Novell Data Synchronizer 1.2
Connector for Mobility
Readme
Novell
®
August 4, 2011
1 Overview
The Novell Data Synchronizer Connector for Mobility is the component of the Data Synchronizer
Mobility Pack that connects your GroupWise system with mobile devices.
The Mobility Connector can also be used to connect mobile devices to other applications for which
Data Synchronizer connectors are available.
For device-specific information, see the Data Synchronizer Mobility Connector Devices Wiki (http:/
/wiki.novell.com/index.php/Data_Synchronizer_Mobility_Connector_Devices) .
For a list of the enhancements and bug fixes provided since the Mobility Pack 1.1, see the Novell
Data Synchronizer Mobility Pack 1.2 Readme (http://www.novell.com/documentation/ datasynchronizer1/datasync12_readme_mobility/data/datasync12_readme_mobility.html) .
2 System Requirements
The general system requirements for the Mobility Connector are the same as for the Data
Synchronizer Mobility Pack, as listed in “ Data Synchronizer System Requirements ” in the
Novell
Data Synchronizer Mobility Pack Installation Guide
.
Mobile device requirements for the Mobility Connector are listed in “ Mobile Device Requirements ” in the
Mobility Connector Installation and Configuration Guide
.
3 Mobility Connector Installation
The Mobility Connector is automatically installed as part of the Data Synchronizer Mobility Pack, as described in the
Novell Data Synchronizer Mobility Pack Installation Guide
.
For device-specific setup instructions, see the Data Synchronizer Mobility Connector Devices Wiki
(http://wiki.novell.com/index.php/Data_Synchronizer_Mobility_Connector_Devices)
4 Mobility Connector Issues
Section 4.1, “SSL Connections with Mobile Devices,” on page 2
Section 4.2, “Mobility Connector Startup,” on page 2
Section 4.3, “User Deletion Issue,” on page 2
Section 4.4, “Failed Initial Synchronization,” on page 3
Section 4.5, “Expired LDAP Password,” on page 3
Section 4.6, “Inaccurate Synchronization Status,” on page 3
Novell Data Synchronizer 1.2 Connector for Mobility
1
Section 4.7, “Multiple Device IDs for a Single Mobile Device,” on page 3
Section 4.8, “Reminder Note Synchronization,” on page 3
Section 4.9, “SLES Update Issue,” on page 4
Section 4.10, “Synchronization Issue on Droid X and Droid 2 Devices,” on page 4
Section 4.11, “BlackBerry Support,” on page 4
Section 4.12, “S/MIME Not Supported,” on page 4
For general connector issues, see “ General Connector Issues ” in the Novell Data Synchronizer
Mobility Pack 1.1 Readme (http://www.novell.com/documentation/datasynchronizer1/ datasync12_readme_mobility/data/datasync12_readme_mobility.html) .
4.1 SSL Connections with Mobile Devices
During Mobility Pack installation, you can choose whether to use an SSL connection between the
Mobility Connector and mobile devices. Using a non-secure connection can simplify initial testing, but a secure SSL connection should be used in a production environment.
By default, the Mobility Connector rejects SSLv2, which reportedly has several cryptographic flaws and has been deprecated for several years. SSLv3 and TLSv1 are automatically accepted.
For instructions to reconfigure the security protocol for the Mobility Connector, see “ Selecting a
Specific Version of SSL ” in “ Synchronizer System Security ” in the
Novell Data Synchronizer
System Administration Guide
.
4.2 Mobility Connector Startup
Make sure that the GroupWise Connector is running before you start the Mobility Connector. The
Mobility Connector needs to access the GroupWise Address Book through the GroupWise
Connector in order to start successfully. If the GroupWise Connector is not already running, you see an error such as:
Couldn't sync GAL: None
Couldn't sync GAL: Connector currently unavailable:
groupwise_connector_name
NOTE:
GAL stands for Global Address List.
The Mobility Connector tries again in 30 minutes to contact the GroupWise Connector. If the
GroupWise Connector is running at that time, the address book lookups begin.
4.3 User Deletion Issue
If you delete a user from the Mobility Connector, then immediately re-add the same user, the user might not be successfully added to the Mobility Connector.
Deleted users are cleaned up in the Mobility Connector database every 30 seconds. If you re-add the user to the Mobility Connector in less than 30 seconds, the re-added user is deleted from the database, even though the user is still listed in Synchronizer Web Admin. As a result, mobile device synchronization fails, even though it looks like the user has been added to the Mobility Connector.
If this situation occurs, delete the user from the Mobility Connector in Synchronizer Web Admin, then wait at least 30 seconds before re-adding the user.
2
Novell Data Synchronizer 1.2Connector for Mobility
4.4 Failed Initial Synchronization
If initial synchronization fails for a user, the Mobility Connector automatically retries three times.
Often, the retry process is successful. You can check the status of the retry process in the Mobility
Connector log file ( default.pipeline1.mobility-AppInterface.log
) in the following directory:
/var/log/datasync/connectors
If the three automatic retries fail, you can try deleting and re-adding the user. If initial synchronization still fails, see “ Mobility Connector Troubleshooting ” in the
Mobility Connector
Installation and Configuration Guide
for assistance.
4.5 Expired LDAP Password
If a user’s LDAP password expires, the Mobility Connector does not allow the user’s mobile device to connect to the Synchronizer system until the user resets the LDAP password and configures the mobile device with the new password. This functionality prevents mobile devices from consuming grace logins and locking the user out.
4.6 Inaccurate Synchronization Status
In Synchronizer Web Admin, the Mobility Connector Monitoring Information page might show that a user’s device has successfully completed initial synchronization, but the user is not seeing the expected results on the mobile device.
To verify synchronization status, click the username in the User Status box on the Mobility
Connector Monitoring Information page to display synchronization statistics for synchronized items, events, and folders. If initial synchronization has failed, see “ Mobility Connector
Troubleshooting ” in the
Mobility Connector Installation and Configuration Guide
for assistance.
4.7 Multiple Device IDs for a Single Mobile Device
In Synchronizer Web Admin, the Mobility Connector Monitoring Information page might list two device IDs for one mobile device. Some mobile devices have one device ID for e-mail and contact information and a second device ID for calendar information. This is working as designed.
4.8 Reminder Note Synchronization
When you configure the GroupWise Connector, you select the items to synchronize. For the
GroupWise Items to Sync
option, even if you deselect
Reminder Note
, reminder notes are still included during initial synchronization, although they are not synchronized after initial synchronization.
To prevent reminder notes from being including during initial synchronization:
1
In Synchronizer Web Admin, click the Mobility Connector to display the Mobility Connector
Settings page, then click
Edit XML Source
.
2
Locate the following line:
<notes>1</notes>
Novell Data Synchronizer 1.2 Connector for Mobility
3
IMPORTANT:
If you see
<Note>1</Note>
rather than
<notes>1</notes>
, you are editing the XML for the GroupWise Connector, not the Mobility Connector. It is the Mobility
Connector setting that is overriding your selection for the GroupWise Connector, so you need to make sure that you are editing the Mobility Connector XML to resolve the problem.
3
Change
1
to
0
(zero), the click
Save Custom Settings
.
4
Click
Home
to return to the main Synchronizer Web Admin page, then stop and start the
Mobility Connector to put the change into effect.
This change affects users who are added to the GroupWise Connector and the Mobility Connector after you change the configuration of the Mobility Connector. When you add users during installation of the Mobility Pack, reminder notes are synchronized by default.
4.9 SLES Update Issue
If you install the Mobility Pack and then install updates to the SUSE Linux Enterprise Server
(SLES) operating system, you might see errors in the Mobility Connector log during the SLES update. After the update has finished, restart the server, then restart the Synchronizer services to successfully complete the update.
4.10 Synchronization Issue on Droid X and Droid 2 Devices
After you enable or change the device password security policy on the Mobility Connector, synchronization stops on Droid X and Droid 2 mobile devices. Removing the existing account from the mobile device and re-adding it puts the device password security policy into effect. This is a problem with the Android 2.2 operating system only on those specific devices.
4.11 BlackBerry Support
The Mobility Connector does not support BlackBerry devices. Instead, you can use BlackBerry
Enterprise Server for GroupWise (http://na.blackberry.com/eng/services/business/server/full/) .
ActiveSync clients for BlackBerry devices are not supported for use with the Mobility Connector.
If a GroupWise user has multiple devices, multiple synchronization solutions can access the same
GroupWise account without causing any conflicts.
4.12 S/MIME Not Supported
S/MIME is not currently supported by the Mobility Connector. You can open encrypted messages in
GroupWise, but not on your mobile device.
5 Item Synchronization Issues
For device-specific synchronization issues, visit the Data Synchronizer Mobility Connector Devices
Wiki (http://wiki.novell.com/index.php/Data_Synchronizer_Mobility_Connector_Devices) .
Section 5.1, “New Contacts,” on page 5
Section 5.2, “Copied Contacts,” on page 6
Section 5.3, “Contacts with Categories,” on page 6
4
Novell Data Synchronizer 1.2Connector for Mobility
Section 5.4, “Contacts with Pictures,” on page 6
Section 5.5, “Organizations,” on page 6
Section 5.6, “Personal Address Books,” on page 6
Section 5.7, “Shared Address Books,” on page 6
Section 5.8, “Draft Items,” on page 7
Section 5.9, “HTML Formatted E-Mail Messages on Some Mobile Devices,” on page 7
Section 5.10, “Recurring Appointments,” on page 7
Section 5.11, “Personal Calendars,” on page 7
Section 5.12, “Shared Calendars,” on page 7
Section 5.13, “Non-Synchronizing Folders,” on page 8
Section 5.14, “Attachments,” on page 8
Section 5.15, “Large Attachments,” on page 8
Section 5.16, “Notes,” on page 8
Section 5.17, “Tasks,” on page 9
Section 5.18, “Phone Messages,” on page 9
Section 5.19, “Picture Quality,” on page 9
5.1 New Contacts
If you create a new contact on your mobile device, and if you do not assign it to a specific address book (perhaps called a “group” or a “category” on your mobile device) or if you assign it to an address book that does not exist in GroupWise, it might not synchronize back to GroupWise as you expect.
By default, an unassigned new contact synchronizes to your default personal address book in
GroupWise. However, the default personal address book in GroupWise is your Frequent Contacts address book, which is not synchronized to your mobile device by default. So an unassigned new contact from your mobile device might not synchronize to GroupWise where you expect it, or it might not synchronize at all.
To assure that new contacts created on your mobile device synchronize to GroupWise as expected, always assign them to a mobile device address book (or “group” or “category”) that is synchronized with a specific GroupWise personal address book. Or, make sure that you change your default personal address book in GroupWise to a personal address book that synchronizes with your mobile device.
Your default personal address book in GroupWise is the address book that displays when you click the
Contacts
tab in the GroupWise client. When you change your default personal address book in the GroupWise client, the change takes effect for your mobile device the next time the GroupWise
Connector is restarted.
Novell Data Synchronizer 1.2 Connector for Mobility
5
5.2 Copied Contacts
If you copy a contact from one GroupWise address book to another, the contact is not synchronized to your mobile device in the destination address book. The GroupWise client links the original contact into the destination address book. Such links are not currently synchronized to your mobile device. However, on some mobile devices, you can search for contacts, regardless of which address book they are located in.
If the original contact is in an address book that is not synchronized to your mobile device, such as the Frequent Contacts address book, the copied contact does not appear on your mobile device, even when you are synchronizing the address book that it was copied into. If you want a copied contact to appear on your mobile device, delete the original contact from the original address book. This creates the contact as a normal contact in the address book that is being synchronized.
5.3 Contacts with Categories
On some mobile devices, contacts with categories appear to be duplicated. If this is a problem, remove the category from the contacts.
5.4 Contacts with Pictures
If you create a contact on your mobile device and add a picture to it, the contact might not synchronize to GroupWise if the picture that you added to the contact on your mobile device exceeds the GroupWise picture size limit. For more information, see
Section 5.19, “Picture Quality,” on page 9
.
5.5 Organizations
Organizations currently do not synchronize to mobile devices.
5.6 Personal Address Books
When your default personal address book synchronizes to your mobile device, it is named Contacts rather than the name that you see in GroupWise.
The default GroupWise personal address book is your Frequent Contacts personal address book. If you change your personal address book in GroupWise, this change does not synchronize to your mobile device. As a result, if you add new contacts to the new default personal address book in
GroupWise, those new contacts synchronize to your original default personal address book on your mobile device. Restarting the GroupWise Connector resolves the problem, so that new contacts synchronize to the correct personal address book.
On some mobile devices, personal address books with categories appear to be duplicated. If this is a problem, remove the category from the personal address books.
5.7 Shared Address Books
Shared address books are synchronized to the owner’s mobile device, but not to the mobile devices of those with whom the address book has been shared.
6
Novell Data Synchronizer 1.2Connector for Mobility
5.8 Draft Items
If you create a draft item on your mobile device, it does not synchronize to your Work in Progress folder in the GroupWise client. If you create a draft item in the GroupWise client, it does synchronize to your mobile device, but you cannot modify it on your mobile device.
5.9 HTML Formatted E-Mail Messages on Some Mobile Devices
E-mail messages that display with HTML formatting in GroupWise display with HTML formatting on Apple iOS devices.
On other devices, HTML-formatted e-mail messages might display with partial HTML formatting or with plain text formatting, depending on the capabilities of the device. For details about the
HTML limitations of supported devices, see the Data Synchronizer Mobility Connector Devices
Wiki (http://wiki.novell.com/index.php/Data_Synchronizer_Mobility_Connector_Devices) .
5.10 Recurring Appointments
On some devices, the first instance of a recurring appointment does not immediately synchronize to your mobile device. If you manually resynchronize your device, the first instance of the recurring appointment appears.
However, if you decline the recurring appointment on the first instance, only the first instance is declined on the mobile device and in GroupWise. The rest of the recurring appointments remain in both places.
Declining an additional instance of the recurring appointment declines the rest of them.
5.11 Personal Calendars
In the GroupWise client, you can select the personal calendars from which you want appointments displayed in the main GroupWise Calendar. However, when calendar data is synchronized to your mobile device, all appointments are synchronized into the main calendar on the mobile device, regardless of which personal calendars you have selected in GroupWise. This is working as designed at present.
5.12 Shared Calendars
Shared calendars are synchronized to the owner’s mobile device, but not to the mobile devices of those with whom the calendar has been shared. If shared calendars are important to users, shared calendar owners can post them to the Internet using the GroupWise Calendar Publishing Host, as described in “ Publishing Personal Calendars on the Internet ” in “ Calendar ” in the
GroupWise 8
Windows Client User Guide
. After the owner publishes the calendar, other users can view the calendar URL in the Web browser on their mobile devices.
Novell Data Synchronizer 1.2 Connector for Mobility
7
5.13 Non-Synchronizing Folders
The following GroupWise folders do not synchronize to your mobile device:
Shared folders (Shared folders do synchronize to your mobile device if you are the folder owner. Users with whom the folders are shared do not see the shared folders on their mobile devices.)
Find Results (A Find Results folder is a view of search results, not an actual folder in
GroupWise.)
Sent Items
Work in Progress
Junk Mail
Trash
Documents
POP and IMAP accounts
RSS feeds
Internet calendar subscription folders
Any folders that you move under a non-synchronizing folder no longer synchronize.
5.14 Attachments
On some mobile devices, items that have attachments are available on your mobile device before the attachments themselves have synchronized. When this happens, you see an informational attachment that indicates why the actual attachment is not present. For example, the attachment might still be downloading, or the attachment might be too large to download, based on size restrictions set by the Data Synchronizer administrator.
5.15 Large Attachments
Synchronizing large attachments to other applications and mobile devices can put a substantial load on the Mobility Connector. To decrease the amount of data that is synchronized to mobile devices, you can control the maximum size of attachments for both the Mobility Connector and the
GroupWise Connector, as described in:
“ Controlling Maximum Attachment Size ” in “ Mobility Connector Configuration ” in the
Mobility Connector Installation and Configuration Guide
“ Controlling Maximum Attachment Size ” in “ GroupWise Connector Configuration ” in the
GroupWise Connector Installation and Configuration Guide
5.16 Notes
Reminder notes are synchronized to your device as all day events. If you create an all day event on your mobile device, it synchronizes to GroupWise as an all day event. If you create a reminder note on your mobile device, it does not synchronize to GroupWise.
8
Novell Data Synchronizer 1.2Connector for Mobility
5.17 Tasks
Tasks are not currently synchronized to your mobile device.
5.18 Phone Messages
Phone messages are not currently synchronized to your mobile device.
As a workaround, you can set up a rule to forward phone message items to yourself as e-mail messages, which then synchronize to your mobile device.
5.19 Picture Quality
GroupWise personal address books limit contact pictures to 64x64 pixels and less than 2K in size.
Mobile devices often handle pictures with more pixels and a larger file size.
When pictures are synchronized from your mobile device to GroupWise, GroupWise makes two attempts to optimize the picture to fit within the GroupWise limits of 64x64 pixels and 2K file size.
The resulting picture might not display as well as expected in the GroupWise personal address book.
You can use an image editing program to manually adjust the original picture to fit within the
GroupWise limits, then synchronize it from your mobile device to GroupWise.
When pictures are synchronized from GroupWise to your mobile device, they might not display as well as expected on the mobile device because the GroupWise limit is retained on the mobile device.
6 Device-Specific Issues
See the Data Synchronizer Mobility Connector Devices Wiki (http://wiki.novell.com/index.php/
Data_Synchronizer_Mobility_Connector_Devices) to check for issues related to your particular mobile device.
7 International Issues
Section 7.1, “Extended Characters in Domain and Post Office Names,” on page 9
7.1 Extended Characters in Domain and Post Office Names
The representation of extended characters in event IDs has changed between GroupWise 8.0.1 and
8.0.2. The change affects GroupWise mobile device users in domains and post offices where the domain or post office name includes extended characters. It affects these users regardless of the synchronization application they have been using (GroupWise Mobile Server, BlackBerry
Enterprise Server, or the Data Synchronizer Mobility Pack).
Perform the following procedure when updating to GroupWise 8.0.2 in order to accommodate the change in the representation of external characters:
1
Identify the users who have been synchronizing data using GroupWise Mobile Server,
BlackBerry Enterprise Server, or Novell Data Synchronizer, and who belong to domains or post offices whose names include extended characters.
2
Remove the affected users from the synchronization applications.
Novell Data Synchronizer 1.2 Connector for Mobility
9
3
Run GWCheck for each user to see if the user database currently contains any event records:
3a
In the
Database Path
field, browse to and select the path to the user’s post office.
3b
In the
Object Type
box, select
User/Resource
, then specify the user’s GroupWise user ID.
The
Analyze/Fix Databases
action is selected by default, as well as the
Structure
and
Fix problems
options.
3c
Select
Index Check
and
Contents
.
3d
On the
Logging
tab, select
Verbose logging
.
3e
On the
Results
tab, specify any users in addition to the GroupWise administrator that you want the log file sent to.
The log file is created in the
post_office_directory
\wpcsout\ofs
directory, then emailed to the specified users.
3f
Click
Run
to check the user database and generate the log file.
4
Review the log file for lines similar to the following:
Starting scan of EVENT (and EVENT configuration) records
Located EVENT configuration record (drn=58517; key='
string
')
Finished scan of EVENT (and EVENT configuration) records
The key
string
varies depending on the synchronization application. For example, if the user has been synchronizing through Synchronizer, the key
string
would look similar to: default.pipeline1.gw_Trusted App_C29AC0403_
userid
If the user has been using multiple synchronization applications, there might be multiple event records, each with a different key
string
.
5
(Conditional) If the log file shows no event records for the user, repeat Step 3 and Step 4
for the next affected user.
6
For each affected user:
6a
Identify the key
string
for the user’s synchronization application.
6b
Rerun GWCheck as described in
Step 3
, then on the
Misc
tab, specify the following option in the
Support Options
field: cleanupgwevntskey=
string
This removes all event records for the associated synchronization application.
6c
(Conditional) If the user has been using multiple synchronization applications, repeat
Step 6 for each synchronization application.
7
After all event records have been removed for all affected users, stop the POA.
8
Update the POA to GroupWise 8.0.2.
9
Add the affected users back to their synchronization applications.
This process is necessary because item IDs include domain and post office names. Because extended characters are represented differently in GroupWise 8.0.2, event records for items that contain the old representations of extended characters must be removed, so that subsequent synchronization of events for existing items can function correctly.
10
Novell Data Synchronizer 1.2Connector for Mobility
8 Documentation
Novell Data Synchronizer Mobility Pack documentation is available at the Novell Data
Synchronizer Documentation Web site (http://www.novell.com/documentation/datasynchronizer1) :
Novell Data Synchronizer Mobility Pack Readme
Novell Data Synchronizer installation and administration guides
Novell Data Synchronizer connector documentation is available at the Novell Data Synchronizer
Connector Documentation Web site (http://www.novell.com/documentation/datasync_connectors1)
Connector Readmes
Connector Quick Starts
Connector installation and configuration guides
In addition to the Data Synchronizer product documentation, the following resources provide additional information about Data Synchronizer and connectors:
Novell Support and Knowledgebase (http://www.novell.com/support)
Data Synchronizer Support Forum (http://forums.novell.com/forumdisplay.php?&f=939)
Data Synchronization Cool Solutions (http://www.novell.com/communities/coolsolutions/ datasynchronizer)
Data Synchronizer Mobility Pack Best Practices Wiki (http://wiki.novell.com/index.php/
Data_Synchronizer_Mobility_Pack_Best_Practices)
Data Synchronizer Mobility Connector Devices Wiki (http://wiki.novell.com/index.php/
Data_Synchronizer_Mobility_Connector_Devices)
Data Synchronizer Connector Marketplace (http://www.novell.com/products/datasynchronizer/connectors)
9 Legal Notices
Novell, Inc. makes no representations or warranties with respect to the contents or use of this documentation, and specifically disclaims any express or implied warranties of merchantability or fitness for any particular purpose. Further, Novell, Inc. reserves the right to revise this publication and to make changes to its content, at any time, without obligation to notify any person or entity of such revisions or changes.
Further, Novell, Inc. makes no representations or warranties with respect to any software, and specifically disclaims any express or implied warranties of merchantability or fitness for any particular purpose. Further, Novell, Inc. reserves the right to make changes to any and all parts of
Novell software, at any time, without any obligation to notify any person or entity of such changes.
Any products or technical information provided under this Agreement may be subject to U.S. export controls and the trade laws of other countries. You agree to comply with all export control regulations and to obtain any required licenses or classification to export, re-export, or import deliverables. You agree not to export or re-export to entities on the current U.S. export exclusion lists or to any embargoed or terrorist countries as specified in the U.S. export laws. You agree to not use deliverables for prohibited nuclear, missile, or chemical biological weaponry end uses. Please
Novell Data Synchronizer 1.2 Connector for Mobility
11
refer to the Novell International Trade Services Web page (http://www.novell.com/info/exports/) for more information on exporting Novell software. Novell assumes no responsibility for your failure to obtain any necessary export approvals.
Copyright © 2010-2011 Novell, Inc. All rights reserved. No part of this publication may be reproduced, photocopied, stored on a retrieval system, or transmitted without the express written consent of the publisher.
For Novell trademarks, see the Novell Trademark and Service Mark list (http://www.novell.com/ company/legal/trademarks/tmlist.html) .
All third-party trademarks are the property of their respective owners.
12
Novell Data Synchronizer 1.2Connector for Mobility
