PixController LANC Wildlife Video Surveillance Camera System, LANC Remote Video Security System User Manual

Below you will find brief information for Wildlife Video Surveillance Camera System LANC PixController, Remote Video Security System LANC PixController. This is a complete electronic kit to construct a Wildlife Video Surveillance Camera System, or Remote Video Security System. The LANC PixController uses an integrated Passive Infrared (PIR) detector, which detects body heat and motion to trigger any LANC compatible Video Camcorder. The LANC PixController will send a command to the attached camcorder to power the camcorder on, record video for a user set amount of time, then power the camcorder off.

PDF Download
Document
Wildlife Video Surveillance Camera System LANC PixController User Manual | Manualzz

Advertisement

Advertisement

Advertisement

Key features

  • PIR detection
  • LANC compatible
  • Adjustable recording time
  • External light connector
  • Sensitivity adjustment
  • Walk-Test PIR mode
  • Battery powered
  • Waterproof case
  • Easy installation

Frequently asked questions

The LANC PixController uses a Passive Infrared (PIR) sensor to detect motion. When motion is detected, the PixController sends a command to the connected camcorder to start recording video, for a user-defined amount of time. The camcorder is then powered off.

The LANC PixController is compatible with any camcorder that has a LANC input.

The PIR sensor has a sensitivity knob that allows you to adjust the detecting distance. This is helpful in avoiding false triggers, especially in summer or during night photography.

Yes, the LANC PixController has an external light connector that allows you to connect any light source (less than 2A and under 60V). This is useful for taking night movies or supplementing the built-in flash.
Preparing document for printing…
0%