ICE1506 - Specification Sheet
SLIMLINE ICE1506 CUBE MAKER
Ice. Pure and Simple
•Space-saving 30" (762 mm) wide design to fit a broad
array of bins.
•Produces up to 1432 lbs (650 kg) of ice per day.
•Harvest Assist provides consistent ice production for the
life of the ice maker while reducing energy consumption
and increasing capacity.
•Pure Ice® exclusively by Ice-O-Matic. Built-in antimicrobial
protection for the life of the ice maker inhibits bacteria
growth on ice maker surfaces. Ice-O-Matic's optional
water filtration system provides protection against
unpleasant tastes, odors and scale formation.
•Durable, electroless nickel plating on all evaporator
plates ensures reliability.
•Longest warranty in the industry. Purchase an
Ice-O-Matic water filter with your cube ice maker,
replace the filter every six months, and the evaporator
warranty is extended to 7 years parts and labor
(available in the U.S. and Canada only).
•Constructed from corrosion-resistant stainless steel.
•Comes equipped with a Bin Thermostat kit and ice
deflectors for both bin and dispenser applications.
ICE1506HT ON A B55
ICE1506R
•ENERGY STAR® qualified.
ON A DISPENSER
Ice Maker Warranty
Every Ice-O-Matic ice maker is backed by a warranty
that provides both parts and labor coverage.
WATER FILTERS
Options & Accessories
Manifold
Ice Machine
Model
Inline
•Three years Parts and Labor.
System
Replacement
System
IFQ2
IOMQ (2)
N/A
•Five years Parts coverage on the evaporator
and compressor.
ICE1506
•Seven years Parts and Labor on the evaporator
when you purchase an Ice-O-Matic water filter with
your cube ice maker and replace the filter every six
months (available in the U.S. and Canada only).
Ice Form
Bin Chart
Kits for Combining Wider Bins with Smaller Models
ICE STORAGE BINS
CUBE
Model No.
FULL CUBE DIMENSIONS
7/8 x 7/8 x 7/8
22 x 22 x 22
HALF CUBE DIMENSIONS*
W x D x H (in.)
3/8 x 7/8 x 7/8
W x D x H (mm)
10 x 22 x 22
*Top Air model available
in Half Cube only.
Capacity
Width
Kits
W x D x H (in.)
W x D x H (mm)
ICE1506R
ICE1506HT
B25
B40
B42
B55
B100
242 lbs (110 kg)
30 in (762 mm)
344 lbs (156 kg)
30 in (762 mm)
351 lbs (160 kg)
22in (559 mm)
510 lbs (232 kg)
30 in (762 mm)
854 lbs (388 kg)
48 in (1219 mm)
Kit Not
Required
Kit Not
Required
N/A
Kit Not
Required
KBT5
B700
680 lbs (308 kg)
30 in (762mm)
B1000
1000 lbs (454 kg)
48 in (1219 mm)
B1300
1320 lbs (599 kg)
48 in (1219 mm)
B1325
1325 lbs (601 kg)
60 in (1524 mm)
B1600
1660 lbs (753 kg)
60 in (1524 mm)
Kit Not Required
See Ice-O-Matic Price List for Adapter Kits to combine ice makers with most available ice/beverage dispensers.
ICE1506 SLIMLINE CUBE ICE MAKER
Features
SLIMLINE ICE1506 CUBE MAKER
Ice. Pure and Simple
Remote Cooled
ICE1506T
ICE1506R
Side View
Top View
4.5" (114 mm)
F.
34.39
Air Cooled
F.
D.
19.5" (495.3 mm)
E.
D.
Please note: air-cooled units require 6" (152 mm)
clearance for air intake and exhaust.
3.3" (84 mm)
25.73
A.Ice maker potable water in, 3⁄8" FPT.
B.Ice maker water out, 3⁄4" FPT.
C.Hole for electrical connections, 7⁄8".
11.66" (257 mm)
16.14" (332 mm)
26.29
2.06" (51 mm)
1.1" (28 mm)
E.
22.13" (561 mm)
30.40
C.
Optional Top Discharge – Side Clearance Required
22.03" (560 mm)
19.69" (500 mm)
17.94" (456 mm)
15.72" (399 mm)
ICE1506 SLIMLINE CUBE ICE MAKER
A.Ice maker potable water in, 3⁄8" FPT.
B.Ice maker water out, 3⁄4" FPT.
C.Hole for electrical connections, 7⁄8".
D.Liquid line, 3⁄8" male quick connect
coupling for precharged line set.
E.Discharge line, 1⁄2" male quick connect
coupling for precharged line set.
F. Ice cube drop zone in bottom of unit.
C.
A.
Air In–
Rear
and
Sides
B.
2.22" (56 mm)
5.12" (130 mm)
Ice maker
mounting holes
(underside)
20" (508 mm)
A.
19.15" (487 mm)
B.
Air
In-Rear
and Sides
4.09" (104 mm)
24
Back View
10.34
5.12
Ice maker
mounting holes
(underside)
20.00
30.20
Front View
Back View
Dimensions
Operating Requirements
ICE1506R
MAXIMUM
MINIMUM
60 Hz
Ambient Temp. Range Air
50˚F (10˚C)
Water Temp.
40˚F (4.4˚C)
Water Pressure
20 PSIG (1.4 BAR)
W x D x H (in.)
30.4 x 26.3 x 22.03
W x D x H (mm)
772 x 668 x 560
ICE1506HT
100˚F (38˚C)
60 PSIG (4.1 BAR)
W x D x H (in.)
30.4 x 26.3 x 34.39
W x D x H (mm)
772 x 737 x 874
Specifications
Water Usage
gallons per 100 lbs of Ice
90°F air/70°F water
Ice Production
per 24hrs
Potable
Condenser
Voltage
Characteristics
Min.
Circuit
Ampacity
Fuse
Size
Approx.
BTUs
per hour
Model Number
Cond. Unit
ICE1506HR
Remote*
1432 (650)
1216 (553)
20
-
4.67
208-230/60/1
24.5
30
22,491
ICE1506HT
Air
1430 (649)
1100 (499)
20
-
4.68
208-230/60/1
23.0
30
20,000
NOTES:
Number of Wires:
Approx. Shipping Weight lbs (kg):
Refrigerant Type:
90°F air/
70°F water
lbs (kg)
kWH Used
per 100 lbs of
ice @ 90°F air/
70°F water
70°F air/
50°F water
lbs (kg)
*Requires Remote VRC 2661 Condenser.
3 (including ground)
ICE1506HR 300 (136) • ICE1506HT 310 (141)
R404A
ENERGY STAR qualified machine. Please see our website www.iceomatic.com for the latest list of ENERGY STAR qualified machines and available rebates
Daily ice production based on half cube configuration. Ice-O-Matic reserves the right to change the specifications at any time without obligation. Certifications may vary depending on country of origin.
11100 E. 45th Avenue • Denver, CO 80239 • Phone: 1. 866. PURE. ICE • Fax: 303. 371. 6296 • www.iceomatic.com
Rev:5/15
Part:1019
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement