Section 6 - Camera Support
PHOTO - VIDEO - PRO AUDIO
Section6
CAMERA SUPPORT
Acratech....................................................406
Benbo ........................................................407
Cullman ............................................408-409
Giottos ...............................................410-411
Gitzo ...................................................412-419
Manfrotto ........................................420-437
Slik .....................................................438-447
Sunpak .............................................448-449
Tiltall ..........................................................450
Velbon ..............................................451-455
Wimberly .........................................456-457
Obtaining information and ordering from B&H is quick and
easy. When you call us, just punch in the corresponding
Quick Dial number anytime during our welcome message.
The Quick Dial code then directs you to the specific
professional sales associates in our order department.
For Section 6, Tripods
use Quick Dial #: 73
406
C AM E R A S U P P O R T
ACR ATECH
ULTIMATE BALLHEADS
The Acratech Ultimate Ballhead is the most efficient design ever created for combining low
mass with incredible stopping power. Available with or without an installed Arca-type quick
release clamp, it is an ideal head for those that don’t need the progressive tension control of
the heavier (and more expensive) Arca-Swiss B1. It can be combined with a Wimberley
Sidekick to give exceptional gimbal-type control of all but the most gargantuan 35mm and
medium format super telephoto lenses.
The Ultimate Ball Head will hold more weight more securely than ball heads many times
it’s size. It is designed to hold digital, 35mm, medium format and smaller large format
cameras securely in any position, and has been tested to hold 25 lbs. in any position. Tripod
connection thread is 3/8˝-16, and includes a reducer bushing so it will also fit 1/4˝-20
threads and all standard camera tripods.
All components are precision C.N.C. (computer-numerically controlled) machined from
solid stock and all structural components are machined from aircraft 6061-T6 aluminum. All threaded fasteners are machined
from stainless steel and all bearing surfaces are machined from a special copolymer similar to Teflon.
FEATURES
◆ Solid precision feel, absolutely no
migration after tightening the clamp
◆ Silky-smooth black andonized finish for
precise positioning
◆ Fully captive controls will not come off
◆ Open design facilitates quick maintenance
◆ “Dry” ball does not attract dirt or dust
◆ Full movements allow any camera position
2128 Arca-Type Quick Release Clamp (ACQRPCT14): 1/4-20˝ generic with cork top.....39.95
2129 Arca-Type Quick Release Plate
(ACQRPCT38): With 3/8˝-16 generic with cork
top ..........................................................39.95
2130 Arca-Type Quick Release Plate
(ACQRLP2.5): 2-1/2˝ (63mm) lens plate..39.95
2131 Arca-Type Quick Release Plate
(ACQRLP4): 4˝ (101mm) lens plate.........44.95
V2 Ballhead #1118 with Arca-Style Quick
Release (ACV2BH): All rubber knobs with
detent pin on quick release clamp ........329.95
New! GV2 Ballhead:
Has a gimbal feature for telephoto lenses up
to 400mm. All rubber knobs with detent pin
on quick release clamp...............................Call
PHOTO - VIDEO - PRO AUDIO
◆ Weighs less than 1 lb. with quick release
1142 Arca-Type Quick Release Clamp (ACQRCKRDTP): With 3/8˝-16 threaded hole.....99.95
Leveling Base #1117 (ACLB):
Levels the bottom of your ballhead for
panoramic photography. 3/8˝tripod thread,
supports 25 lbs.......................................149.95
Ultimate Ballhead #1130 with Quick Release
Rubber main control knob
on the right side.....................................289.95
and 3/8˝-16 threads)
CLAMPS & PLATES
Ultimate Ballhead 1116 (ACUBHKRL):
No clamp, rubber main and pan knob .239.95
(ACUBHQRKRQ):
◆ Fits all standard tripods (1/4˝-20
clamp, easily holds over 25 lbs. at any angle.
Ultimate Ballhead 1112 (ACUBHKML):
With Left Metal Knobs & 3/8˝-16 Screw, no
quick release ..........................................219.95
Ultimate Ballhead 1115 (ACUBHQRKRLDP):
Left controls all rubber knobs, detent pin on
clamp......................................................299.95
many other QR plates
◆ Calibrated panning bed
from prolonged vibrations
◆ Compatible with Kirk, Arca, R.R.S., and
2138 Arca-Type Quick Release Plate
(ACQRPCE7): Canon 10D (without grip);
Nikon D100 & D200 (without grip).....39.95
2143 Arca-Type Quick Release Plate (ACQRPH38): For Hasselblad.................................39.95
2158 Arca-Type Quick Release Plate (ACQRPND2H): For Nikon D2H, D2x....................39.95
2159 Arca-Type Quick Release Plate (ACQRPCDR): For Canon EOS-30D, Digital Rebel,
Digital Rebel XT/XTi .........................................................................................................39.95
www.bhphotovideo.com
C AM E R A S U P P O R T
407
BENBO
TRIPODS
Stability linked to versatility and weight are the prime considerations
when choosing a tripod. For over 35 years Benbo tripods have offered
photographers a unique combination of these factors.
The tubular aluminium construction of the legs offers the best possible
combination of weight and rigidity. Each leg can be independently
positioned, made possible by the tripods unique, highly flexible main
joint, which enables each leg to swing through a complete 360°.
The center column can also be swung through 360°, producing a
combination that allows the camera to be positioned at almost any
point. Whether used in the standard configuration with a vertical
center column, down at ground level with legs splayed out, or with
one of the legs pointing upward finding support from a tree or wall,
Benbo tripods can always be relied upon to give complete stability.
All models are constructed from drawn tubing with no internal seams,
with the lower tubing having sealed feet, allowing the
tripod to be stood in water, mud or snow up to the leg joint.
Benbo #1
Benbo
Trekker MK 2
Benbo #2
Classic No 1 & 2 Tripods
These heavy-duty tripods offer great stability and are capable of
supporting the heaviest of camera equipment. They are both
constructed from the same tough aluminium tubing, with the No 2
tripod offering extra height with its longer legs. The double ended center
column offers a choice of standard 3/8˝ or 1/4˝ fixing for ball & socket heads.
Trekker Mk 2
Benbo’s most versatile tripod, the swivel joint at the top of the center column
can be fully adjusted through 180° offering even more flexibility when positioning the camera. This feature makes the Trekker MK2 ideal when subjects
need to be photographed from above or at a low angle. The Trekker MK2
supports the majority of today’s digital SLR cameras. However stability is directly related to weight and the provision of a hook at the lower end of the
center column, allows the temporary addition of extra weight (e.g. a camera
bag) to give greater stability when long lenses are in use on the camera.
Mini Trekker
Benbo
Mini Trekker
All the features of the Trekker Mk2 but with shorter fixed length legs. This
lightweight compact tripod is ideal for use when photographing flowers and
other low-level nature subjects, or indoors as a tabletop tripod.
BENBO TRIPOD SPECIFICATIONS
SKU
Extends to
Closes To
Weight
Price
Benbo 1
BEB1Z
62˝
33˝
7.5 lbs
188.95
Benbo 2
BEB2Z
101˝
45˝
8.27 lbs
199.95
Benbo Trekker Mk 2
BET
61˝
33˝
4.5 lbs
124.95
Benbo Mini Trekker
BEMT
28˝
21.5˝
3.4 lbs
79.95
Benbo 1 Kit (BEBSK): Includes Professional
Ballhead and carry bag .........................314.95
Benbo 2 Kit (BEBSKQ): Includes Professional
Ballhead and carry bag .........................356.95
Benbo Trekker Kit (BETK): Includes
Professional Ballhead and carry bag ....189.95
(212) 444-5027 • 1-800-947-9927 • Quick Dial 73
PHOTO - VIDEO - PRO AUDIO
408
C AM E R A S U P P O R T
CULLMAN
MAGIC SERIES
Magic II Tripod
Known as the most compact, full height tripod available today, the Magic II is the
tripod which photographers and enthusiasts alike can take with them wherever they
go, due to it’s compact size. When folded flat, the magic measures a mere 133⁄4˝ high
and 1.5˝ thick, and can fit into the bottom pocket of many camera bags. Assembled
in no time at all, it provides remarkable stability, even
when fully extended. The Magic II can also be converted into a full height monopod. Simply unscrew one
of the legs and join it up to the removable center column. The unique one-twist mechanism allows the tripod legs to lock at one quick turn of the topmost leg
portion. The entire tripod is anodized in a cobalt
matte finish for reflection free photos. The Magic II comes equipped with a removable ballhead, Quick Release and plate, and weighs only 2.5 lbs.
CUM2
12995
$
Mini Magic
Chestpod Magic
Clamp Magic
A smaller
sized Magic
tripod with
the same
unique “fold
flat” design
as Magic II.
It includes a
sliding, reversible center column with a ballhead. A small
81⁄2˝ length when closed, the Mini
Magic extends to over 21˝,
yet weighs just 1.5 lbs. It’s folded dimensions are 8.5 x 6 x 1.5˝.
Mini Magic (CUMM)......................72.95
The special tripod for steady camera
control after a long day. To prevent
the arms getting tired, the weight of
the camera is transferred to the body.
When not actually shooting both
your hands are free. Features a sliding
column, quick coupling system and
a quick release ball head.
Chestpod Magic (CUCM) ............69.95
For situations
in which, for
some reason or
other, a tripod
can not be
used. The
clamp provides
perfect camera
support on
round, angular
or irregularly shaped objects. Clamp
Magic features a sliding column and
includes a ball head with a 1/4-20˝
standard screw. It has a load capacity
of 5.5 lbs.
Clamp Magic (CUCMQ) ....................76.95
MAGIC SERIES SPECIFICATIONS
Magic 2
Mini Magic
Chestpod Magic
7.7 lbs.
6.6 lbs.
6.6 lbs.
Minimum Usable Height
13˝
13˝
13˝
Maximum Extension
57˝
21˝
15.5˝
Leg Sections
4
1
2
Center Column Sections
2
1
1
2.5 lbs.
1.5 lbs.
1 lb.
Load Capacity
Weight
PHOTO - VIDEO - PRO AUDIO
www.bhphotovideo.com
Since 1955, Cullmann has been manufacturing
professional tripods and accessories. The tripods can
be extended with the many variable system accessories.
Cullmann tripods are noted for their outstanding
stability and ease of handling. The “quick release”
system that allows you to put on and take off your
photo equipment from your tripod was invented by
Mr. Cullmann, and is now a universal system of
camera mounting. Many other innovations, such as
built-in carrying handles, hexagonal shaped legs, top
lock adjustment levers, and center columns all add up
to the most extensive line of advanced amateur and
professional tripods and accessories available today.
C AM E R A S U P P O R T
409
CULLMAN
TRIPODS
Mini and Specialty Tripods
Cullmann Specialty Tripods have been designed to provide photographers with the answers to a variety of cameramounting problems, especially where size, space, and surface texture might be a consideration.
CU-50001 Piccolo (CUP)
Smaller than a pack of cigarettes, the
Piccolo has a 3-way adjustable head
and 5 section legs........................18.95
CU-3090 TravelPod (CUTP)
Combined shoulder/table top tripod
with unique folding shoulder stabilizer. 2 way video head with quick release coupling. Great for cameras,
camcorders, and binocular.........54.95
CU-3080 MultiPod (CUMP)
Multi-faceted mounting system, great
for still or video filming in auto, ship,
train, or even small plane. Sure-grip
rubber feet and suction cup mounting
for smooth surfaces....................59.95
TOURING SET
Touring Kit
(CUTS) .........139.95
The perfect outdoor tripod, the Touring Set provides any amount of combinations for
getting the shot where most other tripods don’t even come close. This 5 piece kit is perfect for all still and video applications, when shooting on any ground, from any angle,
from any position. Extremely quick to set up, each accessory included in the set can be
used either by itself, or in conjunction with any of the other accessories. The Touring
Set is a “must have” for any nature or outdoor photographer.
Mini-Tripod (CUC)
The heart of the set, this sturdy 3 section tripod has a removable
center column which can be reversed for shooting close-ups. A removable ball head is mounted on top of the tripod ....................54.95
Woodscrew (CUWS)
Can be screwed into beams, fence posts, park benches, and tree
stumps (never screw into live trees) .............................................16.95
Universal Clamp (CUCU)
The Universal Clamp ensures secure mounting to round, square, or
irregularly shaped objects, such as tree limbs or fence post ........39.95
Mini-Tripod
Woodscrew
Suction Mount
Ground Spike (CUGS)
For pushing into any ground like sand, earth, snow, pebbles, etc.
Can also be used with the ball head, for positioning of your camera
or camcorder..................................................................................16.95
Suction Mount (CUSM)
Gives a safe and sure grip on any smooth surface such as glass,
marble, metal, or plastic, or car windows. The ball head handles a
load of 6 lbs...................................................................................34.95
Universal Clamp
Ground Spike
(212) 444-5027 • 1-800-947-9927 • Quick Dial 73
PHOTO - VIDEO - PRO AUDIO
410
C AM E R A S U P P O R T
GIOT TO S
MINI TRIPODS
U.Pod
Constructed of an
aluminum alloy,
protected by a wearproof black laquer,
they are available with
built-in pan or ball
head. The legs fold into
the central column for
storage or use as a
mini-monopod (pistol
grip). Unfolded the
legs become a platform turning the U.Pod
into a stable mini tripod supporting up to 7
lbs. The QU100 and QU 200 fold to 9.65˝
and extend to 14.4˝. The QU 400 folds to
11.6˝ and extends to 18.5˝. A wrist strap is
built-in for added convenience.
QU100 with Pan Head (GICTTPH) ..........34.95
QU200 with Ball Head (GICTTBH ...........32.95
QU 400 with Ball Head and Quick Release
(GICTTBH ...................................................45.95
Q.Pod & Ball.Pod
Unbelievably small yet extraordinarily
strong pocket tripods for cameras, telescopes, binoculars and camcorders.
Although they are the smallest tripods
in the world, the Q.Pods (tilt head)
and Ball.Pods (ball head) are multifunctional, strong and the best choice
when traveling. Titanium finish with
rubber tipped legs they stand steady on
any surface and are suitable for any occasion. Available in a two or five-section leg design, each
has a minimum height of 3˝, extended height of 4.25˝, weighs 3.7 oz. and includes a case.
Compact Q.Pod (GICQPT)
• 2-section rubber tipped legs
• Tilt head with 1/4-20 thread and video pin
• Folds flat (folded size 5 x 1.5 x 0.9˝) .....16.95
Compact Ball.Pod (GICBPT)
• 2-section rubber tipped legs
• Ball head with 1/4-20 thread and video pin
• Folds flat (folded size 5 x 1.5 x 0.9˝) .....14.95
Mini Q.Pod (GIMQPT)
• 5-section rubber tipped legs
• Tilt head with 1/4-20 thread and video pin
• Folds flat (folded size 3.5 x 1.5 x 0.9˝) ...21.95
Mini Ball.Pod (GIMBPT)
• 5-section rubber tipped legs
• Ball head with 1/4-20 thread and video pin
• Folds flat (folded size 3.5 x 1.5 x 0.9˝) ...18.95
VT-800 Series
P.Pod
The VT-800 Series delivers exceptionally smooth geared center column
movement with a crank and easy-locking knob. The 3-way pan head lets
you mount and remove the camera by simply pushing the quick release
lever. They also offer a bubble level, easy-to-lock and release leg locks,
built-in handle, and a hook that lets you hang weight for greater stability.
Made of solid aluminum alloy,
the monopod feels solid and
sturdy. Its surfaces are carefully
polished twice to give its leg sections smooth and firm
locking and quick unlocking action. Finally, it is anodized, preserving the distinctive look of
aluminum and pure black finish.
Now take it into the field.
It’s three accessory feet can be
deployed at the foot of the
monpod, turning it into a tripod. Plus, it’s height is adjustable from 23.6˝ to 72.6˝.
Alternatively, the accessory feet can be
fixed to its collar to turn the monopod
into a low height tripod. Finally, fixing
two of the feet around the neck of the
monopod gives you a low angle tripod
ideal for macro and nature photography.
Integral quick release pan head allows
the camera to be instantly attached and
detached. The 2-way tilt head allows
180° of movement.
P.Pod (GIPP) ......................................84.95
PHOTO - VIDEO - PRO AUDIO
VT-806 (GIVT806): With an air cushioned geared column, the VT-806 has a
60˝ maximum height, a 24˝ closed length, and weighs 2.4 lbs.............38.95
VT-808 (GIVT808): Maximum
height 60˝, closed length 24˝, it
weighs 2.9 lbs.........................42.95
VT-809 (GIVT809): Maximum
height 65˝, closed length 27˝, it
weighs 3.9 lbs.........................62.95
MONOPODS
Monopods are specially designed for photographers on the move, shooting fashion or sports.
Monopods support heavy cameras, let you make instant changes to angle, and position in
restricted spaces to capture the perfect shot. Available in 3-, 4- 5- and 6-section models,
in aluminum or carbon fiber, all Giotto’s monopods feature foam-padded grip, rubbercovered leg locks, 3/8˝ and 1/4˝ camera screw, and a rubber ball foot that accepts
accessory spikes or shoes. The rubber foot gives them firm ground support and
flexibility of up to 360° of tilt. Carbon fiber models also feature a spring-loaded
foot pedal for added support, and all monopods are equipped with an adjustable
wrist strap, case and toolkit.
Aluminum Monopods
Model
Load Capacity
Extended Length
Leg Sections
Weight
Item Code
Price
www.bhphotovideo.com
MM-9160
33 lbs.
62˝
5
1.3 lbs.
GIMP5
54.95
MM-9170
33 lbs.
66.5˝
4
1.7 lbs.
GIMP466
56.95
MM-9180
33 lbs.
70.5˝
5
1.6 lbs.
GIMP570
62.95
Carbon Fiber Monopods
MM-8950
33 lbs.
59˝
3
1.3 lbs.
GIMPCF359
114.95
MM-8970
33 lbs.
70˝
3
1.3 lbs.
GIMPCF370
139.00
MM-8990
33 lbs.
75˝
4
1.3 lbs.
GIMPCF4
139.00
C AM E R A S U P P O R T
411
GIOT TO S
BALL HEADS
MH-1004
MH-7001
(GIMH1004)
The smallest ball head with single knob for
the ball and the pan. Weighs 4.8 oz., 2.4˝
height, capacity 5 lbs. Top plate with 1/4˝
camera thread. Base with 3/8˝ tripod socket
with 1/4˝ reducing bushing.......................9.95
MH-1003
(GIMH1003)
Small ball head with single knob for the ball
and the pan. Weighs 5.3 oz., 2.8˝ height, 8.8
lb capacity. Top plate with 1/4˝ camera
thread. Base with 3/8˝ tripod socket with
1/4˝ reducing bushing .............................39.00
MH-1003
MH-1000
(GIMH1000)
MH-1000
Large ball head with calibrated tension
and lock knobs and pan lock. Weight
20.6 oz., 4.5˝ height, 22 lb. capacity.
Top plate with 1/4 and 3/8˝ camera
threads. Base with 3/8˝ tripod socket with
1/4˝ reducing bushing. Includes draw
string pouch ......................................109.00
MH-2000
(GIMH2000)
Large ball head with dual ball design. Calibrated tension and lock knobs.
Weighs 23.5 oz., 5.4˝ height, 26.5 lb. capacity. Top with 1/4 and 3/8˝ camera
threads. Base with 3/8˝ tripod socket with
1/4˝ reducing bushing. Includes draw
string pouch ......................................149.95
MH-1002
MH-3000
MH-2000
(GIMH3000)
MH-3000
The largest Giottos ball head. Calibrated
tension pan and lock knobs. Weighs 42 oz.,
5.4˝ height, 33 lb. capacity. Top with 1/4 &
3/8˝ camera threads. Base with 3/8˝ tripod
socket with 1/4˝ reducing bushing. Includes draw string pouch..................119.95
MH-1001
MH-1002
(GIMH1002)
Compact ball head with ball lock knobs and
pan lock. Weighs 8.4 oz., 3˝ height, 13 lb capacity. Top plate with 1/4˝ camera thread.
Base with 3/8˝ tripod socket & 1/4˝ reducing
bushing. Includes draw string pouch .....59.00
MH-1001
(GIM7001)
Ball head with built-in quick release supports 13 lbs. Camera
plate slide to aid in macro camera positioning. QR has two bubble levels and is equipped with 1/4 and 3/8˝ camera screws.
Weighs 21 oz. and is 4.3˝ high. Base with 3/8˝ tripod socket
with 1/4˝ reducing bushing. Includes draw string pouch....54.95
(GIMH1001)
3-Way Pan Heads
3-way pan head with lever lock, 1/4˝ thread,
bubble level, padded handles, 3/8˝ tripod
socket with reducing bushing. Weighs 1.3
lbs., supports 18 lbs. Includes pouch case.
(GIPH) ....................................................54.95
MH-5000
Medium ball head with calibrated tension
and lock knobs and pan lock. Weighs 13 oz.,
4˝ height, 17.6 lb. capacity. Top plate with 1/4
and 3/8˝ camera threads. Base with 3/8˝ tripod socket with 1/4˝ reducing bushing. Includes draw string pouch ........................89.00
3-way pan head with double locking quick
release and 1/4˝ thread, two bubble levels,
padded handles, 3/8˝ tripod socket with
bushing. Weighs 1.5 lbs., supports 18 lbs. Includes pouch case. (GIPHQR) ................60.95
MH-5001
Quick Release Adapters with Plate
For MH-1000, MH-1001, MH-2000,
MH-3000, and M-7001 Ball Heads.
MH 200 (GIMH200): With 1/4˝ and 3/8˝thread.
Camera plate release via screw .................34.95
MH 621 (GIM621): With 1/4˝ and 3/8˝ thread.
Plate slides for macro positioning ............28.95
MH 100 (GIMH100): With 1/4˝ thread.
Camera plate release via lever ......24.95
MH 500 (GIMH500): With 1/4˝ and 3/8˝ thread.
Camera plate release via screw .................42.95
MH 652 (GIMH652): With 1/4˝ and 3/8˝ thread.
Fits most ballheads....................................24.95
(212) 444-5027 • 1-800-947-9927 • Quick Dial 73
PHOTO - VIDEO - PRO AUDIO
412
C AM E R A S U P P O R T
GITZO
TRAVELER SERIES
Sport Carbon Performance Tripods
With such a good ratio of compact folded length to extended open height, the Traveler
is the ideal tripod to carry with you around the world. Gitzo’s unique patented 180°
folding mechanism accommodates the head inside the folded tripod legs and makes
this the smallest folded tripod for its open size and number of sections. Matching this
compactness with the sturdiness of lightweight carbon fiber and good speed in setup
makes the Travelers the ultimate tripods.
Two models are available, 5-section GT1550T with removable ball head (G1077M) and
4-section GT1540T (without head). Traveler tripods feature an upper disc in a safe lock
material that cuts vibrations and improves the grip between tripod and head. The upper
disc can also be fixed directly to the tripod top casting, thus eliminating the center column. This is called “Ground Level Set” and allows for low shooting positions and further
weight savings. Tripods come with a convenient anti-dust bag for storage and packing.
GT1540T
FEATURES
◆ Made of
Carbon 2, a six-layer tube
construction process that makes it stronger
then existing carbon, yet 15% lighter. Also
provides greater capacity to absorb
vibrations and withstand fatigue.
◆ The Traveler is the most compact carbon
fiber tripod in the world. When opened, it
is as tall as a standard Gitzo tripod, but
thanks to its 180° folding mechanism, it is
25% shorter than standard when folded.
◆ With the Anti-Leg-Rotation (ALR) system,
you just loosen all twist locks at the same
time and pull down the leg before tightening
the twist locks. setups up in just 15 seconds.
◆ The center column locking collar above the
tripod shoulder makes it easier to adjust the
column quickly. The Traveler also is built
with Gitzo’s anti-rotation grooved center
column for improved stability.
◆ The rapid column can easily be inverted for
low level shooting and macro work.
◆ Built-in accessory hook allows you to hang
a stabilizing weight (e.g. a full camera bag
or a sand/water bag) from the bottom of
the tripod center column. Useful with long
heavy lenses, uneven ground or in windy
conditions. The hook can hold up to 40 lb.
Ground Level Set
For low angle shooting, the center column can be removed and the upper disc fitted directly to the
tripod top casting. The disc is locked into position using the retractable column hook. The
ground level configuration can be achieved in a few seconds without tools or extra components,
and only the column need be removed. With this effective and simple built-in solution, Gitzo has
dramatically increased the ways you can use the tripod.
Lightweight and compact
4- and 5-section tripods
designed to fit into your hand
luggage. An excellent choice
for compact digital cameras
and digial SLRs, or even for
lightweight camcorders.
When used with an SLR or
DSLR, the Traveler is ideal
for a range of lenses up to
200mm. Offers an excellent
maximum load capacity with
good torsional rigidity at a
very low weight.
The GT1550T (only)
includes removable G1077M
Magnesium center ball head,
so no additional expense for
a head is necessary. When
closed, the head is protected
under folded legs.
Column
Type
Leg
Sections
GT1540T (GIGT1540T)
Rapid
4
55.1˝
GT1550T (GIGT1550T)
Rapid
5
57.5˝
PHOTO - VIDEO - PRO AUDIO
Max. Height with
Max. Height
Extended Center Column Column Down
www.bhphotovideo.com
Minimum
Height
Closed
Height
Weight
Max. Load
Capacity
Price
46.9˝
14.2˝
14.2˝
2.2 lbs
4.4 lbs
559.95
49.6˝
14.2˝
16.1˝
2.2 lbs
9.9 lbs
639.95
C AM E R A S U P P O R T
413
GITZO
LEVELING TRIPODS
Gitzo’s revolutionary Leveling tripods are desgned for photographers who need fast set
up and leveling accuracy. Inside the tripod’s upper casting is a special free-rotating
ball, similar to those normally used in Gitzo’s ball heads. The center column passes
through this ball and can both be moved up and down, and be inclined in any
direction at any angle up to 15°. The inclination and vertical movements are
completely independent. This patented system is extremely useful for panoramic,
outdoor and wildlife photographers or for birdwatching because the Leveling system
allows the camera or scope to be set perfectly horizontal easily and quickly when
working on uneven ground.
Leveling tripods are available in two heights: eye level and standard, and in two
materials: Carbon 6X and Basalt. They benefit from many new Gitzo features that
improve performance, versatility and quality. G-Lock leg locking system increases
system rigidity by 20% and allows quicker and stronger leg locking. Lightweight high
quality technopolymer upper disc to the Basalt model, while the Carbon 6X tripods
feature a solid machined aluminium upper disc with a new Safe Lock material that cuts
vibration and improves grip between tripod and head. All Leveling tripods also feature
new ground level set: the center column is removable and the upper disc can be fitted directly to the upper casting. With only a
few seconds of set up, this clever built-in solution dramatically increases the tripods’ flexibility allowing for ultra low shooting
angles, weight reduction and increased stability. All come with a convenient anti dust bag for storage and packing.
FEATURES
How to Level the Tripod
◆ Made of
machined aluminum, the upper disc
features Gitzo’s new Safe Lock material. The
disc can be mounted directly to the tripod
top casting (Ground Level Set feature). The
1/4-3/8˝ reversible screw has been redesigned
for more reliable functionality.
Open the tripod, leaving
the center column down.
Loosen the leveling
system locking knob.
Adjust the center column
inclination to get it level
- for reference use the
built-in spirit level.
When the column is
correctly leveled, tighten the locking knob,
slide the center column to the required height.
◆ Gitzo’s G-Lock leg locking system has been
◆ Ideal support for fluid heads, the Leveling
◆ Only takes seconds to open and secure the
tripod sets the camera perfectly horizontal
while the fluid head allows pan and tilt
movements. Recommended for lenses up to
300mm.
completely redesigned, and achieves a 20%
increase in rigidity, faster operation and
stronger, safer locking. G-Lock’s special design also provides a “gravity lock” effect: the
higher the load applied vertically to the leg,
the stronger the lock.
tripod with the Anti-Leg-Rotation system.
Just loosen all twist locks at the same time
and pull down the leg before tightening the
twist locks, making setup just 15 seconds.
Column
Type
Leg
Sections
Max. Height with
Max. Height
Extended Center Column Column Down
GT2530LVL (GIGT2530LVL)
Rapid
3
62.6˝
GT2540LVL (GIGT2540LVL)
Rapid
4
GT2941LVL (GIGT2941LVL)
Rapid
4
◆ Includes removable rubber feet, allowing you
to easily change worn out rubber feet or to fit
other accessories, such as spiked feet or
snow/sand shoes.
◆ Rapid column can be inverted for an alterna-
tive shooting angle or low level macro work.
◆ Center column locking collar above the tri-
pod shoulder makes it easy to quickly adjust
the column. Built with anti-rotation grooved
center column for improved stability.
◆ Built-in accessory hook lets you hang a stabi-
lizing weight (camera bag or a sand/water
bag) from the bottom of the tripod center
column. Ideal for use with long heavy lenses,
on uneven ground or in windy conditions.
The hook can hold up to 40 lbs.
◆ Includes anti-dust bag for storage
Minimum
Height
Closed
Height
Weight
Max. Load
Capacity
Price
54.3˝
14.2˝
25.6˝
3.5 lbs
26.5 lbs
659.95
67.7˝
59.4˝
12.6˝
24˝
3.7 lbs
26.5 lbs
744.95
71.7˝
59.8˝
12.6˝
24˝
4.2 lbs
22 lbs
574.95
(212) 444-5027 • 1-800-947-9927 • Quick Dial 73
PHOTO - VIDEO - PRO AUDIO
414
C AM E R A S U P P O R T
GITZO
MOUNTAINEER SERIES
Carbon Fiber Tripods
When Gitzo launched the Mountaineer tripods in 1994, they were the world’s first carbon fiber tripods. Ever since then they’ve
set the standard for performance and quality. The main feature of the range is the new 6x carbon fiber tube, made of a unique
structure of 6 crossed layers that maximizes rigidity, vibration absorption and lightweight performance. 6x tube has a high
density structure made of top quality ultra-thin carbon fibers (7µm or 0.007 mm). Built-in Anti Leg Rotation is now a feature
of the whole carbon fiber range. Mountaineer tripods have been further improved with features and details that increase
performance, versatility and quality. G-Lock leg locking system increases system rigidity by 20% and allows quicker and stronger
leg locking. Solid machined aluminium upper disc with a new Safe Lock material cuts vibration and improves grip between
tripod and head. The upper disc can also be fitted directly to the upper casting, removing the center column for ground level
photography or to save weight. All Mountaineer tripods come with a convenient anti dust bag for storage and packing.
◆ Mountaineer tripods set a new standard.
◆ G-Lock locking system has been redesigned
Every single component has been reviewed to
reach a new level of quality and performance.
◆ Anti Leg Rotation system means the tripod
can be opened in less than 15 seconds.
Simply loosen all the twist locks on each leg
at the same time, then pull the leg down and
tighten the locks individually.
◆ The rapid column can easily be inverted for
low level shooting and macro work.
stabilizing weight (camera or a sand/water
bag) from the bottom of the tripod center
column. Ideal for use with long heavy lenses,
on uneven ground or in windy conditions.
The hook can hold up to 40 lbs.
◆ Center column locking collar above the tripod
◆ Includes removable rubber feet, allowing you
shoulder makes it easy to adjust the column
quickly. Built with anti-rotation grooved
center column for improved stability.
to easily change worn out rubber feet or to fit
other accessories, such as spiked feet or
snow/sand shoes.
Series 00
(Table Series)
Carbon 6x
Carbon 6x is a high
density tube made of
top quality ultra thin
(7µm) carbon fibers
(a 28 mm tube
contains 1.500.000
carbon fibers) in a
unique structure of
6 crossed layers that
minimizes weight yet
maximizes rigidity, vibration absorption and performance.
In order to optimize the weight to strength ratio, Gitzo
varied the wall thickness of 6x tube according to tripod
series: tubes for Series 00, 0 and 1 are 1mm thick, tubes for
Series 2 are 1.2mm thick, Series 3 tubes measure 1.3mm,
Series 4 1.4mm and Series 5 is 1.5mm. All 6x tubes feature
built-in Anti Leg Rotation system.
The smallest and lightest tripod in the Gitzo
range, Series 00 offers surprisingly good rigidity.
Ideal for spotting scopes, binoculars, compact
and DSLR cameras with lenses up to 175mm.
Convenient for use on top of tables or when
working at ground level.
Recommended for compact cameras, lightweight
camcorders and DSLRs with a range of lenses
from wide angle to 135mm. Given its small size
and extremely light weight, this tripod offers an
interesting compact solution for the latest
generation of digital equipment. The G-lock
system and improved tube structure give good
performance in terms of torsional rigidity.
Leg
Sections
Max. Height with
Max. Height
Extended Center Column Column Down
GT-530 (GIGT530)
Rapid
3
26.4˝
GT0530 (GIGT0530)
Rapid
3
51.5˝
GT0540 (GIGT0540)
Rapid
4
55.9˝
46.5˝
www.bhphotovideo.com
GT-530
Series 0
(Weekend Series)
Column
Type
PHOTO - VIDEO - PRO AUDIO
◆ Built-in accessory hook lets you hang a
in order to achieve a 20% increase in rigidity,
faster operation and stronger, safer locking.
G-Lock’s special design also provides a“gravity lock” effect: the higher the load applied
vertically to the leg, the stronger the lock.
GT0540
Minimum
Height
Closed
Height
Weight
Max. Load
Capacity
Price
22˝
11˝
12.2˝
0.8 lbs
6.6 lbs
334.95
42.1˝
10.6˝
20.9˝
1.6 lbs
11 lbs
364.95
18.9˝
24˝
1.7 lbs
11 lbs
434.95
C AM E R A S U P P O R T
415
GITZO
MOUNTAINEER SERIES
Series 1 Mountaineer Sport Tripods
An excellent choice for compact digital cameras and DSLRs with a range of lenses up to a
maximum of 200mm, the GT-1530, GT-1540 and GT-1540G Mountaineer Sport tripods
set the standard for lightweight tripods, offering a high maximum load together with a
very low weight. Traveling with a tripod has never been so easy. They offer excellent
maximum load capacity and good torsional rigidity at a reduced weight.
GT2350
Mountaineer
Sport Tripod
Series 2 Mountaineer Reporter Tripods
Recommended for lightweight camcorders, spotting scopes and DSLRs with a range of
lenses up to 300mm maximum. Excellent maximum load capacity and good torsional
rigidity, available in 3- and 4-section models at standard and eye level heights. Series 2 is
the ideal solution for photographers that are looking for a solid tripod without sacrificing weight. They have a maximum load capacity of 27 lbs., and are available in a geared
version that combines the strength and stability of the Mountaineer range with the precision height adjustment of an aluminum geared column.
GT3540
Mountaineer
Tripod
Series 3 Mountaineer Studex Tripods
For photographers who will settle for nothing less than a Studex Carbon Fiber Tripod,
but require the extra stability for heavy loads. Scaled for professional equipment,
medium format and DSLRs with a range of lenses up to 400mm maximum. High
maximum load capacity and outstanding torsional rigidity, Available in 3- and 4-section
models at standard and eye level heights. Series 3 Carbon 6x tripods are surprisingly
lightweight which makes them an excellent choice for photographers that travel.
Ground Level Set—
available on all Mountineer Tripods
For low angle shooting, the center column can be removed and the upper disc fitted
directly to the tripod top casting. The disc is locked into position using the retractable
column hook. The ground level configuration can be achieved in a few seconds
without tools or extra components, and only the column need be removed. With this
effective and simple built-in solution, Gitzo has dramatically increased the ways you can
use the tripod.
Column
type
Leg
sections
Max. height
with extended
center column
Max. height
column
down
Mountaineer
Studex Tripod
Min.
height
Closed
height
Weight
Max. Load
Capacity
Price
GT1540G (GIGT1540G)
Geared
4
58.7˝
52.4˝
11.4˝
20.5˝
2.8 lbs
17.6 lbs
594.95
GT1530 (GIGT1530)
Rapid
3
61˝
52.8˝
13.4˝
24.4˝
2.5 lbs
17.6 lbs
479.95
GT1540 (GIGT1540)
Rapid
4
62.6˝
54.3˝
11.4˝
21.3˝
2.5 lbs
17.6 lbs
534.95
GT2540G (GIGT2540G)
Geared
4
62.6˝
50.8˝
11.8˝
21.3˝
4 lbs
26.5 lbs
639.95
GT2540 (GIGT2540)
Rapid
3
61.4˝
52.4˝
11.4˝
22˝
3.1 lbs
26.5 lbs
574.95
GT2530 (GIGT2530)
Rapid
3
63.4˝
54.3˝
13˝
25.6˝
3.2 lbs
26.5 lbs
519.95
GT2541L (GIGT2541L)
Rapid
4
68.9˝
59.4˝
12.6˝
24˝
3.3 lbs
26.5 lbs
649.95
GT3540 (GIGT3540)
Rapid
4
63.4˝
63.4˝
14.2˝
21.7˝
4.4 lbs
39.7 lbs
699.95
GT3530 (GIGT3530)
Rapid
3
64.4˝
64.6˝
17.3˝
26˝
4.7 lbs
39.7 lbs
629.95
GT3540L (GIGT3540L)
Rapid
3
71.3˝
71.3˝
15.4˝
23.6˝
4.7 lbs
39.7 lbs
774.95
(212) 444-5027 • 1-800-947-9927 • Quick Dial 73
PHOTO - VIDEO - PRO AUDIO
416
C AM E R A S U P P O R T
GITZO
BASALT SERIES
“Rock Solid” Tripods Made from Space-Age Materials
Gitzo the first and only manufacturer of a new generation of tripods that use Basalt fiber
tubes. The fiber is made from basalt rock which is crushed and melted (at 1500°C or
2735°F). The extacted fibers are transformed into a tube via the same technology used for
Gitzo Carbon 6X tube. Basalt tube has most of the features of carbon fiber, like high
thermal and dimensional stability and reduced weight (20% lighter than aluminum). Like
6X, it is engineered to match Gitzo’s performance standards. Basalt tubes have a 1.2mm
thick wall, a 3 crossed layer structure with built in Anti Leg Rotation (ALR). The performance and price of Basalt tripods puts them between aluminum and high performance
Carbon 6X. Features inherited from the Mountaineer tripods include G-Lock leg locking
system that increases system rigidity by 20% and allows quicker and stronger leg locking and the new “Ground Level Set” feature that allows the upper disc to be fitted directly to
the top casting, removing the center column for ground level photography or to save
weight. Basalt tripods come with a convenient anti dust bag for storage and packing.
FEATURES
◆ Basalt tube is 20% lighter than aluminum
◆ The rapid column can easily be inverted for
and offers intermediate performance between aluminum and Carbon 6x tubing.
low level shooting and macro work.
◆ The center column locking collar above
◆ Every single component of
the tripod shoulder makes it easier to
adjust the column quickly. Built with
an anti-rotation grooved center column
for improved stability.
the Basalt tripod
range has been fine-tuned to reach new levels
of quality and performance.
◆ G-Lock system has been redesigned in order
◆ Built-in accessory hook lets you hang a stabi-
to achieve a 20% increase in rigidity, faster
operation and stronger, safer locking. GLock’s special design also provides a “gravity
lock” effect: the higher the load applied vertically to the leg, the stronger the lock.
lizing weight (camera or a sand/water bag)
from the bottom of the tripod center column. Ideal for use with long heavy lenses, on
uneven ground or in windy conditions. The
hook can hold up to 40 lbs.
◆ Anti Leg Rotation system means the tripod
◆ Includes removable rubber feet, allowing you
can be opened in less than 15 seconds. Simply loosen all the twist locks on each leg at
the same time, then pull the leg down and
tighten the locks individually.
to easily change worn out rubber feet or to fit
other accessories, such as spiked feet or
snow/sand shoes.
◆ The upper disc is a completely new design,
made of a special techno polymer that maximizes locking performance. For low angle
work, it can be mounted directly to the top
casting (Ground Level Set feature). The 1/4 3/8˝ reversible screw has been redesigned for
more reliable functionality.
◆ For low angle shooting, the center column
can be removed and the upper disc fitted directly to the tripod top casting. The disc is
locked into position using the retractable column hook. The ground level configuration
can be achieved in a few seconds without
tools or extra components, and only the column need be removed. With this effective
but simple built-in solution, it dramatically
increases the ways you can use the tripod.
Column
type
Leg
sections
Max. height
with extended
center column
Max. height
column
down
Min.
height
Closed
height
Weight
Max. Load
Capacity
Price
GT-921 (GIGT921)
Rapid
2
33.5˝
24˝
15.4˝
17.3˝
1 lbs
6.6 lbs
265.95
GT0931 (GIGT0931)
Rapid
3
52.4˝
42.9˝
10.6˝
21.7˝
1.9 lbs
8.8 lbs
299.95
GT1931 (GIGT1931)
Rapid
3
66.1˝
53.5˝
13.4˝
25.6˝
3.1 lbs
15.4 lbs
534.95
GT2931 (GIGT2931)
Rapid
3
64.6˝
52˝
12.6˝
25.2˝
3.6 lbs
22 lbs
359.95
GT2941 (GIGT2941)
Rapid
4
66.1˝
53.5˝
11.4˝
22˝
3.7 lbs
22 lbs
404.95
GT2941L (GIGT2941L)
Rapid
4
72.4˝
59.4˝
12.2˝
23.6˝
3.9 lbs
22 lbs
574.95
PHOTO - VIDEO - PRO AUDIO
www.bhphotovideo.com
C AM E R A S U P P O R T
417
GITZO
EXPLORER
The Explorer is a tripod designed for special applications; a versatile support to explore new
shooting perspectives. Thanks to its unconventional design, the legs can be set at any angle and
moved independently while the center column
tilts and rotates freely to any position. The Explorer unleashes its potential when used with a
Gitzo off-center ball head, a combination that
makes it the ideal tripod for creative photographers looking for unconventional shots: close to
ground, upside-down or in tight or awkward
spaces. Ideal applications are outdoor macro and
nature photography, still life and architectural.
Explorer tripods in both Carbon 6x and Basalt
feature G-Lock, leg locking system that increases system rigidity by 20% and allows quicker and stronger leg locking. Carbon 6x
Explorers feature a solid machined aluminum upper disc with a new Safe Lock material that cuts vibration and improves grip
between tripod and head. Explorer tripods (except G220) also come with a convenient anti dust bag for storage and packing.
FEATURES
◆ The key technical solutions devised for the
◆ The center column locking collar above
Explorer are its free leg angle locking and its
offset center column with free inclination
and rotation lock. Combined with features
such as the stabilizing hook and invertible
column, they'll help you discover new ways
of using a tripod.
◆ The Explorer’s legs can be positioned inde-
the tripod shoulder makes it easier to
adjust the column quickly. Built with
an anti-rotation grooved center column
for improved stability.
pendently at any angle from 0° to 90°.
◆ The best choice for DSLR or for lightweight
◆ G-Lock system has been redesigned in order
to achieve a 20% increase in rigidity, faster
operation and stronger, safer locking. GLock’s special design also provides a “gravity
lock” effect: the higher the load applied vertically to the leg, the stronger the lock.
◆ Fitted with a column that can tilt from verti-
cal to beyond horizontal, rotate 360° and
lock safely at any intermediate angle.
◆ Anti Leg Rotation system means the tripod
◆ Includes removable rubber feet, allowing you
can be opened in less than 15 seconds. Simply loosen all the twist locks on each leg at
the same time, then pull the leg down and
tighten the locks individually.
to easily change worn out rubber feet or to fit
other accessories, such as spiked feet or
snow/sand shoes.
camcorders. Recommended for lenses up to
300mm maximum. Series 2 offers an excellent maximum load capacity and very good
torsional rigidity. Weight and size are convenient for travelling or trekking.
◆ Built-in accessory hook lets you hang a stabi-
lizing weight (camera or a sand/water bag)
from the bottom of the tripod center column. Ideal for use with long heavy lenses, on
uneven ground or in windy conditions. The
hook can hold up to 40 lbs.
Column
type
Leg
sections
Max. height
with extended
center column
Max. height
column
down
Min.
height
Closed
height
Weight
Max. Load
Capacity
Price
GT2530EX (GIGT2530EX)
Rapid
3
66.9˝
55.5˝
0˝
26.8˝
4.1 lbs
26.5 lbs
539.95
GT2540EX (GIGT2540EX)
Rapid
4
64.6˝
43.1˝
0˝
22.4˝
4.1 lbs
26.5 lbs
579.95
GT2931EX (GIGT2931EX)
Rapid
3
59.8˝
58.8˝
0˝
25.2˝
4.4 lbs
22 lbs
439.95
G2220 (GIG2220)
Rapid
3
63.8˝
49.6˝
0˝
25.2˝
5.2 lbs
19.8 lbs
249.95
(212) 444-5027 • 1-800-947-9927 • Quick Dial 73
PHOTO - VIDEO - PRO AUDIO
418
C AM E R A S U P P O R T
GITZO
MONOPODS
Monopods are traditionally used at sport events and in situations where
space is tight and framing speed is a key factor. The ideal monopod needs
to be lightweight, extremely fast to open and close, fast and precise in
height adjustments for sudden changes in shooting position. Thanks to
ALR and G-Lock, Gitzo monopods continue to set the standard for professionals and advanced amateurs. The range has been completely revised w
to offer lighter, faster and more stable products.
Available on Carbon fiber, Basalt and Aluminum (GM2340 only) models,
Anti Leg Rotation makes them incredibly fast to operate and the height
can be easily and precisely adjusted. Carbon 6x crossed layer tubing makes
carbon fiber models surprisingly light and even more convenient for transportation. Carbon fiber and Basalt monopods also feature the G-Lock system for faster and stronger locking and increased rigidity. All ‘GM’
monopods come with a convenient anti dust bag for storage and packing.
GM2560T Traveler Monopod (GIGM2560T)
The GM2560T Traveler combines advanced Gitzo technology into exceptionally compact dimensions. It features ultra light Carbon 6x tubes, Anti
Leg Rotation, 6-section construction and Safe Lock upper disc. It can be fully extended in seconds, allowing unsurpassed flexibility of use. Stores in
any computer bag and it is recommended for “frequent flyer” photographers. ..........................................................................................................209.95
GITZO MONOPODS
Construction
Minimum
Height
Maximum
Height
Weight
Maximum
Load
Number of
Sections
Price
GM2560T (GIGM2560T)
6x Carbon
14.2˝
56.3˝
1 lbs.
9.5 lbs.
6
209.95
GM2540 (GIGM2540)
6x Carbon
20.9˝
63˝
0.8 lbs.
26.5 lbs.
4
239.95
GM3550 (GIGM3550)
6x Carbon
21.3˝
75.6˝
1.4 lbs.
40 lbs.
5
274.95
GM5540 (GIGM5540)
6x Carbon
21.7˝
63.8˝
1.9 lbs.
55 lbs.
4
304.95
GM2941 (GIGM2941)
Basalt
20.5˝
61.8˝
1.2 lbs.
22 lbs.
4
179.95
GM2340 (GIGM2340)
Aluminum
19.3˝
61.4˝
1.3 lbs.
19.8 lbs.
4
154.95
G1566 (GIG1566)
Aluminum
16.1˝
55.1˝
1.6 lbs.
28.7 lbs.
6
145.00
G1564 (GIG1564)
Aluminum
23.2˝
62.6˝
2 lbs.
28.7 lbs.
4
126.95
G1564L (GIG1564L)
Aluminum
23.6˝
79.5˝
2.1 lbs.
28.7 lbs.
5
141.95
G1560 (GIG1560)
Aluminum
31.9˝
64.6˝
0.9 lbs.
4.4 lbs.
3
135.00
LegCoat Tripod Leg Covers
LegCoat tripod leg covers help you protect your shoulders when carrying your gear and also break up the
shape of your tripod at the same time. Made of heavy-duty closed cell neoprene and foam padding, they are
soft to the touch but rugged in function. These covers come in a set of three, sized specifically for Gitzo or
Manfrotto tripod models. The padding guards your hands from the cold tripod legs in lower temperatures,
and can protect the tripod from minor nicks and scratches. Made with “hook & loop” fasteners for easy
assembly. Covers are available in a standard (Forest Green) camouflage pattern, Max 4 HD, Black, and
RealTree Hardwoods Snow (blends perfectly with snow-covered trees, bushes and rocks, which are seldom
seen with a complete covering of snow). Call or go on-line to find the correct cover.
PHOTO - VIDEO - PRO AUDIO
www.bhphotovideo.com
C AM E R A S U P P O R T
419
GITZO
TRIPOD HEADS
The Gitzo range is composed of different styles of heads that allow you to choose the best head for your needs. Each Gitzo head
has been carefully designed to work with a specific tripod series. There are heads in various designs and sizes which allow the
photographer to position any camera precisely for the required shooting position, with minimum effort to obtain optimum results. Gitzo introduced Magnesium heads to the photographic industry, which offer the advantage of being up to 20% lighter and make perfect partners to Gitzo carbon fiber tripods. Gitzo heads cover all angles!
Center Ball Heads
G1377M
Center
Ball
Head
Exceptional fluid movement and total locking stability are the targets set for Gitzo’s range of center ball heads.
With their ergonomic design, they are easy and intuitive to use, while their advanced precision engineering
guarantees high performance locking with a wide range of camera equipment. Independent pan and tilt
controls lock the head exactly where it is set, without movement. All locking knobs have a rubber coating for a
softer touch and an excellent grip.
The G1177M features a single lock for rapid and reliable locking in any position. The innovative Teflon
coating applied to the ball surface of the larger heads (G1277M/G1377M and G1378M) makes camera
positioning adjustments smoother than ever by eliminating all traces of jarring and skipping. The G1377M
and G1378M incorporate a separate friction control which can be set to counterbalance the weight of the camera, giving total control over the finest adjustments.
Series
Plate Type
Pan
Tilt
G0077
00
Fixed with 1/4-20˝ screw
360°
G1077M
0
Fixed with 1/4-20˝ screw
G1177M
1
Fixed with rev. 1/4-20˝ - 3/8˝ screw
G1178M
1
Quick Release with 1/4˝ screw
360°
+90°/-20°
G1277M
2
Fixed with rev. 1/4-20˝ - 3/8˝ screw
360°
+90°/-30°
G1278M
2
Quick Release with 1/4˝ screw
360°
+90°/-30°
G1377M
3
Fixed with rev. 1/4-20˝ - 3/8˝ screw
360°
+90°/-40°
G1378M
3
Quick Release with 1/4-20˝ screw
360°
+90°/-40°
Pan
Locking
Height
Weight
Max
Capacity
Price
+90°/-20°
2.3˝
0.17 lbs
2.2 lbs
38.95
360°
+90°/-20°
2.3˝
0.26 lbs
4.4 lbs
72.95
360°
+90°/-20°
3.5˝
0.68 lbs
8.8 lbs
101.95
•
•
•
•
Ball
Locking
•
•
•
•
Friction
Control
•
•
3.8˝
0.88 lbs
8.8 lbs
157.95
4.5˝
1.1 lbs
13.2 lbs
162.00
4.7˝
1.3 lbs
13.2 lbs
247.00
5.5˝
1.9 lbs
17.6 lbs
210.95
5.7˝
2.4 lbs
17.6 lbs
288.95
Off-Center Ball Heads
Gitzo off-center ball heads offer a range of movement impossible with conventional heads, and are
renowned for their smooth operation and positive locking mechanisms. The rotating center socket is the
reason why the they let you reach so many unusual angles. In fact, it’s so extreme and so versatile that it allows a camera mounted on an inverted center column to be set right side up! A graduated base with independent lock allows perfect panoramic positioning. A teflon-based anodizing process gives it a refined,
super-smooth movement.
These lightweight magnesium (20% lighter than the equivalent alluminum alloy head) off-center heads
offer fixed or quick release camera plate versions. All non-quick release plate models have a single “I” slot
for the camera mounting screw to allow fine positioning on the camera on the head. The design of these
heads allows you to work in any axis which makes it the perfect head for the Explorer range of tripods.
G1275M Off-Center Ball Head
Series
Plate Type
Pan
Side Tilt
Front/Back Tilt
Height
Weight
Max Capacity
Price
G1275M
2
Fixed with 1/4-20˝ screw
360°
+90°
360°
4.33˝
1.21 lbs
11 lbs
157.95
G1276M
2
Quick release with 1/4-20˝ screw
360°
+90°
360°
4.72˝
1.41 lbs
11 lbs
194.95
G1375M
3
Fixed with 1/4-20˝ screw
360°
+90°
360
5.12˝
1.84 lbs
13.2 lbs
216.00
G1376M
3
Quick release with 1/4-20˝ screw
360°
+90°
360°
5.51˝
2.07 lbs
13.2 lbs
251.00
G1576M
5
Quick release with 1/4-20˝ screw
360°
+90°
360°
5.91˝
2.82 lbs
22 lbs
328.00
(212) 444-5027 • 1-800-947-9927 • Quick Dial 73
PHOTO - VIDEO - PRO AUDIO
420
C AM E R A S U P P O R T
MANFROT TO
DIGI TRIPODS
Manfrotto offers one of the widest range of tripods, heads and accessories for digital applications around the world. Their
products are packed with well thought out features that make each piece of equipment easy to use and as versatile as possible. All
tripods are carefully designed to optimize the critical balance between weight for portability, maximum and minimum height
for low level as well as high level camera shooting, loading capacity and sturdiness. All models are engineered for
reliability, vibration resistance, and long life. The wide choice of precision-built heads makes it easy to exactly match the need.
Tripod heads are interchangeable for maximum versatility and economy. Heads and accessories are universal. You can be sure of
outstanding images, whether in the studio or on location, with Manfrotto’s well-proven equipment to support you.
709BR Digi Tabletop
715B/715SHB Digi Tripod
Lightweight and compact,
these 4-section table-top
tripods are perfect for a
wide range of digital
photographic
applications. Developed
to maximize the
superior imaging capabilities
and versatility of today’s compact digital
cameras, the 709 series Digi-Table Tops sets up in
seconds to form an exceptionally stable shooting
platform that can be used virtually anywhere, indoors or out. It sports a handsome bright
aluminum finish and comes complete with a silkysmooth Manfrotto Mini Ball Head providing 360°
pan and ± 90° tilt. A convenient belt-loop carrying
pouch is also available for it ............................28.95
709B Digi Table Top (BO709B):
Same as above in Black finish..........................28.95
The most compact, full size tripod in the Manfrotto range - the
715B and 715SHB DIGI are four section tripods with an integral
ball head with micro “dovetail” quick release plate. The ball
mechanism retracts into the main shoulder casting for an even
shorter folded length in transport. The leg pivot uses a unique
single hinge design in aluminum which both keeps the cross
section smaller and allows the leg to fold shorter than
conventional tripods. The built-in ball head allows you to
adjust and set its friction so that it balances the weight of
your camera without needing locking and unlocking
between positions. All you have to do is point the camera
and shoot. Adjustment is via a handle found on the bottom
of the column; set it for your camera and forget it!
If you prefer to lock the head for extra security, just turn the
handle one more time. Despite the reduced size, there’s been
no compromise of stability.
Head movements: Pan 360° / Tilt ±90°
715SHB Digi Tripod (BO715SHB): ....................................................................................89.95
715B Digi Tripod: Same as 715SHB, but with longer leg tubes for greater extended
height (BO715B) ..................................................................................................................89.95
718B/718SHB Digi-Tripods
The compact 718B and 718SHB have a built-in hybrid video/photo 3-way
head. The 718B has longer leg sections for greater extended height (48.5˝).
The both have a “dovetail” quick release camera plate (which can be locked
in place one-handed), separate pan and tilt locks, and a short pan/tilt bar
for more ergonomic use while panning or tracking moving subjects. Like
the 714SHB, the 718SHB is an extremely compact 4-section tripod with a
short 15.9˝ folded length that will fit in your luggage with space left over.
On both 718B and 718SHB, the leg pivot system uses a unique single hinge
design in aluminum which both keeps the cross section smaller and allows
the leg to fold shorter than conventional tripods. The tripods are built with
“D” profile tubular legs for extra torsional rigidity and quick flip leg locks
for ease and speed of set-up. A quick action lever also blocks the reversible
center column extension. The 718B and 718SHB come complete with a
carrying bag with twin shoulder straps for backpack style carrying.
718B Digi Tripod (BO718B) ....................................................................99.95
718SHB Digi Tripod
PHOTO - VIDEO - PRO AUDIO
718SHB Compact Digi Tripod (BO718SHB) ..........................................99.95
www.bhphotovideo.com
718B Digi Tripod
C AM E R A S U P P O R T
421
MANFROT TO
DIGI TRIPODS
725B Digi-Tripod
728B Digi-Tripod
Designed for today’s digital and conventional
cameras, this lightweight and compact tripod
offers all the rock steady support necessary for
high quality imaging. Handsome black anodized legs and black painted castings reveal a
tripod with features and an unbeatable price.
The Digi 725B is a lightweight marvel that
can meet any shooting need. The 725B incorporates a traditional quick release ball head
with +90°/-90° portrait orientation grooves
and single repositionable “ratchet” locking
lever.
It comes complete with a carrying bag with
twin shoulder straps for backpack style carrying. Ideal for fitting into luggage, four section
tripod legs permit a folded length of just 19˝.
Once on location, the 724B extends to over
5-ft. It weighs 3-lbs, and can support digital
cameras up to 7.7 lbs.
725B (BO725B) ........................................109.95
Ideally suited for small digital cameras,
the 728B is a 4-section tripod that provides a stable platform for rock steady
shots. Lightweight and compact, the legs
are constructed of sturdy multi-faceted
tubular aluminum that features new
quick flip lever leg locks for fast set-up
and breakdown. The shoulder of the tripod is made of cast aluminum to increase rigidity, and it incorporates a
unique single hinge design which allows
for a more compact leg section when
folded. The center column is also reversible for low-angle shots, and the integrated 3-way head is also made of cast
aluminum and features a quick release
plate. Pan and tilt movements are extremely smooth. Includes a carry bag
that sports twin shoulder straps for
backpack-style carrying.
728B (BO728B)..............................118.95
Each of the
Manfrotto
Digi Tripods
include a
super
convenient
carry bag
that sports
twin shoulder
straps for
backpackstyle carrying.
725B
728B
715SHB
715B
718SHB
718B
725B
728B
Maximum Load
Maximum Height
Maximum Height with Column
Minimum Height
Closed Length
Weight
709B/BR
4.5 lbs
3.54˝
N/A
N/A
6.69˝
.2 lbs
715B
5.5 lbs
52.4˝
64.2˝
16˝
17.3˝
2.5 lbs
715SHB
5.5 lbs
38.3˝
47.8˝
12.8˝
13.8˝
2.22 lbs
718B
5.5 lbs
54.9˝
65.5˝
18.7˝
19.3˝
3.09 lbs
718SHB
5.5 lbs
41.2˝
48.5˝
15.6˝
15.9˝
2.74 lbs
725B
7.7 lbs
52˝
64.5˝
18.5˝
20˝
3.1 lbs
728B
7.7 lbs
52.4˝
64.8˝
19.1˝
19.4˝
3.86 lbs
(212) 444-5027 • 1-800-947-9927 • Quick Dial 73
PHOTO - VIDEO - PRO AUDIO
422
C AM E R A S U P P O R T
MANFROT TO
NEOTEC
You’re on an outdoor shoot running up against a tight deadline to get all the images
you need; you’ve got no assistants getting your equipment ready for you; if you shoot
handheld, you’re going to be forced to select from a dwindling number of sharp photos
as well as spend more time in post-production, but getting your tripod open, set up and
levelled is going to take up precious moments of the remaining perfect light... sound familiar? So what would you give to have equipment that was on your side
in crucial moments like that? The NeoTec tripod is awesomely fast and easy to use,
with the most innovative rapid opening and closing mechanism available today - just
pull each leg downwards to open and automatically lock it in any position - with no
screws, knobs or levers to tighten or loosen. Then to fold it back up again, press the
mechanism release button and push the leg closed. All in a matter of seconds.
◆ NeoTec rapid opening and closing mechanism
◆ Two-part center column switches between normal and
low-angle work, without forcing you to remove camera
and head every time you need to change position
◆ Leg lock release button for closing the
tripod or shortening each leg for perfect positioning
◆ Patented top casting allows horizontal setting of
the
center column for un usual angles and macro work
◆ Four set leg angle
(25°, 43°, 73° and 90°) positions for
a solid footing at any height
◆ Includes a detachable carrying
handle, which can also be used to
support a counterweight
◆ Waterproof
up to 18˝as the bottom
leg section is sealed
Pull each leg downwards to open
and it automatically locks in any
position -with no screws, knobs or
levers to tighten or loosen.
458B NeoTec Pro Photo Tripod (BO458B)
3-section tripod weighs 5.3 lbs., supports
up to 17.6 lbs., extends to 61.4˝, minimum
height is 3.9˝, closes to 25.2˝ ............329.95
Press the mechanism release button
and push the leg upwards. Release
at any intermediate point to lock
the leg, or push it all the way up to
close.
Manfrotto’s design team consciously ignored how most tripods work and thought instead about how a tripod should work, beginning with
how easily and quickly it should be set up or how effortlessly it should close. At the heart of NeoTec lies an innovative mechanism which,
hidden safely inside the leg and without any external levers or knobs, pushes outwards on the tubing to lock the leg in place at any extension.
The mechanism exerts more locking power the heavier the weight pushing down on it from above. Beyond the extreme ease of use it offers
you, NeoTec is also a workhorse tool for professional photographers - offering stable and strong support that can take the strain of constant
use and safely bear the load of professional camera equipment. But it doesn’t stop there, it also includes a built-in low angle adapter for the
times when the center column length gets in your way, and a convenient handle for more comfortable carrying.
PHOTO - VIDEO - PRO AUDIO
www.bhphotovideo.com
C AM E R A S U P P O R T
423
MANFROT TO
TRIPODS
190XDB
3011N
Lightweight Tripod
Basic Tripod
Builds on the success of the 3001 series,
but has been redesigned to offer better
ergonomics of the leg-angle release
mechanism. It can reach a maximum
working height of 57.5˝, and folds up to
21˝ . Redesigned more ergonomic flip
locks, with only 45° of movement. Four
leg-angle settings (25, 46, 66 & 88°).
Ideal for use with cameras up to SLR
size with medium pro zoom lens attached. Four leg-angle settings (25, 46,
66 and 88°). Weighs 3.7 lbs. and supports up to 11 lbs.
BO190XDB .......................................96.95
Lightweight, sturdy, portable and easy to handle,
this basic tripod is one of the easiest to handle.
Designed for SLR-type film and digital cameras,
it offers a long reversible center column for
extra high adjustment with an innovative three
faceted design that eliminates the problem of
column rotation. It features a single-position
leg spread, and leg collars with double wing
locking knob. Maximum height is 54˝ (71.3˝
with center column extended). Minimum
height is 22˝ and it folds to 24˝. Weighs 4.9 lbs.
and can support up to 13 lbs.
BO3011N......................................................109.95
BO3011BN (Black) ........................................109.95
190XDB
3021N
190XPROB
Professional Tripod
190XB
Lightweight Tripod
Built on the same ergonomically improved design as the 190XPROB but
without the horizontal center column
feature, the 190XB is lighter in weight
and slightly more compact. While it can
reach a maximum working height of
57.5˝, it can also be used as low as 3.3˝
by using the low angle adapter built-in
to the center column. Leg warmers on 2
legs ease handling in extreme weather
conditions, and help to protect the legs.
BO190XB ........................................124.95
BO190XV (Green) ...........................146.00
3021N
190XPROB
Lightweight Tripod
Newly redesigned, the 190XPROB
makes the famous Manfrotto-patented
horizontal center column feature even
easier to use. Now, by extending the column to its highest vertical position, it
can be swung round to horizontal without removing the head or disassembling
the column itself, so switching between
framing and positioning setups is more
convenient than ever. The ergonomics
of the leg angle release mechanism and
the quick action leg locks themselves
have also been greatly improved. Builtin low angle adapter for ground level
shots Leg warmers on two legs.
BO190XPROB.................................144.95
Features rapid action lever leg locks with just
45° movement for fast setup and added security,
a variable height and reversible center column
with three-faceted design that eliminates
column rotation. It feature 4-position leg angle
settings (26°, 45°, 75°, 90°) and a low-angle
adapter built into the center column for low
level shots — only 3.1˝ from ground level. Includes foam rubber leg warmers on two legs to
protect your hands in cold weather, and your
body when carrying the tripod on your shoulder.
Maximum height is 53˝ (70˝ with center
column extended). Folds to 24˝. Weighs 5.1 lbs.
and can support up to 15.4 lbs.
BO3021N......................................................148.95
BO3021BN ...................................................148.95
3021 PRO
190XB
Professional Tripod
3021 PRO
Same as the 3021N but even more versatile!
With a center column designed as an alternative
to the low-angle adapter, the head can be left
mounted to the column when switching between low angle and normal shooting. In addition, the easily removeable center column
doubles as a horizontal arm. Not only does this
allow the camera to be offset from leg position,
but it provides the simplest way possible to
shoot from directly overhead. The top section
of the center column is detached by simply unscrewing the knob at the bottom of the
column. Includes foam rubber leg warmers on
two legs to protect your hands and body.
BO3021P ......................................................157.95
BO3021PB ....................................................157.95
(212) 444-5027 • 1-800-947-9927 • Quick Dial 73
PHOTO - VIDEO - PRO AUDIO
424
C AM E R A S U P P O R T
MANFROT TO
TRIPODS
190MF & 055MF MagFiber Tripods
055MF3
The revolutionary MagFiber tripods combine the strength of magnesium and
carbon fiber. Each leg is crafted from carbon fiber using an exclusive process. Under
intense pressure, extra long carbon fibers are combined with resin to
produce a stronger tube that absorbs more vibration than any other tripod in its
class; all with a wall thickness of only 1.2mm. Manfrotto engineers also replaced all
aluminum tripod components with die-cast magnesium. This switch
represents a lateral move in sturdiness yet a substantial gain in strength and reduction of weight by 30% over similar sized aluminum models.
◆ Carbon fiber three-faced tubes for the
◆ Two-part center column switches between
tripod legs; aluminum and nylon polymer
center column. Magnesium die-casting
(30% lighter than aluminum) for all tripod
parts and stainless steel nuts and bolts
◆ Quick-action adjustable leg lever locks instantly secure leg extensions firmly in place
with no slippage or rotation
◆ Push buttons to operate leg angles to offer
four angle of inclination
◆ Center column converts in seconds to a
lateral arm to provide table-top and
overhead camera positions.
normal and low-angle work without having
to remove the camera and head everytime
you need to change position.
◆ Built-in low-angle adapter (easily detaches
without any tool) forms the top section of
the center column. This enables the head
to be left mounted on the center column
when switching between low-angle and
normal shooting positions.
◆ Supplied hand padded carrying strap doubles
as a hook to hang weight and increase
stability during extreme wind conditions.
190MF4
190MF3 (BO190MF3): 3-section tripod weighs 3.5 lbs., supports up to 8.8 lbs., extends to 56˝, minimum height is 4.3˝, closes to 22˝.....................276.95
190MF4 (BO190MF4): 4-section tripod weighs 3.5 lbs., supports up to 8.8 lbs., extends to 51.6˝, minimum height is 4.3˝, closes to 18.1˝...............288.95
A ’beefier’ tripod to the 190MF series, the 055MF3 and 055MF4 are very light, simple to use, strong, and extremely versatile to position.
055MF3 (BO055MF3): 3-section tripod weighs 4.4 lbs., supports up to 15.4 lbs., extends to 66.5˝, minimum height is 4.3˝, closes to 25.2˝ ............315.95
055MF4 (BO055MF4): 4-section tripod weighs 4.4 lbs., supports up to 15.4 lbs., extends to 65˝, minimum height is 4.3˝, closes to 21.3˝ ................341.95
475 Pro Geared Column Tripod
475 Pro Geared
Column Tripod
The 475 Pro Geared Tripod offers an all aluminum construction, unrivalled
stability, a unique center brace strut system, reliable quick-action leg locks,
non-rollback three faceted center column, a spirit level and rubber/metal
spiked feet. The 475 has a center brace system that can be operated in a
symmetric or asymmetric way. This allows the best of both worlds: speed
by locking the braces so that all of the legs will be spread to the same angle, or
by individually setting the angle of each leg for the ultimate in tripod positioning.
To avoid annoying delays in leveling the tripod, the telescopic center braces
have been designed with two “click stop” positions that allow you to easily
find the same spread angle on all three legs. The 475 also incorporates Quick
Action leg locks, which have an amazingly quick and secure locking range. All
it takes is a 45° flip of the lever to lock and unlock each section.
475 Chrome Tripod (BO475) ..............262.95
PHOTO - VIDEO - PRO AUDIO
www.bhphotovideo.com
475B Black Tripod (BO475B)..............262.95
C AM E R A S U P P O R T
425
MANFROT TO
TRIPODS
3046 Geared Column Tripod
Strong, sturdy and reliable, the 3046 tripod is the ideal studio tripod. The geared
center column has a non roll-black feature and has a threaded 3/8˝ mount on the
bottom of the column to allow low-angle shots. Twin shark leg design, built-in spirit
level and rubber feet with retractable spikes are standard. Uses a center column strut
design for added stability.
3046 Chrome Tripod (BO3046).....................................................................................229.95
3246 Black Tripod (BO3046B) .......................................................................................229.95
3046
Black Tripod (3246)
3051 Geared Column Tripod
Handling everything up to 4 x 5˝, this tripod is capable of extremely low camera
position with the platform at only 17˝, yet has the ability to go up and stand over 7´.
Features patented automatic simultaneous release of all three legs or any individual
leg. This permits the legs to be extended, the tripod levelled (spirit level included)
and locked in seconds without the need for individual leg adjustment. Closing the
legs is achieved by activating the same release. Also has the ability to adjust all angles
individually and secure them with Manfrotto telescopic struts. Rubber feet with
retractable spiked feet are standard. The geared center has a non-rollback feature.
3051 Chrome Tripod (BO3051).....................................................................................303.95
3251 Black Tripod (BO3051B) .......................................................................................303.95
3051 Black
Tripod (3251)
3058 Geared Column Tripod
The tallest tripod in the range, the 3058 is capable of providing a stable
platform for cameras up to 44 lbs. at maximum height of almost 9´ (105.2˝).
On the other hand this giant is also capable of a minimum height of just over 17˝.
The geared center column is self locking. The legs are braced using telescopic structs
for maximum rigidity and the ability to have individually adjustable and lockable
angles. Rubber feet with retractable spiked feet and spirit level are standard
equipment. Ideal for all large format cameras.
3058 Chrome Tripod (BO3058).....................................................................................464.00
3258 Black Tripod (BO3058B) .......................................................................................444.95
3058 Black
Tripod (3258)
190X/3011/3021 TRIPODS
Description
Maximum
Load Capacity
Maximum Height with
Extended Center Column
Minimum
Height
Closed
Length
Weight
190XB
Anodized Aluminum
11.1 lbs.
57.1˝
3.1˝
20.9˝
3.9 lbs.
190XPRO
Anodized Aluminum
11.1 lbs.
57.1˝
3.3˝
22.1˝
4.2 lbs.
3011N
Anodized Aluminum
13.3 lbs.
71.3˝
22.1˝
24.1˝
4.9 lbs.
3021N
Anodized Aluminum
13.3 lbs.
70.1˝
3.2˝
24.1˝
5.1 lbs.
3021PRO
Anodized Aluminum
13.3 lbs.
69.3˝
4.4˝
25.6˝
5.3 lbs.
475/3046/3051/3058 GEARED COLUMN TRIPODS
Description
Maximum
Load Capacity
Maximum Height with
Extended Center Column
Minimum
Height
Closed
Length
Weight
Aluminum
26.5 lbs.
74˝
17˝
31.5˝
9.5 lbs.
3046
Anodized Aluminum
26.5 lbs.
89.4˝
30.4˝
32.3˝
9.2 lbs.
3051
Anodized Aluminum
26.5 lbs.
85.5˝
17.4˝
37.1˝
13.6 lbs.
3058
Anodized Aluminum
44.1 lbs.
105.1˝
17.4˝
41.4˝
17.5 lbs.
475 Pro
(212) 444-5027 • 1-800-947-9927 • Quick Dial 73
PHOTO - VIDEO - PRO AUDIO
426
C AM E R A S U P P O R T
MANFROT TO
MONOPODS
The monopod is an underestimated means of photographic support. It is inexpensive, light to carry, takes little space, and is easy
and fast to erect. Handled correctly, it supplies all the camera support you are likely to need, even for long lenses. Just look at the
press and sports photographers—these pros wouldn’t bother with them if they didn’t get results.
676B Digi
4-Section Monopod
A simple, easy to set up
black anodized aluminum
monopod. The four section
leg design allows it to fold
up to less than 20˝, and it
weighs less than a pound. It
features rapid-action flip
locks for the leg extensions,
strap, and a 1/4-20˝ screw.
676B Black (BO676B) .....30.95
679 3-Section
Monopod
3-section monopod with
sure-rubber grip, quick action lock levers, large 2.3˝
camera/head platform and
dual 1/4 - 20˝ and 3/8˝
camera screw. Quick-Action
lever lock system with 45°
flip allows the sections to be
quickly set-up and adjusted.
679 Chrome (BO679).....41.95
679B Black (BO679B) .....41.95
680 4-Section
Compact Monopod
Rubber grip, quick action
lock levers, large 60mm
camera/head platform and
1/4 - 20˝ and 3/8˝ camera
fixing screw. Closes to 20˝.
Quick-Action lever lock
system with 45° flip allows
the sections to be quickly
set-up and adjusted.
680 Chrome (BO680).....52.95
680B Black (BO680B) .....52.95
PHOTO - VIDEO - PRO AUDIO
685B Neotec
Monopod Deluxe
A fast and easy monopod, with the
most innovative rapid opening and
closing mechanism available today.
Just pull the leg downwards to open
and automatically lock in any
position. No screws, knobs or levers
to tighten or loosen. To close it back
up again, press the release button and
push the leg closed in a matter of
seconds. Its mechanism exerts more
locking power the heavier the weight
pushing down on it from above. Its
“upside down” construction stops the water
you’re standing in from ending up inside
the monopod.
685B Black (BO685B) ...........................130.95
694/695
MagFiber Monopods
Mag Fiber monopods combine
the strength of magnesium and
carbon fiber. Extremely compact,
they are crafted from carbon fiber
using an exclusive, patented
process. Under intense pressure,
extra long carbon fibers are
combined with resin to produce a
stronger tube that absorbs more
vibration - and with a wall
thickness of only 1.2mm!
Manfrotto engineers also replaced all
aluminum components with magnesium.
They are user-friendly, with quick-action
adjustable lever locks that instantly secure
leg extensions in place with no slippage or
rotation. They come with a wrist strap and
camera platform with dual 1/4˝ and 3/8˝
camera fixing screw. The 4-section 694 has
a maximum height of 65˝ and closes to
20.9˝. The 5-section 695 has a maximum
height of 63˝ and closes to 18.1˝.
694 4-Section (BO694) ........................169.95
695 5-Section (BO695) ........................198.95
www.bhphotovideo.com
681 Professional
Monopod
Robust 3-section monopod
with a sure rubber grip, wrist
carrying strap, large 2.3˝
platform with plastic cover
and dual 1/4-20˝ - 3/8˝
camera screw. Quick-Action
lever lock system with 45° flip
allows sections to be quickly
set-up and adjusted.
681 Chrome (BO681) ........50.95
681B Black (BO681B) ........50.95
682 Self-Standing
Pro Monopod
The 682 has all same
features as the 681 Professional Monopod with the
addition of 3 retractable
legs. The three-section 682
monopod features a large
2.3˝ platform with a
plastic cover and a dual
1/4-20˝ - 3/8˝ camera screw.
682 Chrome (BO682).....97.95
682B Black (BO682B) .....97.95
3245 Automatic
3-Section Monopod
The upper section features a
grip-action release that allows
the top section to be adjusted
19˝ up or down automatically
by squeezing and releasing the
grip-action handle.
The lower two sections have
a twist lock action for height
adjustment. Dual 1/4 - 20˝
and 3/8˝ camera fixing screw.
3245 Chrome (BO3245) ....87.95
C AM E R A S U P P O R T
427
MANFROT TO
MONOPODS
3232 Swivel Tilt Head (BO3232)
Simple tilt head to allow a camera on a
monopod to be turned 90° to provide either
vertical or horizontal format ..................19.95
3229 Swivel Tilt Head
with Quick Release (BO3229)
Same as 3232 but with quick release camera
plate and secondary safety lock ..............30.95
3248 Shoulder Brace (BO3248)
Fits the top end of any monopod to give
additional stability. Adjustable length with
pivoting shoulder support ......................21.95
678 Universal Folding Base (BO678)
Allows the addition of a base made of three
foldable high strength steel legs to the
monopods 679, 680, and 681. The legs can be
folded and stored inside the bottom section
of the monopod ready in a few seconds
when needed............................................49.95
677SP2 Rubber/Stainless Steel
Spiked Foot (BO677SP2)
Same as above, for 681 monopod...........16.95
676SC2 Suction Cup/Retractable
Spike Foot (BO676SC2)
Same as above for the 679 and 680.........24.95
449SC2 Suction Cup/Retractable
Spike Foot (BO449SC2)
A rubber suction cup foot with retractable
stainless steel spike. The suction cup increases
the footprint of the monopod by almost 20
times, giving much greater stability when
needed. The foot can be removed and
replaced at will. For the 3449 ..................28.95
3422 Monopod Support (BO3422)
Fixed on the monopod, adds two points of
support making it stable on any surface
regardless of the inclination. Allows long
exposures on automatic release. Comes
complete with the 3009 ballhead. Attachment
- 3/8˝ female for monopod.....................54.95
3421 Long Lens Monopod Bracket (BO3421)
Specifically developed for use with very long
lenses on monopods. Key features: friction
base which enables the bracket to pan on
monopod, also can be used on a tripod.
Two rubber hand grips plus rubber
protection to prevent damage to lens when
tilted to maximum. Variable center height
adjustment in three steps ......................172.95
3229
Swivel Head
678
Folding Base
3257 Spiked Foot for Monopod (BO3257)
Converts 679, 680 and 681 series monopods
rubber foot to a spiked foot ....................13.95
3247 Monopod Belt Pouch (BO3247)
Worn on a belt, this easy to use pouch offers
support for the base of a monopod........14.95
449SPK2 Rubber/Stainless Steel
Spiked Foot (BO449SP2)
Reversible spiked foot supplied with a
dedicated fixing tool. The spike is made of a
special hard stainless steel alloy extremely
resistant to corrosion. For 3449 ..............16.95
3247 Belt Pouch
3422 Monopod
Support
676SP2 Rubber/Stainless Steel
Spiked Foot (BO676SP2)
Same as the above spiked foot, but for
monopods 679 and 680...........................16.95
677SC Foot
677SP Rubber/Spiked Foot (BO677SP)
Rubber foot for with retractable metal spike,
for monopods 679, 680 and 681 .............16.95
677SC Suction Cup/Retractable
Spike Foot (BO677SC)
A rubber suction cup foot with retractable
stainless steel spike for the 681 monopod.
The suction cup increases the footprint of the
monopod by almost 20 times, giving much
greater stability when needed. The foot can
be removed and replaced at will .............28.50
MANFROTTO MONOPODS
Sections
Minimum Height
Maximum Height
Weight
Load Capacity
676B
4
18.9˝
60.6˝
14.1 oz.
10 lbs.
679/679B
3
25.2˝
63.8˝
1.3 lbs.
22 lbs.
680/680B
4
20˝
60.6˝
1.8 lbs.
22 lbs.
681/681B
3
26.4˝
63.4˝
1.7 lbs.
26.4 lbs.
682/682B
3
29.1˝
67.7˝
2.4 lbs.
26.4 lbs.
684B
3
27.9˝
65.6˝
1.6 lbs.
17.6 lbs.
694
4
20.9˝
65˝
1.3 lbs.
11 lbs.
695
5
18.1˝
63˝
1.3 lbs.
11 lbs.
3245
3
26.7˝
65.4˝
1 lbs.
17.6 lbs.
(212) 444-5027 • 1-800-947-9927 • Quick Dial 73
PHOTO - VIDEO - PRO AUDIO
428
C AM E R A S U P P O R T
MANFROT TO
BALL HEADS
Manfrotto’s comprehensive range of ball heads offer smooth movement and positioning of the camera, 360° panning movement
plus 90° tilt, positive locking and quick release camera plate on some heads. Ball heads are favored over 3D heads when speed
and compact size is important.
482 Micro Ball Head
486 Compact Ball Head
▲
Designed for use with small,
compact cameras. The aluminum
housing and extremely hard resin
ball provides smooth movement.
A single control lever locks the ball
and pan movements. Ideal for the
3007 table top tripod, car window
clamp 3293 or 3287 monopods and
Super Clamp 2915 combined with
2907 adapter. Supplied with a large
50mm camera platform. 4.4 lb.
maximum load.
BO482 ..........................................33.95
486 Compact
Ball Head
▲
Same as the 486 but equipped with a 3157N
quick-release camera plate.
BO486RC2 .........................................................64.95
484 Mini
Ball Head
488 Midi Ball Head
▲
486RC2
Compact
Ball Head
With solid aluminum construction and phenolic
resin ball, the 488 head has a maximum load of
17.6 lbs. Has a double-groove for rapid side-toside movement, and a separate fast-action ratchet
lever for 360° pan and easy grip locking knob for
±90° tilt movements. 2˝ camera platform with a
1/4-20˝ male thread.
BO488 ................................................................82.95
▲
488RC0 Midi Ball Head
484RC2 Mini
Ball Head
484RC2
Mini Ball Head
www.bhphotovideo.com
Same as the 488 but equipped with a 3049 quickrelease camera plate with a secondary safety catch
and two spirit levels for precise levelling on both
vertical or horizontal axis. It features a separate
fast action ratchet lever for 360° pan and an easy
to grip locking knob for ±90° tilt movements.
BO488RCO ......................................................100.95
488RC2 Midi Ball Head
▲
488RC0 Midi
Ball Head
▲
Same as the 484, except this versatile
head is fitted with a 3157N
quick-release camera plate with a
secondary safety catch. This head is
perfect for 35mm SLR cameras with
medium lenses, and light medium
format cameras. Incorporates a
spring-loaded, retractable dual
thread (both 1/4-20˝ and 3/8˝) for
your camera and tripod mount, and
features single lever operation. It accepts a maximum load of 8.8 lbs.
BO484RC2 ...................................54.95
PHOTO - VIDEO - PRO AUDIO
Compact, yet strong enough to support heavier
camera loads. Strong die-cast construction,
precision machined aluminum housing, and an
extremely hard phenolic resin ball provides
smooth movements across all tilt positions. Has a
single ratchet locking knob for 360° pan and a
double groove for ±90° tilt movements. Camera
attachment is via a 2˝ platform with a 1/4-20˝
thread. 13.2 lb. maximum load.
BO486 ................................................................56.95
486RC2 Compact Ball Head
▲
484 Mini Ball Head
Designed with the SLR photographer in mind, the 484 Mini Ball
Head features a strong die-cast
construction, precision machined
aluminum housing, and an
extremely hard phenolic resin ball
which provides smoother movements across all tilt positions. The
double-groove also makes this head
extremely versatile, and the single
ratchet control lever securely locks
both the ±90° ball and 360° pan
movements. Camera attachment is
via a 2˝ platform with a 1/4-20˝
male thread, and head to tripod attachment is 3/8˝ female. Maximum
load is 8.8 lb.
BO484 ..........................................40.95
482 Micro
Ball Head
488RC2 Midi
Ball Head
Same as the 488 but with a 3157N quick-release
camera plate with a secondary safety catch. Features a separate fast action ratchet lever for 360°
pan and an easy to grip locking knob for ±90° tilt
movements.
BO488RC2 .......................................................100.95
488RC4 Midi Ball Head
Same as the 488 but with a 3271 quick-release
camera plate with a secondary safety catch and
two spirit levels for precise levelling on both
vertical or horizontal axis.
BO488RC4 .......................................................105.95
C AM E R A S U P P O R T
429
MANFROT TO
BALL HEADS
▲
490 Maxi Ball Head
3265 Grip Action
Ball Head
490 Maxi
Ball Head
490RC4 Maxi Ball Head
Same as the 490 but equipped with a 3271 quickrelease camera plate with a secondary safety catch
and two spirit levels for precise levelling on both
vertical or horizontal axis.
BO490RC4 .......................................................188.95
3265 Grip Action Ball Head
▲
322RC2 Grip
Action Ball Head
468MG
Hydrostatic Ball Head
▲
Versatile, quick and easy to use. Just grip the
handle and you can position your camera
anywhere within a 180˚ sphere. Supplied with a
quick release assembly, camera plate with
secondary safety catch, built-in bubble level and
tension adjustment. Made of cast aluminum, this
head is ideal for cameras with short or medium
focal length lenses. 1/4-20˝ camera attachment.
5.5 lb. maximum load.
BO3265 ..............................................................90.95
The 468MG Hydrostatic Ball Head range
features an unmatched advanced friction and
locking mechanism. Just a slight turn of the
locking knob applies enough pressure to
firmly hold the camera. When it’s time to
move the camera, it’s just as easy to unlock,
and with adjustable friction set, your camera
will never get away from you.
The camera and head move in unison with
no headway effect during the locking phase.
The heads also have a calibrated, adjustable
tension control allowing the ball tension to be
preset for various camera weights.
In addition, they each feature an independent
pan and tilt lock with 360° pan movement
and ±90° tilt movement. The body of each
head is constructed in magnesium die casting
with a 2˝ Teflon coated aluminum ball,
enabling smoother camera movements.
468MG: Weighs 1.4 lbs and has a maximum
load of 35.3 lbs. (BO468MG).....................283.95
468MGRC0: With RCO Rapid Connect
System, weighs 1.9 lbs and has a maximum
load of 35.3 lbs. (BO468MGRC0) ...............315.95
468MGRC3
Hydrostatic Ball Head
468MGRC2: With RC2 Rapid Connect
System, weighs 1.4 lbs and has a maximum
load of 22 lbs. (BO468MGRC2) ..................294.95
468MGRC3: With RC3 Rapid Connect
System, weighs 1.8 lbs and has a maximum
load of 35.3 lbs. (BO468MGRC3) ...............328.95
▲
In addition, mount the 322RS remote control
electronic camera shutter release, and the 322RC2
puts camera control within reach without having
to move your hand from the head grip to the
camera body.
BO322RC2 .......................................................109.95
468MGRCO
Hydrostatic Ball Head
▲
Take the versatility of a ball head, add true
ergonomic control and you get the 322RC2. The
revolutionary 322RC2 allows you to unblock,
move, position and lock your camera with one
hand in one position. A friction control wheel lets
you regulate the power of the blocking mechanism
to match the weight of your camera and lens. The
322RC2 is made from magnesium for lightweight
performance, and is designed to keep the weight
of your equipment as close as possible to the
tripod's center of gravity by way of its reduced
height. Includes a built-in bubble spirit level and
quick release camera plate (1/4 - 20˝ screw, with
secondary safety pin). Load capacity is 11 lbs
(5.5 lbs in the vertical position).
▲
322RC2 Horizontal
Grip Action Ball Head
468MG Series
Hydrostatic Ball Heads
These heads incorporate an advanced ball
locking mechanism using hydrostatic action.
Based on principles of modern hydraulics
where force that is applied at one point is
transmitted to another point using an incompressible fluid, the locking process is improved using a special liquid inserted in the
internal chamber. When pressure is applied,
the liquid blocks the movement of the ball.
Because the force exerted by the liquid is more
constant and evenly distributed, locking
power is dramatically improved.
▲
The top of Manfrotto’s ball head line, the 490 is
made in die-cast aluminum with a precision phenol resin ball. Separate locks on 360° pan and
±90° tilt movements, with an additional friction
control on the ball movement, gives just the right
resistance and smoothness with minimum effort,
even when varying weights of equipment. The 490
attaches to the camera via a 2˝ platform with a
combined 1/4-20˝ and 3/8˝ male thread. Maximum load is 26.4 lbs.
BO490 ..............................................................170.95
468MGRC5
Hydrostatic Ball Head
468MGRC4: With RC4 Rapid Connect
System, weighs 1.6 lbs and has a maximum
load of 35.3 lbs. (BO468MGRC4) ...............323.95
468MGRC5: With RC5 Rapid Connect
System, weighs 1.6 lbs and has a maximum
load of 26.5 lbs. (BO468MGRC5) ...............328.95
(212) 444-5027 • 1-800-947-9927 • Quick Dial 73
PHOTO - VIDEO - PRO AUDIO
430
C AM E R A S U P P O R T
MANFROT TO
3-WAY HEADS
A tripod head is just as important as a tripod. It is necessary to match the task of the tripod, head and camera. For this reason,
Manfrotto offers a wide range of heads designed to carry loads from ultra-lightweight up to 26 lbs. Manfrotto’s 3-Way Heads are
precision-engineered to provide smooth and independent control of pan, backward and forward tilt, plus side-to-side tilt
movements. In fact, the camera position can rapidly change from landscape (horizontal) to portrait (vertical) or adjust to the
appropriate angle that best suits the shot. Large rubber grips on the pan and tilt handles provide efficient control. All heads
come supplied with standard 1/4-20˝ threaded camera screw.
3437 3D Magnesium Head (BO3437)
Cast from lightweight magnesium, this innovative
3D head can be positioned in virtual any position
to get the exact framing of the image. Lock-system
using spring-loaded conical joint allows greater
flexibility than any other 3D head whether
mounted on a tripod center column or lateral arm.
The rubber grip knobs provide fingertip control
and won’t poke you in the eye like conventional
handles do. Supports up to 6.6 lbs....................90.95
3437
Magnesium Head
3025 3D Junior Head (BO3025)
A self-adjusting conical bearing locking system
allows 360˚ rotation on both the vertical and
horizontal plane. This is the ideal head for SLR
and lens up to 6.6 lbs .........................................27.95
3025
Junior Head
804RC2 3-Way Pan/Tilt Head
with RC-2 Quick Release (BO804RC2)
Full 3-way action with each axis movement
controlled by a separate locking handle. Incorporates a quick-release plate with safety lock to make
camera changes as easy as flipping a lever. The
804RC2 head is also the first 3-way head to use a
counter spring system to help protect your
equipment. Handles up to 13.2 lbs. ..................64.00
808RC4 3-Way Pan/Tilt Head
with RC-4 Quick Release (BO808RC4)
This 3-way pan head handles up to 17.5 lbs. and
includes the Double Axis Spring System which
consists of a built-in 3.3 lb spring for both the
front tilt and side tilt movements. This innovative
solution, borrowed from the video industry,
helps to move the camera smoothly while framing the picture, as it helps to balance some of the
camera weight. In addition, it absorbs the shock
to bodies and lenses when reaching the end stop
of the head movement.
Modernized overall shape and many of the hard
edges have been rounded to produce a fresh and
elegant product. Coating on the quick-release
lever is durable and scratch resistant. Handles to
fit comfortably in the hand, even taking into consideration the size of fingers........................116.95
3039 Super Pro Head
with Quick Release (BO3039)
Finely machined for greater positioning with
smooth, certain action. 3 built-in spirit levels for
horizontal and vertical control. A quick release
camera plate with a secondary safety catch offers
added security. Handles up to 26 lbs...........183.95
3039 Super Pro
Head with QR
GEARED HEADS
3263 Deluxe Geared Head (BO3263)
This unique head offers precise geared movement in
three directions. Separate fold away rotating handles
for pan and tilt and side-to-side leveling. In addition,
the tension holding the round quick release plate can
be released to allow fine adjustment with complete safety.
Designed to mount on larger tripods, this geared head is
for medium format cameras providing the ultimate in fine
adjustment and control to achieve the exact framing required. Includes three
1/4-20˝ screws for camera attachment................................................................624.95
3275 (410) Compact Geared Head (BO3275)
Extremely compact, this unique head offers gear movement in
three directions, pan, tilt and side-to-side tilt. It incorporates a
quick release camera plate system and is suitable for SLR
cameras. Maximum load capacity is 11 lbs.....................193.95
PHOTO - VIDEO - PRO AUDIO
www.bhphotovideo.com
405 Pro Digital Geared Head (BO405)
The 405 Pro Digital Geared
Head is designed for digital
photographers who shoot
with camera/back payloads
up to 16.5 lbs.
The 405 utilizes large, easy-togrip knobs that provide smooth,
positive, geared control through 360°
pan and +90° - 30° frontal and lateral
tilt. In addition to its 3-D geared functions, the 405 also
allows you to instantly disengage the gears and rough
position the camera by hand, then instantly reengage
them for ultra-precise final alignment. The 405 comes
complete with quick-release plate, 1/4˝ and 3/8˝ camera
mounting screws, and 3/8˝ tripod mount ................366.95
C AM E R A S U P P O R T
431
MANFROT TO
QTVR SYSTEMS
303 QTVR Panoramic Head Kit
300N Panoramic Head
This head lets you set 10 different angles of rotation: (5, 10, 15, 18, 20, 24, 30, 36, 45, 60, 90°)
or the number of
shots (37, 36, 24,
20, 18, 15, 12, 10, 8,
6, 4 shots) spanning 360° rotation
using the engraved,
graduated scale
markings for reference. The head can be used for precise sequential and constant angle shots or simply for
panning and reading the angle of motion. The
camera can mount directly to the head with
the optional 3054 1/4˝ adapter or on any Ball
or 3D head which mounts on the Panoramic
Head.
BO300N ..................................................170.95
(BO303)
Designed for QuickTime virtual reality technology which allows
virtual scenes to be created by computer from panoramic digital or
digitized images obtained from single shots stitched together. Suitable for most SLR and digital still cameras using wide-angle lenses.
The kit includes a leveling base enabling fine, fingertip
adjustment of ±5° to ensure the camera is perfectly level, the 303
Panoramic Head, and an elbow bracket to ensure the optical
center of the lens is above the point of rotation to avoid parallax
errors and ensure perfect QTVR sequence. The kit features double
sliding plate with 3.1˝ of adjustment for precise positioning, spirit
level and graduated scale to set the angle of rotation from 10˚ to
90˚ or the number of shots spanning 360˚ ..............................341.95
303 Plus
(BO303P)
Similar to the 303 but it incorporates precise geared movement of
the 2 sliding plates used to position the camera on the panoramic
axis of rotation. A release button disengages the gear to facilitate
rapid movement of the plates when required .........................400.95
303SPH QTVR SPHERICAL
PANORAMIC HEAD KIT
The 303SPH is a multi-row (spherical) panoramic photography head. It has sliding plates to
position the camera over the panoramic axis of rotation, plus a sliding plate which rotates
around the front/back tilt axis. This allows the camera to be rotated on both horizontal and
vertical axis around the camera/lens nodal point, so multi-row panoramic photo sequences
(cubic VR photos) can be taken accurately and easily.
Using the 303SPH ensures that software used for photo stitching produces a precisely composed VR environment with minimum post-production intervention or software correction.
The 303SPH’s vertical bracket can be unlocked and rotated through 90° (then re-locked) so
that the head takes up less space in transport, and so that the sliding plate mechanisms are
protected against knocks and bumps. The 303SPH comes complete with an extra set of sliding
plates for use with cameras of different sizes.
◆ Three sliding plates for precise nodal
◆ 3/8˝ female tripod fitting.
point positioning on all planes/axes.
◆ Dual graduated scale to set the angle of
◆ Short plates included for more
convenient use with compact cameras.
◆ Long plates included for use with larger
SLR or medium format cameras.
◆ Camera attachment via 1/4 - 20˝ and 3/8˝
male screw.
rotation to any of the following:
90°, 60°, 45°, 36°, 30°, 24°, 20°, 15°, 10°, 5°
(respectively equivalent to 4, 6, 8, 10, 12,
15, 18, 24, 36, 72 photos to achieve a full
360° rotation) - on upper part of 300N
rotation unit.
BO303SPH
$
54495
◆ Graduated scale from 0° to 360° on lower
part of 300N rotation unit.
◆ By removing vertical brackets, the
303SPH can also be used as an object
turntable.
◆ Vertical bracket folds down and removes
for compact size during transport.
(212) 444-5027 • 1-800-947-9927 • Quick Dial 73
PHOTO - VIDEO - PRO AUDIO
432
C AM E R A S U P P O R T
MANFROT TO
TRIPOD ACCESSORIES
3288 Elbow Bracket (BO3288)
The “Elbow Bracket” enables one to rapidly
change from a horizontal to a vertical
shooting position, without having to
reposition the tripod and to keep an axis of
vision which is vertical to the tripod itself,
thus avoiding the threat of tilting.
Compatible with the following heads:
3047, 3039 and 488RC0. Comes complete
with 1/4-20˝ to 3/8˝ screws.....................59.95
341 Junior Elbow Bracket (BO341)
Enables you to rapidly change from a
horizontal to a vertical shooting axis, without
having to reposition the tripod. Its adjustable
stop prevents accidental camera rotation.
Great for small & medium sized cameras
with telephoto lenses. Use on all heads
equipped with the 3157N type of camera
plate, including: 3030, 3265, 3437, 468RC2,
486RC2, 488RC2, 468RC2.......................58.50
155RC Double Ball Joint Head
with Quick Release Adapter (BO155RC)
Not strictly a tripod head, but an extremely
versatile support for compact and 35mm
cameras used in conjunction with the 2915
Super Clamp. Supplied with quick release
plate and secondary safety lock...............49.95
2929QR Variable Friction Magic Arm
with Quick Release Plate (BO2929QR)
Articulated arm with large locking knob,
variable friction and locking of arm is done
by adjusting the knob. Supplied with quick
release camera plate with secondary safety
lock. Ideal for mounting a camera exactly at
the angle you need it. Fits any 5/8˝ female
socket, works especially well with 2915
Super Clamp. .........................................112.95
2930QR Magic Arm with
Quick Release Plate (BO2930QR)
Your extra arm in the studio. One lever locks
three pivot points. Supplied with a quick
release camera plate with a secondary lock.
Ideal for mounting a camera exactly the angle
you need it.Fits any 5/8˝ female socket, works
great with 2915 Super Clamp................109.95
3288
155RC
3419
3500
3500 Pump Cup with Flat Base (BO3500)
A suction cup for lightweight equipment. The
disc’s diameter is 2.3˝, it weighs 1.36 lbs. and
has a 3/8˝ thread to accommodate most any
Manfrotto head .........................................69.95
3289 Suction Grip
with Camera Support (BO3289)
Attaches to most non-porous surfaces. Ideal
camera support in automobile or next to a
window. Incorporates a separate brace that is
designed to go down to the car floor for added
stability ....................................................106.50
2929QR
3292 Car Window Pod (BO3292)
Clamps onto car window, with a 3/8˝ thread
to accept small or medium sized Manfrotto
heads..........................................................26.95
3292
3292 Car Window Pod with 3-Way Pan/Tilt
Head with Quick Release (BO3292390RC2)
This kit combines the 3292 Pod with the
390RC2 3-way pan/tilt head.....................79.95
3502
241 (3294) Suction Grip with Socket (BO241)
Suction cup for small fixtures and lightweight
equipment .................................................63.95
2930QR
2934
3502 Ball Camera Leveller (BO3502)
Weighing 1.4 lbs. and capable of holding 33
lbs., the 3502 provides fast leveling for
tripods without built-in levels. Fits between
the center column and head and has 10˚ of
adjustment ...............................................73.95
PHOTO - VIDEO - PRO AUDIO
3419 Micro Positioning Plate (BO3419)
Ideal for macro photography to make precise
positioning movements, for QTVR and other
precise copy/repro work, the sliding plate has
finger tip control for ultra-fine positioning –
but with a simple lock-release lever for fast
set-up. Two plates can be interlocked at 90° for
full lateral/ forward/back movement (over
4.7˝). In extruded aluminum, the plate has
1/4-20˝ and 3/8˝ holes and screws for tripod
and camera mounting. .............................89.95
www.bhphotovideo.com
2915 Super Clamp (BO2915)
This universal clamp can be securely
mounted on any tube from 0.5 to 2.1˝.
Attachment is 5/8˝ hexagonal socket. It
includes a wedge adapter to allow clamping
onto a flat surface......................................24.95
2934 3/8˝ Head Mounting Plate (BO2934)
Allows use of 3/8˝ camera mounting plate
into 16mm socket. Compatible with 2915
Super Clamp and 484RC2 or 486RC2 Ball
Head for example......................................17.95
3294
2915
208Hex Head Mounting Plate (BO208HEX)
Same as 2934 Head Mounting Plate with a
3/8˝ thread Hex stud ................................21.95
C AM E R A S U P P O R T
MANFROT TO
433
TRIPOD ACCESSORIES
3287 Photo Clamp (BO3287)
Used to attach your camera to hard-to-get-to
places. Can be fixed to surfaces up to 2.3˝
thick. Has 2x 3/8˝ male threads for mounting
ball head and camera..............................29.50
3424 Column Clamp (BO3424)
Versatile clamp designed to work in
conjunction with removable tripod
columns of between .98˝ to 1.1˝
diameter, such as the 3001 and 3021 Series
tripods. It can be securely fixed to solid
surfaces or bars up to 2.1˝ width. The
column with head is inserted into the
clamp and locked in position at the
required height. The ideal accessory for
nature photography or support for
binoculars and scopes ........................67.95
3420 Telephoto
Lens Support
3430 Leg Protectors (BO3430)
Set of three leg protectors (14˝ long) with a
zip system so they can be easily fitted and
won’t slip down when in use. Offers good
grip. Protect the legs and insulate your hands
when using the tripods in cold weather. For
3011N, 3021N and 3021PRO .................31.95
3252 Super
Telephoto
Support
3431 Leg Protectors (BO3431)
Same as above except 10˝ long. Fits the
3001N, 3001D and 3001PRO tripods ....33.95
233B
Camera
Bracket
233B Camera Bracket (BO233B)
Camera flash bracket with telescopic column
from 11.8˝ to 17.7˝.................................56.95
3059 Accessory Side Arm (BO3059)
Mounts on any column with 3/8˝ thread,
this side arm allows positioning of two
heads at a 90° perpendicular to the tripod
column. 23˝ long. Chrome color.......53.95
3276 Table Mount Camera Support (BO3276)
A simple table mounting support with three
holes for fixing or clamping ...................45.95
3278B Macro Flash Bracket (BO3278B)
Allows two shoe mount flash heads to be
mounted with a camera onto a tripod head.
Attachments: 3/8˝and1/4-20˝ female threads
and 1/4-20˝ camera screw. Allows horizontal
or vertical camera position ....................49.95
337 Hot Shoe Two-Axis Bubble Level (BO337)
A double axis spirit level that mounts
effortlessly to the hot shoe of any standard
35mm SLR camera to help you achieve a
finer degree of accuracy in capturing
image content. Ideal during QTVR shooting
sessions....................................................35.95
3420 Telephoto Lens Support (BO3420)
Support for medium telephoto lens. The
length of the bracket is adjustable to take
different length lenses and different diameters
by tilting the included 3229 Tilt Head.
Length of the lens support is adjustable from
7.8 to 11.6˝. Attachments: 4 x 3/8˝ female
and 3 x 1/4-20˝ female ...........................64.95
3252 Super Telephoto Support (BO3252)
A very useful addition to any photographers
accessory bag. Complete with Super Clamp
2915 and Mini Ball Head 482. Fully
adjustable between 15.7˝ and 23.6˝ with a
simple telescopic locking device ............54.95
3253 Table Mount Geared Column
with Clamp (BO3253)
Geared column with clamp for table
thickness from 8-1.5˝, for supporting a
camera adjustable between 2˝ and 26˝.
Head not included............................137.95
3059B Accessory Side Arm (BO3059B)
Same as above in black color .............53.95
3153 Double Head Support (BO3153)
Similar to the 3059 with the addition of
two adjustable head mounts on the side
arm allowing the possible mounting of
four heads. 23” long. chrome.............79.95
3430 Leg Protectors
337 Hot Shoe Two-Axis
Bubble Level
3153B Double Head Support (BO3153B)
Same as above in black color .............84.95
3269 Double Camera
Support Platform (BO3269)
Measures 11 x 23⁄8˝. Designed to fit any
tripod head. Has 3/8˝ female socket.
Allows you to mount two cameras on a
single head. Supplied with two 1/4˝ and
two 3/8˝camera fixing screws............55.95
3295 Anti-Theft
Plate
3278B Macro Flash Bracket
3153 Double Head Support
Apron Support (BO3146)
Attaches to tripod legs and allows for
storage space beneath the center column.
It can also be used to hold a sandbag or
stones for extra support. Fits most
Manfrotto tripods ..............................28.95
3295 Anti-Theft Plate (BO3295)
For heads with hexagonal plates.
Key lock system for camera release.
78˝ steel cable. ....................................61.95
(212) 444-5027 • 1-800-947-9927 • Quick Dial 73
PHOTO - VIDEO - PRO AUDIO
434
C AM E R A S U P P O R T
MANFROT TO
TRIPOD ACCESSORIES
Levelling Center Columns
Tripod Feet
Rubber/Metal Spiked Feet
Reversible rubber/
metal spiked feet
supplied with a
dedicated fixing
tool.The spike is
made of a special
hard stainless steel
alloy extremely resistant to corrosion.
Retractable Spiked Feet (BO055SPK2): Set of 3,
for 3011N, 3021N and 3021PRO ............28.95
Retractable Spiked Feet (BO190SPK2): Set of 3,
for 3001N, 3001D and 3001PRO ............31.95
Retractable Spiked Feet (BO440SPK2): Set of 3
for 3444.....................................................32.95
Retractable Spiked Feet (BO441SPK2): Set of 3
for 3443.....................................................33.95
This innovative system means you can
quickly level your photo or video head
without needing to make time-consuming adjustments to the length and
angle of each single tripod leg. One of
the most common problems in still
photography and, above all, video has
been resolved by Manfrotto, thanks to
the use of a 50mm diameter leveling
half ball mounted at the top of a tripod center column so as to make the
angle of the top plate independent of
the rest of the tripod. Locking and unlocking of the half ball is via a turning
grip on the bottom of the center column. The half ball-mounting plate has a male 3/8˝ screw for
attachment to a photo or video head, and a bubble spirit level for added ease of use.
554 Leveling Center Column (BO554): Carbon fiber version for 3444 and 3443 tripods ........192.50
555B Leveling Center Column (BO555B): Aluminum version for 3021PRO tripod ................114.95
556B Leveling Center Column (BO556B): Aluminum version for 3001PRO tripod ................101.95
Short Columns
Suction Cup/Retractable Spike Feet
A rubber suction cup feet with retractable
stainless steel spike. The suction cup
increases the footprint of the tripod by
almost 20 times, giving much greater stability
when needed. The feet can be removed and
replaced at will.
To improve the positioning flexibility of your tripods,
shorter center columns are available as an accessory. If you
need to work with legs set at the third or fourth angle of
inclination (about 60°) but still require the possibility to
move the camera up and down to achieve perfect
adjustment for the shot, this shorter column replaces
the one supplied with the tripod.
Suction Cup Set (BO055SCK2): Set of 3, for
3011N, 3021N and 3021PRO ..................52.95
6.9˝ Short Column (BO055CCSB):
For 3011N, 3021N, 3021PRO tripods ...........................29.95
Suction Cup Set (BO190SCK2): Set of 3, for
3001N, 3001D and 3001PRO ..................52.95
6.5˝ Short Column (BO190CCSB):
For 3001N, 3001D, 3001PRO tripods ...........................29.95
Suction Cup Set (BO440SCK2):
Set of 3 for 3444 .......................................52.95
Suction Cup Set (BO441SCK2):
Set of 3 for 3443 .......................................52.95
All-Weather
Tripod Shoes
Retractable
Spiked Foot Adapter
Retractable Spiked Foot Adapter (BO055SPK):
Reversible rubber/metal spike feet (set of 3)
as accessory for tripods 3011N, 3021N,
3021PRO, 3001N, 3001D and 3001PRO.28.95
All-Weather Tripod Shoes (BO230):
Attach to tripod feet or monopods to provide
stability in snow, mud or soft ground. For
tripods 3011N, 3021N, 3021PRO, 3001N,
3001D and 3001PRO ...............................19.95
PHOTO - VIDEO - PRO AUDIO
6.5˝ Short Column (BO445CCS): For Carbon Fiber series tripods ...............................................49.50
3007KIT Tabletop Tripod Kit (BO3007K)
Small and portable, this kit fits into any camera
bag ready to give quick support to a lightweight
camera. The kit includes a 482 Mini Ball Head,
a 3007 TableTop Tripod, an extension and a
tripod pouch. The pouch easily attaches to
your belt and has a Velcro fold over flap to secure
the kits safely..................................................73.95
3504 Tool Kit (BO3504)
A set of tools to adjust the locking collars of
most Bogen/Manfrotto tripods, stands and
monopods. The kit includes a screwdriver and
a hexagonal tubular socket............................28.50
www.bhphotovideo.com
C AM E R A S U P P O R T
435
MANFROT TO
TRIPOD ACCESSORIS
Plates
Rapid Connect
Hexagonal Plate (BO3041)
With 1/4-20˝ flush
mount .....................17.50
Rapid Connect Adapter (BO625): Hexagonal plate adapter supplied with 1/4-20˝
and 3/8˝ camera fixing screws. Fixing 1/4-20˝ and 3/8˝ thread. Includes 3049
hexagonal plate. Equipped with two built-in spirit levels ................................49.95
Universal
Quick Release
Rapid Connect
Hexagonal Plate (BO3042)
Same as above except
with 3/8˝ screw.......17.50
Rapid Connect
Hexagonal Plate (BO3049)
For quick-release system.
Supplied with 1/4˝ camera screw .................17.95
Quick Release Adapters
Rapid Connect
Hexagonal Plate
Large Plate
Rapid Connect Hexagonal Plate (BO3048)
Same as above except with 3/8˝ screw ...............................17.50
Rapid Connect Hexagonal Plate (BO3267)
This plate provides proper alignment for 90° vertical
architectural shots with 35mm cameras. Supplied with
1/4˝-20 camera screw .........................................................21.95
Compact Rapid Connect
Adapter (BO3299): Rectangular
plate adapter supplied with
with 1/4-20˝ and 3/8˝ camera
fixing screws. Fixing 1/4-20˝
and 3/8˝ thread. Includes
3157M rectangular plate...26.95
Dove Tail Rapid Connect
Adapter (BO384): Supplied with
with 1/4-20˝ and 3/8˝ camera
fixing screws. Fixing 1/4-20˝
and 3/8˝ thread. Includes both
the Dove Tail Accessory Plate
and Architectual plates .....54.95
Universal
“Anti-Twist” Spotting Scope Plate
Compact Rapid
Connect Adapter
Dove Tail Rapid
Connect Adapter
Low Profile Rectangular Rapid Connect Adapter (BO394): Plate adapter supplied
with with 1/4-20˝ and 3/8˝ camera fixing screws. Fixing 1/4-20˝ and 3/8˝ thread.
Includes 3271 plate. Equipped with two built-in spirit levels ............39.95
Rapid Connect Hexagonal Plate (BO3267A)
Same as above except with 3/8˝ screw ...............................21.95
Universal Sliding Plate (BO3273): Supplied with with 1/4-20˝ and 3/8˝ camera
fixing screws. Fixing 1/4-20˝ and 3/8˝ thread. Includes 3272 sliding plate.....39.95
Rapid Connect Rectangular Plate
For quick-release system. Available with 1/4˝-20 camera screw
(BO3157N) or 3/8˝ screw (3157AN) .........................................11.95
Universal “Anti-Twist” Spotting Scope Plate (BO200USS): Eliminates unwanted
rotation of the spotting scope during viewing. It has a standard 1/4˝ screw, and
two grub set screws to lock the spotting scope securely in position ................59.95
Rapid Connect Architectual Rectangular Plate (BO3157NR)
Provides proper camera alignment for 90° vertical
architectural shots with 35mm cameras. Supplied with 1/4˝20 camera screw. .................................................................19.95
Adapters
Rapid Connect Architectual Rectangular Plate (3157ANR):
Same as above except with 3/8˝ screw ...............................19.50
Large Plate (BO3297)
Large 4x4˝ platform accept hexagonal quick-release plates.
Supplied with 1/4-20˝ and 3/8˝ screw...............................32.50
Universal Quick Release Rectangular Plate
for Hexagonal Quick Release Heads (BO030U)
Supplied with both 1/4-20˝ and 3/8˝ screw ....................26.9-5
Dove Tail Accessory Plate (BO384PL14)
Supplied with 1/4-20˝ screw ..............................................16.95
Dove Tail Architectural Plate (BO384PLA14)
Provides alignment for 90° shots with SLR cameras. Supplied
with 1/4˝-20 screw..............................................................19.95
Rapid Connect Mounting Plate (BO3271)
With 1/4-20˝ and 3/8˝ fixing screws .................................14.95
Rapid Connect Adapter Assembly
with Sliding Mounting Plate (BO577)
Supplied with 1/4-20˝ and 3/8˝ camera screws. Includes
3433PL slide plate ...............................................................52.95
2907 Camera Mounting Stud (BO2907):
Reversible stud with 3/8˝and 1/4˝. To mount cameras flush on
the 2915 Super Clamp ...........................................................2.99
3367 Small Adapter (BO3367):
Female 1/4-20˝ to male 3/8˝ adapter with flange ................6.95
3298 Nikon Flash Adapter (BO3298):
Converts Nikon flash mount to universal flash bracket ......6.95
3428 Survey Adapter (BO3428):
Converts tripod head screw from 3/8˝ threads to 5/8˝ .....33.50
3049LS Metz Flash Screw (BO3049LS):
A special long 1/4-20˝ camera screw used in conjunction
with the hexagonal 3049 camera plate which allows you to
fit the Metz flash bracket .......................................................7.95
3054 Converter Plate (BO3054): Converts tripod head screw
from 3/8˝ to 1/4-20˝. Allows any Manfrotto tripod to accept
heads with 1/4-20˝ socket. ..................................................14.95
3154 Joint for Arms (BO3154): Double female 3/8˝ adapter allows using accessory arms 3059 and 3153 as column
extensions.............................................................................17.50
2932 Flash Shoe (BO2932): Flash shoe with 1/4-20˝ male thread
attachment .............................................................................6.95
(212) 444-5027 • 1-800-947-9927 • Quick Dial 73
PHOTO - VIDEO - PRO AUDIO
436
C AM E R A S U P P O R T
MANFROT TO
TRIPOD BAGS & CARRYING SYSTEMS
A tripod is a wonderful thing.
Carrying one has never been
— until now. Manfrotto has
developed a complete range of
carrying and transportation
solutions designed around the
tripod. These contoured bags
are worked from the inside out to fit your kit. They offer convenient ways of setting up and breaking down faster, a “space pad”
that lets you shoulder carry your tripod without risking bangs and bruises, and an open backpack that keeps your hands free.
Whether you want a handle or strap that doesn’t have to be removed from your tripod when you set up a shoot, or whether you
need a protective shell to keep your tripod safe, Manfrotto has the solution. With innovative technical features, prime materials
and first class construction methods, the quality of their bags are up to the high standards you expect from Manfrotto.
PADDED TRIPOD BAGS
47.2˝ Padded Tripod Bag (BOMBAG120P)
A ballistic nylon asymmetric tapered
tripod bag that allows you to store
the tripod with the head attached.
The tripod legs fit comfortably in the
narrower end (7.87˝ diameter) and extra space is allowed for the head at the wider
end (9˝ diameter). A zip extends down the length of the bag, but also fully opens
the top end of the bag, making it easier to get to your tripod. Thermoform padding
holds the tripod in place and protects it, especially the head, during
transport. Inner pocket holds accessories where they won’t rattle around or get
damaged. This bag can be hand-carried horizontally by the side handle, vertically
by the end handle, or shoulder-carried using the included strap ......................124.95
39.3˝ Padded Tripod Bag (BOMBAG100P)
Same as MBAG120P, but slightly smaller ..109.95
35.4˝ Padded Tripod Bag (BOMBAG90P)
Same as MBAG120P, but smaller .................99.95
31.5˝ Padded Tripod Bag (BOMBAG80P)
Basically the same as MBAG120P, but smaller,
without the side handle or inner accessory
pocket. It is also narrower than the other padded
bags. The narrow end measures 5.1˝ diameter,
the wide end measures 5.9˝ ..........................74.95
All padded bags feature 1680 Denier water proof super nylon, and an end
handle. And with the exception of the 31.5˝ Padded Bag, they also feature
a central hande and an internal pocket that holds a video head pan bar.
End handle
Padded bag
Central pocket
Internal pocket
UNPADDED TRIPOD BAGS
31.5˝ Unpadded Tripod Bag (BOMBAG80)
This unpadded tripod bag is slightly tapered
to provide a better fit for your tripod with an
attached head. The wider end of the bag
accommodates the head without requiring all
levers to be removed. It also features a zipper
that extends down the length of the bag, but
also fully opens the top end of the bag. A logo end cap is padded to offer protection
to the tripod head. This bag includes a shoulder strap.........................................49.95
PHOTO - VIDEO - PRO AUDIO
www.bhphotovideo.com
27.5˝ Unpadded Tripod Bag (BOMBAG70)
Same as MBAG80, but slightly smaller at 27.5˝
in length ........................................................41.95
Mini Air Bag (BOMBAGD)
An unpadded rucksack-style bag for small
tripods. It has a bungee cord top opening and
adjustable straps, and comes in resistant nylon
with printed Manfrotto logo ........................15.95
C AM E R A S U P P O R T
437
MANFROT TO
TRIPOD BAGS & CARRYING SYSTEMS
Quick Action Strap
(BO401N)
A quick and easy accessory for carrying your tripod
when walking, hiking, cycling or just getting from
shoot to shoot. Use the shorter straps to fasten the
padded Quick Action Strap to one of the legs of your
tripod, bind the remaining legs together using the
longer adjustable quick release straps, sliding the
tripod over your shoulder and you’re ready to go, with
your hands free to grab those vital last minute items.
The padding helps hold the tripod in place and
protects your back from bruises and chaffing. The
Quick Action Strap even stays attached to your tripod
when shooting (all you need to do is release the longer
quick release straps so you can maneuver and
position all three legs), so you’re always ready to
capture the images you want, but also always ready to
move off again to the next location ........................49.95
Straps can be removed
and custom-positioned to
better match the size of
your tripod.
LONG STRAPS
SHORT STRAPS
Long Grey Strap (BO3044)
A basic 2˝ wide strap to carry your kit. A
spring clip fastens quickly to the steel
ring at the shoulder of the tripod, and a
closed loop goes around the feet of the
tripod, to grip them securely. It features
an adapter for compatibility with all
Manfrotto tripods and comfortable
rubberized fabric to avoid the tripod
slipping on your shoulder ...............29.95
Short Grey Strap (BO3044TSB)
An adjustable length 2˝ wide strap with
a single spring clip that attaches to the
steel ring at the shoulder of your tripod.
It features an adapter for compatibility
with all Manfrotto tripods. Comfortable
rubberized fabric keeps the tripod from
slipping on your shoulder ...............29.95
Short Green Strap (BO3044TSG)
Same as the above, but in green rubberized fabric to match the Manfrotto
3205GN3 and 3221GN3 tripods .....28.95
Short Black Strap (BO3044NAR)
A 1.5˝ wide adjustable strap supplied
with an adapter and a special spring
hook which makes attaching and
detaching the strap from the tripod
easy. It features a double-fixing system
whereby the hook attaches to the tripod
spider and loops around legs ..........29.95
Long Green Strap (BO102NAT)
Same as the above, but in green
rubberized fabric to match the 3205GN3
and 3221GN3 tripods ......................29.95
Apron Support (BO3146)
Attaches to the tripod legs and allows
for storage space beneath the center
column. It can also be used to hold a
sandbag or stones for extra support.
Fits most Manfrotto tripods.........28.95
Carbon One Series
Carrying Strap (BO3447)
Adjustable length strap for Carbon One
tripods. It is supplied with an adapter
and a spring hook to easily attach and
detach the strap. The strap has a single
fixing system, the hook attaches to the
tripod spider so that the tripod and head
hang down your body. 1.57˝ width,
black color ........................................29.50
(212) 444-5027 • 1-800-947-9927 • Quick Dial 73
PHOTO - VIDEO - PRO AUDIO
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising