ViewSonic | VA912b-1 | Service manual | ViewSonic VA912b-1 Service manual

ViewSonic VA912b-1 Service manual
Service Manual
ViewSonic VA912-4
VA912b-4
Model No. VS10867
19” Color TFT LCD Display
(VA912-4_VA912b-4_SM Rev. 1c Jun. 2006)
ViewSonic“ 381 Brea Canyon Road, Walnut, California 91789 USA - (800) 888-8583
Copyright
Copyright ¤ 2006 by ViewSonic Corporation. All rights reserved. No part of this publication may be
reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language or
computer language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical,
manual or otherwise, without the prior written permission of ViewSonic Corporation.
Disclaimer
ViewSonic makes no representations or warranties, either expressed or implied, with respect to the
contents hereof and specifically disclaims any warranty of merchantability or fitness for any particular
purpose. Further, ViewSonic reserves the right to revise this publication and to make changes from time
to time in the contents hereof without obligation of ViewSonic to notify any person of such revision or
changes.
Trademarks
Optiquest is a registered trademark of ViewSonic Corporation.
ViewSonic is a registered trademark of ViewSonic Corporation.
All other trademarks used within this document are the property of their respective owners.
Revision History
Revision
SM Editing Date
1a
11/09/05
Initial Release
1b
12/01/05
Add assembling, handling notice, packing, firmware documents
1c
06/06/06
ViewSonic Corporation
Description of Changes
ECR Number
VS-E060116
G. Han
Add panel source( Updated RSPL /BOM / EPL / PPL )
i
Editor
Confidential - Do Not Copy
Jamie Chang
J. Chang
VA912-4_VA912b-4
TABLE OF CONTENTS
1.
Precautions and Safety Notices
1
2.
Specification
5
3.
Front Panel Function Control Description
13
4.
Circuit Description
15
5.
Adjustment Procedure
26
6.
Troubleshooting Flow Chart
52
7.
Recommended Spare Parts List
55
8.
Exploded Diagram and Exploded Parts List
58
9.
Block Diagram
62
10. Schematic Diagrams
63
11. PCB Layout Diagrams
68
ViewSonic Corporation
ii
Confidential - Do Not Copy
VA912-4_VA912b-4
1. Precautions and Safety Notices
1. Appropriate Operation
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
(9)
(10)
Turn off the product before cleaning.
Use only a dry soft cloth when cleaning the LCD panel surface.
Use a soft cloth soaked with mild detergent to clean the display housing.
Use only a high quality, safety approved AC/DC power cord.
Disconnect the power plug from the AC outlet if the product will not be used for a long period of time.
If smoke, abnormal noise, or strange odor is present, immediately switch the LCD display off.
Do not touch the LCD panel surface with sharp or hard objects.
Do not place heavy objects on the LCD display, video cable, or power cord.
Do not use abrasive cleaners, waxes or solvents for your cleaning.
Do not operate the product under the following conditions:
- Extremely hot, cold or humid environment.
- Areas containing excessive dust and dirt.
- Near any appliance generating a strong magnetic field.
- In direct sunlight.
2. Caution
No modification of any circuit should be attempted. Service work should only be performed after you are thoroughly familiar
with all of the following safety checks and servicing guidelines.
3. Safety Check
Care should be taken while servicing this LCD display. Because of the high voltage used in the inverter circuit, the voltage is
exposed in such areas as the associated transformer circuits.
4. LCD Module Handling Precautions
4.1 Handling Precautions
(1) Since front polarizer is easily damaged, pay attention not to scratch it.
(2) Be sure to turn off power supply when connecting or disconnecting input connector.
(3) Wipe off water drops immediately. Long contact with water may cause discoloration or spots.
(4) When the panel surface is soiled, wipe it with absorbent cotton or other soft cloth.
(5) Since the panel is made of glass, it may break or crack if dropped or bumped on hard surface.
(6) Since CMOS LSI is used in this module, take care of static electricity and ensure human earth when handling.
(7) Do not open or modify the Module Assembly.
(8) Do not press the reflector sheet at the back of the module in any direction.
(9) In the event that a Module must be put back into the packing container slot after it was taken out of the
container, do not press the center of the CCFL Reflector edge. Instead, press at the far ends of the
CFL Reflector edge softly. Otherwise the TFT Module may be damaged.
(10) At the insertion or removal of the Signal Interface Connector, be sure not to rotate or tilt the Interface
Connector of the TFT Module.
ViewSonic Corporation
1
Confidential - Do Not Copy
VA912-4_VA912b-4
(11) After installation of the TFT Module into an enclosure (LCD monitor housing, for example), do not twist or
bend the TFT Module even momentarily. When designing the enclosure, it should be taken into consideration
that no bending/twisting forces may be applied to the TFT Module from outside. Otherwise the TFT Module
may be damaged.
(12) The cold cathode fluorescent lamp in the LCD contains a small amount of mercury. Please follow local
ordinances or regulations for disposal.
(13) The LCD module contains a small amount of materials having no flammability grade. The LCD module
should be supplied with power that complies with the requirements of Limited Power Source
(IEC60950 or UL1950), or an exemption should be applied for.
(14) The LCD module is designed so that the CCFL in it is supplied by a Limited Current Circuit (IEC60950
or UL1950). Do not connect the CCFL to a Hazardous Voltage Circuit.
ViewSonic Corporation
2
Confidential - Do Not Copy
VA912-4_VA912b-4
VA912-4 series handling Notice
Correct Method
Incorrect method
Correct Method
Incorrect method
Correct Method
Incorrect method
ViewSonic Corporation
3
Confidential - Do Not Copy
VA912-4_VA912b-4
Correct Method
Incorrect method
Correct Method
Incorrect method
ViewSonic Corporation
4
Confidential - Do Not Copy
VA912-4_VA912b-4
2. Specification
PRODUCT DEFINITION AND SPECIFICATION
Region
VSA
VSAP
VSE
VSCN
(M)
(A)/(S)/(K)
(E)/(U)
(G)
Product Name
VA912/b-4 / VA912-4U
Model Number
VS10867
OSD Languages
TFT LCD Panel and Model #
Scalar
English, French, German, Italian, Spanish,
Finnish, Japanese, Traditional Chinese,
Simplified Chinese
Vendor : HSD,
Model # : 190ME13 A02 / A03
Vendor : HSD,
Model # : 190ME13 A12 / A16
Model # : RTD 2523b
Input Signal
Analog / Digital
Sync Compatibility
Separate
Audio
1W x 2
a. Refer to Appendix D
Power Cable
b. U model: (2 power cables are required)
1. Schuko CEE7-7 Type Plug
2. Separate 3-prong BS 1363 Type Plug
Analog Cable (1.8 m, color : black), with PC 2001 and
YES
Hot Plug Detect &DDC
YES
Audio Cable (1.8m, Color: black) with PC 2001
DVI Cable(1.8m, color: black) with PC 2001
Yes
Yes
No
Yes
ViewSonic CD Wizard
Arabic, English, Finnish, Spanish, German,
ViewSonic Quick Start Guide
Russian, French, Simplified Chinese, Traditional
Italian, Swedish, Polish, Korean, Portuguese,
Chinese, Hungary, Czech, Turkish
Screen Protector Mylar
YES
YES
YES
YES
Warranty Sticker
NO
NO
NO
YES
Warranty Card
NO
NO
NO
YES
Carton Sticker
NO
NO
NO
YES
PE bag of Carton
NO
NO
NO
YES
ViewSonic Corporation
5
Confidential - Do Not Copy
VA912-4_VA912b-4
GENERAL SPECIFICATION
Test Resolution & Frequency
1280x1024 @ 60Hz
Test Image Size
Full Size
Contrast and Brightness Controls
Factory Default:
Contrast = 70%, Brightness = 100%
VIDEO INTERFACE
Analog Input Connector
DB-15 (Analog), refer the appendix A
Digital Input Connector
DVI-I (digital)
Default Input Connector
Defaults to the first detected input
Video Cable Strain Relief
Equal to twice the weight of the monitor for
five minutes
Video Cable Connector DB-15 Pin out
Compliant DDC 2B
Video Signals
1. Video RGB (Analog)
2. DVI (Digital)
Separate
Video Impedance
75 Ohms (Analog)
Maximum PC Video Signal
950 mV with no damage to monitor
Maximum Mac Video Signal
1250 mV with no damage to monitor
Sync Signals
LVDS
DDC 2B
Compliant with Revision 1.3
Sync Compatibility
Separate Sync
Video Compatibility
Shall be compatible with all PC type
computers, Macintosh computers, and after
market video cards
Resolution Compatibility
640 x 350*, 640 x 480, 720 x 400* (640 x
400*), 800 x 600, 832 x 624, 1024 x 768,
1152 x 870, 1280 x 720, 1280 x 960, 1280 x
1024
* The image vertical size might not be full screen.
But the image vertical position should be at the center.
Exclusions
ViewSonic Corporation
Not compatible with interlaced video
6
Confidential - Do Not Copy
VA912-4_VA912b-4
POWER SUPPLY
Power Supply (Adapter)
Input Voltage Range
Input Frequency Range
Short Circuit Protection
Over Current Protection
Leakage Current
EFFICIENCY
Fuse
Power Dissipation
Max Input AC Current
INRUSH CURRENT (COLD START)
Power Supply Cold Start
Power Supply Transient Immunity
Power Supply Line Surge Immunity
Power Supply Missing Cycle Immunity
Power Supply Acoustics
US Type Power Cable
European Type Power Cable
CCC Type Power Cable
PSE Type Power Cable
Power Saving Operation(Method)
Power Consumption
Recovery Time
ViewSonic Corporation
FSP043-2PI01
90 TO 264 VAC
47 TO 63 HERTZ
Output can be shorted without damage
5.13 A typical at 18.1 VDC
0.25mA (Max) at 264VAC / 50Hz
80 % typical at 115VAC Full Load
Internal and not user replaceable
36 Watts (max)
1.8Arms @ 90VAC,
100 A @ 240VAC , 50Hz
Shall start and function properly when under
full load, with all combinations of input
voltage, input frequency, and operating
temperature
Shall be able to withstand an EN61000-4-4
±2KV transient test with no damage
Shall be able to withstand ±2KV (L-L) and
±2.3KV (L-PE) with no damage
Shall be able to function properly, without
reset or visible screen artifacts, when ½
cycle of AC power is randomly missing at
nominal input
The power supply shall not produce audible
noise that would be detectable by the user.
Audible shall defined to be in compliance
with ISO 7779 (DIN EN27779:1991) Noise
measurements of machines acoustics.
Power Switch noise shall not be considered
Separate 3-prong NEMA 5-15P type plug.
Length = 1.8m. Connects to display.
Color = Black
Schuko CEE7-7 type plug.
Length = 1.8m, Connects to display.
Color = Black
Separate 3-prong type plug.
Length = 1.8m. Connects to display.
Color = Black
Separate 2-prong NEMA 1-15P type plug.
Length = 1.8m. Connects to display.
Color = Black
VESA DPMS Signaling
ON Mode < 36 W (max)
ACTIVE OFF < 1 W
ON MODE = N/A, ACTIVE OFF < 5 SEC
7
Confidential - Do Not Copy
VA912-4_VA912b-4
ELECTRICAL REQUIREMENT
Horizontal / Vertical Frequency
Horizontal Frequency
30 – 82 KHZ
Vertical Refresh Rate
50 – 85* HZ.
Maximum Pixel Clock
135 MHz
Sync Polarity
Independent of sync polarity.
TIMING TABLE
Item
Timing
1
640 x 350 @ 70Hz, 31.5kHz
2
640 x 400 @ 60Hz, 31.5kHz
3
640 x 400 @ 70Hz, 31.5kHz
4
640 x 480 @ 60Hz, 31.5kHz
5
640 x 480 @ 67Hz, 35.0kHz
6
640 x 480 @ 72Hz, 37.9kHz
7
640 x 480 @ 75Hz, 37.5kHz
8
640 x 480 @ 85Hz, 43.27kHz
9
720 x 400 @ 70Hz, 31.5kHz
10
800 x 600 @ 56Hz, 35.1kHz
11
800 x 600 @ 60Hz, 37.9kHz
12
800 x 600 @ 75Hz, 46.9kHz
13
800 x 600 @ 72Hz, 48.1kHz
14
800 x 600 @ 85Hz, 53.7kHz
15
832 x 624 @ 75Hz, 49.7kHz
16
1024 x 768 @ 60Hz, 48.4kHz
17
1024 x 768 @ 70Hz, 56.5kHz
18
1024 x 768 @ 72Hz, 58.1kHz
19
1024 x 768 @ 75Hz, 60.0kHz
20
1024 x 768 @ 85Hz, 68.67kHz
21
1152 x 870 @ 75Hz, 68.7kHz
22
1280 x 1024 @ 60Hz, 63.4kHz
23
1280 x 1024 @ 75Hz, 79.97kHz
24
1280x 720 @ 60Hz, 45kHz (HDTV)
Primary Presets
1280x1024 @ 60Hz
Analog
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Digital
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
User Presets
Number of User Presets (recognized timings) Available: 10 presets total in FIFO
configuration
Changing Modes
l Maximum Mode Change Blank Time for image stability : 3 seconds (Max), excluding
“Auto Adjust” time
l Under DOS mode (640 x 350, 720 x 400 & 640 x 400), there is no “Auto Adjust”
feature.
l The monitor needs to do “A uto Adjust” the first time a new mode is detected but except
the DOS mode 640 x 350, 720 x 400 & 640 x 400.(see section “0-Touch™ Function
Actions”)
l While running Change Mode, Auto Adjust or Memory Recall, the image shall blank
ViewSonic Corporation
8
Confidential - Do Not Copy
VA912-4_VA912b-4
FRONT PANEL CONTROLS AND INDICATORS
Front Panel Hardware Controls
Power Switch (Front Head)
Power Control, soft Power Switch.
Power LED (Front Head)
Green – ON
Orange – Active Off
Dark = Soft Power Switch OFF
Front Panel Controls (Head)
[XX] [ 1 ] [? ] [? ] [ 2 ] [ ]
[ ] Power
[ 1 ] Button 1
[ 2 ] Button 2
[? ] Up arrow button
[? ] Down arrow button
[X X] MUTE
Note: Power Button, Button 1 and Button 2
and Mute Button must be one-shot logic
operation. (i.e. there should be no cycling)
Reaction Time
OSD must fully appear within 0.5s after
pushing Button 1
Panel Source Identify
(1) ID label - The panel code “T” for HSD panel should be shown on the lower right side
of ID label. (See Figure 2)
(2) UPC label - The panel code “T” for HSD panel should be shown on the lower right
side of UPC label. (See Figure 3)
ViewSonic Corporation
9
Confidential - Do Not Copy
VA912-4_VA912b-4
Panel Characteristics:
1st Panel Source
Model number
HSD 190ME13-A02 / A03
Type
TN type with LVDS interface
Active Size
376.32 (H) x 301.056 (V)
Pixel Arrangement
RGB Vertical Stripe
Pixel Pitch
0.294 mm
GLASS TREATMENT
Anti Glare (Hard coating 3H)
# OF BACKLIGHTS
4 CCFL direct
BACKLIGHT LIFE
40,000 Hours (min)
Luminance (Center) –
Condition:
CT = 6500K, Contrast = Max,
Brightness = Max
250 cd/m2 (Typ after 30 minute warm up)
200 cd/m2 (Min after 30 minute warm up)
light
Brightness Uniformity (9 Points)
U = 80% (typ), 75% (Min).
U = Min Luminance in 5 points / Max
Luminance in 5 points
Contrast Ratio
600 (typ), 450 (min)
Color Depth
16 million colors (6 bit + 2 bit FRC)
Viewing Angle (Horizontal)
@ CR>10
Typical:
140
Minimum: 120
@ CR>5
Typical:
Minimum:
160
140
VIEWING ANGLE (VERTICAL)
@ CR>10
Typical:
130
Minimum: 110
@ CR>5
Typical:
Minimum:
150
130
Response Time
10%-90% @ Ta=25°C
8ms (Tr= 2 ms, Tf = 6 ms) (typ)
20 ms (Tr= 7 ms, Tf = 13 ms) (max)
Panel Defects
Please see Panel Quality Specifications.
ViewSonic Corporation
10
Confidential - Do Not Copy
VA912-4_VA912b-4
2nd Panel Source
Model number
HSD 190ME13-A12 / A16
Type
TN type with LVDS interface
Active Size
376.32 (H) x 301.056 (V)
Pixel Arrangement
RGB Vertical Stripe
Pixel Pitch
0.294 mm
GLASS TREATMENT
Anti Glare (Hard coating 3H)
# OF BACKLIGHTS
4 CCFL direct
BACKLIGHT LIFE
50,000 Hours (min)
Luminance (Center) –
Condition:
CT = 6500K, Contrast = Max,
Brightness = Max
300 cd/m2 (Typ after 30 minute warm up)
240 cd/m2 (Min after 30 minute warm up)
light
Brightness Uniformity (9 Points)
U = 70% (Min).
U = Min Luminance in 5 points / Max
Luminance in 5 points
Contrast Ratio
700 (typ), 450 (min)
Color Depth
16 million colors (6 bit + 2 bit FRC)
Viewing Angle (Horizontal)
@ CR>10
Typical:
150
Minimum: 130
@ CR>5
Typical:
160
Minimum: TBC
VIEWING ANGLE (VERTICAL)
@ CR>10
Typical:
135
Minimum: 115
@ CR>5
Typical:
155
Minimum: TBC
Response Time
10%-90% @ Ta=25°C
8ms (Tr= 2 ms, Tf = 6 ms) (typ)
12 ms (Tr= 4 ms, Tf = 8 ms) (max)
Panel Defects
Please see Panel Quality Specifications.
ViewSonic Corporation
11
Confidential - Do Not Copy
VA912-4_VA912b-4
MECHANICAL
Dimension (Desktop)
Width
437 mm (17.2 inch)
Height
419 mm (16.5 inch)
Depth
216 mm (8.5 inch)
Monitor Weight
4.7 Kg/ 10.4 lbs
*Refer to Figure 1
Ergonomics
Tilt Up
≧ 20 º to 18°
Tilt Down
≦ -5 º to -3°
Vibration Test
● Vibration Frequency : 2 – 200 Hz
● Acceleration : 1.14 G RMS
● Sweep Time : 1 oct. / min
● Test Time : 60 min per axis, total 3 axis / 6 main face
● Vibration Test Data shall be submitted for approval to ViewSonic before Mass
Production
Drop Test (100G)
● Weak Corner : 76.2 cm
● Six Faces : 76.2 cm
● 3 Edges Radiating From Weak Corner : 76.2 cm
● Drop Test Data shall be submitted for approval to ViewSonic before Mass Production
ENVIRONMENTAL
● Operating Temperature : 5°C to +35°C
●
●
●
●
●
Storage Temperature : -20°C to +55°C
Operating Relative Humidity : 20% to 80% RH Non-Condensing
Storage Relative Humidity : 20% to 85% RH Non-Condensing
Operating Altitude : 0 to +3,000 meters
Storage Altitude : 0 to +12,000 meters
ViewSonic Corporation
12
Confidential - Do Not Copy
VA912-4_VA912b-4
3. Front Panel Function Control Description
ViewSonic Corporation
13
Confidential - Do Not Copy
VA912-4_VA912b-4
ViewSonic VA921-4/VA921b-4/VA912-4U
Main Menu Controls
Adjust the menu items shown below by using the up and down buttons.
A. Auto Image Adjust automatically sizes, centers, and fine tunes the video signal to eliminate waviness and distortion.
Press the [2] button to obtain a sharper image.
NOTE: Auto Image Adjust works with most common video cards. If this function does not work on your LCD
display,
then lower the video refresh rate to 60 Hz and set the resolution to its pre-set value.
B. Contrast adjusts the difference between the image background (black level) and the foreground (white level).
C. Brightness adjusts the lamps current to control the screen brightness.
D. Input adjusts the Analogue or the Digital input source
E. Audio Adjust the volume increase or decrease and mute function
F.
Color Adjust provides several color options: preset color temperatures and Custom User Color which allows you to
adjust red (R), green (G), and blue (B). The factory setting for this product is 6500K (6500° Kelvin).
9300K — Adds blue to the screen image for cooler white (used in most office settings with fluorescent lighting).
5400K — Adds red to the screen image for warmer white and richer red.
Custom User Color — Individual adjustments for red, green, and blue.
1 To select color (R, G or B) press button [2].
2 To adjust selected color, press
▲ or ▼ .
3 When you are finished making all color adjustments, press button [1] twice.
G. Information displays the timing mode (video signal input) coming from the graphics card in your computer. See your
graphic card’s user guide for instructions on changing the resolution and refresh rate (vertical frequency). VESA 1280
x 1024 @ 60 Hz (recommended) means that the resolution is 1280 x 1024 and the refresh rate is 60 Hertz.
H. Manual Image Adjust controls are explained below:
H. Size (Horizontal Size) adjusts the width of the screen image.
NOTE: Vertical size is automatic with your LCD display.
H./V. Position adjusts horizontal and vertical position of the screen image. You can toggle between Horizontal and
Vertical by pressing button [2]. Horizontal moves the screen image to the left or to the right. Vertical moves the screen
image up and down.
Fine Tune sharpens focus by aligning the illuminated text and/or graphic characters.
Sharpness adjusts the clarity and focus of the screen image.
Setup Menu controls are explained below:
Language allows you to choose the language used in the menus and control screens.
Resolution Notice displays the recommended resolution for this LCD display.
Enable allows the Resolution Notice to appear on-screen.
Disable will not allow the Resolution Notice to appear on-screen.
OSD Timeout sets the length of time an on-screen display screen is displayed. For example,
with a“15 second”
setting, if a control is not pushed within 15 seconds, the display OSD disappears.
I.
OSD Position allows you to move the on-screen display menus and control screens.
J.
Memory Recall returns adjustments to the original factory settings if the display is operating in a factory Preset
Timing Mode listed in this user guide.
ViewSonic Corporation
14
Confidential - Do Not Copy
VA912-4_VA912b-4
4. Circuit Description
1.
Outline
1.1 Power On/Off, up arrow- button, down arrow button, (1) MENU button, (2) Enter button, Mute button on
the front panel.
1.2 D-sub 15pin connector, DVI-D connector, audio line-in receptacle, and AC-IN are located on the back side
of the cabinet.
1.3 OSD menu includes the following function;
Auto Image Adjust (only active under analog input)
Contrast/Brightness
Input Select
Audio Adjust
Color Adjust
Information
Manual Image Adjust
Setup Menu
Memory Recall
1.4 Contrast and Brightness can be directly controlled with UP / DOWN key.
1.5
Audio volume can be controlled with up key and down key when Audio Adjust menu is active.
1.6
Pushing Mute key can disable audio output.
2.
CONNECTORS
2.1 AC inlet : CEE22 typed connector
2.2 Audio : Line-in,
CN9
1
5
4
3
2
Line-in receptacle
(Line-in receptacle is green)
1
6
2
7
3
8
4
9
5
10
2.3 Video signal connector for analog input: 15P Mini D-Sub
CN6
DB15HD
16
ViewSonic Corporation
15
14
13
12
11
17
PIN
MNEMONI
SIGNAL
1
RV
Red Video
2
GV
Green Video
3
BV
Blue Video
4
NC
None
5
GND
Ground (DDC return)
6
RG
Red GND
7
GG
Green GND
8
BG
Blue GND
9
+5V
+5V (for DDC)
10
SG
Sync GND
11
NC
None
12
SDA
DDC Data
13
HS
Horizontal Sync
14
VS
Vertical Sync
15
SCL
DDC Clock
15
Confidential - Do Not Copy
VA912-4_VA912b-4
2.4
Video signal connector for digital input: 24pin DVI-D connector
CN9
RX2RX2+
GND
RX4RX4+
SCL
SDA
VS
RX1RX1+
GND
RX3RX3+
5V
GND
HP
RX0RX0+
GND
RX5RX5+
GND
RXC+
RXC-
Pin No.
3.
RX2-
TMDS negative differential input, channel 2
2
RX2+
TMDS positive differential input, channel 2
3
GND
Logic Ground
4
RX4-
Reserved. No connection
5
RX4+
Reserved. No connection
6
SCL
DDC2B Clock
7
SDA
DDC2B Data
8
VS
Reserved. No connection
9
RX1-
TMDS negative differential input, channel 1
10
RX1+
TMDS positive differential input, channel 1
11
GND
Logic Ground
12
RX3-
Reserved. No connection
13
RX3+
Reserved. No connection
14
+5V
Power
15
GND
Logic Ground
16
HP
SENSE Pin, Pull High
17
RX0-
TMDS negative differential input, channel 0
18
RX0+
TMDS positive differential input, channel 0
19
GND
Logic Ground
20
RX5-
Reserved. No connection
21
RX5+
Reserved. No connection
22
GND
Logic Ground
23
RXC+
TMDS positive differential input, reference clock
24
RXC-
TMDS negative differential input, reference clock
9
10
11
12
13
14
15
16
DVI-D
Description
1
1
2
3
4
5
6
7
8
17
18
19
20
21
22
23
24
Signal Name
ELECTRICAL SPECIFICATIONS
3.1 Standard conditions
Display Area
376.32 x 301.056 mm
Video Signal
0.7Vpp
Contrast
Default
Brightness
Default
Ambient
20 +/- 5 °C
Input
AC
Warming up
> 30 min
Display
1280 x 1024
ViewSonic Corporation
16
Confidential - Do Not Copy
VA912-4_VA912b-4
3.2 POWER
3.2.1
Power supply
Input voltage
100~240Vac
Power frequency
50~60Hz
Input current
3.2.2
<1.8Arms@90Vac
Inrush current
100A(Max) at 90Vac(cold start)
Power consumption
36W(typical);40Watts(Max)
Power Management
State
Power
Indicator
On
36Watts
Blue
Standby
< 1Watts
Amber
Off
<1Watts
Off
3.3 Acceptable timing
If the timing is within following specification, this LCD display can automatically function with a certain
position.
Horizontal: Sync frequency: 30~82 kHz
Vertical: Sync frequency: 50~85*Hz
3.4 Signal level and input impedance
3.4.1
3.4.2
Video Signal level: 0.7Vp-p Video signal.
Sync Signal level
H/V Separate: TTL level
3.4.3
Input impedance
Analog video input: 75 ohm
Digital video input: 100 ohm
Sync input: > 1 k ohm
Audio input: 10K ohm
4. SIGNAL CABLE: Signal cable with Mini D-Sub 15P connectors at both ends.
ViewSonic Corporation
17
Length: 1.8 meter.
Confidential - Do Not Copy
VA912-4_VA912b-4
5. EDID data
5.1. Analog EDID: Analog EDID is stored in U8.
Time:
Date:
15:03:33
Fri Aug 05, 2005
______________________________________________________________________
______________________________________________________________________
VIEWSONIC CORPORATION
EDID Version # 1,
Revision # 3
DDCTest For: ViewSonic VA912-4SERIES
______________________________________________________________________
______________________________________________________________________
EDID Block 0, Bytes 0-127
128 BYTES OF EDID CODE:
0
1
2
3
4
5
6
7
8
9
________________________________________
0
| 00
FF
FF
FF
FF
FF
FF
00
10
| 1C
72
00
00
00
00
01
20
| 08
26
1E
78
2E
FD
56 A5
53
4A
30
| 9D
24
14
4F
54
BF
EF
81
80
40
| 81
40
71
4F
61
59
45
59
31
59
50
| 01
01
01
01
30
2A 00
98
51
00
60
| 2A 40
30
70
13
00
78
2D
11
00
70
| 00
1E
00
00
00
FF
00
50
57
38
80
| 30
35
30
31
30
30
30
30
31
0A
0F
5A 63
01
80
03
90
| 00
00
00
FD
00
32
55
1E
52
0E
100
| 00
0A 20
20
20
20
20
20
00
00
110
| 00
FC
00
56
41
39
31
32
2D
34
120
| 53
45
52
49
45
53
00
18
______________________________________________________________________
(08-09)
ID Manufacturer Name ________________
= VSC
(11-10)
Product ID Code _____________________
= 721C
(12-15)
Last 5 Digits of Serial Number ______
(16)
Week of Manufacture _________________
= 01
(17)
Year of Manufacture _________________
= 2005
(10-17)
Complete Serial Number ______________
= See Descriptor Block
(18)
EDID Version Number _________________
=1
(19)
EDID Revision Number ________________
=3
(20)
VIDEO INPUT DEFINITION:
= Not Used
Analog Signal
0.700, 0.300 (1.000 Vp-p)
Separate Syncs
(21)
Maximum Horizontal Image Size ________________
=
380 mm
(22)
Maximum Vertical Image Size __________________
=
300 mm
(23)
Display Gamma ________________________________
(24)
Power Management and Supported Feature(s):
=
2.20
Active Off/Very Low Power, Standard Default Color Space,
ViewSonic Corporation
18
Confidential - Do Not Copy
VA912-4_VA912b-4
Preferred Timing Mode
Display Type = R/G/B Color
(25-34)
CHROMA INFO:
Red X - 0.647 Green X - 0.292 Blue X - 0.142 White X - 0.310
Red Y - 0.327 Green Y - 0.614 Blue Y - 0.079 White Y - 0.330
(35)
ESTABLISHED TIMING I:
720 X 400 @ 70Hz (IBM,VGA)
640 X 480 @ 60Hz (IBM,VGA)
640 X 480 @ 67Hz (Apple,Mac II)
640 X 480 @ 72Hz (VESA)
640 X 480 @ 75Hz (VESA)
800 X 600 @ 56Hz (VESA)
800 X 600 @ 60Hz (VESA)
(36)
ESTABLISHED TIMING II:
800 X 600 @ 72Hz (VESA)
800 X 600 @ 75Hz (VESA)
832 X 624 @ 75Hz (Apple,Mac II)
1024 X 768 @ 60Hz (VESA)
1024 X 768 @ 70Hz (VESA)
1024 X 768 @ 75Hz (VESA)
1280 X 1024 @ 75Hz (VESA)
(37)
Manufacturer's Reserved Timing:
1152 X 870 @ 75Hz (Apple,Mac II)
(38-53)
Standard Timing Identification:
1280 X 1024 @60Hz
1280 X 960 @60Hz
1152 X 864 @75Hz
1024 X 768 @85Hz
800 X 600 @85Hz
640 X 480 @85Hz
Not Used
Not Used
______________________________________________________________________
(54-71) Detailed Timing / Descriptor Block 1:
1280x1024
Pixel Clock: 108.00 MHz
______________________________________________________________________
Horizontal Image Size: 376 mm
Vertical Image Size: 301 mm
Refreshed Mode: Non-Interlaced
Normal Display - No Stereo
Horizontal:
Active Time: 1280 pixels
Blanking Time: 408 pixels
Sync Offset: 48 pixels
Sync Pulse Width: 112 pixels
Border: 0 pixels
Frequency: 63.98 KHz
Vertical:
Active Time: 1024 lines
Blanking Time: 42 lines
Sync Offset: 1 lines
Sync Pulse Width: 3 lines
ViewSonic Corporation
19
Confidential - Do Not Copy
VA912-4_VA912b-4
Border: 0 lines
Frequency: 60.02 Hz
Digital Separate, Horizontal Polarity (+) Vertical Polarity (+)
______________________________________________________________________
(72-89) Detailed Timing / Descriptor Block 2:
Monitor Serial Number:
PW8050100001
______________________________________________________________________
(90-107) Detailed Timing / Descriptor Block 3:
Monitor Range Limits:
Min Vertical Freq - 50 Hz
Max Vertical Freq - 85 Hz
Min Horiz. Freq - 30 KHz
Max Horiz. Freq - 82 KHz
Pixel Clock
- 140 MHz
Secondary GTF - Not Supported
______________________________________________________________________
(108-125) Detailed Timing / Descriptor Block 4:
Monitor Name:
VA912-4SERIES
(126)
No Extension EDID Block(s)
(127)
CheckSum OK
5.2. Digital EDID: Digital EDID is stored in U5.
Time:
Date:
15:02:23
Fri Aug 05, 2005
______________________________________________________________________
______________________________________________________________________
VIEWSONIC CORPORATION
EDID Version # 1,
Revision # 3
DDCTest For: ViewSonic VA912-4SERIES
______________________________________________________________________
______________________________________________________________________
EDID Block 0, Bytes 0-127
128 BYTES OF EDID CODE:
ViewSonic Corporation
20
Confidential - Do Not Copy
VA912-4_VA912b-4
0
1
2
3
4
5
6
7
8
9
________________________________________
0
| 00
FF
FF
FF
FF
FF
FF
00
10
| 1C
72
00
00
00
00
01
0F
20
| 80
26
1E
78
2E
FD
56
A5
30
| 9D
24
14
4F
54
BF
40
| 81
40
71
4F
61
59
45
59
31
59
50
| 31
0A
01
01
30
2A
00
98
51
00
60
| 2A
40
30
70
13
00
78
2D
11
00
70
| 00
1E
00
00
00
FF
00
50
57
38
80
| 30
35
30
31
30
30
30
30
31
0A
90
| 00
00
00
FD
00
32
55
1E
52
0E
100
| 00
0A
20
20
20
20
20
20
00
00
110
| 00
FC
00
56
41
39
31
32
2D
34
120
| 53
45
52
49
45
53
00
67
EF
5A
63
01
03
53
80
4A
81
80
______________________________________________________________________
(08-09)
ID Manufacturer Name ________________
= VSC
(11-10)
Product ID Code _____________________
= 721C
(12-15)
Last 5 Digits of Serial Number ______
(16)
Week of Manufacture _________________
= 01
(17)
Year of Manufacture _________________
= 2005
(10-17)
Complete Serial Number ______________
= See Descriptor Block
(18)
EDID Version Number _________________
=1
(19)
EDID Revision Number ________________
=3
(20)
VIDEO INPUT DEFINITION:
= Not Used
Digital Signal
Non - VESA DFP 1.x Compatible
(21)
Maximum Horizontal Image Size ________________
=
380 mm
(22)
Maximum Vertical Image Size __________________
=
300 mm
(23)
Display Gamma ________________________________
(24)
Power Management and Supported Feature(s):
=
2.20
Active Off/Very Low Power, Standard Default Color Space,
Preferred Timing Mode
Display Type = R/G/B Color
(25-34)
CHROMA INFO:
Red X - 0.647 Green X - 0.292 Blue X - 0.142 White X - 0.310
Red Y - 0.327 Green Y - 0.614 Blue Y - 0.079 White Y - 0.330
(35)
ESTABLISHED TIMING I:
720 X 400 @ 70Hz (IBM,VGA)
640 X 480 @ 60Hz (IBM,VGA)
640 X 480 @ 67Hz (Apple,Mac II)
640 X 480 @ 72Hz (VESA)
640 X 480 @ 75Hz (VESA)
800 X 600 @ 56Hz (VESA)
800 X 600 @ 60Hz (VESA)
(36)
ESTABLISHED TIMING II:
ViewSonic Corporation
21
Confidential - Do Not Copy
VA912-4_VA912b-4
800 X 600 @ 72Hz (VESA)
800 X 600 @ 75Hz (VESA)
832 X 624 @ 75Hz (Apple,Mac II)
1024 X 768 @ 60Hz (VESA)
1024 X 768 @ 70Hz (VESA)
1024 X 768 @ 75Hz (VESA)
1280 X 1024 @ 75Hz (VESA)
(37)
Manufacturer's Reserved Timing:
1152 X 870 @ 75Hz (Apple,Mac II)
(38-53)
Standard Timing Identification:
1280 X 1024 @60Hz
1280 X 960 @60Hz
1152 X 864 @75Hz
1024 X 768 @85Hz
800 X 600 @85Hz
640 X 480 @85Hz
640 X 400 @70Hz
Not Used
______________________________________________________________________
(54-71) Detailed Timing / Descriptor Block 1:
1280x1024
Pixel Clock: 108.00 MHz
______________________________________________________________________
Horizontal Image Size: 376 mm
Vertical Image Size: 301 mm
Refreshed Mode: Non-Interlaced
Normal Display - No Stereo
Horizontal:
Active Time: 1280 pixels
Blanking Time: 408 pixels
Sync Offset: 48 pixels
Sync Pulse Width: 112 pixels
Border: 0 pixels
Frequency: 63.98 KHz
Active Time: 1024 lines
Blanking Time: 42 lines
Sync Offset: 1 lines
Sync Pulse Width: 3 lines
Vertical:
Border: 0 lines
Frequency: 60.02 Hz
Digital Separate, Horizontal Polarity (+) Vertical Polarity (+)
______________________________________________________________________
(72-89) Detailed Timing / Descriptor Block 2:
Monitor Serial Number:
PW8050100001
______________________________________________________________________
(90-107) Detailed Timing / Descriptor Block 3:
ViewSonic Corporation
22
Confidential - Do Not Copy
VA912-4_VA912b-4
Monitor Range Limits:
Min Vertical Freq - 50 Hz
Max Vertical Freq - 85 Hz
Min Horiz. Freq - 30 KHz
Max Horiz. Freq - 82 KHz
Pixel Clock
- 140 MHz
Secondary GTF - Not Supported
______________________________________________________________________
(108-125) Detailed Timing / Descriptor Block 4:
Monitor Name:
VA912-4SERIES
(126)
No Extension EDID Block(s)
(127)
CheckSum OK
6. THEORY OF OPERATION
This section describes the function of the LCD monitor per functional block.
This monitor includes MB board, power/inverter board and button board.
6.1 MB BOARD
The MB board is a two-layer, single-landed. 5V and 12V DC power from the power adapter enters the board
through connector CN1. Other connectors on the board are for audio and button board .The VGA cable is a signal
cable that contains video signal, sync signal and DDC signal from PC VGA adapter. This system board consists of
4 functional areas: flat panel controller, flash ROM, power regulator and Audio amplifier
6.1.1 Flat panel controller… RTD2523 (U6)
The heart of the system board is the scalar chip of RTD2523. The RTD2523 is a high performance, dual input
graphics processing IC for LCD monitors with resolutions up to SXGA. It provides all key IC functions required
for LCD panel. On-chip functions include an 8-bit triple ADC, PLL, DVI receiver, high scaling engine, OSD
controller and dual LVDS transmitter.
a)
Clock Generation:
Crystal Input Clock (XIN and XOUT): This is the input pair to an internal crystal oscillator and
corresponding logic. A 24.576 MHz crystal is recommended.
b) Hardware Reset (Pin 56):
Hardware Reset signal is provided to MCU (I1). It is active high.
c)
Analog to Digital Converter:
The RTD2523 chip has three ADC's (analog-to-digital converters), one for each color (red, green and
blue) .The analog RGB and synchronous signals are connected to RTD2523 as described below:
Pin Name
Pin Number
Red +
37
Red -
38
Green +
34
ViewSonic Corporation
23
Confidential - Do Not Copy
VA912-4_VA912b-4
Green -
35
Blue +
30
Blue -
31
H sync
42
V sync
43
d) Embedded OSD: Embedded 11.25K SRAM dynamically stores OSD command and fonts.
e)
On chip TMDS receiver: The RTD2523 integrated TMDS receiver, which operates up to 165MHz and can
directly connect to all DVI compliant TMDS transmitters. The TMDS signals are connected to RTD2523 as
described bellow:
f)
Pin Name
Pin NO.
TX0+
20
TX0-
21
TX1+
18
TX1-
17
TX2+
15
TX2-
14
TXC+
23
TXC-
24
PWM controlling function (Pin 112, Pin 113): The RTD2523 has two dedicated PWM outputs of PWM0
and PWM1 to control audio volume and back light brightness.
g) Serial interface ports (pin 70 and pin 71): This serial interface ports communicate with MCU and support
up to 400Kbit per second transmit rate.
h) Panel interface (Pin 85~94, Pin 73~82,) : The RTD2523 driver interface is highly programmable. It
supports dual /Single LVDS interface output.
6.1.2 Power Regulator AIC1117 (U1, U3): The AIC1117 is a low dropout positive adjustable regulator with
minimum of 800mA output current capability.
So it is well suited for 3.3 V and 2.5 V Regulator.
U3 as a 2.5V regulator, Desired output voltage are determined by the equation
Volt=1.25 x (1 + R17/R15)= 2.5
U1 as a 3.3V regulator, Desired output voltage are determined by the equation
Volt=1.255 x (1+ R6/R3)= 3.3
6.2 Audio Amplifier UTC TDA7496L(U9)
The TDA7496L is a stereo 2W+2W class AB power amplifier; Features of the TDA7496L include linear volume
control, Stand-by and mute functions.
6.3 Power/Inverter Board
This is a specific power/inverter for VA912 monitor 45W 5V + 12V power and backlight which converters
12Vdc to drive four cold cathode fluorescence tubes. Electrical specification described as below.
6.3.1 Inverter Electrical specification described as below.
INPUT
ViewSonic Corporation
Rated Input Voltage
12Vdc
Input Voltage Range
11.4~12.6Vdc
Input Current
<1.96A
Off state Input Power
<0.1W
24
Confidential - Do Not Copy
VA912-4_VA912b-4
OUTPUT
On / off control Voltage
2~5.25 for on, 0~0.13 for off
Rated Output Strike-on Voltage
1500~2000Vrms
Rated Output Voltage
710Vrms at 6mA
Rated Output Frequency
40~50KHz
Rated Output Current
6~7mA
6.3.2 Power Electrical specification described as below.
INPUT
OUTPUT
ViewSonic Corporation
Rated Input Voltage
90~264Vac, 47~63Hz
Operation Input Voltage
100~240Vac, 50~60Hz
Input Current
<1.8A@90Vac
Inrush Current
<100A @ 90Vac(Cold start)
Efficiency
80 % TYPICAL AT 115VAC FULL LOAD
Output Voltage Regulation
+/-5%
Output Ripple and Noise
120 mVp-p
Rated Output Current
<4.16A
Turn-on Delay
<3 seconds
25
Confidential - Do Not Copy
VA912-4_VA912b-4
5. Adjustment Procedure
1.
Function test
(1) Test equipment
Color video signal and pattern generator (or PC with SXGV resolution)
(2) Test condition
Before function testing and alignment, the unit must warm up for at least 30 minutes under the
following conditions:
1. Room temperature
2. With full-white screen , RGB , black pattern
3. with cycled display modes.
2.
Test display modes
Item
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
Timing
640 x 350 @ 70Hz, 31.5kHz
640 x 400 @ 60Hz, 31.5kHz
640 x 400 @ 70Hz, 31.5kHz
640 x 480 @ 60Hz, 31.5kHz
640 x 480 @ 67Hz, 35.0kHz
640 x 480 @ 72Hz, 37.9kHz
640 x 480 @ 75Hz, 37.5kHz
640 x 480 @ 85Hz, 43.27kHz
720 x 400 @ 70Hz, 31.5kHz
800 x 600 @ 56Hz, 35.1kHz
800 x 600 @ 60Hz, 37.9kHz
800 x 600 @ 75Hz, 46.9kHz
800 x 600 @ 72Hz, 48.1kHz
800 x 600 @ 85Hz, 53.7kHz
832 x 624 @ 75Hz, 49.7kHz
1024 x 768 @ 60Hz, 48.4kHz
1024 x 768 @ 70Hz, 56.5kHz
1024 x 768 @ 72Hz, 58.1kHz
1024 x 768 @ 75Hz, 60.0kHz
1024 x 768 @ 85Hz, 68.67kHz
1152 x 870 @ 75Hz, 68.7kHz
1280 x 1024 @ 60Hz, 63.4kHz
1280 x 1024 @ 75Hz, 79.97kHz
1280x 720 @ 60Hz, 45kHz (HDTV)
ViewSonic Corporation
Analog
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
26
Confidential - Do Not Copy
Digital
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
VA912-4_VA912b-4
3.
Test pattern
Item
1
Test condition
Frequency & performance
Pattern
Cross-hatch pattern
2
Monitor saturation
16-gray scale pattern
3
RGB color performance
RGB color
4
Sub-pixel defect
RGB color
5
Full white
Full white
6
7.
8.
Full black
5-cycle pattern
1-dot pattern
Full black
5-cycle pattern
1-dot pattern
ViewSonic Corporation
Specification
No noise is allowed, all colors must
be clear
3 to 4 levels must be saturated when
brightness and contrast are set to
100%
Check the color temperature of
RGB signal color
Check the sub-pixel defect
Check the brightness and contrast
ratio, and check for bright pixel
defects
Pattern 2
Pattern 3,
4, 5
Pattern 3,
4,5
Pattern 6
Pattern 7
Pattern 8
Pattern 9
Check the BU
Check the flicker
Pattern 1
Pattern2
Pattern 3
Pattern4
27
Remark
Pattern 1
Confidential - Do Not Copy
VA912-4_VA912b-4
Pattern 5
Pattern6
Pattern 7
Pattern 8
Pattern 9
ViewSonic Corporation
28
Confidential - Do Not Copy
VA912-4_VA912b-4
OSD Function Menu
A. When in Analog Input Mode
1. Main Menu
Press the [1] (Menu) button to enter the Main Menu:
Press the [▲] button to highlight the previous item or the [▼] button to highlight
the next item.
Press the [1] (Menu) button to exit the Main Menu.
(1) Auto Image Adjust Page:
Press the [2] button to execute the auto image adjust function.
Press the [1] button to exit the page.
(2) Contrast/Brightness Page:
Press the [2] button to enter the contrast adjustment page.
Press the [1] button to exit the page.
1) Contrast Item
Press the [▲] button to increase the contrast.
Press the [▼] button to decrease the contrast.
Press the [2] button to enter the brightness adjustment page.
Press the [1] button to exit the page.
2) Brightness Item
Press the [▲] button to increase the brightness.
Press the [▼] button to decrease the brightness.
Press the [2] button to enter the contrast adjustment page.
Press the [1] button to exit the page.
(3) Input Select Page:
Press the [2] button to switch to digital input mode.
(4) Audio Adjust Page:
Press the [▲] button to increase the volume.
Press the [▼] button to decrease the volume.
Press the [2] button to enable or disable mute function .
Press the [1] button to exit the page.
(5) Color Adjust Page:
Press the [2] button to enter the color adjustment page.
Press the [1] button to exit the page.
Press the [▲] button to highlight the previous item or the [▼] button to
highlight the next item.
1) sRGB Item
2) 9300K Item
3) 6500K Item
4) 5400K Item
5) 5000K Item
Press the [2] button to select the currently highlighted item.
Press the [1] button to exit the currently highlighted item.
6) User Color Item
Press the [2] button to enter the user color page.
ViewSonic Corporation
29
Confidential - Do Not Copy
VA912-4_VA912b-4
Press the [1] button to exit the page.
Red, Green, Blue Options:
Press the [2] button to cycle among the colors.
Press the [1] button to exit the page.
Press the [▲] button to increase the selected color level.
Press the [▼] button to decrease the selected color level.
(6) Information Page:
Press the [2] button to enter the information page.
Press the [1] button to exit the information page.
(7) Manual Image Adjust Page:
Press the [2] button to enter the manual image adjustment page.
Press the [1] button to exit the page.
Press the [▲] button to highlight the previous item or the [▼] button to
highlight the next item.
1) H./V. Position Item
Press the [2] button to enter the horizontal/vertical postion adjustment page.
Press the [1] button to exit the page.
a) Horizontal Position:
Press the [2] button to enter the vertical position adjustment page.
Press the [1] button to exit the page.
Press the [▲] button to shift the image to the right.
Press the [▼] button to shift the image to the left.
b) Vertical Position:
Press the [2] button to return to the horizontal position adjustment page.
Press the [1] button to exit the page.
Press the [▲] button to shift the image upward.
Press the [▼] button to shift the image downward.
2) Horizontal Size Item
Press the [2] button to enter the horizontal size adjustment page.
Press the [1] button to exit the page.
Press the [▲] button to make the image wider.
Press the [▼] button to make the image narrower.
3) Fine tune Item
Press the [2] button to enter the fine tuning page.
Press the [1] button to exit the page.
Press “[▲]” Button to adjust character position in one direction.
Press “[▼]“Button to adjust character position in the other direction.
4) Sharpness Item
Press the [2] button to enter the sharpness adjustment page.
Press the [1] button to exit the page.
Press “[▲]” Button to increase image sharpness.
Press “[▼]“ Button to decrease image sharpness.
(8) Setup Menu Page:
ViewSonic Corporation
30
Confidential - Do Not Copy
VA912-4_VA912b-4
Press the [2] button to enter the setup menu page.
Press the [1] button to exit the page.
Press the [▲] button to highlight the previous item or the [▼] button to
highlight the next item.
1) Language Select Item
Press the [2] button to enter the language selection page.
Press the [1] button to exit the page.
Press the [▲] button to highlight the previous item or the [▼] button to
highlight the next item.
English, French… Option
Press the [2] button to select the language.
Press the [1] button to exit the page.
2) Resolution Notice Item
Press the [2] button to enter the resolution notice page.
Press the [1] button to exit the page.
Enable, Disable Option
Press the [2] button to select the highlighted option.
Press the [1] button to exit the page.
Press the [▲] button to highlight the previous option or the [▼] button
to highlight the next option.
3) OSD Position Item
Press the [2] button to enter the OSD position adjustment page.
Press the [1] button to exit the page.
a) Horizontal Position Option
Press the [2] button to enter the vertical position adjustment page.
Press the [1] button to exit the page.
Press the [▲] button to shift the menu to the right.
Press the [▼] button to shift the menu to the left.
b) Vertical Position Option:
Press the [2] button to enter the horizontal position adjustment page.
Press the [1] button to exit the page.
Press the [▲] button to shift the menu upward.
Press the [▼] button to shift the menu downward.
4) OSD Time Out Item
Press the [2] button to enter the OSD time out adjustment page.
Press the [1] button to exit the page.
Press the [▲] button to increase the OSD time out.
Press the [▼] button to decrease the OSD time out.
5) OSD Background Item
Press the [2] button to enter the OSD background selection page.
Press the [1] button to exit the page.
Enable, Disable Option
Press the [▲] button to highlight the previous option or the [▼] button
to highlight the next option.
Press the [2] button to select the highlighted option.
ViewSonic Corporation
31
Confidential - Do Not Copy
VA912-4_VA912b-4
Press the [1] button to exit the page.
(9) Memory Recall Page
Press the [2] button to execute the memory recall function.
Press the [1] button to exit the page.
2. Other Menu:
This “shortcut” menu is directly accessible without bringing up the OSD.
(1) Contrast Dialog
Press the [▲] or [▼] button to enter the Contrast Dialog.
Press the [1] button to exit the Contrast Dialog.
Press the [2] button to enter the Brightness Dialog.
Press the [▲] button to increase the contrast.
Press the [▼] button to decrease the contrast.
(2) Brightness Dialog
Press the [▲] or [▼] button to enter the Brightness Dialog.
Press the [1] button to exit the Brightness Dialog.
Press the [2] button to enter the Contrast Dialog.
Press the [▲] button to increase the brightness.
Press the [▼] button to decrease the brightness.
(3) Analog/Digital Dialog
Press the [2] button to toggle between analog and digital modes.
B. When in Digital Input Mode
1.
Main Menu
Press the [1] (Menu) button to enter the Main Menu:
Press the [▲] button to highlight the previous item or the [▼] button to highlight
the next item.
Press the [1] (Menu) button to exit the Main Menu.
(1) Auto Image Adjust Page:
Press the [2] button to execute the auto image adjust function.
Press the [1] button to exit the page.
(2) Contrast/Brightness Page:
Press the [2] button to enter the contrast adjustment page.
Press the [1] button to exit the page.
1) Contrast Item
Press the [▲] button to increase the contrast.
Press the [▼] button to decrease the contrast.
Press the [2] button to enter the brightness adjustment page.
Press the [1] button to exit the page.
2) Brightness Item
Press the [▲] button to increase the brightness.
Press the [▼] button to decrease the brightness.
Press the [2] button to enter the contrast adjustment page.
Press the [1] button to exit the page.
ViewSonic Corporation
32
Confidential - Do Not Copy
VA912-4_VA912b-4
(3) Input Select Page:
Press the [2] button to switch to analog input mode.
(4) Audio Adjust Page:
Press the [▲] button to increase the volume.
Press the [▼] button to decrease the volume.
Press the [2] button to enable or disable mute function .
Press the [1] button to exit the page.
(4) Color Adjust Page:
Press the [2] button to enter the color adjustment page.
Press the [1] button to exit the page.
Press the [▲] button to highlight the previous item or the [▼] button to
highlight the next item.
1) sRGB Item
2) 9300K Item
3) 6500K Item
4) 5400K Item
5) 5000K Item
Press the [2] button to select the currently highlighted item.
Press the [1] button to exit the currently highlighted item.
6) User Color Item
Press the [2] button to enter the user color page.
Press the [1] button to exit the page.
Red, Green, Blue Options:
Press the [2] button to cycle among the colors.
Press the [1] button to exit the page.
Press the [▲] button to increase the selected color level.
Press the [▼] button to decrease the selected color level.
(5) Information Page:
Press the [2] button to enter the information page.
Press the [1] button to exit the information page.
(6) Manual Image Adjust Page:
Press the [2] button to enter the manual image adjustment page.
Press the [1] button to exit the page.
Press the [▲] button to highlight the previous item or the [▼] button to
highlight the next item.
1) Sharpness Item
Press the [2] button to enter the sharpness adjustment page.
Press the [1] button to exit the page.
Press “[▲]” Button to increase image sharpness.
Press “[▼]“ Button to decrease image sharpness.
(7) Setup Menu Page:
Press the [2] button to enter the setup menu page.
Press the [1] button to exit the page.
ViewSonic Corporation
33
Confidential - Do Not Copy
VA912-4_VA912b-4
Press the [▲] button to highlight the previous item or the [▼] button to
highlight the next item.
1) Language Select Item
Press the [2] button to enter the language selection page.
Press the [1] button to exit the page.
Press the [▲] button to highlight the previous item or the [▼] button to
highlight the next item.
English, French… Option
Press the [2] button to select the language.
Press the [1] button to exit the page.
2) Resolution Notice Item
Press the [2] button to enter the resolution notice page.
Press the [1] button to exit the page.
Enable, Disable Option
Press the [2] button to select the highlighted option.
Press the [1] button to exit the page.
Press the [▲] button to highlight the previous option or the [▼] button
to highlight the next option.
3) OSD Position Item
Press the [2] button to enter the OSD position adjustment page.
Press the [1] button to exit the page.
a) Horizontal Position Option
Press the [2] button to enter the vertical position adjustment page.
Press the [1] button to exit the page.
Press the [▲] button to shift the menu to the right.
Press the [▼] button to shift the menu to the left.
b) Vertical Position Option:
Press the [2] button to enter the horizontal position adjustment page.
Press the [1] button to exit the page.
Press the [▲] button to shift the menu upward.
Press the [▼] button to shift the menu downward.
4) OSD Time Out Item
Press the [2] button to enter the OSD time out adjustment page.
Press the [1] button to exit the page.
Press the [▲] button to increase the OSD time out.
Press the [▼] button to decrease the OSD time out.
5) OSD Background Item
Press the [2] button to enter the OSD background selection page.
Press the [1] button to exit the page.
Enable, Disable Option
Press the [▲] button to highlight the previous option or the [▼] button
to highlight the next option.
Press the [2] button to select the highlighted option.
Press the [1] button to exit the page.
ViewSonic Corporation
34
Confidential - Do Not Copy
VA912-4_VA912b-4
(8) Memory Recall Page
Press the [2] button to execute the memory recall function.
Press the [1] button to exit the page.
2.
Other Menu:
This “shortcut” menu is directly accessible without bringing up the OSD.
(1) Contrast Dialog
Press the [▲] or [▼] button to enter the Contrast Dialog.
Press the [1] button to exit the Contrast Dialog.
Press the [2] button to enter the Brightness Dialog.
Press the [▲] button to increase the contrast.
Press the [▼] button to decrease the contrast.
(2) Brightness Dialog
Press the [▲] or [▼] button to enter the Brightness Dialog.
Press the [1] button to exit the Brightness Dialog.
Press the [2] button to enter the Contrast Dialog.
Press the [▲] button to increase the brightness.
Press the [▼] button to decrease the brightness.
(3) Analog/Digital Dialog
Press the [2] button to toggle between analog and digital modes.
C. Other Information
When the “No Signal” or “Out of Range” messages appear:
If no input signal is detected, the “No Signal” message will appear in the center of
the screen.
If the V-Sync signal rate is greater than than 85Hz or its resolution is greater than
SXGA, the “Out of Range” message will appear in the center of the screen.
Activating Factory Mode and Burn Mode:
While the device is in standby, press the [2] button, then press the power button to
enter Factory Mode. While Factory Mode is active, an additional menu page titled
“Factory Menu” will be accessible. Press the [2] button to enter the Factory Menu
page, then press the [2] button to enter Burn Mode.
When Installing a New Main Board
1. Enter Factory Mode.
2. Use a PC or chrom to send a 32-tone gray scale signal to the monitor.
3. Select “Auto Color”
ViewSonic Corporation
35
Confidential - Do Not Copy
VA912-4_VA912b-4
Firmware update procedure :
When you received a received monitor , please check whether the firmware version. If not , please following
procedure to upgrade to the latest version .
1. Equipment needed :
- VA912-4/VA912b-4/VA912-4U
- PC ( Personal computer )
- LPT cable
- Fixture (LM5ISP)
- Firmware upgrade program
-
ViewSonic Corporation
36
Confidential - Do Not Copy
VA912-4_VA912b-4
2. Connection :
To PC
To Monitor
Appendix A : How to install the software for ISP :
0. To setup ISP environment :
Hardware:
PC or notebook, parallel(printer) cable, ISP tooling.
Software:
If OS was Win2000 or WinXP , please install “PORT95NT.exe”
In order to ensure can execute ISP program, please set BIOS in PC or Notebook as Fig 0.0
Fig 0.0
ViewSonic Corporation
37
Confidential - Do Not Copy
VA912-4_VA912b-4
0.1 Double-click the “ PORT95NT.exe” in Windows & install the program. , see Fig 0.1
Fig 0.1
0.2 Keep on press “ Next “ 4 times to go through the installation processes, see Fig. 0.2
Fig. 0.2
ViewSonic Corporation
38
Confidential - Do Not Copy
VA912-4_VA912b-4
0.3 Choose “ Typical “ t hen press “ Next “ , see Fig. 0.3
Fig. 0.3
0.4 Keep on press “ Next “ 4 times to go through the installation processes, see Fig. 0.4
Fig. 0.4
ViewSonic Corporation
39
Confidential - Do Not Copy
VA912-4_VA912b-4
0.5 Install completed , restart the PC or notebook. See Fig 0.5
Fig. 0.5
ViewSonic Corporation
40
Confidential - Do Not Copy
VA912-4_VA912b-4
1. Install ISP
1.1 User could download ISP driver and PORT95NT install from Myson Century website
(www.myson.com.tw )
1.2 After extracting the ZIP file , the total files list as Fig 1.0 , and double click the file of setup.exe to install.
Fig 1.0
1.3 Press “ Next “ button to continue., see Fig 1.1
ViewSonic Corporation
Fig 1.1
41
Confidential - Do Not Copy
VA912-4_VA912b-4
1.4 Keep default setting or press “ Change “ button for selecting the path that you want , and then press “ Next
“ button to continue , see Fig 1.2
Fig 1.2
1.5 Press “ Install “ button to continue , see Fig 1.3
Fig. 1.3
ViewSonic Corporation
42
Confidential - Do Not Copy
VA912-4_VA912b-4
1.6 Installation has finished , press “ Finish “ button , see Fig 1.4
Fig. 1.4
Appendix B : How to use software to upgrade the BIOS :
2.1 After installation , we could find the shortcut in the setting path or the program bar ( default setting ) , see Fig
2.1
Fig. 2.1
ViewSonic Corporation
43
Confidential - Do Not Copy
VA912-4_VA912b-4
2.2 Security file is a key to use ISP function , press “ OK “ button , see Fig 2.2
Fig. 2.2
2.3 The warning is used to remind user of that different CPU rate may cause ISP function fail. (it’s limited by IIC
protocol ) , press “ OK “ button , see Fig 2.3
Fig. 2.3
ViewSonic Corporation
44
Confidential - Do Not Copy
VA912-4_VA912b-4
2.4 Press “ Create Se curity File “ button to key in Security code . Adjusting bar to decrease speed of IIC bus ,
See Fig. 2.4 .
Fig. 2.4
2.5 Fig 2.5 shows the setting for security code of software ISP . it needs 2 command No. and key in command
sequentially for 7C , 4C , 77. The command No. and command must be set by user while coding. About the
detailed of setting , please refer to section 6 boot code of ISP .
Fig. 2.5
ViewSonic Corporation
45
Confidential - Do Not Copy
VA912-4_VA912b-4
Appendix C : Use ISP to program MCU
3.1 Select MTV type first , load the binary or intel hex file that you want to program into the MCU , and select
“ AUTO” item , then press “ RUN “ button , see fig3.1
Fig. 3.1
flash .
3.2 If user change the MTV type , it must load file again , or the buffer of load file will be cleared .
3.3 CRC ( cyclic redundancy check ) : the host can check CRC register’s result instead of reading every byte in
Fig.3.2
The message of Check MCU CRC OK means that the host verify OK for the progress of program , see
Fig. 3.2
ViewSonic Corporation
46
Confidential - Do Not Copy
VA912-4_VA912b-4
VA912-4 series de-assembling procedure
1. Move the monitor our from carton
2. Put the monitor on desk & face down
3. Remove the I/O cover
4. Loose the screws & remove the stand
5. Separate the hook by tool (coin or screw-driver)
6. Remove the bezel & cover & AL-Foil
ViewSonic Corporation
47
Confidential - Do Not Copy
VA912-4_VA912b-4
7. Pull out the CCFL cables
8. Loose the shielding screw
9. Tear off the yellow tape
10. Tear off the black tape
11. Loose the Button/B screw
12. Move the Button board
13. Remove the speaker
14. Remove the shielding
ViewSonic Corporation
48
Confidential - Do Not Copy
VA912-4_VA912b-4
15. Remove the AL-foil
16.Remove the AL-Foil & black tape
17. Loose the shield
18. Loose the bezel screw
ViewSonic Corporation
49
Confidential - Do Not Copy
VA912-4_VA912b-4
19. Loose the BKT screw L/R
20. Remove the PCBA & mylar
21. Take out PCBA & remove the cables
ViewSonic Corporation
50
Confidential - Do Not Copy
VA912-4_VA912b-4
VA912-4 series packing method
1. Sticker on LCD protection film
2. Put the monitor into the PE or EPE bags
3. Put on the end-cap left / right
4. Put the monitor into carton
Face-up
5. Put all accessories into carton
6. Seal the monitor
handler
Users manual
Power cable
ViewSonic Corporation
Base
VGA & DVI cable
51
Confidential - Do Not Copy
VA912-4_VA912b-4
6. Troubleshooting
No power
No Power
Check CN1 pin 5,6
No
5V correct?
Change power
board module
OK
Check U1 pin2
No
Change U1.
No
Change U3
Output 3.3V?
OK
Check U3 pin 2
Output 2.5V?
OK
Check X’tal Y1=24.576MHz?
No
Change Y1 or Y2
And Y2=11.092MHz?
OK
Check button cable
& button board?
No
Change cable or
button board
OK
Change M/B
ViewSonic Corporation
52
Confidential - Do Not Copy
VA912-4_VA912b-4
No Audio
No Audio Output
Check Input
Signal J3 OK?
No
Check Input source
or Change J3
No
Change Speaker or
JP2(Cable)
No
Change power
board module
OK
Check JP2 to
Speaker OK?
OK
Check CN1 pin
1,2=12V?
OK
Check U9(pin6)
Volume and Q15
No
Change Q15
OK
Check U9
pin12(Mute),pin11(
Stby)
No
Change U9
OK
Change M/B
ViewSonic Corporation
53
Confidential - Do Not Copy
VA912-4_VA912b-4
Display color abnormal:
Display color abnormal
Check panel
cable?
No
Change panel cable
OK
Check open/short
of U6
No
Repair open/short
OK
Check panel
power supply of
No
Change Q8
OK
Check panel
No
Change panel
OK
Change M/B
ViewSonic Corporation
54
Confidential - Do Not Copy
VA912-4_VA912b-4
7. Recommended Spare Parts List
RECOMMENDED SPARE PARTS LIST (VA912-4)
ViewSonic Model Number:VS10867
Serial No. Prefix: PW7
Item
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
Description
Accessories:
Rev: 1b
ECR/ECN
ViewSonic P/N
Added on 05/31/06
A-PC-0106-0224
Power cable
A-00003642
POWER CORD 3P 1.8M(USA)V04VS350012180 GP
PC Board Assembly: POWER BOARD ADP/INV,FSP043--2PI01 90~264V
B-00003993
B-00004169
B-00004170
Main Board
Button board
Main Board L9VA--H M/B (RTD2523B,HSD) GP
Control Board (Button Board Assy L9VA)
W0VA BASE SUB ASSY (S/B)
Cabinets:
Added on 05/31/06
Added on 05/31/06
C-00004147
C-00004171
C-00004172
Front bezel assy
BACK COVER (L9VA--U LCD COVER ASSY (S/B)
Front Bezel Assy (L9VA--U LCD (S/B)
HINGE COVER L9VA B(EBL9VA02,R3A)
Cables:
Added on 05/31/06
Added on 05/31/06
Cable MB-LCD
CABLE MB--VGA (15/15P,1.8M)L7VD
CABLE ASSY L0T MB--DVI(24P,REV2A)
Documentation:
Electronic
Components:
Added on 05/31/06
Added on 05/31/06
Added on 05/31/06
LCD(TFT)HSD 190ME13-A02(8MS) A GP
LCD(TFT)19" HSD190ME13-A03 GP
SPEAK ASSY L9VA FG--TE200 1.5W*2
LCD 19"HSD190ME13--A12 FOR VSC CON
LCD 19"HSD190ME13--A16 FOR VSC CON
Hardware:
Added on 05/31/06
Added on 05/31/06
Screw F4.0*14-I(BNI)
Miscellaneous:
Packing Material:
Plastics:
SCREW M3.0*6,B(NI)
SCREW M3.0*4.0--I(NI)
8MS STICKER L7VC(HCL7V028,REV3A)
IO NUT LI1(MBLI1004,REV3A)
LCD FILM L9V(JXL9V001,REV3A)
RUBBER PLUG VESA L9V(GAL9V002,REV3A)
GENERIC BOX (S) L9VA(HFL9VA02,REV3A)
CRAFT FOAM SET
CRAFT BOX
END CAP--L L9VA(HBL9VA01,REV3A)
END CAP--R L9VA(HBL9VA02,REV3A)
EPE BAG L7VX(HAL7V002,REV3A)
W0VA STAND ASSY (S/B)
CB-00003440
power cord
power board
Universal number#
Q'ty
1
21L9TAMB090
23L9VABB003
Main board
Button board
1
1
1SL9VAMB011
1SL9VABB008
38W0VABS010
main board
button board
Base
1
1
1
1
1
24L9VALB012
front bezel ass'y
1
25L9VALC010
34L9VALB012
EBL9VA02028
back cover assembly
front bezel assembly
hinge cover
1
1
1
DD0L9VLC015
Cable MB-LCD
1
DDL7VDPC005
DD0L0TTH108
VGA cable
DVI cable
1
1
DD0L0TPC007
Audio cable
1
DD0L9VLC023
DDL9VABU001
DDW9ZAPA009
MB
cable Button
audio cable
1
1
1
CB-00005211
DC-00004174
HFL9VA02013
User manual
1
DC-00005994
HGL9VA01018
user guide
1
E-00004175
E-00004176
E-00004177
AA90ME13006
AA90ME13014
LCD panel (2nd source)
LCD panel
1
1
DN0TE200F00
AA90ME130B2
AA90ME130C1
speaker assembly
LCD panel
LCD panel
1
1
1
E-00005995
E-00005996
M-00002264
M-MS-0808-8986
M-MS-0808-9682
Added on 05/31/06
DM333181G97
AS05B312D00
CB-00004152
HW-00004157
M-SCW-0824-0814
M-SCW-0824-6802
Added on 05/31/06
Added on 05/31/06
Location
Power cable
CB-00004149
CB-00004173
User manual + CD wizard
CD+QSG L9VA(HGL9VA01,REV3A
C-00005992
C-00005993
CB-00002525
CB-00002602
Added on 05/31/06
Audio cable
LCD cable--CABLE LVDS(30P,140MM,LINKTEC,AU)L9VA
MB--CABLE MB--BUTTON(10P/10P,280MM)L9VA
CABLE AUDIO(ST,1.8M)BLACK W9ZA
B-00005990
B-00005991
Ref. P/N
DM33T181004
M-MS-0808-9815
P-00004178
P-00001347
P-00002515
P-00004179
P-00004180
M-MS-0808-9158
PL-00004163
MF40140IJ29
Screw
7
MM30060BBJ3
MM30040IBJ9
HCL7V028010
MBLI1004018
JXL9V001010
GAL9V002014
HFL9VA02013
30833
20653
HBL9VA01013
HBL9VA02010
HAL7V002019
26W0VASA016
Sscrews
screws
STICKER
I/O nuts
LCD film
rubber plug
carton
6
8
1
4
1
4
1
cushion
cushion
EPE bag
stand
1
1
1
1
Remark 1: Above listed items are examples, supplier can expand the rows to add more necessary items.
Remark 2: All revised RSPLs with newly added items or any change made should be highlighted and correlated with the ECN/ECR approved by ViewSonic Corporation. This is to eliminate repeated cross
checks of each item between this version and prior versions.
RECOMMENDED SPARE PARTS LIST (VA912b-4)
ViewSonic Model Number:VS10867
Serial No. Prefix: PW8
Item
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
Rev: 1b
Description
Accessories:
PC Board
Assembly:
Cabinets:
Cables:
Documentation:
Electronic
Components:
Miscellaneous:
Hardware:
Packing Material:
power cord
power board
main board
button board
Base
hinge cover
front bezel assembly
back cover assembly
VGA cable
DVI cable
MB-LCD cable
cable Button-MB
audio cable
user guide
speaker assembly
LCD panel
LCD panel
STICKER
I/O nuts
LCD film
rubber plug
Sscrews
screws
cushion
cushion
EPE bag
Plastics:
carton
stand
ECR/ECN
POWER CORD 3P 1.8M(USA)V04VS350012180 GP
ADP/INV,FSP043-2PI01 90~264V GP
L9VA-H M/B SPARE PART(RTD2523B,HSD) GP
L9VA BUTTON/B ASSY GP
W0VA BASE SUB ASSY (MID) GP
HINGE COVER L9VA B(EBL9VA02,R3A) GP
L9VA-U LCD BEZEL SUB ASSY (MID) GP
L9VA-U LCD COVER ASSY (MID) GP
CABLE MB-VGA (15/15P,1.8M)L7VD GP
CABLE ASSY L0T MB-DVI(24P,REV2A) GP
CABLE LVDS(30P,140MM,LINKTEC,AU)L9VA GP
CABLE MB-BUTTON(10P/10P,280MM)L9VA GP
CABLE AUDIO(ST,1.8M)BLACK W9ZA GP
CD+QSG L9VA(HGL9VA01,REV3A) GP
SPEAK ASSY L9VA FG-TE200 1.5W*2 GP
LCD 19"HSD190ME13-A12 FOR VSC CON GP
LCD 19"HSD190ME13-A16 FOR VSC CON GP
8MS STICKER L7VC(HCL7V028,REV3A)GP
IO NUT LI1(MBLI1004,REV3A)GP
LCD FILM L9V(JXL9V001,REV3A) GP
RUBBER PLUG VESA L9V(GAL9V002,REV3A)GP
SCREW M3.0*6,B(NI) GP
SCREW M3.0*4.0-I(NI) GP
END CAP-L L9VA(HBL9VA01,REV3A) GP
END CAP-R L9VA(HBL9VA02,REV3A) GP
CRAFT BOX
EPE BAG L7VX(HAL7V002,REV3A) GP
CRAFT FOAM SET
GENERIC BOX(MID) L9VA(HFL9VA02,REV3A) GP
W0VA STAND ASSY (MID) GP
ViewSonic P/N
A-PC-0106-0224
B-00003993
B-00005990
B-00005991
C-00004165
C-00005749
C-00005997
C-00005998
CB-00002602
CB-00003440
CB-00004152
CB-00004173
CB-00005211
DC-00005994
E-00004177
E-00005995
E-00005996
M-00002264
M-MS-0808-8986
M-MS-0808-9682
M-MS-0808-9815
M-SCW-0824-0814
M-SCW-0824-6802
P-00004179
P-00004180
P-00002515
M-MS-0808-9158
P-00001347
P-00004183
PL-00004168
Ref. P/N
Location
Universal number#
DM333181G97
AS05B312D00
1SL9VAMB011
1SL9VABB008
38W0VABS001
EBL9VA02010
34L9VALB004
25L9VALC001
DDL7VDPC005
DD0L0TTH108
DD0L9VLC023
DDL9VABU001
DDW9ZAPA009
HGL9VA01018
DN0TE200F00
AA90ME130B2
AA90ME130C1
HCL7V028010
MBLI1004018
JXL9V001010
GAL9V002014
MM30060BBJ3
MM30040IBJ9
HBL9VA01013
HBL9VA02010
20653
HAL7V002019
30833
HFL9VA01017
26W0VASA008
Q'ty
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
4
1
4
6
8
1
1
1
1
1
Remark 1: Above listed items are examples, supplier can expand the rows to add more necessary items.
Remark 2: All revised RSPLs with newly added items or any change made should be highlighted and correlated with the ECN/ECR approved by ViewSonic Corporation. This is to eliminate
repeated cross checks of each item between this version and prior versions.
ViewSonic Corporation
55
Confidential - Do Not Copy
VA912-4_VA912b-4
Item
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
ViewSonic Model Number: VS10867
Rev: 1b
Serial No. Prefix: PW7
ViewSonic P/N
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
B-00004170
N/A
N/A
N/A
PL-BT-0706-0127
B-00003993
N/A
C-00005992
N/A
N/A
N/A
N/A
N/A
M-SCW-0824-6802
M-SCW-0824-0814
M-MS-0808-8986
N/A
CB-00004152
CB-00004173
E-00004177
N/A
M-MS-0808-9247
N/A
M-SCW-0824-6761
N/A
M-SCW-0824-0726
C-00004172
N/A
N/A
M-MS-0808-9411
PL-00004163
N/A
N/A
N/A
N/A
HW-00004157
N/A
M-SCW-0824-6895
N/A
C-00005993
M-MS-0808-9815
M-SCW-0824-6797
N/A
N/A
E-00005995
E-00005996
N/A
N/A
N/A
C-00004147
M-MS-0808-9158
P-00004179
P-00004180
M-LB-0813-0747
N/A
M-LB-0813-0745
P-00004178
N/A
PL-00005198
M-MS-0808-9682
M-LB-0813-1043
N/A
M-00002264
CB-00002602
CB-00005211
N/A
N/A
DC-00003536
A-PC-0106-0224
CB-00003440
ViewSonic Corporation
Ref. P/N
1L9VAHXVS88
21L9ZCMB035
31L9ZCSS014
DFHD08FR005
DFDS15FR041
DFDS15FR076
DFDI30FR022
DFDI30FR103
DFHD30MR267
DFHD10MR324
CC722L2MD07
CC71004MD68
CC62204MD23
CC610L3MD01
CC73303MD51
DFHD04MR132
DFPJ05FR153
BG624000008
AL007496D02
AL007496D29
23L9VABB003
DAL9VATB115
BEYG0014DA0
DFHD10MR324
DHP0002B108
AS05B312D00
24L9VALB021
34L9VALB012
36L9VAPS001
FAL9VA01012
FAL9VA02019
FCL7B001018
FCM7T004014
MM30040IBJ9
MM30060BBJ3
MBLI1004018
MS35080B456
DD0L9VLC023
DDL9VABU001
DN0TE200F00
FCL5M005011
EBL70023013
GAL70003011
MM30030IBJ4
FCL9ZA02015
MF30080BBJ5
25L9VALC010
EAL9VA02027
FBL9VA01013
FBL70008014
26W0VASA016
EAW0VA03029
EAW0VA05021
FAW0VA04017
FBW0VA02015
MF40140IJ29
DDL9TATH107
MF40080IBJ1
27L9VACS019
EBL9VA02028
GAL9V002014
MF40080BJ29
MM40100BL61
2AL9VAPTU11
AA90ME130B2
AA90ME130C1
AZL9VABU002
FBL9VA02010
28L9VAPK016
38W0VABS010
HAL7V002019
HBL9VA01013
HBL9VA02010
HCL7V004013
HCL9VA03017
HCL7V002011
HFL9VA02013
HGL9VA01018
JXLM5003011
JXL9V001010
HCL70021011
HFL9T002018
HCL7V028010
DDL7VDPC005
DDW9ZAPA009
HCL9VA02011
HDL7VC01019
HCL9V009011
DM333181G97
DD0L0TTH108
BOM LIST (VA912-4)(HSD)
Description
L9VA-H LCD MONITOR(VA912-4)(S/B,USA)GP
L9ZC M/B ASSY(FOR L9VA-H)RTD2523B GP
L9ZC M/B S/S ASSY(FOR L9ZC-6U)2523B GP
CONN DIP HEADER 8P2R FR(P2.54,H5.0) GP
CONN D-SUB 15P 3R FR(P1.15,H12.55) GP
CONN D-SUB 15P 3R FR(P1.15,H12.55) GP
CONN DVI-I DIP30P 3R FR(P1.905 H10.04)GP
CONN DVI-I DIP30P 3R FR(P1.905,H10.04)GP
CONN DIP HEADER 30P 2R MR(P2.0,H4.0) GP
CONN DIP HEADER 10P 1R MR(P2.0,H4.1) GP
CAP EC 220U 10V(+ -20%,105C,6.3*7)LXN GP
CAP EC 100U 25V(+-20%,105C,6*11,2K) GP
CAP EC 22U 25V(+-20%,105C,5*11,2KHR)GP
CAP EC DIP 10U 16V(+-20%,105C,4*7)LXNGP
CAP EC 330U 16V(+-20%,105C,8*11,LESR)GP
CONN DIP HEADER 4P 1R MR(P2.0,H4.1) GP
CONN DIP PHONE JACK 5P FR(H10)248C GP
XTAL DIP 24.0MHZ(+-50PPM,49/S) GP
IC(20P) TDA7496L(DIP) GP
IC(20P) UTC TDA7496LK(DIP) GP
L9VA BUTTON/B ASSY GP
PCB(BUTTON)L9VA TB(1L,204*16,REVA) GP
LED(DIP) YELLOW/GREEN(L-3WYGW-F01) GP
CONN DIP HEADER 10P 1R MR(P2.0,H4.1) GP
SWITCH PUSH BUTTON(PT-002-B1,50MA,12V)GP
ADP/INV,FSP043-2PI01 90~264V GP
L9VA LCD BEZEL ASSY(S/B,NO PANEL HOOK)GP
L9VA-U LCD BEZEL SUB ASSY (S/B) GP
L9VA PCB SHIELDING ASSY GP
LCD BKT-L L9VA(FAL9VA01,REV3A) GP
LCD BKT-R L9VA(FAL9VA02,REV3A) GP
POWER BOARD MYLAR L7B(FCL7B001,REV3A)GP
AL FOIL M7T(FCM7T004,REV3A) GP
SCREW M3.0*4.0-I(NI) GP
SCREW M3.0*6,B(NI) GP
IO NUT LI1(MBLI1004,REV3A)GP
SCREW F3.5*8-B(NI)(WASHER)GP
CABLE LVDS(30P,140MM,LINKTEC,AU)L9VA GP
CABLE MB-BUTTON(10P/10P,280MM)L9VA GP
SPEAK ASSY L9VA FG-TE200 1.5W*2 GP
AL FOIL(PANEL) L5M(FCL5M005,REV 3A)GP
WIRE MOUNTS L70L-E(EBL70023,REV3A) GP
RUBBER-HOLDER L70L-E(GAL70003,REV3A)GP
SCREW M3*3-I-NI GP
AL FOIL L9ZA-A1(FCL9ZA02,REV3A)GP
SCREW F3.0*8L,B,NI GP
L9VA-U LCD COVER ASSY (S/B) GP
LCD COVER L9VA B(EAL9VA02,R3A) GP
HINGE-PLATE L9VA(FBL9VA01,REV3A) GP
LOCK METAL L70B(FBL70008,REV3A) GP
W0VA STAND ASSY (S/B) GP
STAND FRONT W0VA(EAW0VA03,R3A)BK GP
STAND-BACK W0VA(EAW0VA05,R3A)BK GP
HINGE ASSY W0VA(FAW0VA04,REV3A)GP
CONTACT-PLATE W0VA(FBW0VA02,REV3A)GP
SCREW F4.0*14-I(BNI) GP
CABLE STAND-HINGE(1P,150MM)L7TA GP
SCREW F4.0*8-I(NI)GP
L9VA-U CHASSIS ASSY (S/B) GP
HINGE COVER L9VA B(EBL9VA02,R3A) GP
RUBBER PLUG VESA L9V(GAL9V002,REV3A)GP
SCREW F4.0*8-B(BNI) GP
SCREW M4*10.0-B(BNI,NYLOK) GP
L9VA-H PANEL KIT ASSY(HSD) GP
LCD 19"HSD190ME13-A12 FOR VSC CON GP
LCD 19"HSD190ME13-A16 FOR VSC CON GP
L9VA-H SW BIOS IMAGE(HSD)RTD2523B N/A
PANEL HOOK L9VA(FBL9VA02,REV3A)GP
L9VA-U PACKING ASSY (S/B) GP
W0VA BASE SUB ASSY (S/B) GP
EPE BAG L7VX(HAL7V002,REV3A) GP
END CAP-L L9VA(HBL9VA01,REV3A) GP
END CAP-R L9VA(HBL9VA02,REV3A) GP
CORE LABEL(HCL7V004,REV3A)GP
ID LABEL(S) L9VA(HCL9VA03,REV3A) GP
SERIAL LEBAL L7V(HCL7V002,REV3A) GP
CARTON(S) L9VA(HFL9VA02,REV3A) GP
CD+QSG L9VA(HGL9VA01,REV3A) GP
HANDLE LM5S(JXLM5003,REV 3B) GP
LCD FILM L9V(JXL9V001,REV3A) GP
HI-POT LABEL L70L(HCL70021,REV3A)GP
SPACE PLATE L9T(HFL9T002,REV3A)GP
8MS STICKER L7VC(HCL7V028,REV3A)GP
CABLE MB-VGA (15/15P,1.8M)L7VD GP
CABLE AUDIO(ST,1.8M)BLACK W9ZA GP
CARTON LABEL(4) L9VA(HCL9VA02,R3A) GP
SERVICR PAPER L7VC(HDL7VC01,REV3A) GP
HG LABEL L9VD(HCL9V009,REV3A)GP
POWER CORD 3P 1.8M(USA)V04VS350012180 GP
CABLE ASSY L0T MB-DVI(24P,REV2A) GP
56
Location
Universal number#
CN1
CN2
CN2
CN4
CN4
CN5
CN6
C4
C9,C45
C32
C36,C48,EC2,EC3
C67,C69,C73,C75,EC1
JP2
J1
Y2
U7
U7
LED1
CN1
SW1,SW2,SW3,SW4,SW5,SW6
Confidential - Do Not Copy
Q'ty
1
1
1
1
1
1
1
1
1
1
2
1
4
5
1
1
1
1
1
1
1
1
1
6
1
1
1
1
1
1
1
3
8
6
4
1
1
1
1
1
1
2
4
1
2
1
1
1
1
1
1
1
1
1
7
1
1
1
1
4
2
6
1
1
1
1
2
1
1
1
1
1
1
1
1
1
1
1
1
1
0.027
1
1
1
1
1
1
1
1
VA912-4_VA912b-4
ViewSonic Model Number: VS10
Rev: 1b
PW8
Serial No. Prefix
Item
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
ViewSonic P/N
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
B-00004170
N/A
N/A
N/A
PL-BT-0706-0127
B-00003993
N/A
C-00005997
N/A
N/A
N/A
N/A
N/A
M-SCW-0824-6802
M-SCW-0824-0814
M-MS-0808-8986
N/A
CB-00004152
CB-00004173
E-00004177
N/A
M-MS-0808-9247
N/A
M-SCW-0824-6761
N/A
M-SCW-0824-0726
C-00005998
N/A
N/A
M-MS-0808-9411
PL-00004168
N/A
N/A
N/A
N/A
HW-00004157
N/A
M-SCW-0824-6895
N/A
C-00005749
N/A
M-SCW-0824-6797
N/A
N/A
E-00005995
E-00005996
N/A
N/A
N/A
C-00004165
CB-00002602
P-00004159
CB-00005211
P-00004179
P-00004180
M-LB-0813-0747
N/A
M-LB-0813-0745
P-00004183
DC-00005994
PL-00005198
M-MS-0808-9682
M-LB-0813-1043
N/A
M-00002264
N/A
N/A
DC-00003536
A-PC-0106-0224
CB-00003440
Ref. P/N
1L9VAHXVS02
21L9ZCMB035
31L9ZCSS014
DFHD08FR005
DFDS15FR041
DFDS15FR076
DFDI30FR022
DFDI30FR103
DFHD30MR267
DFHD10MR324
CC722L2MD07
CC71004MD68
CC62204MD23
CC610L3MD01
CC73303MD51
DFHD04MR132
DFPJ05FR153
BG624000008
AL007496D02
AL007496D29
23L9VABB003
DAL9VATB115
BEYG0014DA0
DFHD10MR324
DHP0002B108
AS05B312D00
24L9VALB039
34L9VALB004
36L9VAPS001
FAL9VA01012
FAL9VA02019
FCL7B001018
FCM7T004014
MM30040IBJ9
MM30060BBJ3
MBLI1004018
MS35080B456
DD0L9VLC023
DDL9VABU001
DN0TE200F00
FCL5M005011
EBL70023013
GAL70003011
MM30030IBJ4
FCL9ZA02015
MF30080BBJ5
25L9VALC001
EAL9VA02019
FBL9VA01013
FBL70008014
26W0VASA008
EAW0VA03011
EAW0VA05013
FAW0VA04017
FBW0VA02015
MF40140IJ29
DDL9TATH107
MF40080IBJ1
27L9VACS001
EBL9VA02010
GAW0VA02014
MF40080BJ29
MM40100BL61
2AL9VAPTU11
AA90ME130B2
AA90ME130C1
AZL9VABU002
FBL9VA02010
28L9VAPK008
38W0VABS001
DDL7VDPC005
HAL0T002019
DDW9ZAPA009
HBL9VA01013
HBL9VA02010
HCL7V004013
HCL9VA01014
HCL7V002011
HFL9VA01017
HGL9VA01018
JXLM5003011
JXL9V001010
HCL70021011
HFL9T002018
HCL7V028010
HCL9VA02011
HDL7VC01019
HCL9V009011
DM333181G97
DD0L0TTH108
ViewSonic Corporation
BOM LIST (VA912b-4)(HSD)
Description
L9VA-H LCD MONITOR(VA912B-4)(USA) GP
L9ZC M/B ASSY(FOR L9VA-H)RTD2523B GP
L9ZC M/B S/S ASSY(FOR L9ZC-6U)2523B GP
CONN DIP HEADER 8P2R FR(P2.54,H5.0) GP
CONN D-SUB 15P 3R FR(P1.15,H12.55) GP
CONN D-SUB 15P 3R FR(P1.15,H12.55) GP
CONN DVI-I DIP30P 3R FR(P1.905 H10.04)GP
CONN DVI-I DIP30P 3R FR(P1.905,H10.04)GP
CONN DIP HEADER 30P 2R MR(P2.0,H4.0) GP
CONN DIP HEADER 10P 1R MR(P2.0,H4.1) GP
CAP EC 220U 10V(+ -20%,105C,6.3*7)LXN GP
CAP EC 100U 25V(+-20%,105C,6*11,2K) GP
CAP EC 22U 25V(+-20%,105C,5*11,2KHR)GP
CAP EC DIP 10U 16V(+-20%,105C,4*7)LXNGP
CAP EC 330U 16V(+-20%,105C,8*11,LESR)GP
CONN DIP HEADER 4P 1R MR(P2.0,H4.1) GP
CONN DIP PHONE JACK 5P FR(H10)248C GP
XTAL DIP 24.0MHZ(+-50PPM,49/S) GP
IC(20P) TDA7496L(DIP) GP
IC(20P) UTC TDA7496LK(DIP) GP
L9VA BUTTON/B ASSY GP
PCB(BUTTON)L9VA TB(1L,204*16,REVA) GP
LED(DIP) YELLOW/GREEN(L-3WYGW-F01) GP
CONN DIP HEADER 10P 1R MR(P2.0,H4.1) GP
SWITCH PUSH BUTTON(PT-002-B1,50MA,12V)GP
ADP/INV,FSP043-2PI01 90~264V GP
L9VA LCD BEZEL ASSY(NO PANEL HOOK) GP
L9VA LCD BEZEL SUB ASSY GP
L9VA PCB SHIELDING ASSY GP
LCD BKT-L L9VA(FAL9VA01,REV3A) GP
LCD BKT-R L9VA(FAL9VA02,REV3A) GP
POWER BOARD MYLAR L7B(FCL7B001,REV3A)GP
AL FOIL M7T(FCM7T004,REV3A) GP
SCREW M3.0*4.0-I(NI) GP
SCREW M3.0*6,B(NI) GP
IO NUT LI1(MBLI1004,REV3A)GP
SCREW F3.5*8-B(NI)(WASHER)GP
CABLE LVDS(30P,140MM,LINKTEC,AU)L9VA GP
CABLE MB-BUTTON(10P/10P,280MM)L9VA GP
SPEAK ASSY L9VA FG-TE200 1.5W*2 GP
AL FOIL(PANEL) L5M(FCL5M005,REV 3A)GP
WIRE MOUNTS L70L-E(EBL70023,REV3A) GP
RUBBER-HOLDER L70L-E(GAL70003,REV3A)GP
SCREW M3*3-I-NI GP
AL FOIL L9ZA-A1(FCL9ZA02,REV3A)GP
SCREW F3.0*8L,B,NI GP
L9VA LCD COVER ASSY GP
LCD COVER L9VA(EAL9VA02,REV3A) GP
HINGE-PLATE L9VA(FBL9VA01,REV3A) GP
LOCK METAL L70B(FBL70008,REV3A) GP
W0VA STAND ASSY GP
STAND-FRONT W0VA(EAW0VA03,REV3A)GP
STAND-BACK W0VA(EAW0VA05,REV3A)GP
HINGE ASSY W0VA(FAW0VA04,REV3A)GP
CONTACT-PLATE W0VA(FBW0VA02,REV3A)GP
SCREW F4.0*14-I(BNI) GP
CABLE STAND-HINGE(1P,150MM)L7TA GP
SCREW F4.0*8-I(NI)GP
L9VA CHASSIS ASSY GP
HINGE COVER L9VA(EBL9VA02,REV3A) GP
RUBBER PLUG VESA (GAW0VA02,R3A)GRAY GP
SCREW F4.0*8-B(BNI) GP
SCREW M4*10.0-B(BNI,NYLOK) GP
L9VA-H PANEL KIT ASSY(HSD) GP
LCD 19"HSD190ME13-A12 FOR VSC CON GP
LCD 19"HSD190ME13-A16 FOR VSC CON GP
L9VA-H SW BIOS IMAGE(HSD)RTD2523B N/A
PANEL HOOK L9VA(FBL9VA02,REV3A)GP
L9VA PACKING ASSY GP
W0VA BASE SUB ASSY GP
CABLE MB-VGA (15/15P,1.8M)L7VD GP
PE BAG L0T(HAL0T002,REV3A)GP
CABLE AUDIO(ST,1.8M)BLACK W9ZA GP
END CAP-L L9VA(HBL9VA01,REV3A) GP
END CAP-R L9VA(HBL9VA02,REV3A) GP
CORE LABEL(HCL7V004,REV3A)GP
ID LABEL L9VA(HCL9VA01,REV3A) GP
SERIAL LEBAL L7V(HCL7V002,REV3A) GP
CARTON L9VA(HFL9VA01,REV3A) GP
CD+QSG L9VA(HGL9VA01,REV3A) GP
HANDLE LM5S(JXLM5003,REV 3B) GP
LCD FILM L9V(JXL9V001,REV3A) GP
HI-POT LABEL L70L(HCL70021,REV3A)GP
SPACE PLATE L9T(HFL9T002,REV3A)GP
8MS STICKER L7VC(HCL7V028,REV3A)GP
CARTON LABEL(4) L9VA(HCL9VA02,R3A) GP
SERVICR PAPER L7VC(HDL7VC01,REV3A) GP
HG LABEL L9VD(HCL9V009,REV3A)GP
POWER CORD 3P 1.8M(USA)V04VS350012180 GP
CABLE ASSY L0T MB-DVI(24P,REV2A) GP
57
Location
Universal number#
CN1
CN2
CN2
CN4
CN4
CN5
CN6
C4
C9,C45
C32
C36,C48,EC2,EC3
C67,C69,C73,C75,EC1
JP2
J1
Y2
U7
U7
LED1
CN1
SW1,SW2,SW3,SW4,SW5,SW6
Confidential - Do Not Copy
Q'ty
1
1
1
1
1
1
1
1
1
1
2
1
4
5
1
1
1
1
1
1
1
1
1
6
1
1
1
1
1
1
1
3
8
6
4
1
1
1
1
1
1
2
4
1
2
1
1
1
1
1
1
1
1
1
7
1
1
1
1
4
2
6
1
1
1
1
2
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
0.027
1
1
1
1
1
1
VA912-4_VA912b-4
8.
Exploded Diagram and Exploded Parts List
ViewSonic Corporation
Model
Title
Date
ViewSonic Corporation
58
Confidential - Do Not Copy
VA912-4_VA912b-4
Rev:
EXPLODED PARTS LIST (VA912-4)
ViewSonic Model Number: VS10867
Rev: 1b
Serial No. Prefix: PW7
Item
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
ViewSonic P/N
B-00004169
B-00003993
B-00004170
N/A
N/A
N/A
M-MS-0808-9244
M-MS-0808-9243
N/A
N/A
N/A
N/A
N/A
N/A
M-SCW-0824-6802
M-SCW-0824-0814
M-MS-0808-8986
N/A
CB-00002525
CB-00004173
E-00004177
N/A
M-MS-0808-9247
N/A
N/A
N/A
M-MS-0808-9411
N/A
N/A
N/A
N/A
HW-00004157
N/A
M-SCW-0824-6895
C-00005993
M-MS-0808-9815
M-SCW-0824-6797
N/A
N/A
E-00005995
N/A
N/A
N/A
N/A
M-LB-0813-0745
M-MS-0808-9682
ViewSonic Corporation
Ref. P/N
21L9TAMB090
AS05B312D00
23L9VABB003
EAL9VA01021
EBL9VA01013
EBW0VA02015
FEL7V004015
FEL7V003019
FCL7TA01018
FAL7TA08011
FAL9VA01012
FAL9VA02019
FCL7B001018
FCM7T004014
MM30040IBJ9
MM30060BBJ3
MBLI1004018
MS35080B456
DD0L9VLC015
DDL9VABU001
DN0TE200F00
FCL5M005011
EBL70023013
GAL7TA01016
EAL9VA02027
FBL9VA01013
FBL70008014
EAW0VA03029
EAW0VA05021
FAW0VA04017
FBW0VA02015
MF40140IJ29
DDL9TATH107
MF40080IBJ1
EBL9VA02028
GAL9V002014
MF40080BJ29
MM40100BL61
EAW0VA04025
AA90ME130B2
FBW0VA03011
GAW0VA03011
GAW0VA01018
HCL9VA01014
HCL7V002011
JXL9V001010
Description
L9ZC M/B ASSY(RTD2523b-LF) GP
ADP/INV,FSP043-2PI01 90~264V GP
L9VA BUTTON/B ASSY GP
LCD BEZEL L9VA S(EAL9VA01,R3A) GP
FUNCTION BUTTON L9VA GP
LENS W0VA GP
BIRD LOGO-10MM L7VC
LOGO FRONT-VSC-38MM L7VC
SHIELDING MYLAR L7TAGP
SHIELDING L9VA DUAL GP
LCD BKT-L L9VA GP
LCD BKT-R L9VA GP
POWER BOARD MYLAR L7B GP
AL FOIL M7T GP
SCREW M3.0*4.0-I(NI) GP
SCREW M3.0*6,B(NI) GP
IO NUT LI1 GP
SCREW F3.5*8-B(NI)(WASHER)
CABLE MB-LCD(30P,140MM)L9V-5 GP
CABLE MB-BUTTON(10P/10P,280MM)L9VA GP
SPEAK ASSY L9VA FG-TE200 1.5W*2 GP
AL FOIL(PANEL) L5M
WIRE MOUNTS L70L-E GP
RUBBER FOOT L7TA
LCD COVER L9VA B(EAL9VA02,R3A) GP
HINGE-PLATE L9VA GP
LOCK METAL L70B GP
STAND FRONT W0VA(EAW0VA03,R3A)BK GP
STAND-BACK W0VA(EAW0VA05,R3A)BK GP
HINGE ASSY W0VA GP
CONTACT-PLATE W0VA GP
SCREW F4.0*14-I(BNI) GP
CABLE STAND-HINGE(1P,150MM) GP
SCREW F4.0*8-I(NI) GP
HINGE COVER L9VA B(EBL9VA02,R3A) GP
RUBBER PLUG VESA L9V(GAL9V002,REV3A)
SCREW F4.0*8-B(BNI)GP
SCREW M4*10.0-B(BNI,NYLOK) GP
BASE W0VA(EAW0VA04,REV3A)BK GP
LCD(TFT)HSD 190ME13-A16(8MS) A GP
BASE-PLATE W0VA GP
RUBBER FOOT-C W0VA GP
RUBBER FOOT W0VA GP
ID LABEL L9VA GP
SERIAL LABAL L7V GP
LCD FILM L9V GP
59
Confidential - Do Not Copy
Q'ty
1
1
1
1
1
1
1
1
1
1
1
1
1
3
8
6
4
1
1
1
1
2
1
2
1
1
1
1
1
1
1
7
1
1
1
4
2
6
1
1
1
2
2
1
1
1
VA912-4_VA912b-4
EXPLODED PARTS LIST (VA912b-4)
ViewSonic Model Number: VS10867
Rev: 1b
Serial No. Prefix: PW8
Item
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
ViewSonic P/N
N/A
B-00003993
B-00004170
N/A
N/A
N/A
M-MS-0808-9244
M-MS-0808-9243
N/A
N/A
N/A
N/A
N/A
N/A
M-SCW-0824-6802
M-SCW-0824-0814
M-MS-0808-8986
N/A
CB-00002525
CB-00004173
E-00004177
N/A
M-MS-0808-9247
N/A
N/A
N/A
M-MS-0808-9411
N/A
N/A
N/A
N/A
HW-00004157
N/A
M-SCW-0824-6895
C-00005749
N/A
M-SCW-0824-6797
N/A
N/A
E-00005996
N/A
N/A
N/A
N/A
M-LB-0813-0745
M-MS-0808-9682
ViewSonic Corporation
Ref. P/N
21L9ZCMB038
AS05B312D00
23L9VABB003
EAL9VA01012
EBL9VA01013
EBW0VA02015
FEL7V004015
FEL7V003019
FCL7TA01018
FAL7TA08011
FAL9VA01012
FAL9VA02019
FCL7B001018
FCM7T004014
MM30040IBJ9
MM30060BBJ3
MBLI1004018
MS35080B456
DD0L9VLC015
DDL9VABU001
DN0TE200F00
FCL5M005011
EBL70023013
GAL7TA01016
EAL9VA02019
FBL9VA01013
FBL70008014
EAW0VA03011
EAW0VA05013
FAW0VA04017
FBW0VA02015
MF40140IJ29
DDL9TATH107
MF40080IBJ1
EBL9VA02010
GAW0VA02014
MF40080BJ29
MM40100BL61
EAW0VA04017
AA90ME130C1
FBW0VA03011
GAW0VA03011
GAW0VA01018
HCL9VA01014
HCL7V002011
JXL9V001010
Description
L9ZC M/B ASSY(RTD2523B-LF) GP
ADP/INV,FSP043-2PI01 90~264V GP
L9VA BUTTON/B ASSY GP
LCD BEZEL L9VA GP
FUNCTION BUTTON L9VA GP
LENS W0VA GP
BIRD LOGO-10MM L7VC
LOGO FRONT-VSC-38MM L7VC
SHIELDING MYLAR L7TAGP
SHIELDING L9VA DUAL GP
LCD BKT-L L9VA GP
LCD BKT-R L9VA GP
POWER BOARD MYLAR L7B GP
AL FOIL M7T GP
SCREW M3.0*4.0-I(NI) GP
SCREW M3.0*6,B(NI) GP
IO NUT LI1 GP
SCREW F3.5*8-B(NI)(WASHER)
CABLE MB-LCD(30P,140MM)L9V-5 GP
CABLE MB-BUTTON(10P/10P,280MM)L9VA GP
SPEAK ASSY L9VA FG-TE200 1.5W*2 GP
AL FOIL(PANEL) L5M
WIRE MOUNTS L70L-E GP
RUBBER FOOT L7TA
LCD COVER L9VA GP
HINGE-PLATE L9VA GP
LOCK METAL L70B GP
STAND-FRONT W0VA GP
STAND-BACK W0VA GP
HINGE ASSY W0VA GP
CONTACT-PLATE W0VA GP
SCREW F4.0*14-I(BNI) GP
CABLE STAND-HINGE(1P,150MM) GP
SCREW F4.0*8-I(NI) GP
HINGE COVER L9VA GP
RUBBER PLUG VESA W0VA GRAY GP
SCREW F4.0*8-B(BNI)GP
SCREW M4*10.0-B(BNI,NYLOK) GP
BASE W0VA GP
LCD(TFT)HSD 190ME13-A16(8MS) A GP
BASE-PLATE W0VA GP
RUBBER FOOT-C W0VA GP
RUBBER FOOT W0VA GP
ID LABEL L9VA GP
SERIAL LABAL L7V GP
LCD FILM L9V GP
60
Confidential - Do Not Copy
Q'ty
1
1
1
1
1
1
1
1
1
1
1
1
1
3
8
6
4
1
1
1
1
2
1
2
1
1
1
1
1
1
1
7
1
1
1
4
2
6
1
1
1
2
2
1
1
1
VA912-4_VA912b-4
Packing for Shipping
PACKING PART LIST ( VA912-4 )
ViewSonic Model Number: VS10867
Rev: 1a
Item
1
2
3
4
5
6
7
8
9
10
11
ViewSonic P/N
N/A
N/A
P-00004180
N/A
A-00003642
N/A
M-LB-0813-1042
M-MS-0808-9158
CB-00002602
CB-00004149
C-00004147
Ref. P/N
1L9VAHXVS88
HBL9VA010013
HBL9VA02010
HGL9V01018
DM33T181004
HCL9VA02013
HCL7V019011
HAL7V002019
DDL7VDPC005
DD0L0TPC007
38W0VABS010
Location
VA912 monitor
END CAP (L)
END CAP (R)
USER'S MANUAL & CD
POWER CORD 3P 1.8M
CARTON
CARTON LABEL
EPE BAG
VGA CABLE
AUDIO CABLE
Base assy
Q'ty
1
1
1
1
1
1
1
1
1
1
1
PACKING PART LIST ( VA912b-4 )
ViewSonic Model Number: VS10867
Rev: 1b
Item
1
2
3
4
5
6
7
8
9
10
11
ViewSonic Corporation
61
Confidential - Do Not Copy
VA912-4_VA912b-4
ViewSonic P/N
N/A
N/A
P-00004180
DC-00005994
A-PC-0106-0224
N/A
N/A
P-00004159
CB-00002602
CB-00004149
C-00004165
Ref. P/N
1L9VAHXVS02
HBL9VA010013
HBL9VA02010
HGL9VA01018
DM333181G97
HCL9VA01017
HCL7V0`19011
HAL0T002019
DDL7VDPC005
DD0L0TPC007
38W0VABS001
Location
VA912 monitor
END CAP (L)
END CAP (R)
USER'S MANUAL & CD
POWER CORD 3P 1.8M
CARTON
CARTON LABEL
PE BAG
VGA CABLE
AUDIO CABLE
Base assy
Q'ty
1
1
1
1
1
1
1
1
1
1
1
ViewSonic Corporation
62
EEPROM
24LC16
Crystal
11.0592MHZ
VGA IN
DVI IN
Digital
AG
AB
INV
ON/OFF
Volu
AC IN
Keypad
CSZ
IRQ
RST
24.576MHz
Mute
CPU
MTV312V64
STBY
Audio
TDA7496L
+12V
AR
HSYNC , VSYNC
DDC
EEPROM
24LC02
VBRI
+2.5V
Panel
Interface
Power Board
And Backlight
Control
Inverter
Host
Interface
Clock
Gen.
RTD2523
Triple ADC
Interface
+3.3V
Confidential - Do Not Copy
+5V
+12V
+5V
/
TX2+
TX3-
TX2-
TX1-
TX0-
AIC117ADJ
AIC117ADJ
BRIGHTNESS
Switch
AO3415
Clock + / Clock-
/
/
TX1+
TX3+
/
TX0+
+5V
+5V
POWER
19"
Panel
+2.5V
+3.3V
9. Block Diagram
Backlight
VA912-4_VA912b-4
10.
Schematic Diagrams
5DVCC
3
VCC12
2
1
E
2
R10
R6
330/6 1%
R8
0/6
10K/6
R13
1K/6
3DVCC
0.1u/6
+
1
+
0/6
3AVCC1
RTD 3DVCC
ADC_ 3AVCC
C3
EC2
10uF/16V
3DVCC
10uF/16V
R175
GND
FEB_0805
3DVCC
Q3
MMST3906
3DVCC
3DVCC_1
U1
AIC1117CY
3 VIN VOUT 2
VO 4
L32
EC3
C4
0.1u/6
R3
200/6 1%
2
4
6
8
C5
0.1u/6
FUSE1
0
1
EC1
330u/16V
R1,L1
12V
1
3
5
7
C1
0.1u/6
CONN 4x2-R
C6
220u/16V
CN1
C
5DVCC
3PVCC
RTD 3PVCC
LVDS_3AVCC
3AVCC2
VRMT
L3
U2
AIC1117CY
2 VIN VOUT 3
1
10K/6
GND
R14
TO252 package
10K/6/NC
U1與U'共同layout
3DVCC
1
C102
C11
0.1U/6
1U/6
2
R16
1K/6
4.7K/6
3
R18
SOT223 package
U3
AIC1117CY
3 VIN VOUT 2
VO 4
GND
1N4148
10uF/16V
DEL R173,R174; ADD D1
+
3DVCC NC/CX201209805/8
L27
D30
D31
DSUB_5V
VCPU
+
RTD 2.5DVCC
2.5DVCC
CX201209805/8
1N4148
L28
C100
0.1u/6
Q19
2
1
R143
4.7K/6
C101
NC/6
3
2
1N4148
Q18
MMBT3906
3
1
R17
200/6 1%
EC5
Modify
2.5DVCC
0/6
2.5DVCC_1
R176
C12
0.1u/6
1
D1
10uF/16V
VBRI
EC6
Q4
SN7002E
2
R15
200/6 1%
1U/8
1
C13
3DVCC
MMBT3906
R144
4.7K/6
3
2
1
4
5
4 3
5 2
1
3
2
1
4
5
9
8
7
6
43
52
1
9
8
7
6
4
5
9
8
7
6
3
2
1
9
8
7
6
3
2
1
9
8
7
6
9
8
7
6
4
5
9
8
7
6
4
5
1
1
1
1
3
2
1
9
8
7
6
3
2
1
For layout
4
5
ViewSonic Corporation
Model
POWER
Title
Date
ViewSonic Corporation
63
Confidential - Do Not Copy
VA912-4_VA912b-4
Rev:
PAGE1 VGA
INPUT
L8
FCB1608C-190T03/6
RED+IN
R24
DDC_SDA
75/6/F
RED-IN
11
13
IN-V
14
RED+IN
RED-IN
GREEN+IN
GREEN-IN
BLUE+IN
BLUE-IN
1
6
2
7
3
8
4
9
5
10
DDC_SDA 12
IN-H
DDC_SCL 15
L9
C16
0.047u/6
R25
100/6
C18
0.047u/6
RED+
RED-
FCB1608C-190T03/6
GREEN+IN
R26
100/6
C19
0.047u/6
R28
100/6
C21
0.047u/6
C22
0.047u/6
GREEN+
C20
R27
DSUB_5V
10pF
DSUB_5V
75/6/F
GREEN-IN
PIN 10 VGA_CON
17
VGA/NC
100/6
10pF
16
CN2
R23
C17
R29
100/6
GREENSOGIN
DDC_SCL
R30
1M/6
CN3
IN-H
DDC_SCL
+
+
+
+
+
+
+
+
+
+
+
+
+
+
L10
2
4
6
8
10
12
14
RED+IN
GREEN+IN
BLUE+IN
GND
IN-V
DDC_SDA
DSUB_5V
FCB1608C-190T03
BLUE+IN
R31
100/6
R33
100/6
C23
0.047u/6
BLUE+
C24
R32
10pF
75/6/F
BLUE-IN
NC/VGA INPUT
L31
IN-H
FCM1608C-300T06/6
R34
VGAHS
R35
C26
2K/6
22P/6
0.047u/6
BLUE-
AHS
D34
Z3.3V
3
2
D9
DAN217K
GREEN+IN 3
BLUE+IN
R36
IN-V
3
100/6
VGAVS
R37
C28
2K/6
22P/6
AVS
2
D8
DAN217K
D35
Z3.3V
1
1
1
1
RED+IN
2
D7
DAN217K
2
1
ADC_VCC
100/6
C25
2
1
3
5
7
9
11
13
RED-IN
GREEN-IN
BLUE-IN
GND
3DVCC
2
1
1
1
C29
CN4
R44
2K/6
U5
2
2
Z5.6
0
0
R159
R160
0
0
R161
R162
0
0
TX1TX1+
1
Z5.6/NC
R157
R158
R46
100/6
R47
100/6
DDC2_SCL
DDC2_SDA
D23
D22
1
17
18
19
20
21
22
23
24
Z5.6
R45
2K/6
M24LC02
2
RX0RX0+
GND
RX5RX5+
GND
RXC+
RXC-
TX2TX2+
VCC
VCLK
SCK
SDA
D19
D18
DDC2_SCL
DDC2_SDA
0
0
NC
NC
NC
VSS
8
7
6
5
Z5.6/NC
D21
D20
Bus_Power
R48
Z5.6
Z5.6
10K/6
1
9
10
11
12
13
14
15
16
2
RX1RX1+
GND
RX3RX3+
5V
GND
HP
R155
R156
1
1
2
3
4
5
6
7
8
TX0TX0+
TXC+
TXC-
2
2
C30
0.1U/6
D26
D25
D28
D27
Z5.6
Z5.6
Z5.6
Z5.6
ViewSonic Corporation
1
1
1
1
1
26
Z5.6
2
D24
C31
1U/6NC
2
2
1
RX2RX2+
GND
RX4RX4+
SCL
SDA
VS
1
2
3
4
2
25
0.1U/6
2
2
2
1
BAT54C-GS08
Z5.6
Z5.6
Z5.6
Z5.6
3DVCC
D17
D13
D12
D11
D10
Bus_Power
DDC_SCL
2
DDC_SDA
1
IN-V
IN-H
DVI-D/NC
Model
VGA AND DVI INPUT
Title
Date
ViewSonic Corporation
64
Confidential - Do Not Copy
VA912-4_VA912b-4
Rev:
3DVCC
R3DVCC
B+
BSOG
G+
GR+
R-
BLUE+
BLUESOGIN
GREEN+
GREENRED+
RED-
B+
BSOG/ADC_TEST
G+
35 G37 R+
38 R-
30
31
33
34
27
32
39
40
ADC_GND
C43.C44.C45盡量靠近IC
AHS
AVS
AHS
AVS
ADC_GND
ADC_GND
ADC_GND
ADC_GND
42 AHS
43 AVS
TCON[11]/V[0]
TCON[10]/V[1]
TCON[9]/V[2]
TCON[8]/V[3]
TCON[7]/V[4]
TCON[6]/V[5]
TCON[5]/V[6]
TCON[1]/V[7]
TCON[0]/VCLK
28 ADC_REFIO
114
115
116
117
118
119
122
123
124
0.1u/6
DDCSDA
DDCSCL
DDCSDA2
DDCSCL2
C64
125
126
C63
0.1u/6
C62
0.1u/6
C61
0.1u/6
C59
22uF/16V
C60
0.1u/6
C45
0.1u/6
C46
10uF/16V
VBRI
VOLUME
PANEL_5_12VCC
L22
L21
NC
108
107
106
105
104
103
102
101
100
99
Q8 SI2301DS
1
R67
PANEL_5_12VCC
3
C67
R68
C69
C70
10K/6
0.1U/6
100U/16V
2
C68
2200P/6
2200P/6
BG3N
BG3P
BCLKN
BCLKP
BB1N
BB1P
BB2N
BB2P
BB3N
BB3P
68
67
66
65
64
63
62
61
60
59
AG3N/TEAN
AG3P/TEAP
ACLKN/TEBN
ACLKP/TEBP
AB1N/TECN
AB1P/TECP
AB2N/TECLKN
AB2P/TECLKP
AB3N/TEDN
AB3P/TEDP
94
93
92
91
90
89
88
87
86
85
BR1N/TOAN
BR1P/TOAP
BR2N/TOBN
BR2P/TOBP
BR3N/TOCN
BR3P/TOCP
BG1N/TOCLKN
BG1P/TOCLKP
BG2N/TODN
BG2P/TODP
82
81
80
79
78
77
76
75
74
73
R70
D 3
82K/6 Q9
3
RTD2523
29 ADC_VDD
36 ADC_VDD
41 ADC_VDD
L19 FEB_0805
+
TMDS_VDD
TMDS_VDD
TMDS_VDD
TMDS_VDD
TMDS_GND
TMDS_GND
TMDS_GND
TMDS_GND
47
46
ADC_VCC
11
13
19
26
10
16
22
25
VCC12
82K/6
111
56
3AVCC1
3AVCC1
C58
0.1u/6
22uF/16V
C57
0.1u/6
0.1u/6
C53 +
Near to Chip
C56
0.1u/6
L15 FEB_0805
C54
RX2P
RX2N
RX1P
RX1N
RX0P
RX0N
RXCP
RXCN
TMDS_TST/PWM1
EXT_RES
RX2P
RX2N
RX1P
RX1N
RX0P
RX0N
RXCP
RXCN
SCLK
SDIO[0]
TCON[4]/SDIO[1]
TCON[3]/SDIO2]
TCON[2]/SDIO[3]/PWM2
SCSB
RESET#
TMDS_AVCC
C55
0.1u/6
3AVCC2
1K/6
TX2+
TX2TX1+
TX1TX0+
TX0TXC+
TXC-
9
12
14
15
17
18
20
21
23
24
113
112
55
FEB_1206
2.5V Ground 128
2.5V Ground 97
2.5V Ground 70
2.5V Ground 44
121
110
95
83
71
58
49
127
98
69
45
2.5V Power
2.5V Power
2.5V Power
2.5V Power
TCON[12]/COUT/PWM2
PWM0/REFCLK
TCON[13]/COUT/PWM2
AR1N
AR1P/TCON[0]
AR2N/TCON[1]
AR2P/TCON[5]
AR3N/TCON[6]
AR3P/TCON[7]
AG1N/TCON[8]
AG1P/TCON[9]
AG2N/TCON[10]
AG2P/TCON[11]
50
54
53
52
51
R55
4.7K/6/NC
3AVCC2
4.7K/6
C44
0.1u/6
C42
0.1u/6
C43
0.1u/6
C41
0.1u/6
C39
0.1u/6
C40
0.1u/6
C37
0.1u/6
C38
0.1u/6
C36
0.1u/6
DPLL_VDD
APLL_VDD
DPLL_GND
APLL_GND
5DVCC
TMDS_AVCC
R58
0.1u/6
5DVCC
6 PLL_TEST1
7 PLL_TEST2
PLL_GND
R56
C47
DTC144EUA
G
2
2
1 S
PANEL_PW12
RXEIN0RXEIN0+
RXEIN1RXEIN1+
RXEIN2RXEIN2+
RXECKINRXECKIN+
RXEIN3RXEIN3+
1
10uF/16V
1 XO
2 XI
4
5
3
8
C52
0.1u/6
C51
0.1u/6
C49
0.1u/6
R54
4.7K/6
C50 +
C35
0.1u/6
C34
10uF/16V
U6
XI
3.3V Power
3.3V Power
3.3V Power
3.3V Power
3.3V Power
3.3V Power
3.3V Power
R53
NC
22pF/6
120
109
96
84
72
57
48
C48
L14 FEB_0805
NC
2.5DVCC
XO
3.3V Ground
3.3V Ground
3.3V Ground
3.3V Ground
3.3V Ground
3.3V Ground
3.3V Ground
22pF/6
Y1
24.576MHz
C33
XO
XI
R57
L13 FEB_0805
2.5DVCC
FEB_0805
3PVCC
3PVCC
R2.5DVCC
L12
3DVCC
GND
CN5
RXOIN0RXOIN0+
RXOIN1RXOIN1+
RXOIN2RXOIN2+
RXOCKINRXOCKIN+
RXOIN3RXOIN3+
RXEIN0RXEIN1RXEIN2DGND
RXECKINRXEIN3RXOIN0DGND
RXOIN1RXOIN2RXOCKINRXOIN30/6
1
3
5
7
9
11
13
15
17
19
21
23
R177
25
DGND
27
PANEL_5_12VCC 29
1
3
5
7
9
11
13
15
17
19
21
23
25
27
29
2
4
6
8
10
12
14
16
18
20
22
24
26
28
30
2
4
6
8
10
12
14
16
18
20
22
24
26
28
30
RXEIN0+
RXEIN1+
RXEIN2+
DGND
RXECKIN+
RXEIN3+
RXOIN0+
DGND
RXOIN1+
RXOIN2+
RXOCKIN+
RXOIN3+
R178
0/6
DGND
PANEL_5_12VCC
PANEL_5_12VCC
1841 30P
RTD_SCLK
RTD_SDO/SDI
SDIO1
SDIO2
SDIO3
RTD_SCSB
RESET
DDC_SDA
DDC_SCL
R66
100/6 R71
R72
NC
NC
ViewSonic Corporation
Model
RTD2523
Title
Date
ViewSonic Corporation
65
Confidential - Do Not Copy
VA912-4_VA912b-4
Rev:
3DVCC
Reset circuit
VCPU
C
3DVCC
R79
R78
R165
NC/100K/6
1
10K/6
Q20
Q12
LED_G
R82
4.7K/6
2N3906
2
3DVCC
VCPU
R106
NC/82K/6
3AVCC1
R147
4.7K/6
R85
33K/6
R84
33K/6
R91
33K/6
3
C86
NC/1U/16V
3AVCC1
2
2N3906
R90
33K/6
4.7K/6
R89
33K/6
R93
LED_R
R88
33K/6
3
Q13
R87
33K/6
NC/2N3906
1
2
C103
NC/1U/16V
E
1
NC/ 1N4148
B
10K/6
3
D32
CN6
R95
R96
R97
R98
R99
R100
R101
R102
R103
MENU
SEL
PWR
DOWN
UP
RIGHT
LEFT
VCPU
10
9
8
7
6
5
4
3
2
1
C81
0.1U/6
C82
0.1U/6
C80
0.1U/6
C79
0.1U/6
90° E&T
4607-11Pin
4501-10-10P-R
TO BUTTON BOARD
3
C78
0.1U/6
Junction from
A change to B
0.1u/6
C77
0.1U/6
22uF/16V
NC/DAN202U
1K/6
1K/6
1K/6
1K/6
1K/6
1K/6
1K/6
220/6
220/6
C85
+ C84
D33
C76
0.1U/6
2
1
RESET
R166
0/6
less R94 to CN6 pin 11
R101,R103 net swap
VCPU
R163
VCPU
I1
VCPU
C88
10pF/6
11
1
7
2
C75
R80
0.1U/6
R81
R179
U8
1
2
3
4
VCPU
A0
A1
A2
VSS
VCC
WP
SCK
SI
2K/6
8
7
6
5
24LC16
2K/6
2K/6
WP_EE
R83
100/6
R92
100/6
R180
PARAMETER
EEPROM
KEY1
R142
19
NC
IICSCL
IICSDA
LED_R
LED_G
PANEL_PW12
MUTE
NC
STBY
KEY2
KEY3
PWR_SEL
14
13
27
26
16
9
30
31
32
33
VCPU
MTV312M64
VSS
12
Y2
11.0592MHz
P5.0
P5.1
P5.2
X1
P5.3
P5.4
P5.5
X2
P5.6
DA8/HLFHO
RESET
DA9/HALFV
P1.0
P1.1
P1.2
INT0/P3.2
P1.3
P1.4
ISCL/P3.5/T1
P1.5
ISDA/P3.4/T0
P1.6
P6.0/AD0
P1.7
P6.1/AD1
DA7
P6.2
P4.0
P6.3
P4.1
P4.2
P6.4
P6.5
P3.1/TXD
P6.6
P3.0/RXD
P6.7
R164
VCPU
22
3
2
1
42
41
40
34
39
38
17
18
20
21
22
23
24
25
35
36
37
15
R39
R40
R181
22
AVS
MENU
SEL
PWR
UP
DOWN
RIGHT
LEFT
4.7K/6
4.7K/6
R110
R111
4.7K/6 4.7K/6
WP_EE
R112
R113 R114
NC
NC 4.7K/6 4.7K/6
R115
VRMT
SDIO1
SDIO2
SDIO3
RTD_SCLK
RTD_SCSB
VCPU
R124
R125
28
29
100/6
100/6
10
10pF/6
NC
NC
VDD3
VCC
HSYNC
VSYNC
C87
6
5
4
8
43
44
4.7K/6
R109
R108
VCC12
JP1
TxD
RxD
DDC_SDA
DDC_SCL
4.7K/6
4.7K/6
5DVCC
1
2
3
4
HEADER 4
R170
4.7K/6
R171
4.7K/6
R172
4.7K/6
KEY1
KEY2
KEY3
R41
6.8K/6
6
2
R38
2K/6
KEY2
4
KEY1
5
3
1
JP3
KEY3
2004/12/28
2004/12/28
ViewSonic Corporation
Model
MCU & BUTTON
Title
Date
ViewSonic Corporation
66
Confidential - Do Not Copy
VA912-4_VA912b-4
Rev:
VCC12
R128
1K/6
VOL
10K/6
1U/8
3.9K/6
R130
R131
C89
1
Q15
2
VOLUME
10K/6
SN7002E
3
R129
3
C
AGND
B 2
1
VCC12
E
L24
BEAD/1206
PC AUDIO-IN
C91
C90
330U/16V
L25 600/CX601T02001
2 Z0415
1
Z0412
L_LINE
R132
100/6
C92
LIN_PC
0.47U/8
4
AGND
VS
1
5
4
3
2
ZD005D100
VS
J3
15
U9
16
0.1U/6
INL
OUTL
R_LINE
2 Z0416 R133
1
L26 600/CX601T02001
C94
RIN_PC
100/6
0.47U/8
9
INR
VAROUT_L
17
C93
SPKOUTL
330U/16V
5
JP2
VCC12
R136
20K/6
R135
20K/6
C96
220P/6
6
7
R137
VOL
CX201209805/8
R138
10K/6
R139
1
2
3
4
4606-04-04P-R
10K/6
11
STBY
VAROUR_R
12
MUTE
OUTR
10
SVR
AGND
14
C97
SPEAKER OUT
SPKOUTR
330U/16V
Q16
2
TDA7496L
AGND
L23 BEAD/1206
1
DTC144EUA
GND
GND
GND
GND
GND
GND
GND
MUTE
C99
330U/16V
MUTE
C98
0.1U/8
3
AGND
VOLUME
CX201209805/8
1
2
3
13
18
19
20
C95
220P/6
R134
VCC12
AGND
AGND
10K/6
R141
10K/6
3
R140
AGND
STBY
STBY
Q17
2
DTC144EUA
1
ViewSonic Corporation
AGND
Model
AUDIO
Title
Date
ViewSonic Corporation
67
Confidential - Do Not Copy
VA912-4_VA912b-4
Rev:
11. PCB Layout Diagrams
MB TOP
ViewSonic Corporation
68
Confidential - Do Not Copy
VA912-4_VA912b-4
ViewSonic Corporation
69
Confidential - Do Not Copy
VA912-4_VA912b-4
ViewSonic Corporation
70
Confidential - Do Not Copy
VA912-4_VA912b-4
ViewSonic Corporation
71
Confidential - Do Not Copy
VA912-4_VA912b-4
* Reader’s Response*
Dear Readers:
Thank you in advance for your feedback on our Service Manual, which allows continuous improvement
of our products. We would appreciate your completion of the Assessment Matrix below, for return to
ViewSonic Corporation.
Assessment
A. What do you think about the content of this Service Manual?
Unit
Excellent
Good
Fair
Bad
1. Precautions and Safety Notices
2. Specification
3. Front Panel Function Control Description
4. Circuit Description
5. Adjustment Procedure
6. Troubleshooting Flow Chart
7. Recommended Spare Parts List
8. Exploded Diagram and Exploded Parts List
9. Block Diagrams
10. Schematic Diagrams
11.PCB Layout Diagrams
B.
Are you satisfied with this Service Manual?
Item
Excellent
Good
Fair
Bad
1. Service Manual Content
2. Service Manual Layout
3. The form and listing
C. Do you have any other opinions or suggestions regarding this service manual?
Reader’s basic dada:
Name:
Title:
Company:
Add:
Tel:
Fax:
E-mail:
After completing this form, please return it to ViewSonic Quality Assurance in the USA at facsimile
1-909-839-7943. You may also e-mail any suggestions to the Director, Quality Systems & Processes
(marc.maupin@viewsonic.com)
ViewSonic Corporation
72
Confidential - Do Not Copy
VA912-4_VA912b-4
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising