PS - Solo Process Temperature Controllers

PS - Solo Process Temperature Controllers
Prices as of April 13, 2016. Check Web site for most current prices.
Company
Information
Drives
Soft Starters
Motors
Process Control
Power
Transmission
Motion: Servos
and Steppers
Up-to-date price list:
www.automationdirect.com/pricelist
FREE Technical Support:
www.automationdirect.com/support
FREE Videos:
Sensors:
Proximity
Sensors:
Photoelectric
Sensors:
Encoders
www.automationdirect.com/videos
Sensors:
Limit Switches
FREE Documentation:
www.automationdirect.com/documentation
In this interactive PDF you can:
•Use bookmarks to navigate
by product category
Motor Controls
FREE CAD drawings:
Sensors:
Current
Sensors:
Pressure
www.automationdirect.com/cad
Sensors:
Temperature
•Use bookmarks to save,
search, print or e-mail the
catalog section
Sensors:
Level
Sensors:
Flow
•Click on part #s to link
directly to our online store
for current pricing, specs,
stocking information and
more
Pushbuttons
and Lights
Stacklights
Signal
Devices
Process
Relays and
Timers
Pneumatics:
Air Prep
Pneumatics:
Directional Control
Valves
Pneumatics:
Cylinders
Pneumatics:
Tubing
Pneumatics:
Air Fittings
Appendix
Book 2
Terms and
Conditions
www.automationdirect.com/process-controllers
Book 2 (14.3)
Process Control
ePS-1
Prices as of April 13, 2016. Check Web site for most current prices.
SOLO Process and Temperature Controllers
110
$
130
1/4 DIN
$
1/8 DIN
100
$
1/16 DIN
90
$
1/32 DIN
Choose from 22 models (starting under $100)
What is a temperature controller?
Universal inputs
A temperature controller is simply a controller that takes an
input signal from a temperature device, such as a thermocouple RTD, or analog signal, and maintains a setpoint using
an output signal. Temperature controllers are powerful control
tools, but offer very simple operation. SOLO controllers offer
four types of control modes: PID, ON/OFF, Ramp/Soak, and
manual.
SOLO controllers support 13 types of temperature inputs and 5 types
of analog inputs – all standard on each unit.
With the SOLO series, you get:
• Precise control
• Flexible connectivity
• The right size to fit your application
• An unbeatable price that includes award-winning
technical support
• AC powered or 24VDC models
®
With the industry’s best installation documentation, just follow a few
simple steps and your process will be up and running in no time.
Dual 4-digit,
7-segment displays
Individual Process
Variable Display
Individual Set
Point Display
Selectable LEDs
for oF, oC
and 3 individual
alarm
LEDs
Individual
Autotuning and
Output LEDs
Simple navigation with pushbutton programming, or you can download the FREE software
from our Web site for programming and monitoring the SOLO controllers.
Select the
controller that best fits your application
SOLO brand controllers offer you outstanding features at unbeatable prices:
•4 standard DIN sizes with a dual 4-digit, 7-segment displays for
•Universal inputs, including T/C, RTD, mA, mV and DC voltage,
Process Variable and Setpoint
are standard on all controllers
•Dual output control for heating and cooling
•Flexible control modes to fit your process include PID, Ramp/Soak, On/Off and Manual
•Built-in PID with Autotuning (AT) function for fast and easy
startups
•IP65 environmental rating (when mounted in appropriate enclosures)
Features
Display of PV & SP
RS-485, MODBUS RTU/ASCII
Two Separate Event Inputs
Dual Outputs for Heating & Cooling Loops
Available Alarms Groups
Auto Tuning Capability
Universal Inputs (T/C, RTD, mV & mA)
1/32 DIN
SL4824
1/16 DIN
SL4848
1/8 DIN
SL4896
1/4 DIN
SL9696
Yes
Yes
Yes
Yes
Yes
No
Yes
No
Yes
Yes
Yes
Yes
Yes
1
Yes
3
Yes
3
Yes
3
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
go to page PS-9
go to page PS-10
go to page PS-11
go to page PS-12
Book 2 (14.3)
ePS-2
Process Control
1-800-633-0405
Prices as of April 13, 2016. Check Web site for most current prices.
Simple Configuration and Control
Company
Information
FREE configuration and monitoring software
Drives
That’s right, FREE! Configuration and monitoring software (SL-SOFT, downloadable from our Web site) allows you to
configure each controller with ease and gives you data analysis capabilities for up to 10 units simultaneously.
Process control setup
made easy
All units support RS-485 serial communications (up to 38.4K bps) , which allows
you to use the free configuration software
[SL-SOFT] to configure and monitor multiple
SOLO controllers using Modbus RTU or
Modbus ASCII protocols. For even simpler
setup, the controller can be configured manually with the user-friendly keypad on each unit.
Collect and act on data
FREE software that’s easy-to-use and intuitive, with a GUI that makes setting up
the SOLO series of temperature controllers a breeze.
(Download at http://support.automationdirect.com/downloads.html)
Using RS-485 communications, the
SL-SOFT utility provides the ability to monitor
and log historical data, using the built-in
trending graph, from up to ten devices and
save it to a .txt file.The RS-485 port can also
provide connection to any HMI, PC or PLC
supporting industry-standard Modbus RTU
or Modbus ASCII protocol. This allows you to
collect, monitor and have your application react
to data being read from the SOLO controllers.
Soft Starters
Motors
Power
Transmission
Motion: Servos
and Steppers
Motor Controls
Sensors:
Proximity
Sensors:
Photoelectric
Sensors:
Encoders
Sensors:
Limit Switches
Sensors:
Current
Sensors:
Pressure
Sensors:
Temperature
Sensors:
Level
Sensors:
Flow
PLC Connection
HMI Connection
PC Connection
Use a PLC to collect data from the
controllers and then have your program
trigger events based on the values
Use an operator interface to collect data
and monitor your process.
Use a PC to configure and monitor your SOLO
controllers with SL-SOFT. Use the trending
graph to monitor and log historical data.
Pushbuttons
and Lights
Stacklights
Signal
Devices
Process
Relays and
Timers
Pneumatics:
Air Prep
Pneumatics:
Directional Control
Valves
R
S
4
8
5
R
S
4
8
5
Pneumatics:
Cylinders
R
S
4
8
5
Pneumatics:
Tubing
Pneumatics:
Air Fittings
Appendix
Book 2
Terms and
Conditions
www.automationdirect.com/process-controllers
Book 2 (14.3)
Process Control
ePS-3
Prices as of April 13, 2016. Check Web site for most current prices.
SOLO Process and Temperature Controllers
Cooling
Output
Where can
you put SOLO
to work?
Heating
Output
Process and temperature controllers are powerful process control
tools, but they offer very simple operation. SOLO controllers can
be used in a variety of applications, either as a stand-alone
monitor or controller, or in conjunction with a PLC or other intelligent device.
Thermocouple
For example, SOLO can perform simple monitoring (figure at
bottom) and alert an operator to abnormal conditions via alarm
LEDs on the unit or via a discrete relay alarm output.Data can
also be collected and stored by an HMI such as C-more. For
stand-alone control loops, SOLO can use a single output (such
as furnace control shown below); the dual-output feature makes
heating/cooling control straightforward (example at left).
Cooling
Water
Heating/Cooling
Heating Unit
Industrial Heating/Cooling
RS-485
Thermocouple
Alarms
HMI
Heating
Output
Furnace
Control
Furnace
RS-485
Thermocouple
HMI
Alarms
Oven
Oven Temperature
Monitoring
Book 2 (14.3)
ePS-4
Process Control
1-800-633-0405
Prices as of April 13, 2016. Check Web site for most current prices.
Company
Information
Environmental Control
Drives
Wet Bulb
Soft Starters
Temperature
In this example, SOLO performs control
using either configured setpoints or external
setpoints received remotely via an operator
interface. An event input is used to signal the
controller which parameters to use.
Thermocouple
Motors
Power
Transmission
Motion: Servos
and Steppers
Motor Controls
Sensors:
Proximity
External Setpoints
Thermocouple
Sensors:
Photoelectric
Switch
Tank
Sensors:
Encoders
Humidity
Control
Heating
Output
Sensors:
Limit Switches
RS-485
Sensors:
Current
Alarms
Sensors:
Pressure
Sensors:
Temperature
HMI
Sensors:
Level
Sensors:
Flow
Pushbuttons
and Lights
Process Control
RS-485
Feed-forward
Stacklights
Signal
Devices
Process
pH signal
Relays and
Timers
Waste water
Backup
to a PLC
PLC
pH sensor
Neutralizer
Pneumatics:
Air Prep
Pneumatics:
Directional Control
Valves
Pneumatics:
Cylinders
PV
Neutralized waste water
Fail
signal
Pneumatics:
Tubing
Pneumatics:
Air Fittings
MV
Appendix
Book 2
Terms and
Conditions
www.automationdirect.com/process-controllers
Book 2 (14.3)
Process Control
ePS-5
Prices as of April 13, 2016. Check Web site for most current prices.
SOLO Temperature Controllers
Overview
AutomationDirect’s SOLO series
includes single-loop dual-output
temperature controllers that can control
both heating and cooling simultaneously. There are four types of control
modes: PID, ON/OFF, Ramp/Soak and
Manual. Depending upon the model of
controller, the available outputs include
relay, voltage pulse, current, and linear
voltage. There are up to three alarm
outputs available. (The SL4824 series
supports only one alarm output.) Select
from seventeen alarm types in the initial
setting mode. SOLO controllers can
accept various types of thermocouple,
RTD, or analog inputs. SOLO controllers
have a built-in RS-485 interface using
Modbus slave (ASCII or RTU) communication protocol.
Features
• 1/32 DIN, 1/16 DIN, 1/8 DIN, or 1/4 DIN
panel size
• 2 line x 4 character 7-segment LED display for Process value (PV): Red color,
and Set Point (SV): Green color
• PID control with Autotune (AT) function
• Accepts eleven types of thermocouples,
two types of Pt100 RTD temperature
sensors, and DC mA, mV, and Volt signals
• Selectable between°F and °C for
thermocouple or RTD inputs.
• 0°C to 50 °C operating temperature range
• Up to three alarm groups, each with
seventeen available alarm types.
• Four possible control output options
depending on model; Relay, Voltage
Pulse, Current, and Linear Voltage.
• Baud rates up to 38.4K bps.
• Thermocouple and Platinum RTD sample rates at 400 ms per scan
• Analog sample rate at 150 ms per scan
• 64 levels of Ramp / Soak control
• Two optional Event Inputs available in
1/8 DIN and 1/4 DIN sizes
• UL, CUL, and CE agency approvals
SOLO Controller Part
Number Key
SL 4896 - V R E - D
Input Voltage
None: 100 to 240 VAC
D: 24 VDC
Event Input
None: No Event input
E: Event input is provided
2nd Output Group
R: Relay output
V: Voltage Pulse output
1st Output Group
R: Relay output
V: Voltage Pulse output
C: DC Current output
L: Linear Voltage output
Panel Size (W x H)
4824: 1/32 DIN W48 x H24mm
4848: 1/16 DIN W48 x H48mm
4896: 1/8 DIN W48 x H96mm
9696: 1/4 DIN W96 x H96mm
Solo Temperature Controller
Specifications
Input Power Requirements
Operation Voltage Range
Power Consumption
Memory Protection
Control Mode
Input Accuracy
Vibration Resistance
Shock Resistance
Ambient Temperature Range
Storage Temperature Range
Altitude
Relative Humidity
RS-485 Communication
Transmission Speed
IP Rating
Agency Approvals
Pollution Degree
Input Types
• Thermocouple*
• Platinum RTD
• Analog
Control Output Options
• Relay (R)
• Voltage Pulse (V)
• Current (C)
• Linear Voltage (L)
100 to 240 VAC 50 / 60 Hz or 24 VDC
AC: 85 VAC to 264 VAC or DC: 21.6 VDC to 26.4 VDC
5 VA Max
EEPROM 4K bit, number of writes 100,000
PID, ON/OFF, Ramp / Soak control or Manual
Less than ± 0.2% full scale (except thermocouple R, S, & B types)
Max ± 3° (thermocouple R, S, & B types)
10 to 55 Hz, 10 m/s2 for 10 min, each in X, Y and Z directions
Max. 300 m/s2, 3 times in each 3 axes, 6 directions
32°F to 122°F (0°C to 50°C)
-4°F to 149°F (-20°C to 65°C)
2000m or less
35% to 80% (non-condensing)
Modbus slave ASCII / RTU protocol
2400, 4800, 9600, 19.2K, 38.4K bps
IP65: Complete protection against dust and low pressure spraying water from all directions. (inside suitable enclosure)
UL, CUL, CE (UL file number E311366)
Degree 2 - Normally, only non-conductive pollution occurs.
Temporary conductivity caused by condensation is to be expected
K, J, T, E, N, R, S, B, L, U, TXK (400 ms per scan)
3-wire Pt100, JPt100 (400 ms per scan)
0-50 mV, 0-5V, 0-10V, 0-20 mA, 4-20 mA (150 ms per scan)**
SL4824: SPST max. resistive load 3A @ 250 VAC
SL4848: SPST max. resistive load 5A @ 250 VAC
SL4896, SL9696: SPDT max. resistive load 5A @ 250 VAC
SL4824: SPST max. resistive load 3A @ 30 VDC
SL4848: SPST max. resistive load 5A @ 30 VDC
SL4896, SL9696: SPDT max. resistive load 5A @ 30 VDC
DC 14V Max, output current 40mA Max
DC 4-20 mA output (Load resistance: Max 600 Ω)
DC 0-10V (Load resistance Min 1KΩ)
*Note: Use only ungrounded thermocouples.
** Analog input impedance: 1.8M ohm
Book 2 (14.3)
ePS-6
Process Control
1-800-633-0405
Prices as of April 13, 2016. Check Web site for most current prices.
SOLO Controller Selection Guide
Company
Information
Drives
SOLO Temperature Controller Selection Guide
Series
Part
Number
Price
100 - 240 VAC Relay - 3A, SPST
SL4824-VR
100 - 240 VAC
Voltage Pulse
100 - 240 VAC
Current
SL4824-LR
$90.00
SL4824-RR-D
W - 48mm
H - 24mm
D - 103mm
(1/32 DIN)
SL4824-VR-D
SL4824-CR-D
24 VDC
Voltage Pulse
24 VDC
Current
SL4848-VR
100 - 240 VAC
Voltage Pulse
100 - 240 VAC
Current
100 - 240 VAC
Linear Voltage
24 VDC
Relay - 5A, SPST
24 VDC
Voltage Pulse
SL4848-RR-D
SL4848-VR-D
$100.00
24 VDC
Current
SL4848-VV
100 - 240 VAC
Voltage Pulse
SL4848-CV
100 - 240 VAC
Current
SL4848-LV
100 - 240 VAC
Linear Voltage
SL4896-RRE
100 - 240 VAC Relay - 5A, SPDT
SL4896-VRE
SL4896-CRE
$110.00
W - 48mm
H - 96mm
D - 92mm
(1/8 DIN)
Event
Inputs
100 - 240 VAC
Voltage Pulse
100 - 240 VAC
Current
Alarm
Outputs
RS-485
Port
Motors
Power
Transmission
Motion: Servos
and Steppers
Control Output 2
can be used as
Alarm 1
Motor Controls
Sensors:
Proximity
Sensors:
Photoelectric
N/A
Relay - 5A,
SPST
Voltage Pulse
Alarm 1 and
Alarm 2 are 3A,
SPST Relays
with a shared
common. Control
Output 2 can be
used as Alarm 3
Sensors:
Encoders
Alarm 1 and
Alarm 2 are 3A,
SPST Relays
with a shared
common.
Sensors:
Pressure
Sensors:
Limit Switches
Sensors:
Current
Yes
Sensors:
Temperature
Sensors:
Level
Sensors:
Flow
Alarm 1 and
Alarm 2 are 3A,
SPST Relays.
24 VDC
Relay - 5A, SPDT Relay - 5A, SPDT
Control Output 2
can be used as
100 - 240 VAC Relay - 5A, SPDT
Event 1 /
Alarm 3
Event 2
100 - 240 VAC Voltage Pulse
Pushbuttons
and Lights
100 - 240 VAC
Current
Process
100 - 240 VAC
Linear Voltage
24 VDC
Relay - 5A, SPDT
100 - 240 VAC
Voltage Pulse
SL9696-CVE
100 - 240 VAC
Current
SL9696-LVE
100 - 240 VAC
Linear Voltage
SL4896-LRE
SL4896-RRE-D
SL9696-RRE
SL9696-VRE
SL9696-CRE
SL9696
Relay - 3A, SPST
SL4848-CR
W - 48mm
H - 48mm
D - 90mm
(1/16 DIN)
Soft Starters
Control
Output 2
Linear Voltage Relay - 3A, SPST
24 VDC
100 - 240 VAC Relay - 5A, SPST
SL4848-CR-D
SL4896
100 - 240 VAC
SL4848-RR
SL4848-LR
SL4848
Control
Output 1
SL4824-RR
SL4824-CR
SL4824
Dimensions
Input
Voltage
SL9696-LRE
SL9696-RRE-D
SL9696-VVE
$130.00
W - 96mm
H - 96mm
D - 95mm
(1/4 DIN)
100 - 240 VAC
Linear Voltage
Stacklights
Signal
Devices
Relays and
Timers
Voltage Pulse
Alarm 1 and
Alarm 2 are 3A,
SPST Relays
*Notes: EVENT1 input is a normally open contact input that controls the output(s) of the controller. All controller outputs are disabled when the contact is closed.
EVENT2 input is a normally open contact input that switches the control parameter group between two control parameter groups based on the state of
EVENT2. If the contact is open, the primary control parameter group is used for all parameters and outputs. If the contact is closed, the secondary control
parameter group is used for all parameters and outputs. Each temperature setting value has individual control parameters.
Pneumatics:
Air Prep
Pneumatics:
Directional Control
Valves
Pneumatics:
Cylinders
Pneumatics:
Tubing
Pneumatics:
Air Fittings
Appendix
Book 2
Terms and
Conditions
www.automationdirect.com/process-controllers
Book 2 (14.3)
Process Control
ePS-7
Prices as of April 13, 2016. Check Web site for most current prices.
SOLO Controller Selection Guide, continued
Available Input Types
All SOLO temperature controllers support these input types.
RTD Type and Range
Thermocouple Type and Range*
Input Temperature Sensor Type
Thermocouple TXK type
Thermocouple U type
Thermocouple L type
Thermocouple B type
Thermocouple S type
Thermocouple R type
Thermocouple N type
Thermocouple E type
Thermocouple T type
Thermocouple J type
Thermocouple K type
Temperature Range
-328 to 1472°F (-200 to 800°C)
-328 to 932°F (-200 to 500°C)
Input Temperature Sensor Type
Platinum Resistance (Pt100)
Platinum Resistance (JPt100)
Temperature Range
-328 to 1112°F (-200 to 600°C)
-4 to 752°F (-20 to 400°C)
-328 to 1562°F (-200 to 850°C)
Voltage Input Type and Input Range
212 to 3272°F (100 to 1800°C)
32 to 3092°F (0 to 1700°C)
32 to 3092°F (0 to 1700°C)
-328 to 2372°F (-200 to 1300°C)
32 to 1112°F (0 to 600°C)
Voltage Input Type
0~50mV Analog Input
0V~10V Analog Input
0V~5V Analog Input
Engineering Range
-999 to 9999
-999 to 9999
-999 to 9999
-328 to 752°F (-200 to 400°C)
Current Input Type and Range
-148 to 2192°F (-100 to 1200°C)
-328 to 2372°F (-200 to 1300°C)
*Note: Use only ungrounded thermocouples.
Current Input Type
4~20mA Analog Input
0~20mA Analog Input
User Configurable Output Options
Control Output 1
Control Output 2
Heating
Cooling
Heating
Cooling
(Alarm 1)
(Alarm 1)
Cooling
Heating
Engineering Range
-999 to 9999
-999 to 9999
Mounting Clips
Series
SL4824
SL4848
SL4896
SL9696
Part Number
Pkg. Qty.
Price
SL-CLP-1
8
$12.00
SL-CLP-2
20
$9.00
Book 2 (14.3)
ePS-8
Process Control
1-800-633-0405
Prices as of April 13, 2016. Check Web site for most current prices.
SOLO Temperature Controllers 1/32 DIN
SL4824 Series
Company
Information
Drives
$90.00
Soft Starters
Features
Motors
• 1 /32 DIN panel size
• P ID with Autotune
• Thermocouple, RTD, mA, mV and voltage inputs
•O
utput #1: Relay, Voltage Pulse, Current or Linear Voltage
•O
utput #2; Relay or Alarm Relay
•R
S-485 communications port
•U
L, CUL and CE approvals
Power
Transmission
Motion: Servos
and Steppers
Motor Controls
Sensors:
Proximity
Sensors:
Photoelectric
Sensors:
Encoders
Sensors:
Limit Switches
Sensors:
Current
Note: A set of mounting clips and a 249 Ω resistor are included.
Extra mounting clips are available (Part Number: SL-CLP-1, Qty: 20 per package)
Sensors:
Pressure
Output Specifications
Part Number
Price
Input Voltage
Output #1
Output #2 / Alarm 1*
SL4824-RR
110 - 240 VAC
Relay - SPST
Relay - SPST
SL4824-VR
110 - 240 VAC
Voltage Pulse
Relay - SPST
SL4824-CR
110 - 240 VAC
Current
Relay - SPST
110 - 240 VAC
Linear Voltage
Relay - SPST
SL4824-RR-D
24 VDC
Relay - SPST
Relay - SPST
SL4824-VR-D
24 VDC
Voltage Pulse
Relay - SPST
SL4824-CR-D
24 VDC
Current
Relay - SPST
SL4824-LR
$90.00
Sensors:
Temperature
Sensors:
Level
Sensors:
Flow
Pushbuttons
and Lights
Stacklights
*Output #2 can be configured as control output #2 or as Alarm 1 output
Dimensions
Minimum Cutout and Spacing
Signal
Devices
Process
Relays and
Timers
1.76”
(44.75 mm)
Pneumatics:
Air Prep
SV
AT
OUT1
OUT2
ALM
F
C
SET
1.89”
(48.0 mm)
0.13”
(3.40 mm)
3.93”
(99.8 mm)
Pneumatics:
Directional Control
Valves
Pneumatics:
Cylinders
1.58” (Min.)
[40.0 mm]
0.86”
(21.85 mm)
0.94”
(24.0 mm)
SOLO 4824
PV
2.56”
(Min.)
[65.0mm]
1.76” +0.02
-0
[44.8 mm] +0.6
-0
0.87"
[22.0 mm]
+0.02
-0
+0.6
-0
Pneumatics:
Tubing
Pneumatics:
Air Fittings
Appendix
Book 2
Terms and
Conditions
For wiring diagrams go to www.automationdirect.com’s Documentation section.
www.automationdirect.com/process-controllers
Book 2 (14.3)
Process Control
ePS-9
Prices as of April 13, 2016. Check Web site for most current prices.
SOLO Temperature Controllers 1/16 DIN
SL4848 Series
$100.00
Features
• 1 /16 DIN panel size
• P ID with Autotune
• Thermocouple, RTD, mA, mV and voltage inputs
•O
utput #1: Relay, Voltage Pulse, Current or Linear Voltage
•O
utput #2: Relay or Voltage Pulse for control or Alarm output
•R
S-485 communications port
•U
L, CUL and CE approvals
Note: A set of mounting clips and a 249 Ω resistor are included.
Extra mounting clips are available (Part Number: SL-CLP-2, Qty: 20 per package)
Output Specifications
Part Number
Price
SL4848-RR
SL4848-VR
SL4848-CR
SL4848-LR
SL4848-RR-D
SL4848-VR-D
SL4848-CR-D
SL4848-VV
SL4848-CV
SL4848-LV
$100.00
Input Voltage
Output #1
110 - 240 VAC
Relay - SPST
Output #2 / Alarm #3* Alarm #1** Alarm #2**
Relay - SPST
Relay - SPST
Relay - SPST
110 - 240 VAC
Voltage Pulse
Relay - SPST
Relay - SPST
Relay - SPST
110 - 240 VAC
Current
Relay - SPST
Relay - SPST
Relay - SPST
110 - 240 VAC
Linear Voltage
Relay - SPST
Relay - SPST
Relay - SPST
24 VDC
Relay - SPST
Relay - SPST
Relay - SPST
Relay - SPST
24 VDC
Voltage Pulse
Relay - SPST
Relay - SPST
Relay - SPST
24 VDC
Current
Relay - SPST
Relay - SPST
Relay - SPST
110 - 240 VAC
Voltage Pulse
Voltage Pulse
Relay - SPST
Relay - SPST
110 - 240 VAC
Current
Voltage Pulse
Relay - SPST
Relay - SPST
110 - 240 VAC
Linear Voltage
Voltage Pulse
Relay - SPST
Relay - SPST
*Output #2 can be configured as control output #2 or as Alarm #3
** Alarm #1 and Alarm #2 have a shared common
Dimensions
Minimum Cutout and Spacing
1.76”
(44.75 mm)
PV
SOLO 4848
AT
OUT1
OUT2
ALM
SET
1.89”
(48.0 mm)
1.89”
(48.0 mm)
F
1.76”
(44.75 mm)
C
SV
0.37”
(9.5 mm)
2.36”
(Min.)
[60.0 mm]
2.56" (Min.)
[65.0 mm]
+0.02
1.77" -0
[45.0 mm] +0.6
-0
1.77"
[45.0 mm]
+0.02
-0
+0.6
-0
3.15”
(80.0 mm)
For wiring diagrams go to www.automationdirect.com’s Documentation section.
Book 2 (14.3)
ePS-10
Process Control
1-800-633-0405
Prices as of April 13, 2016. Check Web site for most current prices.
SOLO Temperature Controllers 1/8 DIN
Company
Information
Drives
SL4896 Series
$110.00
Soft Starters
Motors
Features
Power
Transmission
• 1 /8 DIN panel size
• P ID with Autotune
• Thermocouple, RTD, mA, mV and voltage inputs
• 2 event inputs
•O
utput #1: Relay, Voltage Pulse, Current or Linear Voltage
•O
utput #2: Relay or Alarm Relay
•R
S-485 communications port
•U
L, CUL and CE approvals
Motion: Servos
and Steppers
Motor Controls
Sensors:
Proximity
Sensors:
Photoelectric
Sensors:
Encoders
Sensors:
Limit Switches
Sensors:
Current
Note: A set of mounting clips and a 249 Ω resistor are included.
Extra mounting clips are available (Part Number: SL-CLP-2, Qty: 20 per package)
Sensors:
Pressure
Output Specifications
Part Number
Price
SL4896-RRE
SL4896-VRE
SL4896-CRE
SL4896-LRE
SL4896-RRE-D
$110.00
Input Voltage
Output #1
Output #2 / Alarm #3*
Alarm #1
Alarm #2
110 - 240 VAC
Relay - SPDT
Relay - SPDT
Relay - SPST
Relay - SPST
110 - 240 VAC
Voltage Pulse
Relay - SPDT
Relay - SPST
Relay - SPST
110 - 240 VAC
Current
Relay - SPDT
Relay - SPST
Relay - SPST
110 - 240 VAC
Linear Voltage
Relay - SPDT
Relay - SPST
Relay - SPST
24 VDC
Relay - SPDT
Relay - SPDT
Relay - SPST
Relay - SPST
Sensors:
Temperature
Sensors:
Level
Sensors:
Flow
Pushbuttons
and Lights
*Output #2 can be configured as control output #2 or as Alarm #3
Stacklights
Minimum Cutout and Spacing
Dimensions
2.36"
(Min.)
[60.0 mm]
Signal
Devices
Process
Relays and
Timers
1.73”
(44.0 mm)
Pneumatics:
Air Prep
Pneumatics:
Directional Control
Valves
SOLO 4896
PV
OUT2
F
C
AT
ALM1
ALM2
ALM3
3.58”
(91.0 mm)
OUT1
3.87”
(98.2 mm)
3.77”
(95.7 mm)
SV
4.72"
(Min.)
[120.0 mm]
Pneumatics:
Cylinders
1.75"
[44.5 mm]
3.60"
[91.4 mm]
0.50”
(12.8 mm)
Pneumatics:
Air Fittings
Terms and
Conditions
+0.02
-0
+0.6
-0
3.12”
(79.2 mm)
For wiring diagrams go to www.automationdirect.com’s Documentation section.
www.automationdirect.com/process-controllers
Pneumatics:
Tubing
Appendix
Book 2
SET
1.89”
(48.0 mm)
+0.02
-0
+0.6
-0
Book 2 (14.3)
Process Control
ePS-11
Prices as of April 13, 2016. Check Web site for most current prices.
SOLO Temperature Controllers 1/4 DIN
SL9696 Series
$130.00
Features
• 1 /4 DIN panel size
• P ID with Autotune
• Thermocouple, RTD, mA, mV and voltage inputs.
• 2 event inputs
•O
utput #1: Relay, Voltage Pulse, Current or Linear Voltage
•O
utput #2: Relay or Voltage Pulse for control or Alarm output
•R
S-485 communications port
•U
L, CUL and CE approvals
Note: A set of mounting clips and a 249 Ω resistor are included.
Extra mounting clips are available (Part Number: SL-CLP-2, Qty: 20 per package)
Output Specifications
Part Number
Price
SL9696-RRE
SL9696-VRE
SL9696-CRE
SL9696-LRE
SL9696-RRE-D
SL9696-VVE
SL9696-CVE
SL9696-LVE
Input Voltage
$130.00
Output #1
Output #2 / Alarm #3*
Alarm #1
Alarm #2
100 - 240 VAC
Relay - SPDT
Relay - SPDT
Relay - SPST
Relay - SPST
100 - 240 VAC
Voltage Pulse
Relay - SPDT
Relay - SPST
Relay - SPST
100 - 240 VAC
Current
Relay - SPDT
Relay - SPST
Relay - SPST
100 - 240 VAC
Linear Voltage
Relay - SPDT
Relay - SPST
Relay - SPST
24 VDC
Relay - SPDT
Relay - SPDT
Relay - SPST
Relay - SPST
100 - 240 VAC
Voltage Pulse
Voltage Pulse
Relay - SPST
Relay - SPST
100 - 240 VAC
Current
Voltage Pulse
Relay - SPST
Relay - SPST
100 - 240 VAC
Linear Voltage
Voltage Pulse
Relay - SPST
Relay - SPST
*Output #2 can be configured as control output #2 or as Alarm #3
Dimensions
Minimum Cutout and Spacing
4.33" (Min)
[110.0 mm]
4.33" (Min)
[110.0 mm]
3.57”
(90.8 mm)
PV
F
C
3.57”
(90.8 mm)
OUT1 OUT2 ALM1 ALM2 ALM3
3.86”
(98.0 mm)
AT
3.78”
(96.0 mm)
SV
SET
3.58" +0.02
-0
[90.9 mm] +0.6
-0
3.58" +0.02
-0
[90.9 mm] +0.6
-0
SOLO 9696
3.78”
(96.0 mm)
0.62”
(15.88 mm)
3.12”
(79.2 mm)
For wiring diagrams go to www.automationdirect.com’s Documentation section.
Book 2 (14.3)
ePS-12
Process Control
1-800-633-0405
www.automationdirect.com/service
#1 Voted Service
We do not charge
for technical
support . . . Period.
Rated #1 in Technical Support
for 14 Years Straight…and It’s FREE!
Are you tired of calling a local distributor to discover their
“product expert” is not in? How about waiting hours for
technical service to return a message? Or paying for
phone support service only to be placed on hold when
you try to use it?
It’s no accident that our Tech
demonstrates the best attitude
in the industry!
Team
and
routinely
manners
We send our customers surveys to score our attitude,
accuracy and timeliness then take these scores and use
them as part of the Tech team’s report card. The bottom
line is that you get great service by design.
Over 85% of customers who have used our service and
responded to surveys say it’s better than what they have
been getting from other automation suppliers. 91% say
we are above average to excellent in accuracy, 90%
say we are above average to excellent in thoroughness,
91% say we are above average in response time, and
96% rate us above average in courtesy. Isn’t it great to
get better service AND a better price?
OEMs voted our name 14 years in a row!
The Reader’s Choice survey hosted by Control Design magazine aims to identify the best products and service in the industry. Results from 2001-2014 indicate we consistently provide top-notch support to our customers. This is in addition
to several other industry awards from independent publications.
Thanks to all who voted, we’ll continue to put customer satisfaction as our #1 priority.
FAQs, software, manuals, technical and application notes, videos,
wiring diagrams, example programs, CAD drawings, cross reference
guides, compliance documents . . . and more
www.AutomationDirect.com/support
Want to watch some videos to learn more about our products?
http://www.AutomationDirect.com/videos
www.youtube.com/automationdirect
Is where we have hundreds of helpful videos posted, from new product overviews to detailed
tutorials on topics such as PID and motion control
• “Your tech support is really excellent - the
folks there are very knowledgeable and very
willing to help. Please tell them they are
doing a way better than average job.”
• “You all are the greatest! And that gets
reinforced each time I have to call any other
vendor for technical support.“
• “Very good technical support; much, much
better than the distributor with whom we
have previously worked.”
• “Tech was outstanding, great advice on drives
and also helped lower the cost of the system.
You are my first choice for Automation and
Power Transmission products. Keep up the
great work.”
• “Your presales (tech) folks helped me find the
right parts the first time - terrific!”
YOU SAY-
Don’t forget our tech support site is loaded with tons of information
that is readily available 24/7.
• “As always, your service is stellar and your
staff is very friendly and great to work with.
Wish the rest of my vendors were as good to
work with as AutomationDirect.“
Prices as of April 13, 2016. Check Web site for most current prices.
ProSense® Digital Panel Meters
Digital Panel Meters with simple
menu-driven pushbutton configuration
1/32 DIN and 1/8 DIN meter sizes
The ProSense DPM family of digital panel meters
includes both 1/32 DIN and 1/8 DIN meter sizes with
simple menu-driven pushbutton configuration. A wide
variety of input signals can be accepted for process,
temperature, load cell, and other applications.
Available output options include alarm relays, analog
signal retransmission, and sensor excitation voltage.
Backed by a 3-year warranty, ProSense digital panel
meters offer outstanding features and performance at
an incredible price point.
Features
•Display process variables
like temperature. pressure,
level, flow, weight, voltage,
current, and others
•Manually enter scaling
values or use the process
teaching mode to scale
the display for direct or
reverse acting linear or
non-linear processes
•Models are available with
up to four relay outputs for
high and low level alarm
indication, analog signal
retransmission output for
connection to PLC inputs,
and sensor excitation
voltage to conveniently
power sensors
DPM1 Series 1/32 DIN
• 48 x 24 mm 1/32 DIN
• 4-digit (-1999 to 9999) red LED display
• Selectable decimal point
• Process (4-20mA, +/-20mA, +/-100mV, +/-10V, +/-20V, +/-200V)
• Temperature (RTD: Pt100 (3-wire); Thermocouple: J, K, T or N; Resolution: 1°F, 0.1°F, 1°C, 0.1°C)
• AC or DC powered, and loop
powered versions
• Models with 2 relay outputs and
0/4-20mA analog output
DPM2 Series 1/8 DIN
• 96 x 48 mm 1/8 DIN
• 4-digit (-9999 to 9999) red LED display
• Selectable decimal point
• Process (+/-10V, +/-200V and +/-20mA)
• Temperature (RTD: Pt100, Pt1000; Thermocouple: J, K, T, N; Resolution: 1°F, 0.1°F, 1°C, 0.1°C)
• Potentiometer (100 Ohm to 100k Ohm)
• Resistance (999.9 Ohm, 9999 Ohm and 50k Ohm)
• AC or DC powered
• Model available with 2 relay outputs
• Sensor excitation voltage 24V
DPM3 Series 1/8 DIN
• 96 x 48 mm 1/8 DIN
• 5-digit (-19999 to 39999) tri-color (red, green, amber) LED display
• Selectable decimal point
• Process (+/-10V, +/-20mA)
• Temperature (RTD: Pt100; Thermocouple: J, K, T, N; Resolution: 1°F, 0.1°F, 1°C, 0.1°C)
• Potentiometer
• Load cell (+/-15mV, +/-30mV, +/-150mV)
• AC or DC powered
• Sensor excitation voltage 24V and 10V
• 4-20mA analog output and up to 4 relays on select models
Book 2 (14.3)
ePS-14
Process Control
1-800-633-0405
Prices as of April 13, 2016. Check Web site for most current prices.
Digital Panel Meters
Company
Information
Drives
Description
Type DPM1-A-LP
Type DPM1-A-2R
Type DPM1-A-T
Type DPM2
The ProSense DPM family of digital panel
meters includes both 1/32 DIN and 1/8 DIN
meter sizes with simple menu-driven pushbutton
configuration. A wide variety of input signals can
be accepted for process, temperature, load cell,
and other applications. Available output options
include alarm relays, analog signal retransmission, and sensor excitation voltage. Backed by
a 3-year warranty, ProSense digital panel meters
offer outstanding features and performance at
an incredible price point.
Size
Display
DPM1-A-LP
Red LED*, -1999 to 9999
Selectable decimal point
DPM1-A-L
DPM1-T-H
DPM1-T-L
Inputs
Outputs
4-20mA
DPM1-A-H
Red LED, -1999 to 9999
1/32 DIN
±20mA, ±100mV
±10V, ±20V
±200V
Red LED, -1999 to 9999
Selectable decimal point
DPM1-A-A2R-H
±20mA, ±100mV
±10V, ±60V
DPM1-A-A2R-L
DPM2-AT-HL
Red LED, -9999 to 9999
Selectable decimal point
DPM2-AT-2R-HL
None
RTD Pt100 (3-wire)
TC Type J, K, T or N
DPM1-A-2R-H
DPM1-A-2R-L
±20mA, ±10V
±200V, 100-100k Ohm
potentiometer,
1k-50k Ohm resistance,
RTD Pt100 (3-wire)
RTD Pt1000 (4-wire)
TC Type J, K, T or N
DPM3-AT-H
2 Relays Form A
SPST Normally
Open
2 Relays Form A
SPST Normally
Open
0/4-20mA
Power
Price
Loop Powered
85-265VAC, 50/60 Hz
100-300VDC
21-53VAC 50/60 Hz
10.5-70VDC
85-265VAC, 50/60 Hz
100-300VDC
21-53VAC 50/60 Hz
10.5-70VDC
85-265VAC, 50/60 Hz
100-300VDC
21-53VAC 50/60 Hz
10.5-70VDC
85-265VAC, 50/60 Hz
100-300VDC
21-53VAC 50/60 Hz
10.5-70VDC
$65.00
None
$85.00
$85.00
$85.00
$85.00
$95.00
$95.00
$100.00
$100.00
$100.00
2 Relays
Form C SPDT
$110.00
DPM3-AT-2R-H
2 Relays
Form C SPDT
$140.00
DPM3-AT-4R-H
4 Relays Form A
Normally Open
with shared
common
DPM3-AT-L
DPM3-AT-2R-L
1/8 DIN
Red, Green, Amber LED
-19999 to 39999
Selectable decimal point
Motion: Servos
and Steppers
Motor Controls
Sensors:
Proximity
±20mA, ±10V
RTD Pt100 (3-wire)
TC Type J, K, T or N
Load Cell ±15mV, ±30mV,
±150mV
Potentiometer
DPM3-AT-4R-L
DPM3-AT-A-L
DPM3-AT-A2R-L
85-265VAC 50/60Hz
100-300VDC
$150.00
4-20mA
$140.00
2 Relays
Form C SPDT
4-20mA
$155.00
None
$125.00
2 Relays
Form C SPDT
$140.00
4 Relays Form A
Normally Open
with shared
common
22-53VAC 50/60 Hz
10.5-70VDC
$150.00
Sensors:
Limit Switches
Sensors:
Current
Sensors:
Pressure
Sensors:
Temperature
Sensors:
Level
Sensors:
Flow
Pushbuttons
and Lights
Signal
Devices
4-20mA
$140.00
2 Relays
Form C SPDT
4-20mA
$140.00
Book 2 (14.3)
Process Control
Relays and
Timers
Pneumatics:
Air Prep
Pneumatics:
Directional Control
Valves
Pneumatics:
Cylinders
Pneumatics:
Tubing
Pneumatics:
Air Fittings
Appendix
Book 2
Terms and
Conditions
* Illumination based on available loop current and will not be as bright as the powered Digital Panel Meters
www.automationdirect.com/process-controllers
Sensors:
Encoders
Process
$125.00
DPM3-AT-A2R-H
Power
Transmission
Stacklights
20-265VAC 50/60 Hz
11-265VDC
None
DPM3-AT-A-H
Motors
Sensors:
Photoelectric
Type DPM3
DPM Series Digital Panel Meters Selection Guide
Model
Soft Starters
ePS-15
Prices as of April 13, 2016. Check Web site for most current prices.
Digital Panel Meters - DPM1
Series 1/32 DIN
This model in the ProSense DPM1 series offers a simple, low
cost digital display of an analog 4-20mA signal. The 4-digit
red LED display is easily scaled into any engineering units
from -1999 to 9999 with a selectable decimal point location.
Two point direct or reverse acting linear scaling values can
be entered manually or by introducing actual sensed process
values in Teach mode. The meter is powered from the mA
loop and requires no external power supply. The 1/32 DIN
housing takes up minimal panel space and the meter face has
an IP65 rating. Configuration parameters can be locked out
to prevent unauthorized or accidental changes to the meter’s
operation. ProSense digital panel meters are backed by a
3 year warranty.
Features:
• 48 x 24mm 1/32 DIN
• Simple menu driven pushbutton configuration
• 4 digit (-1999 to 9999) red LED display
• Selectable decimal point
• Process (4-20mA DC)
• Loop powered
• Display scaling or process teaching modes
• Configuration for direct or reverse acting linear
processes
• Total configuration lock out
• 3 year warranty
DPM1 Series Panel Meters
Model
Description
DPM1-A-LP
Weight (lbs)
Price
0.2
$65.00
ProSense digital panel meter, 1/32 DIN, 4-digit red LED, input current signal range(s) of 4 - 20
mA, loop powered.
Technical Specifications
Input
Current Range
4-20mA
Current Resolution
±0.01mA
Impedance
10Ω
Maximum error
Accuracy
(@ 23ºC ±5ºC)
Temperature coefficient
Conversion
100 ppm/ºC
Warm-Up time
Power Supply
Voltage Drop on Input Loop
±(0.1% of reading ÷3 digits)
5 minutes
Loop powered
4-20 mA
<5V
Technique
Single slope
Resolution
16 bits
Conversion rate
Display
62 times per second
Range
-1999 to 9999, selectable decimal point position
Type
4 digit 10mm (0.4”), red*
Display refresh rate
2 times per second
0vE
Display/input overrange indication
Environmental Conditions
Operating temperature
-10ºC to +60ºC (14ºF to 140ºF)
Storage temperature
-25ºC to +85ºC (-13ºF to 185ºF)
Relative humidity
(non-condensing)
<95% @ 40ºC (104ºF)
Maximum altitude
2000m
Frontal protection degree
IP65
Environmental Air
No corrosive gases permitted
Agency Approvals
CE
* Illumination based on available loop current and will not be as bright as the powered Digital Panel Meters
Book 2 (14.3)
ePS-16
Process Control
1-800-633-0405
Prices as of April 13, 2016. Check Web site for most current prices.
Digital Panel Meters - DPM1
Series 1/32 DIN
Company
Information
Drives
Soft Starters
Connection Terminal
Wiring
Motors
Insertion Tool (included with meter)
-
CN1
1
Insert wires into the proper terminal while using
the insertion tool to open the clip inside the
connector. Release the insertion tool to fix wire
to the terminal.
CN1
2
+
1
(-) 4-20mA loop
2
(+) 4-20mA loop
Power
Transmission
Motion: Servos
and Steppers
Motor Controls
Sensors:
Proximity
Terminal
Connector
CN1
Wire cross section
0.08 to 2.5mm² (28 to 12 AWG)
Strip length
8 to 9mm
Manufacturer
Wago 231-302/026-000
Insertion tool or screwdriver with 0.5 mm
x 3.0 mm blade
Cage clamp connection
Programming Keys
(Bottom View)
Sensors:
Photoelectric
ENTER: Enters configuration and
validates data and parameters.
Sensors:
Encoders
SHIFT: Selects mode or shifts blinking digit
in configuration.
UP: Increases value of blinking digit in
configuration.
Sensors:
Limit Switches
Sensors:
Current
Dimensions
Sensors:
Pressure
mm [inches]
Sensors:
Temperature
Sensors:
Level
Sensors:
Flow
Pushbuttons
and Lights
Stacklights
Signal
Devices
Installation
Dimensions
48 x 24 x 56.8mm (1/32 DIN)
Panel Cutout
45 x 22mm (Max. panel thickness 7mm)
Case Material
Polycarbonate UL 94 V-0
See our website www.AutomationDirect.com for complete Engineering drawings.
Process
Relays and
Timers
Pneumatics:
Air Prep
Pneumatics:
Directional Control
Valves
Pneumatics:
Cylinders
For additional information and configuration details download the complete instructions from www.AutomationDirect.com
Pneumatics:
Tubing
Pneumatics:
Air Fittings
Appendix
Book 2
Terms and
Conditions
www.automationdirect.com/process-controllers
Book 2 (14.3)
Process Control
ePS-17
Prices as of April 13, 2016. Check Web site for most current prices.
Digital Panel Meters - DPM1
Series 1/32 DIN
These models in the ProSense DPM1 series offers a simple,
low cost digital display of analog process and DC voltage
signals. The 4-digit red LED display is easily scaled into any
engineering units from -1999 to 9999 with a selectable
decimal point location. Two point direct or reverse acting
linear scaling values can be entered manually or by introducing actual sensed process values in Teach mode. The
meter is powered from an external AC or DC power supply.
The 1/32 DIN housing takes up minimal panel space and the
meter face has an IP65 rating. Configuration parameters can
be locked out to prevent unauthorized or accidental changes
to the meter’s operation. ProSense digital panel meters are
backed by a 3 year warranty.
Features:
• DC Voltage (±200V, ±20V)
• AC or DC powered
• Display scaling or process teaching
modes
• Configuration for direct or reverse
acting linear processes
• Total configuration lock out
• 3 year warranty
• 48 x 24mm 1/32 DIN
• Simple menu driven pushbutton
configuration
• 4 digit (-1999 to 9999) red LED
display
• Selectable decimal point
• Process (±10V, ±20mA, ±100mV)
DPM1 Series Panel Meters
Model
Description
Weight (lbs)
Price
DPM1-A-H
ProSense digital panel meter, 1/32 DIN, 4-digit red LED, input current signal range(s) of +/- 20
mA, input voltage signal range(s) of +/- 200 VDC, +/- 20 VDC, +/- 10 VDC, +/- 100 mVDC, 85 to
265 VAC / 100 to 300 VDC operating voltage.
0.2
$85.00
DPM1-A-L
ProSense digital panel meter, 1/32 DIN, 4-digit red LED, input current signal range(s) of +/- 20
mA, input voltage signal range(s) of +/- 200 VDC, +/- 20 VDC, +/- 10 VDC, +/- 100 mVDC, 21 to
53 VAC / 10.5 to 70 VDC operating voltage.
0.2
$85.00
Technical Specifications
Input
Range
Resolution
Input Impedance
Voltage
Current
±200V (fixed)
±20V (fixed)
±10V
±100mV
±20mA
0.1V
0.01V
1mV
0.1mV
0.01mA
Volts
1MΩ
mV
100MΩ
mA
Accuracy
(@ 23ºC ±5ºC)
Power Supply and Fuses
±(0.1% of reading ÷3 digits)
Temperature coefficient
100 ppm/ºC
Warm-Up time
5 minutes
DPM1-A-H
85-265VAC 50/60Hz or 100-300VDC
(Recommended fusing, 0.1A/250V, 5mm x 20mm glass miniature or DIN 41661 equivalent)
DPM1-A-L
21-53VAC 50/60Hz or 10.5-70VDC
(Recommended fusing, 0.5A/250V, 5mm x 20mm glass miniature or DIN 41661 equivalent)
Power Consumption
Conversion
20Ω
Maximum error
1.8W
Technique
Sigma-Delta
Resolution
±15 bits
Conversion rate
Display
20 times per second
Range
-1999 to 9999, selectable decimal point position
Type
4 digit 10mm (0.4”), red
Display refresh rate
4 times per second
0vE
Display/input overrange indication
Environmental Conditions
Operating temperature
-10ºC to +60ºC (14ºF to 140ºF)
Storage temperature
Relative humidity
(non-condensing)
Maximum altitude
-25ºC to +85ºC (-13ºF to 185ºF)
<95% @ 40ºC (104ºF)
2000m
Frontal protection degree
Environmental Air
Agency Approvals
IP65
No corrosive gases permitted
CE
Book 2 (14.3)
ePS-18
Process Control
1-800-633-0405
Prices as of April 13, 2016. Check Web site for most current prices.
Digital Panel Meters - DPM1
Series 1/32 DIN
Wiring
Drives
Soft Starters
Motors
CN1
CN1
AC Supply DC Supply
CN2
1
2
3
4
5
1
2
1
Neutral
1 -VDC
2
Line
2 +VDC
Terminals
Connector
CN1
CN2
1
- IN (common)
2
+100mV DC
3
+20mA
4
+10/20VDC
5
+200VDC
Programming Keys
(Bottom View)
CN2
Strip length
0.08 to 2.5mm² (28 to 12
AWG)
8 to 9mm
Manufacturer
Cage clamp connection
Wago 231-202/026-000
Wago 733-105
Insertion tool or screwdriver Insertion tool or screwdriver
with 0.5 mm x 3.0 mm blade with 0.3 mm x 1.8 mm blade
Wire cross section
Company
Information
0.08 to 0.5mm² (28 to 20
AWG)
5 to 6mm
Power
Transmission
Motion: Servos
and Steppers
Motor Controls
Sensors:
Proximity
ENTER: Enters configuration and
validates data and parameters.
SHIFT: Selects mode or shifts blinking digit
in configuration.
UP: Increases value of blinking digit in
configuration.
Sensors:
Photoelectric
Sensors:
Encoders
Sensors:
Limit Switches
Sensors:
Current
CN1 Terminals
Sensors:
Pressure
CN2 Terminals
Sensors:
Temperature
Insertion Tool (included with meter)
Insertion Tool (included with meter)
Insert wires into the proper terminal
while using the insertion tool to open
the clip inside the connector. Release
the insertion tool to fix wire to the
terminal.
Insert wires into the proper terminal
while using the insertion tool to open
the clip inside the connector. Release
the insertion tool to fix wire to the
terminal.
Sensors:
Level
Sensors:
Flow
Pushbuttons
and Lights
Dimensions
Stacklights
mm [inches]
Signal
Devices
Process
Relays and
Timers
Pneumatics:
Air Prep
Pneumatics:
Directional Control
Valves
Dimensions
Panel Cutout
Case Material
Installation
48 x 24 x 95mm (1/32 DIN)
45 x 22mm (Max. panel thickness 7mm)
Polycarbonate UL 94 V-0
See our website www.AutomationDirect.com for complete Engineering drawings.
Pneumatics:
Cylinders
Pneumatics:
Tubing
Pneumatics:
Air Fittings
Appendix
Book 2
For additional information and configuration details download the complete instructions from www.AutomationDirect.com
www.automationdirect.com/process-controllers
Terms and
Conditions
Book 2 (14.3)
Process Control
ePS-19
Prices as of April 13, 2016. Check Web site for most current prices.
Digital Panel Meters - DPM1
Series 1/32 DIN
These models in the ProSense DPM1 series offers a simple,
low cost digital display of temperature in either Fahrenheit or
Celsius from RTD or Thermocouple temperature sensors. The
4-digit red LED display is pre-configured for fixed temperature ranges based on the type of temperature sensor input.
Thermocouples are displayed with 1 degree of resolution
while RTDs can be displayed with either 0.1 or 1 degree of
resolution. The meter is powered from an external AC or DC
power supply. The 1/32 DIN housing takes up minimal panel
space and the meter face has an IP65 rating. Configuration
parameters can be locked out to prevent unauthorized or
accidental changes to the meter’s operation. ProSense digital
panel meters are backed by a 3 year warranty.
Features:
• RTD: Pt100, Resolution: 1°, 0.1°
• TC: J, K, T, N, Resolution: 1°
• AC or DC powered
• Total configuration lock out
• 3 year warranty
• 48 x 24mm 1/32 DIN
• Simple menu driven pushbutton
configuration
• 4 digit red LED display
• Temperature, °F or °C
DPM1 Series Panel Meters
Model
Description
DPM1-T-H
DPM1-T-L
Weight (lbs)
Price
0.2
$85.00
0.2
$85.00
ProSense digital panel meter, 1/32 DIN, 4-digit red LED, input thermocouple type(s): J, K, T, N,
input RTD type(s): Pt100, 85 to 265 VAC / 100 to 300 VDC operating voltage.
ProSense digital panel meter, 1/32 DIN, 4-digit red LED, input thermocouple type(s): J, K, T, N,
input RTD type(s): Pt100, 21 to 53 VAC / 10.5 to 70 VDC operating voltage.
Technical Specifications
Type
RTD: Pt100 (3-wire)
Input / Resolution / Fixed Display
Range
TC “J”
TC “K”
TC “T”
TC “N”
TC Cold Junction
Compensation Range
Pt100 Measuring Current
Pt100 Linearization (α=0.00385)
Pt100 Max. Lead Resistance
Pt100 0.1°
Accuracy Conditions
Power Supply and Fuses
Power Consumption
Conversion
Display
TC J, K, T, N
Temperature coefficient
Warm up time
Temperature
DPM1-T-H
DPM1-T-L
Technique
Resolution
Conversion rate
Range
Type
Display refresh rate
Display/input overrange indication
Operating temperature
Storage temperature
Environmental Conditions
Environmental Air
Agency Approvals
Resolution 0.1°
-200 to 800°C
-328 to 1472°F
-200 to 1100°C
-328 to 2012°F
-200 to 1250°C
-328 to 2282°F
-200 to 400°C
-328 to 752°F
-200 to 1250°C
-328 to 2282°F
-199.9 to 800.0°C
-199.9 to 999.9°F
N/A
-10°C to 60°C (14°F to 140°F)
Pt100 1°
Accuracy
Resolution 1°
Relative humidity (non condensing)
1mA
IEC 60751
40Ω / wire (balanced)
±(0.2%rdg + 1°C) / ±(0.2%rdg + 2°F); t<-50°C/-58°F ±(1%rdg+1°C) / ±(1%rdg+2°F)
±(0.2%rdg + 0.4°C) / ±(0.2%rdg + 0.7°F); t<-50.0°C/-58.0°F ±(1%rdg+0.4°C) / ±(1%rdg+0.7°F)
±(0.4%rdg + 2°C) / ±(0.4%rdg + 4°F); t<-50°C/-58°F ±(1%rdg+2°C) / ±(1%rdg+4°F)
100 ppm/°C
10 minutes
23°C±5°C
85-265VAC 50/60Hz or 100-300VDC
(Recommended fusing, 0.1A/250V, 5mm x 20mm glass miniature or DIN 41661 equivalent)
21-53VAC 50/60Hz or 10.5-70VDC
(Recommended fusing, 0.5A/250V, 5mm x 20mm glass miniature or DIN 41661 equivalent)
1.8W
Sigma-Delta
±15 bits
25 times per second
-1999 to 9999
4 digit 10mm (0.4”), red
4 times per second
0vE
-10ºC to +60ºC (14ºF to 140ºF)
-25ºC to +85ºC (-13ºF to 185ºF)
<95% @ 40ºC (104ºF)
Maximum altitude
Frontal protection degree
2000m
IP65
No corrosive gases permitted
CE
Book 2 (14.3)
ePS-20
Process Control
1-800-633-0405
Prices as of April 13, 2016. Check Web site for most current prices.
Digital Panel Meters - DPM1
Series 1/32 DIN
Company
Information
Drives
Soft Starters
Wiring
Motors
CN1
CN2
1
CN1
AC Supply DC Supply
1
2
2
3
1
Neutral
1 -VDC
2
Line
2 +VDC
Power
Transmission
CN2
1
-TC / Common Pt100
2
+TC / Common Pt100
3
Pt100
Motion: Servos
and Steppers
Motor Controls
Sensors:
Proximity
Terminals
Connector
CN1
CN2
Wire cross section
0.08 to 2.5mm² (28 to 12 AWG)
0.08 to 2.5mm² (28 to 12 AWG)
Strip length
8 to 9mm
8 to 9mm
Manufacturer
Wago 231-202/026-000
Wago 231-303/026-000
Insertion tool or screwdriver with 0.5 mm Insertion tool or screwdriver with 0.5 mm
x 3.0 mm blade
x 3.0 mm blade
Cage clamp connection
CN1 and CN2 Terminals
Programming Keys
(Bottom View)
Insertion Tool (included with meter)
Insert wires into the proper terminal while using
the insertion tool to open the clip inside the
connector. Release the insertion tool to fix wire
to the terminal.
Sensors:
Photoelectric
Sensors:
Encoders
Sensors:
Limit Switches
Sensors:
Current
ENTER: Enters configuration and
validates data and parameters.
SHIFT: Selects mode or shifts blinking digit
in configuration.
UP: Increases value of blinking digit in
configuration.
Sensors:
Pressure
Sensors:
Temperature
Sensors:
Level
Sensors:
Flow
Dimensions
Pushbuttons
and Lights
mm [inches]
Stacklights
Signal
Devices
Process
Relays and
Timers
Pneumatics:
Air Prep
Dimensions
Panel Cutout
Case Material
Installation
See our website www.AutomationDirect.com for complete Engineering drawings.
48 x 24 x 95mm (1/32 DIN)
45 x 22mm (Max. panel thickness 7mm)
Polycarbonate UL 94 V-0
Pneumatics:
Directional Control
Valves
Pneumatics:
Cylinders
Pneumatics:
Tubing
Pneumatics:
Air Fittings
Appendix
Book 2
For additional information and configuration details download the complete instructions from www.AutomationDirect.com
Terms and
Conditions
www.automationdirect.com/process-controllers
Book 2 (14.3)
Process Control
ePS-21
Prices as of April 13, 2016. Check Web site for most current prices.
Digital Panel Meters - DPM1
Series 1/32 DIN
These models in the ProSense DPM1 series offers a simple,
low cost digital display of analog process signals. The 4-digit
red LED display is easily scaled into any engineering units
from -1999 to 9999 with a selectable decimal point location.
Two point direct or reverse acting linear scaling values can
be entered manually or by introducing actual sensed process
values in Teach mode. Additionally non-linear processes
can be scaled by entering up to 16 scaling points. Two SPST
relay outputs are included that can be set to activate on an
increasing or decreasing input signal with hysteresis or time
delay operation. Models are also available with a 0/4-20mA
analog output. The meter is powered from an external AC
or DC power supply and provides 20VDC for external sensor
excitation. The 1/32 DIN housing takes up minimal panel
space and the meter face has an IP65 rating. Configuration
parameters can be totally or selectively locked out to prevent
unauthorized or accidental changes to the meter’s operation.
Other features include memory and reset of minimum and
maximum display values, a tare function, filtering to minimize
display bounce, and display brightness adjustment. ProSense
digital panel meters are backed by a 3 year warranty.
Features:
• 48 x 24mm 1/32 DIN
• Simple menu driven pushbutton configuration
• 4 digit (-1999 to 9999) red LED display
• Selectable decimal point
• Process (±10V, ±60V, ±100mV, ±20mA)
• AC or DC powered
• Sensor excitation voltage 20V
• (2) Form A SPST normally open relays
Activation on increasing or
decreasing input signal
Hysteresis or time delay
operation
• 0/4-20mA analog output on select units
• Total or selective configuration lock out
• Display scaling or process teaching
modes
• Configuration for direct or reverse
acting linear processes and up to 16
point non-linear processes
• Minimum and maximum value memory
• Tare function
• Filtering to minimize display bounce
• Display brightness adjustment
• 3 year warranty
DPM1 Series Panel Meters
Model
Description
Weight (lbs)
Price
DPM1-A-2R-H
ProSense digital panel meter, 1/32 DIN, 4-digit red LED, input current signal range(s) of +/- 20
mA, input voltage signal range(s) of +/- 60 VDC, +/- 10 VDC, +/- 100 mVDC, (2) Form A (SPST)
relay(s), 5A @ 250 VAC, 5A @ 30 VDC, 85 to 265 VAC / 100 to 300 VDC operating voltage.
0.3
$95.00
DPM1-A-2R-L
ProSense digital panel meter, 1/32 DIN, 4-digit red LED, input current signal range(s) of +/- 20
mA, input voltage signal range(s) of +/- 60 VDC, +/- 10 VDC, +/- 100 mVDC, (2) Form A (SPST)
relay(s), 5A @ 250 VAC, 5A @ 30 VDC, 21 to 53 VAC / 10.5 to 70 VDC operating voltage.
0.3
$95.00
DPM1-A-A2R-H
ProSense digital panel meter, 1/32 DIN, 4-digit red LED, input current signal range(s) of +/- 20
mA, input voltage signal range(s) of +/- 60 VDC, +/- 10 VDC, +/- 100 mVDC, output current signal range(s) of 0/4-20 mA, (2) Form A (SPST) relay(s), 5A @ 250 VAC, 5A @ 30 VDC, 85 to 265
VAC / 100 to 300 VDC operating voltage.
0.3
$100.00
DPM1-A-A2R-L
ProSense digital panel meter, 1/32 DIN, 4-digit red LED, input current signal range(s) of +/- 20
mA, input voltage signal range(s) of +/- 60 VDC, +/- 10 VDC, +/- 100 mVDC, output current signal range(s) of 0/4-20 mA, (2) Form A (SPST) relay(s), 5A @ 250 VAC, 5A @ 30 VDC, 21 to 53
VAC / 10.5 to 70 VDC operating voltage.
0.3
$100.00
Book 2 (14.3)
ePS-22
Process Control
1-800-633-0405
Prices as of April 13, 2016. Check Web site for most current prices.
Digital Panel Meters - DPM1
Series 1/32 DIN
Company
Information
Drives
Soft Starters
Technical Specifications
Range
Resolution
Input Impedance
Accuracy
Power
Transmission
±10V
1mV
1MΩ
±(0.1% rdg+3mV)
Motion: Servos
and Steppers
±60V
3mV
1MΩ
±(0.1% rdg+18mV)
±100mV
10µV
100MΩ
±(0.1% rdg+30µV)
±20mA
1µA
12.1Ω
±(0.1% rdg+6µA)
Input
Sensor Excitation
Accuracy Conditions
Conversion
Motors
Display
Temperature coefficient
100ppm/°C
Warm-up time
15 minutes
Temperature
23°C±5°C
Technique
Sigma-Delta
Resolution
±15 bits
Range
-1999 to +9999, selectable decimal point position
Type
4 digit 8mm (0.31), red
LEDs
Relay 1, Relay 2, Tare, Programming Mode
Analog Output (0/4-20mA Sourcing)
(Models DPM1-A-A2R-H &
DPM1-A-A2R-L only)
Filter
Environmental Conditions
Sensors:
Temperature
Sensors:
Level
Sensors:
Flow
Pushbuttons
and Lights
Stacklights
[email protected] / 30VDC
Resolution
5.5µA
Accuracy
±(0.3% rdg+40µA)
Temperature coefficient
DPM1-A-2R-L, DPM1-A-A2R-L
Sensors:
Pressure
10s
Signal
Devices
Process
Relays and
Timers
3µA/°C
≤500Ω
Maximum load
Power Supply and Fuses
Sensors:
Current
"-OuE” , “OuE”
Relays refresh, maximum and minimum value
2 Relays (Form A) SPST normally
open
DPM1-A-2R-H, DPM1-A-A2R-H
Sensors:
Limit Switches
5 times per second
Display / Input overrange indication
Relays
Sensors:
Encoders
25 times per second
Display refresh rate
85-265VAC 50/60Hz or 100-300VDC
(Recommended fusing 0.2A/250V, 5mm x 20mm glass miniature or DIN 41661 equivalent)
21-53VAC 50/60Hz or 10.5-70VDC
(Recommended fusing 1.0A/250V, 5mm x 20mm glass miniature or DIN 41661 equivalent)
Cutoff frequency
0.4Hz to 0.004Hz
Slope
Operating temperature
-10ºC to +60ºC (14ºF to 140ºF)
Storage temperature
-25ºC to +85ºC (-13ºF to 185ºF)
Pneumatics:
Air Fittings
Appendix
Book 2
2000m
Frontal protection degree
Terms and
Conditions
IP65
Environmental Air
No corrosive gases permitted
Agency Approvals
CE
www.automationdirect.com/process-controllers
Book 2 (14.3)
Process Control
Pneumatics:
Directional Control
Valves
Pneumatics:
Tubing
<95% @ 40ºC (104ºF)
Maximum altitude
Pneumatics:
Air Prep
Pneumatics:
Cylinders
20dB/Dec.
Relative humidity (non condensing)
Sensors:
Proximity
Sensors:
Photoelectric
20V±5VDC @ 30mA
Conversion rate
Motor Controls
ePS-23
Prices as of April 13, 2016. Check Web site for most current prices.
Digital Panel Meters - DPM1
Series 1/32 DIN
Wiring
CN1
AC Supply DC Supply
CN4
CN5
1
1
CN1
2
2
1
2
CN2
2 1
5 4 3 2 1
CN3
Neutral
2 +VDC
4
-IN / - Excitation
CN3*
5
+Excitation
(20V±5VDC @ 30mA)
CN1
CN2
CN3
CN4
CN5
0.08 to 2.5mm²
(28 to 12 AWG)
0.08 to 0.5mm²
(28 to 20 AWG)
0.08 to 0.5mm²
(28 to 20 AWG)
0.08 to 2.5mm²
(28 to 12 AWG)
0.08 to 2.5mm²
(28 to 12 AWG)
Strip length
8 to 9mm
5 to 6mm
5 to 6mm
8 to 9mm
8 to 9mm
Cage clamp
connection
Wago 231102/026-000
Insertion tool or Insertion tool or Insertion tool or
screwdriver with screwdriver with screwdriver with
0.3 mm x 1.8
0.3 mm x 1.8
0.5 mm x 3.0
mm blade
mm blade
mm blade
CN2 and CN3 Terminals
+100mV
2
3
Connector
Wago 733-102
+20mA DC
1 -VDC
Analog output terminals
(DPM1-A-A2R-H &
DPM1-A-A2R-L only)
Wago 733-105
2
Line
Wire cross section
Wago 231202/026-000
Insertion tool or
screwdriver with
0.5 mm x 3.0
mm blade
+60V / +10VDC
1
Terminals
Manufacturer
CN2
1
Wago 231302/026-000
Insertion tool or
screwdriver with
0.5 mm x 3.0
mm blade
1
-0/4-20mA
2
+0/4-20mA
* Analog output terminals (DPM1-A-A2R-H &
DPM1-A-A2R-L only)
CN4
Relay 1
1
2
N.O. Contact
CN5
Relay 2
1
2
N.O. Contact
CN1, CN4 and CN5 Terminals
Insertion Tool (included with meter)
Insertion Tool (included with meter)
Insert wires into the proper terminal
while using the insertion tool to open
the clip inside the connector. Release
the insertion tool to fix wire to the
terminal.
Insert wires into the proper terminal
while using the insertion tool to open
the clip inside the connector. Release
the insertion tool to fix wire to the
terminal.
Dimensions
mm [inches]
Dimensions
Panel Cutout
Case Material
Installation
48 x 24 x 125.1mm (1/32 DIN)
45 x 22mm (Max. panel thickness 7mm)
Polycarbonate UL 94 V-0
See our website www.AutomationDirect.com for complete Engineering drawings.
Programming Keys
(Bottom View)
ENTER: Enters configuration and
validates data and parameters.
SHIFT: Selects mode or shifts blinking digit
in configuration.
UP: Increases value of blinking digit in
configuration.
For additional information and configuration details download the complete instructions from www.AutomationDirect.com
Book 2 (14.3)
ePS-24
Process Control
1-800-633-0405
Prices as of April 13, 2016. Check Web site for most current prices.
Digital Panel Meters - DPM2
Series 1/8 DIN
The ProSense DPM2 series offers a
simple, low cost digital display of
analog process signals, temperature in
either Fahrenheit or Celsius from RTD
or thermocouple temperature sensors,
or potentiometer inputs. The 4-digit red
LED display is easily scaled into any
engineering units from -9999 to 9999
with a selectable decimal point location. Two point direct or reverse acting
linear scaling values can be entered
manually or by introducing actual
sensed process values in Teach mode.
Temperature inputs are pre-configured
for fixed temperature ranges based on
the type of temperature sensor and can
be displayed with 1 or 0.1 degree of
resolution. One model includes two
Company
Information
Drives
SPDT relay outputs that can be set to
activate on an increasing or decreasing
input signal with hysteresis or time
delay operation. The meter is powered
from an external wide range AC or DC
power supply and provides 24VDC for
external sensor excitation. The 1/8 DIN
housing is easy to install in a panel
and the meter face has an IP65 rating.
Configuration parameters can be totally
or selectively locked out to prevent
unauthorized or accidental changes
to the meter’s operation. Additionally,
the DPM2 meters include memory and
reset of minimum and maximum display
values. ProSense digital panel meters
are backed by a 3 year warranty.
Motors
Power
Transmission
Motion: Servos
and Steppers
Motor Controls
Sensors:
Proximity
Sensors:
Photoelectric
Sensors:
Encoders
Sensors:
Limit Switches
Sensors:
Current
Features:
• Sensor excitation voltage 24V
• Optional (2) Form C SPDT relays
N.O. or N.C. operation
Activation on increasing or decreasing input signal
Hysteresis or time delay operation
• Display scaling or process teaching modes
• Configuration for direct or reverse acting linear processes
• Minimum and maximum value memory
• Total or selective configuration lock out
• 3 year warranty
• 96 x 48mm 1/8 DIN
• S imple menu driven pushbutton configuration
• 4 digit (-9999 to 9999) red LED display
• Selectable decimal point
• Process (±10V, ±200V and ±20mA)
• T emperature (RTD: Pt100, Pt1000, TC: J, K, T, N, Resolution: 1°F,
0.1°F, 1°C, 0.1°C)
• Potentiometer (100Ω to 100kΩ)
•R
esistance (999.9Ω, 9999Ω and 50kΩ)
• AC or DC powered
Soft Starters
Sensors:
Pressure
Sensors:
Temperature
Sensors:
Level
Sensors:
Flow
Pushbuttons
and Lights
Stacklights
DPM2 Series Panel Meters
Model
DPM2-AT-HL
DPM2-AT-2R-HL
Description
ProSense digital panel meter, 1/8 DIN, 4-digit red LED, input current signal range(s) of +/- 20 mA,
input voltage signal range(s) of +/- 200 VDC, +/- 10 VDC, input thermocouple type(s): J, K, T, N,
input RTD type(s): Pt100 and Pt1000, input potentiometer signal range(s) of 100 to 100k Ohms,
20 to 265 VAC / 11 to 265 VDC operating voltage.
ProSense digital panel meter, 1/8 DIN, 4-digit red LED, input current signal range(s) of +/- 20 mA,
input voltage signal range(s) of +/- 200 VDC, +/- 10 VDC, input thermocouple type(s): J, K, T, N,
input RTD type(s): Pt100 and Pt1000, input potentiometer signal range(s) of 100 to 100k Ohms,
(2) Form C (SPDT) relay(s), 8A @ 250 VAC, 8A @ 24 VDC, 20 to 265 VAC / 11 to 265 VDC
operating voltage.
Signal
Devices
Weight (lbs)
Price
0.6
$100.00
Process Input
Input
Impedance
±20mA
±10V
0.6
$110.00
±200V
Accuracy
<20Ω
2µA
±(0.1% rdg+15µA)
2MΩ
1mV
±(0.1% rdg+6mV)
2MΩ
20mV
Potentiometer
Resistance
Pneumatics:
Tubing
Pneumatics:
Air Fittings
±(0.1% rdg+0.1V)
Appendix
Book 2
24V±3V @ 30mA
Range
Maximum
Measurement Resolution
Current
Accuracy
100-100kΩ
<0.4mA
0.01% F.S.
±(0.1% rdg+0.05% F.S.)
999.9Ω
2.3mA
0.1Ω
±(0.1% rdg+0.7Ω)
9999Ω
230µA
1Ω
±(0.1% rdg+6Ω)
50kΩ
23µA
10Ω
±(0.1% rdg+35Ω)
www.automationdirect.com/process-controllers
Pneumatics:
Directional Control
Valves
Pneumatics:
Cylinders
Resolution
Sensor Excitation
Relays and
Timers
Pneumatics:
Air Prep
Technical Specifications
Range
Process
Terms and
Conditions
Book 2 (14.3)
Process Control
ePS-25
Prices as of April 13, 2016. Check Web site for most current prices.
Digital Panel Meters - DPM2
Series 1/8 DIN
Technical Specifications Continued
RTD
Pt100 (3 wire)
Pt1000 (2 wire)
-200.0°C to 800.0°C / 0.1°C
-200°C to 800°C / 1°C
-328.0°F to 999.9°F / 0.1°F
-328°F to 1472°F / 1°F
Fixed Display Range /
Resolution
Measurement current
Maximum resistance per
wire
1mA
100µA
40Ω (balanced)
-
Linearization
Temperature
IEC 60751
Coefficient
0.00385
Accuracy
±(0.15% rdg+0.5°C), t<-50°C ±(1% rdg+0.5°C)
±(0.15% rdg+0.9°F), t<-58°F ±(1% rdg+0.9°F)
Thermocouple
Fixed Display Range /
Resolution
J
K
-150.0°C to 999.9°C / 0.1°C
-150°C to 1100°C / 1°C
-238.0°F to 999.9°F / 0.1°F
-238°F to 2012°F / 1°F
-10°C to 60°C (14°F to 140°F)
±(0.1% rdg+0.6°C)
±(0.1% rdg+1.1°F)
±(0.2% rdg+0.8°C)
±(0.2% rdg+1.5°F)
Technique
Conversion
Resolution
±16 bits
20 times per second
Range
-9999 to +9999, selectable decimal point position
Type
4 digit 14mm (0.55”), red
LEDs
Relay 1, Relay 2
Display refresh rate
20 times per second
Display / Input overrange
indication
"-OuE” , “OuE”
Temperature coefficient
100 ppm/°C
Accuracy Conditions Warm-up time
5 minutes
Temperature
Relays
(DPM2-AT-2RL-HL
only)
2 Relays SPDT
Power Supply and
Fuses
Power Consumption
23°C±5°C
Nominal contact rating..................................8A at 250VAC / 24VDC
Maximum switching current (resistive load)..................................8A
Maximum switching power.......................................2000VA / 192W
Maximum switching voltage.................................400VAC / 125VDC
Contact resistance.......................................≤100mΩ at 6VDC @ 1A
Contact type................................................................................SPDT
Operate time.............................................................................≤10ms
20-265VAC 50/60 Hz or 11-265VDC
(Recommended fusing 3A/250V, 5mm x 20mm glass miniature or DIN 41661 equivalent)
3W
Cutoff frequency (-3dB)
Filter
7.3Hz to 0.2Hz
Slope
Environmental
Conditions
±(0.1% rdg+0.6°C)
±(0.1% rdg+1.1°F)
Sigma-Delta
Conversion rate
Display
N
-150.0°C to 999.9°C / 0.1°C -150.0°C to 400.0°C / 0.1°C -150.0°C to 999.9°C / 0.1°C
-150°C to 1200°C / 1°C
-150°C to 400°C / 1°C
-150°C to 1300°C / 1°C
-238.0°F to 999.9°F / 0.1°F -238.0°F to 752.0°F / 0.1°F -238.0°F to 999.9°F / 0.1°F
-238°F to 2192°F / 1°F
-238°F to 752°F / 1°F
-238°F to 2372°F / 1°F
Cold junction
compensation range
Accuracy
T
-20dB/Dec.
Operating temperature
-10ºC to +60ºC (14ºF to 140ºF)
Storage temperature
-25ºC to +85ºC (-13ºF to 185ºF)
Relative humidity
(non-condensing)
<95% @ 40ºC (104ºF)
Maximum altitude
2000m
Frontal protection degree
IP65
Environmental Air
No corrosive gases permitted
Agency Approval
CE
Book 2 (14.3)
ePS-26
Process Control
1-800-633-0405
Prices as of April 13, 2016. Check Web site for most current prices.
Digital Panel Meters - DPM2
Series 1/8 DIN
Company
Information
Drives
Soft Starters
Motors
Wiring
Power
Transmission
Output relay terminals
(DPM2-AT-2R-HL only)
CN4
CN3
1
4
5
2
6
3
AC Supply DC Supply
CN1
1
CN2
2
1
Line
1 VDC
2
Neutral
2 VDC
Polarity insensitive for
DC power
1 2 3 4 5 6 7
Motion: Servos
and Steppers
CN2
CN1
1
Common / RTD B / -TC / Pot. Term. 1
2
RTD A / +TC / 10kΩ res. / Pot. center
3
50kΩ res. / Pot. Term. 2
4
RTD B Pt100
5
+20mA
6
Excitation +24V
7
+10/200VDC
Motor Controls
Sensors:
Proximity
Sensors:
Photoelectric
Sensors:
Encoders
Sensors:
Limit Switches
Note: For additional wiring information download complete manual
from www.AutomationDirect.com
Sensors:
Current
(DPM2-AT-2R-HL only)
Terminals
Connector
CN1
CN2
Wire cross section
0.08 to 2.5mm²
(28 to 12 AWG)
0.08 to 1.5mm²
(28 to 14 AWG)
0.08 to 2.5mm²
(28 to 12 AWG)
CN3 & CN4
4
NO2
1
NO1
5
CM2
2
CM1
Strip length
8 to 9mm
6 to 7mm
8 to 9mm
6
NC2
3
NC1
Manufacturer
Wago 231-202/026-000 Wago 734-107
Wago 231-303/026-000
Cage clamp
connection
Insertion tool or
Insertion tool or
Insertion tool or
screwdriver with 0.5 mm screwdriver with 0.3 mm screwdriver with 0.5 mm
x 3.0 mm blade
x 1.8 mm blade
x 3.0 mm blade
NO: Normally open contact.
CM: Common
NC: Normally closed contact.
CN4 (Relay 2)
CN3 (Relay 1)
Sensors:
Pressure
Sensors:
Temperature
Sensors:
Level
Sensors:
Flow
Pushbuttons
and Lights
Stacklights
CN1, CN3, CN4 Terminals
CN2 Terminals
Signal
Devices
Insertion Tool (included with meter)
Insertion Tool (included with meter)
Insert wires into the proper terminal
while using the insertion tool to open
the clip inside the connector. Release
the insertion tool to fix wire to the
terminal.
Insert wires into the proper terminal
while using the insertion tool to open
the clip inside the connector. Release
the insertion tool to fix wire to the
terminal.
Process
Relays and
Timers
Pneumatics:
Air Prep
Pneumatics:
Directional Control
Valves
Pneumatics:
Cylinders
Pneumatics:
Tubing
Pneumatics:
Air Fittings
Appendix
Book 2
Terms and
Conditions
www.automationdirect.com/process-controllers
Book 2 (14.3)
Process Control
ePS-27
Prices as of April 13, 2016. Check Web site for most current prices.
Digital Panel Meters - DPM2
Series 1/8 DIN
Programming Panel
2
1
1
3
UP
SHIFT
DATA
2
9
ENTER
4
5
6
7
8
Programming Panel
#
Description
Run Mode
Programming Mode
1
4 digit display Red
Shows value according to configuration. Shows steps and data during configuration.
2
Minus sign
Illuminates for negative readings.
3
Keyboard
4
Setpoint 1 LED
5
UP key
6
SHIFT key
Displays maximum and minimum
stored values. After 3s of pressing, sets
Shifts active digit to the next right digit.
maximum and/or minimum memorized
value to current display value.
7
DATA/ENTER key
Changes to PRO mode.
8
Setpoint 2 LED
Illuminates when Setpoint 2 turns active. Illuminates when Setpoint 2 turns active.
9
Free space for units label
Illuminates for negative values.
---
---
Illuminates when setpoint 1 turns active. Illuminates when setpoint 1 turns active.
Shows setpoint value. Increases value of active
No application
digit.
Validates selected data and parameters.
Moves one step forward in configuration menu.
Changes to RUN mode.
---
---
Dimensions
mm [inches]
Dimensions
Panel Cutout
Case Material
Installation
See our website www.AutomationDirect.com for complete Engineering drawings.
96 x 48 x 83.1mm (1/8 DIN)
92 x 45mm (Max. panel thickness 10mm)
Polycarbonate UL 94 V-0
For additional information and configuration details download the complete instructions from www.AutomationDirect.com
Book 2 (14.3)
ePS-28
Process Control
1-800-633-0405
Prices as of April 13, 2016. Check Web site for most current prices.
Digital Panel Meters - DPM3
Series 1/8 DIN
Company
Information
Drives
Soft Starters
Motors
Power
Transmission
Motion: Servos
and Steppers
Motor Controls
Sensors:
Proximity
Sensors:
Photoelectric
Sensors:
Encoders
Sensors:
Limit Switches
Sensors:
Current
Sensors:
Pressure
The ProSense DPM3 series offers a simple, feature packed
digital display of analog process signals, temperature in either
Fahrenheit or Celsius from RTD or thermocouple temperature
sensors, load cell, or potentiometer inputs. The 5-digit tricolor red, green or amber LED display is easily scaled into any
engineering units from -19999 to 39999 with a selectable
decimal point location. Two point direct or reverse acting
linear scaling values can be entered manually or by introducing
actual sensed process values in Teach mode. Non-linear
processes can be scaled by entering up to 11 scaling points.
Models are available with two SPDT or four SPST relay outputs
that can be set to activate on an increasing or decreasing input
signal with hysteresis or time delay operation. Additionally the
display color can be set to change on relay operation. Models
are also available with a 4-20mA analog output. The meter
is powered from an external AC or DC power supply and
provides both 24VDC and 10VDC for external sensor excitation. The 1/8 DIN housing is easy to install in a panel and the
meter face has an IP65 rating. Configuration parameters can
be totally or selectively locked out to prevent unauthorized or
accidental changes to the meter’s operation. Other features
include memory and reset of minimum and maximum display
values, three tare functions, display hold function, filtering to
minimize display bounce, and display brightness adjustment.
ProSense digital panel meters are backed by a 3 year warranty.
Sensors:
Level
Sensors:
Flow
Pushbuttons
and Lights
Stacklights
Signal
Devices
Process
Relays and
Timers
Features:
• 96 x 48mm 1/8 DIN
• S imple menu driven pushbutton configuration
• 5 digit (-19999 to 39999) tri-color (red, green, amber) LED display
• Selectable decimal point
• Process (±10V, ±20mA)
• T emperature (RTD: Pt100, TC: J, K, T, N, Resolution: 1°F, 0.1°F, 1°C,
0.1°C)
• Potentiometer
• L oad cell (±15mV, ±30mV, ±150mV)
• AC or DC powered
• Sensor excitation voltage 24V and 10V
• Display scaling or process teaching modes
• 4-20mA analog output on select models
Sensors:
Temperature
• (2) Form C SPDT or (4) Form A SPST relays on select models
Activation on increasing or decreasing input signal
Hysteresis or time delay operation
Display color change on relay operation
• Configuration for direct or reverse acting linear
processes and up to 11 point non-linear processes
• Total or selective configuration lock out
• Programmable functions include:
Minimum and maximum value memory
Minimum and maximum value reset
Tare
Hold
• Filtering to minimize display bounce
• Display brightness adjustment
• 3 year warranty
www.automationdirect.com/process-controllers
Book 2 (14.3)
Process Control
ePS-29
Pneumatics:
Air Prep
Pneumatics:
Directional Control
Valves
Pneumatics:
Cylinders
Pneumatics:
Tubing
Pneumatics:
Air Fittings
Appendix
Book 2
Terms and
Conditions
Prices as of April 13, 2016. Check Web site for most current prices.
Digital Panel Meters - DPM3
Series 1/8 DIN
DPM3 Series Panel Meters
Model
Description
Weight (lbs)
Price
DPM3-AT-H
ProSense digital panel meter, 1/8 DIN, 5-digit tri-color (red, green, amber) LED, input current signal range(s) of +/- 20
mA, input voltage signal range(s) of +/- 10 VDC, +/- 150 mVDC, +/- 30 mVDC, +/- 15 mVDC, input thermocouple
type(s): J, K, T, N, input RTD type(s): Pt100, 85 to 265 VAC / 100 to 300 VDC operating voltage.
0.6
$125.00
DPM3-AT-2R-H
ProSense digital panel meter, 1/8 DIN, 5-digit tri-color (red, green, amber) LED, input current signal range(s) of +/- 20
mA, input voltage signal range(s) of +/- 10 VDC, +/- 150 mVDC, +/- 30 mVDC, +/- 15 mVDC, input thermocouple
type(s): J, K, T, N, input RTD type(s): Pt100, (2) Form C (SPDT) relay(s), 8A @ 250 VAC, 8A @ 24 VDC, 85 to 265 VAC /
100 to 300 VDC operating voltage.
0.7
$140.00
DPM3-AT-4R-H
ProSense digital panel meter, 1/8 DIN, 5-digit tri-color (red, green, amber) LED, input current signal range(s) of +/- 20
mA, input voltage signal range(s) of +/- 10 VDC, +/- 150 mVDC, +/- 30 mVDC, +/- 15 mVDC, input thermocouple
type(s): J, K, T, N, input RTD type(s): Pt100, (4) Form A (SPST) relay(s), 5A @ 250 VAC, 5A @ 30 VDC, 85 to 265 VAC /
100 to 300 VDC operating voltage.
0.7
$150.00
DPM3-AT-A-H
ProSense digital panel meter, 1/8 DIN, 5-digit tri-color (red, green, amber) LED, input current signal range(s) of +/- 20
mA, input voltage signal range(s) of +/- 10 VDC, +/- 150 mVDC, +/- 30 mVDC, +/- 15 mVDC, input thermocouple
type(s): J, K, T, N, input RTD type(s): Pt100, output current signal range(s) of 4 - 20 mA, 85 to 265 VAC / 100 to 300
VDC operating voltage.
0.7
$140.00
DPM3-AT-A2R-H
ProSense digital panel meter, 1/8 DIN, 5-digit tri-color (red, green, amber) LED, input current signal range(s) of +/- 20
mA, input voltage signal range(s) of +/- 10 VDC, +/- 150 mVDC, +/- 30 mVDC, +/- 15 mVDC, input thermocouple
type(s): J, K, T, N, input RTD type(s): Pt100, output current signal range(s) of 4 - 20 mA, (2) Form C (SPDT) relay(s), 8A
@ 250 VAC, 8A @ 24 VDC, 85 to 265 VAC / 100 to 300 VDC operating voltage.
0.7
$155.00
DPM3-AT-L
ProSense digital panel meter, 1/8 DIN, 5-digit tri-color (red, green, amber) LED, input current signal range(s) of +/- 20
mA, input voltage signal range(s) of +/- 10 VDC, +/- 150 mVDC, +/- 30 mVDC, +/- 15 mVDC, input thermocouple
type(s): J, K, T, N, input RTD type(s): Pt100, 22 to 53 VAC / 10.5 to 70 VDC operating voltage.
0.6
$125.00
DPM3-AT-2R-L
ProSense digital panel meter, 1/8 DIN, 5-digit tri-color (red, green, amber) LED, input current signal range(s) of +/- 20
mA, input voltage signal range(s) of +/- 10 VDC, +/- 150 mVDC, +/- 30 mVDC, +/- 15 mVDC, input thermocouple
type(s): J, K, T, N, input RTD type(s): Pt100, (2) Form C (SPDT) relay(s), 8A @ 250 VAC, 8A @ 24 VDC, 22 to 53 VAC /
10.5 to 70 VDC operating voltage.
0.7
$140.00
DPM3-AT-4R-L
ProSense digital panel meter, 1/8 DIN, 5-digit tri-color (red, green, amber) LED, input current signal range(s) of +/- 20
mA, input voltage signal range(s) of +/- 10 VDC, +/- 150 mVDC, +/- 30 mVDC, +/- 15 mVDC, input thermocouple
type(s): J, K, T, N, input RTD type(s): Pt100, (4) Form A (SPST) relay(s), 5A @ 250 VAC, 5A @ 30 VDC, 22 to 53 VAC /
10.5 to 70 VDC operating voltage.
0.7
$150.00
DPM3-AT-A-L
ProSense digital panel meter, 1/8 DIN, 5-digit tri-color (red, green, amber) LED, input current signal range(s) of +/- 20
mA, input voltage signal range(s) of +/- 10 VDC, +/- 150 mVDC, +/- 30 mVDC, +/- 15 mVDC, input thermocouple
type(s): J, K, T, N, input RTD type(s): Pt100, output current signal range(s) of 4 - 20 mA, 22 to 53 VAC / 10.5 to 70 VDC
operating voltage.
0.7
$140.00
DPM3-AT-A2R-L
ProSense digital panel meter, 1/8 DIN, 5-digit tri-color (red, green, amber) LED, input current signal range(s) of +/- 20
mA, input voltage signal range(s) of +/- 10 VDC, +/- 150 mVDC, +/- 30 mVDC, +/- 15 mVDC, input thermocouple
type(s): J, K, T, N, input RTD type(s): Pt100, output current signal range(s) of 4 - 20 mA, (2) Form C (SPDT) relay(s), 8A
@ 250 VAC, 8A @ 24 VDC, 22 to 53 VAC / 10.5 to 70 VDC operating voltage.
0.7
$155.00
Book 2 (14.3)
ePS-30
Process Control
1-800-633-0405
Prices as of April 13, 2016. Check Web site for most current prices.
Digital Panel Meters - DPM3
Series 1/8 DIN
Company
Information
Drives
Soft Starters
Technical Specifications
Process
Range
Input Impedance
Accuracy
Resolution
Power
Transmission
±10VDC
1MΩ
±(0.1% rdg + 1 digit)
1mV
Motion: Servos
and Steppers
±20mA DC
15Ω
±(0.1% rdg + 1 digit)
1µA
Sensor
Excitation
Potentiometer
Range
Input Impedance
Accuracy
Resolution
200Ω minimum
1MΩ
±(0.1% rdg + 1 digit)
0.005%
Input Impedance
Accuracy
Resolution
±15mV, ±30mV, ±150mV
100MΩ
±(0.1% rdg + 1 digit)
1µV
Sensors:
Limit Switches
Sensors:
Current
Sensors:
Pressure
10V @ 60mA
Pt100 (3-Wire)
Fixed display range /
resolution
-200.0°C to 800.0°C / 0.1°C
-200°C to 800°C / 1°C
-328.0°F to 1472.0°F/ 0.1°F
-328°F to 1472°F / 1°F
Accuracy / resolution
±(0.2% rdg+0.6°C) / 0.1°C
±(0.2% rdg+1°C) 1°C
±(0.2% rdg+1°F) / 0.1°F
±(0.2% rdg+2°F)
Pt100 sensor excitation
Thermocouple
J
-150.0°C to 1100.0°C / 0.1°C
-150°C to 1100°C / 1°C
-238.0°F to 2012.0°F / 0.1°F
-238°F to 2012°F / 1°F
Accuracy / resolution
±(0.4% rdg+0.6°C) / 0.1°C
±(0.4% rdg+1°C) 1°C
±(0.4% rdg+1°F) / 0.1°F
±(0.4% rdg+2°F) / 1°F
Offset programmable
Sensors:
Level
Sensors:
Flow
Pushbuttons
and Lights
Stacklights
Signal
Devices
40Ω / cable (balanced)
Fixed display range /
resolution
Cold junction compensation
range
Sensors:
Temperature
<1mA DC
Max lead resistance
K
T
N
-150.0°C to 1200.0°C / 0.1°C -200.0°C to 400.0°C / 0.1°C -150.0°C to 1300.0°C / 0.1°C
-150°C to 1200°C / 1°C
-200°C to 400°C / 1°C
-150°C to 1300°C / 1°C
-238.0°F to 2192.0°F / 0.1°F -328.0°F to 752.0°F / 0.1°F -238.0°F to 2372.0°F / 0.1°F
-238°F to 2192°F / 1°F
-328°F to 752°F / 1°F
-238°F to 2372°F / 1°F
±(0.4% rdg+0.6°C) / 0.1°C
±(0.4% rdg+1°C) 1°C
±(0.4% rdg+1°F) / 0.1°F
±(0.4% rdg+2°F) / 1°F
±(0.4% rdg+0.6°C) / 0.1°C
±(0.4% rdg+1°C) 1°C
±(0.4% rdg+1°F) / 0.1°F
±(0.4% rdg+2°F) / 1°F
±(0.4% rdg+0.6°C) / 0.1°C
±(0.4% rdg+1°C) 1°C
±(0.4% rdg+1°F) / 0.1°F
±(0.4% rdg+2°F) / 1°F
Process
Relays and
Timers
Pneumatics:
Air Prep
Pneumatics:
Directional Control
Valves
-10°C to 60°C (14°F to 140°F)
Pneumatics:
Cylinders
-19.9° / +99.9°
Pneumatics:
Tubing
Technique
Sigma-Delta
Resolution
±15 bits
Pneumatics:
Air Fittings
20 times per second
Appendix
Book 2
Temperature coefficient
100 ppm/°C
Terms and
Conditions
Warm-up time
10 minutes
Temperature
23°C±5°C
Conversion rate
Accuracy
Conditions
Sensors:
Photoelectric
Sensors:
Encoders
Range
RTD
Conversion
Sensors:
Proximity
10V @ 60mA
Sensor
Excitation
Temperature
Motor Controls
[email protected], 10V @ 60mA
Sensor
Excitation
Load Cell
Motors
www.automationdirect.com/process-controllers
Book 2 (14.3)
Process Control
ePS-31
Prices as of April 13, 2016. Check Web site for most current prices.
Digital Panel Meters - DPM3
Series 1/8 DIN
Technical Specifications Continued
Display
Range
-19999 / +39999, 5 LED digits 14mm (Programmable color Red, Green, Amber)
LEDs
8, functions and outputs status
Display refresh rate
Process / Load cell
20 times per second
Pt100
20 times per second
TC
10 times per second
Display / Input overrange
indication
Relays
"-oUEr” , “oUEr”
-2R: (2) Form C SPDT
-4R: (4) Form A SPST Normally Open with shared common
Nominal contact rating............................................8A at 250VAC / 24VDC
Maximum switching current (resistive load)..........8A
Maximum switching power.....................................2000VA / 192W
Maximum switching voltage...................................400VAC / 125VDC
Contact resistance...................................................≤100mΩ at 6VDC at 1A
Operate time............................................................≤10ms
Nominal contact rating..............................................5A at 250VAC / 30 VDC
Maximum switching current (resistive load)............5A
Maximum switching power.......................................1250VA / 150W
Maximum switching voltage.....................................250VAC / 30VDC
Contact resistance.....................................................≤100mΩ at 6VDC at 1A
Operate time..............................................................≤10ms
Type
Analog Output
-A & -A2R Only
4-20 mA Sourcing
Maximum load
≤500Ω
Resolution
13 bits
Accuracy
0.1%FS ±1 bit
Response time
10ms
Thermal drift
Power Supply and -H High Voltage:
-L Low Voltage:
Fuses
Power
Consumption
0.5µA / ºC
85-265 VAC 50/60 Hz (100-300 VDC), (recommended fusing 0.5A/250V, 5mm x 20mm glass miniature or DIN 41661 equivalent)
22-53 VAC 50/60 Hz (10.5 - 70 VDC), (recommended fusing 2A/250V, 5mm x 20mm glass miniature or DIN 41661 equivalent)
5W without options, 8W max.
Cutoff frequency
Filter
4Hz to 0.05Hz
Slope
Environmental
Conditions
-20dB/Dec.
Operating temperature
-10ºC to +60ºC (14ºF to 140ºF)
Storage temperature
-25ºC to +85ºC (-13ºF to 185ºF)
Relative humidity
(non-condensing)
<95% @ 40ºC (104ºF)
Maximum altitude
2000m
Frontal protection degree
IP65
Environmental Air
No corrosive gases permitted
Agency Approvals
CE
Book 2 (14.3)
ePS-32
Process Control
1-800-633-0405
Prices as of April 13, 2016. Check Web site for most current prices.
Digital Panel Meters - DPM3
Series 1/8 DIN
Company
Information
Drives
Soft Starters
Wiring
Motors
CN5
CN4
4
1
5
2
6
3
2
CN1
1
CN2
2
1
Line
1 VDC
2
Neutral
2 VDC
CN3
Polarity insensitive for
DC power
12345678 1234
1
2
3
4
Note: For additional wiring information download complete
manual from www.AutomationDirect.com
Input Signal / Excitation
Process Temperature Load Cell
AC Supply DC Supply
1
Power
Transmission
CN2
CN1
CN6
CN3
Common
Tare
Tare reset
Hold
1
-EXC24V
---
-EXC10
2
+EXC24V
---
---
3
---
---
+EXC10
4
---
Pt100 A
---
5
+mA
---
---
6
+V
---
---
7
---
8
Pt100 B
+TC
+mV
-V / -mA (COM) Pt100 B
-TC
-mV (COM)
Motion: Servos
and Steppers
Motor Controls
Sensors:
Proximity
Sensors:
Photoelectric
Sensors:
Encoders
Sensors:
Limit Switches
2 SPDT Relays (-2R)
Terminals
Connector
CN1
CN2
CN3
CN4 & CN5
CN6
Wire cross section
0.08 to 2.5mm²
(28 to 12 AWG)
0.08 to 0.5mm²
(28 to 20 AWG)
0.08 to 0.5mm²
(28 to 20 AWG)
0.08 to 2.5mm²
(28 to 12 AWG)
0.08 to 2.5mm²
(28 to 12 AWG)
Strip length
8 to 9mm
5 to 6mm
5 to 6mm
8 to 9mm
8 to 9mm
Manufacturer
Wago 231202/026-000
Wago 733-108
Wago 733-104
Wago 231303/026-000
Wago 231302/026-000
Cage clamp
connection
Insertion tool or
screwdriver with
0.5 mm x 3.0 mm
blade
Insertion tool or
screwdriver with
0.3 mm x 1.8 mm
blade
Insertion tool or
screwdriver with
0.3 mm x 1.8 mm
blade
Insertion tool or
screwdriver with
0.5 mm x 3.0 mm
blade
Insertion tool or
screwdriver with
0.5 mm x 3.0 mm
blade
CN2 and CN3 Terminals
Insertion Tool (included with meter)
Insert wires into the proper terminal
while using the insertion tool to open
the clip inside the connector. Release
the insertion tool to fix wire to the
terminal.
4
5
6
CN4 (Relay 2)
NO2
CM2
NC2
1
2
3
CN5 (Relay 1)
NO1
CM1
NC1
4 SPST Relays (-4R)
4
5
6
CN4
NO4
Unused
CM (All)
1
2
3
CN5
NO1
NO2
NO3
NO: Normally open, CM: Common,
NC: Normally closed
CN6
1
2
CN1, CN4, CN5
and CN6 Terminals
Analog Output
(-) 4-20mA
(+) 4-20mA
Sensors:
Current
Sensors:
Pressure
Sensors:
Temperature
Sensors:
Level
Sensors:
Flow
Pushbuttons
and Lights
Stacklights
Signal
Devices
Process
Relays and
Timers
Insertion Tool (included with meter)
Pneumatics:
Air Prep
Insert wires into the proper terminal
while using the insertion tool to open
the clip inside the connector. Release
the insertion tool to fix wire to the
terminal.
Pneumatics:
Directional Control
Valves
Pneumatics:
Cylinders
Pneumatics:
Tubing
Pneumatics:
Air Fittings
Appendix
Book 2
Terms and
Conditions
www.automationdirect.com/process-controllers
Book 2 (14.3)
Process Control
ePS-33
Prices as of April 13, 2016. Check Web site for most current prices.
Digital Panel Meters - DPM3
Series 1/8 DIN
Programming Panel
13
1
2
3
4
TARE
1
MAX
2
MIN
3
11
10
4
PROG
MAX/MIN
MICRA
5
12
DATA
ENTER
7
6
9
8
Programming Panel
#
Description
Run Mode
Programming Mode
1
TARE
Indicates tare in the memory
---
2
MAX
Indicates peak displayed
---
3
MIN
Indicates valley displayed
4
PROG
5
DISPLAY
Displays the input variable
Displays programming parameters
6
UP/TARE KEY
Takes on the display value as tare
Increments the value of the flashing digit
7
SHIFT/MAX/MIN KEY
ENTER KEY
Recalls Max/Min values
Enters in PROG mode. Displays
data
Moves to the right
8
---
--Indicates programming mode
Accepts data. Advances program
9
Free space for units label
10
LED Output 4
Activation output 4
Programming output 4
---
11
LED Output 3
Activation output 3
Programming output 3
12
LED Output 2
Activaton output 2
Programming output 2
13
LED Output 1
Activation output 1
Programming output 1
Dimensions
mm [inches]
Dimensions
Panel Cutout
Case Material
Installation
See our website www.AutomationDirect.com for complete Engineering drawings.
96 x 48 x 83.1 mm (1/8 DIN)
92 x 45mm (Max. panel thickness 10mm)
Polycarbonate UL 94 V-0
For additional information and configuration details download the complete instructions from www.AutomationDirect.com
Book 2 (14.3)
ePS-34
Process Control
1-800-633-0405
Other products you might want to consider
Prices as of April 13, 2016. Check Web site for most current prices.
Company
Information
Process
Sensing
from top to bottom
PRESSURE
LEVEL
ProSense pressure switches and sensors monitor hydraulic,
pneumatic and other process applications reliably and
accurately. A wide selection of models are available:
Flowline non-contact ultrasonic liquid level sensors
use proven technology that won’t fail because of
dirty, sticky or scaling liquids.
• Mechanical or electronic pressure
switches for low-cost indication
and switching
Starting at:
$69.00 u.s.
• Gauge and vacuum pressure
transmitters with ceramic or
stainless steel sensing elements
• Digital pressure
switches/transmitters
with integral LCD display
Drives
Soft Starters
Motors
Power
Transmission
Starting at:
$260.00 u.s.Motor Controls
Sensors:
Proximity
• Continuous level measurement,
switching and level control
Sensors:
Photoelectric
• Automatic temperature compensation
for accurate measurement
Sensors:
Encoders
• Output options include current, voltage,
frequency and relay
Sensors:
Limit Switches
• Pushbutton configured models, or
PC configured models using free software
• Air differential sensors
also available
Motion: Servos
and Steppers
Sensors:
Current
Sensors:
Pressure
Starting at:
$9.50 u.s.
Sensors:
Temperature
• ProSense float level switches provide a
low-cost general purpose solution for single point
monitoring of liquid level in a variety of applications.
Sensors:
Level
Sensors:
Flow
Starting at:
TEMPERATURE
ProSense family of temperature
sensing components includes:
Starting at:
$15.25 u.s.
Pushbuttons
and Lights
$299.00 u.s.
Stacklights
• NEW! ProSense SLT series submersible level sensors provide
continuous liquid level measurement using the hydrostatic
pressure exerted by the liquid above the sensor
Signal
Devices
• 4-20 mA output signal compatible with PLCs, panel meters,
data loggers, and other electronic equipment
Process
• Intrinsically safe with a +/-0.25% accuracy standard
Relays and
Timers
FLOW
Pneumatics:
Air Prep
The ProSense FSD Series flow switches monitor
liquid media and provide reliable flow detection
for industrial applications.
Starting at:
Pneumatics:
Directional Control
$125.00 u.s.Valves
Pneumatics:
Cylinders
• Ranges available up 26.4 GPM
• Fast 10ms response time
• Easy-to-turn dial to choose setpoint
Pneumatics:
Tubing
• Thermocouple and RTD probes and sensors
• Integrated check valve prevents back flow in
horizontal or vertical mounting
Pneumatics:
Air Fittings
• Transmitters with integral sensors, or
thermocouple or RTD input
• LED output status indicator
• Thermowells and fittings
• Thermocouple and RTD extension wire
Appendix
Book 2
• IP65 / IP67
Research, price, and buy at
www.automationdirect.com/process-controllers
www.automationdirect.com/process-controllers
Book 2 (14.3)
Process Control
ePS-35
Terms and
Conditions
Prices as of April 13, 2016. Check Web site for most current prices.
FC Series Signal Conditioners
FC-33
FC-11
DC Selectable Signal Conditioner with
3-way isolation
4-20 mA Isolated Signal Conditioner
Field configurable input and output ranges of 0-5V, 0-10 V,
0-20 mA and 4-20 mA with 1500 VDC isolation between
input and output, and 1500 VDC isolation from 24 volt power
and input/output. LED indicates normal operation and is used
in conjunction with the calibration pushbutton for the internal
calibration process.
• 3-way 1500 V isolation
• Push button calibration
FC-T1
Thermocouple/mV Isolated Signal
Conditioner
Field configurable input for type J, K, E, T, R, S, B, N and C
thermocouples or ±156.25 mV inputs with 1500 VDC isolation
between input and the 4-20 mA output. Cold junction compensation and burnout detection. Alarm/run LED.
• 1500 V isolation
• Cold junction compensation (CJC)
• Internal diagnostics (burnout detection or calibration errors)
FC-35B
Unipolar Voltage or Current to Bipolar
Voltage Signal Conditioner
Field configurable input and output, unipolar input ranges of
0-5V, 0-10 V, 0-20 mA or 4-20 mA, and bipolar output ranges of
±100 mV, ±50 mV, ±5V, ±10V, ±15V. Field calibrated with
offset and span adjustments.
FC-3RLY2
Analog Input, 2-Relay, Limit Alarm
Field configurable analog to relay limit alarm powered by 24VAC/
VDC and Input signal ranges of 0-15V, 0-30V or 0-20mA. Trip/
Release Point programmed via DIP switches. LED’s indicate
operating status.
FC-ISO-D
Encoder Signal Conditioner and Optical
Isolator - Differential Line Driver Output
Ideal for use with single-ended (open collector, NPN, pull-up,
push-pull, totem pole) or differential line driver encoders. Three
complementary inputs (A, B, Z, A-not, B-not, Z-not) are rated
for 4.5-7.5 and 12-26 VDC and frequency response up to
1 MHz.
Optical isolation separates the input signals from three differential
line driver outputs (A, B, Z, A-not, B-not, Z-not) rated for 5VDC.
Loop powered 4-20 mA input/output signal with 1500 VDC
isolation between input and output.
• 1500 V isolation
• Loop powered
FC-R1
RTD Input Signal Conditioner
Loop powered, non-isolated, 3-wire unit converts an RTD input
to a linear 4-20 mA signal. User selectable CU10, PT100 or
PT1000 input.
FC-P3
Potentiometer Input, Analog Output
Signal Conditioner
Field configurable input and output, input ranges of 3-wire
potentiometer 0 to 100 ohms through 0 to 100 kilohms, and
output ranges of 0-5V, 0-10 V, 0-20 mA or 4-20 mA. Field
calibrated to 10% of potentiometer full range.
FC-B34
Bipolar Voltage to Unipolar Voltage or
Current Signal Conditioner
Field configurable input and output, bipolar input ranges of
±100 mV, ±50 mV, ±5V, ±10V, ±15V, and unipolar output
ranges of 0-5V, 0-10 V, 0-20 mA or 4-20 mA. Field calibrated
with offset and span adjustments.
FC-3RLY4
Analog Input, 4-Relay, Limit Alarm
Field configurable analog to relay limit alarm powered by 24VAC/
VDC and Input signal ranges of 0-15V, 0-30V or 0-20mA. Trip/
Release Point programmed via DIP switches. LED’s indicate
operating status.
FC-ISO-C
Encoder Signal Conditioner and Optical
Isolator - Open Collector Output
Ideal for use with single-ended (open collector, NPN, pull-up,
push-pull, totem pole) or differential line driver encoders. Three
complementary inputs (A, B, Z, A-not, B-not, Z-not) are rated
for 4.5-7.5 and 12-26 VDC and frequency response up to
1 MHz.
Optical isolation separates the input signals from three
complementary open collector outputs (A, B, Z, A-not, B-not,
Z-not) rated for 5-36 VDC that can be used in single-ended
configurations.
Book 2 (14.3)
ePS-36
Process Control
1-800-633-0405
Prices as of April 13, 2016. Check Web site for most current prices.
FC-33
DC Selectable Signal Conditioner
Company
Information
Drives
$120.00
Specifications
UL file E200031
Overview
Soft Starters
Input Ranges
0-5 V, 0-10 V, 0-20 mA, 4-20 mA
Motors
Input Impedance
250 q, ±0.1% current input
200 Kq / 400 Kh Voltage input
Power
Transmission
Output Ranges
0-5 V, 0-10 V, 0-20 mA, 4-20 mA
Load Impedance
2 Kq minimum, voltage output
0 q minimum, current output
Maximum Load / Current
550 q @ 24 VDC (sink/source)
Sample Duration Time
10 mS
Filter Characteristic
-3 dB @ 3 Hz, -6 dB/octave
Linearity Error
0.05% FSO maximum
Stability
0.05% FSO maximum
Sensors:
Proximity
Sensors:
Encoders
Input Power
24 VDC, ±10% @ 50 mA
Recommended Fuse
0.032 mA, Series 217, current inputs
Noise Immunity
Motor Controls
Sensors:
Photoelectric
Accuracy vs. Temperature 0.005%/ °C, (50ppm/°C)
The FC-33 is a DIN-rail or side-mount, selectable input/output
signal conditioner with 1500 VDC isolation between input and
Isolation
output, and 1500 VDC isolation between 24-volt power and input/
output. The field configurable input/output types allow a wide
ranging capability for 0-5V, 0-10V, 0-20 mA and 4-20 mA signals. Maximum Inaccuracy of
The FC-33 has built-in self-calibration, but also has OFFSET (zero) Output
and SPAN (full scale) adjustments of the output signal. The OFFSET Output Current
has an adjustment range of 0 to 25% of full scale input and the
SPAN has an adjustment of 80% to 102%.
Approx. Field Cal. Range
Level LED: The LED is a powerful tool when setting up the signal
conditioner. During normal operation the LED will blink at a proportional rate to the selected input signal level. When performing field Operating Temperature
calibration the LED is used for indication of the internal calibration Storage Temperature
process.
Relative Humidity
CAL-Pushbutton: This pushbutton, along with various switch
settings, allows you to calibrate the OFFSET and/or SPAN for your Vibration
Shock
application or to restore factory default calibration.
Motion: Servos
and Steppers
Sensors:
Limit Switches
Sensors:
Current
1500 VDC input - output*
1500 VDC power - input*
1500 VDC power - output*
*applied for 1 second
Sensors:
Pressure
0.05% @ 25°C, FSO maximum
0.25% @ 0-60°C, FSO maximum
21 mA maximum (for mA output)
0 - 25%
(0 - 1.5 V / 5 V mode)
80% - 102%
(4 - 5.1 V / 5 V mode)
Sensors:
Temperature
Sensors:
Level
Sensors:
Flow
0-60°C (32 to 140°F)
Pushbuttons
and Lights
-20 to 70°C (-4 to 158°F)
Stacklights
5 to 90% (non-condensing)
ML STD 810C 514.2
ML STD 810C 516.2
Signal
Devices
Process
NEMA ICS3-304
Relays and
Timers
Application
Pneumatics:
Air Prep
The FC-33, field configurable isolated input/output signal
conditioner, is useful in eliminating ground loops and interfacing sensors to PLC analog input modules. The FC-33 has
3-way isolation; this feature solves many types of configuration problems. For example, the signal conditioner can be
configured for a sinking input and a sourcing output. It also
allows signal translation from current input to voltage output
or voltage input to current output.
Pneumatics:
Directional Control
Valves
Pneumatics:
Cylinders
Pneumatics:
Tubing
Pneumatics:
Air Fittings
This feature would be useful in a system design with a limited
type and number of channels – for example: eight channels of
0-10 VDC, seven of which are used, and one 4-20 mA input
transmitter.
Appendix
Book 2
Terms and
Conditions
www.automationdirect.com/signal-conditioners
Book 2 (14.3)
Process Control
ePS-37
Prices as of April 13, 2016. Check Web site for most current prices.
FC-11 4-20mA Isolated Signal Conditioner
$90.00
Specifications
Input Ranges
Extended Input range1
Input Burden Voltage2
4-20 ma
3.5 mA to 20.6 mA, ± 1%
6.8 VDC
Maximum Input Current
34 mA @ 9.7 VDC
Output Burden Voltage
Output Range
Extended Output Range1
Maximum Load Impedance
8.5 VDC minimum
4-20 mA
3.5 mA to 20.6 mA, ± 1%
Maximum Output Current
23 mA @ 29 VDC
Sample Duration Time
18 mS maximum
3
650 q @ 24 VDC, 1000 q 29 VDC
Linearity Error
0.1% FSO maximum
Max Inaccuracy of Output
0.05% @ 25°C, FSO maximum,
0.3% @ 0-60°C, FSO maximum
Filter Characteristics
-3 dB @ 200 Hz, -6 dB / octave
The FC-11 is a DIN-rail or side-mount, 4-20 mA Input/Output
loop powered signal conditioner with 1500 VDC isolation
between input and output.
Stability
0.1% FSO maximum
Accuracy vs. Temperature
± 0.0065% / °C (65ppm / °C)
1500 VDC Input - Output
The FC-11 has a user-selectable factory calibration. The output
can also be calibrated with OFFSET (zero) and SPAN (full scale)
adjustments. The OFFSET has an adjustment range of 0 to 25%
of full scale input and the SPAN has an adjustment of 80% to
102%.
Isolation
Operating Temperature
0 to 60°C (32 to 140°F)
Storage Temperature
-20 to 70°C (-4 to 158°F)
Relative Humidity
5 to 90% (non-condensing)
Vibration
ML STD 810C 514.2
Shock
ML STD 810C 516.2
Noise Immunity
NEMA ICS3-304
UL file E200031
Overview
Application
The FC-11 isolated input/output signal conditioner is useful in
eliminating ground loops and sinking/sourcing issues when interfacing to PLC analog input modules. The FC-11 design feature
solves many types of configuration problems. For example, the
signal conditioner can solve the problem of connecting a sinking
input transmitter to a sinking analog input module.
NOTES:
1. When adjusting SPAN and OFFSET potentiometer
2. Voltage required to power internal circuitry
3. Formula, [(output load) x 20 mA] + 8.5 V,.i.e.: 13.5 VDC @ 250 q
4. Internal analog converter resolution is 12-bit
Book 2 (14.3)
ePS-38
Process Control
1-800-633-0405
Prices as of April 13, 2016. Check Web site for most current prices.
FC-T1 Thermocouple/mV Input Isolated
Signal Conditioner
$120.00
Input Ranges
UL file E200031
Overview
The FC-T1 is a DIN-rail or side-mount
thermocouple/mV input signal conditioner
with 1500 VAC isolation between input
and output.
The field configurable input allows a wide
ranging capability for a type J, K, E, R, S,
T, B, N and C thermocouple, or 0-156.25
mV and w156.25 mV signals.
The FC-T1 has built-in self-calibration, but
also offers OFFSET (zero) and SPAN (full
scale) potentiometer for adjustment of the
output signal.
The FC-T1 is also equipped with cold
junction compensation (CJC) circuitry to
provide an internal ice-point reference.
The temperature calculation and linearization are based on data provided by
the National Institute of Standards and
Technology (NIST).
ALARM and RUN LED: This LED is bicolor
(red and green). A red LED indicates either
power up, a fault with internal calibration,
or a thermocouple burnout condition,
while a green LED indicates normal operation.
Burnout Function: The output current can
be selected to provide either upscale
(20mA) or downscale (4mA) detection
whenever thermocouple burnout occurs.
°C
°F
Resolution1
J
-190 to 760
-310 to 1400
0.23°C
K
-150 to 1372
-238 to 2502
0.37°C
E
-210 to 1000
-345 to 1832
0.295°C
R
65 to 1768
149 to 3214
0.42°C
S
65 to 1768
149 to 3214
0.42°C
-382 to 752
0.15°C
T
-230 to 400
B
529 to 1820
984 to 3308
0.315°C
N
-70 to 1300
-94 to 2372
0.33°C
C
65 to 2320
149 to 4208
0.55°C
0 to 156.25 mV
0.038 mV
-156.25 mV to +156.25 mV
0.076 mV
Soft Starters
Power
Transmission
Motion: Servos
and Steppers
Motor Controls
Sensors:
Proximity
Sensors:
Photoelectric
Sensors:
Encoders
Sensors:
Limit Switches
Sensors:
Current
Output Range
4 to 20 mA
External Power Supply
15 mA, 22 to 26 VDC
Input Impedance
>5 Mq
Absolute Maximum Rating
Fault protected input ±50 V
Maximum Inaccuracy
±3°C, Temperature Input
±0.1%, Voltage Input
Linearity Error
0.1%
Over Temperature Error
0.1 X 10-5% (10 ppm)/°C
Insulation Resistance
M100 Mr with 500 VDC (Input to output power)
Isolation
1500 VAC @ 1 Sec. (Input to output commons)
Sample Duration Time
120 mS Voltage Input
250 mS Thermocouple Input
Common Mode Rejection
-100 dB @ DC, -90 dB @ 50/60 Hz
Input Filter (FIR)
-3 dB @ 15 Hz, -100 dB @ 50 Hz, -100 dB @ 60 Hz
Broken Thermocouple
Up/Down Scale
Red/Green LED
Over Range
Up Scale
Under Range
Down Scale
Burnout Time
m3 Seconds
Cold Junction Compensation
Automatic
Warm-up Time
30 min. typical ±1°C repeatability
Operating Temperature
0 to 60°C (32 to 140°F)
Storage Temperature
-20 to 70°C (-4 to 158°F)
Relative Humidity
5 to 90% (non-condensing)
Environmental Air
No corrosive gases permitted
Vibration
ML STD 810C 514.2
Shock
ML STD 810C 516.2
Noise Immunity
NEMA ICS3-304
Sensors:
Pressure
Sensors:
Temperature
Sensors:
Level
Sensors:
Flow
Pushbuttons
and Lights
Stacklights
Signal
Devices
Process
Relays and
Timers
Pneumatics:
Air Prep
Pneumatics:
Directional Control
Valves
Pneumatics:
Cylinders
Pneumatics:
Tubing
Pneumatics:
Air Fittings
Appendix
Book 2
Note:
1 Internal analog converter resolution is 12-bit.
www.automationdirect.com/signal-conditioners
Drives
Motors
Specifications
T/C
Company
Information
Terms and
Conditions
Book 2 (14.3)
Process Control
ePS-39
Prices as of April 13, 2016. Check Web site for most current prices.
FC-T1 Thermocouple/mV Input Isolated
Signal Conditioner
Application
The FC-T1, field configurable thermocouple/mV signal
conditioner, is useful in eliminating ground loops and
for interfacing to PLC analog input modules. If your
requirements are only for one channel of temperature,
you can add the signal conditioner to your 4-20 mA input
module. Or, if your requirements are for a single millivolt
signal source, you have the option of adding this input to
your analog module.
Signal Conditioner Dimensions
These dimensions are typical for all of the signal conditioners.
All dimensions are in inches (millimeters).
Book 2 (14.3)
ePS-40
Process Control
1-800-633-0405
Prices as of April 13, 2016. Check Web site for most current prices.
FC-R1 RTD Input Loop Powered Signal
Conditioner
$120.00
Specifications
Input Ranges
UL file E200031
Overview
The FC-R1 is a DIN-rail or side-mount
Resistive Temperature Detector signal
conditioner. It is a non-isolated signal conditioner which converts a 3-wire RTD to a
linearized 4-20 mA current loop signal.
The FC-R1 has a user selectable CU10 (10
Ohm copper), PT100 (100 Ohm platinum)
or PT1000 (1000 Ohm platinum) RTD input,
and also offers OFFSET (zero) and SPAN (full
scale) adjustments of the output signal. The
OFFSET has an adjustment range of 0 to
25% of full scale output and the SPAN has an
adjustment of 80% to 102%.
Company
Information
Drives
Soft Starters
Motors
CU10
-200°C to 260°C
-328°F to 500°F
PT100
-200°C to 850°C
-328°F to 1562°F
PT1000
-200°C to 595°C
-328°F to 1103°F
Power
Transmission
Motion: Servos
and Steppers
RTD Excitation Current
CU10, PT100 500 µA ±50 µA
PT1000 80 µA ±20 µA
Common Mode Range
0 - 3.5 VDC
Output Range
4-20 mA (linearized)
Maximum Inaccuracy
0.35% FSO / CU10
0.2% FSO @ 25°C / PT100 & PT1000
0.26% FS0 @ 60°C / PT100 & PT1000
Maximum Loop Supply
30 VDC
Load Impedance
0 q minimum
Maximum Load/Power Supply
203 q / 12 V, 745 q / 24 V
Linearity Error
0.35% FSO / CU10
0.2% FSO / PT10 & PT1000
Sensors:
Current
Output Slew Rate
1% @ 20 mS
Filter Characteristics
105 dB @ DC, 60 dB @ 10 Hz, 40 dB @ 60Hz
Sensors:
Pressure
Stability
0.05% FSO maximum
Operating Temperature
0 to 60°C (32 to 140°F)
Storage Temperature
-20 to 70°C (-4 to 158°F)
Relative Humidity
5 to 90% (non-condensing)
Environmental Air
No corrosive gases permitted
Vibration
ML STD 810C 514.2
Shock
ML STD 810C 516.2
Noise Immunity
NEMA ICS3-304
Motor Controls
Sensors:
Proximity
Sensors:
Photoelectric
Sensors:
Encoders
Sensors:
Limit Switches
Sensors:
Temperature
Sensors:
Level
Sensors:
Flow
Pushbuttons
and Lights
Stacklights
Signal
Devices
Process
Application
Relays and
Timers
The FC-R1 field configurable input signal conditioner is
useful for interfacing RTD sensors to PLC analog current input
modules. It is recommended that shielded RTDs be used
whenever possible to minimize noise on the input signal.
Pneumatics:
Air Prep
Pneumatics:
Directional Control
Valves
Pneumatics:
Cylinders
Pneumatics:
Tubing
Pneumatics:
Air Fittings
Appendix
Book 2
Terms and
Conditions
www.automationdirect.com/signal-conditioners
Book 2 (14.3)
Process Control
ePS-41
Prices as of April 13, 2016. Check Web site for most current prices.
FC-P3 P
otentiometer Input, Analog Output
Signal Conditioner
$115.00
Specifications (continued)
Output Specifications (continued)
Output Ripple
Output Protection
Inverted Outputs
0.05% of full scale
Outputs short circuit protected
Invert Outputs using DIP Switch 6
Terminal Block Specifications
Field Wiring
Number of Positions
Wire Range
Screw Torque
UL file E157382
General Specifications
±50 PPM of full scale/°C Maximum
Accuracy vs. Temperature
Response Time
Overview
Power Dissipation within Module
The FC-P3 is a resistive input to isolated analog output Thermal Dissipation
signal conditioner. The input resistive range (high end resistivity, low end resistivity) is set through the use of a push- Surrounding Air Temperature
button programming routine.
The FC-P3 is field configurable for 3-wire potentiometer/slide-wire inputs with end-to-end resistance ranges
from 0-100 ohms to 0-100 kilohms. The input adjustment range can be scaled down to a minimum of
10% of the potentiometer being used. Switch selectable, analog output options include 0-20 mA, 4-20 mA,
0-5V, and 0-10 V. The PGM LED provides an indication of
operating status and is used during the field programming
process.
Storage Temperature
Enclosure Rating
Humidity
Environmental Air
Vibration
The MAX and MIN LED’s indicate OVER and
Shock
UNDER range status. The module can be 35 mm
DIN rail or side mounted and is UL listed. Power
for the unit is provided by a customer supplied Isolation
24 VAC or 24 VDC Class 2 power supply.
Insulation Resistance
Specifications
Input Specifications
0 - 100 ohms up to 0-100 kilohms,
3-wire potentiometer/slide-wire
Input Ranges
Programmable Range
Minimum
Excitation
External Power Required
Pushbutton Adjustable to 10% of full range of
applied potentiometer
>100 uA @ 2.5VDC
24 VDC ±10% @ 120 mA or 24 VAC ±10% @
120 mA, Class 2
Output Specifications
Output Ranges
Maximum Output Current
Response Time
Load Impedance
Output Drive
Maximum Inaccuracy
Output Stability and
Repeatability
Removable Screw Terminal Blocks (included)
2 (Dinkle EC350V-02P), 4 (Dinkle EC350V-04P),
4 (Dinkle EC350V-04P)
28-14 AWG solid or stranded conductor;
wire strip length 1/4” (6-7mm)
1.7 inch-pounds (0.19 NM)
Noise Immunity
Weight
Agency Approvals
35 ms, 100 ms for 0-10V range
3W Maximum
9.42 BTU/hr
0 to 60°C (32 to 140°F)
IEC 60068-2-14 (Test Nb, Thermal Shock)
-20 to 70°C (-4 to 158°F)
IEC 60068-2-1 (Test Ab, Cold)
IEC 60068-2-2 (Test Bb, Dry Heat)
IEC 60068-2-14 (Test Na, Thermal Shock)
IP20
5 to 95% (non-condensing)
IEC 60068-2-30 (Test Db, Damp Heat)
No corrosive gases permitted
(EN61131-2 pollution degree 1)
MIL STD 810C 514.2
MIL STD 810C 516.2
1500 VDC Input to Output
1000 VDC Power to Input
1000 VDC Power to Output
applied for 1 second (100% tested)
>10 M ohm @ 500 VDC
NEMA ICS3-304
IEC 61000-4-2 (ESD)
Impulse 1000 V @ 1μS pulse
IEC 6100-4-4 (FTB)
RFI, (145 MHz, 440 MHz 5W @ 15 cm)
IEC 61000-4-3 (RFI)
0.25 lbs
UL508*, File Number: E157382, CE
*In order to comply with UL508, the supplied power must be less than 26 VDC and fused at a
maximum of 3 amps.
0-5 V, 0-10 V, 0-20 mA, 4-20 mA
(DIP Switch Selectable/Invertable)
21 mA (for mA OUT ONLY)
35 ms for mA Out, 100 ms for V Out
2 kilohm minimum, voltage output
550 ohms maximum current output
Voltage: 10 mA maximum
Current: 21 mA maximum
±0.75% @ 0-60°C, FSO maximum
0.05% FSO maximum
Book 2 (14.3)
ePS-42
Process Control
1-800-633-0405
Prices as of April 13, 2016. Check Web site for most current prices.
FC-P3
Application and Dimensions
Company
Information
Drives
Soft Starters
Application
Use the FC-P3 to eliminate the
challenge of getting a variable set by a
machine operator into the PLC. Using
the FC-P3 to convert the resistive signal
from a 10 kilohm potentiometer to a
4-20 mA signal that can be used by a
PLC is simple.
Motors
RUN/CAL LED
Set For
4-20 mA / 2-10 V Output Ranges
Motion: Servos
and Steppers
OVER Range LED
IN
ANALOG
4CH
UNDER Range LED
DIP Switch
Input DIP 1 2 3 4 5 6 7 8
Setup
0 0 0 0 0 0 1 1
12345678
DIP Switches
24V
0V
+24V
20
CH1-CH1+
OUT
(mA)
4-20 mA
CH2--
0
CH1+
CH2+
F2--04AD1
5
10
INPUT
(kΩ )
CH2 -
PLC Analog Input Module
NOTE: Pot must be wired so that the minimum Pot
resistance is between Input Terminals 1 & 2.
Faceplate Label
1
2
3
4
Description
Pot End Terminal
Pot Wiper
Sensors:
Limit Switches
Sensors:
Current
Sensors:
Pressure
Sensors:
Temperature
Wiring Connections
Input Terminal Block
Sensors:
Photoelectric
Sensors:
Encoders
12
4
CH2+
CH1-
Motor Controls
Sensors:
Proximity
10 kilohm Pot
F2--04AD--1
18--26.4VDC
80mA
ANALOG IN
4--20mA
Power
Transmission
Sensors:
Level
External Power Terminal Block
Faceplate Label
24 V
0V
Description
24 VDC or 24 VAC ±10%, Class 2
0V
Pot End Terminal
Shield Connection
Output Terminal Block
Faceplate Label
I+
IV+
V-
Description
Current
Current
Voltage
Voltage
NOTE: Pot must be wired so that the minimum Pot
resistance is between Input Terminals 1 & 2.
Sensors:
Flow
Pushbuttons
and Lights
Stacklights
Signal
Devices
Process
Relays and
Timers
Dimensions
Pneumatics:
Air Prep
inches [mm]
Pneumatics:
Directional Control
Valves
Pneumatics:
Cylinders
Pneumatics:
Tubing
Pneumatics:
Air Fittings
Appendix
Book 2
Terms and
Conditions
www.automationdirect.com/signal-conditioners
Book 2 (14.3)
Process Control
ePS-43
Prices as of April 13, 2016. Check Web site for most current prices.
FC-35BUnipolar Voltage or Current to
Bipolar Voltage Signal Conditioner
$129.00
Specifications
Input Specifications
Input Ranges
Input Impedance
Protection Type, Component
External DC Power Required
User Calibration Range
0-5V, 0-10 V, 0-20 mA, 4-20 mA
(DIP Switch Selectable/Invertable)
410 kilohm voltage input, 250 ohm current input
Polarity Protection Diode
24 VDC ±10%, 40 mA, Class 2
OFFSET (zero): 0-20% (e.g. 0-1.0V / 5V mode)
SPAN (full-scale): 80-102% (e.g. 4.0 - 5.1V / 5V mode)
Output Specifications
±50 mV, ±100 mV, ±5V, ±10 V, ±15 V
Output Ranges
2 kilohm Minimum
Load Impedance
10 ms
Sample Duration Time
0.1% FSO @ 25°C (1.0% 50 mV / 100 mV)
Maximum Inaccuracy
±60 PPM of Full Scale / °C Maximum
Accuracy vs. Temperature
UL file E157382
±50 mV/±100 mV @ 2.5mA max,
±5V, ±10 V, ±15 V @ 7.5mA max
Output Current
Terminal Block Specifications
Field Wiring
Removable Screw Type Terminal Blocks (Included)
2 (Dinkle: EC350V-02P), 3 (Dinkle: EC350V-03P),
6 (Dinkle: EC350V-06P)
28-14 AWG solid or stranded conductor;
wire strip length 1/4” (6-7mm)
1.7 inch-pounds (0.19 Nm)
Number of Positions
Wire Range
Overview
The FC-35B is a 35 mm DIN-rail or side-mount, selectable unipolar input to bipolar output signal conditioner
with isolation between input and output, and isolation
between 24-volt power and input/output. The FC-35B
field configurable isolated signal conditioner is useful in
eliminating ground loops and interfacing sensors to PLC
analog input modules. It translates unipolar voltage inputs
or current inputs to bipolar voltage outputs. The input and
output signal levels are selected via DIP switches. In addition, the outputs can be either a direct conversion of the
inputs or an inversion (a reverse acting operation).
The user also has the option of customizing the input
OFFSET (zero) and SPAN (full scale) adjustments that can
be set to a percentage of the full scale via a pushbutton
on the front panel.
Screw Torque
General Specifications
Surrounding Air Temperature
Storage Temperature
Enclosure Rating
0 to 60°C (32 to 140°F)
IEC 60068-2-14 (Test Nb, Thermal Shock)
-20 to 70°C (-4 to 158°F)
IEC 60068-2-1 (Test Ab, Cold)
IEC 60068-2-2 (Test Bb, Dry Heat)
IEC 60068-2-14 (Test Na, Thermal Shock)
IP20
5 to 95% (non-condensing)
IEC 60068-2-30 (Test Db, Damp Heat)
No corrosive gases permitted
Environmental Air
(EN61131-2 pollution degree 1)
MIL STD 810C 514.2
Vibration
IEC 60068-2-6 (Test Fc)
MIL STD 810C 516.2
Shock
IEC 60068-2-27 (Test Ea)
>10M @ 500VDC
Insulation Resistance
NEMA ICS3-304
IEC 61000-4-2 (ESD)
Impulse 1000 V @ 1μS pulse
Noise Immunity
IEC 61000-4-4 (FTB)
RFI, (145 MHz, 440 MHz 5W @ 15 cm)
IEC 61000-4-3 (RFI)
0.3lbs
Weight
1800 VDC Power to Input
1800 VDC Power to Output
Isolation
1800 VDC Input to Output
applied for 1 second (100% tested)
UL508*, File Number: E157382, CE
Agency Approvals
*In order to comply with UL508, the supplied power must be less than 26 VDC and fused at a
maximum of 3 amps.
Humidity
Book 2 (14.3)
ePS-44
Process Control
1-800-633-0405
Prices as of April 13, 2016. Check Web site for most current prices.
FC-35B
Applications and Dimensions
Company
Information
Drives
Application Example 1
Application Example 2
Use the FC-35B to convert a unipolar output from a PLC
analog card to a bipolar ±10 VDC signal to control a
SureServo’s External Velocity Command.
Use the FC-35B to convert and isolate a unipolar output from
a 4-20 mA sensor or transmitter to a bipolar ±10 VDC signal
for a PLC input.
Soft Starters
Motors
Power
Transmission
4-20 mA
24 V
Motion: Servos
and Steppers
DIP Switch
OUT
ANALOG
2CH
Input DIP 1 2 3 4 5 6 7 8
Setup
0 0 1 0 0 0 1 0
FC-35B
V+
F2--02DA--1
DIP Switches
COM
Sensors:
Proximity
DIAG
18--30VDC
60mA
ANALOG OUT
4--20mA
0V
+24V
10
CAL
OUT
(V)
CH1-CH1+
24V
CH2-NC
±mV
NC
Sensors:
Photoelectric
12
20
INPUT
(mA)
NC
NC
0
-10
4
0V
CH2+
F2--02DA--1
Motor Controls
12345678
I+
4-20mA
Sensors:
Encoders
COM
±5V
±10 V
±10V
Sensors:
Limit Switches
±15V
COM
Sensors:
Current
PLC Analog Output Module
Sensors:
Pressure
Set For
4-20 mA Input
±10 V Output
*CAUTION: Product may be damaged if
multiple outputs are tied together.
+
-
±10 V
Analog
Input
Sensors:
Temperature
SureServoTM
Drive
Sensors:
Level
Wiring Connections
Input Terminal Block
Output Terminal Block
Faceplate
Faceplate
Description
Label
Label
Voltage In
V+
±mV
Current In
I+
COM
Common
COM
±5V
NOTE: V+ and I+ must be jumpered
±10 V
for Current input
±15 V
COM
Description
Switch/LED Labels
External Power
Terminal Block
Faceplate
Label
Description
COM Connection
(used with mV signals)
24 V
24 VDC ±10%
(Class 2)
±5V Output
0V
0V
±50 mV or ±100 mV Output
±10 V Output
Sensors:
Flow
Faceplate
Label
Description
Pushbuttons
and Lights
DIAG
Diagnostic LED
flashing indication
Stacklights
CAL
Push button switch
input to initiate
calibration, etc.
Signal
Devices
±15 V Output
Process
Relays and
Timers
COM Connection
(used with non-mV signals)
Dimensions
Pneumatics:
Air Prep
inches [mm]
Pneumatics:
Directional Control
Valves
Pneumatics:
Cylinders
Pneumatics:
Tubing
Pneumatics:
Air Fittings
Appendix
Book 2
Terms and
Conditions
www.automationdirect.com/signal-conditioners
Book 2 (14.3)
Process Control
ePS-45
Prices as of April 13, 2016. Check Web site for most current prices.
FC-B34 Bipolar Voltage to Unipolar Voltage
or Current Signal Conditioner
$129.00
Specifications
Input Specifications
Input Ranges
Input Impedance
Protection Type, Component
External DC Power Required
User Calibration Range
±15 V, ±10 V, ±5V, ±100 mV, ± 50 mV
(DIP Switch Selectable)
2 M ohm
Polarity Protection Diode
24 VDC ±10%, 50 mA, Class 2
OFFSET (zero): 0-20% (e.g. -4V / ±5V mode)
SPAN (full-scale): 80-102% (e.g. 4.0 - 5.1V / ±5V mode)
Output Specifications
Output Ranges
Load Impedance
Sample Duration Time
UL file E157382
Maximum Inaccuracy
Accuracy vs. Temperature
Output Current
Overview
The FC-B34 is a 35 mm DIN-rail or side-mount, selectable
bipolar input to unipolar output signal conditioner with
isolation between input and output, and isolation between
24-volt power and input/output. The FC-B34 field configurable isolated signal conditioner is useful in eliminating
ground loops and interfacing sensors to PLC analog input
modules. It translates bipolar voltage input to unipolar
voltage output or bipolar voltage input to a current output.
The input and output signal levels are selected via DIP
switches. In addition, the outputs can be either a direct
conversion of the inputs or an inversion (a reverse acting
operation). The user also has the option of customizing
the input OFFSET (zero) and SPAN (full scale) adjustments
that can be set to a percentage of the full scale via a
pushbutton on the front panel.
0-5V, 0-10 V, 0-20 mA, 4-20 mA
(DIP Switch Selectable)
2 kilohm Minimum, Voltage Output
550 ohm Maximum, Current Output
10 ms
0.1% FSO (±15 V, ±10 V, ±5V Inputs),
1.5% FSO ( ±100 mV, ±50 mV Inputs) @ 25°C
+/-60 PPM of Full Scale/ °C Maximum
21 mA max for mA-Out mode/
10 mA max for Volt-out mode
Terminal Block Specifications
Field Wiring
Removable Screw Type Terminal Blocks, (included)
2 (Dinkle: EC350V-02P), 2 (Dinkle: EC350V-02P),
4 (Dinkle: EC350V-04P)
28-14 AWG solid or stranded conductor;
wire strip length 1/4” (6-7mm)
1.7 inch-pounds (0.19 Nm)
Number of Positions
Wire Range
Screw Torque
General Specifications
Surrounding Air Temperature
Storage Temperature
Enclosure Rating
Humidity
0 to 60°C (32 to 140°F)
IEC 60068-2-14 (Test Nb, Thermal Shock)
-20 to 70°C (-4 to 158°F)
IEC 60068-2-1 (Test Ab, Cold)
IEC 60068-2-2 (Test Bb, Dry Heat)
IEC 60068-2-14 (Test Na, Thermal Shock)
IP20
5 to 95% (non-condensing)
IEC 60068-2-30 (Test Db, Damp Heat)
No corrosive gases permitted
(EN61131-2 pollution degree 1)
MIL STD 810C 514.2
Vibration
IEC 60068-2-6 (Test Fc)
MIL STD 810C 516.2
Shock
IEC 60068-2-27 (Test Ea)
>10 M Ω@ 500 VDC
Insulation Resistance
NEMA ICS3-304
IEC 61000-4-2 (ESD)
Impulse 1000 V @ 1μS pulse
Noise Immunity
IEC 61000-4-4 (FTB)
RFI, (145 MHz, 440 MHz 5W @ 15 cm)
IEC 61000-4-3 (RFI)
0.3lbs
Weight
1800 VDC Power to Input
1800 VDC Power to Output
Isolation
1800 VDC Input to Output
applied for 1 second (100% tested)
UL508*, File Number: E157382, CE
Agency Approvals
*In order to comply with UL508, the supplied power must be less than 26 VDC and fused at a
maximum of 3 amps.
Environmental Air
Book 2 (14.3)
ePS-46
Process Control
1-800-633-0405
Prices as of April 13, 2016. Check Web site for most current prices.
FC-B34
Applications and Dimensions
Drives
Application Example 1
Application Example 2
The FC-B34 can be used to convert a bipolar ±10 VDC
signal to a 4-20 mA signal.
The FC-B34 can be used to convert the bipolar ±10 VDC
from a DCT100-10B-24S current transducer to a 4-20 mA or
0-10 VDC that can be used by a PLC.
IN
ANALOG
4CH
FC-B34
±10 V
10-30VDC
5 mA
Set for
±10 V Input
and
4-20 mA Output
V+
DIAG
CH1-CH1+
CH3 -
Sensors:
Proximity
12345678
CH2+
DIP Switches
24V
CH3+
CH4 -
Motor Controls
Input DIP 1 2 3 4 5 6 7 8
Setup
1 0 0 0 1 1 0 0
CAL
CH2--
Sensors:
Photoelectric
0V
CH4+
ANALOG IN
0-5, 0-10VDC
+/-5, +/-10VDC
+24 V
Set for
±10 V
Output
0V
4-20 mA
Current
Device
20
I+
IV+
Motors
Motion: Servos
and Steppers
DIP Switch
V-
0V
+24V
Soft Starters
Power
Transmission
PLC Analog Output Module
F2--02DA--2
Company
Information
OUT 12
(mA)
Sensors:
Encoders
4
V-
24 V
POWER
SUPPLY
-10
0
+10
Sensors:
Limit Switches
INPUT
(V)
*CAUTION: If current output (I+/I-) and Voltage output (V+/V-)
are both connected to loads and/or the “I+” terminal
to the “V-” terminal, product damage may occur.
Sensors:
Current
Sensors:
Pressure
Sensors:
Temperature
Wiring Connections
Input Terminal Block
Faceplate Description
Label
Signal In +
V+
Signal In V-
Sensors:
Level
Output Terminal Block
Faceplate
Label
I+
IV+
V-
Description
Current
Current
External Power Terminal Block
Faceplate
Label
24 V
0V
Description
24 VDC ±10% (Class 2)
0V
Voltage
Switch/LED Labels
Sensors:
Flow
Faceplate Label
Description
DIAG
Diagnostic LED
flashing indication
Pushbuttons
and Lights
CAL
Pushbutton switch
input to initiate
calibration, etc.
Stacklights
Voltage
Signal
Devices
Process
Relays and
Timers
Dimensions
Pneumatics:
Air Prep
inches [mm]
Pneumatics:
Directional Control
Valves
Pneumatics:
Cylinders
Pneumatics:
Tubing
Pneumatics:
Air Fittings
Appendix
Book 2
Terms and
Conditions
www.automationdirect.com/signal-conditioners
Book 2 (14.3)
Process Control
ePS-47
Prices as of April 13, 2016. Check Web site for most current prices.
FC-3RLY2 Analog Input, 2-Relay,
Limit Alarm Module
$89.00
Specifications
Input Specifications
Number of Inputs and Type
0-15VDC, 0-30VDC, 0-20mA
(DIP Switch Selectable)
100KΩ voltage input / 250 Ohms current input
Input Ranges
UL file E157382
Overview
This is an Analog to Relay Limit Alarm module that is
field configurable for a variety of alarm and control
applications. The FC-3RLY2 can be powered by 24VAC
or 24VDC and accept input signals of 0-15V, 0-30V,
or 0-20mA. Configuration and Trip/Release Point
programming is accomplished with DIP Switches, and a
single PGM-pushbutton. LED’s provide an indication of
operating status and are used during the Trip/Release
Point programming. The module can be 35mm DIN rail
or side mounted.
(1) Single Ended, (1) Common
Input Impedance
24 VAC or 24VDC @ 100mA ±10%
External DC Power Required
-3dB at 100Hz, (-6dB per octave)
Low-pass Filtering
Set/Release Point Voltage
0.05% of full scale Voltage range
(Constant temperature)
Repeatability
Set/Release Point Current
0.1% of full scale Current range
(Constant temperature)
Repeatability
Output Specifications
2 SPDT, Form C, non-latching
Relay Contacts
250VAC @ 5A, 30VDC @ 5A (Resistive Load)
Current Contact Rating
DIP Switch selectable
Relay Operation
Relay Trip Point Setting
Program Mode enabled by pushbutton
Relay Release Point Setting
Range: 1.0% minimum deadband (150mV)
Relay Dead-band = Trip Point 0-15VDC
0-30VDC Range: 1.0% minimum deadband (300mV)
± Release Point
0-20mA Range: 3.0% minimum deadband (600µA)
Terminal Block Specifications
Removable Screw Type Terminal Blocks, (included)
Field Wiring
(2) Two Position (Dinkle: EC350V-02P)
(2) Three Position (Dinkle: EC350V-03P)
Number of Positions
28-14 AWG solid or stranded conductor;
wire strip length 1/4” (6-7mm)
1.7 inch-pounds (0.19 Nm)
Wire Range
Screw Torque
General Specifications
Surrounding Air Temperature
Storage Temperature
Humidity
0 to 60°C (32 to 140°F)
IEC 60068-2-14 (Test Nb, Thermal Shock)
-20 to 70°C (-4 to 158°F)
IEC 60068-2-1 (Test Ab, Cold)
IEC 60068-2-2 (Test Bb, Dry Heat)
IEC 60068-2-14 (Test Na, Thermal Shock)
5 to 95% (non-condensing)
IEC 60068-2-30 (Test Db, Damp Heat)
No corrosive gases permitted
(EN61131-2 pollution degree 1)
MIL STD 810C 514.2
Vibration
IEC 60068-2-6 (Test Fc)
MIL STD 810C 516.2
Shock
IEC 60068-2-27 (Test Ea)
>10 M Ω@ 500 VDC
Insulation Resistance
NEMA ICS3-304
IEC 61000-4-2 (ESD)
Impulse 1000 V @ 1μS pulse
Noise Immunity
IEC 61000-4-4 (FTB)
RFI, (145 MHz, 440 MHz 5W @ 15 cm)
IEC 61000-4-3 (RFI)
0.3lbs
Weight
1800 VDC Power to Input
1800 VDC Power to Output
Isolation
1800 VDC Input to Output
applied for 1 second (100% tested)
UL508*, File Number: E157382, CE
Agency Approvals
*In order to comply with UL508, the supplied power must be less than 26 VDC and fused at a
maximum of 3 amps.
Environmental Air
Book 2 (14.3)
ePS-48
Process Control
1-800-633-0405
Prices as of April 13, 2016. Check Web site for most current prices.
FC-3RLY2
Modes of Operation
Company
Information
Drives
Independent and Simultaneous Relay Control Modes
Soft Starters
Independent Relay Control Mode
Relays A and B are controlled with independent Trip Points and Release Points for each relay. Relays A and B can be independently set to operate in Increasing or Decreasing mode (see next section). This mode can be used to control two loads in
sequence, or monitor for multilevel alarm conditions.
Simultaneous Relay Control Mode
Relays A and B operate simultaneously, both controlled by Trip Point A and Release Point A settings. Both relays operate in
Increasing or Decreasing mode (see next section).
This mode can be used where it is desired to have both relays controlled by common Trip and Release points such as using one
relay for local alarm indication with a horn or strobe and the other relay for remote alarm monitoring by a PLC.
Relay Trip/Release Point Control Modes
Normal (Non-failsafe)
Motors
Power
Transmission
Motion: Servos
and Steppers
Motor Controls
Sensors:
Proximity
Sensors:
Photoelectric
Increasing (INC) Mode
The relay will turn ON when the input signal increases to the programmed Trip Point. The relay will remain ON until the input
signal decreases below the Release Point.
In INC mode, the Trip Point must always be greater than the Release Point (TP > RP).
Sensors:
Encoders
Sensors:
Limit Switches
Sensors:
Current
Sensors:
Pressure
Sensors:
Temperature
Sensors:
Level
Sensors:
Flow
Decreasing (DEC) Mode
The relay will turn ON when the input signal decreases below the programmed Trip Point. The relay will remain ON until the
input signal increases above the Release Point.
In DEC mode, the Trip Point must always be less than the Release Point (TP < RP).
Pushbuttons
and Lights
Stacklights
Signal
Devices
Process
Relays and
Timers
Pneumatics:
Air Prep
Pneumatics:
Directional Control
Valves
Failsafe Mode
Increasing (INC) Mode
The relay will turn OFF when the input signal increases to the programmed Trip Point. The relay will remain OFF until the input
signal decreases below the Release Point.
In INC mode, the Trip Point must always be greater than the Release Point (TP > RP).
Pneumatics:
Cylinders
Pneumatics:
Tubing
Pneumatics:
Air Fittings
Appendix
Book 2
Terms and
Conditions
www.automationdirect.com/signal-conditioners
Book 2 (14.3)
Process Control
ePS-49
Prices as of April 13, 2016. Check Web site for most current prices.
FC-3RLY2
Modes of Operation (continued)
Failsafe Mode (continued)
Decreasing (DEC) Mode
The relay will turn OFF when the input signal decreases below the programmed Trip Point. The relay will remain OFF until the
input signal increases above the Release Point.
In DEC mode, the Trip Point must always be less than the Release Point (TP < RP).
Non-Latching and Latching Relay Control Modes
Non-Latching Relay Control Mode
Relays A and B operate automatically at the Trip and Release Point settings.
Latching Relay Control Mode
Relays A and B operate automatically at the Latch Trip Point settings and remain electrically latched until the input signal
reaches the Manual Release Point, at which time the FC-3RLY2 relays can be manually reset by pressing the PGM-button
as shown in the following diagrams. Latching Relay Control Mode is available in both Normal and Failsafe modes.
Book 2 (14.3)
ePS-50
Process Control
1-800-633-0405
Prices as of April 13, 2016. Check Web site for most current prices.
FC-3RLY2
Dimensions
Company
Information
Drives
Wiring Connections
Soft Starters
Motors
Switch/LED Labels
External Power
Terminal Block
Faceplate
Label
Description
24V
24VAC/VDC ±10%
(Class 2)
0V
0V
Intput Terminal Block
Faceplate
Label
Description
V+ / I+
Voltage + /
Current In
COM
Input Common
Faceplate
Label
Description
MODE
Programming
Diagnostic LED
indication
PGM
Pushbutton switch
input to initiate
programming, etc.
Output Terminal Block
Faceplate
Label
C0/NO0/
NC0
C1/NO1/
NC1
Description
Common # /
Normally Open # /
Normally Closed #
Power
Transmission
Motion: Servos
and Steppers
Motor Controls
Sensors:
Proximity
Sensors:
Photoelectric
Sensors:
Encoders
Sensors:
Limit Switches
Sensors:
Current
Sensors:
Pressure
Sensors:
Temperature
Sensors:
Level
Sensors:
Flow
Dimensions
Pushbuttons
and Lights
mm [inches]
Stacklights
Signal
Devices
Process
Relays and
Timers
Pneumatics:
Air Prep
Pneumatics:
Directional Control
Valves
Pneumatics:
Cylinders
Pneumatics:
Tubing
Pneumatics:
Air Fittings
Appendix
Book 2
Terms and
Conditions
www.automationdirect.com/signal-conditioners
Book 2 (14.3)
Process Control
ePS-51
Prices as of April 13, 2016. Check Web site for most current prices.
FC-3RLY4 Analog Input, 4-Relay,
Limit Alarm Module
$95.00
Specifications
Input Specifications
Number of Inputs and Type
(1) Single Ended, (1) Common
0-15VDC, 0-30VDC, 0-20mA
(DIP Switch Selectable)
100KΩ voltage input / 250 Ohms current input
Input Ranges
Input Impedance
24 VAC or 24VDC @ 100mA ±10%
External DC Power Required
-3dB at 100Hz, (-6dB per octave)
Low-pass Filtering
Set/Release Point Voltage
0.05% of full scale Voltage range
(Constant temperature)
Repeatability
Set/Release Point Current
0.1% of full scale Current range
(Constant temperature)
Repeatability
Output Specifications
4 SPDT, Form A, non-latching
Relay Contacts
UL file E157382
Overview
This an Analog to Relay Limit Alarm module that
is field configurable for a variety of alarm and
control applications. The FC-3RLY4 can be powered
by 24VAC or 24VDC and accept input signals of
0-15V, 0-30V, or 0-20mA. Configuration and Trip/
Release Point programming is accomplished with
DIP switches, and a single PGM-pushbutton. LED’s
provide an indication of operating status and are
used during the Trip/Release Point programming.
The module can be 35mm DIN rail or side mounted.
250VAC @ 5A, 30VDC @ 5A (Resistive Load)
380VAC Max.,30VDC Max.
DIP Switch selectable
Current Contact Rating
Relay Operation
Relay Trip Point Setting
Program Mode enabled by pushbutton
Relay Release Point Setting
Range: 1.0% minimum deadband (150mV)
Relay Dead-band = Trip Point 0-15VDC
0-30VDC Range: 1.0% minimum deadband (300mV)
± Release Point
0-20mA Range: 3.0% minimum deadband (600µA)
Terminal Block Specifications
Removable Screw Type Terminal Blocks, (included)
Field Wiring
(6) Two Position (Dinkle: EC350V-02P)
Number of Positions
28-14 AWG solid or stranded conductor;
wire strip length 1/4” (6-7mm)
1.7 inch-pounds (0.19 Nm)
Wire Range
Screw Torque
General Specifications
Surrounding Air Temperature
Storage Temperature
Humidity
0 to 60°C (32 to 140°F)
IEC 60068-2-14 (Test Nb, Thermal Shock)
-20 to 70°C (-4 to 158°F)
IEC 60068-2-1 (Test Ab, Cold)
IEC 60068-2-2 (Test Bb, Dry Heat)
IEC 60068-2-14 (Test Na, Thermal Shock)
5 to 95% (non-condensing)
IEC 60068-2-30 (Test Db, Damp Heat)
No corrosive gases permitted
(EN61131-2 pollution degree 1)
MIL STD 810C 514.2
Vibration
IEC 60068-2-6 (Test Fc)
MIL STD 810C 516.2
Shock
IEC 60068-2-27 (Test Ea)
>10 M Ω@ 500 VDC
Insulation Resistance
NEMA ICS3-304
IEC 61000-4-2 (ESD)
Impulse 1000 V @ 1μS pulse
Noise Immunity
IEC 61000-4-4 (FTB)
RFI, (145 MHz, 440 MHz 5W @ 15 cm)
IEC 61000-4-3 (RFI)
0.3lbs
Weight
1800 VDC Power to Input
1800 VDC Power to Output
Isolation
1800 VDC Input to Output
applied for 1 second (100% tested)
UL508*, File Number: E157382, CE
Agency Approvals
*In order to comply with UL508, the supplied power must be less than 26 VDC and fused at a
maximum of 3 amps.
Environmental Air
Book 2 (14.3)
ePS-52
Process Control
1-800-633-0405
Prices as of April 13, 2016. Check Web site for most current prices.
FC-3RLY4
Modes of Operation
Company
Information
Drives
Independent and Simultaneous Relay Control Modes
Soft Starters
Independent Relay Control Mode
Relays A, B, C and D are controlled with independent Trip Points and Release Points for each relay. All relays can be
independently set to operate in Increasing or Decreasing mode (see next section). This mode can be used to control
multiple loads in sequence, or monitor for multilevel alarm conditions.
Simultaneous Relay Control Mode
Relays A and B operate simultaneously, both controlled by Trip Point A and Release Point A settings. Both relays operate in
Increasing or Decreasing mode (see next section).
Relays C and D operate simultaneously, both controlled by Trip Point B and Release Point B settings. Both relays operate in
Increasing or Decreasing mode (see next section).
This mode can be used where it is desired to have two relays controlled by common Trip and Release Points such as using one
relay for local alarm indication with a horn or strobe and the other relay for remote alarm monitoring by a PLC.
Motors
Power
Transmission
Motion: Servos
and Steppers
Motor Controls
Sensors:
Proximity
Sensors:
Photoelectric
Sensors:
Encoders
Relay Trip Point / Release Point Control Modes
Increasing (INC) Mode
The relay will turn ON when the input signal increases to the programmed Trip Point. The relay will remain ON until the input
signal decreases below the Release Point. In INC mode, the Trip Point must always be greater than the Release Point (TP > RP).
Sensors:
Limit Switches
Sensors:
Current
Sensors:
Pressure
Sensors:
Temperature
Sensors:
Level
Sensors:
Flow
Decreasing (DEC) Mode
The relay will turn on when the input signal decreases below the programmed trip point. The relay will remain on until the input
signal increases above the release point.
In DEC mode, the Trip Point must always be less than the release point (TP < RP).
Pushbuttons
and Lights
Stacklights
Signal
Devices
Process
Relays and
Timers
Pneumatics:
Air Prep
Pneumatics:
Directional Control
Valves
Pneumatics:
Cylinders
Pneumatics:
Tubing
Pneumatics:
Air Fittings
Appendix
Book 2
Terms and
Conditions
www.automationdirect.com/signal-conditioners
Book 2 (14.3)
Process Control
ePS-53
Prices as of April 13, 2016. Check Web site for most current prices.
FC-3RLY4
Modes of Operation (continued)
Non-Latching and Latching Relay Control Modes
Non-Latching Relay Control Mode
All relays operate automatically at the Trip and Release Point settings.
Latching Relay Control Mode
All relays operate automatically at the Latch Trip Point settings and remain electrically latched until the input signal reaches
the Manual Release Point, at which time the FC-3RLY4 relays can be manually reset by pressing the PGM-pushbutton as
shown in the following diagrams.
Book 2 (14.3)
ePS-54
Process Control
1-800-633-0405
Prices as of April 13, 2016. Check Web site for most current prices.
FC-3RLY4
Dimensions
Company
Information
Drives
Wiring Connections
Soft Starters
Motors
Power
Terminal Block
Faceplate
Label
Description
24V
24VAC/VDC ±10%
(Class 2)
0V
0V
Intput Terminal Block
Faceplate
Label
Description
V+ / I+
Voltage + /
Current In
COM
Input Common
Switch/LED Labels
Faceplate
Label
Description
MODE
Diagnostic LED
flashing indication
PGM
Pushbutton switch
input to initiate
programming, etc.
Output Terminal Block
Faceplate
Label
C0/NO0
C1/NO1
C2/NO2
C3/NO3
Description
Common # /
Normally Open #
Power
Transmission
Motion: Servos
and Steppers
Motor Controls
Sensors:
Proximity
Sensors:
Photoelectric
Sensors:
Encoders
Sensors:
Limit Switches
Sensors:
Current
Sensors:
Pressure
Sensors:
Temperature
Sensors:
Level
Sensors:
Flow
Pushbuttons
and Lights
Dimensions
Stacklights
mm [inches]
Signal
Devices
Process
Relays and
Timers
Pneumatics:
Air Prep
Pneumatics:
Directional Control
Valves
Pneumatics:
Cylinders
Pneumatics:
Tubing
Pneumatics:
Air Fittings
Appendix
Book 2
Terms and
Conditions
www.automationdirect.com/signal-conditioners
Book 2 (14.3)
Process Control
ePS-55
Prices as of April 13, 2016. Check Web site for most current prices.
FC-ISO-C Encoder Signal Conditioner and
Optical Isolator - Open Collector Output
$89.00
Specifications
Input Specifications
Input Voltage (DIP selectable)
4.5-7.5 VDC
Input Current
12-26 VDC
9mA typical, 18mA maximum
Surge, Suppressor Diode; Over current/temperature,
Microprocessor
Protection Type, Component
Switching Threshold “0” Signal
< 2.2 VDC
< 3.9 VDC
Switching Threshold “1” Signal
> 2.6 VDC
> 4.8 VDC
Output Specifications
Overview
The FC-ISO-C high speed optical isolator module
has the versatility to solve various interface
problems between an incremental encoder
signal and a PLC, servo drive, or other input
device. Ideal for use with single-ended (open
collector, NPN, pull-up, push-pull, totem pole)
or differential line driver encoder signals, the
three complementary inputs (A, B, Z, A-not,
B-not, Z-not) are rated for 4.5-7.5 VDC
and 12-26 VDC and frequency response
up to 1 MHz. Input terminals A, B, and Z
can be internally connected together and
complementary input terminals A-not, B-not,
and Z-not can be internally connected to
common through DIP switches for simplified
wiring.
The FC-ISO-C has three complementary open
collector outputs (A, B, Z, A-not, B-not, Z-not)
rated for 5-36 VDC that can be used in single
ended configurations. The open collector
output terminals can be connected to internal
pull-up resistors through DIP switches for quick
troubleshooting. Optical isolation rated at
1800V separates the input signals from the
outputs. The slim-line plastic housing includes
an integral 35mm DIN rail mounting adapter,
LED indication, and removable screw terminal
blocks for easy installation and wiring. The
FC-ISO-C module is UL508 listed and CE
marked.
Applications:
• P rovide optical isolation between an encoder
signal and PLC, servo drive, or other input device
• Solve electrically noisy signal problems
• Use as a repeater to allow longer cable runs
• C
onvert a differential line driver encoder signal
to an open collector single-ended signal
•C
hange encoder signal voltage to match receiving
electronics input
• I deal for use with encoders, servo drive encoder
signal inputs and outputs, or as a multi-channel,
high speed optically isolated interface for
sensors like photoelectric and proximity switches
Output Circuit
Open collector: 2-wire - floating or pull-up (DIP switch
selectable); Sinking
Output Rating
5-36 VDC
Continuous Output Current
65mA maximum
Overcurrent Trip Level
76mA minimum
Quiescent Current
25µA maximum
Output Voltage Protection
Polarity reversal, surge voltage protection
Output Current Protection
Short circuit/Over Current/Over Current Limiting/Thermal
Shutdown
Timing Specifications
Input to Output Response Time
Output Timing Difference
(Ch. to Ch. Lag)
1.3µs (max w/ 4.7k ohm internal pull-up resistor)
<20ns channel to channel (max)
Rise Time (ton w/ 1k ohm Load)
250ns
Fall Time (toff w/ 1k ohm Load)
38ns
Max Frequency Response
w/ 1k ohm Load
1 MHz
Rise Time (ton w/ 2.2k ohm Load)
512ns
Fall Time (toff w/ 2.2k ohm Load)
56ns
Max Frequency Response
w/ 2.2k ohm Load
Rise Time
(ton w/ 4.7k Internal Pull-Up)
Fall Time
(toff w/ 4.7k Internal Pull-Up)
Max Frequency Response
w/ 4.7k Internal Pull-Up
750 kHz
1.2µs
25ns
200 kHz
Terminal Block Specifications
Number of Positions
2 pole (Dinkle: EC350V-02P), 8 pole (Dinkle: EC350V-08P)
Wire Range
28-16AWG Solid or Stranded Conductor; Wire strip length 9/32”
(6-7mm)
Screw Size (Slotted)
M 2.5 size, 0.4 T x 2.5 W mm (Screwdriver part number DN-SS1)
Screw Torque
1.7 inch-pounds (0.19 Nm)
Book 2 (14.3)
ePS-56
Process Control
1-800-633-0405
Prices as of April 13, 2016. Check Web site for most current prices.
FC-ISO-C Specifications Continued
Company
Information
Drives
Specifications (continued)
Soft Starters
General Specifications
External DC Power Required
Power Dissipation Within Module
Thermal Dissipation
Isolation
Mounting
Motors
7.8-24VDC ± 10% @ 125mA, 3.5W*
10W (maximum power with all outputs at max current and max voltage)
Power
Transmission
34.13 BTU/hr (1W = 3.413 BTU/hr)
1800VAC input-output applied for 1 second
Motion: Servos
and Steppers
35mm DIN Rail or panel mount (with no restrictions)
0 to 60°C (32 to 140°F)
IEC 60068-2-14 (Test Nb, Thermal Shock)
-20 to 70°C (-4 to 158°F)
IEC 60068-2-1 (Test Ab, Cold)
IEC 60068-2-2 (Test Bb, Dry Heat)
IEC 60068-2-14 (Test Na, Thermal Shock)
5 to 95% (non-condensing)
IEC 60068-2-30 (Test Db, Damp Heat)
Operating Temperature
Storage Temperature
Humidity
Environmental Air
Motor Controls
Sensors:
Proximity
Sensors:
Photoelectric
Sensors:
Encoders
No corrosive gases permitted (EN61131-2 pollution degree 1)
MIL STD 810C 514.2
IEC 60068-2-6 (Test Fc)
MIL STD 810C 516.2
IEC 60068-2-27 (Test Ea)
Vibration
Shock
Insulation Resistance
Sensors:
Limit Switches
Unit Front Face
>10M Ω @ 500 VDC
Sensors:
Pressure
NEMA ICS3-304
IEC 61000-4-2 (ESD)
Impulse 1000V @ 1µS pulse
IEC 61000-4-4 (FTB)
RFI, (145MHz, 440MHz 5W @ 15cm)
IEC 61000-4-3 (RFI)
Noise Immunity
Weight
Agency Approvals
Sensors:
Current
Sensors:
Temperature
Sensors:
Level
Sensors:
Flow
0.3 lbs
UL*, cUL (File # E157382), CE
Pushbuttons
and Lights
* in order to comply with UL508 the supplied power must be less than 26VDC and fused at a maximum of 3 amps.
Applications
Stacklights
Convert SureServo line driver Input/Output Terminals (CN1) to a 24VDC open collector single ended signal that
is compatible with a PLC high speed counter interface module.
Signal
Devices
Process
ISOLATION
BARRIER
OK
A
B
CTR/TMR IN 9-30V
DC/Pulse OUT 5-36V
FC-ISO-C
+Ai
-Ai
+Bi
-Bi
+Zi
-Zi
SureServo
V+
0V
Ao
Ao
Bo
Fuse
COM
COM
Pneumatics:
Directional Control
Valves
OUT
Pneumatics:
Cylinders
Pneumatics:
Tubing
OUT
H0-CTRIO
+
Pneumatics:
Air Fittings
Appendix
Book 2
PLC High Speed Counter
Interface Module
Fuse
B Pulse
5-12mA
1A
+
- 24VDC
A Pulse
Pneumatics:
Air Prep
Y1
-
OA
/OA
OB
/OB
OZ
/OZ
Y0
A
B
C
D
M
YC
Y0
Y1
7.5-24VD±C10%
CN1
Relays and
Timers
ERR
Terms and
Conditions
Bo
Zo
Zo
0V
0V
www.automationdirect.com/signal-conditioners
Book 2 (14.3)
Process Control
ePS-57
Prices as of April 13, 2016. Check Web site for most current prices.
FC-ISO-C Applications and Dimensions
Applications Continued
Convert a 5VDC differential line driver encoder signal to a 24VDC open collector singleended signal that is compatible with a PLC high speed counter interface module.
ISOLATION
BARRIER
OK
A
B
CTR/TMR IN 9-30V
DC/Pulse OUT 5-36V
ENCODER
Blue: 0 V
Black: OUT A
Purple: OUT A
White: OUT B
Differential Line
Driver Encoder
Gray: OUT B
Orange: OUT Z
Yellow: OUT Z
Shield: Ground
Y1
5-12mA
1A
OUT
A
B
C
D
M
YC
Y0
Y1
FC-ISO-C
+Ai
-Ai
+Bi
-Bi
+Zi
-Zi
OUT
H0-CTRIO
COM
COM
V+
PLC High Speed Counter
Interface Module
0V
Ao
Ao
Bo
* Use separate power supply to maintain isolation
Y0
Bo
+
-24VDC
Brown: Power source*
ERR
Zo
Zo
0V
0V
Dimensions
inches [mm]
Book 2 (14.3)
ePS-58
Process Control
1-800-633-0405
Prices as of April 13, 2016. Check Web site for most current prices.
FC-ISO-D Encoder Signal Conditioner and
Optical Isolator - Differential Line Driver
Output
$89.00
Input Specifications
4.5-7.5 VDC
12-26 VDC
7.5mA typical, 14mA maximum
Output Short Circuit Protection, Output Current Limiting, Output
Thermal Shutdown, 15kV ESD protection; Differential Driver Chip
Protection Type, Component
Switching Threshold “0” Signal
< 2.2 VDC
< 3.9 VDC
Switching Threshold “1” Signal
> 2.6 VDC
> 438 VDC
Output Specifications
Overview
The FC-ISO-D high speed optical isolator module
has the versatility to solve various interface
problems between an incremental encoder
signal and a PLC, servo drive, or other input
device. Ideal for use with single-ended (open
collector, NPN, pull-up, push-pull, totem pole)
or differential line driver encoder signals, the
three complementary inputs (A, B, Z, A-not,
B-not, Z-not) are rated for 4.5-7.5 VDC
and 12-26 VDC and frequency response
up to 1 MHz. Input terminals A, B, and Z
can be internally connected together and
complementary input terminals A-not, B-not,
and Z-not can be internally connected to
common through DIP switches for simplified
wiring.
The FC-ISO-D has three differential line driver
outputs (A, B, Z, A-not, B-not, Z-not) rated for
5 VDC. Optical isolation rated at 1800V separates the input signals from the outputs. The
slim-line plastic housing includes an integral
35mm DIN rail mounting adapter, LED indication, and removable screw terminal blocks
for easy installation and wiring. The FC-ISO-D
module is UL508 listed and CE marked.
Applications:
Output Circuit
Output
Continuous Output Current
Overcurrent Level
Quiescent Current
Differential line drive; Sourcing
Output Voltage Protection
None (not reverse polarity protected); Voltage less than -9 V or
greater than 14V will damage chip
5 VDC
Limited to 70mA
Motors
Motion: Servos
and Steppers
Motor Controls
Sensors:
Proximity
Sensors:
Photoelectric
Sensors:
Encoders
Sensors:
Limit Switches
Sensors:
Pressure
1.0mA maximum
Voltage Drop at Max Continuous
Current
1.75VDC
Short Circuit, Current Limiting, Thermal Shutdown, 15kV ESD
Protection
Input to Frequency Response
Time
Soft Starters
Sensors:
Current
70mA maximum
Output Current Protection
Drives
Power
Transmission
Specifications
Input Voltage (DIP selectable)
Input Current
Company
Information
Timing Specifications
Sensors:
Temperature
Sensors:
Level
Sensors:
Flow
1.3µs
Pushbuttons
and Lights
Output Timing Difference
(Ch. to Ch. Lag)
<20ns
Stacklights
Output Rise Time (ton)
<15ns
Signal
Devices
Output Fall Time (toff)
<15ns
Process
Max Frequency Response
1 MHz
Relays and
Timers
Terminal Block Specifications
Number of Positions
2 pole (Dinkle: EC350V-02P), 8 pole (Dinkle: EC350V-08P)
Pneumatics:
Air Prep
Wire Range
28-16 AWG Solid or Stranded Conductor; Wire strip length 5/16”
(7-8mm)
Pneumatics:
Directional Control
Valves
Screw Size (Slotted)
M 2.5 size, 0.4 T x 2.5 W mm (Screwdriver part number DN-SS1)
Pneumatics:
Cylinders
Screw Torque
1.7 inch-pounds (0.19 Nm)
Pneumatics:
Tubing
• P rovide optical isolation between an encoder
signal and PLC, servo drive, or other input device
• Solve electrically noisy signal problems
• Use as a repeater to allow longer cable runs
• C
onvert a single ended encoder signal to a
differential line driver signal
•C
onvert a differential line driver encoder signal
to a single-ended signal
•C
hange encoder signal voltage to match
receiving electronics input
• I deal for use with encoders and servo drive
encoder signal inputs and outputs
www.automationdirect.com/signal-conditioners
Pneumatics:
Air Fittings
Appendix
Book 2
Terms and
Conditions
Book 2 (14.3)
Process Control
ePS-59
Prices as of April 13, 2016. Check Web site for most current prices.
FC-ISO-D Specifications Continued
Specifications (continued)
General Specifications
External DC Power Required
Power Dissipation Within Module
Thermal Dissipation
Isolation
Mounting
24VDC ±10% @ 105mA*
9W (all outputs at max current at max voltage)
30.72 BTU/hr (1W = 3.413 BTU/hr)
1800VAC input-output applied for 1 second
35mm DIN Rail or panel mount (with no restrictions)
Operating Temperature
0 to 60°C (32 to 140°F)
IEC 60068-2-14 (Test Nb, Thermal Shock)
Storage Temperature
-20 to 70°C (-4 to 158°F)
IEC 60068-2-1 (Test Ab, Cold)
IEC 60068-2-2 (Test Bb, Dry Heat)
IEC 60068-2-14 (Test Na, Thermal Shock)
5 to 95% (non-condensing)
IEC 60068-2-30 (Test Db, Damp Heat)
Humidity
Environmental Air
No corrosive gases permitted (EN61131-2 pollution degree 1)
MIL STD 810C 514.2
IEC 60068-2-6 (Test Fc)
MIL STD 810C 516.2
IEC 60068-2-27 (Test Ea)
Vibration
Shock
Insulation Resistance
Unit Front Face
>10M Ω @ 500 VDC
NEMA ICS3-304
IEC 61000-4-2 (ESD)
Impulse 1000V @ 1µS pulse
IEC 61000-4-4 (FTB)
RFI, (145MHz, 440MHz 5W @ 15cm)
IEC 61000-4-3 (RFI)
Noise Immunity
Agency Approvals
UL*, cUL (File # E157382), CE
* in order to comply with UL508 the supplied power must be less than 26VDC and fused at a maximum of 3 amps.
Applications
Convert a 24VDC single ended open collector encoder signal to a 5VDC differential line driver signal compatible
with SureServo Input/Output Terminals (CN1).
ISOLATION
BARRIER
24VDC
+
-
FC-ISO-D
Blue: 0 V
+Ai
Brown: Power source*
+Bi
Black: OUT A
White: OUT B
Single Ended Open
Collector Encoder
-Ai
SW7
SW8
-Bi
+Zi
-Zi
COM
Fuse
COM
+
Orange: OUT Z
SW6
Internal
Shield: Ground
-
* Use separate power supply to maintain isolation
V+
24VDC
0V
DIP Switch 1
Input DIP 1 2 3 4 5 6 7 8
Setup
0 0 0 0 0 1 1 1
12345678
DIP Switches
CN1
Ao
Ao
Bo
Bo
Zo
Zo
0V
0V
SIGN
/SIGN
PULSE
/PULSE
VCC
T-REF
GND
PULL HI
SureServo
Book 2 (14.3)
ePS-60
Process Control
1-800-633-0405
Prices as of April 13, 2016. Check Web site for most current prices.
FC-ISO-D Applications and Dimensions
Company
Information
Drives
Soft Starters
Applications Continued
Convert a 24VDC single-ended open-collector encoder signal to a 5VDC differential line driver signal compatible
with the encoder input on a servo drive.
Motor Controls
24VDC
-
Sensors:
Proximity
FC-ISO-D
SW6
Internal
Blue: 0 V
Brown: Power source*
Black: OUT A
Single Ended Open
Collector Encoder
Sensors:
Photoelectric
SW7
SW8
-Ai
+Bi
Sensors:
Encoders
-Bi
+Zi
-Zi
COM
Fuse
COM
Sensors:
Limit Switches
-
Orange: OUT Z
+Ai
+
White: OUT B
Sensors:
Current
Shield: Ground
* Use separate power supply to maintain isolation
DIP Switch 1
Input DIP 1 2 3 4 5 6 7 8
Setup
0 0 0 0 0 1 1 1
12345678
DIP Switches
V+
Power
Transmission
Motion: Servos
and Steppers
ISOLATION
BARRIER
+
Motors
24VDC
0V
Ao
Ao
Bo
Bo
Zo
Zo
0V
0V
Sensors:
Pressure
Servo Drive
Encoder Input
A
Sensors:
Temperature
A/
Sensors:
Level
B
B/
Sensors:
Flow
Z
Z/
Pushbuttons
and Lights
GND
Stacklights
Dimensions
Signal
Devices
inches [mm]
Process
Relays and
Timers
Pneumatics:
Air Prep
Pneumatics:
Directional Control
Valves
Pneumatics:
Cylinders
Pneumatics:
Tubing
Pneumatics:
Air Fittings
Appendix
Book 2
Terms and
Conditions
www.automationdirect.com/signal-conditioners
Book 2 (14.3)
Process Control
ePS-61
Prices as of April 13, 2016. Check Web site for most current prices.
FC Series Accessories
FC-5MM
FC-35MM
Description
Universal terminal block replacements for the FC Series signal conditioners. Each packcage includes enough terminal blocks to
replace all the terminal blocks on any FC Series signal conditioner according to the following table:
FC Series
Model
FC-11
FC-33
FC-R1
FC-T1
FC-ISO-C
FC-ISO-D
FC-B34
FC-35B
FC-P3
FC-3RLY2
FC-3RLY4
FC Series Terminal Blocks
Terminal Block Replacement
Part Number
Package Includes
FC-5MM
(2) 2-pole blocks
(2) 3-pole blocks
(1) 4-pole blocks
FC-35MM
(6) 2-pole blocks
(2) 3-pole blocks
(2) 4-pole blocks
(1) 5-pole blocks
(1) 6-pole blocks
(2) 8-pole blocks
Note: Depending on the model, some terminal blocks in the package may be unused.
Universal Signal Conditioners
Part No.
Description
FC-5MM
Terminal block, replacement, 5mm. Package of 5.
For use with FC Series signal conditioners.
block, replacement, 3.5mm. Package of 14.
FC-35MM Terminal
For use with FC Series signal conditioners.
Weight (Lbs)
Price
0.1
$10.00
0.1
$21.00
Book 2 (14.3)
ePS-62
Process Control
1-800-633-0405
Prices as of April 13, 2016. Check Web site for most current prices.
Universal Signal Conditioners
Company
Information
Drives
Soft Starters
Universal Signal Conditioners Motors
Features
• Flexibility to accept mA, VDC, thermocouple, RTD, linear resistance
or potentiometer signal types
• Selectable input ranges and two point field scalability to
handle hundreds of applications
• Direct and reverse acting mA and VDC analog output signal
The 884116 also includes two programmable SPST relay outputs.
• Universal supply voltage, 21.6 to 253 VAC or 19.2 to 300
VDC, polarity insensitive
• 3-way isolation between input, output, and power
• Auxiliary power supply output for 2-wire transmitters and
3-wire potentiometers
• Easy-to-use detachable LCD programming/display module
884501 (Sold separately and required for programming)
• Transfer configuration settings from one signal conditioner
to another
• LEDs indicate operation and relay status (884116) when display module is not installed
• Integral 35mm DIN rail mounting adapter
• Removable screw terminal blocks are keyed to ensure correct
installation
• UL508 listed, CE marked
• 5 year warranty
The Universal Signal Conditioners from AutomationDirect are
extremely, versatile providing the flexibility to convert, transmit,
scale and isolate signals from a wide variety of process sensors
and controller I/O. With models 884114 and 884116, scalable
input signal types supported include mA, VDC, thermocouple
with internal cold junction compensation, 2-, 3-, 4-wire RTDs,
linear resistance or potentiometer signals. Numerous selectable
input ranges and two point field scalability will handle hundreds
of applications. Outputs include mA, VDC; two individually Part No.
programmable relays on the 884116 are used for alarming and
control functions. The isolated universal supply voltage input
eliminates the need for separate transformers or power supplies.
Isolation is also provided between input and output.
884114
The signal conditioners are easily configured with the 884501
menu-structured LCD programming/display module (a
computer running special calibration software is not required
and there are no confusing DIP switches or jumpers to set).
Automatic scrolling Help text identifies each menu item. The
detachable programming/display module can store and
transfer configuration parameters from one signal conditioner 884116
to another, minimizing set-up time in multiple unit applications.
Programming is available in seven different languages and the
programming/display module can be password protected to
prevent unauthorized changes to the configuration. When not
used for configuration, the programming/display module can
remain on the signal conditioner to display the input signal 884501
value and engineering units, output signal, and relay status
(if equipped). A process simulation function allows manual
manipulation of the input signal to control the output signal for
trouble-shooting and checkout.
Power
Transmission
Motion: Servos
and Steppers
Motor Controls
Sensors:
Proximity
Sensors:
Photoelectric
Sensors:
Encoders
Sensors:
Limit Switches
Sensors:
Current
Sensors:
Pressure
Sensors:
Temperature
Sensors:
Level
Sensors:
Flow
Universal Signal Conditioners
Description
Price
Signal conditioner and isolator, single input
• Accepts milliamps, volts, RTD, thermocouple or potentiometer
• Single analog output supports 16 selectable signal ranges
$185.00
• Plastic slim-line housing
• Detachable 884501 programming/display module (purchased separately) is required for unit configuration; module may remain affixed
for operational display of input and output values
Signal conditioner and isolator, single input
• Accepts milliamps, volts, RTD, thermocouple or potentiometer
• Single analog output supports 16 selectable signal ranges
• Two programmable Form A relay outputs
$199.00
• Plastic slim-line housing
• Detachable 884501 programming/display module (purchased separately) is required for unit configuration; module may remain affixed
for operational display of input and output values
Programming/display module, detachable, use with 884114 and
884116.
www.automationdirect.com/signal-conditioners
$51.00
Pushbuttons
and Lights
Stacklights
Signal
Devices
Process
Relays and
Timers
Pneumatics:
Air Prep
Pneumatics:
Directional Control
Valves
Pneumatics:
Cylinders
Pneumatics:
Tubing
Pneumatics:
Air Fittings
Appendix
Book 2
Terms and
Conditions
Book 2 (14.3)
Process Control
ePS-63
Prices as of April 13, 2016. Check Web site for most current prices.
Universal Signal Conditioners
Universal Signal Conditioners 884114/884116 Specifications (with or without 884501)
General Specifications
Temperature Range
Power
-20°C to + 60°C [-4°F to 140°F]
AC Power
21.6 to 253 VAC, 50/60 Hz
DC Power
19.2 to 300 VDC
Consumption
Fuse
Auxiliary Power Supply Output
Isolation Voltage, Test/Operation
Configuration Interface
Signal/noise Ratio
m 2.5W
Response Time
(0 to 90%, 100 to 10%)
Temperature input
m 1 sec
mA / V input
m 400 ms
Calibration Temperature
Accuracy
Shock
Vibration
EMC Immunity
20 to 28°C (68 to 82.4°F)
Extended EMC Immunity:
NAMUR NE 21, A criterion, burst
Environmental Conditions
400 mA slow blow / 250 VAC (Not user replaceable)
16-25 VDC, 20 mA max (Terminal 43 and 44)
2.3 kVAC/250 VAC
Programming/display module, 884501
Min. 60 dB (0 to 100 kHz)
The greater of the general and basic values (See Accuracy Table 1)
EN61010-1
IEC 60068-2-6, IEC 60068-2-64
m w0.5% of span
m w0.1% of span
Operating and Storage Temperature
-20 to +60°C [-4 to 140°F]
Operating and Storage Humidity
95% relative humidity (non-condensing)
Approvals
CE, UL (#E314521, UL 508),
EMC 2004/108/EC (EN 61326-1)
LVD 2006/95/EC (EN61010-1)
RoHS
Construction
IP 50 enclosure, IP 20 terminals Touch Safe, case body is black high impact plastic. Pollution degree 1.
Connections
Weight
Dimensions
Wire strip length
7.5mm [0.3 in]
Wire gauge
26 - 14 AWG standard wire
Torque
0.5 N-m [4.5 inch-lbs]
884114
145g [5.1 oz], 160 g [5.6 oz]
884116
170g [5.9 oz], 185 g [6.5 oz]
884501
15g [0.5 oz]
109 x 23.5 x 100mm [4.3 x .93 x 3.93 in], 109 x 23.5 x 116mm [4.3 x .93 x 4.6 in] with programming module
Accuracy Table 1
General Values
Input Type
Absolute Accuracy
Temperature Coefficient
All
m w 0.1% of span
m w 0.01% of span/°C [0.01% of span/°F]
Input Type
Basic Accuracy
Temperature Coefficient
mA
m w 4 µA
m w 0.4 µA/°C [w0.22µA/°F]
Volt
m w 20 µV
m w 2 µV/°C [w1.1µV/°F]
Pt100
m w 0.2°C [w0.36°F]
m w 0.01°C/°C [w.01°F/°F]
Linear resistance
m w 0.1 Ω
m w 0.01 Ω/°C [w.0056Ω/°F]
Potentiometer
m w 0.1 Ω
m w 0.01 Ω/°C [w.0056Ω/°F]
TC Type: E, J, K, L, N, T, U
m w 1°C [w1.8°F]
m w 0.05°C/°C [w.05°F/°F]
TC Type: B, R, S, W3, W5, LR
m w 2°C [3.6°F]
m w 0.2°C/°C [w0.2°F/°F]
Basic Values
Book 2 (14.3)
ePS-64
Process Control
1-800-633-0405
Prices as of April 13, 2016. Check Web site for most current prices.
Universal Signal Conditioners
Company
Information
Drives
Soft Starters
Inputs
Motors
Current Input
Programmable Ranges
0 to 20 and 4 to 20 mA DC
Measurement Range
-1 to 25 mA
Input Resistance
Nom. 70 Ω
Sensor Error Detection
4 to 20 loop break, m3.6mA; M21mA
Power
Transmission
Motion: Servos
and Steppers
Motor Controls
Voltage Input
Programmable Ranges
0 to 1, 0.2 to 1, 0 to 5, 1 to 5, 0 to 10, and 2 to 10 VDC
Measurement Range
-20 mV to 12 VDC
Input Resistance
Nom. 10 MΩ
Sensors:
Photoelectric
Thermocouple Type
B, E, J, K, L, N, R, S, T, U, W3, W5, and LR
Sensors:
Encoders
Cold Junction Compensation
Via internally mounted sensor < w 2.0°C [< w 3.6°F]
Sensor Error Detection
Sensor break, >750kOhm/(1.25V)
Sensor Error Current
When detecting 2µA, otherwise 0 µA
Sensors:
Proximity
Thermocouple Inputs
Sensors:
Limit Switches
Sensors:
Current
Type
Min. value
Max. value
Standard
B
+400°C [+752°F]
+1820°C [+3308°F]
IEC 60584-1
E
-100°C [-148°F]
+1000°C [+1832°F]
IEC 60584-1
J
-100°C [-148°F]
+1200°C [+2192°F]
IEC 60584-1
K
-180°C [-292°F]
+1372°C [+2502°F]
IEC 60584-1
L
-200°C [-328°F]
+900°C [+1652°F]
DIN 43710
N
-180°C [-292°F]
+1300°C [+2372°F]
IEC 60584-1
R
-50°C [-58°F]
+1760°C [+3200°F]
IEC 60584-1
S
-50°C [-58°F
+1760°C [+3200°F]
IEC 60584-1
T
-200°C [-328°F]
+400°C [+752°F]
IEC 60584-1
Pushbuttons
and Lights
U
-200°C [-328°F]
+600°C [+1112°F]
DIN 43710
Stacklights
W3
0°C [+32°F]
+2300°C [+4172°F]
ASTM E988-90
W5
0°C [+32°F]
+2300°C [+4172°F]
ASTM E988-90
LR
-200°C [-328°F]
+800°C [+1472°F]
GOST 3044-84
Sensors:
Pressure
Sensors:
Temperature
Sensors:
Level
Sensors:
Flow
Signal
Devices
Process
RTD, Linear Resistance, Potentiometer Inputs
RTD Types
Pt10, Pt20, Pt50, Pt100, Pt200, Pt250, Pt300, Pt400, Pt500, Pt1000, Ni50,
Ni100, Ni120, and Ni1000
Cable Resistance per Wire
RTD, 50 Ω max
Sensor Current
RTD, Nom. 0.2 mA
Sensor Error Detection
Sensor break >15 kOhm
Sensor short <15 Ohm
(N/A for Pt10, Pt20, Pt50)
Relays and
Timers
Pneumatics:
Air Prep
Pneumatics:
Directional Control
Valves
Pneumatics:
Cylinders
Input type
Min. value
Max. value
Standard
Pt100
-200°C [-328°F]
+850°C [+1562°F]
IEC60751
Ni100
-60°C [-76°F]
+250°C [+482°F]
DIN 43760
Linear Resistance
0Ω
10kΩ
−
Potentiometer
10 Ω
100kΩ
−
Pneumatics:
Tubing
Pneumatics:
Air Fittings
Appendix
Book 2
Terms and
Conditions
www.automationdirect.com/signal-conditioners
Book 2 (14.3)
Process Control
ePS-65
Prices as of April 13, 2016. Check Web site for most current prices.
Universal Signal Conditioners
Outputs
Analog Output - Current
Signal Range
0 to 20 mA
Programmable Signal Range
0 to 20, 4 to 20, 20 to 0, and 20 to 4 mA
Load Resistance
800 Ω max, 20mA, 16 VDC
Load Stability
0.01% of span, 100 Ω load
Output state on sensor error detection
0 / 3.5 mA / 23 mA / none selectable
For 4 to 20 and 20 to 4 mA signals: 3.8 to 20.5 mA
Output Limitation
For 0 to 20 and 20 to 0 mA signals: 0 to 20.5 mA
Current Limit
m28 mA
Analog Output - Voltage
Signal Range (Span)
0 to 10 VDC
Programmable Signal Ranges
0 to 1, 0.2 to 1, 0 to 10, 0 to 5, 1 to 5, 2 to 10, 1 to 0, 1 to 0.2, 5 to 0, 5 to 1, 10 to
0, and 10 to 2 V
Load
500k Ω min
Relay outputs (884116 only)
Relay Functions
Setpoint, Window, Sensor Error, Power and Off
Hysteresis
0.1 to 25% (1 to 2999 display counts)
On and Off Delay
0 to 3600 sec
Relay state on sensor error detection
Break / Make / Hold selectable
Relay contact ratings
250 Vrms max; 2 A AC or 1 A DC max; 500 VA max
Wiring Diagrams
Supply:
31
32
33
Inputs:
RTD, 2-wire
41 42 43 44
RTD, 3- / 4-wire
41 42 43 44
TC, internal
temperature sensor
41 42 43 44
+
Resistance, 2-wire
41 42 43 44
-
Resistance,
3- / 4-wire
Potentiometer
2-wire transmitter
Current
41 42 43 44
41 42 43 44
41 42 43 44
41 42 43 44
- Tx +
-
+
Voltage
41 42 43 44
-
+
Outputs:
Current
Voltage, 1 V
11 12 13 14
11 12 13 14
- mA +
-
V
+
Voltage, 10 V
11 12 13 14
-
V
+
Relays (only available on 884116)
21 22 23 24
R1
R2
Book 2 (14.3)
ePS-66
Process Control
1-800-633-0405
Prices as of April 13, 2016. Check Web site for most current prices.
Universal Signal Conditioners
Company
Information
Drives
Soft Starters
Dimensions 884114 and 884116
100mm [3.93"]
23.5mm [0.93"]
Motors
23.5mm [0.93"]
Power
Transmission
21
22
23
Motion: Servos
and Steppers
24
884116
Motor Controls
884114
Sensors:
Photoelectric
90mm [3.54"]
35mm [1.39"]
Sensors:
Proximity
Sensors:
Encoders
109mm [4.29"]
relay 1
relay 2
Sensors:
Limit Switches
UNIVERSAL
TRASMITTER
UNIVERSAL
TRASMITTER
Sensors:
Current
41
42
43
44
41
42
43
Sensors:
Pressure
44
Sensors:
Temperature
Programming/Display Module 884501
Sensors:
Level
Application:
• T he AutomationDirect 884501 module easily connects to the front of the
Universal Signal Conditioners 884114 and 884116 and is used to enter or adjust
the programming of the module.
•C
an be moved from one module to another and download the configuration of the first transmitter to subsequent transmitters.
• F ixed display for visualization of process data and status.
• Required for programming modules 884114 and 884116.
Sensors:
Flow
Pushbuttons
and Lights
Stacklights
Signal
Devices
Technical characteristics:
Process
• L CD display with 4 lines; Line 1 (H = 5.57 mm, 0.22 in) shows input signal, line 2
(H = 3.33 mm, 0.13 in) shows units, line 3 (H = 3.33 mm, 0.13 in) shows analog output or user defined text and line 4 shows communication and relay status.
• P rogramming access can be blocked by assigning a password. The password is saved in the transmitter in order to ensure against unauthorized
modifications to the configuration.
• Not capable of standalone or remote operation.
Relays and
Timers
Pneumatics:
Air Prep
11mm [0.43"]
Mounting/Installation:
Pneumatics:
Directional Control
Valves
23mm [0.91"]
• Snap 884501 onto the front of the 884114 or 884116 signal conditioners
Pneumatics:
Cylinders
Pneumatics:
Tubing
Selectable Engineering Units
ºC
ºF
%
A
bar
cm
ft
ft/h
ft/min
ft/s
g
gal/h
gal/min
GW
hp
hPa
Hz
in
in/h
in/min
in/s
ips
K
kA
kg
kJ
kPa
kV
kW
kWh
l
l/h
l/min
l/s
m
m/h
m/min
m/s
m/s2
m3
m3/h
m3/min
mA
mbar
mils
min
mm
mm/s
mol
MPa
mV
MW
MWh
N
Ohm
Pa
pH
rpm
s
S
t
t/h
uA
um
uS
V
W
Wh
yd
www.automationdirect.com/signal-conditioners
Pneumatics:
Air Fittings
Appendix
Book 2
71mm [2.80"]
OK
884501
Book 2 (14.3)
Process Control
ePS-67
Terms and
Conditions
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement