelt tensioners. A mechanism in the
seatbelt tensioner tightens the seatbelt in the
event of a sufficiently violent collision. The
seatbelt then provides more effective restraint
for the occupants.
• Provides information on which seatbelts
are being used in the rear seat. A message
appears in the information display when
the seatbelts are in use, or if one of the rear
doors has been opened. The message is
cleared automatically after driving for
approximately 30 seconds or after pressing the indicator stalk's OK button.
• Provides a warning if one of the rear seatUnbelted occupants will be reminded to fasten
their seatbelts by means of an audio and visual
reminder. The audio reminder is speed
dependent, and in some cases time dependent. The visual reminder is located in the roof
console and the combined instrument panel.
Child seats are not covered by the seatbelt
reminder system.
16
belts is unfastened during travel. This
warning takes the form of a message on
the information display along with the
audio/visual signal. The warning stops
when the seatbelt is re-fastened, or it can
also be acknowledged manually by pressing the OK button.
The information display, see page 69, shows
which seatbelts are in use. This information is
always available.
WARNING
Never insert the tongue of the passenger's
seatbelt into the buckle on the driver's side.
Always insert the tongue of the seatbelt into
the buckle on the correct side. Do not make
any damages on seatbelts nor insert any
foreign objects into a buckle. The seatbelts
and buckles would then possibly not function as intended in the event of a collision.
There is a risk of serous injury.
01 Safety
Airbags
Analogue combined instrument panel.
Airbag system
If the warning symbol for the airbag system
remains illuminated or illuminates while driving, it means that the airbag system does
not have full functionality. The symbol indicates a fault in the airbag system, the belt
tensioner system, SIPS, the IC system or
some other fault in the system. Volvo recommends that you contact an authorised
Volvo workshop immediately.
As well as the warning symbol, a message may
appear on the information display in appropriate cases. If the warning symbol malfunctions,
the warning triangle illuminates and SRS
airbag Service required or SRS airbag
Service urgent appears in the display. Volvo
recommends that you contact an authorised
Volvo workshop immediately.
Airbag system viewed from above, left-hand-drive
car.
G018666
The warning symbol in the combined instrument panel1 illuminates when the remote control key is in key position II. The symbol clears
after approx. 6 seconds provided the airbag
system is fault-free.
WARNING
G018665
Warning symbol on the combined
instrument panel
01
Airbag system viewed from above, right-handdrive car.
1
See also page 69 for different variants of the combined instrument panel.
17
01 Safety
01
Airbags
The system consists of airbags and sensors. A
sufficiently violent collision trips the sensors
and the airbag(s) are inflated and become hot.
To cushion the impact, the airbag deflates
when compressed. When this occurs, smoke
escapes into the car. This is completely normal. The entire process, including inflation and
deflation of the airbag, occurs within tenths of
a second.
Airbags on the driver's side
Passenger airbag
The car has two airbags to supplement the
protection afforded by the seatbelt on the driver's side. One of the airbags is folded up in the
centre of the steering wheel (see the illustration
on page 17); the steering wheel is labelled
AIRBAG.
WARNING
Volvo recommends that you contact an
authorised Volvo workshop for repair.
Defective work in the airbag system could
cause malfunction and result in serious personal injury.
Location of the front passenger airbag in a lefthand drive car.
NOTE
The sensors react differently depending on
the course of the collision and whether or
not the seatbelts on the driver and passenger side are used.
It is therefore possible that only one (or
none) of the airbags may inflate in a collision. The airbag system senses the force of
the collision on the car and adapts accordingly so that one or more airbags are
deployed.
Individual airbags are also adapted to the
collision force to which the vehicle is subjected.
18
Knee airbag on the driver's side in a left-handdrive car.
The second airbag (at knee level) is fitted in the
lower part of the instrument panel on the driver's side; this panel is labelled AIRBAG.
WARNING
The seatbelts and airbags interact. If the belt
is not used or is used incorrectly, this may
diminish the protection provided by the airbags in the event of a collision.
Location of the front passenger airbag in a righthand drive car.
01 Safety
Airbags
The car has an airbag to supplement the protection afforded by the seatbelt on the passenger side. It is folded up into a compartment
above the glovebox. Its cover panel is marked
AIRBAG.
WARNING
The seatbelts and airbags interact. If the belt
is not used or is used incorrectly, this may
diminish the protection provided by the airbag in the event of a collision.
To minimise the risk of injury if the airbag
deploys, passengers must sit as upright as
possible with their feet on the floor and
backs against the backrest. Seatbelts must
be secured.
01
WARNING
Never place a child in a child seat or on a
booster cushion in the front seat if the airbag
is activated.
Never allow anybody to stand or sit in front
of the front passenger seat.
No one shorter than 140 cm should ever sit
in the front passenger seat if the airbag is
activated.
Failure to follow the advice given above can
endanger life.
WARNING
Do not put objects in front of or above the
dashboard where the passenger airbag is
located.
19
01 Safety
01
Activating/deactivating the airbag*
Key switch off - PACOS*
General information
The airbag for the front passenger seat can be
deactivated if the car is equipped with a switch,
PACOS (Passenger Airbag Cut Off Switch). For
information on how to activate/deactivate, see
under the heading Activating/deactivating.
Key switch off/switch
The switch for the passenger airbag (PACOS)
is located on the passenger end of the instrument panel and is accessible when the passenger door is open (see under the heading
below, Activating/deactivating).
Check that the switch is in the required position. Volvo recommends that the remote control key's key blade be used to change position.
For information on the key blade, see
page 46.
WARNING
Failure to follow the advice given above can
endanger the lives of passengers in the car.
20
WARNING
Activating/deactivating
If the car is equipped with a front passenger
airbag, but does not have a PACOS switch
(Passenger Airbag Cut Off Switch), then the
airbag will always be activated.
WARNING
Never place a child in a child seat or on a
booster cushion in the front seat if the airbag
in the roof
is activated and the symbol
console is illuminated. Failure to follow this
advice could endanger the life of the child.
Position of airbag label plus switch.
WARNING
Do not allow anyone to sit in the front passenger seat if the message in the roof console (see page 21) indicates that the airbag is deactivated and if the warning symbol for the airbag system is also displayed
in the combined instrument panel. This indicates that there has been a severe malfunction. Visit a workshop as soon as possible.
Volvo recommends that you contact an
authorised Volvo workshop.
* Option/accessory, for more information, see Introduction.
The airbag is activated. With the switch in
this position, persons taller than 140 cm
can sit in the front passenger seat, but
never children in a child seat or on a
booster cushion.
The airbag is deactivated. With the switch
in this position, children in a child seat or
on a booster cushion can sit in the front
passenger seat, but never persons taller
than 140 cm.
01 Safety
Activating/deactivating the airbag*
WARNING
Activated airbag
Deactivated airbag
Indicator showing that the passenger airbag is
activated.
Indicator showing that the passenger airbag is
deactivated.
A text message and a warning symbol in the
roof console indicate that the airbag for the
front passenger seat is activated (see preceding illustration).
A text message and a symbol in the roof console indicate that the airbag for the front passenger seat is deactivated (see preceding illustration).
01
Activated airbag (passenger seat):
Never place a child in a child seat or on a
booster cushion on the front passenger seat
when the airbag is activated. This applies to
everyone shorter than 140 cm.
Deactivated airbag (passenger seat):
No one taller than 140 cm should ever sit in
the front passenger seat when the airbag is
deactivated.
Failure to follow the advice given above can
endanger life.
NOTE
When the remote control key is in key position II the warning symbol for the airbag is
displayed on the combined instrument
panel for approx. 6 seconds (see page 17).
Following which, the indicator in the roof
console is illuminated showing the correct
status for the front passenger seat airbag.
For more information about the different key
positions for the remote control key, see
page 79.
* Option/accessory, for more information, see Introduction.
21
01 Safety
Side airbags (SIPS bags)
01
Side airbag
In a side impact collision a large proportion of
the collision force is transferred by the SIPS
(Side Impact Protection System) to beams, pillars, the floor, the roof and other structural
parts of the body. The side airbags at the driver's and front passenger seats protect the
chest area and the hip and are an important
part of the SIPS.
The SIPS bag system consists of two main
components, side airbag and sensors. The
side airbags are located in the front seat backrests.
WARNING
•
Volvo recommends that repairs are only
carried out by an authorised Volvo
workshop. Defective work in the SIPSbag system could cause malfunction
and result in serious personal injury.
•
Do not put objects in the area between
the outside of the seat and the door
panel, since this area is required by the
side airbag.
•
Volvo recommends the use only of car
seat covers approved by Volvo. Other
seat covers may impede the operation
of the side airbags.
•
Location
Driver's seat, left-hand drive.
Side airbags are a supplement the seatbelts. Always use a seatbelt.
Child seats and side airbags
The protection provided by the car to children
seated in a child seat or on a booster cushion
is not diminished by the side airbag.
A child seat or booster cushion can be placed
on the front passenger seat provided that the
car does not have an activated1 passenger airbag.
Front passenger seat, left-hand drive.
The SIPS bag system consists of side airbags
and sensors. A sufficiently violent collision trips
1
22
For information on activating/deactivating the airbag, see page 20.
01 Safety
Side airbags (SIPS bags)
01
the sensors and the side airbags are inflated.
The airbag inflates between the occupant and
the door panel and thereby cushions the initial
impact. The airbag deflates when compressed
by the collision. The side airbag is normally only
deployed on the side of the collision.
23
01 Safety
01
Inflatable Curtain (IC)
Properties
WARNING
Never hang or attach heavy items onto the
handles in the roof. The hook is only
designed for light clothing (not for solid
objects such as umbrellas for example).
Do not screw or install anything onto the
car's headlining, door pillars or side panels.
This could compromise the intended protection. Volvo recommends that you only
ever use Volvo genuine parts that are
approved for placement in these areas.
WARNING
The inflatable curtain IC (Inflatable Curtain) is a
part of SIPS and the airbags. It is fitted in the
headlining along both sides of the roof and
protects the car's occupants sitting in the outer
seats. A sufficiently violent collision trips the
sensors and the inflatable curtain is inflated.
The inflatable curtain helps to prevent the
driver and passengers from striking their heads
on the inside of the car during a collision.
Do not load the car higher than 50 mm under
the top edge of the windows in the doors.
Otherwise, the intended protection of the
inflatable curtain, which is concealed in the
headlining, may be compromised.
WARNING
The inflatable curtain is a supplement to the
seatbelts.
Always use a seatbelt.
24
01 Safety
WHIPS
Protection against whiplash injury –
WHIPS
The whiplash protection system (WHIPS) consists of energy absorbing backrests and specially designed head restraints in the front
seats. The system is actuated by a rear-end
collision, where the angle and speed of the collision, and the nature of the colliding vehicle all
have an influence.
01
Correct seating position
For the best possible protection, the driver and
front seat passenger should sit in the centre of
the seat with as little space as possible
between the head and the head restraint.
Do not obstruct the WHIPS system
WARNING
The WHIPS system is a supplement to the
seatbelts. Always use a seatbelt.
Properties of the seat
When the WHIPS system is deployed, the front
seat backrests are lowered backward to alter
the seating position of the driver and front seat
passenger. This reduces the risk of whiplash
injury.
WARNING
Never modify or repair the seat or WHIPS
system yourself. Volvo recommends that
you contact an authorised Volvo workshop.
WHIPS system and child seats/booster
cushions
Do not leave any objects on the floor behind the
driver's seat/passenger seat that may prevent the
WHIPS system from functioning.
WARNING
Do not squeeze rigid objects between the
rear seat cushion and the front seat backrest. Make sure you do not to obstruct the
function of the WHIPS system.
The protection provided by the car to children
seated in a child seat or on a booster cushion
is not diminished by the WHIPS system.
25
01 Safety
01
WHIPS
WARNING
If a seat has been subjected to extreme
forces, such as due to a rear-end collision,
the WHIPS system must be checked. Volvo
recommends that it is checked by an
authorised Volvo workshop.
Part of the WHIPS system's protective
capacity may have been lost even if the
seats appear to be undamaged.
Do not place objects on the rear seat that may
prevent the WHIPS system from functioning.
WARNING
If a rear seat backrest is folded down, the
corresponding front seat must be moved
forward so that it does not touch the folded
backrest.
26
Volvo recommends that you contact an
authorised Volvo workshop to have the system checked even after a minor rear-end
collision.
01 Safety
When the systems deploy
When the systems deploy
System
Triggered
Seatbelt tensioner,
front seat
In the event of a
frontal collision,
and/or side-impact
collision, and/or
rear-end collision
and/or overturning
Seatbelt tensioner,
rear seatA
Airbags
In a frontal collision
and/or side-impact
accident and/or
overturning
In a frontal collisionB
(Steering wheel airbag, knee airbag,
passenger airbag)
Side airbags (SIPS)
System
A
B
Triggered
Inflatable Curtain IC
In the event of a side
impact and/or overturning and/or some
frontal collisionsB
Whiplash protection
WHIPS
In a rear-end collision
There is no seatbelt tensioner at the centre rear seat.
The bodywork of the car could be greatly deformed in a collision without airbag deployment. A number of factors such
as the rigidity and weight of the object hit, the speed of the
car, the angle of the collision etc. affects how the different
safety systems of the car are activated.
If the airbags have deployed, the following is
recommended:
• Recovering the car. Volvo recommends
In a side-impact
accidentB
that you have it conveyed to an authorised
Volvo workshop. Do not drive with
deployed airbags.
01
WARNING
The airbag system's control module is
located in the centre console. If the centre
console is drenched with water or other liquid, disconnect the battery cables. Do not
attempt to start the car since the airbags
may deploy. Recovering the car. Volvo recommends that you have it conveyed to an
authorised Volvo workshop.
WARNING
Never drive with deployed airbags. They
can make steering difficult. Other safety
systems may also be damaged. The smoke
and dust created when the airbags are
deployed can cause skin and eye irritation/
injury after intensive exposure. In case of
irritation, wash with cold water. The rapid
deployment sequence and airbag fabric
may cause friction and skin burns.
• Volvo recommends that you engage an
authorised Volvo workshop to handle the
replacement of components in the car's
safety systems.
• Always contact a doctor.
NOTE
The airbags and belt tensioner system are
deployed only once during a collision.
27
01 Safety
Safety mode
01
Driving after a collision
If everything seems normal and you have
checked for indications of fuel leakage, you
may attempt to start the car.
Remove the remote control key and open the
driver's door. If a message is now shown to the
effect that the ignition is on, press the start
button. Then close the door and reinsert the
remote control key. The car's electronics will
now try to reset themselves to normal mode.
Then try to start the car.
Warning symbol in the analogue combined instrument panel1.
If the car is involved in a collision, the text
Safety mode See manual may appear on the
information display. This means that the car
has reduced functionality. Safety mode is a
protective state that is enforced when the collision may have damaged any of the car's vital
functions, such as the fuel lines, sensors for
one of the safety systems, or the brake system.
If the message Safety mode See manual is
still shown on the display then the car must not
be driven or towed, but a vehicle recovery service used instead. Even if the car appears to be
driveable, hidden damage may make the car
impossible to control once moving.
Moving the car
If Normal mode is shown after Safety mode
See manual has been reset, the car can be
moved carefully out of a dangerous position.
Do not move the car further than necessary.
Attempting to start the car
First, check that no fuel is leaking from the car.
There must be no smell of fuel either.
1
28
See also page 69 for different variants of the combined instrument panel.
WARNING
Never attempt to repair your car or reset the
electronics yourself if the car has been in
safety mode. This could result in personal
injury or the car not functioning as normal.
Volvo recommends that you engage an
authorised Volvo workshop to check and
restore the car to normal status after Safety
mode See manual has been displayed.
WARNING
Never, under any circumstances, attempt to
restart the car if it smells of fuel when the
Safety mode See manual message is displayed. Leave the car at once.
WARNING
If the car is in safety mode it must not be
towed. It must be transported from its location. Volvo recommends that it is transported to an authorised Volvo workshop.
01 Safety
Pedestrian airbag (Pedestrian Airbag)
Properties
WARNING
01
Folding the airbag (Pedestrian Airbag)
Do not fit any accessories or change anything in the front. Incorrect intervention at
the front may cause incorrect function in the
system and lead to serious injury and damage to the car.
Volvo recommends that genuine wiper arms
are used and that you only use genuine
parts for them.
Handling after activation
If any of the other airbags in the passenger
compartment were activated, the car remains
in safety mode, see page 28.
Airbag (Pedestrian Airbag)
If only the pedestrian airbag was activated:
Airbag housing
1. Move the car to a safe location as close as
possible.
Velcro strap, passenger side
The airbag (Pedestrian Airbag) is fitted under
the bonnet near the windscreen. In the event of
a frontal collision with a pedestrian, the sensors
in the front bumper react and the airbag inflates
if required based on the force of the impact.
The sensors are active at a speed of approx.
20-50 km/h and an ambient temperature
between -20 and +70°C.
2. Fold the airbag following the instructions
under the next heading "Folding the airbag
(Pedestrian Airbag)".
If the airbag is activated (Pedestrian Airbag):
3. Seek the nearest workshop.
• the rear part of the bonnet is raised and
locked in this position
• the brake system is prepared for the
upcoming emergency braking.
WARNING
Volvo recommends that, after activation of
the airbag, you contact an authorised Volvo
workshop as soon as possible.
Velcro strap, driver's side
The airbag may feel warm and give off smoke.
This is normal. Fold the airbag as follows:
1. Find the Velcro strap on the
driver's side (4).
2. Gather the airbag fabric along its length on
the driver's side. Then fold the gathered
fabric towards the centre. Wind the Velcro
strap (double sided) around as much fabric
as possible and fasten it.
29
01 Safety
01
Pedestrian airbag (Pedestrian Airbag)
3. Press the rolled up portion of the airbag
into the airbag housing (2).
4. Repeat steps 1-3 for the passenger side. It
may be necessary to fold the gathered fabric twice on this side in order to wind the
Velcro strap around it.
5. The airbag housing cover will be open
slightly. This is completely normal.
30
01 Safety
Child safety
Children should sit comfortably and
safely
Volvo recommends that children travel in rearfacing child seats until as late an age as possible, at least until 3-4 years of age, and then
front-facing booster cushions/child seats until
up to 10 years of age.
NOTE
01
WARNING
In the event of questions when fitting child
safety products, contact the manufacturer
for clearer instructions.
Do not secure the straps of the child seat to
the seat's horizontal adjustment bar,
springs or the rails and beams under the
seat. Sharp edges may damage the straps.
Child seats
Look in the installation instructions for the child
seat for the correct fitting.
The position of a child in the car and the choice
of equipment are dictated by the child's weight
and size, for more information, see page 32.
Location of child seats
You may place:
NOTE
• a child seat/booster cushion on the pas-
Regulations regarding the placement of
children in cars vary from country to country. Check what does apply.
senger seat, provided the passenger airbag is not activated1.
Volvo has child safety equipment (child seats,
booster cushions & attachment devices) which
is designed for your particular car. Using Volvo's child safety equipment provides you with
optimum conditions for your child to travel
safely in the car. Furthermore, the child safety
equipment fits and is easy to use.
1
G020739
• one or more child seats/booster cushions
Children of all ages and sizes must always sit
correctly secured in the car. Never allow a child
to sit on the knee of a passenger.
Child seats and airbags are not compatible.
NOTE
in the rear seat.
Always fit child seats/booster cushions in the
rear seat if the passenger airbag is activated. If
a child is sitting on the front passenger seat
then he/she could suffer serious injury if the
airbag deploys.
When using child safety products it is
important to read the installation instructions included.
For information on activated/deactivated airbag, see page 20.
31
01 Safety
Child safety
01
WARNING
WARNING
Never place a child in a child seat or on a
booster cushion in the front seat if the airbag
(SRS) is activated.
No one shorter than 140 cm should ever sit
in the front passenger seat if the airbag
(SRS) is activated.
Failure to follow the advice given above can
endanger life.
Label Airbag
Booster cushions/child seats with steel
braces or some other design that could rest
on the seatbelt buckle's opening button
must not be used, as they could cause the
seatbelt buckle to open accidentally.
Do not allow the upper section of the child
seat to rest against the windscreen.
The label becomes visible when the passenger
door is opened; see the illustration on page 20.
Recommended child seats2
Weight
Front seat (with deactivated airbag)
Group 0
Group 0+
Type approval: E5 04301146
max 13 kg
(L)
Group 0
Volvo infant seat (Volvo Infant Seat) rear-facing child seat, secured with the
car's seatbelt.
Volvo infant seat (Volvo Infant Seat) rear-facing child seat, secured with the
car's seatbelt.
Volvo infant seat (Volvo Infant Seat) rear-facing child seat, secured with the
car's seatbelt.
Group 0+
Type approval: E1 04301146
Type approval: E1 04301146
Type approval: E1 04301146
max 13 kg
(U)
(U)
(U)
max 10 kg
32
Centre rear seat
Volvo infant seat (Volvo Infant Seat) rear-facing child seat, secured with the
ISOFIX fixture system.
max 10 kg
2
Outer rear seat
With regard to other child seats your car should be included in the manufacturer's enclosed list of vehicles or be universally approved in accordance with the ECE R44 legal requirement.
01 Safety
Child safety
Weight
Front seat (with deactivated airbag)
Group 0
Outer rear seat
01
Centre rear seat
Child seats which are universally
approved.
max 10 kg
(U)
Group 0+
max 13 kg
Group 1
9-18 kg
Volvo rear-facing/turnable child seat
(Volvo Convertible Child Seat) - rearfacing child seat, secured with the
car's seatbelt and straps.
Volvo rear-facing/turnable child seat
(Volvo Convertible Child Seat) - rearfacing child seat, secured with the
car's seatbelt and straps.
Type approval: E5 04192
Type approval: E5 04192
(L)
(L)
Group 1
Child seats which are universally
approved.
9-18 kg
(U)
Group 2
15-25 kg
Volvo rear-facing/turnable child seat
(Volvo Convertible Child Seat) - rearfacing child seat, secured with the
car's seatbelt and straps.
Volvo rear-facing/turnable child seat
(Volvo Convertible Child Seat) - rearfacing child seat, secured with the
car's seatbelt and straps.
Type approval: E5 04192
Type approval: E5 04192
(L)
(L)
``
33
01 Safety
01
Child safety
Weight
Front seat (with deactivated airbag)
Outer rear seat
Group 2
Volvo rear-facing/turnable child seat
(Volvo Convertible Child Seat) - frontfacing child seat, secured with the
car's seatbelt.
Volvo rear-facing/turnable child seat
(Volvo Convertible Child Seat) - frontfacing child seat, secured with the
car's seatbelt.
Type approval: E5 04191
Type approval: E5 04191
(L)
(L)
Volvo booster seat with backrest
(Volvo Booster Seat with backrest).
Volvo booster seat with backrest
(Volvo Booster Seat with backrest).
Type approval: E1 04301169
Type approval: E1 04301169
(UF)
(UF)
Booster cushion with and without
backrest (Booster Cushion with and
without backrest).
Booster cushion with and without
backrest (Booster Cushion with and
without backrest).
Type approval: E5 03139
Type approval: E5 03139
(UF)
(UF)
15-25 kg
Group 2/3
15-36 kg
Group 2/3
15-36 kg
Centre rear seat
L: Suitable for specific child seats. These child seats may be intended for use in a special car model, limited or semi-universal categories.
U: Suitable for universally approved child seats in this weight class.
UF: Suitable for front-facing universally approved child seats in this weight class.
B: Built-in child seats approved for this weight class.
34
01 Safety
Child safety
Child safety locks, rear doors
The controls for operating the rear door power
windows and the rear door opening handles
can be blocked from opening from the inside.
For more information, see page 60.
ISOFIX fixture system for child seats
Always follow the manufacturer's installation
instructions when connecting a child seat to
the ISOFIX mounting points.
Size classes
Child seats are in different sizes – cars are in
different sizes. This means that not all child
seats are suitable for all seats in all car models.
Consequently, there is a size classification for
child seats using the ISOFIX fixture system in
order to assist users in choosing the correct
child seat (see the following table).
Size
class
Mounting points for the ISOFIX fixture system
are located at the lower section of the rear seat
backrest, in the outer seats.
The location of the mounting points is indicated
by symbols in the backrest upholstery (see preceding illustration).
Description
A
Full size, front-facing child
seat
B
Reduced size (alt. 1), frontfacing child seat
B1
Reduced size (alt.2), frontfacing child seat
C
Full size, rear-facing child
seat
Size
class
01
Description
D
Reduced size, rear-facing
child seat
E
Rear-facing infant seat
F
Transverse infant seat, lefthand
G
Transverse infant seat, righthand
WARNING
Never place the child in the passenger seat
if the car is fitted with an activated airbag.
NOTE
If an ISOFIX child seat has no size classification, the car model must be included on
the vehicle list for the child seat.
NOTE
Volvo recommends that you contact an
authorised Volvo dealer for recommendations about which ISOFIX child seats Volvo
recommends.
35
01 Safety
01
Child safety
Types of ISOFIX child seat
Type of child seat
Infant seat transverse
Infant seat, rear-facing
Weight
max 10 kg
max 10 kg
Size class
Passenger seats for ISOFIX installation of child seats
Front seat
Outer rear seat
F
X
X
G
X
X
E
X
OK
(IL)
Infant seat, rear-facing
max 13 kg
E
X
OK
(IL)
D
X
OK
(IL)
C
X
OK
(IL)
Child seat, rear-facing
9-18 kg
D
X
OK
(IL)
C
X
OK
(IL)
36
01 Safety
Child safety
Type of child seat
Front-facing child seat
Weight
9-18 kg
Size class
B
01
Passenger seats for ISOFIX installation of child seats
Front seat
Outer rear seat
X
OKA
(IUF)
B1
X
OKA
(IUF)
A
X
OKA
(IUF)
X: The ISOFIX position is not suitable for ISOFIX child seats in this weight class and/or size class.
IL: Suitable for specific ISOFIX child seats. These child seats may be intended for use in a special car model, limited or semi-universal categories.
IUF: Suitable for front-facing ISOFIX child seats that are universally approved in this weight class.
A
Volvo recommends rear-facing child seats for this group.
``
37
01 Safety
01
Child safety
Upper mounting points for child seats
NOTE
In cars with a cargo cover over the luggage
compartment, this must be removed before
child seats can be attached to the securing
points.
For detailed information on how the child seat
should be tensioned in the upper mounting
points, see the seat manufacturer's instructions.
WARNING
The car is equipped with upper mounting
points for certain front-facing child seats.
These mounting points are located on the rear
of the seat.
The upper mounting points are primarily
intended for use with front-facing child seats.
Volvo recommends that small children should
sit in rear-facing child seats to as late an age
as possible.
NOTE
Fold the head restraints in order to facilitate
fitting this type of child seat in cars with
folding head restraints on the outer seats.
38
The child seat's straps must always be
drawn through the hole in the head restraint
leg before they are tensioned at the attachment point.
01 Safety
01
39
Remote control key/key blade................................................................
Battery replacement, remote control key/PCC*......................................
Keyless*..................................................................................................
Locking/unlocking...................................................................................
Child safety locks....................................................................................
Alarm*......................................................................................................
40
* Option/accessory, for more information, see Introduction.
42
48
50
54
60
61
LOCKS AND ALARM
02 Locks and alarm
Remote control key/key blade
General
02
The car is supplied with 2 remote control keys
or two remote control keys with keyless function. They are used to start the car and for locking and unlocking.
The remote control key contains a removable
key blade made of metal. The visible section is
available in two versions so that it is possible
to distinguish between the remote control
keys.
Additional remote control keys can be ordered
- up to 6 can be programmed and used for the
same car.
There are four remote control key variants:
•
•
•
•
Remote control key, standard1
Remote control key with Keyless start1
Remote control key with Keyless drive1
PCC with Keyless drive 2
For information on remote control key function
buttons see page 44.
PCC plus remote control key with keyless function has extended functionality compared to
the standard remote control key. The rest of
1
2
3
4
42
5-button key
6-button key
Only in combination with power driver's seat and power mirrors.
Only for cars with retractable power door mirrors.
this chapter describes functions available in all
variants.
WARNING
If there are children in the car:
Remember to switch off the supply to the
power windows by removing the remote
control key if the driver leaves the car.
Loss of a remote control key
If you lose a remote control key then a new one
can be ordered at a workshop - an authorised
Volvo workshop is recommended. The remaining remote control keys must then be taken to
the workshop. The code of the missing remote
control key must be erased from the system as
a theft prevention measure.
The current number of keys registered to the
car can be checked in the menu system MY
CAR under Information Number of keys.
For a description of the menu system, see
page 203.
Key memory3 - door mirrors, driver’s
seat and steering force
The settings are automatically connected to
each respective remote control key, see pages
82, 104 and 233.
The function can be activated/deactivated in
the menu system MY CAR under Settings
Car settings Car key memory.
For a description of the menu system, see
page 203.
For remote control keys with keyless function,
see page 50.
Indicator for locking/unlocking
When the car is locked or unlocked using the
remote control key, the direction indicators
confirm that locking/unlocking was correctly
performed.
• Locking - one flash and the door mirrors
are folded4 in.
• Unlocking - two flashes and the door mirrors are folded4 out.
02 Locks and alarm
Remote control key/key blade
NOTE
Lock indicator
Be aware of the risk of locking the remote
control key in the car.
Message
Specification
Insert car key
Error when reading
the remote control
key during starting Remove the key
from the ignition
switch, press it in
again and make a
new start attempt.
Car key not found
Error reading the
remote control key
during starting - Try
to start again.
When locking, indication is given only if all
locks have been locked and all doors are
closed. Indication is given when the last door
has been closed.
Selecting the function
Different options for indicating locking/unlocking with light can be set in the car's menu system, see page 203.
Same LED as alarm indicator, see page 61.
Search in the menu system MY CAR for
Settings Car settings Light settings
and select Door lock confirmation light and/
or Unlock confirmation light.
(Applicable only to
cars with Keyless.)
A flashing LED by the windscreen verifies that
the car is locked.
If the error persists:
Insert the remote
control key into the
ignition switch and
try to start again.
NOTE
Cars that are not equipped with alarm also
have this indicator.
Immobiliser
Each remote control key has a unique code.
The car can only be started with the correct
remote control key with the correct code.
The following error messages in the combined
instrument panel's information display are related to the electronic immobiliser:
02
Immobiliser Try to
start again
Error in immobiliser
system during starting. If the error persists: Contact a
workshop - an
authorised Volvo
workshop is recommended.
For starting the car, see page 112.
43
02 Locks and alarm
Remote control key/key blade
Functions
Press and hold (at least 4 seconds) to open all
windows simultaneously.
02
The function can be changed from unlocking
all doors simultaneously, to unlocking the driver's door only with one press of the button and,
after a further press of the button - within 10
seconds - unlocking the remaining doors.
5-button remote control key
Remote control key with PCC* - Personal Car
Communicator.
Information
Locking
Unlocking
Function buttons
Approach light duration
Locking – Locks the doors and tailgate
while the alarm is activated.
Tailgate
Panic function
Press and hold (at least 2 seconds) to close all
windows simultaneously.
WARNING
If windows are closed using the remote control key, check that nobody's hands are
trapped.
Unlocking – Unlocks the doors and tailgate while the alarm is deactivated.
44
* Option/accessory, for more information, see Introduction.
The function can be changed in the menu system MY CAR under Settings Car settings
Lock settings Doors unlock with both
the alternatives All doors and Driver door,
then all. For a description of the menu system,
see page 203.
Approach light duration – Used to switch
on the car's lighting at a distance. For more
information, see page 95.
Tailgate - Unlocks and disarms the alarm
for the tailgate only. For more information, see
page 56.
Panic function – Used to attract attention
in an emergency.
Press and hold the button for at least 3 seconds or press it twice within 3 seconds to activate the direction indicators and the horn.
The function can be turned off with the same
button once it has been active for at least
5 seconds. Otherwise the function switches off
automatically after 2 minutes and 45 seconds.
02 Locks and alarm
Remote control key/key blade
Range
Unique PCC functions*
If any of the other buttons are pressed
during this time then the reading is interrupted.
The remote control key's functions have a
range of about 20 m from the car.
If the car does not verify a button being pressed
- move closer and try again.
02
NOTE
If none of the indicator lamps illuminates with repeated use of the information
button and in different locations (as well as
after 7 seconds and after the light has travelled around on the PCC), contact a workshop - an authorised Volvo workshop is recommended.
NOTE
The remote control key functions may be
disrupted by surrounding radio waves,
buildings, topographical conditions, etc.
The car can always be locked/unlocked with
the key blade, see page 47.
Remote control key with PCC* - Personal Car
Communicator.
Indicator lamps display information in accordance with the following illustration:
Information button
Indicator lamps
Using the information button enables access to
certain information from the car via the indicator lamps.
Using the information button
–
Press the information button
.
> All indicator lamps flash for approximately 7 seconds and the light travels
around on the PCC. This indicates that
information from the car has been read.
Green continuous light – the car is locked.
Yellow continuous light – the car is
unlocked.
* Option/accessory, for more information, see Introduction.
45
02 Locks and alarm
Remote control key/key blade
Red continuous light – the alarm has been
triggered since the car was locked.
02
Red light flashing alternately in both indicator lamps – The alarm was triggered less
than 5 minutes ago.
Range PCC
The PCC's range for locking, unlocking and
tailgate is about 20 m from the car - for other
functions up to about 100 m.
If the car does not verify a button being pressed
- move closer and try again.
NOTE
The information button function may be disrupted by surrounding radio waves, buildings, topographical conditions, etc.
Out of PCC range
If the PCC is too far away from the car for the
information to be read then the status the car
was last left in is shown, without the light travelling around on the PCC.
If several PCCs are used for the car then it is
only the PCC last used for locking/unlocking
that shows correct status.
NOTE
If none of the indicator lamps illuminates with repeated use of the information
button and in different locations (as well as
after 7 seconds and after the light has travelled around on the PCC), contact a workshop - an authorised Volvo workshop is recommended.
doors can be locked manually, e.g. in the
event of power failure, see page 54.
• The glovebox lock* opens see page 56.
• the airbag for front passenger seat
(PACOS)* can be activated/deactivated,
see page 20.
Removing the key blade
Detachable key blade
A remote control key contains a detachable
key blade of metal with which some functions
can be activated and some operations carried
out.
The key blade's unique code is provided by
authorised Volvo workshops, which are recommended when ordering new key blades.
Key blade functions
Using the remote control key's detachable key
blade:
Slide the spring-loaded catch to the side.
• the left-hand front door can be opened
At the same time pull the key blade straight
out backwards.
manually if central locking cannot be activated with the remote control key, see
page 51.
• the rear doors' mechanical child safety
locks can be activated/deactivated, see
page 60.
46
• the right-hand front door and the rear
* Option/accessory, for more information, see Introduction.
Attaching the key blade
Carefully refit the key blade into its location in
the remote control key.
02 Locks and alarm
Remote control key/key blade
1. Hold the remote control key with the slot
pointed up and lower the key blade into its
slot.
02
2. Lightly press the key blade. You should
hear a "click" when the key blade is locked
in.
Unlocking doors with the key blade
If central locking cannot be activated with the
remote control key - e.g. if the batteries are
discharged - then the left-hand front door can
be opened as follows:
1. Unlock the left-hand front door with the key
blade in the door handle's lock cylinder.
See also the illustration and further information, see page 51.
NOTE
When the door has been unlocked using the
key blade and is opened, the alarm is triggered.
2. Deactivate the alarm by inserting the
remote control key in the ignition switch.
For a car with the Keyless system, see
page 51.
47
02 Locks and alarm
Battery replacement, remote control key/PCC*
Replacing the battery
02
Battery replacement
Closely study how the battery/batteries are
secured on the inside of the cover, with
regard to their (+) and (–) sides.
The batteries should be replaced if:
• the information symbol is illuminated and
the display shows Low battery in remote
control. Please change batteries.
Remote control key with 1 battery
and/or
1. Carefully prize out the battery.
• the locks repeatedly do not react to signals
2. Install a new one with the (+) side down.
from the remote control key within
20 metres from the car.
Opening
Slide the spring-loaded catch to the
side.
At the same time pull the key blade
straight out backwards.
Insert a 3 mm slot screwdriver in the
hole behind the spring-loaded catch and
gently prize the remote control key up.
NOTE
Turn the remote control key over with the
buttons facing up, this is to avoid the batteries falling out when it is opened.
IMPORTANT
Avoid touching new batteries and their contact surfaces with your fingers as this may
impair their function.
48
* Option/accessory, for more information, see Introduction.
Remote control key and PCC* with 2
batteries
1. Carefully prize out the batteries.
2. First install one new one with the (+) side
up.
3. Position the white plastic tab in between
and finally install a second new battery with
the (+) side down.
Battery type
Use batteries with designation CR2430, 3 V.
Assembly
1. Press the remote control key together.
2. Hold the remote control key with the slot
pointed up and lower the key blade into its
slot.
3. Lightly press the key blade. You should
hear a "click" when the key blade is locked
in.
02 Locks and alarm
Battery replacement, remote control key/PCC*
IMPORTANT
Make sure that exhausted batteries are disposed of in a manner which is kind to the
environment.
02
* Option/accessory, for more information, see Introduction.
49
02 Locks and alarm
Keyless*
Keyless lock and ignition system*
02
General
The car's electrical system can be set to 3 different levels (key positions) - 0, I and II - with
the remote control key, see page 79.
• a door has been opened and closed
• the remote control key has been inserted
Remote control key range1
• The OK button on the direction indicator
In order to open a door or the tailgate without
pressing a button on the remote control key, a
remote control key must be approx. 1.5 m from
the car door handle or tailgate. This means that
the person who wishes to lock or unlock a door
must have the remote control key with him or
her. It is not possible to lock or unlock a door
if the remote control key is on the opposite side
of the car.
Below is a description of remote control keys
with Keyless drive and Keyless start functions.
For cars with a Keyless start function, the car
can be started without the remote control key
being inserted in the ignition lock. For cars with
a Keyless drive function, the car can be locked
and unlocked without pressing a button on the
remote control key, and also be started without
the key being inserted in the ignition lock. The
system makes it easier and more convenient to
open the car, e.g. when your hands are full.
Both of the car's remote control keys have
Keyless function. It is possible to order more
remote control keys, see page 42.
1
50
The red rings in the preceding illustration indicate the range covered by the system's antennas.
If all remote control keys are removed from the
car when the engine is running or key position
I or II is active (see page 79) and a door has
been opened and then closed, the information
display shows a warning message while
sounding an audible reminder at the same
time.
When the remote control key has been
returned to the car, the warning message goes
off and the audible reminder ceases once
either/or:
Does not apply to cars with keyless start
* Option/accessory, for more information, see Introduction.
in the ignition lock
stalk.
Safe operation of the remote control key
with keyless function
If a remote control key with keyless function is
left in the car, it is deactivated temporarily
when the car is locked. This prevents unauthorised entry.
However, if someone breaks into the car and
finds the remote control key, it is reactivated. It
is therefore important to handle all remote control keys with great care.
IMPORTANT
When the door has been unlocked using the
key blade and is opened, the alarm is triggered.
Interference to remote control key
function
Electromagnetic fields and screening can interfere with the Keyless function.
02 Locks and alarm
Keyless*
NOTE
Do not place/store the remote control key
with keyless function near a mobile phone
or metal object - no closer than 10-15 cm.
If interference is experienced nonetheless, use
the remote control key and the key blade like a
traditional remote control key, see page 44.
Locking2
lock indicator in the windscreen confirms that
locking has been completed by starting to
flash, see page 43.
Lock the doors and the tailgate by grasping
one of the door handles or pressing the smaller
of the tailgate's two rubberised buttons - the
2
02
All doors and the tailgate must be closed
before the car can be locked - otherwise the
car is not locked.
NOTE
In cars with automatic gearbox selectors,
the gear selector must be set to the P position; otherwise the car can be neither locked
nor alarmed.
Unlocking2
Hole for key blade - to loosen the cover.
Unlocking with Keyless-drive takes place when
a hand grasps a door handle or the tailgate's
rubberised pressure plate is actuated - open
the door or tailgate as normal.
If central locking cannot be activated with the
remote control key - e.g. if the batteries are
discharged - then the left-hand front door can
be opened using the remote control key's
removable key blade (see page 46).
NOTE
Cars with the Keyless-drive system have a touchsensitive area on the outer handle of the doors and
a rubberised button next to the tailgate's rubberised pressure plate.
Unlocking with the key blade
The door handles normally register a hand
that takes hold of the handle, but with thick
gloves on or after a very quick hand movement a second attempt may be required, or
with the glove taken off.
To access the lock cylinder, the door handle's
plastic cover must be removed - this is also
done with the key blade:
1. Press the key blade approx. 1 cm straight
up into the hole on the underside of the
door handle/cover - do not prize.
> The plastic cover loosens automatically
by means of the torque when the blade
Not applicable to remote control keys with keyless start
* Option/accessory, for more information, see Introduction.
51
02 Locks and alarm
Keyless*
02
is pushed straight up and into the opening.
presses their remote control key's unlock
button, see page 44.
2. Then insert the key blade in the lock cylinder and unlock the door.
• Select one of three possible memories for
3. Refit the plastic cover after unlocking.
NOTE
When the front left door is unlocked using
the key blade and is opened, the alarm is
triggered. It is switched off by inserting the
remote control key in the ignition switch, see
page 61.
Key memory3 - driver’s seat, door
mirrors and steering force
Memory function in remote control key
with keyless function
If several people each with a remote control
key approach the car, then the settings for seat
and mirrors are implemented for the person
who opens the driver's door.
seat adjustment with seat button 1-3, see
page 82.
• Adjust seat and mirrors manually, see
page 82 and 104.
• Adjust steering force in the MY CAR menu
system; see see page 205.
Lock settings
The Keyless-drive function can be adapted by
indicating in the menu system MY CAR which
doors are to be unlocked, under Car settings
Lock settings Keyless entry - there
select between All doors unlock, Any door,
Doors on same side and Both front doors.
For a description of the menu system, see
page 203.
After the driver's door has been opened by
person A with remote control key A, but person
B with remote control key B is to drive, the settings can be changed as follows:
• Standing by the driver's door, or sitting
behind the steering wheel, person B
3
52
Antenna location
Only in combination with power driver's seat and power mirrors.
* Option/accessory, for more information, see Introduction.
The Keyless system has a number of integrated
antennae located around the car:
Rear bumper, centre
Door handle, left rear
Cargo area, central and furthest in under
the floor
Door handle, right rear
Centre console, under the rear section
Centre console, under the front section.
02 Locks and alarm
Keyless*
WARNING
People who have had a pacemaker operation should not come closer than 22 cm to
the Keyless system's antennas with their
pacemaker. This is to prevent interference
between the pacemaker and the Keyless
system.
02
* Option/accessory, for more information, see Introduction.
53
02 Locks and alarm
Locking/unlocking
From the outside
02
The remote control key can lock/unlock all
doors, the tailgate and the fuel filler flap. Different sequences for unlocking can be
selected, see "Unlocking with the remote control key" page 44.
In order that the lock sequence can be activated, the driver's door must be closed - if any
of the other doors or the tailgate is open, then
it/they is/are locked and the alarm is activated
only when it/they are closed. With the Keyless* system all the doors and tailgate must be
closed.
NOTE
Remember that the alarm is triggered when
the door is opened after being unlocked
with the key blade - the alarm is switched
off when the remote control key is inserted
into the ignition switch.
which must be depressed using the key blade
- they are then mechanically locked/blocked to
prevent them being opened from outside. The
doors can still be opened from the inside.
WARNING
Be aware of the risk of being locked in the
car when it is locked from the outside using
the remote control key - it is then not possible to open any of the doors from the
inside with the door controls. For more information, see page 58, Deadlocks.
NOTE
Be aware of the risk of locking the remote
control key in the car.
If it is not possible to lock/unlock with the
remote control key, the battery may be discharged - lock or unlock the left-hand front
door with the detachable key blade, see
page 46.
Automatic relocking
If none of the doors or the tailgate is opened
within 2 minutes of unlocking, all are locked
again automatically. This function reduces the
risk that the car is left unlocked unintentionally.
(For cars with alarm, see page 61.)
–
Manual locking
Remove the removable key blade from the
remote control key, see page 46. Insert the
key blade into the hole for the lock switch
and press in the key until it reaches the
bottom, approx. 12 mm.
In certain situations the car must be lockable
manually, e.g. in the event of power failure.
The door can be opened from both the
outside and the inside.
The left-hand front door can be locked with its
lock cylinder and the remote control key's
detachable key blade, see page 51.
The door is blocked against opening from
the outside. To return to position A, the
inner door handle must be opened.
Other doors have no lock cylinders and instead
have a lock switch on the end of each door
54
Manual locking of the door. Not to be mixed up
with child safety locks, see page 60.
* Option/accessory, for more information, see Introduction.
02 Locks and alarm
Locking/unlocking
NOTE
•
A door's lock reset only locks that particular door - not all doors simultaneously.
•
A manually locked rear door with an
activated manual child safety lock cannot be opened from either the outside
or the inside, see page 60. A rear door
that is locked in this way can only be
unlocked with the remote control key or
central locking button.
All of the doors and the tailgate can be locked
or unlocked simultaneously using the central
locking button on the driver's door.
• Press one side
the other side
of the button to lock to unlock.
Lamp in lock button
Central locking is available in two variants - the
lamp in the central locking button for the driver's door has different meanings dependent on
the variant.
With central locking button only in the driver's
door, other doors have no button:
From the inside
Central locking
• Illuminated lamp means that all doors are
locked.
With central locking button on both front doors
and electric lock button in each rear door:
• Illuminated lamp means that only that particular door is locked. When all buttons are
illuminated all doors are locked.
Unlocking
A door can be unlocked from the inside in two
different ways:
• Press the central locking button
Central locking.
.
Press and hold (at least 4 seconds) to also
open all the side windows* simultaneously.
• Pull the door handle and open the door the door is unlocked and opened in one
operation.
02
Locking
• Both front doors must be closed for the
central locking to be activated. Press the
central locking button
- all doors are
locked. If any of the rear doors is open, it
will lock when it is closed.
Press and hold (at least 2 seconds) to also
close all the side windows simultaneously.
Global opening
Press and hold the central locking button
(at least 4 seconds) to also open all the windows simultaneously - for example, to quickly
ventilate the passenger compartment during
hot weather.
Automatic locking
The doors and tailgate are locked automatically when the car starts to move.
The function can be activated/deactivated in
the menu system MY CAR under Settings
Car settings Lock settings Automatic
door locking. For a description of the menu
system, see page 203.
* Option/accessory, for more information, see Introduction.
55
02 Locks and alarm
Locking/unlocking
Lock cylinder, glovebox*
Tailgate
Manual opening
02
IMPORTANT
•
Minimal force is required to release the
rear hatch lock - just gently press the
rubberised panel.
•
Do not place the lift force on the rubber
panel when opening the rear hatch - lift
the handle. Using too much force may
damage the electrical contacts on the
rubber panel.
Unlocking with the remote control key
The glovebox can only be locked/unlocked
using the remote control key's detachable key
blade. For information on the key blade, see
page 46.
Locking the glovebox:
Insert the key blade in the glovebox lock
cylinder.
Turn the key blade 90 degrees clockwise.
The keyhole is horizontal in the locked
position.
Rubber plate with electrical contact.
The tailgate is held closed by an electrical lock.
To open:
1. Push down gently on the wider of the two
rubberised pressure plates under the outer
handle - the lock is released.
2. Lift the outside handle in order to fully open
the tailgate.
Pull out the key blade.
• Unlock by carrying this out in reverse
order.
56
* Option/accessory, for more information, see Introduction.
The alarm for the tailgate can be disarmed* and
the tailgate unlocked on its own by using the
button.
remote control key's
The lock indicator on the instrument panel
stops flashing in order to show that not all of
the car is locked and the alarm's* level and
02 Locks and alarm
Locking/unlocking
movement sensors and the sensors for opening the tailgate are disconnected.
•
The doors remain locked and armed.
The tailgate can be opened in two different
ways using the remote control key:
One press - The boot lid is unlocked, but
remains closed - press lightly on the rubberised
pressure plate under the outer handle and lift
the boot lid. If the tailgate is not opened within
2 minutes then it is relocked and the alarm is
re-armed.
Two presses - The boot lid is unlocked and the
lock is disengaged at which the boot lid opens
about a centimetre - lift the outer handle to
open. Rain, cold, frost or snow could however
prevent the tailgate from disengaging from the
lock.
> The lock releases and the tailgate opens
by a few centimetres.
NOTE
•
When the boot lid/tailgate is unlocked
with 2 presses or from the car interior,
automatic relocking does not take place
because the boot lid/tailgate is open - it
must be closed manually.
After the boot lid/tailgate has been
closed it is unlocked and the alarm is
not armed - relock it and re-arm the
alarm with the remote control key's lock
.
button
02
Locking with the remote control key
–
Press the remote control key's button for
locking,
, see page 44.
> The lock indicator on the instrument
panel starts flashing, which means that
the car is locked and the alarm* has
been activated.
Fuel filler flap
Opening the car from inside
The fuel filler flap is unlocked using the remote
control key
button. The fuel filler flap
remains unlocked until the car is locked with
the remote control key
button. If the car is
locked during travel or with the interior buttons,
the fuel filler flap will remain unlocked.
The fuel filler flap locking logic also follows the
locking or unlocking of the keyless-drive and
the central locking system. Fuel filler flap locking always occurs after a 10-minute delay.
To open the tailgate:
–
Press the lighting panel button.
* Option/accessory, for more information, see Introduction.
57
02 Locks and alarm
Locking/unlocking
Deadlocks*1
02
Temporary deactivation
Deadlocks means that all door handles are
mechanically disengaged, which prevents
doors being opened from the inside.
The deadlocks are activated with the remote
control key and are set after an approximately
10 second delay after the doors have been
locked.
2. Select Activate once.
> The instrument panel display shows the
message Reduced guard See
manual and the deadlocks function is
switched off when the car is locked.
or
–
NOTE
If a door is opened within the delay time then
the sequence is interrupted and the alarm is
deactivated.
Active menu options are indicated with a cross.
MY CAR
The car can only be unlocked from a deadlock
state with the remote control key. The front left
door can also be unlocked with the detachable
key blade.
OK MENU
If the deadlocks function shall be switched
off
TUNE knob control
–
EXIT
WARNING
Do not allow anyone to remain in the car
without first deactivating the deadlocks in
order to avoid the risk of anyone being
locked in.
1
58
If someone is going to stay in the car but the
doors must be locked from the outside, then
the deadlocks function can be temporarily
switched off. This is carried out as follows:
1. Access the menu system MY CAR under
Settings Car settings Reduced
Guard (for a detailed description of the
menu system, see page 203).
Only in combination with alarm.
* Option/accessory, for more information, see Introduction.
Select Ask when exiting.
> Each time the engine is switched off the
centre console display screen shows
the message Activate Reduced Guard
until engine has started again? followed by the alternatives Confirm with
OK and Cancel with EXIT.
Press OK/MENU and lock the car. (Note
that the alarm's movement and tilt detectors* are switched off at the same time, see
page 61.)
> The next time the engine is started, the
system is reset to zero and the instrument panel display shows the message
Full guard at which the deadlocks
function and the alarm's movement and
tilt detectors are re-engaged.
02 Locks and alarm
Locking/unlocking
If the locking system shall not be changed
–
Press EXIT and lock the car.
02
NOTE
•
Remember that the alarm is activated
when the car is locked.
•
If any of the doors are opened from the
inside then the alarm is triggered.
59
02 Locks and alarm
Child safety locks
Manual blocking of the rear doors
02
The child safety locks prevent children from
opening a rear door from the inside.
NOTE
•
A door's knob control only blocks that
particular door - not both rear doors
simultaneously.
•
Cars with an electric child safety lock do
not have a manual child lock.
Electrical locking of the rear doors*
and power windows
1. Start the engine or choose a key position
higher than 0.
2. Press the button in the driver's door control
panel.
> The information display shows the message Rear child lock activated and
the button's lamp illuminates - the locks
are active.
When the electric child safety lock is active
then the rear:
• windows can only be opened with the driver's door control panel
•
The current setting is stored when the engine
is switched off - if the child safety locks are
activated at engine shutdown, the function will
remain activated the next time the engine is
started.
With child safety locks. Not to be mixed up with
manual door locks, see page 54.
The child safety locks are located on the trailing
edge of the rear doors and are only accessible
when the doors are open.
To activate/deactivate the child safety locks:
–
Use the remote control key's detachable
key blade to turn the knob - see page 46.
The door is blocked against opening from
the inside.
The door can be opened from both the
outside and the inside.
Control panel driver's door.
The child safety locks can be activated/deactivated in all key positions higher than 0 - see
page 79. Activation/deactivation can be performed up to 2 minutes after switching off the
engine, provided that no door is opened.
To activate the child safety locks:
60
doors cannot be opened from inside.
* Option/accessory, for more information, see Introduction.
02 Locks and alarm
Alarm*
General
Activated alarm is triggered if:
• a door, the bonnet or the tailgate is opened
• a movement is detected in the passenger
compartment (if fitted with a movement
detector*)
• the car is raised or towed away (if fitted
Arming the alarm
NOTE
Do not attempt to repair or alter components in the alarm system yourself. Any such
attempts may affect the terms of the insurance.
02
Deactivate the alarm
–
–
• the battery's cable is disconnected
• the siren is disconnected.
If there is a fault in the alarm system, the information display shows a message. In which
case, contact a workshop - an authorised
Volvo workshop is recommended.
Press the remote control key unlock button.
Press the remote control key unlock button
or insert the remote control key in the ignition switch.
Other alarm functions
Automatic re-arming of the alarm
This function prevents the car being left with
the alarm disarmed unintentionally.
NOTE
To avoid this: Close the window when leaving the car. If the car's integrated passenger
compartment heater (or a portable electric
heater) shall be used - direct the airflow from
the air vents so that they are not pointing
upwards in the passenger compartment.
Press the remote control key lock button.
Deactivating a triggered alarm
Alarm indicator
with a tilt detector*)
The movement sensors trigger an alarm in
the event of movement in the passenger
compartment - air currents are also registered. For this reason the alarm is triggered
if the car is left with a window open or if the
passenger compartment heater is used.
–
Same LED as lock indicator, see page 43.
A red LED on the instrument panel indicates
the alarm system's status:
• LED not lit – Alarm not armed
• The LED flashes once every other second
– Alarm is armed
• The LED flashes rapidly after disarming the
alarm (and until the remote control key is
inserted in the ignition switch and key position I is selected) – Alarm has been triggered.
If the car is unlocked with the remote control
key (and the alarm is disarmed) but none of the
doors or the tailgate is opened within 2
minutes, then the alarm is automatically rearmed. The car is relocked at the same time.
Automatic alarm activation
In certain countries, the alarm is activated after
a certain delay if the driver's door was opened
and closed but the car was not re-locked.
Remote control key not working
If the alarm cannot be deactivated with the
remote control key, e.g. if the key's battery is
* Option/accessory, for more information, see Introduction.
61
02 Locks and alarm
Alarm*
battery and works independently of the car
battery.
discharged - the car can be unlocked, disarmed and the engine started as follows:
02
1. Open the left-hand front door with the
detachable key blade - see page 51.
> The alarm is triggered, the direction indicators flash and the siren sounds.
• The direction indicators flash for 5 minutes
or until the alarm is switched off.
Reduced alarm level
To avoid accidental triggering of the alarm e.g. if a dog is left in a locked car or during
transport on a car train or car ferry - temporarily
deactivate the movement and tilt detectors.
The procedure is the same as with the temporary disengaging of deadlocks, see page 58.
2. Insert the remote control key in the ignition
switch.
> The alarm is deactivated.
Alarm signals
When the alarm is triggered, the following happens:
• A siren sounds for 30 seconds or until the
alarm is switched off. The siren has its own
62
* Option/accessory, for more information, see Introduction.
02 Locks and alarm
02
63
Instruments and controls........................................................................ 66
Volvo Sensus ......................................................................................... 77
Key positions.......................................................................................... 79
Seats....................................................................................................... 81
Steering wheel........................................................................................ 86
Lighting................................................................................................... 87
Wipers and washing................................................................................ 99
Windows, rearview and door mirrors.................................................... 102
Compass*.............................................................................................. 107
Alcolock*............................................................................................... 108
Starting the engine................................................................................ 112
Starting the engine – external battery................................................... 114
Gearboxes............................................................................................. 115
Eco Guide & Power*.............................................................................. 121
Start/Stop *........................................................................................... 123
Foot brake............................................................................................. 129
Parking brake........................................................................................ 131
HomeLinkŸ *.......................................................................................... 132
64
* Option/accessory, for more information, see Introduction.
YOUR DRIVING ENVIRONMENT
03 Your driving environment
Instruments and controls
Instrument overview
03
Left-hand drive.
66
03 Your driving environment
Instruments and controls
Function
Page
Function
Page
Menus and messages, direction
indicators, main/
dipped beam, trip
computer
87, 93, 200,
229
Control for infotainment and menu
control
203, 241, 243
Control panel for
climate control
215
Cruise control
145, 147
Gear selector
115
Horn, airbags
18, 86
Parking brake
131
Combined instrument panel
69, 75
Wipers and washing
99, 100
Menu, audio and
phone control
203, 241, 267,
243
Steering wheel
adjustment
86
START/STOP
ENGINE button
112
Bonnet opener
328
Ignition switch
79
Light switch,
opener for tailgate
56, 87
Display for infotainment and menus
203, 241, 241
Seat adjustment*
82
Door handle
–
Control panel
55, 60, 102,
104
Hazard warning
flashers
92
03
``
* Option/accessory, for more information, see Introduction.
67
03 Your driving environment
Instruments and controls
03
Right-hand drive.
68
03 Your driving environment
Instruments and controls
Function
Page
Function
Page
Wipers and washing
99, 100
Control panel for
climate control
215
Menu, audio and
phone control
203, 241, 267,
243
Gear selector
115
Parking brake
131
Horn, airbags
17, 86
Combined instrument panel
69, 75
87, 93, 200,
229
Cruise control
145, 147
Menus and messages, direction
indicators, main/
dipped beam, trip
computer
START/STOP
ENGINE button
112
Steering wheel
adjustment
86
Ignition switch
79
Bonnet opener
328
Display for infotainment and menus
203, 241, 241
Light switch and
tailgate opener
56, 87
Door handle
–
Seat adjustment*
82
Control panel
55, 60, 102,
104
Hazard warning
flashers
92
Control for infotainment and menu
control
Information displays
03
Information display, analogue instrument panel.
Information displays, digital instrument panel.
203, 241, 243
The combined instrument panel's information
displays show information on some of the car's
functions, e.g. cruise control, trip computer
``
* Option/accessory, for more information, see Introduction.
69
03 Your driving environment
Instruments and controls
and messages. The information is shown with
text and symbols.
There are further descriptions under the functions that use the information displays.
03
Gauges and indicators, analogue
instrument panel
Tachometer. The meter indicates engine
speed in thousands of revolutions per
minute (rpm).
Gearchange indicator1 / Gear position indicator2. See also page 286.
Gauges and indicators, digital
instrument panel
Various themes can be selected for the digital
combined instrument panel Possible themes
are Elegance, Eco and Performance.
To change to a different theme, press the left
stalk switch's OK button and then select the
Themes menu option by turning the thumbwheel on the lever. Confirm your choice by
pressing the OK button. For more information
on menus, see page 200.
Fuel gauge. See also Trip computer, page
229, and Refuelling, page 289.
EcoGuide. See also page 121.
Speedometer
1
2
3
4
70
Manual gearbox
Automatic gearbox
Manual gearbox
Automatic gearbox
Meters and indicators, Elegance.
Fuel gauge. See also Trip computer, page
229, and Refuelling, page 289.
Temperature gauge for engine coolant
Speedometer
Tachometer. The meter indicates engine
speed in thousands of revolutions per
minute (rpm).
Gearchange indicator3 / Gear position indicator4. See also page 286.
03 Your driving environment
Instruments and controls
Indicator and warning symbols
03
Meters and indicators, Eco.
3
4
5
Meters and indicators, Performance.
Fuel gauge. See also Trip computer, page
229, and Refuelling, page 289.
Fuel gauge. See also Trip computer, page
229, and Refuelling, page 289.
EcoGuide. See also page 121.
Temperature gauge for engine coolant
Indicator symbols
Speedometer
Speedometer
Indicator and warning symbols
Tachometer. The meter indicates engine
speed in thousands of revolutions per
minute (rpm).
Tachometer. The meter indicates engine
speed in thousands of revolutions per
minute (rpm).
warning symbols5
Gearchange indicator3 / Gear position indicator4. See also page 286.
PowerMeter. See also page 121.
Indicator and warning symbols, analogue instrument panel.
Gearchange indicator3 / Gear position indicator4. See also page 286.
Manual gearbox
Automatic gearbox
For certain engine variants, the symbol for low oil pressure is not used. Warnings are made via display text. For information on checking the oil level, see page 329.
``
71
03 Your driving environment
Instruments and controls
symbol for faults in the car's emissions system
and the symbol for low oil pressure.
Symbol
Left-hand direction indicators
Indicator symbols
Symbol
Specification
Right-hand direction indicators
ABL fault
03
DRIVe - Start/Stop, the engine
auto-stopped, see page 123
Emissions system
ABS fault
Indicator and warning symbols, digital instrument
panel.
Rear fog lamp on
Indicator symbols
Indicator and warning symbols
Warning symbols5
Functionality check
All indicator and warning symbols illuminate in
key position II or when the engine is started.
When the engine has started, all the symbols
should go out except the parking brake symbol, which only goes out when the brake is disengaged.
If the engine does not start or if the functionality
check is carried out in key position II then all
symbols go out within 5 seconds except the
5
72
Specification
Stability system
Stability system, sport mode
ABL fault
The symbol illuminates if a fault has arisen in
the ABL function (Active Bending Lights).
Emissions system
If the symbol illuminates then it may be due to
a fault in the car's emissions system. Drive to
a workshop for checking. Volvo recommends
that you seek assistance from an authorised
Volvo workshop.
Engine preheater (diesel)
ABS fault
Low level in fuel tank
If this symbol illuminates then the system is not
working. The car's regular brake system continues to work, but without the ABS function.
Information, read display text
1. Stop the car in a safe place and turn off the
engine.
Main beam On
2. Restart the engine.
3. If the symbol remains illuminated, drive to
a workshop to have the ABS system
For certain engine variants, the symbol for low oil pressure is not used. Warnings are made via display text. For information on checking the oil level, see page 329.
03 Your driving environment
Instruments and controls
checked. Volvo recommends that you
seek assistance from an authorised Volvo
workshop.
Rear fog lamp on
This symbol illuminates when the rear fog lamp
is on. The rear fog lamp is made up of two
bulbs.
Stability system
A flashing symbol indicates that the stability
system is operating. If the symbol illuminates
with constant glow then there is a fault in the
system.
Stability system, Sport mode
Sport mode allows for a more active driving
experience. The system then detects whether
the accelerator pedal, steering wheel movements and cornering are more active than in
normal driving and then allows controlled skidding of the rear section up to a certain level
before it intervenes and stabilises the car.
Engine preheater (diesel)
Information, read display text
Symbol
Specification
Low oil pressureA
Parking brake
applied
03
Parking brake
applied, alternative
symbol
NOTE
Airbags – SRS
When a service message is shown, the symbol and message are cleared using the OK
button, or disappear automatically after a
time.
Seatbelt reminder
Alternator not
charging
Main beam On
The symbol illuminates when main beam is on
and with main beam flash.
Fault in brake system
Left/right-hand direction indicators
This symbol illuminates during engine preheating. Preheating mostly takes place due to low
temperature.
Both direction indicator symbols flash when
the hazard warning flashers are used.
Low level in fuel tank
The symbol shines when the engine is autostopped.
When the symbol illuminates the level in the
fuel tank is low, refuel as soon as possible.
Warning symbols
When one of the car's systems does not
behave as intended, this information symbol
illuminates and a text appears on the information display. The message text is cleared with
the OK button, see page 200, or it disappears
automatically after a time (time depending on
which function is indicated). The information
symbol can also illuminate in conjunction with
other symbols.
DRIVe – Start/Stop
Warning
A
For certain engine variants, the symbol for low oil pressure
is not used. Warnings are made via display text, see pages
329 and 331.
Low oil pressure
If this symbol illuminates during driving then
the engine's oil pressure is too low. Stop the
engine immediately and check the engine oil
level, top up if necessary. If the symbol illumi-
73
03 Your driving environment
Instruments and controls
nates and the oil level is normal, contact a
workshop. Volvo recommends that you seek
assistance from an authorised Volvo workshop.
Parking brake applied
03
This symbol illuminates with a constant glow
when the parking brake is applied. The symbol
is illuminated during application. For more
information, see page 131.
Airbags – SRS
If this symbol remains illuminated or illuminates
while driving, it means a fault has been
detected in the seatbelt buckle, SRS, SIPS, or
IC systems. Drive immediately to a workshop
to have the system checked. Volvo recommends that you seek assistance from an
authorised Volvo workshop.
Seatbelt reminder
This symbol illuminates if someone in a front
seat has not put on their seatbelt or if someone
in a rear seat has taken off their seatbelt.
Alternator not charging
This symbol illuminates during driving if a fault
has occurred in the electrical system. Visit a
workshop. Volvo recommends that you seek
assistance from an authorised Volvo workshop.
74
Fault in brake system
If this symbol illuminates, the brake fluid level
may be too low. Stop the car in a safe place
and check the level in the brake fluid reservoir,
see page 333.
If the brake and ABS symbols illuminate at the
same time, there may be a fault in the brake
force distribution system.
1. Stop the car in a safe place and turn off the
engine.
2. Restart the engine.
• If both symbols extinguish, continue
WARNING
If the brake fluid is below the MIN level in
the brake fluid reservoir, do not drive further
before topping up the brake fluid.
The loss of brake fluid must be investigated
by a workshop. Volvo recommends that you
contact an authorised Volvo workshop.
WARNING
If the BRAKE and ABS symbols are lit at the
same time, there is a risk that the rear end
will skid during heavy braking.
driving.
•
If the symbols remain illuminated, check
the level in the brake fluid reservoir, see
page 333. If the brake fluid level is normal but the symbols are still illuminated,
the car can be driven, with great care, to
a workshop to have the brake system
checked. Volvo recommends that you
seek assistance from an authorised
Volvo workshop.
Warning
The red warning symbol illuminates when a
fault has been indicated which could affect the
safety and/or driveability of the car. An explanatory text is shown on the information display
at the same time. The symbol remains visible
until the fault has been rectified but the text
message can be cleared with the OK button,
see page 200. The warning symbol can also
illuminate in conjunction with other symbols.
Action:
1. Stop in a safe place. Do not drive the car
further.
03 Your driving environment
Instruments and controls
2. Read the information on the information
display. Implement the action in accordance with the message in the display. Clear
the message using the OK button.
Trip meter
Clock
Reminder – doors not closed
If one of the doors, the bonnet6 or tailgate is not
closed properly then the information or warning symbol illuminates together with an explanatory text message in the combined instrument
panel. Stop the car in a safe place as soon as
possible and close the door, bonnet or boot lid,
whichever is open.
If the car is driven at a speed lower than
approx. 7 km/h then the information
symbol illuminates.
If the car is driven at a speed higher
than approx. 7 km/h then the warning
symbol illuminates.
03
Trip meter.
Display for trip
Clock, digital instrument panel.
Display for showing the time8
meter7
The two trip meters T1 and T2 are used for
measuring short distances. The distance is
shown in the display.
Set the clock
The clock can be set in the menu group MY
CAR, for more information see page 203.
Turn the left stalk switch thumbwheel to show
the required meter.
One long press (more than 1 second) on the left
stalk switch RESET button resets the trip
meter currently displayed. A longer press (4
seconds) resets the trip computer if the car is
fitted with a digital instrument panel. For more
information, see page 229.
6
7
8
Only cars with alarm*.
The appearance of the display may vary depending on variant.
The time is shown in the middle of the instrument panel when an analogue instrument panel is fitted.
``
* Option/accessory, for more information, see Introduction.
75
03 Your driving environment
Instruments and controls
RSI*
03
The function RSI (Road Sign Identification)
helps the driver to see road signs containing
information on current speed, that a motorway
or road is starting/ending and when overtaking
is prohibited. For detailed information on RSI,
see page 141.
Combined Instrument Panel Software
"Combined Instrument Panel Software:
Portions of this software are copyright š 2.4.3
The FreeTypeProject (www.freetype.org). All
rights reserved."
76
* Option/accessory, for more information, see Introduction.
03 Your driving environment
Volvo Sensus
General
the car can be personalised by means of an
intuitive user interface. Settings can be made
in Car settings, Infotainment, Climate, etc.
With the centre console buttons and controls
or the steering wheel's right-hand keypad*
functions can be activated or deactivated and
many different settings can be made.
With a press on MY CAR all settings related to
the driving and control of the car are presented,
such as City Safety, Locks and alarm, setting
the clock, etc.
Control panel in centre console
Navigation* - NAV, see separate owner's
manual (Road and Traffic Information System - RTI).
Infotainment (RADIO, MEDIA, TEL*), see
page 241.
Car settings - MY CAR, see page 203.
With a press on the respective function:
RADIO, MEDIA, TEL*, NAV* and CAM* other
sources, systems and functions can be activated, e.g. AM, FM1, CD, DVD*, TV*, Bluetooth*, navigation* and park assist camera*.
For more information on all functions/systems,
see the respective section in the owner's manual.
Climate control, see page 212.
Sensus software
Park assist camera - CAM*, see
page 187.
This software uses parts of sources from clib2
and Prex Embedded Real-time OS - Source
(Copyright (c) 1982, 1986, 1991, 1993, 1994),
and Quercus Robusta (Copyright (c) 1990,
1993), The Regents of the University of
California. All rights reserved. (c) UNIX System
Laboratories, Inc. All or some portions are
derived from material licensed to the University
Volvo Sensus is the car's operating system, the
heart of your personal Volvo experience. Volvo
Sensus combines and presents many functions in several of the car's systems on the
centre console TV screen. With Volvo Sensus
of California by American Telephone and
Telegraph Co. or Unix System Laboratories,
Inc. and are reproduced herein with the
permission of UNIX System Laboratories, Inc.
Redistribution and use in source and binary
forms, with or without modification, are
permitted provided that the following
conditions are met: Redistributions of source
code must retain the above copyright notice,
this list of conditions and the following
disclaimer. Redistributions in binary form must
reproduce the above copyright notice, this list
of conditions and the following disclaimer in
the documentation and/or other materials
provided with the distribution. Neither the
name of the <ORGANIZATION> nor the names
of its contributors may be used to endorse or
promote products derived from this software
without specific prior written permission. THIS
SOFTWARE IS PROVIDED BY THE
COPYRIGHT HOLDERS AND
CONTRIBUTORS "AS IS" AND ANY EXPRESS
OR IMPLIED WARRANTIES, INCLUDING, BUT
NOT LIMITED TO, THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND
FITNESS FOR A PARTICULAR PURPOSE ARE
DISCLAIMED. IN NO EVENT SHALL THE
COPYRIGHT OWNER OR CONTRIBUTORS
BE LIABLE FOR ANY DIRECT, INDIRECT,
INCIDENTAL, SPECIAL, EXEMPLARY, OR
CONSEQUENTIAL DAMAGES (INCLUDING,
BUT NOT LIMITED TO, PROCUREMENT OF
03
``
* Option/accessory, for more information, see Introduction.
77
03 Your driving environment
Volvo Sensus
03
SUBSTITUTE GOODS OR SERVICES; LOSS
OF USE, DATA, OR PROFITS; OR BUSINESS
INTERRUPTION) HOWEVER CAUSED AND
ON ANY THEORY OF LIABILITY, WHETHER IN
CONTRACT, STRICT LIABILITY, OR TORT
(INCLUDING NEGLIGENCE OR OTHERWISE)
ARISING IN ANY WAY OUT OF THE USE OF
THIS SOFTWARE, EVEN IF ADVISED OF THE
POSSIBILITY OF SUCH DAMAGE.
This software is based in part on the work of
the Independent JPEG Group.
This software uses parts of sources from
"libtess". The Original Code is: OpenGL
Sample Implementation, Version 1.2.1,
released January 26, 2000, developed by
Silicon Graphics, Inc. The Original Code is
Copyright (c) 1991-2000 Silicon Graphics, Inc.
Copyright in any portions created by third
parties is as indicated elsewhere herein. All
Rights Reserved. Copyright (C) [1991-2000]
Silicon Graphics, Inc. All Rights Reserved.
Permission is hereby granted, free of charge,
to any person obtaining a copy of this software
and associated documentation files (the
"Software"), to deal in the Software without
restriction, including without limitation the
rights to use, copy, modify, merge, publish,
distribute, sublicense, and/or sell copies of the
Software, and to permit persons to whom the
Software is furnished to do so, subject to the
following conditions: The above copyright
78
notice including the dates of first publication
and either this permission notice or a reference
to http://oss.sgi.com/projects/FreeB/ shall be
included in all copies or substantial portions of
the Software. THE SOFTWARE IS PROVIDED
"AS IS", WITHOUT WARRANTY OF ANY KIND,
EXPRESS OR IMPLIED, INCLUDING BUT NOT
LIMITED TO THE WARRANTIES OF
MERCHANTABILITY, FITNESS FOR A
PARTICULAR PURPOSE AND
NONINFRINGEMENT. IN NO EVENT SHALL
SILICON GRAPHICS, INC. BE LIABLE FOR
ANY CLAIM, DAMAGES OR OTHER
LIABILITY, WHETHER IN AN ACTION OF
CONTRACT, TORT OR OTHERWISE, ARISING
FROM, OUT OF OR IN CONNECTION WITH
THE SOFTWARE OR THE USE OR OTHER
DEALINGS IN THE SOFTWARE. Except as
contained in this notice, the name of Silicon
Graphics, Inc. shall not be used in advertising
or otherwise to promote the sale, use or other
dealings in this Software without prior written
authorization from Silicon Graphics, Inc.
This software is based in parts on the work of
the FreeType Team.
This software uses parts of SSLeay Library:
Copyright (C) 1995-1998 Eric Young
([email protected]). All rights reserved
03 Your driving environment
Key positions
Insert and remove the remote control
key
IMPORTANT
Level
Foreign objects in the ignition switch can
impair the function or destroy the lock.
0
Do not press in the remote control key incorrectly turned - Hold the end with the detachable key blade, see page 46.
Withdraw the key
• Push the remote control key, allow it to
The audio system can be used for
a limited time - see page 240.
I
Sun visor for glass roof, power
windows, 12 V socket in the passenger compartment, RTI, phone,
ventilation fan and windscreen
wipers can be used.
II
The headlamps come on.
Functions at different levels
NOTE
For cars with the Keyless* function the key
does not need to be inserted into the ignition
switch but can be stored in e.g. a pocket.
For more information on Keyless functions see page 50.
Insert the key
1. Hold the end of the remote control key with
the detachable key blade and insert the key
in the ignition switch.
In order to enable the use of a limited number
of functions with the engine switched off, the
car's electrical system can be set in 3 different
levels (key positions) - 0, I and II - with the
remote control key. Throughout this owner's
manual these levels are described using the
denomination "key positions".
The following table shows the functions available in each key position/level.
Odometer, clock and temperature gauge are illuminated.
Power seats can be adjusted.
eject, then pull it out from the ignition
switch.
Ignition switch with remote control key extracted/
inserted.
Functions
03
Warning/indicator lamps illuminate for 5 seconds.
Several other systems are activated. However, heating in seat
cushions and the rear window
can only be activated after the
engine has been started.
This key position consumes a
lot of current from the starter
battery and should therefore be
avoided!
2. Then press the key in the lock up to its end
position.
* Option/accessory, for more information, see Introduction.
79
03 Your driving environment
Key positions
Choosing key position/level
Starting and stopping the engine
Key position 0
For information about starting/switching off the
engine - see page 112.
• Unlock the car - this means that the car's
electrical system is at level 0.
Key position I
03
• With the remote control key fully inserted
Towing
For important information about the remote
control key during towing - see page 305.
into the ignition switch1 - Briefly press
START/STOP ENGINE.
NOTE
To reach level I or II without starting the
engine - do not depress the brake/clutch
pedal when these key positions are due to
be selected.
Key position II
• With the remote control key fully inserted
into the ignition switch1 - Give a long2 press
on START/STOP ENGINE.
Back to key position 0
• To return to key position 0 from position II
and I - Briefly press on START/STOP
ENGINE.
Audio system
For information on the audio system's functions with remote control key removed - see
page 240.
1
2
80
Not necessary for cars with the Keyless* function.
Approx. 2 seconds.
* Option/accessory, for more information, see Introduction.
03 Your driving environment
Seats
Front seats
WARNING
Adjust the position of the driver's seat
before setting off, never while driving. Make
sure that the seat is in locked position in
order to avoid personal injury in the event of
sudden braking or an accident.
The head restraint can be adjusted in three different positions.
Lowering the front seat backrest
03
Adjusting front seat head restraints
To adjust lumbar support*, turn the
wheel1.
Forward/backward: lift the handle to adjust
the distance to the steering wheel and pedals. Check that the seat is locked after
changing position.
To raise/lower the front edge of seat cushion*, pump up/down.
Adjust backrest rake, turn the wheel.
Raise/lower the seat*, pump up/down.
Control panel for power seat*.
1
The passenger seat backrest can be folded
forward to make room for long loads.
Move the seat as far back/down as possible.
The height of the front seat head restraints can be
adjusted.
Adjust the head restraint based on the person's
height so that the whole of the back of the head
is covered if possible.
To adjust the height, the button (see illustration)
must be pressed while the restraint is moved
up or down.
Adjust the backrest to an upright position.
Lift the catches on the rear of the backrest
and fold it forward.
4. Push the seat forward so that the head
restraint "locks" in under the glovebox.
Raising takes place in reverse order.
Also applies to power seat.
* Option/accessory, for more information, see Introduction.
81
03 Your driving environment
Seats
WARNING
Do not use the space behind the front seat,
or the rear seat's centre seat, when the front
seat backrest is lowered.
03
WARNING
Grasp the backrest and make sure that it is
properly locked after being folded up in
order to avoid personal injury in the event of
sudden braking or an accident.
Power seat*
The power front seats have overload protection
which is tripped if a seat is blocked by an
object. If this happens, go to key position I or
0 and wait a short time before adjusting the
seat again.
Only one movement (forward/back/up/down)
can be made at a time.
Preparations
The seats can be adjusted for a certain time
after unlocking the door with the remote control key without the key in the ignition switch.
Seat adjustment is normally made in key position I and can always be made when the engine
is running.
Seat with memory function*
Front edge of seat cushion up/down
Seat forward/backward and up/down
Backrest rake
82
* Option/accessory, for more information, see Introduction.
Store setting
Memory button
Memory button
Memory button
Button for storing settings
1. Adjust the seat and the door mirrors.
2. Hold the button depressed to store settings while depressing one of the memory
buttons.
Using a stored setting
Hold one of the memory buttons depressed
until the seat and the door mirrors stop. If you
release the button then the movement of the
seat will stop.
03 Your driving environment
Seats
Key memory* in remote control key2
control key's memory (if the seat has been
moved since you locked the car).
The key memory can be activated/deactivated
in the menu system MY CAR under Settings
Car settings Car key memory. For a
description of the menu system, see
page 203.
Rear seats
Head restraint, centre seat, rear
03
Emergency stop
If the seat accidentally begins to move, press
one of the setting buttons for the seat or memory buttons in order to stop the seat.
All remote control keys can be used by different drivers to store the settings for the driver's
seat and door mirrors3. Proceed as follows:
• Adjust the seat as you want it.
• Lock the car by pressing the lock button on
the remote control key that you normally
use. This stores the positions of the seat
and door mirrors in the remote control
key's memory4.
• Unlock the car (by pressing the unlock button on the same remote control key) and
open the driver's door. The driver's seat
and door mirrors will automatically adopt
the positions that are stored in the remote
2
3
4
Restarting to reach the seat position stored in
the key memory is performed by pressing the
unlock button on the remote control key. The
driver's door must then be open.
WARNING
Risk of crushing! Make sure that children do
not play with the controls. Check that there
are no objects in front of, behind or under
the seat during adjustment. Ensure that
none of the rear seat passengers is in danger of becoming trapped.
Adjust the head restraint according to passenger height so that the whole of the back of the
head is covered if possible. Slide it up as
required.
To lower the head restraint again, the button
(see illustration) must be pressed while the
restraint is carefully moved down.
The head restraint can be adjusted in five different positions.
Heated seats
For heated seats, see page 217.
For key memory for Keyless function, see page 52.
Only if the car is equipped with power seat with memory and retractable power door mirrors.
This setting does not affect settings that have been stored in the power seat's memory function.
* Option/accessory, for more information, see Introduction.
83
03 Your driving environment
Seats
NOTE
Do not sit in the centre seat with the head
restraint in fully lowered position.
03
Manual lowering of the outer head
restraints, rear seat
Lowering the rear seat backrest
IMPORTANT
When the backrest is to be folded, the rear
seat cup holder must not be open and there
must be no objects in the rear seat. Nor may
the seat belts be connected. Otherwise
there is a risk of damage to the rear seat
upholstery.
The two-section backrest can be folded in different ways.
NOTE
The front seats may need to be pushed forwards, and/or the backrests adjusted
upwards, in order that the rear backrests
can be folded forward fully.
Pull the locking handle closest to the head
restraint to fold the head restraint forward.
The head restraint is moved back manually.
WARNING
The head restraint must be in locked position after being folded up.
84
• Both sections can be folded separately.
• If the entire backrest is to be folded then
the different sections should be folded
separately.
If the right-hand section is being lowered release and adjust the centre seat head
restraint downwards, see page 83.
The outer head restraints are lowered automatically when the backrests are lowered.
Pull up the backrest's locking handle
while folding the backrest forward at the
same time. A red indicator on the lock
catch
shows that the backrest is no
longer locked in place.
03 Your driving environment
Seats
NOTE
When the backrests have been lowered the
head restraints must be moved forward
slightly so as not to make contact with the
seat cushion.
Raising takes place in reverse order.
03
NOTE
When the backrest has been raised, the red
indicator should no longer be showing. If it
is still showing then the backrest is not
locked in place.
WARNING
Check that the backrests and head
restraints in the rear seat are locked properly after being folded up.
85
03 Your driving environment
Steering wheel
Adjusting
WARNING
Horn
Adjust the steering wheel and fix it before
driving away.
With speed related power steering* the level of
steering force can be adjusted, see page 233.
03
Keypads*
Adjusting the steering wheel.
Horn.
Lever - releasing the steering wheel
Press the centre of the steering wheel to signal.
Possible steering wheel positions
The steering wheel can be adjusted for both
height and depth:
1. Push the lever forwards to release the
steering wheel.
Keypads in the steering wheel.
2. Adjust the steering wheel to the position
that suits you.
3. Pull the lever back to fix the steering wheel
in place. If the lever is stiff, press the steering wheel lightly at the same time as you
push the lever back.
86
* Option/accessory, for more information, see Introduction.
Cruise control, see page 145
Adaptive cruise control, see page 147
Audio and phone control, see page 241.
03 Your driving environment
Lighting
Light switches
The display lighting is automatically subdued
in darkness - the sensitivity is set with the
thumbwheel.
Main/dipped beam
The intensity of the instrument lighting is
adjusted with the thumbwheel.
Headlamp levelling
03
The load in the car changes the vertical alignment of the headlamp beam, which could dazzle oncoming motorists. Avoid this by adjusting
the height of the beam. Lower the beam if the
car is heavily laden.
Overview, light switches.
Thumbwheel for adjusting display and
instrument lighting as well as ceiling lamps,
mood lights and lighting in the front door
storage compartments*
Rear fog lamp
1. Leave the engine running, or have the car's
electrical system in key position I.
Headlamp control and stalk switch.
Position for main beam flash
2. Roll the thumbwheel up/down to raise/
lower beam alignment.
Position for main beam
Cars with active Xenon headlamps* have automatic headlamp levelling and are therefore not
equipped with the thumbwheel.
Light switches
Thumbwheel1 for headlamp levelling
Instrument lighting
Different display and instrument lighting is
switched on depending on key position, see
page 79.
1
Not available for cars equipped with active Xenon headlamps*.
``
* Option/accessory, for more information, see Introduction.
87
03 Your driving environment
Lighting
Position
Specification
Position
Daytime running lights
03
Specification
Daytime running lights during
daytime driving. Automatic
switching to dipped beam in
poor light conditions and when
windscreen wipers or rear fog
lamps are activated.
Main beam flash operates in this
position.
Daytime running lights when the
car is being driven. Automatic
switching to parking lights when
the car is parked.
Main beam flash
Move the stalk switch gently towards the steering wheel to the position for main beam flash.
Main beam comes on until the stalk switch is
released.
Daytime running lights during the day.
DRL
The "Tunnel detection*" function activates dipped beam in
poor light conditions.
The function for "Main beam
with automatic activation*" can
be used.
Main beam flash operates in this
position.
Dipped beam
Main beam can be activated.
Main beam flash operates in this
position.
Volvo recommends that
mode is used,
as long as the traffic situation or weather conditions are not unfavourable for the function for
"Main beam with automatic activation*".
88
* Option/accessory, for more information, see Introduction.
Light switch in position AUTO.
With the light switch in the
position, the
Daytime Running Lights (DRL) are activated
automatically during the daytime. This is regulated by a light sensor which switches from
daytime running lights to dipped beam off the
main headlamps at dusk or when the daylight
becomes too weak. Switching to dipped beam
also takes place if the windscreen wipers or
rear foglights are activated.
03 Your driving environment
Lighting
NOTE
To achieve minimal energy consumption,
the rear lights are also switched off when
switching automatically from dipped beam
to DRLs.
WARNING
This system help to save energy - it cannot
determine in all situations when daylight is
too weak or sufficiently strong, e.g. in mist
and rain.
The driver is always responsible for ensuring
that the car is driven with its lights in a correct state and in accordance with applicable
traffic regulations.
Dipped beam
In
position, dipped beam is activated
automatically at dusk or when daylight
becomes too weak. Dipped beam is also activated automatically if the windscreen wipers or
rear foglights are activated.
dipped beam is always actiIn position
vated when the engine is running or when key
position II is active.
deactivate main beam by moving the stalk
switch towards the steering wheel to the end
position and release. Alternatively, the main
beam can be deactivated by a light press of the
stalk switch toward the steering wheel.
When main beam has been activated the symbol
illuminates in the combined instrument panel.
03
Main beam with automatic activation AHB*
Main beam with automatic activation (Active
High Beam - AHB) is a function which uses a
camera sensor at the top edge of the windscreen to detect the headlamp beams of
oncoming traffic or the rear lights of vehicles in
front, and then switches from main beam to
dipped beam. The lights are switched back to
main beam a second or so after the camera
sensor no longer detects any such light.
Light switch in position AUTO.
Activate/deactivate AHB by moving the lefthand stalk switch towards the steering wheel
to the end position and release. Deactivation
when main beam is on means that the lights
switch directly to dipped beam.
This function can be activated when the head. For activation
lamp control is in position
to take place, the engine must have been running for at least 20 seconds and the speed of
the car must be 20 km/h or higher.
Main beam
Main beam can be activated when the head. Activate/
lamp control is in position
Headlamp control and stalk switch.
* Option/accessory, for more information, see Introduction.
89
03 Your driving environment
Lighting
In cars with analogue combined instrument
panel:
When AHB has been activated, the symbol
03
illuminates in the instrument panel display. When main beam has been activated, the
symbol also illuminates in the instrument panel display.
In cars with digital combined instrument
panel:
symbol
When AHB is activated, the
shines white in the instrument panel display.
When main beam is activated, the symbol
shines blue.
main and dipped beam. However, the headlamp control may nevertheless be in position
. The same applies if the message
Windscreen sensors blocked See manual
and the
•
•
•
•
•
•
In heavy rain or dense fog
•
If there are pedestrians on or beside the
road
•
If there are highly reflective objects such
as signs in the vicinity of the road
AHB is an aid for using optimum light composition when conditions are favourable.
•
When the lighting from oncoming traffic
is obscured by e.g. a crash barrier
The driver always bears responsibility for
manually switching between main and
dipped beam when traffic situations or
weather conditions so require.
•
When there is traffic on connecting
roads
symbol goes out when these messages are shown.
AHB may be temporarily unavailable e.g. in situations with dense fog or heavy rain. When
AHB becomes available again, or the windscreen sensors are no longer blocked, the
message goes out and the
minates.
Do not stick or attach anything to the windscreen in front of the camera sensor as this
may reduce effectiveness or cause one or
more of the systems dependent on the camera to stop working.
If the message Active main beam
Temporary unavailable Swicth manually is
shown in the combined instrument panel's display then you have to switch manually between
90
symbol illu-
WARNING
NOTE
Keep the windscreen surface in front of the
camera sensor free from ice, snow, mist and
dirt.
symbol are shown. The
IMPORTANT
Examples of when manual switching
between main and dipped beam may be
required:
* Option/accessory, for more information, see Introduction.
•
•
In freezing rain
In snow flurries or slush
In moonlight
When driving in poorly lit built-up areas
When the traffic ahead has weak lighting
On the brow of a hill or in a hollow
In sharp bends.
For more information on the limitations of the
camera sensor, see page 171.
Tunnel detection*
In cars fitted with a rain sensor*, the rain sensor
detects the change in light conditions when the
03 Your driving environment
Lighting
car enters a tunnel, for example. The lighting is
then switched within one second from daytime
running lights to the main headlamps' dipped
beam. Approx. 20 seconds after the car has
emerged from the tunnel, the lights return to
daytime running lights. If the car is driven into
another tunnel within this time period, the
return to daytime running lights is cancelled.
This prevents frequent changes to the car lighting. Note! - The headlamp control must be in
position for tunnel detection to work.
Active Xenon headlamps ABL*
movement in order to provide maximum lighting in bends and junctions and so provide
increased safety.
The function is activated automatically when
the car is started (provided that it has not been
deactivated in the menu system MY CAR). In
the event of a fault in the function the
symbol illuminates in the combined instrument
panel at the same time as the information display shows an explanatory text and a further
illuminated symbol.
Symbol
Display
Specification
Headlamp
failure
Service
required
The system
is disengaged. Visit
a workshop
if the message
remains.
Volvo recommends
that you
contact an
authorised
Volvo workshop.
03
The function is only active in twilight or darkness and only when the car is moving.
Headlamp pattern with function deactivated (left)
and activated (right) respectively.
The function2 can be deactivated/ activated in
the menu system MY CAR under Settings
Car settings Light settings Active
Bending Lights. For a description of the menu
system, see page 204.
If the car is equipped with active Xenon headlamps Active Bending Lights - ABL the light
from the headlamps follows the steering wheel
2
Activated on delivery from the factory.
``
* Option/accessory, for more information, see Introduction.
91
03 Your driving environment
Lighting
Position/parking lamps
Brake lights
The brake light automatically comes on during
braking. For information on the Emergency
brake lights and automatic hazard warning
flashers, see page 129.
NOTE
Regulations on the use of rear fog lamps
vary from country to country.
Hazard warning flashers
03
Rear fog lamp
Headlamp control in position for position/parking
lamps.
Turn the light switch to the position for position/parking lights (the numberplate lights
come on at the same time).
When it is dark outside and the tailgate is
opened the rear position lamps illuminate to
alert traffic behind. This takes place irrespective of what position the headlamp control is in
or what key position the car's electrical system
is in.
Button for hazard warning flashers.
Button for rear fog lamp.
The rear fog lamp consists of two rear lamps
and can only be switched on in combination
with main/dipped beam.
Press the button for On/Off. The rear fog lamp
on the combined
indicator symbol
instrument panel and the light in the button illuminate when the rear fog lamp is switched on.
The rear fog lamp is switched off automatically
when the engine is switched off.
92
Press the button to activate the hazard warning
flashers. Both direction indicator symbols in
the combined instrument panel flash when the
hazard warning flashers are in use.
The hazard warning flashers are activated
automatically when the car has been braked so
suddenly that the emergency brake lights have
been activated at a speed below 10 km/h. The
hazard warning flashers remain on when the
car has stopped and are deactivated automatically when the car is driven off again or the
03 Your driving environment
Lighting
button is depressed. For more information on
Emergency brake lights and automatic hazard
warning flashers, see page 129.
Direction indicators/flashers
Continuous flash sequence
Move the stalk switch up or down to the
outer position.
The stalk switch remains in its position and is
moved back manually, or automatically by the
steering wheel movement.
Direction indicator symbols
Auto function for passenger compartment
lighting
Reading lamp, right-hand side
All lighting in the passenger compartment can
be switched on and off manually within
30 minutes from when:
03
• the engine has been switched off and the
For direction indicator symbols, see page 72.
car's electrical system is in key position 0
• the car has been unlocked but the engine
has not been started.
Interior lighting
Front reading lamps*
The reading lamps are switched on or off by
briefly pressing the relevant button in the roof
console.
Brightness is adjusted by holding the button
pressed in.
Direction indicators/flashers.
Short flash sequence
Move the stalk switch up or down to the
first position and release. The direction
indicators flash three times. The function
can be activated/deactivated in the menu
system MY CAR under Settings Car
settings Light settings Triple
indicator. For a description of the menu
system, see page 204.
Controls in the roof console for the front reading
lamps and ceiling lamps.
Reading lamp, left-hand side
Passenger compartment lighting (floor
lamps* and ceiling lamps) - On/Off
``
* Option/accessory, for more information, see Introduction.
93
03 Your driving environment
Lighting
Rear reading lamps*
Lighting in the front door storage
compartments*
Passenger compartment lighting is switched
off when:
Lighting in the front door storage compartments comes on when the engine starts.
• the engine is started
• the car is locked.
Glovebox lighting
The passenger compartment lighting comes
on and remains on for two minutes if one of the
doors is open.
Glovebox lighting is switched on and off
respectively when the lid is opened or closed.
03
Vanity mirror
The lighting for the vanity mirror, see
page 236, is switched on and off respectively
when the cover is opened or closed.
Rear reading lamps.
Lighting, cargo area
The lamps are switched on or off by briefly
pressing the relevant button.
The lighting in the cargo area is switched on
and off respectively when the tailgate is
opened or closed.
Brightness is adjusted by holding the button
pressed in.
Floor lamps* and ceiling lamps
The floor lamps and ceiling lamps are switched
on and off respectively when a side door is
opened or closed.
Floor lamp intensity can be changed in the
MY CAR menu system under Settings Car
settings Light settings Interior light
Floor lights. Select from Off, Low and High.
For more information on the MY CAR menu
system, see page 205.
Auto function for passenger
compartment lighting
The auto function is activated when the lamp
in the AUTO button is lit.
The passenger compartment lighting is then
switched on and off as indicated below.
The passenger compartment lighting is
switched on and remains on for 30 seconds if:
• the car is unlocked with the remote control
key or key blade, see pages 44 or 47
• the engine has been switched off and the
car's electrical system is in key position 0.
94
* Option/accessory, for more information, see Introduction.
If any lighting is switched on manually and the
car is locked then it will be switched off automatically after two minutes.
Mood lights
When the normal passenger compartment
lighting is switched off and the engine is running, an LED in the front roof console illuminates in order to provide a low light and
enhance the mood while driving. The light also
makes it better to see objects in the storage
compartments, etc. when it is dark out. Light
intensity can be changed in the MY CAR menu
system under Settings Car settings
Light settings Interior light Ambient
light. Select from Off, Low and High. This
lighting extinguishes when the engine is
switched off.
If the car also has mood lights in the roof console for rear reading lamps*, the colour of the
lights can be set in the MY CAR menu system
under Settings Car settings Light
03 Your driving environment
Lighting
Home safe light duration
Some of the exterior lighting can be kept
switched on to work as home safe lighting after
the car has been locked.
1. Remove the remote control key from the
ignition switch.
2. Move the left-hand stalk switch toward the
steering wheel to the end position and
release it. The function can be activated in
the same way as with main beam flash, see
page 87.
menu system MY CAR under Settings Car
settings Light settings Home safe light
duration. For a description of the menu system, see page 204.
Adjusting headlamp pattern
Approach light duration
03
Approach lighting is switched on with the
remote control key, see page 44, and is used
to switch on the car's lighting at a distance.
When the function is activated with the remote
control, parking lamps, door mirror lamps,
number plate lighting, interior ceiling lamps
and floor lamps are switched on.
G021151
settings Interior light Ambient light
colours. If you select Temperature, the colour
shifts between warm white and cold white
depending on the temperature in the car or you
can choose between different colour themes.
The available colour themes are Frosty
White, Toscana White, Ember Gold, Red
Sunset, Rainforest, Glacier Blue and Violet
Purple. For more information on the MY CAR
menu system, see page 205.
Headlamp pattern, left-hand traffic.
The length of time for which the approach lighting should be kept on can be set in the menu
system MY CAR under Settings Car
settings Light settings Approach light
duration. For a description of the menu system, see page 204.
When the function is activated, dipped beam,
parking lamps, door mirror lamps, number
plate lighting, interior ceiling lamps and floor
lamps are switched on.
The length of time for which the home safe
lighting should be kept on can be set in the
G021152
3. Get out of the car and lock the door.
Headlamp pattern, right-hand traffic.
The headlamp pattern must be adjusted to
avoid dazzling oncoming motorists and can be
set for right or left-hand traffic.
``
95
03 Your driving environment
Lighting
Active Xenon headlamps*
The light pattern does not need to be adjusted.
Halogen headlamps
03
The headlamp pattern for halogen headlamps
is readjusted by masking the headlamp lens.
The headlamp pattern may not be as good.
Masking the headlamps
1. Copy the A and B templates for left-hand
drive cars or the C and D templates for
right-hand drive cars see page 98. The
template scale is 1:2. Use a photocopier
with a zoom function to copy the templates
at 200 %:
• A = LHD Right (left-hand drive, right
lens)
• B = LHD Left (left-hand drive, left lens)
• C = RHD Right (right-hand drive, right
lens)
• D = RHD Left (right-hand drive, left lens)
2. Transfer the template to a self-adhesive
waterproof material and cut it out.
3. Start from the design lines on the headlamp lenses; see the lines on page 97.
Position the self-adhesive templates at the
design lines with the help of the illustration.
96
* Option/accessory, for more information, see Introduction.
03 Your driving environment
Lighting
Aligning the templates
03
Upper row: left-hand drive cars, templates A and B. Lower row: right-hand drive cars, templates C and D.
``
97
03 Your driving environment
Lighting
Templates for halogen headlamps
03
98
03 Your driving environment
Wipers and washing
Windscreen wipers1
Continuous wiping
The wipers sweep at normal speed.
When the rain sensor is activated a light in the
button the rain sensor symbol
is shown
in the right-hand display in the combined
instrument panel.
The wipers sweep at high speed.
IMPORTANT
Rain sensor, on/off
Thumbwheel sensitivity/frequency
IMPORTANT
Use plenty of washer fluid when the wipers
are cleaning the windscreen. The windscreen must be wet when the windscreen
wipers are operating.
Windscreen wipers off
Move the stalk switch to position 0 to
switch off the windscreen wipers.
Single sweep
Raise the stalk switch and release to
make one sweep.
Intermittent wiping
Set the number of sweeps per time
unit with the thumbwheel when intermittent wiping is selected.
1
03
Activating and setting the sensitivity
Before activating the wipers during winter
ensure that the wiper blades are not frozen
in, and that any snow or ice on the windscreen is scraped away.
Windscreen wipers and windscreen washers.
the rain sensor can be adjusted using the
thumbwheel.
Service position wiper blade
For cleaning the windscreen/wiper blades and
replacement of wiper blades see see
page 341 and 357.
When activating the rain sensor, the car must
be running or the remote control key in position
I or II while the windscreen wiper stalk switch
must be in position 0 or in the position for a
single sweep.
Activate the rain sensor by pressing the button
. The windscreen wipers make one
sweep.
Press the stalk switch up for the wipers to make
an extra sweep.
Turn the thumbwheel upward for higher sensitivity and downward for lower sensitivity. (An
extra sweep is made when the thumbwheel is
turned upward.)
Deactivate
Rain sensor*
The rain sensor automatically starts the windscreen wipers based on how much water it
detects on the windscreen. The sensitivity of
Deactivate the rain sensor by pressing the butor move the stalk switch down to
ton
another wiper program.
Replacing the wiper blades see page 341, service position, wiper blade see page 341 and filling washer fluid see page 343.
* Option/accessory, for more information, see Introduction.
99
03 Your driving environment
Wipers and washing
The rain sensor is automatically deactivated
when the remote control key is removed from
the ignition switch or five minutes after the
engine has been switched off.
IMPORTANT
03
The windscreen wipers could start and be
damaged in an automatic car wash. Switch
off the rain sensor while the car is in motion
or when the remote control key is in position
I or II. The symbol in the combined instrument panel and the light in the button go
out.
Washing the windscreen
The windscreen wipers will make several more
sweeps and the headlamps are washed once
the stalk switch has been released.
High-pressure headlamp washing*
High-pressure headlamp washing consumes a
large quantity of washer fluid. To save fluid, the
headlamps are washed automatically at every
fifth windscreen wash cycle.
Reduced washing
Washing the headlamps and windows
If only approx. 1 litre of washer fluid remains in
the reservoir and the message that you should
fill the washer fluid is shown in the combined
instrument panel's display, then the supply of
washer fluid to the headlamps is switched off.
This is in order to prioritise cleaning the windscreen and the visibility through it.
Washing function.
100
Wiping and washing the rear window
Move the stalk switch toward the steering
wheel to start the windscreen and headlamp
washers.
* Option/accessory, for more information, see Introduction.
Rear window wiper – intermittent wiping
Rear window wiper – continuous speed
Press the stalk switch forward (see the arrow
in the illustration above) to initiate rear window
washing and wiping.
NOTE
The rear window wiper is equipped with
overheating protection which means that
the motor is switched off if it overheats. The
rear window wiper works again after a cooling period (30 seconds or longer, depending
on the heat in the motor and the outside
temperature).
03 Your driving environment
Wipers and washing
Wiper – reversing
Engaging reverse gear while the windscreen
wipers are on initiates intermittent rear window
wiping2. The function stops when reverse gear
is disengaged.
If the rear window wiper is already on at continuous speed, no change is made.
03
NOTE
On cars with rain sensors, the rear wiper is
activated during reversing if the sensor is
activated and it is raining.
2
This function (intermittent wiping when reversing) can be deactivated. Visit a workshop. Volvo recommends that you contact an authorised Volvo workshop.
101
03 Your driving environment
Windows, rearview and door mirrors
General
Heat-reflecting windscreen*
Laminated glass
03
The glass is reinforced which provides better protection against
break-ins and improved sound insulation in the passenger compartment.
The windscreen and other windows* have laminated glass.
For the optimal function of electronic equipment, it should be positioned on the part of the
windscreen with no heat-reflecting film (see the
highlighted area in the above illustration).
Power windows
Water and dirt-repellent coating*
Windows are treated with a coating
that improves the view in difficult
weather conditions. Maintenance, see
page 358.
Areas where IR film is not applied.
Dimensions
IMPORTANT
Do not use a metal ice scraper to remove ice
from the windows. Use the heating to
remove ice from the door mirrors, see
page 105.
A
65 mm
B
150 mm
C
125 mm
The windscreen is equipped with a heatreflecting film (IR) that reduces the solar heat
radiation into the passenger compartment.
The positioning of electronic equipment, such
as a transponder, behind a glass surface with
heat-reflecting film may affect its function and
performance.
102
* Option/accessory, for more information, see Introduction.
Driver's door control panel.
Switch for electric child safety locks* and
disengaging rear power window buttons,
see page 60.
Rear window controls
Front window controls
03 Your driving environment
Windows, rearview and door mirrors
WARNING
Operating
Check that no rear seat passengers are
trapped when the windows are closed from
the driver's door.
WARNING
Check that children or other passengers are
not trapped if the windows are closed, even
when the remote control key is used.
03
NOTE
WARNING
If there are children in the car - remember to
always switch off the power supply to the
power windows by selecting key position 0
and then take the remote control key with
you when leaving the car. For information on
key positions - see page 80.
Closing of the windows is stopped and the
window is opened if anything prevents its
movement. It is possible to override the pinch
protection when closing has been interrupted,
e.g. if there is ice forming. After two successive
closing interruptions the pinch protection will
be forced and the automatic function deactivated for a short while, now it is possible to
close by continually holding the button pulled
up.
Operating the power windows.
Operating without auto
Operating with auto
All power windows can be operated using the
control panel for the driver's door - the control
panels for the other doors can only each operate their respective power window. Only one
control panel can be operated at a time.
In order for the power windows to be used the
key position must be at least I - see page 79.
The power windows can be operated for a few
minutes after the engine has been switched off
and after the remote control key has been
removed - although not after a door has been
opened.
One way to reduce the pulsating wind noise
when the rear windows are open is to also
open the front windows slightly.
Operating without auto
Move one of the controls up/down gently. The
power windows move up/down as long as the
control is held in position.
Operating with auto
Move one of the controls up/down to the end
position and release it. The window runs automatically to its end position.
Operating with the remote control key
and central locking
To remotely operate the power windows from
the outside with the remote control key or from
inside with central locking, see pages 44 and
55.
103
03 Your driving environment
Windows, rearview and door mirrors
Resetting
Door mirrors
WARNING
If the battery is disconnected then the function
for automatic opening must be reset so that it
can work correctly.
03
The mirror on the driver's side is the wideangle type to provide optimal vision.
Objects may appear further away than they
actually are.
1. Gently raise the front section of the button
to raise the window to its end position and
hold it there for one second.
Storing the position1
2. Release the button briefly.
3. Raise the front section of the button again
for one second.
WARNING
A reset must take place for pinch protection
to work.
Door mirror controls.
Adjusting
1. Press the L button for the left-hand door
mirror or the R button for the right-hand
door mirror. The light in the button illuminates.
2. Adjust the position with the joystick in the
centre.
3. Press the L or R button again. The light
should no longer be illuminated.
The mirror positions are stored in the key memory when the car has been locked with the
remote control key. When the car is unlocked
with the same remote control key the mirrors
and the driver's seat adopt the stored positions
when the driver's door is opened.
The function can be activated/deactivated in
the menu system MY CAR under Settings
Car settings Car key memory Personal
settings in key memory. For a description of
the menu system, see page 204.
Angling the door mirror when parking1
The door mirror can be angled down for the
driver to view the side of the road when parking
for example.
–
Engage reverse gear and press the L or R
button.
When reverse gear is disengaged the mirror
automatically returns to its original position
1
104
Only in combination with power seat with memory, see page 82.
03 Your driving environment
Windows, rearview and door mirrors
after about 10 seconds, or earlier by pressing
the button labelled L or R respectively.
Automatic angling of the door mirror
when parking1
When reverse gear is engaged the door mirror
is automatically angled down so that the driver
can see the side of the road when parking for
example. When reverse gear is disengaged the
mirror automatically returns to its original position after a short time.
The function can be activated/deactivated in
the menu system MY CAR under Settings
Car settings Side mirror settings Tilt
left mirror or Tilt right mirror. For a description of the menu system, see page 204.
Automatic retraction when locking1
When the car is locked/unlocked with the
remote control key the door mirrors are automatically retracted/extended.
The function can be activated/deactivated in
the menu system MY CAR under Settings
Car settings Side mirror settings Fold
mirrors. For a description of the menu system,
see page 204.
1
Resetting to neutral
Home safe and approach lighting
Mirrors that have been moved out of position
by an external force must be reset electrically
to the neutral position for electric retracting/
extending to work correctly:
The light on the door mirrors illuminates when
approach lighting or home safe lighting is
selected, see page 95.
1. Retract the mirrors with the L and R buttons.
Heated windscreen*, rear window and
door mirrors
03
2. Fold them out again with the L and R buttons.
3. Repeat the above procedure as necessary.
The mirrors are now reset in neutral position.
Retractable power door mirrors*
The mirrors can be retracted for parking/driving
in narrow spaces:
1. Depress the L and R buttons simultaneously (key position must be at least I).
2. Release them after
approximately 1 second. The mirrors automatically stop in the fully retracted position.
Fold out the mirrors by pressing down the L
and R buttons simultaneously. The mirrors
automatically stop in the fully extended position.
Heating for windscreen (1), rear window and door
mirrors (2)
Use the defroster to quickly remove misting
and ice from the windscreen, rear window and
door mirrors.
One press of the button starts the heating. The
light in the button indicates that the function is
active. Disconnect the heating as soon as the
ice/misting is cleared in order not to load the
Only in combination with power seat with memory, see page 82.
``
* Option/accessory, for more information, see Introduction.
105
03 Your driving environment
Windows, rearview and door mirrors
battery unnecessarily. However, the heating is
switched off automatically after a certain time.
Interior rearview mirror
Refer to the section "Heated windscreen and
max. defroster" on page 219.
03
Glass roof*
The door mirrors and rear window are demisted/defrosted automatically if the car is started
in an outside temperature lower than +9 °C.
Automatic defrosting can be selected in the
menu system MY CAR under Settings
Climate settings Automatic rear
defroster. Select between On or Off. For a
description of the menu system, see
page 204.
The compass is deactivated when the heated
windscreen is activated. When the heated
windscreen is deactivated, the compass is
reactivated.
The glass roof is fixed, but the blind can be
operated in key position I or II with the control
in the roof console. For information on key
positions - see page 79.
Control for dimming
Manual dimming
Bright light from behind could be reflected in
the rearview mirror and dazzle the driver. Use
dimming with the dimming control when lights
from behind are distracting:
1. Use dimming by moving the control in
towards the passenger compartment.
2. Return to normal position by moving the
control towards the windscreen.
Automatic dimming*
Bright light from behind is automatically
dimmed by the rearview mirror. The control is
not available in mirrors with automatic dimming.
106
The compass* can only be specified for rearview mirrors with automatic dimming, see
page 107.
* Option/accessory, for more information, see Introduction.
Automatic opening to end position
Manual opening until the button is released
Manual closing until the button is released
Automatic closing to end position
03 Your driving environment
Compass*
Operation
Calibration
The earth is divided into 15 magnetic zones.
The compass is set for the geographic area to
which the car was delivered. The compass
should be calibrated if the car is moved across
several magnetic zones. Proceed as follows:
03
G030295
1. Stop the car in a large open area free from
steel structures and high-voltage power
lines.
2. Start the car.
NOTE
Rearview mirror with compass.
The upper right-hand corner of the rearview
mirror has an integrated display that shows the
compass direction in which the front of the car
is pointing. Eight different directions are shown
with English abbreviations: N (north), NE (north
east), E (east), SE (south east), S (south), SW
(south west), W (west) and NW (north west).
The compass is activated automatically when
the car is started or in key position II, see
page 79. To deactivate/activate the compass press in the button on the rear side of the mirror
using a paper clip for example.
The compass is deactivated when the heated
windscreen is activated. When the heated
windscreen is deactivated, the compass is
reactivated.
Magnetic zones.
For the best calibration, switch off all electrical equipment (climate control system,
wipers, etc.) and makes sure that all doors
are closed.
3. Hold the button on the rear of the rearview
mirror depressed approx. 6 seconds (using
a paper clip for example) until the character
C is shown.
4. Hold the button on the rear of the rearview
mirror depressed approx. 3 seconds. The
number of the current magnetic zone is
shown.
5. Press the button repeatedly until the
required magnetic zone (1–15) is shown.
See the map of magnetic zones for the
compass.
6. Wait until the display resumes showing the
character C.
7. Drive slowly in a circle at a speed of no
more than 10 km/h until a compass direction is shown in the display, indicating that
calibration is complete. Then drive a further
2 circles to fine-tune calibration.
8. Repeat the above procedure as necessary.
* Option/accessory, for more information, see Introduction.
107
03 Your driving environment
Alcolock*
General information on the alcolock
03
Functions
The function of the Alcolock1 is to prevent the
car from being driven by individuals under the
influence of alcohol. Before the engine can be
started the driver must take a breath test that
verifies that he/she is not under the influence
of alcohol. Alcolock calibration takes place in
accordance with each market's limit value in
force for driving legally.
Operation
Battery
Alcolock indicator lamp (4) shows battery status:
Indicator lamp
(4)
Battery status
Green flashing
Charging in progress
Green
Fully charged
Yellow
Semi-charged
Red
Discharged - fit the
charger in the holder
or connect the
power supply cable
from the glovebox.
WARNING
The Alcolock is an aid and does not exempt
the driver from responsibility. It is always the
responsibility of the driver to be sober and
to drive the car safely.
Nozzle for breath test.
Switch.
Transmission button.
Lamp for battery status.
Lamp for result of breath test.
Lamp indicates ready for breath test.
NOTE
Store the Alcolock in its holder. This will
keep the built-in battery fully charged and
the Alcolock is activated automatically
when the car is opened.
1
108
Also called Alcoguard.
* Option/accessory, for more information, see Introduction.
03 Your driving environment
Alcolock*
Storage
unlocked then it must first be activated
with the switch (2).
Result after breath test
3. Fold up the nozzle (1), take a deep breath
and blow with an even pressure until a
"click" is heard after approx. 5 seconds.
The result will be one of the alternatives in
the following table Result after breath
test.
4. If no message is shown then the transmission to the car may have failed - in which
case, press the button (3) to transmit the
result to the car manually.
Handheld unit storage and charging station.
• The handheld alcolock unit is released by
depressing it slightly in its holder and
releasing it - it then springs out and can be
removed from the holder.
Indicator lamp
(5) + Display text
Specification
Green lamp + Alcoguard Approved
test
Start the engine - no
alcohol content
measured.
Yellow lamp + Alcoguard Approved
test
Engine starting possible - measured
alcohol content is
above 0.1 promille
but below the limit
value in forceA.
Red lamp + Disapproved test Wait 1
minute
Engine starting not
possible - measured
alcohol content is
above the limit value
in forceA.
5. Fold down the nozzle and refit the Alcolock
in its holder.
6. Start the engine following an approved
breath test within 5 minutes - otherwise it
must be repeated.
• Replace the handheld unit in the holder by
03
pushing it in until it engages.
• Store the handheld unit in the holder - this
provides it with the best protection and
keeps its batteries fully charged.
A
Limits vary between countries, so find out what limits apply.
See also the section entitled General information on the
Alcolock on page 108
NOTE
Before starting the engine
The Alcolock is activated automatically and is
then ready for use when the car is opened.
After a completed period of driving, the
engine can be restarted within 30 minutes
without a new breath test.
1. When the indicator lamp (6) is green the
Alcolock is ready for use.
2. Withdraw the Alcolock from its holder. If
the Alcolock is outside the car when it is
* Option/accessory, for more information, see Introduction.
109
03 Your driving environment
Alcolock*
To bear in mind
Before the breath test
In order to obtain correct function and as accurate a measurement result as possible:
• Avoid eating or drinking
approx. 5 minutes before the breath test.
03
• Avoid excess windscreen washing - the
alcohol in the washer fluid may result in an
incorrect measurement result.
Change of driver
In order to ensure that a new breath test is carried out in the event of a change of driver depress the switch (2) and the send button (3)
simultaneously for approx. 3 seconds. At
which point the car returns to start inhibition
mode and a new approved breath test is
required before starting the engine.
tion will then be possible, see page 110 section Emergency situation.
In extremely cold weather the heating time can
be reduced by taking the Alcolock indoors.
The message can be cleared by pressing the
send button (3) once. Otherwise it goes out on
its own after approx. 2 minutes but then reappears each time the engine is started - only
recalibration at a workshop2 can clear the message permanently.
Emergency situation
Cold or hot weather
The colder the weather the longer it takes
before the Alcolock is ready for use:
Temperature (ºC)
Maximum heating time (seconds)
+10 to +85
10
-5 to +10
60
-40 to -5
180
Calibration and service
The Alcolock must be checked and calibrated
at a workshop2 every 12 months.
30 days before recalibration is necessary the
display shows Alcoguard Calibr. required. If
calibration is not carried out within these 30
days then normal engine starting will be
blocked - only starting with the Bypass func-
2
110
At temperatures below -20 ºC or above
+60 ºC the Alcolock requires additional power
supply. The display shows Alcoguard insert
power cable. In which case, connect the
power supply cable from the glovebox and wait
until indicator lamp (6) is green.
An authorised Volvo workshop is recommended.
* Option/accessory, for more information, see Introduction.
In the event of an emergency situation or the
Alcolock is out of order, it is possible to bypass
the Alcolock in order to drive the car.
NOTE
All Bypass activation is logged and saved in
memory, see page 8 in the section, Recording data.
After the Bypass function has been activated
the display shows Alcoguard Bypass
enabled the whole time while driving and can
only be reset by a workshop2.
The Bypass function can be tested without the
error message being logged - in which case,
carry out all the steps without starting the car.
The error message is cleared when the car is
locked.
When the Alcolock is installed, either the
Bypass or Emergency function is selected as
the bypassing option. This setting can be
changed afterwards at a workshop2.
03 Your driving environment
Alcolock*
Activating the Bypass function
Symbols and display messages
• Depress and hold the left-hand stalk
Display text
Meaning/Action
In addition to the previously described messages, the combined instrument panel's display can also show the following:
Alcoguard Blow
harder
Blowing too weak blow harder.
Alcoguard wait
Preheating
Heating not finished
- wait for text Alcoguard Blow 5 seconds.
switch OK button and the button for hazard warning flashers simultaneously for
approx. 5 seconds - the display first shows
Bypass activated Wait 1 minute and
then Alcoguard Bypass enabled - after
which the engine can be started.
This function can be activated several times.
The error message shown during driving can
only be cleared at a workshop2.
Display text
Meaning/Action
Alcoguard Restart
possible
The engine has been
switched off for less
than 30 minutes engine starting possible without new
test.
Alcoguard Service
required
Contact a workshop2.
Alcoguard No signal
Transmission failed send manually with
button (3) or take a
new breath test.
Alcoguard Invalid
test
Test failed - take a
new breath test.
Alcoguard Blow
longer
Blowing too short blow for longer.
Alcoguard Blow
softer
Blowing too hard blow more gently.
Activating the Emergency function
• Depress and hold the left-hand stalk
switch OK button and the button for hazard warning flashers simultaneously for
approx. 5 seconds - the display shows
Alcoguard Bypass enabled and the
engine can be started.
This function can be used once, after which a
reset must be made at a workshop2.
2
03
An authorised Volvo workshop is recommended.
* Option/accessory, for more information, see Introduction.
111
03 Your driving environment
Starting the engine
Petrol and diesel engines
2. Hold the clutch pedal fully depressed1. (For
cars with automatic gearbox - Depress the
brake pedal.)
3. Press the START/STOP ENGINE button
and then release it.
The starter motor works until the engine starts
or until its overheating protection triggers.
03
IMPORTANT
Ignition switch with remote control key extracted/
inserted. and START/STOP ENGINE button.
If the engine fails to start after 3 attempts wait for 3 minutes before making a further
attempt. Starting capacity increases if the
battery is allowed to recover.
1. Insert the remote control key in the ignition
switch and press it in to its end position.
Note that if the car is equipped with an
alcolock then a breath test must first be
approved before the engine can be started
- see page 108.
1
112
Keyless drive*
Follow steps 2–3 for starting petrol and diesel
engines. For more information on Keyless drive
- see page 50.
NOTE
WARNING
IMPORTANT
Do not press in the remote control key incorrectly turned - Hold the end with the detachable key blade, see page 46.
NOTE
The idling speed can be noticeably higher
than normal for certain engine types during
cold starting. This is done in order that the
emissions system can reach normal operating temperature as quickly as possible,
which minimises exhaust emissions and
protects the environment.
Always remove the remote control key from
the ignition switch when leaving the car, and
make sure that the key position is 0 - in particular if there are children in the car. For
information on how this works - see
page 79.
If the car is moving then it is enough to press the START/STOP ENGINE button to start the car.
* Option/accessory, for more information, see Introduction.
A prerequisite for the car to start is that one
of the car's remote control keys with the
Keyless drive* function is in the passenger
compartment or cargo area.
WARNING
Never remove the remote control key from
the car while driving or during towing.
Stop the engine
To switch off the engine:
03 Your driving environment
Starting the engine
• Press START/STOP ENGINE - the engine
stops.
• If the car has an automatic gearbox and the
gear selector is not in a position P or if the
car is moving - Press twice or hold the
START/STOP ENGINE button depressed
until the engine stops.
03
Steering lock
A mechanical noise can be perceived when the
steering lock unlocks or locks.
• The steering lock unlocks when the remote
control key is in the ignition switch2 and the
START/STOP ENGINE button is
depressed.
• The steering lock locks when the driver's
door is opened after the engine has been
switched off.
Key positions
For information on the remote control key's different key positions - see page 79
2
Cars with Keyless drive must have a remote control key inside the passenger compartment.
113
03 Your driving environment
Starting the engine – external battery
Jump starting
4. Connect one of the red jump lead's clamps
to the donor battery's positive terminal (1).
IMPORTANT
Connect the start cable carefully to avoid
short circuits with other components in the
engine compartment.
03
5. Open the clips on the front cover of the
battery in your car and remove the cover.
IMPORTANT
Do not use the connections when attempting to start, as there is a risk of sparking.
12. Remove the jump leads in reverse order first the black and then the red.
> Make sure that none of the black jump
lead's clamps comes into contact with
the battery's positive terminal or the
clamp connected to the red jump lead!
6. Connect the red jump lead's other clamp
onto the car's positive terminal (2).
If the battery is flat then the car can be started
with current from another battery.
When jump starting the car, the following steps
are recommended to avoid short circuits or
other damage:
1. Insert the remote control key in key position 0, see page 79.
2. Check that the donor battery has a voltage
of 12 V.
3. If the donor battery is installed in another
car - switch off the donor car's engine and
make sure that the two cars do not touch
each other.
114
7. Connect one of the black jump lead's
clamps to the donor battery's negative terminal (3).
8. Connect the other clamp to a grounding
point, e.g. right-hand engine mounting at
the top, the outer screw head (4).
9. Check that the jump lead clamps are
affixed securely so that there are no sparks
during the starting procedure.
10. Start the engine of the "donor car" and
allow it to run a few minutes at a speed
slightly higher than idle approx. 1500 rpm.
11. Start the engine in the car with the discharged battery.
WARNING
•
The battery can generate oxyhydrogen
gas, which is highly explosive. A spark
can be formed if a jump lead is connected incorrectly, and this can be
enough for the battery to explode.
•
The battery contains sulphuric acid,
which can cause serious burns.
•
If sulphuric acid comes into contact
with eyes, skin or clothing, flush with
large quantities of water. If acid
splashes into the eyes - seek medical
attention immediately.
For more information on the car's battery - see
page 344.
03 Your driving environment
Gearboxes
General
Manual gearbox
Reverse gear inhibitor
The reverse gear inhibitor hinders the possibility of mistakenly attempting to engage reverse
gear during normal forward travel.
HSA
The HSA (Hill Start Assist) function is available
for both manual and automatic transmissions.
• Follow the gearing pattern printed on the
The function means that the pedal pressure in
the brake system remains for several seconds
while the foot is moved from the brake pedal to
the accelerator pedal before setting off or
reversing uphill.
The temporary braking effect releases after
several seconds or when the driver accelerates.
IMPORTANT
The operating temperature of the gearbox is
checked in order to prevent damage to any
of the drive system's components. In the
event of a risk of overheating a warning
symbol illuminates on the instrument panel
combined with a text message - In which
case, follow the recommendation given.
gear lever and start from neutral position,
N then depress the gear lever before moving it to R position.
03
• Engage reverse gear only when the car is
stationary.
Gear indicator*
Gearing pattern.
Look at the actual gearshift pattern imprinted
on the gear lever.
• Depress the clutch pedal fully during each
gear change.
• Take your foot off the clutch pedal between
gear changes.
WARNING
Always apply the parking brake when parking on a slope - leaving the car in gear is not
sufficient to hold the car in all situations.
An essential detail in connection with environmental driving is to drive in the right gear and
to change gear in plenty of time.
As an aid, certain variants have an indicator GSI (Gear Shift Indicator) - that informs the
driver when it is appropriate to engage the next
higher or lower gear to achieve the lowest possible fuel consumption. However, taking into
consideration characteristics such as performance and vibration-free running, it may be
advantageous to change gear at a higher
engine speed. The framed number indicates
the current gear.
* Option/accessory, for more information, see Introduction.
115
03 Your driving environment
Gearboxes
Automatic gearbox Geartronic*
The gearbox is mechanically blocked when the
P position is engaged. Apply the parking brake
as well, as a precaution - see page 131.
NOTE
The gear selector must be in P position to
allow the car to be locked and alarmed.
03
IMPORTANT
The car must be stationary when position P is selected.
Instrument panel "Digital" with gear indicator.
Gear indicator for manual
box. Only one marker is illuminated at a time - it is illuminated in the centre only during
normal driving.
D: Automatic gear positions. +/–: Manual gear
positions.
Gear positions
Automatic gear positions are
indicated on the right of the
instrument panel in this manner. (Only one marker is illuminated at a time - the one
showing the current gear
selector position.)
When gearing up/down as
recommended, the upper one is illuminated at
"+" or the lower at "-", marked red in the illustration.
With instrument panel "Analogue", the gear positions and
indicator arrows are displayed in the centre of the
combined instrument panel.
116
Symbol S for "Sport mode" is ORANGE when
the mode is active.
P – Parking position
Select P when starting the engine or when the
car is parked. The brake pedal must be
depressed to disengage the gear selector from
the P position.
* Option/accessory, for more information, see Introduction.
WARNING
Always apply the parking brake when parking on a slope - the automatic transmission
in P is not sufficient to hold the car in all situations.
R – Reverse
The car must be stationary when position R is
selected.
N – Neutral
No gear is engaged and the engine can be
started. Apply the parking brake if the car is
stationary with the gear selector in position N.
D – Drive
D is the normal driving position. Shifting up and
down takes place automatically based on the
level of acceleration and speed. The car must
03 Your driving environment
Gearboxes
be stationary when the gear selector is moved
to position D from position R.
Geartronic – Manual gear positions (+/-)
The driver can also change gear manually
using the Geartronic automatic gearbox. The
car engine-brakes when the accelerator pedal
is released.
The manual gear position is reached by moving
the lever to the side from position D to the end
position at "+/-". The information display’s
symbol "+/-" changes colour from WHITE to
orange and the digits 1 6 is displayed in a box,
which corresponds to the gear which has just
been selected.
• Move the lever forwards towards + (plus)
to change up a gear and release the lever,
which returns to its rest position between
+ and –.
or
• Pull the lever back towards – (minus) to
change down a gear and release it.
• Move the lever to the side to the end position at D.
NOTE
f the gearbox has a Sport programme then
the gearbox will only become manual after
the lever has been moved forwards or backwards in its "+/-" position. The information
display then shifts the indication from S to
show which of the gears 1-6 is engaged.
2. Scroll up to gear 3 by pushing the lever
forward towards + (plus) twice - the display
shifts the indication from 1 to 3.
3. Release the brake and accelerate carefully.
Kick-down
The Sport programme provides sportier characteristics and allows higher engine speed for
the gears. At the same time it responds more
quickly to acceleration. During active driving,
the use of a lower gear is prioritised, leading to
a delayed upshift.
When the accelerator pedal is pressed all the
way to the floor (beyond the position normally
regarded as full acceleration) a lower gear is
immediately engaged. This is known as kickdown.
Sport mode is obtained by moving the lever to
the side from D position to the end position at
"+/-". The information display shifts the indication from D to S.
Sport mode can be selected at any time while
driving.
Geartronic automatically shifts down if the
driver allows the speed to decrease lower than
a level suitable for the selected gear, in order
to avoid jerking and stalling.
Geartronic - Winter mode
03
The gearbox "winter mode" means that the car
moves off with a lower engine speed and
reduced engine power on the drive wheels.
Geartronic - Sport mode (S)
The manual gearshift mode "+/-" can be
selected at any time while driving.
To return to automatic driving mode:
position at "+/-" - the instrument panel display shifts the indication from D to the figure 1.
If the accelerator is released from the kickdown position, the gearbox automatically
changes up.
Kick-down is used when maximum acceleration is needed, such as for overtaking.
Safety function
It can be easier to pull away on slippery roads
if 3rd gear is engaged manually.
To prevent overrevving the engine, the gearbox
control program has a protective downshift
inhibitor which prevents the kick-down function.
1. Depress the brake pedal and move the
gear lever from the D position to the end
Geartronic does not permit downshifting/kickdown which would result in an engine speed
117
03 Your driving environment
Gearboxes
03
high enough to damage the engine. Nothing
happens if the driver still tries to shift down in
this way at high engine speed – the original
gear remains engaged.
Automatic gear selector inhibitor
When kick-down is activated the car can
change one or more gears at a time depending
on engine speed. The car changes up when the
engine reaches its maximum speed in order to
prevent damage to the engine.
Stationary car with engine running:
Mechanical gear selector inhibitor
The automatic gearbox has special safety systems:
Parking position (P)
Keep your foot on the brake pedal when moving the gear selector to another position.
Electric gear inhibitor – Shiftlock Parking
position (P)
To be able to move the gear selector from P to
other gear positions, the brake pedal must be
depressed and the remote control key must be
in position II, see page 79.
Shiftlock – Neutral (N)
G021351
If the gear selector is in the N position and the
car has been stationary for at least 3 seconds
(irrespective of whether the engine is running)
then the gear selector is locked.
The gear selector can be moved forward and
back freely between N and D. Other positions
are locked with a latch that is released with the
inhibitor button on the gear selector.
With the inhibitor button depressed the lever
can be moved forwards or backwards between
P, R, N and D.
118
Deactivate automatic gear selector
inhibitor
To be able to move the gear selector from N to
other gear positions, the brake pedal must be
depressed and the remote control key must be
in position II, see page 79.
If the car cannot be driven, e.g. due to a flat
battery, the gear selector must be moved from
the P position so that the car can be moved.
Lift the rubber mat in the compartment
behind the centre console.
Press and release the yellow button in the
console.
Move the gear selector from the P position.
4. Put the rubber mat back in place.
03 Your driving environment
Gearboxes
Automatic gearbox Powershift*
Powershift or Geartronic?
In the event of uncertainty as to whether or not
the car is equipped with Powershift transmission, this can be verified by checking the designation on the transmission's label under the
bonnet - see page 366. The designation ”MPS6” means that it is Powershift – transmission otherwise it is Geartronic automatic
transmission.
To bear in mind
D: Automatic gear positions. +/–: Manual gear
positions.
Powershift is an automatic gearbox that has
double mechanical clutch discs in contrast to
a conventional automatic gearbox. An automatic gearbox has a hydraulic torque converter
instead that transfers power from engine to
gearbox.
Powershift transmission operates in the same
way and has similar controls and functions as
the Geartronic automatic transmission, described in the previous section.
The transmission's double clutch has overload
protection that is activated if it becomes too
hot, e.g. if the car is held stationary with the
accelerator pedal on an uphill gradient for a
long time.
Overheated transmission causes the car to
shake and vibrate, and the warning symbol illuminates and the information display shows a
message. The transmission can also overheat
during slow driving in queues (10 km/h or
slower) on an uphill gradient, or with a trailer
hitched. The transmission cools down when
the car is stationary, with foot brake depressed
and the engine running at idling speed.
Overheating during slow driving in queues can
be avoided by driving in stages:
• Stop the car and wait with your foot on the
brake pedal until there is a moderate distance to the traffic ahead, drive forward a
short distance, and then wait another
moment with your foot on the brake pedal.
03
IMPORTANT
Use the foot brake to hold the car stationary
on an uphill gradient - do not hold the car
with the accelerator pedal. The gearbox
could then overheat.
For important information regarding
Powershift transmission and towing - see
page 305.
Text message and action
In some situations the display may show a
message at the same time as a symbol is illuminated.
* Option/accessory, for more information, see Introduction.
119
03 Your driving environment
Gearboxes
Symbol
Display
Driving characteristics
Action
Transm. overheat brake to hold
Difficulty in maintaining even speed at constant engine speed.
Transmission overheated. Keep the car
stationary using the foot brake.A
Transm. overheat park safely
Significant pulling in the car's traction.
Transmission overheated. Park the car
immediately in a safe manner.A
Transm. cooling let engine run
No drive due to overheated gearbox.
Transmission overheated. For fastest cooling: Run the engine at idling speed with the
gear lever in the N or P position until the
message clears.
03
A
For fastest cooling: run the engine at idling speed with the gear lever in the N or P position, until the message clears.
The table shows three steps with an increased
degree of seriousness should the transmission
become too hot. In parallel with the display text
the driver is also advised that the car's electronics are temporarily changing the driving
characteristics. Follow the instructions on the
information display where appropriate.
NOTE
The examples in the table are no indication
of the car being defective, but show that a
safety function has been activated with a
view to preventing damage to any of the
car's components.
WARNING
If a warning symbol combined with the text
Transm. overheat park safely is ignored
then the heat in the gearbox may become
so high that the power transmission
between engine and gearbox is temporarily
halted in order to prevent the clutch from
malfunctioning - the car then loses drive and
is stationary until gearbox temperature has
cooled to an acceptable level.
For more possible display messages with their
respective proposals for solutions concerning
automatic transmission, see page 200.
A display text clears automatically after the
action has been carried out or after one press
on the indicator stalk OK button.
120
03 Your driving environment
Eco Guide & Power*
General
Instantaneous value
Power
These meters help the driver to drive the car
while maintaining the best possible economy.
The instantaneous value is displayed here - the
higher the result on the scale, the better.
To display or close a display of these functions,
see page 70.
The instantaneous value is calculated on the
basis of speed, engine speed, engine power
utilised plus use of the foot brake.
This meter shows how much power is being
taken from the engine and how much power is
available.
The car also stores statistics of journeys made,
which can be viewed in the form of a block diagram, see page 232.
EcoGuide
This meter provides an indication of how economically the car is being driven.
03
Optimum speed (50-80 km/h) and low revs are
encouraged. The pointers fall under acceleration and braking.
Very low instantaneous values illuminate the
red zone on the meter, which means poor
economy and hence should be avoided.
Average value
The average value slowly follows the instantaneous value and describes how the car has
been driven of late. The higher the pointers on
the scale, the better the economy achieved by
the driver.
Available engine power
Engine power utilised
Available power
The smaller, upper pointer shows the available
engine power1. The higher the result on the
scale, the more power is available in the current
gear.
1
Instantaneous value
Utilised power
Average value
The larger, lower pointer shows the engine
power utilised1. The higher the result on the
Power is dependent on engine speed.
``
* Option/accessory, for more information, see Introduction.
121
03 Your driving environment
Eco Guide & Power*
scale, the more power is being taken from the
engine.
A large gap between the two pointers indicates
a large power reserve.
03
122
* Option/accessory, for more information, see Introduction.
03 Your driving environment
Start/Stop *
Quieter and cleaner
Environmental care is one of Volvo Car Corporation's core values and it influences all of our
operations. This target-orientation has resulted
in the DRIVe vehicle series whose concept
consists of an interaction between several separate energy-saving functions, all with the
common purpose of reducing fuel consumption, which in turn contributes to reduced
exhaust emissions.
Function and operation
General information on Start/Stop
The Start/Stop function is
activated automatically when
the engine is started with the
key. The driver is alerted to
the function by means of this
symbol on the instrument
panel illuminating briefly, the
display text Auto Start-Stop ON is shown and
the green lamp for the On/Off button illuminates.
The engine is switched off - it becomes quieter and
cleaner...
Some engine and gearbox combinations come
fitted with a Start and Stop function which
engages in the event of e.g. stationary traffic or
waiting at traffic lights - the engine is then
switched off temporarily and restarts automatically when the journey is due to continue.
The Start/Stop function gives the driver the
opportunity for a more active environmentally
conscious way of driving the car by means of
being able to allow the engine to stop automatically, whenever appropriate.
03
All of the car's normal systems such as lighting,
radio, etc. work as normal even with an engine
that has stopped automatically, except that
some equipment may have the function temporarily reduced, e.g. the climate control system's fan speed or extremely high volume on
the audio system.
Auto-stopping the engine
In order that the engine should stop automatically the car must be completely stationary:
Manual or Automatic
Note that there are differences in the
Start/Stop function depending on whether the
gearbox is manual or automatic.
``
* Option/accessory, for more information, see Introduction.
123
03 Your driving environment
Start/Stop *
Conditions
03
A
M/AA
Declutch, set the gear lever in
neutral position and release the
clutch pedal - the engine is
switched off.
M
Stop the car with the foot brake
and then keep your foot on the
pedal - the engine stops automatically.
A
Auto-starting the engine
Conditions
M/AA
With the gear lever in neutral position: Depress the clutch pedal or
press the accelerator pedal - the
engine starts. Engage a suitable
gear and continue the journey.
M
The following option is also available on a downhill gradient:
M
There is more information available on HSA on
page 115.
Deactivating the Start/Stop function
In certain situations, it may
advisable to temporarily
switch off the automatic
Start/Stop function - this is
carried out by pressing this
button once, at which point
the button's lamp goes out.
Release the foot brake and let the
car move off - the engine starts
automatically when the speed
exceeds normal walking pace.
M = Manual gearbox, A = Automatic gearbox.
The AUTO START symbol on the
information display illuminates as
verification and reminder that the engine has
stopped automatically.
Release the foot pressure on the
foot brake - the engine starts
automatically and the journey can
continue.
A
A
M = Manual gearbox, A = Automatic gearbox.
Start assistance HSA
The foot brake can also be released on an uphill
gradient to start the engine automatically - the
HSA function means that the car does not roll
backwards.
HSA (Hill Start Assist) means that the pressure
in the brake system remains temporarily available while the driver moves his/her foot from
the brake pedal to the accelerator pedal for
124
driving off with the engine having stopped
automatically. The temporary braking effect
releases after a couple of seconds or when the
driver accelerates.
* Option/accessory, for more information, see Introduction.
Disengaged Start/Stop function is indicated by
the information display's symbol going out and
the message Auto Start-Stop OFF being displayed for a few seconds. The lamp in the button extinguishes at the same time.
The Start/Stop function is disengaged until it is
reactivated with the button or until the next
time the engine is started with the key.
Limitations
The engine does not auto-stop
Even if the Start/Stop function is activated, the
engine does not stop automatically if:
03 Your driving environment
Start/Stop *
Conditions
M/AA
Conditions
M/AA
Conditions
the car has not achieved
approx. 5 km/h (= fast walking
pace) first after a key start or the
last auto-stop.
M+A
the driver makes greater steering
wheel movements.
M+A
A
M+A
M+A
the gear selector is moved out of
the D position to S positionC or
"+/-".
A
the driver has opened the seatbelt's buckle.
the capacity of the battery is
below the minimum permissible
level.
M+A
the exhaust system's particulate
filter is full - the temporarily disengaged Start/Stop function is
reactivated once an automatic
cleaning cycle has been performed (see page 293).
the driver’s door has been
opened with the gear selector in
D position.
the road is very steep.
M+A
the engine does not have normal
operating temperature.
M+A
a trailer is connected electrically
to the car’s electrical system.
M+A
outside temperature is below
freezing point or above
approx. 30 °C.
M+A
M+A
the environment in the passenger
compartment differs from the
preset valuesB - indicated by the
ventilation fan running at a high
speed.
M+A
the atmospheric air pressure is
less than equivalent to
1500-2400 metres above sea level
- the current air pressure varies
with the prevailing weather conditions.
the car is reversed.
M+A
battery temperature is below
freezing point or above
approx. 55 °C.
M+A
adaptive cruise control Queue
Assist is activated.
A
B
C
A
M/AA
03
M = Manual gearbox, A = Automatic gearbox.
Car with ECC.
Sport mode.
The engine auto-starts
An engine that has stopped automatically may
restart in some cases without the driver having
decided that the journey should continue. In
the following cases the engine also starts automatically if the driver has not depressed the
clutch pedal (manual gearbox) or takes his/her
foot off the brake pedal (automatic gearbox):
Conditions
M/AA
Misting forms on the windows.
M+A
The environment in the passenger compartment deviates from
the preset valuesB.
M+A
``
* Option/accessory, for more information, see Introduction.
125
03 Your driving environment
Start/Stop *
03
A
1. Depress the clutch pedal again - the engine
starts automatically.
WARNING
Conditions
M/AA
The outside temperature falls
below freezing point or exceeds
approx. 30 °C.
M+A
There is a temporarily high current take-off or battery capacity
drops below the lowest permissible level.
M+A
Repeated pumping of the brake
pedal.
M+A
The car starts to roll - faster than
the equivalent normal walking
pace.
M
Conditions
M
The driver's belt lock is opened
with the gear selector in D or N
position.
A
A gear is engaged without
declutching - a display text
prompts the driver to set the gear
lever in neutral position in order to
enable automatic starting.
Steering wheel movements.
A
A
The gear selector is moved from
the D position to "+/-" or R.
A
The driver is unrestrained, the
gear selector is in P position and
the driver’s door is open - a normal engine start must take place.
The driver’s door is opened with
the gear selector in D position.
A
M = Manual gearbox, A = Automatic gearbox.
Do not open the bonnet when the engine
has stopped automatically - the engine may
suddenly start automatically. First switch off
the engine as normal using the START/
STOP ENGINE button before opening the
bonnet.
More information and settings
The engine does not auto-start
In the following cases the engine does not
auto-start after having auto-stopped:
A
M/AA
M = Manual gearbox, A = Automatic gearbox.
Involuntary engine stop with manual
gearbox
In the event that a start-up fails and the engine
stops, proceed as follows:
126
2. In certain cases the gear lever must be set
in neutral position. The information display
then shows the text Put gear in neutral
* Option/accessory, for more information, see Introduction.
The MY CAR menu system in the car includes
instructions which explain parts of the DRIVe
concept along with several possible settings
and options - see page 204.
03 Your driving environment
Start/Stop *
Text message
In combination with this indicator
lamp the Start/Stop function may dis-
Symbol
play text messages on the information display
for certain situations. For some of them there
is a recommended action that should be per-
formed. The following table shows some
examples.
Message
Info/Action
M/AA
Auto Start-Stop ON
Illuminates for a few seconds after Start/Stop has been activated.
M+A
Auto Start-Stop OFF
Illuminates for a few seconds after Start/Stop has been
switched off.
M+A
Auto Start-Stop Service required
Start/Stop is not operational. Contact a workshop - an
authorised Volvo workshop is recommended.
M+A
Engine management system
An automatic function check is carried out.
M+A
Engine in Auto Start
The engine is ready to start automatically - waiting for the
brake or clutch pedal to be depressed.
M
Press Start button
The engine will not start automatically - start the engine as
normal with the START/STOP ENGINE button.
M
Depress clutch pedal to start
The engine is ready to auto-start - waiting for the clutch pedal
to be depressed.
M
Depress brake pedal to start
The engine is ready to auto-start - waiting for the brake pedal
to be depressed.
M
Press brake and clutch to start
The engine is ready to auto-start - waiting for the brake or
clutch pedal to be depressed.
M
03
AUTOSTOP
``
* Option/accessory, for more information, see Introduction.
127
03 Your driving environment
Start/Stop *
Symbol
AUTOSTOP
03
A
Info/Action
Put gear in neutral
Gear is engaged without declutching - disengage and set the
gear lever in neutral position.
M
Engine in Auto Start
The engine is ready to start automatically - waiting for the
brake pedal to be released.
A
Select P or N to start
Start/Stop has been deactivated - move the gear selector to
N or P position and start the engine as normal with the
START/STOP ENGINE button.
A
Press Start button
The engine will not start automatically - start the engine as
normal with the START/STOP ENGINE button and the gear
selector in P or N.
A
M = Manual gearbox, A = Automatic gearbox.
If a message does not go out following completion of the action then a workshop should
be contacted - an authorised Volvo workshop
is recommended.
128
M/AA
Message
* Option/accessory, for more information, see Introduction.
03 Your driving environment
Foot brake
General
The car is equipped with two brake circuits. If
one brake circuit is damaged then this will
mean that the brakes engage at a deeper level
and harder pressure on the pedal is needed to
produce the normal braking effect.
The driver's brake pedal pressure is assisted
by a brake servo.
WARNING
The brake servo only works when the engine
is running.
If the brake is used when the engine is switched
off then the pedal will feel stiff and more force
must be used to brake the car.
In very hilly terrain or when driving with a heavy
load the brakes can be relieved by using engine
braking. Engine braking is most efficiently used
if the same gear is used downhill as up.
For more general information on heavy loads
on the car, see page 372.
Anti-lock braking system
The car is equipped with ABS (Anti-lock
Braking System) which prevents the wheels
from locking during braking. This means the
ability to steer is maintained and it is easier to
swerve to avoid a hazard for example. Vibration
may be felt in the brake pedal when this is
engaged and this is normal.
A short test of the ABS system is made automatically after the engine has been started
when the driver releases the brake pedal. A
further automatic test of the ABS system may
be made when the car reaches 10 km/h. The
test may be experienced as pulses in the brake
pedal.
Cleaning the brake discs
Coatings of dirt and water on the brake discs
may result in delayed brake function. This delay
is minimised by cleaning the brake linings.
Manual cleaning is advisable with wet road surfaces, prior to long-stay parking and after the
car has been washed. Carry this out by braking
gently during a short period while en route.
03
Emergency Brake Assistance
Emergency brake lights and automatic
hazard warning flashers
Emergency brake lights are activated to alert
vehicles behind about sudden braking. The
function means that the brake light flashes
instead of - as in normal braking - shining with
a constant glow.
Emergency brake lights are activated at
speeds above 50 km/h if the ABS system is
working and/or in the event of sudden braking.
Once the car’s speed has been braked to
below 10 km/h, the brake light stops flashing
and returns to a normal steady shine - hazard
warning flashers are activated at the same
time, which flash until the driver accelerates the
car to at least 20 km/h or they are disabled with
their button, see page 92.
Emergency Brake Assistance EBA (Emergency
Brake Assist) helps to increase brake force and
so reduce braking distance. EBA detects the
driver's braking style and increases brake force
as necessary. The brake force can be reinforced up to the level when the ABS system is
engaged. The EBA function is interrupted when
the pressure on the brake pedal is reduced.
NOTE
When EBA is activated the brake pedal lowers slightly more than usual, depress (hold)
the brake pedal as long as necessary. If the
brake pedal is released then all braking
ceases.
Maintenance
To keep the car as safe and reliable as possible, follow the Volvo service intervals as speci-
129
03 Your driving environment
Foot brake
fied in the Service and Warranty Booklet, see
page 328.
IMPORTANT
The wear on the brake system's components must be checked regularly.
03
Contact a workshop for information about
the procedure or engage a workshop to
carry out the inspection - an authorised
Volvo workshop is recommended.
Symbols in the combined instrument
panel
Symbol
Specification
Constant glow – Check the
brake fluid level. If the level is
low, fill with brake fluid and
check for the cause of the brake
fluid loss.
Constant glow for 2 seconds
when the engine is started –
There was a fault in the brake
system's ABS function when
the engine was last running.
130
WARNING
If
and
illuminate at the same
time, there may be a fault in the brake system.
If the level in the brake fluid reservoir is normal at this stage, drive carefully to the nearest workshop and have the brake system
checked - an authorised Volvo workshop is
recommended.
If the brake fluid is below the MIN level in
the brake fluid reservoir, do not drive further
before topping up the brake fluid.
The reason for the loss of brake fluid must
be investigated.
03 Your driving environment
Parking brake
General
WARNING
Always apply the parking brake when parking on a slope - leaving the car in gear, or in
P if it has automatic transmission, is not sufficient to hold the car in all situations.
NOTE
- The warning symbol in the combined instrument panel comes on irrespective of whether the parking brake is applied
lightly or hard.
If the driver forgets to release the parking brake
– in addition to the illuminated warning lamp –
a pinging sound combined with a message in
the instrument panel alerts the driver of this
when the car's speed exceeds 10 km/h.
03
3. Release the foot brake pedal and make
sure that the car is at a standstill position.
4. If the vehicle moves then the parking brake
lever must be applied at least a little more
firmly.
• When parking the vehicle, always engage
1st gear (for manual gearbox) or put the
gear selector in position P (for automatic
gearbox).
Parking on a hill
If the car is parked facing uphill:
The instrument panel's warning symbol.
The lever is located between the front seats.
Applying the parking brake
1. Press the foot brake pedal down firmly.
2. Pull the lever firmly.
> The instrument panel’s warning symbol
lights up.
• Turn the wheels away from the kerb.
If the car is parked facing downhill:
• Turn the wheels towards the kerb.
Disengaging the parking brake
1. Press the foot brake pedal down firmly.
2. Pull the lever up slightly, press the button,
release the lever and release the button.
> The instrument panel’s warning symbol
goes out.
131
03 Your driving environment
HomeLinkŸ *
General
WARNING
•
03
HomeLinkŸ1 is a programmable remote control
which is integrated in the rearview mirror and
can remotely control up to three different devices (e.g. garage door opener, alarm system,
outdoor lighting and indoor lighting etc.) and in
doing so replace their remote controls. In addition to the three programmable buttons, there
is also an indicator lamp in the panel.
HomeLinkŸ cannot be activated when the car
is locked from the outside. For more information on HomeLinkŸ, visit: www.homelink.com
or ring 00 8000 466 354 65 (or premium rate
phone number, +49 6838 907 277).
1
132
If HomeLinkŸ is used to operate a
garage door or gate, make sure that
there is no-one in the vicinity of the door
or gate while it is moving.
•
The car should remain outside the
garage while a garage door opener is
being programmed.
•
Do not use HomeLinkŸ for any garage
door that does not have safety stop and
safety reverse.
Save the original remote controls for future
programming (e.g. when changing to another
car or for use in another vehicle). It is also recommended that the programming for the buttons is deleted if the car is sold. See the section
"Resetting the HomeLink® buttons" on page
133.
HomeLink and the HomeLink house symbol are registered trademarks of Johnson Controls, Inc.
* Option/accessory, for more information, see Introduction.
Programming HomeLinkŸ
NOTE
In certain vehicles the ignition must be
switched on or in "accessory position"
before HomeLinkŸ can be programmed or
used. If possible, fit new batteries in the
remote control that shall be replaced by
HomeLinkŸ for faster programming and
improved transmission of the radio signal.
The HomeLinkŸ buttons should be reset
before programming. When this has been
done HomeLinkŸ is set in "learn mode" and
ready for programming.
1. Press and hold the desired HomeLinkŸ
button until the indicator lamp flashes yellow. This indicates that the button is ready
for programming.
2. Aim the original remote control towards the
HomeLinkŸ button to be programmed and
hold it 5-30 cm from the button. Do not
obstruct the indicator lamp on
HomeLinkŸ.
3. Press and hold the button on the original
remote control. Do not release the button
until the indicator lamp has changed from
a yellow light to either red or green. If the
indicator lamp is red – make a new attempt
03 Your driving environment
HomeLinkŸ *
to program the remote control, holding the
original remote control at a different distance from the HomeLinkŸ button. A green
light indicates that programming was successful.
4. Depress the HomeLinkŸ button being
programmed, hold it depressed for
5 seconds and then release it. Repeat if
necessary until the garage door is activated. If the door is not activated, press the
programmed HomeLinkŸ button and hold
it depressed and check the indicator lamp.
> Steady green light: The indicator lamp
illuminates with a constant glow when
the button is kept depressed, this indicates that the programming is complete. The garage door, gate or similar
should now be activated when the programmed HomeLinkŸ button is
depressed.
Flashing green light: The indicator
lamp flashes while the button is held
depressed. In which case, continue with
the programming steps 5-7 in order to
complete the programming of a device
with rolling code (usually a garage door
opener).
2
3
5. Locate the "programming button2" on the
receiver for the garage door for example,
normally located close to the antenna's
bracket on the receiver.
6. Depress and release the receiver's "programming button". The button flashes for
approx. 30 seconds and the next step must
be carried out within this period.
7. While the receiver's "programming button"
is still flashing, press the button on
HomeLinkŸ being programmed and hold it
depressed for approx. 3 seconds and then
release it. Repeat the press/hold/release
sequence up to 3 times to conclude the
programming.
Operation
When HomeLinkŸ is fully programmed it can be
used in place of the separate original remote
controls.
Press and hold the programmed button3 until
the garage door, alarm system, etc. is activated
(may take several seconds). Naturally the original remote controls can still be used in parallel
with HomeLinkŸ if required.
NOTE
If the ignition is switched off, HomeLinkŸ will
work for 30 minutes after the driver's door
has been opened.
If programming problems persist, contact
HomeLinkŸ on: www.homelink.com or ring
00 8000 466 354 65 (or premium rate phone
number +49 6838 907 277).
03
Resetting the HomeLinkŸ buttons
It is only possible to reset all of the
HomeLinkŸ buttons at the same time, not each
button individually. However, individual buttons can be reprogrammed, see the following
section "Programming individual buttons".
1. Press and hold the two outer buttons on
HomeLinkŸ. Do not release them until the
indicator lamp has changed from a yellow
light to either red or green.
2. Release the buttons.
> HomeLinkŸ is now set in so-called
"learn mode" and is ready to be reprogrammed, see section "Programming
HomeLink®" on page 132.
Button designation and colour vary depending on manufacturer.
The indicator lamp remains lit while the button is held depressed.
* Option/accessory, for more information, see Introduction.
133
03 Your driving environment
HomeLinkŸ *
Programming individual buttons
To reprogram an individual HomeLinkŸ button,
proceed as follows:
1. Depress the required button and do not
release.
03
2. When the indicator lamp on HomeLinkŸ
starts to flash yellow (after about 10 seconds), release the button and start with
step 2 of section "Programming HomeLink®" on page 132.
For more information or to leave comments
about HomeLinkŸ, visit: www.homelink.com or
ring 00 8000 466 354 65 (or premium rate
phone number +49 6838 907 277).
134
* Option/accessory, for more information, see Introduction.
03 Your driving environment
03
135
136
* Option/accessory, for more information, see Introduction.
138
141
143
145
147
158
161
167
175
176
180
184
187
190
194
G000000
DSTC – Stability and traction control system.......................................
Road sign information - RSI*................................................................
Speed limiter*........................................................................................
Cruise control*......................................................................................
Adaptive cruise control*........................................................................
Distance Warning*.................................................................................
City Safety™.........................................................................................
Collision Warning with Auto Brake & Pedestrian Detection*................
Driver Alert System*..............................................................................
Driver Alert System - DAC*...................................................................
Driver Alert System - Lane Keeping Aid*..............................................
Park assist syst*....................................................................................
Park assist camera*..............................................................................
Park Assist Pilot - PAP*........................................................................
BLIS and CTA*......................................................................................
DRIVER SUPPORT
04 Driver support
DSTC – Stability and traction control system
General information on DSTC
The stability and traction control system, DSTC
(Dynamic Stability & Traction Control) helps the
driver to avoid skidding and improves the car's
traction.
The activation of the system during braking
may be noticed as a throbbing sound. The car
may accelerate slower than expected when the
accelerator pedal is depressed.
04
WARNING
The stability and traction control system is
a supplementary function - it cannot handle
all situations in all road conditions.
The driver always bears responsibility for
ensuring that the vehicle is driven safely and
that applicable road traffic rules and regulations are followed.
Active Yaw Control
The function limits the driving and brake force
of the wheels individually in order to stabilise
the car.
Spin Control
The function reduces engine power if the drive
wheels slip against the underlying surface in
order to maintain stability and traction.
138
Traction control system
The function is active at low speed and transfers power from the driving wheel that is spinning to the one that is not.
Engine drag control - EDC
EDC (Engine Drag Control) prevents involuntary wheel locking, e.g. after shifting down or
engine braking when driving in low gears on
slippery road surfaces.
Involuntary wheel locking while driving can,
amongst other things, impair the driver's ability
to steer the car.
should be steered to maintain/achieve maximum possible traction and stabilise the car.
Trailer Stability Assist* - TSA
The function serves to stabilise the car and
trailer combination if it begins to snake, see
page 299.
NOTE
The function is deactivated if the driver
selects Sport mode.
Operation
Corner Traction Control – CTC
CTC compensates for understeer and allows
higher than normal acceleration in a bend without wheelspin on the inner wheel, e.g. on an
arcing motorway entrance road to quickly
reach the prevailing traffic speed.
Driver Steering Recommendation – DSR
DSR (Driver Steering Recommendation) helps
the driver steer the car in the right direction
when there is reduced traction or when the
ABS system engages.
The primary role of the DSR function is to help
the driver steer in the right direction when the
car is skidding.
DSR engages by applying slight torque to the
steering wheel in the direction in which the car
* Option/accessory, for more information, see Introduction.
Selection of level - Sport mode
The DSTC system is always activated - it cannot be deactivated.
However, the driver can select the Sport mode,
which allows for a more active driving experience. In Sport mode the system detects
whether the accelerator pedal, steering wheel
movements and cornering are more active than
in normal driving and then allows controlled
skidding with the rear section up to a certain
level before it intervenes and stabilises the car.
If the driver stops a controlled skid by releasing
the accelerator pedal then the DSTC system
intervenes and stabilises the car.
04 Driver support
DSTC – Stability and traction control system
With Sport mode, maximum traction is
obtained if the car has become stuck, or when
driving on a loose surface - e.g. sand or deep
snow.
Proceed as follows to select Sport mode:
1. Press the centre console button MY CAR
and search in the display screen's menu
system and locate My V40 DSTC. (For
information on the menu system, see
page 203).
2. Uncheck the box and back out of the menu
system with EXIT.
> The system then allows a more sporty
driving style.
The Sport mode is active until the driver deselects it or until the engine is switched off - after
the engine is started the next time the DSTC
system is back in its normal mode again.
Symbols and messages in the display
SymbolA
04
Message
Specification
DSTC Temporarily OFF
DSTC system temporarily reduced due to excessive brake disc temperature. - The function is reactivated automatically when the brakes have cooled.
DSTC Service required
DSTC system disengaged.
• Stop the car in a safe place, switch off the engine and start it again.
• Visit a workshop if the message remains - an authorised Volvo workshop is recommended.
"Message"
There is a message on the speedometer's display - Read it!
Constant glow for 2 seconds.
System check when the engine is started.
and
``
139
04 Driver support
DSTC – Stability and traction control system
SymbolA
Message
Specification
Flashing light.
DSTC system is being activated.
Sport mode is activated.
A
04
140
The symbols are schematic.
04 Driver support
Road sign information - RSI*
General information on RSI
WARNING
RSI does not work in all situations but is
designed merely as a supplementary aid.
The driver always bears ultimate responsibility for ensuring that the vehicle is driven
safely and that applicable road traffic rules
and regulations are followed.
Together with the symbol for
the current speed limit, a sign
showing that overtaking is
prohibited may also be displayed where appropriate.
Additional signs
Operation
04
Examples of readable speed related1 signs.
The Road sign information function (RSI – Road
Sign Information) helps the driver to remember
which road signs the car has passed through
information on - among other things - the current speed, the start/end of a motorway or
road, and when overtaking is prohibited.
If a sign for both a motorway/road for motorised traffic and a sign showing the maximum
permitted speed are passed, RSI decides to
show the sign symbol for maximum permitted
speed.
Examples of additional signs1.
Recorded speed information.
When RSI has recorded a road sign with an
imposed speed, the sign is displayed as a symbol on the instrument panel.
Sometimes different speed limits are signposted for the same road - an additional sign then
indicates the circumstances under which the
different speeds apply. The road section may
be particularly susceptible to accidents in rain
and/or fog, for example.
An additional sign relating to rain is displayed
only if the windscreen wipers are in use.
1
Road signs which are displayed in the instrument panel are dependent on the market - the illustration shows examples only.
* Option/accessory, for more information, see Introduction.
141
04 Driver support
Road sign information - RSI*
The speed applicable on an
exit is indicated by means of
an additional sign containing
an arrow. The arrow is displayed under the symbol
showing the speed.
Speed signs linked to this type of additional
sign are displayed only if the driver is using the
direction indicator.
04
Limited distance or time of day
Some speeds are applicable
only after a specific distance
or at a certain time of day. The
driver's attention is drawn to
the situation by means of an
empty frame under the symbol showing the speed.
The instrument panel’s speed symbol display
can be disabled. To deactivate the RSI function:
• Uncheck the option in MY CAR Settings
Car settings Road Sign
Information and go back out of the menu
by pressing EXIT, see page 205.
Speed warning
The driver can opt to receive a warning (Speed
Alert) when the applicable speed limit is exceeded by 5 km/h or more. This warning is given
by the symbol showing the applicable maximum speed temporarily flashing when this
speed is exceeded.
To activate speed warning:
• Check speed warning in MY CAR
Settings Car settings Speed alert
and go back out of the menu by pressing
EXIT, see page 205.
Setting in MY CAR
Limitations
The RSI function's camera sensor is limited just like the human eye. Find out more about
this on page 171.
Options in MY CAR.
142
Signs which indirectly provide information on a
prevailing speed limit, e.g. name signs for
towns/districts, are not recorded by the RSI
function.
* Option/accessory, for more information, see Introduction.
Here are some other examples of what can
disrupt the function:
•
•
•
•
•
Faded signs
Signs positioned on bends
Rotated or damaged signs
Concealed or poorly positioned signs
Signs completely or partly covered with
frost, snow and/or dirt.
04 Driver support
Speed limiter*
General information on the speed
limiter
A (Speed Limiter) can be regarded as a reverse
cruise control - the driver regulates the speed
using the accelerator pedal but is prevented
from accidentally exceeding a pre-selected/set
speed by the speed limiter.
Operation
Selected speed
Speed limiter active
Switch on and activate
When the speed limiter is active, its symbol (6)
is displayed in combination with a mark (5) by
the set maximum speed in the display.
Selection and storage of the highest possible
speed in the memory can be made both during
a journey and while stationary.
2. Scroll with the
button until the instrument panel display shows a mark (5) next
to the desired maximum speed.
> The speed limiter is then active and the
selected max. speed is stored in the
memory.
Changing the speed
To change the stored speed:
• Adjust with short presses on
or
every press gives +/- 5 km/h. The last
presses made are stored in the memory.
While driving
1. Press the steering wheel button
to
switch on the speed limiter.
> The symbol (6) for the speed limiter is
illuminated on the instrument panel display.
Steering wheel keypad and instrument panel (Digital or Analogue).
Speed limiter - On/Off.
Standby mode ceases and the stored
speed is resumed.
Standby mode
Activate and adjust the max. speed.
2. When the car is moving at the desired highest possible speed: Press one of the steering wheel buttons
or
until the instrument panel display shows a mark (5) next
to the desired maximum speed.
> The speed limiter is then active and the
selected max. speed is stored in the
memory.
When stationary
1. Press the steering wheel button
switch on the speed limiter.
to
04
To adjust +/- 1 km/h:
• Hold down the button and release it when
the instrument panel’s display shows a
mark (5) next to the desired maximum
speed.
Temporary deactivation - standby mode
To temporarily deactivate the speed limiter and
set it in standby mode:
–
Press
.
> The display mark (5) changes colour
from GREEN to WHITE (Digital) or from
WHITE to GREY (Analogue) and the
driver can temporarily exceed the set
maximum speed.
``
* Option/accessory, for more information, see Introduction.
143
04 Driver support
Speed limiter*
The speed limiter is reactivated with one
press on . The mark (5) in the display
then changes colour from WHITE to
GREEN (Digital) or GREY to WHITE
(Analogue) and the car's maximum
speed is limited again.
Temporary deactivation with the
accelerator pedal
04
Alarm for speed exceeded
On steep roads the engine braking effect may
be inadequate and the selected maximum
speed exceeded. The driver is alerted about
this with an acoustic signal.
The signal is active until the driver has slowed
to below the selected maximum speed.
NOTE
The speed limiter can also be set in standby
mode with the accelerator pedal, e.g. for rapidly accelerating the car out of a situation:
–
Depress the accelerator pedal fully.
> The display shows the stored maximum
speed with a coloured mark (5) and the
driver can temporarily exceed the set
maximum speed – the display mark (5)
changes colour from GREEN to WHITE
(Digital) or WHITE to GREY (Analogue)
during that time.
The alarm is only activated after 5 seconds
if the speed has been exceeded by at least
3 km/h provided that none of the buttons
or
has been depressed during the last
half minute.
Deactivate
To deactivate the speed limiter:
–
The speed limiter is automatically reactivated after the accelerator pedal is
released and the car's speed is slowed
down to below the selected/stored
maximum speed - the mark (5) in the
display changes colour from WHITE to
GREEN (Digital) or GREY to WHITE
(Analogue) and the car's maximum
speed is again limited.
144
* Option/accessory, for more information, see Introduction.
Press the steering wheel button
.
> The display's speed limiter symbol (6)
and the set speed mark (5) are cleared.
The selected and stored speed are thus
deleted from the memory and cannot be
button.
resumed with the
The driver can then use the accelerator
pedal to choose a speed without limitation.
04 Driver support
Cruise control*
General information on CC
Operation
The cruise control (CC – Cruise Control) helps
the driver maintain an even speed, resulting in
more relaxing driving on motorways and long,
straight roads with regular traffic flows.
WARNING
The driver must always be observant with
regard to the traffic conditions and intervene
when the cruise control is not maintaining a
suitable speed and/or suitable distance.
The driver always bears ultimate responsibility for ensuring that the vehicle is driven
safely.
04
The steering wheel buttons and display in cars
without speed limiter1.
The steering wheel buttons and display in cars
with speed limiter1.
Cruise control - On/Off.
Standby mode ceases and the stored
speed is resumed.
Standby mode
Activate and adjust the speed.
Selected speed (GREY = Standby mode).
Cruise control active - WHITE symbol
(GREY = Standby mode).
Activating and setting the speed
To enable cruise control:
• Press the steering wheel button
1
A Volvo dealer has updated information about what applies in each respective market.
* Option/accessory, for more information, see Introduction.
145
04 Driver support
Cruise control*
>
Symbol (6) in the display changes from
GREY to WHITE and shows that the cruise
control is in standby mode.
If any of the Cruise Control buttons are held
depressed for several minutes then it is
blocked and deactivated. To be able to
reactivate Cruise Control, the car must be
stopped and the engine restarted.
To activate cruise control:
• At the required speed - press the steering
wheel button
>
04
or
.
The current speed is stored in the memory
and the display dot (5) comes on at the
selected speed.
NOTE
Cruise Control cannot be enabled at speeds
below 30 km/h.
Changing the speed
To change the stored speed:
• Adjust with short presses on
or
every press gives +/- 5 km/h. The last
presses made are stored in the memory.
To adjust +/- 1 km/h:
• Hold down the button and release it at the
required speed.
A temporary increase in speed with the accelerator pedal, e.g. during overtaking, does not
affect the cruise control setting - the car returns
to the set speed when the accelerator pedal is
released.
146
Resume set speed
NOTE
Temporary deactivation - standby mode
To temporarily disengage cruise control and
set it in standby mode:
• Press
>
.
The display dot (5) and symbol (6) change
colour from WHITE to GREY.
Automatic standby mode
Cruise control is temporarily disengaged and
set in standby mode if:
•
•
•
•
•
wheels lose traction
the foot brake is used
speed falls below approx. 30 km/h
the clutch pedal is depressed
the gear selector is moved to neutral position (automatic gearbox)
• the driver maintains a speed higher than
the set speed for longer than 1 minute.
The driver must then regulate the speed.
* Option/accessory, for more information, see Introduction.
To reactivate the cruise control from standby
mode:
• Press the steering wheel button
>
.
The display dot (5) and symbol (6) change
colour from GREY to WHITE and the speed
is then set to the last speed stored.
NOTE
A marked speed increase may occur once
the speed has been resumed by selecting
.
Deactivate
The cruise control is switched off with the
steering wheel button (1) or by switching off the
engine - the set speed is deleted from the
memory and cannot be resumed with the
button.
04 Driver support
Adaptive cruise control*
General information on ACC
The adaptive cruise control (ACC – Adaptive
Cruise Control) helps the driver maintain a safe
distance from the vehicle ahead. Adaptive
cruise control provides a more relaxing driving
experience on long journeys on motorways
and long straight main roads in smooth traffic
flows.
The driver sets the desired speed and time
interval to the car in front. When the radar
detector detects a slower vehicle in front of the
car, the speed is automatically adapted to that.
When the road is clear again the car returns to
the selected speed.
If the adaptive cruise control is switched off or
set to the standby mode and the car comes too
close to a vehicle in front, then the driver is
warned instead by Distance Warning (see
page 158) about the short distance.
Function
WARNING
The driver must always be observant with
regard to the traffic conditions and intervene
when the adaptive cruise control is not
maintaining a suitable speed or suitable distance.
The adaptive cruise control cannot handle
all traffic, weather and road conditions.
Read the whole of this section for information on the limitations of the adaptive cruise
control. The driver must be familiar with this
information before using the adaptive cruise
control.
The driver always bears responsibility for
maintaining the correct distance and speed,
even when the adaptive cruise control is
being used.
04
Function overview1.
Warning lamp - braking by driver required
Steering wheel keypad
Radar sensor
IMPORTANT
Maintenance of adaptive cruise control
components must only be performed at a
workshop - an authorised Volvo workshop
is recommended.
Adaptive cruise control consists of a cruise
control system and a coordinated spacing system.
Automatic gearbox
Cars with automatic gearbox have enhanced
functionality with the adaptive cruise control's
Queue Assistant, see page 152.
1
NOTE: The illustration is schematic - details may differ depending on car model.
* Option/accessory, for more information, see Introduction.
147
04 Driver support
Adaptive cruise control*
WARNING
Adaptive cruise control is not a collision
avoidance system. The driver must intervene if the system does not detect a vehicle
in front.
The adaptive cruise control does not brake
for humans or animals, and not for small
vehicles such as bicycles and motorcycles.
Nor for oncoming, slow or stationary vehicles and objects.
Do not use the adaptive cruise control, for
example, in city traffic, in dense traffic, at
junctions, on slippery surfaces, with a lot of
water or slush on the road, in heavy rain/
snow, in poor visibility, on winding roads or
on slip roads.
04
The distance to the vehicle ahead is mainly
measured by a radar sensor. Cruise control
regulates the speed with acceleration and
braking. It is normal for the brakes to emit a low
sound when they are being used by the adaptive cruise control.
WARNING
The brake pedal moves when Cruise Control brakes. Do not rest your foot beneath
the brake pedal as it may become trapped.
2
148
The adaptive cruise control aims to follow the
vehicle ahead in the same lane at a time interval
set by the driver. If the radar sensor cannot see
any vehicle in front then the car will instead
maintain the cruise control's set speed. This
also happens if the speed of the vehicle in front
exceeds the cruise control's set speed.
The adaptive cruise control aims to control the
speed in a smooth way. In situations that
demand sudden braking the driver must brake
himself/herself. This applies with large differences in speed, or if the vehicle in front brakes
heavily. Due to limitations in the radar sensor,
braking may come unexpectedly or not at all,
see page 154.
The adaptive cruise control can be activated to
follow another vehicle at speeds from
30 km/h2 up to 200 km/h. If the speed falls
below 30 km/h or if the engine speed becomes
too low, the cruise control is set in standby
mode at which automatic braking ceases - the
driver must then take over himself/herself to
maintain a safe distance to the vehicle ahead.
Warning lamp - braking by driver
required
Adaptive cruise control has a braking capacity
that is equivalent to more than 40% of the car's
braking capacity.
Queue Assistant (in cars with automatic gearbox) can operate in the range of 0-200 km/h, see page 152.
* Option/accessory, for more information, see Introduction.
If the car needs to be braked more heavily than
cruise control capacity and the driver does not
brake, then the cruise control uses the collision
warning system's warning lamp and warning
sound (see figure on page 167) to alert the
driver that immediate intervention is required.
NOTE
The warning lamp may be difficult to see in
strong sunlight or when wearing sunglasses.
WARNING
Cruise Control warns only of vehicles which
the radar sensor has detected. Hence the
warning may not be given, or it may be given
with a certain delay. Do not wait for a warning without braking when so required.
Steep roads and/or heavy load
Bear in mind that the adaptive cruise control is
primarily intended for use when driving on level
road surfaces. It may have difficulty in keeping
the correct distance from the vehicle ahead
when driving on steep downhill slopes, with a
heavy load or with a trailer - in which case, be
extra attentive and ready to slow down.
04 Driver support
Adaptive cruise control*
Operation
Time distance
Time distance
The design of the steering wheel keypad differs
depending on whether the car is equipped with
the speed limiter3.
ACC is active at the GREEN symbol
(WHITE = standby mode).
ACC is active at the GREEN symbol
(WHITE = standby mode).
WITH speed limiter
WITHOUT speed limiter
Activating and setting the speed
To enable cruise control:
• Press the steering wheel button
- a similar WHITE symbol comes on in the display
(6) which shows the cruise control is in
standby mode.
04
To activate cruise control:
• At the required speed - press the steering
wheel button
>
Cruise control - On/Off.
Standby mode ceases and the stored
speed is resumed.
Standby mode
Time interval - Increase/decrease.
Activate and adjust the speed.
Green marking at stored speed (WHITE =
standby mode).
3
Standby mode ceases and the stored
speed is resumed.
Cruise control - On/Off or Standby mode.
Time interval - Increase/decrease.
Activate and adjust the speed.
or
.
The current speed is stored in the memory,
the display shows a "magnifying glass"
around the selected speed for a second or
so and its marking (6) changes from WHITE
to GREEN.
When this display symbol changes
colour from WHITE to GREEN, the
cruise control is active and the car maintains
the stored speed.
(Not used)
Green marking at stored speed (WHITE =
standby mode).
A Volvo dealer has updated information about what applies in each respective market.
``
* Option/accessory, for more information, see Introduction.
149
04 Driver support
Adaptive cruise control*
Only when the display shows
a picture of another vehicle is
the distance to the vehicle in
front controlled by the cruise
control.
At the same time a speed
range is marked:
• the higher speed with
GREEN marking (6) is the preprogrammed speed
04
• the lower speed is the speed
of the car in front.
Changing the speed
To change the stored speed:
• Adjust with short presses on
or
every press gives +/- 5 km/h. The last
presses made are stored in the memory.
If speed is increased using the accelerator
pedal prior to pressing the
/
button,
then it is the car's current speed when the
button is pressed that is stored in the
cruise control.
To adjust +/- 1 km/h:
•
150
Hold down the button and release it at the
required speed.
NOTE
If any of the Cruise Control buttons are held
depressed for several minutes then it is
blocked and deactivated. To be able to
reactivate Cruise Control, the car must be
stopped and the engine restarted.
In certain situations, cruise control cannot
be activated. Then the display shows
Cruise control Unavailable, see
page 156.
Different time intervals to the
vehicle in front can be
selected and shown in the
display as 1-5 horizontal lines
- the more lines the longer the
time interval. One line corresponds to
approximately 1 second to the vehicle in front,
5 lines approximately 3 seconds.
To set/change the time distance:
• Turn the steering wheel button set's
buttons for
At low speed, when the distances are short, the
adaptive cruise control increases the time
interval slightly.
* Option/accessory, for more information, see Introduction.
Note that a short time interval only allows the
driver a short time to react and take action if
any unforeseen traffic problem should arise.
The same symbol is also shown when Distance
Warning is activated, see page 158.
NOTE
Set time interval
/
thumbwheel (or use the
cars without Speed limiters).
The adaptive cruise control allows the time
interval to vary noticeably in certain situations
in order to allow the car to follow the vehicle in
front smoothly and comfortably.
Only use the time intervals permitted by
local traffic regulations.
If Cruise Control does not appear to react
when activated, this may be because the
time distance to the car in front is preventing
an increase in speed.
The higher the speed the longer the calculated distance in metres for a given time
interval.
Temporary deactivation - standby mode
To temporarily disengage cruise control and
set it in standby mode:
• Press the steering wheel button
This display symbol and stored speed
marking then changes colour from
GREEN to WHITE.
04 Driver support
Adaptive cruise control*
Keypad without Speed limiter*
To temporarily disengage cruise control and
set it in standby mode:
• Press the steering wheel button
.
Standby mode due to driver intervention
Cruise control is temporarily disengaged and
set automatically in standby mode if:
• the foot brake is used
• the clutch pedal is depressed for longer
than 1
minute4
• the gear selector is moved to N position
(automatic gearbox)
• the driver maintains a speed higher than
the set speed for longer than 1 minute.
The driver must then regulate the speed.
A temporary increase in speed with the accelerator pedal, e.g. during overtaking, does not
affect the cruise control setting - the car returns
to the last stored speed when the accelerator
pedal is released.
Automatic standby mode
If any of these systems stop working then
cruise control is automatically deactivated.
NOTE
In the event of automatic deactivation a signal
will sound and the message Cruise control
Cancelled is shown in the display. The driver
must then intervene and adapt the speed and
distance to the vehicle ahead.
An automatic deactivation can be due to:
•
•
•
•
•
•
•
the driver opens the door
the driver takes off his seatbelt
engine speed is too low/high
A marked speed increase may occur once
the speed has been resumed by selecting
.
Overtaking another vehicle
When the car is following another vehicle and
the driver indicates an impending overtake with
the direction indicator6, the cruise control helps
to briefly accelerate the car towards the vehicle
in front.
04
This function is active at speeds
above 70 km/h.
speed falls below 30 km/h5
wheels lose traction
brake temperature is high
WARNING
the radar sensor is covered e.g. by wet
snow or heavy rain (radar waves blocked).
Resume set speed
Cruise control in standby mode is re-activated
with one press on the steering wheel button
- the speed is then set to the last stored
speed.
The adaptive cruise control is dependent on
other systems, such as DSTC (see page 138).
Be aware that this function can be activated
in more situations other than during overtaking, e.g. when a direction indicator is
used to indicate a change of lane or exit to
another road - the car will then accelerate
briefly.
Deactivate
Keypad with Speed limiter
The adaptive cruise control is disengaged with
a short press of the steering wheel button
.
4
5
6
Disengaging and selecting a higher or lower gear does not involve standby mode.
Does not apply to a car with Queue Assistant - it manages right down to stationary.
On left flash only in left-hand-drive car, or right flash in right-hand-drive car.
* Option/accessory, for more information, see Introduction.
151
04 Driver support
Adaptive cruise control*
pad without speed limiter". ACC will be activated the next time the system is switched on.
The set speed is cleared and cannot be
button.
resumed with the
Keypad without Speed limiter
A short press on the steering wheel button
sets cruise control to standby mode. With
a further short press the cruise control is deactivated. The set speed is cleared and cannot be
button.
resumed with the
Queue Assistant
Switch from ACC to CC
• Extended speed range - also below 30 km/
A button press can be used to deactivate the
adaptive element (spacing system) in the
cruise control, the car then only following the
set speed.
• Change of target
• Automatic braking ceases when stationary
• Hold down the steering wheel button
the display’s symbol changes from
.
>
h and at standstill
to
This activates the standard cruise control
CC (Cruise Control), see page 145.
For shorter stops in connection with inching in
slow traffic or at traffic lights driving is automatically resumed if the stops do not exceed
about 3 seconds - if it takes longer before the
car in front starts moving again then the cruise
control is set in standby mode with automatic
braking. The driver must then re-activate the
cruise control in one of the following ways:
or
Extended speed range
• Depress the accelerator pedal.
NOTE
In order to activate the cruise control the
driver's door must be closed and the driver
must be wearing the seatbelt.
Switch from CC back to ACC
Deactivate CC with 1-2 presses on
as
described under the heading "Switch off – Key-
152
Activation of the cruise control below
30 km/h requires a vehicle in front within a
reasonable distance.
Note that the lowest programmable speed for
the cruise control is 30 km/h - even though the
cruise control is capable of following another
vehicle down to a standstill, a lower speed
cannot be selected.
WARNING
The car no longer brakes automatically after
switching from ACC to CC - it merely follows
the set speed.
NOTE
In cars with automatic gearbox the adaptive
cruise control is supplemented with the Queue
Assist function (also referred to as "Queue
Assist").
Queue Assistant has the following functions:
04
With an automatic gearbox, the cruise control
can follow another vehicle within the range
0-200 km/h.
* Option/accessory, for more information, see Introduction.
• Press the steering wheel button
>
.
The cruise control will then resume following the vehicle in front.
04 Driver support
Adaptive cruise control*
NOTE
WARNING
Queue Assist can keep the car stationary for
a maximum of 4 minutes - then the brakes
release.
When the cruise control is following another
vehicle at speeds in excess of 30 km/h and
the target is changed from a moving vehicle
to a stationary vehicle, the cruise control will
ignore the stationary vehicle and instead
select the stored speed.
See more information under the header
below, "Cessation of automatic braking
when stationary".
•
Change of target
The driver must intervene him/herself
and brake.
Automatic standby mode with change of
target
Cruise control is disengaged and set in
standby mode:
•
If the target vehicle in front suddenly turns then
there may be stationary traffic in front.
When the cruise control is following another
vehicle at speeds below 30 km/h and changes
target from a moving to a stationary vehicle, the
cruise control will slow down for the stationary
vehicle.
when the speed is below 5 km/h and cruise
control is not sure whether the target
object is a stationary vehicle or some other
object, e.g. a speed bump.
• when the speed is below 5 km/h and the
vehicle in front turns off so the cruise control no longer has a vehicle to follow.
This means that the brakes are released and
the car will start to roll - the driver must therefore intervene and brake the car himself in
order to maintain its position.
IMPORTANT
Queue Assist can keep the car stationary for
a maximum of 4 minutes - then the brakes
release.
The driver's attention is drawn to this over
several stages, with increasing intensity:
04
1. Acoustic alarm (pinging) and text message.
2. A warning lamp in the windscreen also
starts to flash.
3. "Stabbing" braking occurs.
Queue Assist releases the foot brake and is set
to standby mode in these situations as well:
• the driver puts his/her foot on the brake
pedal
Termination of automatic braking at a
standstill
• the gear selector is moved to P, N or R
In the following situations, Queue Assist stops
automatic braking at a standstill:
• the driver sets the cruise control in standby
• the driver opens the door
• the driver takes off his seatbelt
• the parking brake is applied.
position
mode
* Option/accessory, for more information, see Introduction.
153
04 Driver support
Adaptive cruise control*
The radar sensor and its limitations
The radar sensor is used - apart from by Adaptive cruise control - by the following functions
as well:
• Collision Warning with Auto Brake, see
page 167
• Distance Warning, see page 158.
04
The function of the radar sensor is to detect
cars or larger vehicles in the same direction, in
the same lane.
Modification of the radar sensor could result in
it being illegal to use.
WARNING
The driver must always be observant with
regard to the traffic conditions and intervene
when the adaptive cruise control is not
maintaining a suitable speed or suitable distance.
The adaptive cruise control cannot handle
all traffic, weather and road conditions.
Read the whole of this section for information on the limitations of the adaptive cruise
control. The driver must be familiar with this
information before using the adaptive cruise
control.
The driver always bears responsibility for
maintaining the correct distance and speed,
even when the adaptive cruise control is
being used.
WARNING
Accessories or other objects such as auxiliary lamps must not be fitted in front of the
grille.
WARNING
Adaptive cruise control is not a collision
avoidance system. The driver must intervene if the system does not detect a vehicle
in front.
The adaptive cruise control does not brake
for humans or animals, and not for small
vehicles such as bicycles and motorcycles.
Nor for oncoming, slow or stationary vehicles and objects.
Do not use the adaptive cruise control, for
example, in city traffic, in dense traffic, at
junctions, on slippery surfaces, with a lot of
water or slush on the road, in heavy rain/
snow, in poor visibility, on winding roads or
on slip roads.
The capacity of the radar sensor to detect vehicles in front is reduced significantly:
• if the radar sensor becomes blocked and
cannot detect other vehicles e.g. in heavy
rain or slush, or if other objects have collected in front of the radar sensor.
NOTE
Keep the area in front of the radar sensor
clean - see the "Maintenance" page 170
• if the speed of vehicles in front is significantly different from your own speed.
154
* Option/accessory, for more information, see Introduction.
04 Driver support
Adaptive cruise control*
Examples where the cruise control does
not work optimally
The radar sensor has a limited field of vision. In
some situations another vehicle is not
detected, or the detection is made later than
expected.
Sometimes the radar sensor is late at
detecting vehicles at close distances, e.g.
a vehicle that drives in between the car and
vehicles in front.
Small vehicles, such as motorcycles, or
vehicles not driving in the centre of the lane
can remain undetected.
In bends the radar sensor may detect the
wrong vehicle or lose a detected vehicle
from view.
04
Fault tracing and action
If the display shows the message Radar
blocked See manual this means that the
radar signals from the radar sensor are blocked
and that vehicles in front of the car could not
be detected.
In turn this means that - apart from Adaptive
Cruise Control - Distance Warning and Collision Warning with Auto Brake functions are not
operating either.
The following table presents possible causes
for a message being shown along with the
appropriate action.
ACC field of vision.
``
* Option/accessory, for more information, see Introduction.
155
04 Driver support
Adaptive cruise control*
Cause
Action
The radar surface in the grille is dirty or covered with ice or snow.
Clean the radar surface in the grille from dirt, ice and snow.
Heavy rain or snow blocking the radar signals.
No action. Sometimes the radar does not work during heavy rain or
snowfall.
Water or snow from the road surface swirls up and blocks the radar signals.
No action. Sometimes the radar does not work on a very wet or snowy
road surface.
The radar surface has been cleaned but the message remains.
Wait. It could take several minutes for the radar to sense that it is no
longer blocked.
04
Symbols and messages in the display
SymbolA
Message
Specification
The symbol is WHITE
Adaptive cruise control is set to standby mode.
The symbol is GREEN
The car maintains the stored speed.
Standard cruise control is selected manually.
156
DSTC Normal to enable Cruise
The adaptive cruise control cannot be activated until DSTC has been set to Normal position
- see page 138.
Cruise control Cancelled
The adaptive cruise control has been deactivated - the driver has to regulate the speed himself.
* Option/accessory, for more information, see Introduction.
04 Driver support
Adaptive cruise control*
SymbolA
Message
Specification
Cruise control Unavailable
The adaptive cruise control cannot be activated.
This could be due to:
• brake temperature is high
• the radar sensor is blocked by e.g. wet snow or rain.
Radar blocked See manual
The adaptive cruise control is temporarily disengaged.
• The radar sensor is blocked and cannot detect other vehicles. For example, in the event
of heavy rain or if slush has collected in front of the radar sensor.
04
The driver can then choose to switch to ordinary Cruise control (CC), see page 152 - a display
text provides information on appropriate alternatives.
Read about the limitations of the radar sensor, see page 154.
Cruise control Service required
The adaptive cruise control is disengaged.
• Contact a workshop - an authorised Volvo workshop is recommended.
Press Brake To hold + acoustic
alarm + warning light in windscreen +
"pulling" brakes
(Only with Queue Assistant)
Below 30 km/h Only following
(Only with Queue Assistant)
A
The car is at a standstill and the adaptive cruise control will release the foot brake, which is
why the car may start rolling soon.
• The driver must brake himself/herself. The message remains and the alarm sounds until
the driver depresses the brake pedal or uses the accelerator pedal.
Shown with attempts to activate the adaptive cruise control at speeds below 30 km/h without
a vehicle in front within the activation distance (approx. 30 metres).
The symbols are schematic.
* Option/accessory, for more information, see Introduction.
157
04 Driver support
Distance Warning*
General
Distance Warning (Distance Alert) is a function
that informs the driver about the time interval
to vehicles in front.
Distance Warning is active at speeds above
30 km/h and only reacts to vehicles driving in
front of the car, in the same direction. No distance information is provided for oncoming,
slow or stationary vehicles.
NOTE
Distance warning is deactivated during the
time the adaptive cruise control is active.
WARNING
Distance warning only reacts if the distance
to the vehicle ahead is shorter than the preset value - the speed of the driver's vehicle
is not affected.
Some combinations of the selected equipment
leave no vacant space for a button in the centre
console - in which case the function is handled
by the car's menu system MY CAR under
Settings Car settings Distance Alert.
For a description of the menu system - see
page 203.
Set time interval
04
Operation
Controls and display for time interval.
Orange warning lamp1.
Time interval - Increase/decrease.
An orange warning lamp in the windscreen illuminates with a constant glow if the distance to
the vehicle in front is shorter than the set time
interval.
Time interval - On (during adjustment).
1
158
Press the button in the centre console to switch
the function on or off. The function is switched
on if one lamp is illuminated in the button.
NOTE: The illustration is schematic - details may vary depending on car model.
* Option/accessory, for more information, see Introduction.
04 Driver support
Distance Warning*
Different time intervals to the
vehicle in front can be
selected and shown in the
display as 1-5 horizontal lines
- the more lines the longer the
time interval. One line corresponds to
approximately 1 second to the vehicle in front,
5 lines approximately 3 seconds.
The same symbol is also shown when adaptive
cruise control is activated.
NOTE
The higher the speed the longer the calculated distance in metres for a given time
interval.
The set time interval is also used by the
Adaptive Cruise Control function, see
page 147.
Limitations
The function uses the same radar sensor as
adaptive cruise control and the collision warning system. For more information on the radar
sensor and its limitations, see page 154.
Extremely high speeds can also cause the
lamp to illuminate at a shorter distance than
that set due to limitations in sensor range.
NOTE
Strong sunlight, reflections or strong variations in light intensity, as well as wearing
sunglasses, could mean that the warning
light in the windscreen cannot be seen.
04
Poor weather or winding roads could affect
the radar sensor's capacity to detect vehicles in front.
The size of other vehicles could also affect
detection capacity, e.g. motorcycles. This
could mean that the warning lamp illuminates at a shorter distance than the setting
or that the warning is temporarily absent.
Only use the time interval permitted by the
local traffic regulations.
* Option/accessory, for more information, see Introduction.
159
04 Driver support
Distance Warning*
Symbols and messages in the display
SymbolA
Message
Specification
Radar blocked See manual
Distance Warning temporarily disengaged.
The radar sensor is blocked and cannot detect other vehicles, e.g. in the event of heavy rain
or if slush has collected in front of the radar sensor.
Read about the limitations of the radar sensor, see page 154.
Collision warn. Service required
Visit a workshop if the message remains - an authorised Volvo workshop is recommended.
04
A
160
Distance Warning and Collision Warning with Auto Brake fully or partially disengaged.
The symbols are schematic.
* Option/accessory, for more information, see Introduction.
04 Driver support
City Safety™
General
City Safety™ is a function for helping the driver
to avoid a collision when driving in queues,
amongst other things, when changes in the
traffic ahead, combined with a lapse in attention, could lead to an incident.
The function is active at speeds under
50 km/h and it helps the driver by automatically
braking the car in the event of imminent risk of
collision with vehicles in front, should the driver
not react in time by braking and/or steering
away.
City Safety™ is activated in situations where
the driver should have started braking earlier,
which is why it cannot help the driver in every
situation.
If the car is also equipped with a Collision
Warning function with Auto Brake*, these two
systems complement each other. For more
information on Collision Warning function with
Auto Brake, see page 167.
IMPORTANT
Maintenance and replacement of City
Safety™ components must only be performed by a workshop - an authorised Volvo
workshop is recommended.
WARNING
City Safety™ does not react to vehicles
driving in a different direction from the car,
to small vehicles, motorcycles and bicycles
or to humans and animals.
City Safety™ must not be used as an excuse
for the driver to change his/her driving style. If
the driver solely relies on City Safety™ to do
the braking, there will be a collision sooner or
later.
City Safety™ can prevent collision at a
speed difference of less than 15 km/h - at a
higher speed difference, it is only possible
to reduce collision speed. In order to obtain
full brake function, the driver must depress
the brake pedal.
1
04
Laser sensor transmitter and receiver window1.
City Safety™ does not engage in all driving
situations or traffic, weather or road conditions.
City Safety™ is designed to be activated as
late as possible in order to avoid unnecessary
intervention.
The driver or passengers normally only notice
City Safety™ if a situation arises where the car
is extremely close to being in a collision.
Function
Never wait for City Safety™ to engage. The
driver always bears responsibility for maintaining the proper distance and speed.
City Safety™ detects the traffic in front of the
car with a laser sensor fitted in the top edge of
the windscreen. If there is an imminent risk of
collision, City Safety™ will automatically brake
the car, which may be experienced as sudden
braking.
If the speed difference is 4-15 km/h in relation
to the vehicle in front then City Safety™ can
completely prevent a collision.
City Safety™ activates a short, sharp braking
and stops the car in normal circumstances, just
behind the vehicle in front. For most drivers this
is well outside normal driving style and may be
experienced as being uncomfortable.
NOTE: The illustration is schematic - details may vary depending on car model.
* Option/accessory, for more information, see Introduction.
161
04 Driver support
City Safety™
If the difference in speed between the vehicles
is greater than 15 km/h then City Safety™ may
not prevent the collision on its own. To obtain
full brake force, the driver must depress the
brake pedal. This could then make it possible
to prevent a collision, even at speed differences above 15 km/h.
• Using MY CAR on the centre console dis-
When the function is activated and brakes, the
instrument panel display shows a message to
the effect that the function is/has been active.
However, the function will be enabled the
next time the engine is started, regardless
of whether the system was enabled or disabled when the engine was switched off.
04
play screen with its menu system, search
and locate Settings Car settings
Driver support systems City Safety.
Select the Off option. For more information
on the menu system MY CAR, see
page 203.
NOTE
When City Safety™ brakes, the brake lights
come on.
Operation
NOTE
The City Safety™ function is always enabled after the engine has been started via
key position I and II (see page 79 on key
positions).
On and Off
In certain situations, it may advisable to disable
City Safety™, e.g. where leafy branches could
sweep over the bonnet and/or windscreen.
After starting the engine City Safety™ can be
deactivated as follows:
162
WARNING
The laser sensor emits laser light even when
City Safety™ is disabled manually.
To enable City Safety™ again:
• Follow the same procedure as for disabling, but select the On option.
Limitations
The sensor in City Safety™ is designed to
detect cars and other large vehicles in front of
the car irrespective of whether it is day or night.
The sensor has limitations. It does not work as
well – or does not work at all – in e.g. heavy
snowfall or rain, dense fog, dust storms or blizzards. Mist, dirt, ice or snow on the windscreen
may disrupt the function.
Low-hanging objects, e.g. a flag/pennant for
projecting load, or accessories such as auxiliary lamps and bull bars that are higher than the
bonnet limit the function.
The laser light from the sensor in City
Safety™ measures how the light is reflected.
The sensor cannot detect objects with low
reflection capacity. The rear sections of the
vehicle generally reflect the light sufficiently
thanks to the number plate and rear light reflectors.
On slippery road surfaces the braking distance
is extended, which may reduce the capacity of
City Safety™ to avoid a collision. In such situations the ABS and DSTC systems will provide best possible braking force with maintained stability.
When your own car is reversing, City Safety™
is temporarily deactivated.
City Safety™ is not activated at low speeds under 4 km/h, which is why the system does
not intervene in situations where a vehicle in
front is being approached very slowly, e.g.
when parking.
Driver commands are always prioritised, which
is why City Safety™ does not intervene in situations where the driver is steering or accelerating in a clear manner, even if a collision is
unavoidable.
04 Driver support
City Safety™
When City Safety™ has prevented a collision
with a stationary object the car remains stationary for a maximum of 1.5 seconds. If the car
is braked for a vehicle in front that is moving,
then speed is reduced to the same speed as
that maintained by the vehicle in front.
On a car with manual gearbox the engine stops
when City Safety™ has stopped the car, unless
the driver manages to depress the clutch pedal
beforehand.
NOTE
•
Keep the windscreen surface in front of
the laser sensor free from ice, snow and
dirt (see the illustration for sensor location, page 161).
•
Do not affix or mount anything on the
windscreen in front of the laser sensor
•
Remove ice and snow from the bonnet
- snow and ice must not exceed a height
of 5 cm.
Fault tracing and action
If the message Windscreen Sensors
blocked is shown on the instrument panel dis-
The Windscreen Sensors blocked message
is not shown for all situations in which the laser
sensor is blocked. The driver must therefore be
diligent about keeping the windscreen and
area in front of the laser sensor clean.
The following table presents possible causes
for the message being shown, along with suggestions for appropriate action.
Cause
Action
The windscreen surface in front of the
laser sensor is dirty
or covered with ice
or snow.
Clean the windscreen surface in
front of the sensor
from dirt, ice and
snow.
The laser sensor
field of vision is
blocked.
Remove the blocking object.
IMPORTANT
If there are cracks, scratches or stone chips
in the windscreen in front of either of the
laser sensor's "windows" and they cover a
surface of approx. 0.5 x 3.0 mm (or larger),
then a workshop must be contacted for
repair or replacement of the windscreen
(see the illustration for sensor location, page
161) - an authorised Volvo workshop is recommended.
Failure to take action may result in reduced
performance for City Safety™.
04
To avoid the risk of reducing City Safety™
performance the following also applies:
•
Before replacing a windscreen, contact
an authorised Volvo workshop to verify
that the correct windscreen is ordered
and fitted. Using the wrong windscreen
may result in the City Safety function
failing to operate or operating incorrectly.
•
The same type or Volvo-approved
windscreen wipers must be fitted during
replacement.
play, it indicates that the laser sensor is
blocked and cannot detect vehicles in front of
the car. This means that City Safety™ is not
operational.
163
04 Driver support
City Safety™
Laser sensor
The City Safety™ function includes a sensor
which transmits laser light. Contact a qualified
workshop in the event of a fault or if the laser
sensor needs servicing - an authorised Volvo
workshop is recommended. It is absolutely
essential to follow the prescribed instructions
when handling the laser sensor.
The following two labels are affixed directly on
the laser sensor unit:
• IEC 60825-1:1993 + A2:2001. Complies
with FDA (U.S. Food Administration) standards for laser product design with the
exception of deviations in accordance with
"Laser Notice No. 50" from 26 July 2001.
Maximum pulse energy
2.64 ¦J
Maximum average output
45 mW
Divergence (horizontal x vertical)
beam with optical instruments - Class 1M
laser product.
The lower label in the figure describes the
physical data of the laser beam:
164
Never look into the laser sensor (which
emits spreading invisible laser radiation)
at a distance of 100 mm or closer with
magnifying optics such as a magnifying
glass, microscope, lens or similar optical instruments.
•
Testing, repair, removal, adjustment
and/or replacement of the laser sensor's spare parts must only be carried
out by a qualified workshop - we recommend an authorised Volvo workshop.
•
To avoid exposure to harmful radiation,
do not carry out any readjustments or
maintenance other than those specified
here.
•
The repairer must follow specially
drawn up workshop information for the
laser sensor.
•
Do not remove the laser sensor (this
includes removing the lenses). A
removed laser sensor does not fulfil
laser class 3B as per standard IEC
60825-1. Laser class 3B is not eye-safe
and therefore entails a risk of injury.
Radiation data for the laser sensor
Pulse duration
• Laser radiation - Do not look into the laser
•
The following table specifies the laser sensor's
physical data.
04
The upper label in the figure describes the laser
beam's classification:
WARNING
If any of these instructions are not followed
then there is a risk of eye injury!
33 ns
28° × 12°
04 Driver support
City Safety™
•
The laser sensor's connector must be
unplugged before removal from the
windscreen.
•
The laser sensor must be fitted onto the
windscreen before the sensor's connector is plugged in.
•
The laser sensor transmits laser light
when the remote control key is in position II and also with the engine switched
off (see page 79 on key positions).
Symbols and messages in the display
In conjunction with automatic braking by the
City Safety™ system, one or more symbols
may illuminate on the instrument panel and a
message may appear on its display.
A text message can be acknowledged by
briefly pressing the OK button on the direction
indicator stalk.
04
165
04 Driver support
City Safety™
SymbolA
Message
Meaning/Action
Auto braking by City Safety
City Safety™ is braking or has automatically braked.
Windscreen Sensors blocked
The laser sensor is temporarily non-operational because something is blocking it.
• Remove the object blocking the sensor and/or clean the windscreen in front of the sensor.
04
Read about the limitations of the laser sensor, see page 162.
City Safety Service required
City Safety™ is not operational.
• Visit a workshop if the message remains - an authorised Volvo workshop is recommended.
A
166
The symbols are schematic.
04 Driver support
Collision Warning with Auto Brake & Pedestrian Detection*
Function
General
Two system levels
"Collision Warning with Auto Brake & Pedestrian Detection" is an aid to assist the driver
when there is a risk of colliding with a pedestrian or vehicle in front that is stationary or
moving in the same direction.
Depending on how the car equipped, the Collision Warning with Auto Brake & Pedestrian
Detection function may appear in two variants:
Level 1 and Level 2.
Collision Warning with Auto Brake & Pedestrian
Detection is activated in situations where the
driver should have started braking earlier,
which is why it cannot help the driver in every
situation.
The driver is merely warned of occurring obstacles by means of visual and acoustic signals no automatic braking intervenes, the driver
must himself brake.
Level 2
Collision Warning with Auto Brake & Pedestrian
Detection is designed to be activated as late as
possible in order to avoid unnecessary intervention.
The driver is warned of occurring obstacles by
means of visual and acoustic signals - the car
is braked automatically if the driver himself
does not act within a reasonable time.
Collision Warning with Auto Brake & Pedestrian
Detection may prevent a collision or reduce the
collision speed.
Collision Warning with Auto Brake & Pedestrian
Detection must not be used as an excuse for
the driver to change his/her driving style. If the
driver solely relies on Collision Warning with
Auto Brake to do the braking, there will be a
collision sooner or later.
1
2
Level 1
04
Function overview1.
Audio-visual warning signal in the event of
a collision risk.
Radar sensor2
IMPORTANT
Maintenance of components included in
Collision Warning with Auto Brake & Pedestrian Detection must only be carried out in a
workshop - an authorised Volvo workshop
is recommended.
Camera sensor
Collision Warning with Auto Brake executes
three steps in the following order:
1. Collision warning
2. Brake support2
3. Auto Brake2
NOTE: The illustration is schematic - details may vary depending on car model.
With system Level 2 only.
* Option/accessory, for more information, see Introduction.
167
04 Driver support
Collision Warning with Auto Brake & Pedestrian Detection*
The collision warning system and City
Safety™ complement each other. For more
information on City Safety™, see page 161.
1 - Collision warning
The driver is first warned of a potentially imminent collision.
The collision warning system detects pedestrians, stationary vehicles as well as vehicles
driving in the same direction in front of the car.
04
3 - Auto Brake2
The automatic brake function is activated last.
If in this situation the driver has not yet started
to take evasive action and the risk of collision
is imminent then the automatic braking function is deployed - this takes place irrespective
of whether or not the driver brakes. Braking
then takes place with full brake force in order
to reduce collision speed, or with limited brake
force if it is sufficient to avoid a collision.
If there is a risk of collision with a pedestrian or
a vehicle, the driver's attention is attracted with
a flashing red warning signal (no. [1] in the figure on page 167) and an acoustic signal
2 - Brake support2
Warning only activated in the event of a high
risk for collision. This section "Function"
and the section "Limitations" inform about
limitations that the driver must be aware of
before using the Collision Warning system
with Auto Brake.
Warnings and brake interventions for
pedestrians are switched off at vehicle
speeds exceeding 80 km/h.
If the risk of collision has increased further after
the collision warning then the brake support is
activated.
Warnings and brake interventions for
pedestrians do not work in darkness and
tunnels - not even when streetlights are lit.
This means that the brake system is prepared
for fast braking by applying the brakes gently,
which may be experienced as a slight jerk.
The auto-brake function can prevent a collision or reduce collision speed. To ensure
full brake performance, the driver should
always depress the brake pedal - even when
the car auto-brakes.
If the brake pedal is depressed sufficiently
quickly then full brake function is implemented.
Brake support also reinforces the driver's braking if the system considers that the braking is
not sufficient to avoid a collision.
2
168
WARNING
The collision warning system does not
engage in all driving situations or traffic,
weather or road conditions. The collision
warning system does not react to vehicles
driving in another direction to the car or to
animals.
With system Level 2 only.
* Option/accessory, for more information, see Introduction.
Never wait for a collision warning. The driver
is always responsible that the correct distance and speed are maintained - even
when the collision warning system with
auto-brake is used.
04 Driver support
Collision Warning with Auto Brake & Pedestrian Detection*
Detection of pedestrians
• In order for a pedestrian to be detected he/
she must appear full-length and have a
height of at least 80 cm.
Settings are made from MY CAR via the centre
console display screen and menu system. For
information on how the menu system is used,
see page 203.
• The system cannot detect a pedestrian
carrying larger items.
• The camera sensor's ability to see pedestrians at dusk and dawn is limited - just like
the human eye.
• The camera sensor's capacity to detect
pedestrians is deactivated when driving in
darkness and tunnels - even when streetlights are lit.
Optimal examples of what the system regards as
pedestrians with clear body contours.
Optimal performance of the system requires
that the system function that detects pedestrians receives as unambiguous information as
possible about the contours of the body - this
implies the opportunity to identify the head,
arms, shoulders, legs, upper and lower body
combined with a normal human pattern of
movement.
If large parts of the body are not visible to the
camera then the system cannot detect a
pedestrian.
Operation
Warning signals On and Off
It is possible to choose whether the collision
warning system's acoustic and visual warning
systems should be on or off.
When starting the engine, the setting that was
selected when the engine was switched off is
obtained automatically.
04
WARNING
Collision Warning with Auto Brake & Pedestrian Detection is an assistance tool.
This function cannot detect all pedestrians
in all situations and it cannot see e.g. partially obscured pedestrians, people in clothing that hides the contours of the body or
pedestrians shorter than 80 cm.
•
The driver is always responsible that the
vehicle is driven properly and with a
safety distance adapted to the speed.
NOTE
The Brake Support and Auto Brake functions are always activated - they cannot be
deactivated.
Light and acoustic signal
To switch off both the light and the acoustic
signal:
• Go to Settings
Car settings Driver
support systems Collision Warning.
Once there, remove the mark from the box.
The warning lamp (no. [1] in the figure on page
167) is tested each time the engine is started
by briefly illuminating the separate light points
of the warning lamp if the light and acoustic
* Option/accessory, for more information, see Introduction.
169
04 Driver support
Collision Warning with Auto Brake & Pedestrian Detection*
warnings for the collision warning system are
active.
Acoustic signal
The warning sound can be activated/deactivated separately:
• Select On or Off in the menu system under
Settings Car settings Driver
support systems Collision Warning
Warning sound.
04
Set warning distance
The warning distance regulates the distance at
which the visual and acoustic warnings are
deployed.
•
Select Long, Normal or Short in the menu
system MY CAR under Settings Car
settings Driver support systems
Collision Warning Warning distance
The warning distance determines the system's
sensitivity. Warning distance Long provides an
earlier warning. First test with Long and if this
setting produces too many warnings, which
could be perceived as irritating in certain situations, then change to warning distance
Normal.
Only use warning distance Short in exceptional cases, e.g. for dynamic driving.
170
NOTE
When the adaptive cruise control is in use
the warning lamp and warning sound will be
used by the cruise control even if the collision warning system is switched off.
The collision warning system warns the
driver in the event of a risk of a collision, but
the function cannot shorten driver reaction
time.
Checking settings
The settings required can be controlled on the
centre console display screen. Search with the
menu system MY CAR under Settings Car
settings Driver support systems
Collision Warning, see page 203.
Maintenance
In order for the collision warning system to
be effective, always drive with the Distance
Alert set at time interval 4–5, see page 158.
NOTE
Even if the warning distance has been set to
Long warnings could be perceived as being
late in certain situations, e.g. when there are
large differences in speed or if vehicles in
front brake heavily.
Camera and radar sensor.
WARNING
No automatic system can guarantee
100 % correct function in all situations.
Therefore, never test Collision Warning with
Auto Brake by driving at people or vehicles
- this may cause severe damage and injury
and risk lives.
* Option/accessory, for more information, see Introduction.
For the sensors to work correctly, they must be
kept clear of dirt, ice and snow, and be cleaned
regularly with water and car shampoo.
NOTE
Dirt, ice and snow covering the sensors will
reduce their function and may prevent
measurement.
04 Driver support
Collision Warning with Auto Brake & Pedestrian Detection*
Limitations
Collision Warning with Auto Brake and Pedestrian Detection is active from approx. 4 km/h.
The visual warning signal (no. [1] in the illustration on page 167) may be difficult to notice in
the event of strong sunlight, reflections, when
sunglasses are being worn or if the driver is not
looking straight ahead. The warning sound
should therefore always be activated.
On slippery road surfaces the braking distance
is extended, which may reduce the capacity to
avoid a collision. In such situations the ABS
and DSTC systems will provide best possible
braking force with maintained stability.
NOTE
The visual warning signal can be temporarily
disengaged in the event of high passenger
compartment temperature caused by
strong sunlight for example. If this occurs
then the warning sound is activated even if
it is deactivated in the menu system.
•
Warnings may not appear if the distance to the vehicle in front is small or if
steering wheel and pedal movements
are large, e.g. a very active driving style.
WARNING
Warnings and brake interventions could be
implemented late or not at all if the traffic
situation or external influences mean that
the radar or camera sensor cannot detect a
pedestrian or a vehicle in front correctly.
The sensor system has a limited range for
pedestrians and the system therefore provides effective warnings and brake interventions at vehicle speeds up to 50 km/h.
For stationary or slow-moving vehicles,
warnings and brake interventions are effective at vehicle speeds up to 70 km/h.
Warnings for stationary or slow-moving
vehicles could be disengaged due to darkness or poor visibility.
Warnings and brake interventions for
pedestrians are switched off at vehicle
speeds exceeding 80 km/h.
The collision warning system uses the same
radar sensors as adaptive cruise control. For
more information on the radar sensor and its
limitations, see page 154.
If warnings are perceived as being too frequent
or disturbing then the warning distance can be
reduced. This then leads to the system providing a warning at a later stage, which reduces
the total number of warnings; see the section
"Set warning distance" on page 170.
Collision Warning with Auto Brake is temporarily deactivated with reverse gear engaged.
Collision Warning with Auto Brake is not activated at low speeds - under 4 km/h, which is
why the system does not intervene in situations
where the car is approaching a vehicle in front
very slowly, e.g. when parking.
In situations where the driver demonstrates
active, aware driving behaviour, a collision
warning may be postponed slightly in order to
keep unnecessary warnings to a minimum.
04
When Auto Brake has prevented a collision
with a stationary object the car remains stationary for a maximum of 1.5 seconds. If the car
is braked for a vehicle in front that is moving,
then speed is reduced to the same speed as
that maintained by the vehicle in front.
On a car with manual gearbox the engine stops
when Auto Brake has stopped the car, unless
the driver manages to depress the clutch pedal
beforehand.
Camera sensor limitations
The car’s camera sensor is also used - as well
as by Collision Warning with Auto Brake - by
the functions:
• Automatic main/dipped beam dimming see page 89
• Road sign information - see page 141.
* Option/accessory, for more information, see Introduction.
171
04 Driver support
Collision Warning with Auto Brake & Pedestrian Detection*
• Driver Alert Control – see page 176
• Lane Keeping Aid - see page 180
NOTE
Keep the windscreen surface in front of the
camera sensor free from ice, snow, mist and
dirt.
04
Do not stick or attach anything to the windscreen in front of the camera sensor as this
may reduce effectiveness or cause one or
more of the systems dependent on the camera to stop working.
The camera sensors have limitations similar to
the human eye, i. e. they "see" worse in darkness, heavy snowfall or rain and in thick fog for
example. Under such conditions the functions
of camera-dependent systems could be significantly reduced or temporarily disengaged.
Strong oncoming light, reflections in the carriageway, snow or ice on the road surface, dirty
road surfaces or unclear lane markings could
also significantly reduce camera sensor function when it is used to scan the carriageway
and detect pedestrians and other vehicles.
172
The field of vision of the camera sensor is limited, which is why pedestrians and vehicles
cannot be detected in some situations, or they
are detected later than anticipated.
During very high temperatures the camera is
temporarily switched off for about 15 minutes
after the engine is started in order to protect
camera functionality.
Fault tracing and action
If the display shows the message Windscreen
Sensors blocked then this means that the
camera sensor is blocked and cannot detect
pedestrians, vehicles or road markings in front
of the car.
At the same time, this means that - besides
Collision Warning with Auto Brake - the Automatic main/dipped beam dimming, Road sign
information, Driver Alert Control and Lane
Keeping Aid functions will not have full functionality either.
The following table presents possible causes
for a message being shown along with the
appropriate action.
* Option/accessory, for more information, see Introduction.
Cause
Action
The windscreen surface in front of the
camera is dirty or
covered with ice or
snow.
Clean the windscreen surface in
front of the camera
from dirt, ice and
snow.
Thick fog, heavy rain
or snow means that
the camera does not
work sufficiently
well.
No action. At times
the camera does not
work during heavy
rain or snowfall.
The windscreen surface in front of the
camera has been
cleaned but the
message remains.
Wait. It may take
several minutes for
the camera to measure the visibility.
Dirt has appeared
between the inside
of the windscreen
and the camera.
Visit a workshop to
have the windscreen
inside the camera
cover cleaned - an
authorised Volvo
workshop is recommended.
04 Driver support
Collision Warning with Auto Brake & Pedestrian Detection*
Symbols and messages in the display
SymbolA
Message
Specification
Collis'n warning OFF
Collision warning system switched off.
Shown when the engine is started.
The message clears after about 5 seconds or after one press of the OK button.
Collision warn. Unavailable
The collision warning system cannot be activated.
Shown when the driver attempts to activate the function.
The message clears after about 5 seconds or after one press of the OK button.
Auto braking was activated
04
Auto Brake has been active.
The message clears after one press of the OK button.
Windscreen Sensors blocked
The camera sensor is temporarily disengaged.
Shown in the event of snow, ice or dirt on the windscreen for example.
• Clean the windscreen surface in front of the camera sensor.
Read about the limitations of the camera sensor, see page 171.
``
* Option/accessory, for more information, see Introduction.
173
04 Driver support
Collision Warning with Auto Brake & Pedestrian Detection*
SymbolA
Message
Specification
Radar blocked See manual
Collision Warning with Auto Brake is temporarily disengaged.
The radar sensor is blocked and cannot detect other vehicles. For example, in the event of
heavy rain or if slush has collected in front of the radar sensor.
Read about the limitations of the radar sensor, see page 154.
Collision warn. Service required
Collision Warning with Auto Brake is fully or partially disengaged.
• Visit a workshop if the message remains - an authorised Volvo workshop is recommended.
04
A
174
The symbols are schematic.
* Option/accessory, for more information, see Introduction.
04 Driver support
Driver Alert System*
General information on Driver Alert
System
Driver aid status
The Driver Alert System is intended to assist
drivers whose driving ability is deteriorating or
who are inadvertently leaving the lane they are
driving on.
The Driver Alert System consists of different
functions which can either be switched on at
the same time or individually:
• Driver Alert Control – DAC, see page 176.
• Lane Keeping Aid - LKA, see page 180.
A switched-on function is set in standby mode
and is not activated automatically until speed
exceeds 65 km/h.
04
The current status for all driver aids can be
checked in MY CAR, see page 205.
The function is deactivated again when speed
decreases to below 60 km/h.
The functions use a camera which is dependent on the lane having side markings painted
on each side.
WARNING
Driver Alert System does not work in all situations but is designed merely as a supplementary aid.
The driver always bears ultimate responsibility for ensuring that the vehicle is driven
safely.
* Option/accessory, for more information, see Introduction.
175
04 Driver support
Driver Alert System - DAC*
General information on DAC
The objective for DAC is to detect slowly deteriorating driving ability and it is primarily
intended for major roads. The function is not
intended for city traffic.
Operation
In some cases driving ability is not affected
despite driver fatigue. In which case there may
not be any warning issued for the driver. For
this reason it is always important to stop and
take a break in the event of any signs of driver
fatigue, irrespective of whether or not DAC
issues a warning.
04
NOTE
The DAC (Driver Alert Control) function is
intended to attract the driver's attention when
he/she starts to drive less consistently, e.g. if
he/she becomes distracted or starts to fall
asleep.
A camera detects the side markings painted on
the carriageway and compares the section of
the road with the driver's steering wheel movements. The driver is alerted if the vehicle does
not follow the carriageway evenly.
NOTE
The function must not be used to extend a
period of driving. Always plan breaks at regular intervals, and make sure you are well
rested.
Limitation
In some cases the system may issue a warning
despite driving ability not deteriorating, for
example:
• in strong side winds.
• on rutted road surfaces.
The camera sensor has certain limitations see page 171.
176
* Option/accessory, for more information, see Introduction.
Settings are made from the centre console display screen and its menu system. For information on how the menu system is used, see
page 203.
On/Off
To set Driver Alert in standby mode:
• In MY CAR, search for Car settings
Driver support systems Driver Alert
and check the box - No check in the box:
Function disengaged.
Function
Driver Alert is activated when speed exceeds
65 km/h and remains active as long as the
speed is over 60 km/h.
04 Driver support
Driver Alert System - DAC*
If the vehicle is being driven erratically, the driver is notified with an
audible signal plus the text message
Driver Alert Time for a break - the
linked symbol is lit on the instrument panel at
the same time. The warning is repeated after a
time if driving ability does not improve.
The warning symbol can go off:
• Press the left stalk switch OK button.
WARNING
An alarm should be taken very seriously, as
a sleepy driver is often not aware of his/her
own condition.
In the event of an alarm or a feeling of tiredness; stop the car in a safe manner as soon
as possible and rest.
Studies have shown that it is equally as dangerous to drive while tired as it is under the
influence of alcohol.
04
* Option/accessory, for more information, see Introduction.
177
04 Driver support
Driver Alert System - DAC*
Symbols and messages
Instrument panel
SymbolA
Message
Specification
Driver Alert Time for a break
The vehicle has been driven inconsistently - the driver is alerted by an acoustic warning signal
+ text.
Windscreen Sensors blocked
The camera sensor is temporarily disengaged.
Shown in the event of snow, ice or dirt on the windscreen for example.
04
• Clean the windscreen surface in front of the camera sensor.
Read about the limitations of the camera sensor, see page 171.
Driver Alert Sys Service required
The system is disengaged.
• Visit a workshop if the message remains - an authorised Volvo workshop is recommended.
A
The symbols are schematic.
Display
SymbolA
178
Message
Specification
Driver Alert OFF
The function is disengaged.
Driver Alert Available
The function is activated.
* Option/accessory, for more information, see Introduction.
04 Driver support
Driver Alert System - DAC*
SymbolA
A
Message
Specification
Driver Alert Standby <65 km/h
The function is set in standby mode due to speed being lower than 65 km/h.
Driver Alert Unavailable
The carriageway does not have clear side markings or the camera sensor is temporarily disengaged. Read about the limitations of the camera sensor, see page 171.
The symbols are schematic.
04
* Option/accessory, for more information, see Introduction.
179
04 Driver support
Driver Alert System - Lane Keeping Aid*
General information on the Lane
Keeping Aid
WARNING
LKA is merely a driver's aid and does not
engage in all driving situations or traffic,
weather or road conditions.
The driver always bears ultimate responsibility for ensuring that the vehicle is driven
safely and that applicable laws and road
traffic regulations are followed.
Function
04
The Lane Keeping Aid function (Lane Keeping
Aid) is intended for use on motorways and similar major roads to reduce the risk of the vehicle
accidentally leaving its own lane in certain situations.
The Lane Keeping Aid is active within the
speed interval 65-200 km/h on roads with
clearly visible side lines. The function is temporarily deactivated on narrow roads with less
than 2.6 metres between the lane side lines.
A camera reads the painted side lines of the
road/lane. If the car is about to cross a side line,
the Lane Keeping Aid actively steers the car
back into the lane with slight steering torque in
the steering wheel.
If the car reaches or passes a side line, the
Lane Keeping Aid warns the driver with pulsing
vibrations in the steering wheel.
180
* Option/accessory, for more information, see Introduction.
Off & On
Press the button in the centre console to activate or deactivate the function. The function is
switched on if one lamp is illuminated in the
button.
Some combinations of the selected equipment
leave no vacant space for an On/Off button in
the centre console - in which case the function
is handled instead by the car's menu system
MY CAR. Here, proceed as follows:
• Select On or Off under Settings
settings
Car
Lane Keeping Aid.
For a description of the menu system - see
page 203.
In addition, the following selections can be
made in MY CAR:
• Warning with vibration in the steering
wheel: Vibration only - On or Off.
• Active steering: Steering assist only On or Off.
•
Both Warning with vibration in the steering
wheel and Active steering: Full function On or Off.
Active steering
The Lane Keeping Aid strives to keep the car
within the side lines for the lane.
04 Driver support
Driver Alert System - Lane Keeping Aid*
Warning with vibration in the steering
wheel
Dynamic cornering
04
LKA intervenes and steers away.
If the vehicle approaches the left or right side
line of the lane and the direction indicator is not
activated, the car is steered back into the lane.
LKA does not engage in sharp inside curves.
LKA steers and warns with pulsing steering wheel
vibrations1.
If the vehicle passes a side line, the Lane Keeping Aid warns the driver with pulsing vibrations
in the steering wheel. This occurs regardless of
whether the car is actively steered back by
applying a slight steering torque.
1
In certain cases, the Lane Keeping Aid allows
the car to cross side lines without engaging
active steering or warning with pulsing vibrations in the steering wheel. Using an adjacent
lane for dynamic cornering when there is a
clear line of vision is an example of one such
case.
The figure shows 3 pulsing vibrations when the side line is passed.
``
* Option/accessory, for more information, see Introduction.
181
04 Driver support
Driver Alert System - Lane Keeping Aid*
Operation
Limitations
The function is supplemented with self-explanatory graphics in different situations. Here are
some examples:
• The Lane Keeping Aid camera sensor is
restricted in a similar way to the human
eye. For more information, see page 171.
NOTE
NOTE
In certain demanding situations LKA may
find it difficult to assist the driver correctly in which case it is recommended that LKA
is switched off.
LKA is temporarily deactivated for as long
as the direction indicator is switched on.
04
Examples of such a situation could be:
LKA engages on the right side.
The Lane Keeping Aid intervenes and steers
away from the side line - this is indicated with:
•
RED line for the side in question.
•
•
•
•
•
roadworks
winter road conditions
poor road surface
very sporty driving style
poor weather with reduced visibility.
Hands on the steering wheel
LKA "sees" the following side lines.
If the Lane Keeping Aid is active and
detects/"sees" the side lines, the LKA symbol
is shown with WHITE lines.
• GREY side line – the Lane Keeping Aid
does not see a line on that side of the car.
182
* Option/accessory, for more information, see Introduction.
In order for Lane Keeping Aid to operate, the
driver must have his/her hands on the steering
wheel. LKA continual monitors this. If hands
are not detected on the steering wheel, a text
message encouraging the driver to actively
steer the car is shown.
If the driver does not follow the request to begin
steering, the Lane Keeping Aid goes into
standby mode and will remain in this mode until
the driver begins to steer the car again.
04 Driver support
Driver Alert System - Lane Keeping Aid*
Symbols and messages
In situations where the LKA function is not
working or is set to standby mode, a message
may be displayed in the instrument panel along
with an explanatory message on the display or
TV screen. If so, follow the given recommendation.
Message examples:
SymbolA
Message
Specification
Lane Keeping Aid Unavailable at this speed
The Lane Keeping Aid is set to standby mode because the speed is lower than 65 km/h.
Lane Keeping Aid Unavailable for current markings
The lane does not have clear side lines or the camera sensor is temporarily disengaged. Read about
the limitations of the camera sensor, see page 171.
Lane Keeping Aid Available
The function scans the lane's side lines.
Windscreen Sensors
blocked
The camera sensor is temporarily disengaged.
04
Shown in the event of snow, ice or dirt on the windscreen for example.
• Clean the windscreen surface in front of the camera sensor.
Read about the limitations of the camera sensor, see page 171.
A
Lane Keeping Aid Service
required
The system is disengaged.
Lane Keeping Aid Interrupted
LKA has been set to standby mode. The lines of the LKA symbol indicate when the function is active
again.
• Visit a workshop if the message remains - an authorised Volvo workshop is recommended.
The table symbols are schematic. The symbols on the display may have a slightly different appearance.
* Option/accessory, for more information, see Introduction.
183
04 Driver support
Park assist syst*
General
Parking assistance is used as an aid to parking.
An acoustic signal as well as symbols on the
centre console's display screen indicate the
distance to the detected obstacle.
Parking assistance sound level can be
adjusted during the ongoing acoustic signal
using the centre console's VOL knob or in the
car's menu system MY CAR - see page 203.
04
WARNING
•
Parking assistance does not relinquish
the driver's own responsibility during
parking.
•
The sensors have blind spots where
obstacles cannot be detected.
•
Be aware of e.g. people and animals
near the car.
Parking assistance is available in two variants:
• Rear only
• Both front and rear.
Function
Display screen view - showing an obstacle left
front and right rear.
NOTE
When a towbar is configured with the car's
electrical system, the protrusion of the towbar is included when the function measures
the parking space.
The centre console's display screen shows an
overview of the relationship between the car
and detected obstacle.
On/Off for the sensors for parking assistance and
CTA1.
The system is automatically activated when the
engine is started - the switch's On/Off lamp is
1
184
illuminated. If parking assistance is switched
off with the button, the lamp goes out.
Side warning, see page 196
* Option/accessory, for more information, see Introduction.
Marked sectors show which of the four sensor(s) detected an obstacle. The closer to the
car symbol a selected sector box is, the shorter
the distance between the car and a detected
obstacle.
The frequency of the signal increases the
shorter the distance to an obstacle, in front of
or behind the car. Other sound from the audio
system is muted automatically.
04 Driver support
Park assist syst*
When the distance is within 30 cm the tone is
constant and the active sensor's field nearest
the car is filled in. If the detected obstacle is
within the distance for the constant tone both
behind and in front of the car, then the tone
sounds alternately from the loudspeakers.
Rear parking assistance
Front parking assistance
IMPORTANT
Certain objects e.g. chains, thin glossy
poles or low barriers may be in the "signal
shadow" and are then temporarily not
detected by the sensors - the pulsating tone
may then unexpectedly stop instead of
changing over to the expected constant
tone.
•
In which case, pay extra attention and
manoeuvre/reposition the car particularly slowly or stop the current parking
manoeuvre - there may be a high risk of
damage to vehicles or other objects
since the sensors are unable to function
optimally.
04
The distance covered to the rear of the car is
about 1.5 metres. The acoustic signal for
obstacles behind comes from one of the rear
loudspeakers.
The distance covered in front of the car is about
0.8 metres. The acoustic signal for obstacles in
front comes from one of the front loudspeakers.
Rear parking assistance is activated when
reverse gear is engaged.
Front park assist is active up to
approx. 10 km/h. The lamp in the button is illuminated in order to indicate that the system is
activated. When the speed is below 10 km/h
the system is reactivated.
The system is automatically deactivated when
reversing with e.g. a trailer or bike carrier on the
towbar in order to prevent the sensors from
reacting to them.
NOTE
When reversing with e.g. trailer or bike carrier on the towbar - without Volvo genuine
trailer cable - Park Assist may need to be
deactivated manually in order that the sensors do not react to the trailer or bike carrier.
IMPORTANT
When auxiliary lamps are fitted: Remember
that these must not obscure the sensors the auxiliary lamps may then be perceived
as an obstacle.
* Option/accessory, for more information, see Introduction.
185
04 Driver support
Park assist syst*
Fault indicator
Cleaning the sensors
If the information symbol illuminates
with constant glow and the information display shows Park assist syst Service
required then parking assistance is disengaged.
IMPORTANT
04
Under some circumstances, the parking
sensors can give false warning signals due
to external sound sources which emit the
same ultrasound frequencies as those with
which the system works.
Examples of such sources include horns,
wet tyres on asphalt, pneumatic brakes and
exhaust noises from motorcycles etc.
Sensor location, front.
Sensor location, rear.
The sensors must be cleaned regularly to
ensure that they work properly. Clean them
with water and car shampoo.
186
NOTE
Dirt, ice and snow covering the sensors will
reduce their function and may prevent
measurement.
* Option/accessory, for more information, see Introduction.
04 Driver support
Park assist camera*
General
Function and operation
When reverse gear is engaged two unbroken
lines are shown graphically which illustrate
where the car's rear wheels will roll with the
current steering wheel angle, this facilitates
tight parking, reversing into tight spaces and
for hitching a trailer. The car’s approximate
external dimensions are illustrated by means of
two dashed lines. These help lines can be
switched off in the settings menu.
The parking camera is an assist system and is
activated when reverse gear is engaged (can
be changed in the settings menu, see
page 203).
The camera image is shown on the centre console's screen.
WARNING
•
The parking camera is an aid and can
never replace the responsibilities of the
driver when reversing.
•
The camera has blind spots where
obstacles cannot be detected.
•
Be aware of people and animals near
the car.
If the car is also equipped with parking assistance sensors* then their information is displayed graphically as coloured fields in order to
illustrate the distance to detected obstacles,
see page 184.
CAM button location.
The camera shows what is behind the car and
if something appears from the sides.
The camera shows a wide area behind the car
and part of the bumper and any towbar.
04
The camera is active approx. 5 seconds after
reverse gear has been disengaged or until the
car's speed exceeds 10 km/h.
Objects on the screen may appear to tilt slightly
- this is normal.
NOTE
Objects on the display screen may be closer
to the car than they appear to be on the
screen.
If another view is active the parking camera
system takes over automatically and the camera image is displayed on the screen.
Camera location next to the opening handle.
* Option/accessory, for more information, see Introduction.
187
04 Driver support
Park assist camera*
Light conditions
The camera image is adjusted automatically
according to prevailing light conditions.
Because of this, the image may vary slightly in
brightness and quality. Poor light conditions
can result in a slightly reduced image quality.
which shows the driver the path the car will
take when it turns.
NOTE
•
When reversing with a trailer which is
not connected electrically to the car, the
lines on the display show the route the
car will take - not the trailer.
•
The screen shows no lines when a trailer
is connected electrically to the car's
electrical system.
•
The parking camera is deactivated
automatically when towing a trailer if a
Volvo genuine trailer cable is used.
NOTE
04
Keep the camera lens clear of dirt, snow and
ice to ensure optimum function. This is particularly important in poor light.
Park assist lines
IMPORTANT
Remember that the display only shows the
area behind the car - so pay attention to the
sides and front of the car when turning the
steering while reversing.
Examples of how the park assist lines can be displayed for the driver.
The lines on the screen are projected as if they
were at ground level behind the car and are
directly related to steering wheel movement,
188
Boundary lines
* Option/accessory, for more information, see Introduction.
Different lines in the system.
Boundary line, free reversing zone
"Wheel tracks"
The dashed line (1) frames in a zone up to
about 1.5 m back from the bumper. It is also
the limit of the car's most protruding parts,
such as door mirrors and corners - also during
turning.
The wide "wheel tracks" (2) between the side
lines indicate where the wheels will roll and can
extend about 3.2 m back from the bumper if no
obstacle is in the way.
04 Driver support
Park assist camera*
Cars with reversing sensors*
Colour / paint
Distance
(metres)
Orange
0,3–0,5
Red
0–0.3
The towbar's park assist line is activated in the
menu system MY CAR where a selection can
be made between displaying the "wheel
tracks" or towbar course - both options cannot
be displayed simultaneously.
Limitations
Settings
Press OK/MENU when a camera view is
shown. Make the settings as desired.
NOTE
Miscellaneous
• The default setting is that the camera is
Coloured areas (x 4 - one per sensor) show distance.
If the car is also equipped with parking assistance sensors (see page 184) the distance indication will be more precise and the coloured
areas show which of the 4 sensors is/are registering an obstacle.
The colour of the areas changes with decreasing distance to the obstacle - from light yellow
to yellow to orange to red.
Bicycle racks or other accessories mounted
on the back of the car may obscure the line
of sight of the camera.
04
activated when reverse gear is engaged.
• One press on CAM activates the camera
even if reverse gear is not engaged.
• Change between normal and zoomed
image by turning TUNE or by pressing
CAM.
• If the car has more cameras* installed then
the camera in use is changed by turning
TUNE.
Towbar
Pay attention to the possibility that, even if it
only looks like a relatively small part of the
image is obscured, it could be a relatively large
sector that is hidden from view. Obstacles
could thereby go undetected until they are very
close to the car.
To bear in mind
• Keep the camera lens free from dirt, ice
and snow.
Colour / paint
Distance
(metres)
Light yellow
0.7–1.5
The camera can be used to advantage when
hitching a trailer. A help line for the towbar's
intended "course" towards the trailer can be
shown in the display - just as for the "wheel
tracks".
Yellow
0,5–0,7
• The towbar can be zoomed in for precision
• Clean the camera lens regularly with lukewarm water and car shampoo - take care
not to scratch the lens.
manoeuvring with one press on CAM.
Pressing again gives normal view.
* Option/accessory, for more information, see Introduction.
189
04 Driver support
Park Assist Pilot - PAP*
General
WARNING
PAP does not work in all situations but is
designed merely as a supplementary aid.
The driver always has the final responsibility
for driving the vehicle in a safe manner and
for paying attention to the surroundings and
other road users approaching or passing
during parking.
Function
04
The On/Off button is on the centre console.
The Park Assist Pilot (PAP – Park Assist Pilot)
helps the driver to park by first checking
whether a space is sufficiently large and then
turning the steering wheel and steering the car
into the space. Symbols, graphics and text in
the combined instrument panel display show
when various things are to be done.
NOTE
When a towbar is configured with the car's
electrical system, the protrusion of the towbar is included when the function measures
the parking space.
190
The PAP function turns the steering wheel - the
driver's job is to select a gear, control the
speed and brake.
PAP can be activated if the following criteria
are met once the engine has been started:
• The functions DSTC or ABS must not interfere while the PAP function is enabled these can be activated due to a steep or
slippery surface, for example: see pages
129 and 138 for more information.
• Trailers must not be connected to the car.
• The speed must be below 50 km/h.
* Option/accessory, for more information, see Introduction.
Principle for PAP.
The PAP function parks the car using the following steps:
1. The function searches for a parking space
and measures it (A & B). During measurement, speed must not exceed 30 km/h.
2. The car is steered into the space while
reversing (C & D).
3. The car is straightened up in the space by
driving back and forth (E & F).
04 Driver support
Park Assist Pilot - PAP*
Operation
1. Activate PAP by pressing
this button and do not drive
faster than 30 km/h.
The driver is instructed by means of simple,
clear instructions on the instrument panel using both graphics and text.
2 - Reversing in
NOTE
Remember that certain steering wheel positions may obstruct the instrument panel's
instructions when you turn it during the
parking manoeuvre.
2. Keep an eye on the instrument panel display and be prepared to stop the car when
the graphics and text so request.
3. Stop the car when the graphics and text so
request.
1 - Searching and checking
measurements
NOTE
PAP searches the area for a parking space,
displays instructions and guides the car in
on its passenger side. But if required the car
can also be parked on the driver's side of
the street:
•
Activate the direction indicator for the
driver's side - the car is then parked on
that side of the street instead.
04
During the Reversing step, PAP will steer the
car into the parking space. Proceed as follows:
1. Check that the area behind the car is clear,
then engage reverse gear.
2. Reverse slowly and carefully without
touching the steering wheel - and no faster
than approx. 10 km/h.
3. Keep an eye on the instrument panel display and be prepared to stop the car when
the graphics and text so request.
The PAP function searches for a parking space
and checks whether it is big enough. Proceed
as follows:
* Option/accessory, for more information, see Introduction.
191
04 Driver support
Park Assist Pilot - PAP*
NOTE
•
04
Keep your hands away from the steering wheel when the PAP function is activated.
•
Make sure that the steering wheel is not
hindered in any way and can rotate
freely.
•
For optimum results - Wait until the
steering wheel has been turned before
starting to drive backwards/forwards.
3 - Straightening up
1. Engage first gear or D position, wait until
the steering wheel has been turned, then
drive slowly forwards.
2. Stop the car when the graphics and text
message so request.
3. Engage reverse gear and drive backwards
slowly until the graphics and text message
tell you to stop.
The function is disengaged automatically when
parking is complete, and the graphics and text
message show that parking is complete. It may
be necessary for the driver to correct the positioning. Only the driver can determine whether
the car is properly parked.
IMPORTANT
The warning distance is shorter when the
sensors are used by Active Park Assist
compared with when Park Assist uses the
sensors.
Limitations
The PAP sequence is stopped:
When the car has reversed into the parking
space, it must be straightened up and stopped.
• if the car is driven too quickly - more than
30 km/h
• if the driver touches the steering wheel
• if the ABS or DSTC function is enabled e.g. if a wheel loses grip on a slippery road.
• if a passenger door is opened - but the
driver's door may be opened.
A text message indicates where the PAP
sequence was stopped.
NOTE
Dirt, ice and snow covering the sensors will
reduce their function and may prevent
measurement.
IMPORTANT
Under certain circumstances, PAP is unable
to find parking spaces - one reason for this
may be the fact that there is interference
with the sensors from external sound
sources which emit the same ultrasound
frequencies as those with which the system
works.
Examples of such sources include horns,
wet tyres on asphalt, pneumatic brakes and
exhaust noises from motorcycles etc.
To bear in mind
The driver should bear in mind that the Park
Assist Pilot is an aid – not an infallible, fullyautomatic function. The driver must therefore
be prepared to intervene. There are also details
to bear in mind while parking, e.g.:
• PAP works based on the positioning of
parked vehicles. If these are not properly
192
* Option/accessory, for more information, see Introduction.
04 Driver support
Park Assist Pilot - PAP*
parked, the car could end up on the sidewalk or improperly parked in some other
way.
• PAP is designed for parking on straight
• Do not use PAP if loaded objects are protruding from the car.
Symbols and messages
The instrument panel display can show different combinations of symbols and text with
varying content - sometimes with a selfexplanatory piece of advice on appropriate
action.
Maintenance
streets, not sharp curves or bends.
• It is not always possible to find parking
spaces on narrow streets since there is not
enough space for manoeuvring. In such
parking situations, it helps the system to
drive as close to the side of the road as
possible where you intend to park.
If a message says that PAP is disengaged,
contact with an authorised Volvo workshop is
recommended.
04
• Bear in mind that the front of the car may
swing out towards oncoming traffic while
being parked.
• Objects situated higher than the detection
areas of the sensors are not included when
calculations are made for the parking
manoeuvre. This may cause PAP to swing
into the parking space too early.
• The driver is responsible for determine
whether the space selected by PAP is suitable for parking.
• Use approved tyres1 with the correct tyre
Besides the front and rear Park assist bumper sensors, PAP also uses a sensor on either side of the
front screen.
For the PAP function to work correctly, its sensors must be cleaned regularly with water and
car shampoo - these are the same sensors as
are used by parking assistance (see page 186)
plus one side sensor.
pressure as this affects PAP's ability to
park the car.
• Heavy rain or snow may cause the system
to measure the parking space incorrectly.
• Do not use PAP if snow chains or a spare
wheel are fitted.
1
"Approved tyres" refers to tyres of the same type and make as those mounted when the car was delivered from the factory.
* Option/accessory, for more information, see Introduction.
193
04 Driver support
BLIS and CTA*
General information on BLIS and CTA
Operation
The BLIS function (Blind Spot Information
System) is designed for driving in dense traffic
on roads with several lanes in the same direction. BLIS is a driver's aid intended to provide
a warning about:
Function
BLIS and CTA are activated when the engine is
started. This is confirmed by the indicator
lamps in the door panels flashing once.
Activate/deactivate BLIS
• vehicles in the car's blind spot
• quickly approaching vehicles in the left and
right lanes closest to the car.
04
The BLIS function CTA (Cross Traffic Alert) is a
driver's aid intended to provide a warning
about:
• crossing traffic when the car is reversed.
Position of the BLIS lamp1.
Indicator lamp
WARNING
BLIS and CTA are a supplement - not a
replacement for a safe driving style and the
use of rearview and door mirrors. The BLIS
and CTA functions can never replace driver
responsibility and attention.
It is always the responsibility of the driver to
change lanes and reverse in a safe way.
BLIS symbol
NOTE
The lamp illuminates on the side of the car
where the system has detected the vehicle.
If the car is overtaken on both sides at the
same time then both lamps illuminate.
Button for activating/deactivating.
The BLIS function can be deactivated/activated by pressing the BLIS button on the centre console.
Some combinations of the selected equipment
leave no vacant space for a button in the centre
console - in which case the function is handled
by the car's menu system MY CAR2:
• Select On or Off at Settings
settings
1
2
194
NOTE: The illustration is schematic - details may vary depending on car model.
For information on the menu system - see page 203.
* Option/accessory, for more information, see Introduction.
BLIS.
Car
04 Driver support
BLIS and CTA*
When BLIS is deactivated/activated the lamp
in the button goes out/illuminates and the
instrument panel display confirms the change
with a text message. The door panel indicator
lamps flash once upon activation.
To extinguish the message:
• Press the left stalk switch OK button.
or
• Wait approx. 5 seconds – the message
extinguishes.
The system is designed to react when:
• the vehicle is overtaken by other vehicles
• another vehicle is quickly approaching the
vehicle
When BLIS detects a vehicle in zone 1 or a
quickly approaching vehicle in zone 2, the door
panel BLIS lamp illuminates with a constant
glow. If the driver activates the direction indicator on the same side as the warning, the BLIS
lamp will change from a constant glow to flashing with a more intense light.
04
On/Off for parking assistance and CTA sensors.
When BLIS operates
WARNING
CTA itself can be deactivated in the MY CAR2
menu system as follows:
BLIS does not work in sharp bends.
BLIS does not work when the car is being
reversed.
• Go to Settings
Car settings BLIS
Cross Traffic Alert and deselect. The
CTA function is then deactivated. BLIS
remains activated.
Activate/deactivate CTA
In cars equipped with parking assistance (see
page 184), the CTA function can be deactivated/activated with the PAS button:
Principle for BLIS: 1. Zone in blind spot. 2. Zone
for quickly approaching vehicle.
The BLIS function is active at speeds above
approx. 10 km/h.
2
For information on the menu system - see page 203.
* Option/accessory, for more information, see Introduction.
195
04 Driver support
BLIS and CTA*
which direction the approaching object is
coming from.
When CTA operates
• CTA also warns by illuminating the BLIS
lamps.
The BLIS and CTA sensors are located inside
the rear wing/bumper on each side of the car.
• To ensure optimal functionality, the areas
in front of the sensors must be kept clean.
• An additional warning is provided in the
form of a lit icon in the TV screen's PAS
graphics.
WARNING
CTA does not work in all situations but is
designed merely as a supplementary aid.
04
Principle for CTA - .
CTA supplements the BLIS function by being
able to see crossing traffic from the side during
reversing, such as when reversing out of a
parking space.
The driver always bears ultimate responsibility for ensuring that the vehicle is driven
safely.
Maintenance
• Dirt, ice and snow covering sensors can
reduce functionality and make it impossible to provide warnings. BLIS and CTA are
unable to detect hazards if covered.
• Do not affix any objects, tape or labels in
IMPORTANT
Repair of the BLIS and CTA functions' components must only be performed by a workshop - an authorised Volvo workshop is recommended.
CTA is only active during reversing and is activated automatically when reverse is selected at
the gearbox.
• If CTA detects something approaching
196
trailer is connected to the car’s electrical
system.
the area of the sensors.
CTA is primarily designed to detect vehicles. In
favourable conditions, it may also be able to
detect smaller objects, such as cyclists and
pedestrians.
from the side, an acoustic warning signal
sounds. The signal comes from either the
left or the right speaker depending on
Limitations
• BLIS and CTA are deactivated when a
Location of BLIS and CTA sensors.
* Option/accessory, for more information, see Introduction.
04 Driver support
BLIS and CTA*
Messages on the display
In situations where the BLIS and CTA functions
fail or are interrupted, a symbol may be shown
on the instrument panel, supplemented by an
explanatory message. Follow any recommendation given.
Message examples:
Message
Specification
BLIS ON
The BLIS system is
activated.
BLIS and CTA
Service required
BLIS and CTA are
not working.
Message
Specification
BLIS OFF
BLIS and CTA have
been deactivated
manually.
CTA OFF
CTA has been deactivated manually.
BLIS is active.
A text message can be acknowledged by
briefly pressing the OK button on the direction
indicator stalk.
04
• Visit a workshop
if the message
remains - an
authorised
Volvo workshop
is recommended.
BLIS and CTA OFF
Trailer attached
BLIS and CTA are
temporarily disabled
because a trailer is
connected to the
car’s electrical system.
* Option/accessory, for more information, see Introduction.
197
Menus and messages...........................................................................
Menu source MY CAR..........................................................................
Climate control......................................................................................
Fuel-driven engine block heater and passenger compartment heater*
Additional heater*..................................................................................
Trip computer........................................................................................
Adapting driving characteristics...........................................................
Comfort inside the passenger compartment........................................
198
* Option/accessory, for more information, see Introduction.
200
203
212
223
227
229
233
234
COMFORT AND DRIVING PLEASURE
05 Comfort and driving pleasure
Menus and messages
Combined instrument panel1
page 79. If a message appears then this must
be acknowledged with OK for the menus to be
shown.
Oil level2
Preconditioning*
Trip computer reset
Menu overview
Some of the following menu options require the
function and hardware to be installed in the car.
Message
Analogue combined instrument panel
Digital speed
Parking heater*
Additional heater*
Information display (analogue combined instrument panel) and menu navigation controls.
05
OK - access the menu, acknowledge messages and confirm menu selections.
Thumbwheel – browse between menu
options.
RESET - reset data in the selected trip
computer step and go back in the menu
structure.
The menus shown on the information display
in the combined instrument panel are controlled with the left-hand stalk switch. The
menus shown depend on key position, see
1
2
3
200
TC options
Service status
Oil level2
Messages (##)3
Digital combined instrument panel
Settings*
Text message in the information display (analogue
combined instrument panel).
Themes
When a warning, information or indicator symbol illuminates, a corresponding message
appears on the information display. An error
message is stored in a memory list until the
fault has been rectified.
Contrast mode/Colour mode
Service status
Messages
See also page 69 for different variants of the combined instrument panel.
Certain engines.
The number of messages is indicated in brackets.
* Option/accessory, for more information, see Introduction.
05 Comfort and driving pleasure
Menus and messages
Press OK to acknowledge4 and browse among
the messages.
NOTE
If a warning message appears while you are
using the trip computer, the message must
be read (press OK) before the previous
activity can be resumed.
4
Message
Specification
Stop safelyA
Stop and switch off the
engine. Serious risk of
damage - consult a
workshopB.
Stop engineA
Stop and switch off the
engine. Serious risk of
damage - consult a
workshopB.
Service urgentA
Contact a workshopB to
check the car immediately.
Service
requiredA
Contact a workshopB to
check the car as soon
as possible.
Message
Specification
Message
Specification
See manualA
Read the owner's manual.
Book time for
maintenance
Time to book regular
service - contact a
workshopB.
Transmission
Reduced performance
The gearbox cannot
handle full capacity.
Drive carefully until the
message clearsC.
Time for regular
maintenance
Time for regular service
- contact a workshopB.
The timing is determined by the number of
kilometres driven, number of months since the
last service, engine running time and oil grade.
Maintenance
overdue
If the service intervals
are not followed then
the warranty does not
cover any damaged
parts - contact a workshopB.
Transmission
Oil change needed
Contact a workshopB to
check the car as soon
as possible.
If shown repeatedly contact a workshopB.
Transmission
hot Reduce
speed
Drive more smoothly or
stop the car in a safe
manner. Disengage the
gear and run the engine
at idling speed until the
message clearsC.
Transmission
hot Stop safely
Wait for cooling
Critical fault. Stop the
car immediately in a
safe manner and contact a workshopB.
05
A message can also be acknowledged via the thumbwheel or RESET button.
201
05 Comfort and driving pleasure
Menus and messages
A
B
C
05
202
Message
Specification
Temporarily
offA
A function has been
temporarily switched
off and is reset automatically while driving
or after starting again.
Low battery
charge Power
save mode
The audio system is
switched off to save
energy. Charge the battery.
Part of message, shown together with information on where
the problem has arisen.
An authorised Volvo workshop is recommended.
For more messages concerning automatic transmission, see
page 119.
05 Comfort and driving pleasure
Menu source MY CAR
General information on MY CAR
Many of the car's functions are handled
in this menu source, such as setting the
clock, door mirrors and locks.
Operation
Centre console controls
Navigation in the menus is carried out using
buttons on the centre console or with the steering wheel's right-hand keypad.
•
•
•
•
•
phone call is rejected
current function is interrupted
input characters are deleted
most recent selections are undone
leads up in the menu system.
Short and long presses can also produce varying results.
Certain functions are standard, others are
optional - the range also varies depending on
the market.
A long press leads to the highest menu level
(Parent view), from which all of the car's functions/menu sources can be accessed; see
page 243.
Centre console controls for menu navigation.
05
Press MY CAR to open the menus under
MY CAR.
Press OK MENU to select/tick in the highlighted menu option or to store the
selected function in the memory.
Turn the TUNE knob to scroll up/down
among the menu options.
EXIT
EXIT functions
Depending on the function the cursor is on
when EXIT is pressed, and on the menu level,
one of the following occurs:
``
203
05 Comfort and driving pleasure
Menu source MY CAR
Steering wheel keypad*
The following is an example of how a function
can be accessed and adjusted using the steering wheel keypad:
MY CAR
The following options are available in menu
source MY CAR:
1. Press the centre console button MY CAR.
2. Scroll to the desired menu, e.g. Settings,
with the thumbwheel (1) and then press the
thumbwheel - a submenu opens.
3. Scroll to the desired menu, e.g. Car
settings and press the thumbwheel - a
submenu opens.
The keypad may vary depending on the audio
level; see page 240.
05
Turn the thumbwheel knob to scroll up/
down among the menu options.
Press the thumbwheel to select/tick in the
highlighted menu option or to store the
selected function in the memory.
EXIT (see heading "EXIT functions" page
203).
Search paths
Current menu level is shown at the top right of
the centre console display screen. Search
paths to the menu system functions are described in this manual in the following form:
4. Scroll to Lock settings and press the
thumbwheel - a new submenu opens.
5. Scroll to Doors unlock and press the
thumbwheel - a submenu of selectable
functions opens.
6. Choose between the options All doors
and Driver door, then all and press the
thumbwheel - a cross is marked in the
option's empty box.
7. Exit the programming by backing out of the
menus incrementally with short presses on
EXIT (2) or with one long press.
The procedure is the same as with the centre
console's buttons - see page 203: OK MENU
(2), EXIT (4) and the TUNE knob (3).
Settings Car settings Lock settings
Doors unlock Driver door, then all.
204
* Option/accessory, for more information, see Introduction.
•
•
•
•
•
My V40
Trip statistics
DRIVe*
Support systems
Settings
05 Comfort and driving pleasure
Menu source MY CAR
My V40
Shown here are the 4 first menu levels under
MY CAR Settings. Some menus have further submenus - these are then described in
detail in their respective sections.
Driver support system
When selecting whether a function should be
activated/On or deactivated/Off a square is
displayed:
On: Selected square.
Off: Empty square.
• Select On/Off with OK - then back out of
the menu with EXIT.
MY CAR
My V40
MY CAR
Car settings
Support systems
The display screen shows a grouping of all of
the car's driver support systems - these can be
activated or deactivated here.
The display screen shows a summary of the
current status of the car's driver support systems.
My DRIVe*
Setup - menus
Parts of Volvo's DRIVe concept are described
here, amongst other things.
The menus are structured as follows:
• Start/Stop
• Eco driving guide
For more information - see page 123.
05
Car key memory
On
p. 82
and
104
Off
Menu level 1
p. ....
Menu level 2
Menu level 3
Menu level 4
``
* Option/accessory, for more information, see Introduction.
205
05 Comfort and driving pleasure
Menu source MY CAR
Lock settings
Automatic door locking
p. 44,
52 and
55
Tilt left mirror
Off
Tilt right mirror
90 sec
Home safe light duration
Doors on same
side
Door lock confirmation
light
Both front doors
60 sec
90 sec
p. 42
Triple indicator
Off
Off
On
Temporary LH traffic
Unlock confirmation light
Off
On
On
p. 58
and 62
Off
Off
or
Temporary RH traffic
On
Off
206
p. 93
On
On
Audible confirmation
p. 95
30 sec
Ambient light
colours
Any door
Ask when exiting
60 sec
Ambient light
All doors
Activate once
30 sec
Floor lights
Keyless entry
p. 44
and 95
Off
Interior light
Driver door, then
all
Reduced Guard
Approach light duration
p. 94
Light settings
All doors
p. 104
Fold mirrors
On
Doors unlock
05
Side mirror settings
p. 95
05 Comfort and driving pleasure
Menu source MY CAR
Active bending lights
p. 91
On
Off
Collision Warning
p. 87
On
On
Off
Off
On
Normal
Off
Increased sensitivity*
Warning sound
Steering wheel force
Low
p. 233
On
On
Off
Off
Assistance alternatives
Medium
Vibration only
High
Full function
On
Reset car settings
All menus in Car settings are
given original factory settings.
Driver support systems
05
Steering assist
only
Speed in infotainment display
Off
p. 180
On at start-up
Long
Short
Off
Lane Keeping Aid
On
Warning distance
Auxiliary lights
p. 167
Road Sign Information
p. 141
On
Off
Speed alert
On
Off
``
* Option/accessory, for more information, see Introduction.
207
05 Comfort and driving pleasure
Menu source MY CAR
p. 138
DSTC
On
p. 75
Time
The instrument panel clock is set
here.
Off
Time format
City Safety
p. 161
On
On
Off
p. 75
12 h
24 h
Off
p. 194
On
Off
05
On
Off
p. 158
MPG (UK)
MPG (US)
Off
km/l
The current screen content
returns if any of the TV screen's
buttons or controls are actuated.
On
Language
Off
p. 203
On
The TV screen's current content
fades out after a period of inactivity and is replaced by a blank
screen if this option is selected.
Cross Traffic Alert
Distance Alert
Explanatory text for the display
screen's current content is shown
with this option selected.
Distance and fuel units
Screen saver
BLIS
Show help text
l/100km
Temperature unit
Celsius
Fahrenheit
Selects the unit for the display of
outside temperature and setting
of the climate control system.
Selects language for menu texts.
Driver Alert
On
Off
p. 176
Volume levels
Voice output volume
Front park assist volume
Rear park assist volume
System options
208
Phone ringing volume
p. 229
05 Comfort and driving pleasure
Menu source MY CAR
Reset system options
All menus in System options are
given original factory settings.
Voice settings
Only in cars with Volvo GPS navigator RTI* - see separate manual.
Voice tutorial
This menu option + OK provides
spoken information about how
the system works.
Voice command list
Phone commands
Phone
Phone call contact
Phone dial number
Navigation commands
Navigation
Navigation
repeat instruction
Navigation go to
address
General commands
and detailed information - see
page 267.
The menu options under Navigation commands show several
examples of available voice commands in the Navigation system.
Voice user setting
Default setting
User 1
User 2
Here there is the option to create
a second user profile - an advantage if more than one person shall
use the car/system regularly.
Default setting restores factory
settings.
05
Help
Cancel
Voice tutorial
The menu options under Phone
commands show several examples of available voice commands
- only with a BluetoothŸ-enabled
mobile phone installed. For more
``
* Option/accessory, for more information, see Introduction.
209
05 Comfort and driving pleasure
Menu source MY CAR
Voice training
User 1
User 2
05
With Voice training the voice
recognition system is taught to
recognise the driver's voice and
pronunciation. A number of phrases are presented on the screen
for the driver to read aloud. When
the system has learnt how the
driver talks, the presentation of
the phrases stops. Following
which e.g. User 1 can be
selected in Voice user setting in
order that the system shall listen
to the right user.
Voice POI list
Automatic blower adjustment
Edit list
Normal
The number of facilities is extensive and varies depending on
market. Maximum 30 favourite
facilities can be stored in this list.
High
Low
Recirculation timer
On
For more information on Facilities
and Voice recognition - see the
Navigation system's owner's
manual.
Audio settings
p. 217
Off
Automatic rear defroster
p. 240
On
Off
Climate settings
Interior air quality system
On
Off
Voice output volume
A volume control appears on the
screen - at which point, proceed
as follows:
Reset climate settings
All menus in Climate settings
are given original factory settings.
1. Adjust the volume with the
thumbwheel.
Favourites (FAV)
2. Test-listen using OK.
Volvo On Call
3. Use EXIT to store the setting
and the menu is switched off.
Described in a separate manual.
Information
210
p. 244
05 Comfort and driving pleasure
Menu source MY CAR
Number of keys
p. 42
VIN number
p. 366
DivX® VOD code
p. 260
Bluetooth software version in
car
p. 266
Map and software version*
Only in cars with Volvo GPS navigator - see separate manual.
05
* Option/accessory, for more information, see Introduction.
211
05 Comfort and driving pleasure
Climate control
General
Climate control
The car is equipped with electronic climate
control. The climate control system cools or
heats as well as dehumidifies the air in the passenger compartment.
NOTE
The air conditioning system (AC) can be
switched off, but to ensure the best possible
climate comfort in the passenger compartment and to prevent the windows from misting, it should always be on.
Sensor location
• The sun sensor is located on the top side
of the dashboard.
• The temperature sensor for the passenger
compartment is located below the climate
control panel.
• The outside temperature sensor is located
in the door mirror.
NOTE
Do not cover or block the sensors with
clothing or other objects.
Side windows
05
Actual temperature
The temperature you select corresponds to the
physical experience with reference to factors
such as air speed, humidity and solar radiation
etc. in and around the car.
The system includes a sun sensor which
detects on which side the sun is shining into
the passenger compartment. This means1 that
the temperature can differ between the right
and left-hand air vents despite the controls
being set for the same temperature on both
sides.
1
212
Only applies to ECC.
To ensure that the air conditioning works optimally, the side windows must be closed.
off. There may then be a temporary increase in
temperature in the passenger compartment.
Condensation
In warm weather, condensation from the air
conditioning may drip under the car. This is
normal.
Ice and snow
Remove ice and snow from the climate control
system air intake (the grille between the bonnet
and the windscreen).
Total airing function
The function opens/closes all side windows
simultaneously and can be used for example to
quickly air the car during hot weather, see
page 55.
Misting windows
Passenger compartment filter
Remove misting on the insides of the windows
by primarily using the defroster function.
All air entering the car's passenger compartment is cleaned with a filter. This must be
replaced at regular intervals. Follow the Volvo
Service Programme for the recommended
replacement intervals. If the car is used in a
severely contaminated environment, it may be
necessary to replace the filter more often.
To reduce the risk of misting, keep the windows clean and use window cleaner.
Temporary shut-off of the air
conditioning
When the engine requires full power, e.g. for full
acceleration or driving uphill with a trailer, the
air conditioning can be temporarily switched
05 Comfort and driving pleasure
Climate control
NOTE
There are different types of passenger compartment filter. Make sure that the correct
filter is fitted.
Clean Zone Interior Package (CZIP)*
This option keeps the passenger compartment
clear of allergy and asthma inducing substances. For more information on CZIP, see the
brochure included with the purchase of the car.
The following is included:
• An enhanced fan function that means that
the fan starts when the car is opened with
the remote control key. The fan fills the
passenger compartment with fresh air. The
function starts when required and is disengaged automatically after a time or when
one of the passenger compartment doors
is opened. The amount of time the fan runs
is reduced gradually due to reduced need
up until the car is 4 years old.
• The air quality system IAQS is a fully automatic system that cleans the air in the passenger compartment from contaminants
such as particles, hydrocarbons, nitrous
oxides and ground-level ozone.
• Fan speed in automatic mode*, see
NOTE
page 218.
To maintain the CZIP standard in cars with
CZIP the IAQS filter should be changed after
15 000 km or once per year depending on
whichever occurs first. However, up to
75 000 km over 5 years. In cars without CZIP
and where the customer does not want to
retain the CZIP standard, the IAQS filter
must be replaced during a regular service.
Use of tested materials in the interior
equipment.
The materials have been developed in order to
minimise the quantity of dust in the passenger
compartment and they contribute to making
the passenger compartment easier to keep
clean. The carpets in both the passenger compartment and the cargo area are removable
and easy to remove and clean. Use cleaning
agents and car care products recommended
by Volvo, see page 359.
• Recirculation timer for passenger compartment air, see page 220.
• Automatic rear window defrosting, see
page 105.
• Air quality system IAQS*, see page 220
The climate control system's functions can be
reset to the default settings via the menu system in MY CAR and this is carried out under:
Settings Climate settings Reset
climate settings.
Air distribution
05
Menu settings
It is possible to activate/deactivate or change
the default settings for four of the climate control system's functions via the centre console.
For general information about menu navigation, see page 204:
The incoming air is divided between a number
of different vents in the passenger compartment.
* Option/accessory, for more information, see Introduction.
213
05 Comfort and driving pleasure
Climate control
Air distribution is fully automatic in AUTO
mode*.
If necessary it can be controlled manually, see
page 221.
Air vents in the dashboard
05
Open
Closed
Lateral airflow
Vertical airflow
Aim the vents at the side windows to remove
misting.
NOTE
Remember that small children may be sensitive to air flows and draughts.
214
* Option/accessory, for more information, see Introduction.
05 Comfort and driving pleasure
Climate control
Electronic climate control, ECC*
05
Fan
AUTO
Electrically heated front seat, left-hand
side
Heated windscreen* and max. defroster
Air distribution - ventilation floor
Setting, left/right side for temperature regulation
Electrically heated front seat, right-hand
side
Temperature control
Recirculation
AC – – Air conditioning on/off
Air distribution - air vent instrument panel
Air distribution - defroster windscreen
Rear window and door mirror defrosters,
see page 105
* Option/accessory, for more information, see Introduction.
215
05 Comfort and driving pleasure
Climate control
Electronic Temperature Control, ETC
05
Fan
Recirculation
Electrically heated front seat, left-hand
side
Electrically heated front seat, right-hand
side
AC – – Air conditioning on/off
Temperature control
Heated windscreen* and max. defroster
Air distribution - ventilation floor
Air distribution - air vent instrument panel
Air distribution - defroster windscreen
Rear window and door mirror defrosters,
see page 105
216
* Option/accessory, for more information, see Introduction.
05 Comfort and driving pleasure
Climate control
Operating the controls
Press the button four times to switch off the
heat – no fields are lit.
Press the button four times to switch off the
heat – no lamps illuminate.
Heated seats*
Fan
WARNING
Front seats
Heated seats must not be used by people
who find it difficult to perceive an increase
in temperature due to a lack of sensation or
who otherwise have problems operating the
controls for the heated seats. Otherwise
they may suffer burn injuries.
NOTE
If the fan is fully switched off then the air
conditioning is not engaged - which can
cause a risk of misting on the windows.
Fan knob for ECC*
Rear seat
Turn the knob to increase or
decrease fan speed, AUTO is
disengaged. If AUTO is
selected, the fan speed is
regulated automatically - the
fan speed previously set is
disengaged.
Current heat level is shown in the centre console
TV screen.
Press the button once for the
highest heat level - three
orange fields are lit in the centre console TV screen (see figure above).
05
Fan knob for ETC
Turn the knob to increase or
decrease fan speed.
Press the button twice for a
lower heat level – two orange fields are lit in the
TV screen.
Press the button once for the highest heat level
– three lamps illuminate.
Press the button three times for the lowest heat
level – one orange field it lit in the TV screen.
Press the button twice for a lower heat level –
two lamps illuminate.
Press the button three times for the lowest heat
level – one lamp illuminates.
* Option/accessory, for more information, see Introduction.
217
05 Comfort and driving pleasure
Climate control
Air distribution
Climate settings Automatic blower
adjustment. Choose between Low, Normal
or High:
• Low - Automatic fan control. Low airflow
is prioritised.
• Normal - Automatic fan control.
• High - Automatic fan control. A more
intense airflow is prioritised.
For a description of the menu system, see
page 204.
Air distribution - defroster windscreen
05
Air distribution - air vent instrument panel
Air distribution - ventilation floor
The figure consists of three buttons. When
pressing the buttons the corresponding figure
is illuminated in the TV screen (see figure
below) and an arrow in front of each part of the
figure shows the air distribution that is
selected. For more information on air distribution, see page 221.
The selected air distribution is shown in the centre
console TV screen.
AUTO1
The Auto function automatically regulates temperature,
air conditioning, fan speed,
recirculation, and air distribution.
If you select one or more manual functions, the
other functions continue to be controlled automatically. All manual settings are disengaged
when AUTO is pressed. The TV screen shows
AUTO CLIMATE.
Fan speed in automatic mode can be set in the
menu system MY CAR under: Settings
1
218
Only applies to ECC.
Temperature control
When the car is started, the most recent setting
is resumed.
05 Comfort and driving pleasure
Climate control
AC – Air conditioning on/off
NOTE
Heating or cooling cannot be hastened by
selecting a higher or lower temperature than
the actual desired temperature.
Temperature regulation ECC*
The temperatures on the
driver and passenger sides
can be set independently.
Repeatedly press L/R in the
button to select the setting for
left, right or both sides. Set
the temperature using the
knob - the selected temperature for either side
is displayed in the centre console display.
Temperature regulation ETC
The temperature in the passenger compartment can be
adjusted with the knob.
Heated windscreen* and max. defroster
When the lamp in the AC button illuminates, the air conditioning is controlled by the
system's automatic function.
This way, incoming air is
cooled and dehumidified as
required.
When the lamp in the AC button is switched off
the air conditioning is disconnected. Other
functions are still controlled automatically.
When the max. defroster function is activated
the air conditioning is switched on automatically, so that the air is dehumidified at the maximum setting.
The selected setting is shown in the centre console TV screen.
Electric heating*
05
Max. defroster
Used to quickly remove misting and ice from the windscreen and side windows.
The light in the defroster button illuminates when the function is active.
* Option/accessory, for more information, see Introduction.
219
05 Comfort and driving pleasure
Climate control
For cars without heated windscreens:
• One press on the button makes air flow to
the windows - symbol (2) shines in the display.
• Two presses switches off the function - no
symbol shines.
NOTE
The noise level increases as the fan is operating at max.
When the defroster is switched off the climate
control returns to the previous settings.
For cars with heated windscreens, the function
operates as follows:
Recirculation
• One press on the button starts heating the
Recirculation
windscreen2 - symbol (1) shines in the display.
• Two presses on the button start heating
the windscreen2 and air flows to the windows - the symbols (1) and (2) shine in the
display.
05
• Three presses switches off the function no symbol shines.
The following also takes place when the function is active in order to provide maximum
dehumidification in the passenger compartment:
• the air conditioning is automatically
engaged
When recirculation is
engaged the orange lamp in
the button illuminates. The
function is selected to shut
out bad air, exhaust gases
etc. from the passenger compartment. The air in the passenger compartment is recirculated, i.e. no
outside air is taken into the car when this function is activated.
IMPORTANT
If the air in the car recirculates for too long,
there is a risk of misting on the insides of the
windows.
• recirculation and the air quality system are
automatically disengaged.
Timer
With the timer function activated the system
will exit manually activated recirculation mode
2
220
The compass goes off when the heated windscreen is active.
* Option/accessory, for more information, see Introduction.
according to a time that depends on the outside temperature. This reduces the risk of ice,
misting and bad air. Activate/deactivate the
function in the menu system MY CAR under
Settings Climate settings
Recirculation timer. For a description of the
menu system, see page 204.
NOTE
When max. defroster is selected, recirculation is always deactivated.
Air quality system IAQS*
The air quality system separates gases and
particles to reduce the levels of odours and
pollution in the passenger compartment. If the
outside air is contaminated then the air intake
is closed and the air is recirculated.
Activate/deactivate the function in the menu
system MY CAR under Settings Climate
settings Interior air quality system. For a
description of the menu system, see
page 204.
05 Comfort and driving pleasure
Climate control
Cars with Eco Start/Stop DRIVe*
NOTE
The air quality sensor must always be enabled to ensure the best air in the passenger
compartment.
In a cold climate, automatic recirculation is
limited so as to prevent misting.
With an auto-stopped engine certain equipment has its function temporarily reduced, e.g.
climate control air conditioning and fan speed.
For more information, see page 123.
Air distribution table
Air distribution
Use
Air distribution
Use
A large amount of hot air
flows to the windows.
to remove ice and misting
quickly.
Air to the floor and windows. Some air flows
from the dashboard air
vents.
to ensure comfortable
conditions and good
demisting in cold or
humid weather.
Air to floor and from
dashboard air vents.
in sunny weather with
cool outside temperatures.
Air to windscreen, via
defroster vent, and side
windows. Some air flows
from the air vents.
to prevent misting and
icing in a cold and humid
climate, (not at too low
fan speed to enable this).
* Option/accessory, for more information, see Introduction.
05
221
05 Comfort and driving pleasure
Climate control
05
222
Air distribution
Use
Air distribution
Use
Airflow to windows and
from dashboard air vents.
to ensure good comfort in
warm, dry weather.
Air to floor. Some air
flows to the dashboard
air vents and windows.
to direct heat or cold to
the floor.
Airflow to the head and
chest from the dashboard
air vents.
to ensure efficient cooling
in warm weather.
Airflow to windows,
from dashboard air
vents and to the floor.
to provide cooler air
along the floor or warmer
air higher up in cold
weather or hot, dry
weather.
05 Comfort and driving pleasure
Fuel-driven engine block heater and passenger compartment heater*
Fuel-driven heater
Refuelling
Battery and fuel
If the battery has insufficient charge or the fuel
level is too low, the parking heater will be
switched off automatically and a message
appears on the information display. Acknowledge the message by pressing the indicator
stalk OK button once, see page 224.
General information about the parking
heater
The parking heater heats the engine and passenger compartment and can be started
directly or with the timer.
Two different times can be selected using the
timer. Here, time refers to the time when the car
is heated and ready. The car's electronic system calculates when heating should be started
based on the outside temperature.
The heater cannot start if the outside temperature exceeds 15 °C. At –5 °C or lower the
maximum running time of the parking heater is
50 minutes.
WARNING
The car must be outdoors when the parking
heater is used.
NOTE
When the parking heater is active there may
be smoke from underneath the car, which is
perfectly normal.
1
IMPORTANT
Repeated use of the parking heater combined with short journeys may discharge the
battery and impair starting.
Warning label on fuel filler flap.
WARNING
Fuel which spills out could be ignited.
Switch off the fuel-driven heater before starting to refuel.
The car should be driven for the same time
as the heater is used to ensure that the car's
battery is recharged adequately to replace
the energy consumed by the heater when it
is used on a regular basis.
05
Check on the information display that the
parking heater is switched off. When it is
running, the information display shows
Auto heater ON1.
Parking on a hill
If the car is parked on a steep hill, the front of
the car should point downhill to ensure that
there is a supply of fuel to the parking heater.
Analogue combined instrument panel.
* Option/accessory, for more information, see Introduction.
223
05 Comfort and driving pleasure
Fuel-driven engine block heater and passenger compartment heater*
Symbols and display messages2
When one of the timer's settings or
Direct start is activated, the information symbol in the combined instrument
panel illuminates while the information display
shows an explanatory text and a further illuminated symbol. The table shows symbols and
display texts that appear.
Symbol
G025102
Operation
Display
Specification
Auto
heater
ON
The heater is
switched on and
running.
The heater's timer
is activated after
the remote control
key has been
removed from the
ignition switch and
leaving the car the engine and
passenger compartment are
heated at the set
time.
Information display (analogue combined instrument panel) and menu navigation controls.
05
OK button
Thumbwheel
G025102
NOTE
- Figure 2 in the symbol means the
second climate control system in the car,
where the normal climate control system is
the first. The figure 2 has nothing to do with
the timer.
For more information on the information display and OK, see pages 69 and 200.
2
224
Analogue combined instrument panel.
* Option/accessory, for more information, see Introduction.
G025102
RESET
Fuel
operated
heater
stopped
Battery
saving
mode
The heater has
been stopped by
the car's electronics in order to facilitate starting the
engine.
05 Comfort and driving pleasure
Fuel-driven engine block heater and passenger compartment heater*
G025102
G025102
Symbol
Display
Specification
Following the direct start of the heater it will be
activated for 50 minutes.
Fuel
operated
heater
stopped
Low fuel
level
Fuel
operated
heater
Service
required
Setting the heater
is not possible due
to fuel level being
too low - this is in
order to facilitate
starting the engine
as well as
approx. 50 km
driving.
Heater not working. Contact a
workshop for
repair. Volvo recommends that you
contact an authorised Volvo workshop.
A display text clears automatically after a time
or after one press on the indicator stalk OK
button.
3
4
Direct start and immediate stop
Heating of the passenger compartment will
begin as soon as the engine coolant has
reached the correct temperature.
2. Select one of the two timers using the
thumbwheel and confirm with OK.
3. Briefly press OK to move to the lit hours
setting.
4. Select the required hour using the thumbwheel.
5. Briefly press OK to move to the lit minutes
setting.
NOTE
The car can be started and driven while the
parking heater is running.
1. Scroll with the thumbwheel to Parking
heater3 and select with OK.
2. In the next menu, scroll to Direct start and
select with OK to activate/deactivate.
3. Exit the menu with RESET.
6. Select the required minute using the
thumbwheel.
7. Press OK4 to confirm the setting.
8. Go back in the menu structure using
RESET.
05
9. Select the other time (continue from step 2)
or exit the menu with RESET.
Start the timer
Heater timer
The time when the car shall be used and heated
is specified with the timer.
1. Scroll with the thumbwheel to Parking
heater3 and select with OK.
Setting the timer
2. Select one of the two timers using the
thumbwheel and confirm with OK.
1. Scroll with the thumbwheel to Parking
heater3 and select with OK.
3. Activate the marked timer with OK.
Analogue combined instrument panel.
Press OK again to activate the timer.
* Option/accessory, for more information, see Introduction.
225
05 Comfort and driving pleasure
Fuel-driven engine block heater and passenger compartment heater*
Deactivating the timer
A timer-started heater can be switched off
manually before the set time has elapsed. Proceed as follows:
NOTE
All timer programming will be cleared if the
car's clock is reset.
1. Press OK.
2. Scroll with the thumbwheel to Parking
heater3 and select with OK.
> If a timer is set but not activated, a clock
icon is shown next to the set time.
3. Select one of the two timers using the
thumbwheel and confirm with OK.
4. Deactivate the timer as follows:
• long press on OK or
• short press on OK to continue in the
05
menu. Then select to stop the timer and
confirm with OK.
A timer-started heater can be switched off as
described in the instructions in the section
"Direct start and immediate stop"; see page
225.
Clock/timer
The heater's time is connected to the car's
clock.
3
226
Analogue combined instrument panel.
* Option/accessory, for more information, see Introduction.
05 Comfort and driving pleasure
Additional heater*
General information about the
additional heater
For cars with diesel engines sold in cold climate zones1 an additional heater may be
required to obtain the correct operating temperature in the engine and to obtain sufficient
heating in the passenger compartment.
In such instances, the car is equipped with
either:
• an additional electric heater or
• a fuel-driven additional heater2.
Electric additional heater
The heater cannot be controlled manually but
is instead activated automatically after the
engine has been started in outside temperatures below 9 °C and is switched off after the
set passenger compartment temperature has
been reached.
Fuel-driven additional heater
The heater starts automatically when extra
heat is required when the engine is running.
The heater is switched off automatically when
the correct temperature is reached or when the
engine is switched off.
NOTE
When the auxiliary heater is active there may
be smoke from underneath the car, which is
perfectly normal.
Auto mode or shutdown
The additional heater's automatic start
sequence can be switched off if required.
Information display (analogue combined instrument panel) and menu navigation controls.
OK button
05
Thumbwheel
RESET button
1. Before starting the engine: Select key position I, see page 80.
2. Scroll with the thumbwheel to Additional
heat auto.
3. Press RESET to select between ON and
OFF.
1
2
An authorised Volvo dealer has information regarding the geographical areas concerned.
For cars fitted with parking heaters, see page 223.
* Option/accessory, for more information, see Introduction.
227
05 Comfort and driving pleasure
Additional heater*
NOTE
The menu options are only visible in key
position I - any adjustments must therefore
be made before starting the engine.
05
228
* Option/accessory, for more information, see Introduction.
05 Comfort and driving pleasure
Trip computer
General
The trip computer comes in two variants, with
differing content and appearance – "Analog" or
"Digital".
NOTE
Menu options
Information
Additional heater*
For more information, see page 227.
– Auto On
The trip computer's menu is in a variable loop.
One of the "Analog" menu options is a blank
display - it also marks the beginning/end of the
loop. With this option in the "Digital" instrument
panel, the two trip computer displays go blank.
If a warning message appears when the trip
computer is used then the message must
first be acknowledged before the trip computer can be reactivated. Acknowledge the
warning message by briefly pressing the
indicator lever's OK button.
Menu options
Information
Distance to empty,
km to empty tank
"Analog" instrument panel
Digital speed
Select "km/h" or
"mph".
– Fuel consumption
Parking heater*
1. Select the box
for Hours or
Minutes using
the thumbwheel and activate the box
with OK.
- Direct start
- Timer 1 - leads to
the menu for selecting time.
- Timer 2 - leads to
the menu for selecting time.
"Analog" information display with controls.
OK – Opens the trip computer menus and
activates the relevant option.
Thumbwheel – Scroll among trip control
options.
RESET – Cancel or go back one step.
2. Select a number
using the
thumbwheel
and program it
with OK.
3. Select the next
box or back out
with RESET.
– Off
TC options
– Average speed
- Trip meter T1 and
total dist.
Select the option to
be shown in the display.
• Scroll among
the options
using the
thumbwheel
and select with
OK.
05
- Trip meter T2 and
total dist.
– Driver Support
- No text - Loop
start/stop
Service status
Shows the number
of months and the
distance until the
next service.
For more information, see page 223.
* Option/accessory, for more information, see Introduction.
229
05 Comfort and driving pleasure
Trip computer
Menu options
Information
ously – one function in the left and one in the
right display.
Menu options
Information
Engine oil level
Wait...A
For more information, see page 331.
The following combinations can be accessed
with the thumbwheel:
Settings*
Select Auto On or
Off.
Messages
A
For more information, see page 200.
Certain engines.
"Digital" instrument panel
• "Average consumption" and "Average
speed"
• "Current consumption" and "Distance to
•
•
05
empty fuel tank:"
"Current consumption" and "Digital speed
display"
No text - Loop start/stop
Menu options
Information
Trip computer
reset
Select the desired
option using the
thumbwheel and
activate with OK.
- l/100 km
- km/h
- Reset both
"Digital" information display with controls.
OK – Opens the trip computer menus and
activates the relevant option.
Messages
For more information, see page 200.
Themes
Instrument panel
appearance is
selected here, see
page 70.
Thumbwheel – Scroll among trip control
options.
RESET – Cancel or go back one step.
In the "Digital" display version, two trip computer functions can be displayed simultane-
230
– Additional
heater
* Option/accessory, for more information, see Introduction.
For more information, see page 227.
Contrast mode/
Colour mode
Adjust instrument
panel appearance.
Parking heater*
1. Select the box
for Hours or
Minutes using
the thumbwheel and activate the box
with OK.
– Direct start
- Timer 1 - leads to
the menu for selecting time.
- Timer 2 - leads to
the menu for selecting time.
2. Select a number
using the
thumbwheel
and program it
with OK.
3. Select the next
box or back out
with RESET.
For more information, see page 223.
05 Comfort and driving pleasure
Trip computer
A
Menu options
Information
Service status
Shows the number
of months and the
distance until the
next service.
Engine oil level
Wait...A
For more information, see page 331.
Certain engines.
Functions
A description of a few trip computer functions
is found below:
Average
Average fuel consumption is calculated from
the last resetting.
NOTE
There may be a slight error in the reading if
a fuel-driven heater* has been used.
Average speed
Average speed is calculated from the last
resetting.
1
Instantaneous
Digital speed display1
Current fuel consumption is calculated every
second. The information on the display is
updated every couple of seconds. When the
car is stationary, "----" appears on the display.
The speed is shown in the opposite unit (kmh/
mph) of the main instrument panel. If the
speedometer indicates speed in mph, the display is changed to km/h.
Cars with the Start/Stop function show "0,0 L/
100km" when the engine is in auto-stop mode.
Resetting with "Analog"
1. Select --- km/h average speed or --.- l/
100km average.
Km to empty tank
The calculation is based on the average fuel
consumption over the last 30 km and the
remaining driveable fuel quantity. The display
shows the approximate distance that can be
driven with the fuel quantity remaining in the
tank.
2. A brief press (approx. 1 second) on
RESET resets the selected function.
Resetting with "Digital"
Find "Reset" in the menu system and select
that option.
An economic driving style generally results in a
longer driving distance. For more information
on how fuel consumption can be influenced,
see page 10.
"Reset" is also activated via a long press (4
seconds) on RESET. The displayed trip meter
(T1 or T2) is also reset.
No guaranteed range remains when the display
shows "---- km to empty tank". Refuel as
soon as possible.
To change unit (metric/imperial) for distance
and speed - go to MY CAR Settings
System options Distance and fuel units,
see page 203.
NOTE
There may be a slight error in the reading if
the driving style has been changed.
05
Changing unit
NOTE
In addition to the trip computer, these units
are also changed at the same time in Volvo's
GPS navigator RTI.
For "Digital" instrument panel only.
* Option/accessory, for more information, see Introduction.
231
05 Comfort and driving pleasure
Trip computer
Trip statistics*
Operation
The car stores information on completed trips,
including average fuel consumption and average speed. These can be viewed on the TV
screen as a block diagram.
A setting can be made in the MY CAR menu
system:
Function
MY CAR
My V40
Trip statistics:
• Start new trip - ENTER is used to clear all
previous statistics. Back out of the menu
with EXIT.
• Reset for every driving cycle - mark the
box with ENTER and back out of the menu
with EXIT.
With the "Reset for every driving cycle"
option marked, all statistics are automatically
cleared after the car is parked and stationary
for 4 hours. The next time the engine is started,
trip statistics start again from zero.
05
Trip statistics.
Each block symbolises 1 km or 10 km, depending on which scale is selected. The diagram
displays 10 blocks: Blocks 1-9 show the last
9 or 90 km driven - the block at the far right
shows the value of the kilometre or 10 km current being driven.
If a new driving cycle is started before the
4 hours have elapsed, the current period must
first be deleted manually using the "Start new
trip" option.
See also the information on Eco Guide on page
121.
With the TUNE wheel, the scale of each block
can be switched between 1 km and 10 km - the
cursor at the far right shifts position between
up and down depending on the scale selected.
232
* Option/accessory, for more information, see Introduction.
05 Comfort and driving pleasure
Adapting driving characteristics
Speed related power steering*
Steering force increases with the speed of the
car to give the driver enhanced sensitivity. The
steering is firmer and more immediate on
motorways. Steering is light and requires no
extra effort when parking and at low speed.
The driver can choose between three different
levels of steering force for road responsiveness
or steering sensitivity. Go to the menu system
MY CAR and locate Settings Car settings
Steering wheel force and select Low,
Medium or High.
For a description of the menu system, see
page 203. This menu cannot be accessed
while the car is in motion.
05
* Option/accessory, for more information, see Introduction.
233
05 Comfort and driving pleasure
Comfort inside the passenger compartment
Storage spaces
05
234
05 Comfort and driving pleasure
Comfort inside the passenger compartment
Storage compartment1 in door panel
Storage compartment, driver’s side
Ticket clip
Storage compartment
Glovebox
Storage pocket* 2on front edge of front
seat cushions
Storage compartment, driver’s side
WARNING
Do not keep any sharp objects in the compartment, or objects which protrude.
Armrest
When closed, the armrest can be adjusted*
longitudinally.
Jacket holder
The jacket holder is only designed for light
clothing.
Cigarette lighter and ashtray*
The ashtray in the tunnel console is detached
by lifting the tray straight up.
Storage compartment, cup holder
Jacket holder
specified then there is a cigarette lighter in
the 12 V socket for the front seat, see
page 236, and a detachable ashtray in the
cup holder.)
Tunnel console
Activate the lighter by pushing in the button.
The button pops out when the lighter is hot. Pull
out the lighter and light a cigarette on the
heated coils.
Cup holder* in rear seat
Storage pocket2
05
Storage compartment, rear seat
WARNING
Keep loose objects such as mobile phones,
cameras, remote controls for accessories,
etc. in the glove compartment or other compartments. Otherwise they may injure people in the car in the event of sudden braking
or a collision.
Storage compartment (e.g. for CDs) and
USB*/AUX input under the armrest.
Includes cup holder for driver and passenger. (If ashtray and cigarette lighter are
1
2
With ice scraper holder on the driver’s side.
Not applicable to textile upholstery.
* Option/accessory, for more information, see Introduction.
235
05 Comfort and driving pleasure
Comfort inside the passenger compartment
Glovebox
Cooling is active when the climate control system is active, i.e. when the key is in position II
or the engine is running.
The light illuminates automatically when the
cover is lifted.
12 V socket
Inlay mats*
Volvo supplies specially manufactured inlay
mats.
WARNING
Before setting off check that the inlaid mat
in the driver area is firmly affixed and
secured in the pins in order to avoid getting
caught adjacent to and under the pedals.
05
The owner's manual and maps can be kept
here for example. There are also holders for
pens on the inside of the lid. The glovebox can
be locked* using the key blade, see pages 46
and 56.
Vanity mirror
12 V socket in tunnel console, front seat.
The electrical sockets can be used for various
accessories designed for 12 V, e.g. TV screens,
music players and mobile phones. For the
sockets to supply current, the remote control
key must be in at least key position I, see
page 79.
Cooling3
The glovebox can also be used as a cooled
area.
Start cooling by moving the control in
towards the passenger compartment to
the end position.
WARNING
Switch off the cooling by moving the control forwards to the end position.
Always leave the plug in the socket when
the socket is not in use.
Vanity mirror with lighting.
3
236
Applicable only to cars with ECC.
* Option/accessory, for more information, see Introduction.
05 Comfort and driving pleasure
Comfort inside the passenger compartment
NOTE
Optional equipment and accessories - e.g.
TV screens, music players and mobile
phones - which are connected to one of the
passenger compartment's 12V electrical
sockets, could be activated by the climate
control system, even when the remote control key has been removed or when the car
is locked, for example, when the parking
heater is activated at a preset time.
For this reason remove the plugs from the
electrical sockets for optional equipment or
accessories when not in use because the
battery could be drained in the event of such
an occurrence!
05
IMPORTANT
Max. power takeoff is 10 A (120 W) in either
socket.
NOTE
The compressor for temporary emergency
puncture repair has been tested and
approved by Volvo. For information on the
use of Volvo's recommended temporary
emergency puncture repair (TMK), see
page 320.
Electrical socket in cargo area*
For more information, see page 296.
* Option/accessory, for more information, see Introduction.
237
General information on infotainment.....................................................
Radio.....................................................................................................
Media player.........................................................................................
External audio source via AUX/USB* input...........................................
240
250
257
261
Media BluetoothŸ* ................................................................................ 264
BluetoothŸ handsfree*..........................................................................
Voice recognition* mobile phone..........................................................
TV*.........................................................................................................
Remote control* ...................................................................................
238
* Option/accessory, for more information, see Introduction.
267
275
279
282
INFOTAINMENT SYSTEM
06 Infotainment system
General information on infotainment
General
The Infotainment system consists of a radio,
media player, TV* and the option to communicate with a mobile phone*. Information is presented on a 5 or 7-inch* colour screen in the
upper section of the centre console. Functions
can be controlled via buttons in the steering
wheel, under the colour display in the centre
console or via a remote control*. The mobile
phone can also be voice-controlled in certain
cases.
If the Infotainment System is active when the
engine is switched off then it is automatically
activated the next time the key is inserted into
key position I or higher, and it continues with
the same source (e.g. radio) as before the
engine was switched off (the driver's door must
be closed on cars with Keyless systems*).
06
The infotainment system can be used for 15
minutes at a time without the remote control
key being in the ignition switch by pressing the
On/Off button.
NOTE
Remove the remote control key from the
ignition switch if the infotainment system is
used when the engine is switched off. This
is to avoid discharging the battery unnecessarily.
Dolby, Pro Logic1
The Audyssey MultEQ system has been used
in the development and tuning of the sound to
ensure a world-class sound experience.
Made under license from Dolby Laboratories.
Dolby, Pro Logic and the double-D symbol are
trademarks of Dolby Laboratories.
When the car is being started the infotainment
system is switched off temporarily and continues when the engine has started.
1
240
Audyssey MultEQ1
Only applies to Premium Sound Multimedia.
* Option/accessory, for more information, see Introduction.
06 Infotainment system
General information on infotainment
Overview
Operating the system
Scroll/fast forward/search - A short
press scrolls among tracks or preset radio stations4. A long press fast forwards through disc
tracks or searches for the next available radio
station.
SOUND - press for access to audio settings
(bass, treble, etc.). For more information, see
page 245.
VOL - raise or lower volume.
AUX2 and USB3 inputs for external audio
sources (e.g. iPodŸ)
Steering wheel keypad (with*/without
thumbwheel).
TV screen. The TV screen is available in
two sizes: 5 and 7-inch. The manual shows
a 7-inch TV screen.
Centre console control panel
2
3
4
ON/OFF/MUTE - short press starts the
system and long press (until the screen is off)
switches off. Note that the whole of the Sensus
system (including navigation * and phone functions*) starts/switches off at the same time.
Briefly press to mute the sound (MUTE) or
restore the sound if it had been switched off.
Main sources - press to select the main
source (e.g. RADIO, MEDIA). Last active
source is shown (e.g. FM1). A new source view
is selected if the main source button is pressed
while in RADIO or MEDIA. If you are in TEL* or
NAV* and press the main source button then a
shortcut menu is shown with commonly used
menu options.
06
Applicable to Performance only
Not applicable to Performance
Does not apply to DAB.
``
* Option/accessory, for more information, see Introduction.
241
06 Infotainment system
General information on infotainment
OK/MENU - press the thumbwheel in the
steering wheel or the button in the centre console to accept a menu selection. If OK/MENU
is pressed while in the normal view, a menu for
the selected source opens (e.g. RADIO or
MEDIA). Arrow to the right of the screen is
shown when there are underlying menus.
TUNE - turn the thumbwheel in the steering
wheel or the knob in the centre console to scroll
among tracks/folders, radio and TV* stations,
phone contacts* or to navigate among choices
on the TV screen.
06
FAV – shortcut to a favourite setting. The
button can be programmed for a commonly
used function in AM, FM, etc. For more information, see page 244.
MUTE5 - press to switch off the radio/media
audio or restore the audio if it has been
switched off.
Voice recognition6 - press to activate
voice recognition (for mobile phone and navigation system connected via BluetoothŸ*).
EXIT - short press leads upwards in the
menu system, interrupts current function, interrupts/rejects phone calls or erases entered
characters. A long press leads to the normal
view or, if already in the normal view, to the
highest menu level (main source view). From
there you can reach the same main source buttons as those on the centre console (4).
INFO - If more information than can be
shown on the screen is available, press the
INFO button to see the remaining information.
Preset buttons, input of numbers and letters.
5
6
242
Cars without navigation.
Cars with navigation*.
* Option/accessory, for more information, see Introduction.
06 Infotainment system
General information on infotainment
Menus
06
The example shows navigation to different functions when a disc is played back. (1) Main source button, (2) Normal view, (3) Shortcut/source menu, (4) Quick
menu, (5) Source menu
``
243
06 Infotainment system
General information on infotainment
Select main source by pressing a main source
button (1) (RADIO, MEDIA, TEL). To navigate
through the source menus, use the controlsTUNE, OK/MENU, EXIT or the main
source button (1).
Source menu - for menu navigation
(accessed by pressing OK/MENU).
FAV - store a preset
NOTE
If the car is equipped with a steering wheel
keypad with a thumbwheel*, these can be
used instead of the controls in the centre
console (TUNE, OK/MENU, EXIT), see
page 241.
Main source button - press to switch the
main source or to show the Shortcut/Source
menu in the active source.
Normal view - normal mode for the source.
Shortcut/Source menu - shows commonly used menu options in the main sources,
e.g. TEL and MEDIA (accessed by pressing
the active source's main source button (1)).
Quick menu - fast mode when TUNE is
turned, e.g. for changing disc tracks, radio station, etc.
244
AUX
TV*
To store a function in the FAV button:
1. Select a main source (e.g. RADIO,
MEDIA).
2. Select a wavelength or source (AM, Disc,
etc.).
Menus and views in the TV screen
06
iPod*
Bluetooth*
It is also possible to select and store a favourite
for MY CAR, CAM* and NAV*. Favourites can
also be selected and stored under MY CAR.
For more information on the menu system MY
CAR, see page 203.
For Menu overview, see page 246.
The appearance depends on the source,
equipment in the car, settings, etc.
•
•
•
•
The FAV button can be used to store functions
that are used frequently so that the function
can be started simply by pressing FAV. You
can select a favourite (e.g. Equalizer) for each
function as follows:
In RADIO mode:
• AM
• FM1/FM2
• DAB1*/DAB2*
In MEDIA mode:
• DISC
• USB*
* Option/accessory, for more information, see Introduction.
3. Press and hold the FAV button until the
"favourites menu" is shown.
4. Turn TUNE to select an option from the list
and press OK/MENU to save.
> When the main source (e.g. RADIO,
MEDIA) is active the stored function is
available via a short press on FAV.
06 Infotainment system
General information on infotainment
General audio settings
Press SOUND to access the audio settings
menu (Bass, Treble, etc.). Scroll forward with
SOUND or OK/MENU to your selection (e.g.
Treble).
• Subwoofer*7 - Bass speaker level.
• DPL II centre level3 channel centre
level7 - Volume for centre speaker.
• DPL II surround level7, 8 – Level for surround.
Adjust the setting by turning TUNE and save
the setting with OK/MENU.
Advanced audio settings
Continue pressing SOUND or OK/MENU to
access other options:
Equalizer9
• Surround7 - Can be set to the On/Off position. When On is selected, the system
selects the setting for optimal sound reproduction. Normally DPLII and
then
appear in the TV screen. If the recording is
made with Dolby Digital technology then
playback will take place with this setting,
then appears in the TV screen.
When Off is selected, 3-channel stereo is
available.
• Bass - Bass level.
• Treble - Treble level.
• Fader – Balance between the front and
rear speakers.
• Balance – Balance between the left and
right-hand speakers.
7
8
9
Sound stage7
The volume level can be adjusted separately
for different wavelengths.
1. Press OK/MENU to access Audio
settings and select Equalizer.
The sound experience can be optimised for the
driver's seat, both front seats or the rear seat.
If there are passengers in both the front and
rear seats then the option recommended is;
both front seats. The options can be selected
under Audio settings Sound stage.
For general information on menu navigation,
see page 243 and menu overview, see
page 246.
Audio volume and automatic volume
control
3. Adjust the audio settings by turning
TUNE and confirm with OK/MENU. Continue in the same way with other wavelengths you want to change.
The audio system compensates for disrupting
noises in the passenger compartment by
increasing the volume in relation to the speed
of the car. The compensation level can be set
to low, medium, high or off. Select the level
under Audio settings Volume
compensation.
4. When you have finished with audio settings, press EXIT to confirm and return to
normal view.
For general information on menu navigation,
see page 243 and menu overview, see
page 246.
For general information on menu navigation,
see page 243 and menu overview, see
page 246.
If an external audio source (e.g. an MP3 player
or iPodŸ) is connected to the AUX input then
2. Select wavelength by turning TUNE and
confirm with OK/MENU.
06
External audio source audio volume
Only Premium Sound Multimedia.
Only when Surround is activated.
Not Performance.
``
* Option/accessory, for more information, see Introduction.
245
06 Infotainment system
General information on infotainment
the audio source that is connected can have a
different volume than the audio system's internal volume (e.g. radio). Correct this by adjusting the volume of the input:
Optimum sound reproduction
Menu overview
The audio system is pre-calibrated for optimum sound reproduction by means of digital
signal processing.
Menus RADIO
1. Press the MEDIA button and turn TUNE to
AUX and wait a few seconds or press OK/
MENU.
This calibration takes into account loudspeakers, amplifiers, passenger compartment
acoustics, listener position etc. for each combination of car model and audio system.
2. Press OK/MENU and then turn TUNE to
AUX input volume. Confirm with OK/
MENU.
3. Turn TUNE to adjust the volume for the
AUX input.
NOTE
06
If the external audio source's volume is too
high or too low, the quality of the sound may
deteriorate. The audio quality may also be
impaired if the player is charged while the
infotainment system is in AUX mode. In
which case, avoid charging the player via
the 12 V socket.
There is a also a dynamic calibration that takes
into account the position of the volume control,
radio reception and vehicle speed.
The controls explained in these operating
instructions, e.g. Bass, Treble and Equalizer,
are only intended for the user to be able to
adapt the sound reproduction according to
personal taste.
Main menu AM
AM menu
Show presets10
Scan
Audio settings11
Sound stage12
Equalizer13
Volume compensation
Reset all audio settings
Main menu FM1/FM2
FM menu
TP
Show radio text
Show presets10
Scan
News settings
10 Only applies to High Performance Multimedia and Premium Sound Multimedia.
11 The menu options for audio settings are the same for all audio sources.
12 Only applies to Premium Sound Multimedia.
13 Does not apply to Performance.
246
06 Infotainment system
General information on infotainment
Advanced settings
REG
Alternative frequency
Show PTY text
Main menu DVD10 Video
Reset all DAB settings
DVD Video Menu
Audio settings14
Play/Pause/Continue
EON
Set TP favourite
PTY settings
Reset all FM settings
Audio settings14
Menus MEDIA
Stop
Main menu CD Audio
Subtitles
Disc menu
Audio tracks
Random
Main menu CD/DVD10 Data
Ensemble learn
Disc menu
PTY filtering
Turn off PTY filtering
Show
Scan
Advanced settings
DAB linking
DAB band
Sub channels
14 For submenus, see "Main menu AM".
10 Only applies to High Performance Multimedia
13 Does not apply to Performance.
Angle
Audio settings14
DAB menu
presets10
Advanced settings
Scan
Main menu DAB1*/DAB2*
Show radio text
DVD disc menu
Play/Pause
DivX® VOD code
Audio settings14
Main menu iPod13
iPod menu
Stop
Random
Random
Scan
Repeat folder
Audio settings14
06
Change subtitles
Change audio track
Scan
Audio settings14
Main menu USB13
USB menu
Play/Pause
and Premium Sound Multimedia.
``
* Option/accessory, for more information, see Introduction.
247
06 Infotainment system
General information on infotainment
Stop
Main menu AUX
Random
AUX menu
Repeat folder
AUX input volume
Select USB device
Audio settings14
Change subtitles
Change audio track
All calls
TV menu
Missed calls
settings14
Select country
Answered calls
Reorganise presets
Dialled calls
Autostore
Call duration
Scan
Bluetooth menu
Phone book
Audio settings14
Random
Change device
Pop-up menu15 video and TV*
Remove Bluetooth device
Press OK/MENU when a video file is being
played back or TV* is being shown in order to
access the pop-up menu.
Scan
Phone menu
All calls
Main menu Media Bluetooth13
06
Main menu BluetoothŸ handsfree13
Main menu TV*
Scan
Audio
Menus TEL
Bluetooth software version in car
Image settings
Audio settings14
Source
menu16
DVD disc
menu17
Search
New contact
Speed dials
Receive vCard
Memory status
Clear phone book
Change phone
Remove Bluetooth device
DVD disc TOP menu17
14 For submenus, see "Main menu AM".
13 Does not apply to Performance.
15 Only applies when playing back videos or displaying TV*.
16 What is shown in the pop-up menu for the source menu depends
17 Only applies to DVD video discs.
248
on what is being played back or displayed, it can be e.g. CD/DVD data menu or USB menu.
* Option/accessory, for more information, see Introduction.
06 Infotainment system
General information on infotainment
Phone settings
Discoverable
Sounds and volume
Download phone book
Bluetooth software version in
car
Call options
Auto answer
Voicemail number
Disconnect phone
06
249
06 Infotainment system
Radio
General
NOTE
If the car is equipped with a steering wheel
keypad* and/or remote control* then in
many cases these can be used instead of
the buttons in the centre console. For a
description of the buttons in the steering
wheel, see page 241. For a description of
the remote control, see page 282.
Station list1
The radio automatically compiles a list of the
strongest FM stations whose signals it is currently receiving. This enables you to find a station when you drive into an area where you do
not know the radio stations and their frequencies.
Station presets (0-9)
Radio AM/FM
To go to the list and select a station:
Confirm your selection or go to the radio
menu by pressing OK/MENU.
Tuning
1. Select the desired wavelength (FM1 or
FM2).
Select the desired frequency/station or
navigate in the radio menu by turning
TUNE.
Hold in the button for next/previous available station. Short press for preset.
250
2. Hold in
/
in the centre console (or
in the steering wheel keypad*). The radio
searches for the next/previous available
station.
The menus inRADIO are controlled from the
centre console and the steering wheel keypad*. For general information on menu navigation, see page 243 and menu overview, see
page 246.
RADIO button for selecting the wavelength
(AM, FM1, FM2, DAB1*, DAB2*).
1
1. Press RADIO, turn TUNE until the desired
wavelength (AM, FM1 etc.) is shown, press
OK/MENU.
Menus
Centre console, controls for radio functions.
06
Automatic tuning
NOTE
The reception is dependent both on how
good the signal strength and signal quality
are. The transmission may be disturbed by
various factors such as tall buildings or the
transmitter being far away. Coverage level
can also vary depending on where in the
country you are located.
Does not apply to Performance.
* Option/accessory, for more information, see Introduction.
2. Turn TUNE one step in either direction.
This displays the list of all stations in the
area. The currently tuned station is indicated with enlarged text in the list.
3. Turn TUNE again in either direction to
select a station from the list.
4. Confirm your choice by pressing OK/
MENU.
06 Infotainment system
Radio
NOTE
•
The list only shows the frequencies of
stations that are currently being
received, not a complete list of all radio
frequencies on the selected wavelength.
•
If the signal from the currently received
station is weak, this may prevent the
radio from updating the station list. If
button
this occurs, press the
(while the station list is shown in the display screen) in order to change to manual tuning and set a frequency. If the
station list is no longer shown, turn
TUNE one step in either direction to
to
show the list again, and press
switch.
in the area when you turn TUNE (see the section "Station list", page 250). When the station
list is shown, press the
button in the centre console to change to manual tuning. This
allows you to select a frequency from the list of
all available radio frequencies in the selected
wavelength. In other words, if turn TUNE one
step in a manual search the frequency is
changed from e.g. 93.3 to 93.4 MHz, etc.
To manually select a station:
1. Press the RADIO button, turn TUNE until
the required frequency band (AM, FM1
etc.) is displayed, press OK/MENU.
2. Turn TUNE to select a frequency.
NOTE
The preset from the factory is that the radio
automatically searches for the stations in
the area where you are driving (see previous
section "Station list" above).
But if you have changed over to manual tuning (by pressing the
button in the centre console when the station list was
shown), then the radio remains set in the
function for manual tuning the next time you
switch on the radio. To change back to the
function for "Station list", turn TUNE one
step (to show the complete list of stations)
and press the button
.
Note that if you press
when the station list is not shown then INFO is activated.
For more information on this function, see
page 241.
The list disappears from the TV screen after a
few seconds.
Preset
If the station list is no longer shown, turn
TUNE one step in either direction and press the
button in the centre console to change
to manual tuning (or to return from manual tuning to the function for "Station list").
The stored presets are selected using the preset buttons.
Manual tuning
The preset from the factory is that the radio
shows the station list of the strongest stations
06
10 presets can be stored per wavelength (AM,
FM1 etc.).
1. Tune into a station (see "Tuning", page
250).
2. Hold in one of the preset buttons for a few
seconds, the sound disappears during this
251
06 Infotainment system
Radio
time and returns when the station is stored.
The preset button can now be used.
A list of pre-selected channels can be shown2
in the TV screen. The function is activated/
deactivated in FM/AM mode under FM menu
Show presets or AM menu Show
presets.
RDS functions
RDS (Radio Data System) links FM transmitters
into a network. An FM transmitter in such a
network sends information that gives an RDS
radio the following functions:
• Automatically switches to a stronger transmitter if reception in the area is poor.
• Searches for programme type, such as
•
06
Alarm
Receives text information on current radio
programme.
This function is used to warn of serious accidents and catastrophes. The alarm cannot be
temporarily interrupted or deactivated. The
message ALARM! appears on the TV screen
when an alarm message is transmitted.
NOTE
If a required programme type is located the
radio can switch stations interrupting the audio
source currently in use. For example, if the CD
252
The programme functions alarm (ALARM!),
traffic information (TP), news (NEWS), and programme types (PTY) interrupt one another in
order of priority, where alarm has the highest
priority and programme types has the lowest.
For additional settings of programming interruptions (EON Distant and EON Local), see
the section "Enhanced Other Networks –
EON" below. Press EXIT to return to the interrupted audio source, press the OK/MENU to
clear the message.
traffic information or news.
Some radio stations do not use RDS or only
selected parts of its functionality.
2
3
player is in use, it is paused. The interrupting
transmission is played at a preset volume, see
page 254. The radio returns to the previous
audio source and volume when the set programme type is no longer broadcast.
Traffic information – TP
This function allows traffic information sent
within a set station's RDS network to break
through. The TP symbol indicates that the
function is activated. If the preset station can
Only applies to High Performance Multimedia and Premium Sound Multimedia.
Factory settings.
send traffic information then this is shown by
TP glowing brightly in the TV screen, otherwise
TP will be grey.
–
Activate/deactivate in FM mode under FM
menu TP.
Enhanced Other Networks – EON
This function is useful in urban areas with many
regional radio stations. It allows the distance
between the car and the radio station transmitter to determine when programme functions
should interrupt the current audio source.
–
Activate/deactivate in FM mode by selecting one of the options under FM menu
Advanced settings EON:
• Local – interrupts only if the radio station
transmitter is close.
• Distant3 – interrupts if the station transmitter is far away, even if there is a lot of
static.
TP from selected station/all stations
The radio can only interrupt for traffic information from the selected station or all stations
within the RDS network.
–
Go in FM mode to FM menu Advanced
settings Set TP favourite to change.
06 Infotainment system
Radio
News
This function allows news broadcasts sent
within a set station's RDS network to break
through. The NEWS symbol indicates that the
function is active.
–
Activate/deactivate in FM mode under FM
menu News settings News.
News from selected station/all stations
The radio can only interrupt for news from the
selected station or all stations in the RDS network.
–
Go in FM mode to FM menu News
settings Set news favourite to change.
Programme types – PTY
The PTY function can be used to select one or
more programme types, such as pop music
and serious classic. The PTY symbol indicates
that the function is active. This function allows
programme types broadcast within a set station's RDS network to break through.
1. Activate in FM mode by first selecting the
programme types under FM menu
Advanced settings PTY settings
Select PTY.
4
2. Then the PTY function must be activated
under FM menu Advanced settings
PTY settings Receive traffic
bulletins from other networks.
–
To continue searching for another broadcast of the selected programme types,
press on
or
.
Display of programme type
An indicator is shown in the TV screen when
PTY is activated.
The programme type of the current station can
be shown on the TV screen.
Deactivation of the PTY function is performed
in FM mode under FM menu Advanced
settings PTY settings Receive traffic
bulletins from other networks. Selected programme types (PTY) are not reset.
–
Resetting and removing PTY are performed
under FM menu Advanced settings
PTY settings Select PTY Clear all.
Activate/deactivate in FM mode under FM
menu Advanced settings PTY
settings Show PTY text.
Radio text4
Some RDS stations transmit information on
programme content, artists, etc. This information can be shown on the TV screen.
–
PTY search
Activate/deactivate in FM mode under FM
menu Show radio text.
This function searches the entire wavelength
for the selected programme type.
Automatic frequency update – AF
1. In FM mode select one or more PTY under
FM menu Advanced settings PTY
settings Select PTY.
The function selects the strongest transmitter
for the set station. In order to find a strong
transmitter the function may, in exceptional
cases, need to search the entire FM wavelength.
2. Go to FM menu Advanced settings
PTY settings Seek PTY.
To finish searching, press EXIT.
–
06
Activate/deactivate in FM mode under FM
menu Advanced settings
Alternative frequency.
Only cars with 7-inch screen
``
253
06 Infotainment system
Radio
Regional radio programmes – REG
This function causes the radio to continue with
a regional transmitter even if its signal strength
is low. The symbol REG shows that the function is active.
–
–
To start scanning go in FM/AM mode to
FM menu Scan or AM menu Scan.
NOTE
Scanning stops if a station is saved.
Activate/deactivate in FM mode under FM
menu Advanced settings REG.
Radio system - DAB*
Resetting RDS functions
All radio settings can be reset to the original
factory settings.
–
The reset is carried out in FM mode under
FM menu Advanced settings
Reset all FM settings.
Volume control, programme types
06
The interrupting programme types, e.g.
NEWS or TP, are heard at the volume selected
for each respective programme type. If the volume level is adjusted during the programme
interruption, the new level is saved until the
next programme interruption.
General
DAB (Digital Audio Broadcasting) is a digital
broadcasting system for radio. This system
supports DAB, DAB+ and DMB.
NOTE
Coverage for DAB is not available in all locations. If there is no coverage then the message No reception is shown in the display
screen.
Service and Ensemble
• Service - Channel, radio channel (only
audio services are supported by the system).
Scan wavelength
The function automatically searches for available channels and takes into account any programme type filtering. When a station is found,
it is played for approx. 10 seconds before
scanning is resumed. When a station is playing
back it can be saved as a preset in the usual
way, see the section Preset, page 251.
254
• Ensemble - A collection of radio channels
on the same frequency.
Storing channel groups (Ensemble learn)
When the vehicle is moved to a new broadcasting area, programming of existing channel
groups in the area may be necessary.
* Option/accessory, for more information, see Introduction.
Programming of channel groups creates an
updated list of all available channel groups.
The list is not updated automatically.
Programming is carried out in the menu system
in DAB mode under DAB menu Ensemble
learn. Programming can also take place as follows:
1. Turn TUNE one step in either direction.
> Ensemble learn is shown in the list of
available channel groups.
2. Press OK/MENU.
> New programming is started.
Programming can be cancelled with EXIT.
Navigation in channel group list
(Ensemble)
To navigate in and access the channel group
list turn TUNE. The name of the Ensemble is
shown in the upper part of the TV screen. When
switching to the new Ensemble the name
changes to the new one.
• Service - Shows channels irrespective of
the channel group to which they are allocated. The list can also be filtered using the
selection of programme type (PTY
filtering), see below.
06 Infotainment system
Radio
Scanning
The function automatically searches the current wavelength for strong stations. When a
station is found, it is played for approx. 10 seconds before scanning is resumed. When a station is playing back it is saved as a preset in the
usual way. For more information on presets,
see "Preset" below.
–
Go in DAB mode to DAB menu
start scanning.
Scan to
Programme type is selected in DAB mode
under DAB menu PTY filtering. Exit this
mode as follows:
–
Press EXIT.
> An indicator is shown in the TV screen
when PTY is activated.
In certain cases DAB radio will exit PTY mode
when DAB to DAB linking (see below) is implemented.
Scanning stops if a station is saved.
Scanning can also be selected in DAB-PTY
mode. In which case only channels of the preselected programme type are played.
Programme type (PTY)
Various types of radio programmes can be
selected using the programme type function.
There are a number of different programme
types which also include different programme
categories. After selecting a programme type,
navigation only takes place within the channels
that are broadcasting that type.
5
NOTE
The audio system's DAB system does not
support all functions in the DAB standard.
Radio text
Preset
NOTE
A list of pre-selected channels can be shown5
in the TV screen. The function is activated/
deactivated in DAB mode under DAB menu
Show presets.
10 station presets can be stored per wavelength. DAB has 2 memories for presets:
DAB1 and DAB2. Storage of presets is made
by means of a long press on the desired preset
button, for more information see page 251. The
stored presets are selected using the preset
buttons.
A preset contains one channel but no subchannels. If a subchannel is being played and
a preset is saved then only the main channel is
registered. This is because subchannels are
temporary. At the next attempt to retrieve the
preset, the channel which contained the subchannel will be played. The preset is not
dependent on the channel list.
Some radio stations transmit information on
programme content, artists, etc. This information is shown on the TV screen.
The function is deactivated/activated in DAB
mode under DAB menu Show radio text.
NOTE
Only one of the functions "Show radio
text" and "Show presets" can be activated at a time. If one of them is activated
when the other is already activated, then the
previously activated function is deactivated
automatically. Both functions can be deactivated.
06
Only applies to High Performance Multimedia and Premium Sound Multimedia
255
06 Infotainment system
Radio
Advanced settings
Subchannel
Resetting the DAB settings
DAB to DAB link
Secondary components are usually named
subchannels. These are temporary and can
contain e.g. translations of the main programme into other languages.
All DAB settings can be reset to the original
factory settings.
DAB to DAB linking means that the DAB radio
can go from one channel with poor or no reception to the same channel in another channel
group with better reception. There may be a
certain delay when changing channel group.
There may be a period of silence between the
current channel no longer being available to the
new channel becoming available.
The function can be activated/deactivated in
DAB mode under DAB menu Advanced
settings DAB linking.
Wavelength
DAB can be transmitted on two6 wavelengths:
• Band III - covers most areas.
• LBand - available only in a few areas.
06
Press
to access the subchannels.
Subchannels can only be accessed on the
selected main channel and not on any other
channel without selecting it.
Display of subchannels can be deactivated/
activated in DAB mode under DAB menu
Advanced settings Sub channels
By selecting for example Band III on its own,
channel programming takes place more
quickly than if both Band III and LBand have
been selected. It is not certain that all channel
groups will be found. Wavelength selection
does not affect the stored memories.
Programme type text
Wavelengths can be deactivated/activated in
DAB mode under DAB menu Advanced
settings DAB band.
The function is activated/deactivated in DAB
mode under DAB menu Advanced
settings Show PTY text.
6
256
If one or more subchannels are broadcast then
symbol is shown to the left of the chanthe
nel name in the TV screen. A subchannel is
indicated by the - symbol appearing to the left
of the channel name in the TV screen.
Not all areas/countries use both wavelengths.
Some radio stations broadcast information
about programme type and programme category, for information on Programme types –
PTY, see page 253. This information is shown
on the TV screen.
–
The reset is carried out in DAB mode under
DAB menu Advanced settings
Reset all DAB settings.
06 Infotainment system
Media player
CD/DVD1 functions
Select the disc tracks/folders, or navigate
through menu options by turning TUNE.
Fast forward/reverse and change disc
track or chapter2.
The media player supports and can play the
following main types of discs and files:
• Pre-recorded CD discs (CD Audio).
• Burned CD discs with audio and/or video
files1.
• Pre-recorded DVD video discs1.
• Burned DVD discs1 with audio and/or video
Centre console control panel.
Disc insert and eject slot
files.
For more information about the supported formats, see page 260.
Disc eject
MEDIA button, activates last active media
source. If you are already in a media source
and press the MEDIA button then a shortcut menu is shown for commonly used
menu options.
Input of numbers and letters.
Confirm your selection or go to the menu
for the selected media source by pressing
OK/MENU.
1
2
NOTE
If the car is equipped with a steering wheel
keypad* and/or remote control* then in
many cases these can be used instead of
the buttons in the centre console. For a
description of the buttons in the steering
wheel, see page 241. For a description of
the remote control, see page 282.
Menus
The menus inMEDIA are controlled from the
centre console and the steering wheel key-
pad*. For general information on menu navigation, see page 243 and menu overview, see
page 246.
Starting playback of a disc
Press the MEDIA button, turn TUNE until
Disc is displayed, press OK/MENU. If there is
a disc in the media player then the disc starts
playing back automatically, otherwise Insert
disc is shown in the TV screen. Then insert a
disc, with text side up. The disc starts to play
back automatically.
If a disc with audio/video files is inserted into
the player then the disc's folder structure
needs to be loaded. Depending on the quality
of the disc and the quantity of information there
may be a certain delay before playback starts.
Disc eject
A disc remains in the ejected position for
about 12 seconds, after which it is inserted
back into the player for safety reasons.
06
Pause
When the volume is reduced entirely or MUTE
is pressed, the media player is paused. When
the volume is increased or MUTE is pressed
again, the media player starts. It is also possi-
Only applies to High Performance Multimedia and Premium Sound Multimedia.
Only applies to DVD discs.
* Option/accessory, for more information, see Introduction.
257
06 Infotainment system
Media player
ble to pause via the menu system3, press OK/
MENU, select Play/Pause.
Playback and navigation
CD audio discs
Turn TUNE to access the disc's playlist and
navigate in the list. Use OK/MENU to confirm
the selection of the disc track and start playback. Press EXIT to cancel and exit the playlist.
A long press on EXIT leads to the playlist's root
level.
Disc tracks can also be changed by pressing
on
/
on the centre console or the
steering wheel keypad*.
Burned discs audio/video files1
06
Turn TUNE to access the disc's playlist/folder
structure and navigate in the list/structure. Use
OK/MENU to confirm either selection of subfolder or start of playback of the selected
audio/video file. Press EXIT to either stop and
exit the playlist or go up (back) in the folder
structure. A long press on EXIT leads to the
playlist's root level.
Audio files have the symbol
, video files1
have the symbol
and folders have the
.
symbol
When playback of a file is complete the playback of the other files (of the same type) in that
particular folder continues. Change4 of folder
takes place automatically when all the files in
the current folder have been played back. The
system automatically detects and changes
setting when a disc containing only audio files
or only video files is loaded into the media
player and then plays back these files. However, the system does not change setting if a
disc containing a mixture of audio and video
files is loaded into the media player, but instead
the player continues to play back the previous
file type.
Audio/video files can also be changed by
/
on the centre console or the
pressing
steering wheel keypad*.
3
1
4
258
Does not apply to CD Audio
Only applies to High Performance Multimedia and Premium Sound Multimedia.
If Repeat folder is activated then this does not take place.
* Option/accessory, for more information, see Introduction.
NOTE
A video film is only shown when the car is
stationary. When the car is moving at a
speed of over about 8 km/h no picture is
shown and No visual media available
while driving appears on the display
screen, although the audio is heard during
this time. The picture is shown again as
soon as the car's speed falls below about 6
km/h.
NOTE
Some audio files that are copy-protected by
record companies or privately copied audio
files cannot be loaded by the player.
DVD video discs1
For playback of DVD video discs, see
page 259.
Fast forward/reverse
Hold in the buttons
/
to fast forward/
rewind. Audio files are fast forwarded/rewound
at one speed, while video files are fast forwarded/rewound at several speeds. Repeatedly
/
to increase the fast
press the buttons
06 Infotainment system
Media player
forward/rewind speed for video files. Release
the button to return to viewing at normal speed.
Scan5
This function plays the first ten seconds of
each disc track/audio file. To scan:
1. Press OK/MENU
2. Turn TUNE to Scan
> The first 10 seconds of each disc track
or audio file are played.
3. Cancel the scan with EXIT, the disc track
or audio file being played back will continue playing.
Random5
This function plays the tracks in random order.
To listen to the tracks in random order:
Repeat folder6
NOTE
This function makes it possible to play files in
a folder over and over again. When the last file
has been played out, playback of the first file
starts again.
1. Press OK/MENU
2. Turn TUNE to Repeat folder
3. Press OK/MENU to activate/deactivate
the function.
Playback of DVD video discs1
A video film is only shown when the car is
stationary. When the car is moving at a
speed of over about 8 km/h no picture is
shown and No visual media available
while driving appears on the display
screen, although the audio is heard during
this time. The picture is shown again as
soon as the car's speed falls below about 6
km/h.
Navigation in the DVD video disc's menu
Playback
When playing back a DVD video disc a disc
menu may appear on the display screen. The
disc menu gives access to additional functions
and settings, such as selecting subtitles, language and scene selection.
1. Press OK/MENU
06
2. Turn TUNE to Random
3. Press OK/MENU to activate/deactivate
the function.
Disc tracks/audio files can be changed by
/
on the centre console or the
pressing
steering wheel keypad*.
5
6
1
Navigation in the DVD video disc's menu is
performed using the number keys in the centre
console as illustrated above.
Does not apply to DVD video discs.
Only applies to audio/video files on burned discs or USB.
Only applies to High Performance Multimedia and Premium Sound Multimedia.
* Option/accessory, for more information, see Introduction.
259
06 Infotainment system
Media player
Changing chapter or title
DivXŸ Video On Demand
Compatible file formats
Turn TUNE to access the list of chapters and
navigate through them (if the film is being
played back then it is paused). Press OK/
MENU to select the chapter, this also leads
back to the original position (if the film was
being played back then it is restarted). Press
EXIT to access the title list.
The media player can be registered in order to
play DivX VOD type files from burned discs or
USB. The code for registration can be found in
the menu system MY CAR Settings
Information DivX® VOD code. For general
information on menus, see under MY CAR, see
page 203.
The media player can play back a variety of file
types and is compatible with the formats in the
following table.
Titles are selected in the title list by turning
TUNE and the selection is confirmed with OK/
MENU, this also leads back to the chapter list.
Press OK/MENU to activate the selection and
return to the start position. Use EXIT to cancel
the selection and this leads back to the original
position (without any selection being made).
The chapter can also be changed by pressing
/
on the centre console or the
on
steering wheel keypad*.
06
Advanced settings7
Angle
If the DVD video disc supports it, the function
can be used to choose from which camera
position a particular scene should be shown.
Go in disc mode to Disc menu Advanced
settings Angle.
7
260
NOTE
Dual format, double-sided discs (DVD Plus,
CD-DVD format) are thicker than regular CD
discs and therefore playback cannot be
guaranteed and malfunction may arise.
For more information visit www.divx.com/vod.
Picture settings7
If a CD contains a mixture of MP3 and CDDA
tracks, all MP3s will be ignored.
You can adjust the settings (when the car is
stationary) for brightness and contrast.
1. Press OK/MENU and select Image
settings, confirm with OK/MENU.
Audio formatA
CD audio, mp3,
wma
2. Turn TUNE to the adjustment option and
confirm with OK/MENU.
Audio formatB
CD audio, mp3,
wma, aac, m4a
3. Adjust the setting by turning TUNE and
confirm with OK/MENU.
Video formatC
CD video,
DVD video, divx, avi,
asf
To return to the settings list, press the OK/
MENU or EXIT.
The picture settings can be reset to factory
settings with the Reset option.
Applies to High Performance Multimedia and Premium Sound Multimedia.
* Option/accessory, for more information, see Introduction.
A
B
C
Applies to Performance.
Does not apply to Performance.
Only applies to High Performance Multimedia and Premium
Sound Multimedia.
06 Infotainment system
External audio source via AUX/USB* input
General
NOTE
If the car is equipped with a steering wheel
keypad* and/or remote control* then in
many cases these can be used instead of
the buttons in the centre console. For a
description of the buttons in the steering
wheel, see page 241. For a description of
the remote control, see page 282.
structure and number of files there may be
some delay before loading is finished.
NOTE
The system supports most iPodŸ models
produced in 2005 or later.
NOTE
An iPodŸ or MP3 player with rechargeable batteries is recharged (when the ignition is on or
the engine is running) if the device is plugged
into the USB connection.
Connection points for external audio sources.
An external audio source, e.g. an iPodŸ or MP3
player, can be connected to the audio system
via any of the connections in the centre console. An audio source connected to the USB
input can then be handled1 with the car's audio
controls. A device connected via the AUX input
cannot be controlled via the car.
There is a recess in the right-hand rear edge of
the tunnel console where cables can be routed
so that the hatch can be closed without cables
being pinched.
1
To connect the audio source:
1. Press MEDIA, turn TUNE to the required
sound source USB, iPod or AUX, press
OK/MENU.
> If USB is selected then Connect USB is
shown in the TV screen.
2. Connect your audio source to one of the
connections in the centre console's storage compartment (see previous illustration).
To prevent damage to the USB connection,
this is shut off if the USB connection is
short-circuited or if a connected USB unit is
taking too much power (this may happen if
the unit connected does not meet the USB
standard). The USB connection is reactivated automatically the next time the ignition
is turned on, unless the fault persists.
Menus
The menus inMEDIA are controlled from the
centre console and the steering wheel keypad*. For general information on menu navigation, see page 243 and menu overview, see
page 246.
06
The text Reading USB is shown in the TV
screen when the system is loading the storage
media's file structure. Depending on the file
Only applies to the media source connected via the USB connection.
* Option/accessory, for more information, see Introduction.
261
06 Infotainment system
External audio source via AUX/USB* input
Playback and navigation2
Turn TUNE to access the playlist/folder structure and navigate in the list/structure. Use OK/
MENU to either confirm selection of subfolder
or start of playback of the selected audio/video
file. Press EXIT to either stop and exit the playlist or go up (back) in the folder structure. A long
press on EXIT leads to the playlist's root level.
Audio/video files can also be changed by
/
on the centre console or the
pressing
steering wheel keypad*.
Audio files have the symbol
, video files3
have the symbol
and folders have the
.
symbol
06
When playback of a file is complete the playback of the other files (of the same type) in that
particular folder continues. Change4 of folder
takes place automatically when all the files in
the current folder have been played back. The
system automatically detects and changes
setting when a device containing only audio
files or only video files is connected to the USB
port and then it plays back these files. However, the system does not change setting if a
2
3
4
5
6
262
device containing a mixture of audio and video
files is connected to the USB port, but instead
the player continues to play back the previous
file type.
Fast forward/reverse2
See page 258.
Scan2
See page 259.
Repeat folder5
See page 259.
Pause
When the volume is reduced entirely or MUTE
is pressed, the media player is paused. When
the volume is increased or MUTE is pressed
again, the media player starts. It is also possible to pause via the menu system6, press OK/
MENU, select Play/Pause.
Random2
See page 259.
Audio sources
Search function2
USB memory
The keypad on the control panel in the centre
console can be used to find a filename in the
current folder.
To facilitate the use of a USB memory stick,
only store music files on it. It takes a lot longer
for the system to load storage media that contains anything other than compatible music
files.
The search function is accessed either by turning TUNE (to access the folder structure) or by
pressing one of the letter keys. As a letter or
character in a search string is entered you get
closer to your search target.
Start playback of a file by pressing OK/
MENU.
Only applies to USB and iPodŸ.
Applies to High Performance Multimedia and Premium Sound Multimedia.
If Repeat folder is activated then this does not take place.
Only applies to USB.
Does not apply to iPodŸ
* Option/accessory, for more information, see Introduction.
06 Infotainment system
External audio source via AUX/USB* input
NOTE
The system supports mobile media compliant with USB 2.0 and the FAT32 file system
and can handle 1000 folders with a maximum of 254 subfolders/files in every folder.
The top level, which can handle up to 1000
subfolders/files, is an exception to this.
iPodŸ
An iPodŸ is charged and supplied with power
by the USB connection* via the player's connection cable.
NOTE
The system only supports the playback of
audio files from iPodŸ.
NOTE
When using a longer model USB memory
stick the use of a USB adapter cable is recommended. This is to avoid mechanical
wear to the USB input and the connected
USB memory stick.
NOTE
When an iPodŸ is used as audio source, the
car's infotainment system has a menu
structure that is similar to the iPodŸ player's
own menu structure.
USB hub
It is possible to connect a USB hub to the USB
connection and thereby connect multiple USB
devices simultaneously. Selection of USB
device is made in USB mode under USB menu
Select USB device.
Compatible file formats via the USB
connection
Audio and video files in the following table are
supported by the system for playback via the
USB connection.
06
MP3 player
Many MP3 players have their own file systems
that are not supported by the audio system. For
use in the system, an MP3 player must be set
in USB Removable device/Mass Storage
Device mode.
Audio format
Video
A
formatA
mp3, wma, aac, m4a
divx, avi, asf
Only applies to High Performance Multimedia and Premium
Sound Multimedia.
* Option/accessory, for more information, see Introduction.
263
06 Infotainment system
Media BluetoothŸ*
General
The car's media player is equipped with
BluetoothŸ1 and can wirelessly play streaming
audio files from external devices with
BluetoothŸ, such as mobile phones and PDAs.
Navigation and control of the sound can be
carried out via the centre console buttons or via
the steering wheel keypad*. In some external
devices it is also possible to change tracks
from the device.
To play back the audio the car's media player
must first be set in Bluetooth mode.
NOTE
The car's media player can only play the
audio files via the BluetoothŸ function.
Menus
The menus inMEDIA are controlled from the
centre console and the steering wheel keypad*. For general information on menu navigation, see page 243 and menu overview, see
page 246.
264
EXIT - leads up in the menu system, stops
the function in progress.
Short presses are used to scroll between
audio files. Long presses are used to fast
forward and rewind audio files.
If the car is equipped with a steering wheel
keypad* and/or remote control* then in
many cases these can be used instead of
the buttons in the centre console. For a
description of the buttons in the steering
wheel, see page 241. For a description of
the remote control, see page 282.
Centre console control panel.
VOL – volume.
MEDIA button. Last active source (e.g.
iPodŸ) is activated automatically. If a
1
Navigate in the menu by turning TUNE.
NOTE
The BluetoothŸ media player must support
the Audio/Video Remote Control Profile
(AVRCP) and Advanced Audio Distribution
Profile (A2DP). The player should use
AVRCP version 1.3, A2DP 1.2. Otherwise
some functions may not work.
Not all mobile phones and external media
players available in the market are fully compatible with the BluetoothŸ function in the
car's media player. Volvo recommends that
you contact an authorised Volvo dealer or
visit www.volvocars.com for information on
compatible phones and external media
players.
Confirm your selection or go to the menu
by pressing OK/MENU.
Overview
NOTE
06
source is activated and you press MEDIA
then a shortcut menu is shown with commonly used menu options.
Applies to High Performance, High Performance Multimedia and Premium Sound Multimedia.
* Option/accessory, for more information, see Introduction.
06 Infotainment system
Media BluetoothŸ*
Getting started
Connect an external BluetoothŸ device
A maximum of ten external devices can be registered. The connection is made in the same
way as for the phone, see Connect an external
Bluetooth® device, page 268.
Automatic connection
When the BluetoothŸ function is active and the
last external device connected is in range it is
connected automatically. When the infotainment system searches for the last device connected its name is shown in the TV screen. To
connect to another device, press EXIT. Connect a new external device, see "Change to
another external device" below.
2. Check that the external device is searchable/visible via BluetoothŸ, see the manual
for the external device.
3. Press OK/MENU.
4. Turn TUNE to Change device, and confirm with OK/MENU.
> After a while, the external device's name
is shown in the TV screen. If several
external devices have been paired then
these are also shown.
5. Select the device to be connected by turning TUNE and confirm with OK/MENU.
> Connection of the external device takes
place.
Change to another external device
/
on the
Change audio file by pressing
centre console or the steering wheel keypad*.
It is possible to change a connected device
with another device if there are several devices
in the car. However, the device must first have
been paired, see "Connect an external Bluetooth® device" above. To change to another
device:
Automatic disconnection takes place if the
external device moves out of the infotainment
system's range. For more information on connection, see page 265.
1. Press MEDIA, turn TUNE until Bluetooth
is displayed, press OK/MENU.
Disconnecting the device
Remove the connected device
1. Press Bluetooth mode on OK/MENU.
3. Select the device to be removed by turning
TUNE, and confirm with OK/MENU.
> A prompt asking whether or not you
want to remove the connection is shown
in the TV screen.
4. Press OK/MENU to confirm.
EXIT cancels.
Random2
This function plays back the audio files on the
external device in random order. Activate/
deactivate the random function in Bluetooth
mode under Bluetooth menu Random.
Change audio file by pressing
/
on the
centre console or the steering wheel keypad*.
Scanning of audio files in external
device2
06
This function play backs the first ten seconds
of each audio file. Activate/deactivate the function in Bluetooth mode under Bluetooth menu
Scan.
Cancel scanning with EXIT.
2. Turn TUNE to Remove Bluetooth
device and confirm with OK/MENU.
2
Not supported by all mobile phones.
``
* Option/accessory, for more information, see Introduction.
265
06 Infotainment system
Media BluetoothŸ*
Version information BluetoothŸ
The car's current BluetoothŸ version can be
seen in Bluetooth mode under Bluetooth
menu Bluetooth software version in car.
06
266
* Option/accessory, for more information, see Introduction.
06 Infotainment system
BluetoothŸ handsfree*
General
Overview
Phone functions, controls overview
System overview
Centre console control panel.
A mobile phone equipped with BluetoothŸ can
be connected wirelessly to the Infotainment
system1. The infotainment system then works
handsfree, with the option to control a range of
the mobile phone's functions remotely. The
microphone used is located by the driver's sun
visor (2). The mobile phone can be operated by
its own keys irrespective of whether or not it is
connected.
NOTE
Only a selection of mobile phones are fully
compatible with the handsfree function.
Volvo recommends that you seek assistance from an authorised Volvo dealer or
visit www.volvocars.com for information on
compatible phones.
Menus
Mobile phone.
Number and letter buttons
Microphone.
TEL button activates/searches last connected phone. If a phone is already connected, and TEL is pressed, a shortcut
menu is shown with commonly used menu
options for the phone.
Steering wheel keypad.
Centre console control panel.
The menus in TEL are controlled from the centre console and the steering wheel keypad*.
For general information on menu navigation,
see page 243 and menu overview, see
page 246.
1
06
Accept incoming calls, confirm your selection or go to the Phone menu by pressing
OK/MENU.
TUNE - Turn in normal view to the right to
access the phone book, and to the left for
the call register for all calls; also used for
Applies to High Performance, High Performance Multimedia and Premium Sound Multimedia.
* Option/accessory, for more information, see Introduction.
267
06 Infotainment system
BluetoothŸ handsfree*
navigation among the options on the TV
screen.
EXIT - Cancels/rejects phone calls, deletes
input characters, leads up in the menu system and cancels the current function.
NOTE
If the car is equipped with a steering wheel
keypad* and/or remote control* then in
many cases these can be used instead of
the buttons in the centre console. For a
description of the buttons in the steering
wheel, see page 241. For a description of
the remote control, see page 282.
Remember
It is possible to have two BluetoothŸ devices
connected simultaneously. One phone and
one media device, which it is possible to switch
between, see page 269 or see page 265. It is
also possible to use the phone while streaming
audio files from a connected device.
Connecting an external device takes place in
different ways depending on whether or not the
device has been connected previously. The
connection options below presume that this is
the first time the device is being connected and
that no other device is connected.
There are two possible ways of connecting
devices, either search for the external device
from the car, or search for the car from the
external device. If one option does not work
then try with the other.
Activate
06
1. Make the external device searchable/visible via BluetoothŸ, see the external device's manual or www.volvocars.com.
2. Press OK/MENU and follow the instructions on the TV screen.
> The external device is now connected to
the car and can be controlled from the
car.
If connection failed, press EXIT twice and connect the device as described under Alternative
2.
1. Make the car searchable/visible via
BluetoothŸ. Turn TUNE to Phone
settings, confirm with OK/MENU, select
Discoverable and confirm with OK/
MENU.
Connect an external BluetoothŸ device
268
Alternative 1 - search for the external device
via the car's menu system
Alternative 2 - Search for the car with the
BluetoothŸ function of the external device.
A short press on TEL activates/searches last
connected phone. If a phone is already connected, and TEL is pressed, a shortcut menu
is shown with commonly used menu options
symbol indicates that
for the phone. The
a phone is connected.
A maximum of ten external devices can be registered. Registration is performed once per
device. After registration the device no longer
needs to be activated as visible/searchable.
If you are not already in the normal view, press
TEL in the centre console.
2. Select My Volvo Car on the screen of the
external device and follow the instructions.
3. Enter a PIN code in the external device and
then select to connect.
Example of normal view for phone.
* Option/accessory, for more information, see Introduction.
06 Infotainment system
BluetoothŸ handsfree*
4. Press OK/MENU and enter the same PIN
code via the car keypad in the centre console.
1. Check that the external device is searchable/visible via BluetoothŸ, see the manual
for the external device.
Once the external device is connected, its
BluetoothŸ name appears on the car's TV
screen and the unit can be controlled from the
car.
2. Press TEL and then select Change
phone.
> The car searches for previously connected devices. The external devices
detected are specified with their respective BluetoothŸ name in the TV screen.
Automatic connection
When the handsfree function is active and the
last mobile phone connected is in range it is
connected automatically. If the last connected
mobile phone is not available then the system
will try to connect a mobile phone that was
paired earlier. When the audio system
searches for the last phone connected its name
is shown in the TV screen.
Manual connection
If you want to change the connected mobile
phone, go in phone mode to Phone menu
Change phone.
Change to another external device
It is possible to change a connected device
with another device if there are several devices
in the car. However, the device must first have
been registered to the car, see Connect an
external Bluetooth® device. To change to
another device:
2
3. Select the device to be connected by turning TUNE and confirm with OK/MENU.
> Connection of the external device takes
place.
Disconnecting the mobile phone
Automatic disconnection takes place if the
mobile phone moves out of the audio system's
range. The connection to the mobile phone can
be manually broken in phone mode under
Phone menu Disconnect phone. For more
information on connection, see page 268.
The handsfree function is deactivated when
the engine is switched off and the door is
opened2.
When the mobile phone has been disconnected an ongoing call can be continued by
using the mobile phone's built-in microphone
and speaker.
To call
1. Make sure that the
symbol appears
at the top of the TV screen and that the
handsfree function is in phone mode.
2. Dial either the desired number or speed
dial number, see page 274. Or in normal
view turn TUNE to the right to access the
phone book, and to the left for the call register for all calls. For information on the
phone book, see page 271.
3. Press OK/MENU.
The call is interrupted with EXIT.
NOTE
Even when your mobile phone has been
manually disconnected, some mobile
phones may automatically couple up to the
last handsfree unit connected, e.g. when a
new call begins.
06
Remove the device
A connected mobile phone can be deregistered and removed. This is performed in phone
mode under Phone menu Remove
Bluetooth device.
Only Keyless Drive.
* Option/accessory, for more information, see Introduction.
269
06 Infotainment system
BluetoothŸ handsfree*
Making and receiving calls
Incoming call
–
Press OK/MENU to answer the call, even
if the audio system is in e.g. RADIO or
MEDIA mode.
Refuse or end with EXIT.
Automatic answer
The automatic answer function means that
calls are accepted automatically.
–
Activate/deactivate in phone mode under
Phone menu Call options Auto
answer.
Call lists
The call lists are copied to the handsfree function at each new connection and are then
updated during the connection. In normal view,
turn to the left with TUNE to see the call register
for All calls .
In phone mode it is possible to see all the call
lists under Phone menu All calls:
•
•
•
•
•
All calls
Missed calls
Answered calls
Dialled calls
Call duration
In call menu
Press OK/MENU during an ongoing call to
access the following functions:
06
• Mute - audio system microphone is
muted.
• Mobile phone - the call is transferred from
handsfree to the mobile phone. For some
mobile phones the connection is interrupted. This is normal. The handsfree function
asks if you want to reconnect.
• Dial number - option to call a third party
using the number keys (current call set in
standby).
270
NOTE
Certain mobile phones show a list of the last
dialled numbers in reverse order.
Voice mailbox
In normal view a speed dial number for the
voice mailbox can be programmed in and then
accessed later via a long press on 1.
Voice mailbox number is changed in phone
mode under Phone menu Call options
Voicemail number Change number. If
there is no number stored then this menu can
be reached with one long press on 1.
* Option/accessory, for more information, see Introduction.
Audio settings
Phone call volume
The phone call volume can only be changed
during a call. Use the steering wheel keypad*
or turn the VOL control.
Audio system volume
Providing there is no ongoing call taking place,
the audio system volume is controlled as usual
by turning VOL.
If an audio source is active during an incoming
call then it can be muted automatically. Activate/deactivate in phone mode under Phone
menu Phone settings Sounds and
volume Mute radio/media.
Ring volume
In phone mode go to Phone menu Phone
settings Sounds and volume Ring
volume and adjust by turning VOL. Press OK/
MENU to hear the audio volume. Press EXIT
to save.
Ring signals
The handsfree function has integrated ring signals that can be selected in phone mode under
Phone menu Phone settings Sounds
and volume Ring signals Ring signal 1
etc.
06 Infotainment system
BluetoothŸ handsfree*
symbol
is shown in front of the contact in the phone book.
NOTE
For some mobile phones, the ringtone on
the phone connected will not be switched
off when one of the inbuilt signals for the
handsfree system is used.
NOTE
Phone book
There are two phone books. These are merged
into one in the car and are displayed as a single
phone book in the car.
• The car downloads the mobile phone's
phone book and only displays this phone
book when the mobile phone from which
this phone book was downloaded is connected.
• The car also has a built-in phone book. This
contains all the contacts stored in the car
irrespective of which phone was connected when saving them. These contacts
are visible for all users, regardless of the
mobile phone that is connected to the car.
If a contact is saved in the car then the
3
Quick search for contacts
Changes made from the car to a record in
the mobile phone's telephone book will
result in a new record in the car's telephone
book, i.e. changes will not be saved to the
phone. From the car, this will now look like
you have double records, with different
icons. Note also that when a shortcut number is saved or a change to a contact is
made, this will result in a new record in the
car's phone book.
In order to select the connected phone's ring
signal3, go in phone mode to Phone menu
Phone settings Sounds and volume
Ring signals Mobile phone ring signal.
All use of the phone book requires that the
symbol appears at the top of the TV
screen and that the handsfree function is in
phone mode.
The audio system stores a copy of the phone
book from each paired mobile phone. The
phone book can be copied automatically to the
audio system during each connection.
–
If the phone book contains a ringing caller's
contact information then this is shown in the TV
screen.
Activate/deactivate the function in phone
mode under Phone menu Phone
settings Download phone book.
In normal view turn TUNE to the right to obtain
a list of contacts. Turn TUNE to select and
press OK/MENU to call.
Under the name of the contact is the phone
number that is selected by default. If the symbol ! appears to the right of the contact then
there are several phone numbers stored for the
contact. Press OK/MENU to show the numbers. Change and dial a number other than that
selected by default by turning TUNE. Press
OK/MENU to dial.
Search in the list of contacts by using the centre console's keypad to key in the start of the
contact's name (see "Character table keypad
in centre console" for button functions).
06
The list of contacts can also be accessed from
normal view by pressing and holding the button
on the centre console's keypad with the letter
that the contact searched for starts with. For
example, a long press on the button for 6 gives
instant access to that part of the list where the
contacts with the letter M are located.
Not supported by all mobile phones.
* Option/accessory, for more information, see Introduction.
271
06 Infotainment system
BluetoothŸ handsfree*
Character table keypad in centre
console
Key
Key
+0pw
Function
Space . , - ? @ : ; / ( ) 1
ABCÅÄÆÀÇ2
Function
#*
Searching for contacts
DEFÈÉ3
GHIÌ4
MNOÖØÑÒ6
PQRSß7
06
Search contacts using the text wheel.
Character list
WXYZ9
Shift between upper and lower
case letter.
4
272
1. Turn4 TUNE to the desired letter, press
OK/MENU to confirm. The number and
letter buttons on the control panel in the
centre console can also be used.
2. Continue with the next letter and so on. The
result of the search is shown in the phone
book (3).
JKL5
TUVÜÙ8
NOTE
There is no text wheel for High Performance,
so TUNE cannot be used there to input
characters: only the digit and letter buttons
on the control panel in the centre console
can be used for this.
Changing the input mode (see table below)
Phone book
To search for or edit a contact, go in phone
mode to Phone menu Phone book
Search.
Only applies to High Performance Multimedia and Premium Sound Multimedia.
* Option/accessory, for more information, see Introduction.
3. To change the input mode to numbers or
special characters, or to go to the phone
book, turn TUNE to one of the options (see
explanation in the table below) in the list for
changing the input mode (2), press OK/
MENU.
06 Infotainment system
BluetoothŸ handsfree*
123/
ABC
Change between letters and
numbers with OK/MENU.
More
Change to special characters
with OK/MENU.
1. When the Name row is selected, press
OK/MENU to reach the input mode (illustration above).
New contact
2. Turn4 TUNE to the desired letter, press
OK/MENU to confirm. The number and
letter buttons on the control panel in the
centre console can also be used.
Leads to the phone book (3).
Turn TUNE to select a contact,
press OK/MENU to see the
saved numbers and other information.
3. Continue with the next letter and so on. The
name entered is shown in the input field (2)
in the TV screen.
A short press on EXIT deletes an input character. A long press on EXIT will clear all entered
characters.
Entering letters for New contact.
By pressing a number key in the centre console
when the text wheel is shown (see illustration
above), a new character list (1) appears in the
TV screen. Continue repeatedly pressing the
number key to the desired letter and then
release. Continue with the next letter and so
on. When a button is depressed the entry is
confirmed when another button is depressed.
New contacts can be added in phone mode
under Phone menu Phone book New
contact.
To enter a number, hold in the corresponding
number key.
4
Changing the input mode (see table below)
Input field
NOTE
There is no text wheel for High Performance,
so TUNE cannot be used there to input
characters: only the digit and letter buttons
on the control panel in the centre console
can be used for this.
4. To change the input mode to numbers,
special characters, change between
uppercase/lowercase letters, etc., turn
TUNE to one of the options (see explanation in the table below) in the list (1) and
then press OK/MENU.
When the name has been fully entered, select
OK in the list on the TV screen (1) and press
OK/MENU. Now continue with the telephone
number in the same way as above.
06
When the telephone number has been entered,
press OK/MENU and select a telephone number type (Mobile phone, Home, Work or
General). Press OK/MENU to confirm.
When all details have been filled in, select Save
contact in the menu to save the contact.
Only applies to High Performance Multimedia and Premium Sound Multimedia.
* Option/accessory, for more information, see Introduction.
273
06 Infotainment system
BluetoothŸ handsfree*
123/
ABC
Change between letters and
numbers with OK/MENU.
speed dial number then an option is shown to
save a contact to the selected speed dial number.
More
Change to special characters
with OK/MENU.
Receiving a vCard
OK
Save and go back to Add contact with OK/MENU.
Change between uppercase and
lowercase letters with OK/
MENU.
06
Press OK/MENU, the cursor
moves to the input field (2) at the
top of the TV screen. The cursor
can now be moved, with TUNE,
to the appropriate place to e.g.
insert new letters or delete with
EXIT. To be able to insert new
letters first go back to the input
mode, by pressing OK/MENU.
Speed dial numbers
Use phone mode to add speed dial numbers
under Phone menu Phone book Speed
dial.
Dialling with speed dial numbers can be performed in phone mode using the number keys
on the keypad in the centre console, by pressing a number key and then pressing OK/
MENU. If there is no contact stored on the
274
It is possible to receive a vCard to the car's
phone book from other mobile phones (other
than the one currently connected to the car). In
order to allow this the car is set to visible mode
for BluetoothŸ. The function is activated in
phone mode under Phone menu Phone
book Receive vCard.
Memory status
Memory status of the car's phone book and the
connected mobile phone's phone book can be
seen in phone mode under Phone menu
Phone book Memory status.
Delete phone book
The car's phone book can be deleted, this is
carried out in phone mode under Phone menu
Phone book Clear phone book.
NOTE
Deleting the car's telephone book only deletes contacts in the car's telephone book.
Contacts in the mobile phone's phone book
are not deleted.
* Option/accessory, for more information, see Introduction.
Version information BluetoothŸ
The car's current BluetoothŸ version can be
seen in phone mode under Phone menu
Phone settings Bluetooth software
version in car.
06 Infotainment system
Voice recognition* mobile phone
General
The infotainment system's voice recognition1
allows the driver to voice-activate certain functions in a BluetoothŸ-connected mobile phone
or in Volvo's navigation system - RTI (Road and
Traffic Information System).
NOTE
•
•
The information in this section
describes the use of voice commands
to control a mobile phone connected
using BluetoothŸ. For detailed information on using a mobile phone connected using BluetoothŸ with the car's
Infotainment system see page 267.
The Volvo navigation system RTI (Road
and Traffic Information System) has a
separate user manual which contains
more information on voice control and
voice commands to control that system.
Language
WARNING
The driver always holds overall responsibility for driving the vehicle in a safe manner
and complying with all applicable rules of
the road.
The voice recognition system allows the driver
to voice-activate certain functions of a
BluetoothŸ-connected mobile phone and in
Volvo's navigation system - RTI (Road and
Traffic Information System), while the driver
can keep his/her hands on the wheel at the
same time. The input data are in dialogue form
with spoken commands from the user and verbal replies from the system. The voice recognition system uses the same microphone as
the BluetoothŸ handsfree system (see illustration on page 267) and the voice recognition
system's replies come via the car's speakers.
Language list.
Voice recognition is not possible for all languages. Languages available for voice recognition are marked with an icon in the language
list . Changing the language is performed
in the menu system MY CAR, see page 205.
06
Voice commands offer convenience and help
the driver to avoid being distracted, and
instead concentrate on driving and focus
attention on the road and traffic conditions.
1
Only applies to vehicles equipped with Volvo's navigation system - RTI (Road and Traffic Information System).
* Option/accessory, for more information, see Introduction.
275
06 Infotainment system
Voice recognition* mobile phone
Remember
Keep the following things in mind when you use
the voice recognition system:
• For a command - speak after the tone, with
normal voice at normal speed.
• Do not speak while the system is replying
(the system cannot understand commands
during this time).
• The car's doors and windows must be
closed.
•
Avoid background noise in the passenger
compartment.
NOTE
Steering wheel keypad.
Button for voice recognition
To activate the system
06
Before voice commands to a mobile phone can
be used the mobile phone must be paired and
connected via BluetoothŸ handsfree. If a telephone command is given and no mobile phone
is paired, then the system will provide information about this. For information on pairing and
connecting a mobile phone, see page 268.
• Press the button for voice recognition (1) in
order to activate the system and initiate a
dialogue with voice commands. The system will then display commonly used commands in the TV screen in the centre console.
276
If the driver is unsure of which command to
use, he (she) can say "Help" - the system
then responds with a few different commands which can be used in the current situation.
Voice commands can be disabled by:
•
•
•
•
* Option/accessory, for more information, see Introduction.
Help functions for voice recognition
• Instructions: A function that helps you get
familiar with the system and the procedure
for giving commands.
• Voice training: A function that enables the
voice recognition system to learn to know
your voice and your accent. The function
provides an opportunity to voice train two
user profiles.
The help functions can be accessed by pressing the MY CAR button on the control panel in
the centre console and then turning TUNE to
the desired menu option.
Instructions
The instructions can be started in two ways:
NOTE
This instruction and voice training can only
be started when the car is parked.
saying "Cancel"
not speaking
• Press the button for Voice recognition and
a long press on the steering wheel button for Voice recognition
• Activate the instructions in the menu sys-
Press EXIT or another main source button (e.g. MEDIA).
say "Voice instructions".
tem MY CAR under Settings Voice
settings Voice tutorial. For a description of the menu system, see page 203.
The instructions are divided into 3 lessons,
which take around 5 minutes in total to complete. The system starts with the first lesson.
06 Infotainment system
Voice recognition* mobile phone
To skip a lesson and go to the next one, press
the button for voice recognition and say
"Next". Go back to the previous lesson by saying "Previous".
Exit the instructions by means of a long press
on the button for voice recognition.
Voice training
The system displays up to fifteen phrases for
you to say. Voice training can be started in the
menu system MY CAR under Settings
Voice settings Voice training. Choose
between User 1 or User 2. For a description
of the menu system, see page 203.
Using voice commands
The driver initiates a dialogue with the voice
commands by pressing the button for voice
recognition (see illustration on page 276).
Once a dialogue has been started, commonly
used commands will be shown in the TV
screen. Greyed-out text or text within brackets
is not included in the spoken command.
When the driver becomes accustomed to the
system, he/she can speed up the command
dialogue and skip the prompts from the system, by briefly pressing the button for voice
recognition.
For a description of the menu system, see
page 203.
Dial a number
The system understands the numbers 0 (zero)
to 9 (nine). These numbers can be pronounced
individually, in groups of several numbers at a
time, or the whole number all at once. Numbers
greater than 9 (nine) cannot be handled by the
system, e.g. 10 (ten) or 11 (eleven) are not possible.
The following is an example of a dialogue with
voice commands. The system's reply will vary
depending on the situation.
After voice training has been completed,
remember to set your user profile under Voice
user setting.
Commands can be given in several ways
The user starts the dialogue by saying:
The command "Phone call contact" can be
pronounced as e.g.:
Phone > call number
Additional settings in MY CAR
• "Phone > Call contact" - Say "Phone", wait
Phone call number
for the system's reply, and then continue
by saying "Call contact."
• User setting - Two user profiles can be
set, the function is activated in the menu
system MY CAR under Settings Voice
settings Voice user setting. Choose
between User 1 or User 2. For a description of the menu system, see page 203.
• Voice volume - Can be changed in the
menu system MY CAR under Settings
Voice settings Voice output volume.
For a description of the menu system, see
page 203.
or
or
• "Phone call contact" - Say the whole command in one sequence.
Quick commands
Quick commands for the phone can be found
in the menu system MY CAR under Settings
Voice settings Voice command list
Phone commands and General commands.
System reply
06
Number?
User action
Start saying the numbers (as individual units,
i.e. six-eight-seven, etc.) in the phone number.
If you say several numbers and pause, the system will repeat them, and then say "Continue".
Continue to say the numbers. When finished,
finish the command by saying "Call".
• You can also change the number by saying
the commands "Correct" (which deletes
``
* Option/accessory, for more information, see Introduction.
277
06 Infotainment system
Voice recognition* mobile phone
the last spoken group of numbers) or
"Delete" (which deletes the whole spoken
phone number).
play in the numbered rows and the system
prompts you to select a row number.
• If there are more rows in the list than can
be displayed simultaneously, saying
"Down" allows you to scroll down in the list
(and saying "Up" allows you to scroll up in
the list).
Dialling from the call register
The following dialogue allows you to make a
phone call from one of your mobile phone's call
registers.
The user starts the dialogue by saying:
Phone > call from the call register
or
Phone call from the call register
Continue by responding to the system's
prompts.
Calling voice mailbox
The following dialogue allows you to call your
voice mailbox to check if you have received
any messages. The phone number for your
voice mailbox must be registered in the
BluetoothŸ function, see page 270.
The user starts the dialogue by saying:
Phone > call voice mailbox
Call a contact
The following dialogue allows you to call your
pre-defined contacts in the mobile phone.
06
The user starts the dialogue by saying:
Phone > call contact
or
Phone call voice mailbox
Continue by responding to the system's
prompts.
or
Phone call contact
Continue by responding to the system's
prompts.
Consider the following when you call a contact:
• If there are several contacts with similar
names, they will be presented in the dis-
278
* Option/accessory, for more information, see Introduction.
06 Infotainment system
TV*
General
NOTE
This system only supports TV transmissions
in countries which transmit signals in
mpeg-2 format and follow the DVB-T standard. The system does not support TV transmissions in mpeg-4 format or analogue
transmissions.
NOTE
The TV picture is only shown when the car
is stationary. When the car is moving at a
speed over about 6 km/h the picture disappears, No visual media available while
driving appears on the display screen,
although the audio is heard during this time.
The picture reappears when the car has
stopped.
cut menu is shown with commonly used
menu options.
IMPORTANT
A TV licence is required for this product in
some countries.
Confirm your selection or go to the menu
by pressing OK/MENU.
Navigate in channel lists or menus by turning TUNE.
Menus
The menus inMEDIA are controlled from the
centre console and the steering wheel keypad*. For general information on menu navigation, see page 243 and menu overview, see
page 246.
EXIT - leads up in the menu system, stops
the function in progress.
The next available channel is shown by
pressing
/
.
Overview
NOTE
If the car is equipped with a steering wheel
keypad* and/or remote control* then in
many cases these can be used instead of
the buttons in the centre console. For a
description of the buttons in the steering
wheel, see page 241. For a description of
the remote control, see page 282.
06
NOTE
The reception is dependent both on how
good the signal strength and signal quality
are. The transmission may be disturbed by
various factors such as tall buildings or the
TV transmitter being far away. Coverage
level can also vary depending on where in
the country you are located.
Watch TV
–
Centre console control panel.
Station presets, numeric input.
MEDIA button. Last active source (e.g.
iPodŸ or TV) is activated. If a source is activated and you press MEDIA then a short-
Press MEDIA, turn TUNE until TV is shown
in the display, press OK/MENU.
> A search starts and after a short while
the most recently used channel is
shown.
Changing channel
It is possible to change channel as follows:
* Option/accessory, for more information, see Introduction.
279
06 Infotainment system
TV*
• Turn TUNE, a list of all available channels
in the area is shown. If any of these channels is already saved as a preset then its
preset number is shown to the right of the
channel name. Continue turning TUNE to
reach the desired channel and press OK/
MENU.
• By pressing the preset buttons (0-9).
• Via a short press on the
/
buttons
the next available channel in the area is
shown.
NOTE
06
If the car has been moved within the country, for example, from one city to another, it
is not certain that the presets are available
at the new location as the frequency range
may have changed. In which case, carry out
a new search and save a new preset list, see
the function "Save the available TV channels
as presets", page 280.
NOTE
If no reception is available on the preset
buttons, it may be because the car is at a
location other than where the scan of TV
channels was run, for example, if the car
was driven from Germany to France. A new
selection of country and a new search may
then need to be carried out.
280
Searching TV channels/Preset list
Channel management
1. Press TV mode on OK/MENU.
The preset list can be edited. You can change
the order of the channels that are shown in the
preset list. A TV channel can have more than
one place in the preset list. The TV channel
positions can also vary in the preset list.
2. Turn TUNE to TV menu and press OK/
MENU.
3. Turn TUNE to Select country and press
OK/MENU.
> If one or more countries have previously
been selected then they are shown in a
list.
4. Turn TUNE to either Other countries or
one of the previously selected countries.
Press OK/MENU.
> A list of all available countries is shown.
5. Turn TUNE to the desired country (e.g.
Sweden) and press OK/MENU.
> An automatic scan for available TV
channels starts, this scan takes a little
while. During this time the figure for
each channel found and added as a preset is shown. When the scan is complete a message is shown and the picture is shown. A preset list (max. 30 presets) has now been created and is available. To change channel, see
page 279.
The scan and preset storage can be cancelled
with EXIT.
* Option/accessory, for more information, see Introduction.
To change the order in the preset list, go in TV
mode to TV menu Reorganise presets.
1. Turn TUNE to the channel you want to
move in the list and confirm with OK/
MENU.
> The selected channel is highlighted.
2. Turn TUNE to the new location in the list
and confirm with OK/MENU.
> The channels change places with each
other.
After the preset channels (max. 30) come all the
other channels available in the area. It is possible to move a channel up to a place in the
preset list.
Save the available TV channels as
presets
If the car has been moved within the country,
for example, from one city to another, it is not
certain that the presets are available at the new
location as the frequency range may have
changed. In which case, carry out another scan
and save a new preset list.
06 Infotainment system
TV*
1. Press TV mode on OK/MENU.
Teletext
Picture settings
2. Turn TUNE to TV menu and press OK/
MENU.
It is possible to read Teletext. Follow these
steps:
The settings for brightness and contrast can be
adjusted. For more information, see page 260.
3. Turn TUNE to Autostore and press OK/
MENU.
> An automatic scan for available TV
channels starts, this scan takes a little
while. During this time the figure for
each channel found and added as a preset is shown. When the scan is complete a message is shown and the picture is shown. A preset list (max. 30 presets) has now been created and is available. To change channel, see
page 279.
1. Press the
trol.
Scanning the TV channels
This function automatically scans through the
frequency range for all channels available in the
area where you are. When a channel is found,
it is shown for approx. 10 seconds before
scanning is resumed. Scanning is stopped with
EXIT, then the channel that you just watched
continues to be shown. Scanning does not
affect the preset list.
Activate scanning in TV mode under TV menu
Scan.
button on the remote con-
The reception is lost
2. Enter the page number (3 digits) with the
number keys (0-9) to select page.
> The page is shown automatically.
Enter new page number, or press the remote
/
to go to the next page.
control buttons
Return to TV screen with EXIT or by pressing
button on the remote control.
the
It is also possible to control the teletext with the
coloured buttons on the remote control.
Information about the current
programme
Press the INFO button in order to display the
information about the current programme, the
next programme and its start time. If the
INFO button is pressed once more then additional information on the current programme
can sometimes be displayed, such as start and
end times and a brief description of the current
programme. For more information on the
INFO button, see page 241.
If the reception for the TV channel that is being
shown disappears then the picture will freeze.
Shortly after this a message appears informing
that the reception has been lost for the current
TV channel, and a new search for the channel
continues. When the reception returns the display of the TV channel starts immediately. It is
possible to change channel at any time when
the message is shown.
If the message Reception lost, searching is
shown then this is because the system has
detected that there is no reception for all TV
channels. One possible reason may be that a
border has been crossed and that the system
is set to the wrong country. In which case,
change to the right country in accordance with
"Searching TV channels/Preset list", see
page 280.
06
To return to the TV picture, wait several seconds or press EXIT.
* Option/accessory, for more information, see Introduction.
281
06 Infotainment system
Remote control*
General
The remote control can be used for all functions in the infotainment system. The remote
control's buttons have the same functions as
the buttons in the centre console or steering
wheel keypad*.
When using the remote control, first press the
remote control's button
to position F.
Then aim the remote control at the IR receiver,
which is located to the right of the INFO button
(see page 241) in the centre console.
WARNING
Keep loose objects such as mobile phones,
cameras, remote controls for accessories,
etc. in the glove compartment or other compartments. Otherwise they may injure people in the car in the event of sudden braking
or a collision.
Functions
Key
Function
F = Front TV screen
Change to navigation*
Change to radio source (AM,
FM1 etc.)
Change to media source (Disc,
TV* etc.)
Change to BluetoothŸ handsfree*
Scroll/fast rewind, change track/
song.
Play/pause
06
NOTE
Do not expose the remote control to direct
sunlight (e.g. on the instrument panel) - otherwise problems may arise with the batteries.
Stop
Scroll/fast forward, change
track/song
Menu
To previous, cancels function,
deletes input characters
Corresponds to TUNE in the centre console.
282
* Option/accessory, for more information, see Introduction.
06 Infotainment system
Remote control*
Key
Function
Key
Function
Navigate up/down
Subtitles, selection of language
for text
Navigate right/left
Teletext*, On/Off
Confirm selection or go to the
menu system for the selected
source
Replacing the battery in the remote
control
Volume, decrease
NOTE
Volume, increase
0-9
Preset channels, number and letter input
Shortcuts for favourite setting
Information about the current
programme, song, etc. Also used
when there is more information
available than can be shown in
the TV screen
Battery life is normally 1-4 years and
depends on how much the remote control
is used.
1. Push down the catch on the battery cover
and slide the battery cover in the direction
of the infrared lens.
The remote control is powered by four batteries of the AA/LR6 type.
2. Remove the used batteries, turn the new
batteries in accordance with the symbols
in the battery compartment and fit them.
Take along extra batteries for a long journey.
3. Refit the cover.
06
NOTE
Be sure to dispose of the exhausted batteries in an environmentally safe manner.
Selection of language for soundtrack
* Option/accessory, for more information, see Introduction.
283
Recommendations during driving.........................................................
Refuelling..............................................................................................
Fuel.......................................................................................................
Loading.................................................................................................
Cargo area............................................................................................
Driving with a trailer..............................................................................
Towing and recovery.............................................................................
284
286
289
291
294
297
299
305
DURING YOUR JOURNEY
07 During your journey
Recommendations during driving
General
For more information and further advice, see
the pages 11 and 376.
Economical driving
Driving economically means driving smoothly
while thinking ahead and adjusting your driving
style and speed to the prevailing conditions.
• Drive in the highest gear possible, adapted
to the current traffic situation and road lower engine speeds result in lower fuel
consumption.
• Avoid driving with open windows.
• Avoid sudden unnecessary acceleration
and heavy braking.
• Remove unnecessary items from the car the greater the load the higher the fuel consumption.
• Use engine braking to slow down, when it
can take place without risk to other road
users.
• A roof load and ski box increase air resistance, leading to higher fuel consumption
- remove the load carriers when not in use.
07
• Do not run the engine to operating temperature at idling speed, but rather drive
with a light load as soon as possible - a
cold engine consumes more fuel than a
warm one.
• Cars with manual transmission are started
in 2nd gear under normal conditions on flat
ground.
286
WARNING
Never switch off the engine while moving,
such as downhill, this deactivates important
systems such as the power steering and
brake servo.
Driving in water
The car can be driven through water at a maximum depth of 25 cm at a maximum speed of
10 km/h. Extra caution should be exercised
when passing through flowing water.
During driving in water, maintain a low speed
and do not stop the car. When the water has
been passed, depress the brake pedal lightly
and check that full brake function is achieved.
Water and mud for example can make the
brake linings wet resulting in delayed brake
function.
• Clean the electric contacts of the electric
engine block heater and trailer coupling
after driving in water and mud.
• Do not let the car stand with water over the
sills for any long period of time - this could
cause electrical malfunctions.
IMPORTANT
Engine damage can occur if water enters
the air filter.
In depths greater than 25 cm, water could
enter the transmission. This reduces the
lubricating ability of the oils and shortens
the service life of these systems.
In the event of the engine stalling in water,
do not try restart - tow the car from the water
to a workshop - an authorised Volvo workshop is recommended. Risk of engine
breakdown.
Engine, gearbox and cooling system
Under special conditions, for example hard
driving in hilly terrain and hot climate, there is
a risk that the engine and drive system may
overheat - in particular with a heavy load.
For information about overheating when driving with a trailer, see page 300.
• Remove any auxiliary lamps from in front
of the grille when driving in hot climates.
• If the temperature in the engine's cooling
system is too high the instrument panel's
warning symbol is illuminated and there is
a text message displayed there High
engine temp Stop safely - stop the car in
a safe way and allow the engine to run at
idling speed for several minutes to cool
down.
07 During your journey
Recommendations during driving
• If the text message High engine temp
•
•
•
Stop engine or Coolant level low, Stop
engine is shown then the engine must be
switched off after stopping the car.
In the event of overheating in the gearbox
a built-in protection function is activated
which, amongst other things, illuminates
the instrument panel's warning symbol and
there is a text message displayed there
Transmission hot Reduce speed or
Transmission hot Stop safely - follow
the recommendation given and lower the
speed and stop the car in a safe way and
allow the engine to run at idling speed for
a few minutes to allow the gearbox to cool
down.
If the car overheats, the air conditioning
may be switched off temporarily.
Do not turn the engine off immediately you
stop after a hard drive.
NOTE
It is normal for the engine's cooling fan to
operate for a time after the engine has been
switched off.
Open tailgate
WARNING
Do not drive with an open tailgate! Toxic
exhaust fumes could be drawn into the car
through the cargo area.
least 15 minutes - battery charging is more
effective during driving than running the
engine at idling speed while stationary.
Before a long journey
• Check that the engine is working normally
and that fuel consumption is normal.
• Make sure that there are no leaks (fuel, oil
Do not overload the battery
or other fluid).
The electrical functions in the car load the battery to varying degrees. Avoid using the key
position II when the engine is switched off.
Instead use the I mode - which uses less
power.
• Check all bulbs and tyre tread depths.
• Carrying a warning triangle is a legal
Also, be aware of different accessories that
load the electrical system. Do not use functions
which use a lot of power when the engine is
switched off. Examples of such functions are:
Check the following in particular before the
cold season:
•
•
•
•
ventilation fan
headlamps
windscreen wiper
audio system (high volume).
If the battery voltage is low the information display shows the text Low battery Power save
mode. The energy-saving function then shuts
down certain functions or reduces certain
functions such as the ventilation fan and/or
audio system.
–
In which case, charge the battery by starting the engine and then running it for at
requirement in certain countries.
Winter driving
• The engine coolant must contain at least
50% glycol. This mixture protects the
engine against frost erosion down to
approximately –35 °C. To achieve optimum
antifreeze protection, different types of glycol must not be mixed.
• The fuel tank must be kept filled to prevent
condensation.
07
• Engine oil viscosity is important. Oils with
lower viscosity (thinner oils) facilitate starting in cold weather and also reduce fuel
consumption while the engine is cold. For
more information on suitable oils, see
page 372.
287
07 During your journey
Recommendations during driving
IMPORTANT
Low viscosity oil must not be used for hard
driving or in hot weather.
• The condition of the battery and charge
level must be inspected. Cold weather places great demands on the battery and its
capacity is reduced by the cold.
• Use washer fluid to avoid ice forming in the
washer fluid reservoir.
To achieve optimum roadholding Volvo recommends using winter tyres on all wheels if
there is a risk of snow or ice.
NOTE
The use of winter tyres is a legal requirement
in certain countries. Studded tyres are not
permitted in all countries.
Slippery driving conditions
07
288
Practise driving on slippery surfaces under
controlled conditions to learn how the car
reacts.
07 During your journey
Refuelling
Refuelling
Opening the fuel filler flap manually
Opening/closing the fuel filler flap
• Insert the pump nozzle in the fuel filler
Open the fuel filler flap by slightly pressing
in the rear part of the hatch.
Take out the flap.
Close the flap after fuelling.
For locking/unlocking of the fuel filler flap see
page 57. The fuel filler flap locking logic also
follows the locking or unlocking of the keylessdrive and the central locking system. Fuel filler
flap locking always occurs after a 10-minute
delay.
The fuel filler flap can be opened manually
when it cannot be opened from outside.
Open/remove the side hatch in the cargo
area (same side as fuel filler flap).
Carefully pull the line back in a straight line.
The flap can now be opened from outside.
IMPORTANT
Pull the wire gently - minimal force is
required to disengage the hatch lock.
opening. Take care to insert the nozzle
properly into the filler pipe. The filler pipe
consists of two opening covers. The nozzle
must be pushed past both covers before
refuelling is started.
• Do not overfill the tank but fill until the
pump nozzle cuts out.
NOTE
Excess fuel in the tank can overflow in hot
weather.
07
Filling up with fuel
The fuel tank is fitted with a coverless fuel filler
system.
289
07 During your journey
Refuelling
NOTE
Avoid spillage by waiting approx.
5-8 seconds after refuelling before carefully
removing the nozzle.
Filling with a fuel can
When filling with a fuel can, use the funnel
located under the floor hatch in the cargo area.
Take care to insert the funnel properly into the
filler pipe. The filler pipe consists of two opening covers. The funnel must be pushed past
both covers before filling is started.
07
290
07 During your journey
Fuel
General information on fuel
Fuel of a lower quality than that recommended
by Volvo must not be used as engine power
and fuel consumption is negatively affected.
WARNING
Always avoid inhaling fuel vapour and fuel
splashing in the eyes.
In the event of fuel in the eyes, remove any
contact lenses and rinse the eyes in plenty
of water for at least 15 minutes and seek
medical attention.
Never swallow fuel. Fuels such as petrol and
diesel are highly toxic and could cause permanent injury or be fatal if swallowed. Seek
medical attention immediately if fuel has
been swallowed.
WARNING
Fuel which spills onto the ground can be
ignited.
Switch off the fuel-driven heater before starting to refuel.
Never carry an activated mobile phone
when refuelling. The ring signal could cause
spark build-up and ignite petrol fumes,
leading to fire and injury.
IMPORTANT
Mixtures of various fuel types or use of fuels
which are not recommended will invalidate
Volvo's guarantees and any supplementary
service agreements; this is applicable to all
engines.
NOTE
Extreme weather conditions, driving with a
trailer or driving at high altitudes in combination with fuel grade are factors that could
affect the car's performance.
Catalytic converters
The purpose of the catalytic converters is to
purify exhaust gases. They are located close to
the engine so that operating temperature is
reached quickly.
The catalytic converters consist of a monolith
(ceramic or metal) with channels. The channel
walls are lined with a thin layer of platinum/rhodium/palladium. These metals act as catalysts,
i.e. they participate in and accelerate a chemical reaction without being used up themselves.
Lambda-sondTM
oxygen sensor
The Lambda-sond is part of a control system
intended to reduce emissions and improve fuel
economy.
An oxygen sensor monitors the oxygen content
of the exhaust gases leaving the engine. This
value is fed into an electronic system that continuously controls the injectors. The ratio of fuel
to air directed to the engine is continuously
adjusted. These adjustments create optimal
conditions for efficient combustion, and
together with the three-way catalytic converter
reduce harmful emissions (hydrocarbons, carbon monoxide and nitrous oxides).
Petrol
Petrol must fulfil the EN 228 standard. Most
engines can be run with octane ratings of 95
and 98 RON. Only in exceptional cases should
91 RON be used.
• 95 RON can be used for normal driving.
• 98 RON is recommended for optimum performance and minimum fuel consumption.
When driving in temperatures above +38 °C,
fuel with the highest possible octane rating is
recommended for optimum performance and
fuel economy.
07
IMPORTANT
•
Use only unleaded petrol to avoid damaging the catalytic converter.
•
Do not use any additives which have not
been recommended by Volvo.
291
07 During your journey
Fuel
Diesel
Only use diesel fuel from well-known producers. Never use diesel of dubious quality. Diesel
should fulfil the EN 590 or JIS K2204 standards. Diesel engines are sensitive to contaminants in the fuel, such as excessively high volumes of sulphur particles for example.
At low temperatures (-6 °C to -40 °C), a paraffin
precipitate may form in the diesel fuel, which
may lead to ignition problems. Special diesel
fuel designed for low temperatures around
freezing point is available from the major oil
companies. This fuel is less viscous at low temperatures and reduces the risk of paraffin precipitate.
The risk of condensation in the fuel tank is
reduced if the tank is kept well filled. When
refuelling, check that the area around the fuel
filler pipe is clean. Avoid spilling fuel onto the
paintwork. Wash off any spillage with detergent and water.
IMPORTANT
07
Only ever use fuel that fulfils the European
diesel standard.
IMPORTANT
Diesel type fuels that must not be used:
•
•
•
•
Special additives
Marine diesel fuel
2. Press the START button without depressing the brake and/or clutch pedal.
Heating oil
3. Wait approx. 1 minute.
FAME1
4. To start the engine: Depress the brake and/
or clutch pedal and then press the
START button again.
(Fatty Acid Methyl Ester) and
vegetable oil.
These fuels do not fulfil the requirements in
accordance with Volvo recommendations
and generate increased wear and engine
damage that is not covered by the Volvo
warranty.
Empty tank
The design of the fuel system in a diesel engine
means that if the vehicle runs out of fuel, the
tank may need to be vented in the workshop in
order to restart the engine after fuelling.
Once the engine has stopped due to fuel starvation, the fuel system needs a few moments
to carry out a check. Do this before starting the
engine, once the fuel tank has been filled with
diesel:
The sulphur content must be a maximum of
50 ppm.
1
292
1. Insert the remote control key in the ignition
switch and push it in to the end position
(see page 79).
Diesel fuel may contain a certain amount of FAME, but further amounts must not be added.
NOTE
Before filling with fuel in the event of fuel
shortage:
•
Stop the car on as flat/level ground as
possible - if the car is tilting there is a
risk of air pockets in the fuel supply.
Draining condensation from the fuel filter
The fuel filter separates condensation from the
fuel. Condensation can disrupt engine operation.
The fuel filter must be drained at the intervals
specified in the Service and Warranty Booklet
or if you suspect that the car has been filled
with contaminated fuel.
07 During your journey
Fuel
IMPORTANT
Certain special additives remove the water
separation in the fuel filter.
Start regeneration of the filter by driving the car
until the engine reaches normal operating temperature, preferably on a main road or motorway. The car should then be driven for approximately 20 minutes more.
Diesel particle filter (DPF)
Diesel cars are equipped with a particle filter,
which results in more efficient emission control. The particles in the exhaust gases are collected in the filter during normal driving. Socalled "regeneration" is started in order to burn
away the particles and empty the filter. This
requires the engine to have reached normal
operating temperature.
Filter regeneration takes place automatically
and normally takes 10-20 minutes. It may take
a little longer at a low average speed. Fuel consumption may increase slightly during regeneration.
Regeneration in cold weather
If the car is frequently driven short distances in
cold weather then the engine does not reach
normal operating temperature. This means that
regeneration of the diesel particle filter does
not take place and the filter is not emptied.
NOTE
A smaller reduction of engine power may be
noticed temporarily during regeneration.
When regeneration is complete the warning
text is cleared automatically.
Use the parking heater* in cold weather so that
the engine reaches normal operating temperature more quickly.
IMPORTANT
Fuel consumption and emissions of
carbon dioxide
Fuel consumption figures may change if the car
is equipped with extra equipment that affects
the car's weight. See information on weights
page 369 and table page 376.
The manner in which the car is driven, and
other non-technical factors can also affect fuel
consumption.
Consumption is higher and power output lower
for fuel with an octane rating of 91 RON.
NOTE
Extreme weather conditions, driving with a
trailer or driving at high altitudes in combination with fuel grade are factors that could
affect the car's performance.
If the filter is completely filled with particles,
it may be difficult to start the engine and the
filter is non-functional. Then there is a risk
that the filter will need to be replaced.
07
When the filter has become approximately
80% full of particles, a warning triangle on the
instrument panel illuminates, and the message
Soot filter full See manual is shown on the
instrument panel display.
* Option/accessory, for more information, see Introduction.
293
07 During your journey
Loading
General information on loading
Payload depends on the car's kerb weight. The
total of the weight of the passengers and all
accessories reduces the car's payload by a
corresponding weight. For more detailed information on weights, see page 369.
The tailgate is opened via a button on
the lighting panel or the remote control key, see page 56.
WARNING
The car’s driving properties change
depending on the weight and positioning of
the load.
To bear in mind when loading
• Position the load firmly against the rear
seat's backrest.
07
Note that objects must not prevent the function
of the WHIPS system for the front seats if any
of the rear seat's backrests is folded down,see
page 25.
• Centre the load.
• Heavy objects should be placed as low as
possible. Avoid placing heavy loads on
lowered backrests.
• Cover sharp edges with something soft to
avoid damaging the upholstery.
294
• Secure all loads to the load retaining eyelets with straps or web lashings.
Front seat
The passenger seat backrest can also be
folded for an extra long load, see page 81.
WARNING
A loose object weighing 20 kg can, in a
frontal collision at a speed of 50 km/h, carry
the impact of an item weighing 1000 kg.
WARNING
Roof load
Using load carriers
To avoid damaging the car and for maximum
possible safety while driving, the load carriers
designed by Volvo are recommended.
The protection provided by the inflatable
curtain in the headlining may be compromised or eliminated by high loads.
Carefully follow the installation instructions
supplied with the carriers.
•
• Check periodically that the load carriers
Never load cargo above the backrest.
and load are properly secured. Lash the
load securely with retaining straps.
WARNING
Always secure the load. Always secure the
load. During heavy braking the load may
otherwise shift, causing personal injury to
the car's occupants.
Cover sharp edges and sharp corners with
something soft.
Switch off the engine and apply the parking
brake when loading/unloading long items.
Otherwise you may accidentally knock the
gear lever or gear selector with the load into
a drive position - and the car could then
move off.
• Distribute the load evenly over the load
carriers. Put the heaviest objects at the
bottom.
• The size of the area exposed to the wind,
and therefore fuel consumption, increase
with the size of the load.
• Drive gently. Avoid quick acceleration,
heavy braking and hard cornering.
WARNING
The car's centre of gravity and driving characteristics are altered by roof loads. For
information about the maximum allowable
load on the roof, including load carriers and
any space box, see page 369.
07 During your journey
Loading
Lowering the rear seat backrest
To simplify loading in the cargo area, the rear
seat backrest can be folded down, see
page 84.
Bag holder
Folding bag holder*
The bag holders keep carrier bags in place and
prevent them from overturning and spreading
their contents around the cargo area. The
holder has a capacity of max. 3 kg.
Load retaining eyelets
Folding bag holder
Bag holder
The load retaining eyelets are used to fasten
straps in order to anchor items in the cargo
area.
WARNING
Hard, sharp and/or heavy objects which
protrude may cause injury under violent
braking.
A folding bag holder in the floor can be opened
up in three positions. It can be set to two
adjustment positions and one service position,
as it is known, where it is fully unfolded. There
are also two floor combination variants, one
with adjustment positions in a tub under the
floor and one with adjustment positions in plastic rails. The raising below shows the adjustment position in a tub under the floor.
The load on the central holder is max. 3 kg, and
max. 10 kg on the outer holder.
07
Always secure large and heavy objects with
a seatbelt or cargo retaining straps.
* Option/accessory, for more information, see Introduction.
295
07 During your journey
Loading
12 V socket*
NOTE
The compressor for temporary emergency
puncture repair has been tested and
approved by Volvo. For information on the
use of Volvo's recommended temporary
emergency puncture repair (TMK), see
page 320.
Lift the handle* on the upper floor and fold
up the floor.
Move the floor forwards to an appropriate
position and place it in the adjustment
groove.
Lower the cover to access the electrical
socket.
• The socket also provides voltage when the
remote control key is not in the ignition
switch.
3. In service position, the floor is moved all
the way forwards towards the rear seat
back and placed in the plastic support in
the centre.
IMPORTANT
Max. socket current is 10 A (120 W).
07
NOTE
Remember that using the electrical socket
with the engine switched off involves the
risk of discharging the car's battery.
296
* Option/accessory, for more information, see Introduction.
07 During your journey
Cargo area
Cargo net*
Attaching
NOTE
The easiest way to fit the safety net is via
one of the rear doors.
WARNING
It is necessary to ensure that the upper
securing points of the safety net are fitted
correctly and that the puller-straps are
secured properly. Damaged nets must not
be used.
The cargo net is fitted into four mounting points.
A cargo net prevents cargo from being thrown
forward in the passenger compartment in the
event of heavy braking. For safety reasons, the
cargo net must always be correctly fastened
and secured. The mesh is made of a strong
nylon fabric and secured behind the front seat
backrests.
WARNING
Loads in the luggage compartment must be
anchored well, and also have a correctly fitted safety net.
1. Unfold the cargo net and make sure that
the split upper rod is locked in the
extended position.
2. Hook one end of the rod into the roof
mounting with the anchoring strap locks
turned towards you.
3. Hook the other end of the rod into the roof
mounting on the opposite side - the telescopic spring-loaded retaining hooks facilitate alignment. Take care to press forward
the rod's retaining hooks for each respective roof mounting's front end position.
4. Hook the cargo net's anchoring straps into
the eyes on the rear of the seat slide rails it is easier if the backrests are straightened
and the seats are moved forward slightly.
Pay attention to make sure that you do not
press the seat/backrest hard against the
net when the seat/backrest is moved back
again - only adjust until the seat/backrest
makes contact with the net.
IMPORTANT
07
If a seat/backrest is pushed backwards hard
into the safety net then the net and/or its
roof mounts may be damaged.
5. Tension the cargo net with the anchoring
straps.
* Option/accessory, for more information, see Introduction.
297
07 During your journey
Cargo area
Removal and storage
4. Break the rod in the centre, fold it together
and roll up the net.
Hat shelf
Insert the net in the storage bag.
The folded cargo net is stored in its bag in the
luggage compartment.
The cargo net can be easily removed and folded
up.
Release the tension in the net by pressing
in the button on the anchoring strap's lock
and feeding out part of the strap.
Press in the catch and detach both of the
anchoring strap's hooks.
07
Unhook the rod from its roof mounting by
pulling back on the rod in the roof mountings' rear end position. Press the rod in any
direction so that the hook engages in the
rod, which at the same time releases the
hook on the other side.
Finally, remove the remaining roof mounting hook from the roof mounting.
298
The hat shelf can be removed to provide additional cargo space.
Hat shelf removal
Undo the hat shelf lifting eyes on both
sides.
Unhook the front edge of the hat shelf and
remove it.
07 During your journey
Driving with a trailer
General
Payload depends on the car's kerb weight. The
total of the weight of the passengers and all
accessories, e.g. towbar, reduces the car's
payload by a corresponding weight. For more
detailed information on weights, see
page 369.
If the towing bracket is mounted by Volvo, then
the car is delivered with the necessary equipment for driving with a trailer.
• The car's towing bracket must be of an
approved type.
• If the towbar is retrofitted, check with your
Volvo dealer that the car is fully equipped
for driving with a trailer.
• Distribute the load on the trailer so that the
weight on the towing bracket complies
with the specified maximum towball load.
• Increase the tyre pressure to the recommended pressure for a full load. For tyre
pressure label location, see page 318.
• The engine is loaded more heavily than
usual when driving with a trailer.
• Do not tow a heavy trailer when the car is
brand new. Wait until it has been driven at
least 1000 km.
• The brakes are loaded much more than
usual on long and steep downhill slopes.
Downshift to a lower gear and adjust your
speed.
• For safety reasons, the maximum permitted speed for the car when coupled with a
trailer should not be exceeded. Follow the
regulations in force for the permitted
speeds and weights.
• Maintain a low speed when driving with a
stationary the rear of the car lowers slightly,
which is normal.
Trailer weights
For information on Volvo's permitted trailer
weights, see page 370.
trailer up long, steep ascents.
• Avoid driving with a trailer on inclines of
more than 12%.
Trailer cable
An adapter is required if the car's towing
bracket has 13 pin electrics and the trailer has
7 pin electrics. Use an adapter cable approved
by Volvo. Make sure the cable does not drag
on the ground.
Direction indicators and brake lights on
the trailer
If any of the trailer's lamps for direction indicators are broken, then the combined instrument
panel's symbol for direction indicators flashes
faster than normal and the display shows the
text Bulb fail - Ind. signal trailer.
NOTE
The stated maximum permitted trailer
weights are those permitted by Volvo. The
maximum permitted speed for a car with a
trailer attached is 100 km/h. National vehicle
regulations may further restrict the trailer
weight and speed. Towbars can be certified
for higher towing weights than the car can
actually tow.
WARNING
Follow the stated recommendations for
trailer weights. Otherwise, the car and trailer
may be difficult to control in the event of
sudden movement and braking.
If any of the trailer's lamps for the brake light
are broken then the Bulb fail - Stop lamp
trailer text is shown.
07
Level control*
The rear shock absorbers maintain a constant
height irrespective of the car's load (up to the
maximum permissible weight). When the car is
* Option/accessory, for more information, see Introduction.
299
07 During your journey
Driving with a trailer
Manual gearbox
Overheating
When driving with a trailer in hilly terrain in a hot
climate there may be a risk of overheating.
IMPORTANT
See also the specific information on slow
driving with trailer for cars with the
Powershift automatic transmission on page
119.
Towing bracket
If the car is equipped with a removable towbar,
the installation instructions for the loose section must be followed carefully, see page 302.
• Do not run the engine at higher revolutions
than 4500 rpm (diesel engines: 3500 rpm)
- otherwise the oil temperature may
become too high.
WARNING
Parking on a hill
1. Depress the foot brake.
If the car is fitted with a Volvo detachable
towbar:
Diesel engine 5-cyl
2. Activate the parking brake.
•
•
3. Move the gear selector to position P.
Follow the installation instructions carefully.
•
The detachable section must be locked
with the key before setting off.
•
Check that the indicator window shows
green.
In the event of a risk of overheating the
optimal speed for the engine is 2300-3000
rpm for optimal circulation of the coolant.
4. Release the foot brake.
• Move the gear selector to park position P
Automatic gearbox
Overheating
When driving with a trailer in hilly terrain in a hot
climate there may be a risk of overheating.
• Block the wheels with chocks when park-
• An automatic gearbox selects the optimum
Starting on a hill
gear related to load and engine speed.
• In the event of overheating a warning sym07
bol illuminates on the instrument panel
combined with a text message - follow the
recommendation given.
Steep inclines
• Do not lock the automatic transmission in
a higher gear than the engine "can cope
with" - it is not always a good idea to drive
at a high gear with low engine revolutions.
300
when parking an automatic car with a
hitched trailer. Always use the parking
brake.
ing a car with hitched trailer on a hill.
1. Depress the foot brake.
2. Move the gear selector to driving position D.
Important checks
• The towbar's towball must be cleaned and
greased regularly.
WARNING
The moving parts of the detachable towbar
must not be lubricated/oiled. This may
reduce safety.
3. Release the parking brake.
4. Release the foot brake and start driving off.
NOTE
When a hitch with a vibration damper is
used, the towball must not be lubricated.
07 During your journey
Driving with a trailer
Specifications
G021485
Storing the detachable towbar
The storage location for the removable towbar.
IMPORTANT
Always remove the detachable towbar after
use and store it in the designated location in
the car.
Dimensions, mounting points (mm)
A
887
B
79
C
881
D
441
E
109
F
306
G
Side member
H
Ball centre
07
301
07 During your journey
Driving with a trailer
The indicator window must show red.
G021490
G021488
Fitting of removable towbar
The indicator window must show green.
G021487
07
302
Ensure that the mechanism is in the
unlocked position by turning the key clockwise.
Insert the towball section until you hear a
click.
G000000
G021489
Remove the protective cover by first pressand then pulling the
ing in the catch
cover straight back
.
Turn the key anticlockwise to locked position. Remove the key from the lock.
07 During your journey
Check that the towball section is secure by
pulling it up, down and back.
WARNING
If the towball is not fitted correctly then it
must be detached and reattached in
accordance with the previous instructions.
IMPORTANT
G021495
G021494
Driving with a trailer
Safety cable.
Push in the locking wheel
and turn it
anticlockwise
until you hear a click.
WARNING
Take care to secure the trailer's safety cable
in the intended bracket.
Removal of removable towbar
Only grease in the ball for the towball hitch,
the remainder of the towbar must be clean
and dry.
Turn the locking wheel down fully, until it
comes to a stop. Hold it in this position
while pulling the towball rearward and
upward.
07
WARNING
Insert the key and turn it clockwise to the
unlocked position.
Secure the detachable towbar safely if it is
stored in the car, see page 301.
303
07 During your journey
Driving with a trailer
• Car with trailer subjected to a sudden and
powerful side wind.
• Car with trailer drives on an uneven road
surface or in a pothole.
• Sweeping steering wheel movements.
Operation
Push the protective cover until it snaps
tight.
Trailer Stability Assist - TSA*
The TSA system (Trailer Stability Assist) serves
to stabilise the car and trailer combination if it
begins to snake.
The TSA function is part of the DSTC system
(Dynamic Stability and Traction Control), see
page 138.
Function
07
The snaking phenomenon can occur with any
car/trailer combination. Normally, snaking
occurs at extremely high speeds. But, there is
a risk of it occurring at lower speeds
(70-90 km/h) if the trailer is overloaded or the
load is improperly distributed, e.g. too far back.
In order for snaking to occur, there must be a
triggering factor, e.g.:
304
If snaking has started, it could be difficult or
even impossible to suppress. This makes the
car/trailer combination difficult to control and
there is a risk that you could, for example, end
up in the wrong lane or leave the carriageway.
TSA system continually monitors car movements, particularly lateral movements. If snaking is detected, the front wheels are individually
braked. This serves to stabilise the car/trailer
combination. This is often enough to help the
driver regain control of the car.
If snaking is not eliminated the first time the
TSA system comes into action, the car/trailer
combination is braked with all wheels and
engine power is reduced. Once snaking has
been gradually suppressed and the car/trailer
combination is once again stable, the TSA system stops regulating and the driver once again
has full control of the car.
Miscellaneous
The TSA system can engage within the speed
interval 65 to 160 km/h.
* Option/accessory, for more information, see Introduction.
NOTE
TSA function is switched off if the driver
selects Sport mode, see page 138.
TSA may fail to engage if the driver uses severe
steering wheel movements to try to rectify the
snaking because in such a situation the TSA
system cannot determine whether it is the
trailer or the driver that is causing the snaking.
The DSTC symbol in the combined
instrument panel flashes when the
TSA is working.
07 During your journey
Towing and recovery
Towing
WARNING
Find out the statutory maximum speed limit for
towing before towing begins.
1. Unlock the steering lock by inserting the
remote control key in the ignition switch
and giving a long press on the START/
STOP ENGINE button - key position II is
activated, see page 79 for more information on key positions.
The brake servo and power steering do not
work when the engine is switched off - the
brake pedal needs to be depressed
about 5 times more heavily and the steering
is considerably heavier than normal.
Manual gearbox
Prior to towing:
2. The remote control key must remain in the
ignition switch while the car is being towed.
–
3. Keep the towline taut when the towing
vehicle reduces speed by holding your foot
gently pressed on the brake pedal thereby avoiding unnecessary jerking.
Automatic gearbox Geartronic
IMPORTANT
•
WARNING
Check that the steering lock is unlocked
before towing.
•
The remote control key must be in key
position II - in position I all airbags are
deactivated.
•
Never remove the remote control key
from the ignition switch when the car is
being towed.
The model with Powershift transmission
should not be towed as it is dependent on the
engine running in order to receive sufficient
lubrication. If towing still has to take place, the
route must be as short as possible and then
with very low speed.
In the event of uncertainty as to whether or not
the car is equipped with Powershift transmission, this can be verified by checking the designation on the transmission's label under the
bonnet - see page 366. The designation ”MPS6” means that it is Powershift – transmission otherwise it is Geartronic automatic
transmission.
Note that the car must always be towed with
the wheels rolling forward.
4. Be prepared to brake to stop.
•
Move gear lever into neutral and release
the parking brake.
Automatic gearbox Powershift
Do not tow cars with automatic transmission at speeds higher than 80 km/h
or for distances in excess of 80 km. Follow the speeds that are permitted in
accordance with local traffic regulations.
07
Prior to towing:
–
Move the gear selector to position N and
release the parking brake.
305
07 During your journey
Towing and recovery
IMPORTANT
Avoid towing.
•
•
However, the car can be towed for a
short distance at low speed to move it
from a dangerous position - not further
than 10 km and not faster than
10 km/h. Note that the car must always
be towed with the wheels rolling forward.
In the event of moving a longer distance
than 10 km, the car must be transported
with the drive wheels raised from the
road - professional recovery is recommended.
Towing eye
Take out the towing eye that is located
under the floor hatch in the cargo area.
The towing eye is screwed into a threaded
socket behind a cover on the right-hand side
of the bumper, front or rear.
Attaching the towing eye
NOTE
To access the towing eye/wheel wrench in
the foam block:
•
Version 1: Lift the compressor unit for
the emergency puncture repair kit (point
5) to access the wheel wrench. Lift out
the bottle of sealant (point 6) to access
the towing eye.
•
Version 2: Lift the compressor unit for
the emergency puncture repair kit (point
5) to access the towing eye. The wheel
wrench is located underneath the jack.
Prior to towing:
–
Move the gear selector to position N and
release the parking brake.
Jump starting
07
Do not tow the car to bump start the engine.
Use a donor battery if the battery is discharged
and the engine does not start, see page 114.
IMPORTANT
The catalytic converter may be damaged
during attempts to tow-start the engine.
306
The cover for the towing eye's attachment
point is available in two variants which
must be opened in different ways:
• Open the variant with a recess using a
coin or similar inserted in the recess,
turning it outwards. Then turn out the
cover completely and remove it.
• The second variant has a marking along
one side or in a corner: Press the marking with a finger and fold out the opposite side/corner at the same time using
a screwdriver - the cover turns around
its axis and can then be removed.
07 During your journey
Towing and recovery
Screw the towing eye right in up to its
flange. Turn in the towing eye firmly e.g.
using the wheel wrench.
The towing eye is unscrewed after use.
Place the towing eye back in its position.
Finish by refitting the cover onto the
bumper.
Recovery
Call a recovery service for recovery assistance.
IMPORTANT
Note that the car must always be transported with the wheels rolling forward.
IMPORTANT
The towing eye is only designed for towing
on roads - not for pulling the car unstuck or
out of a ditch. Call a recovery service for
recovery assistance.
NOTE
On certain cars with towbar fitted the towing
eye cannot be attached in the rear bracket.
Attach the towrope in the towbar.
For this reason it is advisable to store the
detachable towbar's towball in the car.
07
307
General .................................................................................................
Changing wheels ..................................................................................
Tyre pressure .......................................................................................
Warning triangle and first-aid kit*..........................................................
Emergency puncture repair (TMK)* ......................................................
308
* Option/accessory, for more information, see Introduction.
310
314
318
319
320
WHEELS AND TYRES
08 Wheels and tyres
General
Driving characteristics
Tyres greatly affect the car's driving characteristics. The type of tyre, dimensions, tyre pressure and speed rating are important for how the
car performs.
Tyres with the greatest tread depth should
always be fitted to the rear of the car (to
decrease the risk of skidding).
New tyres
NOTE
Make sure that both pairs of wheels have
the same type and dimension, and also the
same make.
Direction of rotation
Follow the recommended tyre pressures
specified in the tyre pressure table, see
page 378.
Tyre care
G021778
Tyre age
The arrow shows the tyre's direction of rotation.
08
310
Tyres with a tread pattern which are designed
to only turn in one direction have the direction
of rotation marked with an arrow. The tyre must
always rotate in the same direction throughout
its lifespan. Tyres should only be switched
between front and rear positions, never
between left and right-hand sides, or vice
versa. If the tyres are fitted incorrectly, the car's
braking characteristics and capacity to force
rain and slush out of the way are adversely
affected.
All tyres older than 6 years old should be
checked by an expert even if they seem
undamaged. Tyres age and decompose, even
if they are hardly ever or never used. The function can therefore be affected. This applies to
all tyres that are stored for future use. Examples of external signs which indicate that the
tyre is unsuitable for use are cracks or discoloration.
Tyres are perishable. After a few years they
begin to harden at the same time as the friction
capacity/characteristics gradually deteriorate.
For this reason, aim to get as fresh tyres as
possible when you replace them. This is especially important with regard to winter tyres. The
last four digits in the sequence mean the week
and year of manufacture. This is the tyre's
DOT marking (Department of Transportation),
and this is stated with four digits, for example
1510. The tyre in the illustration was manufactured in week 15 of 2010.
Summer and winter tyres
When summer and winter wheels are changed
the wheels should be marked with which side
of the car they were mounted on, for example
L for left and R for right.
08 Wheels and tyres
General
The correct tyre pressure results in more even
wear, see page 318. Driving style, tyre pressure, climate and road condition affect how
quickly your tyres age and wear. To avoid differences in tread depth and to prevent wear
patterns arising, the front and rear wheels can
be switched with each other. A suitable distance for the first change is approx. 5000 km
and then at 10 000 km intervals. Volvo recommends that you contact an authorised Volvo
workshop for checking if you are uncertain
about tread depth. If significant differences in
wear (>1 mm difference in tread depth)
between tyres have already occurred, the least
worn tyres must always be placed on the rear.
Understeer is normally easier to correct than
oversteer, and leads to the car continuing forwards in a straight line rather than having the
rear end skidding to one side, resulting in possible complete loss of control over the car. This
is why it is important for the rear wheels never
to lose grip before the front wheels.
Wheels should be stored lying down or hanging
up - and not standing up.
WARNING
A damaged tyre may lead to loss of control
over the car.
Tyres with tread wear indicators
Rims and wheel bolts
G021829
Wear and maintenance
Tread wear indicators.
Low wheel bolt
Tread wear indicators are narrow treadless
bands across the width of the tread. On the
side of the tyre are the letters TWI (Tread Wear
Indicator). When the tyre's tread depth is down
to 1.6 mm, the tread depth will be level in height
with the tread wear indicators. Change to new
tyres as soon as possible. Remember that
tyres with little tread depth provide very poor
grip in rain and snow.
High wheel bolt
Locking wheel bolts
Tightening torque:
• Type 1 wheel bolt (steel rim): 110 Nm
• Type 2 wheel bolt (aluminium rim): 130
Nm
• Type 3 Lockable wheel bolt (steel/aluminium rim): 110 Nm
Only use rims that are tested and approved by
Volvo and which are Volvo genuine accessories. Check the torque with a torque wrench.
Locking wheel bolts*
08
Locking wheel bolts* can be used on both aluminium and steel rims. Under the cargo area
* Option/accessory, for more information, see Introduction.
311
08 Wheels and tyres
General
floor there is space for the sleeve for the lockable wheel bolts.
Winter tyres
Volvo recommends winter tyres with particular
dimensions. Tyre dimensions are dependent
on engine variant. When driving on winter tyres,
the correct type of tyres must be fitted to all
four wheels.
NOTE
Volvo recommends that you consult a Volvo
dealer about which wheel rim and tyre types
are most suitable.
Studded tyres
Studded winter tyres should be run in gently for
500-1000 km so the studs settle properly into
the tyres. This gives the tyre, and especially the
studs, a longer service life.
NOTE
The legal provisions for the use of studded
tyres vary from country to country.
that have a tread depth of less than 4 millimetres.
7
Rim width in inches
J
Rim flange profile
Snow chains may only be used on the front
wheels (also applies to all-wheel drive cars).
16
Rim diameter in
inches
Never drive faster than 50 km/h with snow
chains. Avoid driving on bare ground as this
wears out both the snow chains and tyres.
50
Off-set in mm (distance from wheel
centre to wheel contact surface against
the hub)
Using snow chains
WARNING
Use Volvo genuine snow chains or equivalent chains designed for the car model, and
tyre and rim dimensions. In the event of
uncertainty Volvo recommends that you
consult an authorised Volvo workshop. The
wrong snow chains may cause serious
damage to your car and lead to an accident.
Tyre dimensions
The dimensions are stated on all car tyres.
Example of designation: 215/55R16 97W.
205
Tyre width (mm)
50
Ratio between tyre wall height and
tyre width (%)
R
Radial ply
17
Rim diameter in inches (")
93
Codes for the maximum permitted
tyre load, tyre load index (LI)
W
Speed rating for maximum permitted
speed, speed rating (SS). (In this case
270 km/h).
Specifications
The car has whole vehicle approval. This
means that certain combinations of wheels and
tyres are approved. For the permissible combinations, see page 378
Wheel (rim) dimensions
Tread depth
08
312
Road conditions with ice, slush and low temperatures place considerably higher demands
on tyres than summer conditions. Volvo therefore recommends not to drive on winter tyres
Wheels (rims) have a designation of dimensions, for example: 7Jx16x50.
08 Wheels and tyres
General
Load index
Q
160 km/h (used only on winter tyres)
T
190 km/h
H
210 km/h
V
240 km/h
Speed ratings
W
270 km/h
Each tyre can withstand a certain maximum
speed, a speed rating (Speed Symbol; SS).
Y
300 km/h
Each tyre has a certain capacity to carry a load,
a load index (LI). The car's weight determines
the load capacity required of the tyres. Minimum permitted index is specified in the table,
see page 378.
Tyre speed class must at least correspond with
the car's top speed. Minimum permitted speed
rating is specified in the table, see page 378.
The only exception to these conditions is winter tyres (both those with metal studs and those
without), where a lower speed rating may be
used. If such a tyre is chosen, the car must not
be driven faster than the speed rating of the
tyre (for example, class Q can be driven at a
maximum of 160 km/h).
WARNING
The car must be fitted with tyres which have
the same or a higher load index (LI) and
speed rating (SS) than specified. If a tyre
with too low a load index or speed rating is
used, it may overheat.
Traffic regulations determine how fast a car
can be driven, not the speed rating of the tyres.
NOTE
The maximum permitted speed is specified
in the table.
08
313
08 Wheels and tyres
Changing wheels
Spare wheel*1
The spare wheel (Temporary spare) is only
intended for use temporarily and must be
replaced by an ordinary wheel as soon as possible. The car's handling may be altered by the
use of the spare wheel. The spare wheel is
smaller than the normal wheel. The car's
ground clearance is affected accordingly. Pay
attention to high kerbs and do not machine
wash the car. If the spare wheel is fitted on the
front axle, you cannot use snow chains at the
same time. On all-wheel drive cars the drive on
the rear axle can be disconnected. The spare
wheel must not be repaired. The correct tyre
pressure for the spare wheel is stated in the
tyre pressure table, see page 378.
IMPORTANT
•
Never drive faster than 80 km/h with a
spare wheel on the car.
•
The car must never be driven fitted with
more than one "Temporary Spare"
wheel.
4. Undo the attaching screw and lift out the
foam block containing the jack and tools.
5. Take hold of the far end of the spare wheel,
then lift. Push the spare wheel forwards
slightly and lift it out of the storage compartment.
6. Remove the wheel wrench, the jack and
the towing eye from the foam block.
NOTE
Taking out the spare wheel
The spare wheel* plus jack* and wheel
wrench* are stored under the floor in the luggage compartment.
1. Lift the rear edge of the luggage compartment floor (or on models with a jointed luggage compartment floor, take hold of the
luggage compartment floor handle, lift and
move the rear part of the floor forwards).
2. Lift out the storage compartment (optional
extra) - models with a jointed luggage compartment floor only.
3. Lift out the lower floor (models with a jointed luggage compartment floor only).
08
1
314
If the car is equipped with a temporary tyre repair kit, see page 320 for information.
* Option/accessory, for more information, see Introduction.
The jack must be lifted out in order to
access the towing eye.
Jack*
The original jack should only be used for
changing to the spare wheel. The jack's thread
must always be well greased.
Removing
Set up the warning triangle, see page 319 if a
wheel must be replaced at a busy location. The
car and jack* must be on a firm horizontal surface.
08 Wheels and tyres
Changing wheels
1. Apply the parking brake and engage
reverse gear, or position P if the car has an
automatic gearbox.
natively, the wheel covers can be pulled
away by hand.
WARNING
Check that the jack is not damaged, that the
threads are thoroughly lubricated and that it
is free from dirt.
NOTE
Volvo recommends only using the jack* that
belongs to the car model in question, which
is indicated on the jack's label.
The label also indicates the jack's maximum
lift capacity at a specified minimum lifting
height.
The wheel wrench and towing eye
IMPORTANT
5. Screw together the towing eye with the
wheel wrench* until the stop position as
shown in the following illustration.
The towing eye must be screwed into all
threads in the wheel bolt wrench.
2. Take out the spare wheel and tools (see the
description on page 314). There is also a
package containing gloves and a wheel
bag for the punctured wheel.
6. Loosen the wheel bolts ½-1 turn anticlockwise with the wheel wrench.
3. Place chocks in front of and behind the
wheels which will remain on the ground.
Use heavy wooden blocks or large stones
for example.
Never position anything between the
ground and the jack, nor between the jack
and the car's jacking point.
4. Cars with steel rims have removable wheel
covers. Use the removal tool to hook in and
pull off any full-wheel wheel covers. Alter-
7. There are two jacking points on each side
of the car.
WARNING
* Option/accessory, for more information, see Introduction.
08
315
08 Wheels and tyres
Changing wheels
WARNING
Never crawl under the car when it is raised
on the jack.
3. Lower the car so that the wheels cannot
rotate.
Passengers must leave the car when it is
raised on the jack.
Park the car such that passengers have the
car, or ideally a crash barrier, between
themselves and the roadway.
NOTE
IMPORTANT
The ground under the jack must be firm,
smooth and level.
8. Wind up the jack so that the flange in the
bodywork ends up in the notch in the head
of the jack.
9. Lift the car so that the wheel is free.
Remove the wheel bolts and lift off the
wheel.
The car's regular jack is designed only for
use occasionally and for a short time, such
as when changing a wheel with a punctured
tyre, switching between summer tyres and
winter tyres, etc. Only the jack belonging to
the specific model is to be used to jack up
the car. If the car is to be jacked up more
often, or for a longer time than is required
just to change a wheel, use of a garage jack
is recommended. In this instance, follow the
instructions for use that come with the
equipment.
Installation
1. Clean the contact surfaces between wheel
and hub.
08
316
2. Put on the wheel. Tighten the wheel bolts
thoroughly.
4. Tighten the wheel bolts crosswise. It is
important that the wheel bolts are tightened properly (see page 311 for tightening
torques). Check the torque with a torque
wrench.
5.
08 Wheels and tyres
Changing wheels
2. Wind together the jack to the halfway point
so that it fits into the foam block. Place the
end of the handle in the compartment in the
foam block.
3. Put back any tools that have been used in
the relevant compartments in the foam
block.
Refit any full wheel covers.
NOTE
The wheel cover outlet for the valve must be
positioned over the valve on the wheel rim
during fitting.
Replacing the spare wheel* and jack* in
the luggage compartment
The tools and jack* must be returned to their
correct places in the foam block after use.
4. If the spare wheel has been used, put the
foam block back in the storage area and
tighten the attaching screw in the floor of
the storage compartment. The punctured
wheel can be placed in the plastic bag contained in the package with the gloves.
If the spare wheel has not been used, place
the foam block in the spare wheel and
place the spare wheel back in the storage
compartment. Tighten the attaching screw
to the floor of the storage compartment.
IMPORTANT
The tools and jack* must be stored in the
intended location in the car's cargo area
when not in use.
1. Unscrew the towing eye from the wheel
wrench and place the towing eye in the
compartment in the bottom of the foam
block.
08
* Option/accessory, for more information, see Introduction.
317
08 Wheels and tyres
Tyre pressure
Tyre pressure
Fuel economy, ECO pressure
At speeds below 160 km/h, the ECO pressure
is recommended (applies for both full load and
light load - see page 378) in order to obtain
optimum fuel economy.
Checking the tyre pressure
G021830
The tyre pressures must be checked every
month.
The tyre pressure decal on the driver's side
door pillar (between frame and rear door)
shows which pressures the tyres should have
at different loads and speed conditions. This is
also specified in the tyre pressure table, see
page 378.
• Tyre pressure for the car's recommended
tyre dimension
• ECO pressure1
NOTE
Temperature differences change the
tyre pressure.
08
1
318
ECO pressure results in improved fuel economy.
Check tyre pressures on cold tyres. "Cold
tyres" means the tyres are the same temperature as the ambient temperature. After several
few kilometres of driving, the tyres warm up
and the pressure increases.
Inadequate tyre pressure increases fuel consumption, shortens tyre lifespan and impairs
the car's roadholding. Driving on tyres with tyre
pressure that is too low could result in the tyres
overheating and being damaged. Tyre pressure affects travelling comfort, road noise and
steering characteristics.
NOTE
Tyre pressure decreases over time, this is a
natural phenomenon. Tyre pressure also
varies depending on ambient temperature.
08 Wheels and tyres
Warning triangle and first-aid kit*
Warning triangle
Lift the floor hatch (or push the rear part of
the luggage compartment floor forwards in
models with a jointed floor and then lift the
lower floor) and remove the warning triangle.
Take the warning triangle from the case,
fold out and assemble the two loose sides.
Fold out the warning triangle's support
legs.
Follow the regulations for the use of a warning
triangle. Position the warning triangle in a suitable place with regard to traffic.
Ensure the warning triangle and its case are
properly secured in the cargo area after use.
First aid kit*
A case containing first aid equipment is located
on the left side of the cargo area.
08
* Option/accessory, for more information, see Introduction.
319
08 Wheels and tyres
Emergency puncture repair (TMK)*
General
compressor and a bottle with sealing fluid. The
kit works as a temporary repair. The sealing
fluid bottle must be replaced before its expiration date and after use.
The sealing fluid effectively seals tyres punctured in the tread.
NOTE
The emergency puncture repair kit is only
intended for sealing tyres with a puncture in
the tread.
Version 1.
Positioning of the emergency puncture
repair kit and warning triangle
Set up the warning triangle if a tyre is being
sealed in a trafficked location. The warning triangle and emergency puncture repair kit are
located under the floor in the luggage compartment.
1. Lift the rear edge of the luggage compartment floor (or on models with a jointed luggage compartment floor, take hold of the
luggage compartment floor handle, lift and
move the rear part of the floor forwards).
The emergency puncture repair kit has limited
capacity to seal tyres which have punctures in
the wall. Do not seal tyres with the emergency
puncture repair kit if they have larger slits,
cracks or similar damage.
2. Lift out the storage compartment (optional
extra) - models with a jointed luggage compartment floor only.
Connect the compressor to one of the car’s 12
V sockets; see pages 236 and 296. Choose the
socket that is nearest the punctured tyre.
4. Unhook the elastic part of the belt over the
TMK compressor unit on the left side.
3. Lift out the lower floor (models with a jointed luggage compartment floor only).
5. Lift the TMK compressor unit straight up.
NOTE
The compressor for temporary emergency
puncture repair has been tested and
approved by Volvo.
Version 2.
08
320
Emergency puncture repair (TMK: Temporary
Mobility Kit) is used to seal a puncture and
check and adjust tyre pressure. It consists of a
* Option/accessory, for more information, see Introduction.
6. To access the bottle of sealant, it must be
pushed to the left until it can be lifted out
of the foam block.
08 Wheels and tyres
Emergency puncture repair (TMK)*
NOTE
Overview
Sealing punctured tyres
To access the towing eye/wheel wrench in
the foam block:
Version 1: Lift the compressor unit for
the emergency puncture repair kit (point
5) to access the wheel wrench. Lift out
the bottle of sealant (point 6) to access
the towing eye.
•
Version 2: Lift the compressor unit for
the emergency puncture repair kit (point
5) to access the towing eye. The wheel
wrench is located underneath the jack.
After use, hook the belt back onto the left side.
Version 1: The belt must be pulled behind the
foam block (not above).
Version 2: The belt must be in the fork on the
rear part of the foam block.
Label, maximum permitted speed
Switch
Cable
Bottle holder (orange cap)
Protective cap
WARNING
You should not drive faster than 80 km/h
after the emergency tyre repair kit has been
used. Volvo recommends that you visit an
authorised Volvo workshop for inspection of
the sealed tyre (maximum driving distance
is 200 km). The staff there can determine
whether or not the tyre can be repaired or if
it needs to be replaced.
Pressure reducing valve
Air hose
Sealing fluid bottle
Pressure gauge
G014338
•
For information on the function of the parts, see
preceding illustration.
1. Open the lid of the emergency puncture
repair kit.
2. Detach the label for maximum permitted
speed and affix it to the steering wheel.
* Option/accessory, for more information, see Introduction.
08
321
08 Wheels and tyres
Emergency puncture repair (TMK)*
WARNING
WARNING
The sealing fluid can irritate the skin. In the
case of contact with skin, wash away the
fluid with soap and water.
Do not leave children in the car without
supervision when the engine is running.
8. Flick the switch to position I.
3. Check that the switch is in position 0 and
locate the cable and the air hose.
NOTE
Do not break the bottle's seal before use.
The seal is broken automatically when the
bottle is screwed in.
WARNING
Never stand next to the tyre when the compressor is running. If cracks or unevenness
arise then the compressor must be
switched off immediately. The journey
should not be continued. Contacting an
authorised tyre centre is recommended.
4. Unscrew the orange cap and unscrew the
bottle's stopper.
5. Screw the bottle into its holder.
WARNING
Do not unscrew the bottle, it is equipped
with a reverse catch to prevent leakage.
6. Unscrew the wheel's dust cap and screw
in the air hose valve connection to the bottom of the thread on the tyre's air valve.
08
322
7. Plug the cable into the 12 V socket and
start the car.
NOTE
When the compressor starts, the pressure
can increase up to 6 bar but the pressure
drops after approximately 30 seconds.
9. Inflate the tyre for 7 minutes.
IMPORTANT
Risk of overheating. The compressor must
not run for more than 10 minutes.
10. Switch off the compressor to check the
pressure on the pressure gauge. Minimum
pressure is 1.8 bar and maximum 3.5 bar.
* Option/accessory, for more information, see Introduction.
(Release air with the pressure reducing
valve if the tyre pressure is too high.)
WARNING
If the pressure is below 1.8 bar then the hole
in the tyre is too big. The journey should not
be continued. Contacting an authorised tyre
centre is recommended.
11. Switch off the compressor and unplug the
cable from the 12 V socket.
12. Detach the hose from the tyre valve and fit
the valve cap.
13. As soon as possible, drive approximately
3 km at a maximum speed of 80 km/h so
that the sealing fluid can seal the tyre.
Rechecking the repair and pressure
1. Reconnect the equipment.
2. Read the tyre pressure on the pressure
gauge.
• If it is below 1.3 bar then the tyre is
insufficiently sealed. The journey should
not be continued. Contact a tyre centre.
• If the tyre pressure is higher than 1.3
bar, the tyre must be inflated to the pressure specified in accordance with the
tyre pressure table, see page 378 (1
08 Wheels and tyres
Emergency puncture repair (TMK)*
bar=100 kPa). Release air using the
pressure reducing valve if the tyre pressure is too high.
WARNING
Do not unscrew the bottle, it is equipped
with a reverse catch to prevent leakage.
3. Make sure the compressor is switched off.
Detach the air hose and cable. Refit the
dust cap.
4. Fold the hose into the box and leave the
bottle where it is. Place TMK in the luggage.
NOTE
The sealing fluid bottle and the hose must
be replaced after use. Volvo recommends
that this replacement is performed by an
authorised Volvo workshop.
WARNING
WARNING
You should not drive faster than 80 km/h
after the emergency tyre repair kit has been
used. Volvo recommends that you visit an
authorised Volvo workshop for inspection of
the sealed tyre (maximum driving distance
is 200 km). The staff there can determine
whether or not the tyre can be repaired or if
it needs to be replaced.
Check the tyre pressure regularly.
Volvo recommends that you drive to the nearest authorised Volvo workshop for the replacement/repair of the damaged tyre. Advise the
workshop that the tyre contains sealing fluid.
3. Connect the cable to one of the car's 12 V
sockets and start the car.
4. Start the compressor by flicking the switch
to position I.
IMPORTANT
Inflating the tyres
The car's original tyres can be inflated by the
compressor.
1. The compressor must be switched off.
Make sure that the switch is in position 0
and locate the cable and air hose.
2. Unscrew the wheel's dust cap and screw
in the air hose valve connection to the bottom of the thread on the tyre's air valve.
Risk of overheating. The compressor must
not run for more than 10 minutes.
5. Inflate the tyre to the pressure specified in
accordance with the tyre pressure table,
see page 378. (Release air using the pressure reducing valve if the tyre pressure is
too high.)
6. Switch off the compressor. Detach the air
hose and cable.
WARNING
WARNING
Do not leave children in the car without
supervision when the engine is running.
Inhaling car exhaust fumes could result in
danger to life. Never leave the engine running in sealed areas or areas that lack sufficient ventilation.
7. Refit the dust cap.
08
* Option/accessory, for more information, see Introduction.
323
08 Wheels and tyres
Emergency puncture repair (TMK)*
Replacing the sealing fluid canister
Replace the bottle when the expiration date
has passed. Treat the old bottle as environmentally hazardous waste.
WARNING
The bottle contains 1.2-Ethanol and natural
rubber-latex.
Harmful if ingested. Could result in allergic
reaction in the event of skin contact.
Avoid contact with the skin and eyes.
Store out of the reach of children.
08
324
* Option/accessory, for more information, see Introduction.
08 Wheels and tyres
08
325
Engine compartment.............................................................................
Lamps...................................................................................................
Wiper blades and washer fluid..............................................................
Battery...................................................................................................
Fuses.....................................................................................................
Car care................................................................................................
326
328
335
341
344
348
357
MAINTENANCE AND SERVICE
09 Maintenance and service
09
Engine compartment
General
Volvo service programme
To keep the car as safe and reliable as possible, follow the Volvo service programme as
specified in the Service and Warranty Booklet.
Volvo recommends engaging an authorised
Volvo workshop to perform the service and
maintenance work. Volvo workshops have the
personnel, special tools and service literature
to guarantee the highest quality of service.
IMPORTANT
WARNING
Remember that the radiator fan (located at
the front of the engine compartment, behind
the radiator) may start automatically some
after the engine has been switched off.
Always have the engine cleaned by a workshop. There is a risk of fire if the engine is
hot.
Opening and closing the bonnet
Move the catch to the left and open the
bonnet. (The catch hook is located
between the headlamp and grille, see illustration.)
For the Volvo warranty to apply, check and
follow the instructions in the Service and
Warranty Booklet.
Check regularly
WARNING
Check the following oils and fluids at regular
intervals, e.g. when refuelling:
Check that the bonnet locks properly when
closed.
• Coolant
• Engine oil
• Washer fluid
The handle for bonnet opening is always on the
left-hand side.
328
Turn the handle about 20-25 degrees
clockwise. You will hear when the catch
releases.
09 Maintenance and service
Engine compartment
Engine compartment, overview
WARNING
The ignition system has very high voltage
and output. The voltage in the ignition system is highly dangerous. The remote control
key must always be in 0 position when work
is being done in the engine compartment,
see page 79.
Do not touch the spark plugs or ignition coil
when the remote control key is in II position
or when the engine is hot.
Checking the engine oil
The appearance of the engine compartment may
vary depending on engine variant.
IMPORTANT
In order to fulfil the requirements for the
engine's service intervals all engines are
filled with a specially adapted synthetic
engine oil at the factory. The choice of oil
has been made very carefully with regard to
service life, starting characteristics, fuel
consumption and environmental impact.
An approved engine oil must be used in
order that the recommended service intervals can be applied. Only use a prescribed
grade of oil for both filling and oil change,
otherwise you will risk affecting service life,
starting characteristics, fuel consumption
and environmental impact.
Filling washer fluid
Volvo Car Corporation disclaims all warranty liability if engine oil of the prescribed
grade and viscosity is not used.
Radiator
Volvo recommends that oil changes are carried out at an authorised Volvo workshop.
Coolant expansion tank
09
Engine oil dipstick1
Filling engine oil
Reservoir for brake and clutch fluid
(located on the driver's side)
Battery
Volvo recommends Castrol oil products.
Relay and fuse box
When driving under adverse conditions, see
page 372.
Air filter
1
Volvo uses different systems for warning of
low/high oil level or low/high oil pressure. Certain variants have an oil pressure sensor, and
then the lamp for oil pressure is used. Other
variants have an oil level sensor, and then the
driver is informed via the warning symbol in the
centre of the instrument unit as well as by display texts. Certain models have both variants.
Contact a Volvo dealer for more information.
Engines with electronic oil level sensor have no dipstick (5-cyl. diesel).
329
09 Maintenance and service
Engine compartment
09
Change the engine oil and oil filter in accordance with the intervals specified in the Service
and Warranty Booklet.
Using oil of a higher than specified grade is
permitted. If the car is driven in adverse conditions, Volvo recommends using an oil of a
higher grade, see page 372.
measurement will be inaccurate if taken immediately after the engine is switched off. The
dipstick will indicate that the level is too low
because the oil has not had time to flow down
into the oil sump.
4. Pull it out and check the level.
5. If the level is close to MIN then 0.5 litres
should be added. If the level is significantly
below, then an additional amount is
required.
6. If required, check the level again, do it after
driving a short distance. Then repeat steps
1 - 4.
For capacities, see page 373 and onwards.
Engine with oil dipstick2
WARNING
G021737
Never fill above the MAX mark. The level
should never be above MAX or below MIN
as this could lead to engine damage.
The oil level must be between the MIN and MAX
marks.
Measurement and filling if required
Dipstick and filler pipe.
Checking the oil level in a new car is especially
important before the first scheduled oil change.
Volvo recommends checking the oil level every
2 500 km. The most accurate measurements
are made on a cold engine before starting. The
2
330
Only applies to petrol and 4-cyl. diesel.
1. Ensure that the car is level. After switching
off the engine it is important to wait
5 minutes to allow the oil time to run back
to the sump.
2. Pull up and wipe the dipstick.
3. Re-insert the dipstick.
WARNING
Do not spill oil onto the hot exhaust manifold
due to the risk of fire.
09 Maintenance and service
Engine compartment
Engine with electronic oil level sensor3
09
IMPORTANT
In the event of the message Oil level low
Refill 0.5 litre, only fill with 0.5 litres.
NOTE
The oil level is only detected by the system
during driving. The system cannot directly
detect changes when the oil is filled or
drained. The car must be driven
about 30 km before the oil level display is
correct.
Filler pipe
You do not need to take action with respect to
the engine oil level before a message is shown
in the display, see the illustration below.
Message and graph in the display. The left display
shows the Digital combined instrument panel
while the right displays shows the Analog combined instrument panel.
Message
Engine oil level
On certain cars, the oil level can be checked
using the electronic oil level gauge with the
thumbwheel when the engine is switched off,
see page 332. Oil level low Refill 0.5 litre
WARNING
Do not fill more oil if filling level (3) or (4)
appears as shown in the illustration below.
The level must never be above MAX or
below MIN, as this could lead to engine
damage.
WARNING
Do not spill oil onto the hot exhaust manifold
due to the risk of fire.
WARNING
If the message Oil service required is
shown, visit a workshop. The oil level may
be too high.
3
Only applies to 5-cyl. diesel.
331
09 Maintenance and service
09
Engine compartment
Measuring the oil level*
Coolant
If the oil level needs to be checked then it
should be carried out in accordance with the
sequence below.
Checking the level and topping up
Check the coolant regularly
The level must lie between the MIN and MAX
marks on the expansion tank. If the system is
not filled sufficiently, high temperatures could
occur, causing a risk of damage to the engine.
1. Activate key position II, see page 79.
2. Rotate the thumbwheel on the left-hand
stalk switch to position Engine oil level
Wait....
> You will then see information displayed
about the engine oil level.
When topping up the coolant, follow the
instructions on the packaging. It is important
that the mixture of coolant concentrate and
water is correct for the prevailing weather conditions. Never top up with water only. The risk
of freezing increases with both too little and too
much coolant concentrate.
The figures 1-4 represent filling level. Do not fill
more oil if filling level (3) or (4) is shown. The recommended filling level is 4. Message and graph in
the display. The left display shows the Digital combined instrument panel while the right displays
shows the Analog combined instrument panel.
332
For capacities and for standards regarding
water quality, see page 374.
WARNING
Coolant can be very hot. If the coolant
requires topping up when the engine is at
operating temperature, unscrew the expansion tank cap slowly to gently release the
overpressure.
* Option/accessory, for more information, see Introduction.
09 Maintenance and service
Engine compartment
IMPORTANT
•
A high content of chlorine, chlorides
and other salts may cause corrosion in
the cooling system.
Brake and clutch fluid
•
Always use coolant with anti-corrosion
agent as recommended by Volvo.
•
Ensure that the coolant mixture is 50%
water and 50% coolant.
Change the brake fluid every other year or at
every other regular service.
•
Mix the coolant with approved quality
tap water. In the event of any doubt
about water quality, used ready-mixed
coolant in accordance with Volvo recommendations.
•
When changing coolant/replacing cooling system components, flush the cooling system clean with approved quality
tap water or flush with ready-mixed
coolant.
For capacities and recommended fluid grade,
see page 374. The fluid should be changed
annually on cars driven in conditions requiring
hard, frequent braking, such as driving in
mountains or tropical climates with high
humidity.
The engine must only be run with a wellfilled cooling system. Otherwise, temperatures that are too high may occur
resulting in the risk of damage (cracks)
in the cylinder head.
Filling
Checking the level
Brake and clutch fluid have a common reservoir. The level must be between the MIN and
MAX marks that are visible inside the reservoir.
Check the level regularly.
•
09
WARNING
If the brake fluid is below the MIN level in
the brake fluid reservoir, do not drive further
before topping up the brake fluid. Volvo recommends that the reason for the loss of
brake fluid is investigated by an authorised
Volvo workshop.
Brake fluid reservoir location.
The fluid reservoir is protected under the cover
over the cold zone in the engine compartment.
The round cover must be removed first before
the reservoir cap can be reached.
1. Turn and open the cover located on the
covering.
2. Unscrew the reservoir cap and fill the fluid.
The level must be between the MIN and
MAX marks, which are located on the
inside of the reservoir.
IMPORTANT
Do not forget to refit the cap.
333
09 Maintenance and service
09
Engine compartment
Air conditioning system
Troubleshooting and repair
The air conditioning system contains fluorescent tracing agents. Use ultraviolet light when
looking for leaks.
Volvo recommends that you contact an authorised Volvo workshop.
WARNING
The air conditioning system contains pressurised refrigerant R134a. This system must
only be serviced and repaired by an authorised workshop.
334
09 Maintenance and service
Lamps
General
All bulbs are specified, see page 340. The following list contains locations of bulbs and
other light sources that are specialised or
unsuitable for changing except at a workshop:
• Active Xenon headlamps - ABL (Xenon
lamps)
•
•
•
•
•
•
•
Side direction indicators, door mirrors1
Approach lighting, door mirrors
Side position, position lamps rear
09
WARNING
The car’s electrical system must be in key
position 0 when replacing bulbs, see
page 79.
IMPORTANT
Never touch the glass part of the bulbs with
your fingers. Grease from your fingers is
vaporised by the heat, coating the reflector
and then causing damage.
Brake light above the rear windscreen
Interior and luggage compartment lighting
Glovebox lighting
LED lights, general
NOTE
If an error message remains after the broken
bulb has been replaced then we recommend that you visit an authorised Volvo
workshop.
Take out the tool (Torx 30) found under the floor
hatch in the cargo area.
WARNING
On cars with Xenon headlamps, the
replacement of Xenon lamps must be carried out at a workshop - an authorised Volvo
workshop is recommended. Working with
Xenon lamps demands extreme caution
because the headlamp is equipped with a
high voltage unit.
Headlamps front
All of the headlamp bulbs are replaced via the
engine compartment. Loosen and remove the
whole headlamp.
1.
1
Lift out the bonnet stop.
Certain models
335
09 Maintenance and service
Lamps
09
2.
Undo the screw using the tool (Torx 30).
3.
Turn the locking pin anticlockwise.
Cover for main/dipped beam lamps
Dipped beam2
1.
Press the hooks together.
1. Detach the headlamp, see page 335.
Angle out the cover.
2. Undo the cover, see page 336.
Pull out the locking pin.
4.
Release the headlamp by alternately
tilting and pulling it out.
IMPORTANT
Take care when lifting out the headlamp so
as not to damage any parts.
5.
Press down the catch.
Unplug the connector.
Place the headlight on a soft surface so as
not to scratch the lens.
IMPORTANT
Do not pull the electrical cable, only the connector.
6. Replace the relevant bulb as instructed.
The headlight must be fitted and the contact
fitted correctly before switching on the lights or
switching key position.
2
336
Cars with halogen headlights
2. Replace the relevant bulb as instructed.
3.
Press the bulb holder upwards until it
releases.
Pull out the bulb holder.
4. Replace the bulb and put back the parts in
reverse order.
09 Maintenance and service
Lamps
Main beam2
Additional main beam*3
Direction indicators/flashers, front
1. Detach the headlamp, see page 335.
1. Detach the headlamp, see page 335.
1. Detach the headlamp, see page 335.
2. Undo the cover, see page 336.
2. Undo the cover, see page 336.
2.
Undo the cover.
3.
3.
3.
Push in the catch.
Turn the bulb holder anticlockwise.
Pull out the bulb holder.
4. Replace the bulb and put back the parts in
reverse order.
2
3
Press the bulb holder upwards until it
releases.
Pull out the bulb holder.
4. Replace the bulb and put back the parts in
reverse order.
09
Pull out the bulb holder.
4. Replace the bulb and put back the parts in
reverse order.
Cars with halogen headlights
Cars with xenon headlights
``
* Option/accessory, for more information, see Introduction.
337
09 Maintenance and service
Lamps
09
Position/parking lamps4
Side marker lamps
Daytime running lights5
1. Detach the headlamp, see page 335.
1. Detach the headlamp, see page 335.
1.
Undo the cover.
2.
Turn the bulb holder anticlockwise.
2.
Undo the cover.
2.
Turn the bulb holder anticlockwise.
Pull out the bulb holder.
3.
Pull down the bulb holder.
3. Replace the bulb and put back the parts in
reverse order.
4
5
338
4. Replace the bulb and put back the parts in
reverse order.
Not applicable to cars with xenon headlights as these are equipped with LED lamps.
Applicable only to daytime running lights with halogen lamps.
Pull out the bulb holder.
3. Replace the bulb and put back the parts in
reverse order.
09 Maintenance and service
Lamps
Location of rear bulbs
Brake light (LED)
Position lamp
Lamp housing, rear
1. Remove the hatch in the upholstery (1) on
the same side as the defective bulb.
Side marker lamps
2.
Reversing lamp
Rear fog lamp
Rear fog lamp
Direction indicators, brake lights and rear lights
are replaced from inside the cargo area.
Brake light
Direction indicators
09
Press the catch sideways.
Pull out the bulb holder.
3. Remove the blown bulb by pressing it in
and turning anticlockwise.
4. Replace the bulb and put back the parts in
reverse order.
Insert (approx. 20 mm) a blunt, knife-like
object, such as a table knife, at the triangle.
Carefully prise until the lug releases.
IMPORTANT
Take care not to damage any parts.
Turn the bulb holder anticlockwise.
Pull out the bulb holder.
339
09 Maintenance and service
09
Lamps
3. Replace the bulb and put back the parts in
reverse order.
Type
55
H7 LL
Main beamB
65
H9
Additional main
beamC
55
H7 LL
Front direction
indicators
21
HY21W
Position lampB
5
W5W LL
Side marker lamps
5
WY5W LL
Daytime running
lightsB
19
PW19W
Side direction indicators, door mirrorsD
5
WY5W LL
3. Using needle-nose pliers, pull the bulb
straight out to the side. Do not squeeze too
hard with the pliers. Otherwise, the bulb
glass could break.
Direction indicators, rear
21
PY21W LL
Brake light
21
P21W LL
4. Replace the bulb and put back the parts in
reverse order.
Reversing lamp
21
P21W LL
1. Insert a screwdriver under the lamp lens
and gently prize up the lug on the edge.
2. Carefully detach and lift aside the lamp
lens.
Lighting
Dipped
beamB
[W]A
Type
Rear fog lamp
21
H21W LL
Vanity mirror lighting
1.2
T5 Socket
W2x4.6d
Lighting
[W]A
Vanity mirror lighting
340
Specification, bulbs
A
B
C
D
Watt
Cars with halogen headlights
Cars with xenon headlights
Certain models
09 Maintenance and service
Wiper blades and washer fluid
Wiper blades
Service position
system to key position I. (For detailed information on key positions, see page 79.)
2. Briefly press the START/STOP ENGINE
button again to set the car’s electrical system in key position 0.
3. Within 3 seconds, move the right stalk
switch up and hold it in position for
approx. 1 second.
> The wipers then move to standing
straight up.
Wiper blades in service position.
In order to change, clean or lift the wiper blades
(for scraping off ice from the windscreen, for
example) they must be in service position.
IMPORTANT
Before placing the wiper blades in the service position, make sure that they are not frozen down.
09
NOTE
Once the wiper arms have been in service
position, the wipers must be activated and
deactivated before the service position can
be used again.
Replacing the wiper blades
The wipers return to their starting position
when you briefly press the START/STOP
ENGINE button to set the car’s electrical system to key position I (or when the car is
started).
IMPORTANT
If the wiper arms in the service position have
been folded up from the windscreen, they
must be folded back down onto the windscreen before the wipers are allowed to
return to their starting position. This is to
avoid scraping the paint on the bonnet.
1. Place the remote control key in the ignition
lock1 and briefly press the START/STOP
ENGINE button to set the car’s electrical
1
Not necessary in cars with Keyless function.
341
09 Maintenance and service
09
Wiper blades and washer fluid
Fold up the wiper arm when it is in service
position. Press the button located on the
wiper blade mounting and pull straight out
parallel with the wiper arm.
Slide in the new wiper blade until a "click"
is heard.
Check that the blade is firmly installed.
4. Fold the wiper arm back towards the windscreen.
The wipers return from service position to their
starting position when you briefly press the
START/STOP ENGINE button to set the car’s
electrical system to key position I (or when the
car is started).
G021763
Replacing the wiper blades, rear window
NOTE
The wiper blades are different lengths. The
blade on the driver's side is longer than on
the passenger side.
WARNING
Since the car is equipped with airbag
Pedestrian Airbag, Volvo recommends that
genuine wiper arms are used and that you
only use genuine parts for them.
1. Fold out the wiper arm.
2. Grip the inner section of the blade (by the
arrow).
3. Turn anticlockwise to use the blade's end
position against the wiper arm as a lever to
detach the blade more easily.
4. Press the new wiper blade into position.
Check that it is firmly installed.
5. Lower the wiper arm.
Cleaning
For cleaning wiper blades and windscreen, see
page 357 and onwards.
342
09 Maintenance and service
Wiper blades and washer fluid
09
IMPORTANT
Check the blades regularly. Neglected
maintenance shortens the service life of the
wiper blades.
Filling washer fluid
The windscreen and headlamp washers share
a common reservoir.
IMPORTANT
Use washer fluid with antifreeze during the
winter to avoid freezing in the pump, reservoir and hoses.
For capacities, see page 374.
343
09 Maintenance and service
09
Battery
Operation
The service life and function of the battery is
influenced by factors such as the number of
starts, discharging, driving style, driving conditions, climatic conditions etc.
• Never disconnect the battery when the
engine is running.
• Check that the cables to the battery are
correctly connected and properly tightened.
WARNING
•
344
The battery can generate oxyhydrogen
gas, which is highly explosive. A spark
can be formed if a jump lead is connected incorrectly, and this can be
enough for the battery to explode.
•
The battery contains sulphuric acid,
which can cause serious burns.
•
If sulphuric acid comes into contact
with eyes, skin or clothing, flush with
large quantities of water. If acid
splashes into the eyes - seek medical
attention immediately.
NOTE
The life of the battery is shortened if it
becomes discharged repeatedly.
The life of the battery is affected by several
factors, including driving conditions and climate. Battery starting capacity decreases
gradually with time and therefore needs to
be recharged if the car is not used for a
longer time or when it is only driven short
distances. Extreme cold further limits starting capacity.
To maintain the battery in good condition, at
least 15 minutes of driving/week is recommended or that the battery is connected to
a battery charger with automatic trickle
charging.
A battery that is kept fully charged has a
maximum service life.
IMPORTANT
A quick charger must never be used when
charging the battery.
IMPORTANT
If the following instruction is not observed
then the energy saving function for infotainment may be temporarily disengaged, and/
or the message in the information display
about the main battery's state of charge
may be temporarily inapplicable, following
the connection of an external battery or battery charger:
•
The negative battery terminal on the
car's main battery must never be used
for connecting an external battery or
battery charger - only the car chassis
may be used as the grounding point.
See the section "Start assistance" - for a
description of how the cable clamps must
be attached.
09 Maintenance and service
Battery
Symbols on the battery
Avoid sparks and naked
flames.
Use protective goggles.
09
Replacing the main battery
Volvo recommends that you allow an authorised workshop to replace the batteries - an
authorised Volvo workshop is recommended.
For more information on the car's main battery
- see page 114
Risk of explosion.
Eco Start/Stop DRIVe*
Further information in the
owner's manual.
Cars with the Start/Stop function are equipped
with two 12 V batteries - one extra powerful
battery for starting and one standby battery
that helps during the Eco Start/Stop DRIVe
function's starting sequence.
Must be taken for recycling.
Store the battery out of
the reach of children.
For more information on Start/Stop - see
page 123.
For more information on the car's main battery
- see page 114 and 379.
The battery contains corrosive acid.
NOTE
An expended battery must be recycled in an
environmentally safe manner as it contains
lead.
* Option/accessory, for more information, see Introduction.
345
09 Maintenance and service
Battery
09
Battery
Start
Support
Cold start
capacityA,
CCA (A)
760 B
120B
800 C
180C
278×175×190B
150×90×106B
315×175×190C
150×90×130C
70B
8B
80C
10C
SizeD,
L×W×H
(mm)
Capacity
(Ah)
A
B
C
D
According to EN standard.
Manual gearbox.
Automatic gearbox.
Largest possible size.
IMPORTANT
When replacing batteries in cars with the
Start/Stop function, the AGM1 type batteries must be fitted.
1
2
3
346
NOTE
•
The higher the current take-off in the car
(extra cooling/heating, etc.) the more
the batteries must be charged =
increased fuel consumption.
•
When the capacity of the battery has
fallen below the lowest permissible level
then the Start/Stop function is disengaged.
Location of the batteries
Temporarily reduced Start/Stop function due
to high current take-off means:
• The engine starts automatically2 without
the driver depressing the clutch pedal
(manual gearbox).
• The engine starts automatically without the
driver lifting his/her foot off the foot brake
pedal (automatic gearbox).
Absorbed Glass Mat
Automatic starting can only take place if the gear lever is in neutral position.
The battery for starting is described in detail on page 345.
A: Left-hand drive car. B: Right-hand drive car. 1.
Battery for starting3 2. Support battery.
The support battery normally requires no more
service than the normal battery that is used for
starting. A workshop should be contacted in
the event of questions or problems - an authorised Volvo workshop is recommended.
09 Maintenance and service
Battery
IMPORTANT
If the following instruction is not observed
then the Start/Stop function may temporarily cease to work after the connection of an
external battery or battery charger:
•
The negative battery terminal on the
car's main battery must never be used
for connecting an external battery or
battery charger - only the car chassis
may be used as the grounding point.
See the section "Start assistance" - for a
description of how the cable clamps must
be attached.
09
NOTE
If the battery has become so discharged
that everything is "black" and in principle
the car does not have all the normal electrical functions and the engine is subsequently
started using an external battery or battery
charger, then the Start/Stop function will be
activated. It will then be possible for the
engine to be auto-stopped but in the event
of an auto-stop the Start/Stop function may
fail to auto-start the engine due to inadequate capacity in the battery.
The battery must first be charged in order to
ensure a successful auto-start after an autostop. At an outside temperature of +15 °C
the battery needs to be charged for at least
1 hour. At a lower outside temperature a
charging time of 3-4 hours is recommended. The recommendation is that the
battery is charged using an external battery
charger.
If this is not possible then the recommendation is to temporarily deactivate the
Start/Stop function until the battery has
been adequately recharged.
For more information about recharging the
battery, see the section "Battery" in the
chapter "Maintenance and service".
347
09 Maintenance and service
09
Fuses
General
Location, fuse boxes
All electrical functions and components are
protected by a number of fuses in order to protect the car's electrical system from damage by
short circuiting or overloading.
If an electrical component or function does not
work, it may be because the component's fuse
was temporarily overloaded and failed. If the
same fuse fails repeatedly then there is a fault
in the circuit. Volvo recommends that you visit
an authorised Volvo workshop for checking.
Changing
1. Look in the fuse diagram to locate the fuse.
2. Pull out the fuse and check from the side
to see whether the curved wire has blown.
3. If this is the case, replace it with a new fuse
of the same colour and amperage.
WARNING
Never use a foreign object or a fuse with an
amperage higher than that specified when
replacing a fuse. This could cause significant damage to the electrical system and
possibly lead to fire.
348
Fuse box locations in a left-hand drive car. In a
right-hand drive car the fuse box under the glovebox changes sides.
Engine compartment
Under the glovebox
Below right front seat
09 Maintenance and service
Fuses
09
Engine compartment
On the inside of the cover there are tweezers
that facilitate the procedure for the removal
and fitting of fuses.
Function
A
Function
A
Starter motor actuator solenoid
(not Start/Stop)
30
Electric windscreen, right side*
40
ABS pump
40
The fusebox also provides space for several
spare fuses.
ABS valves
30
Positions
Headlamp washers*
20
The label on the inside of the cover shows the
positions of the fuses.
Ventilation fan
40
• Fuses 7-18 are of "JCASE" type and
-
-
type.
1
Primary fuse for fuses 32-36
Electric windscreen, left side*
40
Parking heater*
20
Windscreen wipers
20
-
should be replaced by a workshop1.
• Fuses 19-45 and 47-48 are of "Mini Fuse"
-
30
An authorised Volvo workshop is recommended.
``
* Option/accessory, for more information, see Introduction.
349
09 Maintenance and service
09
350
Fuses
Function
A
Function
A
Function
A
Central electronic module, reference voltage, standby battery
(Start/Stop)
5
10
Ignition coils (petrol)
10
15
Diesel filter heater; Glow plug
control unit (5-cyl. diesel); Oil
pump, automatic gearbox (5-cyl.
diesel Start/Stop)
15
Horn
Brake light
5
Engine control module (4-cyl.)
10
-
-
Relay coil in cooling fan relay (4cyl., 5-cyl. diesel); Lambdasonds (4-cyl. petrol); Mass air
flow meter (diesel), Bypass valve,
EGR cooling (diesel); Regulator
valve, fuel flow (5-cyl. diesel);
Regulator valve, fuel pressure (5cyl. diesel)
5
20
Engine control module (5-cyl.);
Throttle unit (5-cyl. petrol)
Internal relay coils
5
Relay coil in cooling fan relay (5cyl. petrol); Lambda-sonds (5cyl. petrol)
15
Headlamp control
ABS
5
15
Engine control module; Transmission control module; Airbags
10
Transmission control module
15
Light height control*
10
Solenoid clutch A/C
15
Electric control servo
5
12 V socket, tunnel console rear
15
Central electronic module
15
Climate sensor*; air intake throttle motors
10
Mass air flow meter (4-cyl. petrol); EVAP valve (4-cyl. petrol);
Injection valves (5-cyl. petrol);
Control motor, turbo (4-cyl. diesel); Regulator valve, fuel flow (4cyl. diesel); Solenoid, piston
cooling (5-cyl. diesel); Turbo regulator valve (5-cyl. diesel); Oil
level sensor (5-cyl. diesel)
10
12 V socket, tunnel console front
10
Engine control module (5-cyl.)
5
Power seat, right*
20
Valves (petrol); Solenoids (petrol);
Lambda probe (diesel); Crankcase ventilation heater (5-cyl.);
Mass air flow meter (5-cyl. petrol)
* Option/accessory, for more information, see Introduction.
-
-
Coolant pump (Start/Stop)
10
Collision warning system
5
Accelerator pedal sensor
5
Charging point, standby battery
-
09 Maintenance and service
Fuses
Function
A
-
-
-
-
09
351
09 Maintenance and service
09
Fuses
Under the glovebox
On the inside of the cover for the fusebox in
the engine compartment there are tweezers
that facilitate the procedure for the removal
and fitting of fuses.
The fusebox in the engine compartment also
provides space for several spare fuses.
Replacing fuses
The fuses can be accessed when a protective
cover has been removed from the fusebox.
352
Cover removal
1. Take hold of the recess and pull until the
locking lugs in the lower edge of the cover
are released from the fusebox.
2. Remove the cover.
NOTE
A relatively large amount of tensile force is
required to release the locking lugs at the
top edge of the cover from the electrical
distribution unit.
09 Maintenance and service
Fuses
Cover refitting
Function
A
Function
A
Fuel pump
20
Central locking system, fuel filler
flapB
10
Climate panel
10
Steering wheel module
7.5
-
1. Guide in the lower lugs.
2. Turn the cover upwards until the upper lugs
engage.
NOTE
Make sure that the upper locking lugs are
seated properly in the grooves of the electrical distribution unit.
-
Rear window wiper
15
Reserve position, interior lighting
5
10
Siren alarm*; Data link connector
OBDII
5
Interior lighting; Power seats
Blind, glass roof*
10
Main beam
15
Rain sensor*; Dimming, interior
rearview mirror*; Moisture sensor*
5
-
Collision warning system*
5
-
-
Unlocking, tailgateA
09
-
Reversing lamp
10
Windscreen wipersC; Rear windscreen wiperC
20
Immobiliser
5
Reserve position 1, constant
voltage
15
10
-
-
The label on the inside of the cover shows the
positions of the fuses.
Reserve position 3, constant
voltage
5
Reserve position 2, constant
voltage
20
The fuses are of "Mini Fuse" type.
Steering lock
15
Movement sensor alarm*;
Remote receiver
5
Combined instrument panel
5
Positions
* Option/accessory, for more information, see Introduction.
353
09 Maintenance and service
Fuses
09
A
B
C
D
E
F
354
Function
A
Windscreen wipersD; Rear windscreen wiperD
20
Central locking system, fuel filler
flapE
10
Unlocking, tailgateF
10
PTC element, air preheater*;
Button, rear seat heating*
7.5
Airbags; Pedestrian airbag
10
Reserve position 4, constant
voltage
7.5
-
-
-
-
See also fuse 84.
See also fuse 83.
See also fuse 82.
See also fuse 77.
See also fuse 70.
See also fuse 65.
* Option/accessory, for more information, see Introduction.
09 Maintenance and service
Fuses
09
Below right front seat
On the inside of the cover for the fusebox in
the engine compartment there are tweezers
that facilitate the procedure for the removal
and fitting of fuses.
The fusebox in the engine compartment also
provides space for several spare fuses.
Positions
The label on the inside of the cover shows the
positions of the fuses.
2
• Fuses 24-28 are of "JCASE" type and
should be replaced by a workshop2.
• Fuses 1-23 and 29-46 are of "Mini Fuse"
Function
A
Control panel, right front door
25
Control panel, left rear door
25
Control panel, right rear door
25
type.
Function
A
-
-
Keyless*
10
Door handle (Keyless*)
5
Control panel, left front door
25
Power seat left*
-
20
-
An authorised Volvo workshop is recommended.
``
* Option/accessory, for more information, see Introduction.
355
09 Maintenance and service
09
Fuses
Function
A
Function
A
Function
A
-
-
Trailer socket 1*
40
-
-
Audio control unit (amplifier)*
5
Rear window defroster
30
-
-
-
-
-
-
-
-
Telematics*; Bluetooth*
5
BLIS*
5
-
-
Audio; Infotainment control unit
15
Parking assistance*
5
-
-
Digital radio*; TV*
10
Parking camera*
5
12 V socket, cargo area
15
-
-
-
-
-
-
-
-
Seat heating (driver's side)
15
-
-
Seat heating (passenger side)
15
-
-
-
-
-
-
-
-
Trailer socket 2*
20
-
-
Primary fuse for fuses 12-16:
Infotainment
40
Seat heating, rear right*
15
Seat heating, rear left*
15
AWD control module*
15
-
356
-
* Option/accessory, for more information, see Introduction.
09 Maintenance and service
Car care
Washing the car
Wash the car as soon as it becomes dirty.
Wash the car in a car wash with oil separator.
Use car shampoo.
WARNING
Always have the engine cleaned by a workshop. There is a risk of fire if the engine is
hot.
• Hose down the underbody.
• Rinse the entire car until the dissolved dirt
has been removed so as to reduce the risk
of scratches from washing. Do not spray
directly onto the locks.
• If necessary, use cold degreasing agent on
very dirty surfaces. Note that in this case,
the surfaces must not be hot from the sun!
• Wash using a sponge, car shampoo and
plenty of lukewarm water.
• Clean the wiper blades with a lukewarm
For cleaning:
–
Set the wiper blades in service position,
see page 341.
NOTE
• Remove bird droppings from the paintwork
as soon as possible. Bird droppings contain chemicals that affect and discolour
paintwork very quickly. An authorised
Volvo workshop is recommended for the
removal of any discoloration.
09
IMPORTANT
Dirty headlamps have impaired functionality. Clean them regularly, when refuelling for
example.
Do not use any corrosive cleaning agents
but use water and a non-scratching sponge
instead.
NOTE
Outside lighting such as headlamps, fog
lamps and rear lamps may temporarily have
condensation on the inside of the lens. This
is normal, all exterior lighting is designed to
withstand this. Condensation is normally
vented out of the lamp housing when the
lamp has been switched on for a time.
Wash the wiper blades and windscreen regularly with lukewarm soap solution or car
shampoo.
Do not use any strong solvents.
Automatic car washes
An automatic car wash is a simple and quick
way of washing the car, but it cannot reach
everywhere. Handwashing the car is recommended for achieving optimum results.
NOTE
The car must only be washed by hand over
the first few months. This is because the
paint is more delicate when it is new.
soap solution or car shampoo.
• Dry the car using a clean, soft chamois or
a water scraper. If you avoid allowing
drops of water to dry in strong sunlight, you
reduce the risk of water drying stains which
may need to be polished out.
High-pressure washing
Cleaning the wiper blades
Asphalt, dust and salt residue on wiper blades,
as well as insects, ice etc. on the windscreen,
impair the service life of wiper blades.
When using high-pressure washing, use
sweeping movements and make sure that the
nozzle does not come closer than 30 cm to the
surface of the car (the distance applies to all
exterior parts). Do not spray directly onto the
locks.
357
09 Maintenance and service
09
Car care
Testing the brakes
WARNING
IMPORTANT
Avoid waxing and polishing on plastic and
rubber.
Always test the brakes after washing the
car, including the parking brake, to ensure
that moisture and corrosion do not attack
the brake linings and reduce braking performance.
When using degreasant on plastic and rubber, only rub with light pressure if it is necessary. Use a soft washing sponge.
Lightly depress the brake pedal now and then
when driving long distances in rain or slush.
The heat from the friction causes the brake linings to warm up and dry. Do the same thing
after starting in very damp or cold weather.
Polishing agent that contains abrasive must
not be used.
Exterior plastic, rubber and trim
components
A special cleaning agent available from Volvo
dealers is recommended for the cleaning and
care of coloured plastic parts, rubber and trim
components, such as glossy trim mouldings.
When using such a cleaning agent the instructions must be followed carefully.
Polishing glossy trim mouldings could wear
away or damage the glossy surface layer.
Rims
Only use rim cleaning agent recommended by
Volvo.
Strong rim cleaning agents can damage the
surface and cause stains on chrome-plated
aluminium rims.
Polishing and waxing
Polish and wax the car if the paintwork is dull
or to give the paintwork extra protection.
The car does not need to be polished until it is
at least one year old. However, the car can be
waxed during this time. Do not polish or wax
the car in direct sunlight.
Wash and dry the car thoroughly before you
begin polishing or waxing. Clean off asphalt
and tar stains using tar remover or white spirit.
358
* Option/accessory, for more information, see Introduction.
More stubborn stains can be removed using
fine rubbing paste designed for car paintwork.
Polish first with a polish and then wax with liquid or solid wax. Follow the instructions on the
packaging carefully. Many preparations contain both polish and wax.
IMPORTANT
Only paint treatment recommended by
Volvo should be used. Other treatment such
as preserving, sealing, protection, lustre
sealing or similar could damage the paintwork. Paintwork damage caused by such
treatments is not covered by Volvo warranty.
Water-repellent coating*
Never use products such as car wax,
degreaser or similar on glass surfaces as this could ruin their water-repellent
properties.
Take care when cleaning so as not to damage
the glass surface.
To avoid damaging glass surfaces when
removing ice – only use plastic ice scrapers.
There is natural wear of the water-repellent
coating.
Treatment with a special finishing agent available from Volvo dealers is recommended in
09 Maintenance and service
Car care
order to maintain the water-repellent properties. This should be used first after three years
and then each year.
Rustproofing – inspection and
maintenance
The car received a thorough and complete
rustproofing at the factory. Parts of the body
are made of galvanised sheet metal. The
underbody is protected by a wear-resistant
anti-corrosion compound. A thin, penetrating
rustproofing fluid was sprayed into the
exposed members, cavities, closed sections
and side doors.
Under normal conditions the rustproofing does
not require treatment for approximately 12
years. After this period, it should be treated at
three-year intervals. Volvo recommends that
you engage an authorised Volvo workshop for
assistance if the car needs further treatment.
Dirt and road salt can lead to corrosion so it is
important to keep the car clean. The car's rustproofing needs to be checked regularly and
touched-up if necessary in order for it to be
maintained.
Cleaning the interior
Only use cleaning agents and car care products recommended by Volvo. Clean regularly
and follow the instructions included with the
car care product.
Vacuuming is important prior to using cleaning
agents.
Carpets and cargo area
Remove inlaid carpets for separate cleaning of
the floor carpet and the inlaid carpets. Use a
vacuum cleaner to remove dust and dirt.
Each inlay mat is secured with pins.
–
Take hold of the inlay mat at each pin and
lift the mat straight up.
Fit the inlay mat in place by pressing it in at
each pin.
WARNING
Before setting off check that the inlaid mat
in the driver area is firmly affixed and
secured in the pins in order to avoid getting
caught adjacent to and under the pedals.
A special textile cleaner is recommended for
stains on the floor mat after vacuuming. Floor
mats should be cleaned with agents recommended by your Volvo dealer!
09
Stains on fabric upholstery and roof
upholstery
A special fabric cleaning agent, available from
authorised Volvo dealers, is recommended to
avoid impairing the fire retardant qualities of
the upholstery.
IMPORTANT
Sharp objects and Velcro may damage the
fabric upholstery.
Treating stains on leather upholstery
Volvo's leather upholstery is chromium-free
and is treated to preserve its original appearance.
Leather upholstery ages and acquires a beautiful patina over time. The leather is refined and
processed so that it retains its natural characteristics. It is given a protective coating, but
regular cleaning is required in order to maintain
both characteristics and appearance. Volvo
offers a comprehensive product for the cleaning and treatment of leather upholstery which,
when used in accordance with the instructions,
preserves the leather's protective coating.
After a period of use the natural appearance of
the leather will nevertheless emerge, depending more or less on the surface texture of the
leather. This is a natural maturing of the leather
and shows that it is a natural product.
359
09 Maintenance and service
09
Car care
To achieve best results Volvo recommends
cleaning and the application of protective
cream once to four times per year (or more if
necessary). The Volvo Leather Care kit is available from your Volvo dealer.
IMPORTANT
•
•
Certain items of coloured clothing (for
example, jeans and suede garments)
may stain the upholstery.
Never use strong solvents. Such products may damage fabric, vinyl and
leather upholstery.
Washing instructions for leather
upholstery
1. Pour the leather cleaner on the dampened
sponge and squeeze out a strong foam.
360
Protective treatment of leather
upholstery
1. Pour a small amount of the protective
cream on the felted cloth and massage in
a thin layer of cream with gentle circular
movements on the leather.
2. Allow the leather to dry for 20 minutes
before use.
The leather has now been given improved protection against stains and improved UV protection.
Washing instructions for the leather
steering wheel
• Remove dirt and dust with a soft pre-moistened sponge and neutral soap.
•
Leather needs to breathe. Never cover the
leather steering wheel with protective plastic.
2. Work the dirt away with gentle circular
movements.
• Use natural oils. Volvo's leather care
3. Dab accurately with the sponge on the
stains. Allow the sponge to absorb the
stain. Do not rub.
If the steering wheel has stains:
4. Wipe off with soft paper or a cloth and
allow the leather to dry completely.
–
agents are recommended for best results.
Group 1 (ink, wine, coffee, milk, sweat and
blood)
Use a soft cloth or sponge. Mix a 5%
ammonia solution. (For blood stains, use a
solution of 2 dl water and 25g salt.)
Group 2 (fats, oils, sauces and chocolate)
1. Same procedure as for group 1.
2. Polish with an absorbent paper or cloth.
Group 3 (dry dirt, dust)
1. Use a soft brush to remove the dirt.
2. Same procedure as for group 1.
Treating stains on interior plastic, metal
and wood parts
A fibrillated fibre or microfibre cloth, lightly
moistened with water, available from Volvo
dealers, is recommended for cleaning interior
parts and surfaces.
Do not scrape or rub stains. Never use strong
stain removers. A special cleaning agent available from Volvo dealers can be used for more
difficult cleaning.
Cleaning seatbelts
Use water and a synthetic detergent. A special
textile cleaning agent is available from your
Volvo dealer. Make sure the seatbelt is dry
before allowing it to retract.
09 Maintenance and service
Car care
Touching up minor paintwork damage
Colour code
Paint is an important part of the car's rustproofing and should therefore be checked regularly. To avoid the onset of rust, damaged
paintwork should be rectified immediately. The
most common types of paintwork damage are
stone chips, scratches and marks on the edges
of wings, doors and bumpers.
09
Repair minor paintwork damage such as
stone chips and scratches
Materials
• primer1 - a special adhesive primer in a
• basecoat and clearcoat - available in spray
cans or as touch-up pens/sticks2
• masking tape
• fine sand paper1.
G021832
spray can is available for e.g. plasticcoated bumpers
Car colour code
It is important that the correct colour is used.
For product decal location, see page 366.
Before work is begun, the car must be clean
and dry and at a temperature above 15 °C.
1. Apply a piece of masking tape over the
damaged surface. Then remove the tape to
remove any loose paint.
If the damage is down to the metal, use of
a primer is appropriate. In the event of
damage to a plastic surface, an adhesive
primer should be used to give better results
- spray into the lid of the spray can and
brush on thinly.
1
2
If required.
Follow the instructions that are included with the package for the touch-up pen/stick.
``
361
09 Maintenance and service
09
Car care
2. Before painting, gentle polishing using a
very fine polishing agent may be carried
out locally if required (e.g. if there are any
uneven edges). The surface is cleaned
thoroughly and left to dry.
3. Stir the primer well and apply using a fine
brush, a matchstick or similar. Finish off
with a basecoat and clearcoat once the
primer has dried.
4. For scratches, proceed as above, but
mask around the damaged area to protect
the undamaged paintwork.
NOTE
If the stone chip has not penetrated down
to the meal and an undamaged layer of paint
remains in place, fill in with basecoat and
clearcoat as soon as the surface has been
cleaned.
362
09 Maintenance and service
09
363
Type designations.................................................................................
Dimensions and weights.......................................................................
Engine specifications............................................................................
Engine oil...............................................................................................
Fluids and lubricants.............................................................................
Fuel.......................................................................................................
Wheel and tyres, dimensions and pressure .........................................
Electrical system...................................................................................
Type approval.......................................................................................
Symbols in the display..........................................................................
364
366
368
371
372
374
376
378
379
380
392
SPECIFICATIONS
10 Specifications
Type designations
Label location
10
366
10 Specifications
Type designations
Knowing the car's type designation, vehicle
identification and engine numbers can facilitate all contact with an authorised Volvo dealer
regarding the car and when ordering spare
parts and accessories.
Type designation, vehicle identification
number, maximum permissible weights,
codes for colour and upholstery and type
approval number. The label is visible when
the right rear door is opened.
NOTE
It is not intended that the decals illustrated
in the owner's manual should be exact replicas of those in the car. They are included
to show their approximate appearance and
location in the car. The information that
applies to your particular car is available on
the respective decals for your car.
10
Label for A/C system.
Label for parking heater.
Engine code and engine serial number.
Label for engine oil.
Gearbox type designation and serial number.
Manual gearbox
Automatic gearbox
Car's identification number. (VIN Vehicle
Identification Number)
Further information on the car is presented in
the registration document.
367
10 Specifications
Dimensions and weights
Dimensions
10
Dimensions
A
B
C
368
Wheelbase
Length
Load length, floor, folded rear
seat
D
Load length, floor
E
Height
F
Load height
mm
2647
G
Dimensions
mm
Front track
1546A
1551B
4369
1559C
1508
H
Rear track
1536A
684
1541B
1445
1549C
532
I
Load width, floor
J
Width
960
1802
A
B
C
Dimensions
mm
K
Width including door mirrors
2041
L
Width including folded-in door
mirrors
1857
Offset 46 mm.
Offset 50 mm.
Offset 52.5 mm.
10 Specifications
Dimensions and weights
Weights
Kerb weight includes the driver, the fuel tank
90% full and all fluids.
The weight of passengers and accessories,
and towball load (when a trailer is hitched, see
table page 370) influences the payload and is
not included in the kerb weight.
WARNING
The car's driving characteristics change
depending on how heavily it is loaded and
how the load is distributed.
10
Permitted max. load = Gross vehicle weight Kerb weight.
NOTE
The documented kerb weight applies to
cars in the standard version - i.e. a car without extra equipment or accessories. This
means that for every accessory added the
loading capacity of the car is reduced correspondingly by the weight of the accessory.
For information on decal location, see page 366.
Examples of accessories that reduce loading capacity are the Kinetic/Momentum/
Summum equipment levels, as well as other
accessories such as Towbar, Load carrier,
Space box, Audio system, Auxiliary lamps,
GPS, Fuel-driven heater, Safety grille, Carpets, Luggage cover, Power seats, etc.
Max. gross vehicle weight
Weighing the car is a certain way of ascertaining the kerb weight of your own particular car.
Equipment level
Max. train weight (car+trailer)
Max. front axle load
Max. rear axle load
Max. load: See registration document.
Max. roof load: 75 kg.
369
10 Specifications
Dimensions and weights
Towing capacity and towball load
10
Engine
Gearbox
Max. weight braked trailer (kg)
Max. towball load (kg)
T3
Manual, B6
1300
75
T4
Manual, B6
1300
75
D2
Manual, B6
1300
75
D3
Manual, M66
1500
75
D3
Automatic, TF-80SD
1500
75
D4
Manual, M66
1500
75
D4
Automatic, TF-80SD
1500
75
Max. weight unbraked trailer (kg)
370
Engine
Gearbox
Max. weight unbraked trailer (kg)
Max. towball load (kg)
T3
Manual, B6
650
50
T4
Manual, B6
650
50
D2
Manual, B6
650
50
D3
Manual, M66
700
50
D3
Automatic, TF-80SD
750
50
D4
Manual, M66
700
50
D4
Automatic, TF-80SD
750
50
10 Specifications
Engine specifications
Engine specifications
10
NOTE
Not all engines are available in all markets.
A
Engine
Engine
codeA
Output
(kW/rpm)
Output
(hp/rpm)
Torque (Nm/
rpm)
No. of
cylinders
Bore
(mm)
Stroke
(mm)
Swept
volume
(litres)
Compression
ratio
T3
B4164T3
110/5700
150/5700
240/1600–4000
4
79
81.4
1.596
10.0:1
T4
B4164T
132/5700
180/5700
240/1600–5000
4
79
81.4
1.596
10.0:1
D2
D4162T
84/3600
115/3600
270/1750-2500
4
75
88.3
1.560
16.0:1
D3
D5204T6
110/3500
150/3500
350/1500-2750
5
81.0
77.0
1.984
16.5:1
D4
D5204T4
130/3500
177/3500
400/1750-2750
5
81.0
77.0
1.984
16.5:1
Engine code, component and serial number can be read on the engine, see page 366.
371
10 Specifications
Engine oil
Adverse driving conditions
10
Adverse driving conditions can lead to abnormally high oil temperature or oil consumption.
Below are some examples of adverse driving
conditions.
Check the oil level more frequently for long
journeys:
•
•
•
•
towing a caravan or trailer
in mountainous regions
at high speeds
in temperatures colder than -30 °C or hotter than +40 °C
The above also apply to shorter driving distances at low temperatures.
Choose a fully synthetic engine oil for adverse
driving conditions. It provides extra protection
for the engine.
Volvo recommends Castrol oil products.
IMPORTANT
In order to fulfil the requirements for the
engine's service intervals all engines are
filled with a specially adapted synthetic
engine oil at the factory. The choice of oil
has been made very carefully with regard to
service life, starting characteristics, fuel
consumption and environmental impact.
An approved engine oil must be used in
order that the recommended service intervals can be applied. Only use a prescribed
grade of oil for both filling and oil change,
otherwise you will risk affecting service life,
starting characteristics, fuel consumption
and environmental impact.
Volvo Car Corporation disclaims all warranty liability if engine oil of the prescribed
grade and viscosity is not used.
Volvo recommends that oil changes are carried out at an authorised Volvo workshop.
372
10 Specifications
Engine oil
Engine oil grade
Engine
Engine codeA
Recommended oil grade
Volume, incl. oil filter
10
(litres)
T3
B4164T3
Certified and factory-filled oil: Oil grade WSS-M2C925-A
approx. 4.1
options for service:
T4
B4164T
Oil grade: ACEA A5/B5
approx. 4.1
Viscosity: SAE 5W–30
Oil grade: ACEA A5/B5
D2
D4162T
Viscosity: SAE 5W–30
approx. 3.8
When driving under adverse conditions, use ACEA A5/B5 SAE 0W-30.
A
D3
D5204T6
Oil grade: ACEA A5/B5
approx. 5.9
D4
D5204T4
Viscosity: SAE 0W–30
approx. 5.9
Engine code, component and serial number can be read on the engine, see page 366.
For filling engine oil, see page 329.
373
10 Specifications
Fluids and lubricants
Coolant
10
EngineA
Prescribed grade: Coolant recommended by
Volvo mixed with 50% water1, see the packaging.
EngineA
T3
D4162T
Volume
D3
D5204T6
(litres)
D4
D5204T4
10.0
8.0
A
7.0
T4
(litres)
D2
B4164T3
Volume
Engine code, component and serial number can be read on
the engine, see page 366.
B4164T
Other fluids and lubricants
Manual gearbox
Volume (litres)
B6
1.6
M66
1.9
Prescribed transmission fluid
BOT 350M3
Automatic gearbox
TF-80SD
1
374
Water quality must fulfil the standard STD 1285.1.
Volume (litres)
7.0
Prescribed transmission fluid
AW1
10 Specifications
Fluids and lubricants
NOTE
Under normal driving conditions, the gearbox oil does not need to be changed during
its service life. However, it may be necessary under adverse driving conditions, see
page 372.
10
Fluid
System
Brake fluid
Brake system
0.6
DOT 4+
Washer fluid
Cars with headlamp washing
5.5
Cars without headlamp washing
3,2
Washer fluid recommended by Volvo - with frost protection during cold
weather and below freezing point.
Fuel
Volume (litres)
Prescribed grade
T3, T4
approx. 62
Petrol: see page 291
D2
approx. 52
Diesel: see page 292
D3, D4
approx. 60
Compressor oil
Air conditioning
0,11
PAG oil
Coolant
Air conditioning
0,65 kg
R134a
WARNING
The air conditioning system contains pressurised refrigerant R134a. This system must
only be serviced and repaired by an authorised workshop.
375
10 Specifications
Fuel
CO2 emissions and fuel consumption
10
A
B
376
T3
158
6.8
106
4.6
125
5.4
T4
164
7.0
109
4.7
129
5.5
D2A
105
4.0
88
3.4
94
3.6
D2B
110
4.2
93
3.6
99
3.8
D3
139
5.3
100
3.8
114
4.3
D3
179
6.9
112
4.3
136
5.2
D4
139
5.3
100
3.8
114
4.3
D4
179
6.9
112
4.3
136
5.2
94 g/km CO2 version, max tyre width 205.
99 g/km CO2 version.
10 Specifications
Fuel
Explanation
gram/km
litre/100 km
Urban driving
Extra-urban driving
Combined driving
This, as well as how heavily the car is loaded,
increases fuel consumption and carbon dioxide emissions.
To bear in mind
There are several reasons for increased fuel
consumption compared with the table's values. Examples of this are:
• Drive gently and avoid unnecessary accel-
• The driver's driving style.
• If the customer has specified wheels larger
than those fitted as standard on the model's basic version, then resistance increases.
• High speed results in increased wind resistance.
NOTE
If the consumption and emission data is
missing then it is included in the enclosed
supplement.
Fuel consumption and emissions of
carbon dioxide
Fuel consumption and emission values in the
table above are based on specific EU cycles1,
that apply to cars with kerb weight in the basic
version and without extra equipment. The car's
weight may increase depending on equipment.
1
• Fuel quality, road and traffic conditions,
weather and the condition of the car.
Tips that the driver can use in order to reduce
consumption:
10
eration as well as braking too hard.
• Drive with the correct air pressure in the
tyres and check this regularly - select ECO
tyre pressure for best results, see the tyre
pressure table on page 378.
• Choice of tyres can affect fuel consumption - seek advice on suitable tyres from a
dealer.
See further information and more advice on
pages 11 and 286.
See page 291 for general information on fuel.
Even a combination of the above-mentioned
examples can result in significantly improved
consumption. For further information, please
refer to the regulations referred to1.
Large deviations in fuel consumption may arise
in a comparison with the EU driving cycles1
which are used in the certification of the car
and on which the consumption figures in the
table are based.
Official fuel consumption figures are based on two standardised driving cycles in a laboratory environment ("EU driving cycles") all in accordance with EU Directive 80/1268/EEC (Euro 4), EU Regulation
no 692/2008, 715/2007 (Euro 5) and UN ECE Regulation no 101.The regulations cover the driving cycles for city driving and driving on main roads. - City driving - the measurement starts with cold
starting the engine. The driving is simulated. - Driving on main roads - the car is accelerated and braked at speeds between 0-120 km/h. The driving is simulated. - Cars with manual transmission
are started in 2nd gear. The value for combined driving, which is reported in the table, is a combination of city driving and driving on main roads, in accordance with legal requirements. CO2 emissions
- the exhaust gases are collected in order to calculate the carbon dioxide emissions during the two driving cycles. These are then analysed and give the value for CO2 emissions.
377
10 Specifications
Wheel and tyres, dimensions and pressure
Approved tyre pressures
10
Engine
Tyre size
Speed
(km/h)
195/65 R15
T3
205/55 R16
T4
205/50 R17
D2
225/45 R17
Load, 1 - 3 persons
Max. load
ECO pressureA
Front
Rear
Front
Rear
Front/rear
(kPa)B
(kPa)
(kPa)
(kPa)
(kPa)
0 - 160
230
230
260
260
260
160 +
230
230
260
260
-
0 - 160
230
230
260
260
260
160 +
290
240
310
270
-
0 - 160
240
240
260
260
260
160 +
290
240
310
270
-
max. 80
420
420
420
420
-
225/40 R18
205/55 R16
205/50 R17
D3
225/45 R17
D4
225/40 R18
Temporary Spare Tyre
A
B
Economical driving.
In certain countries there is the "bar" unit beside the SI unit "Pascal": 1 bar = 100 kPa.
NOTE
All engines, tyres or combinations of these
are not always available in all markets.
378
10 Specifications
Electrical system
Electrical system
The car has a voltage-regulated AC alternator.
The electrical system is single-pole and uses
the chassis and engine casing as a conductor.
The battery capacity is dependent upon the
equipment level in the vehicle.
IMPORTANT
If the battery is replaced, take care to
replace it with a battery with the same cold
starting capacity and reserve capacity as
the original battery (see the label on the battery).
10
Battery
Engine
Cold start capacity,
Reserve capacity
CCA - Cold Cranking Amperes (A)
(minutes)
Petrol
12
520–800
100–160
Diesel
12
700–800
135–160
12
760A
135
Petrol/Diesel with Start/Stop function
A
Voltage (V)
Battery type AGM (Absorbed Glass Mat) must be used in cars with the Start/Stop function.
NOTE
•
The battery's container size should be
consistent with the original battery's
dimensions.
•
The battery's height is different depending on size.
Eco Start/Stop DRIVe*
For information on batteries in cars with
Eco Start/Stop DRIVe, see page 345.
* Option/accessory, for more information, see Introduction.
379
10 Specifications
Type approval
10
Remote control key system
Country
Lock system, standard
China
Country
Radar system
Country
Singapore
EU, China
IDA: Infocomm Development
Authority of Singapore.
Hong Kong
Brazil
Keyless lock system (Keyless drive)
Country
EU
Korea
380
10 Specifications
Type approval
BluetoothŸ
Declaration of Conformity (Declaration of Conformity)
10
Country
Countries
in the EU:
Exporting country: Japan
Manufacturer: Alpine Electronics Inc.
Type of equipment: BluetoothŸ device
For further information visit http://ec.europa.eu/enterprise/rtte/faq.htm #informing
``
381
10 Specifications
Type approval
Country
10
382
Czech
Republic:
Alpine Electronics, Inc. tímto prohlašuje, že tento BluetoothŸ Module je ve shodě se základními požadavky a dalšími příslušnými
ustanoveními směrnice 1999/5/ES.
Denmark:
Undertegnede Alpine Electronics, Inc. erklærer herved, at følgende udstyr BluetoothŸ Module overholder de væsentlige krav og øvrige
relevante krav i direktiv 1999/5/EF.
Germany:
Hiermit erklärt Alpine Electronics, Inc., dass sich das Gerät BluetoothŸ Module in Übereinstimmung mit den grundlegenden
Anforderungen und den übrigen einschlägigen Bestimmungen der Richtlinie 1999/5/EG befindet.
10 Specifications
Type approval
Country
Estonia:
Käesolevaga kinnitab Alpine Electronics, Inc. seadme BluetoothŸ Module vastavust direktiivi 1999/5/EÜ põhinõuetele ja nimetatud
direktiivist tulenevatele teistele asjakohastele sätetele.
UK
Hereby, Alpine Electronics, Inc., declares that this BluetoothŸ Module is in compliance with the essential requirements and other
relevant provisions of Directive 1999/5/EC.
Spain:
Por medio de la presente Alpine Electronics, Inc. declara que el BluetoothŸ Module cumple con los requisitos esenciales y cualesquiera
otras disposiciones aplicables o exigibles de la Directiva 1999/5/CE.
Greece:
ΜΕ ΤΗΝ ΠΑΡΟΥΣΑ Alpine Electronics, Inc. ΔΗΛΩΝΕΙ ΟΤΙ BluetoothŸ Module ΣΥΜΜΟΡΦΩΝΕΤΑΙ ΠΡΟΣ ΤΙΣ ΟΥΣΙΩΔΕΙΣ ΑΠΑΙΤΗΣΕΙΣ
ΚΑΙ ΤΙΣ ΛΟΙΠΕΣ ΣΧΕΤΙΚΕΣ ΔΙΑΤΑΞΕΙΣ ΤΗΣ ΟΔΗΓΙΑΣ 1999/5/ΕΚ.
France:
Par la présente Alpine Electronics, Inc. déclare que l'appareil BluetoothŸ Module est conforme aux exigences essentielles et aux autres
dispositions pertinentes de la directive 1999/5/CE.
Italy:
Con la presente Alpine Electronics, Inc. dichiara che questo BluetoothŸ Module è conforme ai requisiti essenziali ed alle altre
disposizioni pertinenti stabilite dalla direttiva 1999/5/CE.
Latvia:
Ar šo Alpine Electronics, Inc. deklarē, ka BluetoothŸ Module atbilst Direktīvas 1999/5/EK būtiskajām prasībām un citiem ar to
saistītajiem noteikumiem.
Lithuania:
Šiuo Alpine Electronics, Inc. deklaruoja, kad šis BluetoothŸ Module atitinka esminius reikalavimus ir kitas 1999/5/EB Direktyvos
nuostatas.
Netherlands:
Hierbij verklaart Alpine Electronics, Inc. dat het toestel BluetoothŸ Module in overeenstemming is met de essentiële eisen en de andere
relevante bepalingen van richtlijn 1999/5/EG.
Malta:
Hawnhekk, Alpine Electronics, Inc., jiddikjara li dan BluetoothŸ Module jikkonforma mal-ĘtiĒijiet essenzjali u ma provvedimenti oĘrajn
relevanti li hemm fid-Dirrettiva 1999/5/EC.
Hungary:
Alulírott, Alpine Electronics, Inc. nyilatkozom, hogy a BluetoothŸ Module megfelel a vonatkozó alapvetõ követelményeknek és az
1999/5/EC irányelv egyéb elõírásainak.
10
``
383
10 Specifications
Type approval
Country
10
384
Poland:
Niniejszym Alpine Electronics, Inc. oświadcza, że BluetoothŸ Module jest zgodny z zasadniczymi wymogami oraz pozostałymi
stosownymi postanowieniami Dyrektywy 1999/5/EC.
Portugal:
Alpine Electronics, Inc. declara que este BluetoothŸ Module está conforme com os requisitos essenciais e outras disposições da
Directiva 1999/5/CE.
Slovenia:
Alpine Electronics, Inc. izjavlja, da je ta BluetoothŸ Module v skladu z bistvenimi zahtevami in ostalimi relevantnimi določili direktive
1999/5/ES.
Slovakia:
Alpine Electronics, Inc. týmto vyhlasuje, že BluetoothŸ Module spĺňa základné požiadavky a všetky príslušné ustanovenia Smernice
1999/5/ES.
Finland:
Alpine Electronics, Inc. vakuuttaa täten että BluetoothŸ Module tyyppinen laite on direktiivin 1999/5/EY oleellisten vaatimusten ja sitä
koskevien direktiivin muiden ehtojen mukainen.
Sweden:
Härmed intygar Alpine Electronics, Inc. att denna BluetoothŸ Module står I överensstämmelse med de väsentliga egenskapskrav och
övriga relevanta bestämmelser som framgår av direktiv 1999/5/EG.
Iceland:
Alpine Electronics, Inc. hereby certifies that this BluetoothŸ Module conforms to the essential characteristic requirements and other
relevant regulations of directive 1999/5/EC.
Norway:
Alpine Electronics, Inc. erklærer herved at utstyret BluetoothŸ Module er i samsvar med de grunnleggende krav og øvrige relevante
krav i direktiv 1999/5/EF.
10 Specifications
Type approval
Country
China:
㄀कϝᴵǂ䖯ষ੠⫳ѻॖଚ೼݊ѻકⱘ䇈ᯢк៪Փ⫼᠟‫ݠ‬Ёˈᑨߞॄϟ䗄᳝݇‫ݙ‬ᆍ˖
10
ᷛᯢ䰘ӊЁ᠔㾘ᅮⱘᡔᴃᣛᷛ੠Փ⫼㣗ೈˈ䇈ᯢ᠔᳝᥻ࠊǃ䇗ᭈঞᓔ݇ㄝՓ⫼ᮍ⊩˗
ƵՓ⫼乥⥛˖*+]
Ƶㄝᬜܼ৥䕤ᇘࡳ⥛(,53˖໽㒓๲Ⲟ˘ G%L ᯊ˖싨P:៪싨G%Pǂķ
Ƶ᳔໻ࡳ⥛䈅ᆚᑺ˖໽㒓๲Ⲟ˘ G%L ᯊ˖싨G%P0+](,53ķ
Ƶ䕑乥ᆍ䰤˖SSP
Ƶᴖᬷথᇘ䕤ᇘࡳ⥛ᇍᑨ䕑⊶f ‫ֵס‬䘧ᏺᆑҹ໪˖
•
•
•
•
•
싨G%PN+]0+]
싨G%PN+]*+]
싨G%P0+]*+]
싨G%P0+]*+]
싨G%P0+]݊ᅗ *+]
ϡᕫ᪙㞾᳈ᬍথᇘ乥⥛ǃࡴ໻থᇘࡳ⥛ࣙᣀ乱໪ࡴ㺙ᇘ乥ࡳ⥛ᬒ໻఼ˈϡᕫ᪙㞾໪᥹໽㒓៪ᬍ⫼݊ᅗথᇘ໽㒓˗
Փ⫼ᯊϡᕫᇍ৘⾡ড়⊩ⱘ᮴㒓⬉䗮ֵϮࡵѻ⫳᳝ᆇᑆᡄ˗ϔᮺথ⦄᳝ᑆᡄ⦄䈵ᯊˈᑨゟे‫ذ‬ℶՓ⫼ˈᑊ䞛প᥾ᮑ⍜䰸ᑆᡄৢᮍৃ㒻㓁
Փ⫼˗
Փ⫼ᖂࡳ⥛᮴㒓⬉䆒໛ˈᖙ乏ᖡফ৘⾡᮴㒓⬉Ϯࡵⱘᑆᡄ៪ᎹϮǃ⾥ᄺঞए⭫ᑨ⫼䆒໛ⱘ䕤ᇘᑆᡄ˗
ϡᕫ೼亲ᴎ੠ᴎഎ䰘䖥Փ⫼DŽ
``
385
10 Specifications
Type approval
Country
10
Taiwan:
‫܅‬㧤෷ሽंᘿ୴ࢤሽᖲጥ෻䏺ऄรԼ㦕
รԼԲය
ᆖী‫ڤ‬ᎁᢞ‫ٽ‬௑հ‫פ܅‬෷୴᙮ሽᖲΔॺᆖ๺‫ױ‬Δֆ‫׹‬Ε೸ᇆࢨࠌ‫݁ृش‬լ൓ᖐ۞!᧢‫ޓ‬᙮෷Ε‫ף‬Օ‫פ‬෷ࢨ᧢‫଺ޓ‬๻ૠհ௽ࢤ֗‫פ‬౨Ζ
รԼ؄ය
‫פ܅‬෷୴᙮ሽᖲհࠌ‫ش‬լ൓ᐙ᥼ଆ౰‫ڜ‬٤֗եឫ‫ٽ‬ऄຏॾΙᆖ࿇෼‫ڶ‬եឫ෼ွழΔ!ᚨ‫ܛم‬ೖ‫ش‬Δࠀ‫ޏ‬࿳۟ྤեឫழֱ൓ᤉᥛࠌ‫ش‬Ζছႈ
‫ٽ‬ऄຏॾΔਐࠉሽॾऄ๵ࡳ!‫܂‬ᄐհྤᒵሽຏॾΖ‫פ܅‬෷୴᙮ሽᖲႊ‫ٽ࠹ݴ‬ऄຏॾࢨՠᄐΕઝᖂ֗᠔᛭‫ش‬ሽं!ᘿ୴ࢤሽᖲ๻ໂհեឫΖ
CCAB10LP0230T7
386
10 Specifications
Type approval
Country
South
Korea:
⭧㟓#⭠‿
10
Volvo Car Korea
㐔㷡㣄G䂈☐aGuY\TphtYXWX}
㥐䖼G⮹aGi“œŒ›––›Ghœ‹–GuˆŽˆ›–•Gyˆ‹–
⯜⒬G⮹aGphtYUX
㇤G⇔㬐aGtˆ™ŠVYWXW
Alpine Electronics, Inc
Made in Japan
ါཨ#⭠‿
Volvo Car Korea
⸰⸨㣄┍㵜䂈⫠㙸
㉐㟬㐐G㟝㇤ẠG䚐⇜ Y ┍G^Y]TX^ZG⸰⸨⾀♝G[ 㽩
⸰⸨㣄┍㵜GḔᵑ㉰䉤GX\__TX^^^
http://www.volvocars.com/kr
⏷⧴⫛#ⱇ⪣⏷㢸
୔␭䚨Gⱨ㉔㉘⽸⏈G㤸䑀䝰㐔Gᴴ⏙㉥㢨G㢼㡰⳴⦐G㢬⮹㙼㤸ḰGḴ⥜═G㉐⽸㏘⏈G䚔G㍌G㛺㏩⏼␘
``
387
10 Specifications
Type approval
Country
10
Singapore:
The United Arab
Emirates:
Jordan:
The product that contains the Bluetooth module is approved with the following certification number.
BT module certification number: TRC/LPD/2010/4.
BT module name: IAM2.1BT PWB EU
388
10 Specifications
Type approval
Country
10
South
Africa:
Uruguay:
This product contains URSEC approved transmitter [module name and model name (IAM2.1 BT PWB EU + BVJG905A, BVVE905A,
BVLV905A)]
``
389
10 Specifications
Type approval
Country
10
Jamaica:
Approved for use in Jamaica SMA EI: IAM2.1
Thailand:
This telecommunication equipment conforms to NTC technical requirement.
Nigeria:
Mexico:
Warning
"Este equipo opera a titulo secundario, consecuentemente, debe aceptar interferencias perjudiciales incluyendo equipos de la misma
clase y puede no causar interferencias a sistemas operando a titulo primario."
BluetoothŸ module installation information
This module board is to be installed only by the professional line operator and used only for car audio produced by ALPINE ELECTRONICS, INC. When this BluetoothŸ Module Board is installed in the Car Audio, we shall consider the following points: 1. Since
"IAM2.1 BT PWB US" owns its FCC ID/IC Number, we shall affix an exterior label on the outside of the product if the FCC ID is not
visible. The exterior label shall use wording such as either "Contains Transmitter Module Board FCC ID: A269ZUA130 / IC: 700BIAM2101" or "Contains FCC ID: A269ZUA130 / IC: 700B-IAM2101". 2. "IAM2.1 BT PWB US" complies with requirements of subsections
15.19(a)(3) in FCC Rules Part 15 Subpart C. The manual statement 15.19 (a)(3) is included in User Guide of the product.
COFETEL No. RCPALIA10-0353
390
10 Specifications
Type approval
Country
Botswana:
10
Croatia:
391
10 Specifications
Symbols in the display
General
10
There are a variety of different symbols in the
display in the car. The symbols are divided into
warning, indicator and information symbols.
Shown below are the most common symbols
with their meanings and a reference to where
in the manual further information can be found.
For more information on symbols and text
messages, see pages 71 and 200 .
Symbols in the display
Warning symbols in the combined
instrument panel
Symbol
- Red warning symbol, illuminates when
a fault has been indicated which could affect
the safety and/or driveability of the car. At the
same time an explanatory text is displayed in
the information display.
- Information symbol, illuminates in
combination with text in the information display, when a deviation in any of the car's systems has occurred. The yellow symbol information can also illuminate in combination with
other symbols.
392
* Option/accessory, for more information, see Introduction.
Meaning
Page
Low oil pressure
73
Parking brake
applied
73, 131
Parking brake
applied, alternative symbol
73
Airbags - SRS
17, 73
Seatbelt
reminder
14, 73
Alternator not
charging
73
Fault in the
brake system
73, 130
Warning,
safety mode
17, 28, 73, 119
Indicator symbols in the combined
instrument panel
Symbol
Meaning
Page
Fault in the ABL
system*
72, 91
Emissions system
72
Fault in the ABS
system
72, 130
Rear fog lamp on
72, 92
Stability system,
DSTC, Trailer
stability assist*
72, 139,
304
Stability system,
sport mode
72, 139
Engine preheater (diesel)
72
Low level in fuel
tank
72, 224
Information,
read display text
72
Main beam on
72, 89
10 Specifications
Symbols in the display
Meaning
Page
Left-hand direction indicators
72
Right-hand
direction indicators
72
DRIVe - Start/
Stop*, engine
auto-stopped
72, 123
Information symbols in the combined
instrument panel
Symbol
Meaning
Page
Main beam with
auto dimming AHB*
89
Camera sensor*
89
Adaptive cruise
control*
156
Adaptive cruise
control*
149, 150,
156
Symbol
Meaning
Page
Symbol
Adaptive cruise
control*, Distance
Warning* (Distance
Alert)
150, 158
Adaptive cruise
control*
156
Adaptive cruise
control*
149
Adaptive cruise
control*
149
Cruise control*
145
Radar sensor*
156, 160,
173
Start/Stop*, Adaptive cruise control*
127, 156
Speed limiter
143
G025102
Symbol
Meaning
Page
Camera sensor*,
Laser sensor*
165, 173,
178, 183
Auto Brake*, Distance Warning*
(Distance Alert),
City SafetyTM, Collision warning system*
160, 165,
173
Fuel-driven engine
block heater and
passenger compartment heater*
224
ABL system*
91
Fuel filler flap, righthand side
289
Low battery
224
Park Assist Pilot PAP*
190
10
``
* Option/accessory, for more information, see Introduction.
393
10 Specifications
Symbols in the display
Symbol
10
Meaning
Page
Rain sensor*
99
Lane Keeping Aid*
182
Driver Alert System*
Symbol
Meaning
Page
Registered speed
information*
141
Oil level measurement
331
178
Information symbols in the roof console
display
Driver Alert System*, Lane Keeping
Aid*
183
Driver Alert System*, Time for a
break
176, 178,
183
Gear indicator,
manual gearbox
115
Automatic gear
positions
394
Symbol
116
* Option/accessory, for more information, see Introduction.
Meaning
Page
Seatbelt reminder
16
Airbag, passenger
seat, activated
21
Airbag, passenger
seat, deactivated
21
10 Specifications
10
395
11 Alphabetical Index
A
ACC – Adaptive cruise control................. 147
Active Bending Lights (ABL)...................... 91
Active Park Assist.................................... 190
11
Active Xenon headlamps........................... 91
Adaptive cruise control............................ 147
fault tracing......................................... 155
radar sensor........................................ 154
Additional heater (Diesel)......................... 227
Adjusting headlamp pattern...................... 95
halogen headlamp................................ 96
Adjusting the steering wheel...................... 86
Airbag
activating/deactivating, PACOS........... 20
driver's and front passenger side......... 18
key switch off........................................ 20
AIRBAG ..................................................... 18
Airbag system ........................................... 17
Air conditioning........................................ 219
general................................................ 212
Air conditioning, AC................................. 219
Air conditioning system
repair................................................... 334
Air distribution.................................. 213, 221
396
Air quality system IAQS .......................... 220
Automatic car washes............................. 357
Air vents................................................... 214
Automatic gearbox..................................
manual gear positions (Geartronic).....
towing and recovery...........................
trailer...................................................
Alarm..........................................................
alarm indicator......................................
alarm signals.........................................
arming...................................................
checking the alarm...............................
deactivate.............................................
deactivating a triggered alarm..............
reduced alarm level..............................
61
61
62
61
45
61
61
62
116
117
305
300
Automatic locking...................................... 55
Automatic relocking................................... 54
Auxiliary heater........................................ 227
AUX input......................................... 241, 261
Alcolock................................................... 108
Allergy and asthma inducing substances. 213
Approach light, duration...................... 44, 95
B
Audio
settings............................................... 245
surround..................................... 240, 245
Backrest..................................................... 81
front seat, lowering............................... 81
Audio system........................................... 240
functions............................................. 245
overview.............................................. 241
Bag holder .............................................. 295
Audio volume ..........................................
phone..................................................
phone/media player............................
ring signal, phone...............................
speed/noise compensation................
241
270
270
270
245
Auto
climate control settings...................... 218
Backrest rear seat, lowering...................... 84
Battery............................................. 344, 379
maintenance....................................... 344
remote control ................................... 283
remote control key/PCC....................... 48
start assistance................................... 114
symbols on the battery....................... 345
warning symbols................................. 345
Blind spot (BLIS)...................................... 195
BLIS......................................................... 194
11 Alphabetical Index
BluetoothŸ
handsfree ...........................................
media .................................................
microphone off ..................................
streaming audio .................................
transfer call to mobile ........................
267
264
270
264
270
Bonnet, opening...................................... 328
C
Calls
incoming............................................. 269
operation............................................. 269
Camera sensor................................ 162, 171
Car care................................................... 357
Brake and clutch fluid.............................. 333
Car care, leather upholstery.................... 359
Brake light.................................................. 92
Cargo area
Cargo net............................................ 297
lighting.................................................. 94
loading................................................ 294
mounting points.................................. 295
Parcel shelf......................................... 298
Brakes...................................................... 129
anti-lock braking system, ABS........... 129
brake light............................................. 92
brake system...................................... 129
Emergency Brake Assistance, EBA ... 129
emergency brake lights........................ 92
filling brake fluid.................................. 333
handbrake........................................... 131
symbols in the combined instrument
panel................................................... 130
Bulbs, see Lighting.................................. 335
location in the car................................. 31
safety.................................................... 31
Child safety locks...................................... 60
Child seat................................................... 31
Child seats.................................................
ISOFIX fixture system for child seats. . .
recommended......................................
size classes for child seats with the ISOFIX fixture system.................................
upper mounting points for child seats..
31
35
32
35
38
Cigarette lighter socket............................ 235
City Safety™............................................ 161
Catalytic converter................................... 291
recovery.............................................. 306
Cleaning
automatic car washes.........................
car wash.............................................
rims.....................................................
seatbelts.............................................
upholstery...........................................
CD ........................................................... 257
Clean Zone Interior Package (CZIP)........ 213
Centre console........................................ 203
Climate control........................................ 212
general................................................ 212
sensors............................................... 212
Car upholstery......................................... 359
Car wash.................................................. 357
Checking and topping up the coolant..... 332
Checking the engine oil level................... 329
Children..................................................... 31
child safety locks.................................. 35
child seats and side airbags................. 22
11
357
357
358
360
359
Clock, setting............................................. 75
CO2 emissions ........................................ 376
Collision..................................................... 28
397
11 Alphabetical Index
Collision warning............................. 167, 168
11
Driving in water........................................ 286
Collision warning system
radar sensor........................ 154, 161, 167
DAB Radio............................................... 254
Collision Warning with Auto Brake*......... 167
Daytime running lights............................... 88
Colour code, paint................................... 361
Deadlock
deactivation.......................................... 58
temporary deactivation......................... 58
Combined instrument panel.............. 69, 200
Comfort inside the passenger compartment......................................................... 234
Compass................................................. 107
calibration........................................... 107
Driving with a trailer
towball load........................................ 369
towing capacity.................................. 369
DSTC, see also Stability control system.. 139
DVD ......................................................... 257
Deadlocks.................................................. 58
Defroster.................................................. 219
Diesel....................................................... 292
Condensation in headlamps.................... 357
Diesel particle filter.................................. 293
controls
centre console ................................... 241
Dipstick, electronic.................................. 331
Controls
centre console.................................... 203
Disengaging the gear selector inhibitor... 118
Direction indicators.................................... 93
Display lighting.......................................... 87
Controls, lights........................................... 87
Distance Warning.................................... 158
Control symbols......................................... 71
Dolby Surround Pro Logic II.................... 240
E
ECC, electronic climate control............... 215
EcoGuide................................................. 121
Economical driving.................................. 286
ECO pressure.......................................... 318
Eco Start/Stop DRIVe.............................. 123
Electrical socket...................................... 236
cargo area........................................... 296
front seat............................................. 236
Cooling system........................................ 286
Door mirrors............................................. 104
Corner Traction Control .......................... 138
Driver Alert Control.................................. 176
Crash, see Collision................................... 28
Driver Alert System.................................. 175
Emergency puncture repair..................... 320
Driving......................................................
cooling system....................................
with the tailgate open.........................
with trailer...........................................
Emissions of carbon dioxide................... 293
Cruise control.......................................... 145
CZIP (Clear Zone Interior Package)......... 213
398
D
286
286
287
299
Emergency equipment
warning triangle.................................. 319
Engine
overheating......................................... 299
starting................................................ 112
11 Alphabetical Index
Engine block heater
fuel-driven........................................... 223
Engine compartment
coolant................................................ 332
oil........................................................ 329
overview.............................................. 329
Engine drag control ................................ 138
Engine oil......................................... 329, 372
adverse driving conditions.................. 372
capacities........................................... 372
filter..................................................... 329
oil grade.............................................. 372
Engine specifications............................... 371
Environmental labelling, FSC, owner's
manual....................................................... 11
Error messages
Adaptive Cruise Control.....................
Driver Alert Control.............................
LKA.....................................................
see Messages and symbols...............
156
178
183
156
F
Fan........................................................... 217
Fault tracing for the camera sensor. 163, 172
First aid equipment.................................. 319
First aid kit .............................................. 319
Fluids, capacities..................................... 374
Fluids and oils.......................................... 374
Foot brake............................................... 129
Gear selector inhibitor, mechanical disengagement................................................. 118
Front seat
head restraint........................................ 81
Geartronic................................................ 117
FSC, environmental labelling..................... 11
Glass
laminated/reinforced........................... 102
Fuel..........................................................
fuel consumption................................
fuel economy......................................
fuel filter..............................................
291
376
318
292
ETC, electronic temperature control ....... 216
Fuse box.................................................. 348
Expectant mothers, seatbelt...................... 15
Fuses....................................................... 348
changing............................................. 348
engine compartment.......................... 349
11
Gearbox................................................... 115
automatic............................................ 116
manual................................................ 115
Gear selector inhibitor............................. 118
Error messages in Distance Alert............ 160
External dimensions................................ 368
G
Fog lamps
rear........................................................ 92
Fuelling
fuel filler flap....................................... 289
fuel filler flap, locking............................ 57
Error messages in BLIS........................... 197
general................................................ 348
under front right seat.......................... 355
under glovebox................................... 352
Glass roof, roller blind.............................. 106
Global opening........................................ 212
Glovebox................................................. 236
locking.................................................. 56
Gross vehicle weight............................... 369
GSI - Gear selector assistance................ 115
399
11 Alphabetical Index
H
Horn........................................................... 86
Handbrake............................................... 131
Hazard warning flashers............................ 92
Headlamp levelling.................................... 87
11
Headlamp pattern, adjusting..................... 95
Headlamp pattern adjustment
Active Bending Lights .......................... 96
Headlamps............................................... 335
head restraint
front seat............................................... 81
Head restraint
centre seat, rear.................................... 83
lowering................................................ 84
Heating....................................................
rearview and door mirrors..................
rear window........................................
seats...................................................
218
105
105
217
Intermittent wiping..................................... 99
I
iPodŸ, connection................................... 261
IAQS – Interior Air Quality System........... 213
Ignition keys............................................... 79
J
Immobiliser................................................ 43
Journey statistics..................................... 232
IC – Inflatable Curtain................................ 24
Indicator lamps, PCC................................ 45
Information button, PCC............................ 45
K
Information displays.................................. 69
Kerb weight.............................................. 369
Inflatable curtain........................................ 24
Infotainment system ...............................
menus ................................................
overview .............................................
source buttons ...................................
voice control.......................................
240
243
241
241
275
Heat-reflecting windscreen...................... 102
Inlaid mats............................................... 236
High engine temperature......................... 299
Instrument lighting, see Lighting................ 87
High-pressure headlamp washing........... 100
Instrument overview
left-hand drive....................................... 66
right-hand drive.................................... 68
HomeLinkŸ .............................................. 132
Home safe lighting..................................... 95
Hoot........................................................... 86
Instruments and controls........................... 66
Interior lighting, see Lighting..................... 93
400
Interior rearview mirror............................. 106
automatic dimming............................. 106
Key............................................................. 42
Key blade................................................... 46
Keyless drive...................................... 50, 112
Keyless start (keyless drive)............... 50, 112
Keypad in the steering
wheel................................. 86, 145, 204, 241
Key positions............................................. 79
11 Alphabetical Index
L
Labels...................................................... 366
Laminated glass....................................... 102
Lamps, see Lighting................................ 335
Lane keeping assistant - LKA.................. 180
Laser sensor............................................ 164
Leather upholstery, washing instructions 359
Lighting.................................................... 335
Active Xenon headlamps...................... 91
approach light, duration................. 44, 95
automatic lighting, passenger compartment...................................................... 94
bulbs, specifications........................... 340
controls................................................. 93
daytime running lights.......................... 88
display lighting...................................... 87
headlamp levelling................................ 87
home safe lighting................................ 95
in passenger compartment................... 93
instrument lighting................................ 87
main/dipped beam............................... 87
position/parking lamps......................... 92
rear fog lamp........................................ 92
tunnel detection.................................... 90
Lighting, bulb replacement...................... 335
daytime running lights........................ 338
dipped beam (cars with halogen headlamps)................................................. 336
direction indicators, front.................... 337
main beam (cars with active xenon
headlamps)......................................... 337
main beam (cars with halogen headlamps)................................................. 337
position/parking lamps....................... 338
rear bulb holder: direction indicators,
brake lamps and reversing lamps...... 339
rear fog lamps..................................... 339
side marker lamps, front..................... 338
vanity mirror........................................ 340
Locks
automatic locking................................. 54
locking.................................................. 54
unlocking.............................................. 54
Light switches............................................ 87
Making calls............................................. 269
LKA - Lane keeping assistant.................. 180
Manual gearbox....................................... 115
GSI - Gear selector assistance........... 115
towing and recovery........................... 305
Loading
cargo area...........................................
general................................................
mounting points..................................
roof load.............................................
294
294
295
294
Lock confirmation ..................................... 42
Locking/unlocking
inside.................................................... 54
tailgate.................................................. 56
Lubricants................................................ 374
Lubricants, capacities.............................. 374
11
M
Main/dipped beam, see Lightning............. 87
Main beam, automatic activation.............. 89
Maintenance
rustproofing........................................ 359
Manual gear positions (Geartronic).......... 117
Max. roof load ......................................... 369
Media, BluetoothŸ ................................... 264
media player ........................................... 257
Memory function in seats.......................... 82
Menu navigation, Infotainment ............... 243
Menus/functions...................................... 205
401
11 Alphabetical Index
Menus and messages.............................. 200
register phone..................................... 268
voice control....................................... 275
Messages and symbols
Adaptive Cruise Control..................... 156
Collision Warning with Auto
Brake.......................................... 165, 173
Distance Alert..................................... 160
Driver Alert Control............................. 178
LKA..................................................... 183
Mood lighting............................................. 94
Parking assistance................................... 184
parking assistance sensors................ 186
MY CAR................................................... 203
Parking brake........................................... 131
Messages in BLIS.................................... 197
Oil level low.............................................. 329
Messages in the combined instrument
panel........................................................ 200
Overheating............................................. 299
Menu system MY CAR............................ 203
11
O
Oil, see also Engine oil............................. 372
Owner's manual, environmental labelling.. 11
Messages in the information display....... 139
Meters
fuel gauge............................................. 70
speedometer......................................... 70
tachometer........................................... 70
PACOS....................................................... 20
Microphone.............................................. 267
PACOS, switch.......................................... 20
Misting.....................................................
attending to the windows...................
condensation in headlamps...............
remove with the air vents...................
timer function......................................
Paintwork
colour code......................................... 361
damage and touch-up........................ 361
219
212
357
221
220
Mobile phone
connect............................................... 268
handsfree............................................ 267
402
Park assist camera.................................. 187
P
Panel lighting............................................. 87
Panic function............................................ 44
PAP - Active Park Assist.......................... 190
Parcel shelf.............................................. 298
Parking heater..........................................
battery and fuel...................................
parking on a hill..................................
time setting.........................................
223
223
223
225
Passenger compartment......................... 234
Passenger compartment filter................. 212
Passenger compartment heater
fuel-driven........................................... 223
Passenger compartment lighting
automatic.............................................. 94
PCC – Personal Car Communicator
functions............................................... 44
range............................................... 45, 46
Pedestrian protection.............................. 167
Petrol grade............................................. 291
Phone
connect...............................................
handsfree............................................
incoming calls.....................................
making calls........................................
phone book.........................................
268
267
269
269
271
11 Alphabetical Index
phone book, shortcut.........................
receiving a call....................................
register phone.....................................
voice control.......................................
271
270
268
275
Pocket park assist - PAP......................... 190
Polishing.................................................. 358
Position/parking lamps.............................. 92
Power....................................................... 121
Power seat................................................. 82
Powershift gearbox.......................... 119, 305
Power windows....................................... 102
Rain sensor................................................ 99
Rear bulbs
location............................................... 339
Rearview and door mirrors
compass.............................................
door....................................................
electrically retractable.........................
heating................................................
interior.................................................
107
104
105
105
106
Rear window, defrosting.......................... 105
Recirculation............................................ 220
Recommendations during driving............ 286
Recommended child seats, table.............. 32
Q
Queue Assist............................................ 152
Queue Assistant....................................... 152
R
Radar sensor........................................... 147
limitations........................................... 154
Radio ...................................................... 250
AM/FM ............................................... 250
DAB ................................................... 254
detachable key blade........................... 46
functions............................................... 44
range..................................................... 45
Recovery.................................................. 307
Refrigerant............................................... 334
Refuelling........................................... 57, 289
fuel filler flap, manual opening............ 289
refuelling............................................. 289
Relay/fuse box: see Fuses....................... 348
Remote control ....................................... 282
battery replacement ........................... 283
Remote control, HomeLinkŸ
programmable ................................... 132
Remote control key................................... 42
battery replacement.............................. 48
Remote control key system, type approval............................................................ 380
Resetting the door mirrors....................... 105
11
Resetting the power windows................. 104
Retractable power door mirrors............... 105
Reverse gear inhibitor.............................. 115
Rims
cleaning.............................................. 358
Road sign information............................. 141
Roller blind for glass roof......................... 106
Roof load, max. weight ........................... 369
Rustproofing............................................ 359
S
Safety mode.............................................. 28
Seat, see Seats.......................................... 81
Seatbelt
rear seat................................................ 16
seatbelt tensioner................................. 16
Seatbelt reminder...................................... 16
403
11 Alphabetical Index
11
Seatbelts.................................................... 14
Start assistance....................................... 114
Seats.......................................................... 81
head restraints, rear.............................. 83
heating................................................ 217
lowering the front backrest................... 81
lowering the rear backrest.................... 84
power seats.......................................... 82
Steering force, speed related.................. 233
Steering lock............................................ 113
Tailgate
locking/unlocking.................................. 56
Temperature
actual temperature............................. 212
Steering wheel........................................... 86
keypad.......................... 86, 145, 204, 241
keypad, adaptive cruise control......... 149
steering wheel adjustment.................... 86
Temperature control................................ 218
Stone chips and scratches...................... 361
Total airing function........................... 55, 212
Service programme................................. 328
Storage spaces in the passenger compartment......................................................... 234
Set time interval....................................... 158
Surround.......................................... 240, 245
Towbar
detachable, attachment ..................... 302
detachable, removal .......................... 303
Side airbags............................................... 22
Symbols................................................... 139
indicator symbols................................. 71
warning symbols................................... 71
Securing loads (Loading)......................... 295
Sensus....................................................... 77
Service position....................................... 341
Signal input, external....................... 241, 261
SIPS bags.................................................. 22
Soot filter................................................. 293
Soot filter full............................................ 293
Spare wheel............................................. 314
Speed limiter............................................ 143
Symbols and messages
Adaptive Cruise Control..................... 156
Collision Warning with Auto
Brake.......................................... 165, 173
Distance Alert..................................... 160
Driver Alert Control............................. 178
LKA..................................................... 183
Timer........................................................ 220
Towbar, see Towing equipment.............. 300
Towing..................................................... 305
towing eye.......................................... 306
Towing capacity....................................... 369
Towing equipment................................... 300
specifications...................................... 301
Towing eye.............................................. 306
Stability and traction control system....... 138
Trailer.......................................................
cable...................................................
driving with a trailer............................
snaking...............................................
Stability system....................................... 138
Trailer stability assist .............................. 138
Stains....................................................... 359
Trailer Stability Assist.............................. 304
Spin control............................................. 138
Spin control function............................... 138
404
Steering force level, see Steering force... 233
T
299
299
299
304
11 Alphabetical Index
Transmission............................................ 115
Transponder............................................ 102
Trip computer.......................................... 229
Trip meter.................................................. 75
Troubleshooting
Adaptive Cruise Control..................... 155
U
Unlocking
from the inside...................................... 55
from the outside................................... 54
USB, connection...................................... 261
TV............................................................. 279
Type approval, remote control key system........................................................... 380
Type designation..................................... 366
Tyres
direction of rotation............................
driving characteristics.........................
maintenance.......................................
pressure..............................................
puncture repair...................................
specifications......................................
speed ratings......................................
tread wear indicators..........................
winter tyres.........................................
Warning sound
collision warning system.................... 169
11
Warning symbols....................................... 71
V
Warning triangle....................................... 319
Vanity mirror...................................... 94, 236
Washer fluid, filling................................... 343
Ventilation................................................ 213
Washers
rear window........................................ 100
washer fluid, filling.............................. 343
windscreen......................................... 100
Vibration damper..................................... 300
Voice control, mobile phone.................... 275
310
310
310
318
320
312
313
311
312
73
73
73
73
Warning symbol, airbag system................ 17
TSA - trailer stability assist ............. 138, 304
Tunnel detection........................................ 90
low oil pressure.....................................
parking brake applied...........................
seatbelt reminder..................................
warning.................................................
Volvo Sensus............................................. 77
Water and dirt-repellent coating.............. 102
Water-repellent surface, cleaning............ 358
W
Warning lamp
adaptive cruise control....................... 147
collision warning system.................... 169
stability and traction control system. . 138
Warning lamps
airbags SRS.......................................... 73
alternator not charging......................... 73
fault in brake system............................ 73
Waxing..................................................... 358
Weights
kerb weight......................................... 369
Wheels
changing.............................................
installation...........................................
rims.....................................................
snow chains........................................
spare wheel........................................
314
316
311
312
314
405
11 Alphabetical Index
Wheels and tyres..................................... 310
Whiplash injury, WHIPS............................. 25
WHIPS
child seat/booster cushion................... 25
whiplash injury...................................... 25
11
Windows, rearview and door mirrors....... 102
Windscreen
Heating....................................... 105, 219
Windscreen washing................................ 100
Windscreen wipers.................................... 99
rain sensor............................................ 99
Winter driving........................................... 287
Winter tyres.............................................. 312
Wiper blades............................................
changing.............................................
cleaning..............................................
replacing, rear window.......................
service position...................................
341
341
342
342
341
Wipers and washing.................................. 99
406
Kdakd8Vg8dgedgVi^dc51&OHMJTI
"51SJOUFEJO4XFEFO(zUFCPSH$PQZSJHIU©7PMWP$BS$PSQPSBUJPO
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement