pl_frico_adcs_gb

pl_frico_adcs_gb
Corinte
Corinte
Design air curtain for exclusive entrances, with intelligent control
•Horizontal mounting
- Recommended installation height 3 m*
- Lengths ADCS: 1,7 and 2,2 m
- Lengths ACCS: 1, 1,5, 2, 2,5 and 3 m
•Vertical mounting
- Recommended installation width 5 m*
(2 units), one on each side
- Lengths ADCS: 2,2 and 2,5 m
- Lengths ACCS: 2, 2,5 and 3 m
1Ambient, no heat
3Electrical heat ADCS: 15–22,5 kW
3Electrical heat ACCS: 9–23 kW
2Water heat WH, WL
R
Application
Corinte is intended for exclusive shop
entrances and other environments with high demands in
respect of design and soundlevel. Mounted with one unit on
either side of the opening, thus creating a classic symmetry,
the curtain effect and comfort is optimized.
The air curtain has many intelligent and energy saving
features which provide fully automatic protection for the
entrance, adaptable to each area of use.
Design
Corinte is a stylish and exclusive, stainless steel air curtain
for horizontal or vertical installation. Corinte is available in
two models; ADCS and ACCS that have varying dimensions
and performance. The product key offers many options for
the design and finish of both models.
Optimized airflow with
Thermozone technology.
Air velocity profile
Product specifications
m
m
0,1
ADCS
ACCS
9,6 m/s
m/s
11,0 m/s
m/s
0,5
6,5 m/s
m/s
6,1 m/s
m/s
1,0
4,8 m/s
m/s
4,6 m/s
m/s
1,5
4,1 m/s
m/s
3,9 m/s
m/s
2,0
3,7 m/s
m/s
3,6 m/s
m/s
2,5
3,4 m/s
m/s
3,3 m/s
m/s
3,0
3,1 m/s
m/s
3,0 m/s
m/s
• Prepared for the SIRe control system whose preprogrammed default settings and many features make it
easy to install and use the air curtain. Read more about
the SIRe controls package in the "Controls" section.
• Customised production based on the product key.
• Available for horizontal or vertical mounting.
• For vertical mounting, electricity and/or water may be
connected from above or below.
• Available in polished, mirror-polished or brushed
stainless steel. Colour intake and outlet grille: black,
RAL 9005.
Measurements according to ISO 27327-1. Average
values for products in the series.
2013-05-19
*) Recommended installation height and width varies depending on the relevant premises.
Corinte ADCS
ADCS
•Horizontal mounting
- Recommended installation height 3 m*
- Lengths: 1,7 and 2,2 m
•Vertical mounting
- Recommended installation width 5 m*
(2 units), one on each side
- Lengths: 2,2 and 2,5 m
1Ambient, no heat
3Electrical heat: 15–22,5 kW
2Water heat WH, WL
Corinte is available in two versions; ADCS and ACCS. Read more about ACCS in the end of this section.
*) Recommended installation height and width varies depending on the relevant premises.
Corinte ADCS
Technical specifications
1Ambient, no heat - ADCS A
Type
Output
[kW]
ADCS17A*¹
0
Outputmotor
[W]
Voltage
motor
[V]
Amperage
motor
[A]
Length
[m3/h]
Sound
level*3
[dB(A)]
[mm]
[kg]
1400/3000
40/60
670
230V~
2,9
1700
73
Airflow*3
Weight
ADCS22A
0
1800/4000
42/61
990
230V~
4,3
2200
95
ADCS25A*²
0
2050/4500
43/63
1150
230V~
5,0
2450
108
3Electrical heat - ADCS E
Type
Output
steps
[kW]
Airflow*3
[m3/h]
ADCS17E*¹
7,5/15
1400/3000
∆t*4
Outputmotor
[W]
Voltage
motor
[V]
Amperage
motor
[A]
Voltage [V]
Amperage [A]
(heat)
Length
[°C]
Sound
level*3
[dB(A)]
[mm]
[kg]
32/15
40/60
670
230V~
2,9
400V3~/21,7
1700
73
Weight
ADCS22E
10/20
1800/3600
33/15
42/61
890
230V~
3,6
400V3~/28,9
2200
95
ADCS25E*²
11,2/22,5
2050/4100
33/15
43/63
1080
230V~
4,3
400V3~/32,5
2450
108
2Water heat - ADCS WH, coil for high temperature water (580 °C)
Type
Output*5 Airflow*3
[kW]
[m3/h]
ADCS17WH*¹
22,5
1400/3000
∆t*4,5
Sound
level*3
[dB(A)]
Outputmotor
[W]
Voltage
motor
[V]
Amperage
motor
[A]
Length
[°C]
Water
volume
[l]
[mm]
[kg]
29/22
2,8
39/59
670
230V~
2,9
1700
85
Weight
ADCS22WH
29,3
1800/4000
29/22
3,6
42/60
990
230V~
4,3
2200
110
ADCS25WH*²
34,3
2050/4500
30/22
4,0
42/61
1150
230V~
5,0
2450
125
Weight
2Water heat - ADCS WL, coil for low water temperature (480 °C)
Type
Output*6 Airflow*3
ADCS17WL*¹
∆t*4,6
[kW]
[m3/h]
[°C]
Water
volume
[l]
17,3
1400/3000
22/17
2,8
Sound
level*3
[dB(A)]
Outputmotor
[W]
Voltage
motor
[V]
Amperage
motor
[A]
Length
[mm]
[kg]
39/59
670
230V~
2,9
1700
85
ADCS22WL
24,5
1800/4000
23/18
3,6
42/60
990
230V~
4,3
2200
110
ADCS25WL*²
28,0
2050/4500
24/18
4,0
42/61
1150
230V~
5,0
2450
125
*1) Available only for horizontal mounting.
*2) Available only for vertical mounting.
*3) Lowest/highest airflow of totally 5 fan steps.
*4) Conditions: Distance to the unit 5 metres. Directional factor: 2. Equivalent absorption area: 200 m². At lowest/highest airflow.
*5) ∆t = temperature rise of passing air at maximum heat output and lowest/highest airflow.
*6) Applicable at water temperature 80/60 °C, air temperature, in +18 °C.
*7) Applicable at water temperature 60/40 °C, air temperature, in +18 °C.
CE compliant.
Protection class: IP20.
Product key
Type - Unit shape - Connections position - Finish / Material
Example: ADCS22WL - VL - A - P
Type
See technical specifications
Unit shape
HL (Horizontal, connections to the left),
HR (Horizontal, connections to the right),
VL (Vertical Left) or VR (Vertical Right)
Connections
position
A or B, see figure.
Finish / material
P = Polished bright annealed
B = Brushed stainless steel
MP = Mirror polished stainless steel
Connections position
Design and specifications are subject to change without notice.
HL
HR
A
A
B
B
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement