Quick Start Guide

Quick Start Guide
All in One Kit
Quick Start Guide
SDE-4003/5003
CONNECTING WITH OTHER DEVICES
Broadband Modem
Local PC
CH2
CH3
CH4
AUDIO IN
1
2
3
4
6
5
7
AUDIO OUT
9
10
11
12
13
14
※※ If you do not use the Internet, just follow the steps below:
1
SPOT
8
1
VIDEO IN
CH1
VIDEO IN
Broadband
Router or HUB
2
4
5
6
7
※※ uPnP Port Forwarding ( in case your router supports it)
15
16
8
COM COM
2
ALARM
OUT
RS485
SERIAL
10
11
8
9-2
10
17
19
27
1
8
9-1
10
16
18
27
1
8
9-1
10
16
18*
27
※※ Manual Port Forwarding (18*:Refer to Router Guide in “18”)
15 16 G
VIDEO OUT
1
※※ Port Forwarding using Free PC program
ALARM IN
English-1
12
DC 12 V
VGA OUT
1 2 3 4 5 6 7 8 G 9 10 11 12 13 14
13
CONSOLE
14
NETWORK
15
25
CH2
CH3
CH4
CH2
CH3
CH4
VIDEO IN
CH1
1
2
3
5
4
6
7
SPOT
8
1
AUDIO OUT
9
10
11
12
13
14
15
16
COM COM
2
ALARM
OUT
RS485
ALARM IN
SERIAL
VIDEO OUT
CONSOLE
1
2
AUDIO OUT
9
6
13
7
14
SPOT
8
15
16
1
COM COM
2
ALARM
OUT
RS485
1 2 3 4 5 6 7 8 G 9 10 11 12 13 14
ALARM IN
DC 12 V
VGA OUT
15 16 G
VIDEO OUT
SERIAL
CONSOLE
NETWORK
Older VGA cables or non-standard VGA cables may not have the
proper pins to auto detect the VGA monitor when connected to the
DVR. This may cause the video screen to function improperly.
Please use the instructions below to set the DVR monitor output to
VGA mode.
VIDEO IN
CH4
5
12
Notification
3
4
6
5
7
SPOT
8
1
VIDEO IN
CH2
4
11
DC 12 V
Connect the Video and Audio Out connectors to the monitor.
Connect mouse to the USB port.
For a PC monitor, use the VGA connector for the connection.
AUDIO IN
3
10
NETWORK
TO CAMERA SIDE ONLY
CH3
2
9
15 16 G
TO DVR SIDE ONLY
CH1
1
AUDIO OUT
DC 12 V
VGA OUT
1 2 3 4 5 6 7 8 G 9 10 11 12 13 14
VIDEO IN
CH1
AUDIO IN
AUDIO IN
2
Connect the DC adaptor.
Connect the camera to the Camera In port.
VIDEO IN
1
4
VIDEO IN
Installation
10
11
12
13
14
15
16
COM COM
2
ALARM
OUT
RS485
ALARM IN
DC 12 V
VGA OUT
1 2 3 4 5 6 7 8 G 9 10 11 12 13 14
SERIAL
CONSOLE
NETWORK
✔✔ Solution
VGA
VGA
1. Remote control does not function as expected.
3. The system menu may seem frozen and the DVR buttons may
not work.
VIDEO OUT
VIDEO IN
Your unit may experience a problem when non-standard VGA cable
or VGA monitor is connected to the DVR. Below are the symptoms
you may experience with your DVR.
2. Cameras will be in sequence mode on the monitor continuously.
15 16 G
VIDEO OUT
✔✔ Symptom
1. Connect the VGA monitor to the DVR using the VGA cable.
AUDIO OUT
2. Make sure the DVR is powered ON.
3. Insert the batteries to the DVR remote control.
CH1
CH2
CH3
CH4
AUDIO IN
VIDEO IN
Connect the LAN cable.
The default connection for use of the Internet is as follows:
You can connect a USB HDD, USB memory or mouse to the
USB port.
1
2
3
4
6
5
7
SPOT
8
VIDEO IN
3
AUDIO OUT
9
10
11
12
13
14
15
16
1
COM COM
2
ALARM
OUT
RS485
1 2 3 4 5 6 7 8 G 9 10 11 12 13 14
ALARM IN
VIDEO OUT
4. Face the remote control towards the DVR and press the
buttons on the remote control in sequence below. Make sure to
press the buttons quickly.
5. You should be able to see and control the DVR menu using
your mouse connected to the DVR.
Press the remote control buttons in the following sequence.
SERIAL
CONSOLE
a FREEZE
c
DC 12 V
VGA OUT
15 16 G
b VIEW
NETWORK
c RETURN
NETWORK
a
b
Broadband
Router or HUB
Local PC
``
Broadband
Modem
a
Connect the modem to the WAN port of the router and connect
each of the PC and the set to the LAN port.
b
b
English-2
c
c
a
Starting Up
5-1
8
Use the mouse to adjust the time setting.
In Live mode, click <Login> in the right-click menu.
Use the virtual keyboard to enter the password (default:
4321) in the PASSWORD input box.
Date/Time/Language
Date/Time/Language
Holiday
 Date2012-01-01
YYYY-MM-DD
 Time
24 Hours
08:14:24
 Time ZoneGMT
2012-01-01 01:10:25
 Time Sync.
Setup
 DST
 Language
Dec First (Sun) 0
Dec First (Sun) 0
English
Login
 IDadmin
OK
Cancel
 Password
OK
5-2
``
``
Cancel
9-1
All operations can be controlled with the mouse.
ģģ Using Virtual Keyboard
1. Use the direction buttons ($%_+) to move to a desired
character and press the [ENTER] button.
2. Use the <
ģģ Select <Connection Mode> in <Network> menu.
For Port Forwarding Setting
Sets the Connection type to <Static IP> and enter the IP
address. Click the <OK> button.
Connection Mode
Connection
> button to erase the previous character.
3. Use the <
To apply your setting click the <OK> button.
 Connection Mode
> button to toggle the letter case.
4. Complete your input and when done, click <OK> to close
the virtual keyboard.
Protocol
Static IP
 Bandwidth
2Mbps
 IP
192.168. 1.200
 Gateway
192.168. 1.
 Subnet Mask
255.255.255. 0
 DNS
Manual
``
`1234567890- = 
q w e
r
t
y
u
i
o p [ ] \
Del
a
s
d
f
g
h
j
k
l;‘
Caps Lock
z
x
c
v
b
n m ,./Shift
Space
6
7
OK
Ctrl
Cancel
9-2
Press the [MENU] button on the remote control.
168.126. 63. 1
OK
Cancel
If using DI-624 manufactured by D-link
IP ADDRESS:192.168.1.200/
GATEWAY: 192.168.1.1 / SUBNET MASK: 255.255.255.0 /
1ST DNS SERVER: 168.126.63.1 / 2ND DNS SERVER: 168.126.63.2
For uP&P Setting
Sets the Connection type to <Dynamic IP>. Click the <OK>
button.
Connection Mode
Connection
Select <Date/Time/Language> in <System> menu.
Logout
1
 Connection Mode
Protocol
Dynamic IP
 Bandwidth
2Mbps
 IP
192.168. 1.200
 Gateway
192.168. 1.
 Subnet Mask
255.255.255. 0
 DNS
Manual
1
168.126. 63. 1
Return
System
Date/Time/Language
Permission Management
System Management
Log Information
English-3
OK
Cancel
Rec & Play
10
11
14-1
Press the [MENU] button on the remote control.
Use the left/right button (_ +) to select <Record>.
Record menu is selected.
Use the up/down buttons (▲▼) to move to <Recording
Schedule>, and press [ENTER] button.
Select a desired date in the calendar, and a desired timeline in
the Time bar, and press the <Play> button if you want to
watch the recorded video.
Time Search
2012-01-01
Zoom Out
Data
CAM 01
CAM 02
CAM 03
2012/01/01 00:01:17
CAM 04
CAM 05
StandardSchedule
CAM 06
MotionEtc
CAM 07
V.Loss
Previous/Next Page
14-2
CH1
All
Zoom In
All
``
Recording Schedule
Go to Last
00:01
Set each of the Record Schedule options.
To change the setting, set the channel then select the time
and date you when want to record.
Press the [ENTER] button while the cells are selected.
The record type will cycle through <No Recording><Continuous>-<Event>-<Both(Cont&Evnt)>.
The default is as shown below.
Go to First
Overlapped Data List1
0001 020304 050607080910 11121314151617181920212223
Sun
Mon
Tue
Wed
Thu
Play
Return
The colored line indicates types of the recording data.
If you want to play a time specific data, enter an exact time.
If you have set the event recording, you can play a desired
scene using the <Event Search> function.
Set a desired date in the calendar and the result will be listed
on the table.
Select one you desired and press the <Play> button.
Fri
Sat
Event Search
Hol
No Recording
Continuous
Apply to All CH
Event
CAM 01
Both(Cont&Evnt)
2012-01-01
12
OK
Overlapped Data List1
Cancel
To change the record quality & resolution, select
<REC Quality & Resolution>.
If you change the setting of the resolution and the remaining
rate, the remaining count shows each available resolution.
Standard
Event
Remaining count : 4CIF(L) : 8
CH
1
2CIF(M) : 16
Resolution 
CIF(S)
CIF(S) : 32
Record Rate 
7fps

Record Quality 
CIF(S)

7fps
Level4

CIF(S)

7fps
Level4

4
CIF(S)

7fps
Level4

5
CIF(S)

7fps
Level4

CIF(S)
7fps

Date/Time Preview
3
02:47:54 ~ 02:48:59
Motion
2
00:39:06 ~ 00:40:30
Motion
1
00:01:22 ~ 00:02:28
Motion
Event
Previous/Next Page
Play
Return
You can change the play speed or channel, or stop the
playback using the onscreen button bar.
Level4

2
3
6
Go to Last
No.
2012/01/01 00:01:22
15
REC Quality & Resolution
Go to First
2012-01-01 01:10:25
Level4

7
CIF(S)

7fps
Level4

8
CIF(S)

7fps
Level4

Previous/Next Page
SYSTEM
NTSC
PAL
13
OK
Cancel
RECORD SIZE
CIF 352 × 240
2CIF 704 × 240
4CIF 704 × 480
CIF 352 x 288
2CIF 704 x 288
4CIF 704 x 576
POSSIBLE FPS
REC
OFF, 1~30
OFF, 1~25
In Live mode, click <Search> in the right-click menu.
English-4
Router & Network
Set Up
16
ĜĜ If you want to set port forwarding manually, refer to “Router Guide”.
18-1
In case of Port Forwarding Setting
Download the program.
Install it in your PC.
Run <Simple Port Forwarding>
(http://www.simpleportforwarding.com/download)
18-2
Click <(2)Do it now> in Check List
The following is configuration for the Internet connection.
This is a typical example.
192.168.1.1
Broadband Router or HUB
Cable/ADSL Modem
or
Internet
DDNS Server
(www.samsungipolis.com)
Direct LAN (Fixed/Static IP)
a
Type your router information.
DVR
192.168.1.200
Local PC
192.168.1.9
d
b
Path: <Network>  <Connection Mode>  <Protocol>
HTTP: 80 / Port(TCP): 4250~4254
18-3
Connection Mode
Connection
Protocol
 Protocol Type
TCP
 Port(TCP)
4250~
4254
 Port(UDP)
If you can’t find the exact router in the list, update the router
list or choose a similar router in the same manufacturer.
Click the icon for checking your router IP address.
8000 ~ 8160
 Unicast/Multicast
Unicast
 Multicast IP
224.126.63.1
 TTL
 Webviewer Port
c
5
a
80
* Multi Browser Support :
TCP Port 4505~4530, Webviewer Port 80
17
OK
Click <OK> for updating your router IP address.
Cancel
In case your router supports uPnP Port Forwarding
DDNS
 DDNS Site
iPOLIS
 Server Name
www.samsumgip...
 Product ID
HOMEDVR
 Quick Connect
 DDNS Host Address
b
Not UseUse
http://www.samsungipolis.com/HOMEDVR
OK
Type your router Username & Password.
If you haven’t changed them, skip this procedure, for it
provides default value.
Cancel
c
1. Select <iPOLiS> for DDNS Site.
2. Type your set ID in <Product ID> field.
More specific information in <iPOLiS DDNS Setting> in
page 6.
3. Select <Use> in <Quick Connect> menu.
4. After finishing <iPOLiS DDNS Setting> in page 6, you
can connect your DVR set with the address
<http://www.samsungipolis.com/HOMEDVR>
English-5
18-4
Click <(4)Do it now> in Check List for choosing the ports.
a
iPOLiS DDNS Setting
19-1
Visit http://www.samsungipolis.com or
http://www.samsungipolis.co.kr and click <LOGIN>.
19-2
If you have ID & PASSWORD, insert them.
Otherwise, click <SIGN UP> for a new account.
19-3
After log in, register your set with your information.
b
Type your DVR network setting.
IP Address : 192.168.1.200
Type : TCP
Start Port : 80
End Port : 80
c
d
a
IP Address : 192.168.1.200
Type : TCP
Start Port : 4520~4524
End Port : 4520~4524
g
b
e
c
f
18-5
After checking if the list is right, click <(5)Do it now> for
updating your router.
a
19-4
After registration, you can see the list as below.
19-5
Select <iPOLiS> and fill Server Name out with your
registration information.
DDNS
 DDNS Site
iPOLIS
 Server Name
www.samsumgip...
 Product ID
SDE5003HOME
 Quick Connect
 DDNS Host Address
Not UseUse
http://www.samsungipolis.com/SDE5003HOME
19-6
English-6
OK
Cancel
You can see <STATUS> changed to <ON> in 10 minutes, if
all the network settings are right.
Web Browsing
20
Double-click the [Silverlight.pkg] icon to display the Silverlight
plug-in installation screen as shown.
In the address bar of Web Browser, enter the Set IP.
For the internal network, enter the Set Local IP and for the
external network, enter the DDNS address.
* Refer to DDNS Host Address defined in DDNS Menu.
Ex) http://www.samsungipolis.com/HOMEDVR
Click [Continue] to start installing Silverlight plug-in. When
done, you will see the screen as below.
http://www.samsungipolis.com/HOMEDVR
ģģ If you don’t use “80” for HTTP port, then you must add
“port No” in the DVR IP address you want to connect.
21
Ex) http port: 8080
LAN : http://192.168.1.200:8080
(When you connect the set within Local Network or know that IP)
WAN : http://www.samsungipolis.com/DVRHOME:8080
(When you connect the set via External Network)
Internet Explorer
If the popup window is not activated, unblock the popup.
If you first connect to the PC, you will see a message as shown.
Install the suggested ActiveX control.
If you first connect to the PC, you will see a message as
shown above. Click <Install> to install the suggested
software.
22
Click [Close] to exit from the Silverlight plug-in installation
screen.
23
1. Use a web browser to connect to the DVR.
2. If Silverlight plug-in is already installed, you will see the
screen as shown.
3. If this is the case, perform Step 3 [TCP port & Web
Viewer port settings] below.
ģģ Check Point
If you want to use SDE-Series DVR Web Viewer with Safari
Browser on a Mac, please refer to this user guide and install
Multi Viewer with firmware upgrade if necessary.
Safari on MAC.
• Brower versions available: Safari 5.1.1 or later version
• Silverlight: 4.0.60831.0 or later
Click [Click now to Install] to display the installation screen
as shown.
English-7
4. If the screen above does not appear, check if the DVR set
is connected properly with a valid IP address.
24
27
Connect to the Web Viewer and enter the user ID and
password.
Default ID: admin, Password: 4321
``
``
For more information, refer to the user manual.
The default password can be exposed to a hacking thread so it is
recommended to change the password after installing the product.
Note that the security and other related issues caused by the
unchanged password shall be responsible for the user.
Using a Smartphone
1. Download iPOLiS mobile to your Smartphone.
`` iPhone : App Store, Android: Android Market
2. From the start screen of iPOLiS mobile, tap <Device List>.
The Add Device screen appears.
1.X
``
If you want to use 2 (or more) DVR Sets, refer to the website.
(http://www.samsungcctv.com)
3. Register the DVR to the iPOLiS mobile.
Monitoring
SDE-5003 DVR
(DVR) SDE 5 scries (16CH)
25
-1 Right click the screen or press the [MODE] on the remote
control.
Refer to “20” in page 7
Refer to “16” in page 5
In case of 4250 ~4254, The last
No(4254) is for mobile viewer
2012-01-01 01:10:25
2012-01-01
01:10:25
<The picture is taken from iPhone>
25-2
26
When the launcher menu appears, press the <
``
> button.
Y ou can add or modify the screen transition interval in “Device >
Monitor” menu.
Select <Date/Time/Language  Date/Time/Language 
Setup> in <System> menu.
If the DVR set is connected to the Internet in normal network
settings, you can set the DVR’s current time in sync with the
selected <Time Server> regularly if you select to use <Time
Server>.
If you want to use the DST functions, set it to ON.
Date/Time/Language
Date/Time/Language
 Date
Time
Holiday
2012 -01-01
YYYY-MM-DD
Synchronization
Setup
Use
 Synchronization
08:14:24
24 Hours
 Time
 Time Server203.248.240.103
 Time ZoneGMT+08:00
Fail
 Last Sync Time
Setup
Not Used
 Time Sync.
Use
 Activate as Server
Dec First (Sun) 0H
Dec First (Sun) 0H
 DST
 Language
OK
Cancel
OK
Cancel
English
English-8
ģģ Compatible Smartphone
This application is optimized for
• iPhone OS 4.3.5
• Android v2.2/2.3 (Galaxy S/S2 recommended)
more information, refer to the user manual.
MM `` For
(http://www.samsungcctv.com)
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement