50281 2 ifs ded2500 series ds fin

50281 2 ifs ded2500 series ds fin
IFS® Line / Fiber Transmission
ecifications
DED2500 Series
Interface:
Format:
Rate:
ror Rate:IFS
ating Mode:
RS-232, RS-422, 2 and 4 wire RS-485 with Tri-State
7-8 Bit Data, Parity, Stop Bit Selectable
9,600 - 115,200 bps
<1 in 10˚ @
Maximum Optical Loss Budget
Ethernet
Bi-Directional
Simplex or Full-Duplex
Universal
Data Transceiver
length
1310 nm, Multimode or Single Mode
alemitter
LED
beroffibers
2
ectors
r:
al:
OVERVIEW
Terminal Block with Screw Clamps
ST
STANDARD FEATURES
The IFS DED2500 Series data transceiver supports bi-directional
• Digitally Encoded Data Transceiver
ical&Mechanical
data transmission over multimode, single mode optical fiber, or
• Supports RS-232, or RS-485 (2-wire or 4-wire) Data Interfaces
r:
electrical. The modules are 12
compatible
• Data Rates to 115,200 bps
ce Mount:
VDC @with
300RS-232,
mA and 2-wire
From
Rack
or 4-wire RS-485 data interfaces and all major data protocols. The
• Web Based Configuration
ber of Rack
Slots: common standard
3 serial data to Ethernet data to
unit converts
• No In-field Electrical or Optical Adjustments Required
nt Protection:
Automatic
Resettable
Solid-State Current
Limiters
Status Indicators For Monitoring All Critical Operating
be transported over Ethernet
networks. Web
based configuration
• LED
t Board:ensures ease of installation Meets
Standard
requiringIPC
no electrical
or optical adjustParameters
n./cm.) (LxWxH)
ments. Each transceiver incorporates status indicating LED’s for
• Automatic Resettable Fuses on all Power Lines
ce Mount:
4.18
x 3.96The
x 1.0
in., 10.62
x 10.06
cm
monitoring of proper system
operation.
modules
are available
in x 2.5
• Distances
up to 28 Miles (45km)
ing Weight:
<
2
lbs./0.9
kg
• Comprehensive Lifetime Warranty
stand-alone only.
onmental
:
> 100,000 hours
APPLICATION EXAMPLES
ating Temp:
-40° C to +74° C
ge Temp:
-40° C to +85° C
• Data Control Over Ethernet
ve Humidity:
0% to 95% (non-condensing)†
• Data Conversion
be extended to condensation conditions by adding suffix ‘–C’ to model number for conformal coating.
SYSTEM DESIGN
System Design
up to 1.2 miles
(2 km)
DED2500-EM
DED2500-EM
ifs
International
ifs
Fiber
Systems
Incorporated
Control
Data
International
Fiber
Systems
Incorporated
203.426.1180
203.426.1180
1 Fiber
62.5/125μm MM
100 FX
Control
Data
Host
FibersRequired
Opt.Pwr.Budget
Max.Distance*
N/A
N/A
1000 ft. (300 m)
interlogix.com
DED2500 Series
North America
T 855-286-8889
Latin America
T 561-998-6114
IFS Universal Ethernet Bi-Directional Data Transceiver
Ordering Information
Electrical
Part Number
Description
Fibers Required
Optical Pwr. Budget
Max. Distance*
DED2500-E
10/100 Mbps Ethernet
N/A
N/A
1000 ft. (300 m)
Multimode 62.5/125µm**
DED2500-EM
Data Transceiver (1310 nm)
2
13 dB
1.2 miles (2 km)
Single Mode 9/125µm
DED2500-ES
1000 Mbps Ethernet (1310 nm)
4
15 dB
28 miles (45 km)
Accessories ♦
PS12VDC1.5A-U
12VDC, 1.5A Plug-in Power supply (110/220VAC) with Universal power plug adapter kit (Included)
*Optical transmission distance is limited to optical loss of the fiber and any additional loss introduced by connectors, splices and patch panels.
Distance can also be limited by fiber bandwidth. **For 50/125 Fiber, subtract 4 dB from Optical Power Budget.
♦ All accessories are third party manufactured.
GE
Security
Specifications
Data
Data Interface:
RS-232, RS-422, 2 and 4 wire RS-485 with Tri-State
Data Format:
7-8 Bit Data, Parity, Stop Bit Selectable
Data Rate:
9,600 - 115,200 bps
Bit Error Rate:
<1 in 10° @ Maximum Optical Loss Budget
Operating Mode:
Simplex or Full-Duplex
Wavelength
1310 nm, Multimode or Single Mode
Opticalemitter
LED
Number Of Fibers
2
Connectors
Power:
Terminal Block with Screw Clamps
Optical:
ST
North America
T 888-GE-SECURITY
888-437-3287
F 503-691-7566
E [email protected]
Asia
T 852-2907-8108
F 852-2142-5063
Australia and New Zealand
T 613-9239-1200
F 613-9239-1299
Europe
T 44-113-238-1668
F 44-113-253-8121
Latin America
T 305-593-4301
F 305-593-4300
gesecurity.com/ifs
Electrical & Mechanical
Power:
Surface Mount:
12 VDC @ 300 mA
Rack:
From Rack
Number of Rack Slots:
3
Current Protection:
Automatic Resettable Solid-State Current Limiters
Circuit Board:
Meets IPC Standard
Specifications subject to
change without notice
Agency Compliance
© 2008 General Electric Company
Complies
with
FDA Performance
All Rights
Reserved
Standard for Laser Products, Title 21,
Code of Federal Regulations, Subchapter J
Size (in./cm.) (LxWxH)
Surface Mount:
4.18 x 3.96 x 1.0 in., 10.62 x 10.06 x 2.5 cm
Shipping Weight:
< 2 lbs./0.9 kg
Environmental
MTBF:
> 100,000 hours
Operating Temp:
-40° C to +74° C
Storage Temp:
-40° C to +85° C
Relative Humidity:
0% to 95% (non-condensing)
Made in the USA
Complies with FDA Performance
Standard for Laser Products, Title 21,
Code of Federal Regulations, Subchapter J
Ordering Information
Part Number
D1010
interlogix.com
D1010WDMA✧
Multimode
D1010WDMB
62.5/125µm**
Specifications subject
to change without
notice.
D1020
© 2013 United Technologies Corporation
All rights
reserved.
D1030
Interlogix is part of UTC Building
& Industrial
Systems, ✧
Single Mode
D1030WDMA
a unit of United
Technologies Corporation.
9/125µm
D1030WDMB
De
RS
RS
RS
RS
RS
RS
RS
DED2500 Series
Accessories♦
PS-12VDC 12 Volt DC Plu
PS-12VDC-230 12 Volt D
Options
Add ‘-R3’ to Model Num
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement