null  null
7" Dual Screen Mobile DVD System
DRC99731
1.
2. 3. 4. 5. 6. 7. 8. 9. 10.
AVC Multimedia
Markham, Ontario L3R 1E3
http://www.RCAav.com
11.
12.
Read these instructions before using your new product for the first time.
Safety Precautions
The lightning flash with an arrowhead symbol,
within the equilateral triangle, is intended to
alert the user to the presence of uninsulated
"dangerous voltage" within the produc t's
enclosure that may be of sufficient magnitude to
cause an electric shock.
The exclamation point within the equilateral
triangle is intended to alert the user to the
presence of important operating and maintenance
(servicing) instructions in this owner’s manual.
* SEE BACK OF UNIT FOR GRAPHIC SYMBOLS *
This product
contains a low
power laser device.
WARNING: TO REDUCE THE RISK OF
ELECTRIC SHOCK, DO NOT REMOVE
COVER (OR BACK). NO USER-SERVICEABLE
PARTS INSIDE. REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
WARNING: TO PREVENT FIRE OR SHOCK
HAZARD, DO NOT EXPOSE THIS APPLIANCE TO
RAIN OR MOISTURE. DO NOT PLACE OBJECTS
FILLED WITH LIQUIDS ON OR NEAR THIS UNIT.
C A U T I O N : U se of controls or
adjustments or performance of
procedures other than those specified
may result in hazardous radiation
exposure.
CAUTION: DANGER OF EXPLOSION IF BATTERY
IS INCORRECTLY REPLACED. REPLACE ONLY
WITH THE SAME OR EQUIVALENT TYPE.
CAUTION
INVISIBLE LASER RADIATION
WHEN OPEN.
AVOID EXPOSURE TO BEAM.
T H I S C L A S S B D I G I TA L A P PA R AT U S
COMPLIES WITH CANADIAN ICES-003.
On Placement
• Do not use the unit in places that are extremely hot, cold, dusty, or humid.
• Place the unit on a flat and even surface.
• Do not restrict the air flow of the unit by placing it in a place with poor air flow, by covering it with a cloth, or by
placing it on carpeting.
• To avoid magnetized, do not place the unit near speaker or magnet.
• Do not use this unit in direct sunlight or leave the unit in a closed automobile (or yacht, etc) where it would be
exposed to high temperatures above 104°F (40°C).
• No naked flame sources such as lighted candles should be placed on the car power adapter and main unit.
• The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases,
shall be placed on apparatus.
On Safety
• When connecting or disconnecting the car power adapter, grip the plug and not the cord itself. Pulling the cord
may damage it and create a hazard.
• When you are not going to use the unit for a long period of time, disconnect the car power adapter.
On Condensation
• When left in a heated room where it is warm and damp, water droplets or condensation may form inside the unit.
When there is condensation inside the unit, the unit may not function normally. Let the unit stand for 1 to 2 hours
before turning the power on, or gradually heat the room and allow the unit to dry before use.
Rating Plate and Marking Information Location
• The rating plate and marking information are located on the back of unit.
FCC Statements
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in
a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.
Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
WARNING:
• Should any trouble occur, disconnect the AC power adapter and refer servicing to a qualified technician.
• The AC/DC adaptor is used as disconnect device.
• The AC/DC adaptor of apparatus should not be obstructed OR should be easily accessed during intended used.
• To be completely disconnect the power input, the AC/DC adaptor of apparatus shall be disconnected from
the mains.
Notes on Copyright
It is forbidden by law to copy, broadcast, show, broadcast on cable, play in public, or rent copyrighted material
without permission.
Apparatus Claims of U.S. Patent Nos. 6,836,549; 6,381,747; 7,050,698; 6,516,132 and 5,583,936 licensed for limited
viewing uses only.
This product incorporates copyright protection technology that is protected by U.S. patents and other intellectual
property rights. Use of this copyright protection technology must be authorized by Macrovision, and is intended
for home and other limited viewing uses only unless otherwise authorized by Macrovision. Reverse engineering or
disassembly is prohibited.
E-1
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use this apparatus near water.
Clean only with a dry cloth.
Do not block the ventilation openings. Install in accordance with the manufacturer's instructions.
Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including
amplifiers) that produce heat.
Do not defeat the safety purpose of the polarized or grounding - type plug. A polarized plug has two
blades with one wider than the other. A grounding type plug has two blades and a third grounding
prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit
into your outlet, consult an electrician for replacement of the obsolete outlet.
Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles,
and the point where they exit from the apparatus.
Only use attachments/accessories specified by the manufacturer.
Use only with a cart, stand, tripod, bracket, or table specified by the manufacturer, or sold
with the apparatus. When a cart is used, use caution when moving the cart/apparatus
combination to avoid injury from tip-over.
13. Unplug this apparatus during lightning storms or when unused for long periods of time.
14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been
damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate
normally, or has been dropped.
Disc Formats
This unit can play
DVDs
[8cm/12cm disc]
Audio CDs
[8cm/12cm disc]
Compatible
Region Management Information
Region Management Information: This unit is designed and manufactured to respond to the Region Management
Information that is encoded on DVDs. If the region number printed on the DVD does not correspond to the region
number of this unit, it cannot play that disc.
The region number of this unit is 1.
Disc Function or Operation that is Not Available
When the symbol appears on the screen, it indicates that the function or operation attempted is not available at
that time. This occurs because the DVD manufacturer determines the specific functions of DVDs. Certain functions
may not be available on some DVDs. Be sure to read the documentation provided with the DVD.
Icons Used on DVDs
Language selections for audio
Sample lcons
Note:
When playing back a CD-G (Graphics) or CD EXTRA
disc, the audio portion will be played, but the graphic
images will not be shown.
Language selections for subtitles
Screen aspect ratio
Multiple camera angles
Region code indicator
Title, Chapter and Tracks
• DVDs are divided into “titles” and “chapters”. If the disc has more
than one movie on it, each movie would be a separate “title”.
“Chapters” are sections of titles.
Title1
Chapter1
Title2
Chapter2
Chapter3
Chapter1
Chapter2
• Audio CDs are divided into “tracks”. A “track” is usually one song on
Track1
Track2
Track3
Track4
Track5
an Audio CD.
Note:
Numbers identify each title, chapter, and track on a disc. Most discs have these numbers recorded on them, but
some do not.
Notes on Unauthorized Discs
You may not be able to play some DVDs on this unit, particularly if they were purchased from outside your
geographic area or made for business purposes.
Sound System
TO CHANGE REMOTE BATTERY
1. Open the battery door.
2. Insert one CR2025 (3V) size battery.
BATTERY REPLACEMENT
When the battery becomes weak,
the operating distance of the remote
control will be greatly reduced and you
will need to replace the battery.
Notes:
• If the remote control is not going to be used for a long time, remove the battery to avoid damage caused by
battery leakage corrision.
• When discarding batteries, environmental problems must be considered and local rules or laws governing the
disposal of these batteries must be strictly followed.
WARNING: Do not dispose of the battery in a fire or it may leak and/or explode.
WARNING: Batteries shall not be exposed to excessive heat such as sunshine, fire or the like.
CAUTION: Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type.
Control Reference Guide
Dolby Digital is a technology developed by Dolby Laboratories. Soundtracks encoded in Dolby Digital can reproduce
from one to 5.1 discrete channels of excellent quality audio.
The unit automatically recognizes the Dolby Digital bitstream and provides a downmix suitable for two-channel
listening. An additional Dolby Digital decoder is required for reproduction of the discrete multi-channel soundtracks
available on many DVDs.
Manufactured under license from Dolby Laboratories.
"Dolby" and the double-D symbol are trademarks of Dolby Laboratories.
Accessories
Please check and identify the supplied accessories.
Remote Control (with battery)........................................................................................................................................................ x 1
Car Power Adapter............................................................................................................................................................................... x 1
Mounting Strap..................................................................................................................................................................................... x 2
DC-AV Cable........................................................................................................................................................................................... x 1
Remote Control
Using the Remote Control
• Point the remote control at the REMOTE SENSOR located on
the unit.
• When there is a strong ambient light source, the perform­ance
of the infrared REMOTE SENSOR may be degraded, causing
unreliable operation.
E-2
Remove the PLASTIC
sheet before using
the Remote Control.
DC OUT 9V-12V Jack
AUDIO & VIDEO IN Jacks
VOLUME Control
Adjusts the volume.
Headphone Jack
LCD Screen
BRIGHTNESS Control
Adjusts the relative lightness or
darkness of the screen.
7) COLOR Control
Adjusts the color intensity.
8) Screen Switch
WIDE: Wide-screen format
NORMAL: Pan & scan (fullscreen) format
9) OFF/ON Switch
10) DC IN 9V-12V Jack
5
6
7
8
9
10
4
3
2
1
11
12
11) STANDBY Indicator
When the OFF/ON switch is in ON position, the light will
illuminate.
12) Stand
1) VIDEO MODE Button
Adjusts Brigntness, 16:9 Screen/4:3 Screen or
Contrast of the LCD screen.
PREV Button
2)
Goes back to current or previous titles/chapters/
tracks.
/ SEARCH Buttons
3)
SEARCH: Fast reverse playback.
SEARCH: Fast forward playback.
4) GOTO Button
Skips directly to a location on a CD/DVD.
5) Cursor ( , , , ) Buttons
Use to move between selections on a menu screen
and adjust certain settings.
ENTER Button
Confirms selections on a menu screen.
6) MEMORY Button
In PLAY mode, sets titles/chapters in a favorite order.
7) Number (0 - 9) Buttons
Use when creating programs and locating a title/
chapter/track or specific time.
8) REPEAT A-B Button
Performs point-to-point repeat playback on a DVD
or CD.
REPEAT DISC Button
Repeats a DVD chapter or title.
Repeats a CD track or the entire disc.
SETUP Button
Opens and closes the SETUP menu while in stop
mode.
9) MENU Button
Opens and closes the DVD menu.
10) NEXT Button
Advances titles/chapters/tracks.
11) STOP Button
Stops playing a disc.
PLAY Button
Starts or resumes playback of a disc.
PAUSE Button
Pauses playback of a disc. Each time you press the
PAUSE button the picture advances one frame
1. Connect your TV to the DVD player using a
standard AV Cable (not included).
2. Turn on the TV and follow the instructions
included with it to play the DVD.
TV
Notes:
• Make sure to use the correct Audio/Video cable.
Connecting the plugs incorrectly may cause a
weak signal.
• If your TV does not have Audio/Video inputs,
you will need to purchase an RF modulator (sold
separately) and follow the instructions included DVD player
with it to connect the unit to your TV.
right side
Listening on External Audio Equipment
The included 12V car power adapter is designed for use with vehicles that have a 12V, negative ground electrical system.
IMPORTANT
Using the DVD Player and the Monitor Together
This car adapter is for use with 12 volt batteries only.
DVD player
right side
Monitor left side right side
4
DC-AV cable
(included)
To 12V
power outlet
Car Power
Adapter
DVD player
1. Connect the DVD player to the left/right right side
Audio In jacks on the other equipment using a
standard Audio cable (not included).
2. Turn on your audio equipment and follow
the instructions provided with it to select the
AUDIO IN function.
Notes:
• Make sure to use the correct Audio cable.
Connecting the plugs incorrectly may cause a
weak signal.
• If you have a stereo VCR, make sure you set it to
stereo mode.
• Due to copyright protection, DVD movies
cannot be copied. If you copy a DVD movie onto
a videotape, the resulting copy will be unclear,
with poor sound quality. This is NOT caused by a
defective DVD system.
AV cable
(not included)
DO NOT CONNECT
DO NOT CONNECT
D. Connecting Game Systems/Video Equipment (for the Monitor Only)
3
1
on a DVD. Press the
PLAY button to resume
playback.
12) DISPLAY Button
Shows status information on the screen.
13) ANGLE Button
Switches between multiple camera angles
when the DVD you are playing has been
programmed with multiple camera angles.
14) AUDIO Button
S e l e c t s o n e o f t h e a u d i o s o u n d t ra c k s
programmed on a DVD or select the audio
output mode on an Audio CD.
15) SUBTITLE Button
Selects one of the subtitle languages
programmed on a DVD (if available).
RETURN Button
Returns to normal operation after using the
SETUP menu of a DVD.
To A/V OUT &
DC IN 9V-12V
jacks
To A/V IN &
DC OUT 9V-12V
jacks
2
You can connect game systems or other video equipment for playback using the monitor.
To DC IN 9V-12V
jack
WARNING:
Disconnect this car power adapter when
not in use. Not for use in 24V vehicles.
2
1. Connect the other equipment to the monitor using a standard AV Cable (not included).
2. Turn on the monitor.
3. Turn on the video equipment and follow the instructions provided with it to playback.
DVD player
right side
Monitor
right side
Car Power Adapter
Car Power Adapter
To 12V power outlet
4
5
6
7
To DC IN 9V-12V
jack
8
9
10
11
8) AUDIO & VIDEO OUT Jacks
9) DC IN 9V-12V Jack
10) STANDBY Indicator
When the STANDBY / ON switch is slide to ON position,
the light will be on.
11) Stand
•
Game System /
Video Equipment
AV cable
(not included)
To A/V IN jacks
E. Using the Monitor with Other Equipment while Playing DVD on the DVD Player
To 12V power outlet
•
•
Notes:
• Make sure to use the correct
Audio/Video cable. Connecting
the plugs incorrectly may cause
a weak signal.
• If you have a mono VCR, the
volume level from the speakers
will be low.
2
2
3
Monitor left side
Watching video equipment
Using the DVD Player or the Monitor Separately
•
•
You can connect a game console or other video equipment to the monitor while viewing a DVD on the DVD player.
To DC IN 9V-12V
jack
1
1
• Use this unit only with the included 12V car power adapter. Use with other car adapters could damage
the unit, or even your vehicle.
• The included 12V car power adapter is for use with this unit only. Do not use it with any other
equipment.
In the interest of traffic safety, drivers should not operate the unit or view videos while driving.
When the inside of the 12V power outlet is dirty with ashes or dust, the plug section may become hot due to poor
contact. Be sure to clean the 12V power outlet before use.
After use, disconnect the 12V car power adapter from both the unit and 12V power outlet.
If the unit is not properly attached to a vehicle, it may become airborne in the event of an accident and cause
damage, injury, or death.
Check your local traffic laws for rules governing the use of video devices in vehicles.
Connections
A. Watching a DVD on the DVD Player and
the Monitor
You can watch the same DVD on the DVD
player and the monitor.
DVD player
right side
Monitor left side
Game System /
Video Equipment
Monitor left side right side
DVD player
right side
AV cable
(not included)
To A/V OUT &
DC IN 9V-12V jacks
DC-AV cable
(included)
Watching a DVD on the DVD Player and
the Monitor
1. Connect the DVD player and the monitor
using the included DC-AV Cable.
2. Turn on the DVD player and the monitor.
3. Play a DVD on the DVD player; the monitor
will play the same DVD at the same time.
DC-AV cable
(included)
To A/V OUT &
DC IN 9V-12V
jacks
E-3
AV cable
(not included)
Watching a DVD on your TV
The DVD player can play two channels Dolby Digital.
Cautions:
1
If your T V has Audio/Video inputs, you can
connect the DVD player to your T V using a
standard A/V cable (not included).
C. Connecting a Stereo Receiver or Amplifier (for the DVD Player Only)
A. Using the Car Power Adapter
Remote Control
1) Button
Press the button and hold the front
panel to open the disc door.
SEARCH Button
2)
Performs fast reverse playback.
SEARCH Button
Performs fast forward playback.
PREV Button
Goes back to current or previous titles/
chapters/tracks.
NEXT Button
Advances titles/chapters/tracks.
STOP Button
Stops playing a disc.
PAUSE Button
Pauses playback of a disc. Each time
you press the PAUSE button the
picture advances one frame on a DVD.
PLAY button to resume
Press the
playback.
PLAY Button
Starts or resumes playback of a disc.
3) STANDBY / ON Switch
4) LCD Screen
5) Headphone Jack
6) VOLUME Control
Adjusts the volume.
7) Remote Sensor
Receives the remote control signal.
1) 2)
3)
4)
5)
6)
Power Supply
DVD Player
Dolby Digital
B. Connecting a TV (for the DVD Player Only)
Monitor
E-4
To A/V IN &
DC OUT 9V-12V
jacks
Connect to
Car Power
Adapter
DO NOT CONNECT
User Manual
Remote Control
DO NOT CONNECT
Important Safety Instructions
To A/V IN &
DC OUT 9V-12V
jacks
Watching Video Equipment on the Monitor while Viewing a DVD on the DVD Player
1. Connect the power connector between the DVD player and the monitor. Do not connect the Audio/Video portion
of the DC-AV cable.
2. Connect the monitor to the other equipment using a standard AV cable (not included).
3. Turn on the DVD player, the monitor and the other equipment.
4. Play a DVD on the DVD player.
5. Use the monitor for the other equipment.
Notes:
• Make sure to use the correct Audio/Video cable. Connecting the plugs incorrectly may cause a weak signal.
• If you have a mono VCR, the volume level from the speakers will be low.
E-5
F. Using Headphones/Earphones
Headphones / Earphones
[1/8” (3.5mm) diameter plug]
Turn down the volume before connecting the
headphones/earphones. Slowly raise the volume
with the headphones on until you reach your
desired volume. When headphones are connected,
the speaker is automatically disabled.
Playing a Disc
Warning:
Excessive sound pressure from earphones and
headphones can cause hearing loss. Avoid
listening to sound at excessive levels which could
be harmful to your ears.
Repeating a Single Track
DVD
1. While the CD disc is playing, press the REPEAT DISC button until the “
screen. The current track is played repeatedly.
Repeating a Whole Disc
” may appear on the screen during operation. A “
“
permitted by the unit or disc.
3. Press the REPEAT DISC button until the “
Playing a Disc
DVD player
right side
Monitor
left side
Installing in a Vehicle
1. Slide the STANDBY / ON switch on the top of the unit to the ON position. (Slide the ON/OFF switch on the
monitor to the ON position.)
See CUSTOMIZING THE FUNCTION SETTINGS before proceeding to step 2.
2. Press the button and hold the front panel to open the disc door.
3. Hold the disc by its edge and gently push it onto the spindle, with the label side facing the front, until you hear a “click”.
4. Push the disc door gently to close it. It takes a short while for your unit to load the disc. After loading, for most
DVDs, the unit will automatically take you main menu or start playing. If the unit does not automatically start
playing the DVD, press the  PLAY button.
Pausing Playback (Still Mode)
Mounting in the Vehicle
Use the supplied mounting straps to install the DVD player and monitor on the back of the vehicle's headrests.
Tightly wrap the mounting strap around the headrest.
Mounting the DVD Player
Press the PAUSE button. To resume normal playback, press the PLAY button.
Each time you press the PAUSE button, the picture advances one frame on a DVD.
Stopping Playback
Press the STOP button at the location where you want to interrupt playback. To resume playback at the position
where the disc was stopped, press the PLAY button.
If you press the STOP button twice, the unit’s memory will be cleared and pressing the PLAY button will reset
the disc to the beginning.
Fast Forward / Fast Reverse
1. Press the SEARCH
or
SEARCH button when a disc is playing. Each time you press the SEARCH
SEARCH button, the playback speed changes in the following sequence:
2. Press the
or
Angle selection
Locating a Desired Section
DVD
Locating a Specific Title
If a DVD contains title numbers, you can locate a specific title by directly selecting its title number.
1. Press the GOTO button.
2. Press the or button to highlight title number, press the corresponding
number buttons (2 digits) for the title you want. (For example: 02, 08, 10 or 15.) (If you press only 1 numeric
button, press the ENTER button to confirm.)
3. Playback starts from the selected title.
Notes:
• This function can only be used for discs on which scenes shot from multiple angles have been recorded.
• If only one angle is recorded, “ ” is displayed.
Display function
DVD Programmable Memory
DVD
While the disc is playing, press the DISPLAY button repeatedly to display information on operation status.
Unit Operation
1. Press the MEMORY button while a DVD is playing. The following display appears.
Clear: Delete all the input programs.
Exit: Exit memory menu and return to normal playback.
Start: Start memory playback.
Next / Prev: Move to the the next / previous setup page.
2. Input the title (2 digits) and chapter (2 digits) by pressing the number buttons. (For example: 01 02, 02 05, 02 11.)
It will move to the next item automatically.
• You can use the Cursor buttons ( , , , ) to move the highlighted bar to any item, and re-enter the title and
NEXT /
PREV to move to the the next / previous setup page.)
chapter. (Press the
• You can use the Cursor buttons ( , , , ) to move the highlighted bar to “Clear”, “Exit”, “Start” or “Next / Prev”,
and press the ENTER button to confirm.
” appears on the screen.)
3. Press the  PLAY button to start memory playback. (“
4. To resume normal playback from memory playback
• Press the MEMORY button to display the memory menu.
• Use the Cursor buttons ( , , , ) to move the highlighted bar to “Stop”. Press the ENTER button to confirm “Stop”.
” disappear from the screen.)
• Press the ENTER button to confirm “Exit”. It will return to normal playback. (“
Notes:
• If the title or chapter number entered is not permitted by the DVD, it will disappear. You should re-enter correct number.
• You should input items one by one following the 1, 2, 3 ... sequence.
• If the DVD contains only one title, you can only arrange order for chapters.
• Some discs may not permit memory playback operation.
• If you select repeat during memory playback, the DVD player repeats the current memory playback.
• If you press the MEMORY button while the display appears on the TV screen, the display disappears.
• The programmed selections will be cleared when you press the STOP button two times, open the disc tray or
turn off the DVD player.
Viewing JPG Files
Repeat Playback
DVD
You can play a specific title or chapter repeatedly. (Title repeat, chapter repeat, A-B repeat)
Repeating a Chapter
DVD
1. While the DVD is playing, press the REPEAT DISC button until the “
The current chapter is played repeatedly.
” indicator displays on the screen.
Repeating a Title
2. While the DVD is playing, press the REPEAT DISC button until the “
The current title is played repeatedly.
” indicator displays on the screen.
To Resume Normal Playback
3. While the DVD is playing, press the REPEAT DISC button until the “
E-7
” indicator displays on the screen.
DVD
You can combine your favorite titles/chapters and play them in the order you determine.
DVD
1. In STOP mode, press the SETUP button.
2. Press the button to select Language Menu.
3. Use the or button to select the option (Player Menu,
Audio, Subtitle or Disc Menu), then press the button.
4. Use the or button to select your preferred language,
then press the ENTER button to confirm.
5. Repeat steps 3 and 4 to adjust other options. Press the
button to return to the previous menu.
6. To exit the SETUP MENU and return to the normal screen,
press the RETURN or SETUP button.
SYMPTOM
CAUSE (AND REMEDY)
No power.
• Ensure the car power adapter is connected.
• Make sure that the unit is turned on.
The remote control • •
does not function.
•
•
•
Notes:
• Some DVDs may not play in the audio language selected. A prior language may be programmed on the disc.
• Some DVDs may be set to display subtitles in a language other than the one selected. A prior subtitle language
may be programmed on the disc.
• Some DVDs allow you to change subtitle selections via the disc menu only. If this is the case, press the MENU
button and choose the appropriate subtitle from the selection on the disc menu.
• Some DVDs may not included your pre-selected language. In this case, the DVD player automatically displays disc
menus consistent with the disc’s initial language setting.
This unit can play JPG files recorded on a CD-R or CD-ROM disc (CD-RW is not recommendable).
1. Open the disc door.
2. Hold a JPG file disc by its edge and gently push it onto the spindle
with the label side facing up until you hear a “click”.
3. Close the disc door. A list of folders/files will appear on the screen.
4. Press the or button to highlight a JPG file to play. Press the  
PLAY button to start playback. Press the STOP button to display a
folder list.
Notes:
•You can press the PAUSE button to freeze the picture. Press the
 PLAY button to resume picture slide show.
•You can press the STOP button to quit playback.
PREV or
NEXT button to change the picture.
•You can press the
•You can press the ANGLE button on the remote control to rotate direction of the picture by 90°.
• Some discs may not permit this operation.
E-8
1. In STOP mode, press the SETUP button.
2. Press the or button to select Video Menu.
3. Use the or button to select the option (Brightness or
Contrast), then press the button.
4. Use the or button to make adjustments, then press the
ENTER button. (The screen will change to your selected
setting).
5. Repeat steps 3 and 4 to adjust other options. Press the
button to return to the previous menu.
6. To exit the SETUP MENU and return to the normal screen,
press the RETURN or SETUP button.
Make sure the infrared remote sensor is not blocked.
Make sure the plastic sheet has been removed from the remote control.
Point the remote directly at the infrared remote sensor on the unit.
Replace the battery in the remote control with a new one.
Use remote control near the unit.
No sound or only a • The volume control is located on the side of the unit – please try adjusting this.
very low-level sound is • Make sure ON mode was selected.
PLAY button.
• Make sure the system is not paused. Press the
heard.
PLAY button.
• The unit is in fast-forward or fast-reverse mode. Press the
• Make sure the AUDIO/VIDEO output connections are correct.
• The DTS DVD cannot be decoded to have speaker output.
• The unit is too hot; shut off the unit for 30 minutes to cool it down.
No picture.
• The region number of the disc doesn't match the region number of this unit.
The picture is not
clear.
• The DVD is dirty. Gently clean the disc.
• The disc is scratched.
• Adjust the LCD's brightness and contrast using the VIDEO MODE button on the remote
control.
Severe hum or noise is
heard.
• The plugs and jacks are dirty. Wipe them with a cloth slightly moistened with alcohol.
• Clean the disc.
The disc does not play. •
•
•
•
•
SYSTEM SETUP
1. In STOP mode, press the SETUP button.
2. Press the or button to select System Menu.
3. Use the or button to select the option (TV Display or
Default), then press the button.
4. Use the or button to make adjustments, then press the
ENTER button. (The screen will change to your selected
setting).
5. Repeat steps 3 and 4 to adjust other options. Press the
button to return to the previous menu.
6. To exit the SETUP MENU and return to the normal screen,
press the RETURN or SETUP button.
Notes:
• If the time entered is not permitted by the DVD, “
” will display. You should re-enter correct time.
• Some discs may not respond to this process.
• Some scenes may not be located as precisely as you specified.
• This method for accessing specific locations is available only within the current title of the DVD.
DVD
Troubleshooting Guide
VIDEO SETUP
1. Press the GOTO button two times.
2. Press the corresponding number buttons (5 digits: X:XX:XX, for example: 0 30 05, 1
08 23, 1 22 56.) for the setting point you want.
3. Playback starts from the selected section.
Some DVDs contain scenes which have been shot from a number of different angles. For these discs, the same scene
can be viewed from each of these different angles.
1. While you are playing a DVD with different angles recorded,
press the ANGLE button to view the number of current angles
available.
2. Press the ANGLE button repeatedly to change the scene to the
next recorded angle.
• After approx. two seconds, playback will continue from the new
angle selected.
• If no button is pressed within 10 seconds, playback continues
without changing the current angle.
E-6
” indicator displays on the screen.
Notes:
• A-B repeat can only be used within the same title. If the start and end of the section to be repeated are in different
titles, A-B repeat is cancelled.
• The A-B repeat function does not operate in scenes where different camera angles are recorded.
You can move to a specific location by entering its corresponding time (hours, minutes, seconds).
Notes:
• If only one language is recorded, the language does not change.
• About two seconds later, playback continues with the new subtitle you selected.
• The number of languages recorded differs depending on the disc.
• If no button is pressed within a few seconds, playback continues without changing the current subtitle.
• This function can only be used for discs on which subtitles have been recorded in multiple languages.
• On some DVDs, subtitles are activated from the main menu of the DVD. Press the MENU button to activate the
main menu.
3. After use, slide the STANDBY / ON switch on the
DVD player to STANDBY (power off ). Slide the ON
/ OFF switch on the monitor to the OFF position.
4. While the disc is playing, press the REPEAT A-B button until the “
Locating a Specific Time
1. While a DVD is playing, press the SUBTITLE button to display the current language
setting, as shown in the example.
2. Press the SUBTITLE button repeatedly to select the desired subtitle language.
Turning on the Unit
1. Slide the STANDBY / ON switch on the DVD player
to the ON position. Slide the ON / OFF switch on the
monitor to the ON position.
2. The start-up picture will appear on the screens.
To Resume Normal Playback
Audio Selection
Subtitle selection
You can stand the DVD Player and monitor up on a
desk or table using the stand on the back.
You can play a specific section repeatedly.
1. While the disc is playing, press the REPEAT A-B button at the beginning of the section (“
” is displayed)
you want to play repeatedly.
2. Press the REPEAT A-B button again at the end of the section (“
” is displayed) you want to play repeatedly.
3. The unit will immediately begin replaying your selection.
1. Press the GOTO button.
2. Press the corresponding number buttons (2 digits) for the chapter you want. (For
example: 02, 08, 10 or 15.) (If you press only 1 numeric button, press the ENTER button to confirm.)
3. Playback starts from the selected chapter.
Notes:
• If only one audio format is recorded on the DVD, the number does not change.
• About two seconds later, playback continues in the new audio format.
Using the Stand for Desktop Use
” indicator displays on the screen.
DVD
• Press the
NEXT button to advance titles/chapters/tracks.
PREV button to go back to current or previous titles/chapters/tracks.
• Press the
• For Audio CDs, use the number buttons on the remote control to jump directly to the desired track.
1. While a disc is playing, press the AUDIO button to show the current
audio format number.
2. Press the AUDIO button repeatedly to select the desired audio format.
SAFETY WARNING!
• This unit should never be used by the vehicle's driver or left unsecured in the vehicle while driving.
• If this unit is being used in your vehicle, be sure that it is secured or held safely, and does not obstruct any safety
device, including air bags or seat belts.
• All passengers should wear seat belts when using this unit in a moving vehicle.
• If in doubt, please contact your vehicle manufacturer for further advice.
To Resume Normal Playback
If you know the chapter number for the chapter that you want to play, you can locate it by directly selecting that number.
On some DVDs, the sound is recorded in two or more formats.
Installation Guide
” indicator displays on the screen.
Locating a Specific Chapter
PLAY button when you reach the desired point to resume normal playback.
Skip (Forward / Reverse)
Mounting the Monitor
2. While the CD disc is playing, press the REPEAT DISC button until the “
The whole disc is played repeatedly.
Repeating a Specific Section
Customizing the Function Settings
LANGUAGE SETUP
This owner’s manual explains the basic instructions for operating this unit. Some DVDs are produced in
a manner that allows specific or limited operation during playback. Therefore, this unit may not respond
to all operating commands. THIS IS NOT A DEFECT. Please refer to the instructions accompanying the
specific DVD in question for more information about the options available on that DVD.
” means that the desired operation is not
” indicator displays on the
TV DISPLAY
Pan Scan
• When wide-screen video is played, this mode clips the right and left
sides of the image so that it can be viewed on a conventional screen.
• Some wide-screen DVDs that do not permit Pan Scan mode playback
are automatically played in letterbox mode (black bands that appear
at the top and bottom of the screen).
Letter Box
• When wide-screen video is played in this mode on a conventional
screen, black bands appear at the top and bottom of the screen.
Specifications and external appearance are subject to change without notice.
Limited Warranty
AVC MULTIMEDIA (“AVC”) makes the following limited warranty. This limited warranty extends to the original
consumer purchaser and is limited to non-commercial use of the product.
Cut off when a wide-screen
video image is played
Pan Scan
Wide screen
• This is the correct mode for playing wide-screen videos on the unit or
other external wide-screens.
Notes:
• The displayable picture size is preset on the DVD. Therefore the
playback picture of some DVDs may not conform to the picture size
you select.
• When you play DVDs recorded in the 4:3 aspect ratio, the playback
picture will always appears in the 4:3 aspect ratio regardless of the TV
DISPLAY setting.
There is no disc inside (“No Disc” appears on the screen).
Insert the disc correctly with the playback side facing down.
Clean the disc.
A non-NTSC disc has been inserted. The unit and disc region number are incompatible.
Condensation may have formed inside the unit due to a sudden change in temperature.
Wait about an hour for it to clear and try again.
One Year Parts & Labor Warranty
AVC products purchased in the United States are warranted to be free from defects in materials or workmanship for
a period of one year from the date of their original retail purchase. If the unit fails to conform to this warranty, we will
service the product using new or refurbished parts and products, at AVC’s sole discretion.
During a period of one year from the effective warranty date, AVC will provide, when needed, service labor to repair
a manufacturing defect at its designated Service Center. To obtain warranty service in the United States, you must
first call our Customer Support Center at 1-800-506-5746 or 1-877-252-6873, during the hours listed in the box
below. The determination of service will be made by AVC Customer Support. PLEASE DO NOT RETURN YOUR UNIT
TO AVC WITHOUT PRIOR AUTHORIZATION. New or remanufactured replacements for defective parts or products
will be used for repairs by AVC at its designated Service Center for one year from the effective warranty date. Such
replacement parts or products are warranted for an additional one year from the date of repair or replacement. The
Customer will be required to ship the unit to the Service Center indicated at the time Customer Support is contacted
to make the necessary repairs. The customer is responsible for all transportation charges to the service facility.
Packaging and Shipping Instruction
When you send the product to the AVC service facility you must use the original carton box and packing material or
an equivalent as designated by AVC.
LIMITED WARRANTY
Letter Box
Default
It takes 3-5 seconds to reset the unit to the factory default.
Wide Screen
Maintenance
Your Responsibility
(1) You must retain the original sale receipt to provide proof of purchase.
(2) These warranties are effective only if the product is purchased and operated in the U.S.A. or Canada.
(3) Warranties extend only to defects in material or workmanship, and do not extend to any product or parts which have
been lost or discarded, or damage to product or parts caused by misuse, accident, improper operation or maintenance,
or use in violation of instructions provided with the product, or to product which has been altered or modified without
authorization of AVC, or to products or parts thereof which have had the serial number removed or changed.
Out of Warranty
In the event your product requires repair after the limited warranty period has expired, please contact our
Customer Support Center at 1-800-506-5746, 1-877-252-6873 or www.RCAav.com
Hours: Monday–Thursday: 9am–7pm, Friday: 9am–5pm, Saturday: 9am–NOON Eastern time.
Important: You are responsible for any transportation, shipping or insurance relative to the return of product to
our Product Returns Center.
Cleaning the Disc
A defective or soiled disc inserted into the unit can cause sound to drop out during playback.
Handle the disc by holding its inner and outer edges.
• Do NOT touch the surface of the unlabeled side of the disc.
• Do NOT stick paper or tape on the surface.
• Do NOT expose the disc to direct sunlight or excessive heat.
• Clean the disc before playback. Wipe the disc from the center outward with a cleaning cloth.
• NEVER use solvents such as benzine or alcohol to clean the disc.
• Do NOT use irregular shaped discs (example: heart shaped, octagonal, etc.). They may cause malfunctions.
Cleaning the Unit
All warranties implied by state law, including the implied warranties of merchantability and fitness for a particular
purpose, are expressly limited to the duration of the limited warranties set forth above. With the exception of any
warranties implied by state law as hereby limited, the foregoing warranty is exclusive and in lieu of all other warranties,
guarantees, agreements and similar obligations of manufacturer or seller with respect to the repair or replacement of
any parts. In no event shall AVC be liable for consequential or incidental damages.
No person, agent, distributor, dealer or company is authorized to change, modify or extend the terms of these
warranties in any manner whatsoever. The time within action must be commenced to enforce any obligation of AVC
arising under the warranty or under any statute, or law of the United States or any state thereof, is hereby limited to
one year from the date of purchase. This limitation does not apply to implied warranties arising under state law.
• Be sure to turn the unit off and disconnect the car power adapter before maintaining the unit.
• Wipe the unit with a dry soft cloth. If the surfaces are extremely dirty, wipe clean with a cloth that has been
dipped in a weak soap-and-water solution and wrung out thoroughly, then wipe with a dry cloth.
• Never use alcohol, benzine, thinner, cleaning fluid or other chemicals. Do NOT use compressed air to remove dust.
This warranty gives you specific legal rights and you may also have other rights, which may vary, from state to state.
Some states do not allow limitation on how long an implied warranty lasts, when an action may be brought, or the
exclusion or limitation of incidental or consequential damages, so the above provisions may not apply to you.
Important Note
www.RCAav.com
• Before transporting the unit, remove any disc from the disc compartment.
For more information on other products and services, please visit our web site at
Important: Also keep your “Bill of Sale” as proof of purchase.
Model no.................................................................................................Product name.........................................................................................
Need More Help?
Please visit online help at http://www.RCAav.com
Type of set....................................................................................................................................................................................................................
Serial no...................................................................................................Invoice no.................................................................................................
Date purchased.....................................................................................Dealer name............................................................................................
FOR SERVICE AND REPAIR, PLEASE VISIT www.RCAav.com
E-9
Printed in China
811-797391W011
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement