FireHawk M7 Air Mask New! Self-Contained Breathing Apparatus

FireHawk M7 Air Mask New! Self-Contained Breathing Apparatus
Self-Contained Breathing Apparatus
k
s
a
M
ir
A
7
M
k
w
a
FireH
New!
Air Mask
Through the NFPA, firefighters have strived to improve the
durability and performance of SCBA and PASS devices.
To this end, the new NFPA 2007-edition standards for
self-contained breathing apparatus and personal alert
safety systems call for a PASS alarm that performs at
500º F, electronics that remain waterproof after six
immersion cycles at 1½ meters depth of water and a
350°F heat exposure, and electronics that function after a
rigorous 3-hour tumble test. They also raised the bar on
voice communication capability, now requiring a minimum
score of 85% at a 10-ft distance (allowing an electronic or
mechanical system). (Previously this was 72% at 5 feet.)
MSA’s new FireHawk M7
logical
represents a true techno
rsonal
achievement in critical pe
s determined
protection. As firefighter
that
the safety requirements
t the new
would be needed to mee
7-edition
NFPA 1981 and 1982–200
ering teams
standards, MSA’s engine
tions.
began designing the solu
r Mask
The new FireHawk M7 Ai
safety design
emerged with seven lifedular Air Mask
components built on a mo
ceed the new
platform, developed to ex
and provide
NFPA 2007 requirements
est-quality
firefighters with the high
SCBA currently available.
Customer Service Center: 1-800-MSA-2222 • Website: www.MSAnet.com • QuickLit Fax Information: 1-800-672-9010
45
Self-Contained Breathing Apparatus
1. TAKING THE HEAT
4. FIREGROUND MANAGEMENT
Although MSA PASS alarms have performed in extreme
temperatures for more than a decade, a top priority was to
design an alarm that could really take the heat! The new M7
alarm (patent pending) was developed in cooperation with
prominent university acoustic experts, resulting in an emitter
that exceeds 95 decibels with solid performance at the NFPA
500F test! Once again, giving you that lifesaving edge in the
face of danger.
Firefighter accountability systems have never before been
as practical, complete, and user-friendly as the MSA M7
Accountability System. It’s based on the ICM® TxR Unit
introduced in mid-2006, which has thousands of systems
deployed in virtually every type of fire department, and they’re
performing phenomenally! It displays a full array of visual and
audible information for up to 100 firefighters within a one-mileline-of-site – exactly what incident commanders wanted.
Record keeping is also made easy by downloading reports.
This crown jewel is available only from MSA!
2. VIRTUALLY “BULLET-PROOF” ELECTRONICS
Like an armor shield, the M7 HUD, Power Module, and
Control Module are encased in a proprietary high-temperature
impact-grade polymer, providing the highest possible protection
against impact and water ingress. Electronics enclosures are permanently
sonically welded to a hermetic standard and
use a high-pressure O-ring to ensure a
consistent water-tight seal. The new
M7 electronics are virtually “bullet-proof”
against fire-ground hazards.
5. EXTENDED PROTECTION
The new FireHawk M7 Air Mask is not your typical SCBA.
Firefighters need to be prepared for the unexpected, and
emergency egress from a 2nd-floor or higher can be impossible
without the right safety equipment. That's why the new
M7 Air Mask offers an NFPA- compliant integrated rappelling
system, called the Rescue Belt, providing firefighters with one
more lifesaving option in the face of danger.
"Above and beyond" protection is also provided with the
CBRN FireHawk MMR. The CBRN FireHawk includes a
positive-protection Tetraplex™ shield, to prevent contact
between chemical warfare agents and the most vulnerable
component of regulators, their thin elastomeric diaphragm.
Other "air-wash" approaches may pass in laboratory
conditions. The shield provides positive protection against all
potential conditions.
3. STRAIGHT-TALK COMMUNICATIONS
We’ve got you covered with communications, starting with a
high-performance mechanical speech diaphragm, performing so well
that it may likely serve as a stand-alone solution to meet the
latest NFPA communications requirements! Backing the
mechanical diaphragm is an electronic amplifier with an internal
facepiece microphone for ultimate clarity, a digital signal
processor to eliminate feedback even when shouting, three
volume levels, and an auto-off feature after 20 minutes of
no-use to save batteries. The new Air Mask speaks loud and
clear when it comes to communications.
46
External hazards are bad enough without having concerns
of spreading illness among firefighters through shared-use
SCBA. The Ultra Elite® facepiece protects you against user
cross-contamination with MSA’s inhalation check-valve:
a “must have” in modern safety equipment.
Customer Service Center: 1-800-MSA-2222 • Website: www.MSAnet.com • QuickLit Fax Information: 1-800-672-9010
Self-Contained Breathing Apparatus
6. LIGHTWEIGHT AND EASY TO USE
Firefighters already have enough weight to carry and gear to
maintain, so MSA engineers set out to lighten the load of
components, reduce parts counts, simplify maintenance, maximize user
comfort, and modularize the design. The FireHawk M7 Air Mask has a
lightweight polymer backplate, with quick-release harness straps, an
error-proof cam-lock cylinder attachment, fast change-out electronic
components, a large swiveling lumbar pad, and regulators that will fit
in the palm of your hand (less than 30 parts for the MMR and 14 for
the 1st stage). Our time-tested Ultra Elite facepiece has unbeatable
comfort, visibility, communications, cross-contamination protection,
fit, and seal.
7. PLATFORM FOR THE FUTURE
The FireHawk M7 Air Mask is designed to accept future technology
upgrades. Included in every M7 electronics ensemble is a 2.4GHz
personal wireless network, a network that transmits and receives
encrypted information over a short-range on a firefighter’s body.
This new wireless feature provides the capability to add on future
technology that can provide additional information back to incident
command through the FireHawk M7 Accountability System.
Software can also be upgraded wirelessly in the field, through
the M7 wireless network. You never have to worry about radio
interference either – we have you covered with a thoroughly-tested
RFI shield design that protects against all fireground radio signals.
The new FireHawk M7 Air Mask provides
you with the best technology
today and positions you
for well into the future.
®
M7 Air Mask
Customer Service Center: 1-800-MSA-2222 • Website: www.MSAnet.com • QuickLit Fax Information: 1-800-672-9010
47
Self-Contained Breathing Apparatus
Industrial SCBA
AirHawk® MMR Air Mask
Based on the highly successful MSA FireHawk Air Mask which sees duty in the harshest
environment —firefighting— MSA’s Airhawk MMR Air Mask incorporates the latest technologies
available for industrial, agricultural, HazMat and HVAC work.
What sets the Airhawk SCBA apart from the rest of the field is the long list of options that let you
customize the apparatus for your specific needs.
• The Advantage 4000 Facepiece that can be
configured to air-purifying, supplied-air and
SCBA usage via MSA’s unique adapter design.
• The Airhawk SCBA is available in lowpressure (2216 psig) or high-pressure (4500
psig) versions
• Three different 30-minute rated low-pressure
cylinder types—aluminum, hoop-wound or
carbon-fiber—let you choose low weight or
low-cost
• High-pressure Carbon Fiber-wrapped
Composite cylinders are available in
30-, 45- or 60-minute rated durations
• The innovative Firehawk PTC (Push-ToConnect) Regulator easily and securely
attaches to your facepiece
• The industry leading Ultra Elite® Facepiece
offers the choice of three sizes in either
SoftFeel® Hycar rubber or silicone
• Dual-purpose options allow the connection
of an air-line. Five different quick-disconnect
fittings are available
• The harness assembly is available in Nylon
or flame-and-heat-resistant (FHR)Kevlar
material. A chest strap, lumbar pad and
shoulder pads can also be added, making this
the most comfortable industrial Air Mask on
the market today
AirHawk® MMR Air Mask with Advantage 4000 Facepiece
Designed with the industrial user in mind, employing the latest in engineering advancements, the Airhawk MMR Air Mask will perform wherever firefighting
compliance to NFPA 1981 is not required. See p. 54 for AirHawk ATO ordering information.
Tactical Air Masks
BlackHawk® Tactical Air Mask
The BlackHawk Tactical Air Mask is especially
designed for tactical situations. Certain
BlackHawk features eliminate reflections
and/or audible sounds that would compromise
concealment—in other words, it is black,
sleek and silent.
Ultra Elite® Facepiece
• All-black Ultra Elite facepiece, available in
Hycar or silicone rubber
• Three sizes of facepiece with two sizes of
black nosecups
• HUD System mounting bracket
• SpeeD-ON® Kevlar Head Harness
Mask-Mounted Regulator
• Firehawk® Regulator with Push-to-Connect
feature
• Neoprene intermediate pressure hose
• Variable flow bypass system
EOSTI / Gauge
• Nightfighter Heads-Up Display functions
silently as the low pressure warning device
and the cylinder pressure gauge*
• System consists of a transmitter mounted on
the gauge line and a receiver that mounts on
the facepiece
• A series of LEDs provides the user with
cylinder volume information
• LEDs function in an intermittent mode and
can be refreshed by depressing the refresh
button on the transmitter
Harness and Carrier
• Composite backplate reinforced with
glass fibers
• Large side handles on the backplate for
pulling the wearer to safety
• Waistbelt, shoulder straps and pull strap
are all made of flame and heat-resistant
(FHR) Kevlar material
• Optional FHR shoulder pads and lumbar
pad (solid or swiveling)
• Optional FHR chest strap
• Adjustable Kevlar cylinder retention strap
with over-center latching system
• Cylinder shroud that encompasses the
cylinder and Air Mask pneumatics. Shroud
is made of Advance FHR material
Cylinders
• The Blackhawk Air Mask is available in both
low-pressure (2216 psi) and high-pressure
(4500 psi) operating systems
• Carbon- fiber cylinders available for use are:
L-30 Stealth, H-30 Stealth, H-45 Low-Profile
Stealth, H-60 Stealth
Quick-Fill® System Option
Carrying Case
• A shoulder-mounted Quick-Fill System option
is offered
• A hard case or soft case are offered for storage
purposes
Workline Accessory
CBRN Protection
• For extended-use applications, an air-line
accessory is available with your choice of
five different types of fittings
• Optional CBRN hardened facepiece and regulator
assembly
• Positive protection from CBRN agents
• Same CBRN components as the very popular
FireHawk Air Mask
* There is no audible low-pressure warning device on this unit.
Rescue Belt
See p. 54 for BlackHawk ATO ordering
information.
• Emergency egress system integral to the
SCBA waist belt
• Includes Kevlar line and rappelling hardware
48
BlackHawk® Tactical Air Mask
Customer Service Center: 1-800-MSA-2222 • Website: www.MSAnet.com • QuickLit Fax Information: 1-800-672-9010
Self-Contained Breathing Apparatus
SCBA Key Components
Facepiece Assemblies for FireHawk M7 Air Masks
Ultra Elite Facepiece
Ultra Elite® Facepiece
The MSA Ultra Elite Facepiece offers an effective combination of
comfort and performance.
Designed to provide exceptional peripheral and downward vision, the
Ultra Elite Facepiece features a super-soft facepiece texture for a
smooth and comfortable fit. It also resists chemical attack and
temperature extremes, and withstands rugged day-to-day use without
tearing and ripping.
The design of the Ultra Elite Facepiece is based on extensive
anthropometric studies of the face-length, temple-width and chin-width
data from more than 8,000 individuals. The result is a facepiece that
provides improved seals against a wide range of facial contours. To
provide a secure, comfortable fit, the facepiece utilizes five adjustable
straps with stainless steel, field-replaceable buckles that resist chemical
attack. The straps also feature slightly larger adjustment tabs that are
easier to manipulate, even with gloves on.
For slip-on convenience, the Ultra Elite Facepiece can be equipped with
the SpeeD-ON® Facepiece Harness. Made of flame- and heat-resistant
Kevlar Fabric, the harness features a hair-net type, five-point suspension
that can be easily and securely adjusted at each point.
Lenses on MSA full facepieces are molded from polycarbonate, and a
special super hardcoating provides a tough, durable facepiece lens to
resist scratching.
Firehawk® MMR
The Firehawk MMR, MSA’s mask-mounted regulator assembly, is
available with two different attachment systems, the Firehawk MMR truly
redefines ease-of-use and ease-of-maintenance, combined with
outstanding performance.
The Firehawk second-stage regulator features a unique Slide-ToConnect (STC) attachment system that allows firefighters to hang the
regulator on the facepiece in the “ready position,” then simply push it
into the facepiece when SCBA air is needed. Doffing of the regulator,
while wearing gloves, is also easy with two large release buttons that
automatically turn-off the flow of air as the regulator is doffed. A dualswivel feature on the pressure hose provides maximum freedom-of-head
movement and the silicone hose material ensures hose flexibility even at
very cold temperatures.
In addition to the STC system, MSA also offers a second connection
option for the Firehawk Regulator, the Push-to-Connect (PTC). The PTC’s
Adapter self-centers the Firehawk regulator and the loud dual sound of
the regulator engaging onto the facepiece provides you with confidence
that the Firehawk PTC is securely attached to your facepiece—an action
that takes just seconds, when seconds count!
Maintenance is also a breeze, considering the Firehawk design requires
no tools, adhesives, or sealants, and has approximately 70% fewer parts
as compared to other regulators on the market. Additionally, there are no
internal adjustments required. Any adjustments to the regulator may be
accomplished at a single adjustment point through the outlet port of the
regulator.
Ease of use and maintenance, combined with outstanding performance,
makes the Firehawk MMR clearly the product of choice.
Heads-Up Display (HUD)
When you open your Air Mask’s cylinder
valve, the HUD automatically activates,
displaying the cylinder pressure reading in
25% increments.
ClearCommand Communications System
MSA’s ClearCommand Communications System is designed specifically
to meet the modern communications needs of firefighters. It features an
internally mounted microphone coupled with a large-diameter (50mm)
amplifier speaker for optimal clarity and volume. Using a proprietary
circuit design, the system delivers more than twice the volume of a
facepiece alone. Mounted in an “out-of-the-way” position, the
ClearCommand System doesn’t block vision or mechanical
communication. The Ultra Elite’s mechanical voicemitter is still fully
functional, even with the system installed.
Ultra Elite M7 Facepiece, SpeeD-ON Head Harness, Nosecup and M7 HUD Bracket
Firehawk STC
Firehawk PTC
Standard speaking
diaphragm
ClearCommand ready
Standard speaking
diaphragm
ClearCommand ready
Small
10084689
10084821
Small
10084690
10084822
Medium
10084823
10084825
Medium
10084824
10084826
Large
10084827
10084829
Large
10084828
10084830
Heads-Up Display
10083132
FireHawk M7 Receiver
Customer Service Center: 1-800-MSA-2222 • Website: www.MSAnet.com • QuickLit Fax Information: 1-800-672-9010
49
Self-Contained Breathing Apparatus
Emergency Egress System
Rescue Belt
Rescue Belt
In a continuation of MSA’s pursuit of firefighter safety, the
Rescue Belt is being introduced to the fire service. This is an
NFPA-compliant emergency egress system that is unique to
MSA. The belt can be integrated into the carrier and
harness assembly of the MSA Vulcan or Airframe Carrier
and Harness assemblies. A 50 foot or 75 foot Kevlar line with
a descender and caribiner is weaved into the belt to allow a
trapped fire fighter to escape to either the ground or to a
floor below the fire.
10052766
50' Standard Rescue Belt
10071003
50' Mid-Size Rescue Belt
10052767
50' Long Rescue Belt
10052768
75' Standard Rescue Belt
10071004
75' Mid-Size Rescue Belt
10052769
75' Long Rescue Belt
The belt is available in three lengths, standard (56 inches),
mid-size (66 inches) and long (76 inches).
Carrier & Harness Assembly
FireHawk M7 Carrier and Harness Assembly
FireHawk M7 Carrier and Harness Assemblies
The one component of any SCBA that has the
most impact on firefighter comfort is the
carrier and harness assembly. MSA is
introducing a new carrier and harness
assembly that places an emphasis on
firefighter comfort while maintaining the
robustness and reliability that is expected in
the fire service. The carrier and harness
comes standard with large side handles
and a central attachment point for pulling
firefighters to safety in rescue scenarios.
The swiveling lumbar pad provides maximum
freedom of movement and comfort when
crawling or climbing.
Part No.
10083128
Pressure
Low
High
Yes
Yes
Yes
Yes
X
X
10086662
10086664
Swiveling
Lumbar Pad
X
10083129
10086663
Chest
Strap
X
X
Yes
10086665
X
Yes
Accessories
The assembly utilizes the proven pieces from
previous generations of Air Masks such as the
tunneled shoulder straps for hose containment,
and tri-bar slides for easy removal/installation of the
waist belt and shoulder straps.
10083134
Replacement FireHawk M7 Lumbar Pad
10012167
Chest Strap
All units are equipped with double-pull waist belts and an optional chest strap is available.
Cylinders
Cylinders for SCBA
Carbon-Wrapped Cylinders
Carbon-wrapped Cylinders are the lightest SCBA air
cylinders ever developed by MSA. They feature a unique
outerwrap made of lightweight, high-performance carbon
fibers, which reduces cylinder weight by two to six pounds
when compared to fiberglass-wrapped cylinders and as
much as ten pounds when compared to aluminum cylinders.
They are available in five models to accommodate a wide
range of applications.
50
Part No.
Cylinder Type
(Cylinder & Valve)
807586
L-30
816115
NIOSH Service
Rating Life
Pressure
Weight*
(empty)
30'
2216 psig
7 lb – 9 oz.
L-30+
30'
3000 psig
9 lb – 14 oz.
469619
Fiberglass Hoop-Wound
30'
2216 psig
13 lb.
809872
Aluminum
30'
2216 psig
18 lb.
807587
H-30
30'
4500 psig
7 lb – 3 oz.
807570
H-45
45'
4500 psig
10 lb – 9 oz.
10035644
H-45 LP
45'
4500 psig
10 lb – 6 oz.
807588
H-60
60'
4500 psig
12 lb – 11 oz.
*All weights shown are approximate figures.
For more information see Bulletin 0108-11-MC. See Bulletin 0108-13-MC for information on
Custom-Logoed cylinders for your MSA Air Mask.
Customer Service Center: 1-800-MSA-2222 • Website: www.MSAnet.com • QuickLit Fax Information: 1-800-672-9010
Self-Contained Breathing Apparatus
MSA Accountability System
Accountability is key to every firefighter’s
safety on a fire scene. MSA’s new optional
Accountability System revolutionizes fireground
safety by combining the latest computer software
with a high-performance radio module and the
field-proven technology of MSA’s ICM Tx
Integrated PASS.
New!
A new way to monitor vital information
• Each MSA base station can monitor up to 50
firefighters, and you can use multiple base
stations on a single computer.
• The FireHawk M7 Air Mask with telemetry transmits to incident command the firefighter’s name,
team assignment, cylinder pressure, servicetime remaining, PASS alarms (motion or manual), thermal alarms, battery
status, radio connectivity, and evacuation acknowledgement.
A fireground management system
• Personalized ID tags for each firefighter tell incident command exactly who is on scene.
• An integrated PAR (personnel accountability report) timer helps manage radio calls to each
team.
• Incident command can manually add
firefighters who are not wearing an SCBA
or mutual aid firefighters, so all personnel can
be accounted for.
Intuitive and easy to use
• Assign firefighters to teams by clicking on a firefighter’s icon and dragging it to another team.
• A volume of critical information is available at a
glance of the screen, due to the large number of
firefighters that can be displayed and the
pictorial format of the information.
• Receive both audible and visual indications
of critical events such as PASS alarms or lowpressure alarms.
• Incident command is assured that firefighters
receive all evacuation messages. When
incident command transmits the alarm
through the FireHawk M7 Air Mask, they’ll know
the firefighter received it, because the unit automatically sends a confirmation message to the
base station.
• By simply pressing a button on his/her own
control module, a firefighter can send a manual
confirmation to acknowledge that they have received and understand the critically important
evacuation message.
• Firefighters will hear the evacuation alarm on
their own personal PASS device. Also, visual indications in the HUD and an icon on the
control module will alert the firefighter that it is
time to evacuate.
• An individual firefighter, a team of firefighters, or
all firefighters can be evacuated with the click
of a button.
• Although certain concrete and steel
commercial structures can challenge any
radio signal, MSA’s Accountability System
coverage with radio technology provides
highly reliable performance for a 1-mile
line-of-sight range.
• Due to the spread-spectrum design, it does
not interfere with other high-band radio
frequency equipment.
• For additional safety, both base station and
firefighter modules have an icon message to inform users if a firefighter falls out of radio
signal range, so that alternate accountability
measures, such as voice radio contact with
teammates, can be taken.
A two-way evacuation feature
Accountability System
MSA’s new M7 Accountability System revolutionizes fireground safety by combining the latest computer software
with a high-performance radio module and the field-proven technology of MSA’s ICM TxR Integrated PASS.
10072240
Accountability Base Station Kit (includes software, antenna kit, USB cable and 8-24 volt power cable)
10083876
M7 Control Module Reader / M7 ID tag writer
10083875
M7 ID tags
10075756
Antenna kit
10063880
USB cable
10049410
8-24 volt, power cable
10047342
Wall mount power cable (not included in 10072240 kit)
Customer Service Center: 1-800-MSA-2222 • Website: www.MSAnet.com • QuickLit Fax Information: 1-800-672-9010
51
Self-Contained Breathing Apparatus
Emergency Breathing Systems
The Quick-Fill® System
The Quick-Fill System
Replacement Parts for the Quick-Fill System
485366
EBS hose package, includes 3-foot emergency transfill hose in Kevlar pouch
485331
Emergency transfill hose, less Kevlar pouch
485390
Kevlar pouch
485391
Male stainless steel quick-disconnect with SAE-10 thread, complete with
dust cover (also for use as a fitting for customized refilling systems)
485392
Female quick-disconnect with SAE-4 thread, complete with dust cover
Quick-Fill Hoses
The patented Quick-Fill System lets MSA Air Mask users refill
and transfill air cylinders while the SCBA is worn, without removing the air cylinder—even in IDLH atmospheres. Use this
MSA-exclusive option to:
• Fill an SCBA cylinder from a mobile compressor or cascade
system in less than a minute.
• Transfill between two cylinders, providing an Emergency
Breathing System.
• Extend the air supply over longer durations, using a remote
compressed-air source.
Because performance is not affected, MSA Air Masks retain
NIOSH certification during use of the Quick-Fill System.
25-ft lengths are stocked; other “custom lengths” are available on a special material
basis. All SAE Fittings are for high-pressure service. Female quick-disconnect fittings
have dust covers.
25 ft
12 ft
10 ft
8 ft
6 ft
3 ft
485332
802690
802689
802688
802687
485331
FQD x FQD
487907
802677
802675
802673
802671
492796
FQD x CGA-347 Outlet
487909
802685
802683
802681
802679
487427
FQD x CGA-347 CN
487906
802704
802703
802702
802701
802705
FQD x SAE-4
487908
802678
802676
802674
802672
492797
FQD x CGA-346 Outlet
487910
802686
802684
802682
802680
487428
FQD x CGA-346 CN
Air Masks compliant to recent NFPA standard have the
Quick-Fill URC fitting located at the Audi-Larm warning device.
A Quick-Fill hose with a quick-disconnect connects the air
source to the adapter for air transfer. See Bulletin 0105-92-MC
for a Question & Answer overview of Quick-Fill Systems.
RescueAire™ II
Portable Air-Supply System
The RescueAire II Portable Air Supply System is
designed to meet the needs of Rapid Intervention
Teams (RITs). The system consists of a lightweight
Carbon-Wrapped cylinder, Quick-Fill® emergency
breathing system, ExtendAire™ emergency breathing system, and an MMR regulator, supported by a
flame- and heat-resistant harness. The RescueAire
is a complete system that can provide emergency
breathing air for most any victim.
The RescueAire II System is available in both lowpressure (2216 psig) and high-pressure (4500 psig)
versions. An optional-use shoulder strap is also
provided for hands-free carrying.
The ExtendAire™ System
The ExtendAire System can be used as both an
emergency breathing system and a dual-purpose
device for MMR SCBA to allow firefighters to
quickly and easily connect to an air-line.
RescueAire™ II Portable Air-Supply System
with L-30
cylinder
less
cylinder
Low-Pressure (2216 psig)
10025491
10033312
RescueAire II with L-30 Cylinder
10041196
10041198
RescueAire II, Firehawk STC MMR
10041230
10041232
RescueAire II, Firehawk PTC MMR
with H-60
cylinder
less
cylinder
High-Pressure (4500 psig)
10025462
10025492
RescueAire II with H-60 Cylinder
10041195
10041197
RescueAire II, Firehawk STC MMR
10041199
10041231
RescueAire II, Firehawk PTC MMR
The ExtendAire™ System
812958
ExtendAire Air-line Hose with foster plug
812973
40" Rescue Hose
10031798 ExtendAire Upgrade Kit for Threaded Firehawk MMR
10031797
52
ExtendAire Upgrade Kit for Quick-Connect
Firehawk MMR
Customer Service Center: 1-800-MSA-2222 • Website: www.MSAnet.com • QuickLit Fax Information: 1-800-672-9010
Self-Contained Breathing Apparatus
How to Order SCBA: Get the Exact Model You Need
The Assemble-To-Order System
MSA’s Assemble-To-Order System (ATO) will make ordering the right mask easier and faster than ever. Instead of choosing from a handful of complete
Air Mask assemblies, users can order a custom-made Air Mask with every option exactly as desired. Contact MSA Customer Service Center for details.
Air Mask
Air Mask
Pressure
L
M
H
2216
3000
4500
Carrier/
Harness
Assembly
Lumbar Pad/
Rescue Belt
Cylinder
A Single Pull
without
chest strap
0 None
0 None
1 Swiveling
Lumbar Pad
1 3AL Aluminum with air
B Single Pull with
chest strap
A Rescue Belt Standard, 50'
C Double Pull
without
chest strap
B Rescue Belt Mid-Size, 50'
D Double Pull with
chest strap
Options A & B can
only be chosen if
a rescue belt is
selected.
C Rescue Belt Long, 50'
D Rescue Belt Standard, 75'
2 Hoop Wrapped with air
3 30' Carbon with air
4 3AL Aluminum less air
5 Hoop Wrapped less air
6 30' Carbon less air
MMR Type
A
CBRN Firehawk
STC, threaded,
B
CBRN Firehawk
STC, QC,
C
D
CBRN Firehawk
PTC, threaded,
CBRN Firehawk
PTC, QC,
Facepiece
Nosecup
Head Harness
Electronic
Communications
Integrated Pass/Telemetry
0
None
A
None
0
None
0
None
A None
A
1
Quick-Fill
B
Hycar
Small
1
Medium
2
SpeeD-ON
less neck
strap
B Clear Command Ready
C with bracket
B
2
3
ExtendAire
Quick-Fill and
ExtendAire
M is not
compatible with
Quick-Fill
C
Hycar
Medium
D
Hycar
Large
2
Large
4
SpeeD-ON
with neck
strap
D Clear Command Amp
Clear Command Amp/RI C
D
PASS with
0
thermal alarm activated 1
PASS without
thermal alarm activated 2
PASS, telemetry
and thermal alarm
Case
None
Hard
Case
Soft
Case
PASS, telemetry and
without thermal alarm
0 None
1 30+ Carbon with air
E Rescue Belt Mid-Size, 75'
2 30+ Carbon less air
F Rescue Belt Long, 75'
0 None
If choosing a
rescue belt, the
carrier/harness
assembly must
be a single pull
(options A or B).
Emergency
Breathing
Support
1 30' Carbon with air
2 45' Carbon with air
3 45' Carbon low-profile with air
4 60' Carbon with air
5 30' Carbon less air
6 45' Carbon less air
7 45' Carbon low-profile less air
8 60' Carbon less air
A-M7
Customer Service Center: 1-800-MSA-2222 • Website: www.MSAnet.com • QuickLit Fax Information: 1-800-672-9010
53
Self-Contained Breathing Apparatus
BlackHawk® MMR Self-Contained Breathing Apparatus Assemble-To-Order (ATO) Matrix
SCBA Type
Carrier/
Harness
Assembly
BL 2216
A Kevlar
BlackHawk
Air Mask
B Kevlar
with
Chest
Strap
C Kevlar
with
BH 4500
Shoulder
BlackHawk
Pads
Air Mask
D Kevlar
with
Shoulder
Pads and
Chest
Strap
Lumbar Pad/
Rescue Belt†
MMR
Regulator
Type
Cylinder
0
None
0 None
1
Lumbar Pad
1 30' Carbon
2
Swiveling
Lumbar Pad
2 30' Carbon
less Air
G Firehawk
PTC, Solid
Cover
C
2 45' Carbon
Low-Profile
D Rescue Belt Long 75'
Swiveling Rescue
Belt - Standard 50'
F
Swiveling Rescue
Belt - Standard 75'
G Swiveling Rescue
Belt - Long 50'
A None
Quick-Fill
Shoulder
Mounted
B Ultra Elite 1 Med
Hycar,
Small
2 Large
4 30' Carbon
less Air
5 45' Carbon
Low-Profile
less Air
C
0 None
Ultra Elite
Hycar,
Medium
Head
Communications
Harness
0 None
1 Rubber
Option R can
only be chosen
if a Hycar
facepiece
is selected
E
Ultra Elite
Silicone,
Small
F
Ultra Elite
Silicone,
Medium
A Standard
Speaking
Diaphragm
HUD
Options
1 NightFighter
HUD
2 SpeeD- B ClearCommand
On
Ready
Case
0 None
1 Hard
Case
2 Soft
Case
C ClearCommand Amp
D Ultra Elite
Hycar,
Large
5 Snap-Tite
Locking
Aluminum
3 60' Carbon
E
None
1
4 Foster
Steel
1 30' Carbon
Rescue Belt Long 50'
0
1 Snap-Tite
Aluminum
3 Hansen
Brass
0 None
B Rescue Belt Standard 75'
Facepiece Nosecup
0 None
R Firehawk
PTC, Solid
2 Hansen
Cover, CBRN
SST
A Rescue Belt Standard 50'
Emergency
Breathing
System
Air-Line
Options
D ClearCommand
Amp/RI
(Less PTT)
G Ultra Elite
Silicone,
Large
6 60' Carbon
less Air
H Swiveling Rescue
Belt - Long 75'
†
Note: Standard Rescue Belt fits waist sizes
up to 54 inches. Long Rescue Belt fits waist
sizes up to 74 inches.
C
Part Number
AirHawk® MMR Self-Contained Breathing Apparatus Assemble-To-Order (ATO) Matrix
Carrier/
Harness
SCBA Type
AL
AirHawkMMR
(2216 psig)
A
B
C
D
AH
AirHawkMMR
(4500 psig)
Nylon
without
chest
strap
Nylon
with
chest
strap
Kevlar
without
chest
strap
Kevlar
withchest
strap
Pad Options
0
1
2
3
4
5
None
Shoulder
Pad
Lumbar Pad
Shoulder
Pad & Lumbar Pad
Swiveling
Lumbar Pad
Swiveling
Lumbar Pad
& Shoulder
Pad
Cylinder
0
1
2
3
None
3AL
Aluminum
HoopWound
30' Stealth
MMR
Regulator Type
G
Firehawk
PTC with
Swivel &
Solid Cover
Air-Line
Option
0
1
2
3
4
5
6
None
Snap-Tite
Aluminum
Hansen SST
Hansen
Brass
Foster Steel
Snap-Tite
Locking
Aluminum
Foster SST
A
B
C
D
E
F
G
0
1
2
3
None
30' Stealth
45' Stealth
Low Profile
60' Stealth
H
I
J
K
L
M
B
54
Facepiece
Nosecup
None
Ultra Elite,
Hycar, Small
Ultra Elite,
Hycar, Medium
Ultra Elite,
Hycar, Large
Ultra Elite,
Silicone, Small
Ultra Elite,
Silicone, Medium
Ultra Elite,
Silicone, Large
Advantage 4000,
Hycar Small
Advantage 4000,
Silicone Small
Advantage 4000,
Hycar Medium
Advantage 4000,
Silicone Medium
Advantage 4000,
Hycar Large
Advantage 4000,
Silicone Large
0
1
2
None
Med
Large
Head
Harness
0
1
2
3
4
None
Rubber
SpeeDON
Silicone
Net
PASS
0
Gauge
Case
0
1
2
None
Hard
Case
Soft
Case
Part Number
Customer Service Center: 1-800-MSA-2222 • Website: www.MSAnet.com • QuickLit Fax Information: 1-800-672-9010
Self-Contained Breathing Apparatus
ClearCommand® HCS Helmet Communication System
The Helmet Communication System
from MSA is a state-of-the-art radio
interface device which significantly
improves the user’s ability to receive
and send messages even in loud
ambient-noise environments. It
goes wherever you go. The system
consists of a helmet-mounted
microphone and ear speaker
assembly that weighs 5.3 ounces
and easily snaps onto the user’s fire
helmet or industrial-style helmet’s
ratchet suspension. The helmet
mic/ear speaker assembly connects
to a lapel microphone or optional
stand-alone PTT (push-to-talk) unit.
The lapel microphone and PTT are
permanently fitted with a connector
for attachment to the specific radio
of choice. The Helmet Communication System also offers a plug-in truck communication
adapter that can be used by firefighters, along with their helmet microphone assembly,
on the way to a fire scene or other incident. Once the firefighter arrives at the scene, the truck
system cable is unplugged from the helmet microphone, and the helmet microphone cable end
is connected to the user’s lapel mic or PTT.
The user of the Helmet Communication System has uninterrupted communication from the
time the alarm sounds until the incident is over.
For more complete information, see Bulletin 3639-01-MC.
Helmet Microphone Assembly
10042902
Helmet Microphone Assembly (includes
Custom Fitted Flannel Headband Liner)
Lapel Mic Kits for Radio Interface*
10042908 Maxon SP120, SP130, SP140
10042909
Motorola HT600, MT1000, MTX820,
MTX900, Radius P200 & P500
10042903
Motorola HT1000, JEDI, MT2000, MTS2000,
MTX838, MT839, MTX8000, MTX9000
10042904 Motorola Astro and Saber
10042905
Motorola Radius GP300, P110, SP50,
LTS2000, Spirit-III, GTX, SP21
10042912 Motorola STX, MX800, MX840
10042906 GE Ericsson PCS, PC2005
10042907 GE Ericsson MRK, LPE-200, Prism, PX 126T
Stand-Alone PTT Kits for Radio Interface*
10045667 Maxon SP120, SP130, SP140
10045668
Motorola HT600, MT1000, MTX820,
MTX900, Radius P200 & P500
10045662
Motorola HT1000, JEDI, MT2000, MTS2000,
MTX838, MT839, MTX8000, MTX9000
10045663 Motorola Astro and Saber
10045664
Motorola Radius GP300, P110,
SP50, LTS2000,Spirit-III, GTX, SP21
10045669 Motorola STX, MX800, MX840
10045665 GE Ericsson PCS, PC2005
Helmet Mic with
Stand-Alone PTT
Helmet Mic
with Lapel Mic
10045666 GE Ericsson MRK, LPE-200, Prism, PX 126T
Truck System
10045732 Nexus Adapter, D. Clarke
10045731 Phonejack Adapter, D. Clarke
Parts and Accessories
10046087 Dust Cover
Features & Benefits
• Incorporates a “noise-eliminating” boneconduction voice transmitter that virtually
eliminates high ambient noise levels.
• Custom user-fitted ear speaker brings all
incoming communication directly to the
user’s ear. No need to lift your lapel mic up
to your ear to hear transmission.
• Easily snaps onto the ratchet suspension
of fire helmets or industrial-style helmets.
The unit can be easily transferred to other
users, and no tools are required for
removal.
• Can be used over the top of facepiece head
harnesses, hoods and liners without losing
the quality of the transmission.
• The bone-conduction microphone is
made of soft silicone material, which makes
it comfortable to wear, with no pressure
points.
• The helmet microphone assembly can be
reversed on the helmet suspension to
position the ear speaker on either ear.
10046123 Guard Ring, Tall
• The helmet mic system, when used with the
lapel mic or PTT, is powered by the battery
from the radio. No need to replace or
re-charge dry cells.
• Special connectors suitable for most
common radios are available for the lapel
microphone and PTT, which allows users
to adapt the system to their existing radios.
• The helmet mic is NFPA-certified which
allows its use while fighting fires.
• Intrinsic safety approvals allow the use
of the Helmet Communication System in
hazardous environments.
• The stand-alone PTT unit is designed for
use under hazardous material suits. The
large button makes it easy for the user to
depress and communicate.
• The helmet mic incorporates a cable
keeper which allows for storage of the
cable when it’s not connected to the lapel
mic or PTT.
10046122 Guard Ring, Short
10046089 Belt Clip Assy, Standard
10046120 Belt Clip Assy, Clothes Pin Type
10046121 O-Ring, Single Pin Connector
10045778 Flannel Head Band Liner
*If your specific radio is not listed, please contact MSA Customer Service.
Customer Service Center: 1-800-MSA-2222 • Website: www.MSAnet.com • QuickLit Fax Information: 1-800-672-9010
55
Self-Contained Breathing Apparatus
ClearCommand® Communications System for Ultra Elite® Facepieces
MSA’s ClearCommand Communications System
is designed specifically to meet the modern
communications needs of firefighters.
Because it’s available in two versions, amplifier
and amplifier with radio interface, firefighting
teams can be properly fitted for the job at hand.
Also, the systems are designed for “shareduse” of the amplifier with a unique “bus-bar”
arrangement, so individual issue is not
required.
The ClearCommand systems feature an
internally mounted microphone coupled with a
large-diameter (50mm) amplifier speaker for
optimal clarity and volume. Using a proprietary
circuit design, the system delivers more than
twice the volume of a facepiece alone.
Mounted in an “out-of-the-way” position, the
ClearCommand System doesn’t block vision or
mechanical communication. The Ultra Elite’s
mechanical voicemitter is still fully functional, even with the system installed.
The radio interface version features the same amplifier as the amp-only version, combined with
an ear-speaker for incoming radio messages and a lapel mic assembly for interface with over
100 radios. The lapel mic can be used as a component of the ClearCommand system or as a
stand-alone hand mic.
Both the amplifier and radio interface models are intrinsically safe, and meet the applicable
requirements of NIOSH and NFPA 1981, 2002 edition.
Field Maintenance and Repair
MSA offers a complete program
for maintenance and repair of
MSA Air Masks.
The program is supported
with personalized training
tailored to customers’ needs
and taught in the field by
MSA-authorized personnel.
User maintenance covers procedures necessary to
conduct general cleaning, inspection, and limited
maintenance in accordance with the Occupational
Safety and Health Administration (OSHA), National Fire Protection Association (NFPA),
and the American National Standards Institute (ANSI) standards.
C.A.R.E. Certified Air Mask Repair Education covers all maintenance for both low- and
high-pressure SCBA. Air Mask inspection and maintenance can be performed by MSA
or a factory-authorized service center. Or, individuals can obtain training for C.A.R.E
certification from MSA. By having a C.A.R.E-certified technician on staff, fire departments and other facilities with a large number of Air Masks can perform all inspection
and maintenance in-house.
• All repairs and maintenance can be done in the field.
• A selection of overhaul kits, spare parts, and tool kits is available.
• Users may conduct periodic performance testing using an authorized MSA
regulator tester.
56
ClearCommand System Kits
10024074
Amplifier Kit, complete with microphone
10051290
Amplifier Radio Interface Kit,
w/ microphone, less PTT
10023055
Microphone Kit, with mounting bracket
Lapel Mic Kits for Radio Interface*
10042908
Maxon SP120, SP130, SP140
10042909
Motorola HT600, MT1000, MTX820,
MTX900, Radius P200 & P500
10042903
Motorola HT1000, JEDI, MT2000, MTS2000,
MTX838, MT839, MTX8000, MTX9000
10042904
Motorola Astro and Saber
10042905
Motorola Radius GP300, P110, SP50,
LTS2000, Spirit-III, GTX, SP21
10042912
Motorola STX, MX800, MX840
10042906
GE Ericsson PCS, PC2005
10042907
GE Ericsson MRK, LPE-200, Prism, PX 126T
Stand-Alone PTT Kits for Radio Interface*
10045667
Maxon SP120, SP130, SP140
10045668
Motorola HT600, MT1000, MTX820,
MTX900, Radius P200 & P500
10045662
Motorola HT1000, JEDI, MT2000, MTS2000,
MTX838, MT839, MTX8000, MTX9000
10045663
Motorola Astro and Saber
10045664
Motorola Radius GP300, P110,
SP50, LTS2000,Spirit-III, GTX, SP21
10045669
Motorola STX, MX800, MX840
10045665
GE Ericsson PCS, PC2005
10045666
GE Ericsson MRK, LPE-200, Prism, PX 126T
Truck System
10045732
Nexus Adapter, D. Clarke
10045731
Phonejack Adapter, D. Clarke
Parts and Accessories
10046087
Dust Cover
10046123
Guard Ring, Tall
10046122
Guard Ring, Short
10046089
Belt Clip Assy, Standard
10046120
Belt Clip Assy, Clothes Pin Type
10046121
O-Ring, Single Pin Connector
10045778
Flannel Head Band Liner
*If your specific radio is not listed, please contact MSA Customer
Service.
Customer Service Center: 1-800-MSA-2222 • Website: www.MSAnet.com • QuickLit Fax Information: 1-800-672-9010
Self-Contained Breathing Apparatus
SCBA Accessories
APR Adapter
APR Adatpers
MSA’s APR adapter provides firefighters with the
versatility they need to perform all tasks at the fire
ground with one common facepiece. From
fire-fighting to overhaul to homeland security,
firefighters can switch from a positive-pressure
facepiece to a negative-pressure air-purifying
respirator simply by engaging the APR Adapter.
The APR Adapter uses MSA’s comprehensive
family line of air-purifying cartridges; select
from the Advantage cartridges or our CBA/RCA
canisters to protect against a multitude of
airborne contaminants.
Firehawk MMR STC Version
The APR Adapter is designed for use in non-IDLH
environments and is NIOSH-approved. Contact
MSA for more information.
Accessories
10032511 APR Adapter
10032927 APR Adapter Individual Kit
10032925 APR Adapter Truck Kit
Firehawk MMR PTC Version
10040052 APR Adapter
10040055 APR Adapter Individual Kit
10040054 APR Adapter Truck Kit
10037809 Ultra Elite, Anti-Fog Applique (10/pkg)
Spectacle Kit for Full-Facepiece Respirators
For use by workers who must wear
corrective lenses, the Spectacle Kit can
be easily inserted into the facepiece. The
kit includes a wire support, rubber guide,
and pair of metal-frame spectacles.
There are two kits for the Ultra Elite
facepiece; one uses a side wire support
to hold the lenses in the facepiece, while
the other uses a center support to
position the unit. Desired adjustment is
Side-Support Spectacle Kit Center-Support Spectacle Kit
obtained by moving the spectacles in and for Ultra Elite® Facepiece for Ultra Elite® Facepiece
out of the rubber guide and up and down the wire support. One size of spectacle frame
is used (S-7 shape, 48-mm lens size) with Universal Bridge Corrective Lenses that can be
obtained from local sources. The Spectacle Kit can be used with a nosecup.
10037810 Ultravue, Anti-Fog Applique (10/pkg)
817590
CBA/RCA Canisters (box of 6)
809858
Replacement Baffle
813341
Replacement Bayonet Cover
Spectacle Kits
804638
Ultra Elite Spectacle Kit (side wire support)
493581
Ultra Elite Spectacle Kit (center support)
Nosecups
495188
Medium Black Nosecup
495189
Large Black Nosecup
High-Pressure Filling Hose
Nosecups
High-Pressure Filling Hose
476105
Molded from a soft
rubber compound
that is resistant to
facial oils, the optional
nosecup helps reduce the
possibility of lens fogging. The nosecup is
particularly effective under conditions of high
humidity and/or low temperatures by inhibiting
contact of moist exhaled air with the facepiece
lens. A nosecup can be easily affixed to the
facepiece without tools. Any size nosecup may
be installed in any size Ultra Elite Facepiece for
a customized, more comfortable fit.
Provides a
convenient means
to connect and
charge highpressure air into a
high-pressure 4500
psig cylinder.
Accessories for Filling Low-Pressure
(2216 psig) Cylinders
Accessories for Filling
Low-Pressure (2216 psig)
Cylinders
High-Pressure Filling Hose Assembly
68846
Air Outlet Connection, complete w/ Gauge
68850
Air Coupler Tee
68851
Air Pigtail
476156
Low-Pressure Air-Filling Hose, 5 feet long
Shop Online for MSA Gear
MSA FireSlayer and Be Ready promotional items are available to anyone via MSA's Internet site. Sporting appropriate logos are
shirts, duffels, caps, golf items, mugs, money clips, lighters and more. The Fireslayer logo helps promote our products to the firefighting market, while the Be Ready logo is aimed at Homeland Security. Look for the "MSA Gear"
link in the Resources & Info area after selecting MSA North America; MSA United States from
the MSA homepage at MSAnet.com.
®
After making your selections, complete the shipping information and furnish a credit card
number. Your order will be processed, and you should receive it within a week. Express service
is also available.
Customer Service Center: 1-800-MSA-2222 • Website: www.MSAnet.com • QuickLit Fax Information: 1-800-672-9010
57
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement