New FMx11 HAX 6x4 Rigid Air Ride

New FMx11 HAX 6x4 Rigid Air Ride
Volvo Trucks. Driving Progress
New FMx11 HAX 6x4 Rigid Air Ride - Construction/Heavy Construction FM 64 R1HAX
2989
,945
Cab 2490
Chassis Dimensions [mm]
WB Wheelbase
3200
3400
3700
3900
4600
A
D
N
N
Overall Chassis Length
Centre of rear axle to front of body
Rear Overhang (Min)
Rear Overhang (Max)
7865
2603
1225
1775
8165
2803
1225
1875
8615
3103
1225
2025
8915 10015 10465
3303 4003 4303
1225 1225 1225
2125 2525 2675
T
Y
Y
W
W
Theoretical Wheelbase
Centre of Gravity for Payload (Min)
Centre of Gravity for Payload (Max)
Body Length (Min)
Body Length (Max)
3885
-278
-278
5762
5762
4085
-261
-261
6127
6127
4385
-234
-234
6674
6674
4585
-215
-215
7035
7035
5285
-157
-157
8320
8320
4900
5585
-136
-136
8877
8877
Chassis Weights [kg]
Front Axle
Rear Bogie
Kerb Weight
Payload (including body, driver, fuel etc)
4680 4695 4710 4715 4760 4785
3720 3735 3755 3760 3835 3860
8400 8430 8465 8475 8595 8645
12600 12570 12535 12525 12405 12355
Turning Diameter [mm]
Turning Circle Diameter Kerb to Kerb
Turning Circle Diameter Wall to Wall
Plated Weights [kg]
Gross Vehicle Weight
Gross Combination Weight
Front Axle
Rear Bogie
13900 14500 15400 16000 18200 19100
15400 16000 16900 17500 19700 20600
Plated
Design
21000
44000
6000
15000
27500
44000
6500
21000
Important Notes
Chassis Dimensions
Cab Height: +416 mm for CAB-HSLP, +554 mm for CAB-XHSL.
Front Axle to Back of Cab: +399 mm for CAB-HSLP and CAB-SLP and CABXHSL.
D-measure includes a front clearance of 50 mm and for rigid trucks also a
subframe of 100 mm.
Height can vary ± 20 mm for leaf and ± 10 mm for air suspension.
All dimensions are for unladen chassis and any tag axles down. Chassis height
used: CHH-HIGH.
Rear overhang used for vehicle weight calculation is the maximum rear
overhang (N Max) for selected wheelbase.
Height change when chassis height CHH-MED,FRAME300: -60 mm.
Weight and dimensions are based upon the following tyres:
Front Axle Tyres:
295/80R22.5
Drive Axle Tyres:
295/80R22.5
Chassis weight includes oil, water, AdBlue, 70 litres fuel and without
driver. Kerb weight can vary ± 3%.
Turning diameters are theoretically calculated.
Legal weights can differ from country to country.
For more detailed weight information, including optional equipment weights,
ask your Volvo sales contact to enter your specification into the Volvo Weight
Information system (WIS).
Do NOT use this drawing for bodybuilding. Refer to Volvo Bodybuilder
Instructions and chassis assembly drawing FM64R1HAX.
1 (4)
Ref: FM 64 R1HAX16 NZL 2014-09-18 ENGAU
New FMx11 HAX 6x4 Rigid Air Ride - Construction/Heavy Construction FM 64 R1HAX
Truck use
□ EXST-SSP
Polished stainless steel exhaust stack
■ RC-ROUGH
Operating class on/off road
□ TBC-NZL
Trailer brake connections (suzi coils)
□ TIPP-PRE
■ UNIFORM
Tipper preparation
Basic uniform vehicle
□ TRBR-HCR
□ TRBR-STA
Hand controlled trailer brake, reduced pressure
Stationary trailer brake control
Core components
□ TRB-STRE
Automatic trailer brake activation (stretch brake)
■ FMX-DAY
□ FMX-SLP
Day cab
Sleeper cab
□ ATANK-AL
Aluminium airtanks
■ EU5SCR-M
■ TL-LED
LED tail lights
Eu5 SCR Selective Catalytic Reduction ( mandatory )
□
■
□
□
Eu5 SCR engine, 11C litre, 330 hp, 1600 Nm
Eu5 SCR engine, 11C litre, 370 hp, 1750 Nm
Eu5 SCR engine, 11C litre, 410 hp, 1950 Nm
Eu5 SCR engine, 11C litre, 450 hp, 2150 Nm
D11C330
D11C370
D11C410
D11C450
■ EBR-VEB
Volvo Engine Brake (VEB)
□ AT2612D
□ PT2106
■ VT2514B
Volvo I-shift 12 speed automatic transmission (2600nm )
Powertronic 6 speed transmission ( 2100nm )
Volvo 14 speed manual transmission ( 2500nm )
■ RTS2370B
Rims and Tyres
■
□
□
□
Single reduction tandem 23t GCW70t
Packages
■ AUDHIG
Sound system-advanced
Chassis
RT-ALDPD
RT-ALDU
RT-ALPDU
RT-STEEL
10 stud dura-bright alloy disc rims
10 stud alloy disc rims
10 stud polished alloy disc rims
10 stud steel disc rims
□ SPWT-D
□ SPWT-F
Spare rim & tyre equal to drive
Spare rim & tyre equal to steer
□ SWCP-T2
Transport mounted spare wheel
■ JACK-12T
□ JACK-15T
12 tonne capacity jack with brace
15 tonne capacity jack and brace
■ TOOLKIT
Tool kit complete
■ INFLAHOS
Tyre inflation hose (20 metres)
Powertrain equipment
■ FST-PAR
□ FST-PAR3
Parabolic leaf spring front suspension
3 leaf parabolic front springs (stiffer than normal)
■ FAL6.5
□ FAL7.5
Front axle load 6.5 tonnes
Front axle load 7.5 tonnes
□ TP-FUEC
□ TP-HD
Distribution and Construction optimized gear changing
software
Fuel optimized gear changing software
Heavy duty (GCM) control software
■ FSTAB
□ FSTAB2
□ FSTAB3
Front stabilizer, normal stiffness
Front stabiliser bar increased stiffness
Heavy duty front stabiliser bar
□ AMSO-AUT
Manual gear shift in automatic mode.
□ AVO-ENH
AMT Vocational option - enhanced
■ RAL21
Rear suspension load rating: 21,000 kg
□ APF-ENH
Enhanced I-shift PTO functions
■ RSTAB1
□ RSTAB3
Rear stabiliser bar
Heavy duty rear stabiliser bar
□ CD40B-O
■ CS43B-O
Volvo 400mm twin plate clutch
Volvo 430mm single plate clutch
□ ACTST-TO
Volvo Dynamic Steering
■ EBS-MED
Electronic Brake System (EBS) contains
ABS, Traction control, Hill start aid
Diff lock control, Brake assist
Wheel brake monitoring, EBS status
□ TC-HWO
■ TC-MAOH2
□ TC-MWOH2
Transmission Oil Cooler
High performance transmission cooler
High performance transmission cooler
■ AIRIN-HI
High air intake, roofline position
■ ACL1ST-S
Air cleaner with two stage filter element
■ 24AL120B
□ 24AL150B
High capacity alternator, 120 Ampere.
Alternator, 150 Ampere
□ TRAP-HD
Heay Duty Transmission Internals
□ PTER-100
□ PTER-DIN
□ PTER1400
PTO engine rear mounted with flange DIN100/ISO7646
Power Take Off / splined shaft groove (female) DIN5462.
Rear engine mounted power-take-off with flange SAE 1410
□
□
□
□
□
□
□
□
□
□
HPE-F101
HPE-F41
HPE-F51
HPE-F61
HPE-F81
HPE-T53
HPE-T70
HPE-V120
HPE-V45
HPE-V75
F1-101 Hydraulic pump rear engine mounted
F1-41 Hydraulic pump rear engine mounted
F1-51 Hydraulic pump rear engine mounted
F1-61 Hydraulic pump rear engine mounted
F1-81 Hydraulic pump rear engine mounted
F2-53/53 twin flow hyd pump rear engine mounted
F2-70/53 twin flow hyd pump rear engine mounted
V1-120 variable pump rear engine mounted
V1-45 variable pump rear engine mounted
V1-75 variable pump rear engine mounted
□
□
□
□
□
□
□
□
□
□
PTPT-D
PTPT-F
PTR-D
PTR-DH
PTR-DM
PTR-F
PTR-FH
PTR-FL
PTRD-D
PTRD-D1
PTO DIN / Powertronic
PTO flange conn / Powertronic
Low speed PTO with DIN connection
High speed PTO with DIN connection
Medium speed PTO with DIN connection
Rear PTO trans.flange 100% speed
High speed PTO with flange connection
Low speed PTO with flange connection
PTO with 2 DIN connections rear + 1 DIN connection front
PTO with 1 DIN + 1 flange connection rear + 1 DIN connection
□ AUXPARK
Auxiliary parking brake
■ FST7070
□ FST8080
Frame section thickness 7mm
Frame section thickness 8mm
□
■
□
□
□
Liner (inner) from end of engine to end of frame
Liner (inner) - front of bogie to end of bogie
Liner (inner)- front of bogie to end of frame
Liner (inner) - trans x-mem to end of bogie
Liner (inner) - trans x-mem to end of frame
FIL-EEEF
FIL-FBEB
FIL-FBEF
FIL-TXEB
FIL-TXEF
■ BBOX-L
Battery box mounted on LHS chassis rail
■ 2BATT225
2x225 Ah batteries
□ BATTIND
Battery charge indicator (in the DID)
■ MSWI-C
□ MSWI-R
Isolation toggle switch LHS of chassis
Isolation switch on key fob (press door lock twice to isolate)
■ R415A66
RHS 415 litre alloy fuel tank w/o step
Min volume 415l
Max volume 465l
■ UL-FUEL
LHS fuel tank not fitted
■ ADB064
□ ADB090
AdBlue tank 64 litres (LHS)
AdBlue tank 90 litres (LHS)
■ FCAP-L
Fuel tank cap with lock
■ ESH-RIGH
□ ESH-VERT
Muffler horizontal, right exhaust outlet
Muffler horizontal, vertical exhaust outlet on right hand side
■ Standard Equipment
□ TP-DICON
□ Optional Equipment
For more detailed information about cab and powertrain equipment, please refer to separate specification sheets.
For all possible options and combinations of options please consult your Volvo sales contact who can create a specification to match your requirements using the
Volvo Sales Support system (VSS).
The factory reserves the right to modify design and change equipment without previous notification.
The specification can vary from country to country.
2 (4)
Ref: FM 64 R1HAX16 NZL 2014-09-18 ENGAU
New FMx11 HAX 6x4 Rigid Air Ride - Construction/Heavy Construction FM 64 R1HAX
□ PTRD-D2
□ PTRD-F
□
□
□
□
□
HPG-F101
HPG-F41
HPG-F61
HPG-F81
HPG-V120
front
PTO with 2 flange connection rears + 1 DIN connection front
PTO with 1 DIN + 1 flange connection rear
F1-101 hydraulic pump gearbox mounted
F1-41 hydraulic pump gearbox mounted
F1-61 hydraulic pump gearbox mounted
F1-81 hydraulic pump gearbox mounted
VP1-120 hydraulic pump gearbox mounted
□ ETSB-R
Rear cab wall storage
□ TABLE
Table
□ REF-ICPK
Refrigerator prep kit (on engine tunnel)
□ BOTH-D
Bottle holder in driving area
■ INLI-BAS
□ INLI-NL
Interior night lights
Interior white and red (night) light
□ EIDLESD
Engine idle shutdown (2.5 minutes)
□ ARL-FLEX
Flexible reading lamp (snake light)
■ INST-MED
Mechanical instrument cluster with DID.
■ RH-MSR
Roof hatch-manual - steel - rear opening
□ CRUIS-E
■ CRUISEC
Cruise control (use with TP-FUEC or TP-FUEC3)
Cruise control
Cab exterior
■ PAICS-B
Grey mirrors, sun visor, instep & bumper
■ ESP-BAS1
ESP package (trailer combinations with ABS)
■ AWIND-RF
Cab rear window- fitted
□ HWSS-AC
Adaptive cruise control & forward collision warning
□ SWIND-PS
Cab passenger side aux. window
□ LCS
Lane change support
□ RSENS-W
Rain sensor to activate wipers
■ LOCK-MAN
□ LOCK-REM
Manual door locking
Central door locking with remote control
□ CU-ECC
■ CU-MCC
Climate controlled air conditioning
Manual controlled air conditioning
■ BUMP-HD
Bumper-heavy duty
□ IMMOBIL
Engine immobiliser
□ SIDEH-B
□ SIDSTP-R
Side handle ( driver's side )
Side ladder with handle ( driver's side )
□ ALARM-B
Anti-theft alarm (cab)
■ BUGNET
Insect net in front of radiator
■ WLIFT-EB
Electric windows
■ ISUNS-DS
□ CTILTP-E
■ CTILTP-M
Electrical cab tilt pump
Manual cab tilt pump
Interior side sunvisor - driver's door
■ ISUNF-B
□ ISUNF-MD
Interior front sunvisor-standard
Interior front sunvisor- with mirror (driver's side)
□ FCABS-A
■ FCABS-M
Front cab suspension-air bellows
Front cab suspension-mechanical spring
■ CSPU-S
Upper-cup holders & lower-storage area
□ RCABS-A
■ RCABS-M
Rear cab suspension-air bellows
Rear cab suspension-mechanical spring
■ BUPALARM
Reverse alarm
■ MIRCOMFX
Heated & elec. operated both sides. (convex )
□ BUPMON
Back-up monitor
■ SUNV-H
Exterior sunvisor
□ LOADIND
Load indicator, electronic controlled suspension (SUSPL-EC)
□ AD-ROOF
Aero-dynamic roof mounted deflector
□ REMC-MF
Multifunction wireless remote control
□ AD-SIDES
Aero-dynamic cab side deflectors
■ FIREX25A
Fire extinguisher 2.5 kg
□ GUARD-W
Windscreen stoneguard
■ WRITEPAD
Storable steering wheel fit clip board
■ UPHTRI01
Vinyl & Textile trim
■ HL-BAS2
□ HL-BHID2
Heavy duty headlamps
Xenon head lamps high intensity discharge
■ DST-CF5
Fully adjustable driver's comfort seat
Air suspension, heated, integrated safety belt
□ HL-CLEAN
Head lamp cleaning system
■ HLP-ST
□ HLP-ST2
Headlamp protection-steel
Headlamp protection-steel/wire mesh (non ADR compliant)
□ HL-ADJ
Head lamp adjustment
■ DRL-LED
V-shaped LED daytime running light
■ IDLAMP-A
Identification lamps-amber
Passenger seatbelt pretensioner
□ BEACON-P
Beacon light wire preparation
Armrests driver's both sides - passenger side single
Armrests both sides - driver's & passenger's seat
Armrests both sides - driver's seat
□ SPOTP-F
Aux spotlamp preparation, 280W maximum
□ ANT-CBR
Antenna for CB radio, single antenna
■ SBPRE-DS
Drivers seat belt pretensioner
■ PST-BAS1
□ PST-BENC
□ PST-CF5
Basic passenger's seat
Passenger bench seat
Fully adjustable passenger comfort seat
Air suspension, heated, safety belt
□ SBPRE-PS
□ ARM-DBPS
□ ARMRE-BB
■ ARMRE-DB
Superstructure
■ ARU-BAS
Seat armrest upholstery - basic
■ GRABHI-B
Instep grab handle - standard
■ FMAT-RU2
□ FMAT-TX2
Floor mats-rubber (extended side)
Floor mats-textile & rubber
□ LBK-RES
□ LBK70
■ ULBK
Foldable rest kit
Lower bunk 700mm wide
Without lower bunk
□ MATL-SF
Mattress lower bunk - semi firm
□ WL-CHPK
Chassis mounted working lamp prep kit
□ OLMAT-BA
Mattress overlay - basic
□ SAFE
Safe box at bed-end
□ ETSB-F
□ ETSB-FR
Engine tunnel storage box
Engine tunnel storage box & rear cab wall
□
□
□
□
2 x H3/70W work lamps with white lens.
Prep kit for high-mounted work lamps.
Prep kit for low-mounted work lamps.
Prep kit for low- and high-mounted work lamps.
■ Standard Equipment
□ SRWL-2RW
□ SRWL-PK
□
□
□
□
SWL-2FW
SWL-2RW
SWL-4W
SWL-PK
WLC-H2W
WLC-PKH
WLC-PKL
WLC-PKLH
2 white rear chassis-mounted working lamps
Wiring prep for chassis-mounted reverse/working lamps-3
position switch
2 white side working lamps (forward facing)
2 white side working lamps (rearward facing)
4 white side working lamps
Wiring prep for chassis-mounted working lamps-2 position
switch
□ Optional Equipment
For more detailed information about cab and powertrain equipment, please refer to separate specification sheets.
For all possible options and combinations of options please consult your Volvo sales contact who can create a specification to match your requirements using the
Volvo Sales Support system (VSS).
The factory reserves the right to modify design and change equipment without previous notification.
The specification can vary from country to country.
3 (4)
Ref: FM 64 R1HAX16 NZL 2014-09-18 ENGAU
New FMx11 HAX 6x4 Rigid Air Ride - Construction/Heavy Construction FM 64 R1HAX
■ ECBB-HIG
Body builder module
□ BBCHAS1
□ BBCHAS3
Body builder chassis electrical interface, 1 x 7 pin connector
Body builder chassis electrical interface, 3 x 7 pin connectors
□ BEPR-T2
Body Builder electrical prep. for tipper with remote control
□ HBA-SB
Holes for body attachments
■ AESW2
□ AESW2PK
2 flexible switches (AUX 1 and AUX 2).
2 flexible switches (AUX 1 & AUX 2) + additional 4 flexible
switches
□ AUXSW-4
4 extra bi-stable switches wired to BBM
Delivery services
■ TGW-3GWL
Telematics gateway with 3G & WLAN
□ TESP-T
TESP (Dynafleet) with transport info
□ FMS-PK
Fleet management system gateway
■ Standard Equipment
□ Optional Equipment
For more detailed information about cab and powertrain equipment, please refer to separate specification sheets.
For all possible options and combinations of options please consult your Volvo sales contact who can create a specification to match your requirements using the
Volvo Sales Support system (VSS).
The factory reserves the right to modify design and change equipment without previous notification.
The specification can vary from country to country.
4 (4)
Ref: FM 64 R1HAX16 NZL 2014-09-18 ENGAU
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement