Lone Star College WNSP Dual Projection Classrooms Operation The operation of the Dual Projection classrooms has a very intuitive user interface using an iPad. Unlike most other iPad applications that require the iPad to go to sleep after a set amount of time, the TEKVOX iPad application is controlled by the motion sensor in the room. This allows the iPad to stay active all of the time making for a fast user setup. On other systems the iPad must be activated by several button pushes. When motion is no longer detected, the iPad will go to a black screen saving the backlight of the iPad. Once motion is detected, the iPad will wake up and go to its Logo screen if the system is off or to the Main screen if the system is on. Touching the Logo screen displays the System On popup. Press “Yes” to turn on the system. This will not turn on the projectors. Selecting a source and sending it to a projector will turn on the projector. Logo Screen When the System is on, the iPad displays its Main screen. The iPad screens are designed for both landscape and portrait view. The Main screen has four main areas: 1. Source Selection (Left) 2. Operational Controls (Right) 3. Device Controls (Center) 4. Send to Selection (Bottom) Landscape View Main Screen Protriate View Main Screen Contact us for additional information or to find an Authorized TEKVOX Dealer in your area. 11831 Radium Street, San Antonio, TX 78216 | 210.348.6565 o | 713.490.3135 f | [email protected] | www.TEKVOX.com Lone Star College WNSP Dual Projection Classrooms Source Selection Source selection is made by selecting a button on the left. These buttons allow previewing the source before sending it to a display. This can be done as long as View PC is not on. The PC, Laptop and Document Camera have no controls associated with them. The DVD and VCR will display their control buttons. When a Source selection button is on, the selected source can be sent to a display by pressing a Send button located at the bottom of the screen. If the display is not on, it will power on. Sources can be selected to display on separate display. The PC can be on the Left display while the Document Camera is on the Right. Note that Laptop VGA, DVD and VCR cannot be sent to separate display together. You cannot have the Laptop VGA and DVD on separate screens. Pressing the “None” button allows muting the individual displays or the audio. Contact us for additional information or to find an Authorized TEKVOX Dealer in your area. 11831 Radium Street, San Antonio, TX 78216 | 210.348.6565 o | 713.490.3135 f | [email protected]OX.com | www.TEKVOX.com Lone Star College WNSP Dual Projection Classrooms Operational Controls These controls are located on the right and allow for system operation. They include: System Off Help Display Volume View PC System Off Pressing System Off displays the System Off popup allowing for confirmation before shutting down the system. Help The button gives the user information on whom to contact or to send an Email to the Help Desk. Display Selecting Display allows for more advanced control options of the display. From here the user can power on and off, Mute and Freeze Volume Pressing the Volume button displays the Volume popup and allows for control of Program audio (PC, Laptop, DVD and VCR). There is also a Speech volume for control of the microphone level. View PC By default the podium monitor is used as a confidence monitor. This can be changed to keep it on the PC by pressing the View PC button at bottom right. Contact us for additional information or to find an Authorized TEKVOX Dealer in your area. 11831 Radium Street, San Antonio, TX 78216 | 210.348.6565 o | 713.490.3135 f | [email protected] | www.TEKVOX.com Lone Star College WNSP Dual Projection Classrooms System A small mini controller is provided to control the system and create an interface to the iPad. The TEK 2s provide for the control of the projectors and other functions of the system. The left TEK 2 is the main unit and it provides for the occupancy control. The TEK MHD44TP is a unique HDMI matrix switcher with HDBaseT and audio outputs. This matrix switcher is used to route inputs to the different displays and to the audio system. Since users still need VGA for their laptops, the new TEKHD41V is used. This unit adds the ability to allow for both HDMI and VGA connections at the table top cubby (TSC7). For audio control the TEK PA2B is used to control both Program and Mic volume. This small unit is RS-232 controlled, has a 20 Watt stereo amplifier with loop out to daisy chain other amplifiers. The TEKVOX TEKVOX Dual Display Drop-In system cosist of the following equipment: 71022-DI-IPAD-A Includes: Includes 2 (TEK 2, Pwr Supply, TekSecurity+78006, 2 TEK CB1-A, TEK TPHD402PR), TEK-HD41V , TEK TSC7, TEK MHD44TP Switcher, TEK PA2B, SR Occ Sensor, cables and iPad Software and controller. To simplify the installation each projector has a TEK CB1-A drop-in ceiling box installed next to it. This unique Plenum rated ceiling box has the TEK 2 and receiver alreay mounted in the box, and supplies 110V power, HDMI and the TekSecurity control connections below the ceiling. No need for any costly Plenum rated cables to the projector. Contact us for additional information or to find an Authorized TEKVOX Dealer in your area. 11831 Radium Street, San Antonio, TX 78216 | 210.348.6565 o | 713.490.3135 f | [email protected] | www.TEKVOX.com
* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project
advertisement
© 2021