Catalogue Sheet: EA Series - Extruded Aluminum Pictogram

Catalogue Sheet: EA Series - Extruded Aluminum Pictogram
Project/Location:
Contractor:
EA Series
Date:
Extruded Aluminum Pictogram Sign
Prepared by:
FEATURES
TYPICAL SPECIFICATIONS
• Durable extruded, one-piece aluminum housing and face plates
Supply and install the Emergi-Lite® EA Series pictogram Exit
Signs. The equipment shall operate with universal 2-wire AC input
voltage of 120 to 347VAC at less than 2.5W and universal 2-wire
DC input voltage from 6 to 24VDC at less than 1.5W for single and
double face signs. The equipment shall be suitable for wall, end, or
ceiling mount. The housing shall be constructed of rugged extruded
aluminum and have a maximum depth of 2-1/2”. The faceplate(s)
shall be constructed of extruded aluminum and shall incorporate
a protective clear polycarbonate panel. Each face plate shall come
standard with two legend films for pictogram and direction selection.
The light source shall be white light-emitting diodes (LED) and shall
provide even illumination in normal and emergency operation. The
pictogram Exit Sign in a Self-Powered configuration shall use a
sealed Nickel-Cadmium battery of 2.4V nominal voltage and shall
stay illuminated during emergency operation for at least two hours
upon AC failure.
The pictogram Exit Sign shall meet CSA 22.2 No.141-10.
• White LED light source
• Supplied standard with two pictogram films per face, for direction
selection
• Meets or exceeds CSA 22.2 No.141-10 standard for pictogram exit
signs
• Universal AC input: two-wire 120 to 347VAC; standard DC input:
two-wire 6 to 24VDC
• Energy efficient – consumes less than 2.5W in AC or DC-remote
mode
• Self-Powered model gives standard two hours of back-up lighting
• Universal mounting – end, wall or ceiling
• Easy access to wiring entry for all mounting options
• Comes standard with the Emergi-Lite® EZ2 canopy for quick and
easy installation
The equipment shall be Emergi-Lite® Model:
.
WIRE GUARDS
460.0079-E
DIMENSIONS
Wall mount
460.0027-E
End mount
460.0028-E
Ceiling mount
Dimensions are approximate and subject to change.
PICTOGRAM
STRAIGHT FROM HERE
73/4” [19.7 cm]
63/8” [16.2 cm]
< PICTOGRAM
LEFT FROM HERE
131/8” [33.3 cm]
PICTOGRAM >
RIGHT FROM HERE
83/4” [22.3 cm]
43/4” [11.9 cm]
21/2” [6.3 cm]
141/8” [35.9 cm]
POWER CONSUMPTION
MODEL
AC SPECS
DC SPECS
AC-only
120 to 347VAC
Less than 2.5W
-
-
AC/DC standard
120 to 347VAC
Less than 2.5W
6 to 24VDC
Less than 1.5W
Less than 2.5W
AC/Special DC
120 to 347VAC
Less than 2.5W
36, 48, 120VDC
Two-wire 120V AC/DC
120VAC
Less than 2.5W
120VDC
Less than 2.5W
Self-Powered
120 to 347VAC
Less than 3W
Nickel-Cadmium battery
Minimum two hours
ORDERING INFORMATION
SERIES
FACES / MOUNTING
EA= pictogram
exit Sign
1= s ingle face,
universal mount
2= d
ouble face,
universal mount
3= u
niversal face,
universal mounting
COLOURS
A= b
rushed
aluminum
B= black
G= grey
W= factory
white
Other colours
available.
VOLTAGE
U= 1
20 to 347VAC; 6 to
24VDC
I= 1
20 to 347VAC; selfpowered/2 hours
U00= 120 to 347VAC only
U36= 120 to 347VAC; 36VDC
U48= 120 to 347VAC; 48VDC
U120= 120 to 347VAC;120VDC
2120= 2-wires 120VAC/VDC
EXAMPLE: EA1WUTP
33
IDN= self-powered diagnostics
NiCad,120/347VAC
NEX= NEXUS® system interface*
NEXRF= wireless NEXUS® system
interface*
*Not all options available with Nexus®
system. Please consult your sales
representative.
OPTIONS
TP= tamper-proof screws*
VR= vandal-resistant
shield and tamperproof screws*
*Option VR not available on
universal face
*990.0119-E= tamper-proof bit
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement