For use with HC5342

Cylinder ONLY

INSTALLATION INSTRUCTIONS

Copy Par t# 297224, Rev. C, 01/2014 Page 1 of 1

ADAPTER KIT # HO5035A

Single, 1989 Mercury Outboard Engine

OUTBOARD TILLER

NOTICE

MOUNT SLIDE PLATE

ASSEMBLY USING

THIS HOLE

NOTICE

Tab washer corners MUST be bent up against the flats of the hex. head bolts to prevent the bolts from turning.

Figure A1.

3

1 2

Figure A.

ITEM PART # QUANTITY DESCRIPTION

PER KIT

1 741327

2 203123

3 752021

1

2

2

Adapter Plate

Tab Washer

Hex Head Bolt 5/16NF x 3-1/2", SS

1. Use the 3-1/2" long bolts to attach the adapter plate to the tiller arm.

2. Tab washer corners MUST be bent up against the flats of the hex. head bolts to prevent the bolts from turning. (See fig A1.)

WARNING

Failure to follow these instructions may result in the extension piece separating from the tiller, causing loss of steering and property damage and/or personal injury.

© 1999 Marine Canada Acquisition Inc. DBA SEASTAR SOLUTIONS 3831 No. 6 Road, Richmond, B.C. Canada V6V 1P6 Fax: 604.270.7172

Web: www.seastarsolutions.com