Operator Interface

Courtesy of Steven Engineering , Inc.

! 230 Ryan Way, South San Francisco, CA 94080-6370 ! Main Office: (650) 588-9200 ! Outside Local Area: (800) 258-9200 ! www.stevenengineering.com

O

P E R AT O R

I

N T E R FA C E

O

PERATOR

I

NTERFACE

S

OLUTIONS

Standard/Slim Pushbutton Boxes .................. HMI 1

Miniature Pushbutton Boxes .......................... HMI 2

Extra Deep Pushbutton Boxes ........................ HMI 3

Sloping Front Pushbutton Boxes ................... HMI 4

AP Desk Consoles ....................................... HMI 5-6

Consoles, Pedestals and Bases ..................... HMI 7

Series Operator Enclosures ............................ HMI 8

PC Computer Enclosures .......................... HMI 9-10

VIP Flat Panel Enclosures ....................... HMI 11-18

Optipanel HMI Enclosures ...................... HMI 19-24

CP Pendant Arm Enclosures .................. HMI 25-26

CP Pendant Arm Systems ....................... HMI 27-30

CP-Vertical Pendant Arm Systems ......... HMI 31-32

CP Accessories ........................................ HMI 33-50

Technical Drawings ................................. HMI 51-79

13599-IBG-OpInt-HMI.fpo 8/27/01 10:42 AM Page 2

Courtesy of Steven Engineering , Inc.

! 230 Ryan Way, South San Francisco, CA 94080-6370 ! Main Office: (650) 588-9200 ! Outside Local Area: (800) 258-9200 ! www.stevenengineering.com

Standard/Slim Pushbutton Boxes

NEMA Rated Pushbutton Enclosures

These NEMA rated boxes are designed for indoor use to house pushbuttons, selector switches, pilot lights, etc., and to protect such equipment against dirt, dust, and spraying of water, oil or coolant.

Several models of these pushbutton enclosures can be mounted onto a Rittal Electromate column and base and used as an operator station.

Av ailable In

St ain e e

Pages NON 25-26 l l

Miniature Pushbutton Boxes

NEMA Rated Pushbutton Enclosures

These NEMA rated boxes are designed for indoor use to house pushbuttons, selector switches, pilot lights, etc., which mount in miniature “4-way” pushbutton holes, and to protect such equipment against dirt, dust, and spraying of water, oil or coolant.

Several models of these pushbutton enclosures can be mounted onto a Rittal Electromate column and base and used as an operator station.

Av ailable In

St St ain

Page NON 27 e e l l

Configuration

• Continuously welded seams, finished smooth

• Poron strip gasket

• Standard pushbutton holes accept all brands of 30.5 mm “4-way” oil tight pushbuttons, switches, and pilot lights

• Captive plated screws to hold cover

• External mounting brackets

Technical Specifications

Material:

Enclosure/cover: 14 gauge carbon steel

Finish/color:

Enclosure/cover: polyester-urethane powder coat over phosphatized surfaces, inside and outside – ANSI 61 grey

Protection Ratings

NEMA Type

1 4 4X 12 13

Certifications/Approvals

Listings

UL CUL CSA TÜV

Technical Drawings

Pages . . . . . . . . . . . . . . . . . . . . . . . . .HMI 51-52

Part No.

E 1PB

E 2PB

E 3PB

E 4PB

E 4SPB

E 5PB

E 6PBVL

E 6PB

E 8PB

E 9PB

*

H

3.50

5.75

8.00

10.25

7.25

12.50

14.75

9.50

20.25

9.50

* Can be mounted to a Rittal Electromate column and base.

Standard Pushbutton Box

Outside dimensions (inches)

W

3.25

3.25

3.25

3.25

6.25

3.25

3.25

6.25

3.25

8.50

Part No.

Slim Pushbutton Box

E 1PBSL

E 2PBSL

E 3PBSL

E 4PBSL

E 6PBSL

*

H

4.00

6.25

8.50

10.75

16.25

* Add an additional 1" between pushbutton holes at center of enclosure.

Outside dimensions (inches)

W

2.50

2.50

2.50

2.50

2.50

D

2.75

2.75

2.75

2.75

3.00

2.75

2.75

3.00

2.75

3.00

D

2.50

2.50

2.50

2.50

2.50

Accessories

Oil tight hole seals

See accessories section

See accessories section

See accessories section

See accessories section

See accessories section

See accessories section

See accessories section

See accessories section

See accessories section

See accessories section

Accessories

Oil tight hole seals

See accessories section

See accessories section

See accessories section

See accessories section

See accessories section

HMI 1

Configuration

• Continuously welded seams, finished smooth

• Poron strip gasket

• Standard pushbutton holes accept all brands of 22.5 mm “4-way” oil tight pushbuttons, switches, and pilot lights

• Captive plated screws hold cover

• External mounting brackets

Technical Specifications

Material:

Enclosure/cover: 14 gauge carbon steel

Finish/color:

Enclosure/cover: polyester-urethane powder coat over phosphatized surfaces, inside and outside – ANSI 61 grey

Protection Ratings

NEMA Type

1 4 4X 12 13

Certifications/Approvals

Listings

UL CUL CSA TÜV

Technical Drawings

Page . . . . . . . . . . . . . . . . . . . . . . . . . . . HMI 53

Part No.

E 1PBGM

E 2PBGM

E 3PBGM

E 4PBGM

E 6PBGM

*

H

3.25

5.13

7.00

8.88

8.50

* Can be mounted to a Rittal Electromate column and base.

Pushbutton Box

Outside dimensions (inches)

W

2.75

2.75

2.75

2.75

5.00

D

3.50

3.50

3.50

3.50

4.25

Accessories

Oil tight hole seals

See accessories section

See accessories section

See accessories section

See accessories section

See accessories section

HMI 2

13599-IBG-OpInt-HMI.fpo 8/27/01 10:42 AM Page 4

Courtesy of Steven Engineering , Inc.

! 230 Ryan Way, South San Francisco, CA 94080-6370 ! Main Office: (650) 588-9200 ! Outside Local Area: (800) 258-9200 ! www.stevenengineering.com

Extra Deep Pushbutton Boxes

NEMA Rated Pushbutton Enclosures

These NEMA rated boxes are designed for indoor use to house pushbuttons, selector switches, pilot lights, etc., and to protect such equipment against dirt, dust, and spraying of water, oil or coolant. Their extra depth accommodates stacked pushbutton units.

Several models of these pushbutton enclosures can be mounted onto a Rittal Electromate column and base and used as an operator station.

Av ailable In

St

St ain

Page NON 28 e e l l

Sloping Front Pushbutton Boxes

NEMA Rated Pushbutton Enclosures

These NEMA rated boxes feature a slanted front and are designed for indoor use to house pushbuttons, selector switches, pilot lights, etc., and to protect such equipment against dirt, dust, and spraying of water, oil or coolant.

Several models of these pushbutton enclosures can be mounted onto a Rittal Electromate column and base and used as an operator station.

Configuration

• Continuously welded seams, finished smooth

• Poron strip gasket

• Standard pushbutton holes accept all brands of 30.5 mm “4-way” oil tight pushbuttons, switches, and pilot lights

• Captive plated screws hold cover

• External mounting brackets

Technical Specifications

Material:

Enclosure/cover: 14 gauge carbon steel

Finish/color:

Enclosure/cover: polyester-urethane powder coat over phosphatized surfaces, inside and outside – ANSI 61 grey

Protection Ratings

NEMA Type

1 4 4X 12 13

Certifications/Approvals

Listings

UL CUL CSA TÜV

Technical Drawings

Page . . . . . . . . . . . . . . . . . . . . . . . . . . . .HMI 53

Part No.

E 1PBXD

E 2PBXD

E 3PBXD

E 4PBXD

E 6PBXD

*

* Can be mounted to Rittal Electromate column and base.

H

4.00

6.00

8.00

10.00

9.50

Pushbutton Box

Outside dimensions (inches)

W

4.00

4.00

4.00

4.00

6.25

D

4.75

4.75

4.75

4.75

4.75

Accessories

Oil tight hole seals

See accessories section

See accessories section

See accessories section

See accessories section

See accessories section

Configuration

• Continuously welded seams, finished smooth

• Poron strip gasket

• Standard pushbutton holes accept all brands of 30.5 mm “4-way” oil tight pushbuttons, switches, and pilot lights

• Captive plated screws hold cover

• External mounting brackets

Part No.

E 1PBA

E 2PBA

E 3PBA

E 4PBA

E 4SPBA

E 6PBA

E 9PBA

H

3.50

3.50

3.50

3.50

7.25

7.25

9.50

Technical Specifications

Material:

Enclosure/cover: 14 gauge carbon steel

Finish/color:

Enclosure/cover: polyester-urethane powder coat over phosphatized surfaces, inside and outside – ANSI 61 grey

Protection Ratings

NEMA Type

1 4 4X 12 13

Certifications/Approvals

Listings

UL CUL CSA TÜV

Technical Drawings

Page . . . . . . . . . . . . . . . . . . . . . . . . . . . .HMI 54

Pushbutton Box

Outside dimensions (inches)

W

3.25

5.50

7.75

10.00

6.25

8.50

8.50

D

4.88

4.88

4.88

4.88

6.75

6.75

7.88

Accessories

Oil tight hole seals

See accessories section

See accessories section

See accessories section

See accessories section

See accessories section

See accessories section

See accessories section

HMI 3 HMI 4

13599-IBG-OpInt-HMI.fpo 8/27/01 10:42 AM Page 6

Courtesy of Steven Engineering , Inc.

! 230 Ryan Way, South San Francisco, CA 94080-6370 ! Main Office: (650) 588-9200 ! Outside Local Area: (800) 258-9200 ! www.stevenengineering.com

AP Desk Consoles

Desk Console System

Rittal's AP Series console system answers the need for variability, performance, safety, assembly, and aesthetics for operator interface applications. The AP design allows unlimited combinations of bottom, center, and top sections. Also available are complete, one-piece desk units. Their perfect design facilitates easy assembly and provides security and usability.

Universal Console System

The universal AP console is the newest addition to the AP family. It features a uni-body construction with an integrated

25 mm interior hole pattern for easy component installation.

Available with or without an optional desk unit, it also features a full-sized mounting panel.

Configuration

• Doors front and rear on specific models

• Safety catches and cables secure open lid

• Mounting panel included

• Depth adjustable mounting panel for AP

2610600/2640600/2650600/2694600

• 2-part and 3-part cable entry panels

• Integrated mounting rails in center section

• Knife-edge design protects against liquid entry

• Maximum strength and stability through unibody construction

• E-coat primer and powder paint provide superior corrosion resistance

• Integrated grounding provisions

• Foamed-on gasket

• Modular bottom, center, and top sections allow a variety of combinations for specific applications

• Top sections are available in two heights and depths

• System installation holes (Univeral console)

(25 mm spacing) PS

• Desk unit can be rotated 180° for either sloped or horizontal desk surface

(Universal console)

• Full height mounting panel (Universal console)

Technical Specifications

Material:

Sheet steel housing: 16 ga/1.5 mm

Doors and lids: 14 ga/2 mm

Mounting panel: 11 ga/3 mm, hot dipped galvanized zinc

Finish/color:

Housing, doors, and lids: E-coat primed, powder painted, RAL 7032 pebble grey

Mounting panel: Type M

Universal console trim: RAL 5018 teal green

Protection Ratings

NEMA Type

1 4 4X 12 13

Certifications/Approvals

Listings

UL CUL CSA TÜV

Technical Drawings

Pages . . . . . . . . . . . . . . . . . . . . . . . . .HMI 55-59

Part No.

Bottom Section

2600600 1

2620600 2

2610600 3

2640600 4

2650600 5

Center Section

2611200 1

1 f

2 f

1 f/1 r

2 f/2 r

2 f/2 r

2641200 2

2613200 3

2643200 4

2653200 5

Top Section

2612600 1

2642600 2

2614600

2647600

2648600 4

2649600

3

2644600 4

3

5

1 f

1 f

1 f/1 r

1 f/1 r

1 f/ 1 r

1 f/1 r

1 f/1 r

Desk Console System

2666600

2668600

1 f

1 f

1

1

1

1

1

2670600

2672600

Universal Console System

2694600

Number

Of

Doors

1 f

1 f

2 f/1 r

H

26.38

26.38

26.38

26.38

26.38

7.87

7.87

7.87

7.87

7.87

16.93

16.93

16.93

16.93

24.80

24.80

24.80

37.80

37.80

37.80

37.80

51.18

inches

W

31.50

47.24

31.50

47.24

62.99

31.50

47.24

31.50

47.24

62.99

31.50

47.24

31.50

47.24

31.50

47.24

62.99

23.62

31.50

39.37

47.24

23.62

Enclosure

Exact outside dimensions

D

15.75

15.75

19.69

19.69

19.69

33.46

33.46

37.40

37.40

37.40

15.75

15.75

19.69

19.69

23.62

23.62

23.62

15.75/18.90

15.75/18.90

15.75/18.90

15.75/18.90

16.42/19.76

H

670

670

670

670

670

200

200

200

200

200

430

430

430

430

630

630

630

960

960

960

960

1300 mm

W

800

1200

800

1200

1600

800

1200

800

1200

1600

800

1200

800

1200

800

1200

1600

600

800

1000

1200

600

D

400

400

500

500

500

850

850

950

950

950

400

400

500

500

600

600

600

400/480

400/480

400/480

400/480

417/502

Note: When specifying two or three-part consoles, please use the superscript number to match bottom, center and top sections.

H

23.62

23.62

20.94

20.94

20.94

13.78

13.78

13.70

13.70

21.57

21.57

21.57

30.71

30.71

30.71

30.71

47.05

-

-

-

-

inches

28.15

43.90

27.64

43.39

59.13

28.15

43.90

28.62

44.37

28.62

44.37

60.12

20.87

28.74

36.61

44.49

19.57

-

-

-

-

-

W

Mounting Panel

Dimensions mm

H

350

350

348

348

548

548

548

780

780

780

780

-

-

-

-

-

600

600

532

532

532

1195

W

715

1115

702

1102

1502

715

1115

727

1127

727

1127

1527

530

730

930

1130

497

-

-

-

-

-

Part No.

4" high

Bottom Section

2600600

2620600

2610600

2640600

2650600

Center Section

2611200

2901200

2921200

2841200

2851200

2863200

2641200

2613200

2643200

2653200

Desk Console System

2666600

2911200

2668600

2670600

2672600

2901200

2891200

2921200

-

-

-

-

-

Bases

8" high

2902200

2922200

2842200

2852200

2864200

-

-

-

-

-

2912200

2902200

2892200

2922200

Base castors

-

-

-

-

-

4570000

4570000

4570000

4570000

4570000

4570000

4570000

4570000

4570000

Console lid

Accessories

Aluminum pencil ledge

Handles

Ergoform-S Pushbutton

Inductive Inductive Inductive mouse (COM mouse pad mouse pad or PS/2) (COM) (PS/2)

Mouse pad support

2615200

2645200

2616200

2646200

2656200

2615200

2645200

2616200

2646200

2656200

-

-

-

-

2678000

2682000

2678000

2682000

-

-

-

-

-

-

2676000

2678000

2680000

2682000

-

-

-

-

-

2450000

2450000

2450000

2450000

2450000

2450000

2450000

2450000

2450000

-

-

-

-

-

2468000

2468000

2468000

2468000

2468000

2468000

2468000

2468000

2468000

6445000

6445000

6445000

6445000

6445000

-

-

-

-

-

6445000

6445000

6445000

6445000

6444000

6444000

6444000

6444000

6444000

-

-

-

-

-

6444000

6444000

6444000

6444000

6444500

6444500

6444500

6444500

6444500

-

-

-

-

-

6444500

6444500

6444500

6444500

2380000

2380000

2380000

2380000

2380000

-

-

-

-

-

2380000

2380000

2380000

2380000

Part No.

4" high

Universal Console System

2694600

2807200

Bases

8" high

2808200

Desk unit

2696200

Accessories

Ergoform-S

Handles

Pushbutton insert

2450000 2468000

Inductive Inductive mouse (COM mouse pad or PS/2) (COM)

Inductive mouse pad

(PS/2)

6445000 6444000 6444500

Mouse pad support

2380000

HMI 6

HMI 5

13599-IBG-OpInt-HMI.fpo 8/27/01 10:42 AM Page 8

Courtesy of Steven Engineering , Inc.

! 230 Ryan Way, South San Francisco, CA 94080-6370 ! Main Office: (650) 588-9200 ! Outside Local Area: (800) 258-9200 ! www.stevenengineering.com

Consoles, Pedestals and Bases

Carbon Steel Desk Units

These NEMA rated individual desk units are designed for indoor use to meet the requirements of most operator interface applications.

Control components such as meters, pushbuttons, pilot lights, and switches, can be mounted on the top-hinged control panel that slants 30° or 60°.

Pedestal and base assemblies allow the desk units to be floor mounted. Wiring connections can be made through the base, the vertical column or directly to the desk unit.

Av ailable In

St

St ain

Page NON 29 e e l l

Series Operator Enclosures

Carbon Steel Freestanding Consoles

These NEMA rated freestanding steel operator consoles are designed for indoor use and meet the requirements of a variety of operator interface applications.

Control instruments such as pushbuttons, pilot lights, meters, switches, etc., can be mounted on the control panel that slants

16° (Series 9), 45° (Series 12) and 60° (Series 14). Optional console top and/or writing desk provide additional flexibility.

Control equipment components can be mounted on removable sub-panels on the side and back walls inside the enclosure.

Configuration

Console:

• Continuously welded seams, finished smooth

• Poron strip gasket

• Control panel slants 30° or 60° and is attached with a continuous steel hinge at top and secured with captive screws

Pedestal/column:

• Removable, gasketed access plate in column body

• Urethane gasket

Base:

• Pre-punched holes to accept column

• Two formed channels welded to underside of base

Technical Specifications

Material:

Console/desk unit: 14 gauge carbon steel

Pedestal/column: 14 gauge carbon steel with 10 gauge steel mounting flange at each end

Base: 12 gauge carbon steel

Finish/color:

All steel parts: polyester-urethane powder coat over phosphatized surfaces, inside and outside – ANSI 61 grey

Part No.

Consoles

E 8C8

E 8C12

E 8C16

E 12C12

E 12C16

E 12C20

E 16C20

E 16C24

Pedestals

E 44CCOL

E 66CCOL

Bases

E 18SBASE

E 24SBASE

H

8.00

8.00

8.00

12.00

12.00

12.00

16.00

16.00

4.00

6.00

18.00

24.00

Console

Outside dimensions (inches)

W

8.00

12.00

16.00

12.00

16.00

20.00

20.00

24.00

4.00

6.00

18.00

24.00

Protection Ratings

NEMA Type

1 4 4X 12 13

Certifications/Approvals

Listings

UL CUL CSA TÜV

Technical Drawings

Pages. . . . . . . . . . . . . . . . . . . . . . . . . HMI 60-61

D

7.09

7.09

7.09

9.09

9.09

9.09

11.09

11.09

-

-

-

-

Configuration

• Continuously welded seams, finished smooth

• Urethane gasket

• Control panel slants (Series 9 slants 16°,

Series 12 slants 45°, Series 14 slants 60°) and is attached with a continuous steel hinge at front and secured with captive screws

• Mechanical brace to hold control panel open to 90°

• 3-point latch with oil tight key locking handle

• Mounting panel provisions installed

• Print pocket included

Technical Specifications

Material:

Enclosure/door: 14 gauge carbon steel

Finish/color:

Enclosure/door: polyester-urethane powder coat over phosphatized surfaces,

ANSI 61 grey outside and white inside

Optional mounting panels: painted white

Protection Ratings

NEMA Type

1 4 4X 12 13

Certifications/Approvals

Listings

UL CUL CSA TÜV

Technical Drawings

Pages . . . . . . . . . . . . . . . . . . . . . . . .HMI 62-64

Part No.

E C924B

E C936B

Height

48.00

48.00

Width

24.00

36.00

Depth

18.00

18.00

Rear mounting panel

E 30P20

E 30P30

Series 9 Console

Rear mounting panel size

27.00

27.00

17.00

27.00

Side mounting panel

E 30P20

E 30P20

Side mounting panel size

27.00

27.00

17.00

17.00

Caster kit

E C10C

E C10C

Body

Catalog No.

Body

Height

Top

Height

Width

36.00

20.00

36.00

32.00

Series 12 Console

Rear mounting panel size

Top

Catalog

No.

30.00

E C12T

Instrument panel

19.19

35.19

Access panel

20.19

32.19

Writing

Desk

Catalog

No.

E C12W

Caster

Kit

Catalog

No.

E C12C E C12B

Series 14 Console

Body

Part No.

Top

Part No.

Body height

Top height

Width

Half

Mounting

Panel

Part No.

H

Half mounting panel size

W

Full

Mounting

Panel

Part No.

panel size

H

Full mounting

W

Swingout

Mounting

Panel

Part No.

Swingout mounting panel size

H W

Writing

Desk

Relay

Rack

Caster

Kit

Part No.

Part No.

Part No.

E C14B E C14T

50.00

16.00

24.00

E C14P2

22.00

17.00

E C14P3

42.50

17.00

E C14P1

22.00

18.13

E C14W E C14R E C12C

E C1436B E C1436T

50.00

16.00

36.00

E C1436P2

22.00

29.00

E C1436P3

42.50

29.00

E C1436P1

22.00

30.13

E C1436W E C14R E C12C

HMI 8 HMI 7

13599-IBG-OpInt-HMI.fpo 8/27/01 10:42 AM Page 10

Courtesy of Steven Engineering , Inc.

! 230 Ryan Way, South San Francisco, CA 94080-6370 ! Main Office: (650) 588-9200 ! Outside Local Area: (800) 258-9200 ! www.stevenengineering.com

PC Computer Enclosures

TS8 PC Enclosures

NEW! Check out the latest in enclosure technology with Rittal’s latest TS-based PC enclosure. Based on the revolutionary

TS8 16-fold frame, these PC enclosures feature two levels of installation in the vertical profile for increased space and internal mounting for component shelves and more.

Standard PC Freestanding Enclosures

PCs are important interfaces in today's computer-aided manufacturing environment. The Rittal PC computer enclosure houses monitor, CPU, keyboard, printer, and/or other components in one cabinet that is equally at home on the shop floor as in an office environment.

Standard PC ValuePack Enclosures

Designed to offer a pre-packaged PC solution, the Rittal PC

ValuePack offers an enclosure that is based on standard components that can be ordered with just a single number.

PC Desktop/Pedestal Enclosures

The PC Desktop/Pedestal enclosure is a one piece unit designed to sit on a desk, table top or a pedestal.

Part No.

8366000

8366100

8368000

8368100

Part No.

Configuration

Safety glass

Safety glass

Safety glass

Safety glass

Configuration

4603603

4603604

4603703

4603704

4603820

4603913

4603920

4609703

4609920

21" PC Enclosure

4820210

Solid front panel

Solid front panel

Safety glass

Safety glass

Solid front panel

Safety glass

Safety glass

Safety glass

Safety glass

Safety glass

Keyboard storage

Drawer

Fold-down

Drawer

Fold-down

Keyboard storage

Drawer

Console

Drawer

Console

Fold-down

Drawer/Panel

Fold-down

Drawer

Fold-down

TS8 PC Enclosures

Availability Exact outside dimensions

July 2001

August 2001

September 2001

September 2001

H

63

63

63

63 inches

W

24

24

24

24

D

25

25

33

33

Standard PC Freestanding Enclosures

Exact outside dimensions

63

63

63

63

H

63

63

63

63

63 inches

W

24

24

24

24

24

24

24

24

24

26

26

26

26

D

26

26

26

34

34

H

1600

1600

1600

1600

1600

1600

1600

1660

1600

Drawer 63 32

PC ValuePack Enclosures

32 1600

Part No.

Base PC enclosure

Climate

Control

9968185

4603703

9968186

4609703 method

2400 BTU Air Conditioner

2400 BTU Air Conditioner

9968187

4603703 115 cfm Filter Fan w/Outlet

9968188

4609703 115 cfm Filter Fan w/Outlet

Part No.

4617703

4617704

4617913

4617920

Configuration

Safety glass

Safety glass

Safety glass

Safety glass

Reference part number

3262100

3262100

3325117/207

3325117/207

Keyboard storage

Drawer

Console

Drawer/Panel

Fold-down

Exact outside dimensions

H

63

63

63

63 inches

W

24

24

24

24

D

26

34

26

34

PC Desktop/Pedestal Enclosures

Exact outside dimensions

H

30

30

30

30 inches

W

24

24

24

24

D

26

26

26

26

H

750

750

750

750

H

1600

1600

1600

1600

H

1600

1600

1600

1600

600

600

600

600 mm

W

600

600

600

600

600

800 mm

W

600

600

600

600 mm

W

600

600

600

600 mm

W

600

600

600

600

HMI 9

650

650

650

650

D

650

650

650

850

850

800

D

650

650

650

650

D

650

850

650

850

D

636

636

836

836

Configuration

TS8 PC Enclosures

• All standard TS8 enclosure features

• Viewing door w/security glass

• Integrated pull-out keyboard w/mouse pad that can be pulled out left/right

• Vented monitor and component shelves prevent heat build-up

Standard PC Freestanding Enclosures

• Knife-edge design averts liquid away from gasket

• Easy access to interior components from all sides

• Integrated grounding provisions on all surfaces

• Time saving quick assembly method through the use of the .98"/25 mm hole pattern

• Foamed-on gasket

• Rear door

• Accepts up to 19" monitors (21” on select models)

• E-coat primer and powder paint provide superior corrosion resistance

PC ValuePack Enclosures

• Pre-installed climate control

• Pullout keyboard/integrated mouse pad

• Additional vented shelf

• Casters with brakes

• Powerstrip

Technical Specifications

TS8/Standard/ValuePack Enclosures

Material:

Body: 16/1.5 mm sheet steel

Rear door: 14 ga/2 mm sheet steel

Side walls: 16 ga/1.5 mm sheet steel

Bottom front door: 14 ga/2 mm sheet steel

Corner trim panels: extruded aluminum

Monitor panel: 3 mm security glass with

19" or 21" mask

Keyboard front panel: plastic UL 94-VO

Finish/color:

Body: E-coat primed, powder painted,

RAL 7035 pebble grey

Corner trim panels: powder painted,

RAL 5018 teal green

PC Desktop/Pedestal Enclosures

Material:

Housing and rear door: 16 ga/1.5 mm sheet steel

Viewing door: aluminum with safety glass

Finish/color:

Body: E-coat primed, powder painted,

RAL 7035 pebble grey

Corner trim panels: powder painted,

RAL 5018 teal green

Protection Ratings

NEMA Type

1 4 4X 12 13

Certifications/Approvals

Listings

UL CUL CSA TÜV

Technical Drawings

Pages . . . . . . . . . . . . . . . . . . . . . . . .HMI 65-68

Part No.

TS/PC Base*

*Available

8366000

8366100

8368000

8368100

11/2001

8800920

8800920

8800930

8800930

W

8601600

4" high base

D

8601060

8601600

8601600

8601600

8601060

8601080

8601080

TS8 PC Enclosure Accessories

W

8602600

8" high base

D

8602060

8602600

8602600

8602600

8602060

8602080

8602080

Tower PC Carriage

Carriage Installation kit Extra shelf

4641000 8612060 4642000

4641000

4641000

4641000

8612060

8612080

8612080

4642000

4642000

4642000

Vented shelf* Inductive Inductive Inductive

*Available mouse (COM mouse pad mouse pad

9/2001

8800900 or PS/2)

6444500

(COM)

6444000

(PS/2)

6445000

8800900

8800910

8800910

6444500

6444500

6444500

6444000

6444000

6445000

6445000

6445000

Standard PC Freestanding Enclosure Accessories

Part No.

4" high

Bases

Mobile

Reinforced castors

Mouse pad

Shelf

Carriage

Tower PC Carriage

Installation Kit Extra

Inductive mouse

Inductive Inductive Mouse pad Mouse mouse pad mouse pad shelf (COM or PS/2) (COM) (PS/2) support holder

4603603

2813200 4640600 4634000 4614000 4619660 4641000 4376/4183/4162/9962544 4642000

4603604

2813200 4640600 4634000 4619660 4641000 4376/4183/4162/9962544 4642000

6444500

6444500

6444000

6444000

6445000

6445000

2380000

2380000

2382000

2382000

4603703

2813200 4640600 4634000 4614000 4619660 4641000 4376/4183/4162/9962544 4642000

4603704

2813200 4640600 4634000 4619660 4641000 4376/4183/4162/9962544 4642000

4603820

2813200 4640600 4634000 4613000 4619660 4641000 4376/4183/4162/9962544 4642000

4603913

2813200 4640600 4634000 4614000 4619660 4641000 4376/4183/4162/9962544 4642000

6444500

6444500

6444500

6444500

6444000

6444000

6444000

6444000

6445000

6445000

6445000

6445000

2380000

2380000

2380000

2380000

2382000

2382000

2382000

2382000

4603920

2813200 4640600 4634000 4613000 4629660 4641000 4376/4183/4162/9962544 4642000

4609703

2846200 4640800 4634000 4614000 4619680 4641000 4377/4183/4162/9962544 4642000

4609920

2846200 4640800 4634000 4613000 4629680 4641000 4377/4183/4162/9962544 4642000

21" PC Enclosure

4820210

2848200 2986200 4634000 included – 4641000 7127035 4642000

6444500

6444500

6444500

6444500

6444000 6445000 2380000 2382000

6444000 6445000 2380000 2382000

6444000 6445000 2380000 2382000

6444000 6445000 2380000 2382000

Part No.

4" high

Bases

Mobile

9968185

2813200 4640600

9968186

2846200 4640800

9968187

2813200 4640600

9968186

2846200 4640800

Reinforced Mouse castors pad

Shelf

PC ValuePack Enclosure Accessories

Carriage

Tower PC Carriage

Installation Kit

4634000 4614000 4619660 4641000 4376/4183/4162/9962544

4634000 4614000 4619680 4641000 4377/4183/4162/9962544

4634000 4614000 4619660 4641000 4376/4183/4162/9962544

4634000 4614000 4619680 4641000 4377/4183/4162/9962544

Extra shelf

4642000

4642000

4642000

4642000

Inductive Inductive Inductive Mouse pad pad mouse support

(COM or PS/2) (COM)

6444500 6444000

6444500

6444500

6444500

6444000

6444000

6444000

(PS/2)

6445000

6445000

6445000

6445000

2380000

2380000

2380000

2380000

Mouse holder

2382000

2382000

2382000

2382000

Part No.

4617703

4617704

4617913

4617920

Pedestals

Without cable With cable conduit

6141000 conduit

6141100

6141000

6141000

6141000

6141100

6141100

6141100

PC Desktop/Pedestal Enclosure Accessories

Pedestal accessories

Mounting Casters bracket

6147000

6147000

6147000

6147000

6148000

6148000

6148000

6148000

Mouse pad

4614000

-

4614000

4613000

Shelf

4619660

4619660

4619660

4629660

Inductive mouse

(COM or PS/2)

6445000

6445000

6445000

6445000

Inductive mouse pad

(COM)

6444000

6444000

6444000

6444000

Inductive mouse pad

(PS/2)

6444500

6444500

6444500

6444500

Mouse pad support

2380000

2380000

2380000

2380000

Mouse holder

2382000

2382000

2382000

2382000

HMI 10

13599-IBG-OpInt-HMI.fpo 8/27/01 10:42 AM Page 12

Courtesy of Steven Engineering , Inc.

! 230 Ryan Way, South San Francisco, CA 94080-6370 ! Main Office: (650) 588-9200 ! Outside Local Area: (800) 258-9200 ! www.stevenengineering.com

VIP Flat Panel Enclosures

Flat Panel Enclosure System

Rittal's VIP 6000 operator interface system offers modular solutions for countless flat panel applications. The VIP is made-to-order in a variety of sizes and versions that can be adapted to your specific requirements.

Its contemporary design showcases control technology in an attractive package, as well as provides optimum ergonomics for the operator while keeping heat-sensitive electronic components cool.

The modular flat panel system is available with a keyboard housing or tray. The keyboard housing lets you intregrate your own control panel and the keyboard tray accommodates most standard PC keyboards.

This efficient operator interface system also offers a wide variety of accessories including vertical and/or horizontal handle sets, clip boards, and may be combined with support arm systems CP-L, CP-XL, or CP-Vertical.

New Frame Bezel Designs

Two new frame bezel designs have been added to the current

VIP wide frame bezel that will allow further customization of the

VIP enclosures. The new narrow frame bezel enhances the aesthetics of the VIP and reduces the overall size of the VIP by almost 2". The new “combined” frame bezel has the same features of the narrow bezel plus integrated rubberized grips on the sides.

Configuration

• Three frame designs allow further customization

• Designed to be used with CP-L, CP-XL, or

CP-Vertical pendant arm systems

• Mounting channels on all sides facilitate component installation

• The interior of the housing is accessible through either a hinged rear door or a screwed-on aluminum rear panel

• A mounting kit can be clipped-in to accommodate installation of a variety of control panel components and displays

• Colored plastic strips cover mounting screws and enhance the design of your product

• Cable duct for easy routing from enclosures to keyboard housing

• Enclosures can be ordered with, without, or a combination of cooling fins

• The enclosure front can be partitioned with optional cross mullion

• Optional accessories such as handles, clipboards, and front panels are available

Technical Specifications

Material:

Housing and front frame: extruded aluminum

Frame corner pieces: zinc die-cast

Corner protection pieces for housing: self-extinguishing plastic

Trim strips: flexible plastic

Finish:

• Housing frame: natural anodized

• Front frame and frame corner pieces:

textured enamel; RAL 7035 light grey

• Trim strips: RAL 5018 teal, RAL 5012 blue,

RAL 4006 purple, RAL 7030 grey, RAL

3001 red, RAL 7024 graphite grey

• Wide frame: RAL 7035 light grey

• Narrow frame: RAL 7035 light grey

• Combined frame: RAL 7035 light grey with soft rubber coating (RAL 7024)

Protection Ratings

NEMA Type

1 4 4X 12 13

Certifications/Approvals

Listings

UL CUL CSA TÜV

Technical Drawings

Pages . . . . . . . . . . . . . . . . . . . . . . . .HMI 69-74

.009 Wide VIP 6000 Frame

Wide front frame of extruded aluminum sections and die-cast zinc corner pieces.

.209 Narrow VIP 6000 Frame

Narrow front frame of extruded aluminum sections and die-cast zinc corner pieces.

.109 Combined VIP 6000 Frame

Combination of narrow front frame top and bottom (made from extruded aluminum sections and die-cast zinc corner pieces), plus soft frame at the sides.

Determine The Panel Dimensions

It's so easy.

First determine the height and width of your planned operator panel and check the following installation criteria. If these criteria are met, you are ready to install directly in one of three VIP frames, customized to your dimensions. The dimensions of the selected operating housing (3.), the keyboard housing (4.) and the handle sets etc. are automatically tailored to match the frame.

In exceptional cases to which other conditions apply, Rittal also has the answer.

1. 7 to 13 mm spacing of the fixing holes or bolts.

2. Front plate projection at sides with fixing holes at least 17 mm, and at sides without fixing holes at least 6 mm.

3. Front plate thickness variable, depending on the type of trim section.

4.

Installation depths:

Command panels = 155 mm, 185 mm, 295 mm,

328 mm, 438 mm.

Command panels with

45 mm deep rear panel*

= 200 mm, 230 mm, 340 mm, 373 mm, 483 mm.

Command panels

with 245 mm deep rear panel*

= 400 mm, 430 mm, 540 mm, 573 mm,

683 mm.

5. For versions with a hinged rear panel, the maximum installation depth is reduced by 27 mm in the vicinity of the lock.

* Other depths available on special request.

7 - 13

78.5

min. 17

5

B

R 38 max. 3.5

T

HMI 11 HMI 12

13599-IBG-OpInt-HMI.fpo 8/27/01 10:43 AM Page 14

3.5 Trim Colors

1

Teal (similar to RAL 5018)

2

Light blue (similar to

RAL 5012)

3

Bright red (similar to

RAL 3001)

4

Purple (similar to

RAL 4006)

5

Dark grey (similar to

RAL 7030)

6

Graphite grey (similar to

RAL 7024)

1

2

3

4

Courtesy of Steven Engineering , Inc.

! 230 Ryan Way, South San Francisco, CA 94080-6370 ! Main Office: (650) 588-9200 ! Outside Local Area: (800) 258-9200 ! www.stevenengineering.com

VIP 6000 Operator Enclosure Design

2* 3.1 Operator Enclosure

Installation depth:

1

6.10"/155 mm

2

7.28"/185 mm – screw-on

3

7.28"/185 mm – hinged

4

11.61"/295 mm – screw-on

5

11.61"/295 mm – hinged

6

12.91"/328 mm – screw-on

7

12.91"/328 mm – hinged

8

17.24"/438 mm – screw-on

9

17.24"/438 mm – hinged

1*

4*

6**

8**

3*

5*

7**

9**

Example

The colored numbers identify the version we’ve selected for our example.

*Use CP-L support arm system

**Use CP-XL support arm system

View from the top.

Other hinges available, if required.

1

3.2 Cross

Member/Sealing Bar

0

Without cross member or sealing bar

1

With one cross member

2

With one sealing bar

3

With two cross members

4

With two sealing bars

5

With one cross member and one sealing bar

6

With an adaptor plate*

7

With spacer and installation blanking plate above*

3)

8

With spacer and installation blanking plate below*

3)

0

1

2

6

* Special request only—extended lead times.

3) Only in connection with end trim

3.3 Cooling Fins

1

No fins

2

Fins on sides only

3

Fins all around

4

For aggressive cooling requirements.

1 2

7

8

3

1 1

1 1 2

For units with installation depths of 7.28" and 12.91"/185 and 328 mm, the housing part that is attached to the front frame (approximately 35 mm) is available without fins only.

1 2 3

3.4 Types Of Trim

Strips

1

Cover trim

2

End trim

3

Spacer trim

1 1 2 1

5

6

1 1 2 1 2

3.6 Support Arm

Connection

0

Without connection

1

Connection at top

2

Connection at bottom

3

Connection at top and at bottom (includes one cover panel)

Two different support arm systems are available:

• CP 6500 is designed for enclosures with installation depths of 6.10", 7.28", and

11.61"/155, 185, and 295 mm.

• CP 6000 is designed for enclosures with installation depths 12.91" and 17.24"/328 and 438 mm.

3.7 Cable Duct

Connection

0

2

0

Without connection to keyboard housing

3

1

1

2

Connection with enclosure duct connector

3

1 1 2 1 2 2

4

Connection with enclosure hinge connector

Connection with frame connector, rigid or adjustable

3.8 Rear Wall

1

Screw-on.**

2

Hinged, on longest side, lock with double bit insert.**

3

Expansion back plus

1.77"/45 mm* sheet steel, light grey (RAL 7035), hinged, integral screw lock.

4

Expansion back plus 9.64"/

245 mm* aluminum, light grey

(RAL 7035), screw-on.

5

Heavy-duty hinge for heavy installed equipment.**

6

Screw-fixed with built-in small

VIP air conditioners.

Recommended for Command

Panel versions 3, 5, 7, 9.

Condenser assembly, top left**

7

Screw-fixed with built-in small

VIP air conditioners.

Recommended for Command

Panel versions 3, 5, 7, 9.

Condenser assembly, top right**

* Other depths and designs on request.

** Aluminium, natural anodized

1

2

3

Connection with enclosure bracket connector

4

5

6

7

HMI 13

1 1 2 1 2 2 1

1 1 2 1 2 2 1 2

HMI 14

13599-IBG-OpInt-HMI.fpo 8/27/01 10:43 AM Page 16

Courtesy of Steven Engineering , Inc.

! 230 Ryan Way, South San Francisco, CA 94080-6370 ! Main Office: (650) 588-9200 ! Outside Local Area: (800) 258-9200 ! www.stevenengineering.com

VIP 6000 Keyboard Housing Design

4.1 Keyboard Enclosure

1

Installation depth:

4.13"/105 mm

2

Installation depth: 1.73"/44 mm

3

Keyboard lay-in tray, depth:

1.06"/27 mm

4

Keyboard lay-in tray, depth

1.06"/27 mm, with flexible cable tube connector

For standard keyboards. Without trim. All keyboard housings are custom made per your component dimensions and depending on your operator enclosure specifications.

1

3

2

4

Example

The colored numbers identify the version we’ve selected for our example.

1

4.4 Frame Connector

1

Rigid, 120° angle

2

Adjustable from 75° to 210°, adjustable in 7.5° increments.

Allows optimum ergonomic adjustment for each user.

3

Enclosure duct connector

4

Enclosure bracket connector

5

Frame hinge connector

Example

The colored numbers identify the version we’ve selected for our example.

2

1

4.2 Types Of Trim

Strips*

1 Cover trim

covers installation screws of front panel – for front panels

.

14"/3.5 mm thick.

2 End trim

covers gap between front panel and frame profile – for all front panel thicknesses.

3 Spacer trim

For components that must be flush with frame profile.

For front panels with a thickness of appr. 0.14"/3.5 mm.

* No selection is available for keyboard enclosure

3

and

4

.

Please indicate with an X in this case.

4.3 Trim Colors*

1

Teal (similar to RAL 5018)

2

Light blue (similar to

RAL 5012)

3

Red (similar to RAL 3001)

4

Purple (similar to RAL 4006)

5

Dark grey (similar to

RAL 7030)

6

Graphite grey (similar to

RAL 7024

Enclosure corner protection pieces will also be supplied in the specified color.

Other colors are available on special request.

* No selection is available for keyboard enclosure 3 and 4. Please indicate with an X in this case.

3

1

1

2

2

4

3

5

1 1

6

1 1 2

4.5 Cable Duct*

0

None

1

Rigid, light grey (RAL 7035) aluminum – for use with rigid frame coupling between operator enclosure and keyboard housing. Installation depth: 4.13"/105 mm

2

Flexible, light grey (RAL 7035) plastic – for use with rigid and flexible frame coupling between operator enclosure and keyboard housing.

Installation depth:

4.13" /105 mm, 1.73"/44 mm or 1.06"/27 mm

* No selection is available for keyboard enclosure

3.

Please indicate with an X in this case.

0

3

4

1

5

2

1 1 2 1

1 1 2 1 1

Part No.: 6392.009

Specification Numbers

For Operator Enclosure

1 1 2 1 2 2 1 2

Part No.: 6351.009

Specification Numbers

For Keyboard Housing

1 1 2 1 1

You can easily specify your complete VIP 6000 operator interface system just as we have demonstrated in our example.

• Detailed dimensions for the components selected can be found on pages 69-74.

HMI 15

HMI 16

13599-IBG-OpInt-HMI.fpo 8/27/01 10:43 AM Page 18

HMI 17

Courtesy of Steven Engineering , Inc.

! 230 Ryan Way, South San Francisco, CA 94080-6370 ! Main Office: (650) 588-9200 ! Outside Local Area: (800) 258-9200 ! www.stevenengineering.com

VIP 6000 Ordering Guide…

VIP 6000 Operator Housing

1. Select the frame

The frame type is determined from the Part No.

Wide frame

Narrow frame

Combination frame

0

Part No. CP

6 3 9 2

.

2

0 9

1

2. Enter the panel dimensions

Please state the number of front plates/panels used, their height

(H) x width (W), and/or the manufacturer/model.

Panel H x W

To p

Supply panel

Manufacturer / model

Panel H x W

Center

Supply panel

Manufacturer/ model

Panel H x W

Bottom

Supply panel

Manufacturer / model

Yes

Yes

Yes

No Cutouts

No Cutouts

No Cutouts

Yes

Yes

Yes

No

No

No

4. Operator housing handles

Please select Part No. and location.

4.1 For operator housing CP 6392.009*

Horizontal handle (one handle) Part No. 6101.009

Top Bottom

Vertical handle (1 set) Part No. 6102.009

Default is left and right

Both

4.2 For operator housing CP 6392.109/6392.209*

Corner handle (1 set) Part No. 6107.000

To p Bottom Both

Straight 7U (12

1/4

") handle (1 set) Part No. 6107.100

Both Horizontal Vertical

Straight 19" handle (1 set) Part No. 6107.200

Horizontal Vertical Both

* Handle cannot be located on bottom of operator housing if keyboard is used.

Note: When using a VIP enclosure (Part No. CP 6392.009/6351.009) in conjunction with a CP-Vertical pendant arm system, you must order a CP 6392.009 horizontal handle.

For VIP enclosures (Part No. CP 6392.109/.209 and CP 6531.109/.209) a specific

3. Determine the design of the operator housing

(see pages 69-70)

3.1 Installation depths

1

2

Installation depth 6.10"/155 mm

Installation depth 7.28"/185 mm

Installation depth 7.28"/185 hinged mm,

Installation depth 11.61"/295 mm

Installation depth 11.61"/295 hinged mm,

Installation depth 12.91"/328 mm

Installation depth 12.91"/328 hinged mm

Installation depth 17.24"/438 mm

Installation depth 17.24"/438 hinged mm,

3

4

5

6

7

8

9

3.2 Cross member /sealing bar

Without

1 cross mullion

1 sealing bar

2 cross mullions

2 sealing bars

1 cross mullion and 1 sealing bar

1 adaptor panel

1 spacer and 1 trim panel (top)

1 spacer and 1 trim panel (bottom)

3.3 Cooling fins

No fins

Fins at sides

Fins all round

3.4 Types of trim

Cover trim

End trim

Spacer trim

3.5 Trim colors

Turquoise (similar to RAL 5018)

Light blue (similar to RAL 5012)

Bright red (similar to RAL 3001)

Purple (similar to RAL 4006)

Stone (similar to RAL 7030)

Graphite grey (similar to RAL 7024)

6

7

8

2

3

4

5

0

1

3.6 Support arm connection

Without

Connection at top

Connection at bottom

Connection top and bottom

(including a cover plate)

3.7 Connection to the keyboard housing

Without

For frame connectors

For enclosure duct connectors

For enclosure bracket connectors

For frame hinge connectors

3.8. Rear panel

Screw mount

Hinged

Hinged, with extra installation depth 1.77"/45 mm

Screw mount, with extra installation depth 9.65"/245 mm

With heavy-duty hinge

Small air conditioner (SK 3201.100) with condenser at the top left

Small air conditioner (SK 3202.100) with condenser at the top right

Please enter your design code numbers here

1

2

3

1

2

3

4

5

6

1

2

3

0

1

2

3

2

3

0

1

4

4

5

6

1

2

3

7

It’s Easy By Fax…

VIP 6000 Keyboard Housing

1. Select the frame

The frame type is determined by the Part No.

Wide frame

0

Part No. CP

Narrow frame

6 3 5 1

.

2

0 9

Combination frame

1

2. Enter the panel dimensions

Please state the number of front plates/panels used, their height

(H) x width (W), and/or the manufacturer/model.

Keyboard

Panel H x W

Supply panel

Yes

Manufacturer/ model

No

Cutouts

Yes No

3. Determine the design of the keyboard housing

(see pages 71-72)

3.1 Installation depths

Installation depth 4.14"/105 mm

Installation depth 1.73"/44 mm

Depth 1"/27 mm with cable grommet 3

Depth 1"/27 mm for flexible cable duct 4

1

2

3.2 Type of trim

Cover trim

End trim

Spacer trim

3.3 Trim colors

Turquoise (similar to RAL 5018)

Light blue (similar to RAL 5012)

Bright red (similar to RAL 3001)

Purple (similar to RAL 4006)

Stone (similar to RAL 7030)

Graphite grey (similar to RAL 7024)

3.4 Keyboard housing connector

Frame connector, rigid

Frame connector, adjustable

Housing duct connector

Enclosure bracket connector

Frame hinge connector

3.5 Cable ducts

Without

Rigid

Flexible

1

2

3

Please enter the Part No. of your keyboard housing here.

3

4

1

2

5

6

3

4

1

2

5

0

1

2

Modifications as per attached.

4. Keyboard housing handles

Please select Part No. and location.

4.1 For keyboard housing CP 6351.009*

Horizontal handle (one handle) Part No. 6101.009

Bottom

Vertical handle (1 set) Part No. 6102.009

Default is left and right

4.2 For keyboard housing CP 6351.109/6351.209*

Corner handle (1 set) Part No. 6107.000

Bottom

Straight 7U (12

1/4

") handle (1 set) Part No. 6107.100

Horizontal

Straight 19" handle (1 set) Part No. 6107.200

Horizontal

* Handle cannot be located on bottom of operator housing if keyboard is used.

Note: When using a VIP enclosure (Part No. CP 6392.009/6351.009) in conjunction with a CP-Vertical pendant arm system, you must order a CP 6392.009 horizontal handle.

For VIP enclosures (Part No. CP 6392.109/.209 and CP 6531.109/.209) a specific

CP-Vertical release handle must be ordered.

From:

Company

Address

City/State/ ZIP

Telephone/ Fax

Contact Person

Position/Department

Date/Signature

HMI 18

13599-IBG-OpInt-HMI.fpo 8/27/01 10:43 AM Page 20

Courtesy of Steven Engineering , Inc.

! 230 Ryan Way, South San Francisco, CA 94080-6370 ! Main Office: (650) 588-9200 ! Outside Local Area: (800) 258-9200 ! www.stevenengineering.com

Optipanel HMI Enclosures

Smart HMI Solutions

Based on the design and construction of the popular Command

Panel operator enclosure line, Rittal’s new Optipanel is an ideal housing for applications where smaller enclosures need a special design. The Rittal Optipanel features an elegant, flat design for the utmost in HMI housings. The Optipanel operator housing can be customized exactly to the dimensions of your operator panel as well as other components.

Note:

See panel installation criteria on page HMI 12.

Configuration

• Standard version in 3.9" installation depth for commonly used front panels (sized at

19" x 7U)

• Customized models also available for additional installation depths

• Configure to your specific application with housing, mullion, rear wall and keyboard housing

• Retaining clamps provide flexibility to install variety of standard operator interface display panels

• NEMA 12/IP 65 housing with a wide range of accessory options

Technical Specifications

Material:

Housing and front frame: extruded aluminum

Frame corner pieces: die-cast zinc

Corner protection pieces: plastic, self extinguishing

Gasket trim strips: extruded flexible plastic

Finish/color:

Housing frame: natural anodized

Corner pieces: powder coated RAL 7035 light grey, textured

Plastic parts: RAL 7024 graphite grey

Protection Ratings

NEMA Type

1 4 4X 12 13

Certifications/Approvals

Listings

* *

UL CUL CSA TÜV

Technical Drawings

Pages . . . . . . . . . . . . . . . . . . . . . . . . .HMI 75-76

Part No.

6380000

NEMA rating

1, 12

H

13.94

Part No.

*Pending.

6380000

Enclosure

Exact outside dimensions inches

W

20.75

D

4.33

H

354 mm

W

527

D

110

Mounting Area

H

12.22

Usable mounting area inches mm

W

19.00

H

310.3

W

482.6

Pendant arms and couplings

Accessories

Aluminum front panel Fixing hardware (panel)

See accessories section 6028000 6050000

Fixing hardware for

O/I displays

6058500

Usable depth inches mm

D

3.94

D

100

Signal pillars

See accessories section

Optipanel Ordering Guide

Optipanel operator housing/keyboard housing CP 6382.009

The Optipanel configuration is built according to the following criteria:

1. Enter the panel/keyboard dimensions

To p

Panel H x W

Supply panel

Manufacturer / model

Panel H x W

Center

Supply panel

Manufacturer/ model

Panel H x W

Bottom

Supply panel

Manufacturer / model

Yes

Yes

Yes

No Cutouts

No Cutouts

No

Cutouts

Yes

Yes

Yes

No

No

No

Keyboard

Panel H x W

Supply panel Yes

Manufacturer/ model

No Cutouts Yes No

Simply copy, complete and fax to Rittal’s Customer Service

Team at (800) 477-4003.

From:

Company

Address

City/State/ZIP

Telephone/Fax

E-mail

Name

Date/Signature

2. Optipanel design codes

After selecting a design number, use the “Design Code

Number” box at bottom to configure your selection.

2.1 Installation depth of operator housing

Installation depth 2"/50 mm

Installation depth 4"/100 mm

Installation depth 6"/150 mm

1

2

3

2.2 Cross mullion

Without

With (one mullion per plate/panel seam)

2.3 Support arm connection

For

Without

Top connection

Bottom connection

Top & Bottom connection

(cover plate included)

Top connection

Bottom connection

Connection top & bottom

(cover plate inclued)

Rear connection enclosure coupling

CP 3525.100

or

CP 6525.600

enclosure coupling

CP 6525.000

or

CP 6525.500

90* enclosure coupling

CP 6526.000

enclosure coupling

CP 6525.100

or

CP 6525.600

0

1

7

4

5

6

2

3

0

1

2.4 Rear Wall

Screw-on

Hinged

2.5 Keyboard housing

Without

Center, installation depth 2"/50 mm

Center, installation depth 4"/100 mm

1

2

Please enter your Design

Code Number:

3. Operator Housing Handles

3.1 For keyboard housings CP 6351.109/6351.209*

Corner handle (1 set) Part No. 6107.000

Bottom

Straight 7U (12

1/4

") handle (1 set) Part No. 6107.100

Horizontal

Straight 19" handle (1 set) Part No. 6107.200

Horizontal

* Handle cannot be located on bottom of operator housing if keyboard is used.

0

1

2

HMI 19 HMI 20

13599-IBG-OpInt-HMI.fpo 8/27/01 10:43 AM Page 22

Optipanel Enclosure Design

1.1 For Operator

Housing CP

6382.009

Indicate the height (H), width (W) and depth (D) or the manufacturer/ type of the HMI device used. Please check for the installation criteria on the first page for further information.

1.2 For

Keyboard

Housing

Indicate the height

(H), width (W) and depth (D) of keyboard/panels or the manufacturer/ type of the keyboard used. Check the installation criteria on the first page for further information.

0

Courtesy of Steven Engineering , Inc.

! 230 Ryan Way, South San Francisco, CA 94080-6370 ! Main Office: (650) 588-9200 ! Outside Local Area: (800) 258-9200 ! www.stevenengineering.com

1

For Technical

Questions/Order

Placement:

Please copy the form on page HMI 20 and enter your

panel dimensions

and the

code

for your special configuration.

Configuration

Example

The following is an example of an

Optipanel configuration with the respective

code number

highlighted.

2

2.1 Operator housing

1

Installation depth 2"/50 mm

3 4

2

2.2 Front design

3

Installation depth 4"/100 mm Installation depth 6"/150 mm

2

Configuration example:

The following is an example of an Optipanel configuration with the respective code number highlighted.

2 1

2.3. Support arm and floor stand connection

0

Without mullion

1

With mullion* With sealing bar*

* Indicate the number of individual sections.

Example: 3 front panels in the operator housing = 2 panel joining points = 2 mullions/sealing bars in the configuration.

Other configurations on request.

2 3

*Includes a cover plate to close unused cutouts.

Without connection Top connection

Bottom connection Connection top and bottom*

CP-L

❑ for enclosure coupling CP 6525.1X0, enclosure mount CP 6525.6X0

Valid only for installation depth (D) of 4 and 6"/100 and 150 mm

HMI 21

With spacer and installation panel on top**

With spacer and installation panel at the bottom**

**Special request only. Extended lead times.

4 5 6

7

Rear connection, at the bottom**

7

Top connection

Bottom connection Connection top and bottom*

Rear connection, on top** for CP 6525.1X0,

CP 6525.6X0

CP-L

❍ for enclosure coupling CP 6525.0X0, enclosure mount CP 6525.5X0, angle coupling CP 6525.0X0

Valid only for installation depth (D) of 6"/150 mm

**Coupling is supplied in RAL

7030.

2 1 2

HMI 22

13599-IBG-OpInt-HMI.fpo 8/27/01 10:43 AM Page 24

Courtesy of Steven Engineering , Inc.

! 230 Ryan Way, South San Francisco, CA 94080-6370 ! Main Office: (650) 588-9200 ! Outside Local Area: (800) 258-9200 ! www.stevenengineering.com

2

2.4. Rear wall

Aluminum, 0.12"/3 mm, natural anodized.

1

Note:

1) For support arm connection on rear side it is only possible to hinge on the opposite side of the support arm connection.

2) Cannot be used with installation depth of 2"/50 mm with keyboard housing.

3) Standard double bit lock insert is exchangeable for lock inserts 41 mm, version C, plastic thumbturn handle and T-handles, version C.

4) In the rear wall hinged model, the maximum installation depth is reduced by 1"/25 mm around lock.

Rear wall screwed-on

2.5. Keyboard housing

Width is independent from operator housing.

The swivel angle is continuously adjustable from 80° to 155°.

0

Rear wall is hinged on the longest side. Viewed from the rear, right or bottom hinged 1)

2) 3) 4) .

1 2

Without keyboard housing With keyboard housing of installation depth 2”/50 mm.

With keyboard housing of installation depth 4”/100 mm.

Additional parts needed:

Installation kit for mounting front plates, operator panels and keyboards into the operator or keyboard housings.

Optipanel configuration example:

The drawings on the right margin highlight the build-up of the Optipanel as various options are added. The photo, to the right, shows the final configuration along with the configuration code below. The configuration of the code number is shown in the following table.

2.1

2.2

2.3

2.4

2.5

2

1

2

1

1

Operator housing, installation depth of 4"/100 mm

With mullion

Support arm on the bottom

Screwed-on rear wall

With keyboard housing, installation depth of 2"/50 mm

You can easily define the dimensions and configuration of an operator housing in just a few steps.

Please provide the following pieces of information for RFQ or order:

1. Part No.: CP 6382.009

2. Dimensions and number of panels/front plates in the operator or keyboard housing, along with drawings for holes/cutouts.

3. Configuration code number

Operator/keyboard housing

Part No.: CP 6382.009

Configuration code number:

2 1 2 1 1

HMI 23

2 1 2 1

Configuration example:

The following is an example of an Optipanel configuration with the respective code number highlighted.

2 1 2 1 1

HMI 24

13599-IBG-OpInt-HMI.fpo 8/27/01 10:43 AM Page 26

Courtesy of Steven Engineering , Inc.

! 230 Ryan Way, South San Francisco, CA 94080-6370 ! Main Office: (650) 588-9200 ! Outside Local Area: (800) 258-9200 ! www.stevenengineering.com

CP Pendant Arm Enclosures

Operator Interface Enclosures

Rittal’s CP Series was developed to meet the requirements of today’s sophisticated control technology including:

• Dense packaging of sensitive components

• Direct accessibility, anywhere on the plant floor

• A high degree of flexibility and ergonomic adaptation to the work place.

Numerous models of operator interface enclosures and two pendant systems combine with an extensive range of support arms, journals, hinges, and connection components to cover virtually any operator interface situation.

The high degree of flexibility and ergonomic design provide unlimited variety for today's diverse work environment.

Configuration

• NEMA 1, 12/IP 54 or 55

• Various configurations for specific applications

• Enclosures can be used with CP-L support arm system (CP-XL can be used w/adaptor CP 6528000)

• Integrated handle grip and front panel

• Designed for small to medium sized

HMI applications

• Enclosures include integrated roof reinforcement

• Aluminum front panel can be removed for easy installation of holes and cutouts

Technical Specifications

Material:

Enclosure, door: 16 ga/1.5 mm sheet steel

Front panel: 14 ga/2 mm aluminum

Handle grips: aluminum

Finish:

Enclosure, door: E-coat primed, painted,

RAL 7035 light grey

Handle: painted, RAL 7030 stone grey or

5018 teal

Protection Ratings

NEMA Type

1 4 4X 12 13

Certifications/Approvals

Listings

UL CUL CSA TÜV

Technical Drawings

Page . . . . . . . . . . . . . . . . . . . . . . . . . . .HMI 79

Enclosure

Part No.

NEMA rating

H inches

W

Control Panel Enclosures/CP 6500 (CP-L) Series

Exact outside dimensions

D H

6540200

6534000

1, 12

1, 12

7.9

7.9

11.8

11.8

6.1

7.1

200

200

6535000

6536000

6537000

6538000

1, 12

1, 12

1, 12

1, 12

11.8

11.8

15.7

15.7

11.8

15.7

11.8

15.7

7.1

7.1

7.1

7.1

300

300

400

400

6531200

6530200

6533200

6532200

1, 12

1, 12

1, 12

1, 12

11.81

14.96

14.96

19.69

14.96

14.96

23.62

19.69

9.21

9.21

9.21

9.21

300

380

380

500 mm

W

300

400

380

380

300

300

300

400

600

500

D

180

180

234

234

155

180

180

180

234

234

5.91

6.11

10.05

10.05

13.99

13.99

9.84

12.99

12.99

17.72

H

Mounting Area

Usable mounting area inches mm

W H W

9.84

8.94

8.94

12.88

8.94

12.88

12.99

12.99

21.65

17.72

355

355

250

330

150

155

255

255

330

450

227

327

330

330

250

227

227

327

550

450

Usable depth inches mm

D D

5.91

6.62

6.62

6.62

6.62

6.62

8.07

8.07

8.07

8.07

168

168

205

205

150

168

168

168

205

205

Part No.

Pendant arms and couplings

Control Panel Enclosures/CP 6500 (CP-L) Series

6540200

6534000

6535000

6536000

6537000

6538000

6531000

6530000

6533000

6532000

See accessories section

See accessories section

See accessories section

See accessories section

See accessories section

See accessories section

See accessories section

See accessories section

See accessories section

See accessories section

Accessories

Signal pillars

See accessories section

See accessories section

See accessories section

See accessories section

See accessories section

See accessories section

See accessories section

See accessories section

See accessories section

See accessories section

Interface box

-

-

2482000

2482000

2482000

2482000

2482000

2482000

2482000

2482000

HMI 25

HMI 26

13599-IBG-OpInt-HMI.fpo 8/27/01 10:43 AM Page 28

Courtesy of Steven Engineering , Inc.

! 230 Ryan Way, South San Francisco, CA 94080-6370 ! Main Office: (650) 588-9200 ! Outside Local Area: (800) 258-9200 ! www.stevenengineering.com

CP Pendant Arm Systems

Operator Interface And Support Arm Systems

Rittal’s CP 6000 (CP-XL) Series pendant arm systems were developed to offer a high degree of flexibility and ergonomic adaptation to the work environment required by today’s sophisticated control technology. A wide variety of enclosures, support arm systems, and accessories combine to satisfy virtually any operator interface need.

Configuration

• Self-tapping screws for easy and secure installation of the pendant arm system

• Support arm cover clips on to support arm for easy access to wiring

• Cable routing before/after installation is easy because one side of the support arm is open

• The enclosed portion of the support arm provides additional shielding

• Torsion resistant extruded aluminum support arms have high load bearing capacity and attractive styling

• Extruded aluminum support arms can be easily cut to a required length

• Enclosures can swivel 350° with couplings

• 90° elbow coupling secures connection between support arm sections and also allows easy cable routing

• Enclosure coupling can be used for top or bottom installation

• Couplings come with either plastic covers or rubber boots which can be removed for easy access to wiring

• Any CP or VIP enclosure can be used

Technical Specifications

Finish/color:

Arm: RAL 7035 light grey

Couplings: RAL 7030 stone grey

Protection Ratings

NEMA Type

1 4 4X 12 13

Certifications/Approvals

Listings

UL CUL CSA TÜV

These Are A Few Examples From A Wide Range Of CP 6000 (CP-XL) Possibilities

Unlimited Variety-CP 6000 (CP-XL)

Rittal's flexible CP 6000 pendant arm system offers many advantages over conventional support arm systems.

With its extensive range of support arms, journals, and couplings, it offers a sophisticated solution for virtually every application.

Today's operator interface control systems guarantee optimal information exchange and user-friendliness, but at the same time, place increasing demands on the interface between the operator and machine.

A: Open and solid support section

1600/360

1300/292

800/180

650/146

550/124

400/90

A + B

B: Solid support section

0

0 1000/39 2000/79

Arm length in mm/inches

3000/118

C: Open support section

C

CP 6110000

CP 6160000

CP 6170000

Static

Load

CP 6180000

CP 6140000

Static

Load

CP 6110000

CP 6160000

CP 6170000 CP 6120000*

Static

Load

CP 6180000

CP 6140000

CP 6110000

CP 6160000

CP 6170000 CP 6120000*

Static

Load

* Only once per system

where possible!

Static

Load

CP 6180000

CP 6140000

Static

Load

HMI 27 HMI 28

13599-IBG-OpInt-HMI.fpo 8/27/01 10:43 AM Page 30

Courtesy of Steven Engineering , Inc.

! 230 Ryan Way, South San Francisco, CA 94080-6370 ! Main Office: (650) 588-9200 ! Outside Local Area: (800) 258-9200 ! www.stevenengineering.com

CP Pendant Arm Systems

Operator Interface And Support Arm Systems

Rittal’s CP-L and CP-S Series pendant arm systems were developed to offer a high degree of flexibility and ergonomic adaptation to the work environment required by today’s sophisticated control technology. A wide variety of enclosures, support arm systems, and accessories combine to satisfy virtually any operator interface need.

Configuration

• Self-tapping screws for easy and secure installation of the pendant arm system

• Torsion resistant extruded aluminum support arms have high load bearing capacity and attractive styling

• Extruded aluminum support arms can be easily cut to a required length

• Enclosures can swivel 350° with couplings

• 90° elbow coupling secures connection between support arm sections and also allows easy cable routing

• Enclosure coupling can be used for top bottom installation

• Couplings come with plastic covers which can be removed for easy access to wiring

• Any CP, VIP or Optipanel enclosure can be used

Technical Specifications

Finish/color:

Arm: RAL 7035 light grey

Couplings: RAL 7030 stone grey

Protection Ratings

NEMA Type

1 4 4X 12 13

Certifications/Approvals

Listings

UL CUL CSA TÜV

CP-S Support Arm System

Mounting Examples

CP-S Support Arm System

NEW!

CP-S Support Arm System in combination with CP-L

CP-L

CP-L

CP-S

CP-S

System Benefits

• Compact support arm system for small operator enclosures.

• Easy and fast mounting through set screws on the support arm components.

• The horizontal connection to the larger CP-L support arm system allows longer extension support arms.

• 2 color combinations enable an individual design adjustment to complement the Optipanel (RAL 9006 and RAL 7024) or for CP enclosures in sheet steel, painted (RAL 7035 and RAL

7030) or combined (RAL

7035/RAL 7024).

• The movable components have a maintenance-free sliding bearing and the angle rotation can be limited.

Angle adaptor 90°, the connection to the support arm system CP-L

For connection to:

• Intermediate hinge

• Wall-mounted hinge

• Top-mounted hinge

• Wall/base mounting

The permitted load for vertical construction is 800 N (179.8

lbf), 80kg (176.4 lbs) total weight. The permitted load corresponds to the CP-L load diagram.

Extensive Versatility-CP 6500 (CP-L)

The support arm system CP-L is designed for small and medium-sized command panels. It offers a whole range of connection and hinged parts, and hence a large number of possible applications.

This ensures optimum operation at the interface between man and machine. In other words, the

CP-L support arm system provides perfect back-up for optimum information exchange and user friendly handling of graphical interactive control systems.

Permissable load depending on system configuration

Only one CP 6523 swivel hinge per system

800/

179

700/

157

600/

134

500/

112

400/

89

300/

67

200/

44

100/

22

0

0 200/

7.87

400/

15.75

600/

23.62

800/

31.50

Arm length mm/inches

1000/

39.37

1200/

47.24

1400/

55.12

1600/

63.00

1800/

70.87

2000/

78.74

A

B

C

HMI 29

A. System Configuration

(without hinge)

CP 6527

CP 6524

CP 6520

B. System Configuration

(with one hinge)

CP 6525

CP 6527

CP 6525

CP 6526

CP 6523

CP 6520

CP 6522

CP 6527

CP 6524

CP 6525

CP 6527

CP 6526

CP 6525

CP 6521

C. System Configuration

(with two hinges)

CP 6522

CP 6523

CP 6523

CP 6521

CP 6527

CP 6524

CP 6525

CP 6527

CP 6525

CP 6526

These Are A Few Examples From A Wide Range Of CP 6500 (CP-L) Possibilities

HMI 30

13599-IBG-OpInt-HMI.fpo 8/27/01 10:43 AM Page 32

Courtesy of Steven Engineering , Inc.

! 230 Ryan Way, South San Francisco, CA 94080-6370 ! Main Office: (650) 588-9200 ! Outside Local Area: (800) 258-9200 ! www.stevenengineering.com

CP-Vertical Pendant Arm Systems

Smart HMI Solutions

Rittal’s new operator-driven CP-Vertical pendant arm systems allow any operator to comfortably use a plant floor operator interface device, regardless of the operator’s height. To adjust height, the operator merely activates a release mechanism and the interface can be effortlessly repositioned at a new height or moved out of the way. The pendant arm uses a gas spring counterbalancing system that can be easily user calibrated to each system’s load that assists in moving and locking the interface device in the desired vertical position.

What‘s more is, this pendant arm system can be easily incorporated with the new Optipanel enclosures that are specifically designed for flat panel displays. The CP-V System is also ideal for all of Rittal’s Command Panel (CP) enclosures.

Part No.

9967987

9967988

9967989

9967993

9967994

9967995

9967996

9967997

9967998

9967999

9968000

9968001

Pendant Arm System

Description

Post top/CP-V

Post top/CP-VL

Post top/CP-VXL

Wallmount/CP-V

Wallmount/CP-VL

Wallmount/CP-VXL

Machine top/CP-V

Machine top/CP-VL

Machine top/CP-VXL

Universal mount/CP-V

Universal mount/CP-VL

Universal mount/CP-VXL

Max. load

100 lbs.

75 lbs.

50 lbs.

100 lbs.

75 lbs.

50 lbs.

100 lbs.

75 lbs.

50 lbs.

100 lbs.

75 lbs.

50 lbs.

Part No.

9968002

9968003

9968004

9968005

9968006

9968007

9968008

9968009

9968010

9968011

9968012

9968013

9968014

9968015

9968016

1 Must choose one release handle per arm.

2 W = overall enclosure width.

Accessories

Description

6" Horizontal extension

12" Horizontal extension

18" Horizontal extension

24" Horizontal extension

18" Jointed extension arm

24" Jointed extension arm

4" Vertical extension piece

8" Vertical extension piece

12" Vertical extension piece

36" Floor post

74" Floor post

79” Floor post

Release handle W < 15

1 2

Release handle W > 15

1 2

Release handle for VIP wide bezel

1 2

HMI 31

Vertical travel T

13"

23"

30"

13"

23"

30"

13"

23"

30"

13"

23"

30"

Configuration

Sizes

CP-V 5" H x 3" W x 26" L

CP-VL 5" H x 3" W x 31" L

CP-VXL 5" H x 3" W x 39" L

Vertical travel

CP-V 13"

CP-VL 23"

CP-VXL 30"

• Adjusts to viewing height of each operator with simple motion

• Counterbalance can be adjusted by user for loads up to 100 lbs (depending on arm)

• 13", 23", or 30" of vertical adjustment

• Locks and unlocks with a convenient release mechanism

• Swivels at both ends

• Optional extensions and floor posts

• NEMA Type 4, 12 sealed cable passageway protects wiring

• Wallmount, machine top, post top or universal mounting options

• Universal mount incorporates the ability to post, wall, or machine mount

CP-Vertical arm

• All arms can be easily reconfigured for inverted applications

Note:

A release handle mechanism must be ordered for each arm

Technical Specifications

Material:

• Aluminum

Finish/color:

powder painted RAL 7035 light grey

Each CP-Vertical Pendant Arm System Will Include The

Following:

• CP-Vertical pendant arm that can be counterbalanced by the user based on load rating

• Mounting method (Post, Wallmount, Machine, Universal) will be attached to pendant arm

• A 4’ release cable will be included

• Conversion wrench and instructions

• Hardware to attach enclosure to CP-Vertical arm

Note: Hardware to attach the CP-Vertical pendant arm to mounting surface is not provided.

Below Is A Step-By-Step Guide To Selecting A

CP-Vertical Pendant Arm System:

1) Determine Maximum Load:*

Maximum load = Weight of enclosure (lbs)

+ total weight of all components mounted ON or INSIDE of enclosure

Maximum load (lbs) =

* Load = Weight of enclosure + total weight of all components mounted inside enclosure

Protection Ratings

NEMA Type

1 4 4X 12 13

Certifications/Approvals

Listings

UL CUL CSA TÜV

Technical Drawings

Pages . . . . . . . . . . . . . . . . . . . . . . . . .HMI 77-78

2) Determine Proper CP-Vertical Pendent Arm

Based On Load:

Select a vertical travel based on your maximum load calculation from above.

Maximum Load

Range (+0%)

0 to 50 lbs

51 to 75 lbs

76 to 100 lbs

CP-V

13" Vertical

Travel

Yes

Yes

Yes

CP-VL

23" Vertical

Travel

Yes

Yes

No

CP-VXL

30" Vertical

Travel

Yes

No

No

3) Determine Mounting Method:

Based on the CP-Vertical Pendant Arm you selected (i.e.

CP-V, CP-VL, CP-VXL) in step #2, select a mounting method that best fits your application.

Mounting method

Post top

Wallmount

Machine top

Universal*

CP-V

13" Vertical

Travel

Part No.

9967987

9967993

9967996

9967999

CP-VL

23" Vertical

Travel

Part No.

9967988

9967994

9967997

9968000

CP-VXL

30" Vertical

Travel

Part No.

9967989

9967995

9967998

9968001

HMI 32

13599-IBG-OpInt-HMI.fpo 8/27/01 10:43 AM Page 34

CP 6000 (CP-XL) Accessories

CP 6000 Support Arm

The basic component of a CP 6000 pendant arm system. Connection components are attached with self-tapping screws and make combinations of any desired length possible.

Configuration:

bend- and torsion-resistant extruded aluminum complete with clip-on cover. Available in three different lengths.

Color:

RAL 7035 light grey

Weight:

support arm: 6.0 lbs/ft/9.05

kg/m

Cover:

.3 lbs/ft/.45 kg/m.

Courtesy of Steven Engineering , Inc.

! 230 Ryan Way, South San Francisco, CA 94080-6370 ! Main Office: (650) 588-9200 ! Outside Local Area: (800) 258-9200 ! www.stevenengineering.com

Length (inches/mm)

19.7/500

39.4/1000

78.7/2000

80

CP 6000 Support Arm

Packs of

1

1

1

18.5

10.6

Part No.

6050000

6100000

6200000

Tilting Adaptor 25º/60º

Installs between enclosure and CP

6130 enclosure coupling; tilts 25° or 60°.

Material:

zinc diecast; comes with gaskets and installation hardware.

Color:

RAL 7030 stone grey.

CP 6000 Support

Arm, Solid

The solution for higher weight loads.

Approximately 20% more loading capacity than the clip-on cover support arm version.

Color:

RAL 7035 light grey

Weight:

23 lbs/10.3 kg

Adjustment Shim

Allows subsequent adjustment of CP support arms.

Material:

sheet steel, zinc coated, yellow chromate.

10º Tilting Adaptor

Tilts enclosure for increased user-friendliness; installed between housing and enclosure or 90° arm coupling.

Material:

zinc diecast; comes with gaskets and installation hardware.

Color:

RAL 7030 stone grey.

54

64

80

Length (inches/mm)

19.7/500

39.4/1000

70.7/2000

Solid CP 6000 Support Arm

Packs of

1

1

1

Part No.

6050500

6100500

6200500

Adjustment shim

Adjustment Shim

Packs of

10

Part No.

6205000

Weight

2.6 lbs/1.2 kg

Ø 160

10° Tilting Adaptor

Packs of

1

10

Part No.

6023000

98

Fixed Enclosure Coupling

For fixed attachment of the enclosure in conjunction with 10° tilting adaptor

(CP 6023000) and 25°/60° tilting adaptor (CP 6150000).

Configuration:

Die-cast zinc; including gasket and installation hardware. Not suitable for use as a base point for a support arm system.

Color:

RAL 7030 stone grey.

Fixed Enclosure Coupling

For rigid top or bottom mounting of enclosures to vertical support arms.

Configuration:

zinc die-cast; includes gaskets and installation hardware.

Not suitable for use as base bracket for a support arm system.

Color:

RAL 7030 stone grey.

Weight

8.4 lbs/3.8 kg

160

Tilting Adaptor 25°/60°

Packs of

1

Cover

A

210

25

°

60

°

5

°

7

100

112

45

°

45

°

Part No.

6150000

75.5

5

°

210

25 °

60

°

164.5

Weight

2.4 lbs/1.1 kg

180

112

64

Fixed Enclosure Coupling

Packs of

1

22

Part No.

6130600

54

100

25

Weight

3.1 lbs/1.4 kg

Enclosure Coupling, Fixed

Packs of

1

64

25

Part No.

6130500

54

130

22

180

HMI 33 HMI 34

13599-IBG-OpInt-HMI.fpo 8/27/01 10:43 AM Page 36

Courtesy of Steven Engineering , Inc.

! 230 Ryan Way, South San Francisco, CA 94080-6370 ! Main Office: (650) 588-9200 ! Outside Local Area: (800) 258-9200 ! www.stevenengineering.com

Enclosure Coupling

For top or bottom installation of enclosures to vertical support arms.

Material:

zinc diecast; enclosure rotates infinitely through 350˚ and adjustable; maintenance-free bearing; includes gaskets and installation hardware. Not to be used as a support arm base bracket.

Color:

RAL 7030 stone grey.

50 89

Ø100

Ø

112

45

°

45

°

180

M6

Weight

7.7 lbs/3.5 kg

Enclosure Coupling

Packs of

1

45

°

45

°

Part No.

6130000

Ø112

0 0

Ø 1

Ø100

7

112

M6

45

°

Ø180

45

°

7

45

°

45

°

Ø100

Ø120

Weight

12.1 lbs/5.5 kg

90˚ Enclosure Coupling

For top or bottom installation of enclosures to horizontal support arms without having to install an additional vertical support arm.

Material:

spheroidal graphite iron and zinc diecast; rotates 180˚ and can be locked in place; maintenance-free bearing; plastic cover; gaskets and installation hardware. Not to be used as a support arm base bracket.

Color:

RAL 7030 stone grey.

90° Enclosure Coupling

Packs of

1

Part No.

6040000

90˚ Arm Coupling

Connects vertical support arms to horizontal support arms.

Material:

spheroidal graphite iron with protective plastic cover; gaskets and installation hardware.

Color:

RAL 7030 stone grey.

US Patent No. 4,997,155

German Patent No. 38 05 422

European Patent No. 0 330 027 valid for FR, IT

Weight

4.2 lbs/1.9 kg

90° Arm Coupling

Packs of

1

45

°

Part No.

6140000

86

Intermediate Hinge

Connects horizontal suspension arms.

Material:

spheroidal graphite iron; rotates 180°, includes bellows with zip fastener for easy access to cable duct; gaskets, and installation hardware.

Color:

RAL 7030 stone grey.

US Patent No. 4,998,702

German Patent No. 38 05 424

European Patent No. 0 330 029 valid for FR, GB, IT

Wall/Base Bracket

Allows rigid mounting of the pendant arm system to vertical or horizontal surfaces.

Material:

spheroidal graphite iron, includes gaskets and installation hardware.

Color:

RAL 7030 stone grey.

Vertical Hinge

For installation of a swiveling pendant arm system to vertical surfaces.

Material:

spheroidal graphite iron; rotates 180°, includes bellows, gaskets, and installation hardware.

Color:

RAL 7030 stone grey.

90˚ Arm Coupling

(For Inverted Mounting)

Allows vertical support arm to be directed upwards from a lower, horizontal support arm at floor level which ensures trouble-free cable routing.

Material:

spheroidal graphite iron with protective plastic cover; gaskets and installation hardware.

Color:

RAL 7030 stone grey.

50

10

Weight

7.0 lbs/3.2 kg

10

90° Arm Coupling

Packs of

1

Part No.

6180000

80

80

Weight

13.4 lbs/6.1 kg

275

Intermediate Hinge

Packs of

1

Part No.

6120000

80

50

Weight

7.9 lbs/3.6 kg

7

1

Weight

18.5 lbs/8.4 kg

130

70

50

Wall/Base Bracket

Packs of

1

70

37

45

°

40

50

140

165

Vertical Hinge

Packs of

1

45

°

120

Part No.

6160000

33 55

Part No.

6110000

ca.28

140

165

220

70

140

80

"A"

Horizontal Hinge

For installation of a swiveling pendant arm system to horizontal surfaces.

Material:

steel and cast iron with plastic cover; maintenance free bearing, rotates 350°, with safety stop; includes gaskets and installation hardware.

Note: Not to be used as an enclosure coupling.

Color:

RAL 7030 stone grey.

168

50

Weight

24.2 lbs/11.0 kg

50

33

60.5

A

Horizontal Hinge

Packs of

1

View A

120

Part No.

6170000

14

175

45

°

8

18

45

°

86

Ø 100

Ø 145

HMI 35 HMI 36

13599-IBG-OpInt-HMI.fpo 8/27/01 10:43 AM Page 38

Rotational Limiter For

CP-XL

Suitable for:

• Wall-mounted hinge CP 6110.000

• Intermediate hinge CP 6120.000

Configuration:

2 steel-washer, perforated, zinc-coated, chromated, including 3 cheese head screws for fixing.

Courtesy of Steven Engineering , Inc.

! 230 Ryan Way, South San Francisco, CA 94080-6370 ! Main Office: (650) 588-9200 ! Outside Local Area: (800) 258-9200 ! www.stevenengineering.com

PU

1 set

Rotational Limiter For CP-XL

Part No.

6110100

Adjustable swivel range:

45

¡

90

¡

45¡

45¡

45

¡

90

¡

135

¡

90¡

135

¡

Tilt Adaptor +/-45°

Adjustable

For flexible adjustment for optimum viewing angle of flat screen LCD displays. Can be mounted on pendant arm with a CP 6525 enclosure coupling or a CP 6526 90° enclosure coupling.

Enclosure Coupling, Fixed

For fixed bottom mounting of enclosure to vertical support arm.

Configuration:

zinc die-cast; includes gaskets and installation hardware. Cannot be used as a support base bracket.

Color:

RAL 7030 stone grey.

CP 6500 (CP-L) Accessories

CP 6500 Support Arm

The basic component of the pendant arm system.

Material:

Bend- and torsion-resistant extruded aluminum. Integrated holes for self-tapping screws make combinations up to any desired length possible.

Color:

RAL 7035 light grey

Weight:

3.16 lbs/ft/4.7 kg/m.

Length (inches/mm)

19.7/500

39.4/1000

78.7/2000

CP 6500 Support Arm

Packs of

1

1

1

8.0

Support Arm Angle 90°,

CP-L

The alternative for the assembling of compact support arm systems enables simplified mounting and improves the aesthetics, in particular in connection with the wall/ bottom mounting, small (CP 6520.5X0).

The support arm components are mounted on the angle through self-tapping screws, which means that the support profile can be cut to any required length.

Configuration:

Torsionally stiff extruded aluminum section of high bending resistance.

Weight:

6.61 lbs/3 kg.

34.0

50.0

Support Arm Angle 90°, CP-L

Color RAL

7035 (light grey)

9006 (white-aluminum)

Part No.

6519000

6519010

Available November 2001.

392.5

350

(265)

50

34

Part No.

6511000

6513000

6515000

Enclosure Coupling,

Rotating

For top or bottom installation of enclosure to vertical support arm.

Configuration:

maximum rotation

350°. Not to be used as a support arm.

Color:

RAL 7030 stone grey.

Connection Adaptor VIP

6000 on Support Arm

System CP-XL

For connections between VIP 6000

Command Panels with support arm connection CP-L and support arm system CP-XL.

Design:

Cast aluminum, including seal and assembly parts.

Color:

RAL 7030 stone grey.

Weight

2.2 lbs/1.0 kg

Ø 130

Ø 82

Ø 70

M6

+/-45° Tilt Adaptor

Packs of

1

82

45

°

Part No.

6529000

7

Installation cutout

82

Weight

1.8 lbs/0.8 kg

Enclosure Coupling, Fixed

Packs of

1

34

28

Part No.

6525500

7

Installation cutout

Weight

3.3 lbs/1.5 kg

50

Enclosure Coupling

Packs of

1

Mounting cutout

Ø

7

Ø

82

Ø130

Weight

1.5 lbs/0.7 kg

Connection Adaptor

Packs of

1

23

Part No.

6525000

Part No.

6528500

Ø 82

Ø 130

Ø 160

45

°

5

10º Tilting Adaptor

Tilts enclosure for increased operator friendliness; installed between housing and enclosure or 90° arm coupling.

Material:

cast zinc; comes with gaskets and installation hardware.

Color:

RAL 7030 stone grey.

Weight

1.3 lbs/.6 kg

10° Tilting Adaptor

Packs of

1

Part No.

6527000

90º Enclosure Coupling

For top or bottom installation of enclosure to vertical support arm.

Configuration:

maximum rotation

350°. Not to be used as a base mounting bracket.

Color:

RAL 7030 stone grey.

Weight

3.3 lbs/1.5 kg

90° Enclosure Coupling

Packs of

1

Ø

7

Ø

82

Installation cutout

Part No.

6526000

50

Ø70

Ø130

HMI 37 HMI 38

13599-IBG-OpInt-HMI.fpo 8/27/01 10:43 AM Page 40

90º Arm Elbow

Connects horizontal and vertical support arms.

Color:

RAL 7030 stone grey.

Courtesy of Steven Engineering , Inc.

! 230 Ryan Way, South San Francisco, CA 94080-6370 ! Main Office: (650) 588-9200 ! Outside Local Area: (800) 258-9200 ! www.stevenengineering.com

Weight

1.1 lbs/.5 kg

A

45

°

90° Arm Elbow

Packs of

1

View A

Part No.

6524000

Wall/Floor Mount, Small

For fixed mounting of support arm systems on vertical and horizontal surfaces. Especially well suited for assembly of compact support arm systems with cable entry from the inside.

Description:

aluminum die-cast, including gasketing and self-threading screws for CP-L support arm installation.

Color:

RAL 7030 stone grey.

Note:

standard screws may be used for the assembly of walls and floors.

Intermediate Hinge

Connects horizontal suspension arms.

Configuration:

maximum rotation

350°.

Color:

RAL 7030 stone grey.

62.5

47.5

126

Weight

5.5 lbs/2.5 kg

A

Intermediate Hinge

Packs of

1

View A

Part No.

6523000

116

126

Wall/Base Mounting

Bracket

For rigid installation of a stationary suspension arm system to a vertical or horizontal mounting surface.

Color:

RAL 7030 stone grey.

Weight

3.5 lbs/1.6 kg

Removable plate

Wall/Base Mounting Bracket

Packs of

1

Part No.

6520000

Mounting cutout

Ø 11/ M 10

Vertical Hinge

For installation of a swiveling support arm system to a vertical mounting surface.

Configuration:

maximum rotation

350°, can be locked in place.

Color:

RAL 7030 stone grey.

22.5

°

115

Removable plate

24

115

Weight

6.2 lbs/2.8 kg

A

Vertical Hinge

Packs of

1

121

VIEW A

MOUNTING

CUTOUT

Ø11/M10

126

60

35 – 65

Part No.

6521000

90° Angle Adaptor,

(6000 to 6500) (CP-XL to CP-L)

A coupling between

• horizontal support rail CP-XL and

• vertical support rail CP-L when the configuration is chosen for standard or aesthetic reasons.

Description:

aluminum die-cast, including gaskets and self-threading screws for mounting of CP-L/CP-XL support arm.

Color:

RAL 7030 stone grey.

Mounting Component for

Support Arm System

For attaching a signal pillar with connection component for conduit mounting onto support arm system

CP-L. To fit angle piece CP 6524.000

and angle coupling CP 6526.000

Design:

sheet steel

Color:

RAL 7030 stone grey.

Connection Adaptor

Makes following, interchangeable connection options possible.

• Connect CP 6000 enclosure to CP

6500 support arm system.

• Connect CP 6500 enclosures to CP

6000 support arm system.

Material:

cast aluminum; powder painted, RAL 7030 stone grey.

Horizontal Hinge

For installation of a swiveling support arm to a horizontal mounting surface.

Ceiling installation possible.

Configuration:

maximum rotation

350° not to be used as a coupling for enclosures.

Color:

RAL 7030 stone grey.

Weight

5.5 lbs/2.5 kg

A

60

Horizontal Hinge

Packs of

1

58 View A

Part No.

6522000

Ø11/M10

MOUNTING

CUTOUT

Ø11

Ø46

Weight

1.3 lbs/0.6 kg

11

18

34

110

51

Wall/Floor Mount, Small

Packs of

1

Installation cutout fl 11

0

Part No.

6520500

fl 11/M10 max. 52

Weight

3.3 lbs/1.5 kg

90° Angle Adaptor, CP-XL to CP-L

Packs of

1

Part No.

6528100

57

96

49

34

49

Remove lid

Mounting Component

Mounting component

For support arm system CP-L

Part No.

2375000

Weight

1.1 lbs/.5 kg

45

°

20

5

Connection Adaptor

Packs of

1

7

Part No.

6528000

HMI 39 HMI 40

13599-IBG-OpInt-HMI.fpo 8/27/01 10:43 AM Page 42

Connection Housing CP-L

For connection on the rear side of a command panel onto support arm system CP-L via:

• Enclosure mounting 4.72 x 2.56"/

120 x 65 mm (CP 6525.6X0)

• Enclosure coupling 4.72 x 2.56"/

120 x 65 mm (CP 6525.1X0)

• Tilting adaptor 10° 4.72 x 2.56"/

120 x 65 mm (CP 6527.1X0)

The removable cover enables simplified cable entry.

Configuration:

Cast-aluminum, including seal and assembly parts for mounting on the enclosure as well as two cable ties.

Weight:

1.32 lbs/ 0.6 kg.

Courtesy of Steven Engineering , Inc.

! 230 Ryan Way, South San Francisco, CA 94080-6370 ! Main Office: (650) 588-9200 ! Outside Local Area: (800) 258-9200 ! www.stevenengineering.com

Connection Housing CP-L

Color RAL

7030 (stone grey)

7024 (graphite grey)

Available October 2001

Part No.

6508000

6508010

35

75

40

49

Optipanel Support Plate

For mounting on the enclosure profile. This enables the rear wall or door to be removed. This ensures easy access in case of service.

Configuration:

Cast-aluminum, including seal and installation hardware.

Mounting possibilities

1. For retrofitting* on Optipanel:

In combination with the required support plate (see above) the connection console will be screwed directly on the Optipanel enclosure profile. This ensures solid connection and enables to remove the rear wall and rear door.

* The supply includes the connection housing and support plate as well as the rear wall and rear door with respective cutout, if they are selected per design code number.

2. For other enclosures for example:

• Junction boxes

• Cast aluminum enclosures:

The connection console can be mounted: a) Directly and flush with the enclosure edge b) With spacer plate (available on request) on the rear wall of the enclosure. A reinforcement of the rear wall has to be tested for each individual case.

PU

1 set

Available October 2001

Optipanel Support Plate

Part No.

6508100

Support arm component

CP-L 4.72 x 2.56”/120 x 65 mm

Support arm component

CP-L 4.72 x 2.56”/120 x 65 mm

Connection housing

Support plate (internal)

Connection housing

Support arm component

CP-L 4.72 x 2.56”/120 x 65 mm

Connection housing

Spacer plate

Mounting cutout

6

60

7

Connection Plate

with reinforcement plate

• Enables simplified attachment of the Command Panel on the support arm or pedestal.

• Easily attached from outside.

• More space for cable entry and clamping angle.

For mounting of:

• VIP 6000 1)

• Optipanel 2)

• Sheet steel – Command Panel 3) on (see Table A)

1) From width of front plate 10.43”/

265 mm. The CP-XL configuration not in connection with installation depth 6.10”/155 mm and

11.61”/295 mm.

2) From width of front plate 11.61”/

295 mm and installation depth

5.91”/150 mm.

3) Attachment surface, minimum

W x D = 11.81” x 5.32”/300 mm x 135 mm (e.g. operator door enclosure).

Note:

The rectangle support arm cutout may be installed on request.

Material:

Connection plate; cast aluminum.

Configuration:

Including seal/ installation hardware.

Mounting cutout CP-L/CP-XL

180

165

146

Alternatively fl W

* fl 7

With support arm connection

CP-XL

CP-L

CP-L

Color RAL

7030

7030

7024

Connection Plate

Weight lbs

1.76

1.54

1.54

kg

0.8

0.7

0.7

Part No.

6528300

6528200

6528210

Support arm components

Enclosure mounting

Enclosure mounting

Angle coupling

Tilt adaptor 10°

Tilt adaptor +/- 45°

Table A

CP-L

CP

65255X0

CP

65250X0

CP

65260X0

CP

65270X0

CP

65290X0

CP-XL

CP

6130600

CP

6130000

CP

6040000

-

-

Table B

VIP 6000

VIP 6000

Optipanel

Sheet metal enclosures inches

Installation depth

6.10 to 7.28

mm

155 to 185

11.61 to 17.24

5.91

-

295 to 438

150

-

A

32

34

*

B C

81 30.5

174.5

81 173

65.5

86

30.5

*

Available October 2001

* Drillings/cutouts have to be located in the center of the reinforcement plate of the enclosure.

CP-L

200

145

CP-XL

200

145 fl 0.22"/0.39" deep fl 5.5/10 mm deep fl 0.22"/0.39" deep fl 5.5/10 mm deep

Outdoor edge of enclosure rear side

Ø 0.23”/6 mm only for sheet metal enclosures to fix the reinforcement plate.

129

182.5

15.5

129

182.5

15.5

70

82

134

180

100

112

180

90

6

30

HMI 41 HMI 42

13599-IBG-OpInt-HMI.fpo 8/27/01 10:43 AM Page 44

CP-S Accessories

Courtesy of Steven Engineering , Inc.

! 230 Ryan Way, South San Francisco, CA 94080-6370 ! Main Office: (650) 588-9200 ! Outside Local Area: (800) 258-9200 ! www.stevenengineering.com

Angle Adaptor 90°,

CP-L To CP-S

For the connection between

• Horizontal CP-L support profile and

• Vertical CP-S support profile.

Angle adaptor can be on top or bottom, if system is

• Suspended or

• Supporting.

The removable cover enables simplified cable entry.

Configuration:

Cast aluminum, including seal and self-tapping screws for CP-L or set screws for

CP-S support profile mounting.

Weight:

1.5 lbs/ 0.7 kg.

Color RAL

7030 (stone gray)

7024 (graphite gray)

Available November 2001

Angle Adaptor 90°

75 fl 40

71

Support Profile CP-S

For assembling a support arm system.

The connection components are mounted on the support profile through set screws, which means that the support profile can be cut to any required length.

Configuration:

Steel tube, outer diameter 1.9"/48.3 mm, wall thickness 0.15"/4 mm.

Weight:

9.7 lbs/ft (4.4 kg/m).

Length inches

19.7

19.7

39.4

39.4

Available November 2001.

mm

500

500

1000

1000

Support Profile CP-S

Color RAL

7035 (light grey)

9006 (white-aluminum)

7035 (light grey)

9006 (white-aluminum)

48.3

Part No.

6501080

6501090

Part No.

6501000

6501010

6501020

6501030

Enclosure/Base Bracket

CP-S, Fixed

For rigid mounting:

• Of the enclosures onto the support arm,

• Of the support arms on a vertical or horizontal mounting surface

(fasteners are internal).*

Configuration:

Die-cast zinc, including seal and two set screws for the support profile.

* Maximum load capacity 400 N

(89.9 lbf), 88.2 lbs/40kg total weight.

Weight:

2.65 lbs/1.2 kg.

Enclosure/Base Bracket CP-S, Fixed

Color RAL

7030 (stone grey)

7024 (graphite grey)

Part No.

6501060

6501070

Available November 2001.

68

58 fl 48.8

fl 65

45¡

90 fl 40

Enclosure Coupling CP-S,

Rotating

For swivel mounting of the enclosure to the CP-S support arm system.

Two mounting cutout options are possible a) Circular pattern b) Rectangular pattern

Configuration:

Die-cast zinc, including seal and assembly parts.

Rotation range approx. 350°, lockable. Not suitable for use as a base point for a support arm system.

Weight:

4.63 lbs/2.1kg.

Enclosure Coupling CP-S, Rotating

Color RAL

7030 (stone grey)

7024 (graphite grey)

Part No.

6501040

6501050

Available November 2001.

68

58 fl 65

45¡

90 fl 40

4

Wall/Base Mounting

Bracket CP-S

For rigid mounting of the support arm system on vertical or horizontal surfaces.

Configuration:

Cast aluminum, including seal and two set screws for the support profile.

Weight:

1.32 lbs/0.6 kg.

Wall/Base Mounting Bracket CP-S

Color RAL

7030 (stone grey)

7024 (graphite grey)

Part No.

6501100

6501110

Available November 2001.

9 fl 48.8

fl 40

73

115

Pedestal Accessories

Pedestal Base, Small

With reinforcement bracket for the installation of support arm profile

CP-L:

• rear with one hole for a standard

M20 cable conduit connection.

• top with two holes (grommets included) for bottom floor mounting cross rail.

Mounting cutout options

a)

7

2

5

45

¡ fl 65

45¡

13.5

b) fl 45

58

Possible for Optipanel with installation depth 4"/100 mm. Please indicate under 2.3 (see Optipanel ordering form) additional to the construction code number 1 to 3 the letter S.

same as cutout a), however without keyhole.

fl 45 fl 65 45¡

Small Pedestal Base

PU

1

Note:

standard M8 screws are acceptable for bottom mounting.

Material:

sheet steel 3/22"/2.5 mm

Color:

RAL 7035 light grey.

Part No.

6143200

HMI 43

HMI 44

13599-IBG-OpInt-HMI.fpo 8/27/01 10:43 AM Page 46

Courtesy of Steven Engineering , Inc.

! 230 Ryan Way, South San Francisco, CA 94080-6370 ! Main Office: (650) 588-9200 ! Outside Local Area: (800) 258-9200 ! www.stevenengineering.com

Enclosure Flange CP-L

For the rigid installation of:

• KL enclosures 1515.210 (HWD

150 x 360 x 80 mm)

• mounted inside as reinforcement plate for all appropriately sized enclosures (also E-boxes and compact AE enclosures) in conjunction with:

- enclosure coupling CP 6525000

- enclosure mount CP 6525500

- tilted adaptor CP 6526000 to support arm CP-L.

Mobile Pedestal For

CP 6000 And CP 6500

Offers operator friendliness and installation flexibility for CP operator enclosure applications. All CP and similar operator enclosures can be mounted on the special coupling plate of the CP 6136.000 mobile pedestal. Large casters facilitate easy movement, even on uneven floors; the front casters feature brakes.

Pedestal/Platform

Provides a fixed, mobile pedestal mounting solution.

Standard configuration includes:

• knockouts for PG strain connector inserts

• integrated cable collecting angle

• knockout for concealed mounting of cable conduit adapters up to PG

36 or M 50.

With the following accessories:

• double wheel casters 7495.000

• leveling feet 4612.000

Pedestal For

Command Panel

Enclosure may be mounted via

• enclosure coupling CP 6525.500

(rigid).

.

• enclosure coupling CP 6525.000

(swivel).

Technical details:

Cast feet with holes for floor mounting.

Enclosure Flange CP-L

PU

1

With installation materials for enclosure and support arm plus

2 gaskets.

Material:

sheet steel

Color:

RAL 7035 light grey.

Part No.

6143210

Mobile Pedestal For CP 6000 And CP 6500

Pedestal with mounting plate for CP 6500 for CP 6000

Part No.

6136500

6136000

The base allows for easy cable entry while cables can be routed through the support pillar.

Configuration:

mobile base, with

4 casters, including two with integral brakes; support pillar.

Only for CP 6136.000: special coupling; installation hardware.

Color:

RAL 7030/7035 grey

Casters:

RAL 9005 black.

For support arm

CP 6500

CP 6000

• wallmounting bracket KL

1580.000 or 1590.000 the pedestal can be customized for any environment.

Material:

sheet steel

Finish:

powder painted: RAL

7030 stone grey or RAL 7035 light grey textured

Pedestal/Platform

Color RAL

7035

7035

Part No.

6137535

6137035

Configuration:

pedestal/floor plate with integrated reinforcement and installation cutout for

CP 6000 or CP 6500 support arms; includes installation hardware for support arms.

inches

39.37

39.37

Height

Pedestal For Command Panel

mm

1000

1000

Cable conduit adaptor without with

Support tubes:

• oval, twin-walled cover, easily opened from the outside. Cables may then be routed behind the cover for protection.

Part No.

6141000

6141100

Base Mount For Pedestal

For CP 6141 Enclosure

For secure mounting at the installation site.

• bracket is mounted to the pedestal with four countersunk screws in the existing threaded holes (M 12).

• bracket is mounted to the floor via through-holes (Ø11 mm), depending on the construction of the floor, with commercially available screws and dowels.

Packs of

1 set

Base Mount For Pedestal

Part No.

6147000

Configuration:

4 base mounting brackets, 4 countersunk screws,

M 12.

Twin Casters For CP

6141000/100 Enclosures

For mobile use, easy installation. For:

• pedestals CP 6141.000 and CP

6141.100.

• pedestal base plate CP

6137.030—CP 6137.535.

Load capacity per castor:

165 lbs/75 kg static load 2 twin casters with brake.

Foot Rest For

CP 6141000/100

Packs of 2 connector pieces, 1 round tube.

Trim Panel For

CP 6141000/100

May be installed front and rear.

Optipanel Accessories

Cover Plate

To cover an unused support arm cutout.

Material:

sheet steel, clear chromate.

Configuration:

cover plate with gasket, including installation material.

10° Tiliting Adaptor CP-L

For installation between:

• enclosure coupling CP 6525.100 or

• enclosure coupling CP 6525.600

and housing.

Configuration:

zinc die-cast; includes gasketing and installation materials. Not designed as a base for a support arm system.

Color:

RAL 7030 stone grey.

Enclosure Mount

CP-L, Fixed

For fixed installation of enclosure to support arm CP-L. Can be mounted to the top or bottom of an enclosure.

Configuration:

zinc die-cast; includes gasketing and installation materials. Not designed as a base for a support arm system.

Color:

RAL 7030 stone grey.

Twin Casters

Packs of

1 set

Overall height:

3.5"/90 mm

2 twin casters without brake

Color:

black with grey wheels.

For pedestal

CP 6141000

CP 6141100

For pedestal

CP 6141000

CP 6141100

Foot Rest

Packs of

1 set

Trim Panel

Packs of

1

Support Arm Connection

CP-L

Cover Plate

Part No.

6148000

Part No.

6145100

Part No.

6144100

Part No.

6505100

Weight

1.10 lbs/0.5 kg

10° Tilting Adaptor

Part No.

6527100

Weight

2.20 lbs/1.0 kg

Enclosure Mount

Part No.

6525600

HMI 45 HMI 46

13599-IBG-OpInt-HMI.fpo 8/27/01 10:43 AM Page 48

Courtesy of Steven Engineering , Inc.

! 230 Ryan Way, South San Francisco, CA 94080-6370 ! Main Office: (650) 588-9200 ! Outside Local Area: (800) 258-9200 ! www.stevenengineering.com

Enclosure Coupling

CP-L, Rotating

Rotating mount of enclosure to CP-L.

Top or bottom mount.

Configuration:

zinc die-cast including gasketing and installation materials. Approximately 350° rotation. Not designed as a base for a support arm.

Color:

RAL 7030 stone grey.

M5 Springnut

For internal installation of components into Optipanel with depth of 4 and 6"/100 and 150 mm.

Easy installation, the spring secures against undesired movement.

Material:

steel, galvanized, chromated.

Weight

2.65 lbs/1.2 kg

Enclosure Coupling

Part No.

6525100

Packs of

50

M5 Springnut

Part No.

6108000

General Accessories

Keyboard Drawer With

Mouse Pad

19" front panel/3.5 U, for installation in:

• any sufficiently large space

(door, side panel etc.).

The mouse pad is prepared to accept the inductive mouse pad

NEMA 6/IP 67.

Technical specifications:

• space for keyboards up to H x

W x D = 1.7" x 18.4" x 6.8"

(42 x460 x170 mm)

Mouse pad:

• pulls out at the sides including mouse storage compartment for standard pads and prepared for

NEMA 6/IP 67 mouse pad.

Height

3.5 U

Front panel:

• folds out as a wrist support

• lockable, 3 mm double-bit insert may be exchanged for

27 mm inserts, version A, lock cylinder insert with lock no.

3524 E (SZ 2571.000).

Material:

Keyboard Drawer With Mouse Pad

Width

482.6 mm

Depth

251 mm

Part No.

6003000

Front panel: Aluminum, natural anodized

Configuration:

keyboard drawer with mouse pad, including installation hardware and self-adhesive cable tie attachment.

• even with the drawer open, a high level of mechanical protection and shielding are retained.

Drawer housing: sheet steel, painted RAL 7035

Keyboard Drawer 19"/2U

Can be mounted in all VIP 6000 enclosures and 19" systems or on any sufficiently large surface (door, side wall, etc.). Its low weight (5.5

lbs/2.5 kg) makes it ideal for use in support arm systems because adequate room remains for cabling, even when the support arm is connected from below. It can also be locked with a 3524 E lock.

High mechanical protection and sheilding is maintained, even when the drawer is open.

Technical data:

• Total available space:

15.35" x 1.26" x 5.47"/

390 x 32 x 139 mm

Height

2 U

• Drawer has 2.35"/60 mm high space on right for a mouse or trackball or for a 3 1/2" disk drive.

• When a mouse is used or when a 3 1/2" disk drive is installed, only enough space remains for an 11.2"/284 mm wide keyboard.

Material:

Frame: sheet steel, zinc-plated, chromated

Keyboard Drawer With Mouse Pad

Width

19"/482.6 mm

Depth

5.90"/150 mm

Part No.

6002000

Front panel and handle:

aluminum, natural anodized

Configuration:

Drawer housing with drawer, includes slides with stops for ‘open’ position, front panel with handles, gasket and installation hardware.

Note:

For installation in VIP

6000 operator enclosures we recommend cross members that are required for partitioning.

Drawer housing and drawer:

aluminum

NEMA 6/IP 67

Mouse/Mouse Pad

An ideal input device for all areas where heavy contamination is unavoidable, or where high standards of hygiene are crucial.

Because the mouse detects positions inductively, there is no need for a trackball, and the housing is completely sealed with a protective film. This achieves a high protection category of IP 67/NEMA 6.

The mouse operates in conjunction with the inductive mouse pad IP 67 and is available for connection to either a COM or a PS/2 interface.

Material:

Mouse pad: plastic PBT

Mouse: plastic ABS

Color:

Mouse pad: similar to RAL 7032 grey

Mouse: similar to RAL 7032 grey

Technical specifications:

NEMA 6/IP 67 mouse

Mouse connector: DIN 7-pole

Part No.

6444000

6444500

6445000

NEMA 6/IP 67 Mouse / Mouse Pad

Description H x W x D inches

H x W x D mm

8 x 10 x .6

205 x 250 x 15

Packs of

1 Inductive mouse pad IP 67

COM interface

Inductive mouse pad IP 67

PS/2 interface

Mouse IP 67 for COM and PS/2 interface

8 x 10 x .6

205 x 250 x 15

-

1

1

Mouse pad COM interface

Mouse pad—PC connection:

9-pole D-SUB socket DIN 5-pole connector

Mouse pad PS/2 interface

Mouse pad -PC connection:

PS/2 connector

Temperature range:

32°F to 131°F/0°C to 55°C

Power consumption: < 20 mA

Pad size (H x W x D):

8" x 10" x .6"/205 x 250 x 15 mm

IP 67/NEMA 4

Cable lengths: 2,000 mm

Runs under DOS, Windows

3.1/3.11, Windows 95/98,

Windows NT

Ratings:

IP 67/NEMA 4.

Mouse Pad Tray

Is mounted on vertical handles of keyboard housings for accommodation of SM 6444.000 and SM 6444.500 IP

67 mouse pads. The slope of the mouse pad tray is infinitely adjustable.

Installation requires drilling two installation holes in the handle grip brackets.

Material:

sheet steel, chromated

Configuration:

mouse pad tray, installation hardware.

Mouse Holder

Fits Rittal mouse pad trays to ensure safe storage of a standard mouse or the Rittal SM 6445.000 IP 67 mouse.

Material:

sheet steel, chromated

Configuration:

mouse holder, installation hardware.

Description

Mouse pad tray

Packs of

1

Mouse Pad Tray

Packs of

1

Mouse Holder

Part No.

2382000

Part No.

2381000

Corner Handle

Supply includes:

Packs of 4 handle holders, 2 handle tubes, assembly parts.

Mounting on enclosure corner

Ø 6.5

Packs of

1 set

Corner Handle

Mounting on straight surfaces

(90° rotation of handle holder)

Part No.

6107000

25

163

131.5

45

°

92

25

217

Ø 6.5

45

°

132

153

HMI 47 HMI 48

13599-IBG-OpInt-HMI.fpo 8/27/01 10:43 AM Page 50

U Handle

Supply includes:

packs of 2 handle holders, 1 handle tube, assembly parts.

(75)

45

°

230

293

CP 6107100 Mounting on straight surfaces (for front panel size 7U)

Ø6.5

Courtesy of Steven Engineering , Inc.

! 230 Ryan Way, South San Francisco, CA 94080-6370 ! Main Office: (650) 588-9200 ! Outside Local Area: (800) 258-9200 ! www.stevenengineering.com

For front panel dimensions

7 U

19”/482.6 mm

U Handle

Packs of

1 set

1 set

45

°

(240)

395

458

CP 6107200 Mounting on straight surfaces for 19”/482.6 mm

Ø6.5

25

Interface Box

The Rittal interface box provides secure accommodation for all standard computer ports, disk drives and sockets.

The lockable metal cover provides a high mechanical load-bearing capacity, protects against unauthorized access and ensures an increased shielding effect for the installed equipment.

Material:

Frame: extruded aluminum section

Mounting tray: sheet steel, 1.5 mm

Cover: aluminum, 3.0 mm

No socket

Interface Box

Surface finish:

Frame and mounting tray: powder coated in RAL 7035 light grey

Cover: natural anodized

Supply includes:

frame with hinged cover, cam with lock insert no. 3524 E, mounting tray including seal and installation hardware.

Part No.

6107100

6107200

Part No.

2482000

Mounting Bracket/

Mounting Plate

For universal interior installation.

Allows for installation of additional

Rittal accessories and customer supplied components.

Material

: sheet steel, zinc plated, passivated

Supply includes:

4 mounting brackets or mounting plates 12 self-tapping screws

M5 x 10 mm

Additional accessories:

screws for attaching to the screw channels of the

VIP 6000 command panel, Part No.

2504000 (M5 x 10 mm), packs of 500.

Mounting bracket/Mounting plate

Mounting bracket

Mounting plate

Part No.

4597000

4532000

Mounting plate

110

100

4.6

6

Mounting bracket

25

12.5

t=

6(5x) 12.5

6

100

110

4.6

Cover Plate

For secure sealing of an unused support arm connection in the enclosure (CP-L, CP-XL).

Material:

sheet steel, clear chromate

Configuration:

cover plate with gasket, including installation hardware.

Mounting Kit

For installation of:

• aluminum front panels

• control panels

• keyboards in keyboard trays and keyboard housings.

Packs of 30, including clip-in clamps, cage nuts, screws, washers.

Mounting Kit For

Threaded Bolts

for fastening

• aluminum front panels

• control panels

• keyboards to VIP 6000 operator and keyboard housings with threaded bolts.

Cable Clamping Bracket

For Operator Housing

To fit support arm cutout CP-L and CP-XL. Cable clamping optionally via:

• cable clamps

• cable ties for quick assembly SZ

2597.000

• commercially available cable ties.

Bracket height = 25 mm with fitted

40 mm C rail.

Cable Tie Fastener

For all commercially available cable ties up to a width of 4.8 mm. The fastener is inserted into the screw channel and fixed by hammering down the split rivet.

Material:

polyamide 6.6

Support arm connection

CP 6000

CP 6500

Thread

M4

M5

Cable Clamping Bracket

Cable clamping bracket

Part No.

6052000

Material:

sheet steel, zinc plated, passivated.

Supply includes:

1 cable clamping bracket, 1 C rail 2 self-tapping screws M5 x 10 mm.

Packs of

100

Cover Plate

Packs of

1

1

Mounting Kit

Thread

M4

M5

For installation of control panels with studs, only clip-in clamps are needed.

Mounting Kit

Cable Tie Fastener

Part No.

6058000

6053000

Part No.

6058500

6053500

Part No.

6059000

Part No.

6505000

6505500

12.5

Door Stop For VIP 6000

To secure the open panel.

• For mounting at the bottom.

• The installation height is only reduced by 10 mm.

• Opening angle adjustable up to approx. 120°

Material:

sheet steel, zinc plated, passivated.

Stay

Door Stop For VIP 6000

Part No.

6045000

HMI 49 HMI 50

13599-IBG-OpInt-HMI.fpo 8/27/01 10:43 AM Page 52

Technical Specifications

Standard Pushbutton Boxes

K

C

Courtesy of Steven Engineering , Inc.

! 230 Ryan Way, South San Francisco, CA 94080-6370 ! Main Office: (650) 588-9200 ! Outside Local Area: (800) 258-9200 ! www.stevenengineering.com

Technical Specifications

Slim Pushbutton Boxes

K

2.81

B

J

2.25

Typ.

.31 Dia.

2.25

Typ.

Front View

Side View

W

Front View

Cover Removed

1.20

.67

.19

Standard 4-Way Keyed

Pushbutton Hole Detail

E-1PB E-2PB E-3PB E-4PB E-4SPB E-5PB

H

J

.31 Dia.

Front View

2.16

Typ.

2.25

Typ.

See note

E-6PBVL E-6PB E-8PB E-9PB

Hole Arrangement Centered On Cover

1.20

.67

.19

Standard 4-Way Keyed

Pushbutton Hole Detail

C

2.50

Side View

A

B

2.50

W

1.63

Front View

Cover Removed

E-1PBSL

E-2PBSL

E-3PBSL E-4PBSL E-6PBSL

Hole Arrangement Centered On Cover

H

Part No.

E 1PB

E 2PB

E 3PB

E 4PB

E 4SPB

E 5PB

E 6PBVL

E 6PB

E 8PB

E 9PB

*

H

3.50

5.75

8.00

10.25

7.25

12.50

14.75

9.50

20.25

9.50

Outside dimensions (inches)

W

3.25

3.25

3.25

3.25

6.25

3.25

3.25

6.25

3.25

8.50

* Can be mounted to a Rittal Electromate column and base.

D

2.75

2.75

2.75

2.75

3.00

2.75

2.75

3.00

2.75

3.00

Pushbutton Box

H

4.00

Mounting centers

W

2.38

6.25

8.50

10.75

7.75

2.38

2.38

2.38

5.38

13.00

15.25

10.00

20.75

10.00

2.38

2.38

5.38

2.38

7.63

J

3.81

6.06

8.31

10.56

7.56

12.81

15.06

9.81

20.56

9.81

Cover size

K

3.56

3.56

3.56

3.56

6.56

3.56

3.56

6.56

3.56

8.81

Part No.

E 1PBSL

E 2PBSL

E 3PBSL

E 4PBSL

E 6PBSL

*

H

4.00

6.25

8.50

10.75

16.25

Outside dimensions (inches)

W

2.50

2.50

2.50

2.50

2.50

* Add an additional 1" between pushbutton holes at center of enclosure.

D

2.50

2.50

2.50

2.50

2.50

Pushbutton Box

Width

H

4.50

6.75

9.00

11.25

16.75

Mounting centers

W

1.63

1.63

1.63

1.63

1.63

J

4.31

6.56

8.81

11.06

16.56

Cover size

K

2.81

2.81

2.81

2.81

2.81

HMI 51 HMI 52

13599-IBG-OpInt-HMI.fpo 8/27/01 10:43 AM Page 54

Courtesy of Steven Engineering , Inc.

! 230 Ryan Way, South San Francisco, CA 94080-6370 ! Main Office: (650) 588-9200 ! Outside Local Area: (800) 258-9200 ! www.stevenengineering.com

Technical Specifications

Miniature Pushbutton Boxes

J

K C

A

B

H

.68

.48

.13

Standard 4-Way

Keyed Pushbutton

Hole Detail

1.88

Typ.

1.50

Typ.

.31 Dia.

Front View

Cover Assembled

Part No.

E 1PBGM

E 2PBGM

E 3PBGM

E 4PBGM

E 6PBGM

*

Height

A

3.25

5.13

7.00

8.88

8.50

Width

B

2.75

2.75

2.75

2.75

5.00

* Can be mounted to a Rittal Electromate column and base.

Side View

W

Front View

Cover Removed

E-1PBGM E-2PBGM E-3PBGM E-4PBGM E-6PBGM

Hole Arrangement Centered On Cover

Depth

C

3.50

3.50

3.50

3.50

4.25

Pushbutton Box

H

3.75

5.63

7.50

9.38

9.00

Mounting centers

W

1.88

1.88

1.88

1.88

4.13

J

3.56

5.44

7.31

9.19

8.81

Cover size

K

3.06

3.06

3.06

3.06

5.31

Technical Specifications

Sloping Front Pushbutton Boxes

E

H

B

W

.31 Dia.

Section X-X

C

F

2.25

N

M

2.25

Cover Detail

D

X

X

C

J

Side View

30°

A

E-1PBA E-2PBA E-3PBA E-4PBA E-4SPBA E-6PBA E-9PBA

Hole Arrangement

Extra Deep Pushbutton Boxes

K

J

C

4.75

A

B

H

1.20

.67

.19

Standard 4-Way Keyed

Pushbutton Hole Detail

1.20

.67

.19

Standard 4-Way Keyed

Pushbutton Hole Detail

2.25 Typ.

2.25

.31 Dia.

Typ.

Front View

Cover Assembled

Part No.

E 1PBXD

E 2PBXD

E 3PBXD

E 4PBXD

E 6PBXD

*

Height

A

4.00

6.00

8.00

10.00

9.50

* Can be mounted to Rittal Electromate column and base.

Width

B

4.00

4.00

4.00

4.00

6.25

Side View

W

Front View

Cover Removed

E-1PBXD E-2PBXD E-3PBXD E-4PBXD E-6PBXD

Hole Arrangement Centered On Cover

Depth

C

4.75

4.75

4.75

4.75

4.75

Pushbutton Box

H

4.50

6.50

8.50

10.50

10.00

Mounting centers

W

3.13

3.13

3.13

3.13

5.38

J

4.31

6.31

6.31

10.31

9.81

Cover size

K

4.31

4.31

4.31

4.31

6.56

Part No.

E 1PBA

E 2PBA

E 3PBA

E 4PBA

E 4SPBA

E 6PBA

E 9PBA

Outside dimensions (inches)

H

3.50

3.50

3.50

3.50

7.25

7.25

9.50

W

3.25

5.50

7.75

10.00

6.25

8.50

8.50

D

4.88

4.88

4.88

4.88

6.75

6.75

7.88

Height of base

D

3.53

3.53

3.53

3.53

6.78

6.78

8.75

Overall height

E

4.53

4.53

4.53

4.53

7.78

7.78

9.75

Pushbutton Box

H

4.03

Mounting centers

W

2.38

4.03

4.03

4.03

7.28

7.28

9.25

4.63

6.88

9.13

5.38

7.63

7.63

F

3.81

3.81

3.81

3.81

7.56

7.56

9.81

Cover size

G

3.56

5.81

8.06

10.31

6.56

8.81

8.81

M

1.78

1.78

1.78

1.78

2.16

2.16

2.16

Hole location

N

1.91

1.91

1.91

1.91

2.66

2.66

2.66

J

3.38

3.38

3.38

3.38

5.25

5.25

6.38

HMI 53 HMI 54

13599-IBG-OpInt-HMI.fpo 8/27/01 10:43 AM Page 56

Technical Specifications

AP Desk Consoles, Bottom Section

1.5

2600600/2610600

W1

797

W3

58

50 700 50

50

Courtesy of Steven Engineering , Inc.

! 230 Ryan Way, South San Francisco, CA 94080-6370 ! Main Office: (650) 588-9200 ! Outside Local Area: (800) 258-9200 ! www.stevenengineering.com

Technical Specifications

AP Desk Consoles, Center Section

2620600/2640600/2650600

W1

W3

2613200/2643200/2653200

120

W6 120

W4

W7

W5

50

470

370

100

50 270

758.5

820

950

55.5

460

393

12.5

12

°

24'

41

32

148.5

Inside View Of Lid

W8

W9

148.5

32

50

25 6.5

W2

W5 50

W4

33

W5

50

370

2600600/2620600

10 12.5

373

47.5

50

270

400

24

30

20 90

F1

90 20

440

2610600/2640600/2650600

16.5

Mounting panel

16.5

8 max. 395

19

F1

24

30

50

340

500

24

30

19

24

W3

W1

120

2611200/2641200

W6 120

W4

W7

W5

50

370

270

55.5

460

393

12.5

12

°

24'

32

148.5

Inside View Of Lid

W8

W9

148.5

32

50

50 270

758.5

820

850

41

25 6.5

W2

Height (H1) inches mm

Width (W1) inches mm

Depth (D) inches mm

Part No.

W3

W4

W5

F1

No. doors

Weight lbs kg

26.38

670

31.50

800

15.75

400

2600600

724

-

-

715

1

95.7

43.5

HMI 55

26.38

670

31.50

800

19.69

500

2610600

724

-

-

702

1

115.5

52.5

Enclosure

26.38

670

47.24

1200

15.75

400

2620600

1124

1100

525

1115

2

137.5

62.5

26.38

670

47.24

1200

19.69

500

2640600

1124

1100

525

1102

2

165.2

75.0

26.38

670

62.99

1600

19.69

500

2650600

1524

1500

725

1502

2

211.5

96.0

W3

W1

Height inches mm

Width (W1) inches mm

Depth inches mm

Part No.

W2

W3

W4

W5

W6

W7

W8

W9

Weight lbs kg

742

640

660

560

700

733

500

56.1

25.5

7.87

200

31.50

800

15.75

400

2611200

797

742

640

660

560

700

733

500

67.3

30.6

7.87

200

31.50

800

19.69

500

2613200

797

Enclosure

1142

1040

1060

960

1100

1133

900

78.1

35.5

7.87

200

47.24

1200

15.75

400

2641200

1197

1142

1040

1060

960

1100

1133

900

93.7

42.6

7.87

200

47.24

1200

19.69

500

2643200

1197

7.87

200

62.99

1600

19.69

500

2653200

1597

1542

1440

1460

1360

1500

1533

2 x 650

116.2

52.8

HMI 56

13599-IBG-OpInt-HMI.fpo 8/27/01 10:43 AM Page 58

Technical Specifications

AP Desk Consoles, Top Section

286.5

26

T

X

353.5

407

Courtesy of Steven Engineering , Inc.

! 230 Ryan Way, South San Francisco, CA 94080-6370 ! Main Office: (650) 588-9200 ! Outside Local Area: (800) 258-9200 ! www.stevenengineering.com

2612600/2642600

W1

W2

W3

Mounting panel

10 12.5

50

270

370

387.5

356.5

26

T

X

11

° 55.5

353.5

407

32

20 90

2614600/2644600

View in direction X

W2

W4

32

11.5

60

F1

View in direction X

90 20

9

9

60

11.5

9

H8

H9

W2

W3

H4

H5

H6

H7

Height inches mm

Width (W1) inches mm

Depth inches mm

Part No.

H1

H2

H3

W4

W5

W6

T rotatable, 3HU

T rotatable, 6HU

T rotatable, max. height

T fixed, max. height

F1

G1

Weight lbs kg

HMI 57

-

300

195

110

797

742

733

-

300

715

-

49.5

22.5

-

-

-

-

304

-

-

-

16.93

430

31.50

800

15.75

400

2612600

422

30

24

50

340

440

470

11

°

55.5

2647600/2648600/2649600

106

100

View in direction X

387.5

356.5

26

496*

T

F1

465*

55.5

24

30

50

340

440

546

7

°

Enclosure

16.93

430

31.50

800

16.93

430

47.24

1200

16.93 24.80 24.80 24.80

430 630 630 630

47.24

31.50 47.24 62.99

1200 800 1200 1600

19.69

500

15.75

400

19.69 23.62 23.62 23.62

500 600 600 600

2647600 2648600 2649600 2614600

422

304

2642600 2644600

AP 2647/2648/2649/2662/2663/2664

304 304 504 504 504

300

195

110

430

742

733

-

-

-

-

-

797

-

-

-

-

727

348

67.3

30.6

1142

1133

-

-

300

195

110

300

-

-

-

1197

-

-

-

-

1115

-

88.0

40.0

-

-

-

548 548 548

525 525 525

559 559 559

-

-

1197

1142

1133

-

-

300

550 550 550

500 500 500

797 1197 1597

742 1142 1542

733 1133 1533

732 1132 1532

500 900 1300

300 500 500

195

110

430

1127

195

310

395

310

395

310

455 455 455

727 1127 1527

348

105.6

548 548 548

105.1 141.68 190.9

48.0 47.8 64.4 86.8

Technical Specifications

AP Desk Console Systems

2670600/2672600

W2

W3

Not for AP 2670600

47

2666600/2668600

W2

W3

72

20

2666600/2668600/

2670600/2672600

480

498

447

358-368

50

1.5

16.5

99.5

498

W6

52.5

W5

W6

W7

W8

W9

W10

W11

F1

Height inches mm

Width (W1) inches mm

Depth inches mm

Part No.

W2

W3

W4

F2

No. doors

Weight lbs kg

6.5

W4

W1

W5

B8

B9

W7

No hinge for AP

2666.600/

AP 2668.600

1.5

1.5

50

16.5

99.5

8

420

20

61

12.5

W5

W4

W1

78.5

11

1.5

F3

51

50

270

370

400

11

78.5

52.5

40

780

40

52.5

11

B10

B11

12.5

27.5

F2

F1

52.5

Enclosure

-

500

398

535

544

524

500

-

37.80

960

23.62

600

37.80

960

31.50

800

37.80

960

39.37

1000

37.80

960

47.24

1200

15.75/18.90

15.75/18.90

15.75/18.90 15.75/18.90

400/480 400/480 400/480 400/480

2666600

597

2668600

797

2670600

997

2672600

1197

744

724

700

-

-

700

598

735

944

924

900

495

497

900

798

935

1144

1124

1100

595

597

1100

998

1135

597

530

475

1

113.3

51.5

797

730

675

1

137.5

62.5

997

930

875

2

174.9

79.5

1197

1130

1075

2

198.0

90.0

HMI 58

13599-IBG-OpInt-HMI.fpo 8/27/01 10:43 AM Page 60

Technical Specifications

AP Universal Console Systems

42.5

604.5

Courtesy of Steven Engineering , Inc.

! 230 Ryan Way, South San Francisco, CA 94080-6370 ! Main Office: (650) 588-9200 ! Outside Local Area: (800) 258-9200 ! www.stevenengineering.com

Technical Specifications

Consoles, Pedestals and Bases

600

592

2694600

417.5

42.5

515

365

440

512

173.5

11

28

635

B

Y

Front View

Y

.75

A

30°

2.50

M

Section Y-Y

A

1.75

N

C

44.3

592 i. L. 432 i. L. 532

Desk Unit

502

20

25.5

i. L. 274.5

36.5

i. L. 271.5

360

D

Omit if E is less than

30.00

A

B

60°

Section Y-Y

30°

Console can be positioned at either 60° or 30° angle

E

View A-A View A-A

(with cover removed)

AP 2694 + 2696

AP 2694 + 2696 AP 2694 + MC 4702 AP 2694 + MC 4757

Part No.

2694600

Console

Dimensions H x W x D

51.18" x 23.62" x 19.69"

1300 x 600 x 500 mm

Version

Top lid, shorted front door

Part No.

E 8C8

E 8C12

E 8C16

E 12C12

E 12C16

E 12C20

E 16C20

E 16C24

H

A

8.00

8.00

8.00

12.00

12.00

12.00

16.00

16.00

Outside dimensions (inches)

W

B

8.00

12.00

16.00

12.00

16.00

20.00

20.00

24.00

D

C

7.09

7.09

7.09

9.09

9.09

9.09

11.29

11.09

Console

D

8.31

8.31

8.31

12.31

12.31

12.31

16.31

16.31

Cover size

E

8.31

12.31

16.31

12.31

16.31

24.31

70.31

24.31

M

7.44

7.44

7.44

10.91

10.91

10.91

14.38

14.38

N

5.63

5.63

5.63

7.63

7.63

7.63

9.63

9.63

HMI 59 HMI 60

13599-IBG-OpInt-HMI.fpo 8/27/01 10:43 AM Page 62

Technical Specifications

Consoles, Pedestals and Bases

5.38

3.88

4x4 Top

Column Flange

35.00

B

F

.31 Dia. typ.

4 places

.75 Typ. 8 places

E

A

3.88

7.63

Courtesy of Steven Engineering , Inc.

! 230 Ryan Way, South San Francisco, CA 94080-6370 ! Main Office: (650) 588-9200 ! Outside Local Area: (800) 258-9200 ! www.stevenengineering.com

Technical Specifications

Series 9 Operator Enclosures

7.63

4x4 Bottom

Column Flange

See Base For Hole Locations

B

5.88

6x6 Bottom

Column Flange

See Base For Hole Locations

B

A

(48.00)

E

2.53

D

(26.25)

Y

Front View

2.88

Y

Control panel

32.00

C

(18.00)

2.00

45°

X

Side View

X

C

3.31 Typ. 8 places

A

.31 Dia.

Typ. 12 places

Base Top View

.13

Typ.

.75 Typ. 8 places

1.13

Removable subpanels

(optional)

L

(17.00)

.50

Section Y-Y

F

(22.63)

G

Removable subpanels

(optional)

Section X-X

3.50

Control Panel Detail

K

J

(27.00)

2.13

Column

Base End View

1.13

Part No.

E 44CCOL

E 66CCOL

Part No.

E 18SBASE

E 24SBASE

A

4.00

6.00

Outside dimensions (inches)

B

4.00

6.00

Pedastal

Base

A

18.00

24.00

B

18.00

24.00

E

7.00

7.75

Cover plate

F

3.75

5.75

Stiffener location

E

3.00

5.00

Part No.

H W D Door size panel

Control panel

A B C D E F G

E C924B

48.00

24.00

18.00

26.25

22.38

23.19

23.19

E C936B

48.00

36.00

18.00

26.25

34.38

22.63

35.19

Rear mounting panel

E 30P20

E 30P30

Console

Rear mounting panel size

J

27.00

27.00

F

17.00

27.00

Side mounting

E 30P20

E 30P20

Side mounting panel size

J

27.00

27.00

L

17.00

17.00

Caster kit

E C10C

E C10C

HMI 61 HMI 62

13599-IBG-OpInt-HMI.fpo 8/27/01 10:43 AM Page 64

Technical Specifications

Series 12 Operator Enclosures

Courtesy of Steven Engineering , Inc.

! 230 Ryan Way, South San Francisco, CA 94080-6370 ! Main Office: (650) 588-9200 ! Outside Local Area: (800) 258-9200 ! www.stevenengineering.com

Technical Specifications

Series 14 Operator Enclosures

C

21.88

See detail for doors

5.00

Front View

Instrument panel

Control panel

Writing desk

6.00

164°

Access panel

B

(20.00)

Console top

3.00

15.13

32.00

10.00

24.00

26.91

A

(36.00)

J

(32.00)

K

Body stiffeners

0.88

0.88

20.00

Side View Section X-X

3.00

24.13

9.50

2.00

M

(15.19)

N

C

Continuous hinge

D

(25.25)

X

E

Front View

X

Console top

Instrument panel

Control panel see detail

Writing desk

12.50

Rear access panel

B

(16.00)

20.25

A

(50.00)

32.00

10.00

Channel

20.25

P

(15.19)

23.00

Side View

6.25

R

2.06

S

(45.75)

Back View

L

(19.18)

M

Instrument Panel

P

G

Continuous hinge

Control Panel

F

(13.03)

Access Panel

N

(16.31)

2.06

2.13

D

(21.88)

D

(21.88)

Body

Catalog

No.

E C12B

Body height

A

36.00

Top height

B

20.00

Width

C

36.00

Door size

D

21.88

E

Single Door

Detail A

E

31.94

E

(21.31)

E

(21.31)

43.38

Double Door

Detail B

Console

Control panel

F

13.03

G

35.19

Rear mounting panel size

J

32.00

K

30.00

Top

Catalog

No.

E C12T

Instrument panel Access panel

L

19.19

M

35.19

N

20.19

P

32.19

G

(19.13)

Control Panel

1.88 Min.

1.88 Min.

2.88 Min.

Section X-X

(Half Panels Installed)

Panel and panel mounting hardware shown are optional

2.38

1.88 Min.

12.88 Min.

2.88 Min.

3.50

K

L

(42.25)

J

(22.00)

5.38

3.50

Section X-X

(Half Panels Installed)

Panel and panel mounting hardware shown are optional

Section View Showing

Half And Full Panels

Body

Part No.

E C14B

E C1436B

Top

Part No.

E C14T

E C1436T

Body height

A

50.00

50.00

Top height

B

16.00

16.00

Width

C

24.00

36.00

Console

D

25.25

25.25

Front door size

E

19.59

31.59

F

19.13

19.13

Control panel size

G

23.19

35.19

Half Mounting

Panel

Part No.

E C14P2

E C1436P2

Half mounting panel size

J

22.00

22.00

K

17.00

29.00

Full

Mounting

Panel

Part No.

E C14P3

E C1436P3

L

42.50

42.50

Full mounting panel size

K

17.00

29.00

Swingout

Mounting

Panel

Part No.

E C14P1

E C1436P1

22.00

22.00

Console (Continued)

Swingout mounting panel size

18.13

30.13

M

15.19

15.19

Instrument panel size

N

23.19

35.19

P

15.19

15.19

Access panel size

R

23.19

35.19

S

45.75

45.75

Full rear door size

T

19.59

31.59

HMI 63 HMI 64

13599-IBG-OpInt-HMI.fpo 8/27/01 10:43 AM Page 66

Technical Specifications

TS8 PC Enclosures

Courtesy of Steven Engineering , Inc.

! 230 Ryan Way, South San Francisco, CA 94080-6370 ! Main Office: (650) 588-9200 ! Outside Local Area: (800) 258-9200 ! www.stevenengineering.com

605 i.L. 512

8366000/8368000

624 (824) i.L. 512

460

384

366

190

Technical Specifications

Standard PC Freestanding Enclosures

599 i. L. 512

With Keyboard Drawer

647 (847) i. L. 502 (702)

318 205

410

Part No.

8366000

8366100

8368000

8368100

H

63

63

63

63 inches

W

24

24

24

24

362

636 (836)

605 i.L.512

454

386

8366100/8368100

624 i.L.512

287

157

397

362

636

Enclosure

Exact outside dimensions

D

25

25

33

33

H

1600

1600

1600

1600 mm

W

600

600

600

600

D

636

636

836

836

492

620 (820)

599 i. L. 512

With Console

647 i. L. 502

410

11

°

204

With Keyboard Shelf

599 i. L. 512

647 (847) i. L. 502 (702)

231

410

385 (585)

492

620 (820)

599 i.L. 512

With Drawer/Panel

647 i.L. 502

20

410

465

M8 x 20

318 205

492

620 i.L. = available space

HU = available installation height (1HU = 1.75")

492

620

Front installation

Part No.

H inches/mm

W inches/mm

D inches/mm

Packs of

-

-

1

-

With keyboard drawer (including keyboard bracket)

4603703*

62.99"/1600 mm

23.62"/600 mm

25.59"/650 mm

Enclosure

With keyboard shelf

4603920

62.99"/1600 mm

23.62"/600 mm

25.59"/650 mm

* Information for PC ValuePack Part Nos. 9968185 and 9968187 as well.

** Information for PC ValuePack Part Nos. 9968186 and 9968188 as well.

With console

4603704

62.99"/1600 mm

23.62"/600 mm

35.83"/910 mm

With keyboard drawer (including keyboard bracket)

4609703**

62.99"/1600 mm

23.62"/600 mm

33.46"/850 mm

With keyboard shelf

4609920

62.99”/1600 mm

23.62”/600 mm

33.46”/850 mm

With drawer/panel

4603913

62.99”/1600 mm

23.62”/600 mm

25.59”/650 mm

HMI 65 HMI 66

13599-IBG-OpInt-HMI.fpo 8/27/01 10:43 AM Page 68

Technical Specifications

Standing PC Freestanding Enclosures

With Keyboard Drawer

599 i. L. 512

647 (847) i. L. 502 (702)

317.5

205

Courtesy of Steven Engineering , Inc.

! 230 Ryan Way, South San Francisco, CA 94080-6370 ! Main Office: (650) 588-9200 ! Outside Local Area: (800) 258-9200 ! www.stevenengineering.com

With Keyboard Shelf

599 i. L. 512

647 (847) i. L. 502 (702)

231

Technical Specifications

PC Desktop/Pedestal Enclosures

With Keyboard Drawer

599 i. L. 512

410

385 (585)

HMI 67

492

620 (820)

492

599 i. L. 512

With Console

647 i. L. 502

492

Front installation

Part No.

H (inches/mm)

W (inches/mm)

D (inches/mm)

11

°

204

486

620

With keyboard drawer

4603603

63.0/1600

23.6/600

25.6/650

Enclosure

With keyboard shelf

4603820

63.0/1600

23.6/600

25.6/650

620 (820)

With console

4603604

63.0/1600

23.6/600

25.6/35.8 (650/910)

647 i. L. 502

318 205

With Keyboard Shelf

599 i. L. 512

410

647 i. L. 502

231

385

With Console

599 i. L. 512

647 i. L. 502

112

410

11

°

204

486

With Drawer/Panel

Front installation

Part No.

H (inches/mm)

W (inches/mm)

D (inches/mm)

600 i.L. 512

647 i.L. 502

Packs of

-

-

1

-

20

410

465

M8 x 20

With keyboard drawer

4617703

29.53"/750 mm

23.62"/600 mm

25.59"/650 mm

Enclosure

With keyboard shelf

4617920

29.53"/750 mm

23.62"/600 mm

25.59"/650 mm

X

With console

4617704

29.53"/750 mm

23.62"/600 mm

25.59"/650 mm

318 205

With drawer/panel

4617913

29.53"/750 mm

23.62"/600 mm

25.59"/650 mm

HMI 68

13599-IBG-OpInt-HMI.fpo 8/27/01 10:43 AM Page 70

Technical Specifications

VIP Command Panel

Front frame, wide

B6 (B1 + 12)

B1

B4 (B1 – 8)

B5 (B1 – 33)

B2 (B1 + 133)

1 Installation depth 6.10"/155 mm, screw-on

Crosssection of cable duct

B3 (with fins/partial fins: B1 + 3.35"/85 mm)

B3 (without fins: B1 + 2.17"/55 mm)

B7 (B1 + 43)

B8 (B1 + 25)

68

B5 (B1 – 33)

Support arm connection, for CP-L system

2 Installation depth 7.28"/185 mm, screw-on

Support arm connection for system CP-L

Dimensions in brackets refer to narrow and combined front frames

Height dimensions:

H1 = Height of front panel

H2 = Overall height

H3 = Enclosure height

(with fins: H1 + 85; without fins: H1 + 55)

H4 = Clearance height between the enclosure sections

H5 = Clearance height between the retaining claws

H6 = Clearance height between the front frames

H7 = Height of rear panel

(H1 + 43)

H8 = Clearance frame, height

(H1 + 25)

Width dimensions:

B1 = Width of front panel

B2 = Overal width

B3 = Housing width

B4 = Clearance width between the enclosure sections

B5 = Clearance width between the retaining claws of the assembly parts

B6 = Clearance width between the front frames

B7 = Width of rear panel

B8 = Clearance frame, width

HMI 69

Narrow

B6 (B1 + 12)

Courtesy of Steven Engineering , Inc.

! 230 Ryan Way, South San Francisco, CA 94080-6370 ! Main Office: (650) 588-9200 ! Outside Local Area: (800) 258-9200 ! www.stevenengineering.com

Technical Specifications

VIP Command Panel

4

Installation depth 11.61"/295 mm, screw-on

Combined

B6 (B1 + 12)

5 Installation depth 11.61"/295 mm, hinged

Support arm connection for CP-L system

Support arm connection for CP-XL system

X

A

B2 (B1 + 77) B2 (B1 + 88)

Support arm connections

CP-L (CP 6500)

7

Ø

82

Ø 70

CP-XL (CP 6000)

7

Ø

11

2

Ø 100

3 Installation depth 7.28"/185 mm, hinged

Support arm connection for system CP-L

17

A = Max. installation space for hinged housings

X

Y

A

Maximum 130

17

X

Y

17

B1

Dimensions in brackets refer to narrow and combined front frames

6 Installation depth 12.91"/328 mm, screw-on

Support arm connection for CP-XL system

Dimensions in brackets refer to narrow and combined front frames

8 Installation depth 17.24"/438 mm, screw-on

Support arm connection for CP-XL system

17

7 Installation depth 12.91"/328 mm, hinged

n d ep th

12

.91"/32

8

m m

Support arm connection for

CP-XL system

M axim um

installatio

X

Y

17

A

Maximum 130

9 Installation depth 17.24"/438 mm, hinged

M a xim u m

in sta lla tio n

de p th 1

7

.24

"/43

8 m m

Support arm connection for

CP-XL system

X

Y

A

Maximum 180

Dimensions in brackets refer to narrow and combined front frames

Calculating the swivel mounting space

60

50

40

30

100

90

80

70

20

10

0

250 300 350 400 450

Front panel width B1 (mm)

500 550 600

482.6 mm (19

)

Y

X

650 700 750

Calculating the swivel mounting space

160

140

120

100

260

240

220

200

180

80

60

40

20

0

250 300 350 400

Front panel width B1 (mm)

450 500 550 600

482.6 mm (19

)

Y

X

650 700 750

HMI 70

13599-IBG-OpInt-HMI.fpo 8/27/01 10:43 AM Page 72

Technical Specifications

VIP Keyboard Housing

1 Installation depth 105 mm

Front frame, wide

B4 (B1 + 12)

B1

B3 (B1 + 61)

B2 (B1 + 133)

Narrow

92

B1

B2 (B1 + 77)

B4 (B1 + 12)

B3 (B1 + 61)

Combined

92

B1

B2 (B1 + 88)

B4 (B1 + 12)

B3 (B1 + 61)

2

Installation depth 44 mm

Front frame, wide

B4 (B1 + 12)

B1

B3 (B1 + 55)

B2 (B1 + 133)

HMI 71

Courtesy of Steven Engineering , Inc.

! 230 Ryan Way, South San Francisco, CA 94080-6370 ! Main Office: (650) 588-9200 ! Outside Local Area: (800) 258-9200 ! www.stevenengineering.com

CP 6016.000 /

CP 6016.500

H1 x 0.87 + 123*

30

°

H2 (H

1 + 133)

H4 (H

1 + 12)

H5 (H

H1

1 –

8)

X

CP 6058.000: M4

CP 6053.000: M5

H6 (H

H3 (H

1 + 43)

1 + 61)

123

H1 x 0.87 + 74*

X

87

22

30

°

CP 6058.000: M4

CP 6053.000: M5

H6 (H

H3 (H

1 + 43)

1 + 61)

H2 (H

H4 (H

1 + 77)

1 + 12)

H5 (H

H1

1 –

8)

126

Technical Specifications

VIP Keyboard Housing

Narrow

B2 (B1 + 77)

B1 – 27

B1

B4 (B1 + 12)

B3 (B1 + 61)

Combined

B2 (B1 + 77)

B1 – 27

B1

B4 (B1 + 12)

B3 (B1 + 61)

3 Depth 27 mm

Wide front frame, with cable entry

131 H1 x 0.87 + 74*

H2 (H1 + 77)

H4 (H1 + 12)

66

– 8)

CP 6058.000: M4

CP 6053.000: M5

X

H6 (H1 + 43)

H3 (H1 + 56)

30

°

131 H1 x 0.87 + 74*

H2 (H1 + 77)

H4 (H1 + 12)

66

– 8)

CP 6058.000: M4

CP 6053.000: M5

X

H6 (H1 + 43)

H3 (H1 + 56)

30

°

CP 6016.000 /

CP 6016.500

30

°

27

H2 (H1 + 121)

H1

H1 x 0.87 + 74*

X

87

22

30

°

CP 6058.000: M4

CP 6053.000: M5

H6 (H

H3 (H

1 + 43)

1 + 61)

H2 (H

H4 (H

1 + 77)

1 + 12)

H5 (H

H1

1 –

8)

126

Ø 29

B4

B2 (B1 + 121)

4 Depth 27 mm

Wide front frame, for cable tube, flexible

B4

B2 (B1 + 121)

H1 x 0.87 + 112*

CP 6016.000 /

CP 6016.500

X

30

°

27

H2 (H1 + 121)

H1

H1 x 0.87 + 112*

CP 6016.000 /

CP 6016.500

CP 6058: M4

CP 6053: M5

30

°

H1 x 0.87 + 123*

H2 (H

1 + 133)

H4 (H

1 + 12)

H5 (H

H1

1 –

8)

X

H6 (H

H3 (H

1 + 43)

1 + 56)

63

X = Cross-section of cable tube connection

68

Height dimensions:

H1 = Height of front panel

H2 = Overall height

H3 = Enclosure height

H4 = Clearance height between the front frames

H5 = Clearance height between the enclosure sections

H6 = Height of rear panel

Width dimensions:

B1 = Width of front panel

B2 = Overal width

B3 = Housing width

B4 = Clearance width between the front frames

* applies for angles of 30° to the horizontal

HMI 72

13599-IBG-OpInt-HMI.fpo 8/27/01 10:43 AM Page 74

Technical Specifications

VIP Command Panel

Cross member

Front panel 1

Cross mullion

CP 6015000

Front panel 2

Sealing bar

Front panel 1

Courtesy of Steven Engineering , Inc.

! 230 Ryan Way, South San Francisco, CA 94080-6370 ! Main Office: (650) 588-9200 ! Outside Local Area: (800) 258-9200 ! www.stevenengineering.com

Front panel fixed from the inside

Cover trim

Lower front panel, covered screws

Front panel fixed from the outside

6

B1/H1

17

6 17

End trim

Lower front panel

B1/H1

6

Technical Specifications

VIP Command Panel

Minimum front panel width (B1)

dependant on

• Installation depth of operator housing

• Connection of operator/keyboard housing

• Location of the pendant arm connection

Dimensions in inches/mm

Connection to the keyboard housing

(see 3.7)

Position of the carrying arm connector

(see 3.6)

1

6

2

3

Installation depth of operator housing (see 3.1)

4 6

5

7

Spacer trim

Level front panel

6

B1/H1

6

0

none

0

to

3

top or bottom

169 265

Minimum front panel width

1

4

Frame connector or

Frame hinged connector

1

top

2

and bottom

3

169

339*

265

445*

1

top

189 265

2

Housing cable connector

2

and bottom

3

339 445

1

top

169 265

3

Housing arm connector

2

and bottom

3

397* 445*

*Lesser front panel widths for asymmetrical pendant arm configurations are possible by request.

169

169

339*

189

339

169

397*

265

265

445*

265

445

265

445*

Installation Components Load Limits In Lbs/N

Sealing Bar

CP 6015000

Installation kit:

M5: CP 6053500

M4: CP 6058500

Installation kit:

M5: CP 6053000

M4: CP 6058000

M6: CP 6053000/6058000

+ EL 2092200

+ screws M6 x 25

Front panel 2

Keyboard connection for wide front frame

Frame connector, rigid, for any keyboard housing

Frame connector, adjustable, for any keyboard housing

Keyboard connection for narrow or combination front frame

Frame connector hinged for keyboard housing: installation depth 4.13"/105 mm

+ 1.73"/44 mm

Housing tunnel connector keyboard housing: installation depth 4.13"/105 mm

Housing arm connector for keyboard housing: installation depth

1.73"/44 mm

90

° 1

3

5

°

1

2

0 ° 1

2

0

°

75

°

120

°

CP 6351.009

CP 6351.009

30

°

8

9

265

F

1

110/

500

F1 = 110/500

F

5

11/50

F

2

F

3

F

2

F

3

F

2

F

2

F

4

99/

450

39.6/180

(33/150)

70.4/

320

F1 = 110/500 F1 = 110/500

(103.4/

470)

28.6/130

(22/100)

F

5

11/50

70.4/

320

F1 = 110/500

(103.4/470)

77/

350

33/150

(26.4/

120)

F1 = 110/500

(103.4/470)

F

5

11/50

F

2

F

4

66/

300

33/150

(26.4/

120)

F1 = 110/500

(103.4/470)

39.6/180

(33/150)

F

3

F

2

F

4

66/

300

26.4/

120

F1 = 132/600

(125.4/570)

F

3

F

2

F

4

28.6/130

(22/100)

F

5

66/

300

26.4/

120

F1 = 132/600

(125.4/570)

F

1

= total weight, F

2

11/50

Installation Weight Limit:

= housing (with support arm),

F

3

= front part, F

4

= rear part, F

5

= keyboard housing

F

3

F

2

F

4

39.6/180

(33/150)

66/

300

26.4/

120

F1 = 132/600

(125.4/570)

F

3

F

2

F

4

28.6/130

(22/100)

66/

300

26.4/

120

F1 = 132/600

(125.4/570)

F

5

11/50

Installation Weight Limit:

Values in parenthesis are for hinged version (operator housing).

Housings for higher weights by request only.

HMI 73 HMI 74

13599-IBG-OpInt-HMI.fpo 8/27/01 10:43 AM Page 76

Technical Specifications

Optipanel Operator Housing

90

148

B1

B3 (B1 — 8)

B4 (B1 — 33)

B3 (B1 — 8)

B2 (B1 + 44)

Installation depth 2"/50 mm

130

95

With option for support arm connection from the rear

With option for support arm connection from the rear

Courtesy of Steven Engineering , Inc.

! 230 Ryan Way, South San Francisco, CA 94080-6370 ! Main Office: (650) 588-9200 ! Outside Local Area: (800) 258-9200 ! www.stevenengineering.com

132

Max. installation depth

1.6"/41 mm

Max. installation depth

4"/100 mm

Max. installation depth

2"/50 mm

Max. installation depth

6"/150 mm

Technical Specifications

Optipanel Keyboard Housing

Installation depth 2"/50 mm

B2 (B1 + 44)

B3 (B1 – 8)

B4 (B1 – 33)

B3 (B1 – 8)

B1

With option for keyboard housing

Cable duct

With option for keyboard housing

Cable duct

With option for keyboard housing

10

58 + 0.87 x H1*

H1

H3 (H

H2 (H

H4 (H1

8)

– 33)

H6 (H

1 +

11)

1 + 44)

CP 6053.XXX: M5

CP 6058.XXX: M4

Max. installation depth

2"/50 mm

60

* valid for 30° tilt to horizontal

B6 (B1 + 11)

Installation depth 4"/100 mm

B6 (B1 + 11)

Support arm cutouts

CP-L

❑ for installation depths 4"/100 mm or

6"/150 mm

95

CP-L

❍ for installation depth 6"/150 mm

Channel for installation of M5 spring nut

Installation depth 6"/150 mm

Ø 82

R35

38

B6 (B1 + 11)

For mounting of:

• CP 6525.1x0

• CP 6525.6x0

Channel for installation of M5 spring nut

Height dimensions:

H1=Height of front panel

H2=Total height

H3=Clearance between enclosure profiles

H4=Clearance between the retaining clamps of installation kit

H5=Height of rear wall

H6=Clearance for mounting (trim-to-trim), height

Front panel, screwed-on

From inside

B1/H1

6

Width dimensions:

W1=Width of front panel

W2=Total width

W3=Clearance between enclosure profiles

W4=Clearance between the retaining clamps

From outside

6 of installation kit

W5=Width of rear wall (W1 + 36 mm)

W6=Clearance for mounting (trim-to-trim), width

B1/H1

Cross mullion

For mounting of:

• CP 6525.0x0

• CP 6525.5x0

• CP 6526.0x0

Installation depth 4"/100 mm

B2 (B1 + 44)

B3 (B1 – 8)

B4 (B1 – 33)

B3 (B1 – 8)

Cross section cable duct connection

68

Keyboard housing connection

Frame hinge connector

Tilt angle continuously adjustable from 80° to

155°

120

°

B1

* valid for 30° tilt to horizontal

83 + 0.87 x H1*

10

H6

(H1

+ 11)

H2 (H1 + 44)

H1

H3 (H1

H4 (H1

– 8)

– 33)

H5 (H1 + 36)

52

CP 6053.XXX: M5

CP 6058.XXX: M4

110

Max. installation depth

4"/100 mm

Minimum width of front panel (W1):

depending on

• installation depth of operator housing

• with or without keyboard housing

• position of support arm connection

0

2.5

Keyboard housing

1

without and

2

with

0

2.3 Position of support arm connection

0

to

8

top, bottom or rear side

1 4

7

8

top or from the rear side

2 3 5 6

bottom

Installation depth of operator housing

2"/

50 mm

160

(265)

378*

4"/100 mm

Minimum width of front panel (mm)

150

339*

6"/150 mm

() Bracket values:

* Smaller width of front panels by asymmetric support arm connection is possible on request.

150

339*

HMI 75 HMI 76

13599-IBG-OpInt-HMI.fpo 8/27/01 10:43 AM Page 78

Technical Specifications

CP-Vertical Pendant Arm Systems

INVERTED

Universal

Arms

Designed for increased flexibility. Mounting method can be easily configured based on user requirements.

Vertical

Extensions

Lowers enclosure by dimension “H”.

CP-Vertical Pendant Arm Specifications

Part No.

Description Max. Vertical T1 T2 T3 Length Height Base load travel T (L) (H) plate

9967987

Post top / CP-V 100 lbs 13" – – 5.6" 22.25"

9967988

Post top / CP-VL 75 lbs 23" 5.9" 17.1" 6.3" 28"

9967989

Post top / CP-VXL 50 lbs 30" 7.4" 22.6" 8.7" 35"

9967993

Wallmount / CP-V 100 lbs 13" – – 5.6" 22.25"

9967994

Wallmount / CP-VL 75 lbs 23" 5.9" 17.1" 6.3" 28"

9967995

Wallmount / CP-VXL 50 lbs 30" 7.4" 22.6" 8.7" 35"

9967996

Machine top / CP-V

9967997

Machine top / CP-VL

100 lbs

75 lbs

13"

23"

– – 5.6"

5.9" 17.1" 6.3"

22.25"

28"

9967998

Machine top / CP-VXL 50 lbs 30" 7.4" 22.6" 8.7" 35"

9967999

Universal mount / CP-V 100 lbs 13" – – 5.6" 22.25"

9968000

Universal mount / CP-VL 75 lbs 23" 5.9" 17.1" 6.3" 28"

9968001

Universal mount / CP-VXL 50 lbs 30" 7.4" 22.6" 8.7" 35"

HMI 77

Post Top Arms

Attaches to a plain end 3.5" OD tube or pipe. Cables exit through tube.

Wallmount

Arms

Courtesy of Steven Engineering , Inc.

! 230 Ryan Way, South San Francisco, CA 94080-6370 ! Main Office: (650) 588-9200 ! Outside Local Area: (800) 258-9200 ! www.stevenengineering.com

Attaches to a vertical surface with

5.3" H x 6.0" W mounting plate with

4 (.5") Ø hole pattern on 4.75" H x 3.50" W centers. 2.0" Ø hole through center for cable exit. 2.5" NPS threaded opening as alternate cable exit.

4”, 8”, or 12”

Machine

Top Arms

Attaches to horizontal surface with

5" x 5" mounting plate with 4 (.37") Ø hole pattern on 3.54" centers. 1.5" Ø hole through center for cable exit.

6”, 12”, 18”, or 24”

Horizontal

Extensions

Increases overall length by dimension “L”.

18” or 24”

UNIVERSAL AS

MACHINE TOP

UNIVERSAL AS

WALLMOUNT

UNIVERSAL AS

POST TOP

Jointed

Extension Arms

Increases overall length by dimension “L” and adds additional swivel joint, providing in-out motion.

74”/79”

36”

TALL

SHORT

Floor Posts

36", 74", or 79" tall,

3.5" x .25" OD post with square base plate. 1.5" NPT female coupling near base can be used for cable entry. Post can be easily shortened.

Note:

When using jointed extension arms, a 79" tall post should be used.

Technical Specifications

CP-Vertical Pendant Arm Systems

CP-Vertical Travel

CP-V

5"

T3

T

TRAVEL

5"

CP-VL/CP-VXL

T3

T1

HORIZONTAL

T

TRAVEL

T2

LENGTH L

3.5" 3.0"

CP-Vertical Mounting Dimensions

Machine Top Universal Mounting

.53" Ø

(4) PLACES

6.4"

Post Top Mounting

.8"

Machine Top Mounting

6.4"

4.5"

6.0"

1.4" Ø

CABLE EXIT

4.5"

Wallmount Universal Mounting

.53" Ø

(4) PLACES

6.4"

3.5"

TOP

OF

PIPE

5.0"

3-1/2" OD TUBE

(OR) 3" PIPE

(PLAIN END)

4.8" Ø

CIRCUMFERENCE

2.0"

5.0"

5.0"

3.54"

1.4" Ø

CABLE EXIT

3.54"

3/8" Ø

(4) PLACES

6.4"

4.5"

COVER

PLATE

Wallmount Mounting

1.4" Ø

CABLE EXIT

6.0"

1.4" Ø

CABLE EXIT

4.0"

1.4" Ø

CABLE EXIT

Post Universal Mounting

.8"

4.5"

TOP OF PIPE

Floor Post Plates

5.0"

3-1/2" OD TUBE

(OR) 3" PIPE

(PLAIN END)

12"

5.75"

12"

.68" Ø

(4) PLACES

10"

5.3"

.53" Ø

(4) PLACES

4.75"

3.5"

2.2"

10"

8"

.50" Ø

(4) PLACES

3" Ø ALTERNATE

CABLE ACCESS

2-1/2" NPT ALTERNATE CABLE EXIT

(THREADED CAP SUPPLIED)

8"

6"

3" Ø ALTERNATE

CABLE ACCESS

Enclosure Mounting Coupling

M6

4.5"

3.23"

4.41"

6"

1.82" Ø CABLE

PASSAGE

HMI 78

13599-IBG-OpInt-HMI.fpo 8/27/01 10:43 AM Page 80

Courtesy of Steven Engineering , Inc.

! 230 Ryan Way, South San Francisco, CA 94080-6370 ! Main Office: (650) 588-9200 ! Outside Local Area: (800) 258-9200 ! www.stevenengineering.com

Technical Specifications

CP Pendant Arm Enclosures

6534000-6538000

180

135 40

B5

198 – 203

15

Ø

82

B1

B4

Ø

7

B7

B6

B3

B2

6530200-6533200/6540200

10

8 x 12.5

Ø 4.6

B4

20

B1

Ø

7

Ø

82

B3

35

B2

Part No.

6540200

6534000

6535000

6536000

6537000

6538000

6531200

6530200

6533200

6532200

H1

200

200

300

300

400

400

300

380

380

500

Height dimensions

H2 H3

250

205

305

305

405

405

250

330

330

450

52.5

122

250

250

350

330

62.5

52.5

52.5

62.5

Dimensions in millimeters (mm) unless otherwise indicated.

255

355

355

175

H4

95

155

255

275

275

375

HMI 79

400

300

400

380

B1

300

300

300

380

600

500

Enclosure

330

330

550

450

338

438

338

438

Width dimensions

B2 B3

250

338

340

258

258

358

258

358

420

420

640

540

295

215

295

340

B4

260

260

215

340

560

460

Depth

D

155

180

180

180

180

180

210

210

210

210 lbs

9.9

22.0

26.2

29.1

29.1

30.8

22.3

18.3

32.9

28.7

Weight kg

4.5

10.0

11.9

13.2

13.2

14.0

10.1

8.3

14.9

13.0

Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement