Quick Reference Guide (Download PDF, 2.54M)

Quick Reference Guide (Download PDF, 2.54M)
2013 Infiniti M Hybrid
Quick Reference Guide
Behind
steering
wheel
Behind
steering
wheel
01
04
02
06
07
08
09
10
11
12
Behind
steering
wheel
13 14 15
22
05
03
23
16
17
24
18 19 20
21
25
26
25
01 Adaptive Front Lighting System (AFS) Switch*
14 rear sonar system off switch
02 Instrument Brightness Control SwitchES*
15 WARNING SYSTEMS switch
03 dot matrix liquid crystal display*
16 Tilt / Telescopic Steering Wheel Switch*
04 TRIP RESET SWITCH*
17 Intelligent Brake Assist (IBA) Switch*
05 TRIP COMPUTER SWITCHES
18 Rear Sunshade Switch*
06 Headlight and Turn Signal Switch
19 heated Steering wheel Switch*
07 ASSIST CHARGE GAUGE
20 Trunk Lid Release Switch
08 EV INDICATOR LIGHT
21 Hood Release*
09 Windshield Wiper and Washer Switch
22 control panel display screen
10 Steering Wheel Switches for Audio / Bluetooth®
23 Climate control system
11 Cruise Control
24 audio system
12 DYNAMIC DRIVER ASSISTANCE SWITCH*
25 Climate Controlled Seat Switch*
13 Vehicle Dynamic Control (VDC) Off Switch*
26 Infiniti Drive Mode Selector*
*See your Owner’s Manual for information.
table of contents
new system features
Approaching Vehicle Sound for Pedestrians (VSP) System . . . . . . . . . . . . . . 2
Rear Sonar System (if so equipped) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
INFINITI Connection™ System (if so equipped) . . . . . . . . . . . . . . . . . . . . . . 2
Automatic Anti-glare Mirrors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Forest Air ® System (if so equipped) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Blind Spot Warning (BSW) and Blind Spot Intervention™ (BSI)
(if so equipped) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
ECO Pedal System (if so equipped) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
essential information
Direct Response Hybrid™ System Warning Light . . . . . . . . . . . . . . . . . . . . . . 6
Hybrid Awareness . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Loose Fuel Cap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Tire Pressure Monitoring System (TPMS) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Infiniti Drive Mode Selector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Warning Systems Switch (if so equipped) . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Accessing the Front Cup Holders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
first drive features
INFINITI Intelligent Key™ System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Trunk Lid Release . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Seat Adjustments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Automatic Drive Positioner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Outside Mirror Control Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Assist Charge Gauge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Starting/Stopping the Hybrid System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Headlight Control Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
Windshield Wiper/Washer Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Automatic Climate Controls (if so equipped) . . . . . . . . . . . . . . . . . . . . . . . . 15
FM/AM/SiriusXM™ Satellite Radio with CD/DVD Player (if so equipped) . . . . 17
USB/iPod® Interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Conventional (Fixed Speed) Cruise Control . . . . . . . . . . . . . . . . . . . . . . . . . 18
Intelligent Cruise Control (ICC) System (if so equipped) . . . . . . . . . . . . . . 18
Fuel-Filler Door . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
system guide
Trip Computer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Bluetooth® Hands-free Phone System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
System Operating Tips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Bluetooth® System with Navigation (if so equipped) . . . . . . . . . . . . . . 21
Bluetooth® System without Navigation (if so equipped) . . . . . . . . . . . .23
Navigation System (if so equipped) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
DVD Player (if so equipped) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
HomeLink® Universal Transceiver . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
• A cellular telephone should not be used for any purpose while driving so full attention may be given to vehicle operation.
• Always wear your seat belt.
• Supplemental air bags do not replace proper seat belt usage.
• Children 12 and under should always ride in the rear seat properly secured in child
restraints or seat belts according to their age and weight.
• Do not drink and drive.
For more information, refer to the “Safety –– Seats, seat belts and supplemental
restraint system (section 1)”, “Monitor, climate, audio, phone and voice recognition
systems (section 4)” and “Starting and driving (section 5)” of your Owner’s Manual.
Additional information about your vehicle is also available in your Owner’s Manual,
Navigation System Owner’s Manual and at www.InfinitiUSA.com.
new s yste m fea tu res
Approaching Vehicle Sound for Pedestrians (VSP) System
The VSP system helps alert pedestrians to the presence of the vehicle when it is being driven
at a low speed.
When the vehicle starts to move, it produces a sound. The sound stops when the vehicle speed
reaches approximately 19 MPH (30 km/h) while accelerating.
This sound will activate again when decelerating to a speed less than 16 MPH (25 km/h).
For more information, refer to the “Hybrid System Overview” section of your Owner’s Manual.
Rear Sonar System (if so equipped)
With the shift lever in the R (REVERSE) position, this
system will sound a tone and the sonar indicator 01
will appear in the front display to alert you to
obstacles within up to 3.9 feet (1.2 m) from the
bumper with a decreased coverage area at the
outer corners of the bumper.
01
The system tones faster as the vehicle gets closer to
the obstacle. A continuous tone sounds when an
obstacle is less than 11.8 in (30 cm) from the bumper.
02
Turn the system off by pushing the Rear Sonar System
off switch 02 . Push the switch again to activate
the system.
For more information, refer to the “Starting and driving (section 5)” of your Owner’s Manual.
INFINITI Connection™ System* (if so equipped)
Infiniti Connection provides various types of information
and services by connecting your vehicle to the Infiniti
Connection Data Center. For more details on the Infiniti
Connection service, terms and conditions, please refer
to www.Infiniticonnection.com.
Available services include:
Infiniti Personal Assistant – To access Infiniti Personal
Assistant, select “Connect to Voice Menu” from the Infiniti Connection menu or touch the
key (if available on the map screen). At the voice prompt, say “Infiniti Personal Assistant” to
be connected.
• Your Infiniti Personal Assistant can send destination information directly to your vehicle.
To access, go to the Infiniti Connection menu and select “Sync All Information Feeds”.
Then go to the feeds menu page and download the desired destination information.
Automatic Collision Notification – In case of air bag deployment, a signal is sent containing
the vehicle location and customer information to notify the proper authorities.
*Infiniti Connection™ is only available on vehicles equipped with optional Infiniti Connection™ subscription service.
2
Emergency Call (if so equipped) – This service provides emergency assistance by connecting
subscriber to an Infiniti Connection Specialist.
• In case of an emergency, press the in-vehicle
telematics SOS button 01 .
• A Response Specialist will provide assistance based
on the situation described by the vehicle’s occupant.
Enhanced Roadside Assistance (if so equipped) –
Roadside Assistance can be accessed by touching
the Infiniti Connection key on the Info menu, the
key (if available on the map screen) or by pressing the SOS button.
01
• This service allows subscribers to receive assistance for a non-emergency incident such as
towing or a third party response.
• If warranted, Roadside Assistance may also be used in conjunction with the Emergency
Assistance service by pressing the SOS button.
My Schedule – Access your personal online Google Calendar™, hear details read via text-to speech** and select locations as a destination via the navigation system.
Report Stolen Vehicle – A Response Specialist will attempt to obtain location information
from a reported stolen vehicle and provide that information to local law enforcement agencies
to assist in the recovery of your stolen vehicle.
Remote Door Lock/Unlock – Remotely access your vehicle via Infiniti Connection Response
Specialist or designated website to remotely lock or unlock your vehicle.
Alarm Notification – This system will notify you when the factory-installed vehicle alarm
system has been activated.
Scheduled Maintenance Notification – Receive scheduled maintenance notifications based
on mileage data provided by your vehicle.
Maintenance Alert – Receive notification of a vehicle system malfunction that triggers
instrument panel warning lights.
Destination Assistance – Receive point-of-interest assistance via guided IVR (Interactive
Voice Response), Response Specialist or Infiniti Connection web portal.
Destination Send-to Vehicle – Find and download point-of interest information from
GoogleMaps™.
Connected Search – Select “Connected Search” from the Destination menu on the vehicle’s
navigation system to conduct a point-of-interest search within a certain distance of the
vehicle’s location.
Drive Zone – Monitor the movement of your vehicle within a specified region. Set up boundaries
in the Monitoring section of the Infiniti Connection web portal.
Max Speed Alert – Set up a maximum speed on the Infiniti Connection web portal. You will
receive notifications if your vehicle exceeds the max speed setting.
Mobile Information Service (if so equipped) – Receive the latest news headlines, stock
quotes and sports scores by setting up preferences on the Mobile Information Service page
in the Infiniti Connection web portal.
**Laws in some communities may restrict the use of text-to-speech. Check local regulations before using this feature.
3
new s yste m fea tu res
Valet Alert – Use Valet Alert to set up a 0.2 mile radius around your vehicle.
• A
ctivate alerts by pressing the “Connect to Voice Menu” button on the Infiniti Connection
screen or by pressing the
key on the map screen.
• At the prompt, say “Valet Alert” and then “Activate” or “Deactivate”.
For more information, refer to the “Viewing technical information (section 7)” of your Navigation System Owner’s Manual.
Automatic Anti-glare Mirrors
The inside rearview mirror and both outside mirrors are designed to automatically change
reflection according to the intensity of the headlights of the vehicle following you.
The anti-glare system will be automatically turned on when the ignition switch is in the ON position.
For more information, refer to the “Pre-driving checks and adjustments (section 3)” of your Owner’s Manual.
Forest Air® System (if so equipped)
This system helps keep the air inside your vehicle
clean using an automatic air intake and ventilation
system that monitors air quality with outside and
inside sensors.
Automatic humidity control prevents over-drying of
the passenger compartment and fogging of the
windshield. When the system is ON, the defroster
may automatically turn on.
For more information, refer to the “Monitor, climate, audio, phone and voice recognition systems (section 4)” of your Owner’s Manual.
Blind Spot Warning (BSW) and Blind Spot Intervention™ (BSI) (if so equipped)
The Blind Spot Warning (BSW) system alerts the
driver when another vehicle moves into the vehicle’s
blind spot area.
01
An indicator light 01 near the driver’s outside mirror
will illuminate if the radar sensors detect a vehicle in
the detection zone.
The Blind Spot Intervention™ (BSI) system can assist
the driver in returning the vehicle to the center of the
traveling lane by applying individual brake pressure
to the left or right wheels for a short period of time.
02
The indicator light 02 will first illuminate in orange and
then turn green before turning off. This indicates that
the Blind Spot Warning (BSW) and Blind Spot Intervention (BSI) systems are operational.
For more information, refer to the “Starting and driving (section 5)” of your Owner’s Manual.
4
ECO Pedal System (if so equipped)
With the Infiniti Drive Mode Selector switch 01 in
the ECO Mode, the ECO pedal system assists the
driver in improving fuel economy.
The ECO pedal system applies force to make the
accelerator pedal heavier depending on the
accelerator pedal operation.
01
For more information, refer to the “Starting and driving (section 5)” of your
Owner’s Manual.
5
essent ial i n fo r ma t i o n
Direct Response Hybrid™ System Warning Light
This light will illuminate when the ignition switch is in
the ON position and will turn off when the hybrid
system is started.
The light will also illuminate when a malfunction
occurs in the electric motor or hybrid system.
When this light illuminates while driving, immediately
stop the vehicle in a safe location and contact an INFINITI retailer.
If the hybrid system warning light blinks while driving, it may indicate that the Li-ion battery
charge is low and you cannot continue to drive.
Do not allow the vehicle to coast when the Li-ion battery is low or when the hybrid system
warning light blinks while driving. The engine will not automatically start to charge the Li-ion
battery while the vehicle is coasting.
For more information, refer to the “Instruments and controls (section 2)” of your Owner’s Manual.
Hybrid Awareness
Your vehicle is virtually silent in the electric mode. If you exit your vehicle while it is ON, but the
engine is not running, the engine will automatically start, informing you that the car is still ON.
Do not store your INFINITI Intelligent Key™ within detection range of the vehicle. This may
cause welcome lights and other functions to activate creating unwanted battery drain.
The hybrid system is designed for optimum efficiency and performance. The electric mode
may vary with driving conditions and driver input. A full battery display does not indicate the
vehicle should be in the electric mode.
For more information, refer to the “Hybrid System Overview” section of your Owner’s Manual.
Loose Fuel Cap
A LOOSE FUEL CAP warning message will appear in the
dot matrix liquid crystal display 01 when the fuel filler cap is not tightened correctly.
To tighten, turn the cap clockwise until a single click
is heard.
01
The warning message will disappear when the vehicle
detects the fuel-filler cap is properly tightened and the
reset button 02 is pressed for more than 1 second.
If the cap is not properly tightened, the Malfunction
Indicator Light
may illuminate.
For more information, refer to the “Instruments and controls (section 2)” and
the “Pre-driving checks and adjustments (section 3)” of your Owner’s Manual.
02
6
Tire Pressure Monitoring System (TPMS)
A Check tire pressure warning message will
appear in the dot matrix liquid crystal display 01
and the low tire pressure warning light 02 will
illuminate when one or more tires are low on
pressure and air is needed.
•
01
The tire pressures should be checked when the
tires are cold. The tires are considered cold after
the vehicle has been parked for 3 hours or more or
driven less than 1 mile (1.6km) at moderate speeds.
After tire pressures are adjusted, drive the vehicle
at speeds above 16 MPH (25km/h). The Check tire
pressure warning message and low tire pressure
warning light will disappear.
When the low tire pressure warning light flashes
for 1 minute and then remains on, the TPMS is not
functioning properly. Have the system checked by
an INFINITI retailer.
Tire pressure rises and falls depending on the heat caused by the vehicle’s operation and the
outside temperature. Low outside temperature can lower the temperature of the air inside the
tire, which can cause a lower tire inflation pressure. This may cause the low tire pressure
warning light to illuminate. If the warning light illuminates in low ambient temperature, check
the tire pressure in your tires.
• Check the tire pressure (including the spare tire) often and always prior to long distance trips.
02
The Tire and Loading Information label contains valuable information. Please refer to section 9,
“Technical and consumer information”, in your Owner’s Manual for the location of the Tire and
Loading Information label.
For more information, refer to the “Instruments and controls (section 2)”, “Starting and driving (section 5)” and the “Maintenance
and do-it-yourself (section 8)” of your Owner’s Manual.
Infiniti Drive Mode Selector
Turn the switch to the following position to select the
corresponding drive mode:
01 Standard (•) - For standard or normal driving.
04
01
02
03
02 SPORT - The engine and transmission will adjust,
resulting in higher engine rpm and a more aggressive
shift pattern. In this mode, fuel economy may be reduced.
03 SNOW – Used on snowy roads or slippery areas. In this mode, engine output is controlled to
avoid wheel spin.
04 ECO – Adjusts engine and transmission points to enhance fuel economy.
For more information, refer to the “Starting and driving (section 5)” of your Owner’s Manual.
7
essent ial i n fo r ma t i o n
Warning Systems Switch (if so equipped)
The warning systems switch 01 will turn the Lane
Departure Warning (LDW), Blind Spot Warning (BSW)
and Forward Collision Warning (FCW) systems on or off.
01
When the warning systems switch is turned off, the
indicator 02 on the switch is off. If the warning
systems switch is illuminated, the system is on. The
indicator will also be off if all of the warning systems
are deactivated using the settings menu.
02
03
To enable or disable these systems, perform the
following operation:
1.Press the SETTING button 03 on the control panel.
04
06
2.Using the INFINITI Controller 04 , highlight the
“Driver Assistance” key 05 on the display. Then
press the ENTER button 06 .
05
3. Highlight the corresponding warning system key
07 , select ON (enabled) or OFF (disabled) and
press the ENTER button.
07
For more information, refer to the “Starting and driving (section 5)” of your
Owner’s Manual.
Accessing the Front Cup Holders
To open the cup holders, push the lid 01 down and
release.
For more information, refer to the “Instruments and controls (section 2)” of
your Owner’s Manual.
01
8
f i rst d r i ve features
INFINITI Intelligent Key™ System
The INFINITI Intelligent Key™ system allows you to
lock or unlock your vehicle, open your trunk and start
the engine.
01
NOTE: It is important to make sure the Intelligent Key is
with you (that is, in your pocket or purse).
T he operating range of the Intelligent Key is within
31.5 in (80 cm) from each request switch.
To lock the vehicle, push either door handle request
switch 01 once or press the button 02 on the keyfob.
To unlock the vehicle, perform one of the following procedures:
•Push either door handle request switch 01 once; the corresponding
door will unlock. Push the door handle request switch 01 again within
1 minute; all other doors will unlock, or
•Press the
Press the
02
03
04
05
button 03 on the keyfob to unlock the driver’s side door.
button again; all other doors will unlock.
To open the trunk, press the
button 04 for more than 1 second.
The Intelligent Key can also be used to activate the panic alarm by pressing
and holding the button 05 for more than 1 second. Once activated, the
panic alarm and headlights will stay on for 25 seconds.
INTELLIGENT KEY BATTERY DISCHARGE
If the battery of the Intelligent Key is discharged, or
environmental conditions interfere with the Intelligent
Key operation, start the engine according to the
following procedure:
1. Move the shift lever to the P (Park) position.
2. Firmly apply the foot brake.
3. Touch the ignition switch with the Intelligent Key and a chime will sound.
4. Within 10 seconds after the chime sounds, push the ignition switch while depressing the
brake pedal and the engine will start.
For more information, refer to the “Pre-driving checks and adjustments (section 3)”, “Starting and driving (section 5)” and
the “Maintenance and do-it yourself (section 8)” of your Owner’s Manual.
9
f irst dr i ve fea tu res
Trunk Lid Release
Use one of the following methods to unlatch the trunk lid,
then lift the lid to open the trunk:
Push the trunk open request switch 01 under the
trunk handle while carrying the INFINITI Intelligent
Key™ with you.
01
Press the
button 02 on the Intelligent Key for
HOLD
more than one second.
02
From inside the vehicle, push the trunk lid release
switch 03 .
For more information, refer to the “Pre-driving checks and adjustments
(section 3)” of your Owner’s Manual.
03
Seat Adjustments
To slide the seat forward or backward, push the control 01 forward or backward .
switch
To recline the seatback, push the switch
forward or backward.
02
SEAT LIFTER
01
02
03
To adjust the angle of the front seat cushion or height
of the seat, push the front or rear end of the switch
01 up or down.
LUMBAR SUPPORT (if so equipped)
To adjust the seat lumbar support, push the front or back end of the switch
03 .
For more information, refer to the “Safety —— seats, seat belts and supplemental restraint system (section 1)” of your
Owner’s Manual.
10
Automatic Drive Positioner
Two positions for the driver’s seat, steering column
and outside mirrors can be stored in the automatic
drive positioner 01 memory.
01
Follow these procedures to set the memory positions:
• Confirm the shift lever is in the P (PARK) position.
• Push the ignition switch to the ON position.
• Adjust the driver’s seat, steering column and outside mirrors to the desired positions using
the adjusting switches for each feature.
• Push the SET switch and within 5 seconds, push the memory switch (1 or 2) for at least
1 second.
• The indicator light on the memory switch you select will illuminate for approximately 5 seconds.
• The driver’s seat, steering column and outside mirror positions are now set to your preference.
These memorized positions can also be linked to your INFINITI Intelligent Key™.
For more information, refer to the “Pre-driving checks and adjustments (section 3)” of your Owner’s Manual.
Outside Mirror Control Switch
To select the right or left side mirror, move the control
switch 01 right or left.
03
Adjust each mirror to the desired position using the
switch 02 .
02
01
To fold the outside rearview mirrors, push the switch
03 to the
position. To unfold the outside
rearview mirrors, push the switch 03 to the
position.
REVERSE TILT-DOWN FEATURE
When backing up the vehicle, the right or left outside mirror can be selected to automatically
turn downward.
1.Push the ignition switch to the ON position.
2. Move the shift lever to the R (REVERSE) position.
3.Choose the right or left outside mirror by operating the outside mirror control switch 01 .
4.The outside mirror surfaces move downward.
When one of the following conditions has occurred, the outside mirror surfaces will return to
their original positions.
• The shift lever is moved to any position other than R (REVERSE).
• The outside mirror control switch is set to the center “neutral” position.
• The ignition switch is pushed to the OFF position.
For more information, refer to the “Pre-driving checks and adjustments (section 3)” of your Owner’s Manual.
11
2013 Infiniti M Hybrid Delivery Checklist
Bluetooth® Hands-free Phone System
1. Connect the customer’s phone
Yes
2. Explain voice tagging
3. Identify microphone location
4. Explain how to dial a number
5. Explain how to receive and end a call
Bluetooth®
Controls
Audio System
Demonstrate
1. How to tune in to the next broadcast station and skip to the next category (if so equipped) or CD track
2. How to store a radio station in a preset
3. How to scan the broadcast stations
Yes
Seat Adjustments
Demonstrate
1. How to move the seat forward, backward, up and down
2. How to recline the seat
3. How to adjust the lumbar support
Yes
Automatic Drive Positioner (if so equipped)
Demonstrate
1. Storing seat, outside mirrors and steering column to desired positions in
memory buttons 1 & 2
2. Linking the INFINITI Intelligent Key™ to the stored memory positions
Yes
Windshield Wiper/Washer Switch
Demonstrate
Yes
01 MIST (one sweep) function
03
MIST 01
02 Rain-sensing auto (AUTO) wiper function
03 Time delay adjustment ring
OFF
AUTO 02
04 Low (LO) speed wiper function
05 High (HI) speed wiper function
LO 04
HI 05
06 Washer function
06
2013 Infiniti M Hybrid Delivery Checklist
Headlight Control
Yes
01 Activate the front parking, side marker, 03
06
01
tail and license plate lights
02
02 Activate the headlights
03 Activate the Autolight System
04
04 Activate the high beams
05
05 Flash the high beams
06 Activate the fog lights
Heating, Ventilation and Air Conditioning
Demonstrate
Yes
1. Climate button 2. Fan Speed control
3. Mode control
4. A/C function
5.Defrost and Defog operation (include recirculation button)
Cruise Control
Yes
1. Activate cruise control
2. Set cruise control
3. Reset at a faster cruising speed
4. Reset at a slower cruising speed
5. Cancel cruise control
6. Turn off cruise control
Owner’s SignatureDate
Sales Consultant’s SignatureDate
Sales Manager’s SignatureDate
All information, specifications, photographs and illustrations are those in effect at the time of printing. Infiniti
reserves the right to change specifications or design without notice and without obligation. For additional
information, see your Infiniti retailer or contact Nissan North America, Inc. See your Owner’s Manual for
important warnings and details on vehicle operation and maintenance.
QR3E HY51U0
Printing: April 2012 (03)
Printed in USA
f irst dr i ve fea tu res
Assist Charge Gauge
This meter displays the condition of the electric motor.
When the needle is between the center and PWR 01 , this indicates that the electric motor is providing
power to the drive wheels and the Li-ion battery is
discharging.
When the needle is between the center and CHG 02 ,
this indicates that the electric motor is generating
power to recharge the Li-ion battery.
01
02
For more information, refer to the “Hybrid System Overview” section and the “Instruments and controls (section 2)” of your
Owner’s Manual.
Starting/Stopping the Hybrid System
Depress the brake pedal.
Press the ignition switch START/STOP button to start
the hybrid system.
The ready to drive indicator light 01 will illuminate
in the meter and you may begin driving the vehicle.
NOTE: It is important to make sure the INFINITI Intelligent
Key™ is with you (that is, in your pocket or purse).
TURNING THE HYBRID SYSTEM OFF
Move the shift lever to the P (PARK) position and
apply the parking brake.
Press the ignition switch START/STOP button to
turn the hybrid system off.
01
EMERGENCY ENGINE SHUT OFF
To shut off the engine in an emergency situation while driving, perform one of the following procedures:
Rapidly push the push-button ignition switch 3 consecutive times, or
Push and hold the push-button ignition switch for more than 2 seconds.
For more information, refer to the “Starting and driving (section 5)” of your Owner’s Manual.
12
Headlight Control Switch
HEADLIGHT CONTROL
Turn the headlight control switch to the
position
01 to turn on the front parking, side marker, tail, license
plate and instrument panel lights. Turn the switch to
the
position 02 to turn on the headlights.
03
01
02
AUTOLIGHT SYSTEM
The autolight system will automatically turn the headlights on when it is dark and off when it is
light. The system will keep the headlights on for a period of time after you turn the ignition off
and all doors are closed.
To activate the autolight system, turn the headlight control switch to the AUTO position 03
then push the ignition switch to ON. To deactivate the autolight system, turn the headlight
01 or
control switch to the OFF,
position 02 .
HIGH BEAM SELECT
Push the headlight control switch forward 04 to
select the high beam function. The blue indicator light
illuminates in the instrument panel. Pull the
headlight switch back to the original position to
select the low beam. The blue indicator light goes off.
04
05
Pull and release the headlight control switch 05 to
flash the headlight high beams on and off.
FOG LIGHT SWITCH
NOTE: The headlights must be on and the low beams
selected for the fog lights to operate.
Turn the switch (inside collar) to the
to turn the fog lights on.
position 06
Turn the switch (inside collar) to the OFF position to
turn the fog lights off.
06
For more information, refer to the “Instruments and controls (section 2)” of
your Owner’s Manual.
13
f irst dr i ve fea tu res
Windshield Wiper/Washer Switch
Move the lever to the following positions to operate
the windshield wipers:
03
01 Mist (MIST) - One sweep operation of the wipers.
MIST 01
02 Auto (Auto) - Operates the rain-sensing wipers
intermittently. The intermittent speed can be
adjusted by twisting the time control ring 03 .
AUTO 02
OFF
LO 04
04 Low (LO) - Wipers operate at a continuous
low-speed.
HI 05
05 High (HI) - Wipers operate at a continuous
high-speed.
06 Pull the lever toward you to activate the washer.
The wipers will operate several times.
06
RAIN-SENSING AUTO WIPER SYSTEM
The rain-sensing auto wiper system can automatically turn on the wipers and adjust the wiper
speed depending on the rainfall and the vehicle speed.
To set the rain-sensing auto wiper system, push the lever down to the AUTO position 02 . The
wiper will sweep once while the ignition switch is in the ON position.
The rain sensor sensitivity level can be adjusted by turning the time control ring 03 toward the
front (high sensitivity) or toward the rear (low sensitivity).
For more information, refer to the “Instruments and controls (section 2)” of your Owner’s Manual.
14
08
03
09
12
07
04
01
10
02
11
05
06
Automatic Climate Controls (if so equipped)
01 AUTO BUTTON
The auto mode may be used year-round. Press the AUTO button to turn the system on
and the system will automatically control the inside temperature (automatic cooling and/
or dehumidified heating), air flow distribution and fan speed.
02 CLIMATE BUTTON
Press the CLIMATE button to adjust your automatic climate controls using the climate
settings on the control panel display screen.
03 DRIVER’S SIDE TEMPERATURE CONTROL BUTTONS
Press the driver’s side temperature control buttons up
for warmer air or down
for cooler air.
04 DRIVER’S SIDE MANUAL AIR FLOW CONTROL BUTTON
Press the driver’s side manual air flow buttons to manually control the driver’s side air
flow modes.
The following air flow indicator modes will display on the control panel display screen:
Air flows from the center and side vents.
Air flows from the center, side and foot vents.
Air flows mainly from the foot vents.
Air flows from the defroster and foot vents.
05 PASSENGER’S SIDE TEMPERATURE CONTROL BUTTONS
To manually adjust the passenger’s side temperature, press the passenger’s side
temperature control buttons up for warmer air or down for cooler air.
06 PASSENGER’S SIDE MANUAL AIR FLOW CONTROL BUTTON
Press the passenger’s side manual air flow buttons to manually control the passenger’s side air flow modes.
The following air flow indicator modes will display on the control panel display screen:
Air flows from the center and side vents.
Air flows from the center, side and foot vents.
Air flows mainly from the foot vents.
Air flows from the defroster and foot vents.
15
f irst dr i ve fea tu res
07 FAN SPEED CONTROL BUTTONS
P
ress the left button to decrease the fan speed or press the right
the fan speed.
button to increase
08 DEFROSTING/DEFOGGING FRONT AND SIDE WINDOWS
Press the defroster control button
to turn the system on. The A/C automatically turns
on when the defroster mode is selected. This feature removes humidity from the air.
To defrost the front and side windows, set the temperature controls 03 and fan speed
controls 07 to their maximum settings.
09 DEFROSTING REAR WINDOW AND OUTSIDE MIRRORS
Push the rear window defroster switch
This function automatically turns off after approximately 15 minutes.
to turn the system on or off.
10 FOREST BUTTON
Press the forest button
to activate the Forest Air® system.
This system’s settings will activate the breeze mode, the outside odor and exhaust gas
detection sensor, the inside air quality sensor and the auto humidity control. The fan
speed and air flow is automatically set to the auto position.
11 INTAKE AIR CONTROL BUTTON
P
ress the intake air control
button to recirculate interior air inside the vehicle.
The
indicator light on the button will illuminate. This system is used to avoid certain
outside odors and helps to adjust the inside vehicle temperature more effectively.
The air recirculation mode cannot be activated when the air conditioner is in the front
defrost mode
.
P
ress the intake air control
air to the outside air. The
button again to change the air circulation from the intake
indicator light on the button will turn off.
12 OFF BUTTON
Press the OFF button to turn the climate control system off.
For more information, refer to the “Monitor, climate, audio, phone and voice recognition systems (section 4)” of your Owner’s Manual.
16
01
02
03
05
06
04
FM/AM/SiriusXM™* Satellite Radio With CD/DVD Player (if so equipped)
01 VOLUME/ON•OFF CONTROL KNOB
Press the VOL/ON•OFF control knob to turn the system on or off. Turn the knob right or
left to increase or decrease the volume.
02 TUNE/FOLDER/AUDIO CONTROL KNOB
To manually tune the radio, turn the TUNE/FOLDER/AUDIO knob left or right.
03 SEEK•CAT/TRACK BUTTONS
To scan quickly and stop at the previous or next broadcast station, press the
end of the SEEK•CAT/TRACK button.
or
F or SiriusXM™ satellite radio, press the
or
end of the SEEK•CAT/TRACK button to
switch to the first channel of the previous or next category.
To change tracks on a CD, press the
To fast forward or rewind a track on a CD, press and hold the
SEEK•CAT/TRACK button.
or
end of the SEEK•CAT/TRACK button.
or
end of the
04 STATION PRESET BUTTONS
Twelve stations can be set for the FM band, six for the AM band and eighteen for SiriusXM
satellite radio.
To store a station in a preset, you must first select a radio band by pressing the FM•AM 05
or XM 06 button, then tune to the desired AM, FM or SiriusXM satellite radio station.
Then press and hold the desired station preset button (1-6) until the preset number is
updated on the display and the sound is briefly muted. The channel indicator will then
display and the sound will resume. Programming is now complete.
To retrieve a previously set station, select the radio band where the preset was stored then
press the corresponding station select button (1-6).
*SiriusXM™ Satellite Radio is only available on vehicles equipped with optional SiriusXM satellite subscription service.
For more information, refer to the “Monitor, climate, audio, phone and voice recognition systems (section 4)” of your Owner’s Manual.
17
f irst dr i ve fea tu res
USB/iPod® Interface
The USB jack 01 is located in the center console under
the arm rest.
When a compatible USB memory device or iPod®
is plugged into the USB jack, compatible
audio and video files stored on the device can
be played through the vehicle’s audio system
and front display.
01
For more information, refer to the “Monitor, climate, audio, phone and voice
recognition systems (section 4)” of your Owner’s Manual.
Conventional (Fixed Speed) Cruise Control
The cruise control system enables you to set a constant
cruising speed once the vehicle has reached 25 mph.
The system will automatically maintain the set speed
until you tap the brake pedal, accelerate, cancel or
turn the system off.
To activate the cruise control, push the ON/OFF
switch 01 . The CRUISE indicator light in the
instrument panel will illuminate.
04
03
01
02
To set cruising speed, accelerate the vehicle to the desired speed, push the COAST/SET switch
02 and release. The CRUISE SET indicator light in the instrument panel will illuminate.
Take your foot off the accelerator pedal. Your vehicle will maintain the set speed.
To reset at a faster cruising speed, push and hold the ACCEL/RES switch 03 . When the
vehicle attains the desired speed, release the switch.
To reset at a slower cruising speed, push and hold the COAST/SET switch 02 . Release the
switch when the vehicle slows to the desired speed.
To cancel the preset speed, push the CANCEL switch 04 .
To turn off cruise control, push the ON/OFF switch 01 . Both the CRUISE indicator light and
the SET indicator light in the instrument panel will turn off.
For more information, refer to the “Starting and driving (section 5)” of your Owner’s Manual.
Intelligent Cruise Control (ICC) System (if so equipped)
VEHICLE-TO-VEHICLE DISTANCE CONTROL MODE
To set Vehicle-To-Vehicle Distance Control mode,
press the CRUISE ON/OFF button 01 for less than
1.5 seconds. The CRUISE indicator light 02 will
illuminate.
08
07
04
03
Accelerate to the desired speed.
Push down on the COAST/SET switch 03 and release
it. Cruise Control will be set to the desired speed.
18
01
Press the distance button 04 repeatedly to change
the set distance between long, middle, and short.
When a vehicle is not detected ahead of you in the
lane, the set distance and set vehicle speed indicator
lights will illuminate 05 in set mode.
02
When a vehicle is detected ahead of you in the lane, the vehicle ahead
detection, set distance, and set vehicle speed indicator lights will
illuminate 06 in set mode.
05
06
To reset at a faster cruising speed, push and hold the ACCEL/RES switch 07 . When the
vehicle attains the desired speed, release the switch.
To reset at a slower cruising speed, push and hold the COAST/SET switch 03 . Release the
switch when the vehicle slows to the desired speed.
To cancel the preset speed, push the CANCEL switch 08 or tap the brake pedal. The set
vehicle speed indicator 05 will go out.
To turn off cruise control, press the CRUISE ON/OFF button 01 . The CRUISE indicator light
02 , in the instrument panel, will turn off.
To set conventional (fixed speed) cruise control mode:
While cruise control is off, press the CRUISE ON/OFF button 01 and hold it down for more than 1.5 seconds. The CRUISE indicator light will illuminate.
Accelerate to the desired speed.
Push down on the COAST/SET switch and release it. The SET indicator light will illuminate.
Cruise control should be set to the desired speed.
To switch between the two cruise control modes:
When one of the two cruise modes is in use, you must turn the system off, and then turn it on
again to select the other cruise control mode.
For more information, refer to the “Starting and driving (section 5)” of your Owner’s Manual.
Fuel-Filler Door
The fuel-filler door is located on the passenger’s side of
the vehicle.
When the doors of the vehicle are locked or unlocked,
the fuel-filler door is automatically locked or unlocked
at the same time.
To open the door, once unlocked, push the upper left
side of the door.
For more information, refer to the “Pre-driving checks and adjustments
(section 3)” of your Owner’s Manual.
19
s yste m g u i d e
Trip Computer
When the
button 01 is pressed, the following
modes will appear on the dot matrix liquid crystal
display 02 :
• MPG – Displays the current fuel consumption.
01
• MPG/MPH – Displays the average fuel consumption
and speed since the last reset.
03
• TIME/MILES – Displays the elapsed time and total
distance the vehicle has been driven since the
last reset.
• RANGE – Displays the estimated distance to empty
(dte) the vehicle can be driven before refueling.
02
• OUTSIDE TEMP – Displays the exterior air
temperature including a low temperature
warning feature.
• SETTING – Allows you to set reminders for alerts and maintenance intervals or change the
language and units used in the system.
—Press the
button 03 to cycle through the various setting modes.
—Press the
button 01 to choose the selected menu.
• WARNING – If there are any.
For more information, refer to the “Instruments and controls (section 2)” of your Owner’s Manual.
Bluetooth® Hands-free Phone System
With an overhead microphone and sound
transmitted through the audio system speakers,
the Bluetooth® Hands-free Phone System utilizes
Bluetooth wireless technology and voice recognition
to provide hands-free cellular phone communication.
Bluetooth® Controls
A cellular telephone should not be used while driving
so full attention may be given to vehicle operation.*
SYSTEM OPERATING TIPS
Close all windows. Surrounding noises may interfere
with system operation and performance.
Press the or
button on the steering wheel to
activate voice recognition.
Wait for the tone before speaking.
Begin speaking a command within 5 seconds of the tone.
*Some jurisdictions prohibit the use of cellular telephones while driving.
20
Microphone
Speak in a clear and natural voice without pausing between words.
Look straight ahead and avoid speaking too loudly or too softly.
To go back to the previous command, say “Go back”.
To cancel a voice recognition session, say “Exit” or press and hold the
To interrupt the system voice and give a command quickly, press the
or
or
button.
button.
When speaking Phonebook names, please be aware some phones require the last name to be
spoken before the first name. For example, “Michael Smith” may be spoken as “Smith Michael”.
To increase or decrease the volume of the voice prompts, push the volume control switches
or + on the steering wheel or turn the VOL/ON•OFF control knob on the audio system while
the system is responding.
If the Voice Recognition system does not recognize your voice commands, train the system
using the Speaker Adaptation Mode. See your Owner’s Manual for detailed information.
Some commands are not available while the vehicle is in motion.
The “Help” command can be used to hear a list of available commands at any time.
Please refer to the cellular phone manufacturer’s Owner’s Manual for detailed information
regarding your Bluetooth phone.
Bluetooth® System with Navigation* (if so equipped)
CONNECTING PROCEDURE
NOTE: The vehicle must be stationary when connecting
the phone.
1.Press the phone button on the instrument panel or
the button on the steering wheel and select the
“Connect Phone” key.
2. Initiate connecting from the phone.
•
The connecting procedure varies according to each
cellular phone model. For detailed connecting
instructions and a list of compatible phones,
please visit www.InfinitiUSA.com/bluetooth.
• When prompted for a PIN code, enter “1234”
from the handset. (The PIN code is assigned
by INFINITI and cannot be changed.)
3.When the connecting is complete, the screen will
return to the Phone menu display.
*Some jurisdictions prohibit the use of cellular telephones while driving.
21
s yste m g u i d e
PHONEBOOK SETUP
Depending on your cell phone, the system may automatically download your cell phone’s entire
phonebook to the vehicle’s Bluetooth system.
If the phonebook does not download automatically, the vehicle phonebook may be set for up to
1,000 entries.
To manually download entries:
1.Press the button and select the “Vehicle
Phonebook” key.
2.Select the “Add New” key at the top of the display.
There are different methods to input a phone
number. Select one of the following options:
• “Copy from Call History” to save a number from
the Outgoing, Incoming or Missed Calls lists.
• “Copy from the Handset” to save a number that
has been downloaded from your handset to
the vehicle.
• “Enter Number by Keypad” to input the number
and name manually.
MAKING A CALL
To make a call, follow this procedure:
1.Press the button on the steering wheel. The “Phone”
menu will appear on the control panel display.
2. Select the “Vehicle Phonebook”, “Call History”,
“Handset Phonebook” or “Dial Number” key.
3. Select the desired entry from the list.
4. Select “Call” to start dialing the number.
RECEIVING/ENDING A CALL
To accept the call, press the button on the steering
wheel or touch the “Answer” key. To reject the call,
touch the “Reject Call” key.
To hang-up, press the
“Hang-Up” key.
22
button or touch the
Bluetooth® System without Navigation* (if so equipped)
PAIRING PROCEDURE
1.Press the
button on the steering wheel. The
system announces the available commands.
2.Say “Connect Phone”. The system acknowledges the
command and announces the next set of available
commands.
3.Say “Add Phone”. The system acknowledges the
command and asks you to initiate connecting from
the phone handset.
4. Initiate pairing from the phone.
• T he connecting procedure varies according to each cellular phone model. For detailed
connecting instructions and a list of compatible phones, please visit
www.InfinitiUSA.com/bluetooth.
• W
hen prompted for a PIN code, enter “1234” from the handset. (The PIN code is assigned
by INFINITI and cannot be changed.)
5.The system asks for a name for the phone. Say “Yes”. The system acknowledges the command
and registers the cellular phone.
PHONEBOOK REGISTRATION
When the cellular phone is connected to the in-vehicle module, the data stored in the cellular
phone such as phonebook, outgoing call logs, incoming call logs and missed call logs is
automatically transferred and registered to the system.
The availability of this function depends on each cellular phone. The copying procedure also
varies according to each cellular phone. See your cellular phone Owner’s Manual for more
information.
Up to 1,000 phone numbers per registered cellular phone can be stored in the phonebook.
MAKING A CALL
1.Push the
button on the steering wheel. A tone will sound.
2.Say “Call”. The system acknowledges the command and announces the next set of
available commands.
3.Say the registered person’s name. The system acknowledges the command and announces
the next set of available commands.
4.Say “Yes”. The system acknowledges the command and makes the call.
RECEIVING/ENDING A CALL
To accept the call, press the
button.
To hang-up, press the
button on the steering wheel. To reject the call, press the
button.
*Some jurisdictions prohibit the use of cellular telephones while driving.
For more information, refer to the “Monitor, climate, audio, phone and voice recognition systems (section 4)” of your Owner’s Manual
or please visit www.InfinitiUSA.com/bluetooth.
23
s yste m g u i d e
01
02
03
04
08
09
05
06
07
10
11
Navigation System (if so equipped)
01 Touch screen display.
02 Destination (DEST) – Press to enter a destination.
03 Information (INFO) – Press to display the vehicle, traffic (if so equipped), weather (if so
equipped) or voice recognition information.
04 SETTING – Press to access the system settings.
05 Multi-Function Controller
• ENTER – Press the ENTER button to select the highlighted item on the screen.
• Center Dial – Turn the dial to highlight an item on the screen, adjust a setting or adjust the
map scale.
• Slide the controller (push upward/downward/leftward/rightward) to select an item on the
screen, to adjust a setting or scroll the map in 8 directions.
06 ROUTE – Press to access guidance control functions such as guidance cancellation, route
24
priority or waypoint setting on the route.
07 MAP – Press to display the map. While following a programmed route, press multiple times to
change the type of route information.
08 STATUS – Press multiple times to display audio information, the air conditioner status, fuel
economy or navigation directions.
09 – Press to switch between the day screen (bright) and the night screen (dark). Press and
hold the button to turn the display off. Press again to turn the display on.
10 BACK – Press to return to the previous screen. In a settings screen, this button can also be
used to apply the setting. In a character input screen, this button can also delete the characters
that have been entered.
11 VOICE – Press to hear the current voice guidance for a programmed route.
For more information, please refer to your Navigation System Owner’s Manual.
DVD Player (if so equipped)
This system allows you to play video files via a DVD
or CD from the front display.
T o view movies on the front display, stop the vehicle
in a safe location, move the shift lever to the P (PARK)
position and apply the parking brake.
To reduce driver distraction, movies will not be shown
on the front display while the vehicle is in any drive
position.
For more information, refer to the “Monitor, climate, audio, phone and voice
recognition systems (section 4)” of your Owner’s Manual.
HomeLink® Universal Transceiver
The HomeLink® system can learn
and consolidate the functions
of up to three different handheld transmitters, operating
items such as garage doors,
property gates, outdoor and
indoor lights or alarm systems.
Homelink®
For more information, refer to the “Instruments and controls (section 2)” of your Owner’s Manual, the HomeLink® website at
www.homelink.com or call 1-800-355-3515.
25
Printing: April 2012 (03) / QR3E HY51U0 / Printed in USA
This Quick Reference Guide is intended to provide an overview of some of the unique features
of your new vehicle. See your Owner’s Manual, which contains important safety warnings and
information about the operation and maintenance of your vehicle, for complete details. Nissan
North America, Inc. reserves the right to make changes, at anytime, without prior notice, in prices,
colors, materials, equipment, specifications, and models and to discontinue models or equipment.
Due to continuous product development and other pre- and post-production factors, actual vehicle,
materials and specifications may vary. Some vehicles are shown with optional equipment. See
the actual vehicle for complete accuracy. Specifications, options and accessories may differ in
Hawaii, U.S. territories and other countries. For additional information on availability, options or
accessories, see your INFINITI retailer or contact Nissan North America, Inc.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement