ASSA ABLOY HES 5000 Electric Strike Installation Instruction

Installation Diagrams
3
DIAGRAM 7: JAMB CUTOUT DIMENSIONS
DIAGRAM 6: JAMB VIEW
DIAGRAM 4: FAIL SAFE CONVERSION
b
a
Fail Safe position
Strike
Conversion
Convert
Mode
Verify
a. Loosen the two #2-56 screws located on the back of the
strike as shown above, but do not remove them.
b. Move screws from the top of the hole (Fail Secure position)
to the bottom hole (Fail Safe position) as shown above.
d. Verify the strike is now in the Fail Safe operation
mode. If the strike still operates as Fail Secure, be sure
screws are fully seated in the bottom position.
c. Tighten screws.
5000 with 501 Faceplate
4-7/8” x 1-1/4” Square Corner Faceplate
ANSI Metal Jamb Installations
1 -1/4"
[31.8]
1 -1/4"
[31.8]
4 -7/8"
[124]
3 -3/8"
[85.7]
4 -7/8"
[124]
11/16"
[17.5]
3/32"
[2.3]
Inches
[mm]
4 -1/8"
[104.8]
1 -7/16"
[36.6]
Cutout Templates
4
5000 with 501A Faceplate
4-7/8” x 1-1/4” Radius Corner Faceplate
Aluminum Jamb Installations
1 -1/4"
[31.8]
R 1/8"
[3]
1 -1/4"
[31.8]
4 -7/8"
[124]
3 -3/8"
[85.7]
4 -7/8"
[124]
4 -1/8"
[104.8]
1 -7/16"
[36.6]
11/16"
[17.5]
3/32"
[2.3]
5000 with 502 Faceplate
7-15/16” x 1-7/16” Radius Corner Faceplate
Aluminum Frame Installations
1 -7/16"
[36.5]
3-3/8"
[85.7]
R 3/16"
[4.1]
7-15/16"
[201.6]
7 -15/16"
[201.6]
11/16"
[17.5]
3/32"
[2.3]
7 -7/16"
[189]
1 -7/16"
[36.6]
1 -7/16"
[36.6]