108231

108231
Technical Bulletin
Part No. 108231 Rev. *
Procedure for Installation of Label Genesis:
To Install in Windows 3.1 or 3.11 or NT:
Please make certain no other applications are running while installing Label Genesis, this
includes the office shortcut toolbar. At the program manager, Select “File” then “Run”. At the
dialog box type “A:\SETUP” and follow the instructions. It is recommended that you install the
application in the default directory to avoid possible confusion for later support.
After the setup is complete, you must install the included fonts to insure proper operation of the
application. To install the fonts in Windows 3.1:
1.
2.
3.
Select the “Main” window in Program Manager, and select the “Control Panel” icon.
From Control Panel choose the “Fonts” icon and select “ADD”.
Use the “Directories” box to select the CWLABEL directory (or the directory you
installed the application to if different).
4.
The two fonts we use will be shown in the list, select the “Select All” tab and then select
“OK”. If either font is already installed with a newer version, the system will notify you.
You do not need to overwrite your version of the font if it exists.
You are now installed and can exit “Control Panel” and the “Main” window and are ready to
start the program.
To Install in Windows 95:
Please make certain no other applications are running while installing Label Genesis, this
includes the office shortcut toolbar.
At the task bar click on the “Start” button and select
“Run”. At the dialog box type “A:\SETUP” and follow the instructions. It is recommended
that you install the application in the default directory to avoid possible confusion for later
support.
After the setup is complete you must install the included fonts to insure proper operation of the
application. To install the fonts in Windows 95:
1.
2.
3.
4.
Double click on the “My Computer” icon on you desktop.
Select the “C” drive by double clicking it, then work your way through the directory tree
to “C:\Windows\Fonts”.
When you are in the Fonts directory you will select the “File” menu and “Add Fonts”.
Again you will need to go to the directory where you installed Label Genesis
(C:\CWLABEL by default).
The options box will display the two fonts, use the “Select All” and “OK” buttons to
install.
You can now exit and close down this option, and you are ready to run Label Genesis.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement